Despite being an abundant marine organism in Indonesia, black sea cucumber is still underutilised due to its slightly bitter taste. Previous studies have hinted at the potential of black sea cucumber as an anti-cancer agent. However, specific identification of bioactive compounds that can interact with cancer proteins is still lacking. In the same place, cancer ranks third as Indonesia's leading cause of death. Therefore, this study aims to identify potential anti-cancer compounds from black sea cucumbers using a comprehensive in silico drug discovery approach. This research uses machine learning, molecular docking, and ADMET analysis to identify bioactive compounds that specifically interact with cancer proteins. A combination of the Cascade Deep Forest algorithm and ECFP-AAIndex1 feature combination proved to be the most effective in predicting these interactions. Through molecular docking validation, four bioactive compounds with strong binding affinity were identified: Afimoxifene, Danazol, Taxifolin, and Terfenadine. ADMET analysis highlighted Taxifolin as the most promising candidate, as it passed most ADMET parameters. Further wet laboratory studies are required to confirm the effects and potential of these compounds as anti-cancer agents. This study builds a foundation for future investigations into alternative cancer treatments using abundant natural resources.

Poly(3,4-ethylenedioxythiophene) (PEDOT) with a dopant of polystyrene sulfonate (PSS), namely PEDOT:PSS, has been mostly used as counter electrode to give a high performance of dye-sensitized solar cells (DSSCs). Recently, PEDOT doped by carrageenan (PEDOT:Carrageenan) was introduced as a new material to be applied on DSSC as electrolyte. PEDOT:Carrageenan has a similar synthesis process as PEDOT:PSS owing to their similar ester sulphate (-SO3H) groups in both PSS and carrageenan. This review provides an overview of the different roles between PEDOT:PSS as counter electrode and PEDOT:Carrageenan as electrolyte for DSSC applications. The synthesis process and characteristics of PEDOT:PSS and PEDOT:Carrageenan were also described in this review. In conclusion, we found that PEDOT:PSS as counter electrode has the main roles of transferring electrons from the external circuit and accelerating the reduction reaction of redox coupled with its high electrical conductivity and high electrocatalytic activity. As electrolyte, PEDOT:Carrageenan has not shown the main role as an electron transfer from counter electrode to regenerate the dye-sensitized at the oxidized state due to its low ionic conductivity. Therefore, PEDOT:Carrageenan still obtained a low performance of DSSCs. Additionally, the future perspective and challenges of using PEDOT:Carrageenan as both electrolyte and counter electrode are described in detail.

Cassava Solid waste (Onggok) is a solid waste from the cassava-based tapioca industry, the starch content in Onggok is still 50-80 wt.% of residual starch, which can be used to produce maltodextrin for foods application. Furthermore, using cassava solid waste is beneficial in terms of the cost of raw materials. The starch content in cassava can be modified through enzymatic hydrolysis using α-amylase and β-amylase enzymes at 80oC and pH 5.5. Enzymatic hydrolysis was done using mixed enzymes that varied the concentration of α-amylase at 0,.1% and the β-amylase enzymes at 0.05, 0.1, and 0.5%. the concentration of cassava waste (Onggok) varied from 4%, 7%, 10%, and 13%. The optimum concentration of α-amylase and β-amylase enzymes are 0.1% and 0.1% respectively at time intervals of 1 minute resulting in a dextrose equivalent (DE) value 0f 5.7. The characteristics of maltodextrin were studied using scanning electron microscopy (SEM) to determine the morphology of the starch structure which had changed due to the enzyme hydrolysis. Simultaneous thermal analysis (STA) was studied to determine the Thermal stability of hydrolysis products. Maltodextrin produced from cassava waste (Onggok) has a DE value < 10, which has the potential to be used in the pharmaceutical industry

