The efficiency of cold sheet and strip rolling of steels and non-ferrous metals in the main depends on the quality of the technological lubricant and its cost. In this regard, it is important to develop new compositions of effective metal-working coolants (MWC) having low cost and providing the maximum reduction in the friction coefficient. We developed and tested the new compositions of the MWC on basis of chicken fat, and mono- and diglycerides and their esters of boric acid synthesized from the wastes of sunflower oil production. The MWC were tested in DSEA on laboratory rolling mill 100x100 with a roll diameter of 260 mm during steel 08Kp rolling. The efficiency of the coolants was determined by the factor of metal stretch forming λ and the coefficient of friction μ in the deformation zone which was found by forward slip method. We found the metal-working coolant with 100 % concentration of boric acid esters of mono- and diglycerides is the most effective in steel rolling. Thus the new MWC on basis of boric acid esters of mono- and diglycerides synthesized from the wastes of sunflower oil production can be recommended for use in rolling of structural steels on account of availability, high efficiency, and a low cost.

The efficiency of cold steel rolling depends mainly on the quality of the metal-working coolant (MWC) and its cost. In this connection, it is actual to search for new compositions of lubricants and emulsions, which provide the lowest values of the friction coefficients in deformation zone and are obtained by waste recycling in other industries. In this study we have developed new compositions of the MWC on basis of mono- and diglycerides and their esters of boric acid synthesized from the wastes of sunflower oil production. The new compositions of MWC were tested in DSEA on laboratory rolling mill 100x100 with a roll diameter of 100 mm. The efficiency of new MWC during cold rolling of brass L63 samples was determined by factor of metal stretch forming λ. We found the new metal-working coolants to show the most efficiency under higher cobbing that provides the highest metal stretch forming. The composition with 30 % of mono- and diglycerides is the most effective because it provides the minimum coefficient of friction that leads to increase of factor of metal stretch forming. Thereby the metal-working coolants on basis of mono- and diglycerides obtained from the wastes of sunflower oil production can be recommended for use in strip rolling of copper-zinc alloys because of a low cost, availability and high efficiency.

The recent green manufacturing demands have boosted the development of new biodegradable lubricants to replace petroleum-based lubricants. In this regard, water-based lubricants have been at the forefront of recent research for a wide range of industrial applications, including metalworking fluids (MWFs). In this work, we present an experimental investigation on the performance of novel green MWFs based on aqueous nopal mucilage solutions. For this, fully biodegradable solutions with different mucilage concentrations were evaluated in terms of rheological, tribological, thermal stability and turning (minimum quantity lubrication) performance, and compared to a commercial semisynthetic oil-based MWF (Cimstar 60). Mucilage solutions exhibited viscoelastic shear-thinning behavior, which was enhanced along with mucilage concentration. The solution with the highest mucilage content studied resulted in the lowest wear, friction and temperature in comparison to the other solutions and neat water in extreme pressure four-ball tests, and a similar level of lubricity as compared to the commercial MWF in cutting tests. This performance is associated to the enhanced viscosity and elasticity of the solution, as well as to the contents of lipids with fatty acids in the mucilage. Overall, the present results reveal the relevance of the viscoelastic behavior of the lubricant, elasticity in particular, in lubrication processes, and points to nopal mucilage as an effective green additive to produce innocuous MWFs.

Background: The rise of cloud computing has led to the increasing number of organizations that rely on it for various tasks and services, such as education, healthcare, and e-commerce. Unfortunately, many security threats can be caused by the sudden use of cloud platforms. Objective: This paper aims to provide a comprehensive overview of these threats and how they can be mitigated. Many companies are moving toward cloud computing to sustain their business growth and provide their employees with the best possible work environment. Results: Due to the rise of cyber security threats and the unprecedented number of breaches of data, small and medium-sized enterprises are also starting to take a huge leap. The outbreak of COVID-19 has affected the lives of people all around the world. Conclusion: Due to the seriousness of the situation, the WHO has declared the COVID-19 pandemic a public health emergency. To minimize the spread of the virus, the entire world has started adopting social distancing

Evidence-based canine decontamination protocols are underrepresented in the veterinary literature. Aerosolized microbiological and chemical contaminants can pose a risk in deployment environments highlighting the need for improved canine field decontamination strategies. Prior work has established the efficacy of traditional, water-intensive methods on contaminant removal from the coat of the working canine; however, it is not known if similar reductions can be achieved with simple field expedient methods when resources are limited. The objective of this study was to measure the reduction of aerosolized contamination via a practical “wipe-down” procedure performed on working canine coats contaminated with a fluorescent, non-toxic, water-based aerosol. Disposable, lint-free towels were saturated with one of three treatments: water, 2% chlorhexidine gluconate scrub (CHX), or 7.5% povidone-iodine scrub (PVD). Both CHX and PVD were diluted at a 1:4 ratio. Treatments were randomly assigned to one of three quadrants established across the shoulders and back of commonly utilized working dog breeds (Labrador retrievers, n = 16; German shepherds, n = 16). The fourth quadrant remained unwiped, serving as a control. Reduction in fluorescent marker contamination was measured and compared across all quadrants. PVD demonstrated greater marker reduction compared to CHX or water in both breeds (P < 0.0001). Reduction was similar between CHX or water in Labradors (P = 0.86) and shepherds (P = 0.06). Effective wipe-down strategies using common veterinary cleansers should be further investigated and incorporated into decontamination practices to safeguard working canine health and prevent cross-contamination of human personnel working with these animals.

Body temperature responses were recorded during phases of work (waiting to work in close proximity to search site, active work in a search site, and post-work recovery crated in vehicle) in human remains detection dogs during search training. State or federally certified human remains detection dogs (n = 8) completed eight iterations of searching, rotating through six different types of search environments to detect numerous scent sources including partial and complete, buried, hidden, or fully visible human remains. Internal temperature (Tgi) of the body was measured continuously using an ingestible thermistor in the gastrointestinal tract. Mean total phase times were: waiting to work: 9.17 minutes (± 2.27); active work: 8:58 minutes (± 2:49); and post work recovery: 24:04 minutes (± 10.59). Tgi was impacted by phase of work (P < 0.001) with a small increase during active work, with mean peak temperature 39.4 °C (± 0.34 ºC) during that period. Tgi continued to increase for a mean of 7:37 (± 6:04) minutes into the post-work recovery phase in the handler’s vehicle with a mean peak Tgi of 39.66 °C (± 0.41 ºC). No significant increase in temperature was measured during the waiting to work phase, suggesting anticipation of work did not appear to contribute to overall body temperature increase during the waiting to work recovery cycle. Continued increase of gastrointestinal body temperature several minutes after cessation of exercise indicates that risk of heat injury does not immediately stop when the dog stops exercising, although none of the dogs in this study reached clinically concerning body temperatures or displayed any behavioral signs suggestive of pending heat injury. More work is needed to better understand the impact of vehicle crating on post-work recovery temperatures in dogs.

Numerous studies have been conducted in past so as to understand whether the working capital management policies of an organisation affect its performance or not. Some studies have found a positive relationship between WCM and firm performance. However, other studies have found a negative impact of WCM on firm performance. Present research work is an endeavour in this direction to find out the working capital management policies and strategies of Indian cement companies and their performances. The study employs a quantitative approach to examine whether the Indian cement companies optimally use their working capital, which is analysed by establishing the relationship between the working capital management and profitability using 11-year (2010-2021) financial data of 31 cement companies listed in Bombay Stock Exchange (BSE). The findings of the random-effects model say that only ITP is significantly negatively related to the ROA of the cement companies at a 0.01 level of significance. Similarly, APP also negatively yet poorly predicts ROA at a 0.10 level of significance the firm’s profitability is not significantly affected by ARP and CCC. Also, it has been observed that the liquidity measures CR and QR have a significant positive association with ROA. Further, the size of the industries and leverage are inversely related to ROA but the age of the firm is not significantly predicting their financial performance.

Working farm dogs are essential to many livestock farmers. Little is known about factors that influence dogs’ risk of being lost from work. This paper explores risk factors for farm dogs being lost through death, euthanasia and retirement. All enrolled dogs were working and minimum 18 months old. Five data collection rounds were done over four years. Data about dogs were collected from owners and dogs were given physical examinations by veterinarians. Dogs that were lost from work were counted and owner-reported reasons for loss were recorded. Multivariable logistic regression modelling was used to investigate risk factors for loss. Of 589 dogs, 81 were lost from work. Of these, 59 dogs died or were euthanized and 22 were retired. Farm dogs tended to reach high ages, with 38% being 10 years or older when last examined. Acute injury or illness was the most commonly owner-reported reason for loss. Age group (P &lt; 0.0001) and lameness (P = 0.04, OR = 1.8) significantly affected dogs’ risk being lost. These results expand our knowledge about factors that affect health, welfare and work in farm dogs. Further investigation into reasons for lameness may help improve health and welfare in working farm dogs.

Inorganic chemistry has contributed to the progress of human civilization in several different ways. Its activities at the interface with other scientific disciplines has led to emergence of several new fields like organometallic chemistry, bio-inorganic chemistry, solid-state chemistry, environmental chemistry, etc. In the past few decades, it has made inroads in yet another dimension of immense relevance, i.e. nano-science and –technology. In this assay an attempt has been made to present an overview of utility of inorganic and organometallic compounds as precursors for the synthesis of nano-materials with reference to catalysis and materials science. Applications of metal nanoparticles (NPs) and metal chalcogenide NPs, generated through molecular precursor route, in catalysis have been discussed. Synthesis of ternary and quaternary metal chalcogenide nano-materials by molecular precursor route has been reviewed.

Background: Exclusive breastfeeding (EBF) for the first 6 months of life improves the growth, health and survival status of newborns. Breastfeeding has been accepted as the most vital intervention for reducing infant mortality and ensuring optimal growth and development of children. Objectives: The general objective was to identify the factors affecting exclusive breastfeeding among working class women in selected wards in Egbedore Local Government in Osun state, Nigeria. Methodology: This was descriptive cross-sectional study. Leslie Kish formula was used for sample size calculation and multistage sampling was used in selecting 316 working class women for the study. A structured, self-administered questionnaire was used for data collection. Data was analyzed using SPSS version 21.0 and level of significance was set at 5%. Results: 58% of the respondents were between the ages of 25-30. 72% demonstrated good understanding of exclusive breastfeeding based on the 6 months WHO recommendation for exclusive breast feeding, 25.9% had a fair knowledge and awareness of exclusive breastfeeding. 63.3% of the working class mother has a good practice of exclusive breast feeding, 19.6% of the women moderately practices exclusive breastfeeding while 17.1% poorly practices exclusive breastfeeding. Less than 3-months maternity leave for mothers, lack of crèche closer to place of work and lack of breastfeeding break were identified as barriers to exclusive breastfeeding practices among the working class women. The findings demonstrated a significant relationship between knowledge and practices of exclusively breastfeeding among working class women (P-value .009). Conclusion: This study demonstrated that working class women had good knowledge of exclusive breastfeeding and this influenced their breastfeeding practices. A good knowledge was associated with favorable attitudes to the practice of exclusive breast feeding. To derive long-term benefits from early childhood nutrition, interventions should focus on health education and community-based sensitization programs on the needs for mothers to engage in exclusive breast needing for global development.

In this article, metallic additive manufacturing (AM) processes were classified and demonstrated. AM technology can be applied to a wide range of industrial areas because of its great feasibility in the design and manufacturing of various complex parts. The main factor that distinguishes various metallic AM processes from each other is the deposition method. Deposited metal can be imported in the form of melt or semi-solid. AM technology also covers a wide range of materials like aluminum, titanium, and many other alloys. Some of the common applications of metallic AM processes are the quick manufacturing of the parts which utilized in various industries like medical, automotive, aerospace, and jewelry industries. AM can help to fabricate parts that are impossible to be manufactured by other processes.

