Introduction: Pharmaceutical products are inevitable for human health. Owing to the growing need for pharmaceuticals, pharmaceutical companies introduce drugs annually into the market in addition to the extensive collection of existing pharmaceutical products. Households, farms, health facilities, and pharmaceutical industries release pharmaceutical waste into the environment at low concentrations through routine pharmaceutical use, damage, and expiry. The effects of active pharmaceutical ingredients (API) on non-target species in the environment are not known. Over the years, pharmaceuticals such as diclofenac and ibuprofen in trace amounts have been detected in public water systems, ground and surface water. Unwanted medicines should be safely disposed of at a reduced financial cost to mitigate the public and environmental health risks. Lack of general knowledge of how to dispose of unused pharmaceuticals leads to improper disposal resulting in accidental toxicity, rising healthcare costs, landfills pilfering/scavenging, water supply pollution, anti-microbial resistance, and death. To mitigate such effects, pharmacists should raise public awareness about safe disposal practices. Objective: This review aims to examine the sources of pharmaceutical waste, disposal costs, secure disposal methods, the effects of inappropriate disposal, and the role of pharmacists in the disposal. Method: The information on the stated objectives was gathered from available sources through a comprehensive literature review. Conclusion: Many countries contain tons of pharmaceutical waste that are expensive to destroy. Because of improper disposal, pharmaceutical waste has been found at trace amounts in drinking and surface water. A practical, environmentally sustainable approach to pharmaceutical waste management, with policies and guidelines, and public awareness campaigns, are necessary to address the problem of safe waste disposal. The national drug regulatory bodies should conduct environmental risk assessment resulting from the disposal of unwanted pharmaceuticals. Pharmacists should facilitate extensive training on sustainable drug use and proper pharmaceutical waste disposal at all levels to reduce the risks associated with improper disposal. Reduction of pharmaceutical waste generation at each step of a drug’s lifecycle, implementing takeback options, collection at approved sites, and modern technology to treat wastewater are highly recommended to reduce the effects of unwanted pharmaceuticals on human health and the environment.

The Planning and implementation of construction projects are difficult processes and are burdened with many risk elements. The budget spread over time, which is developed on the basis of the schedule, presents the expected distribution of costs throughout the duration of the works, which during the implementation of the project is subject to constant changes resulting from time, cost and organizational factors. Managing construction contracts requires managers to be able to analyze on an ongoing basis the variances of production costs - from the values calculated in the offer cost estimate and assumed in the Budgeted Cost of Work Scheduled. The article attempts to analyze the emerging time and cost deviations using proprietary T/S and T/C monitoring, based on simple indicators of the EVM method. An example of construction of a multi-family housing development was used to study the variances of planned and incurred costs.

Planning and implementation of construction projects are difficult processes and are burdened with many risk elements. The budget spread over time, which is developed on the basis of the schedule, presents the expected distribution of costs throughout the duration of the works, which during the implementation of the project is subject to constant changes resulting from time, cost and organizational factors. Managing construction contracts requires managers to be able to analyze on an ongoing basis the variances of production costs - from the values calculated in the offer cost estimate and assumed in the Budgeted Cost of Work Scheduled. The article attempts to analyze the emerging time and cost variances using proprietary C-S and S-C monitoring, based on simple indicators of the EVM method. An example of construction of a multi-family housing development was used to study the variances of planned and incurred costs.

In the last years, the development of low-cost GNSS sensors allowed monitoring in a continuous way movement related to natural processes like landslides with increasing accuracy and limited efforts. In this work, we present the first results of an experimental low-cost GNSS continuous monitoring applied to the unstable slope affecting the Madonna del Sasso Sanctuary (NW Italy). The courtyard of Sanctuary is built of two unstable blocks delimited by high cliff. Previous studies and non-continuous monitoring showed that blocks suffer a seasonal cycle of thermal expansion and long-term trend to downslope of few millimeters per year. The presence of continuous monitoring solution, could be an essential help to better understand the kinematics of unstable slope and to recognize the beginning of a possible paroxysm phase that could end with a failure of the unstable area. We tested the accuracy of the instruments and the first year of experimental measurements are presented. We also propose a methodological approach that considers the use of automatized procedures for the identification of anomalous trends and a risk communication strategy based on monitoring data.

Project complexity is usually considered as one of main causes of cost overruns, resulting in poor performance and thus project failure. However, empirical studies focused on evaluating its effects on project cost remain lacking. Given this circumstance, this study attempts to develop the relationships between project cost and the multidimensional project complexity elements. We establish complexity as a multidimensional factor including the task, organization, market, legal, and environment complexities. This study uses an empirical evidence-based structural model to account for the relationships between project cost and project complexity. By doing so, a quantitative assessment of multi-dimensional project complexity has been developed. The findings suggest that task and organization complexities have direct effects on project cost, while market, legal and external environment complexities have indirect effects on project cost. The practical contribution is that the findings can improve the understanding of which dimension of complexity significantly influence project cost, and the need to focus efforts on strategically addressing that complexities.

Construction projects are usually operating in a complex and dynamic environment in which the accumulation of many interrelated factors causes high uncertainty. Construction projects are complex and frequently involve substantial uncertainties including process complicatedness, intricate organization structure, dynamic environment, and financial strain. The study aims to categorize the influencing factors into three groups, namely construction project system, economic-market climate, and external environment. It attempts to adopt a novel analysis tool to examine the relationship between the project cost and multiple influencing factors by using Bayesian SEM. While the Bayesian SEM method has been receiving increasing attention in exploring the relationship between latent variables, construction studies still heavily rely on the covariance-based SEM approach. This study introduces several advantages of Bayesian SEM that make it more flexible and powerful than covariance-based SEM and provides the foundation of Bayesian SEM estimation and inference by illustrating this method in a project cost application.

Construction projects are usually operating in a complex and dynamic environment in which the accumulation of many interrelated factors causes high uncertainty. Construction projects are complex and frequently involve substantial uncertainties including process complicatedness, intricate organization structure, dynamic environment, and financial strain. The study aims to categorize the influencing factors into three groups, namely construction project system, economic-market climate, and external environment. It attempts to adopt a novel analysis tool to examine the relationship between the project cost and multiple influencing factors by using Bayesian SEM. While the Bayesian SEM method has been receiving increasing attention in exploring the relationship between latent variables, construction studies still heavily rely on the covariance-based SEM approach. This study introduces several advantages of Bayesian SEM that make it more flexible and powerful than covariance-based SEM and provides the foundation of Bayesian SEM estimation and inference by illustrating this method in a project cost application.

The beginning of industrialization human being has observed a variety of environmental troubles in the world. This industrialization has not only brought growth and affluence but ultimately troubled the ecosystem. One of the crashes is visible, in form of water contamination. Here the current study heavy metal contamination of water body has been discussed. Effluents from a great number of industries viz., tannery, textile, pigment & dyes, paint, wood processing, petroleum refining, electroplating, leather etc., have a major amount of heavy metals in their wastewater. The conventional technique of handling heavy metal pollution includes chemical oxidation, chemical precipitation, ion exchange, reverse osmosis, membrane separation, electrodialysis etc. These processes are expensive, energy intensive and frequently related with generation of poisonous by-product. Therefore, the adsorption has been examined as a cost-efficient technique of elimination of heavy metals from wastewater. In the current study different low-cost adsorbent has been a review as an abatement of heavy metal contamination from wastewater. These adsorbent comprise materials of natural origin like peat moss, zeolites, clay, and chitin are found to be an effective agent for removal of deadly heavy metals like Pb, Cd, Zn, Cu, Ni, Hg, Cr etc. Separately from these, a variety of agricultural wastes like rice husk, waste tea, neem bark, black gram; Turkish coffee, walnut shell etc. were also known as a powerful adsorbent for heavy metal removal. at the side of that low-cost industrial byproduct like fly ash, lignin, iron (III) hydroxide and red mud, coffee husks, Areca waste, tea factory waste, sugar beet pulp, battery industry waste, blast furnace sludge, waste slurry, sea nodule remains and grape stalk wastes have been discovered for their technical possibility to eliminate toxic heavy metals from impure water.

Increasing distributed generation and intermittency, along with the increasing frequency of extreme weather events, impose a serious challenge for the electric power supply security. Understanding the costs of interruption is vital in terms of enhancing the power system infrastructure and planning the distribution grid. On the other hand, customer rights and demand response techniques are further reasons to study the worth of power reliability. In this paper, the authors make use of directional distance function and shadow pricing method for a case study from Finland. The aim is to calculate the cost of one minute of power interruption from the distribution network operator perspective. The sample consists of 78 distribution network operators from Finland with cost and network information between 2013 and 2015.

Widespread poverty is the most serious threat and social problem that Bangladesh faces. Regional vulnerability to climate change threatens to escalate the magnitude of this poverty. It is essential that projections of poverty be made while bearing in mind the effects of climate change. The main purpose of this paper is to investigate the agrarian sub-national regional analysis of climate change vulnerability in Bangladesh under various climate change scenarios and its potential impact on poverty. This study is relevant to socio-economic research on climate change vulnerability and agriculture risk management and has the potential to contribute new insights to the complex interactions in household income and climate change risks to agricultural communities in Bangladesh and South Asia. The current study uses analysis of variance, cluster analysis, decomposition of variance and log-normal distribution to estimate the parameters of income variability that ascertain vulnerability levels and help us to understand the poverty levels that climate change could potentially incur. It is found that the income share in income sources revealed that income category shares across the various regions of Bangladesh are far from uniform. The variance decomposition of income showed that agricultural income in Mymensingh and Rangpur is the main cause of income difference. Moreover, large variance of agricultural income in the regions is induced by gross income from rice production. Additionally, constant reduction of rice yield due to climate change in Bangladesh is not such a severe problem for farmers, however, the extreme events like flood, flash flood, drought, sea level rise, and greenhouse gas emission based on RCPs could increase the poverty rates in Mymensingh, Rajshahi, Barisal, and Khulna regions that would be highly affected by unexpected yield loss due to extreme climatic events. Therefore, research and development of adaptation measures to climate change for regions where farmers are largely dependent on agricultural income is important.

This research proposes a framework to assist wind energy developers to select the optimum deployment site of a wind farm by considering the Round 3 zones in the UK. The framework includes optimisation techniques, decision-making methods and experts’ input in order to help stakeholders with investment decisions. Techno-economic, Life Cycle Costs (LCC) and physical aspects for each location are considered along with experts’ opinions to provide deeper insight into the decision making process. A process on the criteria selections is also presented and seven conflicting criteria are being considered in TOPSIS methods in order to suggest the optimum location that was produced by the NSGAII algorithm. Seagreen Alpha was the most probable solution, followed by Moray Firth Eastern Development Area 1, which demonstrates by example the effectiveness of the newly introduced framework that is also transferable and generic. The outcomes are expected to help stakeholders and decision makers to make more informed and cost-effective decisions under uncertainty when investing in offshore wind energy in the UK.

Rifampicin is one of the most important chemotherapeutic agents used in the treatment of tuberculosis. M. tuberculosis clinical strains resistant to rifampicin harbor mainly mutation in an 81-base pair region of rpoB. These mutations mainly consist of single amino acid substitutions. However insertions also can be related with rifampicin resistance strains. Herein, we described an insertion of 12 nucleotides in clinical isolates of M. tuberculosis resistant to rifampicin, all obtained from inmates. To evaluate the importance this insertion in surviving and drug resistance, it were carried out fitness experimental assays as well as in silico studies of 3D structural models, molecular docking simulations and virtual screening. The medical records of the seven patients showed all were previously treated to tuberculosis. Growth curves shown that the insertion determines a biological cost when compared to wild type rpoB and katG; or the double mutated rpoB S531L and katG S315T. From docking and molecular dynamics simulations it can be inferred that the insertion does not affect the process of synthesis of RNA transcripts. On the other hand, in the mutant RNAP-RIF complex rifampicin confirmed a low affinity interaction for the mutant form. Interesting, virtual screening for potential inhibitors for wtRNAP and mRNAP using a library of 1446 compounds approved by the FDA showed that the best ligands were mainly compounds with antibiotic activity, although the targets involved in the pharmacological action are other than RNAP. In conclusion, seven strains of M. tuberculosis RIF resistant that present an insertion of four amino acids in RNA polymerase showed by growth curve assays, a biological cost. Further, bioinformatics tools had characterized the putative drug resistance dynamic as well as the maintenance of RNA polymerase activity.

The pollution of the bays in Abidjan is a major concern for the Ivorian policy makers. In fact, the pollution of the bays induce high costs to the society while impacting population health dramatically. As a result, pollution reduction management of production activities has been undertaken in the Cocody Bay area. To our knowledge, no study has yet proposed a model to evaluate the cost-effectiveness of these pollution management strategies. A cost-effectiveness model, based on Monte Carlo simulation, was developed to assess the economic and environmental impacts of various scenarios characterized by a set of production practices, both in the short term and in the long term. The authors discuss the steps and input parameters of the model presented. The proposed model may serve as the basis for identifying an optimal production scenario defined as the scenario with the best incremental cost-effectiveness ratio considering a willingness to pay (WTP) threshold. The WTP, to be estimated based on the gross domestic product of Côte d’Ivoire, represents the opportunity costs associated with selecting the optimal scenario. The current framework can also be applied to other settings facing similar challenge.

As argued by ‘Declaration of Concrete Environment (2010)’ of Korea and ‘Declaration of Asian Concrete Environment (2011)’ of six Asian countries, concrete as a single material has lately shown extremely large impact on environmental issues such as climate change. Assessment of environmental impact from concrete material and production has considerable importance. Concrete is a major material used in the construction industry that emits a large amount of substances with environmental impacts during its life cycle. Accordingly, technologies for the reduction in and assessment of the environmental impact of concrete from the perspective of Life Cycle Assessment must be developed. At present, the studies in relation to greenhouse gas emission from concrete are being carried out globally as a countermeasure against climate change. In this study, a sustainable concrete mix design algorithm was designed using correlation analyses, and its carbon emission and cost reduction performances were assessed. Using correlation analyses, the concrete strength, w/b and s/a ratios, and CO₂ emissions were identified as major variables of concrete mix design that influenced other variables. Also, this study aims to evaluate the CO₂ emission reduction performance of the algorithm-deduced sustainable concrete mix design, and therefore, the CO₂ emissions of the sustainable concrete mix design are compared with those of the actual concrete mix design applied to the construction of the office building A in South Korea.

