Cropland area per capita and pressure index on cropland is the important parameters measuring the social vulnerability and sustainability in the perspective of food security in a certain region in China during the historical periods. This study reconstructs the spatial distribution change of cropland area per labor/household and pressure index on cropland during the 17th-20th century by the methods of historical documents, regression analysis, pressure index model and GIS. Then it analyzed the impacting process of climate change and sustainability of cropland use during the different periods. It draws conclusions: (i) the spatial difference of labor/household density was obvious which had the same pattern as cropland distribution during the same periods, which is higher density in three agricultural areas. (ii) Cropland area per capita was relatively higher during the 17th-18th century, which were above 0.4 ha/person in majority counties and distributed homogenously. Till the 19th century and the beginning of 20th century, cropland area per capita in large amount of regions decreased below 0.2 ha/person embodying the increase of social vulnerability and unsustainability at that time. (iii) Pressure index on cropland also showed the similar spatial pattern as cropland area per capita which presented lower threshold than nowadays. During the 17th-18th century there was no pressure on cropland. While, in the 19th century and at the beginning of 20th century, two high value centers of pressure index on cropland appeared in Middle Shandong and the Jiaodong region, pressure on sustainable cropland use increased obviously and a food crisis is probably created. (iv) Higher sustainable extent of cropland use corresponds to cold period, and lower sustainable extent of cropland use corresponds to warm period in Shandong over the past 300 years. The turning point of 1680s from dry to wet attributes to the decrease of sustainable extent of cropland use in Shandong not very distinctively. More and more pressure on sustainability of cropland use finally since the beginning of 20th century would intensify the social conflict and increase the probability of social revolts.

Abstract: Unusual methane emission and spontaneous combustion of coal induced by the air leakage are both hazards during mining. The most common practice has been to improve mine safety is sealing the mining fractures. In this paper, the methane and geology, coal spontaneous combustion characteristics and the coexistence of methane emission and spontaneous combustion of coal were analyzed. The preparation system of inorganic solidified foam (ISF) in field applications is studied and the working principle of generating device consists of foam generator and mixer was expounded. The technical plan of site construction is that the foam fluids was injected to respectively seal the mining fractures behind hydraulic supports, the cavities of air return corner, and the fractures nearby the coal pillar. After the foam fluids injection, the two stress values in the coal pillar eventually maintained above 15.5Mpa and 13Mpa, respectively. It indicated that the ISF can enhance the bearing stress ability of the coal pillar by transforming the stress state from two dimensional to three dimensional. The methane concentration in the air return corner and air return roadway declined significantly to 0.63% and 0.25%. The differential pressure inside and outside of the 4301(1) goaf fluctuated between -100pa to 150pa and the concentration of CO and O2 declined to 9ppm and 6%. The CO concentration in the air return corner finally reached a stable level of 6ppm. What that all means, the foam fluids can seal the air leakage and inhibit spontaneous combustion of coal effectively.

The article studies the Venetsiansky (Hydropark) Island (the Dnipro River, Kyiv, Ukraine) landscape structure applying the genetic landscape science method and the European landscape classification (LANMAP) approach. The aim of the article is to determine the best way to study the river islands landscapes analyzing the Venetsiansky Island landscape structure by the both methods. Methodology. The genetic landscape science method consists in the next steps: 1) the island’s territory information collecting; 2) the preliminary landscape map creating; 3) field study; 4) the final landscape map creating. The LANMAP method consists on: 1) the climate study; 2) the altitude study; 3) the parent material study; 4) the land cover study. The results. The genetic landscape science method demonstrates that the Venetsiansky Island is not a landscape, but a structural part of the landscape – the tract. The LANMAP study reveals that the Venetsiansky Island is naturally homogeneous, but land cover differs. The conclusion. The both methods’ study shows that the river island cannot be the entire landscape by the natural criteria, but only the part of it. The genetic landscape science explores the landscape forming while the LANMAP reveals the current state of the landscape.

The world has been highly impacted by the COVID-19 as the virus has spread to all continents – about 200 countries in total. The latest update claims about 4,000,000 confirmed cases and about 300,000 confirmed deaths owing to the COVID-19 pandemic. This probably makes the COVID-19 as the most dangerous contagious disease in the era 2000s. Apart from massive publications on this topic, there is no available qualitative analysis that describes the dynamic spreads of the COVID-19 and its impacts on healthcare and the economy. Through the system archetypes analysis, this paper explains that the dynamic spread of the COVID-19 consists of the limits to growth and the success to successful structures. The limits to growth elucidates that more symptomatic and asymptomatic patients owing to infected droplets may be bounded by self-healing and isolated treatments. The success to successful structure explains that once the COVID-19 affects the economy through the lockdown, there will be a limited fund to support the government aids and the aggregate demand. In overall, this paper gives readers simplified holistic insights into understanding the dynamic spread of the COVID-19.

In-wheel motor vehicles are gaining attention as a new type of electric vehicle due to their efficient power units located inside each wheel hub. However, they are more susceptible to wheel resonance due to the increase in unsprung mass caused by the motor's weight. This can result in decreased both the ride comfort and driving stability. To resolve this issue, this study aims to apply an optimal switching controller with a semi-active n actuator; magnetorheological (MR) damper. For the implementation of the optimal switching controller, a road type classification is also carried out. An acceleration sensor is used for road type classification, and control logics include a ride comfort controller; the linear quadratic regulator (LQR _Paved Road) and a wheel motion controller (LQR_Off Road) for improved driving stability. For paved roads, the LQR_Paved Road control input is applied to the MR damper. However, if a road type prone to wheel resonance is detected, the control logic switches to the LQR_Off Road. During the transition, a weighted average of both LQR_ Paved Road and LQR_Off Road control input is applied to the actuator. Computer simulations are undertaken to evaluate vibration control performance, including the ride comfort and driving stability at various road profiles.

Demand response flexible loads can provide fast regulation and ancillary services as reserve capacity in power systems. This paper proposes a joint optimization dispatch control strategy for source-load system with stochastic renewable power injection and flexible thermostatically controlled loads (TCLs) and plug-in electric vehicles (PEVs). Specifically, the optimization model is characterized by a chance constraint look-ahead programming to maximal the social welfare of both units and load agents. By solving the chance constraint optimization with sample average approximation (SAA) method, the optimal power scheduling for units and TCL/PEV agents can be obtained. Secondly, two demand response control algorithms for TCLs and PEVs are proposed respectively based on the aggregate control models of the load agents. The TCLs are controlled by its temperature setpoints and PEVs are controlled by its charging power such that the DR control objective can be fulfilled. The effectiveness of the proposed dispatch and control algorithm has been demonstrated by the simulation studies on a modified IEEE 39 bus system with a wind farm, a photovoltaic power station, two TCL agents and two PEV agents.

This article theoretically derives the magnetic field and vector potential produced by a steady current I flowing in an arbitrary plane loop at an arbitrary point r. Numerical examples are presented to demonstrate the behavior of the magnetic field produced by loops of various shapes such as polygons, circles, ellipses, and p-norm balls. Taking the limit as the loop shrinks to a point and the current I grows to infinity so that the magnetic dipole moment m of the loop (defined as the current I times the vector area of the loop) is kept constant, the magnetic field and vector potential are theoretically shown to converge to those of an ideal point magnetic dipole m.

The human ABCG2 multidrug transporter plays a crucial role in the absorption and excretion of xeno- and endobiotics, contributes to cancer drug resistance and the development of gout. In this work we have analyzed the effects of selected variants, residing in a structurally unresolved cytoplasmic region (a.a. 354-367) of ABCG2, on the function and trafficking of this protein. A cluster of four lysines (K357-360) and the phosphorylation of a threonine (T362) residue in this region have been previously suggested to significantly affect the cellular fate of ABCG2. Here we report that the naturally occurring K360del variant in human cells increased ABCG2 plasma membrane expression and accelerated cellular trafficking. The variable alanine replacements of the neighboring lysines had no significant effect on transport function, and the apical localization of ABCG2 in polarized cells has not been altered by any of these mutations. Moreover, in contrast to previous reports, we found that the phosphorylation incompetent T362A, or the phosphorylation mimicking T362E variants in this loop, had no measurable effects on the function or expression of ABCG2. Molecular dynamics simulations indicated an increased mobility of the mutant variants with no major effects on the core structure of the protein. These results may help to decipher the potential role of this unstructured region within this transporter.

Loop detectors are probably the widest-used technology for traffic state estimation. Previous research has shown that loop detector positions within the link significantly affect the estimation of the macroscopic fundamental diagram (MFD) of a given network. This paper examines the biases produced by the positioning of loop detectors on the MFD, using both analytical and simulation methods, as well as empirical data from UTD-19. We confirm earlier results that a uniform distribution of loop detector positions reduces the bias. For non-uniform distribution, we found that: (i) the subsets of the MFD by the loop detector position help estimate whether the loop detector MFD will have a bias; (ii) if the detectors in the network are positioned more downstream with a larger variation, the loop detector MFD is more likely to have a discrepancy in position subsets of the MFD; (iii) a lower ratio of link length to green signal time elevates the MFD bias as well. This research opens the possibility for the bias of MFD induced by the loop detector data to be corrected by only using itself.

ASEAN SME has a role as the regional socioeconomic stabilizer. This particular role is inseparable from endogenous multi-sector collaboration. Although, Indonesian SMEs were struggled in adopting Industry 4.0 correspond to digital infrastructure and digital literacy problems. This study evaluates Indonesian SME collaboration dynamics with government and technology startup (TS). The integration of agent-based model and causal loop simulation were employed to assess the TS collaboration impact on SME Industry 4.0 adoption and SME competition with larger competitors. The simulation results imply the SME collaboration with TS can lead to early adoption of Industry 4.0 which balances the business competition environment. The model also shows rising the government aid exponentially can help the SME to late adoption of Industry 4.0 which unable to sustain the SME in business competition. Thus, the developed integrative simulation model is a state-action planning model with each state result bounded to the previous state result that determined by initial input parameters. Conclusively, the model can be used as a resiliency planner for SME Industry 4.0 adoption.

We continue our recent endeavor in which a time-dependent black hole solution of a one-loop quantum-corrected Einstein-scalar system was obtained and its near-horizon behavior was analyzed. The energy analysis led to a trans-Planckian scaling behavior near the event horizon. In the present work the analysis is extended to a rotating black hole solution of an Einstein-Maxwell-scalar system with a Higgs potential. Although the analysis becomes much more complex compared to that of the previous, we observe the same basic features, including the quantum-gravitational trans-Planckian energy near the horizon.

Existing methods for detecting magnetic leakage signals from damaged wire ropes require axial saturation magnetisation, and the accuracy of the detection equipment depends on the saturation degree of magnetisation. Moreover, the expected magnetisation effect is usually difficult to achieve owing to the special characteristics of the rope structure, diameter, and operating environment of the wire rope. Consequently, in addition to other issues, the detection accuracy and versatility of the equipment are low. In this study, a method based on spatial multidimensional orthogonal array loop magnetisation for detecting mine wire rope defects is proposed. Firstly, a new sensor excitation structure model is developed. Then a method of radiant magnetic flux of permanent magnet array is analysed, and the influence law of the number of permanent radiant magnetic blocks on the magnetisation effect is studied. In addition, a method of wire rope detection based on the principle of clustering is investigated, according to which the influence law of the shape, structure, and size of the polyurethane device on the effect of magnetisation is discussed. Finally, through laboratory experiments, the test model and proposed method are verified. The results show that the magnetisation effect is better and more cost-effective when the number of permanent magnet radiation magnetic block is n=8, and the proposed detection method can effectively distinguish damaged wire rope joints. Furthermore, the proposed equipment achieved signal-to-noise ratio of the signals, improving the reliability of damage detection.

In this paper we introduce the Umbrella function and its recurrence relations. Also we provide the integral representation for the this newly defined function.

The classical Lotka-Volterra predator-prey model is globally stable and uniformly persistent. However, in real-life biosystems extinction of species due to stochastic effects is possible. In this paper, we consider the classical Lotka-Volterra predator-prey model under stochastic perturbations. For this model, using an analytical technique based on the direct Lyapunov method and a development of the ideas of R.Z. Khasminskii, we find the precise sufficient conditions for the stochastic extinction of one and both species and the precise necessary conditions for the stochastic system persistence. The stochastic extinction occurs via a process known as the stabilization by noise of the Khasminskii type, and, in order to establish the sufficient conditions for extinction, we found the conditions for the stabilization. The analytical results are illustrated by numerical simulations. {\bf Keywords:} stochastic perturbations, white noise, Ito's stochastic differential equation, the Lyapunov functions method, stability in probability, stabilization by noise, stochastic extinction, persistence.

