Near-fault ground motions can cause severe damage to civil structures, including bridges. Safety assessment of these structures for near fault ground motion is usually performed through Non-Linear Dynamic Analyses, while faster methods are often used. IMPAb (Incremental Modal Pushover Analysis for Bridges) permits to investigate the seismic response of a bridge by considering the effects of higher modes, which are often relevant for bridges. In this work, IMPAb is applied to a bridge case study considering near-fault pulse-like ground motion records. The records were analyzed and selected from the European Strong Motion Database and the pulse parameters were evaluated. In the paper results from standard pushover procedures and IMPAb are compared with nonlinear Response-History Analysis (NRHA), considering also the vertical component of the motion, as benchmark solutions and incremental dynamic analysis (IDA). Results from the case study demonstrate that the vertical seismic action has a minor influence on the structural response of the bridge. Therefore IMPAb, which can be applied considering vertical motion, remains very effective conserving the original formulation of the procedure, and can be considered a well performing procedure also for near-fault events.

A vast majority of the countries is under the economic and health crises due to the current epidemic of coronavirus disease 2019 (COVID-19). The present study analyzes the COVID-19 using time series, which is an essential gizmo for knowing the enlargement of infection and its changing behavior, especially the trending model. We have considered an autoregressive model with a non-linear time trend component that approximately converted into the linear trend using the spline function. The spline function split the COVID-19 series into different piecewise segments between respective knots and fitted the linear time trend. First, we obtain the number of knots with its locations in the COVID-19 series and then the estimation of the best-fitted model parameters are determined under Bayesian setup. The results advocate that the proposed model/methodology is a useful procedure to convert the non-linear time trend into a linear pattern of newly coronavirus case for various countries in the pandemic situation of COVID-19.

A large number of bridges are designed and built without considering seismic actions and, differently from buildings, there are currently no comprehensive guidelines to evaluate existing bridges without performing, as in the well known incremental dynamic analysis (IDA), complex non linear dynamic analyses (RHA). Bridges are structurally very different from building but, at the same time, are sensitive to higher modes as well as many multi-storey buildings that inspired innovative pushover procedures such as the well known modal pushover analysis (MPA). In the present study the incremental modal pushover analysis (IMPA), a pushover based approach already proposed and applied on buildings by the same authors, is revised and proposed for bridges (IMPAβ). IMPAβ accounts for the effects of higher modes in order to accurately estimate the seismic response of bridges; the effect of higher modes is considered by introducing a suitable number of modes to ensure the participation of a predefined total effective modal mass. The efficiency of the proposed method is demonstrated by conducting a study on two bridges, one regular and one irregular, and the IDA analysis is employed as reference solution. Numerical results indicate good accuracy of the proposed method in assessing the seismic response and a very good accuracy if compared to other available pushover procedures available in the literature.

To investigate the effect of Polyvinylpyrrolidone (PVP) addition and consequently porosity, two different sets of membranes are manufactured, since PVP is a widely used poring agent which has an impact on the mechanical properties of the membrane material. The first set (PAN 1) includes PAN and the necessary solvent while the second set (PAN 2) is made of PAN and PVP. These membranes are put through several characterisation processes including tensile testing. The obtained data are used to model the static behaviour of the membranes with different geometries, but similar loading and boundary conditions that represent their operating conditions. This modelling process is undertaken by using finite element method. The main idea is to investigate how geometry affects the load-carrying capacity of the membranes. Alongside membrane modelling, their materials are modelled with representative elements with hexagonal and rectangular pore arrays (RE) to understand the impact of porosity on the mechanical properties. Exploring the results, the best geometry is found as the elliptic membrane with the aspect ratio 4 and the better RE as the hexagonal array which can predict the elastic properties with an approximate error of 12%.

The paper presents the relationship between the efficiency of the process of skin onion peeling and its effect in the form of waste. The research was carried out on a pilot test stand for onion peeling. The process variables were compressed air with a pressure of (p) and valve controlling opening time of flow (t). The experiment took into account the influence of the onion diameter (d0) and its hardness (H). The obtained results were subjected to statistical analysis. Standard deviations were of the percentage loss of onion mass in the form of the skin removed of onion peeling in the process in relation to obtained aver-age values. Tukey's multiple comparison test was performed in order to identify the importance of individual process variables on the final effect of onion peeling. This was the basis for the development of a predictive model in the form of a nonlinear regression Mp=f(p,t,d0,H), which is a mathematical description of the peeling onion skin process . Finally, the response surface area of relationship between analyzed variables was determined. The results of research showed the peeling efficiency of the onion and waste of skin mass depend on the compressed air pressure. Extending the onion blowing time does not improve the process efficiency, while the hardness and size of the onion are irrelevant to the process.

In this article, the usual factorials and binomial coefficients have been generalized and extended to the negative integers. Basing on this generalization and extension, a new kind of polynomials has been proposed, which led directly to the non-classical hypergeometric orthogonal polynomials and the non-classical second-order hypergeometric linear DEs. The resulting polynomials can be used in non-relativistic and relativistic QM, particularly, in the case of the Schrödinger equation, and Dirac equations for an electron in a Coulomb potential field.

This study involved a comprehensive examination of sensory attributes in Bísaro dry-cured loins, including odor, androsterone, scatol, color, fat color, hardness, juiciness, chewiness, flavor intensity, and flavor persistence. Analysis of 40 samples revealed a wide variation in these attributes, ensuring a robust margin for multivariate calibration purposes. The respective near-infrared (NIR) spectra unveil distinct peaks associated with significant components such as protein, lipid, and water. Support Vector Regression (SVR) models were methodically calibrated for all sensory attributes, with optimal results using multiplicative scattering correction pre-treatment, MinMax normalization, and radial base kernel (non-linear SVR model). The predictive models exhibited acceptable results, characterized by R-squared values close to 1 (0.9616 - 0.9955) and low RMSE values (0.0400 – 0.1031). The prediction set's relative standard deviation (RSD) remained under 5%. Comparisons with prior research revealed significant improvements in prediction accuracy, particularly when considering attributes like pig aroma, hardness, fat color, and flavor intensity. This research underscores the potential of advanced analytical techniques to improve the precision of sensory evaluations in food quality assessment.

Gradual disability worsening in Multiple Sclerosis (MS) is indicative of confirmed progression that mostly involves progression independent of relapse activity (PIRA) and is associated with neurodegeneration. Insights from pathology reveal grey matter involvement (neocortex, hippocampus, spinal cord, and deep grey matter structures) and microglia activation in early stages of MS. Cortical lesions result in thinning and atrophy and are considered accurate predictors of disability progression and cognitive decline.Neuroimaging biomarkers, such as high-resolution 7T MR images and TSPO-PET, have been examined for the detection of cortical pathology linked to cognitive deficits and thus progression, but are limited in clinical practice due to availability, time constraints, and cost.Electroencephalography (EEG) emerges as a non-invasive, cost-effective tool that reflects cortical activity in MS. Its potential in monitoring cognitive impairment is explored by focusing on nonlinear EEG analysis. The MuST PREDICT^TM project aims to extract linear and nonlinear EEG features, investigating their role in predicting disease progression and optimizing treatment. The study employs retrospective, cross-sectional, and prospective designs, utilizing EEGs from various MS forms, cognitive assessments, serum/cerebrospinal fluid biomarkers and neuroimaging. The methodology involves time-based and spectral feature extraction, employing artificial intelligence classifiers and brain criticality-based approaches.The conceptual framework of an innovative modality is herein presented, that would EEG for early MS progression detection. Standardization of the methodology could lead to the creation of a digital tool for better prognostication and treatment strategy optimization.

The Langmuir isotherm is a widely used model for analyzing adsorption equilibrium data. This study evaluated the efficiency and accuracy of all four linear forms of the Langmuir isotherm and its non-linear form using 67 experimental data sets selected from the literature. The results showed that only if all four linear forms simultaneously show high accuracy, then the non-linear form also shows high accuracy, and therefore it can be said that the process probably follows the Langmuir isotherm. On the contrary, when at least one of the four linear forms of the Langmuir isotherm has low accuracy, it means that the non-linear form also has low accuracy, and it can be concluded that this process does not follow the Langmuir isotherm. This research suggests that all four linear forms of the Langmuir isotherm should be evaluated simultaneously to conclude whether the studied system follows the Langmuir isotherm or not. In other words, relying on only one of the four linear forms of the Langmuir isotherm to model adsorption and calculate the Langmuir constant and maximum adsorption capacity is an incomplete approach, contrary to the conventional approach.

The motion of a circular elastic plate floating on the surface is investigated in the time–domain. The solution is found from the single frequency solutions and the method to solve for the circular plate is given using the eigenfunction matching method. Simple plane incident waves with a Gaussian profile in wavenumber space are considered and a more complex focused wave group is considered. Results are given for a range of plate and incident wave parameters are investigated. Code is provided to show how to simulate the complex motion.

This addendum contains clarifications and a sharpening of some of the results on the VIT transform framework developed in [1]. The focus is on the right-coefficient and left- coefficient forms of the transform, the extraction of a first-order term from a left polynomial fraction, and the application to linear time-varying systems.

This work introduces a new architecture for a time-domain feedback-based beamformer designed to meet real-time processing demands. The primary goal of this design is to locate reflective sources by estimating their direction of arrival (DOA) and signal range. Incorporating a feedback mechanism in this architecture is a unique aspect that refines localization precision. We conduct an in-depth analysis highlighting their respective benefits and limitations to compare the effectiveness of time-domain feedback beamforming against conventional time-domain methods. Our evaluation of the proposed architecture, based on critical performance indicators such as peak-to-sidelobe ratio, mainlobe width, and directivity factor, demonstrates its ability to improve beamformer effectiveness significantly.

We present a new method of estimating fitness of countries and complexity of products by exploiting a non-linear non-homogeneous map applied to the publicly available information on the goods exported by a country. The non homogeneous terms guarantee both convergence and stability. After a suitable rescaling of the relevant quantities, the non homogeneous terms are eventually set to zero so that this new method is parameter free. This new map reproduces the findings of the method proposed by Tacchella et al. [1], and allows for an approximate analytic solution in case of actual binarized matrices based on the Revealed Comparative Advantage (RCA) indicator. This solution is connected with a new quantity describing the neighborhood of nodes in bipartite graphs, representing in this work the relations between countries and exported products. Moreover, we define the new indicator of country net-efficiency quantifying how a country efficiently invests in capabilities able to generate innovative complex high quality products. Eventually, we demonstrate analytically the local convergence of the algorithm.

