The analysis of drugs is a priority in public health, particularly antibiotics which develop resistance due, among other things, to bad dosages or poor quality of the active substance. In this study, we evaluated eight antibiotics available in health centers in Djibouti through qualitative and quantitative analysis. The tests were based on high-purity reference products. In qualitative analysis by HPLC, only amoxicillin presented two impurity peaks. This observation is found in the dosage of this active ingredient with a value of 83 ±0.6 mg instead of the 500 mg indicated on the label. It will be necessary to diversify the sample’s provenance to seek the origin of this degradation.

Drug abuse is a major issue worldwide. Methylphenidate (MPH) and alprazolam (ALZ) are commonly prescribed drugs for the treatment of ADHD and anxiety disorders, respectively. The limited studies suggest that abusers primarily use benzodiazepines to counteract adverse effects associated with methylphenidate usage. The main aim of this study was to investigate the interaction of drugs with DNA using spectroscopic methods. Female Wistar rats were administered with MPH (10, 20, 40 mg/kg) and ALZ (5, 10, 20 mg/kg) alone and in combination for a period of 28 days. The FT-IR and UV results reveal some spectral changes in a dose-dependent manner, which indicates interactions of drugs with DNA. Thus, the changes in spectral peaks provide some insight into the mechanism of the interaction of drugs with DNA.

Tomato (Solanum lycopersicum), an important vegetable crop, is a host for numerous pests and pathogens. Consequently, tomato breeders are striving to improve pest resistance. Many acces-sions of the wild relative S. habrochaites display high resistance towards arthropod pests such as spider mites and whiteflies and the presence of the sesquiterpene hydrocarbon 7-epi zingiberene in its trichomes has been associated with arthropod resistance. Consequently, tomato breeders are attempting to introgress 7-epi zingiberene from wild to cultivated tomato, which requires the ability to quantify zingiberene. 7-Epi zingiberene has conjugated double bonds causing it to ab-sorb uv light. In fact, de Freitas, et al. [1] have claimed that measurement of absorbance at 270 nm of tomato leaflet washes can be used to quantify zingiberene. However, this claim has never been critically evaluated. We initially evaluated the use of uv absorbance to estimate zingiberene content of leaflet washes from an interspecific hybrid tomato BC4F2 generation that was segre-gating widely for presence and abundance of zingiberene. When absorbances at 270 nm were compared with zingiberene measured by gas chromatography the resulting relationship did not obey the Beer-Lambert law. Consequently, we examined in detail aspects of the uv-absorbance of zingiberenoids by: 1) obtaining uv absorbance spectra for three isolated zingiberenoids and de-termining the relationship between the abundance of each isolated compound and absorbance at single wavelengths; 2) obtaining uv absorbance spectra of leaflet washes of relevant wild acces-sions and parents; 3) obtaining average absorbance spectra for interspecific generations of tomato that were segregating for abundance of zingiberenoids and determining their λmax values in the 250-280 nm region; 4) evaluating by regression the relationship between absorbance at a single wavelength and the concentration of zingiberene and when present, its derivatives, as measured by gas chromatography in several interspecific hybrid generations; and 5) exploring the potential use of absorbances at multiple wavelengths to improve estimates of concentrations of zingi-berenoids. Results indicated that isolated zingiberenoids as well as leaflet washes of wild tomatoes that contain zingiberenoids have broad absorbance spectra in the uv region with a λmax of 264 nm. The relationship between abundance of isolated zingiberenoids and absorbance at a single wavelength of 264 nm did obey the Beer-Lambert Law. Average absorbance spectra for leaflet washes from BC3F5 generation plants sampled by two methods, as well as from a BC5F1 and a BC3F3 generation showed subtle shifts in the λmax away from 264 nm. Furthermore, the rela-tionship between absorbance at 264 nm and zingiberenoid content of these generations did not obey the Beer-Lambert Law in that in each case regression of absorbance on zingiberenoid content of the leaflet washes resulted in non-zero intercept estimates that varied considerably among generations and sampling methods. Use of multiple wavelengths for estimation zingiberenoids in these breeding generations was explored and inclusion of additional absorbances at one or two wavelengths identified by stepwise regression always improved estimates of zingiberenoid content from absorbance data. However, the identified wavelength(s) differed among generations. Taken together the results indicate that measurement of absorbance of tomato leaflet washes at a single wavelength is not a reliable quantitative estimate of zingiberenoids in the leaflet wash. These estimates can be improved by utilizing absorbance at multiple wavelengths, but the par-ticular wavelengths will likely vary among generations. Lastly, measurement of absorbance may be a useful tool in identifying those relatively rare individuals in a generation that is widely segregating for zingiberenoid content. However, even in this situation the determination of the actual zingiberene content e.g., for comparison with the donor parent, would need to be back-stopped by a valid quantitative method such as gas chromatography.