Wearable and mobile technology has advanced in leaps and bounds in the last decade with technological advances creating a role from enhancing healthy living to monitoring and treating disease. However, the discussion about the ethical use of such commercial technology in the community, especially in minors, is lacking behind. In this paper, we first summarize the major ethical concerns that arise from the usage of commercially available wearable technology in children, with a focus on smart watches, highlighting issues around the consent process, mitigation of risk and potential confidentiality and privacy issues, as well as the potential for therapeutic misconceptions when used without medical advice. Then through a relevant thought experiment we move on to outline some further ethical concerns that are connected to the use of wearables by minors, to wit the issue of informed consent in the case of minors, forcing them to live in the spotlight, and compromising their right to an open future. We conclude with the view that mitigating potential pitfalls and enhancing the benefits of wearable technology especially for minors requires brave and comprehensive moral debates.

Recently, several research groups have reported on anomalous enhancement of the self-field critical currents, Ic(sf,T), at low temperatures in superconductor/Dirac-cone material/superconductor (S/DCM/S) junctions. Some papers attributed the enhancement to the low-energy Andreev bound states arising from winding of the electronic wave function around DCM. In this paper, Ic(sf,T) in S/DCM/S junctions have been analyzed by two approaches: modified Ambegaokar-Baratoff and ballistic Titov-Beenakker models. It is shown that the ballistic model is an inadequate tool to analyze experimental data from S/DCM/S junctions. The primary mechanism for limiting superconducting current in S/DCM/S junctions is different from the conventional view that the latter is the maximum value within the order parameter phase variation. Thus, there is a need to develop a new model for self-field critical currents in S/DCM/S systems.

This paper presents a methodology for determining the sensitivity of the main air flow directions in ventilation subnetworks to changes of aerodynamic resistance and of air density in mine workings. Formulae for determination of the sensitivity of the main subnetwork air flows by establishing the degree of dependency of the air volume stream in a given working on the variations in resistance or air density of other workings of the network have been developed. They have been implemented in the VentGraph mine ventilation network simulator. This software, widely used in Polish collieries provides an extended possibility to predict the process of ventilation, air distribution and, in the case of underground fire, also the spread of combustion gasses. The new method facilitates assessment by mine ventilation services of the stability of ventilation systems in exploitation areas and determine of the sensitivity of the main subnetwork air flow directions to changes of aerodynamic resistance and air density. Recently in some Polish collieries new longwalls are developed in seams located deeper then the bottom of the intake shaft. Such solution is called “exploitation below the level of access” or “sublevel”. The new approach may be applied to such developments to assess the potential of changes of direction and air flow rates. In addition, interpretation of the developed sensitivity indicator is presented. While analyzing air distributions for sublevel exploitation, application of current numerical models for calculations of the distribution results in tangible benefits, such as the evaluation of the safety or risk levels for such exploitation. Application of the VentGraph computer program, and particularly the module POŻAR (fire) with the newly developed options, enables an additional approach to the sensitivity indicator in evaluating air flow safety levels for the risks present during exploitation below the level of the intake shaft. The analyses performed and examples presented enabled useful conclusions in mining practice to be drawn.

The skyrocketing growth in the number of Internet of Things (IoT) devices will certainly pose a huge traffic demand for fifth-generation (5G) wireless networks and beyond. In-band full-duplex (IBFD), which is theoretically expected to double the spectral efficiency of a half-duplex (HD) wireless channel and to connect more devices, has been considered as a promising technology to accelerate the development of IoT. To exploit the full potential of IBFD, the key challenge is how to handle network interference (including self-interference, co-channel interference and multiuser interference) more effectively. In this paper, we propose a simple yet efficient user grouping method, where a base station (BS) serves strong downlink users and weak uplink users and vice versa in different frequency bands, mitigating severe network interference. We aim to maximize a minimum rate among all users subject to bandwidth and power constraints, which is formulated as a highly nonconvex optimization problem. By leveraging inner approximation framework, we develop a very efficient iterative algorithm to solve this problem, which guarantees at least a local optimal solution. Numerical results are provided to show not only the benefit of using full-duplex raido at BS, but also the advantage of the proposed user grouping method.

Biosensors and wearable sensor systems with transmitting capabilities are currently developed and used for the monitoring of health data, exercise activities, and other performance data. Unlike conventional approaches, these devices enable convenient, continuous, and unobtrusive monitoring of a user’s behavioral signals in real time. Examples include signals relative to hand an finger movement/pressure control reflected by individual grip force data. As will be shown here, these directly translate into task, skill and hand-specific (dominant versus non-dominant hand) grip force profiles for different measurement loci in the fingers and palm of the hand. On the basis of thousands of sensor data from multiple sensor locations, individual grip force profiles of an task expert, a trained user and a highly proficient user (expert) performing an image-guided and robot-assisted precision task with the dominant or the non-dominant hand are analyzed in several steps following Tukey’s “detective work” approach. Correlation analyses (Person’s Product Moment) reveal skill-specific differences in individual grip force profiles across multiple sources of variation, functionally mapped to the somatosensory brain networks which ensure grip force control and its evolution with control expertise. Implications for the real-time monitoring of individual grip force profiles and their evolution with training in complex task-user systems are brought forward.

Two pre-pulses focused at different positions and at different time moments were used to enhance THz emission generated by the main pulse. The emission of THz radiation from air breakdown regions of focused ultrashort fs-laser pulses (800 nm/35 fs) at shockwave front prepared by pre-pulses was investigated, and a 3D spatio-temporal control was established for the most intense emission. The laser pulse-induced air breakdown forms a ~120 micrometers-long focal volume and generates a shockwave that delivers denser air into the focal region of the main pulse for enhanced generation of THz radiation at 0.1-2.5 THz spectral window. The intensity of pre- and main-pulses was at the tunneling ionisation intensities (1-3)x10¹⁶ W/cm² and corresponded to sub-critical (transparent) plasma in air. Polarisation analysis revealed that the orientation of the air density gradients generated by pre-pulses and their time-space placement defined the ellipticity of the generated THz electrical field. The rotational electric current is the origin of THz radiation. The current is created by non-parallel gradients of electron density and temperature. Scaling dependencies of THz emission control are established.

Kim-Kim ([9]) studied some properties of the degenerate gamma and degenerate Laplace transformation and obtained their properties. In this paper, we define modified degenerate gamma and modified degenerate Laplace Transformation and investigate some properties and formulas related to them.

A concise proof of the Riemann Hypothesis is presented by clarifying the Hadamard product expansion over the zeta zeros, demonstrating that the Riemann Hypothesis is true.

In nowadays conditions, insurance provides the opportunity for market system of economic management to work in any state. To provide economic security of the person it is needed to create a mechanism of protection against internal and external threats in modern Russia. That’s why the role of citizens insurance policy is increasing as the most effective risk management institute and achieving safety of health and private property of citizens. The goal of this research is to study Russian citizens’ attitudes towards insurance policy and investment using the conception of personal economic security. The preparatory study stage was focused on theoretical understanding of economic security problems taking insurance field as an example. Empirical research consisted of four stages. There were 1793 people taking part in this research. Results of this study can be proposed in the program of improving the functioning of the insurance market in the Russian Federation in The framework of the strategy of development of the insurance market - 2020. The obtained results can be used in Politics and Economics in the development of a set of measures related to lawmaking, control of financial institutions, promotion of financial literacy of the population, preparation of courses for universities and trainings for participants of the insurance market. The typologies of policyholders which were given can be the basis to create insurance programs for the citizens.

Human Activity Recognition (HAR) technology enables continuous behavior monitoring, particularly valuable in healthcare. This study investigates the viability of using an ear-worn motion sensor for classifying daily activities, including lying, sitting/standing, walking, ascending stairs, descending stairs, and running. Fifty healthy participants (between 20 and 47 years old) engaged in these activities while under monitoring. Various machine learning algorithms, ranging from interpretable shallow models to state-of-the-art deep learning approaches designed for HAR, were employed for classification. Results demonstrate the ear sensor's efficacy, with deep learning models achieving 98% accuracy rate of classification. The obtained classification models are agnostic regarding which ear the sensor is worn and robust against moderate variations in sensor orientation (e.g., due to differences in auricle anatomy), meaning no initial calibration of the sensor orientation is required. The study underscores the ear's efficacy as a suitable site for monitoring human daily activity and suggests its potential for combining HAR with in-ear vital signs monitoring. This approach offers a practical method for comprehensive health monitoring by integrating sensors in a single anatomical location. This integration facilitates individualized health assessments, with potential applications in tele-monitoring, personalized health insights, and optimizing athletic training regimes.

Cervical cancer is a significant global health concern, with human papillomavirus (HPV) infection being a crucial risk factor. Photodynamic therapy (PDT) is an attractive, minimally invasive treatment for HPV-related cervical lesions, which uses photosensitizers and light to selectively de-stroy abnormal cells. We aim to provide an overview of the various sorts of dyes that are utilized in PDT for decreasing the incidence and mortality of cervical cancer. Besides, the article discusses ongoing clinical trials for PDT in low-grade squamous intraepithelial neoplasia (LSIL) and high-grade squamous intraepithelial lesions (HSIL), as well as preclinical approaches for PDT in cervical cancer using various dyes. Moreover, it highlights potential dyes for PDT, examine them in in-silico condition, their pros and cons and also the solutions for enhancing their anticancer com-patibility. We also display that PDT is a promising therapeutic strategy for the diagnosis and treatment of HPV-associated cervical lesions. Moreover, it shows that using different classes of dyes improves the anticancer effects of PDT. Finally, among all dyes which are used in PDT, Fullerene demonstrated high tendency to over expressed receptors in cervical cancer cells and seems to be a proper candidate for be used in PDT more than before, but further research is necessary to assess its long-term efficacy and safety.

Phenotype variation is produced through a complex of interactions between genotype and environment. Phenotype, genotype, and environment are addresses the relationship between architecture and identity. The term genotype biology and phenotype have been adopted into architecture in the late twentieth century. Genotypes are abstract relational models that govern the arrangement of space, and the principle of organizing space and phenotypes is the real realization of genotypes in the physical environment. The genotype is a reflection that is not only about the spatial organization but also the nature of social and cultural patterns. Then this study purpose to an understanding of the connectedness variant phenotype from a genotype and environment. The repetition pattern being stable structure in variation phenotype uses as a database to finding an identity in architecture. The method used in this research was Levi Strauss's structuralism and multi-layer of a biological system. This research samples traditional Malay houses in West Borneo, Indonesia. These houses have a unique site and existing environment. The houses can be found mainly along the river. The results found from the phenotype, genotype, and environment have value and meaning as a traditional Malay house rule in West Borneo which was always handed down from generation to generation.

Paving blocks are concrete pieces placed in exposed places to the weather, which are sub-jected to loads and wear. Hence, quality control in the manufacture of paving blocks is es-sential to guarantee the properties and durability of the product in construction projects. In Ecuador, the requirements are described in the Ecuadorian technical standard "NTE INEN 3040", and tensile splitting strength is a fundamental requirement to guarantee product quality. It is analyzed using quality control measurements such as dimensions, the weight of the fresh paving block in the vibro-compacted process, and the percentage of water absorption in order to know how the variables influence and manage to predict the tensile splitting strength to avoid product non-conformity in advance, having a timely and better control of the manufacturing process. The data was obtained from a company that can produce 30 000 units per day of rectangular paving blocks with 6 cm thickness. Mul-tivariate models such as multiple linear regression, regression trees, random forests and neural networks are performed to predict the tensile splitting strength variable through two groups of predictors; the first group is the thickness mm, width mm, length mm, mass of fresh paving block g and percentage of water absorption %. The second group of pre-dictor variables is the density of the fresh paving block kg/m3 and the percentage of water absorption %. It is concluded that the multiple linear regression method performs better in predicting the first group of predictor variables with a mean square error (MSE) of 0.110086, followed by the neural network without hidden layers resulting in an MSE of 0.112198. The best method for the second set of predictors was the neural network with-out hidden layers with a mean square error ( MSE ) of 0.112402, closely followed by the multiple linear regression model with an MSE of 0.115044.

