Cloud computing refers to applications delivered as services over the Internet. Cloud systems employ policies that are inherently dynamic in nature and that depend on temporal conditions defined in terms of external events, such as the measurement of bandwidth, use of hosts, intrusion detection or specific time events. In this paper, we investigate an optimized resource management scheme named v-Mapper. The basic premise of v-Mapper is to exploit application-awareness concepts using software-defined networking (SDN) features. This paper makes three key contributions to the field: (1) We propose a virtual machine (VM) placement scheme that can effectively mitigate the VM placement issues for data-intensive applications; (2) We propose a validation scheme that will ensure that a service is entertained only if there are sufficient resources available for its execution and (3) We present a scheduling policy that aims to eliminate network load constraints. An evaluation was carried out with various benchmarks and demonstrated that v-Mapper shows improved performance over other state-of-the-art approaches in terms of average task completion time, service delay time and bandwidth utilization. Given the growing importance of supporting large-scale data processing and analysis in datacentres, the v-Mapper system has the potential to make a positive impact in improving datacentre performance in the future.

The stormwater drainage problem is one of the major challenges facing in Shire Endaslasse town, Ethiopia. In a town, Street flooding and overtopping drainage system problems are occurring during the rainy season. This causes ponding which poses difficulties in ease of transportation and it hinders the day-to-day activity of the people. So, the study focuses on the performance of the stormwater drainage system in Shire Endaslasse town using Arc GIS and SWMM5.1. For this study, the primary data were collected by field surveys and interviews with the council body. Simulation results for storm events show that in some of the drainage systems in different regions of Shire Endaslasse town have flooded. During the field observation, the drainage structures are filled with solid wastes, inadequate inlet and outlet structures and some of the top element of the manhole have been broken this may cause a problem of aesthetic and healthy at large it may increase flood risk. The flooding risk in the drainage systems is very high due to the drainage system is undersized to cope with the current rainfall rates, but also is very limited to face the upcoming predicted rainfall.

Everyone should therefore consistently get access to enough and safe water. The operation of the existing distribution network as well as the proper optimization and implementation of the new distribution systems are required for a sufficient and safe water supply. In Sekota town sufficient amount of water was not reached to the beneficiaries due to shortage of water at the source. The primary goal of this study was to evaluate the performance and optimize the existing Sekota water supply distribution system using Bentley Water GEMS.The system's hydraulic modeling is carried out by considering as a continuous supply system, and the evaluation procedure used the extended period simulation approach after calibration was done. Calibration is used to ensure the performance of the model using the observed pressure values. The output of the existing system shows pressure is very high means above the maximum pressure and velocity is very low at peak hour demand. The results of velocity and pressure before optimization have negative effect on the performance of the system. The number of pipes and junctions their velocities and pressures which were in admissible ranges are 15 and 42 pipes for velocities and zero and 59 junctions for pressure before and after optimization were evaluated respectively.

Nowadays, energy saving is considered a key issue worldwide, as it brings a variety of benefits: reducing greenhouse gas emissions, reducing demand for energy imports, and lowering costs on a household and economy-wide level. Researchers and building designers are looking to optimize building efficiency by means of new energy technologies. Changes in existing buildings can also be made to reduce energy consumption and costs. These may include the usage of new heat transfer fluids based on nanofluids. In this work, an extended experimental campaign (from February 2020 to March 2021) has been carried out on an educational building in the Campus of University of Salento, Lecce – Italy, in order to evaluate the increase in performance of the HVAC system, due to the usage of a nanofluid. The results show that, under optimal operating conditions, plant performance improves more than 10%, with average daily peaks of about 15%.

This study aims to develop a performance evaluation system that can facilitate performance evaluation at region, hospital, and department levels to enable better cost management for sustainable development. A multi-level system of performance evaluation informs a hierarchical assessment of cost management from regions to hospitals to departments using diagnosis-related group (DRGs). Various metrics are developed employing the variances between targets and actuals where targets are determined from two perspectives: benchmarking using external regional prices and change management using internal data. Targets for the latter are statistically based and specifically incorporate variability. The model is applied to two hospitals, twenty departments, nine DRGs and 1071 inpatients. The analyses indicate that the approach can provide a practical evaluation tool that allows for particular characteristics at multiple levels. The system provides macro-micro and external-internal perspectives in performance, enabling high-level variances to be decomposed thereby identifying sources of performance variability and financial impact.

Risk management strategies protect the company as a whole as well as employees from unforeseen financial impacts. As in the case of personal finance, preparing for certain scenarios helps to face any difficulties that the company may encounter and allows it to get out of this impasse.For any project to be successful, the way the project executing agency will deal with potential risks must be determined so that it can identify, mitigate or avoid problems when it needs to do so. Successful project managers realize that risk management is important, because the achievement of project objectives depends on planning, preparation, results and evaluation that contribute to the achievement of strategic goals, especially the sustainable development of societies.Risk management strategies work to protect the company as a whole as well as employees from unexpected financial effects, and as is the case in personal finance, preparing for certain scenarios helps to face any difficulties that the company may face and allows it to get out of this impasse.To ensure the success of your project, determine how you will handle potential risks so that you can identify, mitigate or avoid problems when you need to do so. Successful project managers understand that risk management is important, because the achievement of project objectives depends on planning, preparation, results, and evaluation that contribute to the achievement of strategic objectives.

There is increasing interest in automating train operations of mainline services, e.g. to increase network capacity. Automatic train operation (ATO) is already achieved by several pilot projects, but not implemented on a large scale. Before the general introduction of new or adapted technologies can have a transformative effect on the operation of such a complex system as train operation on mainlines, they have to pass functional, interoperability and performance tests. A virtual preliminary analysis is one way to ensure a smooth as well as safe introduction and implementation. This paper aims to present an approach that applies to the performance testing of ATO systems. Therefore, methods and test standards for technologies enabling automatic operation in other transport sectors are reviewed. The main findings have been adapted, transformed and combined to be used as a general strategy for virtual performance testing in the railway sector. Specifically, universal performance indicators, namely punctuality, accuracy, energy consumption, safety and comfort, are presented. A layer model for scenario description is adapted from the automotive sector, as well as the definition of different scenario types. Lastly, factors that can influence the performance of an ATO algorithm are identified. To demonstrate the developed approach, a straightforward investigation of a case study is conducted using a microscopic train simulator in combination with an ATO algorithm.

The paper highlights the performance of the seismic isolation devices, installed on retrofitted buildings in reducing the seismic response when subjected to earthquakes. Two buildings from the beginning of the XX-th century in Bucharest are chosen from many more, monitored over the city area. We discuss the response of these base-seismic isolated structures, relying on good quality data acquired from the recent strong earthquake (03.11.2022, MW = 5.0). Elastic response spectra computed from recordings at two levels of each structure are used, placed under and right above the isolating layer. At one building the existence of previous recordings and the particularity of the sensors allow a comparison with other two relatively recent medium intensity earthquakes. The assessment is carried out in terms of maximum acceleration amax, measured at certain levels in each structure, spectral acceleration amplitude SAmax and spectral-peak corresponding period. We find that the base-isolation methodology is effective in reducing the response of the building right above the isolating layer, an observation valid for both structures, all components of the recordings, and spectral acceleration values. Moreover, the outcomes from the modal evaluation performed prior to rehabilitation and seismic isolation process are presented, by pointing out a higher newly acquired fundamental period of the isolated structures.

Top performance in team sports attracts the attention from the general public. In particular, the best players became incredibly skilled and physically powerful, a fact that potentiates to deliver a product considered attractive, exciting and competitive. Not surprisingly, this is a very valuable product from an economic and social standpoint, thus, all sports professionals are extremely interested in developing new procedures to improve sports performance. Besides, the great interests of the various stakeholders (owners, CEO-s, agents, fans, media, coaches, players, families and friends) are one of the main reasons for this development of sports science umbrella and the accompanying sports industry. all their personal performances should be coordinated and put into function by the sports team. In this scientific and applied manuscript, we will deal primarily with the individual treatment of players in order to improve their personal performance and, consequently, team sport performance.

Life Cycle Cost Analysis is a method used to assess long-term economic efficiency among equivalent competing processes or products. The purpose of the paper is to investigate the nature and level of costs for an organic orchard located in Southern Romania, using a complex approach covering the entire chain of production, through the life span. The research results, based on a dynamic analysis and an integrated evaluation of the orchard's performance, have been ranked on investment and operational costs, broken down on three categories (establishment and production, post-harvest and transport costs). The highest cost, representing 151726 euros/ha/20 years, about 52.72% of the total operational costs and 50.4% of the total farm costs/ha/20 years, was recorded in exploitation stage. The scenarios for the sensitivity analysis considered different levels of average yield (40, and, respectively 60 tons/ha) with different rate of sold production (85%, optimistic scenario; 70%, pessimistic scenario). The hotpoints identified at the production stage were use of agricultural machinery, several pesticides, the costs of seedlings, anti-hail net, plastic boxes and labor cost, while at the post-harvest stage, were those related to labor and energy consumption. The transport stage has had important costs with tractor operation and the track.

With the increased emphasis on competition in academic settings, anxiety is becoming more common, which inevitably has some impact on students’ learning process and result. This study aimed to explore how competition-induced anxiety influences the subjective cognitive load (SCL), attention level and test score. Meanwhile, we investigated the mediating role of the behavioral inhibition system/behavioral activation system (BIS/BAS) in those processes. A total of 101 college students were recruited in Study 1 to learn five micro-lectures from massive open online courses (MOOC) under with and without competitive conditions. The results showed that participants’ state anxiety (SA) scores were higher after the experiment, participants in the competition condition had higher test scores, and the relationship between SA/ trait anxiety (TA) and SCL could be mediated by the BIS. To obtain more objective data on learning processes (attention levels), we conducted Study 2, which collected behavioral and EEG data from 42 college students during the online learning. The results showed that the competition group had higher SA, lower attention levels, and worse test scores, and the relationship between SA/TA and attention levels could be mediated through the BIS. The present study not only expands previous research by finding that BIS functioning plays an important role in the effects of anxiety on cognitive load and attention, but also offers implications for using competitive strategies to motivate students according to their aptitude.

The Australian Bureau of Meteorology offers a national operational 7-day ensemble streamflow forecast service covering regions of high environmental, economic and social significance. This semi-automated service generates streamflow forecasts every morning and is seamlessly integrated into the Bureau's Hydrologic Forecasting System (HyFS). Ensemble rainfall forecasts, European Centre for Medium-Range Weather Forecasts (ECMWF) and Poor Man's Ensemble (PME), available in the Numerical Weather Prediction (NWP) suite, are used to generate these streamflow forecasts. The NWP rainfall undergoes pre-processing using the Catchment Hydrologic Pre-Processer (CHyPP) before being fed into the GR4H rainfall-runoff model, which is embedded in the Short-term Water Information Forecasting Tools (SWIFT) hydrological modelling package. The simulated streamflow is then post-processed using the Error Representation and Reduction In Stages (ERRIS). We evaluated the performance of the operational rainfall and streamflow forecasts for 96 catchments using four years of operational data between January 2020 and December 2023. Performance evaluation metrics included CRPS, relative CRPS, CRPSS, and PIT-Alpha for ensemble forecasts and NSE, PCC, MAE, KGE, PBias and RMSE and three categorical metrics CSI, FAR and POD for deterministic forecasts. The skill scores CRPS, relative CRPS, CRPSS and PIT-Alpha, gradually decreased for both rainfall and streamflow as the forecast horizon increased from Day 1 to Day 7. A similar pattern emerged for NSE, KGE, PCC, MAE and RMSE as well as the categorical metrics. Forecast performance also progressively decreased with the higher streamflow regime. Most catchments showed positive performance skills, meaning the ensemble forecast outperformed climatology. Both streamflow and rainfall forecast skills varied spatially across the country – and were generally better in the high runoff generating catchments, and poorer in the drier catchments situated in the western part of the Great Dividing Range, South Australia and mid-west of Western Australia. We did not find any association between model forecast skill and the catchment area. Our findings demonstrate that the 7-day ensemble streamflow forecasting service is robust and draws great confidence from agencies that use these forecasts to support decisions around water resources management.

Legacy IPv4 networks are strenuous to manage and operate. Network operators are in need to minimize the capital and operational expenditure of running network infrastructure. The implementation of Software-defined networking (SDN) addresses those issues by minimizing the expenditures in the long run. Legacy networks need to integrate with the SDN networks for the smooth migration towards the fully functional SDN environment. In this paper, we compare the network performance of the legacy network with the SDN network for IP routing in order to determine the feasibility of the SDN deployment in the Internet Service provider (ISP) network. The simulation of the network is performed in the Mininet test-bed and the network traffic is generated using distributed Internet traffic generator. Open network operating system is used as a controller for the SDN network in which SDN-IP application is used for IP routing. Round trip time, bandwidth, and packet transmission rate from both SDN and legacy networks are first collected and then the comparison is done. We found that SDN-IP performs better in terms of bandwidth and latency as compared to legacy routing. The experimental analysis of interoperability between SDN and legacy networks shows that SDN implementation in production level carrier-grade ISP network is viable and progressive.

This paper formulates the performance evaluation of cloud services as a multicriteria group decision making problem, and presents a fuzzy multicriteria group decision making method for evaluating the performance of cloud services. Interval-valued intuitionistic fuzzy numbers are used to model the inherent subjectiveness and imprecision of the performance evaluation process. An effective algorithm is developed based on the technique for order preference by similarity to ideal solution method and the Choquet integral operator for adequately solving the performance evaluation problem. An example is presented to demonstrate the applicability of the proposed fuzzy multicriteria group decision making method for solving the multicriteria group decision making problem in real world situations.