Children with hearing loss have been found to have significantly more behavioral and emotional challenges than their typically hearing peers, though these outcomes are variable at the individual level. Working memory deficits have been found to relate to executive functioning and overall emotion regulation, leading to behavior challenges. Language development is essential for development of social relationships and communicating one’s needs - this may lead to distress when children cannot communicate effectively. Based on prior findings in children with hearing loss and their typically hearing peers, working memory and language skills were hypothesized to be related to parent and teacher report of socioemotional functioning. Participants were 35 children with hearing loss (66% female, M = 5.17 years old, SD = ±1.97) whose language, working memory, and socioemotional functioning were evaluated during the course of treatment and educational planning. Bivariate analyses indicated that working memory was related to a number of socioemotional domains (e.g., functional communication, atypicality, withdrawal), as were language scores (e.g., social skills, inattention). The direction of these associations was such that stronger working memory and language skills were related to more regulated socioemotional functioning. A call to action of the current study includes more education with regard to profiles and presentations of children with hearing loss, and an early focus on socioemotional learning to foster the development of regulatory skills.

Many farms utilize closed-type livestock systems to enhance productivity and facilitate effective environmental management. However, the confined nature of these closed spaces poses an increased risk of exposure to harmful gases and organic dust for both workers and livestock. Additionally, the introduction of outside air through ventilation systems can lead to temperature fluctuations within the breeding environment, resulting in potential productivity issues. This research paper employs computational fluid dynamics (CFD) to develop ventilation operation management plans that address both the working environment and the breeding environment simultaneously. The proposed plans are designed to be easily implemented in practical farm settings. The findings of this study, based on simulation analysis, indicate that while ventilation is effective in reducing harmful gases and improving the working environment, its efficiency decreases after the initial 3 minutes of operation. Furthermore, uncontrolled ventilation can cause sudden temperature changes, which may adversely affect the well-being of the livestock. However, when upgraded ventilation structures are implemented, significant improvements in the working environment (an average of 27.3% improvement) can be achieved while maintaining temperature stability for the livestock. These results highlight the importance of referring to the provided ventilation operation management table before commencing work, as it enables workers to improve the working environment while minimizing the potential impact of ventilation on the breeding environment.

Peru has one of the highest informal employment rates in Latin America (73%). Previous studies have shown higher prevalence of poor self-perceived health (P-SPH) in informal workers compared to formal. The study’s aim is to analyse the role of working conditions in the association between informality and SPH in urban working population in Peru. We conducted a cross-sectional study based on 3098 workers from the working conditions survey of Peru 2017. Prevalence of P-SPH and exposure to poor working conditions were calculated separated by formal and informal employment and stratified by sex. Poisson regression models were used to assess the association between P-SPH and informal employment, with its prevalence ratios (PR) crude and adjusted for working conditions. Informal employment was 76% in women and 66% in men. Informal workers were more exposed to poor working conditions than formals and reported worse SPH. Workers in informal employment showed higher risk of P-SPH than formals: PR 1.38 [95% CI: 1.16 – 1.64] in women and PR 1.27 [95% CI: 1.08 – 1.49] in men. Adjustment by working conditions weakened the association in both sexes. In women, this association was only partially explained by worse working conditions 1.23 [95% CI: 1.04 – 1.46]. The negative effect on informal workers’ health is partially explained by poor working conditions. However, there is a part of the effect explained by informality per se.

Although working memory (WM) is crucial for intellectual abilities, not much is known about its brain underpinnings, especially the structural connectivity. We used diffusion tensor imaging (DTI) to look across the whole brain for the white matter integrity correlates of the individual differences in the reading span (verbal WM capacity during reading) in healthy adults. Right-handed healthy native Russian speakers (N = 67) underwent DTI on a 3T Philips Ingenia scanner. Verbal WM was assessed with the Daneman-Carpenter reading span test (Russian version). Fractional anisotropy maps from each participant were entered into the group tract-based spatial statistics analysis with the reading span as a covariate; the results were TFCE-corrected. After taking into account effects of age, sex, education and handedness, reading span positively correlated with the white matter integrity in multiple sites: the body, the genu and the splenium of corpus callosum; bilateral corona radiata (anterior, posterior, and superior); bilateral superior longitudinal fasciculus; several tracts in the right hemisphere only, including the internal and external capsule; bilateral superior parietal and frontal white matter. Although the left hemisphere is central for verbal processing, we revealed the important role of the right hemisphere white matter for the verbal WM capacity. Our finding indicates that larger verbal working memory span may originate from additional processing resources of the right hemisphere.

1) Background: A significant proportion of child laborers are compelled to work in exploitative environments, experience both deteriorating health and financial loss. The present study sought to determine the factors affecting child labour and the characteristics of their working environment. 2) Methods: A questionnaire survey was conducted with 80 child labourers aged 5 to 17 years. Alongside descriptive statistics, a newly devised technique known as Influencing Causes Index (ICI) was administered and tested. 3) Results: The startling demographic findings reveal that peak share of child labourers are young children (12-14 years) and 32.5% child laborers had never attended school. The thorough assessment of determinants reflects that not only poverty, but schooling expenses and lack of access opportunity to primary schools are also the top-ranked push factors to trigger children towards labour. Around 72.5% of children work for over 8 hours a day. A significant proportion of participants received no leave, training, or access to hygiene facilities. The existing pattern of employment and working conditions resulted in musculoskeletal pain and dermatological infections among child labourers (p&lt;0.05). 4) Conclusion: This research suggests that income measures for households, and an education programme for both children and parents would expedite the abolition of child labour.

Background: Mental health is a growing concern worldwide. It is not well understood whether Nepali workers, including international labour migrants from Nepal, are at higher risk of developing mental health problems. The purpose of our study is to determine the prevalence of and examine the risks factors for depression among returnee migrants and non-migrant working male adults in Nepal. Methods: A cross-sectional survey of a probability-based sample of 725 participants was conducted in February 2020. The sample was comprised of two groups based on migration status: returning migrants and non-migrants. Logistic regression was applied to investigate factors associated with symptoms depression.Results: The overall prevalence of depression was 10.1%. However, the prevalence of depression was lower (7%) among returnee migrants compared to non-migrants (13.7%). Participants in the lower income group were more at risk of depression (OR=5.38, 95% CI: 1.96-14.78) than those in the higher income group. Similarly, Buddhists and Christians were more likely to be depressed (OR=2.17, 95% CI: 1.02-4.64) than Hindus. Interestingly, participants having more than two children had a higher prevalence of depression (OR=5.14, 95% CI: 1.22-21.63) compared with those having no children. Unmarried participants were more likely to be depressed (OR=4.05, 95%, CI:1.10-14.93) than those who were married. Conclusion: The working Nepali adult male population in Nepal, including returning migrants, is at risk of depression, but this risk is lower in those in the higher income group, returnee migrants, married, Hindus and those with no children. This study highlights the need to monitor and develop national policies to ensure the mental health of Nepali male adult population, including returnee migrants.

The developmental phase of adolescence is characterized by a multitude of neurocognitive and psychosocial changes and is therefore considered one of the most critical developmental periods of life. Experimentation on the use of substances often begins in adolescence and so does the addiction process. Most research in human subjects shows that chronic cannabis abuse is the cause of the impairment of some cognitive functions, affecting the performance on divided attention, verbal memory and working memory. In this study, we wanted to investigate how the abuse of cannabis (chronic, occasional and absence use) can influence global cognitive functioning, also through executive functions. From the statistical analyzes of our study, it emerges that the group of subjects who use chronic cannabis (group 1) has a significant drop in working memory tasks compared to the group that does not use it (group 3). In addition, the goal of future studies by our group is to verify the permanent alteration of cognitive processes affected through revaluations with calendar follow-up (controlled).

Falls at height are among the major causes of fatal accidents at work, especially in the construction sector. Maintaining balance while performing a tool with both hands generates physical efforts and mental loading that needs to be managed for workers’ safety and health. The purpose of the study is to compare perceived (dis)comfort (overall and localized), the ergonomic risk and the perceived effort through the acquired postures that subjects assumed during the execution of simple and common tasks both on a ladder and on the ground. 26 subjects were asked to perform four tasks in both conditions: top screwing, frontal screwing, object picking from the bottom forward, and object picking from the bottom sideways. Subjective and objective data were gathered for assessing subjective experience (discomfort and effort, perceived) and ergonomic risk. Results highlighted few ergonomic risk differences among “on ladder” and “on ground” tasks, while subjective data reveal significant differences in different scenarios. Main results regard knees and neck areas as the most critical ones.

This study investigated gender differences in exposure to hazardous factors, health problems, and work environment satisfaction and identified the effects of such differences on farmworkers in Korea. Through the 6th Korean Working Conditions Survey (KWCS) conducted by the Occupational Safety and Health Research Institute (OSHRI), the raw data on 2,347 farm-workers were analyzed to present descriptive statistics for demographic characteristics, exposure to hazardous factors, health problems, and work environment satisfaction. We compared be-tween genders using chi-squared tests and investigated the effects of gender-specific working conditions on work-related health problems and work environment satisfaction using multi-variate logistic analysis. The results were presented as an odds ratio (OR) with 95% confidence interval. Job position predicted work-related health problems in male farmworkers and work environment satisfaction in female farmworkers. Furthermore, female farmworkers perceived themselves to have more health problems than male farmworkers. Nevertheless, female farm-workers received less health and safety information and had lower work environment satisfac-tion compared to male farmworkers. The findings may improve the occupational welfare of farmworkers through continuous enhancement of the agricultural labor environment. Keywords: work-related; working condition; farmworker; agriculture; musculoskeletal; KWCS

The contribution of academics and researchers to the discussion around sustainable rural development planning and its impact on rural communities has grown exponentially in recent years. Understanding trends in sustainable rural development research requires considering the different factors involved and affecting people from a holistic approach. This review examines, through bibliometric studies, the scientific knowledge generated on sustainable rural development planning in the last 50 years, analyzing 6,895 articles published in journals between 1970 and 2020. The results reveal the existence of three clusters and an important growth is observed to respond to the continuous needs in relation to sustainable rural development. This research shows the evolution of a new approach for the planning of sustainable rural development projects in postmodernity: Working with People (WWP). This WWP model, as a conceptual framework from social learning has been validated as a novel proposal in numerous contexts. The bibliometric analysis shows an evolution "From Putting the Last first" to "Working with People in Rural Development" research and the contributions of influential teachers such as Chambers and Cernea. These bibliometric analyses demonstrate the correct approach of WWP model, and open new fields of research in the planning of sustainable rural development projects.

(1) Background: Many processes play a key role in how language functions, and these processes are strongly related to reading. The aim of our research was to explore the relationship between reading impairment associated with adult acquired cognitive-linguistic impairment (aphasia) and the components of verbal working memory involved in language functioning. (2) Methods: We measured the reading abilities of a total of twenty-two adults diagnosed with aphasia using the Adult Acquired Reading Assessment. To assess working memory, we applied the measurement procedures available in Hungarian for measuring verbal working memory. Correlation analyses were performed to investigate the relationship between reading and the components of working memory involved in processing verbal information. In order to explore this relationship as comprehensively as possible, the results were analysed quantitatively through group-level analyses and qualitatively through case studies. (3) Results: The results suggest that the functioning of phonological short-term memory and verbal working memory is crucial for the reading of vowels, for certain word reading sub-processes such as reading complex words and pseudowords, and for text comprehension tasks, in particular for the processing of implicit text-level infor-mation. (4) Conclusions: The data support a strong relationship between reading and working memory, but not all mechanisms are related with the same weighting. The data will contribute to the understanding of the relationship between reading and working memory, which is important in order to see which cognitive components are dominant in reading instruction and which other cognitive mechanisms are affected in poor readers.

