The study investigates the effects of immobilizing the fungi on the straw's performance as an oil sorbent. The buoyancy of the straw with fungi was found to be unaffected by the immobilization process. Even when sorbed with oil, the straw floated on the water’s surface throughout the 14-day test period. The sorption kinetics of the oil appeared similar in straw with and without immobilized fungi, regardless of beaker shaking. However, the fraction of non-extractable oil was higher in the straw with fungi and shaking compared to the straw without shaking. This observation suggests the potential initiation of oil mining. Based on these results, it is suggested that instead of leaving the straw with fungi and oil in the water, removing it may be beneficial and allow for oil degradation and straw decomposition on land.

“Minas Frescal” cheese is a high moisture product, subject to the proliferation of several microorganisms. Essential oils are natural antimicrobial alternatives that can increase the quality of dairy products. This study aimed to analyze the antimicrobial action of oregano (Origanum vulgare) and rosemary (Rosmarinus officinalis) essential oils against Escherichia coli and Staphylococcus aureus. An antimicrobial test by diffusion and microdilution was performed to calculate the MIC (Minimum Inhibitory Concentration) and MBC (Minimum Bactericidal Concentration). The behavior of E. coli in “Minas Frescal” cheese added with oregano oil was evaluated. The MIC of oregano oil was 0.25% against E. coli and 1% against S. aureus. For rosemary essential oil, the MIC was 8% of against E. coli. There was no activity of rosemary oil against S. aureus. The MBC observed for oregano essential oil was 1% and 0.25% respectively for S. aureus and E. coli. Bacterial analysis during cheese storage with E. coli indicated inhibition of microorganisms by oregano essential oil at a concentration of 0.25%. No alterations were observed regards to physical-chemical attributes. The use of essential oil as an antimicrobial agent has potential for industrial use, and type of microorganism, oil and sensory reflexes in the product must be observed.

This study aimed to improve sensitivity of ferrous particle sensors used in various mechanical systems such as wind power gearboxes to detect abnormalities by measuring the amount of ferrous wear particles generated by metal-to-metal contact. Existing sensors collect ferrous particles using a permanent magnet. However, its ability to detect abnormalities is limited because it only measures amounts of ferrous particles collected on the top of the sensor. To overcome this limitation, this study evaluated sensibility of an existing sensor using a multi-physics analysis method and improved it by changing the core shape inside the sensor. The detection ability of the improved sensor was analytically shown to be better than the existing sensor. This study highlights the use of analytical methods and multi-physics analysis for developing a ferrous particle sensor and presents a method to compare sensibility analytically. Results of the improved sensor are expected to enhance the ability to detect abnormalities in the lubrication system where ferrous wear particles are generated. This study will contribute to the development of more effective ferrous particle sensors, which can potentially improve the performance and reliability of mechanical systems.

Rapeseed (Brassica napus L.) is one of the most oil crop, and its commercial value is contingent upon its agronomic characteristics and oil quality. In this study, 73,226 single nucleotide polymorphisms (SNPs) across 95 rapeseed mutant lines derived from gamma rays and their original cultivar (‘Tamra’) obtained from genotyping-by-sequencing (GBS) was investigated gene ontology (GO) analysis and genome-wide association study (GWAS). GWAS was conducted on agronomic (plant height, ear length, thousand seed weight and seed yield) and oil (fatty acid and crude fat) traits. GO analysis showed that many genes displaying SNPs were involved in cellular processes, intracellular anatomical structures and organic cyclic compound binding. A total of 149 significant SNPs were associated with the agronomic traits (76 SNPs) and oil traits (73 SNPs). Bna.A05p02350D (SFGH) and Bna.C02p22490D (MDN1) were selected as novel candid genes for thousand seed weight. In addition, Bna.C03p14350D (EXO70) and Bna.A09p05630D (PI4Kα1) were selected as novel candidate genes for the erucic acid and crude fat content, respectively. These findings could facilitate the identification of optimal genotypes for breeding new cultivars, and association studies represent an economically efficient tool for mutant screening and the selection of elite rapeseed-breeding lines.

Hot air frying is a new method of frying food, where the use of a small amount of oil is optional but recommended. The objective of this review was to know the state of the art of hot air frying technology, focusing on trends, and thus obtain new ideas for future work in this area of food. In conclusion, the availability of advanced devices will increase the demand for hot air fryers as demonstrated by the trend generating a great economic and social impact. This new technology not only provides health benefits, but also has environmental advantages. In addition, work focusing on food (i.e. tortilla chips, plantain chips, eggs and meats) is recommended, since there are not enough studies on the subject. Currently, research is being conducted on home fryers, so the use of fryers and their impact at the industrial level is a developing area that will require further research.

Altitude is an important ecological factor that significantly affects essential oil content, yield and composition. The Origanum majorana, belonging to Origanum genus of Lamiaceae family, is a species with antibacterial and antiviral effects, widely used as a spice and also used in folk medicine for treatment of diseases such as asthma, indigestion, headache and rheumatism. In this study, conducted to examine the effects of altitude on essential oil content and composition of origanum majorana, plant samples were collected from the southern region of Turkey at the beginning of flowering period from seven different altitudes (700-800 m, 800-900 m, 900-1000 m, 1000-1100 m, 1100-1200 m, 1200-1300 m and 1300-1400 m) at 100 m intervals. The highest percentage of essential oil (6.50%) obtained by hydro-distillation was determined at 700-800 m altitudes. The GC-MS analyses revealed that low altitude affected some essential oil components positively. The linalool ratio, which is the major component of the essential oil of Origanum majorana species, was the highest at 700-800 m (79.84%) altitudes. Borneol (0.97%), linalool oxide (1.28%), trans-linalool oxide (1.47%), caryophyllene (2.78%), a- humulene (0.21%), germacrene-D (0.31%) and bicyclogermacrene (2.64%) components yielded high values at 800-900 m altitudes. Thymol (6.28%) and a-terpineol (1.04%), which have an important place in the essential oil composition, increased at 1100-1200 m altitudes; a- terpinene (0.17%), cis-sabinene hydrate (0.82%), terpinene-4-ol (0.55%) and carvacrol (21.50%) increased at 1300-1400 m altitudes.

We investigate the determinants of U.S. bilateral imports of olive oil and their dynamics from shocks in foreign supplies and changes in U.S. olive oil demand, using an augmented gravity framework that leads to an equilibrium of bilateral trade flows from olive oil exporters to the U.S. market. The empirical specification is applied at the disaggregated HS-6 level in a panel dataset, and three estimation techniques (truncated OLS, PPML, Heckman), for which the latter two account for zero trade flows, the extensive margin of trade and the potential censored distribution of exports with zero trade flows. We run Reset and HPC tests to qualify our results. On the supply side, exporters’ capacity to exports, multilateral trade resistance, and immigrants’ networks into the US are strong determinants of the bilateral trade flows for both aggregate olive oil exports and for virgin olive oil exports, On the consumer side, U.S. GDP, the import unit value, and immigrant network effects are robust determinants of bilateral flows as well for aggregate and virgin olive oil trade flows. Migrants’ stock, exporters’ GDP and population, and total exports revenues increase the probability of an exporter entering the U.S. market. We could not find robust evidence of consumer behavior being influenced by popular press measures of the emergence of Mediterranean diet and olive oil, or measures of cultural globalization of U.S. consumers.

Many countries are raising questions on the intentions behind Saudi reforms. The low oil prices in 2008-09 were the awakening call for Saudis, and later in 2014, it became the reason to look for the economy that is less dependent on oil. The article studies the initiated social reforms and social impact of foreign cultural activities. It scrutinizes the Saudi social fabric under the social exchange theory and looks for the positive and negative effects of cultural exchanges. The paper also considers the COVID-19 situation in KSA as it has broken the chain of cultural events planned all over the country to promote tourism and improve the image of KSA.

The resource curse indicates that economic growth performs poorly in countries with significant natural resources. Nevertheless, certain countries rich in energy managed to protect their resource riches in the long run. It is necessary to enforce effective policies in resource-rich countries to fully leverage the advantages which can come from the abundance of natural resources. This study aimed to evaluate how oil-rich countries would avoid resource flows by successful fiscal and management policies. By taking the guidance of Norway and implementing fiscal policy focused on tax rules on its oil management, it is proposed that oil-exporting countries benefit significantly. The framework attempts to mitigate this resource curse and utilise oil revenues in the interest of the country.

Background: COVID-19, a member of corona virus family is spreading its tentacles across the world due to lack of drugs at present. Associated with its infection are cough, fever and respiratory problems causes more than 15% mortality worldwide. It is caused by a positive, single stranded RNA virus from the enveloped coronaviruse family. However, the main viral proteinase (Mpro/3CLpro) has recently been regarded as a suitable target for drug design against SARS infection due to its vital role in polyproteins processing necessary for coronavirus reproduction.Objectives: The present in silico study was designed to evaluate the effect of Eucalyptol (1,8 cineole), a essential oil component from eucalyptus oil, on Mpro by docking study.Methods: In the present study, molecular docking studies were conducted by using 1-click dock and swiss dock tools. Protein interaction mode was calculated by Protein Interactions Calculator.Results: The calculated parameters such as RMSD, binding energy, and binding site similarity indicated effective binding of eucalyptol to COVID-19 proteinase. Active site prediction further validated the role of active site residues in ligand binding. PIC results indicated that, Mpro/eucalyptol complexes forms hydrophobic interactions, hydrogen bond interactions and strong ionic interactions.Conclusions: Therefore, eucalyptol may represent potential treatment potential to act as COVID-19 Mpro inhibitor. However, further research is necessary to investigate their potential medicinal use.

This study was conducted to develop a PID control algorithm considering viscosity for the planting depth control system of a rice transplanter using various hydraulic oils at different temperatures and to evaluate the performance of the control algorithm, and compare the performance of the PID control algorithm without considering viscosity and considering viscosity. In this study, the simulation model of the planting depth control system and a PID control algorithm were developed based on the power flow of the rice transplanter (ERP60DS). The primary PID coefficients were determined using the Ziegler–Nichols (Z–N) second method. Routh’s stability criteria were applied to optimize the coefficients. The pole and double zero points of the PID controller were also applied to minimize the sustained oscillations of the responses. The performance of the PID control algorithm was evaluated for three ISO (The International Organization for Standardization) standard viscosity grade (VG) hydraulic oils (VG 32, 46, and 68). The results show that the control algorithm considering viscosity is able to control the pressure of the proportional valve, which is associated with the actuator displacement for various types of hydraulic oils. It was noticed that the maximum pressure was 15.405 bars at 0, 20, 40, 60, 80, and 100 ℃ for all of the hydraulic oils. The settling time and steady-state errors were 0.45 s at 100 ℃ for VG 32, and 0% for all of the conditions. The maximum overshoots were found to be 17.50% at 100 ℃ for VG 32. On the other hand, the PID control algorithm without considering viscosity could not control the planting depth, because the response was slow and did not satisfy the boundary conditions. The PID control algorithm considering viscosity could sufficiently compensate for the nonlinearity of the hydraulic system and was able to perform for any of temperature-dependent viscosity of the hydraulic oils. In addition, the rice transplanter requires a faster response for accurately controlling and maintaining the planting depth. Planting depth is highly associated with actuator displacement. Finally, this control algorithm considering viscosity could be helpful in minimizing the tilting of the seedlings planted using the rice transplanter. Ultimately, it would improve the transplanter performance.

This paper presents a review of the electrical heating method for heavy oil recovery based on past, current, and future prospects of electrical heating. Heavy oil is one of the potential crude oil used as a link to reduce the crisis of light oil used today. The obstacle of heavy oil is a high viscosity and density in which thermal injection is a method for heavy oil recovery, but it results in economic and environmental issues. Electrical heating is one of the thermal methods by transferring heat into the reservoir. The basic process of electrical heating is to increase the mobility of the oil. Because the temperature rises, it can reduce oil viscosity and makes it easier for heavy oil to flow. The past and current developments have been carried out to fill up the gap of electrical heating projects. The future prospects must meet energy efficiency, and the excessive heat will damage formation that must be tackled in the future prospect. the works adopt several electrical heating projects and applications in the world where the works give a brief future prospect of electrical heating.

This work is aimed at promoting a healthier means of livelihood by investigating insignificant areas of pollution. In this work, soy candles produced from soybeans were proven as healthier alternatives to paraffin candles. Soxhlet extraction method was used with hexane as solvent. The extracted oil were then solidified. The wax was moulded into candle and tests were carried out to prove its claims as a safer alternative to paraffin wax. The results supported this claims that soy candles is more economical and produced lesser soot than the paraffin candles.

Purpose: The purpose of this paper is to explore and analyse the dynamic relationship between remittances inflows of Egyptians working abroad and asymmetric oil price shocks. Design: This study uses a vector autoregressive (VAR) model to explain the impulse response functions (IRFs) and the forecast error variance decomposition (FEVD). The rationale behind using these tools is its ability to examine the dynamic effects of our variables of interest. Findings: The impulse response functions confirmed that remittance inflows have various responses to asymmetric oil price shocks. For instance, inflowing remittances increase in response to positive oil price shocks, while it decreases in response to negative oil price shocks. Also, the results indicate that the responses are significant in the short and medium-run and insignificant in the long run. The magnitude of these responses reaches its peak or trough in the third year. Further, the variance decomposition reveals that oil price decreases are more influential than oil price increases. Originality: This means that remittances inflows in Egypt are pro-cyclical with oil price shocks. That explained by the fact that more than one-half of those remittances sent from GCC countries where real economic growth is very pro-cyclical with the oil prices. This empirical assessment will help policymakers to determine the behaviour of remittances and highlights the impact of different kinds of oil prices shocks on remittances. Unlike the little existing literature, this study is the first study applied the VAR model using a novel dataset spanning 1960-2016.

Abstract: In this study the essential oils of Salvia officinalis growing in Sudan, were obtained by hydrodistillation and analyzed by Gas chromatography mass spectrometer, forty tow compounds were identified. The essential oil composition of S.officinalis found that it had many important compounds. The detected main compounds were oxygenated monoterpenes followed monohydrocarbone, squiterpenes and other compounds. The main essential oil constituents were α-terpineol (33.07%), camphor (11.57%), α-pinene (8.96%) camphene (5.09%) β-cymen (5.40 %) caryphyllene (3.76%) β-myrcene (3.65%) β-menth1-en-b-ol (3.45%) bomeol (3.38%) β-pinene (2.74%) Epiglobulol (2.59%) 1,8 Cineol (2.24%) and trans-β- terpinyl butanone(2.00% ).