In this paper, the author utilizes Saddle Theorem and variational methods to deduce existence of at least six stationary solutions for reaction-diffusion Gilpin-Ayala competition model (RDGACM). To obtain the global stabilization of the positive stationary solution of the RDGACM, the author designs a suitable impulsive event triggered mechanism (IETM) to derive the global exponential stability of the the positive stationary solution. It is worth mentioning that the new mechanism can exclude Zeno behavior and effectively reduce the cost of impulse control through event triggering mechanism. Besides, compared with existing literature, the restrictions on the parameters of the RDGACM are relaxed so that the methods used in existing literature can not be applied to the relaxed case of this paper, and so the author makes comprehensive use of Saddle Theorem, orthogonal decomposition of Sobolev space $H_0^1(\Omega)$ and variational methods to overcome the mathematical difficulty. Numerical examples show the effectiveness of the methods proposed in this paper.

In the present paper, we efficiently solve the two-body problem for extreme cases such as those with high eccentricities. The use of numerical methods, with the usual variables, cannot maintain the perihelion passage accurately. In previous articles, we have verified that this problem is treated more adequately through temporal reparametrizations related to the mean anomaly through the partition function. The biparametric family of anomalies, with an appropriate partition function, allows a systematic study of these transformations. In the present work, we consider the elliptical orbit as a meridian section of the ellipsoid of revolution, and the partition function depends on two variables raised to specific parameters. One of the variables is the mean radius of the ellipsoid at the secondary, and the other is the distance to the primary. One parameter regulates the concentration of points in the apoapsis region, and the other produces a symmetrical displacement between the polar and equatorial regions. The three most used geodesy latitude variables are also studied, resulting in one not belonging to the biparametric family. However, it is in the one introduced now, which implies an extension of the biparametric method. The results obtained by the method presented here now allow a causal interpretation of the operation of numerous reparametrizations used in the study of orbital motion.

WBAN is a blessing to mankind because it can monitor people's health and activities regardless of place or time. It brings feasibility in patients’ treatment. The main problems with WBAN, however, are related to the security and privacy of health data. To prevent data misuse, health information should be safeguarded. On the other hand, the medical professional needs to receive the patient's health information promptly. As security of health data impact human life greatly so secure an efficient method is required. Efficient cryptographic technique for data protection of wireless body area network is proposed. This research aims to provide data protection in WBAN to increase data security and efficient transmission. The suggested approach offers effective security with quick key generation, quick encryption, and secure data transmission across the network. The proposed methodology is considered to be secure and will consume less time. The proposed method further uses a less complex encryption algorithm. The less complex the approach is the higher performance it will provide in wireless network. The proposed methodology will prevent many attacks, which makes the proposed approach highly suitable for wireless body area network’s security.

The divination function of China's Yijing has led to its circulation for thousands of years. In our exploration of Yijing's characteristics using big data, we have discovered variations in results between the coin toss method and the ancient yarrow-stalk method of divination, known as "the number for the great expansion method of divination(大衍之数)". The yarrow-stalk method serves as the fundamental method of divination in Yijing and continues to hold significance in studying the essential characteristics of Yijing. Despite the complexity of yarrow calculations, advancements in computer technology and big data have simplified its application. By employing the yarrow-stalk method, we simulated changes in the 64 hexagrams, calculated probabilities and proportions of hexagram alterations, and derived fundamental characteristics and patterns of hexagrams. Additionally, we constructed the spatial representation of lines and hexagrams. Through a binary system rearrangement, we created a 64x64 matrix illustrating hexagram transformations. Subsequently, we generated 100 million random hexagrams and analyzed line and hexagram changes accordingly. Our findings indicate the following:(1) Big data analysis reveals evident asymmetry in the hexagrams obtained through the yarrow-stalk method, with a triangular fractal characteristic forming the background.(2) Each of the 64 hexagrams exhibits a distinct probability distribution when transforming into other hexagrams, which can be categorized into five types.(3)The occurrence probabilities of Laoyang, Laoyin, Shaoyang, and Shaoyin are 18.61%, 6.387%, 31.38%, and 43.62% respectively. The probabilities of Yin and Yang occurrences are nearly equal, each close to 50%. However, the probability of Laoyang is approximately three times higher than that of Laoyin.(4) Visualized and analyzed the characteristics of hexagram changes greater than 100000 times using 3D statistical maps and Sankey diagram.These results demonstrate that the yarrow-stalk method effectively unveils the characteristics and underlying patterns of the 64 hexagrams. This study provides a novel approach for scientifically exploring the internal laws governing the 64 hexagrams in Yijing.

Introduction: Some of the practices in medicine are carried out of habit without proven benefits. This is the case of premature babies from 30 to 34 weeks of gestation who are always given parenteral fluids, even though this practice has been associated with an increase incidence of infection. At the end of 2017, we started a protocol of rationalization in the use of parenteral fluid. To administer nutrition/fluids, we used oral fluids by suction if this was possible or otherwise by oral/nasogastric tube at volumes of 70-80 mL/Kg/day divided every 3 hours, with 5 mL increments every 12-24 hours until 200 mL/K/day was achieved, always using breast milk when possible. Material and methods: The present study sought to compare results before and after this new policy. For this work, we review all premature babies between 30-34 weeks of gestation in two time periods, the first from 01/01/2010 to 12/31/2017 and the second from 01/01/2018 to 08/15/2022. The number of cases with and without parenteral fluids (PF), the incidence of infection, the weight at admission and discharge, and the change in the weight Z score between birth and discharge were compared. Both the anthropometric and outcome variables were compared using the different statistical methods according to each variable. Results: were found 920 cases with the described characteristics. The groups before and after the intervention did not show significant differences in their general demographic characteristics. We observed a decrease use of PF in the second period, from 425 cases (82.0%) before to 297 (26.2%) after implementation, p <0.0001 and fewer days of use (4.1 days/average before vs 1.3 after, p <0.0001) of PF. The weight at discharge and the change in weight Z-score were the same in both groups. Infections went from nine cases before to two cases after but it was not statistically significant. There were no complications due to less use of PF. Discussion: This study showed that the use of PF is not associated with significant changes in outcomes of interest, which reinforces that its use does not generate any benefit for the patient. Larger number of cases is required to detect differences in low incidence events such as infections.

Arabic was the language of philosophy, logic, Islamic sciences and rhetorical linguistic sciences. It was used in the writing of all sciences generally and became the language of world culture. Although the other languages of the Islamic world had a little share, but all peoples of Islamic countries; Arabs and non-Arabs, Muslims and non-Muslims attributed to that movement appreciated. Hence, Arab sciences flourished in their bright ages. Arabic language was a cultural container of the ancient Greek and Latin intellectual heritage. As the ancient Greek and Latin sciences and literatures were translated into Arabic in the bright ages of Islam. Arab language was a strong bond for them, as a common human heritage for the centuries to save it from being lost, as Muslims used it to develop their sciences and arts, as Muslims in the East used the Western sciences and literatures in the modern age, because they are not Eastern or Western, but the common efforts of all humanity. Arabic language opened for the dictionaries ​​and other tongues of cross-fertilization, civil friction and simulation. Arabic had become the language of sciences: mathematics, astronomy, engineering, logic, philosophy, mysticism, agriculture, industry and economics by the continuous efforts of scientists in their scientific research, invention, experimentation, knowledge collection and classification in various fields, where orientalists recognized the Arab leadership. That scientific and literary civilization moved to Europe through Italy, Andalusia, Crusades and the Ottoman Caliphate. Europeans learned Arabic language, literature and sciences in the centers of Toledo, Fez and cities of Maghreb.

Advances in technology have introduced remarkable capabilities, particularly in the realm of gathering and accessing vast amounts of data, which has led to the emergence of the "Big Data" era, presenting exciting opportunities to harness the wealth of the generated information. Traffic management centers comprise a stakeholder that can exploit such data towards improving road network operation. This research, explores the utilization of real traffic data, collected by distinct sources on an interurban motorway: static location based aggregate traffic data and probe vehicle data. The first is collected by traffic detectors, while the second involves patrol vehicles’ GNSS data. The traffic quantity analysed is vehicle speed, while specific emphasis has been given on the ap-plication of heatmaps to represent daily traffic patterns and the utilization of k-means clustering. The performed analysis demonstrates the importance of considering spatiotemporal variables as a unified entity when analysing speed in transportation networks. The limitations of using patrol vehicles as estimators of ambient speed, especially in low and heavy traffic conditions, are deline-ated, while the dual purpose of data gathered from these vehicles towards enhancing driving performance and enabling detector maintenance is emphasized. Valuable traffic insights are offered through comprehensive spatiotemporal speed behavior analysis and data combination. The inte-gration of these techniques enhances decision-making for a streamlined and secure transportation system

Ranging from traditional food packaging, clothing, and furniture to the current small and large electronic devices and automobiles, plastics serve to fulfill diverse demands in our daily lives. However, the global plastic waste generation is dramatically escalating, currently standing at approximately 150 million metric tonnes annually. While some of regenerated plastics recycled by mechanical methods can be used as their parent plastics, cost and energy savings are limited by multiple preliminary processes such as plastic sorting, shredding, washing, and drying. Moreover, the continuous mechanical recycling process degrades the physical properties of the materials. In this context, chemical recycling is emerging as a promising alternative method due to its high efficiency, simple preliminary steps, reducing reliance on fossil resources, and conversion of plastic waste into value-added chemicals. This review provides a state-of-the-art overview of contemporary chemical recycling of polymeric materials via i) depolymerization: “polymers to small valuable molecules” and ii) closed-loop cycles: “polymers to monomers, and/or to polymers”, by encompassing both traditional/advanced depolymerization chemistries and the remaining challenges. These recycling approaches are contextualized within the present industrial technologies, key design principles, and specific recycling case studies related to distinct polymeric materials.

Equines play an important role throughout the world, whether for work, culture, or leisure, providing an ever-growing significant contribution on the economy. The increase in importation and movement of horses, both nationally and internationally, has inevitably allowed for the global equine industry to grow. Subsequently however, the potential for transmission of fatal equine bacterial diseases has also escalated, and devasting outbreaks continue to occur. To prevent such events, disease surveillance and diagnosis must be heightened throughout the industry. Current common, or "gold-standard" techniques, have shown to be inadequate at times, thus requiring newer technology to impede outbreaks. Loop-mediated isothermal amplification (LAMP) has proven to be a reliable, rapid, and accessible tool in both diagnostics and surveillance. This review will discuss equine bacterial diseases of biosecurity relevance and their current diagnostic approaches, as well as their respective LAMP assay developments. Additionally, we will provide insight regarding newer technology and advancements associated with this technique, and their potential use for the outlined diseases.

Diabetes mellitus leads to cardiovascular complications including impaired cardiac β-adrenoceptor (β-AR) function. Sodium-glucose cotransporter-2 (SGLT2) inhibitors, such as empagliflozin (EMPA) improve outcomes in heart failure patients and animal models thereof. Therefore, we have investigated the effects of EMPA on in vivo cardiac function (pressure-volume loop analysis) and β-AR-mediated contractile responses (papillary strips) in streptozotocin (STZ; 40 mg/kg, i.p.)-induced diabes in male Sprague Dawley rats (control, EMPA-treated control, diabetic, EMPA-treated diabetic) in a design reflecting late-onset treatment. 13-16 weeks after STZ injection treatment with a low dose of EMPA (10 mg/kg/day, daily oral gavage) or vehicle was administered for another 8 weeks. EMPA did not change cardiac function in control rats. Diabetic rats had a reduced heart rate, cardiac output, stroke work, rate of contration and rate of relaxation and increased isovolumic relaxation, whereas in vitro responses were not markedly attenuated. Treatment with EMPA showed a trend for improvement of some but not all parameters. Our results indicate that low dose EMPA treatment had limited effects on cardiac impairment despite reducing blood glucose when initiated after diabetes is manifest. Future studies with a higher dose and greater sample sizes could help to clarify the possible benefits of EMPA on the diabetic heart.

This paper reports the design, development, and testing of a novel, yet simple and low-cost portable device for the rapid detection of SARS-CoV-2. The device performs loop mediated isothermal amplification (LAMP) and provides visually distinguishable images of the fluorescence emitted from the samples. The device utilises an aluminium block embedded with a cartridge heater for isothermal heating of the sample and a single-board computer and camera for fluorescence detection. The device demonstrates promising results within 20 minutes using clinically relevant starting concentrations of the synthetic template. Time-to-signal data for this device are considerably lower compared to standard qPCR machine (~10-20 minutes vs &gt;38 minutes) for 1×105 starting template copy number. The device in its fully optimized and characterized state can potentially be used as simple to operate, rapid, sensitive, and inexpensive platform for population screening as well as point-of-need SARS-CoV-2 detection and patient management.