Cement industry is one of the highest energy consuming industries. The quantity of fuel and energy needed accounts for most of the cost of cement manufacturing. Thermal power plants generate electricity but are harmful and ineffective by nature. As a backup mechanism to account for main grid failures, batteries can be utilized. In this paper the first ever investigation on battery’s depth of discharge (DOD) for four different kinds of battery technologies is carried out in the framework of cement industry. The intended battery technologies are the lead-acid battery (LA), lithium-ion battery (Li-ion), vana-dium redox battery (VR), and nickel–iron battery (Ni-Fe). Four hybrid energy generation models (HEGMs) for five cement plants of Pakistan using the HOMER pro software are proposed. Cement plants includes Askari Cement Plant, Wah (ACPW); Bestway Cement Plant, Kalar Kahar (BCPKK); Bestway Cement Plant, Farooqia (BCPF); Bestway Cement Plant, Hattar (BCPH); and DG Cement Plant, Chakwal (DGCPC). HEGM-1 comprises of a diesel generator (DGen), a photovoltaic system (PV), a converter, and a battery system. HEGM-2 comprises of a PV system, a converter, and a battery system. HEGM-3 is the grid-connected version of HEGM-1 and HEGM-4 is the grid-connected version of HEGM-2. A base-model consisting of grid only is used as a reference. A multi-criteria decision analysis (MCDA) is performed by formulating a cumulative objective function (COF) which includes net present cost (NPC), levelized cost of energy (LCOE), and greenhouse gas (GHG) emissions. The principal objective is the maximization of COF while simultaneously minimizing the objectives (NPC, LCOE and GHG emissions), based on optimal battery technology and DOD. The results reveal that VR is the most suitable battery technology with 10% DOD. It is achieved for DGCPC with HEGM-3 with 61.49% of NPC, 78.62% of LCOE and 84.00% of GHG emissions reduction as com-pared to the base model.

Time overrun and tight deadlines set by the client are the critical challenges faced by the construction industry for decades. The fast-track technique was introduced to overcome these challenges. Since its introduction in 1970s, a number of construction projects have been completed on fast-track however the stakeholders still lack confidence in its implementation, mainly due to the lack of awareness of the impact that variances in cost and quality have on project duration on fast-track schedule and the lack of decision support available in this domain. This research aims at analysing the impact of cost and quality variances on project duration thereby proposing a decision support model that facilitates the decision-making process. Data was gathered from 159 construction industry professionals on a 5-point Likert scale based questionnaire. Structural equation modelling (SEM) software was used to analyse the data. 4 hypotheses were developed including the mediation analysis. The results of the analysis showed that both cost and quality variances have significant impact on variances in project duration. Moreover, the quality variance also significantly impacts the variations in project budget. The mediation analysis showed that cost variance mediates a statistically significant impact between variations in project quality and project duration. The R2 values of the proposed model indicated that 78.4% of the changes in project duration are attributed to changes in project cost and quality whereas 72.9% variations in project cost are attributed to changes in project quality. The IPMA results showed that the decisions resulting in variations in project cost have the greatest potential to enhance project performance in terms of project duration among which adopting scope freeze approach at early design stage, over-designing the facility and early procurement of long-lead-time items are the most influential decisions whereas over-extending the resources on quality related decisions may result in adverse effects on project duration which include early involvement of O&M team in design phase, early involvement of the contractor in design phase, 90% acceptable quality compromise and quality management plan submission in pre-design stage. Q2, RMSE, MAE and CVPAT values confirm that the proposed model has high out-of-sample predictability.

The objective of this research is to show the family farms as an energy consumers and producers from renewable sources. It is a possibility for them to reduce operating costs. Time scope of the study covers the period 2014-2022. The data source is the Farm Accountancy Data Network. On the basis of the value of energy output and energy costs the rankings were prepared. After the ranks were awarded, the strong position of the Netherlands and Germany was indicated. It has been shown that the production and consumption of energy depend on the economic size of the farm, and do not depend on the type of production. As such, panel models were built for energy output and costs. The determinants that affect them were indicated. Energy output depends on total inputs – the higher they are, the higher the output. The energy costs are related to utilized agricultural area, total output and family farm income. The results obtained are discussed within the framework of recommendations of the European Commission.

The use of low cost sensors has dramatically increased in recent years in all the engineering sectors. In the field of buildings and automotive, low cost sensors open very interesting perspectives, because they allow to monitor temperature and humidity distributions together with air quality, in a widespread and punctual way and allow control of all energy parameters. The main issue still open remains the validation of the measurements. In this work, we propose an innovative approach to verify the measurements given by some low-cost systems built ad hoc for automotive applications. Two independent low-cost measurement systems have been set to measure Particulate air Matter (PM) concentration, TVOC concentration, CO2 concentration, formaldehyde concentration, air temperature, relative humidity, pressure, air flow velocity and GPS position. These systems have been calibrated by the comparison with standard and certified sensors used by the regional authority of Emilia-Romagna region (ARPAE, Italy) for characterising the air-quality. The innovation of this approach lies in both the in-field comparison of low-cost and high quality sensors and the use of proper conversion approaches for mass concentration measurements. A quantitative analysis of the sensors performance is given, with a focus on effects of time-granularity, relative humidity, mass conversion from particle counts and size detection response. The results show that the low-cost sensors measurements of air temperature, relative humidity and particle number concentration are in a good agreement with high quality sensors measurements, with a strong impact of relative humidity on performance indicators. Overall, a good quality and consistency of the data among the sensors has been achieved.

African scientific research faces formidable challenges, particularly with limited access to state-of-the-art measurement instruments. The high cost associated with these devices presents a significant barrier for regional research laboratories, impeding their ability to conduct sophisticated experiments and gather precise data. This predicament not only hampers the individual laboratories but also has broader implications for the African scientific community and the advancement of knowledge in developing nations—the financial cost barrier considerably impacts the research quality of these laboratories. Reflection on technical and economical solutions needs to be quickly found to help these countries advance their research. In civil Engineering, the thermal conductivity property is the most important measurement for characterising heat transfer in construction materials. Existing devices (i.e., conductometers) in a laboratory are expensive (approximately 30,000 euros) and unavailable for some African laboratories. The study proposes a new and affordable device to evaluate thermal conductivity in construction materials. The method involves establishing a thermal flux between a heat source ( from the Joule effect provided by steel wool where a current is circulating) and a cold source (generated by ice cube) under steady-state conditions. The development of the cylindrical prototype is based on the comparative flux-meter method outlined in the measuring protocol of the ASTM E1225 standard document. Experiments were conducted on four distinct materials (polystyrene, wood, agglomerated wood, and rigid foam). The results indicate a correct correlation between the experimental values obtained from the newly developed prototype and the reference values found in the literature. For example, concerning the experimental polystyrene study, the detailed case analysis reveals a good correlation, with a deviation of only 4%. The percent error found falls within the acceptable range indicated by the standards recommendations of the ASTM E1225 standard, i.e., within 5% acceptable error.

This study was to identify clinical cancer biomarkers for recurrent gastric cancer survivors using artificial intel-ligence. From a hospital-based cancer registry database in Taiwan, the datasets of the incidence of recurrence and clinical risk features were included in 2476 gastric cancer survivors. We benchmarked Random forest with MLP, C4.5, AdaBoost, and Bagging algorithms on metrics and leveraged synthetic minority oversampling technique (SMOTE) for imbalanced dataset issues, cost-sensitive learning for risk assessment, and SHapley Additive ex-Planations (SHAP) for feature importance analysis in this study. Our proposed Random forest outperformed the other models with an accuracy of 87.9%, a recall rate of 90.5%, an accuracy rate of 86% and F1 of 88.2% on re-current category by a 10-fold cross-validation in a balanced dataset. We identified clinical features of recurrent gastric cancer, which are the top five features, stage, number of regional lymph node involvement, Helicobacter pylori, BMI(body mass index), and gender, which significantly affect the prediction model's output, are worth paying attention to in the following causal effect analysis. Using an artificial intelligence model, the risk factors for recurrent gastric cancer could be identified and cost-effectively ranked according to their feature importance. In addition, they should be crucial clinical features to provide physicians with the knowledge to screen high-risk patients in gastric cancer survivors as well.

Recent literature has seen a rapid expansion in the reference to front-end forensics as an indication of the untapped value of forensic science. While some of these contributions have centered on development of forensic intelligence from a single area of investigation, others call for a more fundamental change in the relationship between crime laboratories and policing, particularly relating early laboratory analysis with big datasets to provide leads to investigators. We highlight several recently implemented tactical strategies of crime laboratories that contribute to the body of forensic intelligence. Beyond the scientific gains from these tactical applications, the corresponding details on associated efficiencies, costs, time savings, and quality improvements offer insights towards patterns of success for the community of crime laboratories. Further details expand an interpretation of what constitutes success with an eye on the contributions of the crime laboratory towards public health, safety, and protection of the innocent in addition to societal gains from conviction of the guilty. The economic interpretation of the value provided by the forensic laboratory assists in the cost-benefit review of strategic and tactical decisions and supports the justification for laboratory public funding with measures of the return on investment from public support of the forensic laboratory

The study of velocimetry is important for characterizing and comprehending the effects of fluid flow, and the Particle Image Velocimetry (PIV) technique is one of the primary approaches for understanding the velocity vector field in a test section. Commercial PIV systems are expensive, with one of the main cost factors being high-speed camera equipment capable of capturing images at high frames per second (fps), rendering them impractical for many applications. This study proposes an evaluation of utilizing smartphones as image acquisition systems for PIV technique application. An experimental setup inspired by the known angular displacement of synthetic particles is proposed. A stepper motor rotates a plate containing an image of synthetic particles on its surface. The motion of the plate is captured by the smartphone camera, and the images are processed using PIVlab-MatLab® software. The use of two smartphones is assessed, with acquisition rates of either 240 fps or 960 fps and varying angular velocities. The results were satisfactory for velocities up to 0.7 m/s at an acquisition rate of 240 fps and up to 1.8 m/s at 960 fps, validating the use of smartphones as a cost-effective alternative for the PIV technique.

This work presents a new model to obtain the minimum cost design for a rectangular isolated footing, taking into account that the column is located in any part of the footing. The methodology is developed by integration to obtain the moments, bending shear and punching shear according to the American Concrete Institute ACI 318-14. This document presents the simplified and precise equations of the four moments, four bending shears and one punching shear acting on the footing. Some designs have been developed by the trial and error method to determine the footing dimensions, and later the thickness and steel area of the footing are obtained. Some authors present the minimum cost design for a rectangular isolated footing taking into account that the column is located in the center of gravity of the footing, and other authors present very complex algorithm. Numerical examples are presented to obtain the minimum cost design of rectangular isolated footings under biaxial bending, and some results are compared with those of other authors considering the same conditions. The new model presents a smaller contact area with the soil and a lower design cost than those presented by other authors.

We study the robustness of the cμ-rule for the optimal allocation of a resource consisting of one unreliable server to parallel queues with two different classes of customers. The customers in queues can be served with respect to a FCFS retrial discipline, when the customers at the head of queues repeatedly tries to occupy the server in a random time. It is proved that for the scheduling problem in the system without arrivals the cμ-rule minimizes the total average cost. For the system with arrivals it is difficult directly to prove the optimality of the same policy with explicit relations. We derived for an infinite-buffer model a static control policy that also prescribes for the certain values of system parameters the service exclusively for the class-i customers if both of queues are not empty with the aim to minimize the average cost per unit of time. It is also shown that in a finite-buffer case the cμ-rule fails.

Most of the literature on the optimization problem of transportation in supply chain networks (SCN) considered fixed costs (FC). However, in the practical applications of this problem it is important to study the effect of FC. This paper examines the impact of fixed cost increase as well as the variable cost on the optimization of a Two-Stage SCN. To do so, two mathematical models for mixed-integer nonlinear programming are developed. The first model optimizes fixed and variable costs in addition to the opening cost, whereas the second model only optimizes variable and opening costs. To evaluate the effect of considering FC on the optimization supply chain problem, four groups of instances are randomly generated, and solved using Lingo. The results of the two models are compared utilizing the average percentage deviation. In addition, sensitivity analysis is performed to determine the impact of changes in opening and variable costs on the considered optimization problem. The computational results and the sensitivity analysis show that the first model with minimized FC outperforms the second model, which does not consider the FC in minimization and FC affect the optimization.

Among all Brazilian economic sectors, the livestock sector stands out due to its large production and high export volume. However, beef production is associated to significant environmental impacts, such as deforestation and greenhouse gas (GHG) emission. The Paris Agreement was settled to avoid that global mean temperature rise up to 1.5 – 2º C by 2100. In 2020, Brazil committed in its nationally determined contribution (NDC) to reduce its GHG emission by 43% until 2030. This study aims to identify the association of beef production and beef cattle emissions, as well as assess predictive GHG emission scenarios for 2030 and value these emissions. To translate the environmental impacts of beef production into economic impacts, and thus amplify the discussion, we valued GHG emissions using the social cost of carbon (SCC). The results showed that the business as usual (BAU) GHG emission derived from beef production would range between 0.423 and 0.634 GtCO₂e in 2030, whereas the maximum emission estimated to meet the NDC should be 0.257 GtCO₂e. The SCC revealed the opportunity to reduce between US $18.8 and $42.6 billion in the cost of BAU emissions from beef production in 2030 if the NDC is met. Lastly, assessing a scenario where climate targets and beef exports are prioritized, between 2-10 kg of beef per capita would be available in the domestic market in 2030. Our results reveal the need and urgency of changes in livestock production to emit less GHG per kg of beef produced, and the avoided monetary cost of reducing emissions.

