membrane separation technology shows promise, particularly gas separation membranes, including ceramic membrane. Ceramic membranes are increasingly gaining attention for their acid and alkali stability, corrosion resistance, high-temperature tolerance, and mechanical strength. This study focuses on alumina support ceramic membrane for CO2 capture. The membranes were characterized using contact angle measurements, scanning electron microscopy (SEM), and Fourier Transform Infrared spectroscopy (FTIR) analysis. The contact angle measurements confirmed the hydrophilic, while SEM analysis showed even particle distribution in the alumina ceramic membranes respectively. EDAX analysis revealed the elemental composition in the alumina support matrix. FTIR analysis demonstrated chemical interactions of the support membrane. Single gas permeation experiments were conducted. It can be observed that Nitrogen gas permeated faster with increase in feed pressure through the unmodified ceramic inorganic hydrophobic membrane more than the other two single gases, O2, and CO2). As a result, only high permeance separation membranes with realistic size and pressure conditions may be considered of as a practical alternative for CO2 capture. However, the presence of non-selective defects limited the improvement in selectivity of hydrophilic ceramic membrane. In this case, there is need to modify the ceramic membrane used to increase the flux, permeance of CO2, and selectivity of CO2.

In the present paper, we propose a wavelet method to study the impact of electronic media on economic situations. We precisely apply wavelet techniques versus classical methods to analyze economic indices in the market. The technique consists firstly in filtering the data from unprecise circumstances (noise) to construct next a wavelet denoised contingency table. Next, a thresholding procedure is applied to such a table to extract the essential information porters. The resulting tables subject finally to correspondence analysis before and after thresholding. As a case of study, we are empirically concerned with the 2030 KSA vision in electronic and social media. Effects of the electronic media texts about the trading 2030 Vision on the Saudi and global economy have been studied. Recall that the Saudi market is the most important representative market in the GCC continent. It has both regional and worldwide influence on economies and besides, it is characterized by many political, economic, and financial movements such as the worldwide economic NEOM project. The findings provided in the present paper may be applied to predict future GCC markets situation and thus may be a basis for investors’ decisions in such markets.

Buildings consume 30% of the total energy consumption around the globe and 29% of the energy consumption in Egypt which in 2022 had a total population of 102 million, out of which 43 % live in urban areas . The operation of buildings contributes to around 30% of global CO2 emissions due to their high energy consumption (IEA, 2022a). Among the efforts made towards improving the energy efficiency of buildings are Advanced Energy Design Guides (AEDGs), building rating systems, codes, and standards. Furthermore, numerous research studies that are either literature review studies, experimental studies, or computational studies addressed the topic of energy efficiency in buildings. These are all examined in this literature review with the purpose of identifying the research gap in available research with a focus on Egypt. The identified gap is the development of a prescriptive path for the GPRS energy efficiency category based on whole building energy simulations.

Global warming has been increasing heat stress threat in animals which can be monitored by Temperature Humidity Index (THI). The present study describes the relationship of THI, calculated using 35 years period weather station data, and production performances of dairy cattle in a se-lected area of Bangladesh. The month January and June were identified as the coolest and hottest, respectively. Based on this outcome, every year in the month of January and June production performances of 10 crossbred cows with homogenous characteristics were monitored for a period of 5 years. The average THIMEAN value was found 17% higher in June as compared to January, and with this increment of THIMEAN average milk production was decreased 24.4% (p<0.05). The milk fat and protein content were also reduced (p<0.05) by 14.5 and 15.2%, respectively suggesting negative correlation as like as milk production. However, ash content was increased 15.3% that indicates a positive correlation. In addition, multiple regression analysis revealed each point increase in THIMEAN and rectal temperature, there was a decrease in milk yield 0.04 and 1.17 kg ECM, respectively. In contrary, each point increase in THIMEAN resulted 0.059 C increase of rectal temperature. Taken together, THIMEAN value calculated using metrological station data has distinct relationship with the production performances of lactating crossbred dairy cows.