Recent research has suggested that working memory training interventions may benefit children with Developmental Language Disorder (DLD). The current study investigated a short and engaging adaptive working memory intervention that targeted executive skills and aimed to improve both language comprehension and working memory abilities in children with DLD. Forty-seven 6- to 10-year-old children with DLD were randomly allocated to an executive working memory training intervention (n=24) or an active control group (n=23). A pre-test/intervention/post-test/9-month-follow-up design was used. Outcome measures included assessments of language (to evaluate far transfer of the training) and working memory (to evaluate near transfer of the training). Hierarchical multiple regression analyses controlling for pre-intervention performance and age found group to be a significant predictor of sentence comprehension and of performance on six untrained working memory measures at post-intervention and 9-month follow-up. Children in the intervention group showed significantly higher language comprehension and working memory scores at both time points than children in the active control group. The intervention programme showed potential to improve working memory and language comprehension in children with DLD and demonstrated several advantages: it involved short sessions over a short period; caused little disruption in the school day; and was enjoyed by children.

This article reports on the findings of a research project examining how to create a profession that is attractive and fulfilling for new and existing school leaders in two different municipalities in Sweden. The project set out to explore how work environments, career structures, salaries, and working conditions can contribute to attracting, retaining, and motivating school leaders to stay longer in the profession. To realise this objective, the study adopted a qualitative research design. Data was collected by carrying out semi-structured interviews with a sample of five school leaders in two different municipalities to investigate their experiences and views of the profession. The findings demonstrate that school leaders’ working conditions play a more critical role in their decisions to stay or leave the profession than financial compensation. The study also shows an unequal allocation of resources, both in terms of support functions and the limited time available for in-service education.

This study has been taken during COVID-19. It describes the working scenario of all class of peoples and their mental anxieties are analysed based on their psychological behaviour patterns.

Metal matrix composite are used in such fields of technology, such as: aerospace, electronics, energy, industry, defense, automotive, aviation, shipbuilding, and more. Composite coatings of ceramic - metals is used primarily to enhance the durability of machine parts. Therefore, new materials are permanently looked for, what has resulted in the past in development of composite materials. The coatings dispersed are consisting of metallic matrix (metals and their alloys) and small non-metallic particles. The deposition of ceramic particles simultaneously with metallic matrix leads often to composite coatings possessing properties much better than those of metallic coating. The nickel and less often, other iron group elements are usually used as a matrix and Al2O3 as tough particles. The welding technology of applying alloy and composite coatings is widely used. The technology of infrasound thermal spraying of metal matrix composite coatings was presented. It is a simple technology and a very useful one in ship machinery regeneration during the cruise craft (e.g. internal combustion engines, torque pumps, separators). The metal matrix composite coatings must undergo finishing due to high surface roughness after application. In the article to used finishing by plastic working and machining of coatings nickel matrix composite was proposed.

Studies into the cognitive effects of alcohol have been mixed. They also present methodological challenges, often relying on self-report of alcohol consumption leading to hangover. The current study used BAC (obtained via breathalyser) and self-reported drinking behavior during a night out and related these to hangover severity and cognitive function measured over the internet in the same subjects the following morning. Volunteers were breathalysed and interviewed as they left a central entertainment district of an Australian state capital. They were provided with a unique identifier and, the following morning, logged on to a website. This included an online version of the Alcohol Hangover Severity Scale (AHSS), and number and type of drinks consumed the previous night and the eTMT-B - a validated, online analogue of the Trail Making Test B of executive function and working memory. Hangover severity was significantly correlated with one measure only, namely the previous night’s BAC (r = .228, p = .019). Completion time on the eTMT-B was significantly correlated with hangover severity ( r = .245, p = .012), previous night’s BAC (r = .197, p = .041) and time spent dinking (r = .376, p < .001). These findings confirm that alcohol hangover negatively affects cognitive functioning and that poorer working memory and executive performance correlates with hangover severity. The results also support the utility of using online measures in hangover research.

Novel Ca3(BTC)2 metal-organic frameworks with different sizes and shapes constructed by Ca2+ and trimesic acid as metal center and ligands respectively were synthesized by a surfactant-assisted method. The relationship between the quantity of surfactant and the particle morphology of the product have been further studied. The samples were characterized by scanning electron microscope, powder X-ray diffraction and Inductively coupled plasma mass spectrometry. The results indicated that the size and shape of Ca3(BTC)2 could be regulated by changing the quantity of surfactant. Rod- and sheet-like Ca3(BTC)2 MOFs have been readily availabled. The removal kinetics of heavy metals of Pb(II) were also studied by rod-like Ca3(BTC)2. The results showed that as-synthesized Ca3(BTC)2 could effectively remove heavy metals of Pb(II) from the sewage.

Dimers and oligomers of alkenes represent a category of compounds that are in great demand for diverse industrial sectors. Among the developing synthetic methods, the catalysis of alkene dimerization and oligomerization using transition metal salts and complexes is of undoubted interest for practical application. This approach demonstrates substantial potential, offering not only elevated reaction rates but also precise control over the chemo-, regio-, and stereoselectivity of the reactions. In this review, we discuss the data on catalytic systems for alkene dimerization and oligomerization. Our focus lies in the analysis of how the activity and chemoselectivity of these catalytic systems are influenced by various factors, such as the nature of the transition metal, the ligand environment, the activator, and substrate structure. Notably, the review particularly discusses the reaction mechanisms, encompassing metal complex activation, structural and dynamic features, and the reactivity of hydride intermediates, which serve as potential catalytically active centers in alkene dimerization and oligomerization.

Metal/metal composites represent a particular class of materials showing innovative mechanical and electrical properties. Conventionally, such materials are produced by severely plastically deforming two ductile phases via rolling or extruding, swaging, and wire drawing. This study presents the feasibility of producing metal/metal composites via a capacitive discharge-assisted sintering process named electro-sinter-forging. Two different metal/metal composites with CP-Ti/AlSi10Mg ratios (20/80 and 80/20 %vol) are evaluated, and the effects of the starting compositions on the microstructural and compositional properties of the materials are presented. Bi-phasic metal/metal composites constituted by isolated α-Ti and AlSi10Mg domains with a microhardness of 113 ± 13 HV_0.025 for the Ti20-AlSi and 244 ± 35 HV_0.025 for the Ti80-AlSi are produced. The effect of the applied current is crucial to obtain high theoretical density, but too high currents may result in Ti dissolution in the Ti80-AlSi composite. Massive phase transformations due to the formation of AlTiSi based intermetallic compounds are observed through thermal analysis and confirmed by morphological and compositional observation. Finally, a possible explanation for the mechanisms regulating densification is proposed accounting for current and pressure synergistic effects.

Herein, a novel cavity design of racetrack integrated circular cavity established on metal-insulator-metal (MIM) waveguide is suggested for refractive index sensing application. Over the past few years, we have witnessed several unique cavity designs to improve the sensing performance of the plasmonic sensors created on the MIM waveguide. The optimized cavity design can provide the best sensing performance. In this work, we have numerically analyzed the device design by utilizing the finite element method (FEM). The small variations in the geometric parameter of the device can bring a significant shift in the sensitivity and FOM of the device. The best sensitivity and FOM of the anticipated device are 1400 nm/RIU and ~12.01, respectively. We believe that the sensor design analyzed in this work can be utilized in the on-chip detection of biochemical analytes.

Electroless etching of semiconductors was elevated to an advanced micromachining process by the addition of a structured metal catalyst. Patterning of the catalyst by lithographic techniques facilitates the patterning of crystalline and polycrystalline wafer substrates. Galvanic deposition of metals on semiconductors has a natural tendency to produce nanoparticles rather than flat uniform films. This characteristic makes possible the etching of not only wafers but also particles with arbitrary shape. While it has been widely recognized that spontaneous deposition of metal nanoparticles can be used in connection with etching to porosify wafers, it is also possible to produced nanostructured powders. MACE can be controlled to produce (1) etch track pores with shapes and sizes closely related to the shape and size of the metal nanoparticle, (2) hierarchically porosified substrates exhibiting combinations of large etch track pores and mesopores, and (3) nanowires with either solid or mesoporous cores. This review discussed the mechanisms of porosification, processing advances and the properties of the etch product with special emphasis on the etching of silicon powders.

Serum transferrin (sTf) plays a pivotal role in regulating iron biodistribution and homeostasis within the body. The molecular details of sTf Fe(III) binding, blood transport, and cellular delivery through transferrin receptor-mediated endocytosis are generally well-understood. Emerging interest exists in exploring sTf complexation of nonferric metals as it facilitates the therapeutic potential and toxicity of several of them. This review explores recent X-ray structural and physiologically relevant metal speciation studies to understand how sTf partakes in the bioactivity of key non-redox active hard Lewis acidic metals. It challenges preconceived notions of sTf structure function correlations that were based exclusively on the Fe(III) model by revealing distinct coordination modalities that nonferric metal ions can adopt and different modes of binding to metal-free and Fe(III)-bound sTf that can directly influence how they enter into cells and, ultimately, how they may impact human health. This knowledge informs on biomedical strategies to engineer sTf as a delivery vehicle for metal-based diagnostic and therapeutic agents in the cancer field. It is the intention of this work to open new avenues for characterizing the functionality and medical utility of nonferric-bound sTf and to expand the significance of this protein in the context of bioinorganic chemistry.

This article will briefly review the progress of h-BN based solid-state metal semiconductor metal (MSM) neutron detectors. In the last decade, several groups have been working on hexagonal boron nitride (h-BN) based solid-state neutron detectors. Recently, the detection efficiency of 59% has been reported. Efficient, low-cost neutron detectors made from readily available materials are essential for various applications. Neutron detectors are widely used to detect fissile materials and nuclear power plants for security applications. The most common and widely used neutron detectors are 3He based, which are sometimes bulky, difficult to transport, have high absorption length, need relatively high bias voltage (>1000 V), and have low Q-value (0.764 MeV). Also, 3He is not readily available material. Thus, there is a strong need to find an alternative detection material. 10B isotope has a high neutron absorption cross-section, and it has been tested as a coating on the semiconducting materials. Due to the two-step process, neutron capture through 10B, and then electron-hole pair generation in a typical semiconducting material, the efficiency of these devices is not up to the mark. The progress in h-BN based detectors requires a review to envision the further improvement in this technology.

Using two metal insulated metal waveguides (MIM) and five resonator (a quadrilateral cavity and three rings with different dimensions), we design a plasmonic refractive index sensor. Using the time domain finite difference method, we examine and analyze the sensor performance (numerical analysis) and using the transmission line model method, we theoretically examine the performance of the sensor By summarizing these two methods and calculating the sensitivity coefficient S, quality coefficient Q and figure of merit (FOM), a plasmonic sensor with good performance is obtained. Using the supermods of the resonators, we will achieve a stable wavelength spectrum and a suitable and stable sensitivity coefficient spectrum. Challenges and changes that occur in different modes of this sensor will lead to a balanced and relatively good structure. This designed sensor can be useful in the development of integrated optical circuits.

In this paper, a plasmonic refractive index sensor based on metal insulated metal waveguide (MIM) with three rings and a resonant cavity is first proposed and numerically evaluated. Next, we add four teeth to the sensor structure. We study and simulate the resonant wavelengths and refractive index of resonators using the time difference finite difference method. Given that the sensor and the conduction characteristics of plasmonic waves are influenced by the structure parameters,Therefore, by changing the refractive index and changing the dimensions and coordinates of the cavity and rims, we can change the passage coefficient in the resonant modes and measure the sensor performance. As a result, we obtain the sensitivity coefficient, the figure of merit (FOM) and the quality factor Q of the sensor. We modulate the resonance wavelength FWHM using the generated modes and reach a sensitivity of 2166 nm / RIU. These plasmonic sensors with a simple framework and balanced performance and high optical resolution can be used to measure the refractive index in the medical, chemical and food industries.

