This work aims to develop an integrated fault location and restoration approach for microgrids (MGs). This work contains two parts. Part I presents the fault location algorithm, and Part II shows the restoration algorithm. The proposed algorithms are implemented by particle swarm optimization (PSO). The fault location algorithm is based on network connection matrices, which are the modifications of bus-injection to branch-current and branch-current to bus-voltage (BCBV) matrices, to form the new system topology. The backward/forward sweep approach is used for the prefault power flow analysis. After the occurrence of fault, the voltage variation at each bus is calculated by using the Zbus modification algorithm to modify Zbus. Subsequently, the voltage error matrix is computed to search for the fault section by using PSO. After the allocation of the fault section, the multi-objective function is implemented by PSO for optimal restoration with its constraints. Finally, the IEEE 37-bus test system connected to distributed generations is utilized as the sample system for a series simulation and analysis. The outcomes demonstrated that the proposed optimal algorithm can effectively solve the fault location and restoration problem in MGs.

A detection system, modeled in a graph, uses "detectors" on a subset of vertices to uniquely identify an "intruder" at any vertex. We consider two types of detection systems: open-locating-dominating (OLD) sets and identifying codes (ICs). An OLD set gives each vertex a unique, non-empty open neighborhood of detectors, while an IC provides a unique, non-empty closed neighborhood of detectors. We explore their fault-tolerant variants: redundant OLD (RED:OLD) sets and redundant ICs (RED:ICs), which ensure that removing/disabling at most one detector guarantees the properties of OLD sets and ICs, respectively. This paper focuses on constructing optimal RED:OLD sets and RED:ICs on the infinite king's grid, and presents the proof for the bounds on their minimum densities; [3/10, 1/3] for RED:OLD sets and [3/11, 1/3] for RED:ICs.

In this study we used a non-autonomous Chua’s Circuit, and the fractional Lorenz chaos system together with a detection method from Extension theory to analyze the voltage signals. The measured bearing signals by acceleration sensor were introduced into the master and slave systems through a Chua’s Circuit. In a chaotic system minor differences can cause significant changes that generate dynamic errors, and extension matter-element models can be used to judge the bearing conditions. Extension theory can be used to establish classical and sectional domains using the dynamic errors of the fault conditions. The results obtained were compared with those from Discrete Fourier Transform analysis, Wavelet analysis and an integer order chaos system. The diagnostic ratio showed the fractional order master and slave chaos system calculations. The results show that the method presented in this paper is very suitable for monitoring the operational state of ball bearing system to be superior to the other methods. The diagnosis ratio was better and there were other significant advantages such as low cost and few.

Electrical rotating machines like Induction Motors (IMs) are widely used in several industrial applications since their robust elements, provide high efficiency and give versatility in industrial applications. Nevertheless, the occurrence of faults in IMs is inherent to their operating conditions, hence, Inter-turn short-circuit (ITSC) is one of the most common failures that affect IMs and its appearance is due to electrical stresses leads to the degradation of the stator winding insulation. In this regard, this work proposes a diagnosis methodology for the assessment and detection of incipient ITSC in IMs, the proposed method is based on the processing of vibration, stator currents and magnetic stray-flux signals. Certainly, the novelty and contribution include the characterization of different physical magnitudes by estimating a set of statistical time domain features, as well as, their fusion and reduction through the Linear discriminant Analysis technique within a feature-level fusion approach. Furthermore, the fusion and reduction of information from different physical magnitudes leads to perform the automatic fault detection and identification by a simple Neural-Network (NN) structure. The proposed method is evaluated under a complete set of experimental data and the obtained results demonstrate that the fusion of information from different sources (physical magnitudes) allows to improve the accuracy during the detection of ITSC in IMs , the results make this proposal feasible to be incorporated as a part of condition-based maintenance programs in the industry.

Availability and continuous operation under critical conditions are very important in electric machine drive systems. However, such systems, are suffering from several type of failures that affect the electric machine or the associated voltage source inverter. Therefore, fault diagnosis and fault tolerance are highly required. This paper presents a new robust deep learning-based approach to diagnosis multiple open-circuit fault in three phase two level voltage source inverter for induction motor drive applications. The proposed approach uses fault diagnosis variables obtained from sigmoid transformation of the motor stator currents. The open-circuit fault diagnosis variables are then introduced to a Bidirectional Long Short-Term Memory algorithm to detect the faulty switch(es). Several simulation and experimental results are presented to show the proposed fault diagnosis algorithm effectiveness and robustness.

Barriers to inventing electronic devices involve challenges of iterating electronic designs due to long lead times for professional circuit board milling or high-costs of commercial milling machines. To overcome these barriers this study provides open source (OS) designs for a low-cost circuit milling machine. First, design modifications for mechanical and electrical sub-systems of the OS D3D Robotics prototyping system are provided. Next, Copper Carve, an OS custom graphical user interface, is developed to enable circuit board milling by implementing backlash and substrate distortion compensation. The performance of the OS D3D circuit mill is then quantified and validated for: positional accuracy, cut quality, feature accuracy and distortion compensation. Finally, the return on investment is calculated for inventors using it. The results show by properly compensating for motion inaccuracies with Copper Carve, the machine achieves a motion resolution of 10 microns, which is more than adequate for most circuit designs. The mill is at least five times less expensive than all commercial alternatives and the material costs of the D3D mill are repaid from fabricating 20-43 boards. The results show that the OS circuit mill is of high-enough quality to enable rapid invention and distributed manufacturing of complex products containing custom electronics.

Keywords: Electrical power systems, Support vector machines, Random Forest, Machine learning, Wavelet transform, Transmission lines fault, Electrical power quality, Short circuit, Classification of faults, Localization of faults, Decision trees, Ensemble learning, K-nearest neighbors.

Computation of circuit complexity has gained much attention in the Theoretical Physics community in recent times to gain insights about the chaotic features and random fluctuations of fields in the quantum regime. Recent studies of circuit complexity take inspiration from the geometric approach of Nielsen, which itself is based on the idea of optimal quantum control in which a cost function is introduced for the various possible path to determine the optimum circuit. In this paper, we study the relationship between the circuit complexity and Morse theory within the framework of algebraic topology using which we study circuit complexity in supersymmetric quantum field theory describing both simple and inverted harmonic oscillators up to higher orders of quantum corrections. The expression of circuit complexity in quantum regime would then be given by the Hessian of the Morse function in supersymmetric quantum field theory, and try to draw conclusion from their graphical behaviour. We also provide a technical proof of the well known universal connecting relation between quantum chaos and circuit complexity of the supersymmetric quantum field theories, using the general description of Morse theory.

A common motivation for increasing open access to research findings and data is the potential to create economic benefits – but evidence is patchy and diverse. This study systematically reviewed the evidence on what kinds of economic impacts (positive and negative) open science can have, how these comes about, and how benefits could be maximized. Use of open science outputs often leaves no obvious trace, so most evidence of impacts is based on interviews, surveys, inference based on existing costs, and modelling approaches. There is indicative evidence that open access to findings/data can lead to savings in access costs, labour costs and transaction costs. There are examples of open science enabling new products, services, companies, research and collaborations. Modelling studies suggest higher returns to R&D if open access permits greater accessibility and efficiency of use of findings. Barriers include lack of skills capacity in search, interpretation and text mining, and lack of clarity around where benefits accrue. There are also contextual considerations around who benefits most from open science (e.g. sectors, small vs larger companies, types of dataset). Recommendations captured in the review include more research, monitoring and evaluation (including developing metrics), promoting benefits, capacity building and making outputs more audience-friendly.

The purpose of this paper is to assess the degree of openness of scientific articles on bioeconomy. Based on a WoS corpus of 2,489 articles published between 2015 and 2019, we calculated bibliometric indicators, explored the openness of each paper and assessed the share of journals, countries and research areas of these articles. The results show a sharp increase and diversification of articles in the field of bioeconomy, with a beginning long tail distribution. 45.6% of the articles are freely available, and the share of OA papers is steadily increasing, from 31% in 2015 to 52% in 2019. Gold is the most important variant of OA. Open access is low in the applied research areas of chemical, agricultural and environmental engineering but higher in the domains of energy and fuels, forestry, and green and sustainable science and technology. The UK and the Netherlands have the highest rates of OA papers, followed by Spain and Germany. The funding rate of OA papers is higher than of non-OA papers. This is the first bibliometric study on open access to articles on bioeconomy. The results can be useful for the further development of OA editorial and funding criteria in the field of bioeconomy.

The digital format opens up new possibilities for interaction with monographic publications. In particular, annotation tools make it possible to broaden the discussion on the content of a book, to suggest new ideas, to report errors or inaccuracies, and to conduct open peer reviews. However, this requires the support of the users who might not yet be familiar with the annotation of digital documents. This paper will give concrete examples and recommendations for exploiting the potential of annotation in academic research and teaching. After presenting the annotation tool of Hypothesis, the article focuses on its use in the context of HIRMEOS (High Integration of Research Monographs in the European Open Science Infrastructure), a project aimed to improve the Open Access digital monograph. The general line and the aims of a post-peer review experiment with the annotation tool, as well as its usage in didactic activities concerning monographic publications are presented and proposed as potential best practices for similar annotation activities.

Learning models of the cerebellum propose that the cerebellum implements an algorithm which makes iterative adjustments to synaptic transmission strength that collectively determine the response to input in learned patterns following training. We propose instead that pattern recognition and control of firing by output cells are separately handled functions which process independently variable data. This can account for the evidence without a machine learning algorithm. The model is a hybrid of physiological arguments and computational methods used to test and quantify the ideas. We argue inter alia that learning operates at the level of functional groups of Purkinje cells defined by their shared climbing fibre input; Golgi cells have several functions and regulation of parallel fibre activity by Golgi cells is not in the expected way; recoding of input to the cerebellum received in the granular layer converts the number of input variables (variables expressed in mossy fibre input to the system) into a much reduced number of functional variables expressed by internal signals traffic; circuits simultaneously execute separate but integrated functions of pattern memory and output coding; they are able to operate separately because the expression of data used in each varies independently of the other; output rates are not learned but controlled by recent relevant input signals in a window opened by pattern memory; the moment-to-moment probability that a Purkinje cell spikes is synchronised across a microzone; a principal function of functional organisation of Purkinje cells into microzones is to increase resolution of rate coded information received by the output cells of the circuit, and to do so in a very short integration window, so that circuit architecture can be explained partly as a device with this function.

During the last years, significant initiatives have been launched for the dissemination of Open Access as part of the Open Science movement. Nevertheless, the other major pillars of Open Science such as Open Research Data (ORD) and Open Peer Review (OPR) are still in an early stage of development among the communities of researchers and stakeholders. The present study sought to unveil the perceptions of a medical and health sciences community about these issues. Through the investigation of researchers’ attitude, valuable conclusions can be drawn, especially in the field of medicine and health sciences, where an explosive growth of scientific publishing exists. A quantitative survey was conducted based on a structured questionnaire, with 51.8% response rate (215 responses out of 415 electronic invitations). The participants in the survey agreed with the ORD principles However they ignored basic terms like FAIR (Findable, Accessible, Interoperable and Reusable) and appeared incentive to permit the exploitation of their data. Regarding OPR, participants expressed their agreement, implying their interest for a trustworthy evaluation system. Conclusively, researchers urge to receive proper training for both ORD principles and OPR processes which combined with a reformed evaluation system will enable them to take full advantage of the opportunities that arise from the new scholar publishing and communication landscape.