Polyurethane (PU) foam adhesives were prepared from castor oil as a polyol with isocyanate poly (4,4′-methylene diphenyl isocyanate) (PMDI) using a solvent-free process. The NCO/OH molar ratio used for the preparation of PU foams was 1.5. Water, organosiloxane and dibutyltin dilaurate were blowing agent, surfactant and catalyst, respectively. Effects of the ratio of blowing agent and catalyst were adjusted to optimize the properties. The results show that 4 wt% of castor oil of catalyst and blowing agent minimizes water absorption and maximizes volume expansion in the PU foams. FT-IR analysis shows that urethane bond was formed by hydroxyl group of castor oil and –NCO group of isocyanate PMDI. More blowing agent and catalyst could improve the volume expansion ratio and reduce water retention of PU foams. It was found that Moso bamboo charcoal (Phyllostachys pubescens) or/and China fir wood particle (Cunninghamia lanceolate) composites with setting densities of 500 and 600 kg/m³ can be prepared from optimized castor oil-based PU foam adhesive at 100 °C for 5 min under a pressure of 1.5 MPa. Increasing the amount of bamboo charcoal decreases the equilibrium moisture content, water absorption and internal bonding strength of the composite. Notably, bamboo charcoal composite exhibits excellent dimensional stability. The optimized density and bamboo charcoal percentages of the composite were 500 kg/m³ and 50 to 100%. The castor oil-based PU composites containing bamboo charcoal fulfilled the CNS 2215 standards for particleboard. This dimensionally stable, low-density bamboo charcoal composite has high potential to replace current indoor building materials.

Babchi (Psoralea corylifolia) oil is an important essential oil used in several traditional medicines to cure various disorders. This phytotherapeutic agent possesses number of pharmacological activities including antibacterial, antifungal, antioxidant, anti-inflammatory, immunomodulatory and antitumor. However, volatile nature, poor stability and solubility of babchi oil (BO) restrict its pharmaceutical applications. Hence, the aim of the present work was to encapsulate this oil in β-cyclodextrin nanosponges (NS) in order to overcome above limitations. To fabricate nanosponges, β-cyclodextrin was crosslinked with diphenyl carbonate in different molar ratios viz.1:2, 1:4, 1:6, 1:8 and 1:10. The blank nanosponges were loaded with babchi oil using freeze-drying method. Particle size of the babchi oil loaded nanosponges was found to lie between 200-500 nm, with low polydispersity index. Further, zeta potential, Fourier transform infrared spectroscopy, X-ray diffraction, thermal analysis and electron microscopy were carried out for characterization of babchi oil nanosponges. Results obtained from spectral analysis ascertained the formation of inclusion complexes. Additionally, solubilisation efficiency of the babchi oil was checked in distilled water and found enhanced by 4.95 times with optimized β-cyclodextrin nanosponges. The cytotoxicity study was carried out by MTT assay using HaCaT cell lines. A significant improvement in photostability of essential oil was also observed by inclusion in nanosponges. Lastly, the optimized formulation was tested for antibacterial activity using Staphylococcus aureus, Pseudomonas aeruginosa and Escherichia coli. Hence, encapsulation of BO in nanosponges resulted in efficacious carrier system in terms of solubility, photostability as well as safety of this oil along with handling benefits.

The patterns of food consumption in general and those of meat, in particular, are constantly changing. These changes are due not only to socio-economic and cultural trends that affect the whole society but also to the specific lifestyles of consumer groups. Due to the importance of consumer lifestyle, the objectives of this study were i) to identify the profiles of lamb meat consumers according to their orientation toward convenience, as defined by their eating and cooking habits; ii) to characterize these profiles according to their socio-economic characteristics and their preferences regarding the intrinsic and extrinsic quality signals of lamb meat; and iii) to analyze the willingness to pay for lamb confit. In this study, four types of consumers have been differentiated according to their lifestyles related to lamb consumption. These groups, due to their characteristics, could be called "Gourmet", "Disinterested", "Conservative" and "Basic". The Gourmet group has characteristics that make it especially interesting to market a product such as lamb confit; however, this group is unaware of this product. Therefore, a possible strategy to expand the commercialization of light lamb and the confit product would be guided marketing to this niche market.

Oil revenues and external debt might have stimulated economic growth in the oil exporting countries via investment in capital projects. The paper estimated economic growth on oil revenues and external debt after controlling public investment and population growth over the period 1970-2015. Following the confirmation of the order of integration, our analysis is based on autoregressive distributed lag bound testing to cointegration approach. The key findings are that oil revenues and public investment contributes to Nigeria’s economic growth. However, our findings also indicate that external debt and population growth retards growth. The study suggests that minimizing fiscal deficits and unnecessarily foreign loans by creating tax avenues through the development of the non-oil sectors would reduce the dependency syndrome on a single commodity (oil) in Nigeria.

Solvent free copolymerization of epoxides derived from fatty acid esters of waste cooking oil with phthalic anhydride using (salen)CrIII Cl as catalyst and n-Bu4NCl/DMAP as co-catalyst was carried out for the first time under microwave irradiation, where reaction time was reduced from number of hours to minutes. The polyesters were obtained with molecular weight (Mw = 3084-6740 g/mol) and dispersity values (D = 1.18-1.92), when (salen)CrIII Cl/n-Bu4NCl was used as catalysts. While in case of DMAP as a co-catalyst, polyesters with improved molecular weight (Mw = 5537-6925 g/mol) and narrow dispersity values (D = 1.07-1.28) were obtained even at reduced concentrations of (salen)CrIII Cl and DMAP. The obtained products were characterized and evaluated by attenuated total reflection-fourier transform infrared spectroscopy (ATR-FTIR), proton nuclear magnetic resonance (1H-NMR) spectroscopy, gel permeation chromatography (GPC) and thermogravimetric analysis (TGA) Techniques.

The present reality about the Nigerian economy calls for investment and development in the non-oil sector. This becomes necessary as a result of fall in the oil price in the global market. This paper examined the Bayesian Vector Autoregression (BVAR) modeling and forecasting of the dynamic interrelationship between Economic growth and revenue from the oil and non-oil sectors in Nigeria. To achieve this, annual data on Gross Domestic Product (GDP), revenue from oil and non-oil sectors were collected from Central Bank of Nigeria (CBN) bulletin, the sample from 1981 to 2008 was used for analysis, while sample from 2009 to 2014 was used for model validation. Six (6) versions of Sims-Zha BVAR models were compared for out-of-sample forecast, the result revealed the superiority of the BVAR6 model over the other BVAR models. Lastly, evidence from the decomposition forecast errors revealed that revenue of oil sector contributed 7.69% to GDP while revenue from non-oil sector contributed 0.12% to GDP in Nigeria. This paper therefore recommended that the present government should encourage investment that is geared toward development in the non-oil sector, of which it has the capacity to improve the Economic growth of the Nigerian economy.

In this work, three different types of sandwich structures were manufactured using Formica sheet (a paper-based sheet) as skin and perlite/sodium silicate foam as core with/without the paper honeycomb. The sandwich structures were fabricated by attaching Formica sheets on both sides of the honeycomb, perlite/sodium silicate foam, and perlite/sodium silicate foam-filled honeycomb core panels. The flexural characteristics were studied by a three-point bending test and the thermal conductivity was measured using Lee’s thermal conductivity apparatus. The results demonstrated a significant improvement in flexural properties, including core shear stress, facing stress, bending stress, and energy absorption, when incorporating the paper honeycomb reinforcement. The thermal conductivity and flexural properties were found to be well-compatible with the existing building materials for similar applications in the literature. The failure investigation revealed that the sandwiches with paper honeycomb only prematurely failed due to core buckling, whereas the foam-filled honeycomb core-based sandwiches were able to sustain higher loads, exhibiting material failures such as core shear failure, skin rapture, and delamination. It is found that the foam-filled paper honeycomb sandwich structures can withstand higher bending loads compared to foam core-based and paper honeycomb-based sandwich structures. These developed sandwiches offer potential as green materials due to the characteristics of their constituent materials and can find valuable applications in the building thermal insulation.

Analytical chemistry applied to medical and diagnostic analysis, recently focused on the development of cost-effective biosensors able to monitor the health status or to assess the level of specific biomarkers that can be indicative for several diseases. The improvement of technologies relating to the possibility of non-invasive sampling of biological fluids, as well as sensors for the detection of analytical signals and the computational capabilities of the systems routinely employed in everyday life (e.g. smartphones, computers, etc.), make the complete integration of self-standing analytical devices more accessible. This review aims to discuss the biosensors that have been proposed in the last 5 years focusing on two principal detecting approaches, optical and electrochemical, which have been employed for quantifying different kind of target analytes reaching detection limits below the clinical sample levels required. These detection principles applied to Point-of-care (POC) devices, have been extensively reported in literature and even the limited examples found on the market are based on these strategies. This work will show the latest innovations considering the integration of optical and electrochemical detection with the most commonly reported analytical platforms for POC applications such as paper-based or wearable and implantable devices.

This paper presents an acoustic emission (AE) detection method for refined oil storage tanks, enabling online detection of corrosion points and microleakage in the tank floor. The method utilizes an explosion-proof acoustic emission instrument to detect the floor of a refined oil storage tank. By calculating the time difference between the defective acoustic signal and the speed of acoustic wave transmission, a mathematical model is constructed to analyze the detected signals. A technical scheme for acoustic emission detection in storage tanks is designed, and the instru-ment is used to carry out acoustic emission testing on the product oil storage tank floor. Based on these test results, location analysis of acoustic emission sources is conducted on the bottom plate of the tank, evaluating its corrosion condition accurately. The consistency between the evaluation and subsequent open tank tests confirms that using acoustic emission technology effectively captures corrosion signals from product oil storage tank bottoms. Consequently, it significantly improves inspection efficiency by avoiding unnecessary tank-opening operations. Combining this method with open tank inspection operations such as the leakage magnetic method, one can fully grasp the status of the refined oil storage tanks.

Soil contamination with toxic heavy metals, such as lead (Pb), is a critical environmental issue with adverse effects on ecosystems. Cymbopogon citratus, known as lemongrass, is a medicinal plant with phytoremediation potential for Pb-contaminated soils, besides producing essential oil (EO) and bioactive compounds. Azospirillum brasilense is a plant growth promoting bacteria, and its inoculation into the soil can benefit plants in many ways, such as increased root growth and improved nutrient absorption. This study aimed to investigate the phytochemistry of lemongrass inoculated with A. brasilense and grown in Pb-contaminated soil to assess its responses to inoculation under different Pb levels. The experimental design was completely randomized in a 2 x 5 factorial scheme: two levels of A. brasilense (absence or presence) and five Pb levels (0, 50, 100, 300, and 500 mg Pb kg–1 of soil), totaling 60 experimental plots in ten treatments with six replicates. After four months of treatment, was analyzed total and reducing sugars, total phenolic content, flavonoids, antioxidant activity, antioxidant enzymes, proline, and EO content and composition. Soil Pb levels and A. brasilense inoculation affected phytochemical in lemongrass plants. Azospirillum inoculation reduced total sugars in the roots at all soil Pb levels, while increasing Pb levels favored a rise in sugar contents. There was an increase in flavonoid content in treatments associated with Pb and inoculated with A. brasilense. Antioxidant capacity was lower at lower Pb levels, regardless of bacterial inoculation. Enzymatic response was mainly affected by Pb concentrations between 50 and 100 mg kg–1 soil. EO content was influenced by soil Pb levels, with higher EO production at 500 mg Pb kg–1 soil and without A. brasilense inoculation. Overall, lemongrass cultivation in Pb-contaminated areas can be an alternative for phytoremediation and EO production for the industry. Moreover, A. brasilense inoculation proved to be beneficial in mitigating stress caused by high Pb concentrations in contaminated soils.

This study aimed to develop a high-quality dry emulsion incorporating omega-3, 6, and 9 fatty acid-rich ostrich oil for use as a dietary supplement. Extracted from abdominal adipose tissues using a low-temperature wet rendering method, the ostrich oil exhibited antioxidant properties, favorable physicochemical properties, microbial counts, heavy metal levels, and fatty acid compositions, positioning it as a suitable candidate for an oil-in-water emulsion and subsequent formulation as a dry emulsion. Lecithin was employed as the emulsifier due to its safety and health benefits. The resulting emulsion, comprising 10% w/w lecithin and 10% w/w ostrich oil, was stable, with a droplet size of 3.93 ± 0.11 μm. This liquid emulsion underwent transformation into a dry emulsion to preserve the physicochemical stability of ostrich oil, utilizing Avicel® PH-101 or Aerosil® 200 through a granulation process. Although Aerosil® 200 exhibited superior adsorption, Avicel® PH-101 granules surpassed it in releasing the ostrich oil emulsion. Consequently, Avicel® PH-101 was selected as the preferred adsorbent for formulating the ostrich oil dry emulsion. The dry emulsion, encapsulated with a disintegration time of 3.11 ± 0.14 min for ease of swallowing, maintained microbial loads and heavy metal contents within acceptable limits. Presented as granules containing butylated hydroxytoluene, the dry emulsion showcased robust temperature stability, suggesting the potential incorporation of animal fat into dry emulsions as a promising dietary supplement.

The effect of varying concentrations of crude oil pollution on the germination and growth parameters of Mucuna pruriens (Var. cochinchinenesis) was investigated. The following treatments were used; 0ml, 100ml, 200ml, 400ml, 800ml 1600ml respectively. The germination of velvet bean was 100% but growth was found to be inhibited by a wide range of treatments (800ml and 1600ml). the lag phase of proceeding growth is also reduced at this treatment. Growth inhibition is attributed primarily to the characteristics of oil, which acts as a physical barrier to water and oxygen uptake. Reduction in the growth and development of plants was observed in the polluted treatments as against the control (non–polluted treatment) because of the deleterious effect of the petroleum products on the morphological parameters (plant height, number of leaves and leaf area) tested for. Velvet beans treated with lower treatment (100ml and 200ml) were observed to be more productive when compared to the control experiment. Consequently, as the crude oil exceeds the plant absorbing capacity at 800ml and 1600ml respectively, the growth retards, chlorosis, presence of tough apical meristem, and defoliation from the base of the plant.

