The capabilities of autonomous mobile robotic systems have been steadily improving due to recent advancements in computer science, engineering, and related disciplines such as cognitive science. In controlled environments, autonomous robots have been able to achieve relatively high levels of autonomy. In more unstructured environments, however, the realisation of autonomous mobile robots remains challenging due to limitations in the robots’ external environment understanding. Many autonomous mobile robots use classical, learning-based or hybrid approaches for navigation. The classical navigation approach typically includes robot perception, localisation, environmental mapping, path planning and motion control stages. More recent learning-based methods may replace the complete navigation pipeline or selected stages of the classical approach. For effective deployment, autonomous robots need to be able to understand their external environments at a sophisticated level according to their intended applications. Therefore, in addition to robot perception, scene analysis and higher-level scene understanding (e.g., traversable/non-traversable, and rough or smooth terrain) are required for autonomous robot navigation in unstructured outdoor environments. A wide number of alternative approaches have been proposed in recent years to attempt to address these scene understanding requirements. This paper provides a comprehensive review and critical analysis of these methods in the context of their applications to the problems of robot perception and scene understanding in unstructured environments, and the related problems of localisation, environment mapping and path planning. State-of-the-art sensor fusion methods and multimodal scene understanding approaches are also discussed and evaluated within this context. The paper concludes with an in-depth discussion regarding the current state of the autonomous ground robot navigation challenge in unstructured outdoor environments and the most promising future research directions to overcome these challenges.

In this work we present some driving strategies for a type of omnidirectional mobile robot, the offset-differential robot. This system presents omnidirectionality while using any type of standard wheels, allowing for applications in all terrain. The work is based on the full kinematic and dynamic analysis of the robot, including the passive elements, to explain some unexpected behaviors that appear during its motion. The stable and unstable behaviors are characterized and some driving strategies are stated in order to achieve the desired performance regarding precise positioning and speed.

The Dubai Digital Government launched its recent guidelines, which call for artificial intelligence systems to be subject to legal accountability. This study discusses the extent to which autonomous robots can be granted legal personality in UAE law and the consistency of this approach with the provisions of Islamic jurisprudence. This research paper answered two main questions: First, the extent to which these guidelines are considered the beginning of work on granting legal personality to AI systems in the UAE. Second, what form of legal personality can be given to autonomous robots in UAE law to be consistent with the provisions of Islamic jurisprudence as a primary source of legislation in the country? The research concluded the impossibility of considering autonomous robots as a "thing" and classifying them within the concept of "persons." It also concluded that it is possible to give them legal personality according to two legislative solutions: granting them partial or incomplete performance eligibility like minors.

Automated Guided Vehicles are self-guided vehicles used in manufacturing and warehouses for material transport. They play a vital role in just-in-time material delivery, ensuring smooth production lines. However, disruptions in their fixed routes can lead to efficiency losses. This paper studies unexpected disruptions in mobile robot routes, assessing the costs of rectification using the E* analysis. The study highlights the significant additional cost of such disruptions, underscoring the importance of their consideration in AGV route planning to enhance system resilience.

In the design of educational robots, it seems undecided whether robots should show social behaviors and look human-like or that such cues are indifferent to learning. We conducted an experiment with different designs of social robots, rehearsing the multiplication tables with primary school children in Hong Kong. Results show that affective bonding tendencies may occur but did not significantly contribute to the learning progress of these children, perhaps due to the short interaction period. Nonetheless, 5 minutes of robot tutoring improved their scores with about 30% and only for a few challenged children, performance dropped. We discuss that topics such as teaching language skills may be fostered by human likeness in appearance and behaviors but that for STEM-related subjects, the social aspects of robots hardly matter.

The increasing number of robots around us will soon create a demand for connecting these robots in order to achieve goal-driven teamwork in heterogeneous multi-robot systems. In this paper, we focus on robot teamwork specifically in dynamic environments. While the conceptual modeling of multi-agent teamwork has been studied extensively during the last two decades, related engineering concerns have not received the same degree of attention. Therefore, this paper makes two contributions. The analysis part discusses general design challenges that apply to robot teamwork in dynamic application domains. The constructive part presents a review of existing engineering approaches for challenges that arise with dynamically changing runtime conditions. An exhaustive survey of robot teamwork aspects would be beyond the scope of this paper. Instead, we aim at creating awareness for the manifold dimensions of the design space and highlight state-of-the-art technical solutions for dynamically adaptive teamwork, thus pointing at open research questions that need to be tackled in future work.

Human-Robot Interaction (HRI) for collaborative robots has become an active research topic recently. Collaborative robots assist the human workers in their tasks and improve their efficiency. But the worker should also feel safe and comfortable while interacting with the robot. In this paper, we propose a human-following motion planning and control scheme for a collaborative robot which supplies the necessary parts and tools to a worker in an assembly process in a factory. In our proposed scheme, a 3-D sensing system is employed to measure the skeletal data of the worker. At each sampling time of the sensing system, an optimal delivery position is estimated using the real-time worker data. At the same time, the future positions of the worker are predicted as probabilistic distributions. A Model Predictive Control (MPC) based trajectory planner is used to calculate a robot trajectory that supplies the required parts and tools to the worker and follows the predicted future positions of the worker. We have installed our proposed scheme in a collaborative robot system with a 2-DOF planar manipulator. Experimental results show that the proposed scheme enables the robot to provide anytime assistance to a worker who is moving around in the workspace while ensuring the safety and comfort of the worker.