The PI3K/mTOR signalling pathway plays a central role in the governing of cell growth, survival and metabolism. As such, it must integrate and decode information from both external and internal sources to guide efficient decision-making by the cell. To facilitate this, the pathway have evolved an intricate web of complex regulatory mechanisms and elaborate crosstalk with neighbouring signalling pathways, making it a highly non-linear system. Here, we describe the mechanistic biological details that underpin these regulatory mechanisms, covering a multitude of negative and positive feedback loops, feed-forward loops, competing protein interactions, and crosstalk with major signalling pathways. Further, we highlight the non-linear and dynamic network behaviours that arise from these regulations, uncovered through both computational and experimental studies. Given the pivotal role of the PI3K/mTOR network in cellular homeostasis and its frequent dysregulation in pathologies including cancer and diabetes, a coherent and systems-level understanding of the complex regulation and consequential dynamic signalling behaviours within this network is imperative for advancing biology and development of new therapeutic approaches.

The conformational state of the activation loop (A-loop) is pivotal for the activation of most protein kinases. Hence, the characterization of the conformational dynamics of the A-loop is important to increase our understanding of the molecular processes related to diseases and to support the discovery of small molecule kinase inhibitors. Here, we carry out a combination of Molecular Dynamics (MD) and Essential Dynamics (ED) analyses to fully map the effects of phosphorylation, ADP, and conformation disrupting (CD) inhibitors (i.e., CD532 and MLN8054) on the dynamics of the A-loop of Aurora-A. MD revealed that the stability of the A-loop in an open conformation is enhanced by single phospho-Thr-288, while paradoxically, the presence of second phosphorylation at Thr-287 decreases such stability and renders the A-loop more fluctuant in time and space. Moreover, we found that such post-translational modification has a significant effect on the direction of A-loop motions. ED analysis suggests that the presence of the phosphate moiety induces the dynamics of Aurora-A to sample two distinct energy minima, instead of a single large minimum, as in unphosphorylated Aurora-A states. This suggests that the conformational distributions of Aurora-A with both single and double phospho-threonine modifications are remarkably different from the unphosphorylated state. In the closed states, binding of CD532 and MLN8054 inhibitors has the effect of increasing the distance of the N- and C-lobes of the kinase domain of Aurora-A, and the angle analysis between those two lobes during MD simulations showed that the N- and C-lobes are kept more open in presence of CD532, compared to MLN8054. As the A-loop is a common feature of Aurora protein kinases, our studies provide a general description of the conformational dynamics of this structure upon phosphorylation and different ligands binding.

Sensor fusion technology is one of extensive used methods in the field of robot, aerospace and target tracking control. In this paper, the generalized sensor fusion framework, named the closed-loop fusion (CLF) is analyzed and the optimal design principle of filter is proposed in detail. Fusion error optimization problem, which is the core issue of fusion design, is also solved better through the feedback compensation law of CLF framework. Differently from conventional methods, the fusion filter of CLF can be optimally designed and the determination of superposition of fusion information is avoided. To show the validity, simulation and experimental results are to be submitted.

Background: Dendrobium officinale is not only an ornamental plant, but also a valuable medicinal herb that is both effective and widely used in traditional Chinese medicine. However, distinguishing D. officinale from other Dendrobium species is usually a difficult task that need much time and complex technologies due to their very similar external morphologies. The aim of this study is to develop a fast, even on-spot approach to identify D. officinale. Methods: We used DNA barcode-based loop-mediated isothermal amplification (LAMP) method with species-specific LAMP primers targeting the internal transcribed spacer (ITS) region of the rDNA of D. officinale. LAMP reaction time and temperature were optimized and the specificity and sensitivity of LAMP species-specific primers were assessed. Results: This technique showed a high specificity and sensitivity to amplify the genomic DNA of D. officinale and allowed for rapid amplification (within 40 min) of the ITS region under a constant and mild temperature range of 65 °C without using thermocyclers. Besides, by using SYBR® Green I dye as the color developing agent, the color change was easily observed with naked eye. Reaction mixture containing DNA of D. officinale changed from orange to green, while the other Dendrobium species and the negative control retained original orange color. The specificity of this LAMP-based method was confirmed by testing 17 samples of D. officinale and 32 adulterant samples from other Dendrobium species. Conclusions: This LAMP-based rapid identification method does not require expensive equipment or specialized techniques and can be used in field surveys for accurate and fast on site identification.

Previous studies generally reckon that the full converter-base wind power generation (FCWG) is a ’decoupled’ power source from the grid, which hardly participates in electromechanical oscillations. However, it is found recently that strong interaction could be induced which might incur severe resonance incidents in electromechanical dynamic timescale. In this paper, the participation of FCWG in electromechanical dynamics is extensively investigated, and particularly, an unusual transition of electromechanical oscillation mode (EOM) is uncovered for the first time. The detailed mathematical models of open-loop and closed-loop power systems are firstly established, and modal analysis is employed to quantify the FCWG participation in electromechanical dynamics, with two new mode identification criteria, i.e., FCWG dynamics correlation ratio (FDCR) and quasi-electromechanical loop correlation ratio (QELCR). On this basis, the impact of different wind penetration levels and controller parameter settings on the participation of FCWG is investigated. It is revealed that if an FOM has a similar oscillation frequency to the system EOMs, there is a high possibility to induce strong interactions between FCWG dynamics and system electromechanical dynamics of the external power systems. In this circumstance, an interesting phenomenon may occur that an EOM may be dominated by FCWG dynamics, and hence is transformed into a quasi-EOM, which actively involves the participation of FCWG quasi-electromechanical state variables.

In the wake of rapid advancements in artificial intelligence (AI) and sensor technologies, a new horizon of possibilities has emerged across diverse sectors. Livestock farming, a domain often sidelined in conventional AI discussions, stands at the cusp of this transformative wave. This paper delves into the profound potential of AI and sensor innovations in reshaping animal welfare in livestock farming, with a pronounced emphasis on a human-centric paradigm. Central to our discourse is the symbiotic interplay between cutting-edge technology and human expertise. While AI and sensor mechanisms offer real-time, comprehensive, and objective insights into animal welfare, it's the farmer's intrinsic knowledge of their livestock and environment that should steer these technological strides. We champion the notion of technology as an enhancer of farmers' innate capabilities, not a substitute. Our manuscript sheds light on: Objective Animal Welfare Indicators: An exhaustive exploration of health, behavioral, and physiological metrics, underscoring AI's prowess in delivering precise, timely, and objective evaluations. Farmer-Centric Approach: A focus on the pivotal role of farmers in the adept adoption and judicious utilization of AI and sensor technologies, coupled with discussions on crafting intuitive, pragmatic, and cost-effective solutions tailored to farmers' distinct needs. Ethical and Social Implications: A discerning scrutiny of the digital metamorphosis in farming, encompassing facets like animal privacy, data safeguarding, responsible AI deployment, and potential technological access disparities. Future Pathways: Advocacy for principled technology design, unambiguous responsible use guidelines, and fair technology access, all echoing the fundamental principles of human-centric computing and analytics. In essence, our paper furnishes pioneering insights at the crossroads of farming, animal welfare, technology, and ethics. It presents a rejuvenated perspective, bridging the chasm between technological advancements and their human beneficiaries, resonating seamlessly with the ethos of the Human-Centric Intelligent Systems journal. This comprehensive analysis thus marks a significant stride in the burgeoning domain of human-centric intelligent systems, especially within the digital livestock farming landscape, fostering a harmonious coexistence of technology, animals, and humans.

The most effective method of determining the coordinates of the railway track axis is mobile satellite measurements. However, there are situations when the satellite signal may be disturbed (due to field obstructions) or completely disappear (e.g. in tunnels). Then the ability to measure the value of the directional angle of a moving rail vehicle using an inertial system comes in handy. The directional angle is determined on a topographic map as the angle between the direction of the vehicle longitudinal axis (or the direction of a tangent to the track axis) and the reference direction, which is the north. The article presents a method for determining the directional angle of a railway line based on appropriate measurement data. The latter should be Cartesian coordinates of the track axis, allowing for the visualization of a given railway route and obtaining a general orientation about its course. The presented proposal for solving the problem refers to the assumptions made in the method of determining the curvature of the railway track axis using the moving chord.

Breast cancer treatment mostly revolved around radiation therapy and surgical interventions, these treatments doesn’t provide satisfactory relief to the patients and carry unmanageable side-effects. Nanomaterials show promising results in treating cancer cells and have many advantages such as high biocompatibility, bioavailability and effective therapeutic capabilities. Interestingly, fluorescent magnetic nanoparticles have been used in many biological and diagnostic applications, but there is no report of use of fluorescent magnetic submicronic polymer nanoparticles (FMSP-nanoparticles) in the treatment of human breast cancer cells. In the present study, we have tested the effect FMSP-nanoparticles on human breast cancer cells (MCF-7). We have tested different concentrations (1.25µg/1mL, 12.5µg/mL and 50µg/1mL) of FMSP-nanoparticles in MCF-7 cells and evaluated the nanoparticles response morphometrically. Our results revealed that FMSP-nanoparticles produced a concentration dependent effect on the cancer cells, dose of 1.25µg/mL produced no significant effect on the cancer cell morphology and cell death, whereas dosages of 12.5µg/mL and 50µg/mL respectively showed significant nuclear augmentation, disintegration, chromatic condensation followed by dose dependent cell death. Our results demonstrate FMSP-nanoparticles have ability to induce cell death in MCF-7 cells and may be considered as a potential anti-cancer agent for breast cancer treatments.

The subject of the research is the investigation of the behavior of railway tracks in locations with a significant change in the stiffness of the track. These locations can be designed from various structural elements and their materials, and this mainly results in a height change of the track level during its operation. These transition zones are monitored and expertly examined in order to detect undesirable deformations of the geometrical position of the track caused by the trains running. The transition zones are at the points where the fixed track transitions to the classic track bed, in our case it is their combination with bridge structures, especially at their supports. In Slovakia, under the conditions of the Railways of the Slovak Republic, the issue is topical within the framework of the modernization of trans-European railway corridors. The results of experimental measurements and their analysis will provide relevant data for subsequent research solutions for their new numerical modeling, which will ensure a smooth passage through these points of change without height fluctuations, vibrations, and shocks from the wheels of train sets.

The Church of the Company of Jesus in Quito (1605-1765) is one of the most remarkable examples of colonial religious architecture on the World Heritage List. This church has multiple constructive phases and several interventions with no clear record of the entire architectural site, including the historical mortars. A total of 14 samples of coating mortars inside the central nave were taken, with the protocols suggested by the research team and a comparative sample of the architectural group that does not have intervention. The analysis presented in this paper focuses on mineralogical characterization, semi-quantitative analysis by X-ray diffraction and scanning electron microscopy with microanalysis of the samples. The results showed the presence of volcanic aggregate lime and gypsum, used in lining mortars and joint mortars. Mineralogical and textural composition data have allowed the mortar samples to be relatively dated.

Chan and colleagues in their paper titled “Human origins in a southern African palaeo-wetland and first migrations” (https://www.nature.com/articles/s41586-019-1714-1) report 198 novel whole mitochondrial DNA (mtDNA) sequences and infer that ‘anatomically modern humans’ originated in the Makgadikgadi–Okavango palaeo-wetland of southern Africa around 200 thousand years ago. This claim relies on weakly informative data. In addition to flawed logic and questionable assumptions, the authors surprisingly disregard recent evidence and debate on human origins in Africa. As a result, the emphatic and high profile conclusions of the paper are unjustified.

The human virome is an area of increasing interest with relation to human health and disease. It has been demonstrated to alter in concert with the bacterial microbiome in early life and was also found to be different in patients with certain diseases such as inflammatory bowel disease. However, all virome analyses are hampered by a lack of annotated representative database sequences, often referred to as the ‘viral dark matter’. Here we provide the first description of the gut DNA virome in elderly individuals (>65 years old) as well as the description of novel bacteriophages not present in current reference databases. Diversity analysis comparing elderly persons from different residence locations (community living vs long term care facilities) did not reveal any difference in their virome diversity profiles despite the reported differences at the bacteriome level. An abundance of Microviridae of the subfamily Gokushovirinae were present in the faeces of elderly individuals. Several novel members of the order Caudovirales were also characterized and annotated. Assignment of host bacteria to detected viral genomes was attempted using a combination of CRISPR spacers, tRNA genes and a probabilistic approach. Further characterization of the viral dark matter is necessary for developing tools and expanding databases to study the human virome. This study focused on the virome of an aging human cohort with the goal of illuminating part of the viral dark matter.

