Due to wood’s susceptibility to fire, it is crucial to treat wood-based materials with flame retardants, especially in construction applications. This study investigated the effectiveness of various grooving types, including transverse, longitudinal, both transverse and longitudinal, and surface grooving, in enhancing larch's vacuum pressure impregnation process. The results revealed that transverse grooving provided a slightly greater impregnation advantage than longitudinal grooving. Moreover, exceptional impregnation performance was observed in larch samples subjected to both longitudinal and transverse grooving and surface grooving, exhibiting a remarkable improvement of 214,7 % compared to untreated larch.

In accordance with regulations set forth by the Ministry of Land, Infrastructure, and Transport in Korea regarding the "Flame Retardant Performance of Building Finishing Materials and Fire Spread Prevention Structure," it is mandated that semi-noncombustible materials have a total heat emission less than 8 MJ/m². Consequently, our study aimed to determine the ideal quantity of flame-retardant treatment required to meet the fire safety standards for Korean larch and Japanese cedar, commonly used exterior materials in Korean construction. To this end, we investigated using a cone calorimeter to observe changes in the THR (Total Heat Released) based on the AFI (Amount of Flame-retardant Impregnation) in Korean larch and Japanese cedar. Our findings indicated that the AFI needed to satisfy the prescribed flame-retardant standard of 8 MJ/m² was THR 299 MJ/m² for Korean larch and THR 526 MJ/m² for Japanese cedar. As a result, we established optimal impregnation levels of flame retardant for both species.

Ground-level ozone (O3) increases in the northeastern part of Eurasia, where larch species are dominant trees and have been planted intensively. The Japanese larch (Larix kaempferi; hereafter larch) is classified as the tree species most of its sensitive to O3 based on data from long-shoot needles of seedlings. This criterion should be reconsidered based on O3 uptake, which is strongly depended on stomatal conductance (Gs) of adult trees through the difference in relevant needle traits. Because Gs is closely correlated with photosynthetic activity, we measured the in situ seasonal and yearly change in photosynthetic function, needle mass per area (LMA) and nitrogen (N) content of both short- and long-shoot needles of the canopy of larch trees over successive 3 years. No difference was observed in the in light saturated photosynthetic rate at ambient CO2 (Psat) between needles of hetero types of shoot in the latter part of the growing season, but clear differences were found within a specific year, indicating that seasonal changes in climatic factors determine Psat in the long term. The Psat-N relations differed significantly between the needle types. However, Psat at saturated CO2 (Pmax)-N was quite similar, implying that the CO2 diffusion difference between short- and long-shoots is responsible for the differing Psat -N. In conclusion, seasonal and yearly variations in photosynthetic capacity are mainly determined mainly by climatic variations, whereas shoot type determined the traits of photosynthetic N utilization as well as Gs regulation.