On 9 March 2020, two cases of COVID-19 were reported in Burkina Faso. As of 10 April 2020, a total number of 484 cases (404 cases in the Kadiogo province) were reported nationwide. Real-time forecasts of COVID-19 are important to inform decision-making in the country. Here, we propose an approach that tests the performance of four models (Exponential Growth model, the Generalized Growth model (GGM), the Generalized Logistic Growth, and Richards Growth model) to select the model that best fit data and to generate short-term forecasting (5-, 10-, and 15-day forecasts from 11 to 25 April 2020) in Kadiogo, the epicenter of the outbreak. Using daily number of confirmed COVID-19 cases, the results suggests that GGM performed the best out of the 4 models. Overall, our GGM predictions suggested an average total number of cumulative cases of 514 (95% CI, 464–559), 629 (95% CI, 559–691), and 750 (95% CI, 661–840) between 11 to 15 April, 16 to 20 April, and 20 to 25 April 2020, respectively. COVID-19 in this province was best approximated by sub exponential growth rather than exponential or logistic growth. Current data suggest that COVID-19 cases would continue to increase over the next 15-days.

This study investigates the influence of economic growth on CO2 emissions levels in three developed countries—Argentina, Equatorial Guinea, and South Korea—based on their status as high-income countries. We test the environmental Kuznets curve (EKC) hypothesis using the time series approaches to check the relationship and direction of causality among the variables over a sample spanning 1974–2020. The results show an inverted U-shaped short-run relationship in all three countries. In the long run, only South Korea supports the EKC hypothesis. Further, Granger causality results indicate the existence of causality. These long-run causal relationships between economic growth and emissions recommend one policy implication that wealthy governments must expand investments in renewable clean energy projects and R&D, with regulatory measures to suppress harmful environmental procedures and support environmentally friendly development.

In this paper, the validity of the Wagner’s law is investigated in tenth selected Sub- Saharan African countries, namely Botswana, Equatorial Guinea, Mauritania, Nigeria, South Africa, Sierra Leone, Tanzania, Ethiopia, Madagascar, and DR Congo. Five variants of the Wagner’s law were tested for the period 2005-2014, using panel econometric approaches encompassing cointegration and causality. The study found a long run relationship between the public expenditure and the various explanatory variables used as proxies of income. The long-run causality tests indicate that there is bidirectional causality between expenditure and income in all models with the exemption of the Gupta model. It is concluded that for Sub-Saharan Africa, both the Wagner’s law the Keynesian hypothesis tend to be valid under the period of investigation. The explanation is that there has been the tendency for public expenditure to grow relative to national income (Wagner’s law) and that public expenditure is a policy instrument (an exogenous factor) for improving national income (Keynesian hypothesis) during the 10-year period.

This article utilized electrodeposition technology to fabricate Zn and Zn-Y₂O₃-Al₂O₃ composite coatings on Q235 steel plates. The composite coatings were obtained by adding Y₂O₃/Al₂O₃ nanoparticles (0, 5, 10, and 15 g/L) to acidic chloride solutions. This study then examined the impact of these nanoparticles on the microstructure, morphology, microhardness, hydrophobicity, and corrosion resistance of the composite coatings. The results indicate that the addition of the nanoparticles increased the nucleation sites on the surface of the coating, thereby refining the grain size and reducing the roughness of the coating surface. When 10g/L of Y₂O₃ and 10g/L of Al₂O₃ nanoparticles were added, the hardness of the composite coating (369 Hv) was 2.49 times higher than that of the pure Zn coating (148 Hv), which was attributed to the dispersion strengthening and grain refinement effects of the nanoparticles. The corrosion resistance of the Zn and Zn-Y₂O₃-Al₂O₃ composite coatings was studied using linear sweep voltammetry and AC impedance spectroscopy. The addition of the nanoparticles improved the corrosion resistance of the composite coating, and the composite coating prepared in an electrolyte containing 10 g/L of Y₂O₃ and 10 g/L of Al₂O₃ nanoparticles exhibited the best corrosion resistance. Meanwhile, the composite coating exhibited good hydrophobicity, with a contact angle of 120.9°, 1.94 times that of the pure Zn coating (62.2°). The Zn-Y₂O₃-Al₂O₃ nanocomposite coating material has significant potential advantages in the field of steel corrosion.

As an on-going pandemic caused by the out-break of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) or simply COVID-19 sweeps through the globe at an unprecedented rate leaving behind trails of high infection and mortality, it is crucial to understand the propagation dynamics of the virus in a host population in order to take urgent and effective remedial and mitigating steps to save life. It is already observed in many countries and communities that accurate and timely testing, tracing, and tracking of the infection lead to better containment and slowing down of the spread. In this exploratory research, the early growth dynamics of infection within a population is pursued based on real data. The study posits that the early growth in a homogenous population follows an exponential pattern motivating further rigorous quantitative treatment based on a number of analytical models such as logistic model, Richard’s model, and Gompertz model– the acceleration pattern of the outbreak is ascertained from the daily inflection data, and regression analysis against population models yields dynamic growth indices which allow very accurate prediction of the successive outbreak size when calibrated continually with updated data. The performance of the various models is evaluated with the real dataset. More, the basic reproduction number of the COVID-19 virus propagation in the community is estimated based on the on-set phase dataset using multi-compartmental epidemiological model. Also, the maximum infection size, infection doubling time and the scope of the herd immunity are also inferred for COVID-19 in a population.

This case study focuses on exploring the potential of biogas as a direct substitute for conventional fossil fuels in industrial applications. Instead of being limited to its common uses as a vehicle fuel or for power generation, this research aims to investigate how biogas can be integrated into industrial processes as an advanced and sustainable energy solution. By conducting a detailed analysis of the financial implications associated with the utilization of landfill gas and gas derived from biomass, a comprehensive understanding of their practical applications in the industrial sector can be obtained. This research goes beyond a superficial examination and delves into the intricate aspects of incorporating biogas as a viable alternative fuel source. When we say that utilizing biogas is technically feasible, it means that the necessary infrastructure and technologies are available to support its integration into industrial processes. This implies that there are existing methods and systems in place that can efficiently harness and utilize biogas for various industrial applications. These technologies ensure a seamless transition from conventional fossil fuels to renewable energy sources, leading to a more sustainable and environmentally friendly industrial landscape. Moreover, the statement that utilizing biogas is economically feasible emphasizes that the financial viability of employing biogas in industrial processes is advantageous. This research explores the potential cost savings and benefits associated with substituting conventional fuels with biogas. By carefully examining the economic aspects, such as initial investments, operational costs, and potential revenue streams, a comprehensive understanding of the financial impact of adopting biogas solutions in the industrial sector can be gained. By expanding and broadening the understanding of the technical and economic feasibility of biogas integration, this research aims to provide valuable insights into the potential of advanced biogas solutions for industrial applications. Indeed, to make biogas a viable and sustainable option as a raw material, it is necessary to establish farming subsidies and financial support specifically tailored for biogas production, similar to the existing support provided for food production. These subsidies and financial incentives play a crucial role in promoting and encouraging the growth of the biogas industry. By establishing such support systems, farmers and other stakeholders in the agricultural sector can be incentivized to participate in the production of biogas. This can involve the utilization of agricultural waste, organic residues, or dedicated energy crops for biogas generation. The financial assistance can help offset the initial investment costs, provide incentives for production, and ensure the economic viability of biogas projects. Moreover, when considering large-scale landfills or situations where industrial demands for energy are relatively low, landfill gas becomes a viable and practical option. Landfill gas, which is generated by the decomposition of organic waste in landfills, can be harnessed and utilized for various industrial purposes. This not only helps in managing waste but also provides a valuable source of renewable energy. In summary, while farming subsidies and financial support are crucial for promoting biogas production, landfill gas remains a viable option for large landfills or situations with minor industrial demands. The combination of these two approaches offers a comprehensive outlook on utilizing biogas as a renewable energy source for industrial applications.

Background and Objectives: Cardiovascular events are the leading cause of morbidity and mortal-ity in hemodialysis (HD) patients. Identifying risk factors can help in the effort to reduce cardi-ovascular risk and improve life expectancy. The purpose of this study was to evaluate the ability of CHA2DS2-VASc score [risk index of stroke in atrial fibrillation (AF)] in patients with end stage kidney disease, to predict stroke, major cardiovascular events and mortality. Materials and Meth-ods: CHA2DS2-VASc and HAS-BLED (bleeding risk from use of anticoagulation in AF) scores were calculated in 237 HD patients, [99 women, median age 76 (15) years], at time they com-menced on HD. The scores’ ability to predict long term cardiovascular morbidity and mortality was estimated, both in those with and without AF. Results: CHA2DS2-VASc score was signifi-cantly increased in AF (n=69) compared to non-AF (n=168) patients, 5 (2.5) versus 4 (2), p<0.0001, respectively. Increased CHA2DS2-VASc score was associated with heart failure (p=0.007, p=0.024), stroke (p<0.0001, p<0.0001) and risk of all-cause mortality (p<0.0001, p<0.0001), in both groups, respectively. C statistics indicated that CHA2DS2-VASc score performed modest discrimination in this HD population with and without AF for heart failure, stroke, and all-cause mortality, but for cardiovascular mortality in AF group only. Conclusions: Increased CHA2DS2-VASc score at time starting on HD, can predict stroke, heart failure and all-cause mortality in HD patients in-dependent of the presence of AF. Risk of cardiovascular mortality could be predicted only on patients with AF.

This article systematically reviews the research achievements on the MnOx/TiO2 catalyst doped with transition metals or rare earth metals for the catalytic selective catalytic reduction of NH3 (SCR-NH3) reaction. The Methodi Ordinatio systematic literature analysis method was employed to rank relevant articles based on journal impact factors, publication years, and citation counts. The ranking data shows that the undoped MnOx/TiO2 catalysts exhibit a catalytic efficiency of up to approximately 90% for NOx reduction, while the doped MnOx/TiO2 catalysts with transition metals or rare earth metals can achieve a maximum reduction efficiency of 100%. Among all the doped metals, the catalyst doped with nickel demonstrates the best NOx reduction performance. The comprehensive literature research concludes that MnOx/TiO2-based SCR catalysts, especially those doped with transition metals or rare earth metals, have significant catalytic efficiency and development potential in reducing NOx emissions in SCR reactions.

: Poultry products in Zambia form an integral part of the human diet in many households, as they are cheap and easy to produce. The burden of poultry diseases has, however, remained a major challenge. Growing consumer demand for poultry products in Zambia has resulted in non-prudent antimicrobial use on farms, intending to prevent and treat poultry diseases for growth optimization and maximising profits. This cross-sectional study aimed to identify the different types of bacteria causing diseases in chickens in Lusaka and to detect the extended-spectrum-lactamase (ESBL)-encoding genes. We collected 215 samples from 91 diseased chickens at three post-mortem facilities and screened them for gram-negative bacteria. Of these samples, 103 tested positive for various clinically relevant Enterobacteriaceae, including Enterobacter (43/103, 41.7%), Escherichia coli (20/103, 19.4%), Salmonella (10/103, 9.7%), and Shigella (8/103, 7.8%). Other isolated bacteria included Yersinia, Morganella, Proteus, and Klebsiella, which accounted for 21.4%. E. coli, Enterobacter, Salmonella, and Shigella were subjected to antimicrobial susceptibility testing. The results revealed that E. coli, Enterobacter, and shigella were highly resistant to tetracycline, ampicillin, amoxicillin, and trimethoprim-sulfamethoxazole, while Salmonella showed complete susceptibility to all antibiotics. The observed resistance patterns correlated with antimicrobial usage estimated from sales data from a large-scale wholesale and retail company. Six (6/14, 42.9%) E. coli isolates tested positive for bla_CTX-M, whilst eight (8/14, 57.1%) Enterobacter samples tested positive for bla_TEM. Interestingly, four (4/6, 66.7%) of the E. coli isolates carrying bla_CTX-M-positive strains were also positive for bla_TEM. Sanger sequencing of the PCR products revealed that five (5/6,83.3%) of the abovementioned isolates possessed the bla_CTX-M-15 allele. The results suggest the presence of potentially pathogenic ESBL-producing Enterobacteriaceae in poultry, threatening public health. Keywords:. Enterobacteriaceae, bla_CTX-M, bla_TEM

Li₂TiO₃ nanopowders were synthesized by hydrothermal process using anatase TiO₂ and LiOH H₂O as raw materials. Li₂TiO₃ crystallizes in the layered monoclinic structure (space group C2/c) with average crystallite size of 34 nm. Morphology, elemental composition and local structure of products were carried out using HRTEM, FESEM, EDS, Raman and FTIR spectroscopy. Transport properties investigated by d.c. (4-probe measurements) and a.c. (complex impedance spectroscopy) show the activation energy of 0.71 and 0.65 eV, respectively. The ionic transport properties of Li⁺ ions in nanocrystalline Li₂TiO₃ characterized by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) validate the good electrochemical properties of this anode material for lithium-ion batteries.

