In order to reduce the risk of grid transient voltage instability brought about by the new energy and system dynamic loads and the increasing proportion of new energy access, this paper proposes a differentiated dynamic reactive power compensation configuration method for suppressing transient voltage dip instability. The method first establishes a dynamic reactive power device configuration index system based on a multi-binary table, and then establishes a differentiated dynamic reactive power compensation device configuration model based on the node instability risk characteristics by combining with the regional division of system transient voltage instability risk. The model takes the investment cost and suppression effect as the optimization objectives, and realizes differentiated dynamic reactive power compensation by flexibly adjusting the optimization weights of economic benefits and reactive power compensation effects in the configuration process; Compared with the traditional compensation methods, differentiated compensation can significantly improve the economic benefits of reactive power compensation configuration. Finally, taking the IEEE39 node test system as an example, the improved TLBO algorithm is used to solve the model, which verifies the accuracy and effectiveness of the method proposed in this paper.

In the process of use and manufacture, carbon fiber foam sandwich structures were often damaged by low-energy impact, resulting in performance degradation. Therefore, it was necessary to study the damage caused by low-speed impact of composite sandwich structures. In this paper, based on Hashin failure criterion, an equivalent finite element model of carbon fiber foam sandwich panel under low velocity impact was established. The model was used to simulate the damage of foam sandwich panel with [±45°/±45°/ (core) /±45°/±45°] ply structure under the impact energy of 10.58J, 21.17J, 31.75J and 42.34J. The simulation results of impact damage depth were compared with the experimental results. The error was less than 10%, which proved the rationality of the impact equivalent model. The model was used to predict and analyze the damage of foam sandwich panels with [±45°/ (core) /±45°], [±45°/ (0°, 90°) / (core) /±45°] and [±45°/ (0°, 90°) (core) / (0°, 90°) /±45°] ply structures under 21.17J impact energy. By comparing and analyzing the damage situation, impact force response time and impact velocity response time, the low energy impact resistance was analyzed. The results showed that increasing the number of ply structure of [±45°] can reduce the impact damage degree and improve the bearing capacity of sandwich panels.

This paper investigates the reconfigurable intelligent surface (RIS)-aided uplink multicell massive multiple-input multiple-output (mMIMO) communication system with transceiver hardware impairments (THWIs), and the practical and feasible two-timescale scheme is used to design the phase shifts of RIS. We consider the Rician channel model and use maximal-ratio combining (MRC) technology to process the received signal at BS. The expression of the uplink achievable rate is derived and analyzed. Besides, genetic algorithm (GA) is used to optimize the phase shifts of RIS to maximize the data rate. Finally, the accuracy of the derived results is verified. The simulation results show that appropriately increasing the number of RIS’s reflecting elements can compensate for the performance loss caused by inter-cell interference and THWIs, and reduce the demand for the number of BS antennas, which can significantly reduce the hardware costs at the BS.

In recent years, drones have been used in a wide range of fields such as agriculture, transportation of goods, and security. Drones equipped with communication facilities are expected to play an active role as base stations in areas where ground base stations are unavailable, such as disaster areas. In addition, asynchronous operation is being considered for local 5G in order to support all kinds of use cases. In asynchronous operation, cross-link interference between base stations is an issue. This paper attempts to reduce the interference caused by the drone network by introducing circularly polarized antennas. Numerical analyses are conducted to validate the effectiveness of the proposed system, where SIRs (Signal-to-Interference Ratio) are shown to be improved significantly as the numerical evaluation results.

Structural deformations are one of the most significant factor that affects machine tool (MT) positioning accuracy. These induced errors are complex to be represented by a model, nevertheless they need to be evaluated and predicted in order to increase the machining performance. This paper presents a novel approach to calibrate a machine tool in real-time, analyzing the thermo-mechanical errors through Fibre Bragg Grating (FBG) sensors embedded in the MT frame. The proposed configuration consists of an adaptronic structure of passive materials, Carbon Fibre Reinforced Polymers (CFRP), equipped by FBG sensors that are able to measure in real-time the deformed conditions of the frame. By using a proper thermo-mechanical kinematic model, the displacement of the end effector may be predicted and corrected when it is subjected to external undesired factors. By starting from a set of FE simulations to develop a model able to describe the MT structure stresses, a prototype has been fabricated and tested. The scope was to compare the numerical model with the experimental tests using FBG sensors. The experimental campaign has been performed varying the structure temperature over time and measuring the tool tip point (TTP) positions. The obtained results showed a substantial matching between the real and the predicted position of TTP confirming the effectiveness of the proposed calibration system.

The amount and spatial distribution of foliage in a tree canopy have fundamental functions in ecosystems as they affect energy and mass fluxes through photosynthesis and transpiration. They are usually described by the Leaf Area Index (LAI) and the Leaf Area Density (LAD), which can be measured through a variety of methods, including voxel-based methods applied to LiDAR point clouds. A theoretical study recently compared the numerical errors arising from different voxel-based estimation methods for Plant Area Density (PAD) based on Beer’s law-based, contact frequency and Maximum-Likelihood Estimation, showing that the bias-corrected Maximum Likelihood Estimator was theoretically the most efficient. However, this earlier study i) ignored wood volumes; ii) neglected vegetation clumping inside the voxel; iii) ignored instrument characteristics in terms of effective footprint, iv) was limited to a single viewpoint. In practice, retrieving LAD from PAD is not straightforward, vegetation is not randomly distributed in volumes of interest, beams are divergent and forestry plots are usually sampled from more than one viewpoint, to mitigate the effect of occlusion. In the present short communication, we extend the previous efficient formulation to actual field conditions to i) account for the presence of both wood volumes and wood hits, ii) rigorously include correction terms for vegetation and instrument characteristics, iii) integrate multiview data. A numerical comparison with other methods commonly used to combine information from different viewpoints led to error reduction, especially in poorly-explored volumes, which are frequent in actual canopies. Beyond its concision, completeness and efficiency, this new formulation -which can be applied to multiview TLS, but also UAV LiDAR scanning - can help reducing errors in LAD estimation.

With a large number of annotated non-coding RNAs (ncRNAs), repetitive sequences are found to constitute functional components (termed as repetitive elements) in ncRNAs that perform specific biological functions. Bioinformatics analysis is a powerful tool for improving our understanding of the role of repetitive elements in ncRNAs. This chapter summarizes recent findings that reveal the role of repetitive elements in ncRNAs. Furthermore, relevant bioinformatics approaches are systematically reviewed, which promises to provide valuable resources for studying the functional impact of repetitive elements on ncRNAs.

In this paper we introduce the New/Generalized two parameter Gamma function and Pochhammer symbol. We named them, as Generalized p - k Gamma Function and Generalized p - k Pochhammer symbol and denoted as $ _{p}^{a}\Gamma_{k}(x) $ and $ _{p}^{a}(x)_{n,k} $ respectively. We prove the several identities for $ _{p}^{a}\Gamma_{k}(x) $ and $ _{p}^{a}(x)_{n,k} $ those satisfied by the classical Gamma function. Also we provide the integral representation for the $ _{p}^{a}\Gamma_{k}(x) $

We introduce linear probing hashing schemes that construct a hash table of size $n$, with constant load factor $\alpha$, on which the worst-case unsuccessful search time is asymptotically almost surely $O(\log \log n)$. The schemes employ two linear probe sequences to find empty cells for the keys. Matching lower bounds on the maximum cluster size produced by any algorithm that uses two linear probe sequences are obtained as well.

This paper reviews the unilateral and bilateral, one- and two-dimensional Laplace transforms. The unilateral and bilateral Laplace transforms are compared in the one-dimensional case, leading to the formulation of the initial-condition theorem. This problem is solved with all generality in the one- and two-dimensional cases with the bilateral Laplace transform. General two-dimensional linear systems are introduced and the corresponding transfer function defined.

From experimental studies of protein folding, it is now clear that there are two types of folding behavior, i.e., two-state folding and non-two-state folding, and understanding the relationships between these apparently different folding behaviors is essential for fully elucidating the molecular mechanisms of protein folding. This article describes how the presence of the two types of folding behavior has been confirmed experimentally, and discusses the relationships between the two-state and the non-two-state folding reactions, on the basis of available data on the correlations of the folding rate constant with various structure-based properties, which are determined primarily by the backbone topology of proteins. Finally, a two-stage hierarchical model is proposed as a general mechanism of protein folding. In this model, protein folding occurs in a hierarchical manner, reflecting the hierarchy of the native three-dimensional structure, as embodied in the case of non-two-state folding with an accumulation of the molten globule state as a folding intermediate. The two-state folding is thus merely a simplified version of the hierarchical folding caused either by an alteration in the rate-limiting step of folding or by destabilization of the intermediate.

In order to examine the impact of geometric configuration of the human vocal tract on the redistribution of acoustic energy in the frequency spectrum, it is necessary to assemble computation models, which facilitate simple modification of the model’s geometric characteristics. This article describes how the human vocal tract model was constructed using so-called super-elements using the improved reduced system method. The mentioned procedure allows using such a model for demanding optimization calculations, for which the model is modified on the super-element level. Furthermore, the article presents an alternative approach, in which an isoparametric element of a higher degree polynomial was derived. Both approaches were compared and used to find the geometric configuration of the human vocal tract amplifying acoustic energy values on the frequency spectrum to around 3kHz.

In two dimensional disordered lattices, presence of interaction makes particles less localized than the non-interacting ones within the range of disorder strength W ≤ 4 and interaction strength V ≤ 4. If the interaction strength is higher, then particles localize more. Although, a localization-delocalization transition is not found, a transition with changes in the dominant correlations is observed. The nature of correlations between the particles as nearest neighbors become dominant beyond certain disorder strengths.

Background: Physical activity has been considered as a promising approach to slow down the disease process in Multiple Sclerosis (MS) patients. While the functional impairments of MS have been studied in detail, but there is limited evidence of the efficacy of exercise interventions on the Multiple Sclerosis functional composite (MSFC) score in these patients. The study aim was to in-vestigate the improvement in MSFC score by multi-function swing suspension training (MFSST) in the women with MS. Methods: The patients were divided into the intervention and control groups. A total of 47 MS patients completed the MSFC components at baseline and after the intervention. Z scores were created for each test based on control means. Results: The MSFC components showed a significant increment in comparison with the baseline levels in the four, six, and eight weeks following the first exercise session (all p<0.05). These dif-ferences in the control group were not significant. The improvement in the MSFC score and the component Z-scores in the intervention groups was found from the fourth week onwards. Conclusions: The study findings highlight that MFSST can be used as an effective treatment method in MS patients due to its positive effects on physical parameters, such as muscles strength, functional impairments, and cognitive problems.

In the paper we present a new test for comparison of the means of multivariate samples with unknown distributions. The test is based on the comparison of the distributions of the distances between the samples’ elements and their means using univariate two-sample Kolmogorov-Smirnov test. The activity of the suggested method is illustrated by numerical analysis of the real-world and simulated data.

Urgent environmental challenges and emerging additive manufacturing (AM) technologies push research towards more performant and new materials. In the field of metallurgy, high entropy alloys (HEAs) have recently represented a topic of intense research because of their promising properties, such as high temperature strength and stability. Moreover, this class of multi-principal element alloys (MPEAs) have opened up researcher community to unexplored compositional spaces, making prosper literature of high-throughput methodologies and tools for rapidly screening large number of alloys. However, none of the methods has been aimed to design new MPEAs for AM process known as selective laser melting (SLM) so far. Here we conducted nanoindentation testing on single scan tracks of elemental powder blends and pre-alloyed powders after ball milling of AlTiCuNb and AlTiVNb. Results show that nanoindentation can represent an effective technique to gain information about phase evolution during laser scanning, contributing to accelerate the development of new MPEAs.