Oil and Gas companies, both national and international, along with government regulators, share a common goal of efficiently managing their valuable assets. These assets refer to the Reserves of oil and Gas located underground. Typically, production and Reserves Engineers play a crucial role in managing these reserves through the implementation of well testing techniques. Thus far, the gold standard in this field has been to ensure the optimal management and utilization of these resources. In the context of well testing, the separator has traditionally been considered the gold standard. However, despite regulatory mandates for frequency of well testing (Such as the general requirements of every 30days in the Nigeria south East zone sector), There is a lack of specific regulations regarding the expected flow measurement uncertainties. This gap in the regulations leaves room for improvement in establishing guidelines for accurate flow measurements. This paper aim to Review the various test separator employed, examine the implications of the 30days testing interval under real - world conditions, and critically assess the achievable measurements uncertainties in the field. Additionally, it will provide a candid analysis that sheds light on the expected uncertainties associated with flow measurements. The introduction of the multiphase meters in the past two decades hold the potential for significant advancements in Reservoirs management performance. However, the authors suspect that this potential has not been universally realized. This paper aim to address this issue by examining the extent to which the benefits of multiphase meters have been effectively utilized in reservoir management. By doing so, it seeks to shed light on any existing gaps and propose recommendation for maximizing the impact of multiphase metres in the field. In addition to the aforementioned objectives, this paper will also address and explore the following key aspects:Identification and review of both the strength and weaknesses associated with test separators. By thoroughly examining these attributes, we can gain valuable insight into their effectiveness and potential areas for improvement. Exploration of alternative application of test separator and their impact on well testing efficiency. Real -World comparison will be provided to highlight the advantages and challenges associated with these alternative uses, offering a comprehensive understanding of their implications. Evaluation of the contribution that multiphase flows meters (MPFMs) can bring to the testing scenario and overall performance. By assessing the capabilities and potential benefits of MPFMs, we aim to provide a comprehensive picture of their role in enhancing testing procedures. Examination of the flow measurement uncertainties that can be expected from a test separator and their potential impact on reservoirs management performance. By understanding and quantifying these uncertainties, we can gain insight into how they may affect decision -making and optimization strategies in managing our materials assets effectively. Delving into the question of reconciling multiphase flow meter (MPFMs) with test separators. This analysis aims to inject a sense of realism into the world of managing our major material assets by explaining the challenges and opportunities associated with integrating and aligning these two measurement technologies. By addressing these crucial aspects, this paper strives to provide a comprehensive understanding of the complexities involved in managing our material assets, ultimately driving towards more informed decision-making and improved performance.

Methane is a greenhouse gas and identified as a key driver of near-term climate change. Bottom-up approaches estimate annual methane loss from US natural gas production and transport at 6 Tg, but recent studies suggest this may be an underestimate. To investigate this possibility, an equipment-based emissions inventory, using EPA emission factors, was developed to calculate methane emissions from oil and gas operations in the Delaware Basin, USA. Emission factors and activity data were then updated using contemporary and region-specific measurement data. The original inventory estimated emissions at 315 Gg CH4 y-1 (gas production-normalized rate of 0.6% loss), while the updated inventory estimated emissions of 1,500 Gg CH4 y-1 (2.8% loss). The largest changes resulted from large fugitive emissions from oil production (+430 Gg CH4 y-1), updating maintenance activity emissions (+214 Gg CH4 y-1), considering flaring inefficiency (+174 Gg CH4 y-1), and the inclusion of associated gas venting (+136 Gg CH4 y-1). This study suggests that a systematic underestimate probably exists in current bottom-up inventories and identifies sources currently missing or may be incorrect. We also strongly recommend that emission factors should be validated through direct comparison against measurement campaigns that include long-tail distributions typical of oil and gas activities.

This research aims to delve into the intricacies of combustion processes, specifically focusing on heating oil and a blend of heating oil with TPO (Tire Pirolysis Oil) in a self-developed evaporative combustion chamber featuring steam injection. The primary objective is to scrutinize the impact of steam injection on the combustion dynamics. Conducting a series of tests, the investigation involved the meticulous manipulation of stoichiometric ratios while introducing ambient air through gravity fuel flow. Subsequent iterations of these tests incorporated the introduction of steam into the ambient air stream. The examination encompassed the combustion of both heating oil and the TPO blend within the combustion chamber. The evaluation criteria comprised an in-depth analysis of flame characteristics, temperature distribution within the combustion chamber, and the quantification of emissions such as particulate matter (PM), nitrogen oxides (NOx), carbon dioxide (CO2), carbon monoxide (CO), and water vapor (H2O). Throughout the experimentation phase, commercially available diesel fuel served as the primary fuel source. To facilitate the tests, the combustion chamber under scrutiny was seamlessly integrated into an AVL engine test bench system. Essential parameters, including fuel consumption, were meticulously gauged using an AVL 735 fuel flow meter, while fuel temperature was monitored using the AVL 745 fuel temperature conditioning system. The intake air, a crucial element in the combustion process, was quantified with precision using an AVL Flowsonix sensor. Emission measurements were conducted meticulously using state-of-the-art equipment, with gaseous emissions analyzed using an AVL FTIR AMA i60 exhaust gas analyzer. Simultaneously, soot emissions were quantified through employment of an AVL Micro Soot sensor. This comprehensive approach not only delves into the fundamental aspects of combustion but also extends its reach to the exploration of innovative techniques, such as steam injection, to enhance combustion efficiency and reduce emissions. The integration of advanced measurement tools ensures a robust and thorough analysis of the combustion process and its environmental implications.

Studies on the long-term stability of meat analogs stored under frozen conditions are lacking. Here, we aimed to assess the storage stability of vegetable oil-supplemented meat analogs and analyze the effects of temperature and storage period on their physiochemical characteristics. The meat analogs were prepared by adding 30 g castor oil, orange oil, palm oil, shortening, or margarine vegetable oil based on 100 g of textured vegetable protein. They were then stored at −18 or −60 °C for 6 months and analyzed at one-month intervals. The meat analog supplemented with orange oil had the highest water content, liquid-holding capacity, hardness, and antioxidant activity. During frozen storage, temperature barely affected the meat quality. The storage stability of all meat analog samples was maintained for 6 months, although the quality was slightly reduced with an increase in storage duration. Coliform group bacteria were not detected regardless of the storage condition. Orange oil improved the juiciness of meat analogs, and the quality of samples was maintained for at least 6 months under frozen storage. The findings of this study are relevant to the development and promotion of vegetable meat as an alternative to animal meat.

Krill oil (KO) shows promise as a natural marine-derived ingredient for improving skin health. This study investigated its antioxidant, anti-inflammatory, anti-wrinkle, and moisturizing effects on skin cells and UVB-induced skin photoaging in hairless mice. In vitro assays on HDF, HaCaT, and B16/F10 cells, and in vivo experiments on 66 hairless mice, were conducted. Mice received oral KO administration (100, 200, or 400 mg/kg) once a day for 15 weeks and UVB radiation three times a week. In vitro, KO significantly countered UVB-induced oxidative stress, reduced wrinkles, and prevented skin water loss by enhancing collagen and hyaluronic synthesis. In vivo, all KO dosages showed dose-dependent inhibition of oxidative stress-induced inflammatory photoaging-related skin changes. Skin mRNA expressions for hyaluronan synthesis and collagen synthesis genes also increased dose-dependently after KO treatment. Histopathological analysis confirmed that Krill Oil (KO) ameliorated the damage caused by UVB-irradiated skin tissues. These findings suggest that KO may be a valuable intervention to mitigate UVB-induced skin photoaging and address various skin concerns.

We present functionalization of AISI 316L surfaces by nanosecond Nd:YAG laser texturing in order to modify the surface morphology with crosshatch and dimple patterns. We performed tribological analysis under lubrication with sunflower and jojoba oil with and without addition of solid lubricant, MoS2 nanotubes. In connection to friction/wear response we analysed laser-textured surface wettability, oil spreadability and oil retention capacity. We have shown, that the crosshatch pattern generally exhibited lower friction than the dimples pattern, with the addition of MoS2 nanotubes not having any significant effect on the coefficient of friction under the investigated contact conditions. This was additionally with better oil spreadability and oil retention capacity results of crosshatch textured surface. Furthermore, texturing reduced wear of the stainless steel surfaces but led to approximately one order of magnitude larger wear rate of the steel counter-body, primarily due to the presence of hard bulges around the textured patterns. Overall, the crosshatch pattern showed better oil retention capacity and lower friction in combination with different vegetable oils, thus making it a promising choice for improving tribological performance in various environmentally friendly applications.

During the extraction of palm oil by smallholders in Cameroon, the use of enormous quantities of water results in palm oil mill effluent (POME), which contains substances that are deleterious to the environment at concentrations above the threshold values. A detailed description of the various processes involved is imperative so as to develop methods of reducing loss and minimising the environmental effect caused by the wastes produced. In this study, we characterise the small-holders’ palm oil production sector in Cameroon, along its entire production chain. The main demographics of smallholder farmers are adult males (64.4%) and married (46.7%) with low levels of formal education (51.1% attained only primary education). Plantation establishment involves deforestation of pristine vegetation (46.7%) as well as replacing other farming systems. Processing is carried out by the farmers with their own mills (48.9%) bought at exorbitant prices. Access to finances (51.1%) remains a key limitation to plantation expansion and the adoption of innovations in this sector. Workers’ health issues abound (75.6%) and are treated mainly using ethnomedicine (31.1%), and there is little or no social security; thus, sick workers generally pay their own bills (64.4%). Issues of environmental pollution from production to waste processing abound with solid waste mainly burnt (57.8%) and POME directed into open pits and streams (37.8%) where they become a nuisance and serve as breeding grounds for mosquitoes (51.1%); these issues will require greater state involvement for mitigation. Our findings suggest that farmers in the palm oil sector have deep knowledge base and competence, but government intervention are needed to stimulate further growth in this important sector.

The aim of current study is adjusted and synthesized liposomal compound of N. sativa and evaluation its antifungal properties against C. parapsilosis isolates. Fifteen clinical isolates of C. parapsilosis complex isolates were obtained from hospitalized patients affected by candidemia in Mashhad city, Iran, along with a reference strain of C. parapsilosis (ATCC 22019) were assessed by flight mass spectrometry (MALDI-TOF) method, as described previously. N. sativa is encapsulated in liposomal Nanocariers by using thin film hydration technique. At the beginning liposomal nanoparticles was characterized and confirmed with the dynamic light scattering technique (DLS) and Transmission electron microscopy. Then minimum inhibitory concentration of liposomal N. sativa oil was conducted with the CLSI M27 A3 protocol and finally Cytotoxicity function of N. sativa oil liposomal nanocarriers on PBMCs was investigated and confirmed with MTT assay by the results of this research N. sativa oil-Lip-NP didn’t show any toxic effect on PBMCs and The minimum inhibitory concentration (MIC) range of free N. sativa oil and liposomal formulation with inhibitory effects on candida isolates was between 128 - 8, 250 - 31.25 µg ml also MIC50 and MIC90 were 125,187 and 32,96, µg ml respectively. Due to the hydrophobicity and hydrophilicity, biocompatibility, particle size, non-toxic effect, and higher cell viability of N. sativa oil -Lip-NP, it could be considered a more effective approach to treating fungal infections.

In this paper, the performance and emission characteristics of the engine were investigated with varying ratios of tung oil-based biodiesel blends (B10, B20, and B50) and 0# diesel under different operating conditions. The experimental results indicated that both the power and torque of B10 increased compared with 0# diesel, which increased by 1.9% and 6.6%. But the power and torque of B20 and B50 decreased slightly. The fuel consumption rate increased slightly with an increasing percentage of biodiesel added. In general, the overall emissions of tung oil-based biodiesel blends were lower compared to 0# diesel. Compared to 0# diesel, the CO-specific emissions of B10 decreased by 42.86% at medium and large load, and NOX-specific emissions of tung oil-based biodiesel blends were reduced at all load conditions, except for B50. In addition, HC-specific emissions were all reduced, especially for B20 decreased by 27.54% at 50% load. With the increase of the biodiesel blend ratio, the smoke decreased significantly. Among the blends tested, B50 showed the greatest reduction of 38.05% at 2000 rpm. Overall, it can be asserted that using biodiesel presents a favorable alternative fuel option that can lead to a more environmentally friendly exhaust output.

Indonesia has emerged as one of the leading producers and exporters of palm oil, as supported by data from the Central Bureau of Statistics in 2021, which indicate that Indonesian palm oil exports reached an impressive value of US$ 18.44 billion, or IDR 258 trillion, in 2020, marking an 18.43 percent growth compared to the previous year. Furthermore, the domestic market for palm oil and palm kernel oil remains substantial, despite improvements in export quantities. Various industries, including cooking oil refineries, specialty fats, shortening, margarine, bath soaps, and oleochemicals, present potential markets for palm oil (CPO) and palm kernel oil (PKO). The palm oil industry encompasses four related sub-sectors, namely growers, millers, refiners, and oleochemicals, forming an integrated value chain from upstream to downstream. The current focus on environmental, economic, and social sustainability is driving companies to adopt internal green activities and expand their efforts into sustainability supply chain management (SSCM). Implementing SSCM practices is often seen as economically beneficial, as research has demonstrated their positive impact on firm performance from a resource perspective. Within the palm oil industry, a wide range of green management applications are being utilized. This study aims to examine and highlight the existing sustainable management practices across the entire palm oil supply chain, with a particular emphasis on producing high-quality palm oil. To achieve this objective, the paper utilizes a systematic review methodology, The number of papers analyzed were 62 articles published which involves an extensive review of relevant literature to identify research trends, gaps, and issues. The study seeks to contribute to the body of knowledge by expanding the theory of organizational readiness in preparing globally competitive palm oil products. The research findings hold practical significance for practitioners and academics, providing a comprehensive roadmap for implementing green management applications at the organizational level in the palm oil industry's upstream-to-downstream chain.

In terms of obtaining fuels as well as chemicals with or without catalysts at different conditions, the plum seed stands out as an alternative biomass source. Under varying heating rates (10, 50, and 100ºC min-1) and pyrolysis temperatures (400, 450, 500, 550 and 600 °C), the plum seed was pyrolysed at constant sweep gas flow at a constant rate (100 cm3min-1) in a tubular fixed bed reactor. According to the results, an oil yield reaching to a maximum of %45 was procured at the heating rate of 100 ºCmin-1 and the pyrolysis temperature of 550ºC in non-catalytic procedure. The catalytic pyrolysis was carried out in optimum conditions with two selected commercial catalysts, namely ZSM-5 and PURMOL-CTX and clinoptilolite (natural zeolite, NZ) with catalyst ratio of 10 % of raw material. Along with the catalyst addition, the quantity and the quality of bio-oil increased including the calorific value, removal of oxygenated groups, and hydrocarbon distribution. An increase related to the desirable products like phenols, alkene, and alkane and a decrease in undesirable products like acids were observed in the presence of catalysts. When all the results are considered and evaluated, using zeolite materials in the pyrolysis as catalysts is a recommendable option to achieve enhanced chemicals and fuels.

