Liu, J.; Zhang, X.; He, Y.; Zhao, Z.; Xia, M.; Hu, Y. Suspended Water Droplet Confined Laser Shock Processing at Elevated Temperatures. Preprints2022, 2022040018. https://doi.org/10.20944/preprints202204.0018.v1
APA Style
Liu, J., Zhang, X., He, Y., Zhao, Z., Xia, M., & Hu, Y. (2022). Suspended Water Droplet Confined Laser Shock Processing at Elevated Temperatures. Preprints. https://doi.org/10.20944/preprints202204.0018.v1
Chicago/Turabian Style
Liu, J., Min Xia and Yaowu Hu. 2022 "Suspended Water Droplet Confined Laser Shock Processing at Elevated Temperatures" Preprints. https://doi.org/10.20944/preprints202204.0018.v1
Abstract
The temperature-assisted laser shock process has shown promising prospects in the fields of forming manufacturing and surface strengthening. However, large-scale application of this process is limited by the instability and failure of confinement medium at high temperatures (≥300 ℃). Aiming at this problem, we propose a novel laser shock strategy based on Leidenfrost effect, where the suspended droplets are utilized as the confinement medium. According to the sequence of images acquired by time delay system and high-speed camera, the droplet dynamics behavior is studied. The focusing enhancement effect of the droplet is comprehensively explored. And the correlations between droplet size, ambient temperature, vapor layer thickness and focusing effect are investigated. Combining the dynamics and focusing enhancement effect of droplets, a theoretical model of laser shock pressure under droplet confinement is established. Finally, the effectiveness and feasibility of the droplet-based laser shock strategy in high temperature processing environments are verified by typical applications in laser shock forming and laser shock peening fields. The results show that the droplet-based laser shock process presents better forming effect. And the mechanical property tests demonstrate that this process can obtain the simultaneous improvement of the strength (~51%) and ductility (~6.4%) of annealed Cu. The multiscale plasticity mechanisms of the strengthened material are comprehensively investigated. We believe that this low-energy, low-cost and high-quality process can provide a new solution for the industrial application of laser shock at high temperatures.
Keywords
Droplet; Laser shock; High temperatures; Dynamics; Focusing enhancement
Subject
Physical Sciences, Applied Physics
Copyright:
This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