In this study, we seek to analyze and numerically evaluate a plasmonic sensor. To form the sensor structure, we use several amplifiers, such as two rings attached to each other and a cavity, as well as two metal insulating metal waveguides (MIM). At the beginning of this simulation, we must examine the resonant wavelengths and the refractive index of the resonators using the finite difference time domain method. By changing the refractive index and changing the dimensions of the cavity and the rims, we seek to investigate the sensor performance and the conduction characteristics of the plasmonics and to obtain the effect of these parameters. To evaluate the sensor performance, we calculate the three factors of sensitivity coefficient S, quality factor Q and figure of merit (FOM), here we reach the sensitivity of 987.6 nm / RIU. Such a plasmonic sensor with a simple framework and high optical resolution can be very useful for sensor systems on optical circuits.

In recent years, many researchers have begun to shift their focus onto the synthesis of nanomaterials as this field possesses immense potential that may provide incredible technological advances in the near future. The downside of conventional synthesis techniques, such as co-precipitation, sol-gel and hydrothermal methods, is that they necessitate the use of toxic chemicals, produce harmful by-products and require a considerable amount of energy; therefore, more sustainable fabrication routes are sought after. Biological molecules have been previously utilised as precursors to nanoparticle synthesis, thus eliminating the negative factors involved in traditional methods. In addition, transition-metal nanoparticles possess a wide scope of applications due to their multiple oxidation states and large surface areas; thereby allowing for a higher reactivity when compared to their bulk counterpart and rendering them an interesting research topic. However, this field is still relatively unknown and unpredictable. Therefore, this review aims to obtain a better understanding on the plant-mediated synthesis process of the major transition-metal and transition-metal oxide nanoparticles, and how different parameters affect their unique properties.

Metal additive manufacturing (AM) has gained much attentions in recent years due to its advantages including geometric freedom and design complexity, appropriate to a wide range of potential industrial applications. However, conventional metal AM methods have high-cost barriers due to the initial cost of the capital equipment, support and maintenance, etc. This study presents a unique low-cost metal material extrusion (MME) technology. The filaments used have polylactic acid (PLA) as the matrix and metal powders (copper, bronze, stainless steel, high carbon iron, and aluminum) as reinforcements. Using the proposed fabrication technology, test specimens were built by extruding polymer/metal composite filaments, which were then sintered in an open-air furnace to produce solid metallic parts. In this research, the mechanical and thermal properties of the built parts are examined using tensile tests, thermogravimetric-, thermomechanical- and microstructural analysis.

A widely used material for the photovoltaic (PV) arrays is crystalline silicon. The PV conversion losses of a power plant as a yearly average, include: light reflection losses (3,1%), low radiation and shadowing losses (3,2%), DC board losses (1,2%), DC/AC conversion losses (4%), mismatching losses (5,7%), temperature losses (7,6%), it can be stated that the major fraction of losses is related to the temperature increase of the sili-con solar cells. In real operating conditions, solar cells and modules operate at different temperatures, either due to changes in ambient temperature (atmospheric conditions changing with the seasons) and cooling rate, depending on wind speed and insolation, rain, snow, etc., or due to changes in the amount of heat (electrical power lost on the internal resistance of the cell), emitted during their operation. The possibility of operation of these devices in ground applications in the temperature range from -20 to +70C should be taken into account. The given range, of course, does not apply to work in the tropics. The detailed studies of the temperature on the electrical parameters of crystalline silicon solar cells have been presented. The theoretical justification of the temperature influence mechanism on the exploitation parameters of the silicon solar cells was submitted. Photovoltaic cells and modules are of better quality, the lower the value of temperature coefficients, in particular, attention should be paid to the decrease in maximum power with increasing temperature.The experimental results were compared with the theoretical predictions and the results, obtained by other authors and producers.

Background: Despite hearing aids adequately compensate for hearing loss, a substantial proportion of the population leave their hearing difficulties untreated. Even though this is a well-known clinical issue, the optimal approach to address this issue during the hearing rehabilitation process is still unclear. Purpose: The present study aims to characterise behavioural and neurophysiological auditory and cognitive processing skills in experienced hearing aid users versus those with normal hearing, aimed at providing clinicians with the evidence required to adequately manage the expectations of their clients, thus indirectly reinforcing hearing-aid adoption within the adult population with hearing loss. Research design: Behavioural tests included auditory, cognitive, and speech-in-noise tasks; and neurophysiological testing included cortical auditory evoked potentials evoked by a /da/ stimulus presented at 65 dB SPL. The tests were selected based on previous literature supporting specific speech-understanding skills. Study sample: Ten participants (7 female, 21—68 years) with bilateral, mild-moderate to moderately-severe sensorineural hearing loss (HL), and 10 with clinically normal hearing (NH, 8 female, 19—62 years) participated in the study. Data collection and analysis: Behavioural data was analysed using multivariate analysis of variance (MANOVA) and neurophysiological analysis used measurements such as independent t-test, time-frequency analysis and inter-trial phase coherence. Results: The NH and HL groups presented similar scores in all the behavioural tasks. Time-frequency analysis revealed a statistically significantly reduction in alpha (8–12 Hz) synchronisation at the centro-frontal electrodes in the HL group – a brain activity pattern that has been associated with listening effort, inhibition and selective attention. Conclusions and significance: Results support the conclusion that hearing aids are effective in compensating for the audibility of their users, enabling them to perform at similar levels than their normal-hearing peers. However, the reduced alpha synchronisation observed in the HL population indicates that adequate audibility does not extend to improved neural responses. Future studies need to investigate the induced activity in speech understanding paradigms to explore the auditory processing differences at cortical level. The results are only from a small sample size but the findings have the potential to support clinicians in managing adequately the expectations of their clients in regards the benefits of hearing aid technologies.

Based on the analysis of the working principle, circuit design and working loss of the common charger DC/DC converter, this paper designs a ZVS half-bridge three-level DC/DC converter based on non-phase-shift control mode, and proposes a multi-stage constant current and voltage limiting charging control strategy based on modulation wave selection control. The simulation results show that the proposed method and control strategy have faster voltage regulation ability and wider stability margin, and can achieve stable current sharing control in the charging process.

The purpose of this study is to examine the driving model of determinant factors that affects the performance of small and micro enterprises empirical evidence from Amhara Region, Ethiopia. The study used primary and secondary data from manufacturing, construction, urban agriculture, trade, and service entrepreneurs found in Bahirdar, Dessie & Gonder Cities using a purposive sampling technique. It also used the descriptive research design with a self-administered survey questionnaire. The Statistical analysis tools, SPSS and Amos, software were applied to analyze the data. Multiple regression model results revealed that access to credit, initial capital, working premises, industry category, market linkage, ICT adoption have a positive relationship and a major impact on the Amhara region's enterprise performance. Hence, the outcome variable, enterprise performance, is highly affected by all predicted variables. As the study finding shows, a lack of access to credit, , market linkage, working premises), initial capital, and information communication Technology problems are critical challenges of SMEs. The Regional Government, TVED Bureau, Micro Finance Institutions, , should take corrective action to provide sufficient credit and long-term loans to protect inflation. Moreover, this study proposed a sustainable cluster management approach that solves their challenges in an integrated way.

In the coming years, the Anthropocene Working Group (AWG) will submit its proposal on the ‘Anthropocene’ as a new geological epoch to the International Commission on Stratigraphy (ICS) for approval. If approved, the proposal will be send to the International Union of Geological Sciences (IUGS) for ratification. If the proposal is approved and ratified, the ‘Anthropocene’ will be formalised and the Holocene Series/Epoch will be officially terminated. Currently, the ‘Anthropocene’ is a broadly used term and concept in a wide range of scientific and non-scientific situations and, for many, the official acceptance of this term is only a matter of time. However, the AWG proposal, in its present state, seems to not fully meet the ICS requirements for a new geological epoch. This paper asks what could happen if the current ‘Anthropocene’ proposal is not formalised by the ICS/IUGS. The possible stratigraphic alternatives are evaluated on the basis of the more recent literature and the personal opinions of distinguished AWG and ICS members. The eventual impact on environmental sciences and on non-scientific sectors, where the ‘Anthropocene’ seems already firmly rooted and de facto accepted as a new geological epoch, are also discussed.

This study evaluates literature on the wheel of audit partners in Chinese companies and institutions by examining the impact of relationships before and after the rotation between the input and output partners. We consider the partners in the rotation before the rotation, before the work relationship. We find two different results from the previous working relationships: (a) increasing the likelihood of the outgoing partners after the cooling period, and (b) reducing the quality of the audit and lower accounting after the rotation. These findings ask whether the rotational partners are truly independent of the working relationships.

Executive functions comprise top-down cognitive processes that exert control over information processing, from acquiring information to issuing a behavioural response. These cognitive processes of inhibition, working memory and shifting underpin complex cognitive skills, such as episodic memory and planning, which have been repeatedly investigated in several bird species in recent decades. Until recently, avian executive functions were studied in relatively few bird species, but have gained traction in comparative cognitive research following MacLean and colleagues’ large-scale study (2014). Therefore, in this review paper, relevant previous findings are collected and organized to facilitate further investigations of these core cognitive processes in birds. This review can assist in integrating findings from avian and mammalian cognitive research and further current understanding of executive functions’ significance and evolution.

Learning dental procedures is a complex task involving the development of fine motor skills. The reported use of theories and/ or evidence for designing learning activities to develop the fine motor skills needed for dental practice is limited. The aim of this review is to explore the available body of knowledge related to learning fine motor skills in dentistry. Evidence from studies investigating motor skill learning highlights the negative impact of self-focus and self-regulation on learning outcomes, particularly during the early stages of learning. The development of activities and schedules that enable novices to demonstrate characteristics similar to experts, without the reported long period of ‘deliberate practice’, is clearly of value. Outcomes of learning implicitly are important in dentistry because working under stressful conditions is common, either during undergraduate study or in practice. It is suggested that learning implicitly in the simulation stage can reduce disrupted performance when transitioning to clinical settings. Therefore, further investigation of effective methods for learning dental fine motor skills is indicated, using approaches that result in robust performance, even under stressful conditions.

The purpose of this study is to examine the driving model of determinant factors that affects the performance of small and micro enterprises empirical evidence from Amhara Region, Ethiopia. The study used primary and secondary data from manufacturing, construction, urban agriculture, trade, and service entrepreneurs found in Bahirdar, Dessie & Gonder Cities using a purposive sampling technique. It also used the descriptive research design with a self-administered survey questionnaire. The Statistical analysis tools, SPSS and Amos, software were applied to analyze the data. Multiple regression model results revealed that access to credit, initial capital, working premises, industry category, market linkage, ICT adoption have a positive relationship and a major impact on the Amhara region's enterprise performance. Hence, the outcome variable, enterprise performance, is highly affected by all predicted variables. As the study finding shows, a lack of access to credit, , market linkage, working premises), initial capital, and information communication Technology problems are critical challenges of SMEs. The Regional Government, TVED Bureau, Micro Finance Institutions, , should take corrective action to provide sufficient credit and long-term loans to protect inflation. Moreover, this study proposed a sustainable cluster management approach that solves their challenges in an integrated way.

: The performance of the students in academics depends on many different factors. One of these factors is the economic status of their families. Education in public schools, though it is free, some parents cannot afford to send their children to school due to financial constraints. Education as a free is every individual's right in society, but it becomes a privilege because of a lack of financial support. This research work is a comparative study of students' or learners' performance in mathematics among students from working and non-working. This research article's ultimate objective is to investigate and compare a significant difference in their performance in the subject mathematics. The research methodology utilizes a t-test to analyze and synthesize primary data sources collected via interview and academic records, and diverse literature on the study area. However, the research findings revealed no significant difference in the two groups (the working and non-working group of learners). Therefore, it is recommended that secondary schools should be provided with adequate books and facilities and faculty school interventions and programs and promote the usage of SIM or Strategic Intervention Materials for learning and memory enhancement among learners.

