Preprint
Article

This version is not peer-reviewed.

Zwitterionic Anionic Mixed-Surfactant Gels for Hydraulic Fracturing: Rheology, Thermal Stability, and Proppant Transport

Submitted:

18 November 2026

Posted:

19 November 2026

You are already at the latest version

Abstract
Viscoelastic surfactant (VES) gels are attractive fracturing fluids because they break down on their own when they meet oil or formation water, leaving little residue in the fracture. Their weak points are poor heat resistance and no filter-cake control. One way around this is to blend a zwitterionic surfactant with an anionic one, so that the mixture forms stronger self-assembled structures than either surfactant alone. This paper looks at two such blends, cocamidopropyl betaine (CAPB) with sodium oleate (NaOA) and CAPB with sodium dodecyl sulfate (SDS), each combined with iso-amyl alcohol as co-surfactant, clove oil, and water. Drawing on the experimental data of Baruah et al., we compare the critical micelle concentration, phase behavior, flow curves, temperature and pressure response, viscoelastic moduli, miscibility, and proppant settling of the two systems. We also add simple checks of our own: viscosity at pumping shear computed from the power-law fits, a Stokes-law ranking of the three proppants, and unit conversions to field practice. The CAPB + NaOA blend gels at lower surfactant content and is clearly stronger. With 0.1% NaOH and 0.1% SiO2 nanoparticles at 28% co-surfactant/surfactant, it kept its viscosity at 103 °C and 100 s−1 for 120 min at 2068–6205 kPa, thinned out in water but not in diesel, and held sand, intermediate-strength, and bauxite proppants up to 100 °C.
Keywords: 
;  ;  ;  ;  ;  ;  
Copyright: This open access article is published under a Creative Commons CC BY 4.0 license, which permit the free download, distribution, and reuse, provided that the author and preprint are cited in any reuse.