Anomalous waves and rogue events are closely associated with irregularities and unexpected events occurring at various levels of physics, such as in optics, in oceans and in the atmosphere. Mathematical modeling of rogue waves is a highly actual field of research, which has evolved over the last decades into a specialized part of mathematical physics. The applications of the mathematical models for rogue events is directly relevant to technology development for prediction of rogue ocean waves, and for signal processing in quantum units. In this survey, a comprehensive perspective of the most recent developments in methods for representing rogue waves is given, along with discussion of the devised and forms and solutions. The standard nonlinear Schrödinger equation, the Hirota equation, the MMT equation and further to other models are discussed, and their properties highlighted. This survey shows that the most recent advancement in modeling rogue waves give models which can be used to establish methods for prediction of rogue waves at open seas, which is important for the safety and activity of marine vessels and installations. The study further puts emphasis on the difference between the methods, and how the resulting models form a basis for representing rogue waves in various forms, solitary or with a wave-background. This review has also a pedagogic component directed towards students and interested non-experts, and forms a complete survey of the most conventional and emerging methods published until recently

The human immunodeficiency virus (HIV) continues to pose a significant global health challenge, with millions of people affected and new cases emerging each year. While various treatment and prevention methods exist, including antiretroviral therapy and non-vaccine approaches, developing an effective vaccine remains the most crucial and cost-effective solution to combat the HIV epidemic. Despite significant advancements in HIV research, the HIV vaccine field has faced numerous challenges, and only one clinical trial has demonstrated a modest level of efficacy. This review delves into the history of HIV vaccines and the current efforts in HIV prevention, emphasizing pre-clinical vaccine development using the non-human primate model (NHP) of HIV infection. NHP models offer valuable insights into potential preventive strategies for combating HIV, and they play a vital role in informing and guiding the development of novel vaccine candidates before they can proceed to human clinical trials.

Kinetic parameters of SO2 adsorption on unburned carbons from lignite fly ash and activated carbons based on hard coal dust were determined. The model studies were performed using the linear and non-linear regression method for the following models: pseudo first and second-order, intraparticle diffusion, and chemisorption on a heterogeneous surface. The quality of the fitting of a given model to empirical data was assessed based on: R2, R, Δq, SSE, ARE, χ2, HYBRID, MPSD, EABS, and SNE. It was clearly shown that it is the linear regression that more accurately reflects the behaviour of the adsorption system, which is consistent with the first-order kinetic reaction – for activated carbons (SO2+Ar) or chemisorption on a heterogeneous surface – for unburned carbons (SO2+Ar and SO2+Ar+H2O(g)+O2) and activated carbons (SO2+Ar+H2O(g)+O2). Importantly, usually, each of the approaches (linear/non-linear) indicated a different mechanism of the studied phenomenon. A certain universality of the χ2 and HYBRID functions has been proved, the minimization of which repeatedly led to the lowest SNE values for the indicated models. Fitting data by any of the non-linear equations based on the R or R2 functions only, cannot be treated as evidence/prerequisite of the existence of a given adsorption mechanism.

Time series forecasting has been a challenging area in the field of Artificial Intel-ligence. Various approaches such as linear Neural Networks, Recurrent Linear Neural Networks, Convolutional Neural Networks and recently Transformers have been attempted for the time series forecasting domain. Although, Trans-former-based architectures have been outstanding in the Natural Language Pro-cessing domain, especially in autoregressive language modeling, the initial at-tempts to use transformers in the time series arena have met with mixed success. One of the recent papers demonstrated that modeling the multi-variate time se-ries problem as independent channels on a transformer architecture produced lower mean square and mean absolute errors on benchmarks, however, another recent paper claimed that a simple linear neural network out-performs previous approaches including transformer-based designs. We investigate this paradox in detail comparing the linear Neural Network and Transformer based designs, provide insights to why a certain approach may be better for a particular type of problem. We also improve upon the recently proposed simple linear Neural Network based architecture by using dual pipelines with batch normalization and reversible instance normalization. Our enhanced architecture outperforms all existing architectures for time series forecasting on majority of the popular benchmarks.

In the framework of the self-consistent Maxwell-Pauli theory, the non-linear Pauli equation is obtained. Stationary and nonstationary solutions of the nonlinear Pauli equation for the hydrogen atom are studied. We show that spontaneous emission and the related rearrangement of the internal structure of an atom, which is traditionally called a spontaneous transition, have a simple and natural description in the framework of classical field theory without any quantization and additional hypotheses. The behavior of the intrinsic magnetic moment (spin) of an electron wave in an external magnetic field is considered. We show that, according to the self-consistent Maxwell-Pauli theory, in a weak magnetic field, the intrinsic magnetic moment of an electron wave is always oriented parallel to the magnetic field strength vector, while in a strong magnetic field, depending on the initial orientation of the intrinsic magnetic moment, two orientations are realized: either parallel or antiparallel to the magnetic field strength vector.

This study aimed to apply different complexity-based methods to surface electromyography (EMG) in order to detect neuromuscular changes after realistic warm-up and stretching procedures. Sixteen volunteers conducted two experimental sessions. They were tested before, after a standardized warm-up, and after a stretching exercise (static or neuromuscular nerve gliding technique). Tests included measurements of the knee flexion torque and EMG of biceps femoris (BF) and semitendinosus (ST) muscles. EMG was analyzed using the root mean square (RMS), sample entropy (SampEn), percentage of recurrence and determinism following a recurrence quantification analysis (%Rec and %Det) and a scaling parameter from a detrended fluctuation analysis. Torque was significantly greater after warm-up as compared to baseline and after stretching. RMS was not affected by the experimental procedure. In contrast, SampEn was significantly greater after warm-up and stretching as compared to baseline values. %Rec was not modified but %Det for BF muscle was significantly greater after stretching as compared to baseline. The a scaling parameter was significantly lower after warm-up as compared to baseline for ST muscle. From the present results, complexity-based methods applied to the EMG give additional information than linear-based methods. They appeared sensitive to detect EMG complexity increases following warm-up.

Abstract: Theoretical and non-dimensional investigations have been performed to study the vibration control potential of approaches that can be based on viscoelastic but also on endochronic elements. The latter are known from the endochronic theory of plasticity and provide the possibility to establish rate-independent schemes for vibration control. The main question that has to be answered is: Can rate-independent damping be efficiently used to reduce mechanical vibrations? To answer this question non-dimensional models for dynamical systems are derived and analyzed numerically in time-domain as well as in frequency-domain. The results are used to compare the performance of an optimally tuned endochronic absorber to the performance of an optimally tuned dynamic absorber with viscoelastic damping. Based on a novel closed form representation for non-linear systems with endochronic elements, it has been possible to prove that rate-independent control of vibration results in an overall control profit that is close to the control profit obtained by the application of well-established approaches. It has also been found that the new concept is advantageous if anti-resonances have to be considered in broadband vibration control. Based on these novel findings, a practical realization in the context of active vibration control is proposed in which the rate-independent control law is implemented on an appropriate signal processing hardware.

This review describes the subjective experience of visual aura in migraine, outlines theoretical models of this phenomenon, and explores how these may be linked to neurochemical, electrophysiological and psychophysical differences in sensory processing that have been reported in migraine with aura. Reaction-diffusion models have been used to model the hallucinations thought to arise from cortical spreading depolarisation and depression in migraine aura. One aim of this review is to make the underlying principles of these models accessible to a general readership. Cortical spreading depolarisation and depression in these models depends on the balance of the diffusion rate between excitation and inhibition, and the occurrence of a large spike in activity to initiate spontaneous pattern formation. We review experimental evidence, including recordings of brain activity made during the aura and attack phase, self-reported triggers of migraine, and psychophysical studies of visual processing in migraine with aura, and how these might relate to mechanisms of excitability that make some people susceptible to aura. Increased cortical excitability, increased neural noise, and fluctuations in oscillatory activity across the migraine cycle are all factors likely to contribute to the occurrence of migraine aura. There remain many outstanding questions relating to the current limitations of both models and experimental evidence. Nevertheless, reaction-diffusion models, by providing an integrative theoretical framework, support the generation of testable experimental hypotheses to guide future research.

We generalize the idea of quantum clock time to quantum spacetime reference frame via physical realization of a reference system by quantum rulers and clocks. Omitting the internal degrees of freedom (such as spins) of the physical rulers and clocks, only considering their metric properties, the spacetime reference frame is described by a bosonic non-linear sigma model (NLSM). We study the quantum behavior of the system under approximations, and obtain (1) a cosmological constant valued (2/π)ρ_c0 (ρ_c0 the critical density at near current epoch) which is very close to the observations; (2) an effective Einstein-Hilbert term; (3) the ratio of variance to mean-squared of spacetime interval tends to a universal constant 2/π in the infrared region. This effect is testable by observing a linear dependence between the inherent quantum variance and mean-squared of the redshifts from cosmic distant spectral lines. The proportionality is expected to be the observed percentage of the dark energy. The equivalence principle is also generalized to the quantum level.

This paper provides a proof of concept for a linear electric generator that can be used to harvest energy from various sources of linear motion, such as vibrations, free-piston engines and wave energy. The generator can be used to power small electronic devices, such as sensors, or charge household batteries. Literature was reviewed to develop an understanding about the applications, control methods, excitation methods and mechanics of rotating and linear electric machines. A bidirectional, two-sided linear machine was designed with two stator cores and a single mover core. The stator windings and mover winding can be independently excited, allowing for three modes: no mover excitation, DC excited mover, and AC excited mover. Simulations results showed that the magnetic flux generated by DC excited stator cores were concentrated in the centre of the mover core. The use of two stator cores eliminates lateral flux in the mover core when it is not excited, minimising attraction and repulsion forces. Parametric analysis showed that flux cutting occurred in all operation modes, verifying that the generator will produce power when operating. Hardware tests produced an output current when the machine is electrically and mechanically excited, verifying the proposed design.

The Circular Economy of plastics is a promising concept that has the potential to reduce pollution and close the loop on plastic waste. However, further research is needed to develop more efficient and environmentally friendly methods of recycling plastic. This review article discusses the Circular Economy of plastics, its potential benefits and drawbacks, and the challenges that need to be addressed to make it a reality. Some case studies are also examined to explore how the Circular Economy of plastics has been implemented across the globe.

In our investigation of the time evolution of energy states Einstein’s interpretation from more than a century ago is found to have greater internal consistency than that of non-relativistic quantum mechanics. We choose to align more closely with his methods by abandoning the non-relativistic Hamiltonian method, which has been the standard for nearly a century, in favor of a relativistically correct Lagrangian method. Integral equations of motion for the absorption and emission of radiation are derived that underlie and anticipate the differentially motivated Schrödinger equation. This new interpretation applies to a large volume of experimental evidence of both classical and quantum mechanical origin. Among the examples discussed in support are Planck’s law describing black body radiation, matrix mechanics, the function of the simplest quantum mechanical system an electron cyclotron, chaos theory, and evolutionary biology.

