Preprint Article Version 1 Preserved in Portico This version is not peer-reviewed

Design and Development of a GSM-based Smart Home Automation System: A Low Cost Approach

Version 1 : Received: 17 November 2018 / Approved: 19 November 2018 / Online: 19 November 2018 (15:05:54 CET)

How to cite: Reza, M.S.; Mamun, S.; Monjur Mossadded, M. Design and Development of a GSM-based Smart Home Automation System: A Low Cost Approach. Preprints 2018, 2018110472. https://doi.org/10.20944/preprints201811.0472.v1 Reza, M.S.; Mamun, S.; Monjur Mossadded, M. Design and Development of a GSM-based Smart Home Automation System: A Low Cost Approach. Preprints 2018, 2018110472. https://doi.org/10.20944/preprints201811.0472.v1

Abstract

Home Security Systems are very important features of modern residential and office setups. This system is used to keep home safe from harmful gases, fire and intruders. It must be affordable, reliable and effective. In this paper, a GSM based home security system has been designed and implemented. The system consists of a GSM Module, MQ-2 smoke detector, Ultrasonic sonar sensor, LM35 temperature sensor, Arduino Uno and relay module. The MQ-2 smoke detector is used to detect harmful gases i.e. LPG, CH4, CO, Alcohol, Smoke or Propane. Any of the harmful gases stated above is detected it will warn the owner by activating the buzzer and displaying a warning message on the LCD display. It will also send a SMS to the owner. Our system can also measure temperate and if the temperature is increased above a certain range it will compensate it by activating Air Conditioner through the relay module. The system will also send a SMS to the owner. It can also detect intruders using Ultrasonic sensor and warn us through buzzer, SMS and displaying message on the LCD. Our system is reliable as it has very fast response and cost effective and it has been developed using our own technologies.

Supplementary and Associated Material

Keywords

GSM Module; Arduino; SMS; Relay;MQ-2; HC-SR04; LM35

Subject

Engineering, Control and Systems Engineering

Comments (1)

Comment 1
Received: 5 January 2019
Commenter: (Click to see Publons profile: )
The commenter has declared there is no conflict of interests.
Comment: It is a good project. But, you dot explain what will happen if Temperature still alternate up and down 45 is the GSM module will continue sending messages or it will stop.

Also, there must be an alarm when the charge (money) of SIM go under a threshold.

project you be update, so when the GSM module sends Temperature message it wait for a message that tell it to switch on air conditioning or what else
+ Respond to this comment

We encourage comments and feedback from a broad range of readers. See criteria for comments and our Diversity statement.

Leave a public comment
Send a private comment to the author(s)
* All users must log in before leaving a comment
Views 0
Downloads 0
Comments 1
Metrics 0


×
Alerts
Notify me about updates to this article or when a peer-reviewed version is published.
We use cookies on our website to ensure you get the best experience.
Read more about our cookies here.