This paper describes a new generation of computational intelligence founded on the ancient idea of compassion called Artificial Compassion. The creation of Artificial Compassion is the result of two coinciding historical developments. The first is the increasing discoveries of human sciences in new fields like neuroendocrinology and psychoneuroimmunology. This provides the spark for Artificial Compassion. For example, we once thought with certainty that our brain is fixed for life but neuropsychology and a device called the fMRI have shown it is “plastic”. It changes constantly throughout our lives in response to our experiences. Remarkably, we also now know it is changed for the better through positive emotions like compassion, kindness and happiness. So, too, are the immune, endocrine, genetic, cardio and neural systems influenced and changed by our emotional experiences. This new perspective on emotions and plasticity validates much of ancient wisdom in medical systems outside the west. Long held assumptions about emotion are unsuitable for humanity. The second development is ‘machine rub off’. We are in symbiotic relation with our devices today and we are plastic. We are changed by our interactions but many people have computer rage. We need Artificial Compassion to replace computer rage with positive plasticity.

During the most recent years, a lot of research has been done in creating robots with more self-governance so that they can overcome the challenges that real world environments present. The robot's limited versatility in real world applications can be overcome by the development of Legged robots. Also, as they permit movement in unavailable territory to robots with wheels, Legged Robots are more advantageous. But the potency of the legged robots explicitly its energy usage among alternate points of view really fall behind robots that use wheels. So, the present status of development, there are as yet a few perspectives that need to be analysed, optimized and enhanced. This paper presents review of literature of various biologically inspired legged robots, various techniques adopted for their analysis and optimization and the analysis and optimization of the ones that are not biologically inspired

As a result of extensive research in the field of mobile robots (rovers) and swarms, a number of algorithms exist to assist them for executing a mission in the three levels of software architecture: strategic (interaction loop level), tactic (planning) and operational (sensing, control and actuation). They allow them to achieve their goals while adapting to their environment through a multitude of methods designed for each situation. For this reason, a literature review of the latest research conducted in previous years is required to identify new research trends in human-swarm interaction applied to help humans in hazardous environment such as militarized zone. In this paper, we will present some interesting algorithms for interactive and autonomous mobile robots acting in swarms in an open and crowded environment. A discussion will focus on comparing different algorithms and their advantages and disadvantages.

The processes of an ageing population are becoming a challenge in the context of social, technological, and research policy. Also, according to the perspective 2080, Poland belongs to the group of counties with the prognosticated number of citizens over 65 to account for one-third of the population. Different strategies aimed at dealing with the mentioned demographic challenges include widespread use of humanoids in care for older people. As the research of such nature was the first in Poland, this article aimed to identify the factors and their interlinks that determine the attitude and the future use of humanoids by older people of the Polish society. Based on the specific attributes of humanoid technology, the model hypothesises that an attitude to technology can be directly predicted by four perceived technology attributes, namely an impact on the quality of life, technological impact, ethical and social problems, while user attitude towards humanoid technology is predicted to have an indirect influence on the future intention of use. A survey method was used to collect research data. An electronic questionnaire was used to conduct confidential interviews. Finally, 643 filled questionnaires were received. Results received via a regression analysis confirmed that the most important factor influencing human attitudes was a positive social impact achieved using humanoids in the care of lonely people and improving the safety of older people. Another important factor was a technological impact from the use of humanoids performing functions desired by respondents. The technology in question could be useful for reminding older people about taking medication, informing family members about the health condition of their older people and calling for help on their behalf.

In vitro fertilization (IVF) has revolutionized the field of assisted reproductive technologies (ART) by offering hope to individuals and couples struggling with infertility. Nevertheless, traditional IVF methods are not exempt from drawbacks, such as suboptimal success rates, intrusive procedures, and ethical considerations. The introduction of micro/nanorobotics in IVF offers a revolutionary chance to tackle these difficulties. This paper presents a short review of the utilization of micro/nanorobotics in IVF, investigating progress in the manipulation of sperm, retrieval of oocytes, culture of embryos, and potential future developments in this fast progressing area. In this discussion, we explore the fundamental concepts, advantages, difficulties, and possible influence of micro/nanorobotics in transforming IVF processes and enhancing patient outcomes.

Dynamic systems which underly controlled systems are expected to increase in complexity as robots, devices, and connected networks become more intelligent. While classical stable systems converge to a stable point (a sink), another type of stability is to consider a stable path rather than a single point. Such stable paths can be made of saddles which draw in trajectories from certain regions, and then push the trajectory toward the next saddle point. These are chains of saddles are called stable heteroclinic channels (SHCs), and can be used in robotic control to represent time sequences. While we have previously shown that each saddle is visualizable as a trajectory waypoint in phase space, how to increase the fidelity of the trajectory was unclear. In this paper, we hypothesized that the waypoints can be individually modified to locally vary fidelity. Specifically, we expected that increasing the saddle value (ratio of saddle eigenvalues) causes the trajectory to slow to more closely approach a particular saddle. Combined with other parameters that control speed and magnitude, a system expressed with an SHC can be modified locally, point by point, without disrupting the rest of the path, supporting their use in motion primitives. However, even more complex trajectory shape modifications are possible. While some combinations can enable a trajectory to better reach into corners, other combinations can rotate, distort and round the trajectory in the region of a corner. In our example, modifying select saddle values produced a 32% decrease in the trajectory error of a complex trajectory produced using this system. This is an effect not visible in previous 1D studies, that can lead to different learnable and tunable representations of dynamic systems.

