Version 1
: Received: 15 April 2021 / Approved: 16 April 2021 / Online: 16 April 2021 (16:52:42 CEST)
How to cite:
Kirshanov, K.; Gerval'd, A.; Toms, R. Express Method for Evaluating the Suitability of a Polymer or Composite of Thereof for Fused Deposition Modeling 3D Printing. Preprints2021, 2021040450 (doi: 10.20944/preprints202104.0450.v1).
Kirshanov, K.; Gerval'd, A.; Toms, R. Express Method for Evaluating the Suitability of a Polymer or Composite of Thereof for Fused Deposition Modeling 3D Printing. Preprints 2021, 2021040450 (doi: 10.20944/preprints202104.0450.v1).
Cite as:
Kirshanov, K.; Gerval'd, A.; Toms, R. Express Method for Evaluating the Suitability of a Polymer or Composite of Thereof for Fused Deposition Modeling 3D Printing. Preprints2021, 2021040450 (doi: 10.20944/preprints202104.0450.v1).
Kirshanov, K.; Gerval'd, A.; Toms, R. Express Method for Evaluating the Suitability of a Polymer or Composite of Thereof for Fused Deposition Modeling 3D Printing. Preprints 2021, 2021040450 (doi: 10.20944/preprints202104.0450.v1).
Abstract
The paper formulates requirements for a polymer material for molding products from it by fused deposition modeling. A methodology for evaluating the suitability of a polymer or composite of thereof in 3D printing technology has been developed. A graphic representation of the developed methodology in the form of a temperature-shear rate logarithm diagram is proposed. Application of the proposed methodology makes it possible to simplify the development of new materials for 3D printing by fused deposition modeling both at the stage of selecting the components of the polymer composition and at the stage of its subsequent approbation.
Copyright:
This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.