Transport of carbon, major and trace element by rivers in permafrost-affected regions is one of the key factor of circumpolar aquatic ecosystem response to climate warming and permafrost thaw. While seasonal and annual export fluxes (yields) of carbon (C) and inorganic solutes are fairly well known for all large Arctic rivers, spatial variations in elementary concentration along the river length and among its tributaries remain poorly understood. Moreover, the landscape factors controlling riverine element concentration in permafrost-affected regions are still poorly constrained. This is especially true for the largest river of Eastern Siberia, the Lena River, which drains through continuous permafrost zones with highly variable lithology and vegetation. Here we present the results of C, major and trace element measurements over a 2600-km transect of the Lena River main stem (upper and middle reaches) including its 30 tributaries, conducted at the peak of the spring flood. There were two main group of solutes in the main stem depending on their spatial pattern: i) elements that decreased their concentrations downstream, from SW to NE (Cl, SO4, DIC, Li, B, Na, Mg, K, Ca, As, Sr, Mo, Sb, Ba and U), which probably reflected a decrease in the proportion of carbonate rocks in the watershed and the degree of groundwater feeding, and ii) elements that increased their concentrations downstream (Al, Ti, Cr, Fe, Ga, Rb, Y, Zr, Nb, Cs, REEs, Hf and Th), which was tentatively linked to an increase in organic C stock in soils, larch forest coverage and enhanced mobilization of lithogenic elements from silicate soil minerals. Based on landscape parameters of Lena tributaries, we tested the impact of major environmental factors on major and trace element spatial pattern. Among all the variables, the proportion of sporadic permafrost on the watershed strongly controlled concentrations of soluble highly mobile elements (Cl, B, DIC, Li, Na, K, Mg, Ca, Sr, Mo, As and U). Another important factor of element concentration control in the Lena River tributaries was the coverage of watershed by light (B, Cl, Na, K, U) and deciduous (Fe, Ni, Zn, Ge, Rb, Zr, La, Th) needle-leaf forest (pine and larch). The latter, however, could also reflect the DOC-enhanced transport of low-soluble trace elements in the NW part of the basin. This part of the basin is dominated by silicate rocks and continuous permafrost, as compared to carbonate rock-dominated and groundwater-affected SW part of the Lena River basin. Overall, the impact of rock lithology and permafrost on major and trace solutes of the Lena River basin during the peak of spring flood was mostly detected at the scale of the main stem. Such an impact for tributaries was much less pronounced, because of the dominance of surface flow and lower hydrological connectivity with deep groundwater in the latter. Future changes in the river water chemistry linked to climate warming and permafrost thaw at the scale of the whole river basin are likely to be linked to changes in spatial pattern of dominant vegetation, rather than to the permafrost regime. We argue that comparable studies of large, permafrost-impacted rivers during most contrasting seasons, including winter baseflow, should allow efficient prediction of future changes in riverine ‘inorganic’ hydrochemistry induced by permafrost thaw.

Two-dimensional (2D) ice I is an atomic-level ice that is composed of two interlocked atom-ic layers saturated with hydrogen bonds. It has recently been experimentally observed but its properties have yet to be clarified. Accordingly, we theoretically studied the hydrophobic properties of 2D ice I. On the contrary, simulation of a hydrogen fluoride molecule on a 2D ice surface manifested that it destroyed the 2d ice structure and connected new hydrogen bonds with water molecules. Investigations of the interfacial effect between 2D and three-dimensional (3D) ice films indicated that the network structure of 2D ice was not de-stroyed by a 3D ice surface, as the former was saturated with hydrogen bonds. However, the surface of 3D ice reorganized to form as many hydrogen bonds as possible. Thus, the 2D ice film was hydrophobic and inhibited the growth of 3D ice. This shows that if 2D ice can be produced on an industrial scale, it could be used as an anti-3D-icing agent under low tem-perature.

Purpose: The accuracy of conventional visual function tests, which emit visible light, decreases in patients with corneal scars, cataracts, and vitreous hemorrhages. In contrast, infrared (IR) light exhibits greater tissue penetrance than visible light and is less susceptible to optical opacities. We therefore compared visual function results obtained using conventional visual function tests and infrared 2-photon microperimetry (2PM-IR) in a subject with a brunescent nuclear sclerotic and posterior subcapsular cataract before and after cataract surgery. Methods: Visual function testing using the cone contrast threshold (CCT) test, conventional microperimetry (cMP), visible light microperimetry from a novel device (2PM-Vis), and 2PM-IR were performed before and after cataract surgery. Results: Cone contrast threshold testing improved for the S-cone, M-cone, and L-cone by 111, 14, and 30. Retinal sensitivity assessed using cMP, 2PM-Vis, and 2PM-IR improved by 18 dB, 17.4 dB, and 3.4 dB, respectively. Conclusions and Importance: 2PM-IR, unlike conventional visual function tests, showed minimal variability in retinal sensitivity before and after surgery. Thus, IR visual stimulation introduces a paradigm shift for measuring visual function in the retina and posterior visual pathways by circumventing optical media opacities.

Multiple sclerosis (MS) and necrotizing periodontitis (NP) are two diseases whose aetiology and pathophysiology do not seem to have a common link; however, the treatment of MS with monoclonal antibodies and the decrease in humoral immunity that this entails can be a trigger or an aggravation in patients who present NP. We present a clinical case of NP in which its clinical manifestations, treatment and evolution during therapy with ocrelizumab are reflected. During the evolution of the case, a rapid progression of NP was evidenced. During her evolution, the patient suffered bilateral pneumonia due to COVID requiring treatment with corticosteroids and antibiotics, which led to clinical relief of her NP. Given this important clinical finding, we consider of great interest the regulated dental monitoring of those patients with MS before, during and after the administration of monoclonal antibodies to prevent periodontal deterioration.

Yeast two-hybrid approaches, which are based on fusion proteins that must co-localise to the nucleus to reconstitute the transcriptional activity of GAL4 have greatly contributed to understand the nitrogen interaction network of cyanobacteria, whose main hubs are the trimeric PII and the monomeric PipX regulators. The bacterial two-hybrid system, based on the reconstitution in the E. coli cytoplasm of the adenylate cyclase of Bordetella pertussis, should provide a relatively faster and presumably more physiological assay for cyanobacterial proteins than the yeast system. Here we use the bacterial two-hybrid system to gain additional insights into the cyanobacterial PipX interaction network while simultaneously assessing the advantages and limitations of the two most popular two-hybrid systems. Comprehensive mutational analysis of PipX and bacterial two-hybrid assays were performed to compare outcomes between yeast and bacterial systems. We detected interactions previously recorded in the yeast two-hybrid system as negative as well as a “false positive”, the self-interaction of PipX, which is rather an indirect interaction dependent on PII homologs from the E. coli host, a result confirmed by Western analysis with relevant PipX variants. This is, to our knowledge, the first report of the molecular basis of a false positive in the bacterial two-hybrid system.

To explore more effective and safer mobilization strategies for multiple myeloma (MM) patients, we conducted a prospective trial comparing single-dose etoposide (375 mg/m2 for one day) plus G-CSF versus G-CSF alone followed by risk-adapted plerixafor. After randomization, 27 patients in the etoposide group and 29 patients in the G-CSF alone group received mobilization regimens. Six (22.2%) patients in the etoposide group and 15 (51.7%) patients in the G-CSF alone group received a risk-adapted plerixafor based on a peripheral blood CD34+ cell count of less than 15/mm3 (P = 0.045). The median total count of CD34+ stem cells collected was significantly higher in the etoposide group (9.5 × 106/kg vs. 7.9 × 106/kg; P = 0.018), but the optimal collection (CD34+ cell count ≥ 6 × 106/kg) rates were not significantly different between the etoposide group and the G-CSF alone groups (96.3% vs. 82.8%; P = 0.195). The rate of collected CD34+ stem cells of 8.0 × 106/kg or grater was significantly higher in the etoposide group (77.8% vs 44.8%; P = 0.025). Meanwhile, the rates of adverse events of were relatively low, with no neutropenic fever or septic shock observed in either group. After transplantation, the median days to neutrophil and platelet engraftment were not significantly different between the two groups (P =1.000 in both). Thus, both single-dose etoposide plus G-CSF and G-CSF alone with risk-adapted plerixafor were effective and safe, but the former may be the better option for patients who are expected to receive two or more transplantations.

Background: Neurosarcoidosis is a great mimic, and its distinction from multiple sclerosis and other disorders can be particularly troublesome. We investigated whether cerebrospinal fluid (CSF) examination could help distinguish these two conditions and propose new diagnostic criteria. Methods: Stringent hierarchical diagnostic criteria were formulated. These were then applied prospectively to 531 neurological patients in whom neurosarcoidosis entered the differential diagnosis. The CSF total protein (TP), white cell count (WCC) and angiotensin-converting enzyme (ACE) levels were measured. The CSF and serum IgG patterns after isoelectric focusing were compared. Not all CSF parameters were measured in every patient. Results: 85/531 (16%) cases examined were diagnosed with neurosarcoidosis. Only 22 of these 85 (26%) met stringent diagnostic criteria. Intrathecal synthesis of oligoclonal IgG was evident in only 1/19 (5%) who fulfilled these criteria compared to 19/59 (32%) cases who did not (p = 0.03). CSF TP levels > 1g/L were more common in patients meeting the stringent criteria compared to the remainder of the patients, i.e. 11/22 (50%) vs 14/58 (24%) (p<0.05). Eleven out of 20 cases (55%) fulfilling stringent criteria had elevated CSF WCCs, and 6/12 cases (50%) had raised CSF ACE, neither significantly different from the remaining cases. Mean CSF TP, WCC, and ACE levels did not differ significantly between any groups of patients. Interpretation: Large elevations in CSF total protein, white cell count, and ACE occur in neurosarcoidosis but are rare in multiple sclerosis. However, the diagnostic use of these tests is limited since minimal changes may occur in both conditions. In contrast, intrathecal synthesis of oligoclonal IgG is a powerful discriminator because it is very uncommon in neurosarcoidosis whilst occurring in 95-98% of cases of multiple sclerosis. This observation implies that the immunopathogenesis of the two disorders is quite different. We suggest caution in diagnosing neurosarcoidosis when intrathecal oligoclonal IgG synthesis is detected. We propose new diagnostic criteria for neurosarcoidosis for future research.

This work presents a linear smoothing scheme over high-order triangular elements in the framework of a cell-based strain smoothed finite element method for two-dimensional nonlinear problems. The main idea behind the proposed linear smoothing scheme for strain-smoothed finite element method (S-FEM) is no subdivision of finite element cells to sub-cells while the classical S-FEM needs sub-cells. Since the linear smoothing function is employed, S-FEM is able to use quadratic triangular or quadrilateral elements. The modified smoothed matrix obtained node-wise is evaluated. In the same manner with the computation of the strain-displacement matrix, the smoothed stiffness matrix and deformation graident are obtained over smoothing domains. A series of benchmark tests are investigated to demonstrate validity and stability of the proposed scheme. The validity and accuracy are confirmed by comparing the obtained numerical results with the standard FEM using 2nd-order triangular element and the exact solutions.

Liquid crystal elastomers (LCEs) are shape morphing materials whose large and reversible shape transformation results from the coupling between the mobile anisotropic properties of liquid crystal (LC) units and the rubber elastic of polymer networks. Their shape changing behaviors under the stimuli are largely directed by LC orientations, and therefore various strategies have been developed to spatially modulate the LC alignments. But most of the methods suffer from complex fabrication technologies or intrinsic limitations in applicability. To address this issue, programmable complex shape changes in some types of LCEs, such as polysiloxane side-chain LCEs or thiol-acrylate main-chain LCEs, etc, have been achieved by using a mechanical alignment programming process coupled with two-step crosslinking. Here, we report a polysiloxane main-chain LCE with programmable 2D and 3D shape changing performances achieved by mechanically programming the polydomain LCE between the two crosslinking steps. The resulting LCEs exhibited reversible thermal induced shape transformation between the initial and programmed shapes due to the two-way memory between the first network structure and the second network structure. Our work would be potential for expanding the applications of LCE materials in actuators, soft robotics and smart structures where arbitrary and easily programmed shape morphings are needed.

Banana (Musa spp.) is an important crop to the economies of many developing countries. In the north of Argentina, a sub-tropical region, banana plants grow in a suboptimal environment that limits yield because only one harvest per year is achieved. The objective of this work was to characterize the agroecological aptitude of Formosa, Argentina, for banana production, through the behavior of three varieties of international use: Willians, Jafa and Gran Enano, evaluated during five consecutive campaigns. The three-way data analysis technique called Multiple Factor Analysis (MFA) was used for evaluating varieties’ performances across cycles of production. The results allowed inferring the existence of genotype x environment (GEI) interaction, corroborated by two-way factorial ANOVA. In order to determine how this suboptimal environment affects the development of each genotype of this perennial crop, Dual Multiple Factor Analysis (DMFA) was applied to jointly analyze the correlation structure among traits contributing to the performance of each variety at each campaign. The correlation structures between variables were different in each population and varied among campaigns. All traits showed a great variation across years and genotypes, the fruit peel thickness being the most discrepant throughout the campaigns. However, Formosa appeared as a promising subtropical agroecological environment to produce banana because varieties’ performances were acceptable for large scale production systems. In addition to evaluating the adequate aptitude for cultivating banana in Formosa considering the significant effect of GEI, this research makes a methodological contribution by proposing the use of three-way data analysis MFA and DMFA in Agronomy Science.

