Threshing device is the core component of grain combine harvester, and its working performance determines the working quality and production efficiency of the harvester to a great extent. The straw guide plate plays an important role in the threshing device to dredge the threshing matter and control the threshing time of the combine harvester matter in the threshing chamber. In the past, the guiding structure of threshing device could not optimize the working performance of the machine by adjusting the spiral angle, that is, most cereal combine harvester may not be fed smoothly or even clogged when operating under different crop types, yield differences and operating environments, a kind of threshing device with adjustable guide straw board was studied. In this study, the movement model of the straw on the straw guide plate was analyzed, and it was found that the spiral angle “α”of the straw guide was 0<α<58°.Three-factor and three-level response surface method was used to carry out field experiment on drum speed, working speed and guide grass plate spiral angle, and the experimental data were analyzed by quadratic polynomial regression.The results show that the drum speed, working speed and the spiral angle of the guide grass plate have significant effects on the loss rate (PLR) , impurity content (PIR) and breakage rate (PBR) , the drum speed and working speed have an interactive effect on the impurity ratio (PIR) , and the working speed and the helical angle of the guide grass plate have an interactive effect on the loss ratio (PLR) and breakage ratio (PBR) , there is an interaction between the rotary speed of the roller and the helical angle of the guide grass plate on the crushing rate (PBR) .Further optimization analysis showed that the predicted value was PLR = 1.18% , PIR = 0.72% , PBR = 0.53% , the experimental verification value was PLR = 1.26% , PIR = 0.73% , PBR = 0.61% . The absolute error between the experimental value and the predicted value was very small, however, the optimized field test verified value decreased by 8.31% , 50.04% and 60.30% respectively, which indicated that the optimized harvester had better operation quality, in particular, PIR, PBR and other two indicators have a greater increase in the effect.

The present study took into account the influence of local cuisine in the restaurants awarded Michelin stars in Phuket Old Town, influenced by Chinese cultural diffusion to other cultures contributing to a unique culture in the Malay Peninsula. It sought to investigate components of local gastronomic tourism and perceived value towards the Michelin Guide’s assessment criteria of local cuisine in Phuket Old Town, delving into the relationship between these two factors. In particular, a structural equation model (SEM) was adopted to explore such a relationship, with an exploratory factor analysis (EFA) and a confirmatory factory analysis (CFA) to assess a measurement model of latent variables and accuracy and reliability of the structure. The study was conducted in the context of Phuket Old Town, Phuket Province, Thailand, renowned as a City of Gastronomy. The results demonstrated that the phenomenon of local cuisine in Phuket Old Town embodied the perceived value of local cuisine, origins, history, traditions, rituals, and unique lifestyles; particularly, the components of local gastronomic tourism reflected the significance of food products in the food industry, together with the organization of local cuisine activities and festivals. This finding contributed to an understanding of the reasons behind the perceived value among consumers traveling to this town to gain experiences of local cuisine in the restaurants awarded with Michelin stars. It could serve as a policy for improving food establishments’ quality and standards based on the specified criteria to foster sustainable gastronomic tourism in Thailand.

Although ladybirds of European Russia and the Caucasus have been the subject of numerous ecological and faunistic investigations, there is an evident lack of appropriate identification key for them. All previous keys have been published in Russian. The most modern key was published more than 50 years ago and included only about 60 % of species. Guides for identification of Coccinellidae of other countries are not appropriate for European Russia, since do not include many species occurring in the regions. New, original key to subfamilies, genera, and species of ladybirds (Coccinellidae) of the European Russia and Russian Caucasus is presented. All native species recorded in the region and all alien species introduced to this region are included. Some species from the adjacent regions are added. In total, 110 species are keyed and illustrated with line drawings. Photographs of rare and endemic species are provided. Information on the distribution of species within the region under consideration is provided. Synonymy of Chilocorus kuwanae with Ch. renipustulatus is presented and discussed.

Building Information Modeling (BIM) has been one of the overwhelming trends in the worldwide. In Korea, from 2012, BIM application to the public construction projects worth more than $40 million was mandated. However, despite the policy, many public owners have hesitated to apply BIM to their projects. They generally view BIM very complex to manage and difficult to understand. While there have been diverse BIM guides as a reference, most of them have developed from BIM suppliers’ perspective involving certain deficiency in meeting the public owners’ taste. The public owners have addressed the necessity for developing an owner-oriented BIM guide on which they can understand the overall BIM procurement process thereby efficiently preparing their BIM service contracts. The main objective of this study is to develop the structure and contents guidance of the new guide to be developed that follows the public business process and mitigates the deficiency. To meet the research objective, a number of domestic and international BIM guides were analyzed and workshops were operated twice with the 12 BIM experts from the Korean construction industry. As a result of the study, a four-staged guide structure was developed consisting of the BIM service Scoping, Tendering, Executing, and Wrapping-up (STEW) guides.