We present a cost- and time-efficient method for the controlled preparation of single phase La(IO3)3 nanoparticles via a simple soft-chemical route which takes a matter of hours, thereby providing an alternative to the common hydrothermal method which takes days. Nanoparticles of pure α-La(IO3)3 and pure δ-La(IO3)3 were synthesised via the new method depending on the source of iodate ions, thereby demonstrating the versatility of the synthesis route. The crystal structure, nanoparticle size-dispersal and chemical composition were characterised via angle- and energy-dispersive powder X-ray diffraction, scanning electron microscopy and Fourier-transform infrared spectroscopy.

Non-intrusive load monitoring (NILM) is a core technology for demand response (DR) and energy conservation services. Traditional NILM methods are rarely combined with practical applications, and most studies aim to decompose the whole loads in a household, which leads to low identification accuracy. In this paper, an NILM approach based on multi-feature integrated classification (MFIC) is explored, which combines some non-electrical features such as ON/OFF duration, usage frequency of appliances, and usage period to improve load differentiability. The implementation of MFIC algorithm is consistent with traditional event-based method. The uniqueness of our algorithm is that it designs an event detector based on steady-state segmentation and a linear discriminant classifier group based on multi-feature global similarity. Simulation results using an open-access dataset demonstrate the effectiveness and high accuracy of MFIC algorithm, with the state-of-the-art NILM methods as benchmarks.

Regression models form the core of the discipline of econometrics. One of the basic assumptions of classical linear regression model is that the values of the explanatory variables are fixed in repeated sampling. However, in most of the real life cases, particularly in economics the assumption of fixed regressors is not always tenable. Under a non-experimental or uncontrolled environment, the dependent variable is often under the influence of explanatory variables that are stochastic in nature. There is a huge literature related to stochastic regressors in various aspects. In this paper, a historical perspective on some of the works related to stochastic regressor is being tried to pen down based on literature search.

This article puts forward the bi-matrix games with crisp parametric payoffs based on interval value function approach. We conclude that the equilibrium solution of the game model can converted into optimal solutions of the pair of the non-linear optimization problem. Finally, experiment results show the efficiency of the model.

This article develops a duality principle and a related convex dual formulation suitable for a large class of models in physics and engineering. The results are based on standard tools of functional analysis, calculus of variations and duality theory. In particular, we develop applications to a model in non-linear elasticity.

This study demonstrates a global, non-parametric, non-iterative optimization of time-mean value of a kind of index vibrated by time-varying forcing. It is based on the fact that the (steady) forced vibration of non-autonomous ordinary differential equation systems is well approximated by an analytical solution when the amplitude of forcing is sufficiently small and its base state without forcing is linearly stable and steady. It is applied to optimize a time-averaged heat-transfer rate on a two-dimensional thermal convection field in a square cavity with horizontal temperature difference, and the globally optimal way of vibrational forcing, i.e. the globally optimal, spatial distribution of vibrational heat and vorticity sources, is first obtained. The maximized vibrational thermal convection corresponds well to the state of internal gravity wave resonance. In contrast, the minimized thermal convection is weak, keeping the boundary layers on both sidewalls thick.

In this paper, we present a framework to study the spatial structure of noctilucent clouds formed by ice particles in the upper atmosphere at mid and high latitude during summer. We study noctilucent cloud activity in optical images taken from three different locations and under different atmospheric conditions. In order to identify and distinguish noctilucent cloud activity from other objects in the scene, we employ linear discriminant analysis (LDA) with feature vectors ranging from simple metrics to higher-order local autocorrelation (HLAC), and histogram of oriented gradients (HOG). Finally, we propose a Convolutional Neural Networks (CNN) based method for the detection of noctilucent clouds. The results clearly indicate that the CNN based approach outperforms LDA based methods used in this article. Furthermore, we outline suggestions for future research directions to establish a framework that can be used for synchronizing the optical observations from ground based camera systems with echoes measured with radar systems like EISCAT in order to obtain independent additional information on the ice clouds.

Phenomenon of vacuum fluctuations of virtual particles in high energy physics has been mathematically modeled by a third order differential equation. Aim of present theory is to unravel underlying mathematical equation capable of explaining microscopic phenomenon of vacuum fluctuations. Solution of such a differential equation after applying appropriate boundary conditions gives an acceptable wave function i.e. . Operation of energy and time operator on this wave function proves that these operators do not hold commutative property. Time energy uncertainty principle has been derived by calculating variance of energy and time for the same wave function.

This paper investigates reachable set estimation and state-feedback controller design for linear time-delay control system with bounded disturbances. First, by constructing an appropriate Lyapunov-Krasovskii functional, we obtained a delay-dependent condition, which determed the admissible bounding ellipsoid for the reachable set of the system we considered. Then, a sufficient condition in form of liner matrix inequalities is given to solve the problem of controller design with reachable set estimation. Finally, by minimizing the volume of the ellipsoid and solving the liner matrix inequality, we obtain the desired ellipsoid and controller gain. A comparative numerical example is given to verify the usefulness of our result.

Dormancy is a physiological state that confers winter hardiness to and orchestrates phenological phase progression in temperate perennial plants. Weather fluctuations caused by climate change increasingly disturb dormancy onset and release in many plant species including tree crops leading to aberrant growth, flowering, and fruiting. Currently, research in this field is impeded by the lack of affordable non-invasive methods for on-line monitoring of dormancy. We report on an automatic framework for low-cost, long-term, and scalable dormancy studies in deciduous plants. The proposed method is based on continuous near-field sensing of the photosynthetic activity of shoots via pulse-amplitude modulated chlorophyll fluorescence sensors connected remotely to a data processing system. The resulting high-resolution time series of JIP-test parameters indicative of the responsiveness of the photosynthetic apparatus to environmental stimuli are subjected to frequency-domain analysis. The proposed approach allows to overcome the variance coming from diurnal changes of insolation and to derive estimations on the depth of dormancy. Our approach was validated over three seasons in an experimental apple (Malus × domestica Borkh.) orchard by collating the non-invasive estimations with the results of traditional methods (growing of the cuttings obtained from the tress at different phases of dormancy) and the output of commonly used chilling requirement models. We discuss the advantages of the proposed monitoring framework such as prompt detection of freeze damages along with its potential limitations.

This paper focuses on the problem of finite-time stabilization of homogeneous, non-Lipschitz systems with dilations. A key contribution of this paper is the design of a virtual recursive Hölder, non-Lipschitz state feedback which renders the non-Lipschitz systems in the special case dominated by a lower-triangular nonlinear system, finite-time stable. The proof is based on a recursive design algorithm developed recently, to construct the virtual Hölder continuous, finite-time stabilizer as well as a C¹ positive definite and proper Lyapunov function that guarantees finite-time stability of the non-Lipschitz non-linear systems.

Scattering has been always considered a problem in most of the imaging and holography systems. In this project, a 3D imaging system has been developed based on scattering against common beliefs. The 3D imaging system consists of only two components namely a scattering lens, fabricated by grinding the surface of a convex lens using sandpaper and a web camera. The point spread function (PSF) in the form of speckle distribution was recorded using a laser source in the first step. A synthetic object was selected which was convolved with the PSF in a computer to generate the object intensity distribution. The image of the object was reconstructed by processing the PSF and object intensity distribution using a computational reconstruction method called non-linear reconstruction. The recorded PSF was scaled and the process was repeated for a different synthetic object. The concept was extended to 3D by summing the object intensity distributions generated using PSFs with different scaling factors. The image at different planes can be reconstructed using the PSFs corresponding to that plane.

One of the non-linear phenomena that affect high bandwidth and long reach communication systems is the non-linear phenomenon called four-wave mixing (FWM). Unfortunately, the simulation of such systems aiming to obtain their design parameter limitations require more time as the number of channels increases. In this paper, we propose a new high-performance computational model to obtain optimal design parameters in a multi san Dense Wavelength Division Multiplexing (DWDM) system, limited by FWM and the intrinsic Amplified Spontaneous Emission (ASE) noise of optical amplifiers employed in each segment. The simulation in this work provides a complete optical design characterization and compares the efficiency and speed improvement of the proposed parallelization model versus a previous sequential model. Additionally, an analysis of the computational complexity of parallel model is presented, where two parallel implementations are used. First, Open Multi−Processing (OpenMP), based on the use of a central, multi-core processing unit is used and secondly the Compute Unified Device Arquitecture (CUDA), which is based on the use of graphics processing unit. Results show that parallelism improves to up to 40 times the performance of the simulation when nested parallelization with CUDA is used, over de sequential method and up to 6 times compared with the implementation with OpenMP using 12 processors. Within our parallel implementation, it is possible to simulate with an increased number of channels, that was unpractical in the sequential simulation.

Night-time lights interact with human physiology through different pathways starting at the retinal layers of the eye, from the signals provided by the rods, the S-, L- and M-cones, and the intrinsically photosensitive retinal ganglion cells (ipRGC). These individual photic channels combine in complex ways to modulate important physiological processes, among them the daily entrainment of the neural master oscillator that regulates circadian rhythms. Evaluating the relative excitation of each type of photoreceptor generally requires full knowledge of the spectral power distribution of the incoming light, information that is not easily available in many practical applications. One such instance is wide area sensing of public outdoor lighting; present-day radiometers onboard Earth-orbiting platforms with sufficient nighttime sensitivity are generally panchromatic and lack the required spectral discrimination capacity. In this paper we show that RGB imagery acquired with off-the-shelf digital single-lens reflex cameras (DSLR) can be a useful tool to evaluate, with reasonable accuracy and high angular resolution, the photoreceptoral inputs associated with a wide range of lamp technologies. The method is based on linear regressions of these inputs against optimum combinations of the associated R, G, and B signals, built for a large set of artificial light sources by means of synthetic photometry. Given the widespread use of RGB imaging devices, this approach is expected to facilitate the monitoring of the physiological effects of light pollution, from ground and space alike, using standard imaging technology.

The purpose of this study is to ascertain whether implementation difficulty can be used in slot allocation model as a new mechanism for slightly weakening grandfather right. According to which, a linear integer programming model is designed to compare and analyze displacement, implementation difficulty and priority with different weights. Test results show that the implementation difficulty can be significantly reduced without causing excessive displacement and disruption of existing priorities, by weight setting while declared capacity is cleared. In addition to this, whether the movements are listed in order of descending priority or not have great impact on displacement and implementation difficulty within slot allocation model. Capacity is surely a key factor affecting displacement and implementation difficulties. This study contributes to propose a new mechanism for slightly weakening grandfather right, which can help decision makers to upgrade slot allocation policies.