Propolis is known to have many benefits, especially in the health sector. Due to the sharp aroma &amp; taste, and the phenolic compounds contained in propolis are easily oxidized &amp; hydrolyzed at high temperatures, the application of propolis in the food sector is still lacking. Microencapsulation with a coacervation complex is used to overcome these problems. The thickness of the coating material is an important factor in the microencapsulation of complex coacervation. This study aimed to determine the coating ratio used to produce propolis microcapsules with the highest phenolic stability during storage and heating. This study consisted of three treatment ratios of whey protein isolate (WPI) &amp; pectin coating materials 1:2, 1:1, and 2:1. The results showed that the yield value ranged from 37.279-40.116%, aw 0.375-0.529, and encapsulation efficiency 85.45-96.44%. The color of the microcapsules produced was bright (L* = 94.28-95.35%), tended to be reddish (a* = 0.07-0.11) &amp; yellowish (b* = 4.36-4.83). The difference in the ratios treatment significantly affected the storage stability, while the heating stability ratio only significantly affected the 2:1 treatment. The best total phenolic stability of propolis microcapsules during storage &amp; heating was obtained by 1:1 treatment with retention values of 97.31% and 63.86%.

Background: Corrosive injuries (CI) became medical problems related complications include esophageal, pyloric stricture, squamous cell carcinoma [1], physical and quality of life [2]. Endoscopic dilatation (ED) is primary therapy [3]. The ultrathin endoscope assisted method is potentially safe and useful in avoiding technical failure [4]. Methods: Retrospective study of esophageal and/or pyloric stricture after CI who underwent di-latation at Soetomo General Hospital (July 2018 – July 2022). One-biweekly ED using Ultrathin Endoscope Assisted Method then continued by Through The Scope (TTS) balloon or Bougie dila-tor. Target diameter is 14mm. Clinical outcome included successful, refractory, recurrent rate and complications related procedures Results: Fifteen patients with stricture related CI. Eleven patients underwent ED with total 73 procedures. Mean age 31,45 years, Male 6(54,6%), suicide attempt 7(63,6%), acid agent 9(81,8%) located at esophagus 3(27,3%), pylorus 3(27,3 %), or both 5(45,4%). Number of esophageal dilata-tion to achieve target 14mm was 1-2 and 2-15 procedures for simple and complex stricture with overall successful, recurrent and refractory rate were 75%, 12.5% and 12.5% respectively. Pyloric dilatation outcome were 62.5%, 25% and 12.5% for successful, recurrent and refractory rate re-spectively. Conclusions: Stricture-related corrosive injury has predominantly complex anatomical structure, more sessions are required and lower clinical outcome

There is currently no set of instruments or procedures to evaluate the effectiveness of cross-sectoral collaboration in the current CFC program. This study aimed to develop a tool for evaluating the cross-sectoral contributions to the CFC program. A paper-based questionnaire was developed by the research team after a preliminary qualitative procedure, and it was subsequently employed to collect data. This process resulted in 17 indicators (41 items) of cross-sectoral collaboration in the development of the CFC in Makassar. These indicators were categorized into five dimensions: governance, administration, autonomy, mutuality, and norms. There were 32 items remaining after several items that were determined not to correspond with the model were eliminated prior to the CFA analysis. According to the CFA results, the five-domain model corresponded to the data with standardized loading factor (SLF)<0.5, indicating that the convergent validity of SLF was acceptable. In addition, these results suggested that the items employed in the tool were really significant in reflecting these five domains. The developed and validated tool was expected to be beneficial in evaluating cross-sectoral collaboration in the CFC program developed in Makassar City. The findings of this study would serve as a benchmark indicator, enabling the assessment process to gauge the significance with which a city is developing with cross-sectoral restriction measures.

Spatial approach based on the deformation measurement of volcanic dome and crater rim is key to evaluate the activity of a volcano, such as Merapi volcano where associated disaster risk is regularly taking lives. Within this framework, this study aime to detect localized deformation and change in the summit area that has occurred concomitantly with the dome growth and explosion reported. The methodology was focused on two sets of data, one LiDAR-based dataset of 2012 and one UAV-dataset of 2014. The results show that during the period 2012-2014, the crater walls are 100 m to 120 m high above the crater floor at its maximum (North to East-South-East sector), while the West and North sector presents a topographic range of 40 to 80 m. During the period 2012 – 2014, the evolution of the crater rim around the dome is generally stable (no large collapse). The opening of a new vent on the surface of the dome has displaced an equivalent volume of 2.04 E+04 m3 corresponding to a maximum -9 m (+/- 0.9 m) vertically. This concludes that during the period 2012 – 2014 when the dome of Merapi experienced phreatic or phreatomagmatic explosions, the topography around the dome rose. This rise does not seem to be related to large wall collapses, and it is likely that modification in the subsurface have triggered those changes.