This paper investigates the physical/virtual dynamics when constructing an immersive environ-ment for medieval courtyard houses in Historic Cairo. Using a VR Lab at a university campus, the paper analyzes a courtyard that symbolizes social resilience and community bonding at the newly rehabilitated Bayt Yakan. The courtyard is reconstructed as a Mixed Object through 3D documentation and scanning the space to develop a photogrammetry and VR experience. The results show that the sense of presence is perceived through a combination of factors and juxta-positions of the real and the virtual including: 1) architectural aesthetics, 2) intangible elements and 3) socio-cultural activities in space. Based on the pilot case study, the paper concludes with proposing a “Geospatial Framework for Immersive Environments and Social Sustainability” that is transdisciplinary, pluralistic and expansive in nature to encompass the multiple narratives of the contested past, and overlay the material and immaterial sustainable features embedded in historical contexts, where the Mixed Reality paradigm becomes an enabler for multiple voices, tools and mediums.

Antimicrobial resistance (AMR) due to community carriage of antibiotic-resistant bacteria is highly prevalent in the WHO South-East Asia region. One of the major reasons is the misuse of antibiotics in animal farming practices and at community level, which threatens both human and animal health. However, this multifaceted One Health (OH) problem of antibiotic use (ABU) in poultry farms and respective farmers is not well studied in countries like Pakistan. Therefore, we conducted n OH cross-sectional study in rural Punjab to explore the current practices of ABU in poultry and poultry farmers, associated factors, their healthcare-seeking behaviour and biosecurity practices. We found all the participating farmers using antibiotics for poultry, 60% of which were Colistin sulphate and Amoxicillin trihydrate. The significant consumption of antibiotics in poultry farms (60%) and poultry farmers (50%) was without prescription. Most of the farms (85%) had no wastewater drainage system, causing direct shedding of poultry waste and antibiotic residue in the surrounding environment. Lack of farmers’ education, professional farm training and duration of farming experience were the significantly associated factors with ABU and knowledge of AMR. Our study implies the necessity of an integrated OH-AMR policy with the inclusion of farmers’ education, mass awareness, and strict antibiotic usage guidelines.

In today's world, the significance of reducing energy consumption globally is increasing, making it imperative to prioritize energy efficiency in the 5th Generation (5G) networks. However, it is crucial to ensure that these energy-saving measures do not compromise the Key Performance Indicators (KPIs) such as user experience, quality of service (QoS), or other important aspects of the network. To address this challenge, advanced wireless technologies have been incorporated into the design of 5G networks across various network layers. Given the rapid advancements in Artificial Intelligence (AI) and emerging technology trends such as Machine Learning (ML), which is considered a subset of AI, the integration of such trends into 5G networks has become a significant area of research. The primary objective of this survey is to analyze AI integration into 5G networks for enhanced energy efficiency. By exploring this intersection between AI and 5G, we aim to identify potential strategies and techniques for optimizing energy consumption while maintaining the desired network performance and user experience.

The makeup of human microbiota has been linked to a number of autoimmune disorders. Recent developments in whole metagenome sequencing and 16S rRNA sequencing technology have considerably aided research into the microbiome and its relationship to disease. Due to the inherent high dimensionality and complexity of data generated by high-throughput platforms, conventional bioinformatics techniques could only provide an inadequate explanation for the most relevant changes and seldom provide correct predictions. Machine learning, on the other hand, is a subset of artificial intelligence applications that enable the untangling of high-dimensional systems and intricate knots in correlation by learning complex patterns and improving automatically from training data without being explicitly programmed. Machine learning is increasingly being utilized to research the influence of microbes on the onset of illness and other clinical features since computer power has increased dramatically in the last few decades. In this review paper, we focused on emerging methodological approaches of supervised machine learning algorithms for identification of autoimmune disorders utilizing metagenomics data, as well as the potential benefits and limitations of machine learning models in clinical applications.