A challenge in building large-scale superconducting quantum processors is the precise control and manipulation of the qubit state. However, the crosstalk between the microwave control lines impedes the parallel execution of high-fidelity digital and analog quantum operations. Here, we propose and demonstrate a universal compensation protocol for calibrating the microwave signal crosstalk. We also introduce amplified error sequences to optimize the accuracy. Furthermore, we show a definitive improvement in parallel gate operations with crosstalk cancellation, demonstrating the technique's effectiveness. This work paves the way for superconducting hardware that features automated calibration of microwave crosstalk, leading to enhanced fidelities in multiqubit circuits.

Agricultural production needs technologies that assist the management of natural resources, for example, the collection of real-time data on soil, water, weather, crops, and biodiversity conditions. Sensor technology solutions and open-source software are appropriate for promoting more sustainable agricultural production. Among the advantages of using open-source technologies and software is its potential for extension, collaboration, customization, flexibility, maintenance cost, transparency, speed, and better security. Given the above, the objective of this research was to find, in different electronic databases, exclusively open-source software for precision agriculture, offering a systematic review, and addressing considerations and challenges. This survey considers up-to-date open-source software available in repositories such as GitHub and GitLab, to understand its characteristics and application formats.

(1) Background: The 2002 Budapest Open Access Initiative recommended on self-archiving of scientific articles in open repositories as the “green road” to open access. Twenty years later, only one part of the researchers deposits their publications in open repositories; moreover, one part of the repositories’ content is not based on self-archived deposits but on mediated nonfaculty contributions. The purpose of the paper is to provide more empirical evidence on this situation and to assess the impact on the future of the green road. (2) Methods: We analyzed the contributions on the French national HAL repository from more than 1,000 laboratories affiliated to the ten most important French research universities, with a focus on 2020, representing 14,023 contributor accounts and 166,939 deposits. (3) Results: We identified seven different types of contributor accounts, including deposits from nonfaculty staff and import flows from other platforms. Mediated nonfaculty contribution accounts for at least 48% of the deposits. We also identified difference between institutions and disciplines. (4) Conclusions: Our empirical results reveal a transformation of open repositories from self-archiving and direct scientific communication towards research information management. Repositories like HAL are somewhere in the middle of the process. The paper describes data quality as the main issue and major challenge of this transformation.

Abstract: High power semiconductor laser is a kind of photoelectric device with high efficiency and high stability, the performance of its drive system directly affects its output characteristics and service life. In order to solve the problems of stability and robustness of the output power of semiconductor laser, a semiconductor laser driving power supply with high efficiency, low ripple and strong anti-interference ability was developed. The power supply adopts full-bridge LCC resonant power topology. Firstly, a mathematical model is established to analyze the relationship between LCC resonator parameters and output current gain. Secondly, a LCC resonator parameter design method is proposed to reduce the current stress of components, and the variable frequency phase shift (PFM-PWM) composite control strategy and linear active disturbance rejection control (LADRC) algorithm are proposed, which not only ensures the zero voltage (ZVS) conduction of MOS tube, but also reduces the on-off loss of MOS tube. Improved power efficiency and suppressed output current ripple; At the same time, the instability of the output current is ensured due to the input voltage, load and parasitic parameter change of the circuit. Finally, the simulation and experimental results show that the power supply can be continuously adjustable in the output current range of 0-40A, the current ripple is less than 0.8%, and the working efficiency is up to 92%. It has the characteristics of high stability, small ripple, high efficiency, low cost and good robustness.

Open-source devices are nowadays used in a vast number of research fields like medicine, education, agriculture, and sports among others. In this work, an open-source, portable, low cost pH logger, appropriate for in situ meas-urements was designed and developed to assist in experiments on agricultural produce manufacturing. Τhe device was calibrated manually using pH buffers for values of 4.01 and 7.01. Then it was tested by manually measuring pH from the juice of citrus fruits. A waterproof temperature sensor was added to the device for temperature compen-sation when measuring pH. A formal method comparison process between the open-source device and a Hanna HI9024 Waterproof pH Meter was designed to assess their agreement. We derived indices of agreement and graph-ical assessment tools using mixed-effects models. Advantages and disadvantages for interpreting agreement through the proposed procedure are discussed. In our illustration, indices reported mediocre agreement and the subsequent similarity analysis revealed a fixed bias of 0.22 pH units. After recalibration, agreement between the devices im-proved to excellent levels. The process can be followed in general to avoid misleading or over-simplistic results of studies reporting solely correlation coefficients for formal comparison purposes.

Basic features of seed dormancy are illustrated. The seed overall regulatory network governs seed metabolism and development, and it is coordinated by plant hormones. A functional model focused on abscisic acid (ABA), the foremost plant hormone in dormancy, is used as a framework to critically discuss the literature. Gibberellins (GAs) have a main role in germination, and the ABA – GAs balance is a typical feature of the seed state: ABA dominates during dormancy and GAs prevail through germination. Thus, the literature converges toward envisaging the development switch between dormancy and germination as represented by the ABA/GAs ratio. The ABA – GAs antagonism is based on mutual inhibition, a feature of the regulatory network architecture that characterizes development trajectories based on a regulatory circuit with a bistable switch. Properties of such kind of regulatory architecture are introduced step by step, and it is shown that seed development – towards either dormancy or germination – is more properly represented by a tristable regulatory circuit, whose intermediate metastable states ultimately take one or the other development trajectory. Although the ABA/GAs ratio can conveniently represent the state of the seed overall regulatory network along the seed development trajectory, specific (unknown) dormancy factors are required to determine the development trajectory. The development landscape is shown to provide a well-suited representation of seed states travelling along developmental trajectories, particularly when the states are envisioned as regulatory circuits. Looking at seed dormancy in terms of regulatory circuits and development landscapes offers a valuable perspective to improve our understanding of this biological phenomenon.

Industrial pilot projects often rely on proprietary and expensive electronic hardware to control and monitor experiments. This raises costs and retards innovation. Open-source hardware tools exist for implementing these processes individually, however, they are not easily integrated with other designs. The Broadly Reconfigurable and Expandable Automation Device (BREAD) framework provides many open-source devices which can be connected to create more complex data acquisition and control systems. This article explores the feasibility of using BREAD plug-and-play open hardware to quickly design and test monitoring and control electronics for an industrial materials processing prototype pyrolysis reactor. Generally, pilot-scale pyrolysis plants are expensive custom designed systems. The plug-and-play prototype approach is first tested by connecting it to the pyrolysis reactor and ensuring it can measure temperature and actuate heaters and a stirring motor. Next, a single circuit board system was created and tested using the designs from the BREAD prototype to reduce the number of microcontrollers required. Both open-source control systems were capable of reliably running the pyrolysis reactor continuously and the overall cost of control was reduced by more than 10X. Open-source, plug-and-play hardware provides a reliable avenue for researchers to quickly develop data acquisition and control electronics for industrial-scale experiments.

Preprints is a multidisciplinary preprint platform that makes scientific manuscripts from all fields of research immediately available at www.preprints.org. Preprints is a free (not-for-profit) open access service supported by MDPI in Basel, Switzerland.

We are witnessing a dramatic transformation in the way we do science. In recent years, significant flaws with existing scientific methods have come to light, including lack of transparency, insufficient involvement of stakeholders, disconnection from the public, and limited reproducibility of research findings. These concerns have sparked a global movement to revolutionize scientific practice and the emergence of Open Science. This new approach to science extends principles of openness to the entire research cycle, from hypothesis generation to data collection, analysis, replication, and translation from research to practice. Open Science seeks to remove all barriers to conducting high quality, rigorous, and impactful scientific research by ensuring that the data, methods, and opportunities for collaboration are open to all. Emerging digital technologies and "big data" (see "Ten simple rules for responsible big data research") have further accelerated the Open Science movement by affording new approaches to data sharing, connecting researcher networks, and facilitating the dissemination of research findings. Open scientific practices are also having a profound impact on the health sciences and medical research, and specifically how we conduct clinical research with human participants. Human health research necessitates careful considerations for practicing science in an ethical manner. There is also a particular urgency to human health research since the goal is to help people, so doing good science takes on a different meaning than simply doing science well. It also implores the scientist to reassess the conventional view of human health research as a pursuit conducted by scientists on human subjects, and lays a greater emphasis on inclusive and ethical practices to ensure that the research takes into account the interests of those who would be most impacted by the research. Openness in the context of human health research also raises greater concerns about privacy and security and presents more opportunities for people, including participants of research studies, to contribute in every capacity. At the core of open health research, scientific discoveries are not only the product of collaboration across disciplines, but must also be owned by the community that is inclusive of researchers, health workers, and patients and their families. To guide successful open health research practices, it is essential to carefully consider and delineate its guiding principles. This editorial is aimed at individuals participating in health science in any capacity, including but not limited to people living with medical conditions, health professionals, study participants, and researchers spanning all types of disciplines. We present ten simple rules that, while not comprehensive, offer guidance for conducting health research with human participants in an open, ethical, and rigorous manner. These rules can be difficult, resource-intensive, and can conflict with one another. They are aspirational and are intended to accelerate and improve the quality of human health research. Work that fails to follow these rules is not necessarily an indication of poor quality research, especially if the reasons for breaking the rules are considered and articulated (see rule 6: document everything). While most of the responsibility of following these rules falls on researchers, anyone involved in human health research in any capacity can apply them.

We present a discussion and analysis regarding the benefits and limitations of open and non-anonymized peer review based on literature results and responses to a survey on the reviewing process of alt.chi, a more or less open-review track within the CHI conference, the predominant conference in the field of human-computer interaction (HCI). This track currently is the only implementation of an open-peer-review process in the field of HCI while, with the recent increase in interest in open science practices, open review is now being considered and used in other fields. We collected 30 responses from alt.chi authors and reviewers and found that, while the benefits are quite clear and the system is generally well liked by alt.chi participants, they are reluctant to see it used in other venues. This concurs with a number of recent studies that suggest a divergence between support for a more open review process and its practical implementation. The data and scripts are available on https://osf.io/vuw7h/, and the figures and follow-up work on http://tiny.cc/OpenReviews.

Distributed digital manufacturing offers a solution to medical supply and technology shortages during pandemics. To prepare for the next pandemic, this study reviews the state-of-the-art for open hardware designs needed in a COVID-19-like pandemic. It evaluates the readiness of the top twenty technologies requested by the Government of India. The results show that the majority of the actual medical products have had some open source development, however, only 15% of the supporting technologies that make the open source device possible are freely available. The results show there is still considerable work needed to provide open source paths for the development of all the medical hardware needed during pandemics. Five core areas of future work are discussed that include: i) technical development of a wide-range of open source solutions for all medical supplies and devices, ii) policies that protect the productivity of laboratories, makerspaces and fabrication facilities during a pandemic, as well as iii) streamlining the regulatory process, iv) developing Good-Samaritan laws to protect makers and designers of open medical hardware, as well as to compel those with knowledge that will save lives to share it, and v) requiring all citizen-funded research to be released with free and open source licenses.