Little information is available in the literature on the use of cactus pear meal in poultry diets being important to evaluate diets that provide excellent performance and lower production costs. Our objective was to study the use of cactus pear meal in diets of laying hens. In the first study, two diets for male and female chicks were used - 1: 80% reference diet + 20% Miúda cactus pear meal (CPM) and 2: 80% reference diet + 20% Gigante cactus pear meal. The variety Miúda provid-ed better use of metabolizable energy, digestibility coefficient of dry matter, protein, and min-eral matter. In the second study, a control diet was compared to three diets with different levels of CPM for laying hens, in the proportions of 3%, 6% and 9%. No significant differences were found in productive performance. However, there were significant differences in egg quality, texture and color profile of the cooked yolk, egg composition, fatty acids and cholesterol in the yolk. It is possible to use 9% of CPM in the diet of laying hens in semi-intensive system not compromising performance and egg quality, and using 3% of CPM provides higher economic return.

Solar energy is a renewable and sustainable source of energy, and it has been used in addition of specified technologies, such as solar cooling. The demand for cooling continues to increase in line with environmental changes and a greater desire for human comfort. This study primarily aimed to analyze the performance of an evaporative cooling system powered by solar energy and assess the economic and environmental impact of this system. In this system, hot, dry incoming air is used to evaporate water, thus transforming part of its sensitive heat into latent heat without any variation in enthalpy or total heat. The outputted air then has a lower temperature and a greater humidity, thus providing a more comfortable, healthier environment for its users. To achieve this study’s objectives, numerical code was developed and implemented in MATLAB. The obtained results reveal that the efficiency of the evaporative cooler exceeds 90%, with maximum efficiency being reached at a high wet-bulb depression, while minimum efficiency was observed when the dry air has a high relative humidity and a low dry-bulb temperature.

Bitumen is produced from non-renewable natural resources, continuously deplete and intrigues researchers to look for alternative binders. Annually, tons of waste engine oil (WEO) and crumb rubber (CR) are discarded unsustainably and pose a significant environmental threat. Adding these industrial waste products to asphalt provides a safe and cost-effective way for their disposal and improves the bitumen's performance in parallel. This study uses various combinations of waste engine oil and crumb rubber with 60/70 penetration grade bitumen to produce a partially synthetic bitumen. Adhesion being one of the critical characteristics of the bituminous binder has been assessed using the bitumen bond strength test along with physical and rheological properties. Results showed that waste engine oil with crumb rubber inclusion increases penetration and decreases the softening point, viscosity, complex modulus, and bonding strength. Additionally, polyphosphoric acid (PPA) in smaller dosages was also incorporated into the optimum percentage of CR + WEO to improve the properties of the binder. The results confirm that binder modification with waste engine oil and crumb rubber can be more effective with PPA. It is concluded that 35% of waste can replace the virgin binder giving a cost-effective and environmentally friendly solution.

Like the most of crops, especially sugarcane needs to be kept upright until it is harvested. Because, lodging of sugarcane has a significant negative effect on cane yield and sugar content of sugarcane. To keep sugarcane upright earthing up is an utmost intercultural operation. In Bangladesh, most of the operations for sugarcane cultivation including earthing up are generally done in traditional method using human labor which increases production costs as well as reduces the income of sugarcane growers. So, a cost effective two-wheeled tractor (2WT) mounted earthing up machine was developed in Bangladesh Sugarcrop Research Institute (BSRI), Pabna to reduce drudgery and cost of sugarcane production. Field tests were conducted in experimental sugarcane field at BSRI and technical and economic performances of the developed earthing up machine were also carried out based on the field test. Average effective field capacity and field efficiency were found 0.16 ha/hr and 77.41 %, respectively for the developed earthing up machine. The earthing up machine was not found economically viable when it is used only for earthing up operation. Besides, when the 2WT was being used as the main driver for other activities including earthing up operation, then the earthing up machine becomes economically beneficial with net cash flow, net present value, internal rate of return, benefit-cost ratio and payback period of BDT 148497/ha, BDT 23184, 3%, 3.81:1 and approximately 1 year, respectively. On the contrary, considering cost of only earthing up tool without 2WT, then it was found economically beneficial with net cash flow, internal rate of return, net present value, benefit-cost ratio and payback period of BDT 16428/ha, BDT 3053, 4.7%, 2.71:1 and approximately 2 years, respectively. Since 2WT is commonly used for versatile farming purposes. Therefore, versatile use of 2WT as prime mover for other machines including earthing up machine can make earthing up machine economically viable and beneficial for sugarcane growers.

Literature revealed the potential of using guayule resin for asphalt cement replacement from the binder’s perspective. However, monitoring guayule resin through binder-aggregate mixture could disclose its performance through field. In this study, designated binders were employed to investigate the applicability of such an innovative replacer through mixture, which were neat asphalt and guayule-based binders (neat guayule, asphalt-rubber-guayule, guayule-rubber binders). Consecutively, field-simulated lab mixtures were prepared to investigate the major distresses. Moisture damage, rutting, fatigue cracking, and thermal cracking resistances were investigated using the modified Lottman (TSR) test, rut test by asphalt pavement analyzer (APA), semi-circular bending (SCB) test, and disk-shaped compact tension (DCT) test, respectively. Additionally, the Hamburg wheel-tracking (HWT) test was employed to evaluate moisture susceptibility and rutting resistance. Outcomes revealed that the neat guayule was susceptible to moisture damage at a 7% air content (V_a) when the TSR test was employed. In contrast, all investigated mixtures yielded perfect performances against moisture susceptibility under the HWT test. Guayule-based mixtures perfectly resisted rutting, as analyzed by the rut test and HWT test. Generally, changing parameters (e.g., V_a, rubber addition, and partial asphalt replacement by guayule and rubber) enhanced the guayule-based mixture resistance to rutting and moisture damage resulting in acceptable performances. Guayule-based mixture had a high fracture toughness at low temperatures, hence fatigue fracture resistance at intermediate temperatures. Neat guayule mixture with or without rubber addition did not entirely resist thermal fracture. However, partial asphalt replacement by guayule and rubber resisted the thermal fracture to a great extent.

Three-temperature heating systems consist of a heat engine and a heat pump, enabling thus maximum usage of the primary thermal source for the heating of buildings. This analysis has revealed obvious advantages and disadvantages that the combining of thermodynamic systems has in future development, also with respect to environmental and economic issues. It appears that the combination of a Stirling engine or a similar heat drive with a heat pump is especially suitable. In order to analyze the effectiveness of such a system, a comprehensive calculation procedure is used: its basis lies in accounting for all types of energy and their relationship to the original natural resource. The present paper aims to point out that the combination of Stirling engine and a heat pump is a useful solution thanks to the most favorable resultant economic impact if compared to the usage of a diesel, four-stroke gas, or, most commonly used, electric drive.

While providing safe water for the rural poor is considered a basic human right, there are numerous issues associated with existing technologies with shortcomings. Performance issues have continued to fail to meet the needs of impoverished families due to issues including high cost, difficulties with performance, and continuing needs for maintenance. These issues have severely interfered the safe water accessibility. Key aspects of the Guelph Water Filter (GWF) system can avoid/minimize many of these issues. The GWF as described herein enables delivery of low cost, long-term performance at 3Log removal of E.coli and can deliver 1 to 3 L of treated water per hour. The GWF is simple to operate, has an ability to provide sufficient water for a family, maintains longevity of performance, is easy to maintain and has protection against breakage during the cleaning process, is repairable at village level, and operates using a sizable reservoir of water to supply raw water, meaning the technology does not need to be refilled frequently. Hence, the capability of the novel GWF technology is shown to bypass many of the troublesome features of alternative low-tech water treatment technologies. The potential for the GWF to function for 2 days continuously avoids the need for young girls to fetch raw water frequently during a day, thereby enabling them to attend school. Hence, the GWF enhances the potential to result in ‘safe water and full schools’, providing the opportunity for girls to receive education and capture socio-economic benefits for the community.

The performance evaluation of the Internet of Things (IoT) based supply chain is challenging due to the involvement of multiple decision makers, the multi-dimensional nature of the evaluation process, and the existence of uncertainty and imprecision in the decision making process. To ensure effective decisions are made, this paper presents a fuzzy multicriteria analysis model for evaluating the performance of IoT based supply chain. The inherent uncertainty and imprecision of the performance evaluation process is adequately handled by using intuitionistic fuzzy numbers. A new algorithm is developed for determining the overall performance index for each alternative across all criteria. The development of the fuzzy multicriteria group decision making model provides organizations with the ability to effectively evaluate the performance of their IoT based supply chains for improving their competitiveness. An example is presented for demonstrating the applicability of the model for dealing with real world IoT-based performance evaluation problems.

Supplements in fish nutrition can help alleviate pressure on the wild stock; however, there is limited information on the benefits of rooibos tea extract in aquafeed. This study aimed to determine the effect of rooibos tea extract inclusion in the commercial diet on the growth performance of larval fish. Fish were reared on three diets: a commercial diet with 30% fermented or green rooibos extract and a commercial tilapia diet (control). Fish (initial weight of 0.54 ± 0.008 g and length of 2.22 ± 0.01 cm) were randomly distributed into recirculating aquaculture systems in triplicates at 100 fish per tank. Fish was hand-fed thrice daily for eight weeks at 2% body weight. After that, samples were withdrawn to measure growth parameters. Fish-fed fermented, and green tea extracts exhibited a significantly (p ˂ 0.05) higher weight gain than the controls. The feed conversion ratio was higher in the control group, fermented (1.50 ± 0.25 cm) and green tea (1.41 ± 0.07 cm). Similarly, the control group exhibited the highest condition factor (K=13.14 ± 4.87). The two treatment groups were comparable (p >0.05) in growth performance. Overall, the evidence indicates that adding rooibos tea extracts to the basal diet can improve fish growth.

Disease detection and prediction have been one of the most frequent uses of machine learning models in the last decade, and Parkinson's disease is no exception. It is common for people in their old age to have one form of disease or another depending on the circumstances in which they find themselves. This study analyzed and evaluated various supervised machine learning models to detect the presence of Parkinson's disease in elderly individuals. An extreme gradient boosting model, along with other models, such as naïve Bayes, random forest, K-nearest neighbor, and support vector machine (SVM), was implemented to determine the best outcome. The extreme gradient boosting (XGBoost) model is a powerful boosting machine learning technique, particularly in terms of speed and accuracy. The results showed that the XGBoost model, which is an optimized version of the other boosting models, is capable of projecting the presence of Parkinson's disease with very high accuracy compared to other algorithms. The implemented classification algorithm extreme gradient boosting method achieved approximately 98 % accuracy, 97.5 % precision, 100.0 % recall, and 98.7% f1-score which are high compared with the results found in the existing literature.

Background: The duration of the vaccine's protective efficacy against SARS-CoV-2 is unknown. Evaluation of the clinical performance of available tests is required. Objectives: To evaluate the clinical performance of three immunoassays for the detection of IgG antibodies generated by mRNA vaccines against SARS-CoV-2. Methods: Two automated immunoassays (Euroimmun Anti-SARS-CoV-2 ELISA IgG and Abbott SARS-CoV-2 CLIA IgG) and one lateral flow immunoassay (LFIA Test Livzon IgG) were tested. 300 samples distributed in 3 groups were analyzed: 100 subjects over 18 years old and under 45 years old, 100 subjects between 45-65 years old and another 100 over 65 years old. collected before vaccination, at 21 days, 1, 2, 3 and 6 months post-vaccination. Sensitivity, specificity, positive predictive value, negative predictive value, positive likelihood ratio, negative likelihood ratio, and agreement (I. Kappa) were calculated for each serological test. Results: Maximum sensitivity for IgG was 98.7%, 98.1%, and 97.8% for the ELISA Euroimmun, CLIA Abbott, and Livzon LFIA assays and maximum specificity for IgG was 99.4%, 99.9%. % and 98.4% ELISA, CLIA and LFIA respectively at 3 months after vaccination with a decrease in antibody levels from the sixth month. The best agreement was observed between ELISA and CLIA 100%; (k = 1.00). The agreement between ELIA, CLIA and LIFIA was 99% (k = 0964) at the second and third month after vaccination. Seroconversion was faster and longer lasting in the younger age groups. Conclusion: Our study showed an equivalent and homogeneous clinical performance for IgG of three immunoassays after vaccination and that the LIFIA assay is the most cost-effective, reliable and accurate for routine use in population studies of seroconversion and seroprevalence.

Background: The purpose of this study was to evaluate and compare the performance of health, safety and environmental management of civil, traffic and urban services contractors in the 18th district of Tehran municipality in 2015-2016. Methods: This is an applied, longitudinal, descriptive-comparative study. The statistical population of this study was construction contractors, urban services and traffic in the municipality of district 18 of Tehran in the years 2015-2016. from 52 contractors, 18 construction contractors, 21 utilities contractors and 13 traffic contractors, respectively, were selected using census method. the research instrument consisted of periodic direct observation and completion of the HSE standard checklist by researchers. Data were analyzed using Kruskal-Wallis nonparametric test by SPSS software.Results: The HSE performance of all contractors (civil, utilities and traffic) was acceptable and the results of Kruskal-Wallis test showed that the HSE performance of contractors at the second visit of 2015 and the first visit of 2016 was significantly different in favor of civil contractors )p <0.01), but there was no significant difference between the first and third visits of 2015 and the second and third visits of 2016 (p> 0.05). visits in six periods indicate HSE Civil Contractors status increased from 100% unfavorable to 88.88% acceptable level and 11.11% good level, and in the case of civil service contractors who initially had 95.23% in an unfavorable situation and 4.76% in a favorable situation achieved 100% acceptable performance, and finally, the traffic contractors, who were 100% unfavorable, were upgraded to 100% acceptable. Conclusion: According to the findings of the study, it seems that the supervision of municipality inspectors on HSE performance of contractors can be effective in improving and strengthening the commitment to HSE requirements, therefore, it is suggested that periodical visits be made to the municipal contractors.