Modeling and assessing the sustainability of machining systems has been considered to be a crucial approach to improving the environmental performance of the machining processes. As the most common machining system, the computer numerical control (CNC) milling system is a typical man-machine cooperative system where the activities of the machine tool and operator generate material and energy consumption. However, the energy consumption of the operator in the CNC milling system has often been ignored in most existing research. Therefore, existing methods fail to provide a comprehensive understanding of the sustainability of the CNC milling system. To fill this gap, an exergy loss assessment method is proposed to investigate the sustainability of the CNC milling system, where the energy consumption of the operator, the energy consumption of the machine tool, and material consumption are taken into consideration. The key performance indexes of the energy consumption of the operator, the energy consumption of the machine tool, the exergy loss, and the specific exergy loss (SEL) are analyzed and modeled. To demonstrate the feasibility of the proposed method, a case study was carried out on a three-axis machining center (XH714D), in which SEL was found to be 88.04J/mm3. The proposed method is effective to assess the sustainability of the CNC milling system, and the established exergy loss models build a good basis for exergy efficiency optimization.

We propose a spectral filter based on Plastic Optical Fiber with micro-holes as a low-cost, robust, and highly reproducible spectral filter. The spectral filter is explored for two configurations: fiber extended in a straight line, and a fiber optic loop mirror scheme configuration. The transmission traces indicate a spectral blue shift of peak transmission, at 587 nm, 567 nm, 556 nm, and 536 nm for 0, 1, 2, and 3 holes in the fiber, respectively. The filter exhibits a bandpass period of approximately 120 nm. Additionally, we conducted a comparison of the transmission with holes separated by distances of 1 cm and 500 μm. The results demonstrate that the distance between holes does not alter the spectral transmission of the filter. In the case of the fiber loop mirror configuration, we observed that the bandpass can be adjusted, suggesting the presence of multimode interference. Exploring variations in the refractive index within the holes by filling them with glucose solutions at various concentrations, we determined that the filtering band and spectral shape remains unaltered, ensuring a stable and robust operation of our spectral filter.

We develop a quantitative microscopic theory of decaying Turbulence by studying the dimensional reduction of the Navier-Stokes loop equation for the velocity circulation. We have found an infinite dimensional manifold of solutions of the Navier-Stokes loop equation\cite{M93, M23PR} for the Wilson loop in decaying Turbulence in arbitrary dimension $d >2$. This family of solutions corresponds to a fractal curve in complex space $\mathbb C^d$, described by an algebraic equation between consecutive positions plus a nonlinear periodicity condition. We derive the constrained SDE for the evolution of the fractal curve at a fixed moment of physical time as a function of an auxiliary stochastic time. We expect this stochastic process to cover our fixed manifold of the solutions of the decaying Turbulence. The energy density of the fluid decays as $\mathcal E_0/t$, where $\mathcal E_0$ is an initial dissipation rate. Presumably, we have found a new phase of extreme Turbulence yet to be observed in real or numerical experiments.

A novel scheme that can simultaneously measure the Doppler frequency shift (DFS) and angle of arrival (AOA) of microwave signals is proposed. At the signal receiving unit (SRU), two echo signals and the reference signal are modulated by a Sagnac loop structure and sent to the central station (CS) for processing. At the CS, two low-frequency electrical signals are generated after polarization control and photoelectric conversion. The DFS without direction ambiguity and wide AOA measurement can be real-time acquired by monitoring the frequency and power of the two low-frequency electrical signals. In the simulation, an unambiguous DFS measurement with errors of ±3×10-3 Hz and a -90° to 90° AOA measurement range with errors of less than ±0.5° are realized. The safety and robustness of the system to environmental disturbance are improved, and it is more suitable for the modern electronic warfare system.

To overcome the two-phase flow instability of traditional boiling heat dissipation technologies, a porous wick was used for liquid-vapor isolation, thus realizing efficient and stable boiling heat dissipation. A pump-assisted capillary phase-change loop with methanol as working medium was established to study the effect of liquid-vapor pressure difference and heating power on its start-up and steady-state characteristics. The results indicated that the evaporator undergoes four heat transfer modes including flooded, partial flooded, thin film evaporation and overheating. The thin film evaporation mode was the most efficient one with the shortest start-up period. Besides, the heat transfer modes were determined by liquid-vapor pressure difference and power. The heat transfer coefficient could be significantly improved and the thermal resistance could be reduced by increasing liquid-vapor pressure difference as long as it did not exceed 8 kPa. However, when the liquid-vapor pressure difference exceeded 8kPa, its influence on the heat transfer coefficient weakened. In addition, a two-dimensional heat transfer mode distribution diagram considering both liquid-vapor pressure difference and power was drawn through a great number of experiments. During engineering application, the liquid-vapor pressure difference can be controlled to maintain efficient thin film evaporation in order to achieve the optimum heat dissipation effect.

Quorum sensing (QS) describes a process by which bacteria can sense the local cell density of their own species, thus enabling them to coordinate gene expression and physiological processes on a community-wide scale. Small molecules called autoinducers or QS signals, which act as intraspecies signals, mediate quorum sensing. As our knowledge of QS has progressed, so too has our understanding of the structural diversity of QS signals, along with the diversity of bacteria conducting QS and the range of ecosystems in which QS takes place. It is now also clear that QS signals are more than just intraspecies signals. QS signals mediate interactions between species of prokaryotes, and between prokaryotes and eukaryotes. In recent years, our understanding of QS signals as mediators of algae–bacteria interactions has advanced such that we are beginning to develop a mechanistic understanding of their effects. This review will summarize the recent efforts to understand how different classes of QS signals contribute to the interactions between planktonic microalgae and bacteria in our oceans, primarily N-acyl-homoserine lactones, their degradation products tetramic acids, and 2-alkyl-4-quinolones. In particular, this review will discuss the ways in which QS signals alter microalgae growth and metabolism, namely as direct effectors of photosynthesis, regulators of the cell cycle, and as modulators of other algicidal mechanisms. Furthermore, the contribution of QS signals to nutrient acquisition is discussed, and finally how microalgae can modulate these small molecules to dampen their effects.

This paper presents a 612–1152 MHz Injection Locked Frequency Multiplier (ILFM). The proposed ILFM is only used for sending an input signal to the receiver in the I/Q mismatch calibration mode. Using the Phase-Locked Loop (PLL) to calibrate the receiver places a burden on this system due to the extra area required and power consumption. Instead of the PLL, to satisfy high frequency, low jitter, and low area, a Ring Oscillator is proposed. The free-running frequency of the ILFM is automatically digitally calibrated to reflect the frequency of the injected signal from the harmonics of the reference clock. To control the frequency of the ILFM, the load current is digitally tuned with 6-bit digital control signal. The proposed ILFM locks to the target frequency using a digitally controlled Frequency Locked Loop (FLL). This chip is fabricated using 1-poly 6-metal 0.18 µm CMOS and achieve the wide tuning range of 612–1152 MHz. The power consumption is 0.95 mW from a supply voltage of 1.8 V. The measured phase noise of the ILFM is −108 dBc/Hz at a 1 MHz offset.

In this work, we present some results related with the issue of the Loop Quantum Black Holes (LQBH) thermodynamics by the use of the tunneling radiation formalism. The information loss paradox is also discussed in this context, where we have considered the influence of back reaction effects.

Porous coatings on prosthetic implants encourage implant fixation. Enhanced fixation may be achieved using a magneto-active porous coating that can deform elastically in vivo on application of an external magnetic field, straining in-growing bone. Such coating, made of 444 ferritic stainless steel fibres, was previously characterised in terms of its mechanical and cellular responses. In this work, co-cultures of human osteoblasts and endothelial cells were seeded into a novel fibrin-based hydrogel embedded in a 444 ferritic stainless steel fibre network. Albumin was successfully incorporated into fibrin hydrogels improving the specific permeability and the diffusion of fluorescently-tagged dextrans without affecting their Young’s modulus. The beneficial effect of albumin was demonstrated by upregulation of osteogenic and angiogenic gene expression. Furthermore, mineralisation, extracellular matrix production and formation of vessel-like structures were enhanced in albumin-enriched fibrin hydrogels compared to fibrin hydrogels. Collectively, the results indicate that the albumin-enriched fibrin hydrogel is a promising bio-matrix for bone tissue engineering and orthopaedic applications.

Influenced by historical background, regional economic development, and the frequent occurrence of armed conflict, the human–earth relationship in the Central and Southern Peninsula, which is located in a "fragmented zone", is characteristic of the region. The Indochina Peninsula has now become an area of interest for the study of spatial changes in production–living–ecological spaces (PLES). Taking the Indochina Peninsula as the study area, this paper explores the evolution of the spatio-temporal patterns of PLES and its driving mechanism in the Central and Southern Peninsula, from 2010 to 2020, based on the grid scale. Methods such as the land-use transition matrix, land-use dynamics index, and Geographically and Temporally Weighted Regression (GTWR) were used in our model. Our results show that, from 2010 to 2020, ecological space dominated the PLES pattern on the Indochina Peninsula but its area gradually decreased, accompanied by a sharp increase in the areas of productive and living spaces. The area of PLES interconversion on the Indochina Peninsula in 2010–2020 was 212818.70 km2, and it is characterized by the conversion of ecological space into productive space, as well as the interconversion of woodland ecological and grassland ecological spaces. In addition, the intertransfer of production and ecological spaces was distributed in a network-like manner throughout the Indochina Peninsula, while the transfer of living space was distributed in a point-like manner. The migration path of the center of gravity of PLES on the In-dochina Peninsula demonstrates a significant directional difference. The PLES’s pattern evolution was affected by the degree of multiple factors, with a significant spatial and temporal heterogeneity. The positive and negative feedback effects of the factors were distributed in different areas and in different transfer directions.

Zika virus (ZIKV) is a mosquito-borne flavivirus and causes an infection that is associated with neurological manifestations, including microcephaly and Guillain-Barre syndrome. The mechanism of ZIKV-mediated neuropathogenesis is not well understood. In this study, we discovered that ZIKV induces the degradation of the Numb protein, which plays a crucial role in neurogenesis by allowing asymmetric cell division during embryonic development. Our data show that ZIKV reduced the Numb protein level in a time- and dose-dependent manner. However, ZIKV infection appears to have minimal effect on the Numb transcript. Treatment of ZIKV-infected cells with a proteasome inhibitor restores the Numb protein level, which suggests the involvement of the ubiquitin-proteasome pathway. In addition, ZIKV infection shortens the half-life of the Numb protein. Among the ZIKV proteins, the capsid protein significantly reduces the Numb protein level. Immunoprecipitation of the Numb protein co-precipitates the capsid protein, indicating the interaction between these two proteins. These results provide insights into the ZIKV-cell interaction that might contribute to its impact on neurogenesis.

This paper is mainly based on a stricter premise of the twin paradox and the assumption of inertial frame, discusses the properties of time and space under the premise of complete symmetry, and draws an interesting conclusion: the simultaneity of different reference frames is possible realized, and the space is relatively independent. And based on this, the twin paradox, cosmic inflation, ultra-distance action of quantum entanglement, microscopic space motion of particles, measurement problems and other phenomena are tentatively explained from a new angle. This interpretation is exploratory and new. At the same time, the author also proposes an experimental way to test the relative independence of space.At the same time, this paper attempts to strictly prove that Einstein's definition of simultaneity and spatial absoluteness in special relativity may be problematic.

Oral and parenteral delivery of first-line anticonvulsant Valproic cid (VA) are associated with serious adverse effects, high hepatic metabolism, high clearance, and low bioavailability in brain. GastroPlus program was used to predict in vivo performance of immediate (IR) and sustained release (SR) products in human. HSPiP software predicted excipients with maximum possible miscibility of the drug. Based on GastroPlus and HSPiP program, various excipients were screened for experimental solubility study and prepared cationic nanoemulsions and respective gels for nasal to brain delivery. These were characterised for size, size distribution, polydispersity index, zeta potential, morphology, pH, % transmittance, drug content, and viscosity. In vitro drug release, ex vivo permeation profile (goat nasal mucosa), and penetration studies were conducted. Result showed that in-vivo oral drug dissolution and absorption were predicted as 98.6 mg and 18.8 mg, respectively from both tablets (IR and SR) at 8 h using GastroPlus. The drug access to the portal vein was relatively predicted high in IR (115 mg) as compared to SR (82.6 mg). Plasma drug concentration-time profile predicted was in good agreement with published reports. The program predicted duodenum and jejunum as the prime site of drug absorption and no effect of nanonization on Tmax for sustained release formulation. Hansen parameters suggested suitable selection of excipients. The program recommended for nasal to brain delivery of the drug using cationic mucoadhesive product. The optimized stable CVE6 was associated with optimal size (113 nm), low PDI (0.26), high zeta potential (+34.7 mV), high transmittance (97.8%), and high strength (0.7 %w/w). In vitro release and ex vivo permeation of CVE6 were found to be substantially high as compared to anionic AVE6 and respective gels. Penetration study executed high fluorescence intensity with CVE6 and CVE6-gel as compared to suspension and ANE6 which may be attributed to electrostatic interaction between mucosal membrane and nanoglobules. Thus, cationic nanoemulsion and respective mucoadhesive gel are promising strategy for delivery of VA to brain through intransal administration for the treatment of seizure and convulsion.