Abstract: Recent years demonstrate the increased attention to radon from two scientific directions. After neglecting radon as earthquake precursors in 1990-th it becomes again the subject of earthquake-forecast papers discussions due to growing networks of the radon monitoring in different countries, especially, the technologies of real-time radon measurements where the gamma-spectrometers become the leader of interest as the sources of 222Rn identification. The second fast developing direction is including the radon in the Lithosphere-Atmosphere-Ionosphere Coupling (LAIC) models as a source of the boundary layer ionization. And here we encounter with second direction which is not connected with the earthquake forecast problems. It is the role of air ionization by radon as a source of the Global Electric Circuit (GEC) modification. In this publication we try to unite all these problems to present more complex view on radon as important element of our environment.

The most common and taught membrane theory assumes that the membrane behaves as a kind of electrical capacitance that is exposed to an electrical current generated by an ionic flow. If this statement is verifiable, it can be confirmed by the laws of physics, mathematics and in particular electricity. We will demonstrate that this hypothesis is not verified and that it is necessary to modify biophysics according to already established and experimentally verified principles of physics.

Drosophila circadian circuit is one of the best described neural circuits but is complex enough to obscure our understanding of how it actually works. Animals’ rhythmic behavior, the seemingly simple outcome of their internal clocks, relies on the interaction of heterogeneous clock neurons that are spread across the brain. Direct observations of their coordinated network interactions can bring us forward in understanding the circuit. The current challenge is to observe activity of each of these neurons over a long span of time –hours to days– in live animals. Here we review the progress in circadian circuit interrogation powered by in vivo calcium imaging.

By using 0.35-um CMOS process, this work achieves a design of analogous band-gap reference voltage circuit with low temperature coefficient. The proposed circuit operates at 3V and generates a reference current of 44 uA. The HSPICE simulation results show the temperature coefficient of this circuit is 23 ppm/℃ at range of -10 ℃ to 100 ℃, and the line regulation (the ratio of output current variation to supply voltage variation) is estimated as 1.95 uA/V from supply voltage variation of 3 V to 5 V. The experimental chip is fabricated and measured. The circuit provides adjustable capability for output voltage among temperature variation of -10 - 100 ℃. The chip area is 534 × 695 um^2. In this new design, the operational amplifier is not necessary. The chip design effort can be great reduced.

Silicon-based photonic integrated circuit (PIC) is a research focus in producing high-density photonics. One of the potential applications of silicon PIC is the sensing and measurement system. In this work, we use the one-dimensional photonic crystal (1D-PhC) cavity design which and utilize it at the PIC level design. The 1D PhC design used as the compact model has the same characteristics as experimentally demonstrated in previous works. The compact model is made from the S-parameter extraction of the 1D-PhC device which is done by using Lumerical FDTD software. The PIC design integrates the 1D-PhC device as a sensing component with a PN-phase shifter (PN-PS) to function as a refractive index (RI) sensor calibration or tuning circuit. A custom design of PN-PS device is used by simulating and extracting the bias voltage-effective index (bias-Neff) data by using Lumerical DEVICE and MODE into the circuit simulator. The circuit-level simulation is done by using Lumerical Interconnect software. Finally, we show the GDSII layout design of the 1D-PhC based photonic sensor calibration circuit with an analysis of generic silicon PIC design rules. The designed PIC is applicable for the bio-sensing applications and photonic SOC component. This work also shows the promise of PIC design approach for further PIC development.

Open-source 3-D printing has played a pivotal role in revolutionizing the additive manufacturing (AM) landscape, by making distributed manufacturing economic, democratizing access, and fostering far more rapid innovation than antiquated proprietary systems. Unfortunately, some 3-D printing manufacturing companies began deviating from open-source principles and violating licenses for the detriment of the community. To determine if a pattern has emerged of companies patenting clearly open-source innovations, this study presents three case studies from the three primary regions of open-source 3-D printing development (EU, U.S. and China) as well as three aspects of 3-D printing technology (AM materials, an open-source 3-D printer, and core open-source 3-D printing concepts used in most 3-D printers). The results of this review have shown that non-inventing entities called patent parasites are patenting open-source inventions already well-established in the open source community and in the most egregious cases commercialized by one (or several) firms at the time of the patent filing. Patent parasites are able to patent open-source innovations by using a different language, vague patent titles and broad claims that encompass enormous swaths of widely diffused open-source innovation space. This practice poses a severe threat to innovation and several approaches to irradicate the threat are discussed.

This study provides designs for a low-cost, easily replicable open source lab-grade digital scale that can be used as a precision balance. The design is such that it can be manufactured for use in most labs throughout the world with open source RepRap-class material extrusion-based 3-D printers for the mechanical components and readily available open source electronics including the Arduino Nano. Several versions of the design were fabricated and tested for precision and accuracy for a range of load cells. The results showed the open source scale was found to be repeatable within 0.1g with multiple load cells, with even better precision (0.01g) depending on load cell range and style. The scale tracks linearly with proprietary lab-grade scales, meeting the performance specified in the load cell data sheets, indicating that it is accurate across the range of the load cell installed. The smallest loadcell tested(100g) offers precision on the order of a commercial digital mass balance. The scale can be produced at significant cost savings compared to scales of comparable range and precision when serial capability is present. The cost savings increase significantly as the range of the scale increases and are particularly well-suited for resource-constrained medical and scientific facilities.

This paper introduces an innovative energy circuit that challenges conventional understandings of energy conservation, marking a significant departure from traditional frameworks. Seeking to enhance energy generation within existing paradigms, this innovation holds promise for addressing pressing global issues such as the energy crisis and environmental sustainability, while also stimulating scientific inquiry. In contrast to prevalent misconceptions rooted in philosophical and scientific constraints, this study refutes the notion of generating energy from nothing and questions the viability of perpetual motion machines as conceptual models. Instead, it proposes a novel circuit design derived from an unconventional electrical short circuit, which is shown to disrupt the established principles of energy conservation. This circuit offers a transformative approach with diverse applications, including self-recharging capabilities for electric vehicles, bolstering microgrid infrastructure, and facilitating the integration of renewable energy sources. Transcending conventional scientific boundaries, this paper prompts philosophical reflections on the evolving nature of scientific exploration. Ultimately, the energy circuit represents a pivotal step towards mitigating the global energy crisis by reducing reliance on finite resources and fostering sustainability. The paper concludes by illustrating the circuit's potential to revolutionize energy systems and contribute to a more resilient and sustainable future.

While traditional AC mechanical circuit breakers have been competent for protecting AC circuits, high penetration of DC power distribution technologies like DC microgrids (MGs) obligate better disruption performance features such as quick and reliable switch-ing speeds. However, a DC circuit breaker (DCCB) novel design is challenging due to the need to quickly break high currents within milliseconds, caused by the high fault current rise in DC grids compared to AC grids. In DC grids, the circuit breaker must provide zero current crossing and be designed for absorbing surges since the arc is not naturally extinguished by the system. Additionally, the DC breaker must mitigate the magnetic energy stored in the system inductance and withstand residual over-voltages after current interruption. These challenges require a fundamentally different topology for DCCBs, which are typically made using solid-state semiconductor technology, metal oxide varistors (MOV), and ultra-fast switches. This study aims to provide a comprehensive review on development, design, and performance description of DCCBs in parallel with a specific concentration on analysis of internal topology, energy absorption path and sub-circuits in Solid-State (SS)-based DCCBs. The research explores various novel designs that introduce different structures for energy dissipation solution. The classification of these designs is based on the fundamental principles of surge mitigation and a detailed analysis of the techniques employed in DCCBs. In addition, our framework offers an advantageous reference point for the future evolution of SS-circuit breakers in numerous developing power delivery systems.

Leisure-time physical activity (LTPA) is associated with access and use of public open spaces. The “President João Goulart Elevated Avenue” and current denominated “Minhocão” is a facility for leisure activities that are open for people during the night/weekends. The aim of this study was to examine if the prevalence of LTPA among individuals living in the surroundings of Minhocão is different according to proximity to, and use of, the facility. We conducted a cross-sectional study with cluster sampling with people aged ≥18 years who lived in households until 500m and between 501m to 1500m of Minhocão. The survey was conducted between December/2017 until March/2019 with an electronic questionnaire self-responded. We conducted bivariate analysis and Poisson regression to examine possible differences in LTPA according to the proximity of residences and use of Minhocão. The analysis used post-stratification weights. A total of 12,030 telephone numbers of people were drawn (≤500m = 6,942; and >500m to ≤1500m = 5,088). The final sample analyzed were of 235 residents who returned the questionnaires. There was a higher prevalence of individuals engaging in at least 150 minutes per week of LTPA among users than non-users (Prevalence Ratio=2.23, IC95%1.72-2.90). People who used the park had higher prevalence of all types of LTPA than non-users. The results can serve to inform government decision-making on the future of Minhocão.

The pneumatic muscle is an actuator well known for its inherited compliance. In the last years, there have been a lot of applications of these actuators, mainly oriented toward medical devices. However, there are few papers that use muscle as a model associated with mechanical structures. These actuators are difficult to control because their stiffness depends on the applied pressure, determining a non-linear behavior. This article presents a model, created in Matlab, considering the muscle as a kinematic structure. The model is simulated as an individual structure and a PID controller is applied to test the response. Then, these results are validated by experimental tests done in the laboratory on different types of muscles. Comparison results validate the accuracy of the model.

Memristor has attracted a lot of interest due to its high processing speed, low power consumption and high integration ability, which is critical for electronic systems and memory-centric computing. However, the memristor programming circuit and strategy are still inflexible and complex, since the signal generator/collector and stimulate pulse must be carefully matched and designed based on memristor intrinsic characteristics without reconfigurable. Here, a simple and effective circuit only consists a parallel reference-resistor-and-NMOS is designed to program memristor with a more than 99% memristance precision. And the amplitude and width of stimulate pulse are fixed to ±4V and 5ms, respectively. In order to cope with the device variation, such as ±10% tolerance of transition voltage, an optimized programming strategy was proposed and demonstrated great robustness. Additionally, a set of reference resistors and NMOSs have been added to facilitate multi-level memristance operation without requiring any changes to the circuit structure. This program circuit was also employed to program memristor crossbar remains 99% precision. In the end, a memristor-based convolutional neural network which controlled by our optimized programming circuit was used for image recognition, and 89.36% accuracy can be achieved even under 15.8% memristance tolerance. This novel circuit demonstrates a simple and flexible strategy in memristor programming, providing a new way to control memristor crossbar for practical application.