Vanadium(IV) chalcogenide materials are of increasing interest for use in catalysis and energy conversion-related applications. Since no ternary compounds are yet known in the V–Se–Te system, we studied ternary VwSeyTe2–y (w = 1.10, 1.13; y = 0.42, 0.72) phases crystallizing in space group P3m1 (no. 164). Two single-crystal specimens with differing compositions of a solid solution were obtained using the ceramic method. All products were characterized by either single-crystal or powder X-ray diffraction. The lattice parameters increase with rising tellurium content in accordance to the larger ionic radius of the tellurium anion compared to selenium. The chemical compositions were confirmed by energy dispersive X-ray spectroscopy. Further, magnetic measurements revealed mostly antiferromagnetic properties. Simultaneous differential scanning calorimetry/thermogravimetric analyses in nitrogen atmosphere showed endothermic decomposition accompanied by the formation of VN. The results of this work can serve as a basis for the synthesis of new phases in the V–Se–Te and related vanadium chalcogenide systems.

Hypervirulent Klebsiella pneumoniae (hvKp) is a variant that has been increasingly linked to severe, life threatening infections including pyogenic liver abscess and bloodstream infections. HvKp belonging to the capsular serotypes K1 and K2 have been reported worldwide, however very scarce studies are available on the their genomics and virulence. In the current study we report four hypermucoviscous hvKp ESBL clinical strains of capsular serotype K1 and K2 isolated from pus and urine of critically ill patients in tertiary care hospitals in Oman. These strains belong to diverse sequence types (STs) namely ST-23(K1), ST-231(K2), ST-881(K2), and ST-14(K2). To study their virulence, Galleria Mellonella model and resistance to human serum killing were used. The G. mellonella model revealed that the K1/ST-23 isolate is the most virulent as 50% of the larvae died in the first day, followed by isolate K2/ST-231 for which 75% of the larvae died in the second day and isolate K2/ST-14 for which 50% of the larvae died in the second day. Resistance to human serum killing showed there was complete inhibition of bacterial growth of all four isolates by the end of the first hour and up to the third hour. For ST-23(K1), ST-231(K2), ST-881(K2), and ST-14(K2), there was a gradual decrease in the number of colonies up to the second to third hour, which indicates neutralization of bacterial cells by the serum components. However, this was followed by sudden increase of bacterial growth, indicating possible resistance of bacteria against human serum bactericidal activity. Whole genome sequencing (WGS) revealed that hvKp strains display unique genetic arrangement of k-loci. Whole genome SNP-based phylogenetic analysis revealed that these hvKp isolates are phylogenetically distinct, belonging to diverse clades and belong to different STs in comparison to global isolates. This is the first report from Oman detailing the WGS of hvKp clinical isolates and assessing their resistance and virulence genomics, which reinforce our understanding of their epidemiology and dissemination in clinical settings.

In this paper, we study the well-posedness and asymptotics of a one-dimensional thermoelastic laminated beam system either with or without structural damping, where the heat conduction is given by Fourier's law effective in the rotation angle displacements. We show that the system is well-posed by using Lumer-Philips theorem, and prove that the system is exponentially stable if and only if the wave speeds are equal, by using the perturbed energy method and Gearhart-Herbst-Prüss-Huang theorem. Furthermore, we show that the system with structural damping is polynomially stable provided that the wave speeds are not equal, by using the second-order energy method.

New ideas on the framework of Neutrosophic SuperHyperGraph for different styles of Neutrosophic SuperHyper-Wheel and Neutrosophic SuperHyper-Star are introduced. More instances and more clarifications alongside sufficient references are featured with a specific type of independency of SuperHyperVertices.

"Chemical absorption is currently the most advanced technique for capturing carbon dioxide after combustion. A fascinating approach within amine-based technology for post-combustion carbon removal is the utilization of aqueous ammonia as a solvent, leading to a method called chilled ammonia capture. This study aims to enhance the performance of chilled ammonia capture through a thermodynamic assessment, focusing on crystalline configuration.""This study explores the development of an improved second generation chilled ammonia capture process, which involves the formation of solids to enhance capturing efficiency. The simulation software ASPEN is employed to model the expanded UNIQUAC Thermodynamics hypothesis. The modeling encompasses both the conventional carbon ammonia capture process and the more advanced carbon ammonia capture system powered by a crystallizerIn this study, the energy costs associated with implementing different technologies for carbon ammonia capture in typical ultra supercritical power plants are evaluated. The introduction of solid formation in the carbon ammonia capture system has yielded promising results. The findings indicate that the energy required for the carbon ammonia capture system, which utilizes a crystallizer, is approximately 10% lower compared to the overall cost associated with the conventional carbon ammonia capture system. These results highlight the potential for significant energy savings and improved efficiency in carbon capture processes

Decarbonization of air mobility requires the decarbonization of its energy. While biofuels will play an important role, other low carbon energy carriers based on electricity are considered: battery electrification, liquid hydrogen (LH₂) or eFuel, a hydrogen-based energy carrier. Each energy carrier has its own conversion steps and losses and its own integration effects with the aircraft. These combinations lead to different energy requirements and must be understood to compare their cost and CO₂ emissions. Since they are all electricity-based, this study compares these energy carriers using the well to rotor methodology when applied to a standard Vertical Take-Off and Landing (VTOL) air mobility mission. This novel approach allows one to understand that the choice of the energy carrier dictates the propulsive system architecture, leading to integration effects with the aircraft which can significantly change the energy required, from 400 to 2665 kWh for the same mission. These deviations lead significant differences in CO₂ emissions and costs. Battery electrification is impacted by the battery manufacturing but has the lowest electricity consumption. It is an optimum solution but only until the battery weight can be lifted. In all scenarios eFuel is more efficient than LH₂. We conclude that carrying the most efficient molecule in an aircraft pays the extra energy cost spent on the ground. Finally, we found that for each of these energy carriers, it is the electricity carbon intensity and price which will dictate the cost and CO₂ emissions of an air mobility mission.

With the development of modern industry, the issue of water pollution has garnered increasing attention. Photocatalysis, as a novel green environmental technology that is resource-efficient, environmentally friendly, and highly promising, has found extensive applications in the field of organic pollutant treatment. However, common semiconductor materials exhibit relatively low photocatalytic efficiency in the visible light range or inefficient separation of photogenerated charges, resulting in their limited ability to harness solar energy effectively. Consequently, the development of new photocatalysts has become a pivotal focus in current photocatalysis research to enhance solar energy utilization. This revision provides a brief explanation of the photocatalytic mechanism of the AgIO3/CTF heterojunction photocatalyst. Due to the Localized surface plasmon resonance (LSPR) effect, Ag nanoparticles demonstrate significant absorption in the visible light region, playing a crucial role in the highly efficient photocatalytic reduction of organic pollutants.

In this paper, we investigate the stabilization of a one-dimensional thermoelastic laminated beam with structural damping, coupled to a heat equation modeling an expectedly dissipative effect through heat conduction governed by Gurtin-Pipkin thermal law. Under some assumptions on the relaxation function g, we establish the well-posedness for the problem. Furthermore, we prove the exponential stability and lack of exponential stability for the problem. To achieve our goals, we make use of the semigroup method, the perturbed energy method and Gearhart-Herbst-Prüss-Huang theorem.

In this paper, the integrated performance of a modular biomass boiler with an existing industrial Rankine steam heat and power cycle and a supplementary supercritical-CO2 (sCO2) Brayton cycle is analyzed. The aim is to leverage the high efficiency supplementary sCO2 cycle to increase net generation and energy efficiency from the existing biomass boiler. Two sCO2 heater configurations situated within the flue gas flow path are investigated, namely a single convective-dominant heater, and a dual heater configuration with a radiative and a convective heater. A quasi-steady-state 1D model was developed to simulate the integrated cycle, including detailed component characteristics for the Rankine and Brayton cycles. The model solves the mass, energy, momentum, and species balance equations. The system is analyzed for three cases: (i) the existing Rankine cycle without the sCO2 integration, (ii) with the single convective-dominant sCO2 heater configuration, and (iii) the dual sCO2 heater configuration. The results show the required rate of overfiring for the sCO2 configurations, with a 15.3% increase in fuel flowrate resulting in an additional 21.2% in net power output. The model quantifies the impact of the sCO2 heaters, with reduced heat uptakes for downstream boiler heat exchangers. Furnace water wall heat uptake increased due to overfiring, offsetting the reduced heat uptakes at downstream evaporative heat exchangers. The dual configuration has more impact on Rankine cycle operation due to the radiative sCO2 heater placement in front of the second superheater, absorbing some of the direct radiation from the furnace.

It is common knowledge that increasing CO₂ concentration plays a major role in enhancement of the greenhouse effect and contributes to global warming. The purpose of this study is to complement the conventional and established theory that increased CO₂ concentration due to human emissions causes an increase of temperature, by considering the reverse causality. Since increased temperature causes an increase in CO₂ concentration, the relationship of atmospheric CO₂ and temperature may qualify as belonging to the category of “hen-or-egg” problems, where it is not always clear which of two interrelated events is the cause and which the effect. We examine the relationship of global temperature and atmospheric carbon dioxide concentration at the monthly time step, covering the time interval 1980–2019, in which reliable instrumental measurements are available. While both causality directions exist, the results of our study support the hypothesis that the dominant direction is T → CO₂. Changes in CO₂ follow changes in T by about six months on a monthly scale, or about one year on an annual scale. We attempt to interpret this mechanism by involving biochemical reactions, as at higher temperatures soil respiration, and hence CO₂ emission, are increasing.

Natural Gas (NG) processing is a prominent industrial separation process. Among the available techniques, the innovative membrane process shows potential for efficient removal of impurities, including carbon dioxide (CO₂). This study focuses on utilizing breakthroughs in membrane separation to drive sustainable CO₂ extraction from natural gas. Through comprehensive research and analysis, we explore the effectiveness and feasibility of membrane-based systems in removing CO₂ impurities from NG, thus promoting greener and more sustainable industrial practices. Our findings underscore the transformative nature of membrane separation technology, presenting new possibilities for a more environmentally-friendly and sustainable approach to CO₂ extraction from natural gas.Natural Gas (NG) processing utilizes various techniques for impurity removal, with the membrane process emerging as a promising option for efficient carbon dioxide (CO₂) extraction. This research proposes the integration of a simple mathematical model into ASPEN HYSYS to design a membrane system for CO₂/CH₄ separation. The study also investigates parameter sensitivities by altering operating conditions, such as feed composition and pressure, as well as membrane properties, including selectivity. By analyzing these variables, we aim to optimize the performance and efficiency of the membrane system, facilitating the sustainable extraction of CO₂ from NG. The findings contribute to advancing the design and operation of membrane-based processes for CO₂ separation, paving the way for greener and more sustainable industrial practices. In addition, this study explores various configurations for optimizing the design of the membrane system, including single-stage with and without recycling as well as double-stage configurations. The investigation demonstrates that methane recovery can be enhanced through the recycling of the permeate stream and by implementing a double stage membrane system. These findings highlight the potential for improving the efficiency and performance of the membrane system, enabling higher methane recovery rates. By considering different configurations, this research contributes to the development of more effective and sustainable CO₂ extraction processes from natural gas.

Nanocomposites of TiO₂ Degussa P25 nanoparticles/activated carbon (TiO₂/AC ) were prepared at various mass ratios of (4:1), (3:2), (2:3), and (1:4) by a facile process. The effects of TiO₂/AC mass ratios on the structural, morphological, and photocatalytic properties were systematically studied in comparison with bare TiO₂ and bare AC. TiO₂ nanoparticles exhibited dominant anatase and minor rutile phases, and a crystallite size of approximately 21 nm; while AC had XRD peaks of graphite and carbon, and a crystallite size of 49 nm. The composites exhibited tight decoration of TiO₂ nanoparticles on micron-/submicron AC particles, and uniform TiO₂/AC composites were obtained as evidenced by the uniform distribution of Ti, O, and C in an EDS mapping. Moreover, Raman spectra show the typical vibration modes of anatase TiO₂ (e.g., E_1g⁽¹⁾, B_1g⁽¹⁾, E_g⁽³⁾) and carbon materials with D and G bands. The TiO₂/AC with (4:1), (3:2), and (2:3) possessed higher reaction rate constants (k) in photocatalytic degradation of methylene blue (MB) than that of either TiO₂ or AC. Among the investigated materials, TiO₂/AC = 4:1 achieved the highest photocatalytic activity with a high k of 55.2×10^-3 min^-1 and an MB removal efficiency of 96.6% after 30 min treatment under UV-Vis irradiation (120 mW/cm²). The enhanced photocatalytic activity for TiO₂/AC is due to the synergistic effect of the high adsorption capability of AC and the high photocatalytic activity of TiO₂. Furthermore, TiO₂/AC promotes the separation of photoexcited electron/hole (e^-/h⁺) pairs to reduce their recombination rate and thus enhance photocatalytic activity. The optimal TiO₂/AC composite in this study can be used for treating industrial or household wastewater with organic pollutants.

Nowadays, it is highly desired to develop highly active and humidity resistive ozone decomposition catalyst to eliminate the ozone contaminant, one of the primary pollutants in air. In this work, a series of Cu2S hollow structured materials are rapidly synthesized using different structured Cu2O templates. The Cu2S from porous Cu2O shows the highest ozone catalytic decomposition efficiency of >95% to 400 ppm ozone with a weight hourly space velocity of 480,000 cm3g-1h-1 in dry air. Importantly, the conversion still keeps >85% in a high relative humidity of 90%. The mechanism is explored by diffusive reflectance infrared spectroscopy which shows the decomposition intermediate of O22-, and the X-ray photoelectron spectroscopy reveals the dual active site of both Cu and S. All these results show the effective decomposition of ozone by Cu2S especially in harsh environments, promising for active ozone elimination.

