In recent years, in addition to the commonly known wire-based processes of Directed Energy Deposition using lasers, a process variant using the electron beam has also developed to industrial market maturity. The process offers particular potential for processing highly conductive, reflective or oxidation-prone materials. However, for industrial usage there is a lack of comprehensive data on performance, process limits and possible applications. The present study deals with this problem using the example of the high-strength aluminum bronze CuAl8Ni6. Multi-stage test welds are used to determine the physically possible process limits and draw conclusions about the suitability of the parameters for additive manufacturing. For this purpose, optimal ranges for energy input, possible welding speeds and the scalability of the process were investigated. Finally, additive test specimens in the form of cylinders and walls are produced and the hardness profile, microstructure and mechanical properties are investigated. It is found that the material CuAl8Ni6 can be well processed by wire electron beam additive manufacturing. The microstructure is similar to a cast structure, the hardness profile over the height of the specimens is constant and the tensile strength and elongation at fracture values achieved correspond to the specification of the raw material.

The official recommendations to manage COVID-19 in the outpatient setting focus on high-cost drugs (remdesivir, nirmatrelvir-ritonavir, molnupiravir), suffering from many problems. Therefore, one may consider also other treatments meeting these criteria: • promising effectiveness, based on favorable randomized controlled trials (RCTs) of sufficient validity. Even without definitive evidence, physicians and informed patients can consider them if they are also: • safe, to the state of knowledge • with a very favorable opportunity cost • biologically plausible/not implausible • accessible • without major commercial sponsors in the trials promoting them, and with researchers without major conflicts of interests. The main focus is on a limited group of functional foods and some their active ingredients, with further mention of other substances of different origin, yet fully meeting all the aforementioned criteria. The functional foods and substances described and discussed certainly do not cover all the known effective therapies for COVID-19 (in one case also for Long-COVID), but the only therapies proposed in this paper currently satisfy all the above criteria. The supporting scientific evidence will favor meta-analyses of RCTs that include the most definitive outcome: all-cause mortality, i.e. the outcome that most fully informed people tend to prioritize. Furthermore, the reported evidence favors clinical studies of the most valid design, i.e. RCTs.

In this study, the potential of Fe3Al coating material as an environmentally friendly alternative to coatings containing critical elements for brake discs was investigated. A buffer layer of Cr-Mo steel (Ferro 55) was applied to enhance coating quality and prevent the formation of hot cracks during solidification. Microstructural analysis of the cross-section of the coating showed that the buffer layer diffused into the Fe3Al coating, forming a combination of Fe3Al, Fe, and Fe3AlC0.5 phases. The tribological properties of the Fe3Al coating were evaluated by pin-on-disc tests using two different copper-free friction materials extracted from commercial brake pads. The wear results showed a coefficient of friction comparable to that of an uncoated disc, but with a reduction in Particulate Matter (PM) emissions, an interesting aspect that is gaining increasing importance in view of the upcoming international standards..

Myelodysplastic syndromes (MDS) are diseases that occur when blood-producing cells in the bone marrow are damaged; such damage can affect one or more types of blood cells. Common types of MDS are refractory anemia with ring sideroblasts and refractory anemia with excess blasts (MDS-RS and MDS-EB, respectively). This work analyzed the proteomics of the medullary plasma of 10 patients with MDS-RS and MDS-EB compared to healthy control people. Overexpressed proteins that may be potential candidates for biological markers for the evaluation, study, and diagnosis of these diseases have been identified. These samples were subjected to immunodepleting, concentrated, and digested for further analysis by mass spectrometry. The ratios between selected groups and healthy people were calculated. Seven overexpressed proteins in both syndromes were identified as potential biomarker candidates: vitronectin (VTN), (2) fibrinogen (FGA), (3) pregnancy zone protein (PZP), (4) kininogen (KNG1), (5) immunoglobulin lambda chain (IGLL1), (6) complement factor C4b, and (7) hemopexin (HPX). A modified affinity chromatographic column with lectin frutalin (FTL) was used for non-depleted samples. Immunoglobulin M (IgM) was expressed in the samples from both syndromes. Surprisingly, IgM from patients with syndromes was over retained on the frutalin (FTL) column when compared with the control group. We further hypothesized that over retention of this protein by the FTL is due to the presence of α-galactosidic residues in the IgM of MDS-RS and MDS-EB patients. Differential recognition of proteins on non-depleted samples from the use of FTL appears to be a powerful tool for proteomic analysis.