To build a stable power factor and high output accuracy, it should use balanced active and reactive power, also used ultrasonic PWM was used with the frequencies (20–500 kHz). I also used a three-phase dynamic load at the output system and was connected to the compound splicing (CS) system this is a novelty. An oscillator circuit with 4Ghz as a microcontroller is a novelty, and designing ADC is utilized to increase accuracy, as well as contribute to the reduction of loss brought on by the characteristics of voltage source inverters (VSI), such as dead time determined by the excess voltage or voltage drop in the inverter, circumstances abnormal to the load current, such as short circuit current in the production phase, and so forth. The innovation relates to the inverter's load sensing circuit, current smoothing during operation, reaction, spontaneous power factor enhancement of the inverter, and correction of reactive power of passive devices. This invention contributes to the advancement of D.C to A.C power converter by the achievement of extremely low losses, excellent precision, and lightweight construction. Additionally, the accuracy ranges from 99%, and the total harmonic distortion (THD) of the voltage and current is (0.1%-0.8%). We Power MOSFET are used, along with FPGA to improve control over the creation of ultrasonic PWM signals, the programmable peripheral interface (PPI) 8255A for regulatory work. The marks serve as proof of this.

The role of fractional calculus in circuit systems has received increased attention in recent years. In order to evaluate the effectiveness of time-domain calculation methods in the analysis of fractional-order piecewise smooth circuit systems, an experimental prototype is developed and the effects of three typical calculation methods in different test scenarios are compared and studied in this paper. It is proved that Oustaloup’s rational approximation method usually overestimates the peak-to-peak current and brings in pulse-voltage phenomenon in piecewise smooth test scenarios, while the results of two iterative recurrence-form numerical methods are in good agreement with the experimental results. The study results are dedicated to provide a reference for efficiently deploying calculation methods in fractional-order piecewise smooth circuit systems. Some quantitative analysis results are concluded in this paper.

Based on the analysis of the working principle, circuit design and working loss of the common charger DC/DC converter, this paper designs a ZVS half-bridge three-level DC/DC converter based on non-phase-shift control mode, and proposes a multi-stage constant current and voltage limiting charging control strategy based on modulation wave selection control. The simulation results show that the proposed method and control strategy have faster voltage regulation ability and wider stability margin, and can achieve stable current sharing control in the charging process.

Modern technologies for recycling electronic waste (e-waste) impose high economic efficiency and environmental safety requirements. Among existing technologies, hydrometallurgy is considered the most promising technology for e-waste recycling. Increasing attention to the chlorination method is associated with the complex recycling of low-grade ores containing noble metals and secondary polymetallic raw materials. In this paper, we propose a new scheme for leaching metals from computer printed circuits (PCBs) pre-crushed in a disintegrator: the processes of chlorine production and hydrochlorination are implemented in one reactor under the action of alternating current (AC) of industrial frequency (50 Hz). It was found that complete leaching of gold is achieved from fine fractions of raw materials containing 0.03% and 0.01% of the gold at an experiment duration of 2 hours, a current density of 0.66 A·cm-2, and a solid/liquid ratio of 8.6 g·L-1. Under the same conditions of the electrochemical leaching process from the fraction of raw material with a gold content of 0.08%, the degree of metal leaching is 80.5%. At the same time, with an increase in the copper content in the raw material from 1.40% to 6.13%, an increase in the degree of its leaching from 84.6% to 95.2%, respectively, is observed. These results will serve as a foundation for developing a complex technology for recovering valuable metals from PCBs.

In this paper, we have shown the electronic circuit equivalence of a mechanical system consists of two oscillators coupled with each other. The mechanical design has the effects of the magnetic, resistance forces and the spring constant of the system is periodically varying. We have shown that the system’s state variables, such as the displacements and the velocities, under the effects of different forces, lead to some nonlinear behaviors, like a transition from the fixed point attractor to the chaotic attractor through the periodic and quasi-periodic attractors. We have constructed the equivalent electronic circuit of this mechanical system and have verified the numerically obtained behaviors using the electronic circuit.

In this paper, the design process of BLDC adopting the dual rotor method that can reduce the overall size of the motor while generating the same torque as the conventional Permanent Magnet BLDC is analyzed. A simple size is selected by obtaining the torque per rotor volume (TRV), and a method of matching the counter electromotive force by selecting the pole arc of the magnet through a magnetic equivalent circuit is analyzed. Since the efficiency is low because the 120-degree commutation method is selected, the middle stator is optimized through detailed design through the experimental design method. Afterwards, it has the advantage of being able to shift without stopping due to the characteristic of a dual rotor. For this, an analysis of the driving characteristics for each mode is performed.

Since the requirements in terms of power of the electronic applications range wide, the developed Energy Harvesting (EH) systems limit their availability to the less power demanding applications. However, this paper focuses on increasing the energy levels collected in the EH system so that it can be included in more demanding applications in terms of power. Therefore, an electronic system capable of grouping many single harvesting channels into one single system is analyzed in this paper. This multi-harvester electronic system is able to manage efficiently the energy collected by multiple vibratory transducers. The paper includes a comparison of its performance against some of the State-of-the-Art EH energy management circuits that interface the transducers. The method employed to demonstrate the intrinsic efficiency of each of the electronic circuits tested was based on experimental tests, where the average power transferred from several identical and simultaneous electric sources to a single storage element was measured. It was found out that only one energy management circuit was able to increase the transferred energy in a linear way while new input electric sources were added.

In order to deal with imprecision, ambiguity, and uncertainty in data analysis, Pawlak introduced rough set theory in 1982. This paper aims to expand the scope of basic set theory developed by presenting the notions of δP-upper and δP-lower approximations, that are based on the notion of δP-open sets, we additionally examine a few of their fundamental characteristics.

The terms 'open' and 'openness' are widely used across the current higher education environment particularly in the areas of repository services and scholarly communications. Open-access licensing and open-source licensing are two prevalent manifestations of open culture within higher education research environments. As theoretical ideals, open-licensing models aim at openness and academic freedom. But operating as they do within the context of global neoliberalism, to what extent are these models constructed by, sustained by, and co-opted by neoliberalism? In this paper, we interrogate the use of open-licensing within scholarly communications and within the larger societal context of neoliberalism. Through synthesis of various sources, we will examine how open access licensing models have been constrained by neoliberal or otherwise corporate agendas, how open access and open scholarship have been reframed within discourses of compliance, how open-source software models and software are co-opted by politico-economic forces, and how the language of 'openness' is widely misused in higher education and repository services circles to drive agendas that run counter to actually increasing openness. We will finish by suggesting ways to resist this trend and use open-licensing models to resist neoliberal agendas in open scholarship.

The research field of energy system analysis is dealing with increasingly complex energy systems and their respective challenges. Moreover, the requirement for open science has become a focal point of public interest. Both drivers have triggered the development of a broad range of (open) energy models and frameworks in recent years. However, there are hardly any approaches on how to evaluate these tools in terms of their capabilities to tackle energy system modelling challenges. This paper describes a first step towards a flexible evaluation of software to model energy systems. We propose a qualitative approach as an useful supplementary to existing model fact sheets and transparency checklists. We demonstrate the applicability by evaluating the newly developed “Open Energy Modelling Framework” with respect to existing challenges in energy system modelling. The case study results highlight that challenges related to complexity and scientific standards can be tackled to a large extent while the challenges of model utilization and interdisciplinary modelling are only tackled partially. However, the challenge of uncertainty remains for the most part unaddressed at present. Advantages of the evaluation approach lie in its simplicity, flexibility and transferability to other tools. Disadvantages mostly stem from its qualitative nature. Our analysis reveals that some challenges in the field of energy system modelling cannot be addressed by a software as they are on meta level like model result communication and interdisciplinary modelling.

The purpose of this study was to investigate the effect of circuit training on β-amyloid, BDNF, and cognitive function in untrained obese elderly Korean women. The subjects for the study were aged 65–70 years, composed of the circuit training group(n=12) and control group(n=11). The 60-minute combined exercise was performed 3 times per week for 16 weeks. Exercise intensity was progressively increased from 40% HRR to 70% HRR. The test data were analyzed by paired t-test, independent t-test, and two-way repeated measures ANOVA, and the alpha level of .05 was set for all tests of significance. The findings of this study were as follows: β-amyloid significantly decreased after the exercise group had compared to before the exercise and BDNF and cognitive function significantly increased after the exercise group had compared to before the exercise. However, there were no significant changes in β-amyloid, BDNF, and cognitive function in the control group Therefore, it is suggested that the circuit training used in this study could be an effective exercise method for improving the risk factors of cognitive impairment in obese elderly Korean women.

This article focuses on the variation of how the U.S. Circuit Court of Appeals uses the language of trauma in gender-based asylum claims. Gender-based asylum claims include female genital mu-tilation (FGM), domestic violence, forced marriage, coercive population control (CPC) in the form of forced abortions and forced sterilizations, and rape. The Circuit Courts have reviewed appeals from petitioners with asylum claims since 1946, yet the language of trauma did not appear in the Court’s decisions until 1983. From 1983-2023 only 385, 3.85% or less, of the over 10,000 asylum cases before the Circuit Courts used the language of trauma in its legal interpretation of persecution. I have identified 101 gender-based asylum cases that were reviewed by one of the eleven U.S. Circuit Court of Appeals that apply the language of trauma in its legal interpretation of persecution for this analysis. This study found that U.S. Circuit Courts use the language of trauma in four ways: precedent cases, psychological trauma, physical trauma, and policies and reports when reviewing gender-based asylum claims.

In this work, we present a transceiver front-end in SiGe BiCMOS technology that can provide an ultra-wide bandwidth of 100 GHz at millimeter-wave frequencies. The front-end employs a novel configuration for low-loss distribution of broadband generated pulses as well as coherent spatial combining of received pulses. This leads to the realization of a fully integrated ultra-high-resolution imaging chip for biomedical applications. We realized an ultra-wide imaging bandwidth of 100 GHz by the integration of two adjacent, disjointed frequency sub-bands of 10–50 GHz and 50–110 GHz respectively. The transceiver front-end is capable of both transmit (TX) and receive (RX) operations. This is a key building-block for a scalable system in which a unit cell is repeated in the X and Y directions resulting in less power and area consumption. The imaging elements were designed and fabricated in Global Foundry 130-nm SiGe 8XP BiCMOS process technology.

Negative feedback to the back gate of MOS devices available in FD-SOI technologies can be used to improve linearity of operational amplifiers. Two operational amplifiers designed and fabricated in a 22nm FD-SOI technology illustrate this technique, its advantages and limitations.

In GDI engine applications, high-pressure (H.P.) injectors typically require to be designed to be capable of rapid response for GDI engines in order to be driven in the rapid response with respect to magnetic actuators, allowing for example more precise air-fuel ratio control in the GDI engines. The H.P. fuel injector is a highly dynamic component requiring careful voltage and pressure input modulation to achieve the required fuel injection quantities of GDI engines. The accurate fuel injection curves are a key influence for this technology, therefore will require the estimation of the fuel flow rate to be realized. In this paper, a PIC microchip for programming injector drive circuits is implemented to improve the performance of a H.P. fuel injector and tested to verify its feasibility. In the proposed injector drive circuit, powers MOSFETs directly control the charging/discharging current by a dsPIC30F4011 microchip. Design and analysis of the proposed injector drive circuit are presented. Next, effects of total pulse width, injector supply voltage, fuel system pressure and PWM operation on fuel injection quantities of a H.P. fuel injector are measured. Also, the measured data of the H.P. fuel injector fed by the injector driving circuit are defined as the fuel injection curves. Finally experimental results are provided for verification of the proposed injector drive circuit.