Industrial effluents contain contaminants that pose threats to the environment and human health. Bioremediation is an environmentally friendly, sustainable, and cost-effective approach to degrade or transform pollutants using microbial enzymes. Laccase is a versatile enzyme that oxidizes a wide range of substrates, such as dyes, phenolic compounds, pesticides, and polycyclic aromatic hydrocarbons (PAHs), with the consumption of molecular oxygen. Laccase can also remove heavy metals by forming complexes with organic ligands or reducing them to fewer toxic forms. However, the application of laccase in bioremediation is limited by its low production, stability, and specificity. Recombinant technology has been employed to enhance the expression, activity, and stability of laccase in various bacterial hosts. Immobilization techniques have been developed to improve the reusability and stability of laccase in different environmental conditions. This review summarizes the recent developments in the production optimization of recombinant laccase enzymes and their role in the bioremediation of industrial effluents. It also discusses the challenges of laccase-based biocatalytic systems for environmental cleanup.

Medical tests' cost-effectiveness analysis reveals a strong correlation between their accuracy and analysis results. Theoretically, we provide two lower bounds that medical tests' accuracy must exceed to be considered cost-effective. Theoretically, we provide two lower bounds that the accuracy of medical tests meeting cost-effectiveness must exceed. First, medical tests' accuracy should surpass the lower bound of matching requirements for each patient to receive the most appropriate intervention based on their test results. Second, the overall lower limit should be exceeded for the medical testing to be cost-effective for the patients as a whole. Furthermore, the conclusions from this model also provide an economic explanation for the under-diagnosis of rare diseases and the challenges faced in implementing precision medicine for minority patients. A numerical simulation example validates the conclusions of this paper.

As traditional supply chains face increasingly severe environmental issues and countries promote green development and sustainable development policy concepts, cultivating green supply chain operation models is gradually being highly valued by current governments and enterprises. Generally speaking, the production of green products incurs higher additional costs and thus their total production costs also increase. In this work, the product green level is related to the random demand. Under the green supply chain buy-back contract with the green product R&D cost sharing between the manufacturer and the retailer, both the product green level and the order quantity need to be decided to maximize the channel profit. In order to coordinate the green supply chain, the manufacturer needs to share both the risk of good salvage and the green product R&D cost with the retailer. We find that both the wholesale price and buy-back price increase in the manufacturer’s proposition of the green product R&D cost, but decrease in emission reduction efficiency coefficient or carbon trading price. In addition, the product green level, the optimal order quantity and the channel profit increase in emission reduction efficiency coefficient, but decrease in the R&D cost coefficient of the product green level. Interestingly, we find that if the carbon trading price is low, the manufacturer will set a low product green level and the product carbon emission trading is a cost for the supply chain. The increment of the carbon trading price leads to a higher cost such that the channel profit is decreased. However, if the carbon trading price is high, the manufacturer will set a high product green level and the product carbon emission trading is a revenue for the supply chain. The increment of the carbon trading price leads to a higher revenue such that the channel profit is increased.

3D printing is commonly used to create complex objects at a low cost. It has also been applied in the fabrication of metamaterials and metasurfaces, which alter the propagation path of electromagnetic waves. These structures have diverse applications, including enhancing beam direction, improving antenna gain and signal-to-noise ratio, and creating filters and reflectors. Metasurfaces are cheap to fabricate and their use is expected to boost antenna efficiency in 5G telecommunications and beyond. However, accurately characterizing their profile remains a significant challenge. This paper presents a low-cost fully automated 4-axis instrument for microwave metasurface charac-terization, overcoming limitations of manual methods and offering an efficient and accurate approach. This research represents a significant advancement in microwave metasurface characterization, enabling sophisticated techniques to advance wireless communication technolo-gies, as it is the case of the future 5G and millimeter-wave communication systems. The equipment has an approximate cost of $1550 USD and was able to characterize a metalens with a focal distance of 20 cm designed for signals at 30 GHz. It was possible to create 2D and 3D profiles of the intensity distribution focused by the metalens and extract parameters such as the gain (8.05 dB), 3dB depth of focus (11 cm) and full width at half maximum (2.17 cm). The comparison of the measurements with the diffraction calculations of the metalens showed a very good agreement between the in-tensity distributions and the parameters of the metalens.

Background Out-of-pocket costs are key expenses that many individuals incur in order to receive health services. They have been identified as a key access barrier for vulnerable populations, in particular for populations affected by neglected diseases with a chronic progression, such as Chagas disease. It is important to understand the costs of accessing healthcare services that are borne by patients with T. cruzi infection. Methodology We prepared a structured survey for patients with T. cruzi infection/Chagas disease who were all treated by the healthcare system in endemic municipalities in Colombia. The results were analyzed according to three categories: 1. the socioeconomic profiling of the patients; 2. the costs of and time spent on transportation; and 3. the opportunity costs (money that was not earned) related to treatment at the local primary care hospital or at the high-complexity reference hospital. Main findings Ninety-one patients answered the survey voluntarily. The data revealed that, when treated at the specialized reference hospital, patients spent 5.5 times more on food and accommodation, transportation costs were five times higher, and the loss of earnings was three times higher than when they were treated at the local primary care hospital. Moreover, the amount of time spent on transportation was 4 times higher at the reference hospital. Conclusions Providing comprehensive healthcare services for Chagas management at local primary healthcare hospitals would allow the most vulnerable patients to save on expenses related to medical and non-medical costs (out-of-pocket costs), in turn leading to higher adhesion to treatment thus benefiting the health system as a whole. These findings are in alignment with the WHO’s World Health Assembly 2010 Resolution on the importance of treating Chagas at local primary care hospitals, thereby saving patients time and money, allowing for timely care, and promoting access to healthcare.

BACKGROUND: The National Lung Screening Trial (ILST) and the NELSON study showed that lung cancer-specific mortality can be reduced by 20-24% using low-dose computed tomography (LDCT) screening in high-risk populations, due to an increase in early-stage diagnoses. RESEARCH QUESTION: How much lung cancer-related direct costs may be reduced using a LDCT screening programme based on the ILST protocol in a public healthcare system?STUDY DESIGN AND METHODS: Cost analysis of lung cancer screening (LCS) vs. usual care in the framework of the retail price of the Catalan public healthcare system. The LCS group included costs of screening (ILST protocol), treatment cost according to weighted average distribution of TNM staging in the NLST and NELSON trials, lung cancer detection rate (CDR) and smoking cessation intervention. The usual care group included treatment costs based on distribution of TNM staging registered in the Spanish index hospital. RESULTS: In the usual care group, treatment costs were €91,959. In the 5-year duration of the LCS programme, the average expected costs per subject were €1,342 (range €1,054-1,832 depending on malignancy in detected nodules) for screening and €32,431 for treatment, with an expected reduction of €952 based on an average CDR of 1.6%. The decrease in cost resulting from stage shift offsets 70.6% of the costs of the screening programme. INTERPRETATION: Baseline 5-year LCS costs are low according to the ILST protocol. In the Catalan public healthcare system, the expense reduction from the stage shift due to the LCS programme compensates a substantial part of its costs.

As China put forward its “carbon emissions peak and carbon neutrality” goals, how to achieve carbon reduction had become a key for China’s goal. The manufacturing industry is an important source of carbon dioxide emissions. For a manufacturing country like China, adjustments in various aspects of the industry would have a huge impact on carbon emissions. As an important reform of contemporary production mode, the process of production automation in China will inevitably affect China's carbon emissions. Therefore, the analysis of the impact of production automation on carbon dioxide emissions was an important basis for judging the future carbon reduction in China. Refer to the traditional study of carbon Kuznets curve, this paper analyzed the impact of average wage on production automation and the role of production automation in the carbon Kuznets curve(CKC). This paper proposed that production automation plays a mediating role in the process of carbon emissions, and gives a verification model of the mediating role. By analyzing the relationship between average wage and production automation process, the U-shaped curve relationship between them was verified. By examining the relationship between carbon dioxide emission data and production automation industry in China, we verified that production automation plays a partial mediating role in the change of carbon Kuznets curve. Combined with the analysis of the two parts, this paper believed that with the continuous development of China's intelligent manufacturing industry, China's carbon reduction prospects were more optimistic, and there was a good industrial foundation to achieve the “carbon peaking and carbon neutrality” goals. Finally, this paper proposes policy suggestions as increase research investment in production automation, help promote the application of production automation, encourage the research and application development of low-carbon technology, especially encourage modular design, so as to give full play to the role of production automation in the process of carbon neutrality in China.

Primary and secondary cardiovascular prevention is less effective than expected due to the concern about polymedication by professionals and the lack of patient adherence to medications prescribed in the medium and long term. Polypills have been presented as a possible solution. A comprehensive bibliographic review is presented about polypills as mechanisms for facilitating adherence and a proposed guide for the use of polypills for the prevention of cardiovascular risk. 41 articles were included, showing options for the polypill as a method of primary and secondary cardiovascular prevention.The polypill increases therapeutic adherence in the medium and long term, also increasing the therapeutic results compared to the administration of the various drugs separately. Based on the evidence, a flow diagram is proposed for the prescription of a polypill.Polypills increase the effectiveness and adherence of patients to primary and secondary cardiovascular prevention programs, without increasing the cost of the intervention. The use of a polypill in cardiovascular prevention can be effective as a prescription tool.

River valley bottoms have hydrological, geomorphological, and ecological importance and are buffers for protecting the river from upland nutrient loading coming from agriculture and other sources. They are relatively flat, low-lying areas of the terrain that are adjacent to the river and bound by increasing slopes at the transition to the uplands. These areas have under natural conditions, a groundwater table close to the soil surface. The objective of this paper is to present a stepwise GIS approach for the delineation of river valley bottom within drainage basins and use it to perform a national delineation. We developed a tool that applies a concept called cost distance accumulation with spatial data inputs consisting a river network and slope derived from a digital elevation model. We then used wetlands adjacent to rivers as a guide finding the river valley bottom boundary from the cost distance accumulation. We present results from our tool for the whole country of Denmark carrying out a validation within three selected areas. The results reveal that the tool visually performs well and delineates both confined and unconfined river valleys within the same drainage basin. We use the most common forms of wetlands (meadow and marsh) in Denmark's river valleys known as Groundwater Dependent Ecosystems (GDE) to validate our river valley bottom delineated areas. Our delineation picks about half to two-thirds of these GDE. However, we expected this since farmers have reclaimed Denmark's low-lying areas during the last 200 years before the first map of GDE was created. Our tool can be used as a management tool, since it can delineate an area that has been the focus of management actions to protect waterways from upland nutrient pollution.

The residential sector in the United States is in need of comprehensive policy-making reforms that concurrently address housing affordability and environmental sustainability. This study investigates the feasibility of state-wide zero-energy affordable housing by analyzing historical data on climate, energy use, and solar system costs in the Commonwealth of Virginia. The hypothesis examined is that the net present cost of implementation of rooftop residential solar systems to achieve zero-energy Low-Income Housing Tax Credit (LIHTC) buildings is lower than the discounted present cost of energy of otherwise identical conventional buildings that run without renewable energy generation systems. The authors propose a generalizable framework for analyzing the feasibility of achieving region- or state-wide zero-energy LIHTC developments. To validate the framework, the authors employ a longitudinal sample of monthly energy use data from 2013-2016 obtained from 310 residential units of 15 LIHTC developments across the state. Based on statistical regression analysis, energy simulation, and simulation-based risk analysis, the authors find that the net present value of zero-energy LIHTC investments can be positive with a low risk. The investment value varies often depending on the zero-energy building definition, weather characteristics, retail price of electricity, and incentive rate. This study can help housing policymakers and industry professionals analyze and benchmark the feasibility of innovative zero-energy housing policies and projects.

Microsystems are key enabling technologies, with applications found in almost every industrial field, including in-vitro diagnostic, energy harvesting, automotive, telecommunication, drug screening, etc. Microsystems, such as microsensors and actuators, are typically made up of components below 1000 microns in size that can be manufactured at low-unit cost through mass-production. Yet, the development of microsystems for commercial or educational purposes, has typically been limited to upper income countries due to the initial investment costs associated with the microfabrication equipment and processes. However, recent technological advances have enabled the development of low-cost microfabrication tools. In this paper, we describe a range of low-cost approaches and equipment (below £1000), developed or adapted and implemented in our laboratories. We describe processes including photolithography, micromilling, 3D printing, xurography and screen-printing used for the microfabrication of structural and functional materials. The processes that can be used to shape a range of materials with sub-millimetre feature sizes are demonstrated here in the context of Lab-on-Chips, but they can be adapted for other applications. We anticipate that this paper, which will enable researchers to build a low-cost microfabrication toolbox in a wide range of settings, will spark a new interest in microsystems.

Face milling is a well known commercial process highly used in heavy industries that consumes high amount of power. Besides power issue, modern manufacturing industries are aiming for per part cost reduction keeping the product quality unimpaired. Unexpectedly if the part is rejected in any stage of manufacturing, the cost of manufacturing dramatically increases. Major cause of part rejection is excessive tool wear that imparts poor surface profile or catastrophic tool failure that causes adherence of broken tool debris onto machined surface. Furthermore, the tool wear is associated with sliding distance (frictional distance) and the tool life quantifies the cost of tools. As such, from the perspective of manufacturing industries it is imperative to optimize the surface quality parameter, cost of part, power consumption, and material removal – this is exactly what is accomplished here. By this work, it is possible to conserve power consumption, produce parts with lower cost, manufacture with uncompromising surface quality and enhanced material removal rate. Moreover, as intermediate factors of interest, the influences of sliding distance, tool life and tool flank wear on the overall machining performance are evaluated. The multi-objective optimization by Grey Relational Analysis (GRA) revealed that for improved product performance and fast manufacturing (case 1) optimum results are: feed per tooth fz = 0.25 mm/tooth, cutting speed vc = 392.6 m/min and cutting length l = 0.5 mm; for resource conservation (case 2) the optimum results are: feed per tooth fz = 0.125 mm/tooth, cutting speed vc = 392.6 m/min, cutting length l = 0.5 mm.