Biomimetic stimuli-responsive materials can respond to various external stimuli in the form of structural or morphological transformations by actively or passively converting input energy into mechanical energy. They are the core element of soft actuators for typical smart devices like soft robots, artificial muscles, intelligent sensors and nanogenerators. While significant progresses have been made in bioinspired stimuli-responsive materials, they have not yet achieved the remarkable properties in biological systems. In this review, we will discuss recent advances in biomimetic stimuli-responsive materials that are instrumental for soft actuators. Different stimuli-responsive principles for soft actuators are firstly discussed, including fluidic, electrical, thermal, magnetic, light and chemical stimuli. We further summarize the state-of-the-art stimuli-responsive materials for soft actuators and explore the advantages and disadvantages of using electroactive polymers, magnetic soft composites, hydrogels, liquid crystal elastomers, shape memory alloys and chemical-responsive materials. Finally, we provide a critical outlook on the field of stimuli-responsive soft actuators, and emphasize the challenges in the process of their implementation to various industries.

In recent years, both domestic and international research on quadruped robots has advanced towards high dynamics and agility, with a focus on high-speed locomotion as a representative motion in high-dynamic activities. Quadruped animals like cheetahs exhibit high-speed running capabilities, attributed to the indispensable role played by their flexible spines during the flight phase motion. This paper establishes dynamic models of quadruped robots with different degrees of spine flexibility, providing a parameterized description of the flight phase motion for both rigid trunks and flexible spine quadruped robots. By setting different initial values for the spine joint and calculating the flight phase results for both types of robots at various initial velocities, the study compares and analyzes the impact of a flexible spine on the flight phase motion of quadruped robots. Through comparative experiments, the research aims to validate the influence of a flexible spine during the flight phase motion, providing insights into how spine flexibility affects the flight phase motion of quadruped robots.

Underwater robots often encounter the influence of confined underwater environments during underwater exploration. These environments include underwater caves, sunken ships, submerged houses, and pipeline structures. Robot positioning in these environments is strongly disturbed, leading not only to the failure of some commonly used positioning methods but also to an increase in errors in positioning systems that normally function well in open water. In order to overcome the limitations of positioning methods in underwater confined environments, researchers have studied different underwater positioning methods and selected suitable methods for positioning in such environments. These methods can achieve high-precision positioning without relying on assistance from other platforms, and are referred to as autonomous positioning methods. Autonomous positioning methods for underwater robots mainly include SINS/DR positioning and SLAM positioning. In addition, in recent years, researchers have also developed some bio-inspired autonomous positioning methods. This article introduces the applicable robot positioning methods and sensors in underwater confined environments and discusses the research directions of robot positioning methods in such environments.

Social robots may become an innovative means to improve the well-being of individuals. Earlier research showed that people easily self-disclose to a social robot even in cases where that was unintended by the designers. We report on an experiment of self-disclosing in a diary journal or to a social robot after negative mood induction. The off-the-shelf robot was complemented with our inhouse developed AI chatbot and could talk about ‘hot topics’ after having it trained with thousands of entries on a complaint website. We found that people who felt strong negativity after being exposed to shocking video footage benefited the most from talking to our robot rather than writing down their feelings. For people less affected by the treatment, a confidential robot chat or writing a journal page did not differ significantly. We discuss emotion theory in relation to robotics and possibilities for an application in design (the emoji-enriched ‘talking stress ball’). We also underline the importance of - otherwise disregarded - outliers in a data set that is of a therapeutic nature.

Adhesion systems are very important in robots for infrastructure inspection (especially in vertical walls). They present the challenge of optimizing the ratio vacuum/power consumption in battery-powered robots. In this paper a CFD (Computer Fluid Dynamics) modelling and optimization process of a robot adhesion system is carried out to determine the best performing configuration in terms of vacuum and power consumption. Analytical and numerical models were developed to predict the behaviour of the system for different configurations. The models were validated, using test rig measurements, by calibrating an arbitrary defined inlet height that simulates the leakage flow. Then, different geometric parameters were varied to determine the best performing configuration based on the vacuum/power consumption ratio value. The model presented in the paper was capable of predicting the behaviour of the system for different configurations, with a margin of error of 15% for the vacuum prediction and a 25% for the motor power calculation. Finally, the model was used to optimize parameters of the system, like the number of blades of the impeller. The adhesion system was conceived for the modular autonomous climbing legged robot ROMERIN.

The quasi-experimental study examines the role of contemporary technologies, such as artificial intelligence and humanoid robots, in enhancing sustainability education for future teachers, emphasizing their impact on shaping sustainable beliefs in future generations. Involving 112 pre-service teachers, the research compares various contemporary and traditional learning methods. Pre- and post-test evaluations were conducted to assess changes in participants’ understanding of sustainability concepts and the variability of their responses. Results reveal significant improvements in sustainability awareness, with methods involving humanoid robots showing higher response variability. The study also identifies the development of new literacies crucial for effectively utilizing advanced technologies in promoting environmental sustainability. While artificial intelligence and humanoid robots match the efficacy of traditional methods, they notably engage young educators more effectively in sustainability topics. These findings highlight the need to integrate such technologies into educational framework to deepen the understanding of environmental issues and prepare youth for future challenges. However, further research is required to explore long-term effects and broader demographics. The research contributes significantly to educational technology and sustainability in education, showcasing the transformative potential of incorporating contemporary technologies in educational settings.

