An entrepreneur is a business-able physical person who performs activities to gain the profit and who is registered according to law. Starting from the national and theoretical and legal solutions and court practice from comparative law, the authors analyze the concept and the legal position of an individual entrepreneur noticing the problems and inconsistencies in legal regulations. The authors of the work make a few conclusions and suggestions: 1) terminology is not coordinated with legal terminology from comparative law. In our law, the legal term is “entrepreneur”, which is a too wide and unspecified term because in economic profession this term represents the genus term for individual and collective entrepreneurship; 2) analyze all forbidden activities for entrepreneurs, judge the reasons pro et contra and work on eliminating prohibitions and favouring legal entities; 3) set by law the bankruptcy of an individual entrepreneur i.e. the individual bankruptcy of a physical person; 4) work on passing a separate legislation in the field of the individual entrepreneurship, especially on passing and changing the laws which would regulate handicrafts (including old crafts and jobs of home industry), free professions as well as agricultural activity.

Hoof capability of domesticated, barefoot-kept horses and ponies traversing artificial environments remains undocumented. In this study, four equines were walked in-hand for 16 days, covering a distance of 50 km, over three solid surfaces. Subsequently, we conducted an assessment of hoof morphology. Hooves (n = 16) were radiographed before and after the trial, spaced 3 weeks apart, for sole depth measurement. External measurements of feet were recorded 24 hours before day 1 and repeated on day 9. Radiographs revealed increased sole depth in 11 hooves, notably at the palmar process, and some misalignment in certain phalanges. On day 9, after a 36-km distance, all hooves exhibited calloused soles and frogs, and required trimming. The front hooves of the horses had a pronounced, natural concavity. Hard surfaces were found to stimulate sole growth, with a portion of sole thickness preferentially accumulating within the dermal zone. Collectively, the maintenance of short trimming cycles to prevent misalignment, minimize hoof-wall loading and maintain a load-sharing system, may be necessary for barefoot-kept horses considering their rapid growth rate.

It is commonly believed that exposing Cannabis sativa (cannabis) plants to ultraviolet (UV) radiation can enhance Δ⁹-tetrahydrocannabinol (Δ⁹-THC) concentrations in female inflorescences and associated foliar tissues. However, a lack of published scientific studies has left knowledge-gaps in the effects of UV on cannabis that must be elucidated before UV can be utilized as a horticultural management tool in commercial cannabis production. In this study we investigated the effects of UV exposure level on photosynthesis, growth, inflorescence yield, and secondary metabolite composition of two indoor-grown cannabis cultivars: ‘Low Tide’ (LT) and ‘Breaking Wave’ (BW). After growing vegetatively for 2 weeks under a canopy-level photosynthetic photon flux density (PPFD) of ≈225 μmol·m^–2·s^–1 in an 18-h light/6-h dark photoperiod, plants were grown for 9 weeks in a 12-h light/12-h dark “flowering” photoperiod under a canopy-level PPFD of ≈400 µmol·m^–2·s^–1 and 3.5 h·d^–1 of supplemental UV radiation with UV photon flux densities (UV-PFD) ranging from 0.01 to 0.8 μmol·m^–2·s^–1 provided by light-emitting diodes (LEDs) with a peak wavelength of 287 nm (i.e., biologically-effective UV doses of 0.16 to 13 kJ·m^–2·d^–1). The severity of UV-induced morphology (e.g., whole-plant size and leaf size reductions, leaf malformations, and stigma browning) and physiology (e.g., reduced leaf photosynthetic rate and reduced F_v/F_m) symptoms worsened as UV exposure level increased. While the proportion of dry inflorescence yield that was derived from apical tissues decreased in both cultivars with increasing UV exposure level, total dry inflorescence yield only decreased in LT. The equivalent Δ⁹-THC and cannabidiol (CBD) concentrations also decreased in LT inflorescences with increasing UV exposure level. While the total terpene content in inflorescences decreased with increasing UV exposure level in both cultivars, the relative concentrations of individual terpenes varied by cultivar. The potential for using UV to enhance cannabis quality must still be confirmed before it can be used as a production tool for modern, indoor-grown cannabis cultivars.

Intercropping as a practice is very crucial in livelihood sustainability among smallholder farm-ing communities in many growing countries. However, for most cropping systems, the benefits of intercropping have yet to be optimized due to a lack of knowledge regarding spatial ar-rangements and planting densities. The objective of the study was to find out the profitability of maize-vegetable intercropping and the yields obtained from various spatial arrangements and planting densities of intercrops. From May to October 2019 and 2020 respectively, Experimental trials were set up in the rainy season in Northern, Upper West and Upper East regions of Ghana comprising of eight treatments each. A randomized complete block experimental design was used for the field layout with three to four replications. Data was collected on grain and fruit yield and land equivalent ratios was estimated (LER). At the end of the trial, important spatial arrangements and planting densities were identified that can be adopted by smallholder famers for system intensification. For okra, the optimal intercropping system under sufficient rainfalls was 2 okra rows at higher density and 2 maize rows at lower density for Upper West Region. In Upper East Region, the optimal spatial arrangement to recommend is 1 row of maize at recom-mended density: 2 rows of okra at lower density under well distributed rainfalls. For roselle, intercropping with spatial arrangement of 2 rows of maize at higher density: 1 row of okra at recommended density was recommended in Northern Region.