The observed data of COVID-19 progression in Pakistan for first 50 days from the first patient been reported has shown quite an unusual trend which is in opposition to clear exponential spread pattern of any infectious disease. The data of positive cases of 50 days of disease progression has been collected from COVID-19 dashboard of Pakistan and analyzed to see the graphical trend and to forecast the behaviour of disease progression for next 30 days. Mathematical equations regarding exponential growth are used to analyse the disease progression and different possible trajectories are plotted to understand the approximate trend pattern. The possible projections estimated 20k-456k positive cases within 80 days of disease spread in Pakistan. Although, the disease progression pattern is not perfectly exponential, it is still threatening a major fraction of susceptible population and demands effective strategic planning and control.

In this paper, we provide alternative proofs to some results proposed in the article "New inequalities involving circular, inverse circular, hyperbolic, inverse hyperbolic and exponential functions" authored by Yogesh J. Bagul.

The thermoelectric generator (TEG) has much potential as a renewable energy technology that could be used in ocean thermal energy conversion (OTEC). This technique employs TEGs and heat exchangers as substitutes for the intricate elements found in conventional OTEC systems, including pressure valves, evaporators, condensers, and turbine generators. By harnessing the temperature difference between warm surface seawater and cold deep seawater, it facilitates the conversion of this thermal gradient into electrical energy. This study used computer simulations to look at and compare three different types of heat exchangers: a cavity-type heat exchanger, a heat exchanger with flat fins, and a heat exchanger with longitudinal vortex generators (LVGs). The objective was to evaluate the influence of these designs on the thermoelectric conversion performance when implemented in OTEC systems. The study's findings indicate that using heat exchanger configurations featuring flat fins, or LVGs, enhances the efficiency of thermal energy transfer from warm seawater to TEGs, resulting in a notable enhancement in the output power of TEGs. Furthermore, the efficiency of TEG thermoelectric conversion is influenced by varying seawater flow rates in relation to the performance of flat fins and LVGs. In contrast to the cavity-type heat exchanger, the utilization of a heat exchanger equipped with flat fins has been found to yield a notable enhancement in the output power of TEGs by approximately 22.92%. Furthermore, this configuration demonstrates a substantial improvement in thermoelectric conversion efficiency, exhibiting an increase of around 40.01%. These improvements are observed under certain conditions pertaining to flow rates and fin heights. Utilizing heat exchangers equipped with LVGs has been found to enhance the output power of TEGs by 13.02% and improve the overall thermoelectric conversion efficiency by 17.72%. These improvements are observed under certain conditions, including specific flow rates, LVG tilt angles, and locations.

Adherence is vital for medicine to have an effect, yet adherence is considered to be low. However, research into adherence tends to focus on quantitative analysis of performance, something which fails to perceive how people are adherent in their many different environments. As a contribution to gaining a deeper understanding, interviews were held with 30 individuals in UK, Egypt, Kazakhstan and 6 countries in sub-Saharan Africa to understand their perceptions on adherence for a range of drugs, and these were compared with an existing well-regarded list. New reasons for non-adherence were discovered, and a new viewpoint on adherence derived which considers adherence to be a single act and therefore as an individual opportunity to be adherent, permitting greater focus on the enablers and inhibitors of adherence at a point in time.

This article describes the challenges, pharmacological strategies, and recommendations for managing multidrug-resistant breast cancer in Sub-Saharan Africa (SSA). By examining the current breast cancer treatment landscape, region-specific challenges, and promising pharmacological interventions, the objective is to bring to light the insufficient research on breast cancer and its multidrug resistance in this part of the world and guide healthcare professionals, policymakers, and researchers in developing evidence-based strategies for improved breast cancer care in SSA. Breast cancer is the leading cause of cancer morbidity in SSA, necessitating continuous advancements in its management. This overview explores the evolution of breast cancer treatment, including surgery, targeted therapy, immunotherapy, radiotherapy, and chemotherapy. Despite these advancements, multidrug resistance poses a significant challenge, impacting treatment efficacy and patient outcomes.The article provides insights into various breast cancer treatment modalities, emphasizing surgery, targeted therapy, immunotherapy, radiotherapy, and chemotherapy. Each approach is discussed in detail, highlighting its significance in managing breast cancer. The effectiveness of these treatments is contingent on timely diagnosis and intervention. Multidrug resistance is examined as a critical obstacle in breast cancer treatment, elucidating its impact on treatment failure and patient outcomes. Mechanisms such as the efflux system, enhanced DNA repair, apoptosis inhibition, alterations in drug targets, and the tumor microenvironment contribute to multidrug resistance, emphasizing the need for a multifaceted understanding.The unique challenges faced in SSA regarding multidrug-resistant breast cancer are delineated. These include the lack of comprehensive data, late presentation and diagnosis, poor genomic studies, limited access to specialized care, financial constraints, inadequate infrastructure, and psychosocial support issues. Addressing these challenges is crucial for devising effective strategies. In response to multidrug resistance, the article discusses contemporary treatment strategies such as P-glycoprotein inhibitors, combined chemotherapy, and immunotherapy. Notable advancements, including the use of Tariquidar and synergistic effects of combined chemotherapy, are highlighted, presenting promising avenues for overcoming resistance.The article proposes recommendations to enhance breast cancer management in SSA, encompassing strengthening primary healthcare services, creating specialized oncology facilities and long-term monitoring and data collection. Breast cancer management in SSA is multifaceted, marked by challenges and evolving solutions. Multidrug resistance remains a significant hurdle, demanding a holistic approach. Promising advancements in pharmacological interventions offer hope, while comprehensive recommendations serve as a roadmap for progress. By implementing these strategies, SSA can substantially improve multidrug-resistant breast cancer care and overall patient well-being.

As a representative of Exponential Organizations, MI went from obscurity to the Fortune 500 in just ten years. Mi's success is inextricably linked to its outstanding business model. This paper summarizes the elements of MI's business model from four perspectives: value proposition, value creation, value delivery, and value capture, as well as its measures for developing into an exponential organization. Expecting to provide theoretical references for the transformation and upgrading of manufacturing organizations.

Aiming at the limitations of single-functionality, limited applicability, and complex designs prevalent in current metasurfaces, we propose a terahertz multifunctional and multiband tunable metasurface utilizing a VO2-metal hybrid structure. This metasurface structure comprises a top VO2-metal resonance layer, a middle polyimide dielectric layer, and a gold film reflective layer at the bottom. This metasurface exhibits multifunctionality, operating independently of polarization and incident angle. The varying conductivity states of the VO2 layers, enable the metasurface to achieve various terahertz functionalities, including single-band absorption, broadband THz absorption, and multiband perfect polarization conversion for linear (LP) and circularly polarized (CP) incident waves. Finally, we believe that the functional adaptability of the proposed metasurface expands the repertoire of options available for future terahertz device designs.

A comprehensive investigation was undertaken at Vytautas Magnus University Experimental Station, located at 54°52’50” N latitude and 23°49’41” E longitude on soil (Epieutric Endocalcaric Planosol – PLe-gln-w) since 1999, to understand the impacts of different agrotechnical measures on soil health and crop yield. Two primary factors were assessed. Factor A incorporated practices of straw removal versus straw chopping and spreading, while Factor B evaluated a spectrum of tillage techniques: conventional deep ploughing, shallow ploughing, ploughless tillage, single seedbed discing, and two no-tillage practices, one of which involved cover crops. Findings from this long-term study highlight the significant potential of specific farming systems in enhancing soil organic carbon. It has a positive effect on the release of CO2 emissions from the soil, thus promoting soil resilience and increasing plant productivity. These insights are paramount in devising sustainable agricultural strategies to counter the challenges of climate change on agroecosystems. This research showcases the profound effects of combining residue management and tillage practices, setting a novel standard for sustainable soil management of climatic uncertainties.

Discrete Double Hilbert Exponential sums along polynomials. This is preprint version (not peer reviewed) And we now check the proof of (ii) of Lemma 3.2 whether it is really true.

Air pollution has been a major environmental issue worldwide from the last few decades. It is a man-made issue that has a serious harmful impact on the environment and the health of humans. There are different sources of emission, but industrial processes and motor vehicles contribute to a chief part of air pollution. It has acute as well as chronic effects on the health of humans and affects different organs. It is thought the main environmental risk factor in the incidence and progression of several diseases such as lung cancer, asthma, Alzheimer's and Parkinson's diseases. Long-term exposure to air pollution has different toxicological impacts on humans such as respiratory and cardiovascular diseases, neuropsychiatric complications, eye irritation and skin diseases. As per the study by the World Health Organization (WHO), nitrogen oxides (NOx), carbon monoxide (CO), ozone (O₃), sulfur dioxide (SO₂), volatile organic compounds (VOCs) and heavy metals are the major air contaminants. These pollutants are different in their properties, composition and time of disintegration. The aim of this study is to review the different sources, types, impacts, challenges and mitigation of air pollution in detail.

The removal of H2S from natural gas and other gases such as biogas, refinery gases, and coal gas is required because H2S is toxic and corrosive, even in traces. Zeolites are widely used in the removal of H2S from the above-mentioned gases. In this work, we prepared an Ag-exchanged 13X molecular sieve by using different concentrations of AgNO3 to increase its adsorption properties. XRD, SEM, and BET techniques were used to characterize samples. When compared to unmodified 13X, the adsorption capacity of AgII-13X increased by about 50 times. The results of this study suggest that the silver-modified 13X molecular sieve is highly effective at extracting H2S from natural gas.

Cesium lead iodide (CsPbI3) perovskite nanocrystals (NCs) are a promising material for red light-emitting diodes (LEDs) due to their excellent color-purity and high luminous efficiency. However, small-sized CsPbI3 colloidal NCs, such as nanocubes, used in LEDs suffer from confinement effects, negatively impacting their photoluminescence quantum yield (PLQY) and overall efficiency. Here, we introduced YCl3 into the CsPbI3 perovskite, which formed anisotropic, one-dimensional (1D) nanorods. This was achieved by taking advantage of the difference in bond energies between Cl− and I− ions, which caused YCl3 to promote the anisotropic growth of CsPbI3 NCs. The YCl3-based nanorods improved the PLQY and storage stability by passivating the defects reducing the nonradiative recombination rates. When the YCl3-substituted CsPbI3 nanorods are applied to the emissive layer in LEDs, we achieve an external quantum efficiency of ~3.16% which is 1.86-fold higher than the pristine CsPbI3 NCs (1.69%) based LED. Notably, the ratio of horizontal transition dipole moments (TDMs) in the anisotropic YCl3:CsPbI3 nanorods was determined to be 75%, which is higher than the isotropically oriented TDMs in CsPbI3 nanocrystals (67%). This increased TDM ratio led to higher light outcoupling efficiency in nanorods-based LEDs. Overall, the results suggest that YCl3-substituted CsPbI3 nanorods could be promising for achieving high-performance perovskite LEDs.

In this paper we investigate the geometric structure and control of exponential families depending on additional parameters, called external parameters. These generalized exponential families emerges naturally when one applies the maximum entropy formalism to derive the equilibrium statistical mechanics framework. We study the associated statistical model, compute the Fisher metric and introduce a natural fibration of the parameter space over the external parameter space. The Fisher Riemannian metric allows to endow this fibration with an Ehresmann connection and to study the geometry and control of these statistical models. As an example, we show that horizontal lift of paths in the external parameter space corresponds to an isentropic evolution of the system. We apply the theory to the example of a ideal gas in a rotating rigid container. Most of the results are expressed in local coordinates; in the appendices we hint at possible global extensions of the theory.

In previous work (Z. Angew. Math. Phys. 68(2), 2017), Apalara considered a one dimensional thermoelastic laminated beam under Cattaneo’s law of heat conduction and proved the exponential and polynomial decay results depend on the stability number χ_T . In this paper, we continue to study the same system and show that the solution of the concerned system lacks of exponential decay result in the case χ_T ≠ 0 which solves the open problem proposed by Apalara (Z. Angew. Math. Phys. 68(2), 2017).

This study introduces a novel nanocomposite coating composed of PANI/CeO2 nanocomposite films, aimed at addressing corrosion protection needs. Analysis through FTIR spectra and XRD patterns confirms the successful formation of the nanocomposite films. Notably, the PANI/CeO2 nanocomposite films exhibit a hydrophilic nature. The bandgap energy of the PANI composite film measures at 3.74 eV, while the introduction of CeO2 NPs into the PANI matrix reduces the bandgap energy to 3.67 eV. Furthermore, the electrical conductivity of the PANI composite film is observed to be 0.40 S.cm-1, with the incorporation of CeO2 NPs leading to an increase in electrical conductivity to 1.07 S.cm-1. To evaluate its efficacy, electrochemical measurements were conducted to assess the corrosion protection performance. Results indicate a high protection efficiency of 92.25% for the PANI/CeO2 nanocomposite film.