This experimental study examined the application effect of polycaprolactone (PCL), an organic resin material with excellent elasticity and ductility, on improving the mechanical performance of cellulose nanocrystal (CNC) cement composites. To analyze the effect, a test specimen containing CNC and PCL mixed, containing only CNC, and a control (plain) specimen containing nothing were compared. PCL was compared according to its shape, and in the case of Granules, which is the basic shape, interfacial adhesion with cement was not achieved, so a DCM solution was used to dissolve and use the Granules form. As a method for bonding PCL to the CNC surface, the CNC surface was modified using 3-aminopropyltriethoxysilane (APTES), and surface silylation was confirmed through Fourier transform infrared spectroscopy(FT-IR) analysis. To evaluate the dispersibility according to the application of PCL to the modified CNC, particle size analysis (PSA) and zeta potential analysis were performed according to the PCL mixing amount (0.1, 0.3, 0.5, and 1 vol.% compared with those of CNC) and size distribution. Through the zeta potential value, the highest dispersion stability was shown at 1 vol.%. The cohesive force of CNC was low and the dispersion stability was high according to the application of PCL. According to the results of the dispersion stability evaluation, the degree of hydration of the dissolved PCL 1 vol.%, CNC-only specimens, and plain specimens were analyzed. Hydration products increased by increasing the degree of hydration in the unhydrated area. However, the incorporation of PCL showed a low degree of hydration, and the analysis of strength characteristics also showed a decrease of approximately 27% compared with that of plain specimens. This was because the bonding with SiO2 was not smooth owing to the solvent, thus affecting internal hydration. To investigate the effect of the PCL shape, the compressive and flexural strength characteristics were compared using PCL powder as an additional parameter. The compressive and flexural strength values were improved by approximately 54% and 26%, respectively, compared with those of the plain specimen. Scanning electron microscopy (SEM) analysis determined that the filler effect that made the micropore structure denser, affected the mechanical performance improvement.

The process model is very essential for the model based control design. The model of the process can be identified using system identification algorithm. The system identification is done through the open loop and closed loop approaches. In this work, the lab scale conical tank setup configured as a non square MIMO system. The conical tank system is identified through the both appraoches, the effectiveness and need of the both approaces are discussed. Based on the open loop identified model the controller designed and the controller implemented in the real time the to record the process data. From this data the closed loop identification are conducted uisng N4SID algorithm. The controller seetings are obtained using the smith predcitor based IMC based PI controller for the obtained model. The proposed identification algorithm and controller tuning show the better reults over the conventional method. Moreover, this method is applicable for all the non square MIMO system.

The paper describes and analyzes the performance of a new thermoelectric generation system based on the use of Peltier cells inserted in the ducts of the air conditioning equipment. The hot and cold air streams that flow in the two separated sections of an air conditioning system are used to create a thermal gradient between the two faces of the Peltier cells. Hot and cold air flow inside the A/C unit are driven to a built in thermal chamber where the Peltier cells are placed. Peltier cells are incrusted into an insulation wall that separates the two sections of the chamber through which hot and cold air streams are flowing. The so designed configuration allows the Peltier cells to generate electric current. The study has been run for constant cold air temperature and variable hot air temperature, resulting in a variable performance of the thermoelectric generator. Theoretical study has been completed with experimental tests to determine real performance of the thermoelectric unit. Efficiency of the thermoelectric generator has been found to be linearly dependent on the temperature difference between hot and cold air subsections of the chamber. Maximum efficiency, however, is limited by the hot air stream temperature, since in real conditions ambient temperature cannot overpasses a specific value. For standard operational conditions, 5º C and 45º C for the cold and hot air streams, the thermoelectric generator operates at 44% of the maximum efficiency attainable.

The detrimental consequences of soil pollution caused by crude oil or petroleum products are immense, leading to land degradation, property damage, and rendering agricultural practices ineffective. Extensive research has been conducted in the field of soil remediation, but further studies are still required to explore additional details of the remedial process. As a result, this study focuses on evaluating the effectiveness of Vernonia Galamensis and Vernonia Amygdalina, commonly known as bitter leaf, in remediating hydrocarbon-contaminated soil. In the analysis of micro-organisms, it was found that the bitter leaf extracts contained three types of bacteria: Pseudomonas aeruginosa, Staphylococcus aureus, and Escherichia coli. The leaf extracts were prepared using different methods, including sun drying, room drying, and using them in their wet form, which were then blended into the contaminated soil. The study also took into consideration three different types of soil: sandy-loamy soil, clay soil, and swamp soil. These advanced techniques and considerations are relevant to the topic of revolutionizing soil remediation, as they explore the potential of bitter leaf extracts and different soil types in effectively mitigating the effects of hydrocarbon contamination.The findings revealed that the wet blended extracts of Vernonia performed exceptionally well in the remediation process, surpassing a 50% reduction in the initial contamination levels. The study involved utilizing a quantity of bitter leaf ranging from 10g to 40g, which was added to the contaminated soils and monitored for a duration of 40 days. Remarkably, this approach led to a significant decrease in the concentration of contaminants within the soil, indicating the effectiveness of the bitter leaf extracts in the remediation process. Towards the conclusion of the study, predictive models were constructed to forecast the impact of hydrocarbon content, as well as the levels of lead, zinc, and chromium in the soil. These variables served as the dependent variables in the models, while the mass of bitter leaf, the duration of treatment, and the pH of the soil were considered as independent variables. Significantly, the models achieved a level of significance of less than 0.05, indicating their statistical validity. Furthermore, the r2 value, which represents the goodness of fit, demonstrated an appreciable level of accuracy in predicting the remediation effects. These results highlight the potential of the developed models in assessing and predicting the remedial outcomes of hydrocarbon contamination using bitter leaf extract.

Hermetia illucens is a very promising insect due to its ability to convert low-value substrates in highly nutrient feed. Its feeding and nutrition are important issues. This work aimed to study the effect of different substrates composed of coffee silverskin, by-product of the roasting process, enriched with different inclusion of microalgae (5%, 10%, 20%, 25%), Schizochytrium limacinum and Isochrysis galbana, coupled with the assessment of environmental sustainability by LCA. In general, the inclusion of microalgae caused an increase in the growth performance of the larvae, although S. limacinum showed the best results. Higher prepupal weight were observed in larvae fed on 20% and 25% of S. limacinum, shorter development times in larvae fed on 25% of both S. limacinum and I. galbana and higher growth rate were observed in larvae fed on 25% of S. limacinum. Anyway, the inclusion of 10% of S. limacinum showed a small difference with the higher inclusions. Moreover, the 10% of S. limacinum achieved the best waste reduction index. Therefore, considering the greater inclusion of microalgae, the higher the environmental impact of larvae production, the addition of 10% of S. limacinum seems to be the best compromise for the larval rearing.

This paper introduces a novel approach to addressing the challenge of accurately timing short distance runs, a critical aspect in the assessment of athletic performance. Electronic photoelectric barriers, although recognized for their dependability and accuracy, have remained largely inaccessible to non-professional athletes and smaller sport clubs due to their high costs. A comprehensive review of existing timing systems reveals that claimed accuracies beyond 30 milliseconds lack experimental validation across most available systems.To bridge this gap, a mobile, camera-based timing system is proposed, capitalizing on consumer-grade electronics and smartphones to provide an affordable and easily accessible alternative. By leveraging readily available hardware components, the construction of the proposed system is detailed, ensuring its cost-effectiveness and simplicity. Experiments involving track and field athletes demonstrate the proficiency of the proposed system in accurately timing short distance sprints. Comparative assessments against a professional photoelectric cells timing system reveal a remarkable accuracy of 62 milliseconds, firmly establishing the reliability and effectiveness of the proposed system. This finding places the camera-based approach on par with existing commercial systems, thereby offering non-professional athletes and smaller sport clubs an affordable means to achieve accurate timing.In an effort to foster further research and development, open access to the device's schematics and software is provided. This accessibility encourages collaboration and innovation in the pursuit of enhanced performance assessment tools for athletes.

This research aims to determine the similarities in groups of people to build a film recommender system for users. Users often have difficulty in finding suitable movies due to the increasing amount of movie information. The recommender system is very useful for helping customers choose a preferred movie with the existing features. In this study, the recommender system development is established by using several algorithms to obtain groupings, such as the K-Means algorithm, birch algorithm, mini-batch K-Means algorithm, mean-shift algorithm, affinity propagation algorithm, agglomerative clustering algorithm, and spectral clustering algorithm. We propose methods optimizing K so that each cluster may not significantly increase variance. We are limited to using groupings based on Genre and, Tags for movies. This research can discover better methods for evaluating clustering algorithms. To verify the quality of the recommender system, we adopted the mean square error (MSE), such as the Dunn Matrix and Cluster Validity Indices, and social network analysis (SNA), such as Degree Centrality, Closeness Centrality, and Betweenness Centrality. We also used Average Similarity, Computational Time, Association Rule with Apriori algorithm, and Clustering Performance Evaluation as evaluation measures to compare method performance of recommender systems using Silhouette Coefficient, Calinski-Harabaz Index, and Davies-Bouldin Index.

This research article aims to present implementation and evaluation of the HPPT design based on using multi-parallel pumps switching for yielding performance with reference to potential change of daily irradiance. After that, the curve fitting of the hydraulic performance scenarios is tested to compare the hydraulic energy growth behaviors with reference to exponential and power growth models.

Sentinel-1 satellite system continuously observes European countries in a relatively high revisit frequency of 6 days per orbital track. Given the Sentinel-1 configuration, most areas in Czechia are observed every 1–2 days by different tracks in a moderate resolution. This is attractive for various types of analyses by various research groups. The starting point for processing is an original data provided by ESA, for interferometry (InSAR) this level is a Single Look Complex (SLC) data. This work represents advantages of storing data augmented to a specifically corrected level of data, SLC-C. The presented database contains Czech nation-wide Sentinel-1 data stored in burst units that have been preprocessed to the state of a consistent well-coregistered dataset of SLC-C. These are resampled SLC data with their phase values reduced by a topographic phase signature, ready for fast interferometric analyses (an interferogram is generated by a complex conjugate between two stored SLC-C files). The data can be used directly into multitemporal interferometry techniques, e.g. Persistent Scatterers (PS) or Small Baseline (SB) techniques applied here. A further development of the nation-wide system utilising SLC-C data would lead into a dynamic state where every new pre-processed burst triggers a processing update to detect unexpected changes from InSAR time series and therefore provide a signal for early warning against a potential dangerous displacement, e.g. a landslide, instability of an engineering structure or a formation of a sinkhole. An update of the processing chain would also allow use of cross-polarised Sentinel-1 data, needed for polarimetric analyses. The current system is running at a national supercomputing centre IT4Innovations in interconnection to the Czech Copernicus Collaborative Ground Segment (CESNET), providing fast on-demand InSAR results over Czech territories. A full nation-wide PS processing using data over Czechia has been performed in 2017, discovering several areas of land deformation. Its downsampled version and basic findings are demonstrated within the article.

Solar radiation is closely related to the energy buildings consume for cooling, heating, and lighting purposes. Glazing is the only material of the building envelope that transmits solar radiation and needs to be appropriately designed to reduce energy cㅈonsumption. Currently, smart glass technology is being actively investigated and developed for effective solar radiation control. Among the various types of smart glass, electrochromic glazing is one of the most promising technologies, as it can adjust transmittance on its own, has a wider transmittance range in both the clear and darkened states, and consumes less electricity. Considering the importance of solar radiation adjustment in electrochromic glazing technology, this study attempted to develop an optimal control method for electrochromic glazing. Toward this goal, the solar radiation incident on vertical surfaces and outdoor temperature conditions were controlled in three regions with different climatic characteristics, and the annual cooling, heating, and lighting loads, discomfort glare, and interior illumination were analyzed. This approach enabled the optimal conditions with respect to visual comfort to be determined. Subsequently, the EDPI (Energy and daylight performance index) was used to optimize control conditions for each region, thereby producing integrated evaluations from results with different units and properties. The proposed control method will be utilized to develop a control algorithm and a control system to reduce building energy consumption.

The paper presents the results of energy and environmental analysis of geothermal CHP plant operation in Polish conditions. As the most favorable, for the geothermal conditions prevailing in Poland, the variant of CHP plant based on Organic Rankine Cycle (ORC) has been taken into consideration. As the case study the existing geothermal well located in the town of Konin in the Wielkopolska voivodship has been chosen. The conceptual design of CHP plant has been proposed and evaluated from energy and environmental point of view. As energy performance criteria the non-renewable primary energy consumption has been chosen. In case of environmental performance carbon dioxide emission has been taken as evaluation criteria. The analysis has been performed for different operating conditions and three working fluids.