The purpose of this article is to present the COVID-19 pandemic disruptions occurring in the supply chain of automotive companies, taking into account the type of business. The specific objectives are: to identify and characterise the types of enterprises operating in automotive supply chains, to identify changes during the pandemic in automotive enterprises, depending on the type of activity, to show disruptions in automotive supply chains and ways to counteract these disadvantages depending on the type of activity. Automotive enterprises operating in Poland were selected for the study purposefully. A random selection method was used to select 500 automotive companies for the study. The data sources were surveys conducted in June 2023 among 500 enterprises in the form of a face-to-face telephone interview. Automotive companies experienced supply chain disruptions, regardless of the type of business. Most often, these were caused by lockdowns and official closures, low stocks of materials and products, and problems with employees. There was no difference by type of business. Disruptions were most often short-lived, up to 1 year. Companies countered disruptions by using mostly operational measures, which were short-lived. Only a small percentage of operators made strategic decisions and countered disruptions over a longer period. The scale of these actions was greater among manufacturers than among dealers and car service companies.

Abstract Aim of the study: Presentation of ophthalmic symptoms of Cerebral Autosomal Dominant Arteriopathy with Subcortical Infracts and Leucoencephalopathy (CADASIL). Material and methods: Clinical presentation of female patient with diagnosed CADASIL, manifested by transient loss of vision, migraine, convergence insufficiency, diplopia, increased deep tendon reflexes of upper left limb, subcortical infarcts, mood disturbances and dementia. Results: Confirmed NOTCH3 gene mutation (p.Cys212Gly), and presence of granular osmiophilic material (GOM) in cutaneous small vessel wall in immunohistochemistry laboratory test (IHC). Magnetic resonance imaging (MRI) revealed bilateral focal vasogenic lesions in white matter of cerebral hemisphere with single micro-focal infarct in the left external capsule. Furthermore, a left eye exophoria, a bilateral peripheral visual field loss of 20 degrees and a loss of nasolabial fold was confirmed during ophthalmic tests. An eye fundus examination as well as a fluorescein angiography (FA) revealed vessel constriction of retinal arteries and a peripheral retinal pigment epithelium (RPE) atrophy with focal drusen in the left eye. The doppler ultrasonography (USG) confirmed a decreased blood flow and an increased vascular resistance of the extraocular vessels. The pattern electroretinogram (PERG) revealed a reduced P50 wave amplitude in the patient’s left eye. Conclusions: intermittent blindness, migraine, convergence failure, diplopia with specific MRI signs, NOTCH3 mutation, and the presence of GOM in the skin of small blood vessels in a young or middle-aged patient suggests CADASIL. New observations include: atrophic changes in the RPE, hemodynamic disturbances in blood flow in the short posterior ciliary arteries and in the central retinal artery, single drusen in the retina, and a reduced amplitude of the P50 wave in PERG.

The Source Region of the Yellow River (SRYR), renowned as the "Water Tower of the Yellow River", serves as an important water conservation domain in the upper reaches of the Yellow River, significantly influencing water resources within the basin. Based on the Weather Research and Forecasting (WRF) Model Hydrological modeling system (WRF-Hydro) model, the key variables of the atmosphere-land-hydrology coupling processes over the SRYR during the 2013 rainy season are analyzed. The investigation involves a comparative analysis between the coupled WRF-Hydro and the standalone WRF simulations, focusing on the hydrological response to the atmosphere. The results reveal that the WRF-Hydro model's proficiency in depicting streamflow variations over the SRYR, yielding a Nash Efficiency Coefficient (NSE) of 0.44 and of  0.61 during the calibration and validation periods, respectively. Compared to the standalone WRF simulations, the coupled WRF-Hydro model demonstrates enhanced performance in soil heat fluxes simulations, reducing the mean Root Mean Square Error (RMSE) of surface soil temperature by 0.96 K and soil moisture by 0.01 m\textsuperscript{\textsuperscript{3}}/m\textsuperscript{\textsuperscript{3}}. Furthermore, the coupled model adeptly captures the streamflow variation characteristics with the NSE of 0.33. This underscores the significant potential of the coupled WRF-Hydro model for delineating coupled atmosphere-land-hydrology processes in regions characterized by cold climates and intricate topography.

Abstract Unlike accelerated motion or curvalinear motion,a nonlinear motion state(non-inertial system) can be described by differential equations or the other algebric equations in axiom 2, the accelerated motion in axiom 3 can be considered to be described by using the equation of the linear and curvilinear process of the continuum extending to infinitely distance.Further, this linear and curvilinear process of the continuum is a quantitative continuum in essence as a unity of infinitely quantities and infinitely dimensions at infinite distance (infinity) relative to all orientations in which we exist. These indicates that an accelerated motion accumulates continuously started from a finite quantities, leaping to transit from finite to infinite quantities by an infinitely great accelerating force.

As the global population rapidly ages with longer life expectancy and declining birth rates, the need for healthcare services and caregivers for older adults is increasing. Current research envisions addressing this shortage by introducing domestic service robots to assist with daily activities. The successful integration of robots as domestic service providers in our lives requires them to possess efficient manipulation capabilities, provide effective physical assistance, and have adaptive control frameworks that enable them to develop social understanding during human-robot interaction. In this context, human factors, especially quantifiable ones, represent a necessary component. The objective of this paper is to conduct an unbiased review encompassing studies on human factors studied in research involving physical interactions and strong manipulation capabilities. We identified the prevalent human factors in physical human-robot interaction (pHRI), noted the factors typically addressed together and determined the frequently utilized assessment approaches. Additionally, we gathered and categorized proposed quantification approaches based on measurable data for each human factor. We also formed a map of common contexts and applications addressed in pHRI for a comprehensive understanding and easier navigation of the field. We found out that most of the studies in direct pHRI (when there is direct physical contact) focus on social behaviors with belief being the most commonly addressed human factor type. Task collaboration is moderately investigated, while physical assistance is rarely studied. In contrast, indirect pHRI (when the physical contact is mediated via a third item) studies often involve industrial settings, with physical ergonomics being the most frequently investigated human factor. More research is needed on human factors in direct and indirect physical assistance applications, including studies that combine physical social behaviors with physical assistance tasks. We also found that while the predominant approach in most studies involves the use of questionnaires as the main method of quantification, there is a recent trend that seeks to address quantification approaches based on measurable data.

Of the roughly 20,000 canonical human protein sequences, as of September 15, 2020, 6,937 proteins have had their full or partial, medium- to high-resolution structures determined by x-ray crystallography or other methods. Which of these proteins dominate the Protein Data Bank (the PDB) and why? In this paper, we list the 273 top human protein structures based on the number of their PDB entries. This set of proteins accounts for more than 40% of all available human PDB entries and represent past trends as well as current status for protein structural biology. We briefly discuss the relationship which some of the prominent protein structures have with protein research as a whole and mention their relevance to human diseases. The top-10 soluble and membrane proteins are all well-known (most of their first structures being deposited more than 30 years ago). Overall, there is no dramatic change in recent trends in the PDB. Remarkably, the number of structure depositions has grown nearly exponentially over the last 10 or more years (with a doubling time of 7 yrs for proteins from all organisms). Growth in human protein structures is slightly faster (at 5.9 yrs, while E.Coli and Mouse+Rat protein structures accumulate more slowly, Zebrafish protein structures are growing most, at a doubling every 3.7 years, albeit starting from only approx. 100 structure entries in 2010). The information may be informative to senior scientists but also inspire researchers who are new to protein science, providing the year 2020 snap-shot for the state of protein structural biology.

It has been a challenge to visualize in nature some concepts from abstract subjects such as mathematics and philosophy. Irrationality is certainly among the least comprehensive. This essay aimed to propose that irrationality is simply an illusion resulting from the human inability to grasp the full nature of reality, rather than actual continuity flaws in the fabric of existence. There are three major arguments: (1) human senses have limitations and these are likely to be extended to the intellect, (2) there are no observable existential discontinuities in everyday experience, and (3) some rational phenomena have irrational components. These arguments point towards the existence of a physical existence of irrational quantities or distances, visible to the human eye but not fully comprehended through arithmetic abstraction.

The human virome is an area of increasing interest with relation to human health and disease. It has been demonstrated to alter in concert with the bacterial microbiome in early life and was also found to be different in patients with certain diseases such as inflammatory bowel disease. However, all virome analyses are hampered by a lack of annotated representative database sequences, often referred to as the ‘viral dark matter’. Here we provide the first description of the gut DNA virome in elderly individuals (>65 years old) as well as the description of novel bacteriophages not present in current reference databases. Diversity analysis comparing elderly persons from different residence locations (community living vs long term care facilities) did not reveal any difference in their virome diversity profiles despite the reported differences at the bacteriome level. An abundance of Microviridae of the subfamily Gokushovirinae were present in the faeces of elderly individuals. Several novel members of the order Caudovirales were also characterized and annotated. Assignment of host bacteria to detected viral genomes was attempted using a combination of CRISPR spacers, tRNA genes and a probabilistic approach. Further characterization of the viral dark matter is necessary for developing tools and expanding databases to study the human virome. This study focused on the virome of an aging human cohort with the goal of illuminating part of the viral dark matter.

The purpose of this paper is to demonstrate the existence of an artificial magnetic monopole and to introduce new electromagnetic equations by altering an electric field and a magnetic field vectors.As a principle device, a cylindrical condenser is prepared, and a superconducting loop is inserted into it. By this conduction, radial electric fields take a role as the centripetal force and both counterclockwise and clockwise motions are induced. As a result, a stationery wave is formed in which the nodes take a part in creating a monopole as follows.First, employing the Lorentz conservations and because node of the stationary wave has no phases, the momentum k and the vector potential A vanish and instead a magnetic potential appears in order to maintain the Lorentz conservation. This magnetic potential has relationship with an electric potential, and thus consequently, a dependent relationship is obtained between an electric field and a magnetic field vectors. Using this conclusive dependent relationship, we can derive new Maxwell equation assembly which are created by altering the electric field and the magnetic field vectors. In this process, we derive a divergent equation of magnetic fields which is not zero, i.e., the existence of a magnetic monopole. Employing these newly derived Maxwell equation, an electromagnetic wave is derived whose speed is the same as one the existing Maxwell equations provide. As a monopole configuration, this paper discusses the energy gap of the vacuum, which is a result of the Dirac equation and describes a monopole as pairs between two Cooper pairs (i.e. four electrons) whose interaction is a photon. As mentioned, because the total momenta and phases are zero, this paper defines the wave function as the Dirac function and demonstrate the condensation, employing the Bloch’s theorem. Moreover, using the macroscopic basic equations, we retrace the creation of the divergent magnetic field in view of macroscopic phenomenon., which provides results in this paper.In Result section in this paper, we succeeded in demonstrating the distribution of the divergent magnetic field of monopole in terms of both microscopic and macroscopic scales. Furthermore, Discussion section describes properties a magnetic monopole should follow.

Background &amp; Aim: Drug sustainability (DS) is a surrogate marker for treatment efficacy. We aimed to compare the DS of two main biologics used to treat moderate-to-severe ulcerative colitis (UC), infliximab (IFX) and vedolizumab (VDZ), in a real-world setting. Methods: We conducted a retrospective cohort study at a tertiary medical center in Israel. We included patients treated between Dec 1st, 2017, and May 1st, 2021, who were followed for up to 300 weeks. DS was defined as corticosteroid, surgical, and hospitalization-free treatment. Results: 217 patients with UC were included. VDZ had a significantly longer median DS of 265.6 weeks compared to IFX's 106.5 weeks (p=0.001) in treatment-naïve patients, even when adjusting for disease severity (HR 0.55 95 CI 0.3-0.98, p=0.042). In treatment-experienced patients, DS was comparable between IFX and VDZ (p=0.593). Conclusion: VDZ showed significantly longer DS in treatment-naïve patients with UC compared to IFX, also when adjusted for disease severity. There was no difference in DS between VDZ and IFX in treatment-experienced patients and patients switching from one drug to another. VDZ may be a suitable first-line treatment for biologic-naïve patients with moderate-to-severe UC.