Scientific research in the study of Human-Robot Interactions (HRI) has advanced significantly in recent years. Social humanoid robots have undergone severe testing and have been implemented in a variety of settings, including educational institutions, healthcare facilities and senior care centers. Humanoid robots have also been evaluated across diverse population groups. However, the research on different children-groups is still scarce, especially deaf children. This feasibility study includes both hearing children and deaf children, and aim to assess the interaction between children and a humanoid robot without the use of sounds and voices. In addition, an experiment was conducted where the children were asked to watch a video and then assess whether the NAO humanoid robot responded to the emotions shown in the video in a congruent or incongruent way. The findings indicated that there was no difference between the children who were present-ed with congruent emotions in the NAO as opposed to the children who were presented with in-congruent emotions in the robot. Only the ability to predict emotion in videos and gender were significant predictors of guessing the correct emotion in robot. Although no significantly differ-ence was found between hearing and deaf children, this feasibility study is intended to lay the groundwork for future research in this unexplored field of study.

Obstacle-avoidance robots have become an essential field of study in recent years. This paper analyzes two cases that extend reactive systems focused on obstacle detection and its avoidance. The scenarios explored get data from their environments through sensors and generate information for the models based on artificial intelligence to obtain a reactive decision. The main contribution is focused on the discussion of aspects that allow comparing both approaches, such as the heuristic approach implemented, requirements, restrictions, response time, and performance. The first case presents a mobile robot that applies fuzzy logic to achieve soft turning basing its decision on depth image information. The second case introduces a mobile robot based on multi-layer perceptron and ultrasonic sensors to decide how to move in an uncontrolled environment. The analysis of both options offers perspectives to choose between reactive obstacle-avoidance systems based on ultrasonic or Kinect sensors, models that infer optimal decisions applying fuzzy logic or artificial neural networks, with key elements and methods to design mobile robots with wheels. Therefore, we show how AI or Fuzzy Logic techniques allow us to design mobile robots that learn from their “ experience ” by making them safe and adjustable for new tasks, unlike traditional robots that use large programs to perform a specific task.

This study presents a modest attempt to interpret, formulate, and manipulate emotion of robots within the precepts of quantum mechanics. Our proposed framework encodes the emotion information as a superposition state whilst unitary operators are used to manipulate the transition of the emotion states which are recovered via appropriate quantum measurement operations. The framework described provides essential steps towards exploiting the potency of quantum mechanics in a quantum affective computing paradigm. Further, the emotions of multi-robots in a specified communication scenario are fused using quantum entanglement thereby reducing the number of qubits required to capture the emotion states of all the robots in the environment, and fewer quantum gates are needed to transform the emotion of all or part of the robots from one state to another. In addition to the mathematical rigours expected of the proposed framework, we present a few simulation-based demonstrations to illustrate its feasibility and effectiveness. This exposition is an important step in the transition of formulations of emotional intelligence to the quantum era.

In the last decade, the objectives outlined by the needs of personal robotics have led to the rise of new biologically-inspired techniques for arm motion planning. This paper presents a literature review of the most recent research on the generation of human-like arm movements in humanoid and manipulation robotic systems. Search methods and inclusion criteria are described. The studies are analysed taking into consideration the sources of publication, the experimental settings, the type of movements, the technical approach, and the human motor principles that have been used to inspire and assess human-likeness. Results show that there is a strong focus on the generation of single-arm reaching movements and biomimetic-based methods. However, there has been poor attention to manipulation, obstacle-avoidance mechanisms, and dual-arm motion generation. For these reasons, human-like arm motion generation may not fully respect human behavioural and neurological key features and may result restricted to specific tasks of human-robot interaction. Limitations and challenges are discussed to provide meaningful directions for future investigations.

As a stimulus signal, coded electrical signals can control the motion behavior of animals, which has been widely used in the field of animal robots. In current research, most of the stimulus signals used by researchers are traditional waveform, such as square waves. To enrich the stimulus waveform, a wireless animal robot stimulation system based on neuronal electrical signal characteristics is presented in this paper. The stimulator uses the CC1101 wireless module to control animal behavior through brain stimulation. The LabVIEW-based graphical user interface(GUI) can manipulate brain stimulation remotely while the stimulator powered by battery. Additionally, the spikes of animals have been simulated by this system through Direct Digital Synthesizer(DDS) algorithm. The GUI enable users to customize the combination of these analog spike signals. The recombined signals are sent to the stimulator through CC1101 as stimulus signals. In vivo experiments conducted on five pigeons verified the efficacy of the stimulation mechanism. The analog spike signal with an amplitude of 3-5V successfully caused the pigeon’s turning behavior. The feasibility of the analog spike signals as stimulus signals was successfully verified. Increased the diversity of stimulus waveform in the field of animal robots.

Of course, now we know that quantum mechanics has been a fundamental structure of our world since our universe came into being. However, it has been only a century since the experimental and theoretical discovery of quantum mechanics and its extensions into many implications and applications. In particular, there are implications across many disciplines that most likely will affect education, health, security, etc. Examples are given of the need for starting education as early as possible in schools, the use of nano-robots to deliver drugs targeted to specific molecular sites, to developing new cryptographic systems to safeguard our privacy.