This contribution deals with the assessment of air pollution caused by atmospheric aerosol particulate matter fraction PM10 and benzo[a]pyrene (BaP) in the urban agglomeration of Ostrava, located in the Czech Republic in Central Europe. The motivation for this research was the need to identify the sources of air pollution in the area, particularly in locations where the contribution of different sources to concentrations of pollutants of concern has not been elucidated yet. In this study, source apportionment in the vicinity of the industrial hot-spot was performed by statistically evaluating measured pollutant concentrations as a function of meteorological variables and using the Positive Matrix Factorization (PMF) receptor model. A significant methodological innovation and improvement over previous assessments was the higher monitoring resolution of benzo[a]pyrene, with samples collected at three-hour intervals instead of the standard 24-hour collection period. The key findings indicate that in the cold part of the year, secondary particles - specifically sulphates and ammonium nitrates - were responsible for the most significant portion of PM10 air pollution throughout the area of interest. The contribution of these particles ranged from one third to two fifths of the total concentration, except at the industrial site of Ostrava-Radvanice (TORE), where they accounted for approximately one fifth of the measured pollution concentration level. Emissions from individual household heating were identified as the main source of this type of pollution. With regards to benzo[a]pyrene air pollution, the study found that in the whole area of interest, except for the Ostrava-Radvanice site, it mainly originated from individual heating with coal (90%). In contrast, at the Ostrava-Radvanice site, two-thirds of the benzo[a]pyrene pollution came from the premises of Liberty Ostrava a.s., primarily from coke production, and less than one-third from local domestic heating. This study also determined the spatial extent of the occurrence of extremely high benzo[a]pyrene concentrations (above 5 ng/m3), which are estimated to affect nearly 10,000 inhabitants. The results confirm that the data from the TORE station are only representative of its immediate surroundings and are not applicable to the assessment of air quality and causes of air pollution in the whole city of Ostrava or the urban area of Ostrava-Radvanice as a whole. After years of research, these findings provide the Ministry of the Environment of the Czech Republic and the government with an accurate basis for implementing measures to address the identified pollution sources in the area of interest. The success of this study was made possible by the adoption of a more detailed sampling approach, which involved a resolution of 3 hours instead of 24 hours. This methodological improvement is a significant finding and will be useful for future source apportionment studies.

Mangrove forests store and sequester large area-specific quantities of blue carbon (C_org). Except for tundra and peatlands, mangroves store more C_org per unit area than any other ecosystem. Mean mangrove C_org stock is 738.9 Mg C_org ha⁻¹ and mean global stock is 6.17 Pg C_org, which equates to only 0.4–7% of terrestrial ecosystem C_org stocks but 17% of total tropical marine C_org stocks. Seagrasses sequester more C_org per unit area than mangroves (179.6 g C_org m⁻²·a⁻¹) but twice the C_org sequestered by mangroves globally (15 Tg C_org a⁻¹). Mangroves sequester only 4% (range 1.3–8%) of C_org sequestered by terrestrial ecosystems, indicating that mangroves are a minor contributor to global C storage and sequestration. CO₂ emissions from mangrove losses equate to 0.036 Pg CO₂-equivalents a⁻¹ based on rates of C sequestration but 0.088 Pg CO₂-equivalents a⁻¹ based on complete destruction for conversion to aquaculture and agriculture. Mangrove CO₂ emissions account for only 0.2% of total global CO₂ emissions but 18% of CO₂ emissions from the tropical coastal ocean. Despite significant data limitations, the role of mangrove ecosystems in climate change mitigation is globally insignificant but may be more significant and effective at the national and regional scale.

In recent years, machine learning (ML) techniques have emerged as an efficient and effective technology within the petroleum industry. This paper focuses on the current application of ML in enhanced oil recovery (EOR) through CO2 injection, which exhibits promising economic and environmental benefits of climate-change mitigation strategy. Our comprehensive review explores the diverse use cases of ML techniques in CO2-EOR, including aspects such as minimum miscible pressure (MMP) prediction, well location optimization, oil production and recovery factor prediction, multi-objective optimization, Pressure-Volume-Temperature (PVT) properties estimation, Water Alternating Gas (WAG) analysis, and CO2-foam EOR, from 101 reviewed papers. In this comprehensive review, we catalog relative information, including the input parameters, objectives, data sources, train/test/validate information, results, evaluation, and rating score for each area based on criteria such as data quality, ML building process, and analysis of results. We also briefly summarized the benefits and limitations of ML methods in petroleum industry applications. Our detailed and extensive study could serve as an invaluable reference for employing ML techniques in the petroleum industry. Based on the review, we found that ML techniques offer great potential in solving problems in the majority of CO2-EOR areas involving prediction and regression. With the generation of massive amounts of data in the everyday oil and gas industry, machine learning techniques can provide efficient and reliable preliminary results for the industry.

Recently, Shehata et al. [37] introduced the r+1Rs(B;C; z) matrix function and established some properties. The aim of this study established to devote and derive certain basic properties including analytic properties, recurrence matrix relations, dierential properties, new integral representations, k- Beta transform, Laplace transform, fractional k-Fourier transform, fractional integral properties, the k-Riemann{Liouville and k-Weyl fractional integral and derivative operators an extended version of r+1Rs;k matrix function. We establish its relationships with other well known special matrix functions which have some particular cases in the context of three parametric Mittag-Leer matrix function, k- Konhauser and k-Laguerre matrix polynomials. Finally, some special cases of the established formulas are also discussed.

This paper shows that the empirical distribution of cross-sectional analyst coverage in China's stock markets follows an exponential law in a given month from 2011 to 2020. The findings hold in both the emerging (Shanghai) and the developed market (Hong Kong). Moreover, the unique distribution parameter (i.e., mean) is directly related to the amount of market-wide information. Average analyst coverage exhibits a significant negative predictive power for stock-market uncertainty, highlighting the role of security analysts in diminishing the total uncertainty. The exponential law can be derived from the maximum entropy principle (MEP). When analysts, who are constrained by average ability in generating information (i.e., the first-order moment), strive to maximize the amount of market-wide information, this objective yields the exponential distribution. Contrary to the conventional wisdom that security analysts specialize in the generation of firm-specific information, empirical findings suggest that analysts primarily produce market-wide information for 25 countries. Nevertheless, it remains unclear why cross-sectional analyst coverage reflects market-wide information, this paper provides an entropy-based explanation.

This paper introduces the exponential time differencing (ETD) technique as a numerical method to solve efficiently American vulnerable options pricing. We address several challenges, including removing cross-derivative terms through appropriate transformations, treating early-exercise opportunities using the penalty method, and substituting fixed boundary conditions with corresponding one-sided finite differences. The proposed method is shown to be both accurate and efficient through numerical experiments, which also compare the results with existing methods and analyse the numerical stability and convergence rate.

This paper presents a new discrete counterpart of the mixture exponential distribution by utilizing the survival discretization method. The moment-generating function and associated moment measures are discussed. The distribution’s hazard rate function can assume increasing or decreasing forms, making it adaptable for diverse fields requiring count data modelling. The paper explores four distinct parameter estimation methods and assesses their performance through Monte Carlo simulations. The applicability of this distribution extends to time series analysis, particularly within the framework of the first-order integer-valued autoregressive process. Additionally, the paper explores quality control applications, addressing serial dependence challenges in count data encountered in production and market management. The performance of two distinct control charts, the cumulative sum chart and the exponentially weighted moving average chart, is evaluated for their effectiveness in detecting shifts in the process means under various models. A bivariate Markov chain approach is used to estimate the average run lengths of these charts, offering valuable insights for implementation. Design recommendations for achieving robustness in-control chart applications are provided. The effectiveness of the proposed models and charts is illustrated using a real data, demonstrating their practical superiority.

Generally, stochastic functional differential equations (SFDEs) pose a challenge as they often lack explicit exact solutions. Consequently, it becomes necessary to seek certain favorable conditions under which numerical solutions can converge towards the exact solutions. This article aims to delve into the convergence analysis of solutions for stochastic functional differential equations by employing the framework of G-Brownian motion. To establish the goal, we find a set of useful monotone type conditions and work within the space Cr((−∞,0];Rn). The investigation conducted in this article confirms the mean square boundedness of solutions. Furthermore, this study enables us to compute both LG2 and exponential estimates.

Proposed in 1889 by Svante Arrhenius, the Arrhenius equation is an important result in physical chemistry which aims to find the relationship between temperature and reaction rates. It is also an essential equation for analytic chemistry which helps to determine the energy barrier for a given reaction. In this article, we will go through a detailed derivation of the exponential factor in the Arrhenius Equation based on the Boltzmann distribution of particle energy probability. Then, we will attempt to model the pre-exponential factor in accordance with the principles of collision theory for bi-molecular reaction with gaseous reactants. Understanding the basic principles of chemical reaction provides valuable tools to analyze complex reaction mechanisms in the perspective of optimizing existing industrial processes.

BackgroundThe novel virus COVID-19, also known as SARS-CoV‑2, is currently rapidly spreading around the globe and pushing healthcare systems to the limits of their capacity. One of the functions of predictive models is to timely act for epidemic preparedness including hospital preparedness. In Egypt, like many other countries in the world, the epidemic situation and forecasting have not yet sufficiently studied. ObjectiveThe study was carried out to develop a short-term forecast scenario for the COVID-19 epidemic situation in Egypt and predict the hospital needs to accommodate the growing number of cases.MethodsSecondary data from the COVID-2019 daily reports and the report issued 8^th of April by the Egyptian Ministry of Health and Population were used. Due to the daily changing level of knowledge and data, the article reflects the status up to 18 April 2020. The prediction was based on the exponential growth rate model. For the depiction of the situation, the full length of the epidemic timeline was analyzed (from February 14^th till April 18^th). The growth rates and their rates of decline during the period from the 22^nd of March till the 18^th of April were calculated and extrapolated in the coming 7 weeks. The predicted hospital needs were assessed against the announced allocated resources.ResultsThe epidemic curve in Egypt is on the ascending arm as of April, 18. The active cases showed exponential growth from the start of the epidemic till April, 18. At the end of this period time, the recovery rate was 23.12% and the case fatality rate (CFR) was7.39. The case fatality rate median level during the last four weeks was 6.64. The active cases are expected to reach more than 20,000 by late May then starts to decline. The allocated regular hospital beds are predicted to show shortage by the time of the release of the paper. The intensive care units (ICU) beds and ventilators are predicted to show insufficiency on May 6.Conclusions: The COVID-19 epidemic in Egypt is expected to continue on the rise for the next few weeks and expected to start to decline late in May, 2020. Our estimates should be useful in preparedness planning. Serious actions should be taken to provide ICU beds and ventilators enough for the predicted number of cases that would need them, not later than the end of April. Mitigation actions have to continue for the coming 6 weeks or until the epidemic situation is more clearly seen.

In this paper, we study the global existence and exponential decay for a dynamic contact problem between a Timoshenko beam with second sound and two rigid obstacles, of which the heat flux is given by Cattaneo's law instead of the usual Fourier's law. The main difficulties arise from the irregular boundary terms, from the low regularity of the weak solution and from the weaker dissipative effects of heat conduction induced by Cattaneo's law. By considering related penalized problems, proving some a priori estimates and passing to the limit, we prove the global existence of the solutions. By considering the approximate framework, constructing some new functionals and applying the perturbed energy method, we obtain the exponential decay result for the approximate solution, and then prove the exponential decay rate to the original problem by utilizing the weak lower semicontinuity arguments.

The study evaluates the toxic effects of acute and sub-acute oral administration of methanol extracts of Geophila obvallata in rats. During acute study, a dose of 1600, 2900 and 5000 mg/kg bw of extract was orally administered to rats. Rats were observed for signs of toxicity for two weeks. During sub-acute study (28 days), the extract, at doses of 100, 500 and 1000 mg/kg bw were administered orally to rats while control rats were given only tap water. At the end of the study, samples were collected for analyses. In acute toxicity studies, the extract did not induce death after single dose administration. Hence, the LD50 was estimated above 5000mg/kg. The results of sub-acute toxicity study show that no significant changes were observed in the body weights, organ weights, kidney function and organ histology. There were significant changes in hematology and biochemical indices investigated at elevated doses of 500 and 1000 mg/kg bw compared to the control. GOE may be considered non-toxic at a dose of 100 mg/kg with promising applications in drug therapy.

Pollution of sub-surface water reservoirs mainly rivers and streams through contaminated water point sources (CWPS) was studied. The objective was to formulate a discrete time delay mathematical model which describes the dynamics of reservoir pollution using mixing-problem processes that involve single species contaminants such as nitrates, phosphorous and detergents. The concentration of pollutants was expressed as a function of the inflow and outflow rates using the principle for the conservation of mass. Systems of ODEs generated from principles of mixing problems were refined into a system of DDEs so that the concentration of pollutant leaving the reservoir at time would be determined at some earlier instant, for the delay. The formulated model is a mathematical discrete time delay model which would be used to describe the dynamics of sub-surface water reservoir pollution. The results from the validation of the model were analyzed to determine how time delays in the mixing processes affect the rate of particle movement in water reservoirs.

