Identifying productive, profitable and less risky cropping systems is important for sustaining farm-based livelihoods in the context of climatic uncertainties and market volatility in many developing nations. Reductionist field crop research identifies the best-bet solutions based on treatment replicates at a single point in time, which may not account for price instability under climatic uncertainties and volatile markets. Keeping this in mind, we estimated productivity, profitability and weather-related risk from eleven different rice-based cropping systems (eight existing and three potential systems) in the coastal region of West Bengal, India. Information on the crop management practices, yield and prices of the component crops of these eleven cropping systems, under ’best,’ ’normal’ and ‘worst’ situations (scenario), were collected through a ques-tionnaire survey on50 farms of Gosaba Block, West Bengal, India. Irrespective of the scenarios, the rice-lathyrus systems, followed by rice-onion and rice-lentil systems recorded the lowest rice-equivalent yields and system yields. However, the highest rice-equivalent yields and system yields were recorded for rice-chilli systems, followed by rice-tomato and rice-potato-green gram systems. Per hectare total paid-out cost (TPC) of rice-tomato systems was higher, followed by rice-chilli, rice-potato-green gram and rice-potato systems. However, irrespective of seasonal conditions (best, normal and worst), rice-chilli systems gave a higher net return followed by rice-tomato and rice-potato-green gram systems. The rice-fallow system recorded the lowest value for both parameters. Under the worst seasonal conditions, the rice-onion system gave a negative net return. Under all the scenarios, the highest B:C ratio was observed for rice-chilli, rice-tomato, rice-potato-green gram and rice-potato systems. The cumulative probability distribution of the rice-tomato system showed first-degree stochastic dominance over other systems and the rice-chilli system showed second-degree stochastic dominance over the rest of the systems. Only the rice-onion system had a small chance (< 1%) of a negative net return, while the rest of the cropping systems were highly likely to get a positive net return. Taking productivity, economics, and risk assessment of different rice-based systems into account, rice-vegetable systems, especially rice-tomato and rice-chilli among the existing systems and rice-potato-green gram system among the potential systems, can be recommended for sustainable intensification in these coastal saline tracts of the region. We also discuss additional socio-economic factors explored by in-depth in-terviews with the farmers, which might influence the adoption and upscaling of these cropping systems in the region.

The impact of long-term soil and crop management practices on soil biological and chemical properties in oilseed brassica-based production systems were deliberated for holistic soil health improvement in the present study. Different tillage, crop residue re-cycling and cropping systems were studied for 5-years in 0-15 and 15-30 cm soil profiles. No-till permanent beds with crop residue (PB+R) noticeably improved soil organic carbon (SOC), microbial biomass carbon (MBC), enzymes [dehydrogenase (DHA) and alkaline phosphatase (AlP)], nitrogen fractions (available, nitrate and total), and available phosphorus and potassium content in both the soil layers compared to conventional tillage without crop residues. Though, the plow soil layer (0-15 cm) showed higher concentration of soil carbon, enzymes, N fractions and available P than in the sub soil (15-30 cm). The dynamic soil biological and chemical properties were also varied with the crop stage, and recorded higher MBC at 30 days, SOC and enzymatic activities at 60 days, and N fractions and available P and K at harvest of mustard crop. Green gram-mustard rotation showed higher values of biological and chemical parameters. Thus, the legume-based mustard crop rotation following no-till permanent beds and residue re-cycling found holistic in improving soil health, and nutrient cycling.

Dynamic virtual testing by Hardware in the Loop (HIL) real time simulation systems is common to minimize physical tests to validate and verify control algorithms, logics and software, under normal and emergency conditions. The accurate but costly HIL models setup activities could have an extended use to simulate faulty conditions that are seldom observable in the real system, yet they must be detected in advance and recognized. Data driven diagnostic methods have reached a mature development, in various sectors, proving effective in early detecting slowly varying deviations from nominal patterns of signals, even without a priori knowledge of their nature and behavior. These methods rely on vast amount of data logged from real systems that are ever and ever richer of monitoring telemetries that are worth being exploited. However, due to the usually reliable and safe systems being managed, it is often difficult to collect enough data on anomalous situations to validate fault detection and isolation and limit false positives. HIL model-based simulations allow generating and observing operational domains or transients rarely observed in real operations. This allows identifying the signals that are most correlated to faults and that could be selected to setup data-based diagnostic models of parts or subsystems, which are more suitable than the whole HIL model for online diagnostics, as well as to identify the features and trends that are most symptomatic of anomalous conditions.

System-of-systems (SoS) evolution is a complex and unpredictable process. Although various principles to facilitate collaborative SoS evolution have been proposed, there is a lack of experimental data validating their effectiveness. To address these issues, we present an Agent-Based Model (ABM) for SoS evolution in the Internet of Vehicles (IoV) , serving as a quantitative analysis tool for SoS research. By integrating multiple complex and rational behaviors of individuals, we aim to simulate real-world scenarios as accurately as possible. To simulate the SoS evolution process, our model employs multiple agents with autonomous interactions and incorporates external environmental variables. Furthermore, we propose three evaluation metrics: evolutionary time, degree of variation, and evolutionary cost, to assess the performance of SoS evolution. Our study demonstrates that enhanced information transparency significantly improves the evolutionary performance of distributed SoS. Conversely, the adoption of uniform standards only brings limited performance enhancement to distributed SoSs. Although our proposed model has limitations, it stands out from other approaches that utilize Agent-Based Modeling to analyze SoS theories. Our model focuses on realistic problem contexts and simulates realistic interaction behaviors. This study enhances the comprehension of SoS evolution processes and provides valuable insights for the formulation of effective evolutionary strategies.

The comprehensibility of good predictive models learned from high-dimensional gene expression data is attractive because it can lead to biomarker discovery. Several good classifiers provide comparable predictive performance but differ in their abilities to summarize the observed data. We extend a Bayesian Rule Learning (BRL-GSS) algorithm, previously shown to be a significantly better predictor than other classical approaches in this domain. It searches a space of Bayesian networks using a decision tree representation of its parameters with global constraints, and infers a set of IF-THEN rules. The number of parameters and therefore the number of rules are combinatorial to the number of predictor variables in the model. We relax these global constraints to a more generalizable local structure (BRL-LSS). BRL-LSS entails more parsimonious set of rules because it does not have to generate all combinatorial rules. The search space of local structures is much richer than the space of global structures. We design the BRL-LSS with the same worst-case time-complexity as BRL-GSS while exploring a richer and more complex model space. We measure predictive performance using Area Under the ROC curve (AUC) and Accuracy. We measure model parsimony performance by noting the average number of rules and variables needed to describe the observed data. We evaluate the predictive and parsimony performance of BRL-GSS, BRL-LSS and the state-of-the-art C4.5 decision tree algorithm, across 10-fold cross-validation using ten microarray gene-expression diagnostic datasets. In these experiments, we observe that BRL-LSS is similar to BRL-GSS in terms of predictive performance, while generating a much more parsimonious set of rules to explain the same observed data. BRL-LSS also needs fewer variables than C4.5 to explain the data with similar predictive performance. We also conduct a feasibility study to demonstrate the general applicability of our BRL methods on the newer RNA sequencing gene-expression data.

Considering higher stability and lower cost of nanozymes than native enzymes, the nanozymatic systems had been utilized for several practical application, especially for sensing and detection. Most of common nanozymatic sensors are single-nanozyme based systems, however, recently a new generation of nanozyme-based systems called “multinanozyme system’ was introduced by Hormozi Jangi et al. (2020). Since the first report of multinanozyme systems, several multinaozyme systems have been developed and utilized for highly sensitive and selective sensing aims. The main advantages of multinaozyme systems compared of common nanozymatic sensors are their impact on simultaneous enhancing selectivity and sensitivity of sensor in a well-designed detection process. Since, the principles of design and detection mechanism of this new generation is not well-described in the literature, the aim of this article is the fast review of the principles of design of this new generation of nanozyme-based sensing and detection.

In his Cynefin classification of system behaviours, Snowden (2007), posits that his Simple (Clear ) and even Complicated system categories are sufficiently understandable to be amenable to the traditional methods of system analysis and modelling. Here, relationships between entities in the system are clear and unambiguous and they behave predictably. So, we can build mathematical “models” to describe how the system is expected to function in different situations. Leaving aside his fourth category, Chaotic, as too hard for the moment, this paper focusses on the third category, Complex systems. Yaneer Bar-Yam [1998] defined "complex systems" as systems that "have multiple interacting components, whose collective behaviour cannot be simply inferred from the behaviour of components." So, the traditional system modelling approach of decomposition into components and attempting to build up a picture of system performance from individual pieces, alone, is no longer appropriate for this class. The problem is that most of the methods we currently employ, and particularly the methods that attempt to make the case that these systems are safe, (such as Fault trees, FMEA. and Root Cause Analysis), rely on this decomposition into components and attempt to make the parts more reliable individually. Even the more systemic approaches, such as Reason’s (1990) Swiss Cheese Model, and Leveson’s System Theoretic Analysis (STPA) (2004), encourage adding layers of protection, barriers, strengthened control loops and better safety critical systems, in the hope that they are making the systems safer. But without a valid model to test the effectiveness of these add-ons, we cannot be sure that they will not have an opposite effect, of making the systems even more complex, unreliable and unpredictable. For complex systems, the careful gathering and documentation of system components and their relationships is still a necessary first step, but we need an additional capacity to model these complex systems to test out and prove they work safely and successfully in the real world. (not just draw fixed component relationships as system “models” (wiring diagrams)) In the last 10 years, an original approach developed by Hollnagel, (2012), to model systems as sets of interactive, interdependent “functions”, (abstracted from and independent of component details), has now been developed to the point where it can take the basic data and structures from the current component focussed system engineering “models”, such as MBSE( Goldberg (1994)), and can pull it all together in a dynamic system model from which analysts can discern how it really works in practice, and predict the emergent behaviours characteristic of complex systems. The paper describes how this methodology developed and how it is currently used to model real situations, to analyse incidents and anticipate events.

The software industry has adopted component-based software development (CBSD) to rapidly build and deploy large and complex software systems with significant savings at minimal engineering effort, cost, and time. However, CBSD encounters issues on security trust, mainly with respect to dependability attributes. A system is considered dependable when it can produce the outputs for which it was designed with no adverse effect on its intended environment. Dependability consists of several attributes that imply availability, confidentiality, integrity, reliability, safety, and maintainability. Dependability attributes must be embedded in a CBSD model to develop dependable component software. Motivated by the importance of these attributes, this paper pursues two objectives: to design a model for developing a dependable system that mitigates the vulnerabilities of software components, and to evaluate the proposed model. The model proposed in this study is labelled as developing dependable component-based software (2DCBS). To develop this model, the CBSD architectural phases and processes must be framed and the six dependability attributes embedded according to the best practice method. The expert opinion approach was applied to evaluate 2DCBS framing. In addition, the 2DCBS model was applied to the development of an information communication technology (ICT) portal through an empirical study method. Vulnerability assessment tools (VATs) were employed to verify the dependability attributes of the developed ICT portal. Results show that the 2DCBS model can be adopted to develop web application systems and to mitigate the vulnerabilities of the developed systems. This study contributes to CBSD and facilitates the specification and evaluation of dependability attributes throughout model development. Furthermore, the reliability of the dependable model can increase confidence in the use of CBSD for industries.

Rice (Oryza sativa L.) processing yields ~60 million metric tons of bran annually. Rice genes producing bran metabolites of nutritional and human health importance were assessed across 17 diverse cultivars from seven countries using non-targeted metabolomics and resulted in 378-430 metabolites. Gambiaka cultivar had the highest number and Njavara had the lowest number of metabolites. The 71 rice bran compounds of significant variation by cultivar included 21 amino acids, seven carbohydrates, two metabolites from cofactors and vitamins, 33 lipids, six nucleotides, and two secondary metabolites. Tryptophan, -ketoglutarate, γ-tocopherol/β-tocopherol and γ-tocotrienol are example bran metabolites with extensive cultivar variation and genetic information. 34 rice bran components that varied between cultivars linked to 535 putative biosynthetic genes using to the OryzaCyc 4.0, Plant Metabolic Network database. Rice genes responsible for bran composition with animal and human health importance is available for rice breeding programs to utilize in crop improvement.

In recent years, the field of drug delivery has seen a significant shift towards the exploration and utilisation of nanoparticles (NPs) as versatile carriers for therapeutic agents. With its ability to provide exact control over NPs' characteristics, microfluidics has emerged as a potent platform for the efficient and controlled synthesis of NPs. Microfluidic devices designed for precise fluid ma-nipulation at the micro-scale offer a unique platform for tailoring NP properties, enabling en-hanced control over NP properties such as size, morphology and size distribution while ensuring high batch-to-batch reproducibility. Microfluidics can be used to produce liposomes, solid lipid nanoparticles, polymer-based NPs and lipid-polymer hybrid NPs, as well as a variety of inorganic NPs such as silica, metal, metal oxide, quantum dots and carbon-based NPs, offering precise control over composition and surface properties. Its unique precision in tailoring NP properties holds great promise for advancing NP-based drug delivery systems in both clinical and industrial set-tings. Although challenges with large-scale production still remain, microfluidics offers a trans-formative approach to NP synthesis. In this review, starting from the historical development of microfluidic systems, the materials used to create the systems, microfabrication methods and system components will be discussed in order to provide the reader with an overview of micro-fluidic systems. In the following, studies on the fabrication of nanoparticles such as lipid NPs, polymeric NPs and inorganic NPs in microfluidic devices are included.

The genetic potentials of rice cultivars will need to be expressed to their fullest if global rice production is to be expanded enough by 2050 to meet the increased demand of expanding population while the availability of land and water per capita dwindles. New and ‘improved’ rice varieties have contributed greatly to increased production over the past 50 years, but the rate of rice yield increase based on genetic changes has declined in recent decades compared with the early years of the Green Revolution. In fact, many rice consumers continue to prefer to consume ‘traditional’ rice varieties (referred to also as local, native, unimproved, or indigenous) because of their taste, aroma, texture, and other qualities. Further, many farmers prefer to cultivate these varieties because of their better adaptation to local climatic and soil conditions and their evolved resistance to endemic stresses. The practices that comprise the System of Rice Intensification (SRI), including transplanting rice seedlings at a young age, wide spacing between plants, keeping the soil well-aerated rather than inundated, and enhancing soil organic matter, provide traditional rice varieties with micro-environments that are more favorable for the expression of their genetic and agronomic potentials. Interactions among rice plants, soil characteristics, water, energy, and other inputs improve the phenotypic and physiological performance of rice plants. This paper considers how the cultivation of traditional rice varieties with SRI methods can raise yields, reduce farmers’ costs of production, and generate higher incomes, while contributing to the conservation of rice biodiversity.