There exists a great potential for application in soil mechanics with the use of mechanistic models such as the finite element model, and other non-local models, such as the peridynamic model, since the soil mass can be modelled as a group of particles that interact with each other. In this work, we determine the bearing capacity of deep foundations where stresses are transmitted to deep deposits, which generally present better characteristics in terms of compressibility and shear strength. One of the main elements are driven piles, which must be previously designed, made and tested before their final use. In this work, a comparison with different methods is presented. The finite element method and the peridynamic model are used. Because the effect of consolidation was not taken into account, in these examples, the assumption is made that the structures are cemented in inert soil. Likewise, it is assumed that the water table has no influence on the simulations. Failure envelopes were observed where bonds between particles present high gradients of deformation and fracture. Bearing capacities were estimated and compared with those obtained from the Terzaghi and Meyerhof methods.

Modifiable THz spectral shapes are important tools that facilitate the comprehensive study of phonon dynamics in condensed matter systems. The generation of narrow bandwidth THz spectra with tunable center frequency which are suitable THz forms needed to achieve such objectives are currently less studied from the table top laser-induced plasma emitters’ perspective. This experimental research is aimed at developing a robust two-color laser induced plasma set-up comprising of a temporal pulse stretcher and an Optical Parametric Amplifier that generates chirped and wavelength tunable pulses respectively. By focusing and independently controlling the ω and 2ω arms of the chirped pulses resulting after the interaction with a β-BBO crystal, I aim to generate narrow bandwidth THz signal (from plasma) scalable at MV/cm intensity and tunable in a wide THz spectral range, in addition to varying the frequency ratio mix.

In this short communication, we conducted first-principles calculations to explore the stability of boron monochalcogenides (BX, X=S, Se or Te), as a new class of two-dimensional (2D) materials. We predicted BX monolayers with two different atomic stacking sequences of ABBA and ABBC, referred in this work to 2H and 1T, respectively. Analysis of phonon dispersions confirm the dynamical stability of BX nanosheets with the both 2H and 1T atomic lattices. Ab-initio molecular dynamics simulations reveal the outstanding thermal stability of all predicted monolayers at high temperatures over 1500 K. BX structures were found to exhibit high elastic modulus and tensile strengths. It was found that BS and BTe nanosheets can show high stretchability, comparable to that of the graphene. It was found that all predicted monolayers exhibit semiconducting electronic character, in which 2H structures present lower band-gaps as compared with 1T lattices. The band-gap values were found to decrease from BS to BTe. According to the HSE06 results, 1T-BS and 2H-BTe show respectively, the maximum (4.0 eV) and minimum (2.06 eV) electronic band-gaps. This investigation introduces boron monochalcogenides as a novel class of 2D semiconductors with remarkable thermal, dynamical and mechanical stability.

Euler sums are alternating (or level two) extension of multiple zeta values (MZVs). Kaneko and Tsumura initiated the study of multiple T-values (MTVs), another level two generalization, by restricting the summation indices in the definition of MZVs to a fixed parity pattern. In this paper, we shall study finite MTVs and their alternating versions which are level two and level four variations of finite MZVs, respectively. We conjecture that all finite MZVs are in the Q-span of finite MTVs which in turn apparently lie in the span of finite Euler sums, and the inclusions are both proper. We shall first provide some structural results for Euler sums of small weights, guided by the author's previous conjecture that the finite Euler sum space of weight w is isomorphic to a quotient Euler sum space of weight w. Then, by utilizing some well-known properties of the classical alternating MTVs, we shall derive a few important Q-linear relations among the finite alternating MTVs, including the reversal, linear shuffle and sum relations. We then compute the upper bound for the dimension of the Q-span of weight w finite (alternating) MTVs for w<9, both rigorously using the newly discovered relations and numerically aided by computers.

This paper introduces an innovative approach to numerically model Structure-Soil-Structure Interaction (SSSI) by integrating the Boundary Element Method (BEM) and the Finite Element Method (FEM) in a coupled manner. To assess the accuracy of the proposed method, a comparative study is undertaken, comparing its outcomes with those generated by the conventional FEM technique. Alongside accuracy, the computational efficiency aspect is crucial for the analysis of large-scale SSSI problems. Hence, the computational performance of the coupled BEM-FEM method undergoes a thorough examination and is compared with that of the standalone FEM method. The results from these comparisons illustrate the superior capabilities of the proposed method in comparison to the FEM method. The novel approach provides more reliable results compared to traditional FEM methods, serving as a valuable tool for engineers and researchers involved in structural analysis and design.

In this study novel recommendations are presented and substantiated for selecting the number of modes and optical thicknesses of flat lattice slabs that make up the microreliefs, which minimize the computational complexity of the rigorous coupled-wave analysis calculation of the diffraction efficiency (DE) of a sawtooth two-layer two-relief microstructure, while maintaining the specified reliability of the calculation results. The computational complexity can be controlled by allowing one or another level of oscillation of the DE curves depend on the angle of incidence of the radiation incident on the microstructure. In particular, the complexity of the multi-thousand DE calculations in the optimization process can be reduced by using the proposed methodology as well as increased computational complexity to certify the accuracy of the solution obtained as a result of implemented optimization.

Fexuprazan is a potassium-competitive acid blocker approved for treating gastric acid-related diseases. Herein, we evaluated the pharmacokinetics (PKs) of single-dose and multiple-dose oral administration of fexuprazan 10 mg tablets in healthy subjects (Part 1) and investigated the bioequivalence between fexuprazan 10 mg and 40 mg tablets (Part 2). Part 1 comprised a single- and multiple-dose, 1-sequence, and 2-period design, and Part 2 comprised a single-dose, 2×2 crossover design. Eight and 23 subjects completed Parts 1 and 2, respectively. In Part 1, multiple doses accumulated twice as much as single doses. In Part 2, the geometric mean ratios [90% confidence intervals] for maximum plasma concentration (Cmax) and area under the concentration–time curve from zero to the time of the last quantifiable concentration (AUClast) of four fexuprazan 10 mg tablets to those of one fexuprazan 40 mg tablet were 1.0290 (0.9352–1.1321) and 1.0290 (0.9476–1.1174), respectively, which met bioequivalence criteria. Overall, favorable PK was observed after single and multiple administrations of one fexuprazan 10 mg tablet, and four fexuprazan 10 mg tablets were pharmacokinetically equivalent to one fexuprazan 40 mg tablet.

In this paper, bikeshare data in Chicago on weather-friendly days in 2019 and 2020 were analyzed to investigate the variation in bikeshare travel before and during the pandemic. Our results show that bikeshare trips during the pandemic were much longer than prior to the pandemic. The increased rate of bikeshare usage was unbalanced spatially and varied significantly for different user types. Specifically, bikeshare was used significantly more by casual users than by subscribers, and the increase occurred much more in the outskirts of the city. The increase in bikeshare travel was associated with a reduction in travel by ride-hailing and public transit, especially in the urban periphery. The correlation of bikeshare use with the bus system was much less significant than with the rail system. Bike lanes/facilities had a mixed effect on bikeshare travel. Weekend bike trips increased in areas where there was no bike lane. Weekday trips, on the contrary, increased in the vicinity of bike greenways.

Multiple Sclerosis (MS) is a progressive neurodegenerative disease that affects more than 2 million people worldwide. Increasing knowledge about MS in different populations has advanced our understanding of disease epidemiology and variation in the natural history of MS among White and minority populations. In addition to differences in incidence, African American (AA) and Hispanic patients have greater disease burden and disability in earlier stages of disease compared to White patients. To further characterize MS in AA and Hispanic populations, we conducted a retrospective chart analysis of 112 patients treated at an MS center in Houston, Texas. Here, we describe differences in clinical presentation, MRI findings, treatment regimens, disability progression, and relapse rate. We found that patients who were evaluated by a neurologist at symptom onset had significantly decreased odds of greater disability [defined as Expanded Disability Status Scale (EDSS) &gt; 4.5] at last presentation compared to patients who were not evaluated by a neurologist (OR: 0.04, 95% CI: 0.16-0.9). We also found that active smokers had significantly increased odds of greater disability both at diagnosis and at last clinical encounter compared to nonsmokers (OR: 2.44, 95% CI: 1.10-7.10, OR= 2.44, 95% CI: 1.35-6.12, p= 0.01, respectively). Assessment of the degree of brain atrophy and progression over time along with enumeration of T1, T2, and gadolinium-enhancing brain lesions did not reveal differences across groups.

While there are many models of epidemic evolution perhaps the basis for such models finds itself in the lumped behavior expressed through the so-called SIR model (Susceptible, Infectious, Recovered) from which spring many related models. This paper discusses multiple analytic solutions to that equation including those that are available in closed analytic form and those for which at least one final integral has to be done numerically, so-called quasi-analytic solutions. The solutions are intrinsically time-dependent of course. The hope is that such an investigation will lead to a better understanding of when and how models can be of use in studying the dynamical evolution of diseases including, perhaps, the great influenza pandemic of 1918 together with later pandemics and epidemics not excluding the Covid-19 pandemic of the present day.

Dengue is one of the life-threatening common neglected tropical diseases of the world, yet to develop any therapeutic for its treatment and prevention. Although there is a licensed vaccine reported, but becomes less efficacious due to the presence of multiple serovars of the dengue virus (DENV). Thus, an efficacious dengue vaccine potent to work against all the serovars is very crucial and time-demanding. Here we used a comprehensive hierarchical reverse vaccinology approach to design an epitope-based vaccine, targeted against multiple serovars of the DENV. Conservancy and population coverage analysis of the promiscuous epitopes revealed the robust immune response against multiple serovars of the DENV and various ethnicities. Final vaccine constructs comprising of B and T-cell epitopes, Universal pan-HLA DR or PADRE (AKFVAAWTLKAAA) sequence, and an adjuvant (β-defensin) at N-terminal of the construct with suitable linkers. Physiochemical properties and secondary structure profiling of the vaccine protein secured its hydrophilic, thermostable, and other structural nature. Molecular docking analysis indicates the deep binding of the proposed vaccine in the binding groove of the human immune TLR4 receptor present on the dendritic cell. In addition, disulfide engineering was coped to extend its stability. Furthermore, molecular dynamics simulation of the modeled vaccine-TLR8 complex showed minimum deformability. Finally, in silico cloning approach of the vaccine construct within an expression vector (pET28a+) assure good expression. Proposed vaccine may give novel insights for treatment of dengue patients.

In recent decades, power consumption has become an essential factor in attracting the attention of integrated circuit (IC) designers. Multiple-valued logic (MVL) and approximate computing are some techniques that could be applied to integrated circuits to make power-efficient systems. By utilizing MVL-based circuits instead of binary logic, the information conveyed by digital signals increases, and this reduces the required interconnections and power consumption. On the other hand, approximate computing is a class of arithmetic computing used in systems where the accuracy of the computation can be traded-off for lower energy consumption. In this paper, we propose novel designs for exact and inexact ternary multipliers based on carbon-nanotube field-effect transistors (CNFETs). The unique characteristics of CNFETs make them a desirable alternative to MOSFETs. The simulations are conducted using Synopsys HSPICE. The proposed design is compared against existing ternary multipliers. The results show that the proposed exact multiplier reduces energy consumption by up to 6X. At the same time, the best inexact design improves energy efficiency by up to 35X compared to the latest state-of-the-art methods. Using the imprecise multipliers for image processing provides evidence that these proposed designs are a low-power system with an acceptable error.

In this paper, a technique of image watermarking using multiple images as watermarks is presented. The technique is based on transform domain functions including discrete wavelet transform (DWT), discrete cosine transform (DCT) and singular value decomposition (SVD) with an image as the host signal i.e. the watermarks will be used as proofs of the authenticity of the host image. The technique is executed by performing multilevel DWT followed by applying DCT and SVD to both the host and watermark. Multiple watermarks are used for the insurance of better security level. The scheme is immune to common image processing operations & some attacks and exhibits PSNR of 108.3781dB, normalized cross correlation (NCC) over 0.99 and normalized correlation (NC) over 0.99.