Background: Cancer has been one of the most critical health problems during the past decades which require serious consideration, especially in developing countries. Methods: 80 parents of the children with different types of cancers were studied via both questionnaire and person-to-person interview after announcing their informed consent. Results: The highest delay in patients' initial referral was due to the following factors: lack of attention or ignoring the first symptoms, delay in referring to the physician, low economic status and even lack of family support for the patient. In addition, visiting several doctors after the initial diagnosis, uncertainty about the first proposed method, and high cost of treatment can be mentioned as the main causes of delays in the start of treatment. Conclusion: Education plays an important role in identifying the signs of cancer. In addition, proper relationship and cooperation between the health system and physicians as well as provision of adequate information to patients could lead to the long-term cooperation of these patients in continuing their treatment.

Advances in biological sciences have been applied in medicine, agriculture and industry with great benefit. Some recent trends in society, governance structures and communications, however, appear to be hampering the use of new scientific findings for controlling infectious diseases. These limitations are illustrated with examples related to (i) the adaptation of fresh water mosquito vectors of major arboviral diseases to salinity in coastal areas with consequences for disease transmission, (ii) understanding the implications of reduced dengue transmission during the COVID-19 lockdown for dengue control, (iii) causes underlying the rapid spread of the malaria vector Anopheles stephensi in South Asia and Africa, (iv) the application of serodiagnostic techniques for Lyme disease and tick-borne relapsing fever caused by tick-borne bacteria of the genus Borrelia, and (v) COVID-19 prevention.

The 3x+1 problem asks the following: Suppose we start with a positive integer, and if it is odd then multiply it by 3 and add 1, and if it is even, divide it by 2. Then repeat this process as long as you can. Do you eventually reach the integer 1, no matter what you started with? Collatz conjecture (or 3n+1 problem) has been explored for about 85 years. In this paper, we convert an integer number from decimal to binary number, and convert the Collatz function to binary function, which is multiplication and division of two binary numbers. Finally the iternation of the Collatz function, eventually reach the integer 1, thus we solve the 3x+1 problem completely.

Here, we propose a prescriptive simulation model of a process operator’s decision-making assisted by artificial intelligence (AI) algorithm in a technical system control loop. We analyze situations fraught with a catastrophic threat that may cause unacceptable damage. Operators’ decision-making is interpreted in terms of a subjectively admissible probability of disaster and subjectively necessary reliability of its assessment. We distinguish four extreme decision-making strategies corresponding to different ratios between the above variables. An experiment simulating a process facility, an AI algorithm and operator's decision-making strategy was held. It showed that depending on the properties of a controlled process (the speed of hazard onset) and the AI algorithm characteristics (Type I and II error rate), each of such strategies or some intermediate strategy may prove to be more beneficial than others. The same approach is applicable to the identification and analysis of sustainability of strategies applied in real-life operating conditions, as well as to the development of a computer simulator to train operators to control hazardous technological processes using AI-generated advice.

Reinvigorated public interest in human space exploration has led to the need to address the science and engineering challenges described by NASA's Space Technology Grand Challenges (STGCs) for expanding the human presence in space. Here we define Space Bioprocess Engineering (SBE) as a multi-disciplinary approach to design, realize, and manage a biologically-driven space mission as it relates to addressing the STGCs for advancing technologies to support the nutritional, medical, and incidental material requirements that will sustain astronauts against the harsh conditions of interplanetary transit and habitation offworld. SBE combines synthetic biology and bioprocess engineering under extreme constraints to enable and sustain a biological presence in space. Here we argue that SBE is a critical strategic area enabling long-term human space exploration; specify the metrics and methods that guide SBE technology life-cycle and development; map an approach by which SBE technologies are matured on offworld testing platforms; and suggest a means to train the next generation spacefaring workforce on the SBE advantages and capabilities. In doing so, we outline aspects of the upcoming technical and policy hurdles to support space biomanufacturing and biotechnology. We outline a perspective marriage between space-based performance metrics and the synthetic biology Design-Build-Test-Learn cycle as they relate to advancing the readiness of SBE technologies. We call for a concerted effort to ensure the timely development of SBE to support long-term crewed missions using mission plans that are currently on the horizon.

A simple line of reasoning, based on the most fundamental concepts of thermodynamics, yields some intriguing results for a better understanding of the processes occurring in the observable Universe. Gravitational mass must be continuously generated within an expanding thermodynamic system for this system to remain closed. The Second Law is a direct consequence of this production of mass. Simple expressions for the entropy and temperature of the Universe were obtained and the results agree well with observable values. Furthermore, it is demonstrated that the conservation laws within the Universe are independent of its energy density. Based on the solution for the quantum state of the Universe, it is conjectured that the Second Law is incomplete and must be complemented to a conservation law, which takes into account the growth of the amount of information within the Universe. Once the Second Law is complemented to a conservation law, the importance of mass generation within the Universe becomes well pronounced – not only gravitational effects play the role of an organising force, but also the amount of mass within the Universe defines both the amount of information within the Universe and the level of the Universe’s complexity.

Propolis, or bee glue, is a complex mixture of resins from plant buds and flowers, wax, pollen and bee saliva. It also contains various vitamins, essential oils, mineral salts, trace elements, hormones and enzymes. It has been found that propolis possesses antimicrobial, antiviral and anti-inflammatory properties. We have studied the antiviral activity of six extracts of Bulgarian propolis collected from six districts of Bulgaria. The study was conducted against structurally different viruses: Human coronavirus strain OC-43 (HCoV OC-43) and Human respiratory syncytial virus type 5 (HRSV-5) (enveloped RNA viruses), Human herpes simplex virus type 1 (HSV-1) (enveloped DNA virus), Human rhinovirus type 14 (HRV-14) (non-enveloped RNA virus) and Human adenovirus type 2 (HadV-2) (non-enveloped DNA virus). The influence of the extracts on the internal replicative cycle of viruses was determined using the cytopathic effect (CPE) inhibition test. The virucidal capacity, their influence on the adsorption stage and their protective effect on uninfected cells were also determined by the end-point dilution method. Residual viral infectivity in propolis samples was compared to untreated controls and Δlgs were calculated. When administered during viral replication, most propolis extracts demonstrated the strongest activity against HCoV OC-43. The influence of propolis extracts on the viability of extracellular virions was expressed to a different degree in the various viruses studied, and the effect was significantly stronger in those with an envelope. Almost all extracts significantly inhibited the step of herpes virus adsorption to the host cell, and some of them showed a protective effect on healthy cells before they were subjected to herpes infection. Our results enlarge the knowledge about the action of propolis and could open new perspectives for its application in viral infections treatment.

Aymaraism, as a socio-cultural phenomenon, has given rise to components and elements of representativeness in the population of the Andes. However, the dialectic component of the Aymara as a nation is annulled by fundamental historiographical elements that underlie this process of identification. The empirical analysis of the historical data leads us to conclude that the Aymara language and culture contain ambiguous elements that cannot be defined according to the dialectical interpretation and the current narrative. Thus, the analysis of the cultural, linguistic and social elements of this population from the Early Horizon period to the present confirms the historical distortion towards a narrative component of origin and presence in the territory of the Qullasuyu, in the current geographical area of the Collao. In order to understand this phenomenon, this work promotes the complementarity of the analysis through the use of ethnoarchaeological and documentary elements in order to clarify the origin, synthesis and development of the Aymara from a historical perspective, leaving aside the dialectical component of the present.

The Particle-In-Cell (PIC) method has been developed in order to investigate microscopic phenomena, and with the advances of computing power, newly developed codes have been used for several fields such as astrophysical, magnetospheric, and solar plasmas. PIC applications have grown extensively with large computing powers available on supercomputers such as Pleiades and Blue Waters in the US. For astrophysical plasma research PIC methods have been utilized for several topics such as reconnection, pulsar dynamics, non-relativistic shocks, relativistic shocks, relativistic jets, etc. PIC simulations of relativistic jets have been reviewed with the emphasis on the physics involved in the simulations. This review summarizes PIC simulations, starting with the Weibel instability in slab models of jets, and then focuses on global jet evolution in helical magnetic field geometry. In particular we address kinetic Kelvin-Helmholtz instabilities and mushroom instabilities.

The traditional receiver employs scalar tracking loops, resulting in degraded navigation performance in weak signal and high dynamic scenarios. An innovative design of a vector tracking receiver based on nonlinear Kalman filter (KF) tracking loops is proposed in this paper, which combines the strengths of both vector tracking and KF tracking loops. Firstly, a comprehensive description of the vector tracking receiver model is presented, and unscented Kalman filter (UKF) is applied to nonlinear tracking loop. Secondly, to enhance the stability and robustness of the KF tracking loop, we introduce square root filtering and an adaptive mechanism. The tracking loop based on square root UKF (SRUKF) can dynamically adjust its filtering parameters based on signal noise and feedback Doppler error. Finally, the proposed method is implemented on a software-defined receiver (SDR), and the field vehicle experiment demonstrates the superiority of this method over other receivers in complex dynamic environments.

The upregulated expression of thyrosine kinase AXL has been reported in several hematologic and solid human tumors including gastric, breast, colorectal, prostate, and ovarian cancers. Thus, AXL can potentially serve as a diagnostic and prognostic biomarker for various cancers. This paper reports the first-ever use of loop-mediated isothermal amplification (LAMP) of the AXL gene as a diagnostic method for ovarian cancer. We demonstrated simple instrumentation toward a point-of-care device to perform LAMP. This paper also reports the first-ever use of core-shell beads as a microreactor to perform LAMP as an attempt to promote environmentally friendly laboratory practices.

(1) Background: Presentation of the method of increasing the competitiveness of the mining industry through the demonstration of the possibility and potential in closing the loop of supply chains through waste management; (2) Methods: The source literature analysis and an arithmetic analysis of the data of statistical materials and data obtained from business in static and dynamic perspectives; (3) Results: According to the latest data available, in Poland, mining wastes account for over a half of industrial wastes, while the annual growth of mining wastes is on the level of 4%. The recorded recovery of mining wastes is on the level of ca. 19%. The exemplary company that deals with the recovery of carbon wastes recovers ca. 80% of material, which is handed over for utilization (4) Conclusions: It has been found that the structure of the level of mining wastes and the level of their recovery rates demonstrate a large potential of closing the loop of chains in this industry and, at the same time, a potential to extend the chains through directing the material from recovery to various sectors. This constitutes an example of the direction of activities that are in line with the EU strategies for the economies of other states which possess this type wastes.

The feed-forward loop (FFL) is an important and basic network motif to understand specific biological functions. Cyclic-AMP (cAMP) receptor protein (CRP), a transcription factor (TF), mediates catabolite repression and regulates more than 400 genes in response to changes in intracellular concentrations of cAMP in Escherichia coli. CRP participates in some FFLs like araBAD and araFGH operons and adapt to fluctuating environmental nutrients thus enhancing the survivability of E. coli. Although computational simulations have been used to explore the potential functionality of FFLs, a comprehensive study of the functions of all structural types based on in vivo data is lacking. Also, the regulatory role of CRP-mediated feed-forward loops (CRP-FFLs) remain unclear to date. Using EcoCyc and RegulonDB, we identified 393 CRP-FFLs in the E. coli. Dose-response genomic microarray of E. coli revealed dynamic gene expression of each target gene of CRP-FFLs in response to a range of cAMP dosages. All eight types of FFLs were present in CRP regulon with various expression patterns of each CRP-FFL, that were further divided into five functional groups. Microarray and reported regulatory relationships identified 202 CRP-FFLs which were directly regulated by CRP in these eight types of FFLs. Interestingly, 30% (147/482) of genes were directly regulated by CRP and CRP-regulated TFs, indicating that these CRP-regulated genes were also regulated by other CRP-regulated TFs responding to environmental signals through CRP-FFLs. Furthermore, we applied gene ontology annotation to reveal the biological functions of CRP-FFLs.

Age-related diseases (ARDs) are the leading cause of death worldwide, and contribute to 90% of mortality in developed countries. Interestingly, the mortality rates of individual ARDs increase exponentially with age. Processes described by the exponential growth function typically involve a branching chain reaction or, more generally, a positive feedback loop. Here I propose that each ARD is mediated by one or several positive feedback loops (vicious cycles). I then identify critical vicious cycles in five major ARDs: atherosclerosis, hypertension, diabetes, Alzheimer’s and Parkinson’s. I also propose that the progression of ARDs can be halted by selectively interrupting the vicious cycles and suggest the most promising targets. An evolutionary perspective is also offered.