A premise of statistical learning research is that learners attend to and learn the frequencies of repeating or co-occurring elements in the input. When the input is a series of words, participants readily learn the frequencies of phoneme sequences, that is, to learn phonotactic frequencies. Inherent to the concepts of both frequency and phonotactics is order, or the temporal structure of the input. Order is similarly inherent to statistical learning, yet the effect of order on statistical learning is not well understood. In the present study, adult participants learned the relative frequencies of eight item-medial consonant sequences, for example, the /mk/ in /nʌmkət/. Across five ordering conditions, both familiarization and test stimuli were independently ordered and randomized, thus allowing for a relatively broad search for order effects in an established statistical learning paradigm. Participants learned the target frequencies equivalently across the five ordering conditions, indicating no modulating effect of order. Nevertheless, participants also approached the task by applying idiosyncratic, structured orders to their responses. The result is an unexpected but robust effect of order. Both the results and the design of the study also allow for increased integration of statistical learning with memory and other aspects of cognition.

The mechanization of agricultural activities has led to indiscriminate deposition of toxic xenobiotics, including organophosphates in the biomes, and this has led to intoxication characterized with deleterious oxidative and neuronal changes. This study investigated the consequences of oxidative and neurogenic disruptions that follow exposure to two organophosphates, chlorpyrifos (CPF) and dichlorvos (DDVP) on neuro-cognitive performance and anxiety-like behaviors in rats Thirty-two adult male Wistar rats (150 – 170g) were randomly divided into 4 groups, orally exposed to normal saline (NS), DDVP (8.8mg/kg), CPF (14.9mg/kg) and DDVP+CPF for 14 consecutive days. On day 10 of exposures, anxiety-like behaviors and amygdala dependent fear learning were assessed using Open Field and Elevated Plus Maze paradigms respectively, while spatial working memory was assessed on day 14 in the Morris water maze paradigm, following 3 training trials each on days 11, 12 and 13. On day 15, the rats were euthanized, and their brains excised, hippocampus and amygdala removed, 5 of which were homogenized and centrifuged to analyze nitric oxide (NO) metabolites, total reactive oxygen species (ROS), and acetylcholinesterase (AChE) activity, and the other three processed for histology (cresyl violet stain) and proliferative marker (Ki67 immunohistochemistry). Marked (p≤0.05) loss in body weight, AChE depletion, and overproduction of both NO and ROS were observed after repeated exposure to individual and combined doses of CPF and DDVP. Insults from DDVP exposure appeared more severe owing to the observed greater losses in the body weights of exposed rats. There was also a significant (p≤0.05) effect on the cognitive behaviors recorded from the exposed rats, and these deficits were related to the oxidative damage and neurogenic cell loss in the hippocampus and the amygdala of the exposed rats. Taken together, these results provided an insight that oxidative and neurogenic damages are central to the severity of neuro-cognitive dysfunction and increased anxiety-like behaviors that follow organophosphate poisoning.

Metals are particularly sensitive to some pollutant gases. Many museum showcases and store rooms present atmospheres that can corrode cultural heritage artefacts containing metals. Whilst numerous strategies have been reported to mitigate such situations, avoiding them is preferable. Several approaches to testing materials used in construction, fitting out or dressing are used. The relative merits and drawbacks will be discussed. Several parameters of the most widely used, the accelerated corrosion ‘Oddy’ test have been investigated. The influence of abrasive on subsequent corrosion of lead and copper coupons have been assessed. Quantification methods for tested coupons are reviewed. The influence of test duration and temperature were assessed through comparison with real life, long term experience of materials behaviour. Direct contact tests with the material tested touching the test material has been investigated. Several materials present in artefacts are known to potentially cause corrosion when enclosed with metals in other artefacts. A number of situations have been investigated with pollution and RH and some corrosion rate measurements. Ways to isolate artefacts or mitigate are explored and a decision support model has been developed.

This research was conducted to analyze the content of Fe, Cu, Cd, Cr, and Pb in several species of fish taken from three lakes that is closely to disposal of industrial waste in Indonesia. The fish samples were taken from three lakes, namely, Muara Angke, Weda, and Morowali. The samples from Morowali were analyzed in April 2019, those from Weda from November to December 2019, and those from Muara Angke in June 2018. All the samples were then analyzed at the chemistry laboratory of the Department of Chemistry, Faculty of Mathematics and Natural Science, University of Indonesia, and the Integrated Laboratory of IPB. The results showed that all types of fish from Morowali and Weda were no longer safe to consume because they contained Fe, Cu, Cd, and Cr exceeding the threshold of metal contamination. Meanwhile, all types of fish from Muara Angke, except for ayam-ayam, are still safe for consumption. The results of this study can be a source of information regarding metal content in fish and fish feed for safe consumption. Several studies have been done to determine the metal pollutants contained by fish. Given the high consumption rate of fish and the hazards of heavy metals on humans’ health, such research must be furthered

Gasca D herbal formulation is an antidiabetic medicine for the management of diabetes mellitus produced exclusively from natural ingredients. The level of some essential elements (Copper, chromium, Cobalt, Iron, Manganese, Nickel and zinc) and toxic (Cadmium, Arsenic, Mercury, and Lead) heavy metals were determined using microwave plasma-atomic emission spectrometry (MP-AES). The aim of this study is to evaluate the levels of essential and toxic heavy metals and also identify bioactive compounds present in Gasca D herbal formulation. The result shows no traces of Lead, Mercury, Zinc, Arsenic and Zinc, Iron was found to have highest concentration 67.16 + 7.5 µg/g and Cadmium lowest concentration 0.4 + 0.03µg/g. GC-MS analysis of Gasca D herbal formulation revealed the presence of 14 biologically active compounds which include N-Formyl-beta-alanine, Paromomycin, 3,4-Altrosan, Benzamide, 1,3,4-Thiadiazol-2-amine, Carbamodithioic acid, Carbonic acid, alpha-D-Glucopyranoside, Ethyl isocyanide, 2-Propanesulfinic acid, Propanamide, 2-Butenenitrile, Dicyclopropyl carbinol, Isoxazolidine, 1,5-Hexadiene 10-Azido-1-decanethiol. Conclusion: The result indicates that the mean levels of toxic metals in Gasca D herbal formulation were below WHO permissible levels. Gasca D herbal formulation also contains various bioactive compounds that can have various medicinal application which can be used for the treatment of various diseases.

Based upon Maxwell's equations, it has long been established that oscillating electromagnetic (EM) fields incident upon a metal surface decay exponentially inside the conductor, leading to a virtual EM vacuum at sufficient depths. Magnetic resonance imaging (MRI) utilizes radiofrequency (r.f.) EM fields to produce images. Here we present the first visualization of a virtual EM vacuum inside a bulk metal strip by MRI, amongst several novel findings. We uncover unexpected MRI intensity patterns arising from two orthogonal pairs of faces of a metal strip, and derive formulae for their intensity ratios, revealing differing effective elemental volumes (voxels) underneath these faces. Further, we furnish chemical shift imaging (CSI) results that discriminate different faces (surfaces) of a metal block according to their distinct nuclear magnetic resonance (NMR) chemical shifts, which holds much promise for monitoring surface chemical reactions noninvasively. Bulk metals are ubiquitous, and MRI is a premier noninvasive diagnostic tool. Combining the two, the emerging field of bulk metal MRI can be expected to grow in importance. The fundamental nature of results presented here may impact bulk metal MRI and CSI across many fields.

The cutting-edge photovoltaic cells are an indispensable part of the ongoing progress of earth-friendly plans for daily life energy consumption. However, the continuous electrical demand that extends to the night time requires a prior deployment of efficient real-time storage systems. In this regard, metal-air batteries have presented themselves as the most suitable candidates for solar energy storage, combining extra lightweight with higher power outputs and promises of longer life cycles. Scientific research over non-precious functional catalysts has always been the milestone and still contributing significantly to exploring new advanced materials and moderating the cost of both complementary technologies. Metal-organic frameworks (MOFs) derived functional materials have found their way to the application as storage and conversion materials, owing to their structural variety, porous advantages, as well as the tunability and high reactivity. In this review, we provide a detailed overview of the latest progress of MOF-based materials operating in metal-air batteries and photovoltaic cells.

A useful and increasingly common additive manufacturing (AM) process is the selective laser melting (SLM) or direct metal laser sintering (DMLS) process. SLM/DMLS can produce full-density metal parts from difficult materials, but it tends to suffer from severe residual stresses introduced during processing. This limits the usefulness and applicability of the process, particularly in the fabrication of parts with delicate overhanging and protruding features. The purpose of this study was to examine the current insight and progress made toward understanding and eliminating the problem in overhanging and protruding structures. To accomplish this, a survey of literature was undertaken, focusing on process modeling (general, heat transfer, stress and distortion, and material models), direct process control (input and environmental control, hardware-in-the-loop monitoring, parameter optimization, and post-processing), experiment development (methods for evaluation, optical and mechanical process monitoring, imaging, and design-of-experiments), support structure optimization, and overhang feature design; approximately 140 published works were examined. The major findings of this study were that a small minority of the literature on SLM/DMLS deals explicitly with the overhanging stress problem, but some fundamental work has been done on the problem. Implications, needs, and potential future research directions are discussed in-depth in light of the present review.

Composite polymolecular separation membranes were prepared by combining multi-branched ZIF-L with high porosity electrospinning nanofibers PI. Meanwhile, PDA and PEI were introduced into the membrane in order to improve its adhesion. The new membrane is so called “PI@PDA@PEI/ZIF-L-4” composite membrane; compared with PI@PDA@PEI/ZIF-8 composite membrane, the new membrane’s filtration rates for heavy metal ions such as Cd2+, Cr3+ and Pb2+ were increased by 7.0%, 6.6% and 9.3%, respectively. Furthermore, the new membrane has a permeability up to 1,140.0 L·m−2·h−1·bar−1, and were presenting a very stable performances after four repeated uses. The separation mechanism of PI@PDA@PEI/ZIF-L composite membranes was further analyzed in order to provide a base support for producing separation membranes with high barrier rate and high flux.

The transferability of structure-property relationships for laser-pretreated metal adhesive joints to laser-pretreated metal – carbon fiber reinforced plastic (CFRP) bonds is investigated. Single-lap shear tests were performed on hybrid AW 6082-T6 – CFRP specimens pretreated with the same pulsed laser surface parameter sets on the metal surface as previously tested AW 6082-T6 – E320 metal adhesive joints. The fracture surfaces were characterized to determine the type of failure and elucidate differences and commonalities in the link between surface structures and single-lap shear strengths. Digital image analyses of the hybrid specimens fractured surfaces were used to quantify remaining CFRP fragments on the metallic joint side. The results indicate that high surface enlargements and the presence of undercut structures leads to single-lap shear strengths exceeding 40 MPa and 35 MPa for unaged and aged hybrid specimens respectively. While for the metal-polymer joints the trend from high strength to weakly bonded specimens was largely continuous with the degree of surface structuring, hybrid metal – CFRP joints exhibit a drastic drop in joint performance after aging if the laser-generated surface structures are less pronounced with low surface enlargements and crater depths. Surface features and hydrothermal aging determine whether the specimens fail cohesively or adhesively.