Binderless zeolite macrostructures in the form of ZK-4 microspheres were prepared using anion exchange resin beads as shape directing macrotemplates. The particles were synthesized under hydrothermal conditions at different temperatures and treatment times. The influence of the different synthesis parameters was investigated by X-ray diffraction, scanning electron microscopy, fluorescence X, nitrogen adsorption measurements and ²⁹Si solid NMR. Fully crystalline spheres similar in size and shape to the original resin beads were obtained by a hydrothermal treatment at the highest temperatures (150 - 180 °C) for a short treatment time of 24 h. The synthesized microspheres showed to be promising in the molecular decontamination of Volatile Organic Compounds (VOCs).

Construction 4.0 is witnessing exponential growth in Digital Twin (DT) technology developments and applications, revolutionizing the adoption of Building Information Modelling (BIM) and other emerging technologies used throughout the lifecycle of the built environment. BIM provides technologies, procedures, and data schemas representing building components and systems. At the same time, DT enhances this with real-time data for cyber-physical integration, enabling live asset monitoring and better decision-making. Despite being in the early stages of development, DT applications have rapidly progressed in the AEC sector, resulting in a diverse literature landscape due to the various technologies and parameters involved in fully developing the DT technology. The intricate complexities inherent in digital twin advancements have confused professionals and researchers. This confusion arises from the nuanced distinctions between the two technologies, i.e., BIM and DT, causing a convergence that hinders realizing their potential. To address this confusion and lead to a swift development of DT technology, this study presents a holistic review of the existing research focusing on the critical components responsible for developing DT applications in the construction industry. The study identifies five crucial elements: technologies, maturity levels, data layers, enablers, and functionalities. Additionally, it identifies research gaps and proposes future avenues for streamlined DT developments and applications in the AEC sector. Future researchers and practitioners can target data integrity, integration and transmission, bi-directional interoperability, nontechnical factors, and data security to achieve mature digital twin applications for AEC practices. This study highlights the growing significance of DTs in construction and provides a foundation for further advancements in this field to harness its potential to transform built environment practices.

Abstract: membrane separation technology shows promise, particularly gas separation membranes, including ceramic membrane. Ceramic membranes are increasingly gaining attention for their acid and alkali stability, corrosion resistance, high-temperature tolerance, and mechanical strength. This study focuses on alumina support ceramic membrane for CO2 capture. The membranes were characterized using contact angle measurements, scanning electron microscopy (SEM), and Fourier Transform Infrared spectroscopy (FTIR) analysis. The contact angle measurements confirmed the hydrophilic, while SEM analysis showed even particle distribution in the alumina ceramic membranes respectively. EDAX analysis revealed the elemental composition in the alumina support matrix. FTIR analysis demonstrated chemical interactions of the support membrane. Single gas permeation experiments were conducted. It can be observed that Nitrogen gas permeated faster with increase in feed pressure through the unmodified ceramic inorganic membrane more than the other two single gases, O2, and CO2). As a result, only high permeance separation membranes with realistic size and pressure conditions may be considered of as a practical alternative for CO2 capture. However, the presence of non-selective defects limited the improvement in selectivity of hydrophilic ceramic membrane. In this case, there is need to modify the ceramic membrane used to increase the flux, permeance of CO2, and selectivity of CO2.

