The metastasis of lung cancer can spread to the lymph nodes around the lungs. Metastasis, rather than the primary cancer, judges patients survival. Wherefore, a more detailed study on transcriptome of metastatic lung adenocarcinoma including primary carcinoma was carried out. LUAD RNA-seq data and the corresponding clinical information were available from The Cancer Genome Atlas (TCGA), which included 522 cases but only 515 cases have transcriptome data. Differential expression analyses between cases and controls, between primary cancer and metastasis subgroup, or between TNM stages, were respectively carried out using edgeR package. Then, the Kruskal-Wallis tests were used to verify the gradient changes of cancer metastasis or staging with the differential expression genes. The survival analyses were calculated using the Kaplan-Meier algorithm and log-rank test. The functional predictions for the differentially expressed genes were porformed with the Gene Ontology and Kyoto Encyclopedia of Genes and Genomes (GO/KEGG). Single gene set enrichment analysis (single GSEA) was run to explore the biological pathways associated with the expressions of RN7SL494P gene based on the Molecular Signatures Database (MSigDB). 406 and 439 differentially expressed genes were identified respectively in lymph node metastasis or TNM stages. 112/296 intersection genes were associated with nodal metastasis and/or staging, among them only 25 genes were associated with the nodal metastasis, 13 genes were associated with the staging with gradient changes. Only one gene (RN7SL494P) was found to be associated with prognosis. But RN7SL494P was not found joining any biological functions or processes or cellular components with GO/KEGG analyses. Finally, single GSEA enrichment and pathway analyses showed that RN7SL494P might be involving in cancer development process and poor outcome in lung adenocarcinoma. These findings highlight the potential applications of RN7SL494P as a promising molecular predictor not only in nodal metastasis but prognosis evalution in lung adenocarcinoma patients.

In general sound waves propagate radially outwards from a point source. These waves will continue in the same direction, decreasing in intensity, unless a boundary condition is met. To arrive at a universal understanding of the relation between frequency and wave propagation within spatial boundaries, an analysis and comparison is made between the results of Chladni plate experiments and Chladni plate simulations. We consider a finite range of frequencies and plate geometries and present a model that has been shown to successfully recreate the nodal line patterns to a first approximation. We discuss the benefits of such a model and the future work necessary to develop the model to its full predictive capacity.

Well deliverability optimization is essential for oil and gas production and nodal analysis is a common tool used for selecting suitable production parameters. To accurately calculate upstream and downstream pressures at various production rates at a certain selected node, proper modeling of multiphase flow in wellbores is necessary. However, this process is complex due to the inconsistent velocities of the fluids (i.e., oil, gas, and water) and the interaction between the liquids under high temperature and pressure. Empirical models, such as Hagedorn and Brown (1965), Beggs and Brill (1973), and Mukherjee and Brill (1983 and 1985), and the drift-flux model (Zuber 1965) are commonly used for multiphase flow calculations in wellbores. In this paper, we programmed and evaluated three multiphase flow models (Hagedorn-Brown, Mukherjee-Brill, and drift-flux) using Matlab. The programming includes holdup calculation, pressure gradient calculation, pressure traverse calculation, inflow curve determination, inflow performance relationship (IPR) curve determination, and well deliverability determination. Additionally, we conducted a case study to examine the sensitivity of parameters and compare and analyze the results of pressure traverse, tubing intake curve, and deliverability determination between the drift-flux and Mukherjee-Brill models. Sensitivity analysis was conducted on two of the seven parameters in the drift-flux model, and the effects of production and reservoir parameters on well deliverability were analyzed. The case study results indicated that the Mukherjee-Brill model predicted slightly higher bottomhole pressure compared to the drift-flux model at a fixed oil flow rate, but its well deliverability determination was lower. Furthermore, the drift-flux model showed that the pressure increased with an increase in the distribution coefficient for bubble flow (C0_bubble), while the beta parameter had little impact on the calculated pressure in the studied range. The well deliverability increased when the tubing size and reservoir pressure increased, or the tubing head pressure decreased.