In this study, a motion control problem for the vessels towed by tugboats or towing ships on the sea is considered. The towed vessels including barge ships are need to have assistance of tugboats. Combining two vessels, some work purposes in the sea or harbor area can be completed. In this study, the authors give newly developed mathematical model and control system strategy. Especially, the system model fully presenting the physical characteristics of two vessels are derived. For controlling the system effectively, it is considered that the towed vessel has no power propulsion system but the rudder is activated to improve the maneuverability. Considering the strong nonlinearities included in the vessel dynamics, the modelled system is presented by nonlinear system without linearization of nonlinear parameters. Thus, the control system for the towed vessel is designed based on the nonlinear control scheme. Exactly, the back-stepping control method is applied to its motion control. Also, the PID control method is applied for comparing with the proposed control strategy.

When drilling oil and gas wells, hole cleaning efficiency is crucial, particularly in the curved or severely deviated sections. Although many hole-cleaning procedures and models have been developed, most of them have substantial limitations or are difficult to apply in real time. This study aimed to develop a model for the hole cleaning index (HCI) that could be integrated into the drilling operations to provide an automated and real-time evaluation of deviated drilling hole cleaning. The new model herein was developed based on the mechanical drilling parameters, enhanced estimated drilling fluid properties, and cuttings characteristics. This HCI model was validated and tested in the field, as it was applied when drilling 12.25”-intermediate directional sections in two wells with a total length of approximately 2000 ft each. The integration of the HCI helped to attain a much better well drilling performance (50% enhancement) and mitigation of potential problems like pipe sticking and the slower rate of penetration. Since the developed index incorporates the changes in wellbore geometry and other spontaneous field data, the new model could be utilized for real-time optimization and intermediate interventions by drilling teams, unlike commercial software tools which are only useful during the planning phase. For this reason, the HCI can be linked to the driller's control panel to provide timely evaluation and corrective measures related to hole cleaning.

This study was conducted generally by aiming assessment of the hydraulic performance of water distribution systems of Addis Ababa Science and Technology University (AASTU). In line with the main objective, this study addressed, (1) pinpointing problems of existing water supply versus demand deficit (2) evaluating the hydraulic performance of water distribution system using water GEMS and (3) recommended alternative methods for improving water demand scenarios. The University’s water supply distribution network layout was a looped system and the flow of water derived by both gravity and pressurized system. The gravity flow served for the academic and administrative staffs whereas the pressurized system of the network fed the students dormitories, cafeteria’s etc. The study revealed the existence of unmet minimum pressure requirement around the student dormitories which accounts 25.64% below the country’s building code standard during the peak hour consumption. The result of the water demand projection showed an increment of 2.5 liter per capita demand (LPCD) in every five years. Hence, first, the university’s water demand was projected and then hydraulic parameters such as; pressure, head loss and velocity were modeled for both the existing and the improved water supply distribution. The finding of the study was recommended to the university’s water supply project and institutional development offices for its future modification and rehabilitation works.

Purpose: This research aims to model a police agency ordering problem based on criteria that measure the performance of operational and logistical variables, using a multicriteria method. Design/methodology/approach: The multicriteria method PROMETHEE II was used, which with the aid of the Visual PROMETHEE software, emulated the systematized data in the impact matrix and produced the final ordering of the most efficient police agencies in equalizing the operational, logistical, financial, and human resources applied in the combating crime and reducing criminal indices. Findings: The results confirmed that the resources made available to police agencies located in different municipalities in the metropolitan region of the state of Rio de Janeiro are better applied by managers compared to police units in the capital of Rio de Janeiro. Research limitations/implications: As implications of the research, it can be inferred that the use of multicriteria methods in modelling problems in ​​public security can contribute to the rationalization of the use of available resources to fight crime in large cities. Research has shown that it is possible to use the multicriteria methodology in ordering police agencies that best equalize the available resources. Practical implications: The practical impact of this research lies in optimizing the resources available to law enforcement agencies in the fight against crime in general. Social implications: The results can influence the decision making of the local government in the allocation of resources, as well as offering sectors of the economy information relevant to local development. Originality/value: The results of the MCDA analysis can be used to help police agencies in Rio de Janeiro, Brazil to be more efficient. In addition, the application of MCDA can be a new approach to measuring the efficiency of police services.

The presented research focused on the evaluation of the novel concept of overmolding technique using self-reinforced composite prepregs and recycled polymer blends. In order to evaluate the effectiveness of the proposed manufacturing technique, several series of materials based on polycarbonate/polyethylene terephthalate (PC/PET) and polycarbonate/polyethylene terephthalate glycol (PC/PETG) blends were prepared. The reinforcing component in the form of overmolded prepreg was made from polyester-based self-reinforced composite (srPET). The prepared materials were compared in terms of mechanical properties and heat resistance; the study was supplemented by thermal analysis measurements (DMTA, DSC). Considering the mechanical characteristics, the overmolding technique turns out to be an effective method of improving the properties of composites, and the increase in impact strength turns out to be particularly beneficial. The increase of the impact strength for overmolded PC/PET blend reached 430 % for PC/PETG sample 330% , while for PC-based composite, only 100%. The expected improvement in thermomechanical properties turned out to be difficult to achieve due to the rapid softening of the srPET prepreg at around 70 °C. However, technological tests and analysis of properties clearly indicated that the use of PC-based blends makes it possible to create a permanent connection with reinforcement based on srPET prepregs, which can significantly expand the potential of applications of this type of materials.

. Identifying students who might have difficulty in their course of studies ahead of time is crucial. There can be many reasons for performance issues, such as personality, family, social, and/or economic. We advocate that educational systems should use machine learning to predict students’ performance based on performance factors. This would allow educational professionals and institutions to put in place a preventive plan to help students towards achievements of their educational goals and success. In this chapter, we propose a student performance prediction method and evaluate its performance. We provide a taxonomy of performance factors that help to gauge students performance from different perspectives and give insights on the categories and features that have more significant impact on students’ performance. The results of this work can be used by education institutions to put in place a student-centric approach to tackle performance issues before they create long-term effects on student’s life. In addition, it will help education policymakers to introduce a tailored approach for the population in specific areas.

Emotion detection from the text is an important and challenging problem in text analytics. The opinion-mining experts are focusing on the development of emotion detection applications as they have received considerable attention of online community including users and business organization for collecting and interpreting public emotions. However, most of the existing works on emotion detection used less efficient machine learning classifiers with limited datasets, resulting in performance degradation. To overcome this issue, this work aims at the evaluation of the performance of different machine learning classifiers on a benchmark emotion dataset. The experimental results show the performance of different machine learning classifiers in terms of different evaluation metrics like precision, recall ad f-measure. Finally, a classifier with the best performance is recommended for the emotion classification.

In this study, the focus is on the drop test simulation of an MR (Magnetorheological) damper-based main landing gear (MRMLG), aiming to explore multi-degree-of-freedom (DOF) dynamic models during aircraft landing. Three different 6-DOF dynamic models are proposed in this work and their drop performances are compared with results achieved one of commercial softwares. The proposed models include a nonlinear aircraft model (NLAM), a linearized approximated aircraft model (LAAM) linearizing from the nonlinear equations of motion in NLAM, and a fully approximated aircraft model (FAAM) which linearizes the MRMLG's strut force model. In order to evaluate drop performance of the aircraft landing gear system with MR dampers, a 7-DOF aircraft model incorporating the nonlinear MRMLG is formulated using RecurDyn. The principal comparative param-eters are the coefficient of determination (R2) for system response of each model with Re-curDyn model and root mean square error (RMSE) which is the ensembles of CG dis-placement data for each model. In addition, the ensemble of time series data is created for diverse drop scenarios, providing valuable insights into the performance of the proposed drop test models of the aircraft landing gear system featuring MR dampers.

Almost all single-family detached house in Canada consume huge electricity for space heating and domestic hot water (DHW) purposes. There are many possibilities to design an energy-efficient house. A solar water heating system can be used for domestic water and space heating. Water temperature can be kept constant always by connecting a heat pump or oil burner because solar energy is intermittent. Proper and optimized solar photovoltaic and collector design, tank design, heat pump selection, house insulation, total demand calculation in each section are essential. Energy-Efficient house design has been proposed with water heating and space heating system and compared with the existing system, solar PV based systems, and solar collector based system. The tracking and non-tracking based solar thermal collector based and the solar photovoltaic based system has been compared in this paper and investigate the suitable one for practically applicable and acceptable by the people. Simulation has been done by using the PolySun software. It found that by implementing the proposed PV based system with tracking is highly suitable considering lower cost, high output power, flexibility, easy installation.

This paper investigated reliability modeling for systems subject to dependent competing risks considering that the variation of failure threshold is not considered in most studies on competing failure reliability. Firstly, the variation of degradation quantity under shocks was analyzed, and the variation of threshold was considered on this basis. Secondly, the cumulative degradation under the influence of the random shock process was analyzed. The attractive property of copula is symmetry. Then, A linear Wiener process model is applied to model performance degradation failure, and a multi-performance-degradation correlated-competition model based on a Copula function is constructed, which considers the correlated competition between multiperformance degradation failures. Lastly, the micromotor system is used to analyze the applicability of the proposed model for bivariate instances. demonstrating the rationality and effectiveness of the proposed model.

The stinging nettle caterpillar, Darna pallivitta (Lepidoptera: Limacodidae) is a serious invasive pest of agricultural products and a health hazard on the Hawaiian Islands first discovered in 2001. Nursery workers and homeowners have been stung by the caterpillars while handling their plants, especially rhapis palms (Rhapis sp.). Throughout its invaded range, it causes widespread damage including the many cultivated and native palm species grown in Hawaii. Of medical importance are the stinging spines of the larva, which cause dermatitis on contact with the skin. Horticulture and nursery products impacted by the limacodid pest are estimated at $84.3 million (2018 value). An eradication attempt with pesticides and lure traps was made but proved unsuccessful and the moth population continued to spread to major Hawaiian Islands (Hawaii, Kauai, Maui, Oahu). The introduction of specific biological control agents from the native region was thought to be the long-term solution for this invasive pest. Initial exploration in Indonesia and Thailand resulted in the introduction of a pupal ectoparasitoid, Nesolynx sp. (Hymenoptera: Eulophidae: Tetrastichinae), that was not specific. The oriental wasp, Aroplectrus dimerus Lin (Hymenoptera: Eulophidae: Eulophinae), idiobiont gregarious ectoparasitoid of the stinging nettle caterpillar, was introduced from Taiwan in 2004 for host specificity studies and biocontrol in Hawaii. Host range testing showed the parasitoid attacked only limacodid species and it was approved for field release in 2010. The parasitoid identity, host specificity under containment facility conditions, reproductive performance, colonization on the major infested sites were assessed. A total of 13379 parasitoids were colonized on162 release sites on four Hawaiian Islands. Evaluations were conducted using field surveys of larvae, pupal counts, and male lure traps. Field parasitism was thoroughly investigated on Oahu Island averaging 18.9 ± 5.6 % of 3923 collected larvae during 2010 – 2023. The numbers of male moths caught/trap/month were significantly reduced on Oahu Island (P

Developing high performance HVAC system using natural refrigerants including carbon dioxide (CO₂) has been important in respect of environmental preservation and associated technologies. Thus studies to optimize the HVAC (heating ventilation air conditioner) system using natural refrigerants through clarifying the cycle performance characteristics are necessary. The CO₂ heat pump system using air and water sources was consisted to examine its performance characteristics, and by varying conditions of several factors that affect or characterize the system performance like the amount of refrigerant charge, EEV (electronic expansion valve) opening, and internal heat exchanger under cooling mode. The performance characteristics of CO₂ heat pump system were tested by using an air enthalpy calorimeter. In the case of the CO₂ heat pump system without internal heat exchanger, the opening of #3 EEV and #4 EEV was 60% and refrigerant charge amount was 5,600g. However, in the case of that with internal heat exchanger, the best performance was obtained when the opening of #2 EEV is 20%. From the present studies, it was observed that the performance variation and operational characteristics of the CO₂ heat pump system were affected by design factors like refrigerant charge amount, EEV opening, and internal heat exchanger and thereby, the configuration on an optimal operation conditions of the system was enabled.

Big data has revolutionised science and technology leading to the transformation of our societies. High Performance Computing (HPC) provides the necessary computational power for big data analysis using artificial intelligence and methods. Traditionally HPC and big data had focused on different problem domains and had grown into two different ecosystems. Efforts have been underway for the last few years on bringing the best of both paradigms into HPC and big converged architectures. Designing HPC and big data converged systems is a hard task requiring careful placement of data, analytics, and other computational tasks such that the desired performance is achieved with the least amount of resources. Energy efficiency has become the biggest hurdle in the realisation of HPC, big data, and converged systems capable of delivering exascale and beyond performance. Data locality is a key parameter of HPDA system design as moving even a byte costs heavily both in time and energy with an increase in the size of the system. Performance in terms of time and energy are the most important factors for users, particularly energy, due to it being the major hurdle in high performance system design and the increasing focus on green energy systems due to environmental sustainability. Data locality is a broad term that encapsulates different aspects including bringing computations to data, minimizing data movement by efficient exploitation of cache hierarchies, reducing intra- and inter-node communications, locality-aware process and thread mapping, and in-situ and in-transit data analysis. This paper provides an extensive review of the cutting-edge on data locality in HPC, big data, and converged systems. We review the literature on data locality in HPC, big data, and converged environments and discuss challenges, opportunities, and future directions. Subsequently, using the knowledge gained from this extensive review, we propose a system architecture for future HPC and big data converged systems. To the best of our knowledge, there is no such review on data locality in converged HPC and big data systems.