The current study investigates the antibiofilm properties of essential oil extracted from the Flower of a Zingiber plant used in traditional medicines. EO from Etlingera elatior (Jack) R. M Smith tested against one of the critical nosocomial pathogens, Acinetobacter baumannii. The antibiofilm studies of Flower essential oil (FEO) by crystal violet staining method exhibited maximum inhibition of 80% at a concentration of 0.7% oil. The biochemical assays and microscopic analysis showed that the FEO significantly reduced extracellular polymeric substance production. Furthermore, FEO reduced the survival rate of A. baumannii in human blood. The chemical composition of extracted FEO was analyzed by Gas chromatography- Mass spectrometry. Dodecanal, 1-dodecanol, and alpha-pinene were identified as the major compounds. Concerning previous research, our study is the first investigation of the antibiofilm property of E. elatior flower oil. More detailed studies are required to identify the compound responsible for biofilm inhibition and its mode of action against A. baumannii biofilms.

Clove (Syzygium aromaticum L. Myrtaceae) is an aromatic plant widely cultivated in tropical and subtropical countries, rich in volatile compounds and antioxidants such as eugenol, β-caryophyllene, and α-humulene. Clove essential oil has received considerable interest due to its wide application in the perfumery, cosmetic, health, medical, flavoring, and food industries. Clove essential oil has relevant biological activities to human health, including antimicrobial, antioxidant, and insecticide. This review describes the effect of the extraction method (hydrodistillation, steam distillation, ultrasound-assisted extraction, microwave-assisted extraction, cold pressing, and supercritical fluid extraction) on the chemical composition of essential oil and its correlation with their biological activities. Likewise, are summarized the main compounds and their reported biological activities. Furthermore, the main applications in clove essential oil in the food industry are presented. Finally, this review presents the new biological activities such as anti-inflammatory, analgesic, anesthetic, antinociceptive and anticancer, which are beneficial for human health. This review aims to compile the effect of different methods of extracting clove essential oil on chemical composition, food applications, as well as a current description of biological activities of interest to human health. Biological activities have increased interest in research into this essential oil and its future applications in the food or pharmaceutical industry.

Microorganisms inhabiting subsurface petroleum reservoirs are key players in biochemical transformations. The interactions of microbial communities in these environments are highly complex and still poorly understood. This work aimed to assess publicly available metagenomes from oil reservoirs and implement a robust pipeline of genome-resolved metagenomics to deci-pher metabolic and taxonomic profiles of petroleum reservoirs worldwide. Analysis of 301,2 Gb of metagenomic information derived from heavily flooded petroleum reservoirs in China and Alaska to non-flooded petroleum reservoirs in Brazil enabled us to reconstruct 148 MAGs of high and medium quality. At the phylum level, 74% of MAGs belonged to bacteria and 26% to ar-chaea. The profiles of these MAGs were related to the physicochemical parameters and recovery management applied. The analysis of the potential functional core in the reservoirs showed that the microbiota was specialized for each site, with 31.7% of the total KEGG orthologies annotated as functions (1,690 genes) common to all oil fields, while 18% of the functions were site-specific, i.e., present only in one of the oil fields. The oil reservoirs with lower level of intervention were the most similar to the potential functional core, while the oil fields with longer history of water in-jection had greater variation in functional profile. These results show how key microorganisms and their functions respond to the distinct physicochemical parameters and interventions of the oil field operations such as water injection and expand the knowledge of biogeochemical trans-formations in these ecosystems.

CO₂ enhanced oil recovery (EOR) has been proven its capability to explore the unconventional tight oil reservoirs and potential for geological carbon storage. Meanwhile, the extremely low permeability pores exaggerate the difficulty CO₂ EOR and geological storage processing in the actual field. This paper initiates the ultrasonic-assisted approach to facilitate the oil-gas miscibility development and finally contribute to unlock more tight oils. First, the physical properties of crude oil with and without ultrasonic treatments were experimentally analysed through gas chromatography (GC), Fourier-transform infrared spectroscopy (FTIR) and viscometer. Second, the oil-gas minimum miscibility pressures (MMPs) were measured from the slim-tube test and the miscibility developments with and without ultrasonic treatments were interpreted from the mixing-cell method. Third, the nuclear-magnetic resonance (NMR) assisted coreflood tests were conducted to physically model the recovery process in porous media and directly obtain the recovery factor. Basically, the ultrasonic treatment (40KHz and 200W for 8 hours) was found to substantially change the oil properties, with viscosity (at 60°C) reduced from 4.1 to 2.8mPa·s, contents of resin and asphaltene decreased from 27.94% and 6.03% to 14.2% and 3.79%, respectively. The FTIR spectrum shows the unsaturated C-H bond, C-O bond and C≡C bond in macromolecules were broken from ultrasonic, which caused the macromolecules (e.g., resin and asphaltenes) to be decomposed into smaller carbon-number molecules. Accordingly, the MMP was determined to be reduced from 15.8 to 14.9MPa from the slim-tube test and the oil recovery factor increased by over 10%. This study reveals the mechanisms of ultrasonic-assisted CO₂ miscible EOR in producing tight oils.

Production of wastewater related to the oil and gas industries is increasing over the years. The compounds found in industrial wastewater typically show high toxicity, and in this way, they have become a primary environmental concern. Several techniques have been applied in industrial effluents remediation. In spite of the efforts, these techniques are yet ineffective to treat oily wastewater before it can be discharged safely to the environment. Membrane technology is an attractive approach to treat oily wastewater. This is dedicated to the immobilisation of TiO2 nanoparticles on poly (vinylidene fluoride–trifluoro ethylene) (PVDF-TrFE) porous matrix by solvent casting. Membranes with interconnected pores with an average diameter of 60 micrometres and the contact angle of 97°, decorated with TiO2 nanoparticles, are obtained. The degradation of oily wastewater demonstrated the remarkable photocatalytic efficiency of the nanocomposite membranes: under sunlight irradiation for 7 hours, colourless water was obtained. These results show the suitability of TiO2/P(VDF–TrFE) nanocomposite for photocatalytic applications for oily wastewater remediation.

Our aim was to evaluate efficacy and safety of 30mL CaO alone or plus Asc in bowel preparation before colonoscopy. Two hundred and forty six patients were allocated randomly to ingest 2L PEG with 30mL CaO, 1L PEG with 30mL CaO plus 5g Asc, or 3L PEG. We used Boston Bowel Preparation Scale (BBPS) to evaluate bowel preparation efficacy. We also determined other outcomes such as procedure time, polyp or adenoma detection rate and adverse events (AEs). Of 282 patients recruited, 36 were excluded. Groups were matched for baseline characteristics except weight (P = 0.020) and body mass index (BMI) (P = 0.003). Patient’s satisfaction were higher in 2L PEG-CaO (P = 0.016) and 1L PEG-CaO-Asc groups (P = 0·017). Patients’ compliance was 67.5%, 71.4% and 80.5% in 3L PEG, 2L PEG-CaO and 1L PEG-CaO-Asc groups (P = 0.014). Adequate bowel preparation rate was 75%, 78.57% and 53.66% in 3L PEG, 2L PEG-CaO and 1L PEG-CaO-Asc groups (P = 0.021). There were no differences in terms of remaining outcomes. Despite an increase in patients’ satisfaction and compliance, 1L PEG-CaO-Asc significantly decreased adequate bowel preparation rate. However, 2L PEG-CaO improved the patients' satisfaction and compliance and increased adequate bowel preparation rate.

The production of lycopene from different substrates by Blakeslea trispora in fermentation was investigated. Lycopene productions from 4 and 6 % glucose (pH 6.5) in shake flask fermentation were 77.7 and 28.1 mg L-1. A maximum lycopene concentration of 944.8 mg L-1 was detected with 4 % glucose supplemented with 1.0 % sunflower oil in fermentor studies. Zygospores of B. trispora are the morphological forms, which are responsible for the production of the lycopene. The highest level of zygospores was correlated with the highest amount of intracellular lycopene in the total biomass dry weight. The media containing only orange peel (1 %) gave a 4.9 mg L-1 lycopene production in a fermentor. The presence of oils as substrates resulted in enhanced mold growth and subsequent higher lycopene production. Substrates containing linoleic acid compounds led to high lycopene production. The data showed that the biosynthesis of lycopene starts in most cases simultaneously in the early growth phase even in trace amounts and the amount of lycopene formation increased continuously from 2 to 7 days.

The paper presents a case study and a model for condition monitoring of Diesel engines’ oil of urban buses, through the accompaniment of the evolution of its degradation, with the objective to implement a predictive maintenance policy. Along time, because the usage, there is some decay in the lubricant properties. However, in normal functioning conditions, the lubricants properties, at the time the manufacturers recommend its changing, regardless of they are within the safety limits. Then, based on the accompaniment of the lubricants’ oil condition, the intervals of oil replacement can be enlarged what implies the availability increasing and the corresponding production increasing of the equipment. The model presented in this paper shows its potential to be spread to other types of equipment and organisations that want can implement similar maintenance policies, to achieve the best availability based on the real equipment health conditioning conditions

A novel method proposed in the production of Calophyllum inophyllum biodiesel has been investigated experimentally. In this study, we report the results of biodiesel processing with electromagnetic induction technology. The method used is to compare the results of Calophyllum inophyllum biodiesel processing between conventional, microwave and electromagnetic induction. The degumming, transesterification, and esterification process of the 3 methods are measured by stopwatch to obtain time comparison data. Characteristics of viscosity, density, and Fatty Acid Metil Ester (FAME) were obtained from testing of a Gas Chromatography-mass Spectrometry (GCMS) at the Polytechnic Chemistry Laboratory of the State of Malang. The results show that the biodiesel produced by this method satisfies the biodiesel standards and their characteristics are better than the biodiesel produced by conventional and microwave methods. The electromagnetic induction method also offers a fast and easy route to produce biodiesel with the advantage of increasing the reaction rate and improving the separation process compared to other methods. This advanced technology has the potential to significantly increase biodiesel production with considerable potential to reduce production time and costs.

Ecological and environmental damage caused by oil spillage has attracted great attention. Used cigarette filter (CF) has also caused negative environmental consequences. Converting CF to economical materials is a feasible way to address these problems. In this study, we demonstrate a simple method for production of a highly hydrophobic absorbent from CF. CF was modified by using different volume ratios of octadecyltrichlorosilane and methyltrimethoxysilane. When the volume ratio was 3:2, the modified CF had the high water contact angle of 155°. It could selectively and completely absorb silicone oil from an oil-water mixture and showed a good absorption capacity of 38.3 g/g. The absorbed oil was readily and rapidly recovered by simple mechanical squeezing, and it could be reused immediately without any additional treatments. The as-obtained superhydrophobic modified CF retained an absorption capacity of 80% for pump oil and 82% for silicone oil after 10 cycles. The modified CF showed good elasticity in the test of repeated use. The present study provides novel design of a functional material for development of hydrophobic absorbents from used CF via a facile method toward oil spillage cleanup as well as a new recycling method of CF to alleviate the environmental impact.

The research objectives of this study are to analyse the volatile compositions of different basil types available in Thai markets and to descriptively determine their aromatic qualities. Essential oils were hydro-distillated from fresh leaves of 2 Holy basil (Ocimum sanctum) varieties namely, white and red and other basil species, including Tree basil (O. gratissimum), Sweet basil (O. basilicum var. thyrsiflorum) and Lemon basil (O. citriodorum). Oil physicochemical characteristics and volatile chromatograms from Gas Chromatography-Mass Spectrometry (GC-MS) were used to qualitatively and quantitatively describe the chemical compositions. Methyl eugenol, estragole and eugenol were among the major chemicals found in the essential oils of these basil types. Classification by Principal Component Analysis (PCA) advised that these Ocimum spp. samples are grouped based on either the distinctive anise, citrus aroma (estragole, geranial and neral) or spice-like aroma (β-methyl eugenol, caryophyllene and α-cubebene). The essential oil was also used for descriptive sensorial determination by five trained panelists, using the following developed terms: anisic, citrus, herb, spice, sweet and woody. The panelists were able to differentiate essential oil of white Holy basil from red Holy basil based on the intensity of the anisic attribute, while the anise and citrus scents were detected as dominant in the Lemon basil, Tree basil and Sweet basil essential oils. The overall benefit from this research was the elucidation of aromatic qualities from Thai common Ocimum species in order to assess their potential as the raw materials for future food research and development.

The heat values of waste mineral oils are equal to the heat value of the fuel oil. However, heat value alone is not sufficient for the use of waste mineral oils. as fuel. However, the critical physical properties of fuels such as density and viscosity need to be adapted to the system in order to be used. In this study, the engine oils used in the first 10,000 km of the vehicles were used as waste mineral oil. An organic-based Mn additive was synthesized to improve the properties of the waste mineral oil. It was observed that mixing the Mn additive with the waste mineral oil at different doses (4, 8, 12 and 16 ppm) improves the viscosity of the waste oil and the flash point. The resulting fuel was evaluated for emission using different loads in a 5 kW capacity generator to compare the fuel with standard diesel fuel and to determine the effect of Mn addition. In the experimental study, it was observed that the emission characteristics of the fuel obtained from waste mineral oil were worse than diesel fuel, but some improvement with Mn addition. As a result, we found that the use of waste mineral oils in engines in fuel standards was not appropriate, but may be improved with additives.

Due to the periodic movement of the piston in the reciprocating pump, the fluid will cause pressure pulsation, and the vibration of the pipeline will lead to instrument distortion, pipe failure and equipment damage. Therefore, it is necessary to study the vibration phenomena of the reciprocating pump pipeline based on the pressure pulsation theory. This paper starts from the reciprocating pump pipe pressure pulsation caused by fluid, pressure pulsation in the pipeline and the excited force is calculated under the action of the reciprocating pump. Then, the numerical simulation model is established based on the pipe beam model, and the rationality of the numerical simulation method is verified by the indoor experiment. Finally, a case study is taken as an example to analyze the vibration law of the pipeline system, and proposed the stress reduction and vibration reduction measures. The main conclusions are drawn from the analysis: (1) Excited force is produced in the bend or tee joint, and it can also influence the straight pipe in different levels; (2) In this pipeline system, the pump discharge pipe has a larger vibration amplitude and lower natural frequency; (3) The vibration amplitude increases with the pipe thermal stress, and when the oil temperature is higher than 85°C, it had a greater influence on the vertical vibration amplitude of the pipe.