From the linear Nash-Green fluctuations of background metric, we present the perturbation equations in an embedded four space-time. In the context of a five-dimensional bulk, we show that the perturbations are only propagated by the gravitational tensorial field equation. In a Newtonian conformal gauge, we study the matter density evolution in sub-horizon regime and on how such scale may be affected by the extrinsic curvature. We use the "extended Gold 2018'' growth dataset with 25 datapoints and the best fit Planck2018/LambdaCDM parameters. Hence, we determine the evolution equation for the density growth delta(a) as a result from the embedded equations of the background geometry. By using solar constraints, we analyse the evolution of the effective Newtonian constant G_eff and showing that applying Taylor expansion to G_eff (a) under the constraint of time-derivative of G_eff(0)=G at a= 1 in matter domination era, we get an agreement with Big Bang Nucleosynthesis (BBN) and also an alleviation of the 3-sigma tension to 1-sigma contour between (sigma8-Omega_m) of the observations from Cosmic Microwave Background (CMB) and Large Scale Structure (LSS) probes.

Amaranth has the potential to support Malawi's food and nutrition security, income generation and livelihoods, and climate change resilience efforts. Due to the high genetic variability of Ama-ranth, there is a need to develop stable and high-yielding genotypes for sustainable production. To determine the degree of genetic stability in different environments, five Amaranth accessions were subjected to stability analysis. The experiment was carried out at three sites (Bunda, Bembeke, and Chipoka) for two seasons in 2020-2021 in the central region of Malawi. It was laid out in Ran-domized Complete Block Design (RCBD) with four replicates. Eberhart and Russell linear regres-sion model was used for stability analysis and Pearson correlation was used to test the relationship between variables. Environmental variance + (genotype x environment) was significant for four of the parameters studied, namely grain yield, plant height, leaf length, and leaf width, indicating the presence of a remarkable interaction between genotypes and environment. The results of a pooled analysis of variance showed significant differences at a 5% significance level among the Amaranth accessions, indicating inherent genetic variability. Using the linear regression model of Eberhart and Russell, accessions PE-LO-BH -01 and LL-BH -04 were identified as the highest yielding stable genotypes for leaf and grain yield, respectively. In addition, Bembeke site was the most favourable environment for all the accessions. Thus, to enhance the production of amaranth in Malawi, LL-BH-04 and PE-LO-BH-01 were put forward for release as varieties for grain and leaf respectively. These results will also guide and support for future breeding programs.

All the arguments of a wavefunction are defined at the same instant implying a notion of simultaneity. In a somewhat related matter, certain phenomena in quantum mechanics seem to have non-local causal relations. Both concepts are in contradiction with special relativity. We propose to define the wavefunction with respect to the invariant proper time of special relativity instead of standard time. Moreover, we shall adopt the original idea of Schrodinger suggesting that the wavefunction represents an ontological cloud-like object that we shall call ‘individual fabric’ that has a finite density amplitude vanishing at infinity. Consequently, measurement can be assimilated to a confining potential that triggers an inherent non-local mechanism within the individual fabric. It is formalised by multiplying the wavefunction with a localising gaussian as in the GRW theory but in a deterministic manner.

To verify the reliability of the proposed stitching linear scan method for roundness measurement of small cylindrical workpieces, measurement uncertainties of the workpieces with various dimension are conducted. The cross-sectional circle of a cylindrical workpiece is divided into several equal arcs to be measured. Thus, the arc profile can be characterized according to the measured arcs. The roundness profile of the cylindrical part can be obtained by stitching these arc profiles together. Firstly, the measurement uncertainty of the workpiece with a diameter 1.5 mm and length 5.8 mm is evaluated to be 0.095 μm which can meet the uncertainty target of 0.1 μm. Considering the uncertainty of θx and θz which are the alignment around X-axis and Z-axis respectively changing with workpiece dimension changing, relevant uncertainties are carried out. As a result, there is no limitation with respect to workpiece diameter theoretically If the alignment can reach θz = θx = ±0.1° without considering the measurable range of the machine.

Initial periods of adsorption kinetics play an important role in estimating the initial adsorption rate and rate constant of adsorption process. Several adsorption processes rapidly occur, and the experimental data of adsorption kinetics under the initial periods can contain potential errors. The pseudo-second-order (PSO) kinetic model has been popularly applied in the field of adsorption. The use of the nonlinear optimization method to obtain the parameters of the PSO model can minimize error functions during modelling compared to the linear method. However, the nonlinear method has limitations in that it cannot directly recognize potential errors in the experimental points of time-dependent adsorption, especially under the initial periods. In this study, for the first time, the different linear types (Types 1–6) of the PSO model are applied to discover the error points under the initial periods. The result indicated that the fitting method using its linear equations (Types 2–5) is really helpful for identifying the error (doubtful) experimental points from the initial periods of adsorption kinetics. The imprecise points lead to low adjusted R2 (adj-R2), high reduced χ2 (red-χ2), and high Bayesian information criterion (BIC) values. After removing those points, the experimental data were adequately fitted with the PSO model. statistical analyses demonstrated that the nonlinear method must be used for modelling the PSO model because its red-χ2 and BIC were lower than the linear method. Type 1 has been extensively applied in the literature because of its very high adj-R2 (0.9999) and its excellent fitting to experimental points. However, its application should be limited because the potential errors from experimental points were not identified by this type. For comparison, the other kinetic models (i.e., pseudo-first-order, pseudo-nth-order, Avrami, and Elovich) are applied. The modelling result using the nonlinear forms of those models indicated that the fault experimental points from the initial periods were not detected.

Commuting is a vital travel channel for college students throughout their higher education career; nevertheless, excessive commute time negatively impacts students’ school satisfaction, academic achievement, health, and quality of life. Meanwhile, few studies have explored students’ commute time, covering a large population and scope. Therefore, this study analyzes the dwelling type that influences college and graduate students’ school commute times in the Seoul Metropolitan Area, using data from the 2016 Household Travel Diary Survey. This study uses spatial data on housing development to classify five dwelling types (i.e., new town, housing site development, Seoul, Incheon, and Gyeonggi-do). A multiple linear regression model empirically analyses students’ household and personal characteristics. The results reveal that dwelling type significantly affects students’ commute time. Specifically, Students living in Seoul have a shorter commute to school than those living in new towns. Socioeconomic characteristics have less effect on college and graduate students' school commute time. This study discusses the problem of excessive commuting of college and graduate students in new towns.

The paper deals with one new property of the linear time-optimal control problems with real eigenvalues of the system, no matter of the number of eigenvalue multiplicity. This property unveils a prospective of synthesizing the time-optimal control without the need of describing the switching hyper-surfaces. The already chrestomathy example of the time-optimal control of a double integrator is resolved by the new technique and compared with the classical synthesis.

The quantile estimation of extreme wind speed is needed in various environmental fields such as climatology, design of structures, renewable energy sources and agricultural operations. These calculations are crucial for the coding of wind speed. In this study, the required wind speed series of 16 stations in Khyber Pakhtunkhwa, Pakistan, was obtained from the NASA official website and measured in meters per second (m/s) at a 10-meter distance. A Regional Frequency Analysis of 16 AMWS stations was performed using L-moments. The quantile estimates of extreme wind speed are needed for various areas of interest using Regional Frequency Analysis (RFA) and extreme value theory. These calculations are crucial for the coding of wind speed. The data was taken from the NASA official website at a 10-meter distance and measured in meter per second (m/s). A Regional Frequency Analysis of AMWS using L-moments is performed utilizing wind speed data from sixteen sites (16) in Pakistan's Khyber Pakhtunkhwa province. There are no sites that are found to be discordant. The wards method is used to construct a homogenous region and make two homogenous regions from 16 sites. The heterogeneity test justifies that both clusters are homogeneous. The most appropriate probability distribution from the Generalized Normal (GNO), Generalized Logistic (GLO), Pearson Type-3 (P3), Generalized Pareto (GPA), and Generalized Extreme Value (GEV) distributions are chosen to calculate regional quantiles. According to the L-moments diagram and Z statistics, GEV for Cluster- Ι and GLO for Cluster- ΙΙ are the best suggestions from the others. Both clusters’ robustness is measured utilizing Relative Bias (RB) and Relative Root Mean Square Error (RRMSE). Overall, GEV distribution is fit for cluster-Ι, and the GLO distribution is fit for cluster-ΙΙ. Utilizing the site mean and median as index parameters, we can also find at-site quantiles from regional quantiles. The study’s quantile estimates can be employed in codified structural designs with policy consequences.

Non-orthogonal multiple access (NOMA) has been investigated to support massive connectivity for Internet-of-things (IoT) networks. However, since most IoT devices suffer from limited power and decoding capabilities, it is not desirable to pair a large number of devices simultaneously, which encourages two-user NOMA grouping. Additionally, most existing techniques have not considered the diversity in the target QoS of IoT devices, which may lead to spectrum inefficiency. Few investigations have partially considered that issue by using an order-based power allocation (OPA) approach, where the power is allocated according to the order to the user's target throughput within a priority-based NOMA (PNOMA) group. However, this does not fully capture the effects of diversity in the values of the users' target throughputs. In this work, we handle both problems by considering a throughput-based power allocation (TPA) approach, that captures the QoS diversity, within a three-users PNOMA group as a compromise between spectral efficiency and complexity. Specifically, we investigate the performance of a time-division PNOMA (TD-PNOMA) scheme, where the transmission time is divided into two-time slots with two-users per PNOMA group. The performance of such TD-PNOMA is compared with a fully PNOMA (F-PNOMA) scheme, where the three users share the whole transmission time, in terms of the ergodic capacity under imperfect successive interference cancellation (SIC). The results reveal the superiority of TPA compared with OPA approach in both schemes, besides that the throughput of both schemes can outperform each other under imperfect SIC based on the transmit signal-to-noise ratio and the deployment scenarios.

Outliers can influence regression model parameters and change the direction of the estimated effect, over-estimating or under-estimating the strength of the association between a response variable and an exposure of interest. Identifying visit-level outliers from longitudinal data with continuous time-dependent covariates is important especially when the distribution of such variable is highly skewed at follow-up visits. The primary objective was to identify potential outliers at follow-up visits using interquartile range (IQR) statistic, motivated by a large TEDDY dietary longitudinal and time-to-event data with a continuous time varying vitamin B12 intake as the exposure of interest and time to developing Islet Autoimmunity (IA) as the response variable. The IQR method was also applied to simulated data. To assess the impact of IQR-method detected outliers, data was analyzed using Cox-proportional hazard model with robust sandwich estimator. Partial residual diagnostic plots were used to detect highly influential outliers. Results showed how some of the detected outliers had large influence on the Cox regression model and changed both the direction of hazard ratios and the strength of association with the risk of developing IA. In conclusion, the IQR method is useful in identifying potential outliers at visit-level which can be further investigated.