The Simplified Spherical Harmonic (SPN) approximation was first introduced as a three-dimensional (3-D) extension of the plane-geometry Spherical Harmonic (PN) equations. A third order SPN (SP3) solver, recently implemented in the Nodal Expansion Method (NEM), has shown promising performance in the reactor core neutronics simulations. This work is focused on the development and implementation of the transport corrected interface and boundary conditions in NEM SP3 solver, following recent published work on the rigorous SPN theory for piecewise homogeneous regions. A streamlined procedure has been developed to generate the flux zero and second order/moment discontinuity factors (DFs) of the generalized equivalence theory to eliminate the error introduced by pin-wise homogenization. Moreover, several color set models with varying size and configuration are later explored for their capability of generating DFs that can produce results equivalent to that using the whole-core homogenization model for more practical implementations. The new developments are tested and demonstrated on the C5G7 benchmark. The results show that the transport corrected SP3 solver shows general improvements to power distribution prediction compared to the basic SP3 solver with no DFs or only zero order/moment DFs. The complete equivalent calculations using the DFs can almost reproduce transport solutions with high accuracy. The use of equivalent parameters from larger size color set models show better prediction in the whole-core calculations. By coupling different color set models DFs can offer the best accuracy at both eigenvalues and power distributions.

We investigate a single-particle density of states in the three-dimensional system described by effective two-band Hamiltonian which describes a ground state in two distant electronic phases: the semimetalic nodal-loop phase and the insulating gapped phase. Analysis of valence bands and Fermi surfaces in both phases indicates that the density of states crucially depends on the parameter in the Hamiltonian of the system that controls a topological alternation of the Fermi surface. The signature of that alternation is expected to play an important role in all quantities closely related to the density of electronic states, such as charge transport and optical conductivity of the system for example.

Rooftop solar (RTS) projects have the potential to contribute to climate change mitigation and sustainable development objectives. In India, grid-connected RTS capacity has been targeted at 40 GW by the end of the year 2022 however, the installed capacity is limited to 8.2 GW only. As a result, the country missed its 2022 target of installing 100 GW of solar power capacity, largely due to inadequate uptake of RTS. The prevailing practices of RTS implementation is observed to be complex, repetitive, tedious, and time-consuming for potential consumers and there is a lack of coordination among implementing agencies. Therefore, even with vast potential, supportive measures, dedicated policies, and regulations the penetration of RTS systems is far below their respective potential. The introduction of information technology (IT) intervention in the RTS sector would integrate key stakeholders at a single platform so as to reduce the administrative burden of implementing agencies, optimization of processing time, handle multiple consumers simultaneously, and connect consumers with authentic vendors, etc. This would help them to understand and perform their shared roles and responsibilities and enhance the RTS implementation across the state. In this study, the scope for IT interventions in the existing RTS implementation process of the Odisha Renewable Energy Development Agency (OREDA) has been assessed and a simplistic approach has been developed for the execution of the RTS projects in relatively lesser time with the least human interface as well as resources. This approach has been successfully demonstrated with OREDA and a cumulative capacity of around 5 MWp (individual project of 1-2 kWp) residential grid-connected RTS projects implemented through the web platform. Currently, other state nodal agencies are also adopting the model for RTS execution and consumer proliferation through IT interventions.

The variable-length arbitrary Lagrange-Euler (ALE)-ANCF finite element, which employ nonrational interpolating polynomials, cannot exactly describe the rational cubic Bezier curves such as conic and circular curves. The rational absolute nodal coordinate formulation (RANCF) finite element, whose reference length (undeformed length) is constant, can exactly represent the rational cubic Bezier curves. A new variable-length finite element called the ALE-RANCF finite element, which is capable of accurately describe the rational cubic Bezier curves, is proposed by combining the desirable features of the ALE-ANCF and RANCF finite element. In order to control the reference length of ALE-RANCF element within a suitable range, element segmentation and merging schemes are proposed. It is demonstrated that exact geometry and mechanic is maintained after the ALE-RANCF element is divided into two shorter ones, and compared with the ALE-ANCF elements, there are smaller deviations and oscillations after two ALE-RANCF elements are merged into a longer one. Numerical examples are presented and the feasibility and advantages of the ALE-RANCF finite element are demonstrated.