Much research has been conducted to determine how hair regeneration is regulated, as this could provide therapeutic, cosmetic, and even psychological interventions for hair loss. The current study focused on the hair growth effect and effective utilization of fatty oil obtained from Bryde's whales through high-throughput DNA microarray approach in conjunction with immunohistochemical observations. The research also examined the mechanisms and factors involved in hair growth. In an experiment using female C57BL/6J mice, the vehicle control group (VC: propylene glycol: ethanol: water), the positive control group (MXD: 3% minoxidil), and the experimental group (WO: 20% Whale Oil) were topically applied to the back of the mouse. The results showed that 3% MXD and 20% WO were more effective than VC in promoting hair growth, especially 20% WO. Furthermore, in hematoxylin and eosin-stained skin tissue, an increase in the number of hair follicles and subcutaneous tissue thickness was observed with 20% WO. Whole-genome transcriptomic analysis also showed that 20% WO may have lower stress- and inflammation-related responses than 3% MXD. Therefore, whale oil can be expected to be used as a safe hair growth agent.

The objective of this work was to investigate the deacidification of bio-oils (BOs) from triglyceride-based biomass through the application of liquid-liquid extraction (LLE) in a simple stage, using methanol and water as a binary solvent and feed/solvent ratio of 1/1. For this, the effects of process parameters such as the water content present in the solvent, the content of carboxylic acids present in the bio-oil, and the extraction temperature on the deacidification process through the efficiency and distribution coefficient were evaluated, as well as the effects of such parameters on the quality of deacidified bio-oils through physical-chemical analyzes and GC-MS analysis. The results show that such process parameters significantly affect the quality of deacidified bio-oils. The ideal condition to have the highest acid removal, i.e., the highest deacidification efficiency (72.65%), is the one in which the deacidification process is performed with aqueous methanol (5% water) at 35 °C and for BOs that have a total acid number (TAN) equal to 24.38 mg KOH/g. Therefore, the process of deacidification by LLE using aqueous methanol is a promising alternative for removing carboxylic acids and other oxygenated compounds, contributing significantly to the upgrading or improving biofuels produced by catalytic thermal cracking.

Conobea scoparioides (Plantaginaceae) is an herbaceous plant known as "pataqueira" that grows wild in seasonally wet areas of the Amazon region. It is used for aromatic baths and anti-protozoan remedies by the Brazilian Amazon native people. The main volatile compounds identified in the essential oil of "Pataqueira" were the phenolic monoterpenes thymol and thymol methyl ether and their precursors, the monoterpene hydrocarbons α-phellandrene and p-cymene. A hydrotalcite synthesized from blast-furnace slag exhibited a 3:2 (Mg/Al) molar ratio, and this layered double hydroxide (LDH) was evaluated as a catalyst in converting the main monoterpenes of the "Pataqueira" oil. This action significantly increased thymol content, from 41% to 95%, associated with the percentual reduction of other main components, such as thymol methyl ether, α-phellandrene, and p-cymene. The LDH reaction showed a strong tendency towards producing hydroxylated derivatives, and its behavior was similar to the hypothetical plant biosynthetic pathway, which leads to the production of the monoterpenes of "Pataqueira" oil. Thymol and its derivatives are potent antiseptics applied in pharmaceutical and hygienic products as antibacterial, antifungal, and antioxidant properties, among others. The present work reports a natural source with a high thymol content in aromatic plants from the Amazon, with evident economic value.

This study explores the development of an oil-in-water (O/W) emulsion with a high concentration of ostrich oil, rich in omega-3, -6, and -9 fatty acids, for potential skincare applications. Utilizing Span and Tween emulsifiers, an optimized O/W emulsion containing 20% w/w ostrich oil and 15% w/w mixed emulsifiers was formulated through homogenization, demonstrating the smallest droplet size (5.01 ± 0.43 μm) and appropriate zeta potential (-32.22 mV). The emulsion exhibited antioxidant and antibacterial properties against Staphylococcus aureus, suggesting its suitability for skincare. Stability tests over 6 months at varying temperatures (4 °C, 25 °C, 45 °C) confirmed the emulsion's physical and microbial stability, emphasizing its potential for topical applications. Despite slight changes in acid values (AV) and peroxide values (PV), results remained within acceptable limits. Cytotoxicity assessments on human dermal fibroblasts indicated the emulsion's safety, supporting its suitability for skin application. The emulsion demonstrated antibacterial efficacy against S. aureus and enhanced antioxidant activity compared to ostrich oil alone. The study underscores the importance of emulsification in optimizing the efficacy and stability of ostrich oil in skincare formulations, offering valuable insights for practical applications where stability is critical.

Insect meal as a protein source has been considered a sustainable way to feed animals. H. illucens and T. molitor larvae meal are considered high protein sources for poultry, also presenting considerable amounts of fatty acids, vitamins, and minerals. However, other potential components in insect meal and insect oil have been more studied nowadays. Chitin, lauric acid, and antimicrobial peptides can present antimicrobial and prebiotic functions, indicating that low inclusions of insect meal can beneficially affect broilers` health and immune responses. This systematic review was developed to study the impact of insect products on health parameters of broilers, and a metanalysis was conducted to evaluate the effects on performance. A database was obtained based on a selection of manuscripts from 2016 to January 2023, following the mentioned parameters. There were positive effects of both H. illucens and T. molitor meal or oil products on poultry health status, especially in microbiota population, immune responses, and antimicrobial properties. The average daily gain was greater in broilers fed T. molitor meal compared to H. illucens meal (p = 0.002). The results suggest that low levels of insect meal were suitable for broilers, without result in negative effects on performance, while the insect oil can totally replace soybean oil without negative impacts.

Thymus is an herbaceous perennials or subshrubs of the Lamiaceae family and is widely distributed worldwide. Essential oils extracted from thymus have attracted much attention owing to their potential biological functions. Here, we evaluated the chemical compositions of eight thyme essential oils (TEOs) using gas chromatography-mass spectrometry and assessed their antioxidant activity and in potential role in antibacterial and tumor therapy. The results showed that (1) the main components in eight TEOs were monoterpene hydrocarbons and oxygenated monoterpenes, and the chemical compositions of TEOs were affected by the specie factor; (2) eight TEOs could be divided into 3 groups (thymol-, geraniol-and nerol acetate-type), and thymol was main type; (3) eight TEOs had some common compounds, such as thymol and p-cymene, which were the main components in seven TEOs; (4) eight TEOs had antioxidant activit, and thymol-type EOs had strong antioxidant activity, while geraniol-type EOs had relatively weak antioxidant activity. In addition, it was found thymol had strong antibacterial activity against the growth of Escherichia coli and Staphylococcus aureus, and antimigratory activity of A549 cell. Overall, our results can provide theoretical basis for further exploring the function of natural products from thyme essential oils.

Cambodian spices Amomum kravanh, Citrus hystrix and Piper nigrum 'Kampot' have long history of seasoning of food products. In this study, essential oils (EOs) and supercritical CO2 extracts from all three species have been analyzed using GC-MS with two columns of different polarity, whereas EO and CO2 extract from P. nigrum fruits and CO2 extract from the peel of C. hystrix have been isolated and analyzed for the first time. The results showed that A. kravanh EO contained mostly eucalyptol (78.8/ 72.6 %), while CO2 extract was rich in oleic acid (29.26 %) and tricosane (14.74 %). C. hystrix EO was rich in β-pinene (29.95/29.45 %), followed by D-limonene (24.54/23.24 %) and sabinene (9.94/10.23 %). β-pinene (30.2/28.9 %), D-limonene (23.99/23.74 %) and sabinene (13.36/19.55 %) were also predominant in the CO2 extracts. β-Caryophyllene was the main constituent of both EO and CO2 extract from P. nigrum 'Kampot' with contents ranging from 37.84 to 55.84 %, followed by 3-carene (from 7.18 to 18.72 %). Such findings suggest that supercritical CO2 can potentially be used for extraction of all three Cambodian spices. Nevertheless, further research determining the most efficient extraction parameters will be needed before its application in the spice processing practice.

As one of the important wastes, waste PET pollutes human living and natural environment seriously. PET is an important solid waste that needs to be recycled at present. The complete degradation of PET was realized at low temperature. The lipophilic hydrophobic membrane was formed on the surface of stainless steel mesh (SSM) by a simple dip coating method, and the oil-water separation material was successfully prepared. Due to the load of degradation products, the surface roughness of SSM increased from 19.09 μm increased to 62.33 μm. The surface changed from hydrophilic to hydrophobic, and the water contact angle increased to 123o. The oil-water separation flux of modified SSM is 9825 L/(m2·h) and the separation efficiency is 98.99%. The modified SSM has good reuse performance. This hydrophobic modification method can also be used to modify other porous substrates, such as activated carbon, filter paper, foam, and other materials. In this study, the porous substrate modified by the degradation product of waste PET was used to prepare oil-water separation materials, which not only solved the problem of white pollution, but also reduced the dependence on non renewable resources in the conventional preparation methods of oil-water separation materials. The research provided new raw materials and methods for the industrial production of oil-water separation materials, and had important application prospects.

Every simplification has the potential to add a systematic error to the measured value. Sometimes, the addition does not render the measurement useless. In the case of oil well flow measurements based on the thermal properties of the fluid in the well, the addition of a systematic error of up to 20% can occur if the variation in the internal energy of the fluid and, most importantly, the transient nature of heat transfer in the completion are not taken into account. This error is a mathematical consequence of the simplifications chosen. To work within the first hours of good operation, given the need for immediate application in a prototype water injection well developed and installed at the UFRN, this article presents an analytical solution for calculating the flow rate by solving the differential equations obtained by applying the principles of mass and heat transfer. As a result, at the cost of greater complexity, the systematic error drops to values of less than 1% in the first two hours of operation of the well, as seen throughout this document.

As abiotic stress, drought limits plant growth and minimizes productivity. The increased request for valuable essential oil extracted from geranium (Pelargonium graveolens L.) is mainly associated with plant growth, which is adversely affected by drought. Melatonin (MT) has been used to enhance plant growth under abiotic stress, however, its impact to overcome drought stress of aromatic plants including geranium is poorly investigated. In the current investigation, MT application at 100 µM was applied under 100 % (well-watered) or 50 % (drought stress) of FC to verify this role. Drought stress markedly reduced growth parameters, herb yield, and total chlorophyll; however, MT alleviated these effects. In contrast, drought enhanced the essential oil percentage in geranium leaves. Despite the reduction in oil yield caused by drought, MT application mitigated this reduction and improved both oil yield and oil components. Besides, MT treatment enhanced the accumulation of total phenols, glutathione, and proline and improved the activity of ascorbate peroxidase, catalase, and glutathione reductase with possible alleviation of drought-induced oxidative damage. Therefore, it reduced both H2O2 and malondialdehyde accumulation, and finally maintained membrane integrity. Overall, this is the first report that reveals that MT application can improve geranium resistance to drought by enhancing the antioxidant potential and protecting the cell membrane from oxidative damage.

The pathophysiology of irritable bowel syndrome in children involves multiple factors. Thus, treatment options are variable, targeting diet and the child’s and parents’ behav-ior, involving pharmacological and psychological interventions or neuromodulation. Parents are increasingly interested in complementary and alternative therapies for children with irritable bowel syndrome, especially when other treatments have been tried without relieving the child’s symptoms. This paper looks into current evidence for the benefits and side effects of herbal remedies and spices in pediatric patients with IBS. The benefits of peppermint oil, STW5, Psyllium fiber, Curcuma, ginger, and other herbal medicines are discussed based on findings in the current literature.

The oil spilled from the Gulf war caused land pollution and various petroleum compounds. Among petroleum compounds, polycyclic aromatic hydrocarbons (PAHs) are known for toxicity, and have been designated as carcinogenic, mutagenic, and endocrine disrupting substances by the United States Environmental Protection Agency (USEPA). According to the USEPA, toxic equivalents quotient (TEQ), and mutagenic equivalents quotient (MEQ) can be calculated by multiplying the toxic equivalency factor (TEF) and mutagenic equivalency factor (MEF) by the concentration of PAHs. The USEPA calculates the relative TEF for other PAHs by setting the TEF value of benzo(a)pyrene, which is highly toxic, to 1. Relative MEF is also calculated in the same way. In this study, the TPH concentrations of crude oil-contaminated soils collected from the Burgan in Kuwait were measured to be 5, 8, and 20% and TEQ and MEQ of the soils were calculated by multiplying the 16 PAHs concentrations measured for each sample by TEF and MEF, respectively. When the TPH concentration was increased by 4 times from 5% to 20%, the TEQ was increased by about 9 times and the MEQ was increased by about 10 times. Therefore, it was concluded that as the TPH concentration increases, the carcinogenicity and mutation rate increase greatly. In addition, ecotoxicity assessment was performed using luminescent bacteria to compare the relationship between the calculated TEQ and MEQ and actual ecotoxicity, and benzo(a)pyrene among 16 PAHs showed a coefficient of determination of 0.95. In this study, ecotoxicity in PAHs-contaminated environment can be estimated by analyzing benzo(a)pyrene as a representative substance.

This study explores the impact of temperature and molarity on the pyrolysis of Açaí seeds (Euterpe Oleraceae, Mart.) activated with KOH on the yield of bio-oil, hydrocarbon content of bio-oil, an-tioxidant activity of bio-oil and chemical composition of aqueous phase. The experiments were carried out at 350, 400, and 450 °C and 1.0 atmosphere, with 2.0 M KOH, and at 450 °C and 1.0 atmosphere, with 0.5 M, 1.0 M and 2.0 M KOH, in laboratory scale. The composition of bio-oils and aqueous phase determined by GC-MS, while the acid value, a physical-chemical property of fundamental importance in biofuels, of bio-oils and aqueous phases by AOCS methods. The an-tioxidant activity of bio-oils determined by the TEAC method. The solid phase (biochar) charac-terized by X-ray diffraction (XRD). The diffractograms identified the presence of Kalicinite (KHCO3) in biochar, and those higher temperatures favor the formation peaks of Kalicinite (KHCO3). The pyrolysis of Açaí seeds activated with KOH show bio-oil yields from 3.19 to 6.79 (wt.%), aqueous phase yields between 20.34 and 25.57 (wt.%), solid phase yields (coke) between 33.40 and 43.37 (wt.%), and gas yields from 31.85 to 34.45 (wt.%). The yield of bio-oil shows a smooth exponential increase with temperature. The acidity of bio-oil varied between 12.3 and 257.6 mgKOH/g, decreasing exponentially with temperature, while that of aqueous phase between 17.9 and 118.9 mgKOH/g, showing and exponential decay behavior with temperature, demonstrating that higher temperatures favor not only the yield of bio-oil but also bio-oils with lower acidity. For the experiments with KOH activation, the GC-MS of bio-oil identified the presence of hydro-carbons (alkanes, alkenes, cycloalkanes, cycloalkenes, and aromatics) and oxygenates (carboxylic acids, phenols, ketones, and esters). The concentration of hydrocarbons varied between 10.19 to 25.71 (area.%), increasing with temperature, while that of oxygenates from 52.69 to 72.15 (area.%), decreasing with temperature. For the experiments with constant temperature, the concentrations of hydrocarbons in bio-oil increase exponentially with molarity, while those of oxygenates de-crease exponentially, showing that higher molarities favor the formation of hydrocarbons in bio-oil. The antioxidant activity of bio-oils decreases with increasing temperature, as the content of phenolic compounds decreases, and decreases with increasing KOH molarity, as higher molarities favors the formation of hydrocarbons. Finally, it can be concluded that chemical activation of Açaí seeds with KOH favors the not only the yield of bio-oil but also the content of hydrocarbons. The study of process variables is of utmost importance in order to clearly assess reaction mechanisms, economic viability and design goals that could be derived from chemically activated biomass pyrolysis processes.