This paper investigates the effects of various process parameters, specifically the substrate temperature, on weld track geometry in Directed Energy Deposition (DED) processes. A specialized experimental setup integrated within a DED machine facilitates controlled thermal conditioning of sample sheets. Through Design of Experiments (DoE) methods, individual weld marks are generated and analysed to assess geometric characteristics. Regression models are constructed to predict machine parameters for desired weld geometry at different substrate temperatures. Validation experiments confirm the accuracy and reliability of the regression models. Results show a consistent trend towards target geometric features across a broad range of substrate temperatures. Despite deviations in measured values, successful fabrication is achieved, demonstrating robust bonding between weld and substrate. Contact angle predictions exhibit precision within a partial temperature range for proper deposition. The developed model offers insights for optimizing DED process parameters to achieve desired weld characteristics, advancing the capabilities and reliability of additive manufacturing technology. Future work aims to refine the regression model and explore additional mathematical relationships for enhanced accuracy. An implication of this work is the potential to vary the local mechanical properties of parts by controlling the temperature profile while maintaining consistent geometric characteristics. By manipulating the substrate temperature, it may be possible to tailor the microstructure and mechanical properties of fabricated components in the future to meet specific requirements in different regions of the part.

This research illustrates modification of multi-walled carbon nanotubes (MWCNT) by ZrO2/Pb to construct nanocomposites (MWCNT/ZrO2/Pb-NCs) by simple precipitation technique and subsequently examine its ability for adsorption of Amido black (AB) and Eosin B (EB) dyes in binary system. The present nanocomposites investigation by FESEM, XRD, FTIR, and EDX analysis, reveal its as-synthesized crystalline nature with cubic morphology and average particle size 30–50 nm. The present nano-adsorbent represent high efficiency for AB and EB adsorption from aqueous solution, while dependency of variables including pH, initial concentration of dyes, contact time and MWCNT/ZrO2/Pb-NCs mass were analyzed by central composite design (CCD). The predicted maximum removal percentage was 95% removal for both dyes is consequence of adjustment of operational conditions at pH of 6.0; 0.05 g MWCNT/ZrO2/Pb-NCs; 15 min stirring at 15 mg L-1 for both dyes. The Langmuir as applicable for representation and description of reveal data of adsorption with adsorption capacity of 15.46 and 16.92 mg g-1 for AB and EB, respectively. Pseudo-first order model owing to its high correlation coefficient and closeness of experimental and theoretical data well represented behavior of corresponding adsorption system. Mechanism examination strongly proof high contribution of external mass transference as the main rate-controlling step. The successful regeneration of MWCNT/ZrO2/Pb-NCs suggested their usefulness in wastewater treatment and its ability of environmental management.

Dry eye disease (DED) is a multifactorial disorder in which tear fluid homeostasis is lost, resulting in increased tear film osmolarity and ocular surface irritation. In Asia, the short tear film breakup time type-DED is common, and stabilization of the tear film is the first goal of treatment. Treatment of DED begins with eye drops. Until now, artificial tears and steroid eye drops have been the main treatment for DED. However, artificial tears require frequent administration of eye drops and thus pose adherence problems, while steroids have problems with side effects (cataracts, increased intraocular pressure). This review evaluates the new generation of DED therapies in Asia based on what is known about them and demonstrates that they are more effective for DED than traditional therapies such as artificial tears and steroids. Based on these considerations, it is proposed that the optimal treatment for DED in Asia is the initial application of mucin secretion enhancing eye drops (long-acting diquafosol) and oral supplements, and if additional treatment is needed, cyclosporine eye drops and the adjunctive therapies presented in this review are added.