This article investigates the source of booming noise emanating from the tailgates of electric vehicles, along with proposed strategies to mitigate it. This study involved the measurement of booming noises during on-road vehicle tests to pinpoint their origins. Additionally, operational deflection shapes (ODS) were extracted from the tailgate vibration signals to gain insight into its dynamic behavior. Modal tests were conducted on the tailgate to determine its dynamic characteristics and compared with driving test results to reveal the mechanism responsible for tailgate-induced booming noise. It was established that such noise is primarily due to the tailgate modes resulting from a combination of rigid body motion in the fore-aft direction and deformation in the central section of the panel. An analytical model of the tailgate was developed using commercial finite element analysis software to propose measures for reducing booming noise. Experimental findings validated the model accuracy. Structural enhancements were implemented to enhance the panel stiffness and improve the connection between the vehicle and tailgate via bushings to dampen the booming noise resulting from tailgate motion. Under random force inputs, analytical results demonstrated a 13.8% reduction in maximum deformation in the tailgate model in the improved structural configuration with increased panel stiffness.

The purpose of this in vitro study is to evaluate the effectiveness of incorporating a new irrigation system into a surgical guide and monitor its effect on heat generation during implant bed preparation. A total of 48 surgically guided osteotomies were performed on 12 bovine ribs divided into 4 groups, using different irrigation techniques: Group A (test) had entry and exit channels incorporated into the guide; Group B had a similar design with an entry channel only; Group C had conventional external irrigation; Group D (control) had no irrigation. Heat generation during the osteotomies was measured using thermocouples placed at a depth of 2 mm and 6 mm. The lowest mean temperature was observed in Group A (22.1°C at 2mm and 21.4°C at 6mm), this was statistically significant when compared with Groups C and D (p&lt;0.001). Group A showed a lower mean temperature compared with Group B as well, however statistically significant only at 6mm depth (p&lt;0.05). In conclusion, the proposed guide has significantly reduced heat generation during implant osteotomy. The integration of an exit cooling channel can resolve limitations found in previously designed surgical guides and can be easily incorporated into computer designing and 3D printing software.

The output of non-ferrous metal smelters is 450,000 tons (3.1% of world output), and copper ranks 10th in the world for health impact evaluation. According to the latest information from smelters, the overall average concentration in 2020 was 8.2 ppb each of SO2, NO2, O3, PM10, and PM2.5. 7.5 ppb, 30.8 ppb, 21.3 μg/m3, and 13.2 μg/m3, and the maximum concentrations were 390 ppb, 50 ppb, 167 ppb, 148 μg/m3, and 107 μg/m3. Art Corporation, A2C (Atmosphere to CFD) model was used to investigate the resident health follow-up management (cohort study) study (SAS Enterprise Guide) as the basis for the source of diffuse pollution in the area. The average concentration of PAHs (polynuclear aromatic hydrocarbons) among carcinogens in the air by survey site was the highest in Seokpo 4-ri (60.7 ng/m3), followed by Seokpo 1-ri (48.6 ng/m3) and Seokpo. Among the respiratory diseases, the disease (Acute upper respiratory tract disease(J00-J06), Other upper respiratory tract diseases (J32-J39), Acute lower respiratory tract infection (excluding pneumonia) (J20-J22), Chronic lower respiratory disease (persons) (excluding J40-J47, J45-J46), Asthma (J45-J46), Rhinitis (J30-J31), Respiratory disease (J00-J99), Cough (R05)) that has a correlation between the exposed area and the control area is as follows.