Many ethical issues arise when robots are introduced into elder-care settings. When ethically charged situations occur, robots ought to be able to handle them appropriately. Some experimental approaches use (top-down) moral generalist approaches, like Deontology and Utilitarianism, to implement ethical decision-making. Others have advocated the use of bottom-up approaches, such as learning algorithms, to learn ethical patterns from human behaviour. Both approaches have their shortcomings when it comes to real-world implementations. Human beings have been observed to use a hybrid form of ethical reasoning called Pro-Social Rule Bending, where top-down rules and constraints broadly apply, but in particular situations, certain rules are temporarily bent. This paper reports on implementing such a hybrid ethical reasoning approach in elder-care robots. We show through simulation studies that it leads to better upholding of human values such as autonomy, whilst not sacrificing beneficence.

Collaborative robots have experienced low acceptance in applications, especially in industry. 1 This fact has attracted the attention of researchers and practitioners, who point to different causes 2 for this low acceptance. One of the main reasons is the difficulty in converging on suitable methods 3 for modeling collaborative interactions between robots and their surrounding context during the 4 requirements phase. These interactions must be elicited and modeled during requirements modeling 5 to maximize value creation through collaboration and must be formally verified, taking into account 6 the risks of human-robot interaction. However, such modeling is often not present in collaborative 7 robot design, and the choice of an appropriate approach remains an open problem. In this paper, 8 this problem is addressed from a requirements engineering perspective, a goal-oriented model and 9 a service-based approach supported by an additional verification method based on Petri nets is 10 proposed. A case study based on collaborative robots used in a hospital environment is presented.

COVID-19 may not be a ‘youth disease’ but nevertheless impacts the life of young people dramatically, loneliness and negative mood being an unexpected additional pandemic. Many young people rely on social media for their feeling of connectedness with others. However, social media are suggested to have many negative effects on people’s anxiety. Instead of self-disclosing to others, design may develop alternatives to employ social robots for self-disclosure. In a follow-up on Duan et al. (2021), we report on a lab experiment of self-disclosing negative emotions to a social-media group as compared to writing a conventional diary journal or to talk to an AI-driven social robot after negative mood induction (i.e. viewing shocking earthquake footage). Participants benefitted the most from talking to a robot rather than from writing a journal page or sharing their feelings on social media. Self-disclosure on social media or writing a journal page did not differ significantly. In the design of interventions for mental well-being, human helpers thus far took center stage. Based on our results, we propose design alternatives for an empathic smart-home, featuring social robots and chatbots for alleviating stress and anxiety: a social-media interference chatbot, smart watch plus speaker, and a mirror for self-reflection.

The cooperation between humans and robots is becoming increasingly important in our society. Consequently, there is a growing interest in the development of models that can enhance the interaction between humans and robots. A key challenge in the Human-Robot Interaction (HRI) field is to provide robots with cognitive and affective capabilities, developing architectures that let them establish empathetic relationships with users. Several models have been proposed in recent years to solve this open-challenge. This work provides a survey of the most relevant attempts/works. In details, it offers an overview of the architectures present in literature focusing on three specific aspects of HRI: the development of adaptive behavioural models, the design of cognitive architectures, and the ability to establish empathy with the user. The research was conducted within two databases: Scopus and Web of Science. Accurate exclusion criteria were applied to screen the 1007 articles found (at the end 30 articles were selected). For each work, an evaluation of the model is made. Pros and cons of each work are detailed by analysing the aspects that can be improved so that an enjoyable interaction between robots and users can be established.

Controlling robots in space with necessarily low material and structural stiffness is quite challenging at least in part due to the resulting very low structural resonant frequencies. The frequencies are sometimes so low, the vary act of controlling the robot with medium or high bandwidth controllers lead to excitation of resonant vibrations. Biomimetics or biomimicry emulates models, systems, and elements of nature for solving such complex problems. Recent seminal publications have re-introduced the viability of optimal command shaping, and one recent instantiation mimics baseball pitching to propose control of highly flexible space robots. The readership will find a perhaps dizzying array of thirteen decently performing alternatives in the literature but could be left bereft selecting a method(s) deemed to be best suited for a particular application. Bio–inspired control of space robotics is presented in a quite substantial (perhaps not comprehensive) comparison, and the conclusions of the study indicate the top three performing methods based on minimizing control effort (i.e., fuel) usage, tracking error mean, and tracking error deviation include.

An early hypothesis in robot-assisted stroke therapy was that sensorimotor stimulation through robotic assistance is beneficial for recovery. Despite 25 years of upper-limb rehabilitation robotics research, this hypothesis remains untested barring a few studies with small sample sizes. This review aims to provide a critical summary of the current state of this hypothesis by collating evidence from rehabilitation robotics and other related therapeutic approaches. The review starts with a causal model to expose the various direct and indirect routes through which robotic assistance can aid sensorimotor recovery. The indirect routes include the influence of robotic assistance on therapy intensity, patient motivation, and active participation. The direct route is through changes in cortical networks through Hebbian(-like) learning and changes in peripheral tissue properties. There is currently mixed evidence for the direct causal effect of robotic assistance on recovery from the upper-limb rehabilitation robotics literature. However, evidence from the neuromuscular electrical stimulation literature provides some support for this causal role. Based on the data at hand, we hypothesize that the enhanced movement-related sensory feedback from robotic assistance has a direct, possibly small, causal role in the sensorimotor recovery of the upper-limb, and this effect might be detectable with high-intensity therapy. Large, high-intensity, controlled studies are warranted to support or refute the role of robotic assistance on recovery, which is both scientifically and practically important.