Information regarding the cost of a construction project is available to the investor and project participants in order to determine the subsequent success of a project, given that the information they collect has an impact on the decisions they make. Cost calculations, especially in the initial phase of a project, often generate large errors. This paper presents the new approach based on a combination of the Case Based Reasoning method (CBR) with the originally selected criteria for the description of a construction project (as a result of Pearson correlation coefficient and Spearman's rank correlation coefficient) and Building Information Modeling (BIM) technology. The CBR method fulfils expectations for a simple and fast system supporting the cost estimation process. It does not require any specialist knowledge, so it will be comprehensible to cost estimation practitioners. The BIM-based model gives the opportunity for the calculation of quantity take-offs and enables the use of the information contained in the BIM model in the cost estimation process. In order to prepare the model an appropriate relational database had to be developed. With extensive research, a database of 173 construction projects, including the construction of a sports field, was obtained. There were 14 variables defined originally by authors; however, only 10 (as a result of the correlation analysis) were used for the calculation. Data related to the project were collected in the BIM model. Results estimating the project’s unit price, using the CBR method, were presented and discussed. The Mean Absolute Estimate Error was used to evaluate the model.

In this study, the probabilistic exergoeconomic analysis was performed for four industrial gas turbine (GT) units comprising of two (GT16 and GT19) units of 100MW GE engine and two (GT8 and GT12) units of 25MW Hitachi engine at Transcorp Power Limited, Ughelli. These four industrial GT engine units were modelled and simulated using natural gas as fuel. The design point (DP) simulation results of the modelled GT engines were validated with the available DP thermodynamic data from original equipment manufacturer (OEM). This was done before the off-design point (ODP) simulation was carried out which represents the plant operations. The results obtained from exergy analysis at full load operation show that the turbine has the highest exergy efficiency followed by compressor and combustion having the least. For turbines these were 96.13% for GT8 unit, 98.02% for GT12 unit, 96.26% for GT16 unit, and 96.30% for GT19 unit. Moreover, the combustion chamber has the highest exergy destruction efficiency of 55.16% GT8 unit, 56.58% GT12 unit, 43.90% GT16 unit, and 43.30% GT19 unit respectively. The exergy analysis results obtained from the four units show that the combustion chamber (CC) is the most significant exergy destruction with lowest exergy efficiency and highest exergy destruction efficiency of plant components. The exergoeconomic analysis results from four units showed combustion chamber energy destruction cost of 531.08 $/h GT8 unit, 584.53 $/h GT12 unit, 2351.81$/h GT16, and 2315.93$/h GT19 unit. The probabilistic results analysis based on the input parameters distributions evaluated and discussed.

Child malnutrition is a critical public health concern that significantly hampers children's physical and mental development and has serious economic repercussions. The World Health Organization (WHO) attributes half of all deaths among children under five to malnutrition, with long-term consequences such as lower educational achievement, decreased productivity, and deepened poverty. The economic impact of child malnutrition extends beyond public health, imposing substantial costs on health systems, households, and the broader economy. This study estimated the burden of child malnutrition in Colombia among children up to four years old using a Markov chain model from a societal perspective. The model simulated six health states, integrating direct and indirect costs, with epidemiological data and international literature guiding the transition probabilities. Surveys were conducted with caregivers to assess indirect costs. Results indicated that malnutrition accounted for 419.84 Disability-Adjusted Life Years (DALYs) per 1,000 inhabitants. The total cost of malnutrition over four years was approximately USD 243.58 million, with an annual average cost of USD 60.89 million, with 65% of the burden falling on households. The findings emphasize the significant economic and health burden of child malnutrition, underscoring the importance of early and comprehensive interventions. Investing in child nutrition can improve health outcomes, reduce economic strain, and enhance productivity, making it a crucial priority in health and economic development agendas.

The study investigates methods to enhance the reliability of NO2 monitoring using low-cost electrochemical sensors to measure gaseous pollutants in air by addressing the impacts of temperature and relative humidity. The temperature within a plastic container was controlled using an internal mica heater, an external hot air blower or cooling packs, while relative humidity was adjusted using glycerin solutions. Findings indicated that the Auxiliary Electrode (AE) signal is susceptible to temperature and moderately affected by relative humidity. In contrast, the Working Electrode (WE) signal is less affected by temperature and relative humidity; however, adjustments are still required to determine gas concentrations accurately. Tests involving on/off cycles showed that the AE signal experiences exponential decay before stabilizing, requiring the exclusion of initial readings during monitoring activities. Additionally, calibration experiments in zero air allowed the determination of the compensation factor nT across different temperatures and humidity levels. These results highlight the importance of compensating for temperature and humidity effects to improve the accuracy and reliability of NO2 measurements using low-cost electrochemical sensors. This refinement makes the calibration applicable across a broader range of environmental conditions. However, the experiments also show a lack of repeatability of the zero calibration.

Waveform generation as part of an on-chip built-in self-test (BIST) circuitry often necessitates sufficient linearity without expensive hardware overhead. Achieving high linearity is critical for accurate signal generation, especially in applications requiring high precision, such as biomedical and instrumentation. Currently, achieving the high linearity and precision required in signal generators often relies on costly hardware such as automated test equipment (ATE). This paper presents a DAC based hardware synthesizable arbitrary waveform generator. We use a low-cost DAC and a fully digital on-chip testing and calibration approach to nullify the effect of the DAC’s non-linearity on the generated waveform. The ultra-low cost and high linearity benefit of the proposed waveform generator makes it highly suitable for integration into resource-constrained systems. The proposed approach is validated using simulation results of the small-area DAC designed in TSMC 0.18um technology and the testing and calibration algorithms implemented in MATLAB. The DAC, designed with a matching accuracy at only the 5-bit level, is able to generate a signal with an ENOB of 12 bits alongside a SFDR and THD surpassing 100 dB. This high level of signal purity is consistently maintained across 100 Monte-Carlo simulations, demonstrating the robustness of the architecture against PVT variations as well as random mismatches.

In the context of high energy costs and energy transition, the optimal use of energy resources for industrial consumption is fundamental. This paper presents a decision-making structure for large consumers having flexibility to manage electricity or natural gas consume to satisfy the demands of industrial processes. The proposed modelling energy system structure relates monthly medium and hourly short-term decisions to which these agents are subjected, represented by two connected optimization models. In the medium term, the decision occurs under uncertain conditions of energy and natural-gas market prices, as well as hydropower generation (self-production). The monthly decision is represented by a risk-constrained optimization model. In the short term, hourly optimization considers the operational flexibility of energy and/or natural-gas consumption, subject to the strategy defined in the medium term and mathematically connected by a regret cost function. The model application of a real case of a Brazilian aluminum producer indicates a measured energy cost reduction of U$ 3.98 million over a six-month analysis period.

Harvesting is the collection of mature crops from the field. A harvesting procedure involves cutting, installation, collecting, transferring, and then stacking the cut produce. Mechanization of harvesting operations is critical to lowering harvesting costs, crop production costs, crop loss, turnaround time, weather risk, and increasing benefit through proper technology. To achieve the desired purpose, a manually operated reaper machine is created and developed to assist farmers by lowering the cost of crop cutting and collection in the field while achieving the best efficiency possible within the limits. Research technique is a set of acts or procedures that must be completed in order to do research properly, as well as the intended sequence of these steps. Identify the problem statement. Studying the current design of the reaper machine Review the literature. Product development general design process steps for reaper harvester’s machine include planning, concept development, system-level design, detail design, testing and refining, and product ramp-up. In this step, the material properties are defined based on design. To simulate the reaper machine using Catia software, Prototyping, testing for validation, Interpret and report. Material is chosen based on the strength requirements of the different parts of the Reaper machine. The machine is built with locally accessible materials. This self-propelled reaper moves at a forward speed of 2.54 m/s. The cutting bar measures 120 cm in length and the bundling mechanism is dropped. The field capacity is 0.306 ha/hour, respectively. The needed manpower for harvesting one hectare of wheat and rice reaper harvesting field operation is two man-hours per ha. The amount of fuel required to completely fill the tank after harvesting the plot was measured to determine the amount of fuel consumed for reaping the test plot, which was 1.17 l/h.

Under the new pattern of "Double-Cycle" economy, how to restructure the domestic economic structure to cope with the continuous softening of the global economic structure is an urgent issue. This paper empirically examines the impact of digitalization level on the division of labor in National Value Chain (NVC) within cities using panel data from 263 cities between 2001 and 2016, employing a spatial Durbin model.The study demonstrates that the digitization level can enhance division of labor in NVC in neighboring regions through spatial spillovers. An increase in digitization not only positively deepens the construction of NVC but also contributes to the development of NVC in adjacent areas.The digitization level can deepen the division of labor in NVC through the impact of cost reduction, consumption upgrading, and market integration. This effect exhibits regional variations, with consumption upgrading playing a crucial role in expanding the division of labor in NVC in the eastern region through improving digitization levels, while cost reduction is a key factor in the central region. The research results of this paper provide some empirical evidence for further progress and transition of China's NVC developing mode from the perspective of digital level.

Detecting and evaluating pain in people with cognitive impairment, especially dementia, is a challenge. Their ability to accurately report pain and comprehend related questions decreases the reliability of their self-report. This has contributed to the fact that pain is underdiagnosed and undertreated in this population, which can lead to involuntary ageism. The design and assessment of this training capsule under the context of the European COST-Action TD1005 responds to the need for education and training in "Pain Assessment In Cognitive Impairment, especially dementia" and the development of the internationally agreed observational PAIC15 scale. The 3-hour capsule, intended for healthcare workers and caregivers, consists of theoretical-practical levels: 1) basic concepts and challenges in pain in aging, cognitive impairment/dementia, 2) available scales and PAIC15, 3) video presentation of clinical cases illustrating a 3×2 matrix of situations (rest, transfer and experimental pain) and stages of disease (mild and moderate). The objectives focused on training the ability to observe, detect, and assess the signs of pain using PAIC15 and its feasibility. The pre-post analysis in a Master educational setting showed agreement with the results obtained in the Spanish national survey on 1) scarce knowledge of observational tools and their use, and 2) uncertainty in the identification of signs of pain and feasibility in moderate/severe scenarios. The capsule improved the ability to identify and evaluate the pain items, especially facial expressions, and their confidence on observational tools. Debriefings highlighted the relevance of observational scales in dementia and the gain obtained using the new observational instrument.

Supplier collaboration and partnership in procurement are essential elements for enhancing organizational efficiency, innovation, and resilience in today's globalized markets. This qualitative study investigates the dynamics of effective supplier relationships, focusing on trust, communication, innovation, quality, cost savings, and resilience as critical factors. Data were gathered through semi-structured interviews, case studies, and document analysis across diverse industries, highlighting insights from procurement professionals and supplier representatives. Key findings underscore the foundational role of trust and communication in fostering successful collaborations. Establishing transparent, ongoing communication channels facilitates mutual understanding, reduces conflicts, and enhances overall satisfaction. Collaborative innovation emerged as pivotal, enabling organizations to pool resources and expertise for product development and process improvement. Quality and reliability were identified as significant outcomes of close partnerships, particularly in industries with stringent standards such as aerospace and healthcare. Furthermore, the study reveals substantial cost savings and efficiency gains through collaborative efforts in process optimization and waste reduction. Effective risk management practices within these partnerships enhance supply chain resilience, enabling organizations to anticipate and mitigate disruptions proactively. Despite these benefits, challenges such as cultural differences, technological integration, and regulatory compliance require strategic mitigation strategies. In conclusion, organizations can optimize supplier collaborations by prioritizing trust-building, fostering a culture of innovation, and investing in robust relationship management practices. This approach not only enhances operational performance but also positions organizations to navigate market uncertainties and achieve sustainable growth in a competitive landscape.

Abstract: Effectiveness of a Single Fixed Dose 3 mg Rasburicase for Prevention and Management of Hyperuricemia of Tumor Lysis Syndrome in adult Cancer Patients Background: Tumor lysis syndrome (TLS) is a potentially life-threatening complication associated with certain types of cancer. Rasburicase is an essential medicine required to prevent and treat the hyperuricemia associated with TLS. Due to a shortage of rasburicase during the COVID-19 pandemic, a fixed dose strategy of 3 mg rasburicase had been used in many adult cancer patients in our center. Objective: The objective of this study was to assess the effectiveness of a 3 mg fixed dose of rasburicase in preventing and managing hyperuricemia associated with TLS in adult cancer patients. Methods: We conducted a retrospective, observational cohort study between March 2020 and November 2022. The study included adult patients who received a fixed dose of 3 mg rasburicase. The primary outcome measure was the reduction in serum UA levels of

Anxiety disorders affect patient quality of life (QoL). This study aimed to examine the associations between improved QoL and reduced clinical symptoms and Korean medicine (KM) in patients with anxiety disorders. Medical records of patients with anxiety who were treated with KM (acupuncture, Anxiety disorders affect patient quality of life (QoL). This study aimed to examine the associations between improved QoL and reduced clinical symptoms and Korean medicine (KM) in patients with anxiety disorders. Medical records of patients with anxiety who were treated with KM (ac-upuncture, psychotherapy, Chuna therapy, aromatherapy, or herbal medicine) for at least 4 weeks were retrospectively analyzed. Clinical, QoL, and cost outcomes were measured at baseline and at 4 and 12 weeks (Anxiety: State-Trait Anxiety Inventory[STAI X-1(state), X-2(trait)], Beck Anxiety Inventory[BAI]; anger: State-Trait Anger Expression Inventory State[STAXI-S(state), T(trait)], Anger Expression Inventory[AXI-K-I(anger-in), AXI-K-O(anger-out), AXI-K-C(anger-control); depression: Beck Depression Inventory-II[BDI II], QoL: QoL-related instruments Euro Quality of Life 5 Dimensions utility score[EQ-5D], Euro QoL Visual Analog Scale[EQ-VAS]). The quali-ty-adjusted life years (QALYs) and average cost-effectiveness ratio of KM for anxiety were esti-mated. The medical records for 67 patients were evaluated. KM treatments were found to be as-sociated with decreased anxiety (STAI X-1; STAI X-2; BAI, p

Varicella (chickenpox) is one of the most common infectious diseases in preschool children and can be prevented by immunization. While immunization program promotes higher vaccine coverage, there are still challenges with implementing vaccination programs particularly in low-income countries. Economic barriers can increase inequality in vaccination, which highlights the importance of distributing cost-effective varicella vaccines. Varicella vaccines have been developed with two main Varicella-Zoster Virus (VZV) strains globally: MAV/06 and Oka strains. Most of the vaccines are based on the Oka strain, while MAV/06 strain vaccines were exclusively developed by GC Biopharma. Although more than 30 million doses of MAV/06 vaccines as cost-effective vaccines have been distributed internationally, there is no comprehensive review on safety, immunogenicity, and effectiveness of MAV/06 vaccines in the literature. This paper aims to summarize and present more than 30 years of accumulated evidence from research on safety, immunogenicity, and effectiveness of MAV/06 vaccines. We expect that MAV/06 vaccines as cost-effective varicella vaccines make a significant contribution to improving global public health and health equality in children.