Currently, there is no specific treatment for COVID-19 proven by clinical trials. WHO and CDC guidelines therefore endorse supportive care only. However, frontline clinicians have been applying several virus-based and host-based therapeutics in order to combat SARS-CoV-2. Medications from COVID-19 case reports, observational studies and the COVID-19 Treatment Guideline issued by the China's National Health Commission (7^th edition published March 3^rd, 2020. Edited translation attached) are evaluated in this review. Key evidence from relevant in vitro researches, animal models and clinical studies in SARS-CoV-2, SARS-CoV and MERS-CoV are examined. Antiviral therapies remdesivir, lopinavir/ritonavir and umifenovir, if considered, could be initiated before the peak of viral replication for optimal outcomes. Ribavirin may be beneficial as an add-on therapy and is ineffective as a monotherapy. Corticosteroids use should be limited without indicating comorbidities. IVIG is not recommended due to lack of data in COVID-19. Xuebijing may benefit patients with complications of bacterial pneumonia or sepsis. The efficacy of interferon is unclear due to conflicting outcomes in SARS and MERS studies. Chloroquine and hydroxychloroquine have shown in vitro inhibition of SARS-CoV-2 and may be beneficial as both prophylactic and treatment therapy. For patients who developed cytokine release syndrome, interleukin-6 inhibitors may be beneficial. Given the rapid disease spread and increasing mortality, active treatment with readily available medications may be considered timely prior to disease progression.

Sexual Violence (SV) can deeply impact victims' physical and psychosocial well-being. Yet many healthcare providers, including registered nurses (RNs), hesitate to screen patients due to a lack of confidence and knowledge. The SATELLITE Sexual Violence Assessment and Care Guide was developed to address this gap; however, the guide’s educational effectiveness remained untested. This pilot study aimed to assess the feasibility, acceptability, and efficacy of an education program based on the SATELLITE guide among RNs in clinical settings, using a pre- and post-test design. Results indicated that the education was not only feasible and acceptable, but also demonstrated the effects as desired with significant increases in RNs' knowledge and confidence in SV screening and care. The program's assessment tool was valid and reliable, and participant recruitment was feasible. Based on these findings, it is recommended that the SATELLITE education program be further tested with a larger RN sample and extended to other healthcare providers. Additionally, exploring different regions, cultural contexts, and healthcare settings would enhance understanding of the program's broader applicability and effectiveness.

Abstract: The widespread and popular use of TADs for orthodontic anchoring has become a daily routine in clinical orthodontic treatment. However, as there have been many accidents over the past decade, safety action is needed to help reduce these accidents. We have advocated using the surgical guide and developed a procedure that can benefit patients and orthodontists. The first part of this paper is about the rationale for making the surgical guide for various implant placements that were observed. Due to their anatomical structure, some placements may require particular attention, which is focused on and discussed in length. The second part deals with fabricating the surgical guide in the laboratory procedure. The data from the intraoral SLT acquisition was extracted, and with the DICOM data from CBCT and in a 3-Shapes software, the guidance was designed. The detailed and step-by-step laboratory procedure, CAD/CAM, and 3D printers to make the surgical guide for TADs are explained. The procedure is performed in an easy-to-understand manner to make using the surgical guide possible for the daily practice of orthodontics (Pubmed).

Peripheral nerve injuries (PNI) can have several etiologies, such as trauma and iatrogenic interventions that can lead to the loss of structure and/or function impairment. These changes can cause a partial or complete loss of motor and sensory functions, physical disability, and neuropathic pain, what in turn can affect the quality of life. For those reasons, PNI is a major public health concern. This review aims to revisit the concepts associated with the PNI. First, the anatomy of the peripheral nerve is detailed to explain the different types of injury. Then, some of the available therapeutic strategies are explained, including surgical methods, pharmacological therapies, and the use of cell-based therapies alone or in combination with biomaterials in the form of tube guides. Nevertheless, even with the various available treatments, it is difficult to achieve a perfect outcome with complete functional recovery. This review aims to explain the urge for new approaches and to understand the methods to evaluate nerve regeneration in a One Health perspective. In vitro models followed by in vivo models are very important to be able to translate the achievements to human medicine.

Recently, due to the miniaturization of electronic products, printed circuit boards (PCBs) have also become smaller. This trend has led to the need for high-precision electrical test equipment to check PCBs for disconnections and short circuits. The purpose of this study is to improve the position repeatability of the platform unit up to ±2.5 μm in a linear stage type test equipment. For this purpose, the causes of position errors of the platform unit are analyzed. The platform unit holding the PCB is driven by a single-axis linear ball screw drive system offset from its geometric center due to design constraints. The yaw rotation of the platform is found to have a dominant effect on position repeatability. To address this problem, the methods of adding balancing weights to the platform unit and adjusting the stiffness of LM Guides are proposed. This reduces the yaw rotation by moving the centers of mass and stiffness closer to the linear ball screw actuator. In the verification tests, the position repeatability was decreased to less than ±1.0 μm.