Linear-width is a well-regarded width parameter in graph theory. The constructs of linear loose tangle and linear tangle present obstacles to attaining linear-width. In this succinct paper, our primary focus will be the exploration of maximal linear loose tangles.

The splitting method developed in a previous study for linear, multi – component, convection-diffusion mass transfer equations is extended to non-linear, multi-component, convection-diffusion mass transfer equations. The diffusion term is non-linear (the diffusion coefficients depend on chemical species concentrations). Theoretical results about the splitting error are presented, as well as numerical simulations for mixtures with n ≤ 5. The numerical experiments show second-order accuracy and stability for the present splitting algorithm.

Regression models are mostly used in all fields of sciences for modelling the relationship between a dependent variable and independent variable(s). The least square method is often used to estimate the parameters in a linear model because it is the best linear unbiased estimator. These estimates can only be reliable if the assumption of normality is satisfied. In some cases the dependent variable might be bimodal and shows a non-linear relationship with the independent variable(s). In this case, a non-linear model should be used. In non-linear model, the standard errors are often obtained by linearizing the nonlinear function around the parameter, assuming central limit theorem. After the linearization, the least square parameter estimates are obtained. It should be noted that the error of the non-linear model is different from that of the transformed linear model. Thus, there is a need to transform back to the original non-linear model. In this note, a novel non-linear function was developed into a non-linear regression model, called Normal-Power model. The least square method was used to estimate the parameter of the transformed model. Its usefulness in regression model was demonstrated using real data of Nigeria Economy-Tourism model.

Complex diseases such as cancer are caused by changes in the Gene Regulatory Networks. Systems that model the complex dynamics of these networks along with adapting to real gene expression data are closer to reality and can help understand the creation and treatment of cancer. In this paper, for the first time, modelling of gene regulatory networks is performed using delayed nonlinear variable order fractional systems in the state space by a new tool called GENAVOS. This tool uses gene expression time series data to identify and optimize system parameters. This software has several tools for analyzing system dynamics. The results show that the nonlinear variable order fractional systems have very good flexibility in adapting to real data. We found that regulatory networks in cancer cells actually have a larger delay parameter than in normal cells. It is also possible to create chaos, periodic and quasi-periodic oscillations by changing the delay, degradation and synthesis rates. Our findings indicate a profound effect of time-varying order on these networks, which may be related to a type of cellular memory due to epigenetic and environmental factors. We showed that by changing the delay parameter and the variable order function for a normal cell system, its behavior changes and becomes quite similar to the behavior of a cancer cell. This work also confirms the effective role of the miR-17-92 cluster in the cancer cell cycle. GENAVOS is available at https://github.com/hanif-y/GENAVOS with its user guide and MATLAB codes.

In this paper, we are interested in a model of exact asymptotically flat charged hairy black holes in the background of dilaton potential. We study the weak gravitational lensing in the spacetime of hairy black hole in Einstein-Maxwell theory with a non-minimally coupled dilaton and its non-trivial potential. In doing so, we use the optical geometry of the flat charged hairy black hole for some range of parameter $\gamma$. For this purpose, by using Gauss-Bonnet theorem, we obtain the deflection angle of photon in a spherically symmetric and asymptotically flat spacetime. Moreover, we also investigate the impact of plasma medium on weak gravitational lensing by asymptotically flat charged hairy black hole with a dilaton potential. Our analytically analyses show the effect of the hair on the deflection angle in weak field limits.

In this paper, we proposed a new model of non-linear electrodynamics with parameter. Firstly, we study the weak limit approximation and by using the Gauss Bonnet theorem, we obtain the deflection angle of photon from magnetized black hole and effect of bnon-linear electrodynamics. In doing so, we find the corresponding optical metric after that we calculate the Gaussian curvature which is used in Gauss Bonnet theorem. Then we show the deflection angle in the leading order terms. We also analyzed that our results reduces into Maxwell's electrodynamics and RN solution with the reduction of parameters. Moreover, we also investigate the graphical behavior of deflection angle w.r.t correction parameter, black hole charge and impact parameter.

This paper is aimed at studying the temporal evolution of the surface displacements occurred over the past few years in the ocean-reclaimed platforms of the Shanghai megacity (China), which are mainly ascribable to consolidation processes of large dredger fills and alluvial deposits. With respect to previous analyses carried out over the same area, this work provides a joint multi-platform differential interferometry synthetic aperture radar (DInSAR) analysis, based on the application of the advanced Small BAseline Subset (SBAS) algorithm. This led us to retrieve long-term deformation time-series that are helpful for a better understanding of the on-going deformation phenomena. To this aim, we have exploited two sequences of SAR data collected by the ASAR/ENVISAT and by the COSMO-SkyMed (CSK) sensors, respectively, spanning the whole time period from 2007 to 2016. Unfortunately, the large time gap (of about three years) existing between the available ASAR/ENVISAT and CSK datasets gave rise to additional difficulties for their combination. Nevertheless, this problem has been faced by benefiting from the knowledge of a time-dependent model describing the temporal evolution of the expected deformations affecting the Shanghai ocean-reclaimed platforms.

Many systems in nature and laboratories are far from equilibrium and exhibit significant fluc- tuations, invalidating the key assumptions of small fluctuations and short memory time in or near equilibrium. A full knowledge of Probability Distribution Functions (PDFs), especially time- dependent PDFs, becomes essential in understanding far-from-equilibrium processes. We consider a stochastic logistic model with multiplicative noise, which has gamma distributions as stationary PDFs. We numerically solve the transient relaxation problem, and show that as the strength of the stochastic noise increases the time-dependent PDFs increasingly deviate from gamma distributions. For sufficiently strong noise a transition occurs whereby the PDF never reaches a stationary state, but instead forms a peak that becomes ever more narrowly concentrated at the origin. The addition of an arbitrarily small amount of additive noise regularizes these solutions, and re-establishes the existence of stationary solutions. In addition to diagnostic quantities such as mean value, standard deviation, skewness and kurtosis, the transitions between different solutions are analyzed in terms of entropy and information length, the total number of statistically distinguishable states that a system passes through in time.

This article presents and discusses analytical data on the scientific publication record from 1910 to 2020 on two topics: "climate" and "climate change/global warming/climate emergency". The goal is to visualize how the publication record on these two topics has evolved over time, from different classification perspectives (year, country, source and organization). Three hypotheses are tested using data collected from Web of Science and various graphical representations of the data. It is found that research output related to the Earth’s contemporary changing climate overtook that of general climate research in 2011, and the publication ratio has been expanding in the last decade. There are significant differences in the publication countries and sources between the two topics, and conversely less significant differences in terms of organizations publishing these works. Differentiation factors that affect the level of research output and engagement on the climate challenge include: island versus landlocked nations, specialized versus general scientific journals, academic versus institutional organizations. The future of the publication records is discussed, such as the emergence of new terms to refer to the climate challenge, such as “climate emergency”.

We have implemented quantum modeling mainly based on Bohmian Mechanics to study time series that contain strong coupling between their events. Compared to time series with normal densities, such time series are associated with rare events. Hence, employing Gaussian statistics drastically underestimates the occurrence of their rare events. The central objective of this study is to investigate the effects of rare events in the probability densities of time series from the point of view of quantum measurements. For this purpose, we first model the non-Gaussian behavior of time series using the multifractal random walk (MRW) approach. Then, we examine the role of the key parameter of MRW, λ, which controls the degree of non-Gaussianity, in quantum potentials derived for time series. Our Bohmian quantum analysis shows that the derived potential takes some negative values in high frequencies (its mean values), then substantially increases, and the value drops again for rare events. Thus, rare events can generate a potential barrier in the high-frequency region of the quantum potential, and the effect of such a barrier becomes prominent when the system transverses it. Finally, as an example of applying quantum potential beyond the microscopic world, we compute quantum potentials for the S&P financial market time series to verify the presence of rare events in the non-Gaussian densities and demonstrate deviation from the Gaussian case.

This paper presents a mathematical modeling approach utilizing a fuzzy modeling framework for fixed wing aircraft systems with the goal of creating a highly desirable mathematical representation for model-based control design applications. The starting point is a mathematical model comprised of fifteen non-linear ordinary differential equations representing the dynamic and kinematic behavior applicable to a wide range of fixed wing aircraft systems. Here the proposed mathematical modeling framework is applied to the AIRBUS A310 model developed by ONERA. The proposed fuzzy modeling framework takes advantage of sector non-linearity techniquesto recast all the non-linear terms from the original model to a set of combined fuzzy rules. The result of this fuzzification is a more suitable mathematical description from the control system design point of view. Therefore, the combination of this fuzzy model and the wide range of control techniques available in the literature for such kind of models will enable us to avoid common control design methods, such as gain scheduling, where stability issues can be extremely challenging.

The overrun of transient power quality index caused by the large-capacity electric arc furnace (EAF) has become a prominent problem affecting the safe and stable operation of the power system. (1) In this paper, the relationship between arc furnace volt-age and current is derived based on the different stages of arc combustion, and the random variation of chaotic phenomenon of the arc voltage are simulated. Established an EAF model suitable for the study of transient power quality problems. (2) Take 50t AC EAF as an example to analyze the reactive power impact and the influence on the point of common coupling (PCC) voltage caused by the three-phase short circuit of the electrode. The results show that the experimental results are consistent with the theoretical analysis, verifying the correctness and effectiveness of the model. (3) When the three-phase short-circuit occurs, the reactive power impact is nearly 6 times that of normal operation, the short-circuit current is 2.66 times that of normal operation, and the effective value of the PCC voltage has dropped by 40.37%, which provides a theoretical basis for real-time compensation of impulsive reactive power and improvement of the transient power quality of the EAF.