Evolutionary Machine Learning (EML) has demonstrated its effectiveness in modeling various real-world application domains, including the dynamics of diseases and the creation of predictive models across diverse fields. However, the challenge of data imbalance adversely impacts the performance of EML models. While strategies involving misclassification costs or cost-sensitive learning exist to address this issue, their integration into EML has yet to be thoroughly explored. This paper aims to fill this gap by investigating the application of cost-sensitive EML for intelligent health risk prediction. More specifically, this paper delves into the utilization of cost-sensitive genetic programming (CSGP) and cost-sensitive genetic algorithms (CSGA), which are among the most widely used algorithms in the EML category. The study entails training CSGP and CSGA to predict the early onset of three chronic conditions (hypertension, diabetes, and fatty acid-related disorders) through the development of an EML model. Subsequently, the model's performance is evaluated through standard fitness functions such as sensitivity, specificity, and F1-score. From the experimental results, EML models demonstrate promising results in identifying the occurrence of chronic diseases. Further optimization of the cost-sensitive EML model holds the potential for enhanced outcomes in modeling medical problems.

Addressing the contemporary challenges of mitigating and adapting to climate change, conserving biodiversity, and ensuring human well-being constitutes a central focus for humanity. These challenges, though often treated in isolation, are intricately interconnected, sharing common drivers. Current and future research emphasizes the pursuit of an integrated approach that minimizes trade-offs and fosters synergies among the Sustainable Development Goals (SDGs). The nexus between ecosystem service value (ESV) and the social cost of carbon (SCC) is pivotal in informing national and governmental decisions regarding human well-being and climate change mitigation and adaptation, respectively. This study employs the Zhoushan Archipelago as a case study, exploring ESV and SCC dynamics from 2010 to 2020. An in-depth analysis of spatial development characteristics and the temporal and spatial correlation between ESV and SCC is conducted. The findings reveal an increase in Zhoushan Archipelago's land area from 2010 to 2015, stabilizing thereafter, with construction land exhibiting the most notable proportional growth. Carbon emissions were observed during the study period, with forests identified as the primary carbon sink, followed by mudflat and waterbody, while construction land contributed significantly to carbon emissions. Notably, the SCC in Zhoushan Archipelago increased by 2452%, contrasting with a modest 1.5% decrease in ESV during the study period. Global spatial correlation analysis demonstrated a significant positive correlation between ESV and SCC in Zhoushan Archipelago throughout the study period, validated by passing the P-value test. However, local spatial correlation analysis revealed a specific nature of the global spatial correlation between ESV and SCC in the island area. This nuanced understanding enhances our comprehension of the intricacies surrounding ESV and SCC dynamics, contributing valuable insights to the broader discourse on sustainable regional development, economic decarbonization, and human well-being improvement.

Aims: The objective of this study was to assess the cost-effectiveness of the CardioMEMS HF system in a HF Clinic in Spain by evaluating the real-time remote monitoring of pulmonary artery pressures, which has shown to reduce heart failure (HF) related hospitalizations and improve the quality of life for selected HF patients. Particularly, the study aimed to determine the value of CardioMEMS in Southern Europe, where healthcare costs are significantly lower and its effectiveness remains uncertain. Methods: This single-centre study enrolled all consecutive HF patients who had been implanted with a pulmonary artery pressure sensor (CardioMEMS-HF system, Abbott Laboratories, Abbott Park, IL, USA). The number of HF hospitalizations in the year before and the year after the sensor implantation was compared and quality-adjusted life years (QALY) gained based on a literature review of previous studies was calculated. Results: The rate of HF hospitalisations was significantly lower at 1 year compared with the year before CardioMEMS implantation (0.25 versus 1.10 events/patient-years, HR 0.22, p=0.001). At the end of first year, the usual management outperformed the CardioMEMS HF system, resulting in a net monetary value difference of 2,540€ per patient and a benefit-cost ratio of 0.38. However, by the end of the second year, the CardioMEMS system is estimated to reduce costs compared to usual management. Conclusions: Based on the results, we suggest that remote monitoring of pulmonary artery pressure with the CardioMEMS HF system represents a long-term cost-effective strategy in a healthcare setting in Southern Europe.

This research aims to develop an inexpensive ocean observation instrument with a project name is NOBEL (Nusantara Oceanography Backdoor Experiment Laboratory)-BOX. The device can be installed on all types of vessels and placed in a specific area to map the water conditions, providing accurate data for managing a marine area specifically to water quality. The principle of NOBEL-BOX is to attach sensors in a container connected to a microcontroller and then measure directly. The method employed includes experimental design, laboratory and field tests, and data evaluation to produce the necessary system and instruments. The design process involves the construction of the instrument and the fabrication of the device. This process includes creating three-dimensional sketches/drawings, designing microcontrollers and data transmission systems, and power capacity. The sensors attached to this device are surface water temperature, air temperature, salinity, dissolved oxygen, pH, and TDS. The testing phase includes data validation, testing of the device in the laboratory, and field testing. The laboratory and field tests showed that the device worked and provided data that can be used to analyze the seawater condition spatially and over time.

This paper introduces an advanced method that integrates contingent valuation and machine learning (CVML) to estimate residents’ demand for reducing or mitigating environmental pollutions and climate change. To be precise, CVML is an innovative hybrid machine-learning model, and it can leverage a limited amount of survey data for prediction and data enrichment purposes. The model comprises of two interconnected modules: Module I, an unsupervised learning algorithm, and Module II, a supervised learning algorithm. Module I is responsible for grouping the data into groups based on common characteristics, thereby grouping the corresponding dependent variable, whereas Module II is in charge of demonstrating the ability to predict and the capacity to appropriately assign new samples to their respective category based on input attributes. Take a survey on the topic of air pollution in Hanoi in 2019 as an example, we found that CVML can predict households’ willingness– to– pay for polluted air mitigation at a high degree of accuracy (i.e., 98%). We found that CVML can help users reduce costs or save resources because it makes use of secondary data that is available on many open data sources. These findings suggest that CVML is a sound and practical method that could be widely applied in a wide range of fields, particularly environmental economics and sustainability science. In practice, CVML could be used to support decision-makers in improving the financial resources to maintain and/or further support many environmental programs in years to come.

Developing a low-cost wireless energy meter with power quality measurement for smart grid applications represents a significant advancement in efficient and accurate electrical energy monitoring.In increasingly complex and interconnected electrical systems, this device is essential in various applications, such as smart grids, enabling real-time energy usage monitoring. In such a context, smart meters expand the possibilities for sustainable and efficient energy use and promote better utilization of energy sources, especially non-renewable ones. According to the 2020 International Energy Agency (IEA) research, non-renewable energy sources represent 65% of the global total. The smart meter developed in this work is built based on the ESP32 microcontroller and easily accessible components, using a user-friendly development platform that offers a cost-effective solution while ensuring reliable performance. The main objective of the smart meter development was to enhance the software and simplify the hardware. Unlike traditional meters that perform electrical parameter calculations using complex hardware circuits, this project performed the calculations directly on the microcontroller. This approach reduced the complexity of the hardware, simplifying the meter’s design. With the high-performance processing capability of the microcontroller, efficient and accurate calculations of electrical parameters were achieved without the need for additional circuits. This software-driven approach with simplified hardware brought benefits such as reduced production costs, lower energy consumption, and increased meter development and updates flexibility. Furthermore, the integrated wireless connectivity in the microcontroller enables the transmission of collected data to remote monitoring systems for later analysis. The developed smart meter offers cost, energy efficiency, and flexibility benefits. It represents an innovative, efficient, and versatile solution for smart grid applications.

Hillslope and mountain roads are often the source of erosion, which in turn can lead to larger landslides and other types of mass-movements. For this reason, low-cost repeat surveys that can be done by practitioners and not solely scientists and engineers is essential. To solve this issue the present contribution shows the testing and applicability of a mix of SfM-MVS and low-cost SLAM technology to provide erosion information. The low-cost SLAM generated between 300 ~ 900 points per square meter, while SfM-MVS created between ~11,000 to 900,000 points. The density is however a trade-off against a spatially varying error, although the variability at the road-cut scale only ranges from 2 cm vertically to 2.5 cm in x,y,z based on the C2C algorithm. Furthermore, this error tends to be more important in the higher section of the cutout (further away from the sensor and at a flatter angle). It is thus possible to measure small-scale roadside change, providing that the change is in the range of >5 cm (adding the maximum potential error twice) and providing that the road-cut is such that the sensors can be brought close to the surface (camera or sensor on a pole). The authors suggest that it can be a solution for state and agencies with limited funding and that cannot afford regular laser or for roadside that are difficult to access.

Skid resistance of a road pavement surface is the force developed when tyre is prevented from rotating slides along the pavement sur-face. This property comes from the combination of the macro- and micro-texture of pavement. The skid resistance of an asphalt pave-ment is an important parameter influencing driving safety on a road, since there is a proven relationship between skid resistance and accident parameters. The paper deals with the measurement principle of pavement skid resistance (surface friction) including longitudinal and transverse friction. A high number of measuring devices of skid resist-ance are also introduced highlighting their advantages and limitations. Besides, the measurement policies in the European Union and in Hun-gary are outlined. Pavement surface texture is investigated dealing with the levels of surface tex-ture, the most common measuring tech-niques, the macro-texture features of asphalt types, as well as the Hungarian regulation in the field. As a related topic, the aggregate properties and their implication in the relevant Hungarian specification are introduced briefly, as well. Some outcomes of the EU’s COST Ac-tion 354 on the development of unified European macro-roughness and skid resistance performance indicators and indices are also presented.

The study sought to investigate the effect of Multi-choice Goal programming in project Portfolio Analysis, using Lagos State Project Portfolio from between 2017-2021 as a study case. Specifically, the objectives examined the effectiveness of multi-choice goal programming in analyzing the project Portfolio of Lagos State Government and investigated the possible lapses in the use of Multi-choice Goal programming in analyzing the project Portfolio of Lagos State Government. Data were gathered from the State financial Statements and analyzed using Lingo-17 Software. Based on the analysis, the study discovered that the goals formulated can be optimally and minimally attained as the positive deviational and negative deviational variables depict zero. This indicates that the cost incurred on the project portfolio was absolutely minimized during the period and at the same time; Lagos State Government derived the most preferred benefits from it. The study therefore concluded that the State minimized the project costs and at the same time maximized benefits while meeting its overall objectives.

The cost to train a basic qualified U.S. Navy fighter aircraft pilot is nearly $10M. The training includes primary, intermediate, and advanced stages, with the advanced stage involving extensive flight training and being very expensive as a result. Despite the screening tests in place and early-stage attrition taking place, 4.5% of aviators undergo attrition in this most expensive stage. Key reasons for aviator attrition include poor flight scores, voluntary withdrawals, and medical causes. Reduction in late-stage attrition offers several financial and operational benefits to the U.S. Navy. To that end, this research leverages feature extraction and machine-learning techniques on the very sparse flight test grades of student aviators to identify those with a high risk of attrition early in training. Using about 10 years of historical U.S. Navy pilot training data, trained models accurately predicted 50% of attrition with a 4% false positive rate. Such models could help the U.S. Navy save nearly $20M a year in attrition costs. In addition, machine-learning models were trained that can recommend a suitable training aircraft type for each student aviator. These capabilities could help better answer the need for pilots and reduce the time and cost to train them.

This study quantified effluents generated during processing in three industry types, estimated the energy potential from the quantified effluents in form of biogas generation, and determined the economic viability of the biogas recovered. Data were procured from relevant scientific publications to quantify the effluents generated from the production processes in the industry types examined using industrial process calculations. The effluent data generated was used on the 2-module biogas energy recovery model to estimate the bioenergy recovery potential within it. Economic and financial analysis was based on cash flow comparison of all costs and benefits resulting from its activities. The effluents generated average daily biogas of 2559 Nm³/gVS, having a daily potential combined heat and power of 0.52 GWh and 0.11 GWh respectively. The Life Cycle Analysis and cost-benefit analysis show the quantity of avoided emissions from using the effluents to generate heat and power for processes, and also the profitability of the approach. Conclusively, the study shows the use of biomass effluents to generate biogas for CHP is a viable one based on the technologies of a reciprocating engine, gas turbine, microturbine, and fuel cell. However, it is recommended that the theoretical estimation be validated using a field-scale project.