The aim of the study is to evaluate the predictive factors of response to induction chemotherapy in patients with resectable NSCLC, treated at the unit of Thoracic Surgery of Siena University Hospital with radical surgery. From January 1, 2013 to December 31, 2020, 78 patients were recruited. We analyzed the outcomes in terms of 5-years OS based on the Estimated Regression Rate, N2 downstaging and age; two patients’ subgroups were created by age (Group A: age <66 years-old; Group B: age >66 years-old). No 5-year OS difference was observed based on age, while it was observed in patients with N2 downstaging (p=0.031). Bewtween patients with N2 downstaging, only patients in Group A had a significantly increased 5-year OS (p=0.019), while this was not observed in Group B (p=0-321); the same result was observed with the Estimated Regression Rate > 50% (Group A p=0.005; Group B p=0.391). The percentage of disease regression and the N2 down-staging after induction chemotherapy have great value on the survival, although this advantage seems to be observed mostly in younger patients. A multidisciplinary oncologic discussion of clinical cases could provide support in the careful selection of the ideal patients to undergo neoadjuvant treatment before radical surgery.

In plants, water flows are the major driving force behind the growth and play a crucial role in the life cycle. To study hydrodynamics, methods based on tracking small particles inside water flows occupy a special place. Due to these tools, it is possible to get information about the dynamics of the spatial distribution of the fluxes characteristics. In this paper, using contrast-enhanced MRI, we have shown that gadolinium chelate, used as an MRI contrast agent, marks the structural characteristics of xylem bundles of maize stem nodes and internodes. Supplementing MRI data, a high-precision visualization of xylem vessels by laser scanning microscopy was used to reveal structural and dimensional characteristics of the stem vascular system. In addition, we proposed the concept of using the prototype "Y-type xylem vascular bundles" as a model of the elementary connection of vessels within the vascular system. A Reynolds number can match the microchannel model with the real xylem vessels.

Background: Nodal peripheral T-cell lymphomas (nPTCLs) encompass a heterogeneous group of mature and aggressive lymphoid malignancies, including peripheral T-cell lymphoma, not otherwise specified (PTCL/NOS), angioimmunoblastic T-cell lymphoma (AITL) and anaplastic large cell lymphoma (ALCL) ALK-positive and ALK-negative. Their differential diagnosis and prognosis are an issue in the clinical practice. Accurate biomarkers to refine the different subtypes of nPTCLs and to stratify their prognosis are essential to improve their treatment approach. The aim of this study was to test the prognostic impact of GATA3 gene expression, and its capability to discriminate the different subtypes of nPTCLs. Patients and Methods: From 2000 to 2017, 80 patients with nPTCLs were eligible for GATA3 gene expression analysis that was assessed retrospectively by quantitative real time PCR (qRT-PCR) of neoplastic biopsies in Formalin-Fixed Paraffin-Embedded samples (FFPE). Results: Median age was 49 years old (IqR 34-59), 43/80 (53.7%) were male. Median follow-up was 1.72 years. Of them, 36.3% were classified as PTCL/NOS, 31.2% ALK-negative ALCL, 21.2% ALK-positive ALCL and 11.3% AITL. The majority of cases had advanced stage (III/IV). Two-year estimated overall survival (OS) and progression-free survival (PFS) were 52.2% and 39.5%, respectively. The median GATA3 gene expression level was 0.49% (range 0 – 7.07) in all cohort, it was 0.11% for ALK-positive ALCL, 0.46% for ALK-negative ALCL, 0.86% for PTCL/NOS and 0.67% for AITL. The difference of GATA3 gene expression among distinct variants of nPTCLs was statistically significant (p < 0.001). GATA3 gene expression levels ≥ 0.71% discriminate PTCL/NOS from ALK-negative ALCL and AITL with sensitivity of 62% and specificity of 80.3%. GATA3 gene expression levels ≥ median was associated with poor 2-year OS for PTCL/NOS (46.7% x 21.4%, p=0.04) and for ALK-negative ALCL (85.7% x 54.5%, p=0.04). Conclusion: Despite the relative small and heterogeneous group of patients with nPTCLs, GATA3 gene overexpression may be an important biomarker associated with poor prognosis in PTCL/NOS and ALK-negative ALCL. Moreover it may also discriminate different subtypes of nPTCLs. Further studies with larger series of patients should confirm our findings.