We have suggested earlier a new sustainable method for permafrost thermal stabilization that combines passive screening of solar radiation and precipitation with active solar-powered cooling of the near-surface soil layer thus preventing heat penetration in depth. Feasibility of this method has been shown by calculations, but needed experimental proof. In this article, we are presenting the results of soil temperature measurements obtained at the experimental implementation of this method outside of the permafrost area which actually meant higher thermal loads than in Polar Regions. We have shown that near-surface soil layer is kept frozen during the whole summer, even at air temperatures exceeding +30°C. Therefore, the method has been experimentally proven to be capable of sustaining soil frozen even in more extreme conditions than expected in permafrost areas. In addition to usual building and structure thermal stabilization, the method could be used to prevent the development of thermokarst, gas emission craters, and landslides; greenhouse gases, chemical, and biological pollution from the upper thawing layers at least in the area of human activities; protection against coastal erosion; and permafrost restoration after wildfires. Using commercially widely available components, the technology can be scaled up for virtually any size objects.

Banking sector is generally taken out of sample while the sustainability performance, and the financial performance are compared with each other. The core aim of this study is to analyze the effect of the declarations made in the cope of sustainability reports on the financial performance in the banking sector. Seven banks were included in the study which were placed at least one time in BIST Sustainability Index in between 2010-2017 years. Environment, human resources, product liability and community involvement were determined as sustainability criteria and return on assets, return on equity and net interest margin were determined as financial performance criteria. Non-Parametric Statistic Tests and Panel Data Analysis were used for analysis and types, and the sizes of banks were selected as dummy variables. As a result, it is found that the declarations of sustainability reports have a significant effect only on return on assets and have no significant effect on return on equity and net interest margin. And also, when we analyzed the relationship of sustainability criteria and return on assets, we found that the declarations about environment and human resources have negative effects on return on assets.

Currently, most middleware application developers have two choices when designing or implementing API services: They can either stick with REST or explore the emerging GraphQL technology. Although REST is widely considered the standard method for API development, GraphQL is believed to overcome the main drawbacks of REST, especially data fetching issues. Yet, doubts remain as there are no experimental studies with convincing results to evaluate the performance of the two services. In this paper, we propose a research methodology to evaluate the performance of REST and GraphQL API services, which includes two main contributions. The first contribution is that the performance evaluation of the two services is conducted in the real operation of a massive and intensively accessible management information system. The second contribution is the fair and independent performance evaluation results obtained for both API services. The performance evaluation was studied using basic measures of QoS, including response time, throughput, CPU load, and memory usage. The results show that REST is still faster in response time and throughput, while GraphQL is very efficient in resource utilization, i.e., CPU load and memory utilization. Therefore, GraphQL is the right choice when data requirements change frequently and resource utilization is the most important consideration. REST is used when some data is frequently accessed called by multiple requests.

The Internet of Healthcare Things (IoHT) is an essential IoT domain that encompasses the necessary capabilities to transform the current healthcare system. IoHT generates, transfers, manages, stores, and processes highly confidential medical data and sensitive personal information. Thus, IoHT is a critical application from a security perspective and is most favorably targeted by attackers. Several security-breaching attempts can be carried out due to the vulnerabilities of the IoHT that put classified data at constant risk. Henceforth, this work aims to inspect the performance of 6LoWPAN-RPL-based `Patient-Centric IoHT’ in the presence of malicious intruders conducting blackhole, rank, and DoDAG attacks in both normal and emergency operational modes of the mentioned resource-constraint network. PC-IoHT is simulated on the Cooja simulator and Contiki-OS for each attack with two and four intruders (out of 10 motes) for both operation modes. Several performance evaluation parameters are used to assess the overall performance of the considered PC-IoHT. The attacks’ impact on PC-IoHT is analyzed by comparing blackhole, rank, and DoDAG attacks with the no-attack scenario.

Partial shading on solar photovoltaic (PV) arrays is a prevalent problem in photovoltaic systems that impair the performance of PV modules and is responsible for reduced power output as compared to that in standard irradiance conditions thereby resulting in the appearance of multiple maximas on panel output power characteristics. These maxims contribute to mismatch power losses among PV modules. The mismatch losses depend on shading characteristics together with different interconnected configuration schemes of PV modules. The research presents a comparative analysis of partial shading effects on a 4 x4 PV array system connected in series(S), parallel (P), serries-parallel (SP),total-cross-tied (TCT),central-cross-tied(CCT),bridge-linked(BL),bridge-linked total cross-tied (BLTCT) ,honey-comb(HC), honey-comb total-cross-tied (HCTCT) and ladder (LD) configurations using MATLAB/Simulink. The PV module SPR-X20-250-BLK was used for modeling and simulation analysis. Each module is comprised of 72 number of PV cells and a combination of 16 PV modules was employed for the contextual analysis. Accurate mathematical modeling for the HCTCT configuration under partial shading conditions (PSCs) is provided for the first time and is verified from the simulation. The different configuration schemes were investigated under short-narrow,short-wide,long-narrow,long-wide, diagonal, entire row distribution, and entire column distribution partial shading condition patterns with mathematical implementation and simulation of passing clouds. The performance of array configurations is compared in terms of maximum power generated ), mismatch power loss (∆), relative power loss ) and the fill factor (FF). It was inferred that on average, TCT configuration yielded maximum power generation under all shading patterns among all PV modules interconnection configurations with minimum mismatch power losses followed by hybrid and conventional PV array configurations respectively.

Promoting the use of solar energy resources has always faced the challenges of instability and supply-demand mismatch. The key to solving these issues is to efficiently store and utilize solar energy resources using high-performance heat storage devices. This study designed a high-performance shell-and-tube phase change thermal storage device and established a numerical model using ANSYS software to summarize the device's dynamic melting law. To verify the accuracy of the numerical simulation, a performance testing platform for the phase change thermal storage device was built to investigate the impact of factors such as inlet water temperature, inlet water flow rate, type of heat storage, and initial temperature of the device, and to reveal the change law of the device's performance. The results show that the inlet water temperature has the most significant impact on the device's heat storage and release performance. When the device's heat storage or release is used for heating, changing the inlet water flow rate has a weak and limited effect on the device's performance. However, when the device's heat release is used to provide domestic hot water, increasing the makeup water temperature and reducing the inlet water flow rate can significantly improve the device's effective heat release. Furthermore, based on the experimental validation of the model's correctness, this study further simulated and studied the impact of different factors on the device's heat storage process to optimize its structural design and provide technical references for the device's actual operation and installation. The results show that the placement of fins has a negligible effect on the performance of the heat storage device while reducing the fin spacing and increasing the fin thickness can significantly improve the melting efficiency of the phase change material (PCM). Additionally, the heat storage characteristics of the device are significantly better in the vertical installation mode than in the horizontal installation mode. This study provides theoretical guidance and technical references for the design and use of phase change thermal storage devices.

Lithium batteries and an increasing focus on CO₂ reduction have become an integral part of daily life and business for many people. Boron and boron compounds have been widely studied together in the history and development of lithium batteries. With a broad examination of battery components and systems but a boron-centric approach to raw materials, this review seeks to summarize past and recent studies on the following: which boron compounds are studied in lithium battery, in which parts of lithium batteries, what improvements are offered for battery performance, and what improvement mechanisms can be explained. The uniqueness of boron and its extensive application beyond batteries contextualizes the interesting similarity with studies on batteries. The paper predominantly focuses on lithium-ion batteries (LIBs) but also mentions other lithium batteries. At the end, the article aims to predict prospective trends for future studies that may lead to the successful and extensive use of boron compounds on a commercial scale.

This study assessed the relationship between body posture displacements and cardiopulmonary function test (CPET) and skill related physical fitness tests. One hundred male (60%) and female collegiate athletes (22.2 ± 4yrs) with a normal body mass index (BMI up to 24.9) were assessed via the PostureScreen Mobile app to quantify postural displacements as head, thorax and pelvis rotations and translations. CPET and physical performance tests including the agility T-test, the vertical jump test, the stork static balance test (SSBT) and the dynamic Y-balance test (YBT) were performed. Spearman correlation (r) and p-values are reported. Postural parameters were found to have moderate-to-high associations with CPET and the agility test, moderate correlations with the vertical jump test and the SSBT (head and pelvic postures only), and weak correlations with the YBT. As postural parameters were more asymmetric, both CPET and performance skills scores were worse. For examples: 1) a medium positive correlation was found between cranio-vertebral angle (CVA) and vertical jump test (r = 0.54; p-value &lt; 0.001) and SSBT (r = 0.57; p-value &lt; 0.001), while a strong negative correlation was found between CVA and agility test (r = -0.86; p-value &lt; 0.001). 2) A strong positive correlation was found between CVA and oxygen uptake efficiency slope, load watts VO2 at VT, VO2 / kg, load watts at respiratory compensation point (RCP), (r = 0.65 and r = 0.71; p &lt; 0.001). Conversely, a significant negative correlation was found between CVA and VE / VO2 at VT (r = -0.61; p &lt; 0.001). Postural rotations and translations of the head, thorax and pelvis were statistically correlated with physical performance skills and CPET in young collegiate athletes. There were moderate-to-high associations with cardiopulmonary functions and agility tests, moderate correlations with the vertical jump test, and weak correlations with the YBT. Postural alignment may be important for optimal physical performance and optimal cardiopulmonary function. Further research is necessary to elucidate reasons for these correlations as found in our sample of young and healthy athletes.

Early weaning of piglets caused excessive concentration of free radicals, which would oxidize and damage the intestinal tract of piglets, resulting in dyspepsia, low growth, diarrhea, microbiota disorders and intestinal infections. This research studied on effect of different levels of taurine in diets on intestinal oxidative damage in early weaned piglets. A total of 48 weaned piglets (6.71 ± 0.73 kg) of 28-day-old crossbred "Duroc × Landrace × Yorkshire" were assigned to 4 groups with 12 replicates per group and 1 pig per replicate: piglets were fed a basal diet with 0.0% (CON), 0.2% taurine (L-Tau), 0.3% taurine (M-Tau), or 0.4% taurine (H-Tau). The animal experiment lasted for 30 days. With the increase of dietary taurine dosage, the activity of antioxidant enzymes including superoxide dismutase（SOD）,glutathione peroxidase（GPX）,catalase（CAT） and peroxidase（POD） were up-regulated (Linear, P &lt; 0.05), the mRNA abundance of antioxidant enzymes including SOD1, SOD2, GPX1 and heme oxygenase-1（HO-1）were up-regulated (P &lt; 0.05), glutathione (GSH) concentrations was up-regulated (Linear, P &lt; 0.05) , nitric oxide (NO), malondialdehyde (MDA) and oxidized glutathione (GSSG) concentrations were down-regulated (Linear, P &lt; 0.05);The villus height (VH) and villus height/ crypt depth (VH/CD) of jejunum and ileum were increased (Linear, P &lt; 0.05); The expression of tight junction proteins including zonula occludens protein 1(ZO-1), occludin (OCLN) and closure protein 1(CLDN-1) in the jejunum mucosa were up-regulated (Linear, P &lt; 0.05), the mRNA abundance of ZO-1, OCLN and CLDN-1 were up-regulated (P &lt; 0.05),and the D-lactose (D-LA) content in blood was down-regulated (Linear, P &lt; 0.05); the colonization abundance of Firmicutes was increased (Linear, P &lt; 0.05), while Proteobacteria and Spirochaetota was decreased (Linear, P &lt; 0.05); The diarrhea index decreased (Linear, P &lt; 0.05), while the feed conversion rate increased (Linear, P &lt; 0.05). Collectively, supplementation of 0.3% and 0.4% taurine in feed can significantly alleviate intestinal oxidative damage by enhancing antioxidant capacity of piglets, and improve feed utilization of piglets after repairing intestinal damage.

Long-term storage may reduce the nutritional quality of brown rice, so the present study was aimed to evaluate the nutritive values and application in pig diets. In Exp.1, 18 Landrace × Yorkshire (L × Y) barrows with initial body weight (IBW) of 25.48 ± 3.21 kg were randomly assigned to three treatments, which included corn diet, one-year stored brown rice (BR1) diet and six-year stored brown rice (BR6) diet, to determine the digestible energy (DE) and metabolisable energy (ME) value of stored brown rice. In Exp. 2, 24 barrows (L × Y; IBW: 22.16 ± 2.42 kg) fixed with ileal T-cannula were randomly allotted to four dietary treatments, including corn diet, two stored brown rice diets and nitrogen-free diet, to evaluate the amino acid (AA) digestibility of stored brown rice. In Exp. 3 and 4, 108 crossbred weaned piglets (L × Y; IBW: 9.16 ± 0.89 kg) and 90 crossbred growing pigs (L × Y; IBW: 48.28 ± 3.51 kg) were allotted to 3 treatment diets, including control diet and two stored brown rice diets, respectively, to investigate the application of stored brown rice in weaned piglet and growing-finishing pig diets. Results showed that: 1) The DE and ME of corn and stored brown rice showed no significant differences (P > 0.05), while the apparent ileal digestibility (AID) of arginine, histidine, aspartic acid, and the standardized ileal digestibility (SID) of arginine and histidine were higher in stored brown rice compared to corn (P < 0.05). 2) Compared with the control diet, the stored brown rice diets showed no significant effects on growth performance, nutrient apparent total tract digestibility (ATTD) and serum biochemical indices (P > 0.05), but decreased digestive enzymes activities in duodenum, jejunum and ileum of piglets (P < 0.05). 3) Compared with the control diet, the stored brown rice diets showed no significant effects on growth performance, carcass traits, meat quality, fatty acids profiles in the longissimus dorsi muscle of growing-finishing pigs (P > 0.05). In conclusion, the brown rice stored for 6 years under good conditions has no obvious changes in available energy and nutrient values. Although it may reduce digestive enzyme activity in small intestine of the piglets, the stored brown rice showed no obvious adverse effect on growth performance and meat quality, and can be effectively used in pig diet.