Seven pieces of Lacquer Lian from Warring States Period to Yuan Dynasty were analyzed by means of cross-section observation, Raman spectroscopy (RS) and thermally assisted hydrolysis and methylation pyrolysis coupled with gas chromatography/ mass spectroscopy (THM-Py-GC/MS). The results demonstrate that Lacquer Lian was consisted by three layers, including pigment layer, undercoat layer and ground layer, and lacquering techniques had undergone minimal changes from Warring States Period to Yuan Dynasty, the red mineral pigment was cinnabar, the lacquer sap was urushi. Furthermore, Boiled tung oil was found in the ground layer of lacquerwares from Song Dynasty and Yuan Dynasty.

Mentha is one of the predominant cash crops in India. However, it is a heavy feeder of nutrients. Organic sources of nutrients not only help in adequate nutrition but also maintain favorable physicochemical and biological soil environments. The present study was conducted to evaluate the response of different combinations of nutrients with microbial bio-fertilizer on mentha crops from 2020 to 2022. The experiment was carried out in the Randomized Complete Block Design with four replications and eight treatments viz; T1 - Control, T2 - RDF (N 75 kg ha-1, P2O5 20 kg ha-1), T3 - RDF + water soaking of roots, T4 - RDF + root soaking with bio-fertilizer, T5 - RDF + bio-fertilizer @ 10 kg ha-1, T6 - 100% N from FYM + water soaking of roots, T7 - 100% N from FYM + root soaking with bio-fertilizer and T8 - 100% N from FYM + bio-fertilizer @ 10 kg ha-1. The treatment T8 (100% N from FYM + bio-fertilizer @10 kg ha-1) significantly outperformed and recorded the highest growth and yield attributes viz; emergence count, stools count, plant height, leaf area index, leaf stem ratio, fresh and dry herb yield.

Objectives The aim of the study is to evaluate the effectiveness of extra virgin olive oil (EVO) and fruity oil for the treatment of gingivitis. Materials and Methods. A sample of 75 patients with gingivitis induced by plaque bacteria, over 18 years of age, was divided into three groups: a study group A with extra virgin olive oil, a study group B with fruity oil and a control group C. In the two study groups, Evo oil was administered as a mouthwash in patients with gingival inflammation. The protocol included a daily application of the product for 30 days, with three recalls 15 days apart. Clinical parameters of plaque formation and gingivitis - plaque index (PI), bleeding index (BI) were assessed at each recall and scored on a specific periodontal chart. The control group re-ceived no mouthwash treatment to normal daily oral hygiene procedures, and the same clinical parameters as the study group were evaluated. Data were evaluated using SPSS 27.0 software for Windows (SPSS Inc., Chica-go, IL, USA). Then, the pre- and post-treatment values of the groups were compared using the t-student test, set-ting P < 0.05 as the significance level. Results Comparison with the three groups showed that extra virgin olive oil was an adjuvant in the treatment of gingival inflammation, improving PI and BI. In group A, mean plaque index had a 48% reduction and bleeding index 64% reduction, after 30 days. In group B, the mean plaque index had a 35% reduction and a bleeding index reduction of 43%, after 30 days. Conclusion The collected data showed significant improvements in the formation of bacterial plaque and gingi-vitis. the exact mechanism of such treatment is still to be elucidated. As a result of this, further studies with a different sample of patients to those used and a comparison with other products need to be addressed to verify and demonstrate the antibacterial and anti-inflammatory effect of the components of this natural product.

Corn starch-based nanocomposite films usually have low moisture barrier properties. The addition of virgin coconut oil (VCO) as a hydrophobic component can improve the nanocomposite film's characteristics, especially the film's permeability and elongation properties. This study aimed to determine the role of VCO with various concentrations (0,3,5 wt%) on the physical, mechanical, and water vapor transmission characteristics of corn starch/NCC-based nanocomposite films. The results showed that the concentration of 3 wt% VCO was most effective in reducing the WVTR value of nanocomposite films with a value of 4.721 g/m2.h. While the value of tensile strength was 4.243 MPa, elongation 68.58%, modulus of elasticity 0.062 MPa, thickness 0.219 mm, lightness 98.77, and water solubility 40.51%. However, the addition of 5 wt% VCO was more effective in increasing the elongation properties of the film. The addition of VCO gave the appearance of a porous film surface and a finer structure was formed. The FTIR test on corn starch nanocomposite films with the addition of VCO did not show any new absorption peaks. The results of this study may provide opportunities for the development of nanocomposite films as biodegradable packaging in the future.

With the popularization of natural gas and the requirements for environmental protection, the development and utilization of natural gas is particularly important. The status of natural gas in China's oil and gas exploration and development is constantly improving, and the country is paying more and more attention to the exploitation and utilization of natural gas. The Upper Paleozoic tight sandstone in the Ordos Basin is characterized by low porosity, low permeability and large area of concealed gas reservoirs. By injecting CO2 into the formation, the recovery of natural gas can be improved, and at the same time, the stable storage of CO2 can be achieved to achieve a win-win situation of CO2 emission reduction and utilization. Injecting greenhouse gas CO2 into gas reservoirs for storage and improving recovery has also become a hot research issue. In order to improve the recovery efficiency of tight sandstone gas reservoir, this paper takes the complex tight sandstone of Upper Paleozoic in Ordos Basin as the research object, through indoor physical simulation experiments, carried out the influence of displacement rate, fracture dip angle, core permeability, core dryness and wetness on CO2 gas displacement efficiency and storage efficiency, and analyzed the influence of different factors on CO2 gas displacement efficiency and storage efficiency to improve the recovery and storage efficiency. The research results show that under different conditions, when the CO2 injection pore volume is less than 1PV, the relationship between the CH4 recovery rate and the CO2 injection pore volume is linear, and the tilt angle is 45 °. When the CO2 injection pore volume exceeds 1PV, the CH4 recovery rate increases slightly with the increase of displacement speed, the recovery rate of CO2 displacement CH4 is between 87% - 97%, and the CO2 breakthrough time is 0.7PV-0.9PV. In low-permeability and low-speed displacement cores, the diffusion of CO2 molecules is more significant. The lower the displacement speed is, the earlier the breakthrough time of CO2 is, and the final recovery of CH4 slightly decreases. Gravity has a great impact on CO2 storage and enhanced recovery. The breakthrough of high injection and low recovery of CO2 is earlier, and the recovery of CH4 is about 3.3% lower than that of low injection and high recovery. The bound water makes the displacement phase CO2 partially dissolved in the formation water, and the CO2 breakthrough lags about 0.1PV. Ultimately, CH4 recovery factor and CO2 storage rate are higher than those of dry core displacement. The research results provide theoretical data support for CO2 injection to improve recovery and storage efficiency in complex tight sandstone gas reservoirs.

Interest in developing novel crop protectants has gained attention in the recent decade due to the hazardous effects of synthetic pesticides on humans and the environment. The citrus industry worldwide is threatened by the D. citri, the primary vector of phlo-em-limited bacterium (HLB) or citrus greening. However, there is no cure for citrus greening available. Diaphorina citri management largely depends on synthetic insecticides, but their massive application leads to resistance in pest populations. Therefore, alternative pest management strategies are needed. Our results indicated fewer D. citri adults settled on plants treated with ABEO than on control 48 h after re-lease. The psyllid fed on citrus leaves treated with ABEO significantly secreted less honeydew than the control. The essential oil showed potent ovicidal activity against the D. citri eggs with LC50 5.88 mg/mL. Furthermore, we also explore the fitness of D. citri on ABEO-treated and untreated Citrus × sinensis by using two-sex life table tools. The results indicated that the intrinsic rate of increase (r) was higher on untreated seedlings (0.10 d−1) than those treated with a sub-lethal dose of ABEO (0.07 d−1). Similarly, the net re-productive rate (R0) was higher for untreated seedlings (14.21 offspring) than those treated (6.405 offspring). Notably, the ABEO were safer against Aphis melifera, with LC50 ranging from 31.05 to 55.86 mg/mL, which is relatively higher than the LC50 24.40 mg/mL values against D. citri. Our results indicate that ABEO exhibits toxic and behavioral effects on D. citri that could be useful for managing this pest.

The Gulong shale oil reservoir is formed in freshwater to slightly saline lacustrine basins, mainly consisting of pure shale geological structure, which is quite different from other shale reservoirs around the world. Currently, the development of Gulong shale oil mainly relies on hydraulic fracturing, while the subsequent shut-in period for imbibition has been proven to be an effective method for enhancing shale oil recovery. To clarify the characteristics of fluid occurrence space and the variation of fluid occurrence during saltwater imbibition in Gulong shale, this paper carried out porosity and permeability tests on Gulong shale cores, and analyzed the fluid occurrence space characteristics and imbibition oil recovery based on nuclear magnetic resonance (NMR). In the porosity and permeability tests, the porosity measured by saturation method was calibrated using NMR T2 spectra. Combined with the identification of fractures in shale cores using micro-CT and the analysis of porosity and permeability parameters, it was found that the permeability of shale cores was related to the development of fractures in shale cores. Through the testing and analysis of NMR T1-T2 two-dimensional spectra of the shale cores before and after saturation with oil, it was found that the shale mainly contains heavy oil, light oil, and clay-bound water, and they were distributed in different positions in the T1-T2 spectrum. Finally, the T1-T2 two-dimensional spectra of the shale core at different imbibition stages were analyzed, and it was found that the saltwater mainly entered the minuscule inorganic pores of clay minerals during the imbibition process, and squeezed the larger-sized inorganic pores containing light oil through the hydration expansion effect, thus expelling the light oil from the shale core and achieving the purpose of enhanced oil recovery.

In the increasingly complex environment of downhole working conditions such as frequent opening and closing of oil and gas wells, acidification/multi-stage fracturing, steam huff and puff, and strong injection and production, the traditional casing string design method standards based on strength design have gradually highlighted their limitations. It is necessary to formulate string design method standards that consider the full life cycle of wells such as drilling and completion, fracturing, and production operations. Starting from the analysis of the advantages and disadvantages of traditional casing string design methods, this paper presents the characteristics of the strain design methods and seal design methods that have been formulated for the life cycle of the string. The strain design method breaks through the traditional design concept and allows the design concept of controllable deformation of the pipe string. The sealing design method is currently the only standard method for the design of tubing strings. At the same time, it further proposes to consider the trend of pipe strength deterioration and establish a time dimension-based life cycle pipe string design method standard, which effectively solves the safety problem of pipe string design in production and operation.

This article provides insight into flow measurement techniques in water injection wells in oil production fields, with a particular focus on the initial phases of operation. Consequently, the method created by Ramey in 1962, originally intended for estimating the temperature of the injection fluid, has been adapted to calculate the flow rate. In this technique, the calculation This procedure is based on the correlation between the thermal flux formed in the well. The discrepancy between the temperatures of the injected liquid and the geothermal temperature of the reservoir is the main source of the systematic errors in Ramey’s technique. To a lesser extent, but still significant, failure to observe the injection time in a fluid variation also results in an error problem that needs the failure to adhere to the scheduled injection time for a fluid alteration also yields a notable error dilemma that needs to be fixed. The reduction of listed systematic errors is the product of the main part of this article.

This research was conducted with the aim of knowing how to compare the financial performance of the oil and gas trading industry with cross-sectional analysis techniques. The type of research conducted in this research is qualitative research with research objects at several companies, namely PT Radiant Utama Interinsco Tbk, PT Elnusa Tbk, PT AKR Corporindo Tbk, and PT Aneka Gas Industri Tbk. The data used in this study comes from secondary data, namely the internet in the form of company financial reports for the 2019-2021 period obtained from the Indonesia Stock Exchange. The results of this study indicate that PT Radiant Utama Interinsco Tbk has the best financial performance on inventory turnover ratio and average age, PT Elnusa Tbk has good inventory performance on current ratio, quick ratio, DAR, and DER., PT AKR. Corporindo Tbk has performed well on the ratios of TIE, FCC, Dividend Payout, Dividend Yield, and PER. PT Aneka Gas Industri Tbk has performed well on the ratio of Receivables Turnover Ratio and Average Age of Receivables.

Staphylococcus aureus frequently causes subclinical mastitis around the world with high impact in milk industry and public health. Essential oils (EO) are recognized antimicrobials that can be synergistic with antibiotics. The main objective of this study was evaluating the essential oil (EO) of Melaleuca armillaris as an adjuvant of erythromycin (ERY) for the alternative treatment of bovine mastitis caused by S. aureus. The Minimum Inhibitory and Bactericidal Concentrations (MIC and MBC) of EO, ERY, and its combinations were established against S. aureus at different pHs (7.4, 6.5 and 5.0), emulating extra and intracellular conditions. Sensible (N=3) and resistant (N=3) strains to ERY and S. aureus ATCC 29213 as control were used. Math models were applied to described the antibacterial activity of EO and combinations EO-ERY. The EO was bactericidal against all the strains independently of the pH with a slightly improvement in acid conditions. The synergism between EO and ERY was estimated by the Fractional Inhibitory Concentration Index (FIC) and by mathematical modeling of the bacterial killing data. Synergism was observed with ERY, where combinations had bactericidal activity also even with pH modification. M. armillaris EO is an interesting adjuvant for ERY, being a promissory option for further analysis of intracellular efficacy against S. aureus.