The landscape of medical education has witnessed significant transformations over the past decades, particularly with the advent of active teaching methodologies. However, despite these advancements, the traditional theoretical assessment methods have remained largely unchanged. This lack of evolution in assessment systems poses a challenge, as it is crucial for assessment methods to evolve in tandem with teaching approaches to ensure a comprehensive and effective learning process in medical education. This paper reviews the integration and effectiveness of open-book examinations (OBEs) in medical education, reflecting their growing significance. An integrative review of the literature was conducted, drawing from a range of relevant publications over the last decade, sourced from databases such as PubMed, Web of Science, Scopus, and ERIC. The inclusion criteria focused on full-text articles in English, with search terms including "medicine," "assessment," "open book examination," "open book exam," and "open book assessment," combined using Boolean operators. Thirteen publications were selected and critically appraised using The Critical Appraisal Skills Program checklist. The analysis identified three primary thematic categories: ' Teaching Strategy for Pandemic and Challenging Conditions,” Tool of Learning & Educational Impact” and “Operational Challenges & Future Directions”. These themes were explored to understand the role and impact of OBEs in medical education. The findings indicate that open-book examinations are a crucial component in the evolving landscape of medical education. While certain reservations remain, OBEs have shown significant potential in fostering critical thinking, argumentation skills, and lifelong learning among medical students. They reflect the ongoing evolution of knowledge in the medical field and contribute to the development of professionals’ adept at navigating and applying complex information. Further research is recommended to solidify these findings and to expand the understanding of OBEs in medical education.

We introduce Get Free Copy (getfreecopy.com), a web-based platform designed to streamline the search for biomedical literature across major repositories like arXiv, bioRxiv, medRxiv, and PubMed Central (PMC). Addressing challenges posed by paywalls and fragmented databases, it offers a unified interface for efficient retrieval of free, legitimate copies of biomedical literature. The platform's implementation involves a Node.js backend and dynamic front-end display, enhancing accessibility and research efficiency. As an open-source project, Get Free Copy represents a significant contribution to the open-access movement, inviting global researcher collaboration for further development.

The acoustic conditions of open-plan office spaces influence wellbeing and productivity perceived by users, but with an inadequate evaluation for workspace, acoustic design in open-plan offices can be a factor that alters user performance. Such is the case in Mexico, where there are no adequate standards to evaluate specific acoustic conditions such as intelligibility. For this reason, this case study aims to evaluate different types of measurement methods for intelligibility. This study was carried out in a university in northern Mexico. The sound measurements were based on the Mexican standard for noise analysis and the ISO 3382- part 3 standards for acoustic measurements for open-plan offices. The psychoacoustic parameters evaluated were Reverberation and Intelligibility, using objective methods determined on S/N and subjective methods based on loss of consonant; where it was analyzed distance between sound source and zones classified by building design characteristics. The results indicated in which points the intelligibility effects increased, observing that Reverberation remained stable in this office, and that the subjective methods presented greater size of the measured sound effect than the objective methods. This finding establishes that subjective methods conformed to Lognormal behavior, which is applicable to other linguistic elements describing speech behavior.

Forest recreation can be successfully used for the psychological relaxation of respondents and can be used as a remedy for common problems with stress. The special form of forest recreation intended for restoration is forest bathing. These activities might be distracted by some factors, such as viewing buildings in the forest or using a computer in nature, which interrupt psychological relaxation. One factor that might interrupt psychological relaxation is the occurrence of an open dump in the forest during an outdoor experience. To test the hypothesis that an open dump might decrease psychological relaxation, a case study was planned that used a randomized, controlled crossover design. For this purpose, two groups of healthy young adults viewed a control forest or a forest with an open dump in reverse order and filled in psychological questionnaires after each stimulus. A pretest was used. Participants wore oblique eye patches to stop their visual stimulation before the experimental stimulation, and the physical environment was monitored. The results were analyzed using the two-way repeated measures ANOVA. The measured negative psychological indicators significantly increased after viewing the forest with waste, and the five indicators of the Profile of Mood States increased: Tension-Anxiety, Depression-Dejection, Anger-Hostility, Fatigue, and Confusion. In addition, the negative aspect of the Positive and Negative Affect Schedule increased in comparison to the control and pretest. The measured positive indicators significantly decreased after viewing the forest with waste, the positive aspect of the Positive and Negative Affect Schedule decreased, and the Restorative Outcome Scale and Subjective Vitality scores decreased (in comparison to the control and pretest). The occurrence of an open dump in the forest might interrupt a normal restorative experience in the forest by reducing psychological relaxation. Nevertheless, the mechanism of these relevancies is not known, and thus, it will be further investigated. In addition, in a future study, the size of the impact of these open dumps on normal everyday experiences should be investigated. It is proposed that different mechanisms might be responsible for these reactions; however, the aim of this manuscript is to only measure this reaction. The identified psychological reasons for these mechanisms can be assessed in further studies.

In December 2012, DOAJ’s parent company, IS4OA, announced they would introduce new criteria for inclusion in DOAJ [1] and that DOAJ would collect vastly more information from journals as part of the accreditation process – and that journals already included, would need to reapply in order to be kept in the registry. My hypothesis was that the journals removed from DOAJ on May 9th 2016 would chiefly be journals from small publishers (mostly single journal publishers) and that DOAJ journal metadata information would reveal that they were journals with a lower level of publishing competence than those that would remain in the DOAJ. Among indicators of publishing competence could be the use of APCs, permanent article identifiers, journal licenses, article level metadata deposited with DOAJ, archiving policy/solutions and/or having a policy in SHERPA/RoMEO. The analysis shows my concerns to be correct.

Chemistry is the last natural science discipline to embrace prepublishing, namely the publication of non-peer reviewed scientific articles on the internet. After a brief insight into the origins and the purpose of prepublishing in science, we conduct a concrete analysis of the concrete situation, aiming at providing an answer to several questions. Why the chemistry community has been late in embracing prepublishing? Is this in relation with the slow acceptance of open access publishing by the same community? Will prepublishing become a common habit also for chemistry scholars?

Fintech facilitates financial inclusion by introducing new sustainable and accessible business models in developing countries. Open banking API technology is used by various fintech businesses in both developing and developed countries, with varying effects on financial markets. It changes the financial market distribution structure by separating financial product manufacturing and distribution and intensifying competition between traditional financial institutions and fintech companies. Fintech companies innovate by using this tool to create new business models. In December 2019, Korea established a standardized "open banking API platform," sharing an interbank payment network with fintech companies. It has since shown explosive growth, surpassing the trading volume of the UK, the country that introduced open banking APIs for the first time. This study analyzes new business models fintech companies created using this API technology. Based on existing literature, statistics from the platform operator (the Korea Financial Telecommunications and Clearings Institute), and investigations of 30 Korean fintech mobile applications, this study analyzes new fintech business models that provide financial services using this platform. These companies create sustainable business models by combining multiple APIs. Four representative business models (simple funds transfer, simple payment, cross-border remittance, and asset management) are analyzed to reveal how fintech companies create business models with open APIs.

Due to resource constraints, most Diamond Open Access journals publish less than 25 articles per year, and 75% of journals are not able to provide their content in XML and HTML, primarily providing only PDFs (Bosman et al., 2021, p. 7-8). In order to keep up with larger commercial publishers, a high degree of automation and streamlining of processes is necessary. The Open Source Academic Publishing Suite (OS-APS) project funded by the German Federal Ministry of Education and Research aims to achieve this. OS-APS automatically extracts the underlying XML from Word manuscripts and offers optimization and export options in various formats (PDF, HTML, EPUB). The professional corporate design, e.g., of the PDFs, is managed automatically by using templates or creating one's own using a Template Development Kit. OS-APS will also connect to scholarly-led and community-driven publishing platforms such as Open Journal Systems (OJS), Open Monograph Press (OMP), and DSpace: the software will be able to be integrated into a wide range of publication processes, whether at small, low-resource commercial Open Access Publishers, or institutional and Diamond Open Access Publishers. References: Bosman, J., Frantsvåg, J. E., Kramer, B., Langlais, P.‑C., & Proudman, V. (2021). Oa Diamond Journals Study. Part 1: Findings. https://doi.org/10.5281/zenodo.4558703

The study investigated the usage of open data in public organizations, focusing on the motives, preferences, and governance ideals that determine their quality. The study shed light on how open data platforms are created and improved, as well as their influence on government operations. The primary goal was to understand the motivations behind the usage of open data, evaluate gov-ernance ideals, and examine institutions' efforts to standardize data formats. Hierarchical regres-sion analysis divides variables into core reasons and different preferences, demonstrating a need for "diversification" in order to use open data effectively. Efficiency, accountability, community impact, knowledge, and high-quality service delivery are all emphasized in governance value analysis. The institution's dedication to standardizing open data formats is evidenced by legislative measures and the integration of many technologies. The findings illustrate the institution's dual strategy of em-ploying traditional techniques and new technologies for effective data management. The report suggests increasing data openness and standardization, investing in ongoing training, upgrading alerting and awareness systems, and adopting specific regulations for open data use. Monitoring and feedback techniques are critical for adjusting and refining open data services to satisfy de-velopment needs. This study adds to the scientific knowledge of open data use by highlighting important motives, preferences, and governance ideals. The offered guidelines provide practical insights for public organizations looking to improve their open data platforms by promoting openness, efficiency, and community participation.

To stabilize the Earth’s climate a large-scale transition is needed to non-carbon emitting renewable energy technologies like wind and solar energy. Although these renewable energy sources are now lower-cost than fossil fuels, their inherent intermittency make them unable to supply a constant load without storage. To address these challenges rechargeable electric batteries are currently the most promising option; however, their high capital costs limit current deployment velocities. To both reduce the cost as well as improve performance 3D printing technology has emerged as a promising solution. This literature review provides the state-of-the-art enhancements of battery properties with 3D printing including efficiency, mechanical stability, energy and power density, customizability and sizing, production process efficiency, material conservation and environmental sustainability as well as the progress in solid-state batteries. The principles, advantages, limitations, and recent advancements associated with the most common types of 3D printing are reviewed focusing on their contributions to the battery field. 3D printing batteries offer design flexibility, material flexibility, reduces pack weight, minimizes material waste, increases the range of applications and has the potential to reduce costs. As 3D printing technologies become more accessible, the prospect of cost-effective production for customized batteries is extremely promising.

Boost-derived converters are most popular in Power Factor Correction AC-DC conversion applications and alternative energy generation systems. The proper operation of such converters relies on housekeeping power supplies providing auxiliary power for their control circuitry. The purpose of this study is to present a design-oriented analysis of a simple, passive, isolated, self-bias circuit that can provide a stabilized voltage for the control circuits of boost-derived converters. The circuit’s output voltage inherently follows the main regulated output and therefore, does not require an additional active control. The paper presents a detailed analysis of the circuit and offers design guidelines. Following the presentation of the basic idea several variations of the circuit, that can be used in special applications, are presented. The feasibility of the proposed bias circuits was verified by simulation and experiment on a laboratory prototype.