The Ayers Rock of Australia which is known for its charming colors at different time is actually the Celestial Body Ring of the planet Earth that implies the great Celestial Body Love happened on Earth long long ago. The Tasmania island of Australia which is known for the World Heart is actually in the state of face to face with the main island of Australia, which implies the image spokesperson for the inner core (the heart) of the planet Earth. In other words, with the outline of the main island of Australia, the basic key information of the inner core of the planet Earth could be easily obtained by deducing logically, just like the similarity between the fists and heart of human body. Similar to the mechanism of the blood circulation dominated by the heart of human body, it is dominated and motivated by the inner core of the Earth which forms the circulation of mantle magma between the crust and the inner core, and what leads to the formation of expanding and active area on the equatorial and middle-lower latitude area and the silent and convergent area on the North and South Pole central area. Therefore, the mantle magma whirlpools under the crust on the North and South Pole are supposed to exist logically. The walking sideways of the crabs just implies the celestial body language of the motive trend of the main island of Australia based on their similar outline.

Given the broad and intense use of plastic, society is being increasingly affected by its degradation and by-products, particularly by microplastics (MPs) -fragments smaller than 5 mm in size-, and nanoplastics (NPs) -with sizes less than 1 µm. MPs and NPs may enter the body primarily through inhalation, consumption, and skin contact. Once ingested, MPs can penetrate tissues, deviating to other parts of the body, and hence potentially affecting important cellular pathways such as nonconforming chemokine receptors that control the communication between the fetus and the mother. Consequently, the potential health harm induced by MP internalization is a major issue, evidenced by multiple studies demonstrating harmful consequences in diverse animal models and human cells. Here, an overview of the various modes of exposure to MPs and NPs is presented, including inhalation, placental transfer, ingestion, breastmilk consumption, and skin absorption, as well as placental and fetal toxicity due to plastic particles based on animal and in vitro studies. Though MPs in our environment are becoming more recognized, their developmental toxicity is still scarcely known. Besides negatively affecting pregnancy, MPs and NPs have been shown to potentially harm the developing fetus, given their ability to cross the placental barrier. Still, considerable gaps remain in our understanding of the dispersion and toxicity of these particles in the environment, as well as the precise types of NPs and MPs bearing the greatest dangers. As a result, we advocate for larger-scale epidemiological investigations, the development of novel approaches for measuring NP and MP exposures, and the necessity of understanding the toxicity of various kinds of NPs to guide future research efforts.

In this work, we designed a MEMS device which allows simultaneous direct measurement of mechanical properties during deformation under external stress and characterization of the evolution of microstructure of nanomaterials within a transmission electron microscope. This MEMS device makes it easy to establish the correlation between microstructure and mechanical properties of nanomaterials. The device uses piezoresistive sensors to qualitatively measure the force and displacement of nanomaterials, e.g., in wire and thin plate forms. The device has a theoretical displacement resolution of 0.19 nm and a force resolution of 2.1 μN. The device has a theoretical displacement range limit of 2.74 μm and a load range limit of 27.75 mN.

The history of health records (later also called medical records), including ones regarding individual patients, is thousands of years old. It finds it roots in the first ancient civilisations. Up until the 19^th century the records’ purpose was mainly an educational one. In the 19^th and 20^th century they started becoming significant in other roles as well, including those not strictly limited to medicine. In particular, to account for medical procedures, insurance proceeds or legal action. Currently we are living in a revolutionary era when it comes to health records, in which their character has changed from a “paper-based” to an electronic one. This paper presents the development of health records from the ancient to modern times, mainly in Europe and North America. Other cultures and civilisations, including China and India, are not discussed. An analysis of available sources was conducted, inter alia digital versions of manuscripts up to hundreds of years old. The analysis was based on PubMed and Google Scholar (several key words, all the available sources). Sources published in non-international languages (e.g. Dutch) were also investigated. Overall, approximately 600 articles were analysed, 158 of which were used and cited in this paper. The conclusions drawn from the analysis are as follows: (1) Health records, priorly used mostly for educational purposes, for about 100 years now have acquired a fully formal status. (2) We are currently facing the most revolutionary changes regarding the transformation of paper-based records into electronic ones. (3) The consequences of this process include systematic applications of solutions within the area of e-health, which allow us to make medical services more flexible, improve the health of individual patients and entire populations and potentially limit expenditure. (4) In the light of the ongoing COVID-19 pandemic, introducing electronic health records could be beneficial in terms of limiting the potential sources of contamination (physical copies of health records), saving time and resources, and improving the network of communication between medical centres.

Perhaps the greatest challenge in the graft copolymerization of acrylic acid onto starch initiated by Fenton’s is the selectivity of the grafting reaction. Low selectivity means that too much of unwanted homopolymer polyacrylic acid is produced. In this paper, it has been analyzed why with this reaction system, involving a water soluble monomer and indirect initiation, the graft selectivity is such a challenge. Several other grafting reactions, especially with monomers of low water solubility or when direct initiation is applied, show a better grafting performance. A scheme is presented based on reaction engineering principles, that supports an explanation of the observed differences. A more selective activation of starch is a factor, but perhaps even more important is a low monomer to starch ratio at the starting sites of graft reactions. Based on these insights, several methods to improve the graft selectivity are evaluated, with the help of literature data but mostly by experimental explorations in our laboratory. Most promising appears to be a dedicated dosage method, to add monomer in portions over time, tested in a batch reactor with gelatinized cassava starch. This way, both grafting percentage and graft selectivity could be improved. Such could not be realized with the more conventional dosage, which is to add all monomer before the start of the reaction. This can be considered a principal breaktrough. Still, more research and development would be needed to refine the method and to implement the idea also in a continuous reactor at larger scale.

The size of the home is considered the most critical issue affecting the quality of life. This can be measured by the quality of the house and its environment. This paper highlights the housing quality index at the urban axis level in Bistrita-Nasaud county and the impact of socioeconomic activities on the index. The Household Quality of Life Index (HQLI) was calculated based on 11 variables. Household quality of life comprises two distinctive indices: the Housing Conditions Index (HCI) and the Asset Possession Index (API). The study found a variation in the housing condition variables across the urban focus areas. The impact of the socioeconomic environments is disproportionately dependent on the social-economic profile of the urban environments that make up the Urban Axis and the related economic activities that take place in the area of influence in the administrative-territorial units and the variability of the Housing Conditions Index This can be measured by the quality of the house and its environment. This paper highlights the housing quality index at the urban axis level in Bistrita-Nasaud county and the impact of socioeconomic activities on this index. The study area comprises territories in the municipality of Bistrita. The socio-economic context of the area has been the basis for understanding the patterns of evolution identified in the urban landscape, and being a driver in ongoing urban transformations and processes. The impact of the socio-economic is disproportionate to the socioeconomic profile of the urban environments that make up the Urban Axis and the economic activities related to the economic activities taking place in the catchment area in the administrative-territorial units, hence the variability of the Housing Conditions Index which is a system Housing Quality Indicator (HQI) is a tool for measuring and evaluating housing systems based on quality and not just cost.

It is claimed that classical mechanics (CM) in terms of its equivalent Koopman-von Neumann formulation (KvN) is indeed a ’real’ quantum theory since the formalism of quantum mechanics (FQM) does not, nor need it, exclude it as a such. This claim is made manifest by suggesting a common structure of which both KvN and ordinary quantum mechanics (OQM) correspond to unitary representations of, although unitarily inequivalent such. It is shown that OQM is obtained by enforcing the extra physical condition of quantized energy levels, which by itself does not constitute the ’quantum mystery’. It is furthermore shown that KvN in a physically realizable sense contain the hallmark quantum behavior of quantum interference. It is hence concluded that both CM and OQM are subjected to the same foundational issues. As the central part of both KvN and OQM is the introduction of probabilities via FQM it is suggested that the foundational issues regarding FQM are less about FQM itself and more about the concept of probability.

The article discusses determinants of living environment in Central and Eastern Europe. As an example, the city of Radzionkow was chosen, with 16 thousand inhabitants, located in the Silesia agglomeration in southern Poland, in the area where hard coal has been mined for almost two hundred years, which largely serves as a source of heating for houses and flats. 360 buildings in 6 groups of 60 buildings were examined in the selected city, which allowed to distinguish 3 different areas in terms of the quality of the living environment depending on the technical condition of buildings, the method of heating and location. To a large extent, determinants are the existing spatial and geophysical conditions of a given location. Many research and reports on the living environment do not take into account the factors mentioned, focusing only on the statistical data of pollution, excluding spatial factors. In the research presented, the author, taking into account location variables, shows differences in the measurements of air pollution in relation to the designated location zones depending on the morphological structure of the building, the degree of its modernization and the types of heating used in buildings.

Current article presents the study of psychological wellbeing of adolescents (n=168, age 15-17) gifted in math, humanities and sports and educated in advanced programs for gifted children. Theoretical framework of this study is eudemonic concept of psychological wellbeing by C. Ryff. Psychological wellbeing is measured with Ryff wellbeing scales in Russian adaptation by L.V. Zhukovskaya and E.G. Troshikhina. The study is aimed at understanding differences in psychological wellbeing of gifted teenagers connected to gender and type of giftedness. The results suggest that general wellbeing score did not differ for adolescents with different types of giftedness or of different genders. Separate components of psychological wellbeing, such as purpose in life and self-acceptance, are influenced by activity connected to the talent. Gender differences are subjected to age-specific trends of personal development in adolescence. Type of giftedness might reinforce these trends.

In China's mountainous coastal terrain, the storm badly damaged low-rise buildings. At present, it is not clear how the relative position of buildings and mountains affects the surface of a low-rise building’s fluctuating coefficient. The study compared these results with the wind pressure distribution without the surrounding environment. The primary objective of this study is to examine the fluctuating coefficient variation rule based on the spacing between hillsides and buildings under 0° wind angle. Additionally, the study analyzes the fluctuating wind pressure coefficient across wind angles between 0°~90°. The distribution of wind pressure in different common hillside landforms was examined through a wind tunnel experiment, which also compared with the distribution in an open environment. The study examined the fluctuating coefficient as the distance between the building and the hillside changed, specifically for wind blowing at a 0° angle. Next, an analysis is conducted on the changing pattern of the fluctuating coefficient for low-rise buildings ranging from a wind angle of 0° to 90°. Simultaneously, the investigation examined the power spectrum and wind pressure’s probability distribution, while considering the proximity of the building to an adjacent hill. The findings indicated that the changing wind pressure factor on the surface of the structure differed based on the relative location of the hillside and the building. The roof's wind pressure coefficient fluctuated and gradually increased until it reached its peak, unaffected by the surroundings. The low-frequency energy decreased in windward eaves, while the high-frequency energy progressively rose as the distance between the hillside and the building increased. The wind pressure on the leeward side exhibited Gaussian characteristics in its probability distribution.

Ancient DNA has given a new vision to the recent history of human evolution. However, by always relying on the information provided by whole genome sequencing, some relevant relationships between modern humans and its archaic relatives have been misinterpreted by hybridization and recombination causes. In contrast, the congruent phylogeny, obtained from non-recombinant uniparental markers, indicates that humans and Neanderthals are sister subspecies, and that the most recent common ancestor of modern humans was not of African origin but Eurasian.

In the wake of the rapid deployment of Small Modular Reactors (SMRs), this study aims to enhance the efficiency, reliability, and safety of SMR operations through a deeper understanding of human factors in their interaction within digital control room systems. Recognizing the pivotal role of human understanding in this new era of nuclear power, we employed electroencephalogram (EEG)-based monitoring to provide an unparalleled real-time view into operators' cognitive states. By interfacing detailed human models, informed by EEG metrics, with specific operational tasks, we recreate potential operational scenarios using an SMR simulator and capture intricate human responses therein. Our results elucidated the intricate relationship between EEG-derived data and human performance shaping factors, indicating a marked correlation between certain EEG patterns and operational efficiencies. Conclusively, these findings underscore the potential of EEG monitoring not only as a diagnostic tool but as an instrumental aid in the design and operation of future SMR digital control rooms. The insights derived offer a roadmap for the development of practical strategies, ensuring more effective and safer SMR operations.

Multimodal user interfaces promise a natural and intuitive human machine interactions. But is the extra effort for the development of a complex multi-sensor system justified, or can users also be satisfied with one input modality already? This study investigates interactions in an industrial weld inspection workstation. Three unimodal interfaces, including spatial interaction with buttons augmented on a workpiece or a worktable, and speech commands, were tested individually and in a multimodal combination. Within the unimodal conditions, users preferred the augmented worktable, but overall, the interindividual usage of all input technologies in the multimodal condition was ranked best. Our findings indicate that the implementation and use of multiple input modalities is valuable, and that it is difficult to predict the usability of individual input modalities for complex systems.