Assuming the Multiple Point Principle (MPP) as a new law of Nature, we considered the existence of the two degenerate vacua of the Universe: a) the first Electroweak (EW) vacuum at $v_1\approx 246$ GeV—“true vacuum”, and b) the second Planck scale “false vacuum” at $v_2 \sim 10^{18}$ GeV. In these vacua, we investigated different topological defects. The main aim of the paper is an investigation of the black-hole-hedgehogs configurations as defects of the false vacuum. In the framework of the $f(R)$ gravity, described by the Gravi-Weak unification model, we considered a black-hole solution, which corresponds to a “hedgehog”—global monopole, that has been “swallowed” by the black-hole with mass core $M_{BH}\sim 10^{18}$ GeV and radius $\delta\sim 10^{-21}$ GeV$^{-1}$. Considering the results of the hedgehog lattice theory in the framework of the $SU(2)$ Yang-Mills gauge-invariant theory with hedgehogs in the Wilson loops, we have used the critical value of temperature for the hedgehogs’ confinement phase ($T_c\sim 10^{18}$ GeV). This result gave us the possibility to conclude that the SM shows a new physics (with contributions of the $SU(2)$-triplet Higgs bosons) at the scale $\sim 10$ TeV. This theory predicts the stability of the EW-vacuum and the accuracy of the MPP.

We previously reported that in multiple sclerosis (MS) patients with a progressive form of the disease, spinal cord periplaques extend distance away from plaque borders and are characterized by the co-occurrence of partial demyelination, astrocytosis and low-grade inflammation. However, transcriptomic analyses comparing periplaques to adjacent normal-appearing white matter (NAWM) areas did not allow providing a comprehensive view of molecular events in astrocytes vs oligodendrocytes. Here, we re-assessed our transcriptomic data with the aim of identifying functionally-relevant co-expression networks that would reflect astrocyte vs oligodendrocyte molecular signatures in periplaques. We identified an astrocytosis-related gene module comprising GFAP, the hub gene CX43/GJA1 and a set of transcripts forming a TGFB/SMAD1/SMAD2 genomic signature. Partial demyelination was characterized by a co-expression network which, besides myelin genes, comprised a highly significant number of translation/elongation-related genes. Interestingly, the main oligodendrocyte-related hub we identified was NDRG1, a gene previously shown to be specifically silenced in the NAWM of MS patients. This result indicated that NDRG1 down-regulation could be an important event in the process of periplaque partial demyelination. To establish a putative link between NDRG1 down-regulation and a cytokine/chemokine signature, we then sought to identify cytokine/chemokine genes whose mRNA levels inversely correlated with those of NDRG1. Following this approach we found 5 candidate immune-related genes whose up-regulation associated with NDRG1 down-regulation: TGFB1, PDGFC, IL-17D, IL-33, and IL-12A. From these results we propose that in the spinal cord of MS patients with progressive forms of the disease, TGFB1 may limit acute inflammation but concurrently induce astrocytosis and an alteration of oligodendrocytes terminal differentiation.

2,5-Dihydroxyacetophenone (DHAP) is an active compound obtained from Radix Rehmanniae Preparata, which is widely used as a herbal medicine in many Asian countries. DHAP has been found to possess anti-inflammatory, anti-anxiety, and neuroprotective qualities. For the present study, we evaluated the anti-cancer effects of DHAP on multiple myeloma cells. It was discovered that DHAP downregulated the expression of oncogenic gene products like Bcl-xl, Bcl-2, Mcl-1, Survivin, Cyclin D1, IAP-1, Cyclin E, COX-2, and MMP-9, and upregulated the expression of Bax and p21 proteins, consistent with the induction of G2/M phase cell cycle arrest and apoptosis in U266 cells. DHAP inhibited cell proliferation and induced apoptosis, as characterized by the cleavage of PARP and the activation of caspase-3, caspase-8, and caspase-9. Mitogen-activated protein kinase (MAPK) pathways have been linked to the modulation of the angiogenesis, proliferation, metastasis, and invasion of tumors. We therefore attempted to determine the effect of DHAP on MAPK signaling pathways, and discovered that DHAP treatment induced a sustained activation of JNK, ERK1/2, and p38 MAPKs. DHAP also potentiated the pro-apoptotic and anti-proliferative effects of bortezomib in U266 cells. Our results suggest that DHAP can be an effective therapeutic agent to target multiple myeloma.

Maize is an important staple food crop in sub-Saharan Africa (SSA). However, the average grain yield on farmers’ fields falls considerably short of the demand of the region’s population. In addition, the normal endosperm maize widely consumed in SSA is deficient in vitamin A. Drought, a consequence of climate change, is a major constraint to maize production, resulting in seasonal low grain yield in farmers’ fields. The objectives of this study were to assess the performance of newly developed extra-early maturing provitamin A hybrids under managed drought and well-watered conditions, compare the outcomes of multiple trait base-index and multi-trait genotype-ideotype distance index selection procedures, and identify drought-tolerant hybrids with stable performance across contrasting environments for commercialization in SSA. One hundred and ninety provitamin A hybrids and six checks were evaluated under managed drought and well-watered conditions at Ikenne for two seasons between 2021 and 2023. A 14*14-lattice design was used for the field evaluations under both research conditions. Drought stress was achieved by the complete withdrawal of irrigation water 25 days after planting. Results revealed significant differences among the hybrids under drought and well-watered conditions. Grain yield, ears per plant, and plant aspect under managed drought were correlated to the same traits under well-watered conditions suggesting that the expression of these traits is governed by common genetic factors. Twenty-nine hybrids were identified as top-performing drought-tolerant hybrids by the multiple trait base index and multiple-trait genotype–ideotype distance index. Of the selected outstanding 29 hybrids, 34% were derived from crosses involving the tester TZEEIOR 197, demonstrating the outstanding genetic potential of this inbred line. Further analysis of the 29 selected hybrids revealed TZEEIOR 509 × TZEEIOR 197 as the hybrid that combined the most drought-tolerant adaptive traits. However, the hybrids TZEEIOR 526 × TZEEIOR 97, TZEEIOR 384 × TZEEIOR 30, TZEEIOR 515 × TZEEIOR 249, TZEEIOR 510 × TZEEIOR 197, TZEEIOR 479 × TZEEIOR 197, and TZEEIOR 458 × TZEEIOR 197 were identified as the most stable hybrids across drought and well-watered conditions. These hybrids should be extensively tested in multi-location trials for deployment and commercialization in SSA.

Motivated by the increasing need of optimised micro-devices for droplets production in medical and biological applications, this paper introduces an integrated approach for the study of the liquid-liquid droplet creation in flow-focusing micro cross-junctions. The micro-junction considered is characterised by a restriction of the channels cross-sections in the junction, which has the function of focusing the flow in the region of the droplet formation. The problem is studied numerically in OpenFOAM environment and validated by the comparison with experimental results obtained by high-speed camera images and micro-PIV measurements. The analysis of the forces acting on the dispersed phase during the droplet formation and the diameter of the droplets obtained numerically are considered for the development of a model of the droplet breakup under the squeezing regime. On the basis of energy balancing during the breakup, a relation between interfacial tension, the size of the cross-sections in the junction, and the time interval needed for droplet creation is obtained, which yields a novel correlation between the dimensionless length of the droplet and the dimensionless flow rate. This correlation is general and can be used to predict the droplet diameters produced by similar micro-junctions with different aspect ratios and extended to different geometries of flow-focusing micro-junctions.

This study explores how the properties of heater materials impact nucleate pool boiling using a comprehensive simulation model. The model integrates well-known heat transfer mechanisms, allowing us to assess the effects of two distinct heater materials. Findings indicate that materials with higher thermal conductivity, such as copper, notably improve refrigeration efficiency in nucle- ate boiling. The study provides insights into the relationship between bubble growth, microlayer recovery beneath a bubble, temperature fluctuations, and heater properties. Comparisons between copper and silicon oxide underscore variations in bubble frequency, attributed to differences in bubble growth time, microlayer recovery time, and material-dependent behavior. The influence of neighboring bubbling sites, especially pronounced in silicon oxide due to its low thermal conductivity and diffusivity, was observed. Temperature variations in such materials became highly visible due to their significant inertia in recovery. Simulation results align well with empirical correlations, confirming the model’s versatility in capturing the intricate phenomena of nucleate pool boiling.

We carry out in a thin heterogeneous porous layer, the multiscale analysis of Smoluchowski's discrete diffusion-coagulation equations describing the evolution density of diffusing particles that are subject to coagulate in pairs. Assuming that the thin heterogeneous layer is made of microstructures that are uniformly distributed inside, we obtain in the limit an upscaled model in lower space dimension. We also prove a corrector-type result very useful in numerical computations. In view of the thin structure of the domain, we appeal to a concept of two-scale convergence adapted to thin heterogeneous media to achieve our goal.

Classical numerical methods for solving ordinary differential equations often produce less accurate results when applied to problems with oscillatory or periodic behaviour. To adapt them for such problems, they are usually modified using the exponential fitting technique. This adaptation allows for the construction of new methods from their classical counterparts. The new methods are usually more accurate, efficient and suitable for handling the oscillatory or periodic behaviour of the problem. In this work, we construct a two-parameter exponentially-fitted Taylor method suitable for solving oscillatory or periodic problems that possess two frequencies. The construction algorithm is based on a proposed six-step flowchart discussed by authors in related literature. Two standard test problems were used to illustrate the accuracy and performance of the proposed method.

The generalized dual-kinetic-balance approach for axially symmetric systems is employed to solve the two-center Dirac problem. The spectra of one-electron homonuclear quasimolecules are calculated and compared with the previous calculations. The analysis of the monopole approximation with two different choices of the origin is performed. Special attention is paid to the lead and xenon dimers, Pb82+–Pb82+–e− and Xe54+–Xe54+–e−, where the energies of the ground and several excited σ-states are presented in the wide range of internuclear distances. The developed method provides the quasicomplete finite basis set and allows for construction of the perturbation theory, including within the bound-state QED.

Light-gated ion channel and ion pump rhodopsins are widely used as optogenetic tools and these can control the electrically excitable cells as: (1) they are a single-component system i.e., their sensor and effector functions are encoded by the 7-transmembrane domains and (2) they show fast kinetics with small dark-thermal recovery time. In cellular signaling, a signal receptor, modulator and effector components are involved for attaining synchronous multicomponent regulation. Optical modulation of this network requires either receptor to effector encoded in a single ORF or direct modulation of the effector domain through bypassing all upstream players. Recently discovered modular rhodopsins like rhodopsin guanine cyclase (RhoGC) and rhodopsin phosphodiesterase (RhoPDE) paves the way to establish proof of concept. Light sensor coupled modular system could be expressed in a precise cell type and which holds great potential in the advancement of optogenetics 2.0. It would enable manipulating entire relevant cell signaling system. Here, we had identified 50 novels modular rhodopsins with variant rhodopsins domain and its diverse cognate signaling cascades encoded in a single ORF, which are associated with specialized functions in the cells. These novel modular algal rhodopsins have been characterized functionality based on their sequence and structural homology with previously characterized rhodopsins. Presented novel modular rhodopsins with various effector domains hold potential to expand optogenetics tool kit to regulate various cellular signaling pathways across the diverse biological model systems.

Conventional method for monitoring the IgG levels suffered from some apparent problems such as long assay time, multistep processing, and high overall cost. An effective and suitable optical platform for label-free biosensing has been investigated by the implementation of antibody/antigen immunoassays. Thus, the ultrasensitive detection of IgG levels can be achieved by exploiting the dispersion turning point (DTP) existed in the tapered two-mode fibers (TTMFs) due to the sensitivity will reach ±∞ on either side of the DTP. Tracking the resonant wavelength shift it was found that the fabricated TTMF device exhibited limits of detection (LOD) down up to concentrations of 10 fg/mL of IgG in PBS solution. Such immunosensors based on the DTP have great significance on trace detection of IgG due to simple detection scheme, quick response time, and miniaturation.

We introduce a new generalized inverse (i.e., generalized EP element) which is a natural generalization of EP and *-DMP elements in a Banach *-algebra. We present polar-like characterizations of generalized EP elements. The necessary and sufficient conditions under which the sum of two generalized EP elements is a generalized EP element are investigated. Finally, the generalized core-EP orders for generalized EP elements are characterized.

This paper investigates the classical but yet intriguing question of modeling orthotropic RC floor systems endowed with lightening elements, by means of a uniform orthotropic slab, in order to describe accurately the building response under seismic loads. The simplified method, commonly adopted by engineers, based on the equivalence between the transverse stiffness of the RC elements of the real floor and those of the orthotropic slab is presented. A case study in which this simplified method is used is also provided. Then, an advanced finite elements (FE) based method to determine the elastic properties of the equivalent homogenized orthotropic slab is proposed. Based on the results obtained from the application of this method to a case study, a discussion on the adequacy of the simplified method is also provided.

