Preprint
Article

This version is not peer-reviewed.

Development of a Multifunctional Organic Inhibitor Technology for Integrated Microbial Control and Corrosion Protection

Submitted:

16 November 2026

Posted:

18 November 2026

You are already at the latest version

Abstract

Corrosion control remains one of the most pressing challenges in the oil and gas industry, particularly in developing countries, and there is a growing need for multifunctional inhibitor compositions that combine corrosion protection with bactericidal activity. In this work, the effect of a new inhibitor composition, MA-1, on the corrosion rate of St3 carbon steel in formation waters containing hydrogen sulfide (H2S), carbon dioxide (CO2), and their mixture was investigated for the first time. Laboratory studies were performed by the gravimetric method using 30 × 20 × 1 mm steel specimens. In the concentration range of 10–25 mg/L, the protection efficiency of MA-1 was 87.98–98% in H2S-containing formation water, 73.32–97.03% in CO2-containing water, and 71.95–97.47% in mixed H2S + CO2 water. The bactericidal properties of the composition were also investigated. At a concentration of 20 mg/L, the bactericidal effect of MA-1 was 93% against Desulfovibrio desulfuricans and 90% against Desulfomicrobium cells; at 25 mg/L, these values were 98% and 95%, respectively. The bactericidal effect, calculated for both concentrations from the amount of biogenic hydrogen sulfide on the seventh day, was higher for D. desulfuricans than for Desulfomicrobium cells.

Keywords: 
;  ;  ;  ;  ;  ;  
Subject: 
Engineering  -   Other
Copyright: This open access article is published under a Creative Commons CC BY 4.0 license, which permit the free download, distribution, and reuse, provided that the author and preprint are cited in any reuse.