Abstract: Social media has become a vital tool in ensuring productivity among Undergraduates, as studies have shown an increased number of users globally. This study assessed the impact of social media usage on undergraduates’ academic performance and working memory. Participants from three different universities such as the University of Georgia (UG), Eastern European University (EEU), and Batumi State University (BSU) completed this study using online google forms. UG and EEU are in the capital city, and BSU is in Batumi City. The study questionnaires were approved by the institutional review board before the data collection. Descriptive analyses were assessed for all study populations, characteristics, frequencies, percentages, means, and standard deviations using Statistical Package for Social Science (SPSS Inc., Chicago, IL, version 25.0 for Windows) software. 41.3% were male students, as most of the participants were foreign students living and studying in Georgia. Male students had the risk of ‘conflict’ with families and friends because of social media. Female students are at increased risk of using social media as an ‘escape’ from negative feelings. 89.7% of students that perform physical activities, considering their academic workload had the risk of preoccupation complaints. 87.9% felt dissatisfied regularly because they wanted to spend more time on social media. Utilization of social media differed based on the characteristics of the participants such as age, gender, and geography. We observed the increase in prevalence of social media addiction, its effect on academic performance and working memory among undergraduate students.

This study examined the relationship among the three domains of executive function (EF; cognitive shifting, inhibitory control, and working memory) to test the applicability of the unity-diversity model in preschoolers using both behavioral and fNIRS approaches. Altogether 58 Chinese preschoolers (34 boys, 24 girls, Mage = 5.86 years, SD = 0.53, Age range = 4.83-6.67 years) were administered the Dimensional Card Change Sort (DCCS), go/no-go, and missing scan task. Their brain activations in the prefrontal cortex during the tasks were examined using fNIRS. First, the behavioral results indicated that the missing scan task scores (working memory) correlated with the DCCS (cognitive shifting) and go/no-go tasks (inhibitory control). But the latter two did not correlate with each other. Second, the fNIRS results demonstrated that the prefrontal activations during the working memory task correlated with those in the same regions during the cognitive shifting and inhibitory control tasks. Still, the latter two did not correlate. The behavioral and neuroimaging evidence jointly indicates that the unity-diversity model of EF does apply to Chinese preschoolers.

The effects of tyrosine on plasma response and cognition in aging are unknown. We assessed the dose-dependent response to tyrosine administration in older adults in both plasma tyrosine concentrations and working memory performance. In this double blind randomized cross-over trial 17 older adults (aged 60-75 years) received a single administration of 100, 150 or 200 mg/kg body weight of tyrosine. For comparison, 17 young adults (aged 18-35 years) received a dose of 150 mg/kg body weight of tyrosine. Tyrosine plasma concentrations were determined before and 90, 120, 150, 180, 210 and 240 minutes after tyrosine intake. Working memory was assessed using the N-back task at 90 minutes after tyrosine administration. Older adults showed a dose-dependent increase in plasma tyrosine concentrations (p<.001), and the plasma response was higher than for young adults with the same dose (p<.001). Load-dependent working memory performance decreased with higher doses of tyrosine (p=.048), especially in older adults with greater dose-dependent plasma tyrosine responses (p=.035). Our results show an age-related increase in plasma tyrosine response, which was associated with a dose-dependent decline in cognitive functioning in older adults.

Peptides, both natural and synthetic, are well suited for a wide range of purposes and offer versa-tile applications in different fields such as biocatalysts, injectable hydrogels, tumor treatment, and drug delivery. The rising prominence of therapeutic peptides encompasses anticancer, antiviral, antimicrobial, and anti-neurodegenerative properties. The metals Na, K, Mg, Ca, Fe, Mn, Co, Cu, Zn, and Mo are ten of the twenty elements that are considered essential for life. Crucial for under-standing the biological role of metals is the exploration of metal-bound proteins and peptides. Aside from essential metals, there are other, non-essential metals that also interact biologically, exhibiting either therapeutic or toxic effects. Irregularities in metal binding contribute to diseases like Alzheimer’s, neurodegenerative disorders, Wilson's, and Menkes disease. Certain metal com-plexes have potential applications as radiopharmaceuticals. The examination of these complexes was done by preforming UV-Vis, IR, EPR, NMR spectroscopy, and X-ray analysis.

We studied surface enhanced Raman spectra of amino acids D-alanine and DL-serine and their mixture on silver nanoisland films (SNF), immersed in phosphate buffer saline solution at millimolar amino acid concentrations. It is shown that the spectra from the amino acid solutions differ from the reference spectra for microcrystallites due to electrostatic orientation of amino acid zwitterions by the metal nanoisland film. Moreover, non-additive peaks are observed in the spectrum of the mixture of amino acids adsorbed on SNF, which means that intermolecular interactions between adsorbed amino acids are very significant. The results indicate the need for a thorough analysis of the Raman spectra from amino acid solutions in the presence of a nanostructured metal surface, and may also be of interest for studying molecular properties and intermolecular interactions.

In this work, a ZIF-67/MWCNTs/Nafion sensor platform was constructed based on the good adsorption capacity of ZIF-67, the electrical conductivity of multiwalled carbon nanotubes (MWCNTs) and the excellent chemical stability of Nafion for the detection of Cu2+ in water. Meanwhile, the modified materials were characterized by scanning electron microscopy (SEM), Transmission electron microscopy (TEM), BET specific surface area test, X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD) and Fourier transform infrared spectrometry (FT-IR). Cyclic voltammetry (CV), electrochemical impedance (EIS), and square wave solvation voltammetry (SWSV) electrochemical methods were used to perform applied test studies on ZIF-67/MWCNTs/Nafion/GCE. The results show that ZIF-67/MWCNTs/Nafion/GCE has high sensitivity (57.5 μA/μM) and a low limit of detection (15.0 nM) for the electrochemical detection of Cu2+ ions in an electrochemical sensing system. It has high adsorption selectivity for Cu2+, and the recovery of Cu2+ in real water reached 98.6%-103%. The modified electrode has good repeatability, reproducibility, anti-interference, and stability, which makes this sensing platform can be practically applied to the detection of domestic water.

Dendrite growth and parasitic reactions with liquid electrolyte are the two key factors that restrict the practical application of the lithium metal anode. Herein, a bis(benzene sulfonyl)imide based single-ion polymer artificial layer for lithium metal anode is successfully constructed, which is prepared via blending the as-prepared copolymer of lithiated 4, 4’-dicarboxyl bis(benzene sulfonyl)imide and 4,4’-diaminodiphenyl ether on the surface of lithium foil. This single-ion polymer artificial layer enables compact structure with unique continuous aggregated Li+ clusters, thus reducing the direct contact between lithium metal and electrolyte, and ensuring Li+ transport fast and homogeneous simultaneously. Based on which, the coulombic efficiency of the Li|Cu half-cell is effectively improved, and the cycle stability of the Li|Li symmetric cell can be prolonged from 160 h to 240 h. Surficial morphology and elemental valence analysis confirm that the bis(benzene sulfonyl)imide based single-ion polymer artificial layer effectively facilitates the Li+ uniform deposition and suppresses parasitic reactions between lithium metal anode and liquid electrolyte in the LFP|Li full-cell. This strategy provides a new perspective to achieve steady lithium metal anode, which can be a promising candidate in practical application.

The Attentional Control Theory (ACT) suggests that trait anxiety does not directly affect performance but may alter processing efficiency through the generation of compensatory strategies. However, the ACT does not describe the nature of these strategies, which could be reflective in nature. One hundred ten students (M = 20.12; SD = 2.10) completed questionnaires on trait anxiety, metacognitive beliefs, and emotion regulation strategies (ERS). They performed two working memory tasks: the digit span task from the WAIS-IV and an emotional n-back task. Anxiety, metacognitive beliefs, and maladaptive ERS were not linked to performance but were associated with longer response times. Additionally, participants using maladaptive ERS, such catastrophizing and rumination, made fewer negative commission errors and employed more strategies during the digit span. These findings support the role of the reflective level in influencing trait anxiety's impact on performance and emphasize considering metacognitive beliefs and maladaptive ERS for a comprehensive understanding of the ACT. Identifying these variables provides insights to optimize cognitive abilities and promote academic success.

As broiler farming facilities have become larger and more concentrated in response to external environmental changes, there is a possibility of increased concentrations of fine dust and aerosols inside these facilities due to enclosure. In particular, workers are exposed to high concentrations of organic particulate matter and harmful gases while performing their tasks, and as they age, they become more vulnerable to respiratory diseases. It is essential to directly monitor the concen-trations to which workers are exposed, along with the spatial distribution of aerosols inside broiler house. In this study, we analyzed the regional aerosol concentrations using passive samplers in commercial tunnel-ventilated broiler farms. Simultaneously, we employed active samplers at the height of the workers' breathing zones to monitor real-time aerosol concentrations by particle size along their work routes. Spatial aerosol concentrations generally increased from the inlet to the exhaust in the breathing zone. The average aerosol concentrations were TSP -1,042 µg/m³, PM-10 718 µg/m³, and PM-2.5 137 µg/m³. To analyze the workers' exposure environments, we categorized the tasks in the barn into Static work period (SWP) and Moving work period (MWP) based on video analysis. The results showed that during MWP, fine dust concentrations exceeded the standards by up to 214%. Particularly, during MWP, the concentrations were 1.74 times higher for TSP, 1.40 times higher for PM-10, and 1.22 times higher for PM-2.5 compared to SWP. It was observed that during the movement of workers, physical generation of particles around 10 µm, such as feces, feed, and bedding, occurred due to the movement of chicken, which influenced the aerosol concentration.

Since the outbreak of the Covid-19, working from home has become the norm for millions of workers worldwide. The current research focuses on the benefits and challenges of teleworking in the administrative sectors of greek healthcare units, with a view to harnessing the knowledge gained through experience, in order to create the frame for sustainable behaviors. Anyways, the implementation of teleworking requires complex and dynamic changes in technical and behavioral aspects. Therefore, a systematic review was also conducted to identify the relationships between telecommuting and organizational behavior, with the aim of achieving sustainable development in businesses. Moreover, an important positive aspect of telework that emerged from this literature review appears to create opportunities for potential direct or indirect linkages between telework and many SDGs areas, based on the fact that telework appears to be a community-friendly form of work. In summary, this research strongly suggests that leaders facilitate telecommuters to adopt green practices and volunteerism that can consequently contribute to the SDGs. However, in order to meet the challenges arising from unprecedented times, the leaders of the organizations will have to redesign their policies, while the states will have to focus on guaranteeing the rights and freedoms of the workers.

The present study examined mechanisms underlying memory deficits in patients with Parkinson disease (PD)and their associations with structural metrics. Nineteen PD and 22 matched controls underwent two memory experiments. In experiment 1 (delayed memory task), subjects were asked to remember an array of colored rectangles with varying memory set sizes [Low-Load (2 items), Low-Load with Distractor, &amp; High-Load (5 items)]. After a 7s delay period, they reported whether the orientation of any relevant figures had changed (test period). In experiment 2 (working memory task), memory arrays were presented in varying set sizes (2 to 6 items) with no distractors that were followed by a 2s delay period and subsequent test period. Brain MRI data were acquired to assess structural differences (volumes and cortical thickness) in brain areas related to attention, working memory storage, and episodic memory. Compared to controls, PD patients had lower memory capacity scores in all memory load conditions for experiment 1 (p &lt;0.021) whereas there were no group differences in any memory load conditions for experiment 2 (p&gt;0.06). In addition, PD patients had lower thickness in the left superior temporal gyrus (p=0.02). Lower thickness values in the left superior temporal gyrus were significant predictors of lower delayed memory performance in Low-Load and Low-Load with Distractor conditions (ps’&lt;0.044) and working memory performance of memory load conditions of 4 and 5 items (p’s&lt;0.012). The present findings suggest that PD patients may have intact working memory storage capacity but impaired attentional filtering and memory consolidation that may lead to lower delayed memory scores. Lower delayed memory in PD may partly be associated with lower cortical thickness in the left superior temporal gyrus.

