Augmented and Virtual Reality have been experiencing a rapidly growth in recent years, but there is not still a deep knowledge on their capabilities and where they could be explored. In that sense, this paper presents a study on the accuracy and repeatability of the Microsoft's HoloLens 2 (Augmented Reality device) and HTC Vive (Virtual Reality device) using an OptiTrack system as ground truth. For the HoloLens 2, the method used was hand tracking, while in HTC Vive, the object tracked was the system's hand controller. A series of tests in different scenarios and situations were performed to explore what could influence the measures. The HTC Vive obtained results in the millimetre scale, while the HoloLens 2 revealed not so accurate measures (around 2 centimetres). Although the difference can seem to be considerable, the fact that HoloLens 2 was tracking the user's hand and not an inherit controller made a huge impact. The results were considered a significant step for the on going project of developing a human-robot interface to program by demonstration an industrial robot using Extended Reality, which shows great potential to succeed based on this data.

Genetic parameters of overreach, term and acuteness in Peruvian Paso horses (PPH) have not been determined to date. It is important to estimate these parameters for application in PPH breeding, therefore, the aim of this study was to estimate the heritability, repeatability, and genetic correlations under field conditions of overreach, term, and acuteness of PPHs. The study included records of up to 137 stallions and mares. All measurements were recorded in MP4 video format with a resolution of 1920 x 1080 megapixels and at 60 frames per second. All traits were measured three times (once per stride), and each trait was analyzed. KINOVEA software version 0.9.5 was used to analyze the measurements. A multivariate repeated measures animal model with sex effect was used to estimate the variance components for each trait using WOMBAT software. The results showed heritability of 0.411, 0.476 and 0.405, for the traits of overreach, term, and acuteness, respectively. Repeatability was high in all traits (> 0.78). Genetic additive correlations ranged from -0.30 to 0.49. It can be concluded that overreach and term have high heritability values, which allows these traits to respond better in a selection process, unlike acuteness which has a moderate heritability value.

Accumulating reports have suggested that an inability to clear dead cells is a cause of inflammation and cancer and that the fascia is associated with cancer metastasis. Novel corpuscle-connected filiform structures (CCFSs) entangled on the fascia of the internal organs of rats were selectively visualized with high repeatability (93%) under vital staining with Janus Green B (JGB). Serial sections of CCFSs stained with haematoxylin and eosin and with Mattson Trichrome were microscopically examined. In parallel, the immunohistochemistry with CD31, Lyve 1, scanning electron microscopy, and transmission electron microscopy (TEM) were also used to investigate the novel properties of the CCFSs. All of the CCFSs enclosed JGB-stained granules, which was verified by the impromptu coupling of stereo and light microscopes and fluorescence-activated cell sorting. The functions of the CCFSs were discovered under fluorescence microscopy and confocal laser scanning microscopy to be implicated in cell death: fragmented DNAs and f-actins with extracellular DNAs. The dead cells in the CCFSs were verified by using terminal deoxynucleotidyl transferase dUTP nick end labelling and TEM. Moreover, the CCFS had a relatively-high concentration of calcium, a main element for cell death in tissue, which was measured in 2-dimensionally images using time-of-flight secondary ion mass spectrometry. Taken these results, we report for the first time that novel reticular CCFSs are widely entangled on the fascia of the internal organs of rats with the implication for cell death.

The article aims to present the possible use of the simple modified optical training kit as a low-cost, simple setup for high precision surface speed measurements. A measurement capability evaluation of the optical Doppler kit used for velocimetry of a fast-rotating reflecting surface is presented. To get high repeatability measurements, we modified a fibre optic interferometry training kit. By using signal processing and statistics a precision under repeatability conditions of measurements was evaluated. Expressed by the standard deviations (3σ’s) the surface velocity measurements precision below 0.2 m/s is shown. The Cg’s capability indices were also evaluated. We postulate, the electric circuit stability of the measurement system power supply is essential for a signal noise reducing process for a wide range of metrology systems. It is crucial for precision measurements.