In sub-Saharan Africa (SSA), cervical cancer is a critical public health issue; it is the second leading cause of cancer among women and the leading cause of female cancer deaths. Incidence and mortality rates are substantially higher than in high-income countries with population-based screening programs, yet implementing screening programs in SSA has so far proven to be challenging due to financial, logistical and sociocultural factors. Human Papillomavirus (HPV) vaccination is an effective approach for primary prevention of cervical cancer and presents an opportunity to reduce the burden from cervical cancer in SSA. With a number of SSA countries now eligible for GAVI support for vaccine introduction, it is timely to consider the factors that impede and facilitate implementation of vaccine programs in SSA. This article reviews the epidemiological and clinical features of cervical cancer in SSA and describes the current status of HPV vaccine implementation in SSA countries. The review considers the challenges that will need to be addressed, and effective approaches to the design and implementation of HPV vaccination programs, using Rwanda as a case study. The review aims to provide suggestions and guidance to those involved in the development and implementation of HPV vaccination programs in SSA.

Abstract: In this study the semi-distributed model SWAT (Soil and Water Assessment Tool), were applied to evaluate stream flow of Didessa sub basin, which is one of the major sub basins in Abay river basin of Ethiopia. The study evaluated the quality of observed meteorological and hydrological data, established SWAT hydrological model, identified the most sensitive parameters, evaluated the best distribution for flow and developed peak flow for major tributary in the sub basin. The result indicated that the SWAT model developed for the sub basin evaluated at multi hydro-gauging stations and its performance certain with the statistical measures, coefficient about determination (R2) and also Nash coefficient (NS) with values ranging 0.62 to 0.8 and 0.6 to 0.8 respectively at daily time scale. The values of R2 and NS increases at monthly time scale and found ranging 0.75 to 0.92 and 0.71 to 0.91 respectively. Sensitivity analysis is performed to identify parameters those were most sensitive for the sub basin. CN2, GWQMN, CH_K, ALPHA_BNK and LAT_TIME are the most sensitive parameters in the sub basin. Finally, the peak flow for 2-10000 returns periods were determined after the best probability distribution is identified in EasyFit computer program.

A reduction of melatonin function contributes to the acceleration of Alzheimer's disease (AD), and understanding molecular processes of melatonin-related signaling is critical for intervention of AD progression. Recently, we synthesized and tested a series of melatonin derivates with donepezil fragments in silico and in vitro. In this study, one of the most potent compounds, 3c, was studied in an in vivo rat model of pinealectomy (pin) and subsequent icvAβ1-42 infusion. Melatonin was used as a referent drug. The treatment with melatonin and 3c (10 mg/kg, i.p. for 14 days) exerted a beneficial effect on memory decline and concomitant rise of Aβ1-42 and pTAU in the hippocampus in the pin + icvAβ1-42 rats. Melatonin supplementation facilitated the non-amyloidogenic signaling via a non-receptor (histone deacetylase sirtuin 1, SIRT1) and receptor-related signaling (MT/ERK/CREB). The hybrid 3c derivate up-regulated the MT1A and MT2B receptors, pERK and pCREB. Our findings strongly support the hypothesis that melatonin-related derivates may become a promising drug candidate in AD therapy.

This research investigates the implementation of complex exponential-based neurons in FPGA, which can pave the way for implementing bio-inspired spiking neural networks to compensate for the existing computational constraints in conventional artificial neural networks. The increasing use of extensive neural networks and the complexity of models in handling big data lead to higher power consumption and delays. Hence, finding solutions to reduce computational complexity is crucial for addressing power consumption challenges. The complex exponential form effectively encodes oscillating features like frequency, amplitude, and phase shift, streamlining the demanding calculations typical of conventional artificial neurons through levering simple phase addition of complex exponential functions. The article implements such a two-neuron and a multi-neuron neural model using Xilinx system generator and Vivado design suite, employing 8-bit, 16-bit, and 32-bit fixed-point data format representations. The study evaluates the accuracy of the proposed neuron model across different FPGA implementations while also providing a detailed analysis of operating frequency, power consumption, and resource usage for the hardware implementations. BRAM-based Vivado designs outperformed Simulink regarding speed, power, and resource efficiency. Specifically, the Vivado BRAM-based approach supported up to 128 neurons, showcasing optimal LUT and FF resource utilization. Such outcomes accommodate choosing the optimal design procedure for implementing spiking neural networks on FPGAs.

Kim-Kim (Russ. J. Math. Phys. 2017, 24, 241-248) defined the degenerate Laplace transform and investigated some of their certain properties. Motivated by this study, in this paper, we introduce the degenerate Sumudu transform and establish some properties and relations. We derive degenerate Sumudu transforms of power functions, degenerate sine, degenerate cosine, degenerate hyperbolic sine, degenerate hyperbolic cosine, degenerate exponential function, and function derivatives. We also acquire a relationship between degenerate Sumudu transform and degenerate gamma function. Moreover, we investigate a scale preserving theorem for the degenerate Sumudu transform. Furthermore, we show that the degenerate Sumudu transform is the theoretical dual transform to the degenerate Laplace transform.

The aim of this study is to investigate, by means of experimental measurements and full-wave simulations, the dominant factors for the very high-resolution (VHR) radar image speckles from exponential correlated rough surfaces. A Ka-band radar system was used to collect the return signal from such a surface sample fabricated by 3D printing, and that signal was further processed into images at different resolution scales, where the image samples were obtained by horizontally turning around the surface sample. To cross-validate the results and to further discuss the VHR speckle properties, full wave simulations by full 3D Finite Difference Time Domain (FDTD) method were conducted with 1600 realizations for the speckle analysis. At the considered very high resolution, speckle statistics show divergence from the fully developed Rayleigh distribution. The factors that impact on the high-resolution speckle properties from exponential correlated rough surface, are analyzed in views of the equivalent number of scatterers theory and scattering scales, respectively. From the data results and extended discussions, it is evident that both of the above factors matter for VHR speckle of backscattering, from the exponential correlated rough surface as a good representative for the ground surface.

In this paper, we study the well-posedness and asymptotic behaviour of solutions to a laminated beam in thermoelasticity of type III. We first give the well-posedness of the system by using the semigroup method. Then, we show that the system is exponentially stable under the assumption of equal wave speeds. Furthermore, it is proved that the system is lack of exponential stability for case of nonequal wave speeds. In this regard, a polynomial stability result is proved.

The asymmetric bimodal exponential power (ABEP) distribution is an extension of the generalized gamma distribution to the real line via adding two parameters which fit the shape of peakedness in bimodality on real line. The special values of peakedness parameters of the distribution are combination of half Laplace and half normal distributions on real line. The distribution has two parameters fitting the height of bimodality, so capacity of bimodality is enhanced by using these parameters. Adding a skewness parameter is considered to model asymmetry in data. The location-scale form of this distribution is proposed. The Fisher information matrix of these parameters in ABEP is obtained explicitly. Properties of ABEP are examined. Real data examples are given to illustrate the modelling capacity of ABEP. The replicated artificial data from maximum likelihood estimates of parameters of ABEP and distributions having an algorithm for artificial data generation procedure are provided to test the similarity with real data.

The global energy landscape is undergoing a transformative shift, and the potential of LNG as a major energy source is a topic of intense debate. In order to meet the growing demand for sustainable energy supply, it is crucial to maximize the efficiency and environmental friendliness of the LNG supply chain. This research aims to leverage computational modeling and optimization techniques to enhance the production units involved in LNG production. By harnessing the power of advanced algorithms and simulations, we can identify and implement innovative strategies that minimize energy consumption, reduce greenhouse gas emissions, and enhance the overall sustainability of LNG. Through this study, we seek to uncover novel approaches to address the challenges faced by the LNG industry, including improving operational efficiency, optimizing liquefaction processes, and enhancing the utilization of natural resources. By integrating cutting-edge computational tools and considering environmental factors, we aspire to pave the way for a more sustainable and environmentally friendly future powered by LNG. By exploring the immense potential of computational modeling and optimization, we strive to contribute to the ongoing efforts in advancing energy sustainability and shaping the future of LNG as a crucial global energy source."In this paper, our focus is on simulating and optimizing the process of converting natural gas to LNG. Our goal is to achieve the minimum energy consumption per ton of LNG produced. Through our research, we have identified that utilizing a three-stage exchanger is the most effective approach for minimizing energy consumption in an LNG industrial production unit. Moreover, we have discovered that the outlet pressure from the compressor and the type of refrigerant in the cooling system play significant roles in determining the rate of energy conservation. By carefully considering these factors and optimizing their settings, we can further enhance the overall energy efficiency of the LNG production process. Our research aims to provide valuable insights and guidance to industry professionals and decision-makers in the LNG sector. By implementing the findings of this study, we can contribute to the sustainable development and utilization of LNG as a cleaner and more environmentally energy source. Friendly It's great to see the optimized parameters for the refrigerants and pressure settings in the liquefaction and subcooling cycles. With the mass fraction of 0.89 for methane and 0.14 for ethane in the liquefaction cycle, and 0.59 for methane and 0.3 for nitrogen in the composition for achieving energy efficiency in the LNG production subcooling cycle, The optimized outlet pressure of 650 kPa for the compressors in the liquefaction cycle and 1800 kPa for the subcooling cycle furtherr ccontribute to minimizing energy consumption. Based on your findings, the amount of consumed energy at 14.81 kW per ton of produced LNG highlights the success of the optimization efforts. Reducing the energy consumption per ton of LNG produced is a significant accomplishment towards achieving energy sustainability and environmental friendliness in the LNG industry. These results demonstrate the importance of computational modeling and optimization in identifying the best parameters for eenhancing energy efficiency in LNG production. By implementing these optimized settings, we can work towards a more sustainable future with reduced energy consumption and lower environmental impact

(1) Background: Respiratory infections are a major public health problem worldwide, with potentially serious consequences. Indeed, these infections remain one of the main causes of morbidity and mortality in children under 5 years old in developing countries. Etiological information on respiratory infections is crucial for prevention and case management strategies. This systematic review aims to describe the etiology of respiratory infections reported in studies carried out in sub-Saharan African countries; (2) Methods: Using PubMed, HINARI and Google scholar search engines, a systematic search was carried out to identify published articles on the etiology of viral and/or bacterial respiratory infections in sub-Saharan Africa in patients of all ages. We have only considered data from sub-Saharan Africa. Papers published from 2010 to 2021, in English or French have been included in this review; (3) Results: After reviewing 115 articles reporting studies carried out in the African continent, only 32 articles were selected of which, studies were conducted in 15 sub-Saharan African countries, including 6/32 (18.75%) in Cameroon. Twenty (62.5%) were cross-sectional studies, and twenty-four (75%) were hospital-based investigations. In these studies, RT-PCR and culture methods were respectively used for viruses and bacteria investigations. Respiratory syncytial virus was the most frequently identified, with prevalence ranging from 0.6% to 59%, followed by rhinovirus (9.3% -73%), influenza virus (flu) A/B (0.9%-69.1%), and human adenovirus (0.9% - 30.8%). Streptococcus pneumoniae (14.2% - 96%), followed by Haemophilus influenzae type b (2.5% - 54%), and Klebsiella pneumoniae (1.4% - 49.9%) were the most frequently detected bacteria; (4) Conclusions: This review has reported that many pathogens, mainly viruses, are associated with acute respiratory infections in sub-Saharan Africa in both children and adults. Unfortunately, the limited geographical distribution of data across sub-Saharan Africa does not allow most of countries to develop an effective strategy for the prevention and treatment of respiratory infections.

Hemoglobin based oxygen carriers (HBOC) as blood substitutes are one of the great hopes of modern transfusion and emergency medicine. After the major safety-relevant challenges of the last decades seem to be largely overcome, current developments have in common that they are affected by degradation and excretion at an early stage in test organisms. Several possible mechanisms that may be responsible for this are discussed in the literature. One of them is CD163, the receptor of the complex of haptoglobin (Hp) and hemoglobin (Hb). The receptor has been shown in various studies to have an affinity for Hb in the absence of Hp. Thus, it seems reasonable that CD163 could possibly also bind Hb within HBOC and cause phagocytosis of the particles. In this work we investigated the role of CD163 for the uptake of our HbMP (hemoglobin sub-micron particles) in monocytes and additionally screened for alternative ways of particle recognition by monocytes. In our experiments, blockade of CD163 by specific monoclonal antibody proved to partly inhibit HbMP-uptake by monocytes. It appears however, that several other phagocytosis pathways for HbMP might exist, independent of CD163 and also Hb.

Though there has been a decline in the number of new cases of viral hepatitis-induced acute liver failure in Europe and the United States of America, viral hepatitis still remains the leading cause of acute liver failure in Asia-Pacific and South America. However, the epidemiology of viral-hepatitis-induced acute liver failure in sub-Saharan Africa-the world epicenter of viral hepatitis-is unclear. The aim of this review was to collate data on the incidence, prevalence, specific etiologic agents, features/diagnosis, treatment and prognosis of viral-induced acute liver failure in sub-Saharan Africa. One hundred and forty-seven cases of viral-induced acute liver failure were recorded in 11 studies conducted in six countries between 1981-2020. Etiological agents were: Hepatitis viruses A, B, C, and E, as well as Adenovirus, Enterovirus, Parvovirus, Herpes Simplex Virus (HSV) and EBV. HAV was the most frequent in paediatric subjects: (11/16) 69% and (19/30) 63%. HBV was the only etiological agent in the study that only included adults. HEV (genotype 2 in one study) contracted amidst hepatitis E outbreaks was the most commonly reported cause of ALF in pregnant women. Treatment was mainly supportive, and liver transplantation reported only in South Africa. Where reported, case fatality rates were high. In conclusion, viral-hepatitis induced acute liver failure is largely understudied in sub-Saharan Africa. The few available data are consistent with literature from the other parts of the world regarding aetiologic agents. Liver transplantation is not available in most sub-Saharan African countries, and short-term case fatality rates of individuals with acute liver failure could outstrip current rates from the other world regions.