The variable-length arbitrary Lagrange-Euler (ALE)-ANCF finite element, which employ nonrational interpolating polynomials, cannot exactly describe the rational cubic Bezier curves such as conic and circular curves. The rational absolute nodal coordinate formulation (RANCF) finite element, whose reference length (undeformed length) is constant, can exactly represent the rational cubic Bezier curves. A new variable-length finite element called the ALE-RANCF finite element, which is capable of accurately describe the rational cubic Bezier curves, is proposed by combining the desirable features of the ALE-ANCF and RANCF finite element. In order to control the reference length of ALE-RANCF element within a suitable range, element segmentation and merging schemes are proposed. It is demonstrated that exact geometry and mechanic is maintained after the ALE-RANCF element is divided into two shorter ones, and compared with the ALE-ANCF elements, there are smaller deviations and oscillations after two ALE-RANCF elements are merged into a longer one. Numerical examples are presented and the feasibility and advantages of the ALE-RANCF finite element are demonstrated.

The aim of this research was to investigate the mass, substances and energy flow through two-stroke low speed Diesel engines. For this reason, a zero-dimensional model of the combustion in the engine was developed with a calculated amount and composition of exhaust gases. Due to the large amount of oxygen in the exhaust gases, a ratio of real air consumption and stoichiometric amount of air required for combustion of injected fuel was set. The calculated ratio showed that the engine consumes four times more air than needed for combustion in AFR_stoich. In this work it is called the Air Consumption Factor or Ratio and has not been mentioned in scientific literature before. Air Consumption Ratio is defined as a factor of dry or humid air. To be more comprehensive, a modified diagram of composition of the flow in and out of a two-stroke fuel injection engine and the cylinder was drawn.

: Controlling the distribution of water and wastewater between industrial processes is very vital in rationalizing water and preserving the environment. In this paper, a mathematical technique is proposed to optimize water-wastewater networks; a nonlinear program is introduced to minimize the consumption of freshwater, and consequently, the flowrate of the wastewater dis-charge will be also minimized. A general mathematical model, able to handle industrial plants containing up to eight sources and eight sinks, is developed using LINGO optimization software to facilitate dealing with complex case studies. The introduced model can handle single contam-inant networks as well as multiple contaminants cases. The optimal water network is synthe-sized through two steps; the first step is to introduce the case study data to the developed mathematical model. The second step considers using the optimal solution produced after run-ning the developed LINGO model as feed data for a pre-designed Excel sheet able to deal with these results and simultaneously draw the optimal water-wastewater network. The proposed mathematical model is applied to two case studies; The first case study includes actual data from four fertilizer plants located in Egypt; the water resources and requirements are simultaneously integrated to obtain a sensible cutting in both freshwater consumption (lowered by 52.2%) and wastewater discharge (zero wastewater discharge). The second case study is for a Brazilian pet-rochemical plant; the obtained results showed noticeable reductions in freshwater consumption for the second case study by 12.3 % while the reduction percentage of wastewater discharge is 4.5%.

Cognitive impairment affects 34-65% of People with Multiple Sclerosis (PwMS), significantly impacting their quality of life. Clinicians routinely address cognitive deficits with in-clinic neuro-behavioural interventions, but accessibility issues exist. Telerehabilitation is a promising solution that utilises digital tools for home-based cognitive remediation. This narrative review assessed the feasibility and efficacy of cognitive telerehabilitation in PwMS, identifying 13 relevant studies. Regarding the feasibility of cognitive telerehabilitation, evidence shows adherence rates are generally good, although, surprisingly, not all studies reported a measure of compliance with the cognitive training explored. Considering the efficacy of different rehabilitative techniques on cognitive performance of PwMS, findings are generally inconsistent, with only one study reporting consistently positive results. A range of methodological limitations are reported as potential factors contributing to the variability of results. Overcoming some of these issues will be key. Upcoming research is necessary to determine optimal intervention approaches, long-term effects of rehabilitation, and how to best integrate the use of telerehabilitation into routine clinical practice. By exploiting digital tools in the best way and addressing methodological concerns, home-based rehabilitation holds the potential for improving cognitive functions and enhancing the quality of life in PwMS.

In the discussion on environmental policies, the notion of eco-efficiency is often used. Eco-efficiency is defined as the delivery of products and services with competitive values, while reducing the ecological impacts and satisfying human needs. In an environment of great competitiveness in which the companies operate, the improvements in the productive process is one of the differentiating factors for guaranteeing a strong competition. Also it is essential rationalizing energy consumption and natural resources. For this it is necessary to understand the main operations and dynamics of the company. This work presents an empirical study of a Portuguese company in the industrial sector. The problematic here presented is based on the company’s growing concern to reduce the amount of scrap produced. From the literature research that was performed, a strong dependence relation between the different variables in the extrusion process was found. The main objective of this work is to model the aluminium extrusion process, with the aim of minimizing the production of scrap. For this several variables involved in the process are taking into account. Using statistical techniques, in particular multiple linear regressions, it was possible to identify the importance of the variables under study for the scrap production.

Multiple imputation with chained equations (MICE) is a widespread approach to account for missing data in empirical research. Combining MICE with bootstrapping, that is, repeatedly resampling with replacement from the data to estimate variances and confidence intervals of statistics of interest, is not straightforward. The current document provides an overview of how to use bootstrapping with imputed data in Stata. Two main approaches (impute first and then bootstrap or vice-versa) are discussed and shortly compared. Code is provided for Stata.

Telemonitoring and telerehabilitation have shown promise in delivering individualized healthcare remotely. We introduce STASISM, a Sensor-Based Telerehabilitation and Telemonitoring System, in this work. This platform has been created to facilitate individualized telerehabilitation and telemonitoring for those who need rehabilitation or ongoing monitoring. To gather and analyze pertinent and validated physiological, kinematic, and environmental data, the system combines a variety of sensors and data analytic methodologies. The platform facilitates customized rehabilitation activities based on individual needs, allows for remote monitoring of patients' progress, and offers real-time feedback. To protect the security of patient data and to safeguard patient privacy, STASISM also provides secure data transmission and storage. The platform has the potential to significantly improve the accessibility and efficacy of telerehabilitation and telemonitoring programs, enhancing patients' quality of life and allowing healthcare professionals to provide individualized care outside of traditional clinical settings/

Multiple sclerosis (MS) is a chronic and demyelinating disease with an autoimmune origin, in which inflammation and demyelination lead to neurodegeneration and progressive disability. The treatment target is slowing down the disease course and mitigating the symptoms. Approximately 30 to 50% of patients do not respond optimally to Disease Modifying Therapies (DMTs), in which therapeutic response may be influenced by genetic factors such as genetic variants. Therefore, our study aimed to investigate the association of HLA DRB1*0403 genetic variant and therapeutic response to DMTs in MS. We included 105 patients with MS diagnosis. No evidence of disease activity based on the absence of clinical relapse, disability progression or radiological activity (NEDA-3), was used to classify therapeutic response. Patients were classified as follows: a) control: patients who achieved NEDA-3 b) case: patients who did not achieve NEDA-3. DNA was extracted from peripheral blood leukocytes. HLA DRB1*0403 genetic variant was analyzed by quantitative polymerase chain reaction (qPCR) using TaqMan probes. NEDA-3 was achieved in 86.7% of MS patients treated with DMTs. Genotype frequencies were: GG 50.5%, GA 34.3% and AA 15.2%. No differences were observed in the genetic variant AA between patients who achieved NEDA-3 versus patients who did not achieve NEDA-3 (48.7% vs. 43.1%, p=0.6). We concluded that in Mexican patients with MS, HLA DRB1*0403 was not associated with therapeutic response to DMTs.

Mycotoxins are fungal secondary metabolites, which can cause acute and chronic toxic effects in animals and humans. The present study aimed to determine multi-mycotoxin levels in Algerian workers using urine as target. A method based on a QuEChERS (quick, easy, cheap, effective, rugged, and safe) extraction procedure followed by LC-MS/MS (liquid-chromatography tandem mass spectrometry) was optimized and validated for determination of 11 mycotoxins in 96 urine samples. Different sorbents were tested to be used in the dispersive solid-phase extraction (d-SPE) cleanup step of QuEChERS. The final method was fit-for-purpose and showed good analytical performance in terms of specificity, linearity and precision. All samples contained at least 2 mycotoxins, being toxin-2 (T-2) the most common, which was found in 92.7% of the samples, followed by zearalenone (ZEN) with 90.6% of positive samples, and ochratoxin A (OTA) with 86.4%. T-2 levels ranged from 0.3 μg/L to 36.3 μg/L, while OTA ranged from 0.3 μg/L to 3.5 μg/L and ZEN ranged from 7.6 μg/L to 126.8 μg/L. This was the first mycotoxin biomonitoring study carried out in the Algerian population. The findings highlight the need of accurate data for better risk assessment and the development of better regulation to manage mycotoxin contamination in this country.

Despite the recent approval of novel immunotherapies, as immunomodulatory drug, proteasome inhibitors and anti-CD38 monoclonal antibodies, Multiple Myeloma (MM) remains incurable and the acquisition of triple-refractoriness leads to really dismal outcomes, in even earlier lines of therapy. More recently, innovative therapeutic strategies targeting B cell maturation antigen (BCMA), highly expressed on the plasma cell surface, are drawing different future landscapes in terms of effectiveness and outcomes. Belantamab Mafodotin, a first-in-class anti-BCMA antibody drug conjugates, demonstrated good efficacy and safety profile in triple-refractory patients in the phase 2 DREAMM-2 trial and it was approved for the treatment of MM triple-exposed patients with >4 prior lines of therapy. Here, starting from Belantamab Mafodotin clinical trials also exploring combination studies and different schedules in order to improve its efficacy and toxicity, we focused on real life experiences all over the world, which have confirmed clinical trial data and encourage further Belantamab Mafodotin investigations

A progressive and chronic neurological condition called MSA (Multiple System Atrophy) is characterized clinically by varying degrees of dysautonomia, cerebellar ataxia, and parkinsonism. The concept of mitochondrial dysregulation in MSA is one perspective in handling this neurodegenerative disease. Damage to functional mitochondria is driven by the presence of ɑ-Synuclein-induced mitochondrial localization. The goal of MSA treatment up until now has been to reduce symptoms. One of the innovations in the treatment of MSA could be the novel idea based on mitochondrial reprogramming pathways. Mitochondrial reprogramming can be done in various ways in which the use of hydrogen, magnesium and low-dose hydrogen peroxide.

Objective: The purpose of this study was to investigate the effects of Crocin on brain neuroterophins, cognition, sensory and motor dysfunction and compare to fingolimod effects in experimental model of demyelination with Ethidium Bromide EB in female Wistar rats. Methods: Animals were assigned in to 8 groups; Sham, Sham operated (ShOp), EAE, crocin treated (Cr5,10,20 mg/kg), Vehicle, Fingolompd (Fing) and fingolimod + crocin (Cr+Fing). Demyelination was induced by single dose injection of 10 μl of EB 0.1% into the fourth ventricle of the brain. Crocin and fingolimod were applied for 21 days, daily, oral gavage. BDNF, NGF1, nerve conduction velocities, tail flake latency, balance and behavioral variables were sampled and analyzed by paired t-test and ANOVA test with repeated post hoc measurements. Results: The results showed that crocin improves all studied factors, but remarkable imrovments were observed in dosage of 10 mg/kg. Crocin (10mg/kg) and fingolimod (1mg/kg) significantly improved cognition variables in open field test, sensory and motor nerve conduction velocity, tail flick latency and clinical signs (p<005). In addition, applying of crocin co-administered with fingolimod led to significant increases in all assessed factors, greater than crocin or fingolimod intervention alone (α≤0.001). Conclusion: Based on the current findings, crocin can improve the level of brain neurotrophins, exploratory behavior and nerve conduction after demyelination as close as fingolimod results. So, crocins can be considered as a neuro supportive agent in the management of degenerative diseases maybe similar to fingolimod mechanism.

Introduction: This study aimed to validate the psychometric properties of the German eHealth Impact Questionnaire (eHIQ-G), which is divided into two independently administered and scored parts. Methods: 162 people with MS browsed one of two possible websites containing information on MS and completed an online survey. Internal consistency was assessed by Cronbach’s alpha and structural validity by Confirmatory Factor Analysis. Construct validity was examined by assessing correlations with the eHealth Literacy Questionnaire and the General Self-Efficacy Scale. Moreover, the mean difference of the eHIQ-G score between the two websites was investigated. Results: Cronbach’s alpha for the eHIQ-G subscales ranged from .833 to .885. The eHIQ-G part 1 achieved acceptable levels of goodness-of-fit indices, whereas the fit for the eHIQ-G part 2 was poor and likewise for the alternative modified models. The correlations with the reference instruments were 0.08 – 0.62 and as expected. Older age was related with lower eHIQ-G part 1 score, whereas no significant effect was found for education. Although not significant, the website ‘AMSEL’ reached higher mean scores on eHIQ part 2. Conclusion: The eHIQ-G has good internal consistency, and sufficient structural and construct validity. It will facilitate the measurement of the impact of websites providing health information.