As the first time, 0D-1D-3D and fully 3D steady-state aero-thermo-fluid simulations of a structural oil-to-air Fan Outlet Guide Vane Cooler (FOGVC) in a jet engine are presented. Using the commercial softwares Ansys Fluent, the thermo-mechanical module of Ansys and the 1D fluid solver Flownex, 5 simulation types (3D fully conjugate heat transfer with and without a thin wall model, 3D with a thin wall model, 1D-3D coupled, 1D and 0D) corresponding to 4 levels of simplification in 3 possible domains (oil, oil-metal and oil-metal-air) have been compared to provide selection criteria when a determined level of accuracy in the simulations without prohibited computational times is desired. The methodologies are applied to two different oil internal cavities: an inverted U with rectangular cross section and a coil internal cavity with a circular cross section. The obtained results show that depending on the scope of the research (outlet oil temperature, dissipated heat rate or oil pressure drop) and the accuracy of the results, one method or the other may be used. Experimental data would be needed to validate the numerical results by all employed methodologies and geometries.

Individuals residing in more deprived areas have a lower diet quality. While several studies have shown that individuals with a lower diet quality have a higher mortality risk, a low quality diet might also lead to poor health in highly deprived areas. We aimed to examine the association between deprivation within an area and all-cause mortality risk according to diet quality. Methods: We conducted a population-based prospective study on 27994 men and 33273 women aged 45–75 years. Neighborhood deprivation was assessed using the Japanese areal deprivation index (ADI). Dietary intakes were assessed using a validated 147-item food frequency questionnaire. Subsequently, Japanese Food Guide Spinning Top scores were calculated. Hazard ratios (HR) and 95% confidence intervals (CI) of mortality were calculated according to tertiles of ADI by diet quality score. Results: Individuals residing in the most deprived area had the lowest dietary scores. During the 16.7-year follow-up, compared to individuals with a high quality diet residing in the least deprived area, individuals with a low quality diet had a higher risk of mortality according to increment of ADI (P trend = 0.02); the multivariate adjusted HR (95% CI) was 1.07 (1.00-1.15), 1.15 (1.07-1.24), and 1.18 (1.08-1.29) in those residing in the lowest through the highest third of ADI, respectively. However, individuals with a high quality diet had no significant association between ADI and mortality (P trend =0.87). Conclusion: A well-balanced diet may prevent early death associated with neighborhood socioeconomic status among those residing in highly deprived areas.

The optimization of guide vane closing schemes (OGVCS) of pumped storage hydro unit (PSHU) is the research field of cooperative control and optimal operation of pumped storage, wind power and solar power generation. This paper presents a OGVCS model of PSHU considering the rise rate of the unit rotational speed and the specific node pressure of each hydraulic unit, as well as various complicated hydraulic and mechanical constraints. OGVCS model is formulated as a multi-objective optimization problem to optimize conflictive objectives, i.e., unit rotational speed and water hammer pressure criteria. In order to realize the efficient solution of the OGVCS model, an enhanced multi-objective bacterial-foraging chemotaxis gravitational search algorithm (EMOBCGSA) is proposed to solve this problem, which adopts population reconstruction, adaptive selection chemotaxis operator of local searching strategy and Elite archive set to efficiently solve the multi-objective problem. Especially, novel constraints-handling strategy with eliminating and local search based on violation ranking is used to balance various hydraulic and mechanical constraints. Finally, simulation cases of complex extreme operating conditions (i.e., load rejection and pump outage) of ‘single tube-double units’ type PSHU system are conducted to verify the feasibility and effectiveness of the proposed EMOBCGSA in solving OGVCS problem. The simulation results indicate that the proposed EMOBCGSA can provide lower rise rate of the unit rotational speed and smaller water hammer pressure than other method established recently while considering various complex constraints in OGVCS problem.

The paper presents an analysis of the latest developments in the field of stereo vision in the low-cost segment, both for prototypes and for industrial designs. We described the theory of stereo vision and presented information about cameras and data transfer protocols and their compatibility with various devices. The theory in the field of image processing for stereo vision processes is considered and the calibration process is described in detail. Ultimately, we presented the developed stereo vision system and provided the main points that need to be considered when developing such systems. The final, we presented software for adjusting stereo vision parameters in real-time in the python language in the Windows operating system.