Agricultural wastes have posed as a treat to the environment over the years and they are found in large quantities due to domestic and industrial utilization of such materials in under developed and developing countries. The inability to recycle this waste has led to researches on how to use them in carrying out productive industrial activities. The aim of this study is to use Central Composite Design (CCD) to optimize the bleaching effects by snail shell as adsorbents on crude palm oil. The predictive ability of the model was close to accurate using MINITAB 19 software with the design application for the process simulation for % FFA yield to have 75.856% for experimental and 77.587% for predicted yield with just 1.731% residual. The saponification value increased with adsorption, and it indicates that palm oil can be used for soap making.

Oil palm is one of the most important crops in Malaysia. Lately, the production of oil palm has been reduced due to a variety of factors, including the weather and climate. Temperature, wind speed, relative humidity, sunshine, and rainfall distribution all have an impact on palm tree growth and development, which in turn has an impact on oil palm production. This paper aims to investigate the effects of some weather elements (temperature, wind speed, relative humidity, sunshine, and rainfall) on oil palm production in Peninsular Malaysia. Data were analyzed using the Statistical Package for Social Sciences (SPSS 20.0 version), with descriptive statistics, and multiple linear regression (MLR). The MLR model determined the strength of the relationship between oil palm yield (dependent variable) and the changing variables of temperature, sunshine, wind speed, relative humidity, and rainfall (independent variables). The findings revealed that temperature, wind speed, relative humidity, sunshine, and rainfall have a low impact on oil palm production and yield turnover. The R2 value of 0.202 shows that the independent variables explained only 20.2% of the fluctuation in palm oil production. The study recommends working within an integrated approach involving scientific research, planting, improving variety, improving regional academic leadership, and engaging private and public stakeholders, emphasized collaborative efforts with researchers in consumer countries, and strengthening the capacity of growers to best agroecological practices.

The prominent cultivation of lemongrass relies on the pharmacological incentives of its essential oil. The lemongrass essential oil (LEO) has a significant amount of citral (mixture of geranial and neral), isoneral, isogeranial, geraniol, geranyl acetate, citronellal, citronellol, germacrene-D, and elemol in addition to numerous other bioactive compounds. These components confer various medicinal activities to LEO including antifungal, antibacterial, antiviral, anticancer, and antioxidant properties. These attributes are commercially exploited in pharmaceutical, cosmetics, and food preservations industries. Furthermore, the employment of LEO in the treatment of cancer opens a new vista in the field of therapeutics. Although different LEO components have shown promising anticancer activities in vitro, these effects have not been assessed yet in humans. Further studies on the anticancer mechanisms exerted by lemongrass components are required. The present review intends to provide a timely discussion on the relevance of lemongrass extracts in cancer and health treatment, and in food industry applications.

This study was carried out in three phases. During the first stage, the physicochemical properties of French sauce prepared from different blends of soybean and olive oils were evaluated. In the second stage, the oxidative stability of the optimum sauce sample from the first stage enriched with various amounts of olive leaf polyphenolic extract (OLE) (obtained via ultrasound-assisted extraction) was investigated over 90 days of storage. During the third stage, the microbiological and sensory properties of the samples containing the optimum amounts of OLE, as a substitution for the synthetic preservatives, were studied. According to the results, addition of olive oil at higher levels (75 and 100%) could affect the physicochemical properties of the sauce as compared to the control sample. It was also found that the addition of olive oil (up to 50%) would not significantly impact the sauce properties. Regarding the OLE enrichment in the samples, it was found that high levels of OLE could improve the oxidative stability of the samples. Based on the results of the experiments in the third phase, it was found that OLE could be used as a preservative instead of the commercial ones. Overall, this study suggests the potential use of olive oil and olive leaf extract in the preparation of French sauce to boost its nutritional value and its stability.

Atlantic salmon (Salmo Salar) is one of the fish species that rich in omega-3 fatty acids. Consumption of omega-3 fatty acids can lower down the risk of cardiovascular disease and coronary heart disease. The extraction of omega-3 fish oil from Atlantic salmon by using hexane and isopropanol was conducted in this research. Response Surface Methodology (RSM) was used to study the impact of parameters which were temperature (50-90°C), centrifuge speed (1000-3000rpm) and solvent ratio of hexane to isopropanol (0.5-1.5) to the percentage of oil yield. The results obtained shows that 15.23%± 0.61 of oil yield from Atlantic salmon under an optimum condition of 70°C, 3000 rpm and solvent ratio of hexane to isopropanol of 1.5. The acid value, peroxide value and p-anisidine value of the fish oil obtained were 7.48 mg KOH/g, 1.94 meq/kg and 5.56 respectively which were all within the acceptable limit which stipulated by Global Organization for EPA and DHA (GOED) and Food and Agricultural Organization of the United Nations (FAO). The FTIR analysis proved the presence of alkane and carboxylic acid in the fish oil. Furthermore, GC-MS analysis showed that the fish oil contains higher monounsaturated fatty acids (MUFA) contents followed by polyunsaturated fatty acids (PUFA) and 4.5525% of total omega-3 fatty acids.

Changes in crude oil price affect the shipping freight market in three different channels. This study explores the dependence structure between oil prices and maritime freight rates to identify the strongest channel. Therefore, it investigates the relationship between oil prices and three major maritime freight rates; the Baltic Dry Index (BDI), the Baltic Dirty Tanker Index (BDTI), and the Baltic Clean Tanker Index (BCTI). We employ the decomposition method, not studied in the existing literature. The copula approach identifies the time-varying effects and asymmetry in the tail dependence structure between oil prices and freight rates. The main results of this analysis are as follows. The decomposed components display different conditional dependence patterns, and asymmetry is revealed in the upper and lower tail dependence. In the long run, we find more dependence in extreme periods like the financial crises. In short-run fluctuations, we find the dependence increases in an economic boom. The implications of the results suggest that dependence can vary over time and may change depending on extreme events, implying that the complementary strategies of the long run and short run should be different.

This study aimed to determine the Gas Chrommatography (GC)-Mass Spectrometry (MS) profiles and insecticidal activity of essential oils (EOs) from Thymus vulgaris (Thyme) and Cymbopogon citratus (Lemongrass) against the invasive and devastating pest, Tuta absoluta (T. absoluta) through contact and fumigation routes. We found out that thyme oil was predominantly constituted of Thymol (22.16%), α-Pinene (15.35%) and p-Cymene (13.54%) whilst Neral (21.41%), Geranial (21.36%) and β-Myrcene (9.74%) were the major constituents of lemongrass oil. Lemongrass oil exhibited higher insecticidal efficiency irrespective of application mode with 50% lethal dose (LD50) values of 35.8 and 72.2 µL.L-1air on contact and fumigation routes, respectively. Lemongrass oil also lengthened pupal duration at all tested doses irrespective of application routes. The overall responses of Lemongrass oil surpassed that of the reference insecticide (Lynx®: Lambda-cyhalothrine; Acetamipride). Thus, the recorded data clearly showed the acute and long-term insecticidal effects of the studied EOs, though a greenhouse and open field trials are required prior to the validation of this approach as remediation measure for Integrated Pest Management (IPM) for tomato borer control in Cameroon and elsewhere.

Samples of sunflower Waste Cooking Oils (WCOs) subjected to several cycles of frying were treated with water under four different combinations of temperature and pH. The variation of the chemical composition of the oil samples was monitored through headspace Solid-Phase Microextraction (HS-SPME) coupled with gas-chromatographic technique (GC), ¹H NMR spectroscopy and ESI⁺ mass spectrometry measurements. The possibility to modify the chemical composition of the recycled vegetable oil by tuning the water treatment parameters was exploited for the designing of a mini-plant for the production of bio-lubricants. A full description of the proposed prototype is also reported.

Trailing oil is the tail section of contamination. There are two main reasons for the formation of trailing oil, one is the effect of laminar flow boundary layer, the other is the outflow of the preceding batch remained in the dead-legs. In the batch transportation of refined oil, under the action of viscous force, the preceding batch forms laminar boundary layer near the pipe wall and stays on the pipe wall, resulting in the phenomenon of contamination trailing and formation of trailing oil. When oil passes through the valve chamber of the oil transportation station, dead-leg will be formed. Due to gravity and convection diffusion, preceding batch flowing from dead-legs will form trailing oil in the pipeline. The phenomenon of trailing oil exists in the process of batch transportation, which will have an effect on the quality of oil. In this paper, Reynolds time-averaged method is used to simulate turbulence.Computational Fluid Dynamics(CFD) software is used to simulate different flow rates and bypass lengths to obtain contamination-related experimental data.Matlab software is used to perform multi-nonlinear regression for the oil substitution time, the length of the bypass and the flow rate. The formula for calculating the length of the trailing oil produced by the dead-leg is obtained. The modified formula for calculating the length of the contamination is obtained by combining the existing formula for calculating the length of the contamination.

Carboxylic acids such as acetic acid and propionic acid have been investigated as representative components for fast pyrolysis (FP) bio-oil upgrading. Selective catalytic conversion of carboxylic acids can enhance bio-refinery processing economics through catalyst preservation and process intensification. Various metal-doped molybdenum carbide bead catalysts have been synthesized and developed in this work. Our aim is to enable selective conversion of carboxylic acids. In the case of acetic acid conversion, calcium doped Mo₂C beads offer the highest yield of acetone ~96% at 450 °C among undoped and Ca or Ni doped catalysts. By comparing hot gas filter with and without Ca-Mo₂C catalyst tested with real FP vapors, the former showed a 36.7% reduction of acetic acid, a 37.5% reduction of small ketones in aqueous phase, and a ~50% reduction of methoxies (methoxy phenols and methoxy aromatics) in organic phase. The conversion resulted in the formation of more long chain chemicals in the organic phase, which are more amendable for downstream upgrading.

In-situ injection of steam for heating of the subsurface is an efficient method for the recovery of oil and gas from oil shale where permeability typically evolves with temperature. We reported measurements on Jimusar oil shales(Xinjiang, China) at different temperatures to 600℃ and under recreated in situ triaxial stresses to obtain permeability evolution with temperature and stress. Permeability of tight oil shales evolves with temperature to a threshold temperature and peak temperature. The threshold temperature was subjected to triaxial stresses. For Jimusar oil shale, the threshold temperature ranges from 200℃ to 250℃ at ground stress of buried depth of 500m and from 350℃ to 400℃ at buried depth of 1000m. The peak temperature was almost not subjected to triaxial stress and the range is from 450℃ to 500℃ for all Jimusar samples. Pyrolysis plays an important role in permeability evolution and fundamentally changes permeability tendency and magnitude. At high temperature permeability exhibits a little reduction due to stress effect but still remains a high level due to pyrolysis. The above results show that oil shale mass can change from tight porous media into highly permeable media and oil & gas can easily flow through oil shale stratum.

Increase demand for palm oil production has indirectly increased waste and pollution. Empty fruit bunch (EFB), which is the major solid waste from this industry, has the potential to be further treated into valuable product. In this study, cellulose will be extracted from EFB through alkali treatment and acid hydrolysis treatment with a different approach and further modified via acetylation and silylation technique. The modified samples are to be utilized to reduce pollution due to palm oil mill effluent (POME) and carbon dioxide (CO2) emission from the industry. The characterization of the extracted and modified cellulose was carried out using attenuated total reflectance-Fourier transform infrared (ATR-FTIR), thermogravimetric analysis (TGA) and scanning electron microscope (SEM). ATR-FTIR analysis revealed that the cellulose was successfully extracted from raw EFB and the cellulose-acetyl, nanocrystalline cellulose (NCC) and cellulose-2 has been successfully modified from the cellulose. TGA analysis shows that both modified cellulose have higher thermal stability compared to raw EFB and extracted cellulose. SEM morphology of the modified cellulose shows a higher surface area due to the wrinkled formation while the wax layer and cuticle pore has been diminished clearly. The modified sample gave a significant performance where cellulose-acetyl absorbed 98.5% of oil compared to unmodified cellulose-1 sample that only absorbed 5% of oil from POME. NCC-AEAPDMS adsorbed physically and chemically 3.5 cm3/g CO2 gas compared to NCC sample, which undergoes only physical adsorption with maximum capacity up to 2.4 cm3/g. Thus, modification can enhanced the performance of cellulose for industrial applications.

The application of nanotechnology to the petroleum industry has sparked recent interest to increase oil recovery while reducing environmental impact. Nanocellulose is an emerging nanoparticle that is derived from trees and may provide an environmentally friendly alternative to current enhanced oil recovery (EOR) technologies. However, before nanocellulose can be applied as an EOR technique, further understanding of its transport behavior and retention in porous media is required. The research documented in this paper examines retention mechanisms that occur during nanocellulose transport. In a series of experiments, nanocellulose particles dispersed in brine were injected into sandpacks and Berea sandstone cores. The resulting retention and permeability reduction were measured. The experimental parameters that were varied include sand grain size, nanocellulose type, salinity, and flow rate. Under low salinity conditions, the dominant retention mechanism was adsorption and when salinity was increased, the dominant retention mechanism shifted towards log-jamming. Retention and permeability reduction increased as grain size decreased, which results from increased straining of nanocellulose aggregates. In addition, each type of nanocellulose was found to have significantly different transport properties. The experiments with Berea sandstone cores indicate that some pore volume was inaccessible to the nanocellulose. As a general trend, the larger the size of aggregates in bulk solution, the greater the observed retention and permeability reduction. Salinity was found to be the most important parameter affecting transport. Increased salinity caused additional aggregation, which led to increased straining and filter cake formation. Higher flow rates were found to reduce retention and permeability reduction. Increased velocity was accompanied by an increase in shear which is believed to promote breakdown of nanocellulose aggregates.

Malaysia generates significant quantities of lignocellulosic wastes through the production of crude palm oil (CPO). Over the years, the accumulation of the oil palm wastes (OPW) have become an environmental burden. These problems can be addressed by pretreatment and valorisation of OPW in bioenergy as envisioned in the National Biomass Strategy (NBS-2020). However, current strategies for the OPW valorisation are inefficient and unsustainable resulting in increased environmental challenges. Therefore, this paper proposes the pelletization and torrefaction of oil palm empty fruit bunches (OPEFB). Furthermore, the thermal degradation behaviour and potential product yields from OPEFB pellet torrefaction will be examined. The results revealed that the mass yield (M_Y) decreased from 67.89% to 33.11%, whereas energy yield (E_Y) decreased from 88.29% to 49.18% as the torrefaction temperature increased from 250 °C to 350 °C. However, the energy density (D_E) increased from 1.30 to 1.49 due to the increase in higher heating value (HHV) from 22.85 MJ/kg to 26.10 MJ/kg. Likewise, the severity factor (S_F) increased from 5.89 to 8.84 with increasing torrefaction temperature. The results also revealed that effect of temperature on the torrefaction parameters; M_Y, E_Y, D_E, and HHV are slightly reduced after 300 °C. Overall, the findings demonstrate that torrefaction improved the fuel properties and energy recovery potential of the OPEFB pellets.