Background and Aim: Multiple sclerosis (MS) is known as an autoimmune disease and a chronic inflammatory condition, inducing a wide variety of mood affective disorders, including depression and feelings of hopelessness in many aspects of patients’ quality of life (QoL). In view of the positive side effects of spirituality and spiritual care on finding appropriate strategies for further adaptation, this study aimed to determine the impact of group spiritual care (GSC) on levels of hope in patients suffering from MS. Materials and Methods: This clinical trial was conducted on a total number of 96 patients with MS, referring to the National Multiple Sclerosis Society (NMSS) in the city of Zahedan, Iran. Following sample selection via the convenience sampling technique, the patients meeting the inclusion criteria were randomized into two groups, i.e., intervention and control. The data collection tools for this purpose included a demographic information form and the Adult Hope Scale (AHS, Snyder et al. 1991), completed by the subjects at the pre- and post-intervention stages. As well, the intervention group received five sessions of GSC during three weeks but the control group members only talked over daily issues along with their mental health problems. The data were also analyzed using the SPSS Statistics software (ver. 14). Results: The Kruskal-Wallis test results revealed that the GSC intervention could have a significant positive effect on raising hope in the patients with MS (p<0.001). Moreover, a significant growth was observed in the scores of hope dimensions including agency and pathway (p<0.001). Conclusion: GSC can effectively boost levels of hope in patients suffering from MS in all dimensions. Therefore, it is recommended to utilize this type of care in order to nurture hope in such individuals.

Background: Rituximab is a monoclonal antibody widely used in the treatment of inflammatory and autoimmune disorders. Despite reports of its effectiveness in the treatment of demyelinating diseases of central nervous system (DDCNS), it is not yet approved for use in these disorders. The aim of this study was to investigate the effectiveness and safety of low dose rituximab in three different subgroups of DDCNS including relapsing-remitting multiple sclerosis (RRMS), secondary-progressive multiple sclerosis (SPMS) and neuromyelitis-optica-spectrum disorders (NMOSD).Methods: In a prospective cohort study, we monitored expanded-disability-status-scale (EDSS), relapses (new attacks) and serum-IgG levels to assess effectiveness and drug-adverse-events for safety in patients with RRMS, SPMS and NMOSD. These patients were candidates to receive rituximab according to our common practice protocol. We switched patients to rituximab if there was poor response to first line therapies. We follow a low dose protocol in our center (500 mg twice, two weeks apart, repeating every six months) and these patients treated in a 4-year period were assessed retrospectively for evaluation of our protocol’s safety and effectiveness. Results: 99 patients (42 RRMS, 43 SPMS and 14 NMOSD) received rituximab for a range of 12 to 40 months period. New attacks occurred in 8 RRMS (19%), 10 SPMS (23%) and 1 NMOSD (7%) patients. EDSS decreased in RRMS and NMOSD cases. Serum-IgG levels decremented in SPMS and NMOSD patients. Drug-adverse-events happened in two cases.Conclusion: In this study, low dose rituximab showed substantial effectiveness in preventing disease progression with a considerably good safety profile.

According to the French Agency for Food, Environmental and Occupational Health & Safety, electromagnetic hypersensitivity affects more than 3 million people in France, and headaches are a very frequent cause of complaint in electrohypersensitive patients, to the point of dominating the clinical picture. These headaches share characteristics with migraine pathology, and clinical improvement with anti-migraine therapy has led us to consider that the headache in the electrohypersensitive patient may be a variant of the migraine disease mediated by the TRPA1 receptor, which if confirmed, would offer effective therapeutic possibilities to relieve the electrohypersensitive patient.

Multiple Sclerosis (MS) has a well established link with Epstein-Barr virus (EBV) and a growing association with human endogenous retroviruses (HERVs). In this review, we described how these two pieces may interact in MS pathogenesis

Tuberculosis (TB) is an infectious-contagious disease caused by M. tuberculosis (Koch’s bacillus). About one-quarter of the world’s population is infected with that bacillus and at risk of developing TB disease. Latent tuberculosis corresponds to people who have been infected by TB bacteria but are not (yet) ill. The most vulnerable population to TB activation includes HIV infected, drug abuse and autoimmune disease patients. Multiple Sclerosis (MS) is a chronic and autoimmune neurological disease caused by lymphocytic infiltration. Its prevalence worldwide is 22.2 million cases of MS. There is a relation between TB and MS: due to immunomodulation or immunosuppression treatment of MS (reactivation of latent infection), or due to the intense inflammatory response before the infection of the bacillus (increased susceptibility to the development of autoimmune diseases). Screening for TB includes complete patient history, physical exam, chest radiography, and Tuberculin Skin Test or IGRA (Interferon Gamma Release Assay). This investigation is suggested when MS drugs (immunomodulatory and immunosuppressant medications) are prescribed. If a patient has positive results, the treatment for MS should not be delayed for the finishing TB treatment. In this paper, considering the high prevalence of tuberculosis, we recommend that TB screening should be also done at the moment of Multiple Sclerosis diagnosis.

STAT3 is an oncoprotein which has been shown to contribute to drug resistance in multiple myeloma (MM). Nonetheless, the clinical utility of STAT3 inhibitors in treating MM has been limited, partly related to some of their pharmacologic properties. To overcome these challenges, our group had previously packaged STAT3 inhibitors using a novel formulation of nanoparticles (NP) and found encouraging results. In this study, we aimed to further improve the pharmacologic properties of these NP by decorating them with monoclonal anti-CD38 antibodies. NP loaded with S3I-1757 (a STAT3 inhibitor), labeled as S3I-NP, were generated. S3I-NP decorated with anti-CD38 (labeled as CD38-S3I-NP) were found to have a similar nanoparticular size, drug encapsulation and loading as S3I-NP. The release of S3I-1757 at 24 hours was also similar between the two formulations. Using Cy5.5 labeling of the NP, we found that the decoration of anti-CD38 on these NP significantly increased the cellular uptake by two MM cell lines (p<0.001). Accordingly, CD38-S3I-NP showed a significantly lower inhibitory concentration at 50% (IC50) compared to S3I-NP in two IL6-stimulated MM cell lines (p<0.001). In a xenograft mouse model, CD38-S3I-NP significantly reduced the tumor size by 4 folds compared to S3I-NP on day 12 after drug administration (p=0.006). The efficacy of CD38-S3I-NP in suppressing STAT3 phosphorylation in the xenografts was confirmed by using immunocytochemistry and western blot analysis. In conclusion, our study suggests that the decoration of anti-CD38 on NP loaded with STAT3 inhibitors can further improve their therapeutic effects against MM.

Multiple sclerosis is an autoimmune disorder where both T cells and B cells are implicated in pathology. However, it remains unclear how these two distinct populations cooperate to drive disease. There is ample evidence from studies in both MS patients and mouse models that Th17, B cells, and follicular T helper (TFH) cells contribute to disease. This review article describes the literature that identifies mechanisms by which Th17, TFH, and B cells cooperatively drive disease activity in MS and EAE. The curation of this literature has identified that CNS-infiltrating TFH cells act with TH17 cell to contribute to an inflammatory B cell response in neuroinflammation. This demonstrates that TFH cells and their products are promising targets for therapies in MS.

The role of pregnancy in multiple sclerosis (MS) is of importance because many patients with MS are young women in the childbearing age who require information to inform their reproductive decisions. Pregnancy is now well-known to be associated with fewer relapses of MS and reduced activity of autoimmune encephalomyelitis (EAE). However, in women with multiple sclerosis, this benefit is not always sufficient to protect against a rebound of disease activity if disease modulating therapy is ceased for pregnancy. There is reason to be concerned that use of assisted reproductive therapies can be associated with relapses of MS. It is thought that the beneficial effects of pregnancy are due to the pregnancy-associated changes in the maternal immune system. There is some evidence of this in human studies and studies of EAE. There is also evidence that having been pregnant leads to better long-term outcome of MS. The mechanism for this is not fully understood but it could result from epigenetic changes resulting from pregnancy or parenthood. Further studies of the mechanisms of the beneficial effects of pregnancy could provide information that might be used to produce new therapies.

An increased risk of multiple sclerosis (MS) had been found when individuals had consumed large amounts of processed meat and sausages at young age (Lauer, 2014). Furthermore it was found in many studies that MS patients had acquired a number of common childhood infections at higher ages than controls. Therefore, MS patients from an epidemiological long-term investigation in Germany and different hospital controls, were evaluated for a statistical interaction of these two factors. 324 MS patients and 242 hospital controls were inquired. The study focussed on age 0 - 16. Subjects were tested for additive interaction by multiple linear regression analysis (Knol et al., 2007). There was an additive interaction of the age at any common childhood infection with the consumption of scalded sausages (regression estimate = 0.1370; standard error = 0.0603; p = 0.0239). In contrast, no such interaction could be shown for: animal fats; smoked meat (e.g. ham and bacon); and cold - smoked German salami. Thus there was a synergy of the intake of scalded sausages (e.g. frankfurters, bolognas, etc.) and age at common childhood infections, for the later risk of MS.

This paper presents a new approach to suppress interference between neighbouring radiating elements resulting from surface wave currents. The proposed technique will enable the realization of low-profile implementation of highly dense antenna configuration necessary in SAR and MIMO communication systems. Unlike other conventional techniques of mutual coupling suppression where decoupling slab is located between the radiating antennas the proposed technique is simpler and only requires embedding linear slots near the periphery of the patch. Attributes of this technique are (i) significant improvement in the maximum isolation between the adjacent antennas by 26.7 dB in X-band, & >15 dB in Ku and K-bands; (ii) reduction in edge-to-edge gap between antennas to 10 mm (0.37λ); and (iii) improvement in gain by >40% over certain angular directions, which varies between 4.5 dBi to 8.2 dBi. The proposed technique is simple to implement at low-cost.

This paper presents a new algorithm for semi-supervised action recognition using adaptive feature analysis. We model the samples of the same action as the same manifold and those of different actions as different manifolds, and integrate feature correlation mining and visual similarity mining into a joint framework. By maximizing the separability between different classes based on the labeled data, the proposed algorithm learns multiple features from labeled data and utilizes the intrinsic geometric structure of the data distribution between labeled and unlabeled data to boost the recognition. We introduce Projected Barzilai-Borwein (PBB) to train a subspace projection matrix as classifier. Extensive experiments on three benchmark datasets demonstrate that our algorithm outperforms the existing semi-supervised action recognition algorithms when there are a few labeled training samples.

When there is uncertainty in the value of parameters of the input random components of a stochastic simulation model, two-level nested simulation algorithms are used to estimate the expectation of performance variables of interest. In the outer level of the algorithm (n) observations are generated for the parameters, and in the inner level (m) observations of the simulation model are generated with the value of parameters fixed at the value generated in the outer level. In this article, we consider the case in which the observations at both levels of the algorithm are independent, showing how the variance of the observations can be decomposed into the sum of a parametric variance and a stochastic variance. Next, we derive central limit theorems that allow us to compute asymptotic confidence intervals to assess the accuracy of the simulation-based estimators for the point forecast and the variance components. Under this framework, we derive analytical expressions for the point forecast and the variance components of a Bayesian model to forecast sporadic demand; and we use these expressions to illustrate the validity of our theoretical results by performing simulation experiments using this forecast model.

Melanoma is a type of highly malignant and metastatic skin cancer. In situ molecular imaging of endogenous levels of the melanoma biomarker tyrosinase (TYR) may decrease the likelihood of mortality. In this study we proposed the weakly fluorescent probe 1-(4-(2-(4-(dicyanomethylene)-4H-chromen-2-yl)vinyl)phenyl)-3-(4-hydroxybenzyl)urea (DCM-HBU), which releases a strong red-shifted fluorescent signal after a TYR-mediated oxidation followed by hydrolysis of the urea linkage. The large Stokes shift of the dye is owed to the recovery of the intramolecular charge transfer (ICT) effect. The resulting probe derivate shows a highly ratiometric fluorescence output. Furthermore, the simultaneous excitation by two near-infrared (NIR) photons of the released DCM-NH2 fluorophore could avoid the usual drawbacks, such as cellular absorption, autofluorescence and light scattering, due to an usually short wavelength of the excitation light on biological systems, resulting in images with deeper tissue penetration. In addition, the probe is useful for the quantitative sensing of TYR activity in vivo, as demonstrated in zebrafish larvae. This new ratiometric two photon NIR fluorescent probe is expected to be useful for the accurate detection of TYR in complex biosystems at greater depths than other one-photon excited fluorescent probes.