Abstract: For the problem of small target of printed circuit board surface defects and low detection accuracy, the printed circuit board surface defect detection network DCR-YOLO is designed to meet the premise of real-time detection speed and effectively improve the detection accuracy. Firstly, the backbone feature extraction network DCR-backbone, consisting of two CR residual blocks and one common residual block, is used for small target defect extraction on printed circuit boards. Secondly, the SDDT-FPN feature fusion module is responsible for the fusion of high level features to low level features, while enhancing feature fusion for the feature fusion layer where the small target prediction head YOLO Head-P3 is located to further enhance the low level feature representation. the PCR module enhances the feature fusion mechanism between the backbone feature extraction network and the SDDT-FPN feature fusion module at different scales of feature layers. the C5ECA module is responsible for adaptive adjustment of feature weights and adaptive attention to the requirements of small target defect information, further enhancing the adaptive feature extraction capability of the feature fusion module. Finally, three YOLO-Heads are responsible for predicting small target defects for different scales. Experiments show that the DCR-YOLO network model detection Map reaches 98.58%, the model size is 7.73MB, which meets the lightweight requirement, and the detection speed reaches 103.15fps, which meets the application requirements for real-time detection of small target defects.

Deep learning is improving by leaps and bounds in remote sensing images (RSIs) analysis, pre-trained convolutional neural networks (CNNs) have shown remarkable performance in remote sensing image scene classification (RSISC). Nonetheless, pre-trained CNNs require massive annotated data as samples for data training. When labeled samples are not sufficient, the most common solution is to the pre-trained CNNs using a great deal of natural image dataset (e.g. ImageNet). However, these pre-trained CNNs require a large quantity of labelled data for training, which is often not feasible in RSISC, especially when the target RSIs have different imaging mechanisms from RGB natural images. In this paper, we proposed an improved hybrid classical-quantum transfer learning CNNs composed of classical and quantum elements to classify open-source RSI dataset. The classical part of the model is made up of a ResNet network which extracts useful features from RSI datasets. To further refine the network performance, a tensor quantum circuit is subsequently employed by tuning parameters on near-term quantum processors. We tested our models on open-source RSI dataset. In our comparative study, we have concluded that the hybrid classical-quantum transferring CNN has achieved better performance than other pre-trained CNNs based RSISC methods with small training samples. Moreover, it has been proved that the proposed algorithm improves the classification accuracy while greatly decreasing sum of model parameters and sum of training data.

The aim of the study was to find the effect of polyethylene (PE) coatings on the short-circuit current of silicon photovoltaic cells covered with glass, in order to improve the short-circuit current of the cells. Various combinations of PE films (thicknesses ranging from 9 to 23 µm, number of layers ranging from 2 to 6) with glasses (greenhouse, float, optiwhite and acrylic glass) were investigated. The best current gain of 4.05% was achieved for the coating combining a 1.5 mm-thick acrylic glass with 2 × 12 µm-thick PE films. This effect can be related to the formation of an array of micro-wrinkles and micrometer-sized air bubbles with a diameter of 50 to 600 µm in the films, which serve as micro-lenses and enhance light trapping.

The integrated DC-DC converter is appropriate for use in many domains, namely, display, cellular, and portable applications. This paper presents an integrated monolithic voltage-mode DC-DC boost converter with a low-power control circuit. The driver circuit requires an integrated converter to power up a digital logic circuit and converts the unregulated DC input to the controlled DC output at the desired voltage level. It is the integration of both power switches and control circuitry within the same CMOS technology to buck down and boost voltages using a switch mode regulator. In order to increase power efficiency in the DC-DC boost converter that provides low-power operation with a small chip size, a low-voltage operation is applied to the unique circuit characteristic. The operational transconductance amplifier(OTA), comparator, and oscillator in the control circuit are designed with the supply voltage of 3.3V and the operating frequency of 5.5 MHz. A compensator is used to create a pole that has sufficient phase margin for high stability. The DC- DC boost converter is measured in both experiment and simulation. Testing of the proposed circuit on the 0.35μm CMOS process shows that the output transient time of the amplifier can be controlled within of 7μsec and the output voltage is accurately controlled with a ripple ratio of 3%.

This paper considers the principles of building a circuit model of film resistor cutting. The conductive resistive medium is defined with the component equations and the topology of the circuit model. A method of estimating the electric parameters of a resistor operating in the system with a measuring voltage source is shown. An equation system for the node voltages is defined, and the resistive layer parameters are analyzed as the circuit model structure changes during the cutting process.

With the development of designing and manufacturing level for micro-electromechanical system (MEMS) gyroscopes, the control circuit system becomes a key point to determine their internal performances. Nevertheless, phase delay of electron components may result in some serious hazards. This paper describes a real-time circuit phase delay correction system for MEMS vibratory gyroscopes. A detailed theoretical analysis is provided to clarify the influences of circuit phase delay on the in-phase and quadrature (IQ) coupling characteristics and zero rate output (ZRO) utilizing force-to-rebalance (FTR) closed-loop detection and quadrature correction system. By deducing the relationship between amplitude-frequency, phase-frequency of MEMS gyroscope and the phase relationship of the whole control loop, a real-time correction system is proposed to automatically adjust the phase reference value of phase-locked loop (PLL) and thus compensate for the real-time circuit phase delay. The experimental results show that the correction system can accurately measure and compensate the circuit phase delay in real time. Furthermore, the unwanted IQ coupling can be eliminated and the ZRO is decreased by 755% to 0.095°/s. This correction system realizes a small angle random walk of 0.978°/√h, and a low bias instability of 9.458°/h together with a scale factor nonlinearity of 255 ppm at room temperature. Besides, the thermal drift of ZRO is reduced to 0.0034°/s/°C at a temperature range from -20°C to 70°C.

We demonstrate fabrication of single-mode optical waveguides on lithium niobate on insulator (LNOI) by optical patterning combined with chemo-mechanical polishing. The fabricated LNOI waveguides have a nearly symmetric mode profile of a mode field size of ~2.5 µm (full-width at half maximum). We develop a high-precision measurement approach by which the single mode waveguides are characterized to have a propagation loss of ~0.042 dB/cm.

We report fabrication of a multifunctional photonic integrated chip on lithium niobate on insulate (LNOI), which is achieved by femtosecond laser assisted chemo-mechanical polish. We demonstrate a high extinction ratio beam splitter, a 1 × 6 optical switch, and a balanced 3 × 3 interferometer on the fabricated chip by reconfiguring the microelectrode array integrated with the multifunctional photonic circuit.

This paper consists of the design and implementation of a simple conditioning circuit to optimize the electronic nose performance, where a temperature modulation method was applied to the heating resistor to study the sensor’s response and confirm whether they are able to make the discrimination when exposed to different volatile organic compounds (VOC’s). This study was based on determining the efficiency of the gas sensors with the aim to perform an electronic nose, improving the sensitivity, selectivity and repeatability of the measuring system, selecting the type of modulation (e.g., pulse width modulation) for the analytes detection (i.e., Moscatel wine samples (2% of alcohol) and ethyl alcohol (70%)). The results demonstrated that by using temperature modulation technique to the heating resistors, it is possible to realize the discrimination of VOC’s in fast and easy way through a chemical sensors array. Therefore, a discrimination model based on principal component analysis (PCA) was implemented to each sensor, with data responses obtaining a variance of 94.5% and accuracy of 100%.

As a new kind of highly compact and efficient micro-channel heat exchanger, printed circuit heat exchanger (PCHE) is a promising candidate satisfying the heat exchange requirements of liquefied natural gas (LNG) vaporization at low and high pressure. The effects of airfoil fin arrangement on heat transfer an flow resistance were numerically investigated using supercritical liquefied natural gas (LNG) as a working fluid. The thermal properties of supercritical LNG were tested by utilizing a REFPROF software database. Numerical simulation was performed using FLUENT. The inlet temperature of supercritical LNG was 121 K,and its pressure was 10.5MPa. The reference mass flow rate of LNG was set 1.22 g/s for the vertical pitch L_v = 1.67 mm and the staggered pitch L_s = 0 mm, with the Reynolds number of about 3750. The SST k-ω model with enhanced wall treatment was selected by comparing with the experimental data. The airfoil fin PCHE had better thermal-hydraulic performance than that of the straight channel PCHE. Moreover, the airfoil fins with staggered arrangement displayed better thermal performance than that of the fins with parallel arrangement. The thermal-hydraulic performance of airfoil fin PCHE was improved with increasing L_s and L_v. Moreover, L_v affected on the Nusselt number and pressure drop of airfoil fin PCHE more obviously. In conclusion, a sparser staggered arrangement of fins showed a better thermal-hydraulic performance in airfoil fin PCHE.

In this paper, an original approach allowing the determination of the iron losses in the electromagnetic devices is presented. This new approach exploits the Loss Surface (LS) hysteresis model and the magnetic flux density waveforms resulting from a generalized nonlinear adaptive magnetic equivalent circuit (MEC) using a mesh-based formulation in two-dimensional (2-D) or quasi three-dimensional (3-D). The model coupling has been applied to a 18-slots/16-poles radial-flux interior permanent-magnet (PM) synchronous machine (PMSM) dedicated to automotive applications, mainly for electric/hybrid/fuel cell vehicles (EVs/HEVs/FCVs). The obtained results have been compared with those made retrospectively in the 2-D transient finite-element (FE) Flux. The influence of the MEC discretization on the iron loss calculation and the electromagnetic performances has been analyzed. The computation time is divided by 3/2 with an error less than 7 %.

Thermal sterilization is generally avoided for 3-D printed components because of the relatively low deformation temperatures for common thermoplastics used for material extrusion-based additive manufacturing. 3-D printing materials required for high-temperature heat sterilizable components for COVID-19 and other applications demands 3-D printers with heated beds, hot ends that can reach higher temperatures than polytetrafluoroethylene (PTFE) hot ends and heated chambers to avoid part warping and delamination. There are several high temperature printers on the market, but their high costs make them inaccessible for full home-based distributed manufacturing required during pandemic lockdowns. To allow for all these requirements to be met for under $1,000, the Cerberus – an open source three-headed self-replicating rapid prototyper (RepRap) was designed and tested with the following capabilities: i) 200^oC-capable heated bed, ii) 500^oC-capabel hot end, iii) isolated heated chamber with 1kW space heater core and iv) mains voltage chamber and bed heating for rapid start. The Cereberus successfully prints polyetherketoneketone (PEKK) and polyetherimide (PEI, ULTEM) with tensile strengths of 77.5 and 80.5 MPa, respectively. As a case study, open source face masks were 3-D printed in PEKK and shown not to warp upon widely home-accessible oven-based sterilization.

Walking of humanoid robots is dependent on precise tracking of the center of gravity and foot trajectories. Trajectory tracking is achieved by mobilizing the robot joints to produce the correct trajectory. Errors are being occurred because of assumptions on tracking the center of gravity and the foot trajectories. In this study, a numerical algorithm has been developed that produces an exact and single kinematic solution in which the center of gravity and foot trajectories can be tracked with the desired precision. The effectiveness of the algorithm was examined with a dynamic simulation and compared with the method given in the literature The main highlight of this study, using the presented algorithm, the robot can walk even if the position of its center of gravity is lower than its hips, resulting tracking error was smaller than reported in the literature.