Healthcare-associated infections (HAI) worldwide includes infections by ESKAPE-E pathogens. Environmental surfaces and fomites are important components in HAI transmission dynamics, and shoe soles are vectors of HAI. Ultraviolet (UV) disinfection is an effective method to inactivate pathogenic microorganisms. In this study, we investigated whether the SANITECH UVC shoe sole decontaminator equipment that provides germicidal UVC radiation could effectively reduce this risk of different pathogens. Six standard strains and four clinical MDR strains in liquid and solid medium were exposed to a UVC System at specific concentrations at other times. Bacterial inac-tivation (growth and cultivability) was investigated using colony counts and resazurin as meta-bolic indicators. SEM was performed to assess the membrane damage. Statistically significant reduction in cell viability for all ATCCs strains occurred after 10 sec of exposure to the UVC sys-tem, except for S enterica, which only occurred at 20 sec. The cell viability of P. aeruginosa (90.9%), E. faecalis and A. baumannii (85.3%), S. enterica (82.9%), E. coli (79.2%) and S. aureus (71.9%) was re-duced considerably at 20 sec. In colony count, after 12 sec of UVC exposure, all ATCC strains showed a 100% reduction in CFU counts, except for A. baumannii, which reduced 97.7%. A sub-stantial reduction of colonies above 3 log10 was observed at 12 and 20 sec in all bacterial strains tested, except for A. baumannii ATCC 19606 (12 sec). The exposure of ATCCs bacterial strains to the UVC system for only 2 sec was able to reduce 100% in the CFU count in all ATCCs strains, S. au-reus, P. aeruginosa, E. coli, A. baumannii, E. faecalis, except the S. enterica strain which had a statis-tically significant reduction of 99.7%. In ATCC strains, there was a substantial decrease in colonies after 4 sec (sec) of exposure to the UVC system, with a reduction ranging from 3.78-4.15 log10 CFU/mL. This reduction was observed in MDR/ESKAPE-E strains within 10 sec, showing that UVC could eliminate above 3.84 log10 CFU/mL. SEM showed a reduction of pili-like appendages after UVC treatment in all strains except for E. coli (ATCC 25922). The Sanitech UVC shoe sole decontaminator equipment from Astech Co. effectively killed in vitro a series of ATCCs and MDR/ESKAPE-E bacteria of sanitary interest, commonly found in the hospital environment.

Since the recent legalization of medical and recreational use of cannabis (Cannabis sativa L.) in many regions worldwide, there has been high demand for research to improve yield and quality. With the paucity of scientific literature on the topic, this study investigated the relationships between light intensity (LI) and photosynthesis, inflorescence yield, and inflorescence quality of cannabis grown in an indoor environment. After growing vegetatively for 2 weeks under a canopy-level photosynthetic photon flux density (PPFD) of ≈ 425 μmol·m-2·s-1 and an 18-h light/6-h dark photoperiod, plants were grown for 12 weeks in a 12-h light/12-h dark ‘flowering’ photoperiod under canopy-level PPFDs ranging from 120 to 1800 μmol·m-2·s-1 provided by light emitting diodes. Leaf light response curves varied both with localized (i.e., leaf-level) PPFD and temporally, throughout the flowering cycle. Therefore, it was concluded that the leaf light response is not a reliable predictor of whole- plant responses to LI, particularly crop yield. This may be especially evident given that dry inflorescence yield increased linearly with increasing canopy-level PPFD up to 1800 μmol·m-2·s-1, while leaf-level photosynthesis saturated well below 1800 μmol·m-2·s-1. The density of the apical inflorescence and harvest index also increased linearly with increasing LI, resulting in higher-quality marketable tissues and less superfluous tissue to dispose of. There were no LI treatment effects on cannabinoid potency, while there were minor LI treatment effects on terpene potency. Commercial cannabis growers can use these light response models to determine the optimum LI for their production environment to achieve the best economic return; balancing input costs with the commercial value of their cannabis products.

Abstract: A two-year study of pearl millet-groundnut cropping systems across two fertilizer levels was conducted at the INRAN/TARNA research station in Maradi, Niger in the Sahelian zone of West Africa. The objective of this study was to identify the best cropping system with and without fertilizer application to optimize pearl millet and groundnut yields, land use efficiency, and economics as measured by value-to-cost ratio. The experiment was conducted with three replications, and ten treatments combination of five pearl millet and groundnut cropping systems (pearl millet and groundnut sole crops, and three pearl millet – groundnut intercrops), and two fertilizer levels. Sole cropping produced the highest pearl millet grain by over 300 kg ha-1 and groundnut pod yields by over 500 kg ha-1, but all the intercropping systems had a LER above 1.0 with land use efficiency increased by 19 to 41%, also intercropping increased diversity, and reduced risk. Fertilizer application increased yields in all cropping systems by 200 to 600 kg ha-1. Government subsidy increased the value-to-cost ratio by 0.5 to 2, 5 units, and was required for economic response for pearl millet sole and intercrops in 2022. The groundnut sole cropping system had the greatest economic response to fertilizer application. Based on the risky environment and multiple end uses needed by producers, the intercrop system M-G: 1:3:1 with fertilizer application is usually the best option to optimize pearl millet and groundnut production.