Aquaculture is an important source of food for the growing global population. To meet the increasing demand for fish, intensive aquaculture methods are commonly used. However, these methods can lead to stress and disease in fish, which can result in significant economic losses. Gamma-aminobutyric acid (GABA) is a non-protein amino acid that is found in the brain and central nervous system of animals as inhibitory neurotransmitter. It has been shown to have a variety of physiological functions, including stress reduction and immune enhancement. This study investigated the effects of dietary supplementation of GABA on growth, serum biochemistry, innate immunity and disease resistance in juvenile olive flounder (Paralichthys olivaceus) challenged with Edwardsiella tarda under high stocking density. A control diet and three experimental diets were prepared, with 150 mg/kg (GABA150), 200 mg/kg (GABA200), and 250 mg/kg (GABA250) of GABA added to each diet, respectively. The actual GABA content of the experimental diets was analyzed and found to be 63.9 mg/kg (CON), 231.3 mg/kg (GABA150), 291.6 mg/kg (GABA200), and 323.9 mg/kg (GABA250). Each experimental diet was fed to olive flounder with an initial weight of 12.75 g ± 0.3 g in 40 L tanks at two stocking densities: normal density (20 fish/tank) and high density (40 fish/tank). The experiment was conducted in triplicate for each diet and stocking density. The water temperature was maintained at 17.5 ± 1℃ and the salinity at 33 ± 1 ppt. After 8 weeks of feeding trial, growth, feed utilization, whole-body proximate composition, blood analysis, non-specific immune response, and challenge test were performed. There were no significant difference in weight gain and specific growth rate among the GABA concentrations and density × GABA concentration interaction groups. However, the low-density groups showed significantly higher values than the high-density groups (P &lt; 0.05). There was no significant difference in feed efficiency and protein efficiency ratio among all groups. Moreover, there was no significant difference in the whole-body general composition analysis (P &gt; 0.05). In the hematological analysis, there was no significant difference in cortisol in terms of diet and density × GABA concentration interaction, but the high-density experimental group showed a significantly higher value. Blood GABA significantly increased in proportion to the addition amount regardless of the density group (P&lt;0.05). Superoxide dismutase activity in the non-specific immune response showed that the GABA-added experimental group had a significantly higher value than the control group, but there was no significant effect of the density densities or density × GABA concentration interaction (P&lt;0.05). Myeloperoxidase activities in fish fed the GABA200 and GABA250 diets showed significantly higher values, and a density × GABA concentration interaction effect was observed (P&lt;0.05). Lysozyme activity was significantly higher in the GABA150 group than in the CON, GABA200, and GABA250 groups (P &lt; 0.05). After 15 days of challenge test by intraperitoneal injection of Edwardsiella tarda, the cumulative survival rates of the GABA150, GABA200, and GABA250 groups were significantly higher than that of the CON group (P &lt; 0.05). The results suggested that the optimal dietary GABA level for juvenile olive flounder culture is 150 mg/kg, regardless of rearing density, to enhance growth, immune function and disease resistance.

The Ames/quantitative structure-activity relationship (QSAR) International Challenge Projects held during 2014–2017 and 2020–2022, evaluated the performance of various predictive models. Despite the significant insights gained, the rules allowing participants to select prediction targets introduced ambiguity in model performance evaluation. This reanalysis identified the highest-performing prediction model, assuming a 100% coverage rate (COV) for all prediction target compounds and an estimated performance variation due to changes in COV. All models from both projects were evaluated using balance accuracy (BA), Matthews correlation coefficient (MCC), F1 Score (F1), and the first principal component (PC1). After normalizing the COV, a correlation analysis with these indicators was conducted, and the evaluation index for all prediction models in terms of the COV was estimated. In total, 109 models, the highest estimated BA (76.9) at 100% COV was MMI-VOTE1, reported by Meiji Pharmaceutical University (MPU). The best models for MCC, F1, and PC1 were all MMI-STK1, also reported by MPU. All models reported by MPU ranked in the top four. MMI-STK1 was estimated to have F1 scores of 59.2, 61.5, and 63.1 at COV levels of 90%, 60%, and 30%, respectively. These findings highlight the current state and potential of the Ames prediction technology.

There is a paucity of data on the progression of track cycling sprinters, and the evolution of training and performance over a training cycle. Following prior research showing relationships between sprint cycling power and endurance cycling power, we compared these relations over a 3-month period. Our hypothesis is large improvements in power would come from training either for sprint power or sprint capacity, and this would be reflected in the data. A total of publicly available 25 datasets. These data were plotted against the line of best fit for 30-s and 2-min power to assess if training towards the line led to better 30-s power. We observe the best performances came from riders who start below the 30-s vs 2-min power line of best fit, with greater capacity and ability to ride fast over a sprint series, and progressing towards focusing on specific power in the final block leading into a competition. These results support the hypothesis of combined capacity and power training based on rider-specific relationship to the line of best fit between these measures versus a strictly maximal power training focus.

In this paper, it is defined that how the IPOs are affected by the underwriter reputation. What will happen to IPOs who are backed by reputed underwriter and who is not? And evaluate the IPOs short-run and long-run performance. Also try to explain the relationship between IPOs and underwriter. Also tried to compare some of the international return and Pakistani returns. Also determine the relation of the investor to the underwriter. There is a set of investors who have there own relationship with the underwriters how they will affect on the IPOs in the market.

In the construction sector, the integration of biobased materials has emerged as a pivotal aspect of EU policies, aimed at promoting sustainable practices throughout the value chain to mitigate resource consumption and carbon emissions. This paper explores the development and validation activities of a bio-based façade system within the Basajaun H2020 project, focusing on enhancing the utilization of biobased components within building envelopes to replace conventional solutions with eco-friendly alternatives. This paper reports the methodologies employed to detect requirements and outline the testing protocols undertaken to validate the façade system design devised within the project focusing on the original façade components as the bio composite profile. Vision and opaque façade modules are prototyped and tested following curtain wall standards standard for performance and acoustic assessments, to showcase the efficacy of the developed solution. The conducted tests demonstrate the feasibility of integrating bio-based components into building envelopes, aligning with project expectations, and prevailing standards for curtain wall façade solutions. Notably, the designed façade system meets technical conditions and project objectives. Nevertheless, the research underscores the need for further refinements to facilitate solution industrialization and explore broader market applicability. Future efforts will focus on addressing these improvements and assessing the scalability of the solution.

Solar heating technology is a promising solution to promote China to achieve the “3060 double carbon” target as soon as possible. And seasonal thermal storage (STS) can effectively solve the mismatch problem of solar heating systems between the supply and demand of thermal energy. Due to the instability of solar radiation resources and heat demand, it is necessary to analyze the dynamic response characteristics of the system. Yet, related studies are still scarce. In this study, a solar heating system with a solar tower receiver and STS was introduced in north China. The dynamic performance of the system is analyzed with a dynamic simulated method in a typical day or typical operation modes, and the switch mechanism between multiple operation modes is also revealed. The impact of different heating strategies on system performance was analyzed. Results showed that the solar fraction of the system reached 89.4% in the third year, which was 3.6% higher than the first year. The quality-quantity heating operation strategies can be effective ways to improve the discharge efficiency of STS and the system performance without any heat pump. The electricity consumption of the pump on the heating side could be significantly reduced by 44.6% compared with the quality control.

In recent years, with the increasing prominence of environmental and social issues, investors have been paying more attention to the ESG performance of enterprises, highlighting the importance of ESG factors in the financial field. This study is based on the theories of banking business models, stakeholder theory, risk management theory, and ESG investment theory. It uses the financial data and ESG scores of Chinese listed banks to deeply analyze the ESG factors and explore their impact on the liquidity risk of commercial banks. The research found that (1) good ESG performance can reduce the liquidity risk commercial banks face by improving bank value and financial performance. (2) ESG factors can also enhance the liquidity management level of commercial banks through standardization and sustainable business principles, thereby reducing the occurrence and impact of liquidity risk. Therefore, it is necessary to reduce the liquidity risk of banks and promote the sustainable development of commercial banks from four aspects: ESG performance and management, bank value, financial performance, and policy regulation.

The purpose of this study is to examine the match-related performance (scores and penalties) of the athletes in the Junior EJC (European Judo Championship) and U23 EJC categories before and immediately after the Covid-19 quarantine, according to gender and weight category groups. Our sample was based on the junior and U23, male and females, 2019-2020 Junior European Judo Championships and 2019-2020 U23 European Judo Championships. A total of 1431 matches in these tournaments were analyzed: male (n=812) and female (n=619). The main findings of this study showed that most matches in both the male and female categories resulted in ippon (2019-2020 average: 64,35% for Junior male, 70,55% for U23 male and 69,3% for Junior female, 64,4% for U23 female). No significant differences (p &gt; 0.05) were observed between gender and age groups concerning the match scores. In the formation phase of the technique, considerations of high- and low-intensity actions, and analysis of the speed of athletes during matches in official competitions can help to better understand the dynamics of the variability of movements in judo matches. In addition, suggestions are presented to be applied to athletes in different age categories who are on the way to become Olympic athletes.

China is facing the development requirements of the dual carbon goal and the construction needs of resilient cities. Currently, high-strength composite structural systems are a feasible solution, but their research and application in the construction field are insufficient, especially for the combination forms of concrete above C100 and steel above Q550. In response to this issue, this paper proposes a new high-performance structural system, namely the composite frame - high-strength steel plate wall core tube resilient structure system, which includes high-strength steel plate (Q550) - ultra-high strength concrete (C100) shear walls, replaceable energy dissipation coupling beams, and composite frames. Taking a 200 meter building as an example, this paper designs and establishes calculation models for a conventional reinforced concrete frame-core tube structure and a high-performance structure based on PKPM software, and establishes elastoplastic analysis models for both based on SAUSAGE software, and then conducts dynamic elastoplastic time history analysis and seismic resilience assessment of structures under design basis earthquakes (DBEs), maximum considered earthquake (MCEs) and extremely rare earthquakes (EREs). Research has shown that compared to conventional structures, new high-performance structures can effectively reduce the size of shear walls, reduce the self-weight of the structure, and enhance the space for building use; The story drift ratio has higher redundancy than specification limits, lower plastic damage and overall stiffness degradation of the structure, and better seismic performance; The seismic resilience has significantly improved, especially in the case of casualties, which can better ensure the safety of people's lives and property.

In this age of global warming, academics and policymakers are increasingly concerned about firm environmental sustainability success. Therefore, this study aims to investigate whether Environmental, Social and Governance (ESG) performance impacts sustainability performance through the mediating effect of firm innovation. To this end, Structural Equation Modeling (SEM) was deployed to analyze data collected from the employees of manufacturing industries in an emerging economy like Bangladesh. The results revealed that ESG performance significantly enhances the innovation and sustainability performance of manufacturing industries, indicating that the higher the ESG performance of a firm, the greater its innovation and sustainability performance. Furthermore, the results confirmed that firm innovation performance fully mediates the relationship between ESG initiatives and sustainability performance. The findings of this study provide policymakers and industry authorities with valuable insight into the role of ESG and innovation performance in improving sustainability performance. Specifically, the study sheds knowledge on how firm ESG initiatives and innovation performance impact sustainability performance in the manufacturing sector of an emerging economy like Bangladesh.

Ice and snow on roads in winter endanger traffic safety. The existing methods of snow and ice removal have various drawbacks, which need further research. Aiming at solving limitations about high labor intensity, low efficiency, serious environmental pollution of traditional snow and ice removal methods, the anti-icing coating technology of high-voltage conductors is used for reference, and in view of the characteristics of asphalt pavement deicing, an ice-suppressing material that can effectively reduce the adhesion between snow, ice and pavement is successfully developed. As there is no perfect evaluation index and method for ice-suppressing materials at present, this paper further evaluates the performance of ice-suppressing materials from the aspects of deicing performance, durability, adhesion and the impact of ice-suppressing materials on pavement performance. The test results show that the ice-suppressing material can effectively reduce the adhesion between the ice layer and the specimen, making it easier to remove. The ice-suppression material has good slow-release performance, and the specimens still have good deicing performance after 7 cycles of tests.

In the current study, we assessed the effects of conventional and Ultra High Dose Rate (UHDR) irradiation on behavioral and cognitive performance one month following exposure and assessed whether these effects were associated with alterations in the number of immune cells in the hippocampus using flow cytometry. Conventional- and UHDR-irradiated mice showed impaired novel object recognition. During fear learning, conventional- and UHDR-irradiated mice moved less during the inter-stimulus-interval (ISI) and UHDR-irradiated mice also moved less during the baseline period (prior to the first tone). In irradiated mice, reduced activity levels were also seen in the home cage; conventional- and UHDR-irradiated mice moved less during the light period and UHDR-irradiated mice moved less during the dark period. Following behavioral and cognitive testing, infiltrating immune cells in the hippocampus were analyzed by flow cytometry. The percent Ly6G+ CD45+ cells in the hippocampus was lower in conventional- and UHDR-irradiated than sham-irradiated mice, suggesting that neutrophils might be particularly sensitive to radiation. The percent of Ly6G+ CD45+ cells in the hippocampus was positively correlated with the time spent exploring the novel object in the object recognition test, suggesting that the reduced percent Ly6G+ CD45+ cells in the hippocampus might mediate some of the detrimental radiation-induced cognitive effects.