Autonomous weapons systems (AWS), sometimes referred to as “killer robots”, are receiving evermore attention, both in public discourse as well as by scholars and policymakers. Much of this interest is connected with emerging ethical and legal problems linked to increasing autonomy in weapons systems, but there is a general underappreciation for the ways in which existing law might impact on these new technologies. In this paper, we argue that as AWS become more sophisticated and increasingly more capable than flesh-and-blood soldiers, it will increasingly be the case that such soldiers are “in the power” of those AWS which fight against them. This implies that such soldiers ought to be considered hors de combat, and not targeted. In arguing for this point, we draw out a broader conclusion regarding hors de combat status, namely that it must be viewed contextually, with close reference to the capabilities of combatants on both sides of any discreet engagement. Given this point, and the fact that AWS may come in many shapes and sizes, and can be made for many different missions, we argue that each particular AWS will likely need its own standard for when enemy soldiers are deemed hors de combat. We conclude by examining how these nuanced views of hors de combat status might impact on meaningful human control of AWS.

We first review the literature on machine behavior which may contain the interaction between machines, and then discuss the methodology and the related case involving collaboration between robots to instantiate the concept with AI empowerment. The navigation case aims to a security application with autonomous control and roadside agent embedded in a mobile edge computing structure. In the studied navigation based on the artificial potential field method, robots need to use position information to calculate the moving direction frequently. In the case of high motion speed as well as GPS positioning error, the path trajectory may show a sharp change of direction. In order to mitigate the trajectory oscillation, this paper proposes a path planning design where training process and motion direction prediction are integrated by using artificial neural network. The auxiliary navigation agent near multiple obstacles can first extract the past movement information of the robot and then determines whether there is a serious path jitter event. Computer simulation analysis shows that the combination of autonomous control and cooperative behavior can effectively reduce the path jitter so as to achieve a fast and safe path planning.

Classically the walk in biped robotics was obtained controlling balance during the whole step, i.e. guaranteeing that the pressure point under the soles always stayed in the polygon of the supporting feet. However, this assumed that the feet were able to transfer torque to the ground during the whole gait cycle. In spite of the fact that the amount of transferrable torque in the feet-ground contact is limited, it is possible only during some phases of the step, and the overall process is energetically inefficient. On the other side, starting from the passive motion of the rimless wheel falling on an inclined surface, and ending to the inverted pendulum with a compass, balance in the whole was proven in spite of dynamical instability inside each step. Along this line results of Foot Placement Estimation (FPE) in 2-D and 3-D showed how energy efficient walk was possible, emulating the human walk with a free fall on the swing foot and energy restitution at the foot collision with the ground for the next step. This model assumes pointy feet, so without torque transfer to the ground. In the realm of FPE, in previous papers the present author adopted the 3-D inverted pendulum in polar coordinates (Spherical Inverted Pendulum - SIP) to introduce omnidirectional walks with arbitrarily changing characteristics. No torque control was used during the step, i.e the pendulum was always in free fall at each step, the only control actions were at the beginning of the next step. These actions are: the change of angular velocities at the start of a new step, with respect to those given after the collision (emulating the torque action in the brief double stance period), to recover for the losses, and the preparation of the position in the frontal and sagittal planes of the swing foot for the next collision. The present paper improves this paradigm, proposing a general model to account for all characteristics of the biped and of the gait, with adding a minimum of dynamical complexity with respect to the SIP. This model allows, not only to walk omnidirectionally on a flat surface, but also to go up and down staircases.

This study introduces a fruit harvesting mechanism powered by a single motor, designed for integration with unmanned aerial vehicles (UAVs). The mechanism performs reciprocating motion by converting linear motion into rotational motion. Consequently, the end-effector can execute multi-dimensional kinematic trajectories, including biaxial and rotational movements, synchronized with the motor's position. These axial and rotational motions facilitate the gripper's ability to reach, retrieve, and detach fruit from branches during the harvesting process. Notably, a critical consideration in designing this fruit harvesting mechanism is to generate the necessary torque at the end-effector while minimizing reaction forces and torque that could destabilize the UAV during flight. With these considerations in mind, this preliminary study aimed to harvest a Fuji apple and conducted dynamic analysis. We constructed a prototype of the single motor-driven fruit harvesting mechanism using a suitable servo motor. To assess its mechanical performance and evaluate its impact on the hexacopter, we developed both a specific test platform featuring a six-spherical-prismatic-spherical parallel structure and a virtual environmental flight simulator. Overall, the results demonstrate the successful harvesting of a Fuji apple weighing approximately 300 g by the single motor-driven fruit harvesting mechanism, with no adverse effects observed on the hexacopter's operation.

In the paper we suggest an implementation of the non-commutative logic and apply its operators for decision-making in the group of autonomous agents. The suggested operators extend the uninorm and absorbing norm aggregators and use an additional asymmetry parameter that defines the “level of non-commutativity”. The value of this parameter is specified using the perception bias of humans measured in the experiments. The suggested operators and decision-making method are illustrated by simulated behavior of mobile robots in the group.