In order to enhance understanding of RNA-binding proteins in rice, a comprehensive investigation was conducted on the RRM1 gene family of rice, encompassing genome-wide identification and exploration of its role in rice blast resistance. Physical and chemical properties of the OsRRM1 gene family in rice was analyzed, including conserved domain, motif, location information, gene structure, phylogenetic tree, collinearity analysis, cis-acting elements, GO, and KEGG. Furthermore, the expression patterns of the OsRRM1 gene were examined at different time intervals following rice blast treatment. Furthermore, the alterations in expression patterns of selected OsRRM1 genes were assessed using quantitative real-time PCR(qRT-PCR). A total of 212 members of the OsRRM1 gene family were identified, which were dispersed across 12 chromosomes. Many of these genes exhibit multiple exons and introns, all of which encompass the conserved RRM1 domain and share analogous motifs. This observation suggests a high degree of conservation within the encoded sequence domain of these genes. Phylogenetic analysis revealed the existence of five subfamilies within the OsRRM1 gene family. Furthermore, the investigation of the promoter region identified homeopathic elements that are involved in nucleic acid binding and interaction with multiple transcription factors. By employing GO and KEGG analysis, four RRM1 genes were tentatively identified as crucial contributors to plant immunity, while the RRM1 gene family was also found to have a significant involvement in the complex of alternative splicing. Additionally, gene expression analysis indicated that the majority of OsRRM1 genes exhibited constitutive expression. The results of the qRT-PCR analysis revealed distinct temporal changes in the expression pattern of the OsRRM1 gene following rice blast treatment. These findings contribute to the existing knowledge of the OsRRM1 gene family, establish a foundation for further investigation into the role of the OsRRM1 gene in response to rice blast infection, and hold theoretical significance for future studies on the functionality of the OsRRM1 gene.

A significant number and range of challenges besetting sustainability can be traced to the actions and interactions of multiple autonomous agents (people mostly) and the entities they create (e.g., institutions, policies, social network) in the corresponding social-environmental systems (SES). To address these challenges, we need to understand decisions made and actions taken by agents, the outcomes of their actions, including the feedbacks on the corresponding agents and environment. The science of Agent-based Complex Systems—ACS science—has a significant potential to handle such challenges. The advantages of ACS science for sustainability are addressed by way of identifying the key elements and challenges in sustainability science, the generic features of ACS, and the key advances and challenges in modeling ACS. Artificial intelligence and data science promise to improve understanding of agents’ behaviors, detect SES structures, and formulate SES mechanisms.

All solar thermal systems, due to their thermal nature, can be hybridised or operated with both fossil fuel and solar energy. By enhancing availability and dispatch ability, hybridization has the potential to boost the value of concentrating solar thermal technology. Hybrid photovoltaic thermal systems (PV/T) offer a solution to improve on the limited capacity growth seen with standard solar panels. The analysis focuses on the creation of alternative structural and design so-lutions that may be used to boost lacking efficiency that was previously hampered by limited spectrum absorption of sun light. As a result, the spectrum is separated into two spectrum ranges, one that directly matches the bandgap of PV materials and the other that is absorbed for thermal absorption outputs. Most two channel systems are used to capture or reflect sunlight, with the layer specifically located right above the PV cell. Another layer of nanofluid is employed to evacuate heat from the PV cell, acting as the second channel, to specifically eliminate overheating difficulties. To address concerns that have arisen as a result of years of observation, the most recent study involves nano-particle-based fluids employed in PV/T, which uses a cooling medium to provide an alternate heat transfer option. Aside from nanofluids, there are phase change materials, channel alterations that result in a higher flow rate and hence improve overall performance.

Substantial research is required to ensure that micro-mobility ride sharing provides a better fulfillment of user needs. This study proposes a novel crowdsourcing model for the ride-sharing system where light vehicles such as scooters and bikes are crowdsourced. The proposed model consists of three entities: suppliers, customers, and a management party responsible for receiving, renting, booking, and demand matching with offered resources. It can allow suppliers to define the location of their private e-scooters/e-bikes and the period of time they are available for rent. Using a dataset of over 9 million e-scooter trips in Austin, Texas, we ran an agent-based simulation six times using three maximum battery ranges (i.e., 35, 45, and 60 km) and different numbers of e-scooters (e.g., 50 and 100) at each origin. Computational results show that the proposed model is promising and might be advantageous to shift the charging and maintenance efforts to a crowd of suppliers.

This paper presents an approach to the application of the Model-Based Systems Engineering (MBSE) and Model-Based Systems Architecting (MBSA) principles to develop a Model-Based Pattern Language (MBPL). It takes too long for systems engineers and architects to develop a new system from scratch, particularly new space-based systems derived from the existing space systems architectures. A pattern language is a holistic view of reusable logical model artifacts; many are interdisciplinary and introductory, if at all. The results are mostly a combination of the application-specific logical solution, which further results in the best possible overall solution. The main benefit of the pattern language is reducing the time and validation required to generate a new space-based system architecture; this approach will develop top-level requirements in the initial phase of the system development. The rationale of the methodology proposed by the paper is as follows, collect, and decompose published literature and other open-source information available on space system architectures and system models; develop SysML models for systems, subsystems, products, assembly, subassembly level, and mission-specific requirements using CAMEO SysML software. Arrange these patterns to develop a functional ontology and construct a logical architecture pattern library. This approach created, updated, and managed SysML pattern language, which evaluated the expedited new model construction. Again, our objective is to develop a logical pattern language using public domain information and evaluate patterns by constructing a new space mission concept—for example, planetary surface habitat.

A single Information security is of pivotal concern for consistently streaming information over the widespread internetwork. The bottleneck flow of incoming and outgoing data traffic introduces the issue of malicious activities taken place by intruders, hackers and attackers in the form of authenticity desecration, gridlocking data traffic, vandalizing data and crashing the established network. The issue of emerging suspicious activities is managed by the domain of Intrusion Detection Systems (IDS). The IDS consistently monitors the network for identifica-tion of suspicious activities and generates alarm and indication in presence of malicious threats and worms. The performance of IDS is improved by using different signature based machine learning algorithms. In this paper, the performance of IDS model is determined using hybridization of nestrov-accelerated adaptive moment estimation –stochastic gradient descent (HNADAM-SDG) algorithm. The performance of the algorithm is compared with other classi-fication algorithms as logistic regression, ridge classifier and ensemble algorithm by adapting feature selection and optimization techniques

Traditional high pressure mechanical compressors account for over half of the car station’s cost, have insufficient reliability and are not feasible for a large-scale fuel cell market. An alternative technology, employing a two-stage, hybrid system based on electrochemical and metal hydride compression technologies, represents an excellent alternative to conventional compressors. The high-pressure stage, operating at 100-875 bar, is based on a metal hydride thermal system. A techno-economic analysis of the metal hydride system is presented and discussed. A model of the metal hydride system was developed, integrating a lumped parameter mass and energy balance model with an economic model. A novel metal hydride heat exchanger configuration is also presented, based on mini-channel heat transfer systems, allowing for effective high-pressure compression. Several metal hydrides were analyzed and screened, demonstrating that one selected material, namely (Ti_0.97Zr_0.03)_1.1Cr_1.6Mn_0.4, is likely the best candidate material to be employed for high-pressure compressors under the specific conditions. System efficiency and costs were assessed based on the properties of currently available materials at industrial levels. Results show that the system can reach pressures on the order of 875 bar with thermal power provided at approximately 150 °C. The system cost is comparable with the current mechanical compressors and can be reduced in several ways as discussed in the paper.

This study was conducted to search for green technology that can extract metabolites from neem leaves for use in the development of botanical pesticide against Bactrocera dorsalis (Hendel) (Diptera:Tephritidae). Rice wine, rice wash, vinegar and distilled water were used as solvents and hot infusion, maceration, hot continuous reflux (Soxhlet), and fermentation were the methods employed. The different leaf extracts prepared by green technology were evaluated for their potentials as pesticide against B. dorsalis. Vinegar extract via Soxhlet extraction (V-S) for eight (8) h registered to have the highest mortality but not significantly different from vinegar - fermentation (V-F), rice wash - Soxhlet (RWa-S), vinegar - maceration (V-M), distilled water - fermentation (DW-F), and rice wash - fermentation (RWa-F) extracts. Phythochemicals present in the extracts are affected by the solvent-extraction interaction. Among the sixteen solvent-extraction interactions, the use of rice wash and fermentation is the most economical method in extracting the extracting the active components of neem leaves against B. dorsalis. Rice wash is a waste that can be utilized in the development of a biopesticide from neem leaves for pest management of B. dorsalis. This is the first report that rice wash is used as extracting solvent in green synthesis.

A bijective analysis is confirming, the expansion of universal space has never been directly observed, and this assumption is unproven thus far. The measurement of the gravitational redshift, which was confirmed using the Mossbauer experiment, proves only the gravitational redshift and nothing more because there is no causality between the gravitational redshift and hypothetical expansion. Thus, even if the universal space is assumed to expand, the gravitational redshift cannot be assumed to be proof of the expansion. In addition, the Doppler effect was never observed in an expanding space; thus, the claim that the cosmological redshift is partially caused by the Doppler effect, which is caused by the expansion of space, is an unproven assumption. Furthermore, the discovery of cosmic microwave background (CMB) radiation simply proves that the radiation is emitted by the entire universal space, but does not prove the existence of a recombination period. In evidence-based cosmology, every element in the model has a corresponding element in physical reality that is observed and measured. The evidence-based cosmology model is related to the real universe by a bijective function of set theory. Supermassive black holes in the centre of galaxies are rejuvenating systems of the universe. They rotate their local superfluid space which is the physical origin of galactic rotation curves.

Initial evaluations of the System of Rice Intensification in India and elsewhere have mainly fo-cused on its impact on yield and income and have usually covered just one or two seasons. Re-searchers at the ICAR-Indian Institute of Rice Research conducted a more comprehensive evalua-tion of SRI methods over six years (six wet and six dry seasons), comparing these methods with three other rice crop management systems: modified, partially mechanized SRI (MSRI); direct-seeded rice (DSR); and normal transplanting with inundated fields (NTP). SRI grain yield was found to be about 50% higher than with NTP (6.35 t ha-1 vs 4.27 t ha-1), while the MSRI yield was essentially the same (6.34 t ha-1) and 16% higher than with DSR (5.45 t ha-1). Compared to NTP, SRI methods significantly enhanced soil microbial populations over time, bacteria by 12%, fungi by 8%, and actinomycetes by 20%. Indicators of biological activity in the rhizosphere were also higher, dehydrogenase by 8.5% and FDA enzymes by 16%. Glucosidase activity, an indicator of soil organic matter, was 78% higher. Relative to normal transplanting methods, SRI reduced GHG emissions by 21%, while DSR reduced them by 23% and MSRI by 13%, which indicated pos-itive effects of the alternate and improved methods over normal transplanting. Economic analy-sis showed that both gross and net economic returns to be higher with SRI than with MSRI and the other management systems evaluated. While the six-year study documented many ad-vantages of SRI crop management, the MSRI version evaluated is a promising adaptation that provide similar benefits but with lower labor requirements.

The numerical implementation of the controllers allows the use of very complex algorithms with ease. However, in practice, due to its proven advantages, the PID controller (and its variants) is widely used in industrial control systems as well as in many other applications that require continuous control. Most of the methods for tuning the parameters of PID controllers are based on time-invariant linear models of the processes, which in practice can lead to poor performance of the control system. The paper presents an application of reinforcement learning algorithms in tuning of PID controllers for the control of some classes of continuous nonlinear systems. Tuning the parameters of PID controllers is done with the help of Twin Delayed Deep Deterministic Policy Gradients (TD3) algorithm which presents a series of advantages compared to other similar methods from Machine Learning dedicated to continuous state and action spaces. TD3 algorithm is an off-policy Actor-Critic based method and was used as it does not require a system model. The presented technique is applied for control of a biotechnological system which has a strongly nonlinear dynamic. The proposed tuning method is compared to the classical tuning methods of PID controllers. The performance of the tuning method based on the TD3 algorithm is demonstrated through simulation illustrating the effectiveness of the proposed methodology.

The texture properties of cooked rice are a dominant property which can indicate the eating quality. Evaluation of back extrusion (BE) test precision and sensitivity for cooked germinated brown rice (GBR) texture in production process was investigated in this study. BE test on texture properties of cooked GBR rice show high precision of measurement of hardness, toughness and stickiness tests which indicated by the repeatability and reproductivity test but the sensitivity indicated by coefficient of variation of the texture properties. The findings of the study of the effect of different soaking and aging duration in the production of Khao Dawk Mali 105 (KDML 105) GBR on cooked GBR texture measured by BE test confirmed the developed protocol for evaluation of high precision and sensitivity of the texture measurement method. Repeatability and reproducibility of reliable measurements have a low standard deviation of the farthest different between replicates, which is considered high precision. High coefficient of variation where the relative wide variation of the absolute value of the property can be detected indicate high sensitivity which even small resolution can be detected or vice versa. But the correlation coefficient among the texture properties by BE were not related to the precision or sensitivity of the test. By these results, the original protocol for determination of precision and sensitivity of food texture measurement was successfully verified as the usable evaluation protocol for GBR texture measurement.

The efficiency of rice cum fish culture study was conducted in different areas of Tangail district with those farmers who cultivate rice and fish together at a time. The study was conducted along 60 farmers of different areas in Ghatail upazilla. The primary data were collected through face-to-face interviews and secondary data were collected through different reputed journals, newspapers, authentic portals and so on. Data collection was carried out during the period from November 2021 to May 2022. Both tabular and functional analyses were performed to achieve the specific objectives of the study. NPV, BCR and IRR method was used to estimate the profitability and a multiple regression model was used to find out the factors motivating farmers' decision on rice cum fish cultivation. SWOT analysis was done to find out the internal and external-positive and negative factors faced by the farmers in rice cum fish cultivation. About 40% of farmers are under the age of 30 and most of them got at least primary education. Agriculture was the main occupation of the respondents and fish cultivation was the secondary. The highest annual income among the sample growers came from the production of rice cum fish culture. The BCR of the production is upbeat and 2.09 which indicates that the cultivation is profitable.