The Inefficient water use, varying and low productivity in Kenya public irrigation schemes is a major concern. It is therefore necessary to periodically monitor and evaluate the performance of public irrigation schemes. The performance of public irrigation in western Kenya was assessed by combining benchmarking methodology and principal component analysis. The aim was to quantify and rank the performance of pumped public irrigation schemes in Kenya. Eleven benchmarking indicators were computed for the period from 2012 to 2016 and compared to global benchmark values. The indicators used fall under agricultural productivity, water supply and financial performance categories. The computed agricultural productivity was 36%–51% in Ahero, 23%–42% in West Kano and 26%–50% Bunyala irrigation scheme. Water supply performance in Ahero, West Kano and Bunyala irrigation schemes varied from 24% to 58%, 3% to 49% and 19% to 43% respectively. Financial performance varied from 46% to 54% in Ahero, 25% to 32% in West Kano and 54%–56% in Bunyala irrigation scheme. An average overall performance efficiency of 46%, 39% and 31% was obtained in Ahero, Bunyala and West Kano irrigation schemes respectively. The performance of the irrigation schemes is very poor and measures on improving performance are needed.

Recent media reports commented about a possible antidiabetics’ misuse issue related to molecules promoted as a weight-loss treatment in non-obese people. We evaluated here available pharmacovigilance misuse/abuse signals related to semaglutide, a glucagon-like peptide-1 (GLP-1) analogue, in comparison to other GLP-1 receptor agonists (albiglutide; dulaglutide; exenatide; liraglutide; lixisenatide; tirzepatide) and the phentermine-topiramate combination. To that aim, we analysed the Food and Drug Administration-FDA Adverse Events Reporting System (FAERS) dataset, performing a descriptive analysis of adverse event reports (AER) and calculating related pharmacovigilance measures, including the reporting odds ratio (ROR) and the proportional reporting ratio (PRR). During January 2018-December 2022, a total of 31,542 AER involving the selected molecules were submitted to FAERS; most involved dulaglutide (n=11,858; 37.6%) and semaglutide (n=8,249; 26.1%). In comparing semaglutide vs the remaining nolecules, the AER ‘drug abuse’, ‘drug withdrawal syndrome’, ‘prescription drug used without a prescription’ and ‘intentional product use issue’ respective PRR values were 4.05, 4.05, 3.60 and 1.80 (all<0.01). The same comparisons of semaglutide vs the phentermine-topiramate combination were not associated with any significant differences. To the best of our knowledge, this is the first study documenting the misusing/abusing potential of semaglutide in comparison with other GLP1 analogues and the phentermine-topiramate combination. Current findings will need to be confirmed by further empirical investigations to fully understand the safety profile of those molecules.

Recent media reports commented about a possible antidiabetics’ misuse issue related to molecules promoted as a weight-loss treatment in non-obese people. We here evaluated available pharmacovigilance misuse/abuse signals related to semaglutide, a glucagon-like peptide-1 (GLP-1) analogue, in comparison to other GLP-1 receptor agonists (albiglutide; dulaglutide; exenatide; liraglutide; lixisenatide; tirzepatide) and the phentermine-topiramate combination. To that aim, we analysed the Food and Drug Administration-FDA Adverse Events Reporting System (FAERS) dataset, performing a descriptive analysis of adverse event reports (AER) and calculating related pharmacovigilance measures, including the reporting odds ratio (ROR) and the proportional reporting ratio (PRR). During January 2018-December 2022, a total of 31,542 AER involving the selected molecules were submitted to FAERS; most involved dulaglutide (n=11,858; 37.6%) and semaglutide (n=8,249; 26.1%). In comparing semaglutide vs the remaining antidiabetics, the AER ‘drug abuse’, ‘drug withdrawal syndrome’, ‘prescription drug used without a prescription’ and ‘intentional product use issue’ respective PRR values were 4.05, 4.05, 3.60 and 1.80 (all<0.01). The same comparisons of semaglutide vs the phentermine-topiramate combination were not associated with any significant differences. To our best, this is the first study documenting the misusing/abusing potential of semaglutide in comparison with other novel antidiabetics and the phentermine-topiramate combination. Current findings will need to be confirmed by further empirical investigations to fully understand the safety profile of those molecules.

This study aimed to analyze the effect of a flow training program based on mindfulness applied to young and adult elite handball athletes. A quantitative, quasi-experimental, descriptive data analysis approach was carried out. The sample included 105 athletes (51 female and 54 male). The athletes were divided into two groups: i) experimental (n = 53) and ii) control (n = 52). The results of the repeated ANOVA indicated that the experimental group achieved significant improvements compared to the control group in decision making (n2p=.086), mental well-being (n2p=.045), dispositional flow state (n2p=.103), non-judgment (n2p=.040), refocusing (n2p=.052) and mindful trait in daily life (n2p=.058). In the linear regression test, the factor non-judgment was identified as a predictor of decision making (F(103)=7.99, p=.006) and the predictor for the mental well-being were dispositional flow state (F(102)=29.2, p

Covid-19 is a disease caused by SARS-CoV-2, which has spread worldwide since the beginning of 2020. Several pharmaceutical and non-pharmaceutical strategies were proposed to contain the virus dissemination, including vaccination and lockdowns. One of the consequences of the pandemic was the denial or delay of access to convenient health care services, but also potentially the increase of adverse events within those services, like the number of hospital infections. Therefore, the main question here is: What happened to the performance and sustainability of hospitals? The main goal of this work was to test if the Portuguese public hospitals' performance has been affected by the SARS-CoV-2 pandemic. We used the Benefit-of-Doubt method integrated with the Malmquist Index to analyze the performance evolution over time. Then, we employed a multiple regression model to test whether some pandemic-related variables could explain the performance results. We considered a database of 40 Portuguese public hospitals evaluated from January 2017 to May 2022. The period 2017 to 2019 corresponds to the baseline (pre-pandemic), against which the remaining period will be compared (during the pandemic). We also considered fourteen variables characterizing hospital quality, divided into three main performance definitions (efficiency and productivity; access; safety and care appropriateness). As potential explanatory variables, we consider seven dimensions, including vaccination rate and the need for intensive care for Covid-19 infected people. Results suggest that Covid-19 pandemic features help explain the drop on access after 2020, but not the evolution of safety and appropriateness of care, which surpris-ingly increased the whole time.

The paper deals with the design of a systematic procedure for implementing strategy changes into internal business processes for a project-oriented production type of organization. In the first part of the contribution, a summary of the theoretical starting points for the field of strategic management and change management is presented. In the second part, the contribution deals with the analysis of the current situation in the area of the impact of the change of strategy on the management of business processes. In the last part, the proposal of the procedure for implementing strategy changes into internal business processes and the verification results are presented. The proposed procedure includes steps where the selection and verification of key performance indicators at individual levels of management plus the quantification of the impact of the change in strategy on the processes takes place. The management can thus monitor and evaluate the chosen processes in accordance with the fulfilment of the chosen strategy of the company. The last chapter presents the verification of the proposal for the systematic introduction of changes into the processes.

This paper presents preliminary operational performance results of a pilot grid-connected photovoltaic (PV) system designed and installed on the rooftop of the Ministry of Petroleum, Energy and Mining headquarter in Nouakchott (latitude of 18.1°N and the longitude of 16.0°W), Mauritania. The aim is for the government to demonstrate the relevance of using solar energy and to encourage the uptake of solar PV technology for commercial and residential building applications in Mauritania.. In this study, the grid-connected PV system has a peak power of 48 kW and the performance monitoring was carried out during one year, with a system that allow to measure DC power, inverter and system conversion efficiency, energy generated by the PV arrays, solar radiation in the inclination plane of panels, ambient temperature and module temperature. During this period, the PV plant was found to supply 65,668 kWh to the grid. The final yield ranged from 3.91 to 5.09 kWh/kWp/day. The performance ratio was found to vary from 69.69% to 89.35% and the annual capacity factor was found to be 19%. Finally, performance parameters were compared with other PV plants installed in the same region of Northern Africa. The outcome of this work is deemed important in assisting accurate PV system design and decision-making.

This study investigated the impact of sustainability reporting on financial performance, with a focus on companies in the Turkish food, beverage and tobacco and textile, wearing apparel and leather sectors. The sustainability reports of 48 companies listed on the Istanbul Stock Exchange for 2022 were studied, and the quality of sustainability practices was determined by using a general index (Sustainability Reporting Disclosure Quality Index (SRDQI)) and three partial indices (Environmental Disclosure Quality Index, Social Disclosure Quality Index, and Corporate Governance Disclosure Quality Index (CGDQI)). To analyze the relationships between financial performance and sustainability practices two types of regression models were developed, based on which eight models were directly examined. The results indicate the complete absence of a statistically significant impact of SRDQI on all financial performance measures used. Among the partial indices, only CGDQI has a significant positive effect on the Assets Turnover Ratio. An analysis of the influence of control variables shows a multidirectional dependence of individual financial performance measures on the size of companies, their age, industry affiliation, as well as on the structure of capital used. Finally, this study provides directions for improving the institutional environment of sustainability reporting for Turkish companies.

Asphalt binder is a temperature sensitive material, whose performance is greatly affected by the climate change of the environment. Improper selection of asphalt will cause a lot of damage and affect the durability of the road. The establishment of asphalt pavement performance zoning in Xinjiang, a vast area with great temperature difference, will provide reference for the selection of asphalt suitability, the refinement of pavement design and the sustainable development of road engineering. In this study, 11 years of temperature data in Xinjiang region were collected and analyzed, and 98% reliability of pavement design temperature was used to draw a performance grading map of asphalt pavement in Xinjiang region based on ArcGIS platform. Finally, Xinjiang region was divided into 9 performance zones. At the same time, the performance grade (PG) of five kinds of asphalt binders in Karamay were explored. The result shows that there is little difference in continuous PG span between different matrix asphalt binders, the lower penetration grade, the better high temperature performance, the worse low temperature performance. After adding SBS modifier, the continuous PG span can be higher than the matrix asphalt in 20 ℃. All these provide the basis for reasonable selection of asphalt binders in different areas of Xinjiang.

Performance appraisal is a fundamental indicator in public accountability to achieve the good governance principles. Hence, this study aims to analyze the performance measurement that can improve performance on government agencies in South Sulawesi, Indonesia. The study was conducted in qualitative approach. The research found that non-integrated models of performance measurement in South Sulawesi are inefficient and ineffective. Inefficiency happens because it uses time and cost resources separately, while being ineffective is because both models focuses on each goal instead on performance goals and the process is not supported by the actual management.

Clustering is an important task in data mining that has become more challenging due to the ever-increasing size of available datasets. To cope with these big data scenarios, a high-performance clustering approach is required. Sparse grid clustering is a density-based clustering method that uses a sparse grid density estimation as its central building block. The underlying density estimation approach enables the detection of clusters with non-convex shapes and without a predetermined number of clusters. In this work, we introduce a new distributed and performance-portable variant of the sparse grid clustering algorithm that is suited for big data settings. Our compute kernels were implemented in OpenCL to enable portability across a wide range of architectures. For distributed environments, we added a manager-worker scheme that was implemented using MPI. In experiments on two supercomputers, Piz Daint and Hazel Hen, with up to 100 million data points in a 10-dimensional dataset, we show the performance and scalability of our approach. The dataset with 100 million data points was clustered in 1198s using 128 nodes of Piz Daint. This translates to an overall performance of 352TFLOPS. On the node-level, we provide results for two GPUs, Nvidia's Tesla P100 and the AMD FirePro W8100, and one processor-based platform that uses Intel Xeon E5-2680v3 processors. In these experiments, we achieved between 43% and 66% of the peak performance across all compute kernels and devices, demonstrating the performance portability of our approach.

The importance of this study may be defined by using the smart techniques to earned value indicators of residential buildings projects in Republic of Iraq, only one development intelligent forecasting model was presented to predict Schedule Performance Index (SPI), Cost Performance Index (CPI), and To Complete Cost Performance Indicator (TCPI) are defined as the dependent. The approach is principally influenced by the determining numerous factors which effect on the earned value management, that involves Iraqi historical data. In addition, six independent variables (F1: BAC, Budget at Completion., F2: AC, Actual Cost., F3, A%, Actual Percentage., F4: EV, Earned Value. F5: P%, Planning Percentage., and F6: PV, Planning Value) were arbitrarily designated and satisfactorily described for per construction project. It was found that ANN has the capability to envisage the dust storm with a great accuracy. The correlation coefficient (R) has been 90.00%, and typical accuracy percentage has been 89.00%.

Background: Manoeuvres esbarrada and volta sobre patas are fundamental movements in equestrian activities, yet their kinematics remain largely unexplored. Objectives: This observational study aimed to kinematically describe the movements of esbarrada and volta sobre patas in Criollo breed horses. Methods: Kinematic analysis was conducted on 31 Criollo horses executing esbarrada and volta sobre patas manoeuvres. Results: The esbarrada maneuver covered a distance of 4.28 ± 0.99m in 1.15 ± 0.11s at a velocity of 3.77 ± 0.55m/s. Angular kinematic variables revealed specific joint angles during the maneuver. In volta sobre patas, significant differences were found in spin duration and thoracic limb suspension between the first and second spins. Conclusions: Volta sobre patas demonstrated prolonged spinning duration and increased thoracic limb suspension in the second spin. Additionally, static conformation did not correlate with limb protraction angles during esbarrada.