Radiomics involves the extraction of information from medical images not visible to the human eye. There is evidence these features can be used for treatment stratification and outcome prediction. However, there is much discussion about the reproducibility of results between different studies. This paper studies the reproducibility of CT texture features used in radiomics, comparing two feature extraction implementations namely Matlab toolkit and Pyradiomics when applied on independent datasets of CT scans of patients i) the open access RIDER dataset containing a set of repeat CT scans taken 15 minutes apart for 31 patients (RIDER Scan 1 and Scan 2 respectively) treated for lung cancer and ii) the open access HN1 dataset containing 137 patients treated for head and neck cancer. Gross tumor volume (GTV) manually outlined by an experienced observer available on both datasets was used. 43 common radiomics features available on Matlab and Pyradiomics were calculated using 2 intensity-level quantization methods with and without an intensity threshold. Cases were ranked for each feature for all combinations of quantization parameters and the Spearman’s rank coefficient, rs, calculated. Reproducibility was defined when a highly correlated feature in the RIDER dataset also correlated highly in the HN1 dataset and vice versa. 29 out of 43 reported stable features were found to be highly reproducible between Matlab and Pyradiomics implementations, having consistently high correlation in rank ordering for RIDER Scan 1 and RIDER Scan 2 (rs > 0.8). 18/43 reported features were common in RIDER and HN1 datasets, suggesting they may be agnostic to disease site. Useful radiomics features should be selected based on reproducibility. This study identified a set of features that meet this requirement and validated the methodology for evaluating reproducibility between datasets.

This report describes the collection of a large dataset (6930 measurement) on dimensional error in the fused deposition modeling (FDM) additive manufacturing process for full-density parts. Three different print orientations were studied, as well as seven raster angles (0°, 15°, 30°, 45°, 60°, 75°, and 90°) for the rectilinear infill pattern. All measurements were replicated ten times on ten different samples to ensure a comprehensive dataset. Eleven polymer materials were considered: acrylonitrile butadiene styrene (ABS), polylactic acid (PLA), high-temperature PLA, wood-composite PLA, carbon-fiber-composite PLA, copper-composite PLA, aluminum-composite PLA, high-impact polystyrene (HIPS), polyethylene terephthalate glycol-enhanced (PETG), polycarbonate, and synthetic polyamide (nylon). The samples were ASTM-standard impact testing samples, since this geometry allows the measurement of error on three different scales; the nominal dimensions were 3.25mm thick, 63.5mm long, and 12.7mm wide. This dataset is intended to give engineers and product designers a benchmark for judging the accuracy and repeatability of the FDM process for use in manufacturing of end-user products.

The monophyly of Nymphaeaceae (water lilies) represents a critical question in understanding the evolutionary history of early-diverging angiosperms. A recent plastid phylogenomic investigation claimed new evidence for the monophyly of Nymphaeaceae, but its results could not be verified from the available data. Moreover, preliminary gene-wise analyses of the same dataset provided partial support for the paraphyly of the family. The present investigation aims to re-assess the previous conclusion of the monophyly of Nymphaeaceae under the same dataset and to determine the congruence of the phylogenetic signal across different plastome genes and data partition strategies. To that end, phylogenetic tree inference is conducted on each of 78 protein-coding plastome genes, both individually and upon concatenation, and under four data partitioning schemes. Moreover, the possible effects of various sequence variability and homoplasy metrics on the inference of specific phylogenetic relationships are tested using multiple logistic regression. Differences in the variability of polymorphic sites across codon positions are assessed using parametric and non-parametric analysis of variance. The results of the phylogenetic reconstructions indicate considerable incongruence among the different gene trees as well as the data partitioning schemes. The results of the multiple logistic regression tests indicate that the fraction of polymorphic sites of codon position 3 has a significant effect on the recovery of the monophyly of Nymphaeaceae. Taken together, these results indicate that the monophyly of Nymphaeaceae currently remains indeterminate, and that specific phylogenetic conclusions are strongly dependent on the precise plastome gene, data partitioning scheme, and codon position evaluated. In closing, I discuss the importance of archiving all data of an investigation in publicly accessible data repositories, along with sufficient details to replicate the published results, and provide recommendations on future plastid phylogenomic investigations of Nymphaeales.