Background: Previous in vitro and in vivo studies have demonstrated that storage of cooked rice at 4 °C for 24 h and reheating to 65 °C significantly reduced starch digestibility and postprandial glycaemic responses. Moreover, the effect was greater for parboiled rice compared to other rice varieties commonly consumed in New Zealand. This study aimed to evaluate consumer preferences of related sensory attributes and consumer acceptability of several rice varieties freshly cooked or reheated. Method: Sixty-four consumers volunteered and recorded on Visual Analoge Scales their preference and acceptability of freshly prepared or cold-stored and reheated medium grain white, medium grain brown and parboiled rice. Results: All six rice samples were accepted by participants (average 54%). Reheated parboiled rice and reheated medium grain brown rice were both accepted by participants as a preferred staple meal compared to other rice samples. Among all rice samples, the sweetness and the flavour of freshly cooked warm medium-grain white rice were less preferred (scored 42.1% and 45.0% respectively) compared with other samples (P = 0.05). Participants who prepared and consumed brown rice at home regularly (more than 10 times per month), preferred the reheated brown rice (73.8% (67.4, 80.2)) and reheated parboiled rice (74.3% (67.9, 80.7)) (P < 0.001). Conclusions: It is suggested that reheated parboiled rice, with the lowest starch digestibility and glycaemic impact (both in vitro glucose release and in vivo glucose response) could be accepted as a healthier alternative for the daily staple meal.

Cyber-Physical Systems form the new backbone of digital ecosystems. Their design can be coupled with engineering activities to facilitate dynamic adaptation and (re-)configuration. Behavior-oriented technologies enable highly distributed and while coupled operation of systems. Utilizing them for digital twins as self-contained design entities with federation capabilities makes them promising candidates to develop and run highly functional CPS. In this paper we discuss mapping CPS components to behavior-based digital twin constituents mirroring integration and implementation through subject-oriented models. These models, inspired by agent-oriented system thinking can be executed and increase transparency at design and runtime. Patterns recognizing environmental factors and operation details facilitate configuration of CPS. Subject-oriented runtime support enable dynamic adaptation and federated use.

Nanoparticle (NP) transport is increasingly relevant to subsurface engineering applications such as aquifer characterization, fracture electromagnetic imaging and environmental remediation. An efficient field-scale simulation framework is critical for predicting NP performance and designing subsurface applications. In this work, for the first time, a streamline-based model is presented to simulate NP transport in field-scale subsurface systems. It considers a series of behaviors exhibited by engineered nanoparticles (NPs), including time-triggered encapsulation, retention, formation damage effects and variable nanofluid viscosity. The key methods employed by the algorithm are streamline-based simulation (SLS) and an operator-splitting (OS) technique for modeling NP transport. SLS has proven to be efficient for solving transport in large and heterogeneous systems, where the pressure and velocity fields are firstly solved on underlying grids using finite-difference (FD) methods. After tracing streamlines, one-dimensional (1D) NP transport is solved independently along each streamline. The adoption of OS enhances flexibility for the entire solution procedure by allowing different numerical schemes to solve different governing equations efficiently and accurately. For the NP transport model, an explicit FD scheme is used to solve the advection term, an implicit FD scheme is used for the diffusion term and an adaptive numerical integration is used to solve the retention terms. The model is implemented in an in-house streamline-based code, which is verified against analytical solutions, a commercial FD reservoir simulator (ECLIPSE) and an academic FD colloid transport code (MNMs). For a 1D homogeneous case, the effluent breakthrough curves (BTC) produced by the in-house simulator are in good agreement with the analytical solution and MNMs, respectively. For a two-dimensional (2D) heterogeneous case, the BTC and concentration pattern of the in-house simulator all match well with the solution produced by commercial simulator. Simulations on a synthetic three-dimensional (3D) nanocapsule application engineering design case, are performed to investigate the effect of fluid and NP properties on the displacement pattern of an existing subsurface fluid.

Self-adaptive systems are capable of reconfiguring themselves while in use to reduce the risks forced by environments for which they may not have been specifically designed. Run-time validation techniques are required because complex Self-adaptive systems must consistently offer acceptable behavior for important services. The run-time testing can offer further confidence that a Self-adaptive system will continue to act as intended even when operating in unknowable circumstances. This article introduces an evolutionary framework that supports adaptive testing for Self-adaptive systems. To ensure that the adaptive systems continue to operate following its requirements and that both test plans and test cases continuously stay relevant to shifting operational conditions. The proposed approach using the SPEA2 algorithm facilitates both the execution and adaptation of run-time testing operations.

Since smart cities aim at becoming self-monitoring and self-response systems, their deployment relies on close resource monitoring through large-scale urban sensing. The subsequent gathering of massive amounts of data makes essential the development of event filtering mechanisms that enable the selection of what is relevant and trustworthy. Due to the rise of mobile event producers, location information has become a valuable filtering criterion as it not only offers extra information on the event described but also enhances trust on the producer. Implementing mechanisms that validate the quality of location information becomes then imperative. The lack of such strategies in cloud architectures compels the adoption of new communication schemes for IoT-based urban services. To serve the demand for location verification in urban event-based systems (DEBS), we have designed three different fog architectures that combine proximity and cloud communication. Moreover, we have successfully assessed their performance using network simulations with realistic urban traces.

Various renewable energy sources such as wind power and photovoltaic (PV) have been increasingly integrated into the power system through power electronic converters in recent years. However, power electronic converter-driven stability issues under specific circumstances, for instance, modal resonances might deteriorate the dynamic performance of the power systems or even threaten the overall stability. In this paper, the integration impact of a hybrid renewable energy source (HRES) system on modal interaction and converter-driven stability is investigated in an IEEE 16-machine 68-bus power system. Firstly, an HRES system is introduced, which consists of full converter-based wind power generation (FCWG) and full converter-based photovoltaic generation (FCPV). The equivalent dynamic models of FCWG and FCPV are then established, followed by the linearized state-space modeling. On this basis, converter-driven stability analyses are performed to reveal the modal resonance mechanisms of the interconnected power systems and the modal interaction phenomenon. Additionally, time-domain simulations are conducted to verify effectiveness of dynamic models and support the converter-driven stability analysis results. To avoid detrimental modal resonances, an optimization strategy is further proposed by retuning the controller parameters of the HRES system. The overall results demonstrate the modal interaction effect between external AC power system and the HRES system and its various impacts on converter-driven stability.

In an IoT system, the sheer volume of data generated by numerous sensing devices necessitates a well-designed scheme for storing and retrieving data efficiently, enabling streamlined data processing and analytics. One promising storage architecture involves utilizing solid-state drives (SSDs) to cache data from hard disk drives (HDDs), thereby creating an SSD-based caching storage system. To further enhance access performance, it is possible to employ readahead techniques to minimize data access latency. However, the existing Linux readahead scheme falls short in fully leveraging SSD-based caching storage systems. We address this limitation by introducing a novel cross-layered readahead architecture that effectively communicates with the VFS layer, the file system layer, and the block I/O layer. This communication facilitates the acquisition of readahead timing, readahead data continuity, and readahead data location, respectively. To guide prefetching decisions, our architecture analyzes the degree of data access sequentiality, the performance model of the target storage device, and the access patterns of the I/O workload on the corresponding storage device. The implementation of this new architecture in the Linux kernel yields promising experimental results, demonstrating its robustness by consistently outperforming the stock Linux kernel. Notably, our architecture reduces the total execution time of the stock Linux kernel by up to 49%, except in cases of random workloads where both the stock Linux kernel and our architecture exhibit similar performance.

Weeds that infest crops are a primary factor limiting agricultural productivity world-wide. Weedy rice, also called red rice, has experienced independent evolutionary events through gene flow from wild rice relatives and de-domestication from cultivated rice. Each evolutionary event supplied/equipped weedy rice with competitive abilities that allowed it to thrive with cultivated rice and severely reduce yields in rice fields. Under-standing how competitiveness evolves is important not only for noxious agricultural weed management but also for the transfer of weedy rice traits to cultivated rice. Molec-ular studies of weedy rice using simple sequence repeat (SSR), restriction fragment length polymorphism (RFLP) and whole genome sequence have shown great genetic variations in weedy rice population globally. These variations are evident both at whole genome and at single allele level, including Sh4 (shattering), Hd1 (heading and flower-ing), and Rc (pericarp pigmentation). The goal of this review is to describe the genetic diversity of current weedy rice germplasm and the significance of weedy rice germplasm as a novel source of disease resistance. Understanding these variations, es-pecially at an allelic level, is also crucial as individual locus that control important traits can be of great target to rice breeders.

Climate projections show that southern Indonesia such as West Nusa Tenggara is projected to experience a lower precipitation and higher temperatures. To date, research on climate change impact on Indonesian rice production yield is limited. As climate change is projected to decrease rainfall and to increase temperatures, this paper offers a qualitative analysis using system archetypes to understand the impacts of climate change on rice production. Two system archetypes are identified including Limits to Growth and Success to Successful. Both archetypes explain that rice production is hampered by high minimum temperature as photosynthesis output is decreased by increasing respiration. This paper shows that using a simple tool, system archetypes, we can describe the impacts of climate change on rice production. The outputs of this study such as a causal loop diagram and system archetypes can be a basis to develop a simulation model in understanding the impacts of climate change on main crops.

In an increasingly complex world there is a real, urgent need for methodologies to enable engineers to model complex sociotechnical systems, as these now seem to describe the majority of systems in use today. This is of course exacerbated by the increasing involvement and augmentation with “black box” AI contributions. Hollnagel produced a methodology, (FRAM) which did allow the analyst in-sights into these systems’ behaviour, but the model-based system engineering applications demand numbers and a quantitative ap-proach. In the last 10 years, this original approach developed to model systems as sets of interactive, interdependent “functions”, (abstracted from agent or component details), has been further developed to the point where it can take the basic data and structures from the current component focussed system engineering “models”, and can pull it all together into dynamic models, (as opposed to static, fixed System Theoretic Process Accimaps), from which analysts can discern how they really work in practice, and predict the emergent behaviours characteristic of complex systems. This paper describes how the FRAM methodology has now been extended to provide these extra, essential attributes. It also describes its implementation using an open-source software, freely available for use and verification on the GitHub site.

We aim to evaluate efficiency of two American surveillance systems for monitoring the spread of antimicrobial-resistant (AMR) gonorrhea among men who have sex with men (MSM) using the novel continuous-time agent-based model of gonorrhea transmission. The model was developed using the simulation modelling tool AnyLogic and accounts for susceptible and resistant strains of N. gonorrhoeae, symptomatic and asymptomatic infection and various routes of transmission between different anatomical sites. The model was calibrated using a Bayesian calibration approach. The surveillance systems are the Gonococcal Isolate Surveillance Project (GISP) and the enhanced Gonococcal Isolate Surveillance Project (eGISP). We calculated accuracy, sensitivity, specificity and estimation error for each surveillance system based on the number of isolates submitted in 2018. We also varied that number to see its effect on the outcomes. Our results show that the accuracy of eGISP was between 66% and 92%, while GISP demonstrates low accuracy between 44% and 48%. We also determined that increasing the number of isolates results in improved performance for eGISP, while GISP is not particularly sensitive to it.

We introduce the Concept-Model-Graph-View Cycle (CMGVC). The CMGVC facilitates coherent architecture analysis, reasoning, insight, and decision-making based on conceptual models that are transformed into a generic, robust graph data structure (GDS). The GDS is then transformed into multiple views of the model, which inform stakeholders in various ways. This GDS-based approach decouples the view from the model and constitutes a powerful enhancement of model-based systems engineering (MBSE). The CMGVC applies the rigorous foundations of Category Theory, a mathematical framework of representations and transformations. We show that modeling languages are categories, drawing an analogy to programming languages. The CMGVC architecture is superior to direct transformations and language-coupled common representations. We demonstrate the CMGVC to transform a conceptual system architecture model built with the Object Process Modeling Language (OPM) into dual graphs and a stakeholder-informing matrix that stimulates system architecture insight.

Summary: Studying biological systems generally relies on computational modeling and simulation, e.g., for model-driven discovery and hypothesis testing. Progress in standardization efforts led to the development of interrelated file formats to exchange and reuse models in systems biology, such as SBML, the Simulation Experiment Description Markup Language (SED-ML), or the Open Modeling EXchange format (OMEX). Conducting simulation experiments based on these formats requires efficient and reusable implementations to make them accessible to the broader scientific community and to ensure the reproducibility of the results. The Systems Biology Simulation Core Library (SBSCL) provides interpreters and solvers for these standards as a versatile open-source API in Java™. The library simulates even complex bio-models and supports deterministic Ordinary Differential Equations (ODEs); Stochastic Differential Equations (SDEs); constraint-based analyses; recent SBML and SED-ML versions; exchange of results, and visualization of in silico experiments; open modeling exchange formats (COMBINE archives); hierarchically structured models; and compatibility with standard testing systems, including the Systems Biology Test Suite and published models from the BioModels and BiGG databases. Availability and implementation: SBSCL is freely available at https://draeger-lab.github.io/SBSCL/.

Reducing meat consumption is better for the environment. Unfortunately, commercial plant-based meat substitutes are often more expensive than meat and thus have not seen widespread adoption. This paper analyzes commercially-available spirulina, soy, pea, and brown rice protein isolates characteristics to provide data for non-meat protein cost reductions. Thermal and rheological properties, viscosity, density, and particle size distribution are analyzed for further study on alternative protein-based food processing. Differential scanning calorimetry analysis produced dry amorphous-shaped curves and paste curves with a more distinct endothermic peak. Extracted linear temperature ranges for processing in food production for spirulina was 70-90ºC; soy protein was 87-116ºC; pea protein was 67-77ºC; and brown rice protein was 87-97ºC. Viscosity analysis determined each protein material was shear-thinning and that viscosity increased with decreased water concentration, with rice being an exception to the latter trend. The obtained viscosity range for spirulina was 15,100-78,000cP; soy protein was 3,200-80,000cP; pea protein was 1,400-32,700cP; and brown rice protein was 600-3,500cP. The results indicate that extrusion is a viable method for further processing of the protein isolates as this technique has a large temperature operating range and variable screw speed. Data provided here can be used to make single or multi-component protein substitutes.