In this paper, we present an extended version of the Hadi-Vencheh model for multiple criteria ABC inventory classification. The proposed model is a nonlinear weighted product model (WPM) which determines a common set of weights for all the items. Our proposed nonlinear WPM incorporates multiple criteria with different measure units, without converting the performance of each inventory item in terms of each criterion into a normalized attribute value, thereby providing an improvement over the model proposed by Hadi-Vencheh. Our study mainly includes various criteria for ABC classification, and demonstrates an efficient algorithm for solving nonlinear programming problems in which the feasible solution set does not have to be convex. The algorithm presented in this study improves the solution efficiency of the Canonical Coordinates Method (CCM) algorithm substantially when applied to large scale, nonlinear programming problems. The modified algorithm was tested to compare our proposed model results to the results derived using the Hadi-Vencheh model and demonstrate the algorithm's efficacy. The practical implications of the study are to develop an efficient nonlinear optimization solver by optimizing the quality of existing solutions, thus improving time and space efficiency.

A rigorous model for the electron is presented by generalizing the Coulomb's Law or Gauss's Law of electrostatics, using a unified theory of electricity and gravity. The permittivity of the free-space is allowed to be variable, dependent on the energy density associated with the electric field at a given location, employing generalized concepts of gravity and mass/energy density. The electric field becomes a non-linear function of the source charge, where concept of the energy density needs to be properly defined. Stable solutions are derived for a spherically symmetric, surface-charge distribution of an elementary charge. This is implemented by assuming that the gravitational field and its equivalent permittivity function is proportional to the energy density, as a simple first-order approximation, with the constant of proportionality referred to as the Unifield Electro-Gravity (UEG) constant. The stable solution with the lowest mass/energy is assumed to represent a ``static'' electron without any spin. Further, assuming that the mass/energy of a static electron is half of the total mass/energy of an electron including its spin contribution, the required UEG constant is estimated. More fundamentally, the lowest stable mass of a static elementary charged particle, its associated classical radius, and the UEG constant are related to each other by a dimensionless constant, independent of any specific value of the charge or mass of the particle. This dimensionless constant is numerologically found to be closely related to the the fine structure constant. This possible origin of the fine structure constant is further strengthened by applying the proposed theory to successfully model the Casimir effect, from which approximately the same above relationship between the UEG constant, electron's mass and classical radius, and the fine structure constant, emerges.

In order to overcome this problem our group designed a novel machine learning technique, multivariate linear method (MLM) which can capture convergent data from voxel-based morphometry, functional resting state and task-related neuroimaging and the relevant clinical measures. In this paper we report results from convergent cross-validation of biological signatures of disease in a sample of patients with schizophrenia as compared to depression. Our model provides evidence that the combination of the neuroimaging and clinical data in MLM analysis can inform the differential diagnosis in terms of incremental validity to reach 90 % accuracy of the prediction.

In this paper we analyze and propose new method and algorithm of selecting the optimal labor time as a function of skills following our main references Mirrlees (1971), Saez (2001) and Stancheva (2014). The optimal labor time is a situation when the utility function of individual reaches a maximum. One of the main differences with Saez (2001) is our algorithm for creation the skill distribution

In this work, we investigate the weak deflection angle of light from exact black hole within the non-linear electrodynamics. First we calculate the Gaussian optical curvature using the optical spacetime geometry. With the help of modern geometrical way popularized by Gibbons and Werner, we examine the deflection angle of light from exact black hole. For this desire, we determine the optical Gaussian curvature and execute the Gauss-Bonnet theorem on optical metric and calculate the leading terms of deflection angle in the weak limit approximation. Furthermore, we likewise study the plasma medium's effect on weak gravitational lensing by exact black hole. Hence we expose the effect of the non-linear electrodynamics on the deflection angle in the weak gravitational field.

In this article, we analyze the weak gravitational lensing in the context of Einstein-non-linear Maxwell-Yukawa black hole. To this desire, we derive the deflection angle of light by Einstein-non-linear Maxwell-Yukawa black hole using the Gibbons and Werner method. For this purpose, we obtain the Gaussian optical curvature and implement the Gauss-Bonnet theorem to investigate the deflection angle of Einstein-non-linear Maxwell-Yukawa black hole. Moreover, we derive the deflection angle of light in the presence of plasma medium. We also analyze the graphical behavior of deflection angle by Einstein-non-linear Maxwell-Yukawa black hole in the presence of plasma as well as non-plasma medium.

The present article addresses the long-standing problem of the polymer brush bilayers under stationary shear flow at non-linear response regime where the system gets a non-Newtonian fluid. The main idea behind this research would be the fact that the immense lubricity of the polymer brush bilayers originates from a global restructuring that takes place at large shear rates. It is shown here that physical quantities like, stress tensor, viscosity tensor, the friction coefficient and the chain extensions could become dependent on the shear rate at non-Newtonian regime. Apparently, the sub-linear scaling of the physical quantities at large shear rates is solely due to the fact that the chains stretch in the shear direction.

The aim of this work was to determine if the development of low-cost or no-cost finite element analysis (FEA) software has advanced to the point where it can be used in place of trusted commercial FEA packages for linear static structural analyses using isotropic material models. Nonlinear structural analysis will be covered in a separate paper. Several suitable packages were identified, these underwent a process of systematic elimination when they were unable to meet the minimum imposed qualitative criteria. Three packages were chosen to be subjected to performance benchmarking, namely: Code_Aster/Salome Meca; Mecway and Z88 Aurora. SimScale, a browser-based analysis package was included as well because it met all the baseline criteria and has the potential to offer a completely cloud-based approach to computer aided engineering, potentially reshaping the way an engineering business views its operational capabilities. This paper presents the test cases and simulation results for packages that fall under the linear static structural analysis type.

This paper is a slightly modified, abridged version of a previous work ``Parametric Gevrey asymptotics in two complex time variables through truncated Laplace transforms'' motivated by our contribution in the conference ``Formal and Analytic Solutions of Diff. (differential, partial differential, difference, q-difference, q-difference-differential) Equations on the Internet'' (FASnet20). It aims to clarify and give further detail at some crucial points concerning the asymptotic behavior of the solutions of the problems studied in that work.

This paper is a slightly modified, abridged version of a previous work "Parametric Gevrey asymptotics in two complex time variables through truncated Laplace transforms'' motivated by our contribution in the conference "Formal and Analytic Solutions of Diff. (differential, partial differential, difference, q-difference, q-difference-differential) Equations on the Internet'' (FASnet20). It aims to clarify and give further detail at some crucial points concerning the asymptotic behavior of the solutions of the problems studied in that work.

Data regarding the pandemic's impact on tilapia culture remain limited, but it is known that there was a significant decline in production and marketing since 2020. The post-pandemic challenges confronting tilapia farming necessitate prompt solutions, encompassing the management of bacterial infections and the adoption of more advanced technologies by small-scale producers in developing nations. Probiotics, acknowledged as a viable alternative, are presently extensively employed in tilapia aquaculture. Multiple studies have suggested that the application of diverse probiotics in tilapia culture has yielded favorable outcomes. Nonetheless, only a limited number of studies have employed statistical methods to evaluate such findings. To address this gap, a regression analysis was carried out to investigate the existence of a linear relationship between the probiotic dosage added to the feed and two key dependent variables: the specific growth rate (SGR) and the feed conversion ratio (FCR). Additionally, a hierarchical regression analysis was undertaken to ascertain the extent to which the variance observed in these responses could be explained by the variable "probiotic dosage in feed," after accounting for covariates such as initial weight, test duration, water temperature, and number of replicate tanks. Finally, two Pearson correlation matrices were constructed since different studies were included for the SGR and FCR analyses.

Mycobacterium avium ssp paratuberculosis (MAP) is the causative agent of Johne’s disease (JD) in animals and a suspected cause of Crohn’s disease (CD) in humans. Crohn’s Disease is a progressive, detrimental granulomatous enteritis of which common therapies are targeted to suppressing certain components of the immune system. The efficacy of these treatments can be variable and temporary with no clear process of selection for the individual patient. However, diagnosis of MAP has been elusive in patients with Crohn’s Disease. In animals it can be detected by several different techniques, including bacterial cell culture, polymerase chain reaction (PCR), and immunological targets. To move to an understanding of the possible pathogenicity of MAP and the sup-posed cause of CD in humans, it is necessary to demonstrate the presence of cell wall deficient mycobacterial (CWDM) forms of MAP in blood and tissue cultures from patients with CD. From this, more tailored and accurate therapies can be implemented and be developed to eradicate this infectious organism from humans. Current anti-mycobacterial antibiotics have limited efficacy as MAP is subtly different from tuberculosis. Newer methods, such as vaccination and gut microbiome remediation will be essential as part of combination therapies.

A small phylogenetically conserved sequence of 11,231 bp termed FAM247 is repeated in human chromosome 22 by segmental duplications. This sequence forms part of diverse genes that span evolutionary time, the protein genes being the earliest as they are present in zebrafish and/or mice genomes, the long non-coding RNA genes and pseudogenes the most recent as they appear to be present only in the human genome. We propose that the conserved sequence provides a nucleation site for new gene development at evolutionary conserved chromosomal loci where the FAM247 sequences reside. The FAM247 sequence also carries information in its open reading frames that provides protein exon amino acid sequences; one exon plays an integral role in immune system regulation, specifically, the function of ubiquitin specific protease (USP18) in the regulation of interferon. An analysis of this multifaceted sequence and the genesis of genes that contain it are presented.

The presence of escaped fish in aquaculture facilities as a result of harsh meteorological conditions (more pressing in a face of climate change) requires a better understanding of these dynamical behaviour through vigilant monitoring and validated numerical models. In this context, data from strain, stress sensors as well as meteorological and current sensors installed at an aquaculture farm in the Region of Murcia (Spain) were collected, processed and analysed. Among them, first results about the relationship between load and currents sensors are presented. Due to the complexity of the time series, various analyses were conducted to examine their interrelation, encompassing regression analysis of raw data and data segmented into different time intervals. Through this analysis, it was observed that employing distinct time windows better elucidated the data variability. Furthermore, an optimal data window of 240 data was identified, demonstrating significantly improved explanatory power, with the coefficient of determination (R2) increasing by approximately 0.8 depending on the section. This pave the way for optimizing the monitoring features that must be carried out to relate cause-and-effect variables in the behaviour of these off-shore infrastructures.

