Despite the existence of pasteurization and its advocacy worldwide, most marketed milk in a developing country like Nigeria are sold raw by the locals. It costs hundreds of millions of Naira to set up a conventional pasteurizing plant in Nigeria. Boiled milk ends up curdling which results in to a loss of nutrients, so it is not beneficial to treat milk by this method. This paper hence presents the re-designing and fabrication of the contact area of a solar milk pasteurizer

The solved research problem is oriented to the implementation of advanced methods of component design and their sophisticated use in the ever-advancing additive manufacturing. Based on the stated objectives, the research was divided into several parts. Initially, the methods and principles of design in additive manufacturing were evaluated and investigated, from which the intent was subsequently defined and the DfAM method in the component design and development process was determined. The given design method, namely topology optimization (TO), was applied to multiple development and production cycles of additive manufacturing parts to validate the research conclusions. In this paper, the procedure for a specific part or component assembly is shown. By evaluating the developed design procedure using the TO method included in the design process, the conclusions are positive in terms of both time savings and properties of the designed part such as strength and weight parameters. The given findings need to be further developed by implementing on specific product lines for increasing the efficiency of the developed design methodology.

Micro satellites must survive severe mechanical conditions during their launch phase. Therefore, structural design requirements are imposed on the micro satellites. These requirements are the strength requirement and the stiffness requirement. Usually, the structural design of a micro satellite is performed using the internal stress analysis and the natural frequency analysis, which are based on a Finite Element Method (FEM). The validity of this structural design is evaluated through vibration tests. In an early stage of development, which has a FEM model of a satellite in the process of creation, presumption of the natural frequency of a satellite may be difficult. In this study, a simple method for determining the longitudinal and lateral minimum natural frequencies of the micro satellites during the ascent phase was clarified. The structure of the micro satellites used in this research is made of aluminum alloy, and they have a monocoque structure. The Young's modulus and moment of inertia of area used to calculate the minimum natural frequencies were determined using the area ratio of the monocoque structure to the entire satellite. When this method is used, the estimated minimum natural frequencies of the longitudinal direction and the lateral direction are in agreement with the measured values acquired by the vibration tests. In order to shorten the process of micro satellites development, this paper describes a practical estimation method of the minimum natural frequency for micro satellites.

Public parks are a community resource with an important role in improving liveability, physical, and mental wellbeing. However, exercise facilities that are suitable for people with disabilities typically have been neglected in public park design. As such, people with disabilities often are unable to independently or safely use the park. To address this shortcoming, the objective of this paper was to employ a pragmatic research through designing process in developing the design for an inclusive park. We used a mixed-methods approach in the research that included review of previous studies, semi-structured interviews, and questionnaire surveys with stakeholders were applied as design integration. Persons with disabilities specifically were consulted to express their views on all matters of inclusive park design.

As the number of infections and deaths caused by the recent COVID-19 pandemic is increasing dramatically day-by-day, scientists are rushing towards developing possible counter-measures to fight the deadly virus, SARS-CoV-2. Although many efforts have already been put forward for designing and developing potential vaccines, however, most of them are proved to possess negative consequences. Therefore, in this study, the methods of immunoinformatics were exploited to design novel epitope-based subunit vaccine against the SARS-CoV-2, targeting four essential proteins of the virus i.e., spike glycoprotein, nucleocapsid phosphoprotein, membrane glycoprotein, and envelope protein. The highly antigenic, non-allergenic, non-toxic, non-human homolog and 100% conserved (across other isolates from different regions of the world) epitopes were used for constructing the vaccine. In total, fourteen CTL epitopes and eighteen HTL epitopes were used to construct the vaccine. Thereafter, several in silico validations i.e., the molecular docking, molecular dynamics simulation (including the RMSF and RMSD studies), and immune simulation studies were also performed which predicted that the designed vaccine should be quite safe, effective, and stable within the biological environment. Finally, in silico cloning and codon adaptation studies were also conducted to design an effective mass production strategy of the vaccine. However, more in vivo and in vitro studies are required on the predicted vaccine to finally validate its safety and efficacy.