Mobile robots can perform tasks on the move, including exploring terrain, discovering landmark features or moving a load from one place to another. This group of robots is characterized by a certain level of intelligence allowing making decisions and responding to stimuli received from the environment. As part of Industry 5.0, such mobile robots and humans are expected to co-exist and work together in a shared environment to make human work less tiring, quicker, and safer. This can only be realized when clean, dense, and economical energy sources are available. The aim of the study is to analyze the state of the art and to identify the most important directions for future developments in robotic power systems based mainly on batteries. The efficiency and performance of the battery depends on the design using different materials. Work environments and performance requirements are considered in this systematic review to classify solutions that help developers choose the best suited power system for specific application. Indirectly, the aim of the work is to generate discussion within the scientific and engineering community. A narrative review of publications from six major bibliographic databases according to preset inclusion criteria was combined with a critical analysis of current and future technologies. The main findings of the review allow answering question what is the role of modern power source technologies, artificial intelligence and ground-breaking research work in global policies related to energy saving, green policies, and sustainable development. The main opportunities and threats are discussed, and a brief feasibility analysis is carried out. Novelty of the article relates not only to the analysis of technologies, but also to approaches and their use under conditions of limited resource availability, when resource usage must be minimized. The article provides an overview of batteries, their specifications, classifications, and their advantages and disadvantages. In addition, we propose: (1) an algorithm for selecting main energy source for robot application, and (2) an algorithm for selecting electrical system power supply. Current mobile robot batteries are, in most cases, their biggest limitation. Progress in batteries development is too slow to catch up with the demand for robot autonomy and range requirements, limiting the development of mobile robots. Further intensive research and implementation work is needed to avoid years of delay in this area.

Since 1974, when Heinz von Foerster made the distinction between “the cybernetics of observed systems” as first-order cybernetics (1oC) and “the cybernetics of observing systems” as second-order cybernetics (2oC), cybernetics has been dominated by this observer-centric paradigm that he claimed cannot be extended meaningfully to a third-order. Rather than attempting to extend his paradigm, we derive an alternative, model-centric paradigm from first principles of regulation that naturally extends to three orders, where the third order is ethical regulation. We thus consider a type of regulator that requires a third model and a third observer: If the third model is a model of acceptable (ethical) situations, then a third observer is a necessary element of the system’s “conscience” that prevents or detects any violations of the model of ethical situations. In this paradigm, the cybernetics of systems that are designed to exhibit ethical behaviour can be characterized as third-order cybernetics (3oC). By being able to extend the paradigm to include ethical systems, the model-centric paradigm brings clarity and utility that is not possible using the philosopher-friendly observer-centric paradigm and its under-specified (abstract) observers. Finally new definitions for cybernetics are proposed that clearly differentiate between the science and the philosophy, of cybernetics.

Cloud robotics is becoming an alternative to support advanced services of robots with low computing power as network technology advances. Recently, fog robotics has gained attention since the approach has merit relieving latency and security issues over the conventional cloud robotics. In this paper, a Function-as-a-Service based Fog Robotic (FaaS-FR) for cognitive robots is proposed. The model distributes the cognitive functions according to the computational power, latency and security with a public robot cloud and fog robot server. During the experiment with a Raspberry Pi as an edge, the proposed FaaS-FR model shows efficient and practical performance in the proper distribution of the computational work of the cognitive system.

This study presents a literature review focused on nonverbal communication in human-robot interaction (HRI) that involves service robots with social capabilities. We aim to list the types of robots used and nonverbal communication cues examined in the reviewed studies; and the main research objectives, participant characteristics, data collection methods, and primary findings of these studies. To achieve this, we conducted a literature review of 39 relevant open access academic papers published from 2006 to 2023 that examined the utilization of nonverbal cues by both humans and robots during HRI. The results suggest that enhancing the quality of communication between humans and service robots must be improved, while there are several aspects that require more thorough exploring, needed to strengthen robot self-efficacy, trust and trustworthiness in HRI or overcome cultural differences. The results emphasize the importance of nonverbal communication in shaping the dynamics of interactions between humans and service robots.

Transportation tasks in nursing are common and shorten the time for direct patient care in times of nursing shortage and an aging society. There is a lack of research on transportation needs, with most studies focusing on overall nursing task analysis without a deeper analysis of transportation tasks. In July and September 2023, we conducted weekly observations of nurses to assess clinical transportation needs. We aim to understand the economic impact and the methods nurses use for transportation tasks. We conducted a participant observation using a standardized app-based form over a seven-day observation period in two rural clinics. N=1,830 transports were made by nurses and examined by descriptive analysis. Non-medical supplies account for 27.05 % (n=495) of all transports, followed by medical supplies at 17.32 % (n=317), pharmacotherapy at 14.10 % (n=258) and other other categories like meals or drinks contributing 12.68 % (n=232). Most transports had a factual transport time of under a minute, with patient transport and lab samples displaying more variability. In total, 77.15 % of all transports were made by hand. Requirements to collect items or connect transports with patient care were included in 5 % of all transports. Our economic evaluation spotlighted meals as the most costly transport, with 9,596.16€ p.a. in the observed clinics. Budget-friendly robots would amortize over one year by transporting meals. We support understanding nurses’ transportation needs via further research on assistive robots to validate our findings and determine the feasibility of transport robots.