The extensive use of engineered nanoparticles (ENPs) such as zinc oxide nanoparticles (ZnO NPs) in various commercial fields has spurred significant concern about its possible toxicological effects of ZnO NPs on human health and eco-system. Therefore, it is substantial to understand the aggregation phenomena which could attenuate this effect. This data article provides information on aggregation of ZnO NPs under the influence of various parameters of water chemistry. Moreover, Taguchi orthogonal array L27(313) design matrix was used to evaluate the effect of multiple parameters in aqueous solution. The data were obtained from single beam UV-Vis spectrophotometer (Optizen 2120 UV, Mecasys, Korea) using Optizenview 4.2.5 PC interference software, Fourier transform infrared spectrometer (FT/IR-4700, spectroscopy, JASCO Analytical Instruments, Easton, USA) and particle electrophoresis (NanoZS, Zetasizer, Malvern Instruments Ltd, Worcestershire, UK). The dataset draws attention on dominant parameters influencing aggregation of ZnO NPs in water. The analysis of variance (ANOVA) data revealed that electrolyte concentration, type and natural organic matter (NOM) concentration were the most significant parameters. Furthermore, FT-IR data presents a possible mechanism of ZnO NPs stabilization in the presence of different NOM. This data will be helpful for the development of environmental risk assessment strategies and prediction of fate and mobility of other ENPs in the aquatic environment.

The requirement for developing tools capable of detecting and monitoring heavy metals (HMs) has recently taken on more significance due to worries about their toxic effect on human health and aquatic habitats. In this study, a simple electrochemical sensing carbon paste electrode (CPE) based on composite of Zinc/Iron layered double hydroxide (LDH) and polyaniline (PANI) was developed for the determination of lead ions in aquatic solutions. For this purpose, Zn-Fe LDH/PANI was prepared and characterized by Fourier transform infrared (FTIR), X ray diffraction (XRD), and scanning electron microscopy (SEM). Modified carbon electrode based Zn-Fe LDH/PANI was electrochemically characterized compared with unmodified electrode in FCN as a redox probe using cyclic voltammetry (CV). Thus, Zn-Fe LDH/PANI was utilized as sensing material for the electrochemical determination of lead ions using differential pulse voltammetry (DPV). Zn-Fe LDH/PANI/CPE show limits of detection (LOD) and quantification (LOQ) of 167.8 nM and 559.4 nM, respectively. Zn/Mg/Fe LDH was prepared using co-precipitation method and characterized by XRD, FTIR, SEM and BET, used for removal of Pb+2 ions. Removal process was investigated at different conditions as pH, metal ion concentrations, starting adsorbent dose at first and contact time. Zn/Mg/Fe LDH was evaluated as an effective adsorbent material for lead ions elimination in aquatic solutions, with capacity of adsorption 700 mg/g. The elimination of lead ions on Zn/Mg/Fe LDH fitted the pseudo first-order kinetics model and the isotherm was matched with Langmuir model. Studies revealed that the ideal removal conditions were pH = 5.0, an adsorbent mass of 0.05 g, and 20 ml of 50 ppm metal ion concentration at 60 min. The Zn-Fe LDH/PANI composite also showed potential anti-cancer properties against lung cancer cells (A549) while maintaining safety for normal lung fibroblast cells (WI-38). Collectively, advancements in electrochemical sensors offer promising solutions for lead ion detection, with wide-reaching applications in wastewater treatment and cytotoxicity assessment. These innovations have the potential to enhance environmental monitoring and public health safety.