Working memory (WM) is a brain system for short-term storage and manipulation of information and plays an important role in complex cognitive tasks. In the synaptic theory of WM memorized elements are stored in the form of short-term potentiated connections in a sample population of neurons. In this paper, we show that such populations can be formed due to the mechanisms of spike-timing-dependent plasticity (STDP) – the phase dependence associated with the ratio of the pulse times of the interacting neurons. We propose a WM model considering two types of plasticity: short-term plasticity and STDP. We have shown formation of neuronal clusters encoding items in the WM model, that can be formed by external stimulation of a group of neurons due to the mechanisms of STDP and hold and reactivated by short-term plasticity mechanisms. The dynamic formation of neuronal clusters instead of pre-formed clusters gives additional flexibility to the model.

Previous research has either neglected to consider misbehaviour or misconduct in the virtual workplace during the current COVID-19 pandemic or highlighted some challenges encountered with remote working or work from home but in isolation, e.g., misbehaviours or ethical concerns associated with improper use of technology when accessing clients’ confidential information, without understanding their aetiology and context in a holistic manner. This has impacted the ability of existing research in providing recommendations organisations can practically implement to improve the sustainability and productivity of the virtual workplace, especially as they seek to navigate the current pandemic and prepare for the global business environment in the next decade. Instead, this study, for the first time, proposes a novel holistic methodology to identify the aetiologies of ethical and performance challenges with focus to the Information Technology consulting sector, as well as developing a set of recommendations companies can adopt to manage such behavioural and productivity challenges. Thus, this study illustrates the key issues associated with remote working implemented to respond to the current COVID-19 pandemic, which mine not only the individual performance in an organisation but also its overall productivity, as well as suggests the main performance and reward management strategies that can be leveraged to mitigate them. Tailored strategies are described and discussed as referred to this industry to help in navigating a more unstable yet competitive market to manage the virtual employees’ misbehaviours in the workplace and drive growth for individuals and organisations alike.

Background: The concept of Quality of Work Life (QWL) has been built multidimensionally through social reproduction; it is impacted by the perceptions of each individual and by the relationship between workers and the work environment. Objective: to analyze the Work Process and QWL of assisting nurses in public health. Methods: Research in a critical paradigm, descriptive, exploratory with a qualitative approach. The population corresponds to Nurses who work in care work. Semi-structured guiding questions were applied and were analyzed with content analysis. Results: seven participants declared female; all Chilean; seven are young adults; six singles; only one has children, and one has a person dependent on her care; six are heads of household, and five receive help with housework. All have a nursing degree, five have a diploma, but none have a postgraduate. Work Process has three subcategories: work object, instrument, organization, and work conditions; the QWL category has six subcategories: definition and perception of QWL, QWL potentiating factors, QWL exhausting factors, QWL improvement strategies, the emotional burden associated with QWL, and Health problems. Conclusions: In this way, the lifestyle built by the assistance in the health area has repercussions on the quality of life and health in general.

In recent years, music education in Ibero-America has been losing ground within the school environment in favor of the development of curricular systems that benefit academic results in standardized tests. Despite this, several studies in the field of cognitive neurosciences have found evidence of great relevance and in which it can be observed how music education can favor cognitive development and performance in practically all stages of human development, with important results in language tasks, attention, and executive functions such as planning, inhibition, cognitive flexibility and working memory.

This study employed a deductive research approach and a survey strategy to assess risk perception and its influencing factors among construction workers in Malawi. Three specific construction hazards and their associated risks were selected. The hazards were ‘working at height (WAH) ‘manual handling of loads (MHL)’ and ‘heavy workload or intense pressure to be more productive (HWP)’. The study engaged multistage sampling of 376 subjects. Univariate analysis, factor analysis and multiple linear regressions were performed in order to determine the main influencing factors among the independent variables. The study established that workers were aware of risks posed by their work. They perceived the risk associated with WAH, MHL and HWP as very high (62.7%, = 8.80 ± 1.95); (48.5%, = 8.10 ± 2.38); (57.9%, = 8.49 ± 2.22) respectively. The study identified six factors as variables that showed significant effect on workers’ perception of risk (p < 0.05). These factors were “dreaded factor”, “avoidability and controllability”, “expert knowledge”, “personal knowledge”, education level and age. It is concluded that contractors in the Malawian construction industry should integrate analysis of behaviors and risk perception of the workers and other players to guide the identification of better health and safety interventions at their worksites.

With this article, impact of effluent mixed water with the quality of the Mansagar Lake has been established by evaluating the physico-chemical parameters and the heavy-metal contents experimentally. The process of calculating water quality and the metal pollution quality indices is also explained in brief with respect to selected sample locations and varied environmental conditions (Pre- and Post-Monsoon season). Distribution trends of Pearson‘s correlation factor have also been discussed to establish their relation among the physico-chemical parameters and the heavy-metal contents for varied environmental conditions. In the end, detailed discussion on observations made during this study and useful recommendations are also elaborated in details. With this article, we intend to present a document for better understanding of the water quality of this lake in view of futuristic management strategies to be adopted to maintain it heritage values.

Wastewater contaminated with antibiotics is a major environmental challenge. We developed here the green synthesis of bio-graphenes by using natural precursors (Xanthan, Chitosan, Boswellia, Tragacanth). The use of these precursors can act as templates to create 3D doped graphene structures with special morphology. Also, this method is a simple method for in-situ synthesis of doped graphenes. The elements present in the natural polymers (N) and other elements in the natural composition (P, S) are easily placed in the graphene structure and improve the catalytic activity due to the structural defects, surface charges, increased electron transfers, and the high absorption. In this mechanism, O2 dissolved in water absorbs onto the positive charged C in doped graphenes to create oxygenated radicals, which enables the degradation of antibiotic molecules. Light irradiation increases the amounts of radicals and rate of antibiotic removal. The results have shown that the hollow cubic Chitosan-derived graphene has shown the best performance due to the doping of N, S, and P. The Boswellia-derived grapheme shows the highest surface area, but lower catalytic performance, which indicates the more effective role of doping in the catalytic activity. The effect of oxygen and light were also studied to accelerate the degradation process.

: AlF3 has interesting electrophysical properties, due to which the material is promising for applications in supercapacitors, UV coatings with low refractive index, excimer laser mirrors, and photolithography. The formation of AlF3-based nano- and micro-wires can bring new functionalities to AlF3 material. AlF3 nanowires be used, for example, in functionally modified microprobes for scanning probe microscopy. In this work, we investigate the AlF3 samples obtained by the reaction of initial aluminum with aqueous hydrofluoric acid solution of different concentrations. All the samples were obtained under normal conditions. The morphology of the nanowire samples is studied by scanning electron microscopy. Quantitative energy-dispersive x-ray spectroscopy (EDS) spectra are obtained and analyzed with respect to the feedstock and each other.

: AlF3 has interesting electrophysical parameters, due to which the material is promising for applications in supercapacitors, UV coatings with low refractive index, excimer laser mirrors, and photolithography. The formation of AlF3-based nano- and micro-wires can bring new functionalities to AlF3 material. AlF3 nanowires be used, for example, in functionally modified microprobes for scanning probe microscopy. In this work, we investigate the AlF3 samples obtained by the reaction of initial aluminum with aqueous hydrofluoric acid solution of different concentrations. All the samples were obtained under normal conditions. The morphology of the nanowire samples is studied by scanning electron microscopy. Quantitative energy-dispersive x-ray spectroscopy (EDS) spectra are obtained and analyzed with respect to the feedstock and each other.

Antioxidants are molecules that neutralize free radicals. In general, the reaction mechanisms of antioxidants are well known. The main reaction mechanisms of antioxidants are electron transfer (ET), proton transfer (PT), H atom transfer (HAT) and radical adduction (RAF). The study of these mechanisms is helpful to understand how antioxidants control high free radical levels on the cell. There are many studies focused on determine the main mechanism of an antioxidant to neutralize a wide spectrum of radicals, mainly reactive oxygen species (ROS) type radicals. Most of these antioxidants are polyphenols type compounds. Some esters, amides and metal-antioxidants have shown antioxidant activity. There are few experimental and theoretical studies about the antioxidant reaction mechanism of the aforementioned compounds. In this work, we shown the reaction mechanism proposed of an amide and its metal-antioxidant counterpart. We show how the presence of the metal increase the electron transfer on polar media and the H transfer in non-polar media. Even though, esters and amides are non-polar compound, the scavenger activity is good for the metal-antioxidant compound in no-polar media

Using agronomic measures to remediate heavy metals on farmland is the main measure to achieve the safe utilization of crops. Investigating the effects of applying different fertilizers on the uptake, and translocation of Chromium (Cr) in maize and on the effectiveness of Cr in soil under Cr contamination of farmland is of great theoretical and practical significance to achieve the safe utilization of arable land and safe production of agricultural products. Under field trial conditions, different fertilizer types were set up, including ammonium sulfite, calcium-magnesium phosphate, and diammonium phosphate. locally formulated fertilizers (urea-ammonium phosphate-potassium chloride) serving as the control, with Biochar and conditioner PX5B were chosen to compare the impacts of each. To study the effects of different fertilizer types on maize yield, Cr content in the plant, bioconcentration factor, translocation factor and available content of Cr in the soil. The results showed that Compared with the formulated fertilizer, all treatments could improve pH, soil organic matter (SOM） and reduce the effective state of Cr content in the soil by 15.05% to 42.66%. While the Cr content of maize grains treated with biochar and conditioner PX5B was 0.80 mg·kg-1 and 0.88 mg·kg-1 with reduction rates of 39.95% and 33.83%, respectively. The Cr content of maize grains treated with various fertilizer treatments ranged from 0.82 to 1.32 mg·kg-1 with reduction rates of 0.75% to 38.19%. The Cr content of maize grains could be brought down to below the national food safety standards of China(1.0 mg·kg-1) using urea – calcium magnesium phosphate - potassium chloride, urea - diammonium phosphate - potassium chloride, ammonium sulfite – calcium magnesium phosphate - potassium chloride and ammonium sulfite, urea – calcium magnesium phosphate - potassium chloride and the two conditioner treatments. Among the different fertilizer treatments, the best fertilizer treatment for reducing the effective state Cr content of soil and the Cr content of maize grains was ammonium sulfite-calcium-magnesium-phosphate fertilizer-potassium chloride, which could achieve similar reductions as the two conditioners, while it also had a certain reduction effect on the Cr content in maize roots and straws and on the aboveground bioconcentration factor（BCF） and the root-to-straw translocation factor（PTF） of maize for Cr. Therefore, the combination of ammonium sulfite and calcium magnesium phosphate is the best fertilizer combination to block the absorption of Cr by maize and has some implications for the fertilization of farmland under acidic soil conditions of Cr contamination.

Heavy metals toxicity is a grave environmental issue in contemporary times. Phytoremediation is economic, effective and ecofriendly approach to decontaminate and remediate metal contaminated areas. Phenolic and Flavonoid content are important abiotic stress markers. The individual and combined impacts of toxiferous metals Arsenic (As), Cadmium (Cd) and (Copper) Cu were employed in recent studies to investigate their effect on Total flavonoids content (TFC) and total phenolic content (TPC) in various parts of Hydrocotyle umbellata L. to explore the role of plant in abating metal contamination. Folin- ciocalteu and AlCl 3 methods were used for investigating TPC and TFC respectively. Two-way ANOVA and CART model were employed for statistical analysis. Highest TPC was examined in decreasing order as leaf &amp; gt; stem &amp; gt; root in case of all the metals. Whereas highest TFC was found in all plant parts when subjected to As toxicity, and the lowest TFC was found in stem of the plant in respect to Cu toxicity. There was significant effect on TPC on plant part when subjected to Cu and As stress, but so significance was observed in plant part in case of Cd and combined metal stress. Treatment concentration had no significant effect on TPC when subjected to unique impact of all the three metals but had significant effect in case of combined metal stress. Similarly, in case of TFC no significant effect was recorded in case of plant part in all the stress types. But treatment amount has significant impact on Cd and combined metal stress. Metal type has significant effect on TPC and TFC. Whereas plant part has significant impact on TPC but non-significant values were observed on TFC in this case. This study epitomizes TPC and TFC in plants as effective and viable tool to pertain their role in phytoremediation against metal contamination. Therefore H. umbellata L. can be exerted for successful assemblage and decontamination of Cd, Cu and As in different plant parts.