This study aimed to identify the most beneficial attitudes adopted by enterprise participants during their engagement in open-source software (OSS) activities. For this purpose, we selected repositories from GitHub, featuring the top 10 with the highest stars and forks, classified the participants according to their sentiment states, and compared their productivity. The results indicated that participants with positive sentiments were more productive than those with negative sentiments. Consequently, it can be inferred that encouraging organizations to express positive sentiments towards their developers publicly may stimulate OSS community activities and enhance productivity, thereby potentially leading to increased open innovation and sustainability.

This proposal describes the design and development of an interoperable application that supports green open access with long-term sustainability and improved user experience of article deposit. Introduction: The lack of library resources and unfriendly repository user interface are two significant barriers that hinder green open access. Tasked to implement the open access mandate, librarians at an American research university developed a comprehensive system called Easy Deposit 2 to automate the support workflow of green open access. Implementation: Easy Deposit 2 is a web application that is able to harvest newly publications, outreach for manuscript on behalf of the library, and facilitate self-archiving to IR. It is developed and maintained by the library and integrated with the IR. Results and Discussion: The article deposit rate is about 25% with Easy Deposit 2, which increases significantly comparing to the previous period. It also serves as a local database for faculty publications with open access status. The lesson learned is that library cannot rely on a single commercial provider for publication data due to mismatched priorities. Conclusion: Recent IT developments provides new opportunities of innovation like Easy Deposit 2 in supporting open access. Academic librarians are vital in promoting "openness" in scholarly communication such as transparency and diversity in the sharing of publication data.

The number of documents published on the Web other languages than English grows every year. As a consequence, it increases the necessity of extracting useful information from different languages, pointing out the importance of researching Open Information Extraction (OIE) techniques. Different OIE methods have been dealing with features from a unique language. On the other hand, few approaches tackle multilingual aspects. In such approaches, multilingual is only treated as an extraction method, which results in low precision due to the use of general rules. Multilingual methods have been applied to a vast amount of problems in Natural Language Processing achieving satisfactory results and demonstrating that knowledge acquisition for a language can be transferred to other languages to improve the quality of the facts extracted. We state that a multilingual approach can enhance OIE methods, being ideal to evaluate and compare OIE systems, and as a consequence, to applying it to the collected facts. In this work, we discuss how the transfer knowledge between languages can increase the acquisition from multilingual approaches. We provide a roadmap of the Multilingual Open IE area concerning the state of the art studies. Additionally, we evaluate the transfer of knowledge to improve the quality of the facts extracted in each language. Moreover, we discuss the importance of a parallel corpus to evaluate and compare multilingual systems.

Universities, like cities, have embraced novel technologies and data-based solutions to improve their campuses with ‘smart’ becoming a welcomed concept. Campuses in many ways are small-scale cities. They increasingly seek to address similar challenges and to deliver improved experiences to their users. How can data be used in making this vision a reality? What can we learn from smart campuses that can be scale up to smart cities? A short research study was conducted over a three-month period at a public university in the United Kingdom employing stakeholder interviews and user surveys, aiming at gaining insight into these questions. Based on the study, the authors suggest that making data publicly available could bring many benefits to different groups of stakeholders and campus users. These benefits come with risks and challenges such as data privacy and protection and infrastructure hurdles. However, if these challenges can be overcome, open data could contribute significantly to improving campuses and user experiences, and potentially set an example for smart cities.

This paper explores whether preprints can better support open science by providing links to other early-stage research outputs. This potentially has benefits for transparency and discoverability of research projects. By looking at preprint submission systems, online preprints and surveying those who run preprint servers, I examined to what extent this is currently possible. No preprints server provided a complete service, however many allowed the linking of several open science elements from the abstract page. I looked at variation based on subject, age, and size of preprint server. In conclusion, authors posting preprints should consider the options provided by different preprint servers. It appears that open science is just one focus of preprint servers and further improvements will be dependent on preprint server policies and priorities rather than overcoming any technical difficulties.

The implementation of the European Cohesion Policy aiming at fostering regions competitiveness, economic growth and creation of new jobs is documented over the period 2014–2020 in the publicly available Open Data Portal for the European Structural and Investment funds. On the base of this source, this paper aims at describing the process of data mining and visualization for information production on regional programmes performace in achieving effective expenditure of resouces.

Network effects, economies of scale, and lock-in-effects increasingly lead to a concentration of digital resources and capabilities, hindering the free and equitable development of digital entrepreneurship (SDG9), new skills, and jobs (SDG8), especially in small communities (SDG11) and their small and medium-sized enterprises (“SMEs”). To ensure the affordability and accessibility of technologies, promote digital entrepreneurship and community well-being (SDG3), and protect digital rights, we propose data cooperatives [1,2] as a vehicle for secure, trusted, and sovereign data exchange [3,4]. In post-pandemic times, community/SME-led cooperatives can play a vital role by ensuring that supply chains to support digital commons are uninterrupted, resilient, and decentralized [5]. Digital commons and data sovereignty provide communities with affordable and easy access to information and the ability to collectively negotiate data-related decisions. Moreover, cooperative commons (a) provide access to the infrastructure that underpins the modern economy, (b) preserve property rights, and (c) ensure that privatization and monopolization do not further erode self-determination, especially in a world increasingly mediated by AI. Thus, governance plays a significant role in accelerating communities’/SMEs’ digital transformation and addressing their challenges. Cooperatives thrive on digital governance and standards such as open trusted Application Programming Interfaces (APIs) that increase the efficiency, technological capabilities, and capacities of participants and, most importantly, integrate, enable, and accelerate the digital transformation of SMEs in the overall process. This policy paper presents and discusses several transformative use cases for cooperative data governance. The use cases demonstrate how platform/data-cooperatives, and their novel value creation can be leveraged to take digital commons and value chains to a new level of collaboration while addressing the most pressing community issues. The proposed framework for a digital federated and sovereign reference architecture will create a blueprint for sustainable development both in the Global South and North.

The potential of metallic lithium to become the anode material for next-generation batteries is hampered by significant challenges, chief among which is dendrite growth during battery charging. These dendritic structures not only impair battery performance but also pose safety risks. Among the non-destructive analytical techniques in battery research, Magnetic Resonance Imaging (MRI) stands out as a promising tool. However, the direct imaging of lithium by 7Li MRI is hindered by its low sensitivity and spatial resolution, making its use for of dendritic growth imaging very difficult. Instead, a recently introduced indirect imaging approach based on 1H MRI of the electrolyte was used in this study. This method was used for sequential 3D imaging to monitor the charging process of lithium metal symmetric cells in three different electrical circuits: single cell, four cells in parallel, four cells in series. The measured sequential images allowed measurement of dendrite growth in each cell using volumetric analysis. The growth results confirmed the theoretical expectation that growth across cells is uneven in a parallel circuit and even in a series circuit. The methods presented in this study can be applied also to many other dendrite-related issues in batteries.

In steel recycling, the optimization of electric arc furnaces (EAFs) is of central importance in order to increase efficiency and reduce costs. This study focuses on the optimization of electric arcs, which make a significant contribution to the energy consumption of EAFs. A three-phase equivalent circuit integrated with the Cassie-Mayr arc model is used to capture the nonlinear and dynamic characteristics of arcs, including arc breakage and ignition process. A particle swarm optimization technique is applied to real EAF data containing current and voltage measurements to estimate the parameters of the Cassie-Mayr model. A novel Arc Quality Index (AQI) is introduced in the study, which can be used to evaluate arc quality based on deviations from optimal conditions. The AQI provides a qualitative assessment of arc quality, analogous to indices such as arc coverage and arc stability. The study concludes that the AQI serves as an effective operational tool for EAF operators to optimize production and increase the efficiency and sustainability of steel production. The results underline the importance of understanding electric arc dynamics for the development of EAF technology.

Recent biotechnological innovations make feasible the new paradigm of creating biological neural circuits de novo. With advances in protein, cell and tissue engineering techniques, as well as cellular reprogramming methods, we are entering an era where the construction of neural circuits can open completely new ways for studying nervous systems and for treating nervous system disorders. I explore here three technologies, namely cellular engraftment, neuronal reprogramming and transsynaptic molecule engineering, and delineate how they are being used in a variety of basic research and translational medicine contexts. In basic neuroscience, neural circuit construction methods are enabling ways to study causality in neural development (e.g. neural precursor differentiation and migration) and circuit function (e.g. excitation/inhibition balance, neural population dynamics). In translational neuroscience, they are providing opportunities for the targeted correction of circuit malfunction in brain disorders, both psychiatric (e.g. schizophrenia) and neurological (e.g. Parkinson’s, Huntington’s and Alzheimer’s disease, as well as epilepsy). I discuss the challenges that these methods currently face, such as targeting specificity and cell survival, and outline future paths and opportunities to realize the full potential of technologies for creating new biological neural circuits.

Open science, accessibility and knowledge sharing, especially of articles and monographs stemming from a publicly funded research, seem to be quite a positive direction in the development of science and have received almost unanimous approval from a scientific community. However, when it comes to data sharing, the data obtained by qualitative methodology deserve special attention and treatment. Although FAIR principles provide ways to anonymise the data and interlocoutors (as explained in Celjak et al 2020) individuals coming from smaller communities or even communities of practice can sometimes be easily regcognized by members of the same communitiy, especially if the data refers to audio files! The researcher is obliged to thoroughly describe the ways in which the data will be managed and used, and if it will state that the data will be managed in line with FAIR principles, this will inevitably impact the narratives collected. The prerogative to make all the data open will inevitably lead to autocesorship i.e. in creating a kind of FAIRy Tales for the future, interlocutors will share with researchers. Having all that in mind I argue for a more vigilant approach when embracing the idea that all the data should be made FAIR. Not all the data should be made FAIR because this could, in the end, compromise the research process itself. Some data must remain in the space of trust created between main actors in the research process. These data should be treated with CARE principles.

Centrifuges are commonly required devices in medical diagnostics facilities as well as scientific laboratories. Although there are commercial and open source centrifuges, costs of the former and required electricity to operate the latter, limit accessibility in resource-constrained settings. There is a need for low-cost, human-powered, verified and reliable lab-scale centrifuge. This study provides the designs for a low-cost 100% 3-D printed centrifuge, which can be fabricated on any low-cost RepRap-class fused filament fabrication (FFF) or fused particle fabrication (FPF)-based 3-D printer. In addition, validation procedures are provided using a web camera and free and open source software. This paper provides the complete open source plans including instructions for fabrication and operation for a hand-powered centrifuge. This study successfully tested and validated the instrument, which can be operated anywhere in the world with no electricity inputs obtaining a radial velocity of over 1750rpm and over 50N of relative centrifugal force. Using commercial filament the instrument costs about US$25, which is less than half of all commercially available systems; however, the costs can be dropped further using recycled plastics on open source systems for over 99% savings. The results are discussed in the contexts of resource-constrained medical and scientific facilities.