The main purpose of the study was to study the effects of a specific rowing ergometer training program on the athletic performance of young adolescents (n=56; 11.73 ± 1.4 years old) com-pared to a workout based on general strength training. Eight-week training program was im-plemented, with four sessions per week and two-hours per session. Sample was divided in two groups: a control group (CG) that performed circuit training with exercises aimed at building general strength and an experimental group (EG) who focused on specifically training on a rowing ergometer (rowing machine). The data obtained in a rowing meter test over the compe-tition distance were analyzed to obtain the average power attained (W) at the beginning of the training, at the middle (4 weeks), at the end of the training (8 weeks) and one year after the ex-perimentation. The results show that, although both forms of training improve the average W obtained in both categories, the EG subjects (+29.94W) obtained better averages in all phases of the study compared to the CG (+5.88W). Furthermore, this increase was greater in male rowers (+ 34.06W) than in female rowers (+24.54W). These results reveal that a specific rower rowing ergometer training program has a significant effect than a general strength program and these effects can even be observed a year after the intervention.

The medical sector is of the utmost importance in every country for well-known reasons such as their economic development, national security, quality of life, and so on. Many researchers were dedicated to this topic, however, in Romania there are limited studies on this subject. One reason is that most of the businesses in this sector are individual enterprises or small family businesses. In our research paper we deploy several analysis methods to see the financial sustainability of companies operating in the medical industry. By analyzing a sample of 23931 companies and we have concluded that their performance has increase in the peak of the pandemic and that the financial stability is high. Our results are in line with other similar studies that were conducted in other regions.

Non-compliant (NC) structures are often encountered in building construction in developing countries. This is a condition whereby erected buildings do not follow regulatory standards, especially in the provision of reinforcements. Therefore, under an earthquake load, the structures do not have sufficient resistance against such load. The structural elements of the building, which often have NC conditions, are the beam-column joints because they do not contain adequate shear reinforcements due to installation difficulty. This study aims to determine the structural performance of the reinforced concrete (RC) frame, which has a reinforcement deficiency in the beam-column joints. Numerical simulation was conducted on the Kakaletsis structure model by modifying the reinforcement details at the joints to represent the NC conditions. The non-linear modeling and analysis of the structural model were carried out using ATENA software. The analysis showed that the reduction in shear reinforcements in the NC model joint caused a decrease in load-carrying capacity by about 26.04%. A shift was also observed in the collapse pattern, i.e., from the beam to the end of the column, causing global failure and reducing the undamaged but increasing more severely damaged condition. This showed that the NC structure, due to the non-conformance of reinforcement, significantly reduced the structure's performance.

This study offers a concise summary of the research that has been done on alternative methods of HRM. A survey of 47 articles on the topic of creative human resource management uncovered three primary schools of thinking. At its core, innovation in HRM entails nothing more than that. One such topic worthy of investigation is the way human resource management approaches new situations. Third, research on inventiveness in the business world has given rise to the concept of "innovative HRM." Each of these three approaches, as well as the theoretical underpinnings of each, will be covered in this article. The note wraps up with a discussion of the significance of the findings for next research as well as clinical practice.

We are in the era where various processes need to be online. However, data from digital learning platforms are still underutilised in higher education, yet, they contain student learning patterns, whose awareness would contribute to educational development. This limits development of adaptive teaching and learning mechanisms. In this paper, a model for data exploitation to dynamically study students progress is proposed. Variables to determine current students progress are defined and are used to group students into different clusters. K-means clustering is performed on real data consisting of students from a South African tertiary institution. Cluster migration is analysed and the corresponding learning patterns are revealed.

The authors propose in this study to evaluate financial performance applications for stock prices of the Indonesian Stock Exchange in manufacturing companies. The method of research used here is a quantitative descriptive method. In that statement, Indonesian Stock Exchange manufacturing companies between 2016 and 2018 are the population use in this research, using the sampling technique Purpose Sampling. This research uses secondary data from 2016 to 2018, the financial reports of Indonesian Stock Exchange manufacturing companies. The Indonesian stock exchange web site has been provided with all data sources at https://www.idx.co.id, and searching for www.google.id. Our analysis shows that book value prices and the net profit margin affect stock prices. The value of financial performance at the Indonesian Stock Bourses manufacturing companies' cost amounts to 64.5 percent, while other factors not listed in this study account for 35.4 percent.

Most of the municipalities in the Gulf region are facing performance related issues in their municipal solid waste management (MSWM) systems. They lack to possess a deliberate inter-municipality benchmarking processes. Instead of identifying the performance gaps for their key components (e.g., personnel productivity, operational reliability, etc.) and adopt proactive measures, the municipalities primarily rely on an efficient emergency response. A novel hierarchical modeling framework, based on deductive reasoning, is developed for performance assessment of MSWM systems. Fuzzy rule based modeling using Simulink-MATLAB was used for performance inferencing at different levels, i.e., component, sub-components, etc. The model is capable of handling the inherent uncertainties due to limited data and imprecise knowledge base. The model’s outcomes can exclusively assist the managers working at different levels of organizational hierarchy for effective decision-making. Performance of the key component, assists the senior management to assess the overall compliance level of performance objectives. Subsequently, operation management can hone in the sub-components to acquire useful information for intra-municipality performance management. While, individual indicators are useful for inter-municipality benchmarking. The model has been implemented on two municipalities operating in Qassim Region, Saudi Arabia. The results demonstrate the model’s pragmatism for continuous performance improvement of MSWM systems in the country and elsewhere.

The study aimed to investigate the impact of incorporating deep learning strategies in mathematics instruction on students' problem-solving abilities, critical thinking skills, academic achievement, and mathematical skills development. The study population consisted of 280 students, with a sample size of 162 participants. Employing a purely quantitative approach, data collection utilized questionnaires and achievement tests as instruments. Data analysis involved simple linear regression, descriptive analysis, and Pearson correlation. The results of the study revealed that there was no significant enhancement observed in students' problem-solving abilities and critical thinking skills when deep learning strategies were incorporated into mathematics instruction. Additionally, students' attitudes towards deep learning activities in mathematics showed no effect on their academic achievement. Furthermore, students' engagement levels in deep learning activities did not impact their development of mathematical skills. Lastly, the frequency of deep learning activities in the mathematics classroom did not show a significant relationship with students' academic performance. These findings suggest that the implementation of deep learning strategies in mathematics instruction did not yield notable improvements in the specified areas based on the study outcomes.

French academies almost all implement reactivity drills and small-sided games (SSG) the day preceding a match (MD-1). The present study aimed to determine the physical impact of different training durations on MD-1 on the subsequent matchday performance (MD). Eleven elite U19 academy soccer players con-ducted three typical training sessions lasting 45min (TS45), 60min (TS60), and 75min (TS75) on MD-1. Dur-ing TS60, warm-up, reactivity and SSG were 10, 15, and 24min, respectively, plus coaches' feedback or wa-ter breaks. Durations decreased and increased by 25% for TS45 and TS75, respectively. Tests were con-ducted on MD-4 (CONTROL) and MD before the match (TEST). Tests consisted of a counter movement jump (CMJ), 20m sprint, Illinois agility test (IAT), and Hooper questionnaire. CONTROL values were simi-lar over the three experimental conditions. TEST on MD revealed greater CMJ for TS45 (42.7 ± 5.1cm) compared to TS60 (40.5 ± 5.5cm, p=0.032) and TS75 (40.9 ± 5.7cm, p=0.037). 20m time was lower for TS45 (3.07 ± 0.10s, p<0.001) and TS60 (3.13 ± 0.10s, p=0.017) compared to TS75 (3.20 ± 0.10s). IAT time was lower on TS45 (14.82 ± 0.49s) compared to TS60 (15.43 ± 0.29s, p<0.001) and TS75 (15.24 ± 0.33s, p=0.006). Further-more, the Hooper index was lower at TEST for TS45 (7.64 ± 1.50) compared to TS60 (11.00 ± 3.49, p=0.014) and TS75 (9.73 ± 2.41, p=0.045) indicating a better readiness level. We concluded that as training session duration increases, performance decreases on MD. A 45min training session including reactivity and SSG exercises is therefore recommended on MD-1.

UHPC is a type of cement-based composite used in new construction and/or rehabilitation of existing buildings to extend service life. It is a novel composite material that can serve as an alternative to concrete construction in hostile climates. Following decades of study and production, a diverse variety of commercial UHPC compositions are now available globally to meet the rising number of applicants and demand for high-quality building materials. Although UHPC offers major benefits over normal concrete, its utilization is restricted due to restrictive design rules and exorbitant costs. As a result, a thorough examination of the durability properties of UHPC is required to give important information for material testing requirements and processes, as well as to broaden its practical uses. This report is aimed at increasing basic understanding of UHPC and supporting more UHPC research and applications.

The COVID-19 pandemic caused significant training disruptions during the 2020-21 season due to lockdowns, quarantines, and strict adherence to pandemic protocols. The main purpose of this study was to determine how pandemic training restrictions affected training volume and performance in one collegiate swim team. Cumulative training volume data, across a 28-week season, were compared between a pandemic (2020-2021) versus non-pandemic (2019-2020) season. Swimmers were categorized into three groups (Sprinters, Mid-Distance, and Long-Distance) based on training group. Performance times in 25 swimmers who competed in Regional Championships, during both the non-pandemic and pandemic year, were compared via 1-way ANOVA. 26 male and 22 female swimmers commenced the 2020-21 (pandemic) season, with 23% of swimmers voluntarily opting out. Three COVID-19 cases were confirmed (2%) by the medical staff with no long-term effects. Significant reductions in average swim volume were verified in Sprinters (32,867±10,135 vs.14,800±7,995yards;p<0.001), Mid-Distance (26,457±10,692 vs.17,054±9.923yards;p<0.001), and Long-Distance (37,600±14,430 vs.22,254±14,418yards;p<0.001) swimmers (non-pandemic vs. pandemic season, respectively). In the Regional performance analyses, the Sprinters swam faster (n=8;-0.5±0.6secs), while Mid-Distance (n=10;0.17±2.1secs) and Long-Distance (n=7;6.0±4.9secs) swimmers swam slower (F=11.76;p=0.0003;r²=0.52). Thus, the pandemic caused significant reductions in swim training volume, with Sprinters performing better and Long-Distance swimmers performing worse at Regional Championships.

An investigation was carried out to study the effects of television and internet on academic performance of senior secondary schools students in Rigachukun Inspectorate of Kaduna state. A well structured and designed questionnaire was adopted in eliciting information from the respondents. The respondents were sampled from schools within Kaduna state. The information obtained showed that the percentage of senior secondary school students who made use of internet for academic purpose was as much as those who could not operate a computer or even browse the internet. Good number of students applied internet mostly through phones and computer with internet access in solving their assignment. A larger percentage of students devoted their time to watching non-educative programs on television, even though it was discovered that some of them also watch educative programs. Positive impacts of television and internet are however obscuring and not glaring. Investigation carried out revealed that students in senior secondary schools need to be sensitized and oriented on how they can derive the best from internet and television. Schools should be encouraged in using television and internet as an instrument of learning and teaching.

Leadership performance by village leaders is essential to promote sustainable life among rural communities, especially fisheries community who living along coastal villages. Otherwise, previous studies found that performance issues among village’s leaders remain as serious problems, and need to find the best solution. This study was conducted to profile the job performance among village leaders based on demographic factors such as educational level, age and experiences as village leader. The data of this cross-sectional survey were collected by questionnaires on 300 respondents consist of members of village organization through stratified sampling’s technique, while the data was analysed by SPSS using items of mean, standard deviation, independent-sample t-test and anova. The finding shown that there were differences in job performance among village leaders on educational level, age and experiences. Interestingly, the finding told the best on job performance among village leaders are (i) the age between 41 to 50 years old; (iii) the experience between 11 to 20 years; and (iii) the higher educational level the higher job performance among them. This result can be using by government or any responsible parties to improve job performance among village leaders, especially for recruitment selection and for in-service training.

Background.Nurse gives professional nursing service to patients according to competence owned. Based on these services in the end of every year, nurses are given incentives for medical services as financial incentive. Purpose. To analyze the impact of competence training and incentives medical services’ distribution upon the achievement of nurse’s performances in General Hospital of W. Z. Johannes Kupang. Matterial and method. Observational survey research with cross sectional design. Population. Nurses in General Hospital of W. Z. Johannes Kupang. Technique. Total sampling technique with number of samples 183 respondents. Inclusive criteria of samples are willing to be interviewed, nurse’s status, permanent offices without limitation from particular working unit or poly in hospital. Independent variable: (1) competence training; (2) Incentives for medical services. Dependent variable; Nurse’s performance achievement. Variables are measured by using Lickert scale. Information are recorded through questionnaire. Analyzes using linier regression. Result. There are impacts of competence training (α=.000;ß=.489)and distribution of incentives for medical services(α=.012; ß=.152)upon nurse’s performances achievement in General Hospital of Prof.W. Z. Johannes Kupang. Conclusion.The training of nursing service status that could increase competences among nurses with affair incentives for medical services’ distribution simultaneously end up in the increasing of nurse’s performances achievement in a hospital

The study examines how the South African construction industry can nurture an entrepreneur and a large successful entrepreneurial construction company, even though the founder had no formal education and the company was founded during the Apartheid era. The question of whether entrepreneurs are born or are made is based on the age-old question of nurture and nature. The paper presents the narratives of a successful entrepreneur Mr. Sam Lubbe. The narratives presented are collected through a case study research approach. The data collected suggests that although Sam does not have any formal education, he succeeded based on nurturing given to him when he had the opportunity to work for a large South African construction company, his innate characteristics of self-confidence, task-result orientation, originality, future direction, and a unique business model which also helped him access international construction work opportunities.