Rice canopy height and density are directly usable crop phenotypic traits for the direct estimation of crop biomass. Therefore, it is crucial to rapidly and accurately estimate rice canopy phenotypic parameters. To achieve non-destructive detection and estimation of essential phenotypic parameters in rice, a platform based on LiDAR point cloud data for rice phenotypic parameter detection was established. Data collection of rice canopy layers was performed across multiple plots. The LiDAR-detected canopy top point clouds were selected using a method based on the highest percentile, and the rice canopy surface model was calculated. Canopy height estimation was the difference between ground elevation and percentile value. To determine the optimal percentile defining the rice canopy top, testing was conducted incrementally from 0.8 to 1 with an increment of 0.005. The optimal percentile value was found to be 0.975. The root mean square error (RMSE) between LiDAR-detected canopy height and manually measured canopy height was calculated. The prediction model based on canopy height (R2=0.941, RMSE=0.019) exhibited a strong correlation with actual canopy height. Linear regression analysis was conducted between gap fraction of different plots and manually detected average Leaf Area Index (LAI) of rice canopy. Prediction models for canopy LAI based on ground return counts (R2=0.24, RMSE=0.1) and ground return intensity (R2=0.28, RMSE=0.09) showed strong correlations but had lower correlation with rice canopy LAI. Regression analysis was performed between LiDAR-detected canopy height and manually measured rice canopy LAI. The results indicated that the prediction model based on canopy height (R2=0.77, RMSE=0.03) was more accurate.

In Ghana, rice remains a critical crop, representing 15% of the country's GDP. However, production has been hindered by limited water access, degraded soil, pests and diseases, and ineffective pesticide use. These issues have impeded industry growth while adversely affecting the environment and impairing socioeconomic development. To combat these challenges, it is necessary to implement sustainable production strategies that emphasize environmental protection, resource management, and socioeconomic progress. This study evaluates sustainable rice production in Ghana, taking into account its consequences on the environment, socioeconomic growth, and food security. It pinpoints gaps and offers advice for stakeholders, policymakers, and scholars to transition to sustainability. The study illuminates the increasing significance of rice in Ghana and its role in food security, illustrating increased output due to widened land rather than higher yields. It underscores the necessity of fulfilling surging demand while implementing environmentally friendly practices. The paper scrutinizes the difficulties encountered by the rice sector, such as restricted water supplies and soil degradation, along with the adverse impacts of pests, diseases and inefficient pesticide utilization. Sustainable methods are imperative for Ghana's agribusiness, environmental protection, and socioeconomic progress. By embracing green techniques, prioritizing resource management, and investing in research, Ghana can surmount production issues. This review provides invaluable insight and suggestions for policymakers, academicians, and stakeholders alike to ensure sustainable rice production for current and future generations.

Most of the municipalities in the Gulf region are facing performance related issues in their municipal solid waste management (MSWM) systems. They lack to possess a deliberate inter-municipality benchmarking processes. Instead of identifying the performance gaps for their key components (e.g., personnel productivity, operational reliability, etc.) and adopt proactive measures, the municipalities primarily rely on an efficient emergency response. A novel hierarchical modeling framework, based on deductive reasoning, is developed for performance assessment of MSWM systems. Fuzzy rule based modeling using Simulink-MATLAB was used for performance inferencing at different levels, i.e., component, sub-components, etc. The model is capable of handling the inherent uncertainties due to limited data and imprecise knowledge base. The model’s outcomes can exclusively assist the managers working at different levels of organizational hierarchy for effective decision-making. Performance of the key component, assists the senior management to assess the overall compliance level of performance objectives. Subsequently, operation management can hone in the sub-components to acquire useful information for intra-municipality performance management. While, individual indicators are useful for inter-municipality benchmarking. The model has been implemented on two municipalities operating in Qassim Region, Saudi Arabia. The results demonstrate the model’s pragmatism for continuous performance improvement of MSWM systems in the country and elsewhere.

Artificial intelligence (AI) applications in different fields are developing rapidly, among which AI painting technology, as an emerging technology, has received wide attention from users for its creativity and efficiency. This study aimed to investigate the factors that influence user acceptance of the use of AIBPS by proposing an extended model that combines the Extended Technology Acceptance Model (ETAM) with the AI-based Painting System (AIBPS).A questionnaire was administered to 528 Chinese participants, using validated factor analysis data and Structural Equation Modeling (SEM) was used to test the hypotheses. The findings showed that hedonic motivation (HM) and perceived trust (PE) had a positive effect (+) on users' perceived usefulness (PU) and perceived ease of use (PEOU), while previous experience (PE) and technical features (TF) had no effect (-) on users' perceived usefulness (PU). This study provides an important contribution to the literature on AIBPS and the evaluation of systems of the same type, which helps to promote the sustainable development of AI in different domains and provides a possible space for further extension of TAM, thus helping to improve the user experience of AIBPS. The results of the study provide insights for system developers and enterprises to better motivate users to use AIBPS.

In areas with strongly seasonal climates, local people often use complex strategies to manage agricultural production shortages, including diverse activities such as hunting, selling and consuming non-agricultural products, and wage labor. We surveyed all the households in a village in northern Laos to evaluate how such livelihood activities varied during years with differing agricultural production conditions. We compared two years with normal rice production conditions (2010, 2012) and one year with a severe rice shortage (2011) due to a rodent outbreak. Earning wages inside and outside the village was the most important activity for mitigating rice shortages, followed by selling livestock and using/selling non-timber forest products. Villagers also borrowed rice from a village rice bank. Most cash income was earned from selling rice. We concluded that a balance of traditional risk management activities under the swidden system (e.g., raising livestock) with the more recent rice bank system and wages from the market economy will be critical for the sustainable development of mountain villages in northern Laos. Permanent crops and monocultures tend to make local livelihoods more dependent on a single crop, but maintaining the traditional swidden system will help local people to manage agricultural production shortages.

The diagnosis and management of cow's milk allergy (CMA) is a topic of debate and controversy. We aimed to compare the opinions of expert groups from the Middle East (n=14) and the European Society of Pediatric Gastroenterology, Hepatology and Nutrition (ESPGHAN) (n=13). These Expert groups voted on statements developed by the ESPGHAN group and published in a recent position paper. The voting outcome was compared. Overall, there was consensus amongst both groups of experts. Most experts agreed that symptoms of crying, irritability and colic, as single manifestations, do not suggest CMA. They agreed that amino-acid-based formula (AAF) should be reserved for severe cases (e.g. malnutrition and anaphylaxis) and that there is insufficient evidence to recommend a step-down approach. There was no consensus on the statement that a cow’s milk-based extensively hydrolysed formula (eHF) should be the first choice as a diagnostic elimination diet in mild/moderate cases. Although the statements regarding the role of hydrolysed rice formula as a diagnostic and therapeutic elimination diet were accepted, 3/27 disagreed. The votes regarding soy formula highlight the differences in opinion in the role of soy protein in CMA dietary treatment. Generally, soy-based formula is seldom available in the Middle East region. All ESPGHAN experts agreed that there was no added value of probiotics, prebiotics, and synbiotics to the efficacy of elimination diets, whereas 3/14 of the Middle East group thought there was sufficient evidence. Therefore, there is not a consensus on the optimal diagnostic and therapeutic elimination diet for CMA, but the first-choice elimination diet and the stepwise management approach reveal some differences.

The interest on the use of renewable energy resources is increasing, especially towards wind and hydro powers, which should be efficiently converted into electric energy via suitable technology tools. To this aim, self--tuning control techniques represent viable strategies that can be employed for this purpose, due to the features of these nonlinear dynamic processes working over a wide range of operating conditions, driven by stochastic inputs, excitations and disturbances. Some of the considered methods were already verified on wind turbine systems, and important advantages may thus derive from the appropriate implementation of the same control schemes for hydroelectric plants. This represents the key point of the work, which provides some guidelines on the design and the application of these control strategies to these energy conversion systems. In fact, it seems that investigations related with both wind and hydraulic energies present a reduced number of common aspects, thus leading to little exchange and share of possible common points. This consideration is particularly valid with reference to the more established wind area when compared to hydroelectric systems. In this way, this work recalls the models of wind turbine and hydroelectric system, and investigates the application of different control solutions. The scope is to analyse common points in the control objectives and the achievable results from the application of different solutions. Another important point of this investigation regards the analysis of the exploited benchmark models, their control objectives, and the development of the control solutions. The working conditions of these energy conversion systems will be also taken into account in order to highlight the reliability and robustness characteristics of the developed control strategies, especially interesting for remote and relatively inaccessible location of many installations.

This work presents some characteristics of MoNet, a computerized platform for the modeling and visualization of complex systems. Emphasis is on the ideas that allowed the successful progressive development of this modeling platform, which goes along with the implementation of applications to the modeling of several studied systems. The platform has the capacity to represent different aspects of systems modeled at different observation scales. This tool offers advantages in the sense of favoring the perception of the phenomenon of the emergence of information, associated with changes of scale. Some criteria used for the construction of this modeling platform are included. The power of current computers has made practical representing graphic resources such as shapes, line thickness, overlaying-text tags, colors and transparencies, in the graphical modeling of systems made up of many elements. By visualizing diagrams conveniently designed to highlight contrasts, these modeling platforms allow the recognition of patterns that drive our understanding of systems and their structure. Graphs that reflect the benefits of the tool regarding the visualization of systems at different scales of observation are presented to illustrate the application of the platform.

Rice production is a significant contributor to methane emissions, accounting for ap-proximately 11% of global anthropogenic emissions. However, methane emissions in rice fields could effectively be reduced by implementing proper management practices and careful cultivar selection. The impact of nitrogen fertilizers on methane emissions is mul-tifaceted, as these fertilizers enhance crop growth and influence the activity of me-thane-producing (methanogens) and methane-consuming microbes (methanotrophs), leading to complex outcomes in methane emissions. In this study, we used qPCR to quan-tify methanogens and methanotrophs using mcrA (methanogenesis-related gene) and pmoA (methane oxidation-related gene) primer sets under different nitrogen levels (0, 50, and 100%) and rice varieties. The results revealed that higher nitrogen input led to higher methanogen inhabitation in the rhizosphere. Additionally, the abundances of methano-gens and methanotrophs varied among the different rice varieties. Furthermore, it was observed that there may be an additive effect between the rice variety and nitrogen level used. These findings suggest that future breeding efforts should involve screening for me-thane-related microbes in rice cultivars adapted to low-nitrogen conditions. By identifying and selecting rice varieties that promote lower methanogen levels and higher metha-notroph inhabitation, significant steps can be taken to mitigate greenhouse gas emissions from rice cultivation.

Abstract: Rice production is a significant contributor to methane emissions, accounting for approximately 11% of global anthropogenic emissions. However, there is potential for effectively reducing methane emissions from rice fields through the implementation of proper management practices and careful cultivar selection. The impact of nitrogen (N) fertilizers on methane (CH4) emissions is multifaceted, as these fertilizers not only en-hance crop growth but also influence the activity of methane-producing microbes (Meth-anogens) and methane-consuming microbes (Methanotrophs), leading to complex out-comes in CH4 emissions. In this study, we utilized qPCR to quantify methanogens and methanotrophs using mcrA (methanogenesis-related gene) and pmoA (methane oxida-tion-related gene) primer sets under different nitrogen levels (0, 50, 100%) and rice varie-ties. The results revealed that higher nitrogen inputs led to higher methanogen inhabita-tion in the rhizosphere. Additionally, the abundances of methanogens and metha-notrophs varied among different rice varieties. Furthermore, through the analysis of two-way ANOVA, it was observed that there may be an additive effect between rice variety and nitrogen level. Furthermore, enhancing agronomic traits related to yield can reduce methanogen inhabitation. These findings suggest that future breeding efforts should in-volve the screening of methane-related microbes in rice cultivars adapted to low nitrogen conditions. By identifying and selecting rice varieties that promote lower methanogen lev-els and higher methanotroph inhabitation, we can take significant steps towards mitigating greenhouse gas emissions from rice cultivation.

The recovery of precious metals is a project with both economic and environmental significance. In this paper, it presents how to use bacterial mineralization to selectively recover gold from multi-ionic aqueous systems. The Bacillus licheniformis FZUL-63, separated from a landscape lake in FuZhou University, was shown to selectively mineralize and precipitate gold from coexisting ions in aqueous solution. The removal of Au(III) was almost happened in first hour, and FTIR data show that the amino, carboxyl and phosphate groups on the surface of the bacteria are related to the adsorption of gold ions. XPS results implied that Au(III) ions are reduced to monovalent, and then the Au(I) was adsorbed on the bacterial surface at the beginning stage(first hour). XRD results showed the gold biomineralization began about 10 hours after the interaction between Au(III) ions and bacteria. The Au(III) mineralization has been rarely influenced by other co-existing metal ions. TEM analysis shows the gold nanoparticles are polyhedral structure with a particle size of ~20 nm. The Bacillus licheniformis FZUL-63 could selectively mineralize and recover 478 mg/g(dry biomass) gold from aqua regia-based metal wastewater through four cycles. It could be of great potential in the practical application.

Linear programming formulations of forest ecosystem management (FEM) problems proposed in the 60s have been adapted and improved upon over the years. Generating management alternatives for forest management planning is a key step in building these models. Global forests are diverse, and a variety of models have been developed to simulate management alternatives. Climate change has made forest management calculations even more complex, requiring flexibility, diverse parameters, models, and methods. Despite this complexity, consistent concepts can be applied in developing management alternatives for forest management planning. This work describes iGen, a flexible forest prescription generator that applies the AI technique Rule-Based System (AI-RBS). iGen projects the state and associated inputs and outputs for a set of management units using rules from its knowledge base. An Inference Engine uses the rules to simulate a set of prescriptions in a tree-like graph structure. Without needing IT specialists, forest managers can describe the potential development of their forest through variables, rules, formulas, functions, and procedures. A key feature of iGen is that it is not limited to, adapted to, or focused on any specific region, landscape, forest condition, projection method, or yield function. Instead, it aims to maximize generality, enabling it to address a broad range of FEM problems. This article introduces iGen, explaining its concepts, structure, and algorithms through two FEM problems: natural regeneration with shelterwood harvests and plantation/coppice. For data and iGen source programs, visit github.com/…/iGen.