Intending to analyze the role of nuclear power in an integrated energy system, we used the IESA-Opt-N cost minimization model focusing on four key themes: system-wide impacts of nuclear power, uncertain technological costs, flexible generation, and cross-border electricity trade. We demonstrate that the Levelized Cost of Energy (LCOE) alone should not be used to demonstrate the economic feasibility of a power generation technology. For instance, under the default techno-economic assumptions, particularly the 5% discount rate and exogenous electricity trade potentials, it is cost-optimal for the Netherlands to invest in 9.6 GWe nuclear capacity by 2050. However, its LCOE is 34 €/MWh higher than offshore wind. Moreover, we found that nuclear power investments can reduce demand for variable renewable energy sources in the short term and higher energy independence (i.e., lower imports of natural gas, biomass, and electricity) in the long term. Furthermore, investing in nuclear power can reduce the mitigation costs of the Dutch energy system by 1.6% and 6.2% in 2040 and 2050, and 25% lower national CO₂ prices by 2050. However, this cost reduction is not significant given the odds of higher nuclear financing costs and longer construction times. In addition, this study has shown that lower financing costs (e.g., EU taxonomy support) considerably reduce the relevance of nuclear cost uncertainties on its investments. Furthermore, we demonstrate that the economic feasibility of national nuclear power investments can vary considerably depending on the cross-border electricity trade assumptions. Additionally, we found that lowering the cost of small modular reactors has more impact on their economic feasibility than increasing their generation flexibility. In conclusion, under the specific assumptions of this study, nuclear power can play a complementary role (in parallel to the wind and solar power) in supporting the Dutch energy transition from the sole techno-economic point of view.

Classification predictive modeling involves the accurate assignment of observations in a dataset to target classes or categories. There is an increasing growth of real-world classification problems with severely imbalanced class distributions. In this case, minority classes have much fewer observations to learn from than those from majority classes. Despite this sparsity, a minority class is often considered the more interesting class yet developing a scientific learning algorithm suitable for the observations presents countless challenges. In this article, we suggest a novel multi-class classification algorithm specialized to handle severely imbalanced classes based on the method we refer to as SAMME.C2. It blends the flexible mechanics of the boosting techniques from SAMME algorithm, a multi-class classifier, and Ada.C2 algorithm, a cost-sensitive binary classifier designed to address highly class imbalances. Not only do we provide the resulting algorithm but we also establish scientific and statistical formulation of our proposed SAMME.C2 algorithm. Through numerical experiments examining various degrees of classifier difficulty, we demonstrate consistent superior performance of our proposed model.

(1) Background: in epidemiological terms, it has been possible to calculate the savings in health resources and the reduction in health effects of COVID vaccines. From the point of view of economic evaluation, some studies have estimated its cost-effectiveness with the vaccination showing highly favorable results, which in some cases is cost-saving; (2) Methods: a cost-benefit analysis of the vaccination campaign in the North Metropolitan Health Region (Catalonia). An epidemiological model based on observational data and before and after comparison is used. The information on the doses used and the resources assigned (conventional hospital beds, ICU, number of tests) has been extracted from administrative data from the largest Primary Care provider in the region (Catalan Institute of Health). A distinction is made between the social perspective and the health system; (3) Results: the costs of vaccination are estimated at 137 million euros (€48.05/dose administered). This figure is significantly lower than the positive impacts of the vaccination campaign, which are estimated at 470 million euros (€164/dose administered). Of these, 18% corresponds to the reduction of ICU discharges, 16% to the reduction in conventional hospital discharges, 5% to the reduction in PCR tests and 1% to the reduction of RAT tests. Monetization of deaths and cases with sequelae avoided account for 53% and 5% of total savings, respectively. The benefit/cost ratio is estimated at 3.4 from a social perspective and 1.41 from a health system perspective. The social benefits of vaccination are estimated at €116.67 per dose of vaccine given (€19.93 from the point of view of the health system); (4) Conclusions: the mass vaccination campaign against COVID is cost-saving. From a social perspective, most of these savings come from the monetization of the reduction in mortality and cases with sequelae, although the intervention is equally widely cost-effective from the point of view of the health system thanks to the reduction in the use of resources. It is concluded that, from an economic perspective, the vaccination campaign has high social returns.

This paper presents a detailed description of three methodologies to electrify the rural households of small loads with reliable and economical method using solar energy as input source of power. It is observed that high DC voltage is better and economical solution rather than AC based solar systems and low voltage DC systems. In this paper, three methodologies were analysed to select the right combination of portable converters with low prices, which may further enhance the energy access and affordability to common people. The proposed three methodologies were tested through action research in collaboration with a team of scientists and technical experts of National Institute of Solar Energy. The comparative analysis is carried out on three different converters, various kind of house loads and types of power supply i.e. AC/DC. The performance, quality and economic evaluation has been carried out with the help of MATLAB SIMULINK and other measuring instruments specific for solar photovoltaic systems. The derived results were analysed and inferences made for use in village household loads and their income groups. Further, a three-step analytical framework on village-level power energy efficient power at affordable power preposition was presented. This study will help in the designing as well as in the performance and economic evaluation of converters based on solar photovoltaic systems of different technologies.

In this letter, we show an alternative low-cost fabrication method to obtain poly(dimethyl siloxane) (PDMS) microfluidic devices. The proposed method allows the inscription of micron resolution channels on polystyrene (PS) surfaces, used as a mold for the wanted microchip’s production, by applying a high absorption coating film on the PS surface to ablate it with a focused low-power visible laser. The method allows obtaining micro resolution channels at powers between 2 and 10mW and can realize any two-dimensional polymeric devices. The effect of the main processing parameters on the channel’s geometry is presented.

Real estate industry is related to the national economy and people's livelihood，characterized by a high degree of financial intensity. The enterprises in this industry need certain financial ability and large shareholder controlling ability to support their survival. However，due to the multiple adverse impacts of current state policies，banks and private capital，the credit crunch，the sudden decrease in withdrawn funds and the limitation of internal financing，the problem of capital restraint of real estate enterprises has become more and more serious. From the perspective of corporate governance，this paper studies the interaction among financial constraints，ownership concentration and corporate performance under different shareholding states by analyzing the quantitative characteristics of equity structure，and looks for the appropriate range of the largest shareholder holding ratio，which has considered the financial performance and risk. It is found that raising the ownership concentration can effectively ease the financing constraints and improve the performance of enterprises，both of which are significant under the state of high ownership concentration， while the financial constraints play a significant intermediary effect under the State of absolute holding， while in the decentralized state of ownership，there is a significant regulatory effect，and the interaction of the three will be different due to the size of the enterprise.

Background: There are major air pollution monitoring gaps in sub-Saharan Africa. Developing capacity in the region to conduct air monitoring in the region can help estimate exposure to air pollution for epidemiology research. The purpose of our study is to develop a land use regression (LUR) model using low-cost air quality sensors developed by a research group in Uganda (AirQo). Methods: Using these low-cost sensors, we collected continuous measurements of fine particulate matter (PM2.5) between May 1, 2019 and February 29, 2020 at 22 monitoring sites across urban municipalities of Uganda. We compared average monthly PM2.5 concentrations from the AirQo sensors with measurements from a BAM-1020 reference monitor operated at the US Embassy in Kampala. Monthly PM2.5 concentrations were used for LUR modeling. We used eight Machine Learning (ML) algorithms and ensemble modeling; using 10-fold cross validation and root mean squared error (RMSE) to evaluate model performance. Results: Monthly PM2.5 concentration was 60.2 µg/m³ (IQR: 45.4-73.0 µg/m³; median= 57.5 µg/m³). For the ML LUR models, RMSE values ranged between 5.43 µg/m³ - 15.43 µg/m³ and explained between 28% and 92% of monthly PM2.5 variability. Generalized additive models explained the largest amount of PM2.5 variability (R²=0.92) and produced the lowest RMSE (5.43 µg/m³) in the held-out test set. The most important predictors of monthly PM2.5 concentrations included monthly precipitation, major roadway density, population density, latitude, greenness, and percentage of households using solid fuels. Conclusion: To our knowledge, ours is the first study to model the spatial distribution of urban air pollution in sub-Saharan Africa using air monitors developed from the region itself. Non-parametric ML for LUR modeling performed with high accuracy for prediction of monthly PM2.5 levels. Our analysis suggests that locally produced low-cost air quality sensors can help build capacity to conduct air pollution epidemiology research in the region.

Economic burden due to premature mortality has a negative impact not only in health system even though in the society. The aim of this study was to estimate the potential years of work tenure lost (PYWL) due to Chagas disease in Colombia from 2010-2017. National data on mortality by sex and ages between 15 and 62 dues to Chagas from 2010 to 2017. The PYWL methodology was applied to assess the impact of Chagas disease in workers who suffer from them. In total, 1,261 deaths were analyzed in the study, of which 60% corresponded to males. The loss of labor productivity caused by Chagas disease was estimated at $29 million. Overall, 48,621 PYWL were lost, and there was an average of 21 years for all subjects with Chagas. Throughout the analyzed period, PYWL increased substantially, and it is necessary to continue with early detection programs to avoid premature death in working age population.

In power systems, flow allocation (FA) methods allow to allocate usage and costs of the transmission grid to each single market participant. Based on predefined assumptions, the power flow is split into isolated generator specific or producer specific sub-flows. Two prominent FA methods, Marginal Participation (MP) and Equivalent Bilateral Exchanges (EBE), build upon the linearized power flow and thus on the Power Transfer Distribution Factors (PTDF). Despite their intuitive and computationally efficient concept, they are restricted to networks with \emph{passive} transmission elements only. As soon as a significant number of \emph{controllable} transmission elements, such as High-voltage direct current (HVDC) lines, operate in the system, they loose their applicability. This work reformulates the two methods in terms of Virtual Injection Patters (VIP) which allows to efficiently introduce a shift parameter $q$, tuning contributions of net sources and net sinks in the network. Major properties and differences of the methods are pointed out. Finally, it is shown how the MA and EBE algorithm can be applied to generic meshed AC-DC electricity grids: Introducing a \emph{pseudo-impedance} which reflects the operational state of controllable elements, allows to extend the PTDF matrix under the assumption of knowing the current system's flow. Basic properties from graph theory are used for solving the pseudo-impedance dependent on the position in the network. This directly enables \emph{e.g.} HVDC lines to be considered in the MP and EBE algorithm. The extended methods are applied to a low-carbon European network model (PyPSA-EUR) with a spatial resolution of N=181 and an 18\% transmission expansion. The allocations of VIP and MP, show that countries with high wind potentials profit most from the transmission grid expansion. Based on the average usage of transmission system expansion a method of distributing operational and capital expenditures is proposed. Further it is shown, how injections from renewable resources strongly drive country-to-country allocations and thus cross-border electricity flows.

Buildings use 30-40 % of all energy resources and are thus their main consumers in modern society. Moreover, buildings require a vast amount of different raw materials. During the last two decades, several green building certifications have been created in order to consider social, economic and environmental aspects of sustainability of buildings. One of the most famous and widely used of these certifications is Leadership in Energy and Environmental Design (LEED). So far, the use of LEED has concentrated in the US and other developed countries. One reason that restricts the use of this point-based system certification in developing countries is the limited data about its costs. In this study, the extra cost of the certification process will be evaluated besides the changes needed in the design of the building to reach the points required by LEED. At the first stage, the number of points the case study earns in its current format (Scenario 1) were found out, then the cost difference of getting either the Certified (Scenario 2) or Silver (Scenario 3) level LEED certification for the building was studied. It was found that besides some technical considerations, filling the criteria of the Certified and Silver level increases the total costs of construction by 3.4% and 5.9%. Further improvement of the building’s energy efficiency would enable the attainment of a higher-level certification. The results of the study could help to promote the use of green building certifications in Western Asia.

Almost all single-family detached house in Canada consume huge electricity for space heating and domestic hot water (DHW) purposes. There are many possibilities to design an energy-efficient house. A solar water heating system can be used for domestic water and space heating. Water temperature can be kept constant always by connecting a heat pump or oil burner because solar energy is intermittent. Proper and optimized solar photovoltaic and collector design, tank design, heat pump selection, house insulation, total demand calculation in each section are essential. Energy-Efficient house design has been proposed with water heating and space heating system and compared with the existing system, solar PV based systems, and solar collector based system. The tracking and non-tracking based solar thermal collector based and the solar photovoltaic based system has been compared in this paper and investigate the suitable one for practically applicable and acceptable by the people. Simulation has been done by using the PolySun software. It found that by implementing the proposed PV based system with tracking is highly suitable considering lower cost, high output power, flexibility, easy installation.

In the industrial sector, the financial gain is generally considered at the cost of environmental degradation. The environmental protection and economic benefit are common conflicting objectives in many optimization problems. In any multi-criteria problem, the most challenging part is to optimize the conflicting goals. But if these objectives become non-conflicting, then the problem can be solved with ease. This paper is all about minimizing the environmental impact of industrial processes while maximizing the net economic benefit. There is a general misconception of linking the environmental protection with a financial loss. This is not always true; the Eco-Efficiency or Cleaner Production Technology (CPT) is a perfect example to disprove this notion. Economics of CPT regarding water savings for the textile-processing sector in Pakistan has been analyzed in this paper. Changes in water use before and after the implementation of water conserving technologies in the textile sector of Pakistan from a study conducted by the Cleaner Production Institute (CPI) are utilized to perform a cost-benefit analysis. Direct financial benefits that could be achieved through the application of these technologies are presented only. Other environmental benefits, though not described here, are of no less importance. The study results reveal that very high potential of water savings exists for most of the investments on CPT.

The objective of the prototype is to eliminate the polluting contamination of water sources, due to the leak of industrial waste without any kind of treatment, mainly generated by the industries and home sector. In this project, a prototype of water purification by plasma technology has been designed. The prototype will convert contaminated water into the plasma stream and eliminate the pathogens from the water by exposing it to ultraviolet radiation and plasma sterilisation. The polluted water will be accelerated at high speed using a water pump in order to convert it into a liquid-gas mixture for ease plasma generation. This process will be achieved when the electric supply from a source of alternating current (AC) is applied to the water by means of high voltage electrodes. After which, the mixture slows down to return into liquid form and the clean water is obtained. The whole process takes place without significantly raising the temperature also knows as non-thermal plasma. The device also has an automatic flow and pressure control system. Finally, a short feasibility study has been conducted on the water samples collected and report obtained from Chennai Metropolitan Water Supply and Sewage boards are reported. It has been concluded that this new plasma-based water treatment system will be more efficient and cheaper than the current wastewater treatment techniques and can be used in the future as the replacement of current secondary and tertiary treatments of industrial wastewater.