To obtain an accurate and reproducible experimental results in microbial fuel cell (MFC), it is important to know ‘anode maturation biofilm’ to produce a stable and maximum performance. For this purpose, four single chamber MFCs were tested in this study. The linear sweep voltammetry (LSV) polarization tests illustrated that maximum power densities of three MFCs became stable after 9 weeks. Although there were variations afterwards, such variations were negligible. Average maximum power densities from the 9th to the 17th week were 2,990 mW/m2 (MFC-4), 2,983 mW/m2 (MFC-2), 2,368 mW/m2 (MFC-3) and 837 mW/m2 (MFC-1). Polarization resistance shows that MFC-1 had much larger anode resistance (36.6-85.4 Ω) than the other MFCs (1.7-11.6 Ω). Anodic cyclic voltammetry (CV) shows that current production increased over time and MFC-1 had much smaller current production (24.4 mA) than the other MFCs (31.0-34.9 mA) at 17th week. The increased current production indicates anode biofilm became more mature over time, but overall cell performance did not increased accordingly. Possibly due to the bad inoculation, MFC-1 showed the lowest performance. However, its performance was restored to the initial performance and anode resistance was reduced by 47% at 17th week. This study shows that the optimum anode maturation time is 9 weeks and that bioanode performance is a key factor for MFC performance. This study also shows than LSV polarization and CV tests are accurate and non-destructive measurement methods for diagnosing anode performance.

The design of thin-walled structures is commonly based on the solutions of linear boundary-valued problems, formulated within well-developed theories for elastic plates and shells. However, in modern appliances, especially in MEMS design, it is necessary to take into account non-linear mechanical effects that become decisive for flexible elements. Among substantial non-linear effects, that significantly change the deformation properties of thin plates, are the effects of residual stresses caused by incompatibility of deformations, which inevitably arise during the manufacture of ultra-thin elements. The development of new methods of mathematical modeling of residual stresses and incompatible finite deformations in plates is the subject of the paper. To this end the local unloading hypothesis is used. It makes possible to define smooth fields of local deformations (inverse implant field) for the mathematical formalization of incompatibility. The main outcomes are field equations, natural boundary conditions and conservation laws, derived from least action principle and variational symmetries with account of implant field. The derivations were carried out in the framework of elasticity theory for simple materials and, over and above, within the Cosserat’s theory of a two-dimensional continuum. As illustrative examples the distributions of incompatible deformations in a circular plate are considered.

The purpose of this study is to apply the convergence-confinement method (CCM) based on the assumption of hydrostatic stress to the surrounding rock excavated in a circular tunnel whose rock mass characteristics meet the requirements of the non-linear Hoek-Brown failure criterion. Based on a consistent and rigorous method of theoretical analysis, a closed-form analytical solution for the stress/displacement of the ground reaction induced by the advancing excavation of the tunnel, especially in the elastic and plastic regions, is derived and investigated under the condition of an isotropic stress state. By taking the value of a confinement loss as an explicit analysis process in an incremental manner, not only is the computationally executable analytical solution achieved, but it can also be performed using a simple spreadsheet. The validity of the analytical solution implemented by the incremental procedure was examined with published data to study the effect of nonlinear failure criteria on the ground reaction curve; in particular the mechanical behavior at the intrados of the tunnel, and the distribution of stress/displacement on the cross-section of the tunnel. A comparison between the published results and the solution proposed in this study, which interprets the closed-form by the incremental procedure, shows consistent and favorable trends.

Non-normal mode stability analysis has long been employed to study linear transient characteristics of wall bounded shear flows. However, the application of this approach to investigate shear flows with stratified thermal conditions (STCF) has received limited attention. This paper examines thermal effects on Taylor-Couette flow. The results in this study indicate the possibility of a subcritical bifurcation in stratified Taylor-Couette flow.

Soil texture is key information in agriculture for improving soil knowledge and crop performance, so the accurate mapping of this crucial feature is imperative for rationally planning cultivations and for targeting interventions. We studied the relationship between radioelements and soil texture in the Mezzano Lowland (Italy), a 189 km² agricultural plain investigated through a dedicated airborne gamma-ray spectroscopy survey. The K and Th abundances were used to retrieve the clay and sand content by means of a multi-approach method. Linear (simple and multiple) and non-linear (machine learning algorithms with deep neural networks) predictive models were trained and tested adopting a 1:50,000 scale soil texture map. The comparison of these approaches highlighted that the non-linear model introduces significant improvements in the prediction of soil texture fractions. The predicted maps of the clay and of the sand content were compared with the regional soil maps. Although the macro-structures were equally present, the airborne gamma-ray data permits us shedding light on finer features. Map areas with higher clay content were coincident with paleo-channels crossing the Mezzano Lowland in Etruscan and Roman periods, confirmed by the hydrographic setting of historical maps and by the geo-morphological features of the study area.

In the framework of 2D circular membrane Micro-Electric-Mechanical-Systems (MEMS), a new non-linear second-order differential model with singularity in the steady-state case is presented in this paper. In particular, starting from the fact that the electric field magnitude is locally proportional to the curvature of the membrane, the problem is formalized in terms of the mean curvature. Then, a result of existence of at least one solution is achieved. Finally, two different approaches prove that the uniqueness of the solutions is not ensured.

For a nonzero normed linear space X‎, ‎we will define some different classes of fuzzy norms on X generated by linear and bounded linear functionals‎. ‎Also separate continuity of the elements of each class are investigated‎. ‎The aim of this research is to introduce a source of examples and counterexamples in the field of fuzzy normed spaces‎.

This paper investigated reliability modeling for systems subject to dependent competing risks considering that the variation of failure threshold is not considered in most studies on competing failure reliability. Firstly, the variation of degradation quantity under shocks was analyzed, and the variation of threshold was considered on this basis. Secondly, the cumulative degradation under the influence of the random shock process was analyzed. The attractive property of copula is symmetry. Then, A linear Wiener process model is applied to model performance degradation failure, and a multi-performance-degradation correlated-competition model based on a Copula function is constructed, which considers the correlated competition between multiperformance degradation failures. Lastly, the micromotor system is used to analyze the applicability of the proposed model for bivariate instances. demonstrating the rationality and effectiveness of the proposed model.

In this paper, a complete tool for real-time detection of atypical energy behaviors of airplanes is presented. The methodology extends in real time an existing offline process using Dubins trajectories as a predictor of the remaining distance to the runway threshold. Two major contributions are presented in this paper. First, a real-time measure of the aircraft energy behaviour is defined, indicating whether the aircraft is in good condition to intercept the extended runway centreline from its current position. Secondly, a 2D trajectory suggestion is given, allowing safe management of the approach path according to atypical criteria of historical data. Finally, this document proposes a comprehensive tool for air traffic controllers, which is a major step forward in understanding, becoming aware of and resolving critical situations that could lead to accidents.

There must exist a reformulation of quantum field theory which does not refer to classical time. We propose a pre-quantum, pre-spacetime theory, which is a matrix-valued Lagrangian dynamics for gravity, Yang-Mills fields, and fermions. The definition of spin in this theory leads us to an eight dimensional octonionic space-time. The algebra of the octonions reveals the standard model; model parameters are determined by roots of the cubic characteristic equation of the exceptional Jordan algebra. We derive the asymptotic low energy value 1/137 of the fine structure constant, and predict the existence of universally interacting spin one Lorentz bosons, which replace the hypothesised graviton. Gravity is not to be quantized, but is an emergent four-dimensional classical phenomenon, precipitated by the spontaneous localisation of highly entangled fermions.

Worldwide, the cesarean section rate has steadily increased from 6.7% in 1990 to 21.1% in 2018 and is expected to rise even more. World Health Organization propose the adoption of the Robson classification system as a global standard for monitoring, evaluating, and comparing delivery rates. The purpose of the current study is to use the Robson classification system to investigate how, independently of medical factors, the day of the week and time of delivery may affect the mode of birth. In the sample analysis, we included the records of 8572 women giving birth in one private health facility in Greece. Over 60% of deliveries during the study period were performed by a cesarean section and 8.5% of deliveries were performed by operative vaginal delivery. The results of this study indicate that the lowest birth rates are observed on Monday, Saturday, and Sunday. In Robson category 1 women are 73% more likely to deliver by cesarean section between 08:00 a.m. - 03:59 p.m. compared to those who give birth between 12:00 a.m. - 07:59 a.m. Also, women in group 5.1 are 16.7 times more likely to deliver by cesarean section in the morning compared to overnight deliveries. These result point out two non-clinical variables that influences the CS rate. The Robson classification system was a useful tool for the above comparisons.

We explores the hydrodynamical limit of a homogeneous electron gas, considering the interplay between the infrared limit and phenomenological hydrodynamics. Our study involves interactions generated by non-linear coordinate transformations. The focus begins with an analysis of non-linear coordinate transformations and their impact on normal modes in a harmonic system. The Lagrangian for a harmonic oscillator is used as an illustrative example, highlighting the role of position-dependent effective mass in preventing certain coordinate values. Moving beyond single degrees of freedom, we extend the discussion to a system with several harmonic degrees of freedom, introducing a collective variable. The effective dynamics of this collective variable are defined through a Lagrange multiplier term, emphasizing linearity in the description. Our study extends to the Current Two-Point function (CTP) formalism, introducing matrices and their inverses, such as $\hD$ and $\hD^{-1}$. Further, we delve into the dynamics of current in a homogeneous electron gas at finite density and zero temperature. Green's functions are generated using a functional integral approach, and the effective action is constructed via functional Legendre transformation. The quadratic part of the generator functional is expanded to derive the effective action, leading to the Maxwell equation and the subsequent elimination of the photon field. The resulting effective action for current dynamics is expressed in terms of the Current Two-Point function, paving the way for further exploration of the hydrodynamical aspects of the electron gas. Our study combines theoretical developments and mathematical formalism to provide insights into the hydrodynamical behavior of homogeneous electron gases.

Remotely sensed data play a crucial role in monitoring the El-Niño/La-Niña Southern Oscillation (ENSO), which is an oceanic-atmospheric phenomenon occurring quasi-periodically with several impacts worldwide, such as specific biological and global climate responses. Since 1980, Earth has witnessed three strong ENSO events (1982–1983, This study aims, 2015-2016). In September 2022, La-Niña entered its third year and was unlikely to continue through 2023. Instead, since 2022 forecasts pointed to a transition from La-Nina to a Neutral phase in summer or late 2023. The onset of the El-Niño occurred around April 2023, and it is anticipated by sophisticated models to be a strong event through the Northern Hemisphere winter (December 2023 - February 2024). The aim of this study is to demonstrate the ability of the combination of two new methods to improve the accuracy of the above claim because El-Niño apart from climate anomalies, significantly impacts Earth’s ecosystems and human societies, regulating the spread of diseases by insects (e.g., malaria and dengue fever), and influencing nutrients, phytoplankton biomass, and primary productivity. This is done by exploring first the previous major El-Niño events in the period January 1876-July 2023. Our calculations show that the ongoing 2023-2024 El-Niño will not be the strongest.