Studies shows that, normal to high serum 25(OH)D status appears to have some beneficial influence on the incidence and severity of some, though not all, types of infections. However, studies with vitamin D supplementation on young children produced conflicting results with respect to the level of vitamin D deficiency among common medical illnesses among children. Method: A systematic review of literatures from PubMed, CINAHL, Web of science, global health and Google scholar electronic databases was conducted to assess the pooled prevalence of vitamin D deficiency among healthy and sick children in sub-Saharan Africa. The data was extracted by two authors independently using standard data extraction format and STATA Version 14 was used for analysis. The heterogeneity of the studies was assessed by using I2 test. A random-effects model was used to estimate the pooled prevalence among both healthy and sick children. Presence of publication bias was checked using Funnel plot and Egger's test. Result: A total of 1212 articles were identified by the total search of utilized data bases of which 13 papers fulfilled the inclusion criteria and accessible with full document. The meta-analysis revealed that the pooled prevalence of vitamin D deficiency among healthy children in this study was 50.06% (95%CI 33.46%, 66.67%) with mean serum vitamin D level of 41.06 nm/L (CI range from 23.82nm/L to 58.31nm/L). The pooled prevalence among the sick children was 39.36% (CI 20.57%, 57.96%) with 66.96nm/L (95% CI 54.81nm/L, 79.11nm/L) mean concentration of vitamin D. Comparing the two level of the pooled prevalence, the prevalence among the healthy children was significantly higher compared to those who have common medical illnesses and the pooled mean concentration among the sick was much higher than the mean concentration among healthy children. Conclusion: The level of pooled prevalence among both group of population was significantly of public health concern and the prevalence among the healthy children was much higher among the sick children implying the need for reconsideration of available recommendations for the prevention of vitamin D deficiency

To bring to the fore the aim of this research, effects of fluctuating temperature, was measured against food and nutrition security in the region using food production index, and undernourished population growth rate as proxies; controlled over share of arable land, irrigation, population and labour share for agriculture. Dynamic panel of generalized method of moments (GMM) was adopted, the period 2000 to 2016 were considered and 29 countries in sub-Sahara Africa were selected within the empirical framework of global water balance as mentioned by Rai and Singh (2012). Findings from the study reveals that the short run effect of temperature increase in degrees pose at least -3.1% negative and significant impact effects on the food production while the long run elasticity hits -7.5% and the controlled effect on arable land revealed a positive impact on the food production to the tune of 3.9%. Contrarily, arable land expansion reduces the under nourished population by -8.55%. Population increase on the other hand increases undernourished population in the region to the tune of 11.95%. The study therefore recommended expansion in the arable land and encourages population control policy in order to negate the undesired effects of temperature on food and nutritional security.

The novel COVID-19 pandemic prompted an unprecedented Institutional reaction to aggregate existing capacity from silos of research laboratories to establish a multidisciplinary research laboratory for COVID19 testing. In less than two weeks, resources were mobilized from the community to strengthen public health response and epidemic control. Such strengthening of institutional research capacity to support public health response contributes to a natural knowledge transfer, facilitates collaboration, and generates new frontiers for knowledge production that should ultimately lead to professional development and retention of skilled human resources. This report describes the pre-established mechanisms and involvement of the authors that made it possible to set-up a multidisciplinary laboratory in a remarkably short period of time. We also discuss the opportunities and sustainability of multidisciplinary laboratory research post-COVID19. Existing institutional capacity can be repurposed to establish multidisciplinary research laboratories to support the strengthening of basic and clinical translational research capacity in resource limited settings and impact on public health and scientific knowledge for socioeconomic development.

This work presents noble composites of AAILs@MCM-48 by functionalizing ordered mesopo-rous silicon MCM-48 with two amino acid-based ionic liquids (AAILs) ([Emim][Gly] and [Em-im][Ala]) to improve carbon capture and selectivity of CO2 over nitrogen. Thermogravimetric and XRD analyses of the composites show that the MCM-48 support's thermal and structural in-tegrity was preserved after the AAILs were encapsulated. An N2 adsorption-desorption study at 77 K also confirms AAIL encapsulation in the porous support. Under post-combustion flue gas conditions, both [Emim][Gly]@MCM-48 and [Emim][Ala]@MCM-48 demonstrated improved CO2 adsorption in comparison to unmodified MCM-48, with a CO2 partial pressure of around 0.15 bar. In terms of maximal CO₂ uptake, the 40wt%-[Emim][Gly] composite outperformed the others at 303K, with values of 0.74 and 0.82 mmol g-1, respectively, at 0.1 and 0.2 bar. These numbers show a 10x and 5x increase, respectively, as compared to the pure MCM-48 under iden-tical conditions. In addition, the selectivity of the composites was improved significantly, at 0.1 bar, the selectivity of composites containing 40wt% [Emim][Ala] increased to 17, compared to 2 for pristine MCM-48.

The affinity constant, also known as the equilibrium constant, binding constant, equilibrium association constant, or the reciprocal value, the equilibrium dissociation constant (K_d), can be considered as one of the most important characteristics for any antibody-antigen pair. Many methods based on different technologies have been proposed and used to determine this value. However, since a very large number of publications and commercial datasheets do not include this information, significant obstacles in performing such measurements seem to exist. In other cases where such data are reported, the results have often proved to be unreliable. This situation may indicate that most of the technologies available today require a high level of expertise that does not seem to be available in many laboratories. In this paper, we present a simple approach based on standard immunoassay technology that is easy and quick to perform. It relies on the effect that the molar IC₅₀ approaches the K_d value in the case of infinitely small concentrations of the reagent concentrations. A two-dimensional dilution of the reagents leads to an asymptotic convergence to K_d. The approach has some similarity to the well-known checkerboard titration used for the optimization of immunoassays. A well-known antibody against the FLAG peptide, clone M2, was used as a model system and the results were compared with other methods. This approach could be used in any case where a competitive assay is available or can be developed. The determination of an affinity constant should belong to the crucial parameters in any quality control of antibody-related products and assays and should be mandatory in papers using immunochemical protocols.

Information is physically measurable as a selection from a set of possibilities, the domain of information. This defines the term "information". The domain of the information must be known together reproducibly beforehand. As a practical consequence, digital information exchange can be made globally efficient, interoperable and searchable to a large extent by online definition of application-optimized domains of information. There are even more far-reaching consequences for physics. The purpose of this article is to present prerequisites and possibilities for a physical approach that is consistent with the precise definition of information. This concerns not only the discretization of the sets of possible experimental results, but also the order of their definition along time. The access to or comparison with the domain of information is the more frequent, the earlier it was defined. The geometrical appearance of our space is apparently a delayed statistical consequence of a very frequent connection with the common primary domain of information.

It is well established the complex exponential and logarithm are multivalued functions, both failing to maintain most identities originally valid over the positive integers domain. Moreover the general case of complex logarithm, with a complex base, is hardly mentionned in mathematic litterature. We study the exponentiation and logarithm as binary operations where all operands are complex. In a redefined complex number system using an extension of the C field, hereafter named E, we prove both operations always produce single value results and maintain the validity of identities such as log_u (w v) = log_u (w) + log_u (v) where u, v, w in E. There is a cost as some algebraic properties of the addition and subtraction will be diminished, though remaining valid to a certain extent. In order to handle formulas in a C and E dual number system, we introduce the notion of set precision and set truncation. We show complex numbers as defined in C are insufficiently precise to grasp all subtleties of some complex operations, as a result multivaluation, identity failures and, in specific cases, wrong results are obtained when computing exclusively in C. A geometric representation of the new complex number system is proposed, in which the complex plane appears as an orthogonal projection, and where the complex logarithm and exponentiation can be simply represented. Finally we attempt an algebraic formalization of E.

In this note we study the computation of the minimum polynomial of a matrix $A$ and how we can use it for the computation of the matrix $A^n$. We also describe the form of the elements of the matrix $A^{-n}$ and we will see that it is closely related with the computation of the Drazin generalized inverse of $A$. Next we study the computation of the exponential matrix and finally we give a simple proof of the Leverrier - Faddeev algorithm for the computation of the characteristic polynomial.

The goal of clustering is to identify common structures in a data set by forming groups of homogeneous objects. The observed characteristics of many economic time series motivated the development of classes of distributions that can accommodate properties such as heavy tails and skewness. Thanks to its flexibility, the Skewed Exponential Power Distribution (also called Skewed Generalized Error Distribution) ensures a unified and general framework for clustering possibly skewed and heavy tailed time series. This paper develops a clustering procedure of model-based type, assuming that the time series are generated by the same underlying probability distribution but with different parameters. Moreover, we propose to optimally combine the estimated parameters to form the clusters with an entropy weighing $k$-means approach. The usefulness of the proposal is showed by means of application to financial time series, demonstrating also how the obtained clusters can be used to form portfolio of stocks.

This paper considers estimating the ratio of two distributions with different parameters and common supports. We consider a Bayesian approach based on the Log--Huber loss function which is resistant to outliers and useful to find robust M-estimators. We propose two different types of Bayesian density ratio estimators and compare their performance in terms of Bayesian risk function with themselves as well as the usual plug-in density ratio estimators. Some applications such as classification and divergence function estimation are addressed.

This paper includes some new investigations and results for post quantum calculus, denoted by (p,q)-calculus. A chain rule for (p,q)-derivative is developed. Also, a new (p,q)-analogue of the exponential function is introduced and some its properties including the addition property for (p,q)-exponential functions are investigated. Several useful results involving (p,q)-binomial coefficients and (p,q)-antiderivative are discovered. At the final part of this paper, (p,q)-analogue of some elementary functions including trigonometric functions and hyperbolic functions are considered and some properties and relations among them are analyzed extensively.

This essay critically discusses the integration of queer theory into human geography while emphasizing its ties to the principles of traditional geography. The need for a separate sub-discipline called queer geography is questioned. At the same time, legitimate concerns about possible departures from the fundamental goals of geography and the risks of anachronistic interpretations in applying modern concepts to historical landscapes are acknowledged. In this discourse, we strongly advocate for values such as freedom of speech, freedom of expression, and international human rights. It is important to emphasize that it is not the intent of this essay to denigrate campaigns for feminism or equality or to disparage the scholarship that emerges from the application of queer theory. On the contrary, we recognize the emergence of gender theories out of a need to advance social justice approaches. We believe that traditional human geography, itself, is capable of comprehensively examining space, time, and the complexity of human experience and offering workable solutions within its established framework. We therefore believe that the inclusion of queer theory can be harmoniously integrated into the contours of human geography, eliminating the need for a separate sub-discipline while preserving the integrity and purpose of the discipline.

: Urinary schistosomiasis caused by the parasite Schistosoma haematobium is the most common form of schistosomiasis. This parasite has a high potential for genetic exchange within parasite populations giving rise to the genetic diversity that is important for its survival. Genetic differ-ences may lead to some parasite strains being more immunogenic which may have a negative impact on management and control of schistosomiasis. Therefore, understanding these genetic differences in the parasite may lead to better management of the disease. A literature search was done on PubMed, African Journals online and Google scholar using predefined search terms such as urinary schistosomiasis, S. haematobium, genetic diversity in sub-Saharan Africa in com-bination with Boolean operators (AND, OR). The search included studies published from 2000-2020 that emphasised on genetic diversity of Schistosoma haematobium in sub-Saharan Africa. Sixteen studies from 18 sub-Saharan African countries that met the inclusion criteria were se-lected. Most studies conducted in these countries showed a high genetic diversity of Schistosoma haematobium studies with microsatellite markers being the most commonly used method for ge-netic diversity determination. Fisher’s exact test showed that the distribution of genetic diversity in sub-Saharan African regions was not statistically significant (p=0.768). The highest number of studies on genetic diversity of Schistosoma haematobium were conducted in West Africa with Ni-geria and Zimbabwe in Southern Africa conducting the most studies, 4/36 (11%) each. Results obtained show the need for continued monitoring of genetic variations in Schistosoma haemato-bium in sub- Saharan Africa. This will aid in understanding the epidemiology of disease, ad-vancing novel treatment and vaccine strategies.