Since sensor-based perception systems are used in autonomous vehicle applications, validating such systems is imperative to guarantee the robustness of the systems before they are being put to use. In this study, a comprehensive corruption-related simulation-based robustness verification and enhancement process for sensor-based perception systems is proposed. Firstly, we present a methodology and scenario-based corruption generation tools for creating diverse simulated test scenarios that can analogously represent real-world traffic environments, especially considering corruption types related to safety concern. Then, an effective corruption similarity filtering algorithm is proposed to remove corruption types with high similarity and identify the representative corruption types to represent all considered corruption types. As a result, we can generate efficient corruption-related robustness test scenarios with less testing time and good scenario coverage. Subsequently, we perform the vulnerability analysis of object detection models to identify model weaknesses and construct an effective training dataset for model vulnerability enhancement. This enhances the tolerance of object detection models to weather and noise-related corruptions, ultimately improving the robustness of the perception system. We employ case studies to demonstrate the feasibility and effectiveness of the proposed robustness verification and enhancement procedures. Additionally, we explore the impact of different "similarity overlap threshold" parameter settings on scenario coverage, effectiveness, scenario complexity (size of training and testing datasets), and time costs.

Green Infrastructure promotes the use of natural functions and processes as potential solutions to reduce negative effects derived from anthropocentric interventions such as urbanization. In cities of Latin America, for example, the need for more nature-sound infrastructure is evident due to its degree of urbanization and degradation of ecosystems, as well as the alteration of the local water cycle. In this study, an experimental approach for implementation of a prototype is presented. The experiment took place in a highly urbanized watershed located in the Metropolitan Area of Costa Rica. Initially, understanding the characteristics of the study area at different scales was achieved by applying the Urban Water System Transition Framework to identify the existing level of development of the urban water infrastructure, and potential future stages. Subsequently, preferences related to spatial locations and technologies were identified from different local decision-makers. Those insights were adopted to identify a potential area for implementation of the prototype. The experiment consisted on an adaptation of the local sewer to act as a temporal reservoir to reduce the effects derived from rapid generation of stormwater runoff. Unexpected events, not considered initially in the design, are reported in this study as a means to identify necessary adaptations of the methodology. Our study shows from an experimental learning-experience that the relation between different actors advocating for such technologies influences the implementation and operation of non-conventional technologies. Furthermore, the perception of security associated to green spaces was found as a key driver to increase the willingness of residents to modify their urban environments. In consequence, those aspects should be carefully considered as factors of designs of engineering elements when they are related to complex socio-ecological urban systems.

the intermittency and variability of these permeated Distributed Generators (DGs) could critically cause many security and economy risks to distribution systems. This paper applied a certain mathematical distribution to imitate the output variability and uncertainty of DGs. And then, four risk indices EENS, PLC, EFLC and SI were established to reflect the system risk level of distribution system. For the certain mathematical distribution of the DGs' output power, a developed PEM (point estimate method)-based method was proposed to calculate these four system risk indices. In this developed PEM-based method, enumeration method was used to list the states of distribution systems, an improved PEM was presented to deal with the uncertainties of DGs and the value of load curtailment in distribution systems was calculated by an optimal power flow algorithm. Finally, the effectiveness and advantages of this proposed PEM-based method for distribution system assessment were verified by the tests of a modified IEEE 30-bus system. Simulation results have shown that this proposed PEM-based method has a high computational accuracy and highly reduced computational costs compared with other risk assessment methods and is very effective for risk assessments.

Plants significantly shape root-associated microbiota, making rhizosphere microbes useful environmental indicator organisms for safety assessment. Here, we report the pyrosequencing of the bacterial 16S ribosomal RNA in rhizosphere soil samples collected from transgenic cry1Ab/cry1Ac Bt rice Huahui No. 1 (GM crop) and its parental counterpart, Minghui63. We identified a total of 2,579 quantifiable bacterial operational taxonomic units (OTUs). Many treatment-enriched microbial OTUs were identified, including 14 NonGM-enriched OTUs and 10 GM-enriched OTUs. The rhizosphere microbiota communities were influenced more strongly by growth in the field than by rice varieties. Furthermore, Huahui No. 1 transgenic Bt rice had a greater impact on the rhizosphere bacterial communities than Minghui63. Early developmental stages of the transgenic Bt rice had a significant impact on many Bacillaceae communities. While soil chemical properties were not significantly altered by the presence of transgenic Bt rice, we found peak expression level of Bt proteins during the seedling stage, which may be an intriguing factor for bacterial diversity variations. Based on these findings, we conclude that transgenic Bt rice has a significant impact on root-associated bacteria. This information may be leveraged in future environmental safety assessments of transgenic Bt rice varieties.

Whereas a vast literature exists on satellite-based mapping of rice paddy fields in Asia, where most of the global production takes place, little has been produced so far that focuses on the European context. Detection and mapping methods that work well in the Asian context will not offer the same performances in Europe, where different seasonal cycles, environmental contexts, and rice varieties make distinctive features dissimilar to the Asian case. In this context, water management is a key clue; watering practices are distinctive for rice with respect to other crops, and within rice there exist diverse cultivation practices including organic and non-organic approaches. In this paper, we focus on satellite-observed water management to identify rice paddy fields cultivated with a traditional agricultural approach. Building on established research results, and guided by the output of experiments on real-world cases, a new method for analysing time series of Sentinel-1 data has been developed, which can identify traditional rice fields with a high degree of reliability. This work is a part of a broader initiative to build space-based tools for collecting additional pieces of evidence to support food chain traceability; the whole system will consider various parameters, whose analysis procedures are still at their early stages of development.

The paper delineates the developed vision system of the UR5 cobot and the operating algorithm of the robotic quality control station. The hardware-software architecture of the developed robotic station was shown, consisting of a UR5 cobot equipped with a web camera and a stationary industrial camera with a lighting system. Image processing and analysis algorithms were described, the method of control and communication between the station components was discussed, and two operating scenarios were presented as a single robotic station and a robotic line. Based on the results obtained, the level of measurement noise, accuracy, and repeatability of the developed vision system were estimated.

The interest on the use of renewable energy resources is increasing, especially towards wind and hydro powers, which should be efficiently converted into electric energy via suitable technology tools. To this aim, data--driven control techniques represent viable strategies that can be employed for this purpose, due to the features of these nonlinear dynamic processes working over a wide range of operating conditions, driven by stochastic inputs, excitations and disturbances. Some of the considered methods, such as fuzzy and adaptive self--tuning controllers, were already verified on wind turbine systems, and similar advantages may thus derive from their appropriate implementation and application to hydroelectric plants. These issues represent the key features of the work, which provides some guidelines on the design and the application of these control strategies to these energy conversion systems. The working conditions of these systems will be also taken into account in order to highlight the reliability and robustness characteristics of the developed control strategies, especially interesting for remote and relatively inaccessible location of many installations.

Increasingly, there is a focus on utilising renewable energy resources in a bid to fulfil increasing energy requirements and mitigate the climate change impacts of fossil fuels. While most renewable resources are free, the technology used to usefully convert such resources is not and there is an increasing focus on improving the conversion economy and efficiency. To this end, advanced control technologies can have a significant impact and is already a relatively mature technology for wind turbines. Though hydroelectric plants can use simple regulation systems, significant benefits have been shown to accrue from the appropriate use of the same control methods designed for wind turbine plants. This represents the key point of the paper. In fact, to date, the application communities connected with wind and hydraulic energies have had little communication, resulting in little cross fertilisation of control ideas and experience, particularly from the more mature wind area to hydrodynamic systems. Therefore, this paper examines the models and the application of control technology across both domains, both from a comparative and contrasting point of view, with the aim of identifying commonalities in models and control objectives, as well as potential solutions. Key comparative reference points include the articulation of the exployed models, specification of control objectives, development of high--fidelity simulators, and development of solution concepts. Not least, in terms of realistic system requirements are the set of physical and constraints under which such renewable energy systems must operate, and the need to provide reliable and robust control solutions, which respect the often remote and relatively inaccessible location of many onshore and offshore deployments.

The modifications in planting structure and continuous land use adjustments have significant implications for the structure, diversity, and functioning of arthropod communities in farmland landscapes, particularly regarding the biological control of pest insects by natural enemy species. Therefore, there is an urgent need to comprehensively and accurately assess insect community diversity in croplands. In this study conducted between 2022-2023, we utilized Malaise traps and sweep netting to collect insects from three different double-cropping paddy fields. We extracted DNA from preservative ethanol of Malaise traps and tissue samples of selected parasitoid wasps, followed by amplification using DNA barcoding primers to prepare high-throughput sequencing libraries. As a result, we annotated a total of 4956 operational taxonomic units (OTUs) belonging to 174 genera and 32 families of parasitoid wasps. Our findings demonstrate that the ethanol filter method efficiently captures a wide range of information diversity. However, it demonstrates a lower resolution and may result in a reduction of species abundance. Furthermore, we have identified additional insect species in the parasitoid samples. This demonstrates that high throughput sequencing from adult parasitoid wasps can effectively detect host specie, enabling a comprehensive understanding of host species and providing novel insights into food web construction.

Tiller angle (TA) is one of the most important agronomic traits which directly affected plant architecture, photosynthetic efficiency, and planting density of rice. Although many quantitative trait loci (QTL) and associated genes for tiller angle have been identified, the detection of QTL for TA still required emphasis. In this study, 238 micro-core germplasm populations were used for genome-wide association analysis (GWAS) of the tiller angle. The frequency distribution of TA was shown to be continuous in 2018 and 2019, five QTL designated as qTA1, qTA2, qTA6, qTA9, qTA12, and two QTL designated as qTA1, qTA1-1 were detected in 2018 and 2019, respectively. These QTL explained phenotypic variation ranged from 5.94% to 12.38%. Among them, qTA2 and qTA6 are new QTL for TA, and only qTA1 was detected repeatedly in two years. 253 germplasm from the 3K Rice Genome Project were used for candidate gene and haplotypes analysis, the candidate gene and haplotypes analyzed showed LOC_Os01g67770, LOC_Os02g35180 and LOC_Os09g38130 were the candidate gene of qTA1, qTA2, and qTA9, respectively. The results of this study provide insight into the genetic improvement of plant architecture in rice.

Mitochondrial alternative oxidase 1a (AOX1a) plays an extremely important role in critical node of seed viability. However, the regulatory mechanism is still poorly understood. The study aims to identify regulatory mechanisms by comparing between OsAOX1a-RNAi and wild type (WT) rice seed during artificial aging treatment. Gain weight and P50 significantly decreased in OsAOX1a-RNAi rice seed, indicating that there might be impaired in seed development and storability. Compared to WT seeds in the 100%, 90%, 80%, and 70% germination, respectively, NADH and succinate-dependent O2 consumption, the activity mitochondrial malate dehydro-genase and ATP contents were decreased in OsAOX1a-RNAi seeds in the 100%, 90%, 80%, and 70% germination, respectively, indicating that mitochondrial status in the OsAOX1a-RNAi seeds after imbibition was weaken than the WT. In addition to, the reduced abundance of complex I N and P module subunits might showed that the capacity of mitochondrial electron transfer chain was significantly inhibited in the OsAOX1a-RNAi seed at critical node of seed viability. Above results might indicated that the ATP production was impaired in OsAOX1a-RNAi seeds during ageing. Therefore, we conclude that the activities of mitochondrial metabolism and alternative pathways were severely inhibited in OsAOX1a-RNAi seeds at critical node of viability, which was leading to accelerate the collapse of seed viability. The precise regulatory mechanism of the alternative pathway at the critical node of viability still needs to be further analyzed.

A field experiment was conducted during Kharif 2018, laid out in Randomized Block Design with three replications having seven treatments viz. N omission (T1), N applied as basal and AT (T2), N as basal, AT and PI (T3), N as basal and top dressing at NDVI threshold of 0.75 (T4), at NDVI threshold of 0.8 (T5), at SPAD threshold of 35.0 (T6) and SPAD threshold of 37.5 (T7) with Rice variety Sahabhagidhan.The study revealed that application of 30 kg N/ha as basal dose and top dressing of 20 kg N/ha twice at 35 and 63 DAS guided by NDVI threshold value of 0.8 (T5) was found to be superior over other treatments with respect to productivity. T5 recorded highest grain yield of 4438 kg/ha which was 17.0% higher than that top dressed at NDVI threshold of 0.75 (T4) and 7.1% higher than that top dressed at SPAD threshold value of 37.5 (T7). In case of SPAD meter, nitrogen top dressed at threshold value of 37.5 (T7) produced grain yield of 4143 kg/ha which was 15.0% higher than T6. T5 produced maximum dry matter of 8678 kg/ha with highest grain yield (4438 kg/ha), straw yield (5092 kg/ha) and harvest index 46.0%.

Rice is an essential crop for national food security in Egypt. Increasing the population calls for regular increases in rice production. At the same time, cultivated rice crop areas should be decreased because of the gradual scarcity of irrigation water. This means more rice production should be gained from less rice area. This situation calls for the annual accurate system for rice monitoring and yield estimation. Therefore, it is necessary to apply a remotely sensed based system for rice cultivation assessment using satellite imagery parallel with field measurements of some biophysical parameters. Multi-temporal normalized difference vegetation index (NDVI) extracted from twelve sentinel-2 imagery cover the whole summer season with variance and maximum value assessed by ground control points (GCPs), were used to isolate uncultivated areas, then to isolate rice areas and other vegetation covers. object-based classification methods with kappa co-efficient 0.9261 and overall accuracy 94.92% was generated to discriminate rice crop area and other summer crops on the study area. Leaf area index (LAI) for the experiment the l site was calculated using the surface energy balance algorithm for Land (SEBAL) model and then tested versus measured (LAI). NDVI and LAI were used to generate an empirical ran rice yield prediction model. Then, this model was used to produce rice to yield a map. The study was carried out in an experimental site in Kafr Elsheikh governorate with a total area of 5040 Hectare. Produced cultivated land use map showed 95% overall accuracy. High similarity was observed between measured and calculated (LAI) with high accuracy of R2 = 0.94. of Rice, yield map showed expected to yield more to than a month before harvest. The generated yield map was tested using a correlation coefficient between actual yield and estimated yield with high accuracy R2 = 0.9. This method is applicable to estimate the acreage and productivity of rice in the northern Nile delta in adequate time before harvest.