This study evaluates eight-year ownership costs for battery electric vehicles (BEV) versus non-plugin hybrid vehicles using forecasting to estimate future electricity and conventional gasoline prices and incorporating these in a multiple design of experiments simulation. Results suggest that while electric vehicles are statistically dominant in terms of variable costs over an 8-year life-span, high-performance hybrid non-plugins achieve variable fuel costs nearly as good as low-performing electric vehicles (those attaining only 3 miles per kilowatt hour) and that these hybrid acquisition costs are (on average) lower yet the vehicles retain higher residual values. In general, the six smallest ownership costs are split evenly between hybrid and electric vehicles; however, inflation for conventional regular gasoline is estimated to outstrip inflation per kilowatt hour. Thus, non-plugin hybrid cars are likely to require considerably more advanced engineering to keep pace.

In response to ever-increasing concerns regarding ecological degradation and societal impact, numerous stakeholders such as non-governmental organisations, government officials, end-users, the mass media, and community activists have compelled business organizations, particularly multi-national companies to lessen harmful greenhouse gases emissions associated with their production activities. Energy sector is one of the biggest harmful greenhouse gases emission producer, hence, decision-makers within the energy sector are forced to promote and build environmental friendly and sustainable power generation plants. To this end, the concept of sustainability in the electricity sector has attracted so much attention from academics and industrial practitioners over the last three decades. Albeit, an important number of sustainability assessment frameworks for electricity generating technologies are found in the current literatures, three major drawbacks have emerged from those frameworks. Firstly, there is a lack of a holistic and comprehensive sustainability assessment framework for different power generation plants. Secondly, from economic aspect, the most used model (Levelised Cost of Electricity) to measure the cost performance of various electricity generating technologies is biased and is not inclusive enough, because, it only considers the capital, Operations and Maintenance, and fuel costs. Hence, snubbing crucial elements to business decision. Lastly, in the current literature, there is no a single sustainability assessment model that considers all the phases of electrical energy’s lifecycle. Considering these flaws, the novelty of this study is the development of a new, holistic theoretical sustainability assessment framework for power generation plants. The developed theoretical model includes 19 impact categories, 52 potential indictors, and 10 end points environmental, economic, and social aspects.

Herein, the mechanical properties and carbonation durability of engineered cementitious composites (ECC) were studied. For cost-efficient utilization of ECC materials, polypropylene (PP) and hydrophilic polyvinyl alcohol (PVA) fibers were employed to cast different types of specimens. The compressive strength, Poisson’s ratio, strength-deflection curves, cracking/post-cracking strength, impact index, and tensile strain-stress curves of the two types of ECC materials, with different fiber contents of 0 vol%, 1 vol%, 1.5 vol% and 2 vol%, were investigated by conducting compressive tests, four-point bending tests, drop weight tests, and uniaxial tensile tests. In addition, the matrix microstructure and failure morphology of the fiber in the ECC materials were studied by scanning electron microscopy (SEM) analysis. Furthermore, carbonation test and steel corrosion after carbonization were employed to study durability resistance. The results indicated that for both PP fiber- and hydrophilic PVA fiber-reinforced ECCs, the compressive strength first increases and then decreases as fiber content increases from 0 vol% to 2 vol% and reaches the maximum at 1 vol% fiber content. The bending strength, deformation capacity, and impact resistance show significant improvement with increasing fiber contents. The ECC material reinforced with 2 vol% PP fiber shows superior carbonized durability with maximum carbonation depth of only 0.8 mm.

Clinical rehabilitation and sports performance analysis both require the objectification of movement. Kinovea^© is a free 2D motion analysis software that enables the establishment of kinematics parameters. This low-cost technology has been used in sports sciences, as well as clinical field and research work. Although it has been validated as a tool with which to assess time-related variables, this is not yet the case regarding angular and distance variables. The main objective of this study was to determine the validity and reliability of the Kinovea software in obtaining angular and distance data at different perspectives of 90°, 75°, 60° and 45°. For this purpose, a figure with 29 points was designed (in AutoCAD) and 24 frames analysed. Each frame was examined by three observers who each made two attempts. For each export data item, 20 angles and 20 distance variables were calculated, with intra- and inter-observer reliability also analysed. To evaluate Kinovea reliability and validity a multiple approach was applied involving the following analysis: -systematic error with a two-way ANOVA 2x4; -relative reliability with ICC and CV (95% confidence interval); -absolute reliability with Standard Error. The results thus obtained indicate that the Kinovea software is a valid and reliable tool that is able to measure accurately at distances up to 5 m from the object and at an angle range of 90°–45°. Nevertheless, for optimum results an angle of 90° is suggested.

This economic evaluation aims to support policy-making on the combined use of pre-exposure prophylaxis (PrEP) with HIV vaccines by evaluating the potential cost-effectiveness of implementation that would support the design of clinical trials for assessment of combined product safety and efficacy. The target study population is a cohort of men who have sex with men (MSM) in the United States. Policy strategies considered include standard HIV prevention, daily oral PrEP, HIV vaccine, and their combination. We constructed a Markov model based on clinical trial data and published literature. We used a payer perspective, monthly cycle length, a lifetime horizon, and a 3% discount rate. We assumed a price of $500 per HIV vaccine series in the base case. HIV vaccines dominated standard care and PrEP. At current prices,PrEP was not cost-effective alone or in combination. A combination strategy had the greatest health benefit but was not cost-effective (ICER=$463,448/QALY) as compared to vaccination alone. Sensitivity analyses suggest a combination may be valuable for higher-risk men with good adherence. Vaccine durability and PrEP drug prices were key drivers of cost-effectiveness. Results suggest that boosting potential may be key to HIV vaccine value.

In small-scale hydropower scheme, the most important component is electro-mechanical equipment. Since cost contribution of this component is high because hydrokinetic projects require negligible civil works. Turbine and alternator contribute major fraction of the hydrokinetic projects. Thus, there is a requirement to estimates the electromechanical equipment cost for the hydrokinetic hydropower scheme. The present paper investigates design parameters of the hydrokinetic turbines and intends to develop cost correlation which depends on most critical parameters of hydropower sites such as velocity and power capacity. In this present work, three zero head turbines are considered including straight blade Darrieus, two Stage Savonius, and Gorlov Helical. The size and cost of major components have been calculated based on material, manufacturing, research and design, and assembly costs. Based on cost and site parameters, cost correlation has been developed. The obtained cost has been validated with available zero head turbines in the market and installed projects. A techno-economic analysis has been carried out to select economical hydrokinetic turbine for river and canal application.

Supermarkets in Port Harcourt (PH) city, Nigeria, predominantly rely on diesel electricity generation due to grid instability, leading to high cost of electricity prices. Although solar photovoltaic (PV) systems have been proposed as an alternative, these supermarkets have yet to adopt them, mainly due to high investment costs and a lack of awareness of the long-term financial and environmental benefits. This paper examines the technical and economic practicality of a PV system for these supermarkets using the PVsyst software and a spreadsheet model. Solar resources showed that PH has a daily average solar radiation and temperature of 4.21 kWh/m2/day and 25.73℃, respectively. Market Square, the supermarket with the highest peak power demand of 59.8 kW, and a 561 kWh/day load profile, was chosen as a case study. A proposed PV system with a power capacity of 232 kW, battery storage capacity of 34,021 Ah, a charge controller size of 100 A/560V, and an inverter with a power rating of 60V/75 kW has been designed to meet the load demand. The economic analysis showed a $266,936 life cycle cost, $0.12 per kWh levelized cost of electricity (LCOE), 4-year simple payback time, and a 20.5% internal rate of return (IRR). The PV system is feasible due to its positive net present value (NPV) of $165,322 and carbon savings of 582 tCO2/year.

This study examines the varying performance of low-cost sensors during seasonal smog events, particularly those resulting from solid fuel combustion linked to residential or industrial heating and other pollution sources. A prototype low-cost sensor node developed within this work was collocated for several months with reference equipment at an air quality monitoring station in the city of Ostrava (Moravian-Silesian region, Czech Republic). Deterioration of air quality during a pair of smog alert events, namely wintertime "Polish smog" episode and springtime "Saharan dust storm", which occurred through the extended period of co-location, was characterized quantitatively based on particulate matter and carbon monoxide concentrations measured by the low-cost sensors. These datasets were compared with reference data and model predictions provided by the Copernicus Atmospheric Monitoring Service. Selected low-cost sensors demonstrated linear response during Polish smog episode with highly correlated time series of carbon monoxide and particulate matter concentrations. However, when compared to reference data, the Sensirion SPS30 sensor is found to overestimate coarse particle (PM10) concentrations by the factor of two during winter evaluation period. On the other hand, oppositely biased PM10 response (underestimation by the factor of five) was determined from co-location measurement during Saharan dust storm event. This observation was attributed to combination of specific detection efficiency of the given low-cost sensor and shifts in particle size distribution due to seasonal change of ambient conditions.

Like many coastal lagoons in several countries, “Navío Quebrado” lagoon (La Guajira-Colombia) is a very delicate and precious environment; indeed, it is a nationally recognized Flora and Fauna Sanctuary. Several factors, amongst which climate change, are threatening its existence because of changes in the governing hydro-morphological processes. A first step to address this problem certainly is to understand its hydrological behavior and to be able to replicate via simulation its recent history and then infer likely futures. These potential futures will be marked by changes in the water input by its tributary, the Camarones River, and by a modified water exchange with the sea, according to a foreseen sea level rise pattern, as well as by a different evaporation from the free surface, according to temperature changes. In order achieve the required ability to simulate future scenarios, data on the actual behavior have to be gathered, i.e. a monitoring system has to be set up, which to date is not existent. Conceptually, designing a suitable monitoring system is not a complex issue and seems easy to implement. However, the environmental and socio-cultural and socio-economic context makes every little step a hard climb. An extremely simple –almost “primitive”- monitoring system has been set up in this case which is based on very basic measurements of current velocity and water levels and a direct participation of local stakeholders, first of all the National Park unit of the Sanctuary. All this may clash with the latest groovy advances of science, like in situ automatized sensors, remote sensing, machine learning and digital twins, and certainly several improvements are possible and desirable. But it has strong positive points: it is providing surprisingly reasonable data and…it is working at almost zero additional cost. Several technical difficulties made this exercise interesting in itself and worth being shared. Its novelty lies in showing how old, simple methods may offer a working solution to new challenges. This humble experience may be of help in several other similar situations across the world.

Interoperable multilayer networks are pivotal and transformative in public digital health. They not only enhance the delivery of healthcare services but also contribute significantly to improving public health outcomes. Through better accessibility, efficiency, and data-driven decision-making, these networks are revolutionizing how we approach public health. The seamless data exchange and integration they facilitate across different healthcare systems and providers can lead to substantial cost savings for public healthcare systems. These networks pave the way for a more efficient and effective healthcare system by reducing redundancies, optimizing resource allocation, and minimizing unnecessary procedures. This study combines the pressing issues of public digital health with the innovative interpretation of multilayer network theory, proposing practical solutions that inspire academics and practitioners alike.Public digital health is not just about improving care access and patient engagement. It is also about ensuring the financial sustainability of our healthcare systems. Innovative multilayer network analysis is critical in this game, improving interoperability and reducing spatial and temporal constraints. These networks streamline processes and improve efficiency by easing complex interactions within healthcare systems. This process, in turn, allows healthcare providers to deliver high-quality care at a lower cost, transforming, whenever possible, in-patients and out-patients into home-patients. Networks are a cornerstone and a beacon of hope for transforming public digital health. They are increasing the Value for Money and enhancing a patient-centric approach, making us optimistic about the future of healthcare.This study shows that revolutionizing digital healthcare methodologies has a profound impact on crucial elements like resilience, interoperability, and patient well-being within public health. The enhancement of interoperability facilitates the smooth flow of data exchange across various platforms and healthcare providers, fostering improved collaboration and decision-making processes and elevating the safety of patients.

Background: GaitSmart (GS) is a sensor-based digital medical device that can be used with the integrated app vGym to provide a personalised rehabilitation programme for older people undergoing total hip arthroplasty (THA) or total knee arthroplasty (TKA). This study aimed to determine whether the GS intervention used in the rehabilitation of older people undergoing THA or TKA is potentially cost-effective compared to the current standard of care (SoC). Methods: Decision-analytic modelling was conducted to estimate cost-effectiveness over a seventeen- week time horizon, from an NHS perspective. UK clinical and cost data from the GaitSmart randomised clinical trial was used to obtain input parameters, and sensitivity analysis was performed to address uncertainty. Results: Over a seventeen-week time horizon, GS incurred cost savings of £450.56 and a 0.02 gain in quality-adjusted life years (QALYs) compared to the SoC. These results indicate that GS is the dominant intervention because the device demonstrated greater effectiveness and lower costs. Probabilistic sensitivity analyses confirm the robustness of our results. Conclusion: GS appears to offer short-term efficiency benefits and demonstrates cost-effectiveness for the improvement of gait in people undergoing THA or TKA, compared to the SoC. These findings provided new evidence to inform policymakers.

Investments in small and medium-sized anaerobic digestion facilities have the potential to boost biogas production in Greece and other EU countries. This study aimed to evaluate the economic feasibility of anaerobic digestion facilities equipped with combined heat and power (CHP) units ranging from 50 to 400 kW, while treating livestock waste. For this purpose, data were gathered from various livestock operations (dairy cattle, poultry, swine, dairy sheep and goat) regarding their annual production, revenues, electricity and fuel usage, and waste generation. Waste samples were then collected and analyzed to assess their biochemical methane production potential. The capital and operational costs of anaerobic digestion facilities, from 50 and 400 kW, were calculated using the equations developed within the “eMT cluster” project. Findings indicate that current feed-in tariffs (FIT) of 0.21 € kWh-1 are insufficient to incentivize investment in anaerobic digestion facilities with capacities below 250 kW, highlighting the need for increased FIT rates or capital expenditure subsidies. Recommendations include shifting towards simplified technology and business models with reduced farmer involvement, coupled with supportive legislative framework and long-term electricity price guarantees. These measures are expected to foster the implementation of anaerobic digestion projects in the animal husbandry sector.