The article is devoted to the analytical and numerical study of the pattern of propagation and attenuation, due to Coulomb friction, of shear waves in an infinite thin elastic plate with a circular orifice of radius lying on a rough base. In the field of motion, an exact analytical solution of a nonlinear boundary value problem for tangential stresses and transversal velocities is obtained in quadratures by the method of Laplace transformations. It turned out that the complete exhaustion of the wave front of a strong rupture occurs at a finite distance from the center of the hole and an elementary formula is given for this distance (the case of tangential forces instantly applied to the orifice boundary, and then constant in time, is considered). For various ratios of the magnitude of the limiting friction force to the amplitude of the applied load, the trailing wave fronts are obtained, after which a state of static equilibrium between the elastic and friction forces with a nonlinear distribution of residual deformations is established in the region .

The classical approach to non-linear regression in physics, is to take a mathematical model describing the functional dependence of the dependent variable from a set of independent variables, and then, using non-linear fitting algorithms, extract the parameters used in the modeling. Particularly challenging are real systems, characterised by several additional influencing factors related to specific components, like electronics or optical parts. In such cases, to make the model reproduce the data, empirically determined terms are built-in the models to compensate for the impossibility of modeling things that are, by construction, impossible to model. A new approach to solve this issue is to use neural networks, particularly feed-forward architectures with a sufficient number of hidden layers and an appropriate number of output neurons, each responsible for predicting the desired variables. Unfortunately, feed-forward neural networks (FFNNs) usually perform less efficiently when applied to multi-dimensional regression problems, that is when they are required to predict simultaneously multiple variables that depend from the input dataset in fundamentally different ways. To address this problem, we propose multi-task learning (MTL) architectures. These are characterized by multiple branches of task-specific layers, which have as input the output of a common set of layers. To demonstrate the power of this approach for multi-dimensional regression, the method is applied to luminescence sensing. Here the MTL architecture allows predicting multiple parameters, the oxygen concentration and the temperature, from a single set of measurements.

This work investigates the use of Non-destructive tests as a tool for monitoring the structural performance of concrete structures. The investigation encompassed four phases; the first of which involved the use of destructive and non-destructive mechanisms to assess concrete strength on cube specimens. The second phase research focused on site assessment for a twin engineering theatre located at the Faculty of Engineering, University of Lagos using rebound hammer and ultrasonic pulse velocity tester. The third phase was the use of linear regression analysis model with MATLAB to establish a relationship between calibrated strength as well as ultrasonic pulse velocities with their corresponding compressive strength values on cubes and values obtained from existing structures. Results show that the root-mean squared-R² values for rebound hammer ranged between 0.275 and 0.742 while ultrasonic pulse velocity R² values were in the range of 0.649 and 0.952 for air curing and water curing systems respectively. It initially appeared that the Ultrasonic pulse velocity was more suitable for predicting concrete strength than rebound hammer but further investigations showed that the latter was adequate for early age concrete while the former was more suited for aging concrete. Hence, a combined use is recommended in this work.

This study sought to investigate steel frames’ performance with dual lateral loader system (Frame bending + bracings of divergent and convergent) in near and far filed to fault. In order to this, four categories of steel frame with dual system with 8, 10 and 12 story are designed with average formation based on existing seismic regulation in 2800 standard of Iran and tenth chapter of national regulations of construction (planning and performing steel construction). Time history non-linear dynamic analysis under the effect of near and far field earthquakes has been done on plan’s models. Then the maximum of floors’ dislocation, floors’ drift, roof dislocation, base shear and energy curves of frames are shown and compared with each other. All non-linear time history analyses have been accomplished using PERFORM 3D software.

Astroviruses (AstVs) are occurs globally and are common causes of gastroenteritis in human and animals. The genetic diversity and epidemiology of AstVs in Africa is not well known, hence, we aimed to genetically characterize astroviruses in asymptomatic smallholder piglets in East Africa. Twenty-four samples randomly selected from 446 piglets (<6 months old), initially collected for rotavirus study, was sequenced for metagenomic analysis. Thirteen (13/24) samples had contigs with high identity to genus Mamastrovirus. Analysis of 7 strains with complete (or near complete) genome revealed variable nucleotide and amino acid sequence identities with known PoAstV strains. The U083 and K321 strains had nucleotide sequence similarities ranging from 66.4 to 75.4 % to the known PoAstV2 strains, nucleotide sequence similarity of U460 strain with known PoAstV3 ranged 57.0 to 65.1 % to the, while K062, K366, K451, and K456 strains showed nucleotide sequence similarities of 63.5 to 80 % to the known PoAstV4 strains. The low sequence identities (<90 %) indicate that novel genotypes of PoAstVs are circulating in the study area. Multiple recombination events were detected in our PoAstV4 strains, indicating that the genetic diversity observed in these strains may be due to recombination. Importantly, we identified potential candidate epitopes with conserved peptides in our PoAstV strains that could aid in the design of immune diagnosis tools and subunit vaccines. Our data provide new intuitions into the genetic structure of porcine astroviruses in East African.

Let $n \geq 2$ be a fixed integer and $\mathcal{A}$ be a $C^*$-algebra. A permuting $ n $-linear map $ \mathcal{G} : \mathcal{A} ^{n} \rightarrow \mathcal{A} $ is known to be symmetric generalized $n$-derivation if there exists a symmetric $n$-derivation $ \mathfrak{D} : \mathcal{A} ^{n} \rightarrow \mathcal{A} $ such that $ \mathcal{G} \left(x_{1}, x_{2}, \ldots, x_{i} x_{i}^{\prime}, \ldots, x_{n}\right)= \mathcal{G} \left(x_{1}, x_{2}, \ldots, x_{i}, \ldots, x_{n}\right) x_{i}^{\prime}+x_{i} \mathfrak{D} (x_{1}, x_{2},\ldots, x_{i}^{\prime}, \ldots, x_{n})$ holds for all $x_{i}, x_{i}^{\prime} \in \mathcal{A} $. In this paper, we investigate the structure of $C^*$-algebras involving generalized linear $n$-derivations. Moreover, we describe the forms of traces of linear $n$-derivations satisfying certain functional identity.

Background: Chronic, non-cancer pain represents a serious public health and economic issue affecting approximately 20% of the global population. Chronic pain can affect many aspects of patient’s lives, including mental health, employment, and relationships. Current medical management is largely focussed on investigating and managing acute pain. Patients and clinicians are now increasingly aware of the potential benefits of combined treatments or complex interventions in alleviating chronic pain. These approaches include both physical interventions, such as exercise or yoga, as well as psychological support including cognitive behavioural therapy (CBT) and talking therapies. Methods: This study used network meta-analyses to explore the prevalence of complex interventions in pain management, and the effects of these interventions on quality of life, using outcome measures including intensity of chronic pain, assessment of functional disability and participant’s psychological state. Results: Psychological interventions were associated with improvements in pain intensity and depression. Exercise and manipulation technique-based treatments provided a statistically significant reduction in pain intensity. This effect was enhanced when exercise and CBT were combined. Mensendieck somatocognitive therapy (MSCT) plus standard gynaecological treatment (STGT) treatments appeared to have a better effect on chronic pain than multimodal exercise plus CBT treatment. Combined MSCT and STGT treatment, and multimodal exercise plus CBT treatments, reduced pain intensity, whilst MSCT+STGT treatments had a slightly better effect than exercise plus CBT treatment.Conclusions: Complex interventions have become more popular with patients as the risks associated with other interventions including surgery and pharmacological management have become better understood. These interventions can have a significant positive effect both on the physical and psychological health of patients. The analysis presented in this study suggests that further work is warranted in this area and that additional studies are required, both in more geographically diverse locations, and with larger cohorts.

The purpose of this work was to evaluate a novel methodology developed by Digital Blood Corporation (DBC) to calculate critical blood values using four non-invasive measured values as input. The values obtained using a point-of-care testing (POCT) device were utilized for comparison and reference. Radial arterial blood was collected for the POCT comparator analysis using the Abbott i-STAT^® device. The non-invasive methodology from DBC requires four parameters to be directly measured: temperature, hemoglobin, pO2, and pCO2. Subsequently, sodium, potassium, chloride, ionized calcium, total carbon dioxide, pH, bicarbonate, and oxygen saturation are calculated using an algorithm. The agreement between the POCT and DBC’s methodology was analyzed using Bland-Altman difference plots. For a second data set, pO2 and pCO2 values collected with the POCT were used as input for DBC’s algorithm to test its robustness. Data from 37 healthy ambulatory individuals, mean age: 42.4 + 13 years; range: 18-64 years, were included in the primary analysis. In the case of the non-invasive gained four input values the greatest variation between POCT and DBC’s approach was observed for pO2 and consequently for algorithm values that depend upon pO2 precision. Replacing transcutaneous pO2 and pCO2 with POCT values demonstrates the principal ability of DBC’s algorithm to predict the additional 8 blood values in sufficient agreement with a standard POCT device in healthy patients. The algorithm developed by DBC appears to be robust in the case of healthy patients but does need the four measured input values with preciseness comparable to a POCT device to give reliable and clinically relevant results. The present study thus serves as a proof of concept to facilitate future study and further development of this methodology into a non-invasive device.

In this paper, a 3 DOF gyrscope position control have been designed and controlled using optimal control theory. An input torque has been given to the first axis and the angular position of the second axis have been analyzed while the third axis are kept free from rotation. The system mathematical model is controllable and observable. Linear Quadratic Integral (LQI) and Linear Quadratic State Feedback Regulator (LQRY) controllers have been used to improve the performance of the system. Comparison of the system with the proposed controllers for tracking a desired step and random angular position have been done using Matlab/Simulink Toolbox and a promising results has been analyzed.

This paper presents the application of optimal control problem in modeling of stirred tank heater temperature control. The analysis of the open loop system shows that the system is not efficient without a controller. Linear Quadratic Gaussian (LQG) and Linear Quadratic Integral (LQI) controllers are used to increase the performance of the system. Comparison of the closed loop system with the proposed controllers have been done with Matlab/Simulink Toolbox and a promising results have been analyzed.

Cold chain logistics of Agricultural Products demand forecasting can provide the scientific basis for the country to formulate logistics strategy, which further promotes the development of social economy and the improvement of living standards in China. In this paper, a new mathematical combined model is proposed to Agricultural Products Demand. Shandong, one of a China’s province, serves as the main producer and distributor of agricultural products. Based on the index system created from multiple related factors influencing cold chain logistics demand of agricultural products in Shandong, this paper employs principal component analysis to reduce the dimension of various indexes and predicts principal components with time series. Thereafter, multiple linear regression model and neural network model were constructed to forecast the cold chain logistics demand of agricultural products in Shandong, and their combined forecast models were compared. What's more, the paper provides insight for reference and decision-making concerning the development of cold chain logistics industry of agricultural products in Shandong province.