We define degree of dependence of two events A and B in a probability space by using Boltzmann-Shannon entropy function of an appropriate probability distribution produced by these events and depending on one parameter (the probability of intersection of A and B) varying within a closed interval I. The entropy function attains its global maximum when the events A and B are independent. The important particular case of discrete uniform probability space motivates this definition in the following way. The entropy function has a minimum at the left endpoint of I exactly when one of the events and the complement of the other are connected with the relation of inclusion (maximal negative dependence). It has a minimum at the right endpoint of I exactly when one of these events is included in the other (maximal positive dependence). Moreover, the deviation of the entropy from its maximum is equal to average information that carries one of the binary trials defined by A and B with respect to the other. As a consequence, the degree of dependence of A and B can be expressed in terms of information theory and is invariant with respect to the choice of unit of information. Using this formalism, we describe completely the screening tests and their reliability, measure efficacy of a vaccination, the impact of some events from the financial markets to other events, etc.

Increasing market participation among smallholder farmers have a big potential to uplift living standards of poor through increasing production and consumption pattern. Although, smallholder farming made 95% of total crop production in Ethiopia, they are exposed to a marketing bottleneck that hinders benefits from their produce. The objective of this study was analyzing factors determining smallholder Teff farmer decision to participate in output market and level of marketed output.The study used data from 190 respondents from four selected Teff dominant kebeles of Gena-Bossa districts in Dawro Zone, through structured questioner. This investigation was imperative because no adequate research has been done in study area in examining the hindering factors of farmers’ market participation. Moreover, in the prior study, different authors come up with varied outcomes in diverse country and geographic location concerning poor farmers’ market participation decision. The descriptive statistics and Heckman two stage econometric methods were employed to analyze data collected from sampled household. The significance of coefficient of inverse Mill’s ratio ( ) indicates the presence of self-selection bias and the effectiveness of applying Heckman two stage model. The results of study show that the smallholder decision to participate in output market were positively influenced by size of land holding, availability of family labor force, education status of household head, accessibility of credit service and access to market price information. On the other hand, size of family member, sex of house hold head being female and distance to market place discourage probability of Teff farmer market participation decision. Moreover, the second stage estimation reveals that, the education status of house hold head, size of farm land, amount of Teff crop produced, accessibility of market information, the size of family labor force and being member to farm cooperative increase the quantity of marketable output, whereas, large number of family size decline the level of Teff crops marketed. The policy that assist poor farmers in obtaining market skills; create affordable credit service; strengthen community based producer groups and capacitating the females socially and economically in the community believed to minimize the problems encountering small farmers in a way to market their crop

Atoms in Molecules (AIM), Natural Bond Orbital (NBO), and normal coordinate analysis have been carried out at the global minimum structures of TH₅⁺ (T = C/Si/Ge). All these analyses lead to a consistent structure for these three protonated TH₄ molecules. The CH₅⁺ has a structure with three short and two long C-H covalent bonds and no H-H bond. Hence, the popular characterization of protonated methane as a weakly bound CH₃⁺ and H₂ is inconsistent with these results. However, SiH₅⁺ and GeH₅⁺ are both indeed a complex formed between TH₃⁺ and H₂ stabilized by a tetrel bond, with the H₂ being the tetrel bond acceptor. The three-center-two-electron bond (3c-2e) in CH₅⁺ has an open structure, which can be characterized as a V-type 3c-2e bond and that found in SiH₅⁺ and GeH₅⁺ is a T-type 3c-2e bond. This difference could be understood based on the typical C-H, Si-H, Ge-H and H-H bond energies. Moreover, this structural difference observed in TH₅⁺ can explain the trend in proton affinity of TH₄. Carbon is selective in forming a ‘tetrel bond’ and when it does, it might be worthwhile to highlight it as a ‘carbon bond’.

The dynamics of a spherical particle in an asymmetric serpentine is studied by finite element method (FEM) simulations in a physically unconstrained system. The two-way coupled time dependent solutions illustrate the path of the particle along a curve where a secondary flow (Dean flow) has developed. The simulated conditions were adjusted to match those of an experiment for which particles were focused under inertial focusing conditions. The obtained rotational modes allowed to infer the influence of the local flow around the particle. We propose a new approach to find the decoupled secondary flow contribution employing a quasi-Stokes flow.

In this letter, it is proposed that cryogenic quantum bits could operate based on the nonlinearity due to the quantum capacitance of two-dimensional Dirac materials, and in particular graphene. The anharmonicity of a typical superconducting quantum bit is calculated and the sensitivity of quantum bit frequency and anharmonicty with respect to temperature are found. Reasonable estimates reveal that a careful fabrication process could reveal the expected properties, thus putting the context of quantum computing hardware into new perspectives.

There are different ways to analyse energy absorbance (EA) in the human auditory system. In previous research, we developed a complete finite element model (FEM) of the human auditory system. In this mentioned work, the external auditory canal (EAC), middle ear, and inner ear (spiral cochlea, vestibule, and semi-circular canals) were modelled based on human temporal bone histological sections. Multiple acoustic, structure and fluid-coupled analyses were conducted using the FEM to perform harmonic analyses in the 0.1–10 kHz range. Once the FEM had been validated with published experimental data, the FEM numerical results were used to calculate the EA or energy reflected (ER) by the tympanic membrane. This EA was also measured in clinical audiology tests which were used as a diagnostic parameter. A mathematical approach was developed to calculate the EA and ER, with numerical and experimental results showing adequate correlation up to 1 kHz. Another published FEM had adapted its boundary conditions to replicate experimental results. Here, we recalculated those numerical results by applying the natural boundary conditions of human hearing and found that the results almost totally agreed with our FEM. This boundary problem is frequent and problematic in experimental hearing test protocols: the more invasive they are, the more the results are affected. One of the main objectives of using FEMs is to explore how the experimental test conditions influence the results. Further work will still be required to uncover the relationship between the middle ear structure and EA to clarify how to best use FEMs. Moreover, the FEM boundary conditions must be more representative in future work to ensure their adequate interpretation.

The predominant management approach for municipal solid waste (MSW) remains disposal, given significant increases in generation and disposal rates of MSW in recent decades. In addition to the well-documented carbon emissions from disposal sites, these sites accumulate numerous elements, the masses of which are substantial globally yet inadequately quantified. The unique combinations of waste constituents, elements, diverse environments, and confined spaces in disposal sites create distinct biogeochemical conditions, setting them apart from any other infrastructure or geological feature on Earth. This review first presents a global summary of the cumulative masses and disposal rates of MSW constituents and associated elements. The five dominant transformation and transport processes influencing disposed elements are examined: biochemical degradation, physicochemical transformation, gas migration, leachate migration, and solid spillage. The magnitudes and rates of the processes corresponding to major disposed elements, including carbon, nitrogen, sulfur, chlorine, and several metals, are systematically summarized. We examine and quantify the potential environmental impacts and health risks associated with element transformation and transport. We also explore the existing knowledge and techniques for resource recovery and site remediation of disposal sites. The distilled compilation of measurements and insights herein serves as a valuable primer for researchers, practitioners, and decision-makers involved in MSW management.

This study investigates the magnetization of Cobalt (Co) nanoparticles with two different crystal structures: a centered cubic (fcc) and an hexagonal close packed (hcp), under the magnetic field of the Earth. For that reason, the hysteresis loops of the two material samples are exported and compared with the corresponding value by experimental procedure in the laboratory under the Earth’s magnetization. For both samples, the nanoparticle number variation and the nearest neighbor distance effect, in the Co hysteresis loop are investigated, structural information that is useful for the sample preparation. For the simulations the Finite Element Method (FEM) was used, while experiments are conducted using a measurement set-up based on fluxgate magnetometers. From the simulation, it is proven that, for both samples, the nanoparticle number effect does not change the hysteresis loop. In contrast, when the distance between the nanoparticles increases, the magnetization obtains smaller value. This study aims to build a novel, simple and economical measurement arrangement enabling in situ magnetic measurements for ferromagnetic nano-material characterization. As the need for continuous knowledge of the condition and the phase of ferromagnetic nanoparticles that is crucial in many applications, like catalytic processes, this work aims to introduce an alternative approach that will add another dimension to conventional chemical reaction engineering this of the magnetic state of the material resolved in time and space and to contribute in the field of the monitoring and the early fault diagnosis of nanoparticle materials.

Introducing the Moving Least-Squares Aided Finite Element Method (MLS-FEM), we present a robust computational technique that effectively evaluates the development of mixing in polymeric mixing devices. Our approach uses the Moving Least-Squares (MLS) interpolant to enhance the classic finite element shape functions. As a result, it becomes possible to treat fixed or moving components, such as rotors of a mixer, as discontinuities within the flow domain. This allows analysis of the flow field with a background mesh independent of the rotors' shape, orientation, and position. We compared the MLS-FEM results with the classical boundary-fitted mesh FEM, which comprises the mesh regeneration steps by the movement of the rotors. We then showed that the new method provides accurate results for the flow field parameters (i.e., the velocity components and the pressure values) and the mixing evolution without requiring mesh regeneration and without compromising accuracy.

Directional solidification experiments were carried out to investigate the effect of micro-alloying element Sn and magnetic field on the solidification of Al-Bi immiscible alloys. Experimental results show that the size distribution of the dispersed particles in the low-speed solidified Al-3.4wt%Bi alloy presents two peaks, while it only shows one peak when solidified at a relatively high speed. The addition of Sn not only can enhance the nucleation rate and the number density of the Bi-rich droplets in the sample, but also decrease the Marangoni migration velocity and the axial resultant velocity of minority phase droplets in front of the solidification interface. Thereby it promotes the formation of Al-Bi alloys with a well-dispersed microstructure. A static magnetic with the strength of 0.2T increase the number density of the dispersed particles and decrease the average size and the size distribution width of the dispersed particles. Under the effect of Sn addition and static magnetic field, the average radius of the dispersed particles <R> and the solidification velocity V_0 satisfy <R>∝〖V_0〗^(-1/3) when the alloy was solidified at a relatively low velocity, <R> and V_0 satisfy <R>∝〖V_0〗^(-1/2) when the alloy is solidified at a high velocity.

Evidence regarding the effect of the onlay preparation design for different CAD/CAM restorative materials considering the preservation of cusps is lacking. Molars were 3D modeled in four preparation designs for onlay restoration: traditional design with functional cusp coverage (TFC), non-retentive design with functional cusp coverage (NFC), traditional design with non-functional cusp coverage (TNFC), non-retentive design with non-functional cusp coverage (NNFC). Restorations were simulated with two CAD/CAM restorative materials: LD – lithium disilicate (IPS e.max CAD) and RC - resin composite (GrandioBloc). A 100 N axial load was applied to the occlusal surface simulating the centric contact point. Von Mises (VM) and maximum principal (Pmax) stresses were evaluated for restorations, cement layer and dental substrate. The non-retentive preparation design reduced the stress concentration in the tooth structure in comparison to the conventional retentive design. For LD onlays, the stress distribution on the restoration intaglio surface showed that the preparation design as well as the prepared cusp, influenced the stress magnitude. The non-retentive preparation design provided better load distribution in both restorative materials and more advantageous for tooth structure. The resin composite restoration on non-functional cusp is recommended when functional cusp is preserved, in order to associate conservative dentistry and low stress magnitude.

