Version 1
: Received: 30 December 2019 / Approved: 31 December 2019 / Online: 31 December 2019 (10:22:43 CET)
How to cite:
Vincent, E.; Samuel, M. Re-desiging and Fabrication of the Contact Area of a Solar Milk Pasteurizer. Preprints2019, 2019120407. https://doi.org/10.20944/preprints201912.0407.v1
Vincent, E.; Samuel, M. Re-desiging and Fabrication of the Contact Area of a Solar Milk Pasteurizer. Preprints 2019, 2019120407. https://doi.org/10.20944/preprints201912.0407.v1
Vincent, E.; Samuel, M. Re-desiging and Fabrication of the Contact Area of a Solar Milk Pasteurizer. Preprints2019, 2019120407. https://doi.org/10.20944/preprints201912.0407.v1
APA Style
Vincent, E., & Samuel, M. (2019). Re-desiging and Fabrication of the Contact Area of a Solar Milk Pasteurizer<strong></strong>. Preprints. https://doi.org/10.20944/preprints201912.0407.v1
Chicago/Turabian Style
Vincent, E. and Moveh Samuel. 2019 "Re-desiging and Fabrication of the Contact Area of a Solar Milk Pasteurizer<strong></strong>" Preprints. https://doi.org/10.20944/preprints201912.0407.v1
Abstract
Despite the existence of pasteurization and its advocacy worldwide, most marketed milk in a developing country like Nigeria are sold raw by the locals. It costs hundreds of millions of Naira to set up a conventional pasteurizing plant in Nigeria. Boiled milk ends up curdling which results in to a loss of nutrients, so it is not beneficial to treat milk by this method. This paper hence presents the re-designing and fabrication of the contact area of a solar milk pasteurizer
Engineering, Industrial and Manufacturing Engineering
Copyright:
This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
