Preprint
Article

This version is not peer-reviewed.

Numerical Simulation of p-Terphenyl Crystal Growth by Bridg-Man Technique Assisted by Axial Low-Frequency Oscillations of the Melt

Submitted:

11 November 2026

Posted:

12 November 2026

You are already at the latest version

Abstract
The influence of forced convection induced by axial low-frequency oscillations of an inert body on the melt hydrodynamics and crystallization front morphology during the vertical Bridgman growth of p-terphenyl single crystals was investigated by numerical simulations. An efficient numerical technique using a P-controller-based momentum source term was developed, which allowed the transient integration time step to be increased to ∆t = 0.1 s and ensured high computational stability without the need for direct modeling of high-frequency disk oscillations. It was established that for moderate forced convection intensities, the maximum melt flow velocity correlates linearly with the maximum disk velocity vmax ≈ 2Aω. The analysis of energetic characteristics demonstrated a cubic scaling of the time-averaged viscous dissipation power Qµ proportional to A3ω3. Efficient stabilization of the crystallization front was successfully demonstrated by vibrations of the triangular cross-section disk.
Keywords: 
;  ;  ;  ;  
Copyright: This open access article is published under a Creative Commons CC BY 4.0 license, which permit the free download, distribution, and reuse, provided that the author and preprint are cited in any reuse.