Aiming at effectively generating safe and reliable motion paths for quadruped robots, a hierar-chical path planning approach driven by dynamic 3D point cloud is proposed in this article. The developed path planning model is essentially constituted of two layers: global path planning layer and local path planning layer. At the global path planning layer, a new method is proposed for calculating terrain potential field based on point cloud height segmentation. Variable step size is employed to improve the path smoothness. At the local path planning layer, a real-time prediction method for potential collision area and a strategy for temporary target point selection is developed. Quadruped robot experiments were carried out in an outdoor complex environment. The experi-mental results verified that, for global path planning, the smoothness of the path is improved and the complexity of the passing ground is reduced. The effective step size is increased by a maxi-mum of 13.4 times, and the number of iterations is decreased by up to 1/6, compared with the traditional fixed step size planning algorithm. For local path planning, the path length is short-ened by 20%, more efficient dynamic obstacle avoidance and more stable velocity planning are achieved by using the improved dynamic window approach (DWA).

Dams are a critical infrastructure system for many communities, but they are also one of the most challenging to inspect. Dams are typically very large and complex structures, and the result is that inspections are often time-intensive and require expensive, specialized equipment and training to provide inspectors with comprehensive access to the structure. The scale and nature of dam inspections also introduces additional safety risks to the inspectors. Unmanned aerial vehicles (UAV) have the potential to address many of these challenges, particularly when used as a data acquisition platform for photogrammetric three-dimensional (3D) reconstruction and analysis, though the nature of both UAV and modern photogrammetric methods necessitates careful planning and coordination for integration. This paper presents a case study on one such integration at the Brighton Dam, a large-scale concrete gravity dam in Maryland, USA. A combination of multiple UAV platforms and multi-scale photogrammetry was used to create two comprehensive and high-resolution 3D point clouds of the dam and surrounding environment at intervals. These models were then assessed for their overall quality, as well as their ability to resolve flaws and defects that were artificially applied to the structure between inspection intervals. The results indicate that the integrated process is capable of generating models that accurately render a variety of defect types with sub-millimeter accuracy. Recommendations for mission planning and imaging specifications are provided as well.

The oil and gas industry faces increasing pressure to remove people from dangerous offshore environments. Robots present a cost-effective and safe method for inspection, repair and maintenance of topside and marine offshore infrastructure. In this work, we introduce a new immobile multi-sensing robot, the Limpet, which is designed to be low-cost and highly manufacturable, and thus can be deployed in huge collectives for monitoring offshore platforms. The Limpet can be considered an instrument, where in abstract terms, an instrument is a device that transforms a physical variable of interest (measurand) into a form that is suitable for recording (measurement). The Limpet is designed to be part of the ORCA (Offshore Robotics for Certification of Assets) Hub System, which consists of the offshore assets and all the robots (UAVs, drones, mobile legged robots etc.) interacting with them. The Limpet comprises the sensing aspect of the ORCA Hub System. We integrated the Limpet with Robot Operating System (ROS), which allows it to interact with other robots in the ORCA Hub System. In this work, we demonstrate how the Limpet can be used to achieve real-time condition monitoring for offshore structures, by combining remote sensing with signal processing techniques. We show an example of this approach for monitoring offshore wind turbines. We demonstrate the use of four different communication systems (WiFi, serial, LoRa and optical communication) for the condition monitoring process. By processing the sensor data on-board, we reduce the information density of our transmissions, which allows us to substitute short-range high-bandwidth communication systems with low-bandwidth long-range communication systems. We train our classifier offline and transfer its parameters to the Limpet for online classification, where it makes an autonomous decision based on the condition of the monitored structure.

This manuscript compares deterministic artificial intelligence to model following control applied to DC motor control, including evaluation of the threshold computation rate to let unmanned underwater vehicles correctly follow the challenging discontinuous square wave command signal. The approaches presented in the main text are validated in MATLAB®, where the motor process is discretized at multiple step sizes, which is inversely proportional to the computation rate. The performance is evaluated by the error mean and standard deviation. With a large step size, discrete deterministic artificial intelligence shows a larger error mean than the model-following self-turning regulator approach (benchmark selection). However, the performance gets optimized with the step size decreased. The error mean is close to the continuous deterministic artificial intelligence when the step size is reduced to 0.2 seconds, which means that the computation rate and the sampling period restrict discrete deterministic artificial intelligence. In that case, the continuous deterministic artificial intelligence is the most feasible and reliable selection for future applications on unmanned underwater vehicles since it is superior to all the approaches with multiple computation rates.

This study explores the integration of Artificial Intelligence (AI) and collaborative robotics in industrial surface finishing, focusing on feature detection on object reflective surfaces using neural networks in computationally constrained environments. Central to this investigation is the utilization of cameras considered as sensors that can capture detailed images of reflective surfaces. These images are then analyzed by a custom neural network, demonstrating the feasibility of feature detection with non-powerful computers. The public dataset for recognizing light reflection defects, available in the SPADD repository, supports this approach. Employing open-source tools like Darknet YOLOv3 and Yolo\_mark, this method proves particularly advantageous for small and medium-sized enterprises (SMEs) due to its low cost and maintenance requirements. This research highlights the challenges of AI and collaborative robotics in industrial applications, especially in adapting to varying conditions and the need for continuous training with new data coming from several sensors. Looking ahead, plans are in place to integrate this system with cobot-assisted polishing tasks, using cameras to enhance manufacturing efficiency and quality. This work contributes to the broader understanding of practical applications of AI in industrial automation, surface finishing processes, and the effective use of sensor technology.