Regular regimes of oil and oil products pipelines are studied. The problem is to develop an algorithm of effective pipeline system control that ensures the fulfillment of specified boundary conditions at the system boundaries. The product is pumped in batches, the flow is characterized by a change in temperature and pressure flow parameters over time. The developed solution method uses the principle of decomposition in the sense that each computational iteration is im-plemented in 3 stages, in three nested loops. The inner cycle is connected with the material bal-ance relations, at the next cycle the flow equations are introduced and the fulfillment of the 2nd Kirchhoff's law is monitored. If the flow process is significantly affected by temperature, then an external cycle is also implemented, correcting the solution so that the energy conservation equa-tion is satisfied. In the calculation procedure, some computational difficulties may arise, which consist in choosing an appropriate optimization method. On a specific example, the possibility of using various library programs to solve the problem was checked. The developed method is suita-ble for the analysis of systems of arbitrary topology. Since the method is not time-consuming, it can be recommended for online control of oil and oil products supply systems. The paper opens a new direction in the theory of hydraulic circuits. It uses both traditional methods of continuum mechanics and stochastic models.

The study was aimed at examining the status of research productivity and exploring the factors behind the identified status in Ethiopian universities from SDT and RBVT perspectives. In phase I, a null hypothesis was tested using a one-sample t-test at 0.05 alphas while in phase II one RQ was solved using qualitative analysis. The sample involved 531 academics, of whom 13 were interviewed. The mixed-methods research approach and explanatory sequential design guided this research. The status of research project production, indexed publication, and conference presentation performances in Ethiopian universities demonstrated statistically significant mean differences below the institutional, national, and world average cut-off points (performing at least one research project, one indexed journal, and one conference paper presentation per year per academic staff). Furthermore, we explored scarcity of funds, low research capacity, weak research culture, lack of productive institutional leadership, and political instability in the country as major causes of the low research productivity status. The researchers felt that the study would contribute to both promoting academic staff's research productivity and enriching the higher education research literature. MOE, university presidents, and deans should intervene in causes to improve academics’ research productivity status towards the desired local and global standards.

This comprehensive review delves into the contemporary landscape of gas flotation in the oil and gas sector, shedding light on the evolving demands for increased separation efficiency within the industry. The oil and gas sector is now placing a premium on enhanced separation efficiency, surpassing the conventional methods currently deployed. A critical exploration of the underlying principles governing the design of high-efficiency gas flotation systems is also a focal point of this review. Gas flotation, a pivotal technology within the oil and gas industry, has witnessed a significant evolution in response to the escalating need for improved separation efficiency. This heightened demand for efficiency stems from the industry's commitment to maximizing resource recovery, minimizing environmental impact, and optimizing operational costs. As the industry continues to evolve, there is a growing recognition of the imperative to surpass existing standards and push the boundaries of gas flotation technology. The review delves into the core principles that underpin the design of high-efficiency gas flotation systems, emphasizing the need for innovative approaches to meet the industry's escalating demands. By scrutinizing the major design principles, researchers aim to uncover novel strategies that can revolutionize gas flotation processes, paving the way for higher performance and enhanced operational outcomes. Exploring the intricate balance between operational efficiency, environmental sustainability, and cost-effectiveness, this review serves as a roadmap for industry stakeholders seeking to navigate the shifting landscape of gas flotation technology. By synthesizing the latest advancements and industry trends, the review aims to catalyze discussions and drive innovation in the realm of high-efficiency gas flotation within the oil and gas sector.This comprehensive review further illustrates how the manipulation of gas bubble size and the intricate fluid dynamics within separation vessels serve as pivotal mechanisms for augmenting oil removal efficiency within the industry. By delving into these fundamental aspects, the review elucidates how precise control over gas bubble size and a deep understanding of fluid dynamics play a central role in enhancing the effectiveness of oil removal processes. The review goes beyond theoretical discussions to showcase real-world applications of this cutting-edge gas flotation technology within the oil and gas sector. By highlighting examples of this new generation of gas flotation technology, the review offers tangible insights into how industry players are harnessing innovative approaches to optimize oil removal efficiency. These case studies and examples serve as practical illustrations of the transformative potential of leveraging advanced gas flotation techniques to achieve higher separation efficiency and operational excellence. Through a blend of theoretical underpinnings and practical demonstrations, this review bridges the gap between theory and application, providing a holistic view of the transformative impact of gas bubble size control and fluid dynamics optimization on oil removal efficiency. By showcasing how these fundamental mechanisms translate into tangible operational improvements, the review empowers industry professionals to embrace and implement the latest advancements in gas flotation technology for enhanced oil removal performance. In essence, this review not only underscores the critical roles of gas bubble size control and fluid dynamics in boosting oil removal efficiency but also offers concrete examples of how these principles are being leveraged in practice. By showcasing the innovative strides made in the realm of gas flotation technology, the review paves the way for industry stakeholders to embrace a new era of efficiency, sustainability, and performance excellence in oil and gas separation processes.

The opportunities and advantages of implementing Artificial Intelligence (AI) and Machine Learning (ML) to optimize the process control of wastewater treatment in the Oil and Gas industry are discussed in this work. Discussion is centered around five major points: 1) Various types of Oil and Gas wastewater (Sour, Oily, Produced) and industry standards/methods for treatment, including specific case studies and challenges when treating certain wastewater. This section aims at the common types of wastewater in the Oil and Gas industry and how they are generally treated. 2) How AI/ML has been implemented in wastewater treatment in various industries; summary of which AI/ML languages were used along with a brief overview of how they work. This article focused on an understanding of the specific case studies and AI explanations to understand the effectiveness of wastewater treatment using AI/ML. 3) AI that is currently implemented in Oil and Gas such as personal protective equipment (PPE), smartwatches radiofrequency identification etc. This showed that AI/ML already plays a successful role in the Oil and Gas industry and has proven to help optimize many processes and components. Many of these AI/ML implementations are now industry standards and have greatly benefitted the industry. This section demonstrates that the implementation and the use of AI/ML have been proven to be a successful endeavor and that expanding the role of AI/ML would be beneficial. 5) Using the established points from the previous sections the paper outlines why AI/ML is ideal for Oil and Gas wastewater treatment; this argument centers around fit-for-purpose treatment, and the possible uses of the treated water. A determination of the best-suited AI languages, possible implementation scenarios, and how this would shift the way Oil and Gas industries treat and approach wastewater is presented to the reader.

Improper disposal of waste plastic has caused serious ecological and environmental pollution problems. Transforming plastics into high value-added chemicals can not only achieve efficient recycling of waste plastics, but also an effective way to control white pollution. The catalyst selectively breaks the C-C bond of polyolefin plastic under heat treatment and converts it into liquid fuel, thus realizing sustainable recycling of plastics and has a good development prospect. This review provides a detailed overview of the current development of catalytic pyrolysis, catalytic hydrolysis, solvent decomposition and supercritical hydrothermal liquefaction for cracking plastics to make fuel oil. The reaction mechanism, influencing factors and promoting effects of catalysts in various degradation technologies are analyzed and summarized and the latest proposed tandem reaction for degrading plastics is briefly introduced. Finally, some optimization paths of waste plastic pyrolysis to fuel oil technology are proposed: synergies between mixed raw materials, in-depth exploration of catalysts, design and manufacture of reactors that match the pyrolysis technology. All these are important research directions for promoting the industrialization of plastic pyrolysis to fuel oil.

Hybrid reinforcement in a composite material (CM), in many situations, allows better govern material mechanical properties. Polymer matrix CM plate is reinforced with small particles and macro-fibers. Particles are oil shale ash (OSA) powder, macro-fibers – basalt fiber threads im-pregnated by matrix material. With the goal to find out elastic properties of the matrix- polymer with OSA, samples with its different concentrations were experimentally fabricated and their elastic properties were experimentally measured. Obtained data were used in numerical model-ling. Was observed polymer matrix composite slab, reinforced with OSA and three-dimensional (3D) basalt fiber fabric. Fabric are forming threads impregnated by matrix (polymer resin mixed with OSA particles). Damage accumulation in the stretched slab was modelled. Impregnated thread, in the modelling, is observed as a macro-fiber (MF) with averaged elastic properties. With the load increase MF in the material began to break. At first, appeared isolated single breaks. A probabilistic sequential MF rupture accumulation model was accepted and numerical-ly realized. The geometry of the reinforcing knitted fabric was modeled using the Leaf and Glaskin approach. In the knitted fabric highly, stressed MF cross-sections are observed as po-tential location where thread breakage can occur. If one thread breaks, the cross-sections of the adjacent threads experience the overload caused by this rupture. More overloaded crossection in the adjacent overloaded thread breaks and we obtain two adjacent broken MF designated as a defect with the size j=2. The probabilities of obtaining defect consisting of at least 2, 3, … j adjacent broken MF in the plate were calculated. The calculations continued until the rupture process becomes unstable (j→∞). The overstresses on adjacent threads in the CM were calculat-ed using the FEM three-dimensional numerical approach. Analytical and stochastic methods were used for the load-carrying capacity determination and different size defects accumulation in the hybrid composite material (HCM) plate. Also, was calculated the probability of the plate rupture.

The leaf essential oils from five Eucalyptus spp.: E. astringens, E. camaldulensis, E. lehmanii, E. leucoxylon and E. sideroxylon growing in the same plantation area and conditions (plants with the same age and subjected to the same agronomic practices) were analyzed and evaluated for their antimicrobial activity. The essential oil yields ranged from 0.14 to 0.96% (w/w), and their chromatographic profiles were resolved into 48 compounds; among them, 11 were common to all essential oils. Terpenoids (oxygenated mono, and sesquiterpenes) dominated (55.66-76.67%) the oil profiles. Although 1,8-cineole (21.97-50.93%) was found as the main oxygenated monoterpene in all examined essential oils, principal component analysis observed and confirmed an interspecific chemical variability. Additionally, a set of distinctive chemical markers that could serve as a reliable tool for discrimination of Eucalyptus species and for authentication and quality control purposes (for commercial samples) has been defined for each essential oil. The antimicrobial disc-diffusion assay results revealed that all essential oils were endowed with a strong antimicrobial activity, with those derived from E. camaldulensis, E. lehmanii and E. leucoxylon being the most active.

Irrigation is crucial in cleaning and disinfection of the root canal system, because endodontic instruments are unable to reach a large part of the root canal system (isthmuses, accessory canals, apical ramifications) and bacteria that can reside. Sodium hypochlorite (NaOCl) is currently used as irrigant in root canal therapies for its non-specific protheolytic and antimicrobial properties, but undesirable effects may be observed especially when used near the terminus of apical foramen. This study aims to evaluate antimicrobial properties of Thyme Essential Oil (TEO) used alone or in combination with NaOCl against different bacterial strains, especially Staphylococcus aureus and Streptococcus mutans. TEO non-cytotoxic concentration (9,28mg/mL) showed antimicrobial properties comparable to NaOCl after 1min of contact, both in presence of organic material (6% sheep blood). Moreover, the combination of TEO and NaOCl did not compromise their individual antimicrobial properties at the same time of contact. These data suggest that TEO could be used as antimicrobial irrigant in root canal therapies in association with NaOCl, to reduce concentration of NaOCl and its undesirable side effects. Due to the absence of cytotoxic effects at tested dilution, TEO could be safely used also near the terminus of apical foramen for its cytocompatibility.

Biomass as a whole offers a more diverse potential for valorisation than any other renew-able energy source. As one of the stages in the separation of bio-oil involves the liquid mixture of acetol and acetic acid, and as both components are particularly well suited for valorisation, a hybrid method has been developed for their separation with a high purity level through an approach combining liquid-liquid extraction and rectification. In order to design and simulate the flowsheet, the ChemCAD 7.0 simulation software has been used. Sensitive analyses have been carried out to investigate the influence of the different pa-rameters in the rectification columns such as the reflux ratio, the feed stage location, and the vapour/bottom molar flow ratio. The effect of different extractants and of their excess on the separation process as well as the possibility of regenerating the extractant has also been studied. Tri-n-octylamine has accordingly been selected as a separating agent which has been fully recycled. The end result for separating an initial 48/52 wt% ace-tol/acetic-acid liquid mixture has been acetol with a purity of 99.4 wt% and acetic acid with a purity of 100 wt%.

Seven pieces of Lacquer Lian from Warring States Period to Yuan Dynasty (475 BC- 1368 AD) were analyzed by means of cross-section observation, Raman spectroscopy (RS) and thermally assisted hydrolysis and methylation pyrolysis coupled with gas chromatography/ mass spectroscopy (Py-GC/MS). The results demonstrated that Lacquer Lian was consisted by three layers, including pigment layer in the surface, undercoat layer in the middle and ground layer, the red mineral pigment was cinnabar, and mixture of Chinese lacquer and drying oil was applied as main organic materials. Although lacquering techniques had undergone minimal changes from Warring States Period to Yuan Dynasty, the species of drying oil had changed based on the fact that boiled tung oil was found in the ground layer of lacquerwares from Song Dynasty and Yuan Dynasty. The present research provided direct evidence for the inheritance and development of Chinese lacquer technology.

This paper presents the results of investigations on the pyrolysis of tyres waste in a laboratory fixed bed batch reactor. The results regarding the influence of either the reaction temperature (425, 450, 475, and 500 °C) and the flow of the inert gas (0, 100, 300, and 500 mL/min) on products yield (referred to pyrolysis of waste tyres) are also considered and discussed. On the basis of the above mentioned findings, the most appropriate experimental conditions were selected to contribute to a higher yield of pyrolysis oil. The sample of pyrolysis oil obtained from the experiments carried out in the selected optimal conditions (reaction time 120 min, temperature 450 °C and the inert gas flow of 100 mL/min) was subjected to a calorimetric and infrared spectroscopy analysis. The results of IR spectroscopy analysis on this oil sample showed the following content in percentages (by mass): 32.59 % of aromatics, 51.06 % of paraffins and 16.35 % of naphthenes. The pyrolysis oil so obtained has a high calorific value (42 MJ/kg) and a low sulfur content (0.41 % by mass), which makes it an excellent raw material for energy production. The solid product, i.e. pyrolysis char or carbon black, has the potential to be used as an adsorbent or catalyst support after an activation process, which changes its irregular pore structure to a more voluminous one, making the overall structure more crystalline and symmetrical. Pyrolysis coal has a fairly high calorific value of 31 MJ/kg, when compared to typical solid fuels, so it can be used in energy production or as a feedstock for the gasification process.