The trace element copper (Cu) is part of our nutrition and essentially needed for several cuproenzymes that control redox status and support the immune system. In blood, the ferroxidase ceruloplasmin (CP) accounts for the majority of circulating Cu and serves as transport protein. Both Cu and CP behave as positive, whereas serum selenium (Se) and its transporter selenoprotein P (SELENOP) behave as negative acute phase reactants. In view that coronavirus disease (COVID-19) causes systemic inflammation, we hypothesized that biomarkers of Cu and Se status are regulated inversely, in relation to disease severity and mortality risk. Serum samples from COVID-19 patients were analysed for Cu by total reflection X-ray fluorescence and CP was quantified by a validated sandwich ELISA. The two Cu biomarkers correlated positively in serum from patients with COVID-19 (R=0.42, p&lt;0.001). Surviving patients showed higher mean serum Cu and CP concentrations in comparison to non-survivors ([mean+/-SEM], Cu; 1475.9+/-22.7 vs. 1317.9+/-43.9 µg/L; p&lt;0.001, CP; 547.2.5 +/- 19.5 vs. 438.8+/-32.9 mg/L, p=0.086). In contrast to expectations, total serum Cu and Se concentrations displayed a positive linear correlation in the patient samples analysed (R=0.23, p=0.003). Serum CP and SELENOP levels were not interrelated. Applying receiver operating characteristics (ROC) curve analysis, the combination of Cu and SELENOP with age outperformed other combinations of parameters for predicting risk of death, yielding an AUC of 95.0%. We conclude that the alterations in serum biomarkers of Cu and Se status in COVID-19 are not compatible with a simple acute phase response, and that serum Cu and SELENOP levels contribute to a good prediction of survival. Adjuvant supplementation in patients with diagnostically proven deficits in Cu or Se may positively influence disease course, as both increase in survivors and are of crucial importance for the immune response and antioxidative defence systems.

This study determines the equivalent stress intensity factor (SIF) model that best fits the experimental behavior of low-carbon steel under mixed mode (I and II). The study assessed Tanaka, Richard, and Pook's equivalent SIF models. The theoretical values used for comparison correspond to experimental results in a modified C(T) geometry by machining a hole ahead of the crack tip subjected to fatigue loads with a load ratio of R = 0.1. The comparison involved the SIF for six experimental points and the values computed through the numerical simulation. The Paris, Klesnil, and modified Forman-Newman crack growth models were used with each equivalent SIF to analyze the prediction in the estimated number of cycles. The Klesnil model showed the closest prediction since the error between the calculated and experimentally recorded number of cycles is the lowest. However, the material behavior reflects a reduced crack propagation rate attributed to plasticity in the crack tip. Results suggest that Asaro equivalent SIF conservatively estimates the element lifespan with increasing errors from 2.3% at the start of growth to 27 % at the end of the calculation.

Gender has been a rarely addressed aspect in digital game-based learning (DGBL). Likewise, mixed results have been presented regarding the effects according to gender and the conditions that generate these effects. The present work studies the effects of a drill-and-practice mathe-matical game on primary students. The study focused on an analysis by gender, measuring learning performance, and motivation in the practice activity. Also, two instructional mechanics were considered regarding the question answering, a multiple-try (MTF) and a single-try (STF) condition, to search for possible differences. A total of 81 students from 4 courses and 2 schools participated in the experiment. The study's main findings were that: (a) the girls outperformed boys in terms of students' learning gains, (b) girls presented lower levels of competence and autonomy than boys, (c) in the MTF, girls presented lower levels of autonomy but no differences in competence contrasted to boys, (d) in the STF, girls presented lower levels of competence but no differences in autonomy against boys, and (e) no differences existed in interest, effort and value among gender overall o per instructional condition. This study enhances the knowledge of gender differences under diverse instructional settings, in particular providing insights into possible differences by gender when varying the number of attempts provided to students.

As the adoption of renewable energy sources grows, ensuring a stable power balance across various time frames has become a central challenge for modern power systems. In line with the "dual carbon" objectives and the seamless integration of renewable energy sources, harnessing the advantages of various energy storage resources and coordinating the operation of long-term and short-term storage have become pivotal directions for future energy storage deployment. To address the complexities arising from the coupling of different time scales in optimizing energy storage capacity, this paper proposes a method for energy storage planning that accounts for power imbalance risks across multiple time scales. Initially, the Seasonal and Trend decomposition using the Loess (STL) decomposition method is utilized to temporally decouple actual operational data. Subsequently, power balance computations are performed based on the obtained data at various time scales to optimize the allocation of different types of energy storage capacities and assess the associated imbalance risks. Finally, the effectiveness of the proposed approach is validated through hourly applications using real-world data from a province in China over recent years.

23-Hydroxy ursolic acid (23-OH UA) is a potent atheroprotective and anti-obesogenic phytochemical, with anti-inflammatory and inflammation resolving properties. In this study, we examined whether dietary 23-OH UA protects mice against the acute onset and progression of experimental autoimmune encephalomyelitis (EAE), a mouse model of multiple sclerosis (MS). Female C57BL/6 mice were fed either a defined low-calorie maintenance diet (MD) or an MD supplemented with 0.2 % wgt/wgt 23-OH UA for 5 weeks prior to actively inducing EAE and during the 30 days post-immunization. We observed no difference in the onset of EAE between both groups of mice, but ataxia and EAE disease severity were suppressed by 52% and 48%, respectively, and disease incidence was reduced by over 49% in mice that received 23-OH UA in their diet. Furthermore, disease-associated weight loss was strikingly ameliorated in 23-OH UA-fed mice. ELISPOT analysis showed no significant differences in frequencies of T cells producing IL-17 or IFN- between 23-OH UA fed mice and control mice, suggesting that 23-OH UA does not appear to regulate peripheral T-cell responses. In summary, our findings demonstrate that dietary 23-OH UA may represent an effective oral adjunct therapy for the prevention and treatment of relapsing-remitting MS.

Steroid hormones have diverse roles in pregnancy; some, such as progesterone and its metabolites, help stabilise pregnancy and can very likely influence the stability of pregnancy and the onset of labour. Changes and disorders in steroidogenesis may be involved in several pregnancy pathologies, such as premature delivery, preeclampsia, and intrahepatic cholestasis. To date, only a few studies have performed steroid analysis in multiple pregnancies. However, these studies offered a limited analysis of the steroidome in children and mothers with multiple pregnancies. Our team and a team from the Department of Steroids and Proteofactors of the Institute of Endocrinology in Prague investigated multiple pregnancies regarding the biosynthesis, transport, and effects of steroids. We recruited two groups of patients: pregnant women with multiple pregnancies as the study group and singleton pregnancies as the control group. Blood samples were drawn from the participants and analysed. Information about the mother, foetus, delivery, and newborn was extracted from medical records. The data were then analysed. The gestational age of twin pregnancies during delivery ranged from 35+3 to 39+3 weeks, while it was 38+1 to 41+1 weeks for the controls. Our findings provide answers to questions regarding the steroidome in multiple pregnancies.

Background. The purpose of the study was to evaluate the intensity and frequency of low back pain (LBP) in people with multiple sclerosis (PwMS) and the patient's knowledge of physiotherapeutic methods of combating. Methods. In this study, patients with confirmed multiple sclerosis were selected. The study was carried out using an original survey questionnaire and a numerical pain intensity scale (Visual Analogue Scale). PwMS were divided into 3 age groups: 18-30 years, 31-50 years, and over 50 years. Results. Ninety PwMS (68 women and 22 men) aged 18 to 60 years were included in the study. The mean duration of the disease was 9.5±4.9 years, and the mean EDSS was 3.5±1.6. Most of the patients had a relapse-remitting form. 68.9% of PwMS felt lower back pain (n = 62). The relationship tested was statistically significant (p=0.0000012), and the strength of the relationship was high (rc=0.695). The average level of low back pain among PwMS was 4.7 out of 10 on the VAS scale. The prevalence of LBP was higher in female patients (p<0.001), with a secondary progressive form (p<0.001) and with a longer duration of the disease (p=0.023). The most widely used methods of LBP therapy were kinesitherapy and manual therapy. Conclusions. LBP is common in multiple sclerosis. A female sex, a secondary progressive form of MS, and a longer duration of the disease increased the risk of LBP. It is important to implement properly planned physiotherapy activities and educate patients on how to combat LBP.

Multiple sclerosis (MS) is a chronic inflammatory autoimmune disease of the central nervous system. According to recent studies, cellular senescence caused by telomere shortening may contribute to the development of MS. Aim of the study: to determine the associations of TEP1 rs1760904, rs1713418, TERC rs12696304, rs35073794 gene polymorphisms with the occurrence of MS. Methods: The study included 200 patients with MS and 230 healthy controls. Genotyping of TEP1 rs1760904, rs1713418 and TERC rs12696304, rs35073794 was performed using RT-PCR. Statistical analysis of the obtained data was performed using the program "IBM SPSS Statistics 29.0". Haplotype analysis was performed using the online program "SNPStats". Results: The TERC rs12696304 G allele of this SNP is associated with a 1.4-fold lower odds of developing MS (p=0.035). TERC rs35073794 is associated with an approximately 2.4-fold reduced odds of MS occurrence in the codominant, dominant, overdominant, and additive models (p < 0.001; p < 0.001; p < 0.001; p < 0.001, respectively). Haplotype analysis shows that the rs1760904-G - rs1713418-A haplotype is statistically significantly associated with a 1.75-fold increased odds of developing MS (p=0.006). The rs12696304-C - rs35073794-A haplotype is statistically significantly associated with a 2-fold decreased odds of developing MS (p=0.008). In addition, the rs12696304-G - rs35073794-A haplotype was found to be statistically significantly associated with a 5.3-fold decreased odds of developing MS (p&lt;0.001). Conclusion: Current evidence may suggest a protective role of TERC SNP in the occurrence of MS, while TEP1 has the opposite effect.

Interferon-beta is one of the most widely prescribed disease-modifying therapies for multiple sclerosis patients. However, this treatment is only partially effective, and a significant proportion of patients do not respond to this drug. This paper proposes an alternative fuzzy logic system based on the opinion of a neurology expert to classify relapsing-remitting multiple sclerosis patients: high, medium, and low responder to interferon-beta. Also, a pipeline prediction model trained with biomarkers associated to interferon-beta response is proposed for predicting whether patients are potential candidates to be treated with this drug, in order to avoid ineffective therapies. The classification results shows that the fuzzy system presents a 100% efficiency compared with an unsupervised hierarchical clustering method (52%). So, the performance of the prediction model is evaluated, and a 0.8 testing accuracy is achieved. Hence, a pipeline model including data standardization, data compression, and a learning algorithm, can be a useful tool for getting reliable predictions about the response to interferon-beta.

Introduction: Unlike cigarette smoking, secondhand smoke (SHS) has not been as well described as an environmental risk for Multiple sclerosis (MS) nor as a risk factor for disease progression. We systematically reviewed the association between SHS and the risk of onset and/or progression of MS.Methods: We systematically screened MEDLINE/PUBMED, Science Direct, LILACs, and SCIELO searching for publications between January 1st , 2010, and July 5, 2021 with the following keywords: “multiple sclerosis and smoking”; “multiple sclerosis and passive smoking”; “multiple sclerosis and secondhand smoking”. An 11-year filter was applied from 2010 to 2021. Results: Fifteen articles were included in this review, which consisted of systematic reviews with meta-analysis (N = 2), systematic reviews (N = 2), and observational studies (N = 11). Both meta-analyses reported an impact of SHS on MS onset among secondhand smokers. One of the systematic reviews selected two observational studies showing the association between SHS and MS development, and one study that did not find a significant association between SHS and the risk of MS development. The other systematic review identified selected eight articles showing a relationship between SHS and MS. Seven observational studies reported higher odds of MS onset when associated with SHS. Four observational studies did not show a relationship between SHS and MS onset or progression.Discussion: Most articles showed a positive association between SHS exposure and the risk of developing MS. On the other hand, an association between SHS and a higher risk for MS progression could not be established.

Several preclinical and clinical reports have demonstrated that levels of circulating high mobility group box 1 protein (HMGB1) are increased early after trauma and are associated with systemic inflammation and clinical outcomes. However, the mechanisms of the interaction between HMGB1 and inflammatory mediators that lead to the development of remote organ damage after trauma remain obscure. HMGB1 and inflammatory mediators were analyzed in plasma from 54 combat casualties, collected on admission to a military hospital in Iraq, and at 8 and 24 hours after admission. Forty-five (83%) of these patients had traumatic brain injury (TBI). Nine healthy volunteers were enrolled as controls. HMGB1 plasma levels were significantly increased in the first 8 hours after admission, and were found to be associated with systemic inflammatory responses, injury severity score, and presence of TBI. These data provided the rationale for designing experiments in rats subjected to blast injury and hemorrhage, to explore the effect of HMGB1 inhibition by CX-01. Animals were cannulated, then recovered for 5-7 days before blast injury in a shock tube and volume-controlled hemorrhage. Blast injury and hemorrhage induced an early increase in HMGB1 plasma levels that coincided with severity of tissue damage and mortality. CX-01 inhibited systemic HMGB1 release, decreased local and systemic inflammatory responses, significantly reduced tissue and organ damage, and tended to increase survival. These data suggest that CX-01 has potential as an adjuvant treatment for traumatic hemorrhage.