The use of e-scooters and e-bicycles has been on the rise with an increased medical and financial burden. Our purpose was to identify risk factors for increased medical charges and recommend appropriate steps. We studied a retrospective cohort presenting to a level 1 urban trauma center from January 2018 through July 2019 due to micro-mobility platforms. The primary outcome for comparison was total billing cost and a regression analysis was performed to identify variables associated with higher cost. A total of 4073 patients were identified. The majority of which were males (67%), aged 20-30 years (41%). Helmet use reported in only 39.8%. Radiologic studies were performed more often in the e-bicycle group. Total billing charges amounted to 28.3 million New Israeli Shekels ($7.9 million). Average total cost was higher for e-bicycle injuries and in non-helmet users. Other factors associated with higher cost were age, and time of day 12:00-18:00. We recommend that urban cities invest in infrastructure in advance to micro-mobility introduction, regulate the use of e-platforms, designate resources for education on personal protective equipment and prepare medical centers in advance.

In large-capacity energy storage systems, instructions are decomposed typically using an equalized power distribution strategy, where clusters/modules operate at the same power and durations. When dispatching shifts from stable single conditions to intricate coupled conditions, this distribution strategy inevitably results in increased inconsistency and hastened system aging. This paper presents a novel differentiated power distribution strategy comprising three control variables: the rotation status, the operating boundaries for both Depth of Discharge (DOD) and C-rates (C) within a control period. The proposed strategy integrates an aging cost prediction model developed to express the mapping relationship between these control variables and aging costs. Additionally, it incorporates the multi-colony particle swarm optimization (Mc-PSO) algorithm into the optimization model to minimize aging costs. The aging cost prediction model consists of three functions: predicting health features (HFs) based on the cumulative charge/discharge throughput quantity and operating boundaries, characterizing HFs as comprehensive scores, and calculating aging costs using both comprehensive scores and residual equipment value. Further, we elaborated on the engineering application process for the proposed control strategy. In the simulation scenarios, this strategy prolonged the service life by 14.62%, reduced the overall aging cost by 6.61%, and improved module consistency by 21.98%, compared with the traditional equalized distribution strategy. In summary, the proposed strategy proves effective in elongating service life, reducing overall aging costs, and increasing the benefit of energy storage systems in particular application scenarios.

This paper shows the firsts results of a methodological approach in which Remote Sensing technologies (Satellite imagery and LiDAR) combined with Least Cost Path algorithm on GIS are being tested like tools to overcome locally-based interpretations about populational patterns and communication routes during Flavian municipality in the Comarca de El Condado region. The identification of fourteen hypothetical communication routes between already known archaeological sites thanks to a recent archaeological prospection, and the confirmation of three sections of them and a new archaeological site demonstrate that the combined use of the aforementioned technics has a very useful to delve more deeply, more widely and at a variety of different scales into the relation between the twelve known/selected Early Roman Empire sites and the surrounding landscape in the right bank of Guadalén River. It is expected that, in next phases, this methodological approach will allow us to go deeper in analysing and understanding spatial distribution, exploitation, and interrelation between different Early Roman Empire sites, helping us to fill the aforementioned gaps in our understanding of the archaeological continuum in the region reducing time and costs.

Integration of 5D Building Information Modelling (BIM) into large rail projects has the potential to significantly enhance cost management and control. Nevertheless, 5D-BIM implementation has encountered difficulties stemming from technical, functional, and governance-related factors. This paper builds a conceptual framework to support financial decision-making, enhances project management, and promotes efficient project delivery. The framework encompasses a set of interrelated elements that include project governance, BIM policies and standards, digital platforms, BIM LOD, cost estimation classification, and continuous improvement. The proposed framework acknowledges the significance of project governance in guiding and organizing the implementation of 5D-BIM. Additionally, BIM policies and standards ensure the adherence to quality standards for the produced BIM models. Digital platforms serve as the basis for multiple users to generate, access, share, and exchange project information. BIM LOD promotes collaboration and coordination among all project stakeholders. Cost estimation classification aligns the estimation process with the development of project scope and financial decision-making. Continuous improvement plays a vital role in optimizing processes, enhancing efficiency, and achieving higher-quality outcomes. Moreover, it fosters stakeholder satisfaction, improves project performance, and nurtures a conducive environment for innovation and learning. The study analyses the framework utilization in the Victorian rail projects and identifies key implementation challenges. This can be summed up as follows: The main technical hurdles were the lack of current horizontal infrastructure standards for data exchange and the lack of compatibility with current cost management standards. Increased project complexity and the absence of clear project governance strategies and processes posed organizational challenges. A further validation of the framework in real-world rail projects was recommended to achieve the implementation goals.

Lump sum contracts are specific contracts used in the construction industry to give owners financial certainty and decrease risk while incentivizing contractors to finish projects on schedule and within budget. This article discusses the usage of lump sum contracts in construction projects, covering the types of projects appropriate for lump sum contracts, critical considerations for entering a lump sum contract, and the tender and preliminary expenses involved. The article also covers lump sum contracts' benefits and drawbacks and how owners and contractors allocate risk. Finally, the difficulties of implementing lump sum contracts, such as potential disagreements over scope changes and quality issues, are investigated. In general, lump sum contracts can be a valuable tool for managing construction projects, but their execution necessitates careful planning and collaboration to ensure successful completion.

This article summarizes Chinese framework for regulating artificial intelligence and integrates evolutionary game theory with cost-benefit analysis to establish a model and simulation. This framework is employed to analyze the behavioral trends among three distinct entities: governmental bodies, third-party independent institutions, and AI companies within the context of regulatory relationship. The findings indicate that: (1) The cost-benefit dynamics within the regulatory legal nexus significantly influence the behaviors of these entities; (2) Under the condition of normalized government regulation approaching full enforcement, the behavioral choices of third-party independent institutions and AI companies exhibit cyclical fluctuations.The paper draws two principal conclusions: (1) The regulatory framework need to be tailored to the specific risks presented by AI and the relative costs and benefits of legal enforcement in different jurisdictions. (2) From a cost-benefit standpoint, government intervention in AI regulation ought to be circumscribed, with government regulation focusing on critical legal risks. Other aspects of regulatory control should be delegated to cooperative legal framework that allows the participation of the independent third-party institution,which brings a nuanced and specialized approach to the governance of AI.

Inverse optimal control is a method for recovering the cost function used in an optimal control problem in expert demonstrations. Most studies on inverse optimal control have focused on building the unknown cost function through the linear combination of given features with unknown cost weights, which are generally considered to be constant. However, in many real-world applications, the cost weights may vary over time. In this study, we propose an adaptive online inverse optimal control approach based on a neural-network approximation to address the challenge of recovering time-varying cost weights. We conduct a well-posedness analysis of the problem and suggest a condition for the adaptive goal, under which the weights of the neural network generated to achieve this adaptive goal are unique to the corresponding inverse optimal control problem. Furthermore, we propose an updating law for the weights of the neural network to ensure the stability of the convergence of the solutions. Finally, simulation results for an example linear system are presented to demonstrate the effectiveness of the proposed strategy. The proposed method is applicable to a wide range of problems requiring real-time inverse optimal control calculations

As the international community attaches importance to environmental and climate issues, carbon dioxide emissions in various countries have been subject to constraints and limits. Carbon trading market, as a market tool to reduce greenhouse gas emissions, has gone through a development process from a pilot carbon market to a national carbon market in China. At present, the industries included in the national carbon market are mainly the electric power industry, and the carbon emissions of the electric power industry account for about 40% of the national carbon emissions. According to the construction history of foreign carbon markets, China's future carbon quota allocation will gradually transition from free allocation to auction allocation,the auction mechanism will bring a heavy economic burden to the electric power industry, especially the thermal power generation industry. Therefore, this study takes Guangdong Province as an example to optimize the power generation mix with the objective of minimizing the total economic cost after the innovative introduction of the carbon quota auction mechanism and constructs an optimization model of the power generation mix based on the auction ratio by comprehensively applying the system dynamics model and the multi-objective linear programming model and systematically researches the power generation structure under different auction ratios with the time scale of months and quantitatively evaluates the economic inputs needed to reduce the greenhouse gas emissions.The results of the study show that after comprehensively comparing the total economic cost, renewable energy development and carbon emissions, it is the most scientific and reasonable to set the auction ratio of carbon allowances at 20%, which achieves the best level of economic and environmental benefits.

Antimicrobial resistance (AMR) poses a global public health threat, with rates directly linked with consumption. The World Health Organization (WHO) AWaRе-classification aims to guide antibiotic use, which is influenced by drug availability, affordability, and economic policies. In Jordan, a high proportion of consumed antibiotics belong to the 'Watch' category. Data from the WHO-AWaRе classification, the Essential Medicines List, and the Jordan Food and Drug Administration were analyzed. Antibiotics for adults were classified and their cost per Defined Daily Dose (DDD) was determined, then affordability was assessed. In 2023, 43 injectable and 43 oral antibiotics for adults were registered in Jordan. 'Watch' antibiotics were the most common. 'Access' antibiotics had the lowest cost/DDD. 'Rеsеrvе' antibiotics were the most expensive with few generics. Injectable antibiotics had a negative correlation between cost and the number of alternatives. Affordability was higher for oral antibiotics compared to injectable ones. 'Rеsеrvе' antibiotics were generally unaffordable. This study highlights the need to promote 'Access' antibiotics over other categories by encouraging registration of missing ‘Access’ antibiotics and adjusting 'Watch' and 'Rеsеrvе' antibiotic prices. Competition among generics can lead to lower prices, increasing affordability and accessibility. We emphasize the importance of the AWaRе-classification in guiding antibiotic use in Jordan.

This publication aims to disseminate a step-by-step process that walks through the conceptualization and building of a low-cost (~ $150 monitoring device for airborne fine particulate matter (PM2.5), based on miniaturized sensors and components. Details on the implementation of the hardware and software are provided which facilitate the data acquisition, capture and analysis. The central components and their setup discussed in what follows include: the sensor device (called “P.ALP” – Ph.D. Air quality Low-cost Project), Arduino IDE (Integrated Development Environment) and R code (open-access software). A monitoring device for PM2.5, using low-cost sensors and technologies was successfully conceptualized, designed, and implemented. The P.ALP monitoring system was designed and developed to be a basic device, which can be further customized and implemented using the wide range of low-cost sensors available on the market.

Nanostructured transition metal nitrides (TMNs) have been considered a promising substitute for precious metal catalysts toward ORR due to their multi-electron orbitals, metallic properties, and low cost. To design TMNs catalysts with high catalytic activity toward ORR, the intrinsic features of the influencing factor on the catalytic activity toward ORR of nanostructured TMNs need to be investigated. In the paper, titanium nitride (TiN), zirconium nitride (ZrN), and hafnium nitride (HfN) nanoparticles (NPs) are high-efficiency and one-step synthesized by the direct current arc plasma. TiN, ZrN, and HfN NPs with an oxidation layer are applied as the catalysts of hybrid sodium-air batteries (HSABs). The effect of composition and structure attributes of TMNs on ORR catalysis is defined as follows. (ⅰ) Composition effect. With the increase of the oxygen content, the catalytic ORR capability of TMNs decreases progressively due to the reduction of oxygen adsorption capacity; (ⅱ) Structure effect. The redistribution of the density of states (DOS) of ZrN indicates higher ORR activity than TiN and HfN. HSABs with ZrN exhibit an excellent cyclic stability up to 137 cycles (about 140 h), an outstanding rate performance, and a specific capacity of 2817 mAh·g−1 at 1.0 mA·cm−2.

Blasting pattern optimization is an attempt to optimize blast design parameters aiming to achieve optimum fragmentation, reduce mining operating costs as well as environmental side consequences. The present study aims to propose a multi-objective optimization model, employing artificial intelligence and metaheuristics, to simultaneously minimize the mine-to-crusher operating costs and the impact of blasting consequences including fly-rock and back-break. To achieve the purpose of the study, a multi-variable regression model was developed to model total costs from drilling to crushing. In addition to the costs, multilayer perception neural networks were implemented to predict the blast-induced back-break and fly-rock as a function of collected variables such as number of holes, hole length, burden, spacing, hole slope, stemming, blasted rock per hole, powder factor, and charge per delay. High-precise estimations for both back-break and fly-rock were achieved with the average of 99% coefficient of determination for train, test and validation data sets. Then, the developed regression model and the neural networks were used in an optimization framework, employing Grasshopper algorithm, to find the optimum blast design satisfying practical constraints. The proposed model was tested on a lead-zinc open-pit mine, where 1032 blasting patterns were recorded and analyzed. The results of the optimization model provide a Pareto set of solutions, such that any of these solutions can be implemented according to the strategy of the mining operation management team. The blast pattern with the lowest cost, result in a relatively high fly-rock and back-break, while the pattern with low fly-rock and back-break raises the cost by 20.13 % compared the minimum cost blast design.

The established classical method of treating oil refinery effluent is flotation followed by biological treatment. Membrane bioreactors (MBRs) offer more advanced treatment, producing a clarified and potentially reusable treated effluent, but demand robust pretreatment to remove oil and grease (O&G) down to consistent, reliably low levels. An analysis of a full-scale conventional oil refinery ETP based on flotation alone, coupled with projected performance, energy consumption and costs associated with a downstream MBR, have demonstrated satisfactory performance of flotation-based pre-treatment. The flotation processes, comprising an API separator followed by dissolved air flotation (DAF), provided ~90% removal of both total suspended solids (TSS) and O&G coupled with 75% COD removal. The relative energy consumption and cost of the pretreatment, normalised against both the volume treated and COD removed, was considerably less for the API-DAF sequence compared to the MBR. The combined flotation specific energy consumption in kWh was found to be almost an order of magnitude lower than for the MBR (0.091 vs 0.86 kWh per m3 effluent treated), and the total cost (in terms of the net present value) around one sixth that of the MBR. However, the nature of the respective waste streams generated and end disposal of waste solids differs significantly between the pretreatment and MBR stages.