Since 2012, the northeast of Tunisia has been experiencing an emergence of dog rabies. Published data revealed that the disease is widespread in the north of Tunisia. Even with studies on rabies, lacking knowledge on the associated risk factors was highlighted. Therefore, we conducted a case-control study on dog rabies in northeast Tunisia to identify potential risk factors for dog rabies occurrence. The cases group (n=77) included positive dog rabies confirmed at the referral laboratory using Fluorescent Antibody Test (FAT) in 2014 and 2018. The controls group (n=77) involved all negative cases received at the laboratory and 15-days quarantine dogs that received a certificate of absence of rabies after the observation period. Univariate and multivariate logistic regression was conducted to explore the risk factors (age, sex, breed, confinement, vaccination status, presence of bites, owned or not and origin of dogs, sector, presence of rabies cases, and slaughterhouses, etc.…) related to the occurrence of rabies. The final logistic regression model revealed that unconfined dogs were almost twice as likely to be affected as confined dogs (OR=1.9; 95% CI: 1.17 to 3.27). The odds of rabies occurrence were 25 times higher in areas where rabies cases have been reported between 3 months and 1 year compared to the uninfected areas (25.7; 95% CI: 3.02-219.14). Similarly, the risk of rabies is significantly higher in dogs born in the home to the owner bitch (OR=2.41; 95% CI: 1.14-5.13). Living in areas with rabies cases in the last three months increases by 2.8 times the risk of getting rabies (2.8; 95% CI: 1.16-6.77). However, vaccination reduces by 1.6 times the risk of contracting rabies (0.6; 95% CI: 0.38-0.97). Our findings provide reliable data on dog rabies that will be very useful for decision-makers and could contribute to improving the ongoing national control program of rabies.

Breast cancer (BC) is the most common type of cancer in both men and women alike, but it is more prevalent in women. Natural compounds that can modulate the oncogenic process can be considered a significant anti-cancer agent for treating BC. These natural compounds are more effective than synthetic drugs, which have profound side effects on the normal cell and resistance to cancer cells. Genistein is a type of dietary phytoestrogen included in the flavonoid group with a similar structure of estrogen that might provide a strong alternative and complementary medicine to existing chemotherapeutics drugs. Several research studies demonstrated that it can target the estrogen receptor (ER), Human epidermal growth factor receptor-2 (HER2), and Breast cancer gene-1 (BRCA-1) in multiple BC cell lines, as well as sensitize cancer cell lines to this compound when used at an optimal inhibitory concentration. Genistein effectively showed anti-cancer activities through apoptosis induction, arresting cell cycle, inhibiting angiogenesis with metastasis, reducing inflammation, mammosphere formation, tumor growth, up-regulating tumor suppressor gene, and downregulating oncogene in suppressing cancer progression in vitro and animal model study. In addition, research studies have also suggested that these phytochemicals synergistically reverse the resistance mechanism of chemotherapeutic drugs, increasing the efficacy of some chemoinformatics drugs. Our review article aims to unbox and validate the molecular pharmacology in breast tissue, cell-specific anti-cancer mechanism with synergistic activity, and possible pharmacokinetic parameters of Genistein as a potential alternative therapeutic option for the treatment of BC.

Background: Poroid neoplasms (PN) are a heterogeneous group of tumors deriving from sweat glands and folliculo-sebaceous units. Their histological classification and clinical features are challenging. Our aim was to report clinicopathological features of poroid neoplasms. Methods: it is a retrospective study including all cases of poroid neoplasms registered at our Pathology laboratory of Niamey National Hospital (from February 2020 to February 2024). Results: We registered 13 cases of benign poroid neoplasms: 10 classic poromas (CP) (76.9%), 2 poroid hidradenomas (PH) (15.4%) and 1 dermal duct tumor (DDT) (7.7%). Nine cases (69.2%) had preoperative clinical diagnosis of malignancy. The mean age was 41.1 years (range of 12 – 70 years) with a slight female predominance (sex ratio = 1.16). Only 4/13 cases (30.8%) had classical palmoplantar locations. The tumors mean size was 3.7 cm (range of 0.4 – 8 cm). All cases were well-circumscribed solid (7/13 cases, 53.8%) or solido-cystic whitish nodules (6/13 cases, 46.2%). Clear cells were present in 7 cases (53.8%), apocrine ductal differentiation (mixed or pure) in 6 cases (46.2%), keratin horns in 2 cases (15.4%), squamous eddies in 6 cases (46.2%), melanin pigments in 1 case (7.7%) and sebaceous differentiation in 2 cases (15.4%). Conclusions: Unlike what is classically reported, our study shows that apocrine ductal differentiation, younger age and non-palmoplantar locations are common in poroid neoplasms. Also, PN are often diagnosed as malignant tumors by clinicians before histopathological analysis.