This paper proposes a product design model for internalising users’ positive experiences through attachment. First, the research commences with a literature review to define the concepts and research status of positive experience design (PED) and product attachment. Subsequently, the design model is constructed, accompanied by relevant formulas for concept generation. Finally, the model’s validity is verified through a workshop, and its effectiveness is evaluated and discussed using the USE questionnaire. This study incorporates the seven factors of product attachment to activate positive states within the user–product relationship and facilitate the cultivation of positive thinking. Grounded in theories of PED and embracing a product attachment perspective, the attachment-driven PED model offers a systematic approach for generating design concepts that are relevant to user experience.

The Novel Coronavirus (COVID-19) is a positive-sense single-stranded RNA ((+)ssRNA) virus. The COVID-19 Main Proteases play very important role in the propagation of the Novel Coronavirus (COVID-19). It has already killed more than 8000 people around the world and thousands of people are getting infected every day. Therefore, it is very important to identify a potential inhibitor against COVID-19 Main Proteases to inhibit the propagation of the Novel Coronavirus (COVID-19). We have applied a drug repurposing approach of computational methodology, depending on the synergy of molecular docking and virtual screening techniques, aimed to identify possible potent inhibitors against Novel Coronavirus (COVID-19) from FDA approved antiviral compounds and from the library of active phytochemicals. On the basis of recently resolved COVID-19 Main Protease crystal structure (PDB:6LU7), the library of 100 FDA approved antiviral compounds and 1000 active components of Indian Medicinal Plants extracted for screening against COVID-19 Main Protease. The compounds were further screened using Pyrex virtual screening tool and then best inhibitors, top 19 compounds optimally docked to the COVID-19 Main Protease structure to understand the participation of specific amino acids with inhibitors at active sites. Total 19 best compounds were identified after screening based on their highest binding affinity with respect to the other screened compounds. Out of 19, 6 best compounds were further screened based on their binding affinity and best ADME properties. Nelfinavir exhibited highest binding energy -8.4 kcal/mol and strong stability with the TRP207, ILE281, LEU282, PHE3, PHE291, GLN127, ARG4, GLY283, GLU288, LYS5, LYS137, TYR126, GLY138, TYR126, SER139 and VAL135 amino acid residues of COVID-19 Main Protease participating in the interaction at the binding pocket. In addition to Nelfinavir (-8.4), Rhein (-8.1), Withanolide D (-7.8), Withaferin A (-7.7), Enoxacin (-7.4), and Aloe-emodin (-7.4) also showed good binding affinity and best ADME properties. Our findings suggest that these compounds can be used as potential inhibitors against COVID-19 Main Protease, which could be helpful in inhibiting the propagation of the Novel Coronavirus (COVID-19). Moreover, further in vitro and in vivo validation of these findings would be very helpful to bring these inhibitors to next level study.

Antibiotic resistance has emerged as one of the major concerns to public human health due to issues in treatment and control of major infectious diseases. From discovery of penicillin in 1940, the antibiotic resistance originated and now developed the microorganisms as resistive strains to the major available antibiotics. Furthermore, studies on this captivating activity of the microbes provide insight into the complexities of microbial physiology and may offer some guidance in preventing the onset and consequent development of antibiotic resistance. Despite of initiatives taken in last few decades to overcome the issues, the trends of antibiotic resistance gained much peak. Antibiotic resistance appears to have emerged as a result of various factors including antibiotics being misused and overused in both the medical field and the agricultural sector. Important factors in the development of antibiotic resistance also include bacterial mutation, unplanned evolution, and horizontal gene transfers. In addition, antibiotics resistance imposed the financial consequences to public health and drug development research. Future advancements related to innovative antibiotics and molecular drug designing become challenge for researchers due to intensive multiple antibiotics resistance among human population. Many researches have been conducted on origin, evolutionary aspect of antibiotic resistance and mechanisms of antibiotics resistance, but its effect on future drug development is little understood. Therefore, the recent review will highlight the role of antibiotic resistance in drug designing and impacts of antibiotic resistance on drug development in future.