You are currently viewing a beta version of our website. If you spot anything unusual, kindly let us know.
Preprint
Communication
Conformal Coating by Liquid Route on Three-Dimensional Topology
Altmetrics
Downloads
423
Views
292
Comments
0
This version is not peer-reviewed
Abstract
We demonstrated a new approach to the production of three-dimensional-coated patterns using liquid route. Metallic perovskite oxides were coated onto three-dimensional (3D) microstructured substrates with different aspect ratios. The success of the method relies on the solution viscosity monitored by adding viscous liquid. The process of oxide thin films consists in three steps: preparing the precursor solution, coating the solution by spin-coating process onto three-dimensional-Si substrates and post-annealing. The chemical solution 3D-coating is conformal.
Keywords:
Subject: Chemistry and Materials Science - Chemical Engineering
Copyright: This open access article is published under a Creative Commons CC BY 4.0 license, which permit the free download, distribution, and reuse, provided that the author and preprint are cited in any reuse.
Submitted:
04 September 2018
Posted:
04 September 2018
You are already at the latest version
Alerts
This version is not peer-reviewed
Submitted:
04 September 2018
Posted:
04 September 2018
You are already at the latest version
Alerts
Abstract
We demonstrated a new approach to the production of three-dimensional-coated patterns using liquid route. Metallic perovskite oxides were coated onto three-dimensional (3D) microstructured substrates with different aspect ratios. The success of the method relies on the solution viscosity monitored by adding viscous liquid. The process of oxide thin films consists in three steps: preparing the precursor solution, coating the solution by spin-coating process onto three-dimensional-Si substrates and post-annealing. The chemical solution 3D-coating is conformal.
Keywords:
Subject: Chemistry and Materials Science - Chemical Engineering
Copyright: This open access article is published under a Creative Commons CC BY 4.0 license, which permit the free download, distribution, and reuse, provided that the author and preprint are cited in any reuse.
Laser Additive Manufacturing of Si/ZrO2 Tunable Crystalline Phase 3D Nanostructures
Greta Merkininkaite
et al.
,
2020
Additive-Manufacturing of 3D Glass-Ceramics down to Nanoscale Resolution
Darius Gailevicius
et al.
,
2018
MDPI Initiatives
Important Links
© 2024 MDPI (Basel, Switzerland) unless otherwise stated