Visits to coastal and inland-waterways have strong associations with many health and economic benefits but are also opportunities for exposure to environmental pollution. In England, few balanced survey samples exist which can facilitate accurate identification of correlates with recreation in blue spaces. This information could support risk assessment for likelihood of exposure and message targeting in case of environmental threats. We process data from a recent (2022-2023) and large (n = 177,551) survey of English residents to describe demographic, seasonal and regional correlates with any participation in water-based recreational activities in previous year (logistic regression model), and in the previous 28 days (zero-inflated negative binomial regression). Activities studied were: surfing and paddleboarding; open water swimming; scuba-diving and snorkelling; canoeing and kayaking; angling. Summer was associated with most frequent participation, winter with fewest sessions except for rowing. Anglers were group most likely to be socially vulnerable: less likely to be university educated, more likely to be disabled and especially likely to be male. People resident in rural locations were more likely to participate at least once in prior year, but did not have higher participation rates in the previous 28 days. Regional variations in specific activities may suggest where demand for water recreation is unmet. The results provide a reference description of outdoor water-recreationalists doing specific types of activity in England and may be useful when designing emergency messages and otherwise setting policy with regard to management of microbiological, radiological or chemical hazards in coastal and inland waters.

Untargeted metabolomics is a powerful tool for measuring and understanding complex biological chemistries. However, employment, bioinformatics and downstream analysis of mass spectrometry (MS) data can be daunting for inexperienced users. Numerous open-source and free-to-use data processing and analysis tools exist for various untargeted MS approaches, including liquid chro-matography (LC), but choosing the ‘correct’ pipeline isn’t straight-forward. This tutorial, in con-junction with a user-friendly online guide presents a workflow for connecting these tools to process, analyse and annotate various untargeted MS datasets. The workflow is intended to guide explor-atory analysis in order to inform decision-making regarding costly and time-consuming down-stream targeted MS approaches. We provide practical advice concerning experimental design, organisation of data and downstream analysis, and offer details on sharing and storing valuable MS data for posterity. The workflow is editable and modular, allowing flexibility for updated/ changing methodologies and increased clarity and detail as user participation becomes more common. Hence, the authors welcome contributions and improvements to the workflow via the online repository. We believe that this workflow will streamline and condense complex mass-spectrometry approaches into easier, more manageable, analyses thereby generating opportunities for researchers previously discouraged by inaccessible and overly complicated software.

There is great current interest in systems represented by non-Hermitian Hamiltonians, including a wide variety of real systems that may be dissipative and whose behaviour can be represented by a "phase" parameter that characterises the way "exceptional points" (singularities of various sorts) determine the system. These systems are briefly reviewed with an emphasis on their geometrical thermodynamics properties.

There is great current interest in systems represented by non-Hermitian Hamiltonians, including a wide variety of real systems that may be dissipative and whose behaviour can be represented by a "phase" parameter that characterises the way "exceptional points" (singularities of various sorts) determine the system. These systems are briefly reviewed with an emphasis on their geometrical thermodynamics properties.

Microalgae biomass is a budding raw material for the origination of food, fuel, and other value-added products. However, bulk production of microalgal biomass at commercial level is a herculean task for the current microalgal mass production technologies due to the undesirable contaminations by biological pollutants. These contaminants hamstring the production of microalgae biomass by debilitating the growth of cultures, crumble the quality of biomass and sometimes may crash the whole culture. The best utilization of the microalgae biomass at industrial level could be attained by avoiding various possible biological contaminations in mass cultivation system, understanding the contamination mechanisms, and the complex interactions of algae with other microorganisms. This review explores the various types of biological pollutants, their possible mode of infection along with mechanisms, different controlling methods to maintain desired microalgae culture.

The Open Access (OA) publishing model that is based on article processing charges (APC) is often associated with the potential for more transparency regarding the expenditures for publications. However, the extent to which transparency can be achieved depends not least on the completeness of data in APC monitoring systems. This article investigates two blind spots of the largest collection of APC payment information, OpenAPC. It aims to identify likely APC-liable publications for German universities that contribute to this system and for those that do not provide data to it. The calculation combines data from Web of Science, the ISSN-Gold-OA-list and OpenAPC. The results show that for the group of universities contributing to the monitoring system, more than half of the APC payments are not covered by it and the average payments for non-covered APCs is higher than for APCs covered by the system. In addition, the group of universities that does not contribute to OpenAPC accounts for two thirds of the number of APC-liable publications recorded for contributing universities. Regarding the size of these blind spots, the value of the monitoring system is limited at present.

This paper presents the validation of the End Point Rate (EPR) tool for QGIS (EPR4Q), a tool built-in QGIS Graphical Modeler to calculate the shoreline change by End Point Rate method. The EPR4Q tries to fill the gap of user-friendly and free open-source tool for shoreline analysis in Geographic Information System environment, since the most used software - Digital Shoreline Analysis System (DSAS) - although is a free extension, is suited for commercial software. Besides, the best free open-source option to calculate EPR called Analyzing Moving Boundaries Using R (AMBUR), since it is a robust and powerful tool, the complexity and heavy processes can restrict the accessibility and simple usage. The validation methodology consists of applying the EPR4Q, DSAS, and AMBUR on different examples of shorelines found in nature, extracted from the U.S. Geological Survey Open-File. The obtained results of each tool were compared with Pearson correlation coefficient. The validation results indicate that the EPR4Q tool created acquired high correlation values with DSAS and AMBUR, reaching a coefficient of 0.98 to 1.00 on linear, extensive, and non-extensive shorelines, guarantying that the EPR4Q tool is ready to be freely used by the academic, scientific, engineering, and coastal managers communities worldwide.

Introduction: The Pandemic of COVID-19, an infectious disease caused by SARS-CoV-2 motivated the scientific community to work together in order to gather, organize, process and distribute data on the novel biomedical hazard. Here, we analyzed how the scientific community responded to this challenge by quantifying distribution and availability patterns of the academic information related to COVID-19. The aim of our study was to assess the quality of the information flow and scientific collaboration, two factors we believe to be critical for finding new solutions for the ongoing pandemic. Materials and methods: The RISmed R package, and a custom Python script were used to fetch metadata on articles indexed in PubMed and published on Rxiv preprint server. Scopus was manually searched and the metadata was exported in BibTex file. Publication rate and publication status, affiliation and author count per article, and submission-to-publication time were analysed in R. Biblioshiny application was used to create a world collaboration map. Results: Our preliminary data suggest that COVID-19 pandemic resulted in generation of a large amount of scientific data, and demonstrates potential problems regarding the information velocity, availability, and scientific collaboration in the early stages of the pandemic. More specifically, our results indicate precarious overload of the standard publication systems, significant problems with data availability and apparent deficient collaboration. Conclusion: In conclusion, we believe the scientific community could have used the data more efficiently in order to create proper foundations for finding new solutions for the COVID-19 pandemic. Moreover, we believe we can learn from this on the go and adopt open science principles and a more mindful approach to COVID-19-related data to accelerate the discovery of more efficient solutions. We take this opportunity to invite our colleagues to contribute to this global scientific collaboration by publishing their findings with maximal transparency.

Local thermal comfort (TC) and draught rate (DR) has been studied widely. There has been more meaningful research performed in controlled boundary condition situations than in actual work environments involving occupants. TC conditions in office buildings in Estonia have been barely investigated in the past. In this paper, the results of TC and DR assessment in five office buildings in Tallinn are presented and discussed. Studied office landscapes vary in heating, ventilation and cooling (HVAC) system parameters, room units and elements. All sample buildings were less than six years old, equipped with dedicated outdoor air ventilation system and room conditioning units. The on-site measurements consisted of TC and DR assessment with indoor climate questionnaire (ICQ). The purpose of the survey is to assess the correspondence between HVAC design and the actual situation. Results show, whether and in what extent the standard-based criteria for TC is suitable for actual usage of the occupants. Preferring one room conditioning unit type or system may not guarantee better thermal environment without draught. Although some HVAC systems observed in this study should create the prerequisites for ensuring more comfort, results show that this is not the case for all buildings in this study.

Over the last twenty years, library publishing has emerged in higher education as a new class of publisher. Conceived as a response to commercial publishing practices that have strained library budgets and prevented scholars from openly licensing and sharing their works, library publishing is both a local service program and a broader movement to disrupt the current scholarly publishing arena. It is growing both in numbers of publishers and numbers of works produced. The commercial publishing framework which determines the viability of monetizing a product is not necessarily applicable for library publishers who exist as a common good to address the needs of their academic communities. Like any business venture, however, library publishers must develop a clear service model and business plan in order to create shared expectations for funding streams, quality markers, as well as technical and staff capacity. As the field is maturing from experimental projects to full programs, library publishers are formalizing their offerings and limitations. The anatomy of a library publishing business plan is presented and includes the principles of the program, scope of services, and staffing and governance requirements. Other aspects include production policies, financial structures, and measures of success.

Based on the total scholarly article output of Norway, we investigated the coverage and degree of openness according to three bibliographic services 1) Google Scholar, 2) oaDOI by Impact Story and 3) 1findr by 1science. According to Google Scholar, we find that more than 70% of all Norwegian articles are openly available. However, degrees are profoundly lower according to oaDOI and 1findr, respectively 31% and 52%. Varying degrees are mainly caused by different interpretations of openness, with oaDOI being most restrictive. Furthermore, open shares vary considerably by discipline, with the Medcine and Health sciences at the upper and the Humanities at the lower end. We also determined the citation frequencies using Cited-by values as of Google Scholar, applying year and subject normalization. We find a significant citation advantage for open articles. However, this is not the case for all types of openness. In fact, the category Open Access journals was by far lowest cited, indicating that young journals with a declared open access policy still lack recognition.

The commercial equipment that carries out the measurement of temperature has a high cost. Therefore, this article describes the development of a temperature measurement equipment, which uses a microcontrolled platform, responsible for managing the data of the collected temperature signals and making available the acquired information, so that they can be verified in real time at the measurement site, or remotely. The construction of the temperature measurement equipment was performed using open platform hardware / software, where performance tests were carried out with the objective of developing a temperature measurement equipment that has measurement quality and low cost.

Dump design and scheduling are critical elements to effective mine planning, especially if several of them are required in large-scale open pit mines. Infrastructure capital and transportation costs are considerable from an early stage in the mining project, and through the life-of-mine as these dumps gradually become immense structures. Delivered mining rates, as well as certain spatial and physical constraints, provide a set of parameters of mathematical and economic relationship that creates opportunities for modelling and thus facilitates the measuring and optimization of ultimate dump design by using programming and empirical techniques while achieving economic objectives. This paper presents a methodology to model and optimize the design of a mine dump by minimizing the total haulage costs. The proposed methodology consists on: (i) Formulation of a dump model based on a system of equations relying on multiple relevant parameters; (ii) Solves by minimizing the total cost using linear programming and determines a ‘preliminary’ dump design; (iii) Through a series of iterations, modifies the ‘preliminary’ footprint by projecting it to the topography and creates the ultimate dump design. Finally, an example application for a waste rock dump illustrates this methodology.