Article
Version 1
Preserved in Portico This version is not peer-reviewed
Voltage Control for DC-DC Converters
Version 1
: Received: 15 August 2018 / Approved: 16 August 2018 / Online: 16 August 2018 (14:10:02 CEST)
How to cite: Rahat, U.; Basit, A.; Salman, M. Voltage Control for DC-DC Converters. Preprints 2018, 2018080288. https://doi.org/10.20944/preprints201808.0288.v1 Rahat, U.; Basit, A.; Salman, M. Voltage Control for DC-DC Converters. Preprints 2018, 2018080288. https://doi.org/10.20944/preprints201808.0288.v1
Abstract
In this paper, we discuss voltage control method for buck converter operating in continuous conduction mode (CCM) using analog feedback system. The aim of this work is to control the output voltage of a buck converter during the variation in load current. This is obtained using analog feedback made with operational amplifier (Opamp). However, the same technique can be applied to other DC-DC converters (e.g boost, buck-boost, cuk converter, etc) in CCM mode, but for the purpose of analysis buck converter is chosen as an example.
Keywords
analog feedback, operational amplifier (Opamp), buck converter, continuous conduction mode.
Subject
Engineering, Electrical and Electronic Engineering
Copyright: This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Comments (0)
We encourage comments and feedback from a broad range of readers. See criteria for comments and our Diversity statement.
Leave a public commentSend a private comment to the author(s)
* All users must log in before leaving a comment