Fusarium graminearum is a cereal pathogen responsible for economic losses worldwide every year. An understanding of its growth is key to control its infection, but current growth models are limited because their size-based approach provides little information about the mold's metabolism. Recently, a RGB (red, green and blue) imaging analysis demonstrated the predictability of F. graminearum color change as it grows in yeast extract agar (YEA). This study aimed to verify the same phenomenon in oats (a_w = 0.94, 0.97 and 0.99) and rice (a_w = 0.97, 0.98 and 0.99). Photos were taken using a professional camera and a smartphone (iPhone 6) after incubation and during the subsequent 16 days, and average RGB was quantified using ImageJ software. The photos showed very similar color variations, regardless of the type of grain or a_w. The mold first adopted a k-selection strategy by growing as a mycelium and then a r-selection strategy, increasing spore production. All RGB channels showed positive Pearson correlations between them (p < 0.001) and it was possible to design a model showing two lag phases, the first prior to a mycelial phase and the second prior to a sporular phase at the end of the experiment.

This research paper aims to examine the relationship between CO2, temperature, area, fertilizers and rice production in Pakistan. This study used Augmented Dickey Fuller (ADF) and Phillips Perron (PP) unit root tests to check the order of integration of each variable. The cointegration analysis with ARDL bounds testing approach is used to examine the impact of climate change on rice production in Pakistan over time series data from the period 1968 to 2014. The parameter stability test of the model is also checked at the end. The results of estimation show that the important variables of the study are cointegrated demonstrating the presence of long-run association among them. Furthermore, climate change factors, e.g. CO2 and temperature have a long-run and short-run positive effect on the production of rice in Pakistan. This present work is original and it is first time empirically tested the impact of climate change on rice production in Pakistan. The annual time series data of 47 years enhances the validity of the empirical findings. The most fruitful finding of this research is that rice production in Pakistan is positively influenced by emission of carbon dioxide (CO2) at 5 percent significance level in both long-run and short-run.

Background: Globally, hot cooked refined rice is consumed in large quantities and is a major contributor to dietary glycaemic load. This study aimed to compare the glycaemic potency of hot and cold stored parboiled rice to widely available medium grain white rice. Method: Twenty-eight healthy volunteers participated in a three treatment experiment where postprandial blood glucose was measured over 120 minutes after consumption of 140g of rice. Three rice samples were freshly cooked medium-grain white rice, freshly cooked parboiled rice, and parboiled rice stored overnight at 4 ºC. All rice was served warm at 65 ºC. Chewing time was recorded. Results: The 24-hours cold-stored and reheated parboiled rice resulted in a 42% and 12% lower blood glucose concentration trajectory than freshly cooked medium-grain white rice and freshly cooked parboiled rice. Chewing time for 10g cold stored parboiled rice was 6 seconds (25%) longer and was considered more palatable, visually appealing and better tasting than freshly cooked medium grain (all P<0.05). Conclusions:. For regular consumers of rice reheating cooked rice after cold storage would lower the dietary glycaemic load and long term may reduce risk for type 2 and gestational diabetes. More trials are needed to identify the significance.

The rapid growth in the number of interconnected devices on the Internet (referred to as the Internet of Things – IoT), along with the huge volume of data that are exchanged and processed, has created a new landscape in network design and operation. Due to the limited battery size and computational capabilities of IoT nodes, data processing usually takes place on external devices. Since latency minimization is a key concept in modern era networks, edge servers that are in close proximity to IoT nodes gather and process related data, while in some cases data offloading in the cloud might have to take place. The interconnection of a vast number of heterogeneous IoT devices with the edge servers and the cloud, where IoT, edge and cloud converge to form a computing continuum, is also known as IoT-edge-cloud (IEC) continuum. Several key challenges are associated with this new computing systems architectural approach, including: i) design of connection and programming protocols aimed at properly manipulating a huge number of heterogeneous devices over diverse infrastructures; ii) design of efficient task offloading algorithms aimed at optimizing services execution; iii) support for security and privacy enhancements during data transfer to deal with the existent and even unforeseen attacks and threats landscape; iv) scalability, flexibility and reliability guarantees to face the expected mobility for IoT systems, and; v) design of optimal resource allocation mechanisms to make the most out of the available resources. These challenges become even more significant towards the new era of sixth generation (6G) networks, which will be based on the integration of various cutting edge heterogeneous technologies. Therefore, the goal of this survey paper is to present all recent developments in the field of IEC continuum systems, with respect to the aforementioned deployment challenges. In the same context, potential limitations and future challenges are highlighted as well. Finally, indicative use cases are also presented, from an IEC continuum perspective.

Desalination accounts for 1% of the total global water consumption and is an energy-intensive process, with the majority of operational expenses attributed to energy consumption. Moreover, at present, a significant portion of the power comes from traditional fossil fuel-fired power plants and the greenhouse gas emissions associated with power production along with concentrated brine discharge from the process, pose a severe threat to the environment. Due to the dramatic impact of climate change, there is a major opportunity to develop sustainable desalination processes to combat the issues of brine discharge, greenhouse gas emissions along with a reduction in energy consumption per unit of freshwater produced. Nanotechnology can play a vital role to achieve specific energy consumption reduction as nanofluids application increases the overall heat transfer coefficient enabling the production of more water for the same size desalination plant. Furthermore, concentrated brine discharge harms the marine ecosystems, and hence, this problem must also be solved to support the objective of sustainable desalination. Several studies have been carried out in the past several years in the field of nanotechnology applications for desalination, brine treatment and the role of renewable energy in desalination. This paper aims to review the major advances in this field of nanotechnology for desalination. Furthermore, a hypothesis for developing an integrated solar thermal and nanofluid sustainable desalination system, based on the cyclic economy model is proposed.

Interviews from strength and conditioning coaches across all levels of athletic competition identified their two biggest concerns with the current state of wearable technology: (a) the lack of solutions that accurately capture data "from the ground up" and (b) the lack of trust due to inconsistent measurements. The purpose of this research is to investigate the use of liquid metal sensors, specifically Liquid Wire sensors, as a potential solution for accurately capturing ankle complex movements such as plantar flexion, dorsiflexion, inversion, and eversion. Sensor stretch linearity was validated using a Micro-Ohm Meter and a Wheatstone bridge circuit. Sensors made from different substrates were also tested and discovered to be linear at multiple temperatures. An ankle complex model and computing unit for measuring resistance values were developed to determine sensor output based on simulated plantar flexion movement. The sensors were found to have a significant relationship between the positional change and the resistance values for plantar flexion movement. The results of the study ultimately confirm the researchers' hypothesis that liquid metal sensors, and Liquid Wire sensors specifically, can serve as a mitigating substitute for inertial measurement unit (IMU) based solutions that attempt to capture specific joint angles and movements.

Rice is an important cereal crop worldwide, the growth of which is affected by rice blast disease, caused by the fungal pathogen Magnaporthe oryzae. As climate change increases the diversity of pathogens, the disease-resistance genes (R genes) in plants must be identified. The major blast-resistance genes have been identified in indica rice varieties; therefore, japonica rice varieties with R genes now need to be identified. Because leucine-rich repeat (LRR) domain proteins possess R-gene properties, we used bioinformatics analysis to identify the rice candidate LRR domain receptor-like proteins (OsLRR-RLPs). OsLRR-RLP2, which contains six LRR domains, showed differences in the DNA sequence, containing 43 single-nucleotide polymorphisms (SNPs) in indica and japonica subpopulations. The results of M. oryzae inoculation analysis indicated that indica varieties with partial deletion of OsLRR-RLP2 showed susceptibility, whereas japonica varieties with intact OsLRR-RLP2 showed resistance. oslrr-rlp2 mutant generated using clustered regularly interspaced palindromic repeats (CRISPR)/CRISPR-associated protein 9 (Cas9) showed increased pathogen susceptibility, whereas plants overexpressing this gene showed pathogen resistance. These results indicate that OsLRR-RLP2 confers resistance to rice, and OsLRR-RLP2 may be useful for breeding resistant cultivars.

OsNRAMP5—a member of the same family as the iron, manganese (Mn), and cadmium (Cd) transporter OsNRAMP1—is responsible for the transport of Mn and Cd from soil in rice. Knockout of OsNRAMP5 markedly reduces both Cd and Mn absorption; therefore, in low -Mn environments, such plants would exhibit Mn deficiency and suppressed growth. Amino acid mutations in IRT1 alter its metal selectivity. We generated random mutations in OsNRAMP5 via error-prone PCR, and used yeast to screen for the retention of Mn absorption and inhibition of Cd absorption. The results showed ththat alanine 512th is the most important amino acid residue for Cd absorption, and that its substitution resulted in the absorption of Mn but not Cd.

The objectives of this research were to determine 1) the energy contents of broken rice in dairy cows by animal calorimetry and 2) the effects of various levels of broken rice in diets on dairy cow performance. Four multiparous Holstein-Friesian crossbred cows at 70 ± 31 (mean ± SD) days in milk were assigned according to a 4 × 4 Latin square design with four periods. The four treatments included a diet substitution with broken rice on a 0, 12, 24, and 36% dry matter basis in the basal ration. Indirect calorimetry with a ventilated head box respiration system was used to determine energy metabolism. The substitution of broken rice in the diet did not affect dry matter intake, milk yield, milk composition, feed efficiency or energy balance (p > 0.05). Increasing broken rice substitution in the diet resulted in a linear increase in enteric methane energy losses and digestibility of dry matter, organic matter, and fiber (p < 0.05), whereas the digestibility of crude protein and ether extract decreased (p < 0.05). The metabolizable energy requirement for maintenance was 504 kJ/kg metabolic body weight, and the efficiency of metabolizable energy used for lactation was 0.76. The estimated net energy value of broken rice for lactation was 8.68 MJ/kg. Our results indicated that increasing the proportion of broken rice in the diet up to 36% had no adverse effect on feed intake and production performance in dairy cows.

An experiment was conducted in 2016 & 2017 for development of novel rice hybrids for aerobic ecology with lesser yield penalties in comparison to irrigated ecosystem, further with added advantage of reduced methane emissions and water budget as witnessed in irrigated system. Based on the restorer / maintainer reaction and spikelet fertility (%), 10 restorer lines were selected to cross with 3 CMS lines in the line by tester fashion in Yasangi (summer) season 2016-17. Resulting 30 experimental hybrids besides 13 parental lines (10 Restorer lines and 3 B - lines of akin CMS lines) and checks (GK 5022, CR Dhan 201) assessed during Vankalam (rainy) season 2017 at three different places/locations viz., Rajendranagar, Warangal and Kampasagar. The outcome of experiment were two experimental hybrids viz., APMS-6A × HRSV – 7 and IR-79156A × ATR – 372, were categorized as stable hybrids with desirable sca effects, heterosis (ranging from 7% to 13%) over best check GK 5022 along with an in-essence performance for yield and other yield attributing characters.

Cadmium (Cd) contamination in rice grains is posing a significant threat to global food security. To restrict the transport of Cd in the soil-rice system, an efficient way is to use the ionomics strate-gy. Since calcium (Ca) and Cd have similar ionic radii, their uptake and translocation may be linked in multiple aspects in rice. However, the underlying antagonistic mechanisms are still not fully understood. Therefore, we first summarized the current knowledge on the physiological and molecular footprints of Cd translocation in plants and then explored the potential antagonistic points between Ca and Cd in rice, including exchange adsorption on roots, plant cell wall compo-sition, co-transporter gene expression, and transpiration inhibition. This review provides sugges-tions for the Ca/Cd interacting study in rice and introduces the ionomics research to better control the accumulation of Cd in plants.

The transcriptomic analysis of the dehydration rate of mature rice seeds was conducted to explore candidate genes related to the dehydration rate and provide a theoretical basis for breeding and utilization. In this study, we selected Baghlani Nangarhar, an extremely fast dehydration material, and Saturn, a slow dehydration material, based on the results of the previous studies of screening of 165 germplasm materials for dehydration rate phenotypes. Fast dehydration experiment on these two types of seeds was conducted. Four comparative groups were set up under control and dehydration conditions. The differentially expressed genes (DEGs) were quantified by transcriptome sequencing and quantitative real-time PCR (qRT-PCR). GO and KEGG analyses were carried out. The results showed that in Baghlani Nangarhar, 53 DEGs were screened, of which 33 were up-regulated and 20 were down-regulated. Similarly, in Saturn, 25 DEGs were screened, of which 19 were up-regulated and 6 down-regulated. The results of the GO analysis showed that the sites of action of the differentially expressed genes enriched in the fast dehydration modes were concentrated in the cytoplasm, internal components of the membrane and nucleosomes. They play regulatory roles in catalysis, binding, translocation, transcription, protein folding, degradation and replication. They are involved in adaptive responses to adverse external environments such as reactive oxygen species and high temperature. The KEGG analysis showed that the main metabolic pathways enriched are protein processing in the endoplasmic reticulum, amino acid biosynthesis, and oxidative phosphorylation. The key differentially expressed genes and the most important metabolic pathways in the rapidly and slowly dehydrated materials obtained in this study were protein processing in the endoplasmic reticulum and oxidative phosphorylation metabolism, which are presumed to have important regulatory roles in stress/defense, energy metabolism, protein synthesis/folding, and signal transduction during dehydration and drying of mature seeds. The results of this study could potentially provide a valuable reference for further research on the genes and metabolic pathways related to the dehydration rate of mature rice seeds and provide theoretical guidance for the selection and breeding of new rice germplasm that can be rapidly dehydrated at the mature stage.