Mobile health devices are emerging applications that could help deliver point-of-care (POC) diagnosis, particularly in settings with limited laboratory infrastructure, such as sub-Saharan Africa (SSA). The advent of coronavirus has resulted in an increased deployment and use of mHealth-linked POC diagnostics in SSA. We performed a systematic review and meta-analysis to evaluate the accuracy of mobile-linked point-of-care diagnostics in SSA. Our systematic review and meta-analysis were guided by the Preferred Reporting Items requirements for Systematic Reviews and Meta-Analysis (PRISMA). We exhaustively searched PubMed, Science Direct, Google Scholar, MEDLINE, and CINAHL with full-text via EBSCOhost databases from mHealth inception to March 2021. The statistical analyses were conducted using OpenMeta-Analyst software. All 11 included studies were considered for the meta-analysis. The included studies focused on malaria infections, Schistosoma haematobium, Schistosoma mansoni, soil-transmitted helminths, and trichuris trichiura. The pooled summary of sensitivity and specificity estimates were moderate compared to the gold reference standard. The overall pooled estimates of sensitivity, specificity, positive likelihood ratio, negative likelihood ratio and diagnostic odds ratio of mobile-linked POC diagnostic devices were as follows: 0.499 (95% CI: 0.458-0.541); 0.535 (95% CI: 0.401-0.663); 0.952 (95% CI: 0.60-1.324); 1.381 (95% CI: 0.391-4.879); and 0.944 (95% CI: 0.579-1.538), respectively. Evidence shows that mobile-linked POC diagnostics' diagnostic accuracy is presently moderate in detecting infections in sub-Saharan Africa. Future research is recommended to evaluate mHealth devices' diagnostics with excellent sensitivities and specificities in diagnosing diseases in this setting.

United Nations Framework Conventions on Climate Change (UNFCC) conventions in their conference of parties (COPs) has continuously considered and agreed reducing emission level in order to minimize the impact of global climate change. Reducing emission due to deforestation and degradation (REDD) ,was considered as one of the major activities in this regard during Kyoto protocol in 2009 which laid foundation for the participating countries to be compensated financially for reduced carbon emission. Mexico convention -2012 required the countries to develop and implement a transparent and consistent monitoring, reporting and verification (MRV) process. Later in Paris agreement-2015, the parties agreed to limit the global warming to 2 degree centigrade and with further efforts to 1.5-degree centigrade furthering entailing the parties to prepare and communicate nationally determined contributions (NDCs) every five years. Nepal aimed to decrease the average annual deforestation rate by 0.05 percent from existing 0.44 percent in the terai region and 0.1 percent in the Chure. Nepal decided to develop its forest reference level (FRL) in national level for the historical period 2000-2010 considering Carbon dioxide and carbon pools above and below ground. As per the Forestry Sector Strategy, Nepal aims to increase carbon stock growth by at least 5% by 2025 as compared to 2015 and decrease mean annual deforestation rate to 0.05. After major change in administrative division in Nepal, forest management responsibility has shifted down to the Sub-national level. But forest resource studies have not been conducted yet in these levels. Despite a small country, Nepal has at least four clear physiological regions. The amount of carbon stock stored by different forest type are different depending upon species distribution, carbon volume and density for each species, and their distribution along ecological and physiological regions. Sal (shorea Robusta), for example, having one of the highest carbon densities, is a major forest types in Nepal. The purpose of this study was to generate forest map of the country, calculate carbon stock, gain and loss, and their rate in each province due to deforestation/afforestation using remote sensing data. Further Sal forest map was generated and its contribution in carbon stock was calculated using averaged national carbon density as well as using regional density method. According to the study, around 5.1 million hectares of Nepali land was forest in 2015 increasing from 4.2 million hectares in 2005. However, Sal forest has decreased during the same period. Province 1 contributed the maximum (130 Tg) and Province 2 the minimum (40Tg) of Carbon stock in 2015. Using the conventional method of calculation with national average density (108.08 t/ha), a total of 36.7T CO2 yr-1 carbon sink was observed in the Country. Whereas, with the new approach of calculation, a total of 44.7 T CO2 e of carbon sink per year was estimated during the same period. This approach holds potential for qualifying as an MRV process of Nepal. The subnational level forest and carbon statistics produced during this study can be important assets for the better forest governance. This can also pave way for policy formation and preparation of action plan for sustainable forest management and intervention strategy and obtaining better financial incentives participating in the reduction of emission due to deforestation and forest degradation (REDD) plus programs.

A cross-sectional study was carried out to determine the prevalence of subclinical mastitis (SCM) among medium to large scale household dairy farms in southwestern district, Jhenaidah, Bangladesh during July to December 2019. A total of 78 (n=100) lactating cows from household dairy farms (N=32) having three or more dairy cows were selected randomly as sampled populations. Milk samples were screened for SCM by using Surf Field Mastitis Test (SFMT). The prevalence of SCM varied among farm level [71.9% (95% CI: 53.3-86.3)], individual animal level [67.9% (95% CI: 56.4-86.3)] and quarter level [29.5% (95% CI: 24.5-34.9)]. Descriptive statistics represented the farmers and farm demography, characteristics of the sampled population, and overall management feature. Random Effect Logistic Regression identified, Body Condition Score (BCS) [OR=3.8 and 2.9, at cows level and quarter level respectively (BCS-2 vs. BCS-≥3)], and breed [OR=5.1 and 2.9, at cows level and quarter level respectively (HF× Sahiwal vs. HF × Local)] as potential risk factors. This study shows that SCM is highly prevalent in the study area, which is a major threat to the dairy industry's production performance. Regular screening by SFMT, proper hygiene, improve the management system, and farmer’s awareness is required to control the disease.

The eruption of the COVID-19 pandemic has affected every sphere of life and may forever change how we have always lived and conducted our businesses, and no one can resist the wind of change that is blowing. Of all the sectors of governance, the educational sector, particularly at the tertiary level, appears to have been most greatly affected and therefore requires a more pragmatic approach to resolution. As of 29th June, Sub-Sahara Africa has reported 382,190 cases of COVID-19. In rejoinder to the virus epidemic, several Sub Sahara African governments implement the resolution to slam learning institutions to enclose the infection. Consequently, advanced schooling institutions obliged to reorganize their loom, becoming more digitally become forward, and changing to online platforms.

An important aspect of the new sustainable development goals (SDGs) is a greater emphasis on reducing the health impacts of urban ambient air pollution (AAP) in developing countries. Meanwhile, the burden of disease attributable to AAP in sub-Saharan Africa (SSA) is growing, yet estimates of its impact in the region are likely underestimated due to a lack of air quality monitoring, the paucity of epidemiological studies, and important population vulnerabilities in the region. The lack of studies in the SSA region also represents an important global health disparity and environmental justice issue because thousands of air pollution health effects studies have been conducted in Europe and North America rather than in some of the most polluted regions of the world, such as SSA. In this review, we synthesize all of the ambient air pollution epidemiological studies that have been conducted in SSA to date. We highlight the gaps in AAP epidemiological studies conducted in different sub-regions of SSA and provide methodological recommendations for future environmental epidemiology studies addressing AAP in the SSA region.

The accumulation of high levels of lead or lead ions in a human body is harmful, particularly to children. Its neurotoxic effect is profound, damaging the central and peripheral nervous systems, resulting in stunted growth, behavioral problems and learning disabilities. The major source of lead or lead ions comes from the drinking water and tap water. The assessment of the water quality, including lead or lead ion content, is usually completed by a regional water department professional. This assessment is time-consuming and requires expensive instruments and skilled operators. Therefore, there is a need to produce a simple-use and relatively inexpensive method to detect lead or lead ions in water samples. This research has developed a simple-use, cost effective sensor system for the detection of lead ions in tap water. An under-potential deposited bismuth sub-layer on a thin gold film based electrochemical sensor was designed, manufactured and evaluated. Differential pulse voltammetry (DPV) measurement technique was employed in this detection. Tap water from the Cleveland, Ohio, USA regional water district was the test medium. Concentrations of lead ion in the range of 8 X 10^-8 M to 8 x 10^-4 M were evaluated. This DPV detection system required 3 -6 minutes to complete the detection measurement. A longer measurement time of 6 minutes was used for the lower lead ion concentration. The selectivity of this lead ion sensor was very good, and Fe III, Cu II, Ni II and Mg II at a concentration level of 5×10^-4 M did not interfere with the lead ion measurement.

My innovative entropy measure, Ismail entropy, namely, (IE) is an ultimate generalization to numerous generalized entropies within the literature. The fractal dimension of IE is identified in this paper. On another applicative note, this paper offers some potential applications of fractal dimension to smart cities. The paper ends with closing remarks combined with some challenging open problems and the next phase of research.

The adaptive identification method developed to evaluate the parameters of the Bouc-Wen hysteresis (BWH). The adaptive approach based on the use of adaptive observers. We synthesize adaptive identification algorithms using the second Lyapunov method. The boundedness of adaptive system processes shown in coordinate and parametric spaces. We prove exponential dissipativity of processes in an adaptive system. Estimating method proposed for signaling uncertainty in the system.

This study provides a thorough review and analysis of the evolution of the Greek vehicle fleet over the last ~30 years, which is next used for the generation of high granularity fleet projections and for the estimation of relevant environmental benefits by 2030. The integrated methodology developed takes also into account vehicle clustering and the Brown’s Double Simple Exponential Smoothing technique that together with the adoption of COPERT based emission factors allow for the estimation of the anticipated emissions in 2030. Expected 2030 emissions levels suggest a reduction across all pollutants in comparison to 2018, ranging from 3.7% for PM10 to 54.5% for NMVOC (and 46% for CO, 14% for SO2, 28% for NOX and 21% for CO2). We find that Greece is on track with national goals concerning the reduction of air pollution from the transportation sector, stressing the positive contribution of EVs and new, "greener" vehicles, and setting new challenges for the further improvement of the sector beyond the 2030 outlook.

This paper provides attempts to formalize Hayek’s theory of knowledge. It has been theoretically shown that exponential income distribution is a spontaneous order of the well-functioning market economy. We show that this theoretical result is supported by the empirical evidence from the United Kingdom and China. In particular, we empirically show how the income structure of China evolved towards an exponential distribution after the market-oriented economic reformation. Furthermore, we strictly prove that, if the income structure of an economy obeys an exponential distribution, the income summation over all households leads to an aggregate production function with Hicks-neutral-like technical progress, in which the technology factor is exactly equal to society’s information stock that is a result of combining all of decentralized decisions.

This article investigates the features of heat and mass transfer for the steady two-dimensional Williamson nanofluid flow across an exponentially stretched surface depending on suction/injection. The boundary conditions incorporate the impacts of the Brownian motion and thermophoresis boundary. The analysis of heat transfer is carried out for the two cases of prescribed exponential order surface temperature (PEST) and prescribed exponential order heat flux (PEHF). The ongoing flow problem is mathematically modeled under the basic laws of motion and heat transfer. The similarity variables are allowed to transmute the governing equations of the problem into a similarity ordinary differential equation (ODEs). The solution of this reduced non-linear system of ODEs is supported by the Homotopy analysis method (HAM). The combination of HAM arrangements is acquired by plotting the h-curve. In order to evaluate the influence of several emergent parameters, the outcomes are presented numerically and are plotted diagrammatically as a consequence of velocity, temperature and concentration proles.

In this paper, Lyapunov-Razumikhin technique, design of state-dependent switching laws, a fixed point theorem and variational methods are employed to derive the existence and the unique existence results of (globally) exponentially stable positive stationary solution of delayed reaction-diffusion cell neural networks under Dirichlet zero boundary value, including the global stability criteria \textbf{in the classical meaning}. Next, sufficient conditions are proposed to guarantee the global stability invariance of ordinary differential systems under the influence of diffusions. New theorems show that the diffusion is a double-edged sword in judging the stability of diffusion systems. Besides, an example is constructed to illuminate that any non-zero constant equilibrium point must be not in the phase plane of dynamic system under Dirichlet zero boundary value, or it must lead to a contradiction. Next, under Lipschitz assumptions on active function, another example is designed to prove that the small diffusion effect will cause the essential change of the phase plane structure of the dynamic behavior of the delayed neural networks via a Saddle point theorem. Finally, a numerical example illustrates the feasibility of the proposed methods.

In this paper, by using the q-integer, we introduce a new generalization of Fibonacci and Lucas sedenions called q-Fibonacci and q-Lucas sedenions. We present some fundamental properties of these type of sedenions such as Binet formulas, exponential generating fuctions, summation formulas, Catalan's identity, Cassini's identity and d'Ocagne's identity.

A novel low-power MOS-only voltage reference is presented. The Enz-Krummenacher-Vittoz (EKV) model is adopted to provide a new perspective on the operating principle. The normalized charge density, introduced as a new variable, serves as an indicator when trimming the output temperature coefficient. The proposed voltage reference consists of a specific current generator and a 5-bit trimmable load. Thanks to the well-match between the current source stage and the output stage, the non-linear temperature dependence of carrier mobility is automatically canceled out. The circuit is designed in 55 nm COMS technology. The operating temperature ranges from -40 ∘C to 120 ∘C. The average temperature coefficient of the output voltage can be reduced to 21.7 ppm/∘C by trimming. The power consumption is only 23.2 nW with a supply voltage of 0.8 V. The line sensitivity and the power supply rejection ratio at 100 Hz are 0.011 %/V and -89 dB respectively.

