Preprint Article Version 1 This version is not peer-reviewed

TiC/Cr23C6 Composite Coating on 304 Stainless Steel and Its Tribological/deteriorative Properties Investigation

Version 1 : Received: 4 July 2018 / Approved: 5 July 2018 / Online: 5 July 2018 (16:30:30 CEST)

How to cite: Heidarshenas, B. TiC/Cr23C6 Composite Coating on 304 Stainless Steel and Its Tribological/deteriorative Properties Investigation. Preprints 2018, 2018070103 (doi: 10.20944/preprints201807.0103.v1). Heidarshenas, B. TiC/Cr23C6 Composite Coating on 304 Stainless Steel and Its Tribological/deteriorative Properties Investigation. Preprints 2018, 2018070103 (doi: 10.20944/preprints201807.0103.v1).

Abstract

The aim of this work is evaluation of corrosion behavior of SS 304 coated through TIG process. In this work, Ti tube cored with graphite powder was applied. Experimental processes were shown that the optimum parameters for coating procedure are voltage of 15V, current density of 120A and the speed of 2.1mm/s. Investigations on corrosion resistance of coating are shown that not only this composite coating can improve the tribological behavior of this type of stainless steel, but also there is an improvement in its deteriorative property. Moreover, it is observed that mass reduction in coating is 5 times lower than the base metal.

Subject Areas

Corrosion Resistance; TIG; Hardness; Wear Resistance; SS 304

Comments (0)

We encourage comments and feedback from a broad range of readers. See criteria for comments and our diversity statement.

Leave a public comment
Send a private comment to the author(s)
Views 0
Downloads 0
Comments 0
Metrics 0


×
Alerts
Notify me about updates to this article or when a peer-reviewed version is published.