Neonicotinoids (NEOs) have become the most widely used insecticides in the world since the mid-1990s. According to Chinese dietary habits, rice and water are usually heated before being consumed, but the information about the alteration through the heat treatment process is very limited. In this study, the parents of NEOs (p-NEOs) accounted for >99% of the total NEOs mass (∑NEOs) in both uncooked (median: 66.8 ng/g) and cooked (median: 41.4 ng/g) rice samples from Guangdong Province, China, while the metabolites of NEOs (m-NEOs) involved in this study accounted for less than 1%. We aimed to reveal the concentration changes of NEOs through heat treatment process, thus, several groups of rice and water samples from Guangdong were cooked and boiled, respectively. Significant (p < 0.05) reductions in acetamiprid, imidacloprid (IMI), thiacloprid, and thiamethoxam (THM) have been observed after the heat treatment of the rice samples. In water samples, the concentrations of THM and dinotefuran decreased significantly (p < 0.05) after the heat treatment. These results indicate the degradation of p-NEOs and m-NEOs during the heat treatment process. However, the concentrations of IMI increased significantly in tap water samples (p < 0.05) after heat treatment process, which might be caused by the potential IMI precursors in those industrial pesticide products. The concentrations of NEOs in rice and water can be shifted by the heat treatment process, so this process should be considered in relevant human exposure studies.

Rice (Oryza sativa L.) is a primary energy food for Asian population. One of the most constraints in rice production is soil salinity because of the rice is very susceptible to salt. Meanwhile, many agricultural land in Asia are in the saline area. It is important to identify and develop salt-tolerant rice varieties that can adapt in Asian climate. By combining morphological, physiological, and biochemical assessments for screening the salt tolerant of 116 Asian rice cultivars was able to classify into tolerant, moderate, and sensitive rice cultivars under salinity stress condition, and also for understanding the salt tolerance mechanisms. The rice cultivars which belong to salt-tolerant including Pokkali from India, TCCP 266 from Philippines, IR 45427 also from Philippines, and Namyang 7 from Korea. Whereas, salt-sensitive rice varieties like IR29 from Philippines, IR58 also from Philippines, Daegudo from Korea, and Guweoldo also from Korea. The salt-tolerant varieties showed signs of tolerance, including lower percent reduction of percentage germination, root length, root fresh weight, shoot length, plant biomass, and chlorophyll content. In order to maintain the cellular osmotic balance under saline condition, the salt-tolerant ones exhibited less membrane damage, lower Na/K ratio, high proline and sugar accumulation, lower malondialdehyde (MDA) and hydrogen peroxide (H2O2). Pokkali from India, TCCP 266 from Philippines, IR 45427 also from Philippines, and Namyang 7 from Korea are recommended as valuable germplasm resource for Asian rice breeding program in saline agricultural area.

Rice is the grain feeds more than half of the world population. It is an important staple food provides twenty percent of the calories consumed worldwide. Food safety affects the health of consumers. Establishing an effective traceability system is one of the primary measures to protect rice quality and food safety. Blockchain-based traceability system has the characteristics of data tamper-proofing, decentralization, and co-governance. This paper proposed a rice traceability scheme based on blockchain technology that selects the critical nodes in the rice industry chain to construct a blockchain network to achieve transparent data sharing. It is meaningful for both enterprises and consumers. It can let enterprises get the real quality information of rice and related raw materials. Consumers can get the true information of rice and rice products to buy safe and healthy food. The scheme is proved feasible by simulating the traceability of the rice supply chain.

In order to address the issue of nutrient deficiency in coconut coir-based nursery substrates, three materials with nutrient supplementation effects, namely pig manure, composted rice husks, and agricultural humic acid, were added in equal volumes to the coir-based substrate. The newly formulated substrates were then tested for their seedling growth effects on cucumber and rice. Results indicate that the substrate formulation consisting of "10% pig manure + 30% peat + 50% coconut coir + 10% vermiculite" was capable of satisfying the growth requirements of both cucumber and rice seedlings, with the highest acceptance among farmers.

The development of analog rice, apart from being an effort to diversify food, also has the potential to be develop as functional food in fulfilling the nutrients needed by a community. Katuk leaf is known for its ability to accelerate breast milk production for lactating women which is inseparable from sterol as bioactive content. This study aimed to determine the best formulation of analog rice made from cassava flour, banana flour, Katuk leaf powder and soy lecithin that was sensory acceptable, in a shape resembling rice, and able to fulfill the nutritional needs of lactating women. Analog rice was produced using extruder machine before the physical and sensory properties analyses were carried out, followed by the chemical properties analysis. Formulation C (80% cassava flour, 20% banana flour, 3% Katuk leaf powder and 0.5% soy lecithin) was obtained as the best or most preferred formulation based on sensory analysis which the grain shaped oval round resembling original rice and had green-brownish color, fluffy texture, distinct aroma and taste derived from the raw material used. Therefore, this research is expected to support the development of analog rice for providing the main staple food for fulfilling the lactating women’s nutrition.

Stresses due to drought and high soil salt content are the most severe threats to global rice pro-duction, causing a significant decline in rice yield. Therefore, this study examined the effects of treatment with various plant extracts on the stresses on rice plants associated with drought and high salinity. Additionally, this study examined various physiological and biochemical parameters such as growth, photosynthetic activity, chlorophyll content, and lipid peroxidation in rice plants after treatment with selected plant extracts under drought and salt stress conditions. Out of the eleven extracts tested, four extracts, namely soybean leaf, soybean stem, Chinese chive, and onion extracts, were found to effectively reduce drought stress. A reduction of only 24-37% in shoot fresh weight was observed in rice plants under drought stress that were treated with these ex-tracts compared to the 78% reduction observed in control plants. In addition, rice plants under salt stress which were treated with soybean leaf, soybean stem, moringa (Moringa oleifera), and Undaria pinnatifida extracts were observed to have lower reductions in shoot fresh weight (3-23%) com-pared to the control plants (43%). The effectiveness varied with the concentrations of the plant ex-tracts. Water content was higher in the rice plants treated with extracts than in the control plants after 6 days of drought and salt stress, but not after 4 days of drought and salt stress. Although photosynthetic efficiency (Fv/Fm) and electron transport rate (ETR), and the content of pigments (chlorophyll and carotenoid) varied based on the types and levels of stress and the extracts that the rice plants were treated with, generally photosynthetic efficiency and pigment contents were higher in the treated rice compared to control plants than in the control plants. Reactive oxygen species (ROS) such as the superoxide radical, hydrogen peroxide (H2O2), and malondialdehyde (MDA) levels increased as the duration of the period of stress increased. ROS and MDA levels were lower in the treated rice compared to control plants. Proline and soluble sugar accumulation also increased as the duration of the stressperiod increased. However, proline and soluble sugar ac-cumulation were lower in the treated rice compared to control plants. Generally, all the parame-ters investigated in this study were similar regardless of the plant extract used for treating the rice plants. Thus, extracts found to be effective in this study can be used to alleviate the adverse effects of stress on rice crops associated with drought and high salinity soil.

Veterinary antibiotics (VAs) have been indiscriminately used in animal feed for the past five decades to increase and ensure profits with negligible environmental considerations. The VAs amoxicillin (AMX), chlortetracycline (CTC), and oxytetracycline (OTC), which can be unintentionally introduced by irrigation water during rice cultivation, were evaluated for their phytotoxic effects, absorption-translocation into plants, and soil residues using a randomized complete block design. It was found that exposure to VAs can severely affect the photosynthetic pathway of rice plants. The uptake and translocation of VAs by rice plants varied significantly. CTC and OTC translocated more easily than AMX, a member of the β-lactam class, which accumulated at the lowest concentration compared to CTC and OTC across all treatments. Rice yield was about 4.3 - 5.7% lower in the experimental plots that received fifty-fold the background levels of VAs compared to the control. The findings indicate that these widely used veterinary antibiotics can hamper crop production, leave residues in the soil, and constitute a risk to human health if introduced into the agro-ecosystem unintentionally.

Integrated cultivation strategies can significantly improve rice yield. However, it is unclear how integrated cultivation practices improve soil microbial diversity and its related mechanism in rice field. Therefore, four integrated cultivation practices i.e., no N application (N0), local farmers’ practice (FP), high-yield and high-efficiency practice (HYEY), and super-high-yield cultivation practice, impacts on soil properties and structure composition of microbial community were explored. Compared with N0, SHY treatment, significantly increased soil alkaline nitrogen and organic matter contents. HYHE and SHY treatments significantly altered soil fungal community and Alpha diversity. Based on Venn diagram analysis, the composition of bacterial communities under all treatments was similar, but with different compositions of fungal communities. Cluster analysis indicates that the Proteobacteria was the absolute dominant group of bacterial communities, and Chloroflexi, Bacteroidetes, and Acidobacteria were the dominant group. Different cultivation methods also led to changes in the main factors affecting soil bacteria and fungi composition. Available potassium and organic matter were the main environmental factors that affected bacteria, with the strong of available potassium on the soil. To sum up, SHY and HYEY were beneficial management options in terms of improved soil fertility Alpha diversity of the soil bacterial community respectively.

The effects of exogenous inorganic [i.e., nitrate (NO3-)/ammonium (NH4+)] and organic [i.e., glutamate (Glu)/argine (Arg)] N alone and in combination on the accumulation of proline (Pro) in rice plant under trivalent chromium [Cr(III)] stress were studied through the mass balance matrix model (MBMM). ‘NH4+’ application showed the largest contribution to the Pro content in rice shoots under different concentrations of Cr(III), followed by ‘NO3-’, ‘Arg’, and ‘Glu’ application respectively. While, ‘Arg’ application displayed the largest contribution to the Pro content in roots under Cr(III) stress, followed by ‘NH4+’, ‘Glu’, and ‘NO3-’ application. Among the combination cases of N sources used, the application of ‘NH4++Arg’ showed the greatest contribution to the Pro content in both roots and shoots of Cr(III)-treated rice seedlings, while the application of ‘NO3-+Glu’ showed the least contribution to the Pro content in rice seedlings under Cr(III) stress. Results from this study indicated that the level of indigenous Pro in rice seedlings is quite sensitive to Cr(III) stress under different N sources, and mathematical modeling showed a reliable result to estimate the relationship between Pro content and N source application in rice plants in response to Cr(III) exposure .

Grain shape and chalkiness are important appearance quality traits of rice, which also affect the yield and milling quality. In this study, 190 F2 families derived from the cross between Hua 5178S and Hua 611 were sequenced to construct a genetic linkage map. Combined with F2 and F2:3 generations grain shape and chalkiness phenotype, a total of 15 QTL were detected. There are 8 grain shape QTL distributed on chromosomes 2, 5, 6, 8, and 10; 7 chalkiness QTL distributed on chromosomes 2, 3, and 6. A QTL cluster affecting multiple chalkiness traits was found on chromosome 6, qWBR6.1, qWCR6 and qCR6 were selected for genetic effect verification. It was found that qWBR6.1, qWCR6 and qCR6 explained 13% and 24%, and 29% of the phenotypic variations respectively, and qWCR6 and qCR6 were co-mapped. This study laid a foundation for further cloning of rice appearance quality genes.

Soil is a crucial component for plant growth, as it provides water, nutrients, and mechanical support. Various factors, such as crop cultivation, microflora, nutrient addition, and water availability, significantly affect soil properties. Maintaining soil health is important, and one approach is the introduction of native organisms with multifaceted activities. In this study, the effects of four native microbes (Trichoderma asperellum strain TAIK 1, Bacillus cabrialesii strain BIK3, Pseudomonas putida strain PIK1, and Pseudomonas otitidis strain POPS1) and their consortia on soil health, plant growth, and the incidence of stem rot disease caused by Sclerotium oryzae in rice are evaluated. Upon bioagent treatment of soil through seed treatment or soil application, variations in chemical properties of the soil were observed, viz., pH, Electrical Conductivity (EC), Organic Carbon (OC), available Soil Nitrogen (SN), Soil Phosphorus (SP), Soil Potassium (SK), and soil enzymes (urease, acid and alkaline phosphatase, dehydrogenase), compared to untreated soils. The treated seeds with the consortia of four native bioagents resulted in a significant increase in plant height (39.16%), number of panicles (30.29%), and average grain yield (41.36%) over control plants. Under controlled conditions, the bioagents-treated plants showed a 69.37% reduction in stem rot disease. The findings of this study indicate a positive correlation between soil properties and plant growth as well as a highly negative association with stem rot disease severity. The results suggest that using native bioagents as a management strategy can control stem rot disease and enhance crop productivity while reducing reliance on chemical interventions. These findings provide valuable insights for the development of sustainable agricultural practices that promote soil health, plant growth, and disease management.

This study aimed to investigate how transplanting date affects the agronomic and grain quality traits of two early maturing rice varieties. The experiment was conducted in the rice research field of Chungnam Agricultural Research and Extension Services, South Korea and rice materials were transplanted at intervals of approximately 15 days from April 16 to July 16 in 2019 and 2020. Results showed that agronomic and grain quality traits varied according to the transplanting date, and earlier transplanting resulted in the longer period of days from transplanting to heading (DTH). The spikelet number m-2 was highly correlated with the milled rice yield (r = 0.963** for Jinbuol, r = 0.909** for Yeoreumi) and it significantly decreased as the transplanting date was delayed, which was leading to lower yield. Environmental factors, the mean temperature during the grain filling stage, had a negative correlation with head rice rate (r2 = 0.825** for Jinbuol, r2 = 0.803** for Yeoreumi), and the number of days from transplanting to heading showed negative correlation with protein content (r2 = 0.777** for Jinbuol, r2 = 0.833** for Yeoreumi). Therefore, increasing the number of days from transplanting to heading date can lead to higher milled rice yield and lower protein content, and avoiding heading dates on July 17 can improve the appearance traits. As a results, it is suggested that early transplanting is advantageous to increase the milled rice yield and grain quality of early maturing rice.

Salinity is abiotic stress, which causes adverse environmental conditions for rice cultivation. In particular, local aromatic rice cultivation is heavily influenced by soil salinity stress, which has an impact on global food security. This study aimed to screen local aromatic rice genotypes in a hydroponics experiment using Yoshida solutions to evaluate the effect of increasing NaCl concentrations on the early growth stages of rice seedlings. Genetic diversity along with phylogenetic relationship was assessed using the random amplified polymorphic DNA (RAPD) markers. Out of 20 RAPD markers, 17 markers produced reproducible polymorphic bands. Individuals of all genotypes shared 88 (89.80%) of the 98 total RAPD elements amplified. The genetic distance-focused similarity index ranged from 0.05 to 0.94. The highest genetic distance (0.94) was discovered between genotypes Nayanmoni and Kalijira Barisal, and the lowest was between Badshabhog and Kataribhog (0.05). In addition, the OPS 3(510bp) and OPA 14(1100bp) markers could be used to identify salt-tolerant genotypes. According to genetic distance, the salt stress tolerant check genotype, Pokkali was genetically related to Chinigura as well as Kalijira Barisal. This study established a simple and consistent method for evaluating variability across various aromatic rice genotypes, which will benefit in genotype selection for breeding salinity stress tolerant aromatic rice varieties in Bangladesh.