Introduction: Nephrotic syndrome (NS) remains the most frequent mode of presentation of glo-merular diseases in children; in addition, the NS is primitive, i.e., idiopathic in 90% of cases with an average age of onset between 2 and 10 years. The objective of our study was to describe the char-acteristics and outcome of NS in children from 3 major hospitals from one of the poorest countries worldwide (Chad). Patients and Methods: Observational, cross-sectional, descriptive and multicenter study which took place over a period of 36 months (January 1,2019-December 31,2021) carried out in 3 hospitals in N’Djamena (Chad). All children aged 1-15 years presenting with NS were included. Results: Out of 16,776 children hospitalized or followed-up in outpatient clinics, 24 cases of NS were identified, giving a prevalence of 0.14%. The median age at presentation was 6.16(1-10) years. Nineteen children were male (sex ratio 3.8). There were 8 impure NS (33.3%). Edema was present in all patients, oliguria in 29.16%(n=7), and arterial hypertension in 20.83%(n=5) of cases. Mean proteinuria, albuminemia and total proteins were 2.86g/L, 19.13g/L and 30.41g/L respectively. Median serum creatinine was 87.3 µmol/L(75-1375µmol/L); three patients had acute renal failure on admission. Four patients had secondary NS. All patients (n=20) with idiopathic NS had received corticosteroid therapy; steroid-sensitivity was found in 90% of patients. Those who were not ster-oid-sensitive or relapsed underwent kidney biopsy (n=7); the most represented histological lesion was focal segmental glomerulosclerosis (FSGS; n=4), followed by minimal change disease (n=2), and membranoproliferative glomerulonephritis (n=1). The median length of hospitalization stay was 10.67 (5-27) days. None of the patients with idiopathic NS died. At last follow-up sixteen patients (80%) achieved long-term complete remission with normal renal function; however, 4 had subse-quent relapses. 16 patients. One patient with secondary NS died. Conclusion: In Chad childhood idiopathic nephrotic syndrome involves mostly young male; steroid sensitivity is as high as 95% and in the long-term 80% of the patients are in remission with normal renal function.

In this paper, a new multi parameter iterative algorithm is proposed to address the PageRank problem based on the multi-splitting iteration method described by Gu et al . The proposed method in each iteration needs to solve two linear subsystems by splitting the coefficient matrix, therefore, we consider inner and outer iteration to find the approximate solutions of these linear subsystems. It can be shown that the iterative sequence generated by the multi parameter iterative algorithm finally converges to the PageRank vector when the parameters satisfy the certain conditions. Numerical experiments show that the proposed algorithm has better convergence and numerical stability than the existing algorithms.

Infection of liver flukes (Opisthorchis viverrini) is partly due to their suitability for habitats in sub-basin areas, which causes the intermediate host to remain in the watershed system in all seasons. Spatial monitoring of fluke infection at the small -basin analysis scale is important because this can enable analysis at the level of the spatial factors involved and influencing infections. A geographic weighted regression model was developed to analyze the spatial characteristics of liver fluke infection, aiming to 1. analyze the spatial factors associated with human liver fluke infection according to sub-basin boundaries and 2. generate an alternative model for enhancing the effectiveness of preventive public health management to reduce the risk of liver fluke infection in humans. The number of infected persons was obtained from local authorities and converted into a percentage of infected people and generated as raster data with a heat map so that the data were continuous and defined as dependent variables. The independent set consisted of nine variables, both vector and raster data, that correlated the location with the village location of an infected person. The results showed that the variables X5stream, X7ndmi, and X9savi were statistically significantly correlated to the percentage of infected people, with the t-stat and p-value being (-2.068, 1.875, and -2.661) and (0.048, 0.034, and 0.021), respectively. The GWR model was able to increase accuracy more than the comparable models such as OLS, in all tests of the four alternative models, with an accuracy increase in R2 of 7.69% (0.576 to 0.624). This study confirms that the development of spatial models with GWR models can screen for factors associated with liver fluke infection at the level of small spatial units such as sub-basins.

Land resources have been under tremendous anthropogenic pressure with the consequence of their degradation. It is therefore necessary that the land resources must be managed effectively for sustainable development. Different from the developed countries, carbon inventories and data bank to monitor carbon sequestration potential of different ecosystems are unavailable in India. Micro-level studies are essential for sustainable land use management for a land scarce nation like India. To achieve the desirable goal of the present study, a total of 33 tree-based land uses were identified from forested and agricultural landscapes. Of these total land uses, five were in forest landscapes and rest in agricultural landscapes categorized into forest tree plantations (8 land uses), agroforestry (nine land uses), commercial crop plantations (six land uses) and fruit orchards (five land uses). A stratified random nested quadrate sampling method was adopted for vegetation analysis of the different land uses. The SOC, biomass and carbon accumulation in the tree-based land uses were significantly different from each other. Mixed forest soil had the highest amount of SOC, primary nutrients, standing biomass carbon, and ecosystem carbon. Positive correlations were observed between SOC, total standing biomass, litter production, and ecosystem carbon. The sequence of best tree based land uses in terms of total SOC (up to 60 cm depth), total plant biomass, total plant biomass carbon and ecosystem carbon was mixed species forest (126.67, 781.21, 390.61 and 517.27) > sole tree species stands in forest landscape (109.71, 192.56, 96.28 and 205.98) > tea plantations (103.19, 77.07, 38.54 and 141.74) > homegardens (90.34, 97.38, 48.69 and 139.02) > mixed plantation of Anthocephalus cadamba + Swietenia macrophylla (60.07, 111.86, 55.93 and 116.02) > Swietenia macrophylla based agroforestry (62.49, 83.82, 41.91 and 104.40) > mixed plantation of Tectona grandis + Milvus migrans (60.0, 85.97, 42.99 and 102.90). Similarly, the order of the major land uses was forest > commercial crop plantation > forest tree plantations > agroforestry > fruit orchards. The overall average ecosystem carbon accumulation in forests was 3.24 times more than the land uses in agricultural landscapes. The ecosystem carbon accumulation in the tree-based land uses in both forest and agricultural landscape was highly variable and was significantly different from each other. Land use conversion from forest to agriculture can reduce more than half of the carbon stock, but converting into homegardens, tree plantations or agroforestry enhanced carbon storage of the land use systems. The present findings can be used as baseline information for developing prediction models for probable effects of different land use, future intervention and sustainable management of land use systems.

The quantification of sea surface temperature (SST) through space platforms has revolutionized how we obtain information at a global level. However, the main disadvantage of obtaining SST with satellite images consists of its inherent coarse spatial resolution. One solution could be the use of downscaling algorithms to create sequences of matrices at a higher resolution. We used the same SST data source from the MODIS-Aqua sensor at three spatial resolutions of 9 km, 4.5 km, and 1 km in the Gulf of California. Based on an open-source algorithm, the original SST images were downscaled to 4.5 km, 1 km, 500 m, 250 m, and 125 m per pixel scales. Results indicate a strong linear relationship between the original SST-MODIS data and the modeled data for all spatial resolutions. This study demonstrates the feasibility of an open-source downscaling algorithm to enhance the spatial resolution of SST images in a marginal sea.

Validation of satellite sea surface salinity (SSS) products is typically based on comparisons with in-situ measurements at a few meters depth, that are mostly done at a single location and time. The difference in term of spatio-temporal resolution between the in-situ near-surface salinity and the two-dimensional satellite SSS results in a sampling mismatch uncertainty. The Climate Change Initiative (CCI) project has merged SSS from three satellite missions. Using an optimal interpolation, weekly and monthly SSS and their uncertainties are estimated at a 50 km spatial resolution over the global ocean. Over the 2016-2018 period the mean uncertainty on weekly CCI SSS is 0.13, whereas the standard deviation of weekly CCI minus in-situ Argo salinities is 0.24. Using high resolution SSS simulations, we estimate the expected uncertainty due to the CCI versus Argo sampling mismatch. Most of the largest spatial variability of the satellite minus Argo salinity are observed in regions with large mismatch. A quantitative validation is performed by considering the statistical distribution of the CCI minus Argo salinity normalized by the sampling and retrieval uncertainties. This quantity should follow a Gaussian distribution with a standard deviation of 1, if all uncertainty contributions are properly considered. We find that 1) the sampling mismatch can explain most of the observed differences between Argo and CCI data, especially for monthly products and in dynamical regions (river plumes, fronts), 2) overall, the uncertainties are well estimated in CCI version 3, much better compared to CCI version 2. There are a few dynamical regions where discrepancies remain, and where the satellite SSS, their associated uncertainties and the sampling mismatch estimates should be further validated.

Global malaria epidemiology has changed in the last decade with a substantial increase in cases and death being recorded. Over 90% of global cases and deaths occur in Sub-Saharan Africa (SSA). Tanzania accounts for about 4% of all cases and deaths reported in recent years. It is believed that several factors contribute to the resurgence of malaria, parasite resistance to antimalarials and mosquito resistance to insecticides being at the top of the list. The presence of sub-microscopic infections poses a significant challenge to malaria rapid diagnostic tests (mRDT), particularly in low-endemic areas. Our cross-sectional surveys in Handeni and Moshi, Tanzania assessed the effect of low parasite density on mRDT. A significant difference (P˂0.001) in malaria prevalence by mRDT, light microscopy (LM) and nested polymerase chain reaction (PCR) was found among age groups. In comparison to all other groups, school-age children (5-15 years) had the highest prevalence of malaria. Based on the results of this study, mRDT may miss up to 6% of cases of malaria mainly due to low-density parasitaemia. Routinely used mRDT will likely miss the sub-microscopic parasitemia which will ultimately contribute to the continued spread of malaria and hinder efforts to control and eliminate it.

Human papillomavirus (HPV) self-sampling (Self-HPV) is a promising strategy to improve cervical cancer screening coverage in low-income countries. However, issues associated with women who prefer conventional HPV clinical-sampling over HPV self-sampling may affect screening participation. To address this issue, our study assessed factors associated with women’s preferences related to Self-HPV. This study was embedded in a large clinical trial recruiting women aged 30–49 years in a primary HPV-based study termed “3T-Approach” (for Test-Triage-Treatment), launched in 2018 at Dschang District Hospital, West Cameroon. Participants were invited to perform a Self-HPV. After the sampling and before receiving the results, participants completed a questionnaire about cervical cancer screening and their preferences and perceptions around Self-HPV. The median age of the 2201 participants was 40.6 (IQR 35–45) years. Most (1693 (76.9%)) preferred HPV self-sampling or had no preference for either method and 508 (23.1%) preferred clinician-sampling. Factors associated with an increased likelihood of reporting a clinician-sampling preference were tertiary educational level (14.4% CI: 12.8–16.1 vs 29.5% CI: 25.6–33.6) and being an employee with higher grade professional or managerial occupations (5.5% CI: 3.8–7.9 vs 2.6% CI: 2.3–2.8). The main reported reason for women preferring clinician-sampling was a lack of “self-expertise”. Most women (&gt;99%) would agree to repeat HPV self-sampling and would recommend it to their relatives. HPV self-sampling in the cultural context of central Africa was well accepted by participants, but some participants would prefer to undergo clinician sampling. Health systems should support well-educated women to increase self-confidence in using HPV self-sampling.

Critical care of neonates involves substantial usage of antibiotics and exposure to multidrug resistant (MDR) nosocomial pathogens. These pathogens are often exposed to sub-MIC doses of antibiotics which might result in a range of physiological effects. Therefore, to understand the outcome of sub-inhibitory dosage of antibiotics on Staphylococcus populations, nasal swab specimens were collected from 34 neonates admitted to the Sick Newborn Care Unit between 2017-2018, a total of 41 non-repetitive isolates were included in this study. Staphylococcus haemolyticus was the prevalent species (58.54%) with high non-susceptibility to cefotaxime (CTX) (79.16%), gentamicin (87.50%), and meropenem (54.17%). Biofilm forming abilities of S. haemolyticus isolates in the presence of sub-optimal CTX (30μg/mL), the predominantly prescribed β-lactam antibiotic, were then determined by crystal violet assays and extracellular DNA (eDNA) quantitation. CTX was found to significantly enhance biofilm production among the non-susceptible isolates (p-valueWilcoxin test- 0.000008) with increase in eDNA levels (p-valueWilcoxin test- 0.000004). Additionally, no changes in non-susceptibility were observed among populations of two MDR isolates, JNM56C1 and JNM60C2 after >500 generations of growth in the absence of antibiotic selection in vitro. These findings demonstrate that sub-MIC concentration of CTX induces biofilm formation and short-term non-exposure to antibiotics does not alter non-susceptibility among S. haemolyticus isolates.

This paper examines the asymmetrical relationship between exchange rate and consumer prices in 40 Sub-Saharan African (SSA) countries from 1990q1 to 2017q4. The exchange rate pass-through (ERPT) to consumer prices is estimated for each country by using the nonlinear autoregressive distributed lags (NARDL) framework and dynamic panel estimators robust to cross-sectionally correlated errors. Firstly, our findings suggest an asymmetrical ERPT in the SSA region during the short-term, whereas there are mixed results across sub-regions in the long-term. Next, we find incomplete and significant ERPT to consumer prices in the entire SSA region which is higher during the depreciation of the local currency than after appreciations. Third, we find nonlinear ERPT with respect to the size of the exchange rate. The pass-through is higher during large exchange rate changes than after small changes. Finally, we find that the pass-through is greater in the countries with fixed exchange rate regime (CFA franc zone) having low inflationary environment than in the other SSA countries with flexible exchange rate regime and high inflation levels. As a result, policymakers should take into account these asymmetries and non-linearities to improve the credibility of monetary policy, strengthen trade liberalization and establish competitive market structures in the Sub-Saharan region.