An aerobic methanotroph, strain Kb3^T, was isolated from a rhizospheric soil sample collected from a tropical Indian rice field. The cells were motile, Gram-negative bacilli, formed pink colonies and pink turbid/pellicles in the liquid medium. Biochemical characteristics showed that strain Kb3^T utilised only methane and methanol as its sole carbon and energy sources. The isolate's 16S rRNA gene sequence expressed 99.52% similarity to the recently described valid species Methylomonas fluvii EbB (Mmf), with 92% query cover. But examining the genome similarity between Kb3 and EbB, a DDH value of 44.20% [41.6 - 46.7%] and an Ortho-ANI value of 91.48 was observed that were below the current cut-off values for species differentiation. Also, the 16S rRNA gene phylogeny and the phylogenomic analysis branched the two species separately. The major fatty acid in Methylomonas sp. Kb3 was C_14:0, followed by C_16:1 ω5c. The genome sequence revealed the size of strain Kb3 is 5.1 Mb, with the G + C content of 51.8%. Strain Kb3^T shared the closest relatedness with Methylomonas sp. LW13 reveals a 99.66% 16S rRNA gene similarity, an Ortho-ANI value of 97.9%, a DDH value of 87.3%, and a close branching in the phylogenomic tree Kb3 and LW13 together form a new species. The genomic and phylogenetic distinction between species Mmf and strain Kb3 supports Kb3^T to be described as a novel species within the genus Methylomonas, with the proposed name, Methylomonas aquatica sp. nov. (Mma) and the type strain being Kb3^T (=MCC 4012, =JCM 33634, =KCTC 72521).

Waxy rice is one of the most popular traditional crops served as a staple food in China. In this study, the effect of different factors including α-amylase activity, protein, and amylopectin structure on the pasting properties of four waxy rice varieties were investigated. Rice flours treated with AgNO3 solution, DL-dithiothreitol (DTT) or protease, suggested that both α-amylase activity and protein significantly decrease the pasting viscosity of waxy rice flours. Chain length distribution of amylopectin as measured by high performance ion exchange chromatography (HPAEC-PAD) showed that starch with higher ratio of short chain leading to a higher pasting viscosity. X-Ray diffractograms showed that the crystal type of all the four varieties of rice starches were characteristic A-type. Relative crystallinity of each rice starch was further calculated, and a higher crystallization resulted in a higher viscosity. Our study would provide a fundamental knowledge of the relationship between different factors and waxy starch pasting properties, as well as be a reference for controlling the quality of waxy rice starch-based food.

Cereals and cassava-based foods serve as major dietary sources for several households in Nigeria. However, these foods are highly prone to contamination by moulds and aflatoxins owing to poor storage and vending practices. We therefore studied the fungal diversity of maize, cassava-based flour (pupuru) and rice vended in markets from Ondo state, Nigeria, and assessed the aflatoxin levels of these using Enzyme-Linked Immunosorbent Assay. Fungi were detected in 93 (88 %) of the 106 food samples. Molecular analysis of 65 representative isolates revealed 26 species belonging to 5 genera: Aspergillus (80.9 %), Penicillium (15.4 %) and Talaromyces (1.9 %) in the Ascomycota; Syncephalastrum (1.2 %) and Lichtheimia (0.6%) in Mucoromycota. Aspergillus flavus was the predominant species in the food samples. Aflatoxins were found in 98 % of the 42 representative food samples and about one half (49.8 %) exceeded the 10 μg/kg threshold adopted in Nigeria for total aflatoxins. Integrated mitigation options, including at post-harvest stages, are suggested to ensure consumer safety.

Tanzania with 945 million hectares of land area and annual rainfall of 300 mm on 67% of its territorial land is considered as a semi-dry region in the world. Rice production in Tanzania needs to be increased to feed a growing population, whereas water for irrigation is getting scarce. One way to decrease water consumption in paddy fields is to change the irrigation regime for rice production and to replace continuous flooding with alternate wetting and drying. In order to investigate the effect of different regimes of irrigation and nitrogen fertilizer on yield and water productivity of hybrid rice, two greenhouse pot experiments comprising soils from upland and lowland production ecologies were conducted at Sokoine University of Agriculture, Tanzania during crop seasons of 2019. The experiment was arranged in split plots based on randomized completely block design with 3 replications. Water regimes were the main factor comparing continuous flooding (CF) and alternate wetting and drying (AWD) with nitrogen fertilizer levels as the sub-factor including absolute control , 0, 60, 90, 120 and 150 kg/ha. Alternate wetting and drying (AWD) improved water productivity in both upland and lowland production ecologies compared to CF. AWD increased yield under lowland production by 13.3% while in upland there was 18.5% decrease in yield. The average water use varied from 31.5 to 84 L pot-1 under upland trials, while in lowland trials it was 36 to 82.3 L. Higher yield and lower water application led to an increase in WP varying from 1.2 to 1.8 kg cm-3 under upland trials, and 0.6 to 1.5 kg cm-3 under lowland trials. The variation in water productivity among treatments was mainly due to the differences in the yield, water and nitrogen levels used in the production process. Both sets of trials recorded water saving up to 34.3% and 17.3% under lowland and upland trials, respectively. Under upland trials, the yield varied from 39.9 to 124.1 g pot-1 and in lowland trials yield ranged from 20.6 to 118.2 g pot-1 representing paddy rice. The measurements showed that less water can be used to produce more crops under alternative rice growing practices. The results are important for water-scarce areas, providing useful information to policy makers, farmers, agricultural departments, and water management boards in devising future climate-smart adaptation and mitigation strategies.

Study in black rice has gain prominence in recent times due to its high nutritive value, curative effect, and anti-oxidant properties. However, its poor agronomic traits, including low yield necessitates the incorporation of the colour-grain trait into elite varieties through plant breeding techniques. SSR markers play an important role in plant identification and breeding. Here, the generation of reference-based transcriptome, annotation of transcriptome datasets, and a large set of simple sequence repeat (SSR) markers derived from Black rice have been described. In all 28664 SSRs were predicted in 34978 (48.59%) expressed transcripts. However, 7068 (20.20%) transcripts were found to have more than one SSR. The identified SSRs were dominated by tri-nucleotide and tetra-nucleotide repeats representing about 54.11% and 33.31% respectively, of total SSRs. Validation of selected markers associated with anthocyanin trait performed across different black rice accessions established the reliability of the process used for mining SSR markers. The SSR markers identified in this study could be used to select varieties with desired traits, and to investigate the genetic mechanism underlying anthocyanin accumulation in the pericarps of black rice. Furthermore, the findings from this study may prove beneficial in future genetic diversity studies, primer development, and selective breeding programs.

The onset of leaf senescence is triggered by external cues and internal factors such as phytohormones and signaling pathways involving transcription factors (TFs). Abscisic acid (ABA) strongly induces senescence and endogenous ABA levels are finely tuned by many senescence-associated TFs. Here, we report on the regulatory function of the senescence-induced TF OsWRKY5 TF in rice (Oryza sativa). OsWRKY5 expression was rapidly upregulated in senescing leaves, especially in yellowing sectors initiated by aging or dark treatment. A T-DNA insertion activation-tagged OsWRKY5-overexpressing mutant (termed oswrky5-D) promoted leaf senescence under natural and dark-induced senescence (DIS) conditions. By contrast, a T-DNA insertion oswrky5-knockdown mutant (termed oswrky5) retained leaf greenness during DIS. Reverse-transcription quantitative PCR (RT-qPCR) showed that OsWRKY5 upregulates the expression of genes controlling chlorophyll degradation and leaf senescence. Furthermore, RT-qPCR and yeast one-hybrid analysis demonstrated that OsWRKY5 indirectly upregulates the expression of senescence-associated NAC genes including OsNAP and OsNAC2. Precocious leaf yellowing in the oswrky5-D mutant might be caused by elevated endogenous ABA concentrations resulting from upregulated expression of ABA biosynthesis genes OsNCED3, OsNCED4, and OsNCED5, indicating that OsWRKY is a positive regulator of ABA biosynthesis during leaf senescence. Furthermore, OsWRKY5 expression was significantly suppressed by ABA treatment, indicating negative feedback regulation of OsWRKY5 expression by ABA. OsWRKY5 is a positive regulator of leaf senescence that upregulates senescence-induced NAC genes leading to expression of ABA biosynthesis and chlorophyll degradation genes.

Proprotein convertase subtilisin/kexin type 9 (PCSK9) is the key regulator of low-density lipoprotein cholesterol (LDL-C) plasma levels. We previously observed that treatment of dyslipidemic subjects with nutraceutical combination containing red yeast rice (monacolin K 3.3 mg), Berberis aristata cortex extract (Berberine 531.25 mg) and Morus alba leaves extract (1-deoxynojirimycin 4 mg) (LopiGLIK®) did not alter the plasma PCSK9 levels. Thus, the aim of the present study was to investigate the effect of these three components on PCSK9 expression in HepG2 cell line in relationship to their effects on LDL-C cellular uptake. HepG2 cell line were incubated with Berberis aristata cortex extract (BCE), red yeast rice (RYR) and Morus alba leaves extract (MLE) alone or in combination for 24 h. RYR (50 µg/mL) increased PCSK9 protein expression (WB and ELISA assays), PCSK9 mRNA and its promoter activity. BCE (40 µg/mL) reduced PCSK9 expression, mRNA levels and promoter activity. MLE determined a concentration-dependent inhibition of PCSK9 at mRNA and protein levels, with a maximal reduction at 1 mg/mL; no significant changes in PCSK9 promoter activity were found. MLE also downregulates the expression of fatty acid synthase and HMG-CoA reductase mRNA levels. The combination of RYR, BCE and MLE reduced PCSK9 at mRNA, protein, and promoter activity. Finally, this combination induced the LDL receptor and LDL-C uptake by HepG2 cells. In conclusion, the positive effect of MLE on PCSK9 supports the rational of using this nutraceutical combination to control hyperlipidemic conditions.

The recent increase in global consumption of rice has led to increased demand for sustainable water management in paddy cultivation. In this study, we propose an enhanced paddy simulation module to be introduced to Soil and Water Assessment Tool (SWAT) to evaluate the sustainability of paddy cultivation. The enhancements added to SWAT include: (1) modification of water balance calculation for impounded fields, (2) addition of an irrigation management option for paddy fields that are characterized by flood irrigation with target water depth, and (3) addition of a puddling operation that influences the water quality and infiltration rate of the top soil layer. In a case study, the enhanced model, entitled SWAT-Paddy, was applied to an agricultural watershed in Japan. The results showed that the SWAT-Paddy successfully represented paddy cultivation, water management, and discharge processes. Simulated daily discharge rates with SWAT-Paddy (R² = 0.8) were superior to the SWAT result (R² = 0.002). SWAT-Paddy allows the simulation of paddy management processes realistically, and thus can enhance model accuracy in paddy-dominant agricultural watersheds.

Overexpression of a constitutively active truncated form of OsCDPK1 (OEtr) in rice produced smaller seeds, but a double-stranded RNA gene-silenced form of OsCDPK1 (Ri) yielded large seeds, suggesting that OsCDPK1 plays a functional role in rice seed development. In the study presented here, we propose a model in which OsCDPK1 plays key roles in negatively controlling the grain size, amylose content, and endosperm appearance, and also affects the physicochemical properties of the starch. The dehulled transgenic OEtr grains were smaller than the dehulled wild-type grains, and the OEtr endosperm was opaque and had a low amylose content and numerous small loosely packed polyhedral starch granules. However, the OEtr grain sizes and endosperm appearances were not affected by the temperature being either optimal (25 °C ) or low (22 °C) or high (31 °C) during the grain-filling phase. In contrast, the transgenic Ri grains were larger, had higher amylose contents, and had more transparent endosperms filled with tightly packed polyhedral starch granules. This demonstrates that OsCDPK1 plays a novel functional role in starch biosynthesis during seed development and affects the transparent appearance of the endosperm. These results improve our understanding of the molecular mechanisms through which the grain filling process occurs in rice.

Cadmium accumulation in rice grain poses a serious threat to people’s health. Understanding the genetic basis on grain cadmium accumulation facilitates efforts to reduce it. Here, we show that OsCd1 is involved in Cd uptake and contributes to grain accumulation in rice. Natural variation in OsCd1 with a missense mutation Val449Asp is responsible for the divergence of rice grain cadmium accumulation between japonica and indica. Notably, near-isogenic line tests confirmed that the indica variety carrying the OsCd1^V449 allele could reduce the grain cadmium accumulation. The favorable allele OsCd1^V449 may be an important genetic resource to reduce grain cadmium accumulation for indica.

Sustainable innovation in the agro-food system has become a strategy increasingly used by companies as a means to increase their competitiveness and position themselves in the market. In this context, the objective of this work is to identify the attitudes and sensory perceptions of consumers towards sustainable food technology through two scales (Food Technology Neophobia and Domain Specific Innovativeness) and hedonic tastings. For this, a new product was selected in the market: powder to prepare rice with milk. Most consumers have attitudes toward low neophobia to products with food technology, but there is also some caution, situation that is corroborated by the moderate predisposition towards innovations. Color and flavor attributes can make the difference in positive perceptions. It should not be forgotten that there is a segment of innovative sustainable consumers that represent a key market.

In this paper, Rice water requirement and irrigation water requirement in Amol agro meteorological Station in 2016-2045 are forecasted based on the projected meteorological data of Hadcm3 under A2 scenario. Rice water requirements are estimated by using crop coefficient approach. Reference evapotranspiration are calculated by FAO Penman-Monteith method. Moreover, the irrigation water requirements are simulated by calibrated CROPWAT model using the meteorological parameters. The results show that both crop water requirement and irrigation water requirement present downward trend in the future. In 2016-2045, the rice water requirement and irrigation water requirement decrease by more than 9.9% under A2 scenario, respectively. Furthermore, the precipitation rise may be the main reason for the decrease in crop water requirement, while significant decrease of irrigation water requirement should be attributed to combined action of rising precipitation and a slight increase in temperature.