Sequential reactions of aminoalkynes represent a powerful tool to easily assembly biologically important polyfunctionalized nitrogen heterocyclic scaffolds. Metal catalysis often plays a key role in terms of selectivity, efficiency, atom economy and green chemistry of these sequential approaches. This review examines the existing literature on the applications of reactions of aminoalkynes with carbonyls which are emerging for their synthetic potential. Aspect concerning the features of the starting reagents, the catalytic systems, alternative reaction conditions and the pathways as well as the possible intermediates are provided.

Abstract: Heavy metals (HMs) contamination is one of the main among abiotic factors affecting crop productivity and also threatens human health via consuming metal contaminated crops as a food source. Over the past few years, HMs have drawn a lot of attention due to their increased use for commercial purposes and their harmful effects on plants and other life forms, thus threatening human survival. However, in recent years, several methods have been adopted to combat the harsh effects of HMs. After phytohormones, use of mineral nutrients such as selenium (Se) in the prevention of HM stress has been explored by the researchers more recently. Selenium is an important micronutrient widely known for its antioxidant properties in both plants and animals. Exogenous Se inhibits metal uptake and its translocation and also improves the antioxidant system, thus imparts resistance to HM toxicity in plants. Moreover, Se also regulates the production of various osmolytes in cells that helps in developing cell osmolarity. Selenium also induces the production of different types of secondary metabolites (SMs) that are also involved in plant's secondary defense mechanisms to different stresses. Uptake of mineral nutrients is a vital process for plant growth and development, which is also positively correlated with Se under metalloid toxicity. However, in order to understand the exact mechanism of Se in HM tolerance, different metabolic processes stimulated by Se and their pathways need to be explored. Hence, this review focuses on the role of Se on nutritional status, antioxidants metabolism, interaction with phytohormones and its role in the regulation of various genes involved in Se induced HM tolerance. Thus, this study will help researchers in the future for the improvement of HM tolerance via Se application in plants.

Co-based catalysts have gained significant attention in recent years due to their excellent ability to activate C-H bonds and high selectivity towards olefins, despite being a non-noble and environmentally unfriendly metal. However, further improvements are necessary for practical utilization, particularly in terms of activity and anti-carbon deposition capacity. In this study, we synthesized Al₂O₃ nanorods with abundant pentacoordinated Al³⁺ (Al³⁺_penta) sites. The supported Co on the Al₂O₃ nanorod (Co/Al₂O₃-NR) exhibited higher selectivity (&gt;96% propylene selectivity) and stability (deactivation rate 0.15 h^-1), compared to Co supported on an Al₂O₃ nanosheet with fewer pentacoordinated Al³⁺ sites. Various characterizations confirmed that Co(II) mainly exists as CoAl₂O₄ rather than Co₃O₄ in the form of Co/Al₂O₃-NR, which inhibits the reduction of Co(II) to Co0 and improves catalyst stability accordingly.

Metal halide perovskites (MHPs), in particular lead-based halide perovskites have earned a recognized fame in several fields for their outstanding optoelectronics properties including direct generation of free charge carriers, optimal ambipolar charge carrier transport properties, high absorption coefficient, point-defect tolerance, and compositional versatility. Nowadays, this class of materials represents a real and promising alternative of silica for the photovoltaic technologies. This worthy success led to a growing interest in the exploration of MHP materials in other hot research fields such as the solar-driven photocatalytic water splitting towards hydrogen production, CO2 reduction to CO and CH4, useful organic reactions such as organic synthesis (formation of C-C, C-N, and C-O bonds), and pollutants and dye degradation. Nevertheless, many of these perovskite materials showed air and moisture instability problems that considerably hinder their practical application for photocatalytic water splitting and photodegradation of CO2. Moreover, if the chemical instability is a problem that can be in part mitigated by the optimization of the lattice structure, the presence of lead represents a real problem for the practical application of these type of materials in commercial devices. To successfully overcome this problem, lead-free metal halide perovskites (LFMHPs) have gained increasing interest thanks to their promising optoelectronic properties, comparable to lead-based materials, and their eco-friendly nature. Among all the lead-free perovskite alternatives, this mini review will focus the attention on the bismuth-based perovskites and perovskite derivatives with specific focus on solar-driven photocatalysis application for H2 evolution.

Heavy metals contamination in groundwater often occurs in various industrial processes. Stud-ies have confirmed that polysulfide could reduce hexavalent chromium to trivalent chromium, achieving the effect of in-situ stabilization. For other heavy metals contamination in groundwa-ter, whether polysulfide also had a stabilizing ability to achieve in-situ remediation. This re-search focused on heavy metals except for chromium that often contaminated in groundwater, including lead, nickel, zinc, copper, and cadmium to explore the feasibility of using calcium polysulfide (CaSx) as an in-situ stabilization technology for these heavy metals contamination groundwater. Results showed that CaSx had a great removal efficiency for heavy metals lead, nickel, zinc, copper, and cadmium. However, for nickel, zinc, copper and cadmium, when CaSx was added excessively, complexes would be formed, causing the result of re-dissolve and this would also reduce the removal efficiency. Since it is difficult to accurately control the dosage of agents for in-situ groundwater remediation, the concentration of re-dissolved nickel, zinc, cop-per, and cadmium may not be able to meet the groundwater control standards. CaSx had high lead removal efficiency, and it would not cause re-dissolution due to excessive CaSx dosing. CaSx can be used as an in-situ stabilization technique for lead contaminated groundwater.

The purpose of this study was to arrange a green roof on a sheet metal house to achieve winter heat preservation and summer thermal insulation using different plants and soil media, and to maintain the advantage of cost-saving and quick installation of sheet metal houses. In terms of the research method, the roof insulation, heat preservation and plant growth index were tested. Plants were grown in 10 container-type green roofs on the sheet metal house roof, and the physical environment of the building was monitored for one year. Five containers of commercially-available culture soil and five containers of sustainable composite were used as the media for growing five kinds of plants, respectively. The control group only had a sheet metal house roof. There were 11 experimental modules for testing whether the green roofs had thermal insulation, heat preservation and plant growth effects on a general sheet metal house. The results showed that, regarding the thermal insulation benefit assessment, the Sedum acre cv. robustum of green roof Groups B to D caused the temperature to be 38.29°C lower than the surface of the simple sheet metal house roof in August, showing a temperature difference of 54%.

This review analyzes the preparation and characterization of metal organic frameworks (MOFs) and their application as photocatalysts for water purification. The study begins by highlighting the problem of water scarcity and the different solutions for purification, including photocatalysis with semiconductors such as MOFs. It also describes the different methodologies that can be used for the synthesis of MOFs, paying attention to the purification and activation steps. The characterization of MOFs and the different approaches that can be followed to learn on the photocatalytic processes are also detailed. Finally, the work reviews literature focused on the degradation of contaminants from water using MOF-based photocatalysts under light irradiation.

The Anderson insulating states in Au nanoparticle assembly are identified and studied under the application of magnetic fields and gate voltages. When the inter-nanoparticle tunneling resistance is smaller than the quantum resistance, the system showing zero Mott gap can be insulating at very low temperature. In contrast to Mott insulators, Anderson insulators exhibit great negative magnetoresistance, inferring charge de-localization in a strong magnetic field. When probed by the electrodes spaced by ~200 nm, they also exhibit interesting gate-modulated current similar to the multi-dot single electron transistors. These results reveal the formation of charge puddles due to interplay of disorder and quantum interference at low temperatures.

Intermetallic compounds are increasingly being expected to utilize in tribological environments, but to date the works are hindered by insufficient ductility at low and medium temperature. This paper presents a novel multiphase intermetallic alloy with the chemical composition of Mo-40Ni-13Si (at.%). Microstructure characterization reveals that a certain amount of ductile Mo phases formed during the solidification process of ternary Mo-Ni-Si alloy melt, which is undoubtedly beneficial to the ductility improvement of intermetallic alloy. Tribological properties of the designed alloy, including wear resistance, friction coefficient and metallic tribological compatibility, were evaluated under dry sliding wear test conditions at room temperature. Results suggested that the multiphase alloy possesses an excellent property for room-temperature wear applications, which is attributed to the unique microstructural features and thereby good combination in hardness and ductility. The corresponding wear mechanism is also reported by observing the worn surface, subsurface and wear debris of alloy, which to be found is soft abrasive wear.

To accurately predict the matching relationships between the various components and the engine performance in the whole aero-engine environment, this study introduces a two-dimensional throughflow simulation method for the whole aero-engine. This method is based on individual throughflow solvers for the turbo-machinery and the combustor. It establishes a throughflow simulation model for the whole engine by integrating with the compressor-turbine co-operating equations and boundary conditions. The turbo-machinery throughflow solver employs a circumferentially averaged form of the time-dependent Navier-Stokes equations (N-S) as the governing equation. The combustor solver uses the Reynolds Average Navier-Stokes (RANS) method to solve flow and chemical reaction processes by constructing turbulence, combustion, and radiation models. The accuracy of the component solver is validated using Pratt &amp; Whitney’s three-stage axial compressor (P&amp;W3S1) and General Electric’s high-pressure turbine (GE-EEE HPT), and the predicted results are consistent with the experimental data. Finally, the developed throughflow method is applied to simulate the throttling characteristics of the WZ-X turboshaft engine. The results predicted by the throughflow program are consistent with the GasTurb calculations, including the trends of shaft power delivered, specific fuel consumption (SFC), inlet airflow, and total pressure ratio of the compressor. The developed method to perform throughflow simulation of the whole aero-engine eliminates the dependence on a general component map. It can quickly obtain the meridian flow field parameters and overall engine characteristics, which is expected to guide the design and modification of the engine in the future.

This study examines the effects of working capital management strategies on firm’s financial performance of Indian cement companies using 11-year (2010-2020) financial data of 31 companies listed in Bombay Stock Exchange. It is intended to find out whether the strategies made by finance managers with respect to the components of working capital such as average receivable period, inventory conversion period, average payment period and cash conversion cycle, etc. affects the firm’s performances individually and in total. The results of Pearson’s correlation coefficient and random effect regression model shows that there exists a negative relationship between financial performance measured in terms of return on assets (ROA) and inventory turnover period (ITP) as well as accounts payable period (APP), whereas firm’s performance is not significantly affected by accounts receivable period (ARP) and cash conversion cycle (CCC). Similarly, it has been observed that the liquidity measures such as current ratio (CR) and quick ratio (QR) have a significant positive association with ROA. Moreover, the size of the firms and leverage are inversely related to ROA but the age of the firms is not significantly affecting their financial performances. Hence, it can be concluded that how an organisation designs its working capital strategy do have an impact on its performances.

Manufactured sand and natural sand have great differences in terms of physical properties, chemical composition, and so on. In the mix ratio design of manufactured sand concrete, the traditional common concrete ratio cannot be used. The water-cement ratio playing a crucial role in the mix ratio design. The optimum water-cement ratio can not only improve concrete performance, it can also reduce cement consumption and costs. The present study examines the working performance indicators and mechanical performance indicators of manufactured sand concrete using Fujian granite with three strength grades (C35, C40 and C50) at different water-cement ratios. The impact of water-cement ratio on the operational and mechanical performance of manufactured sand concrete with different strength grades is analyzed and summarized. Revised sentence: The findings suggest that the workability of Fujian granite concrete is directly influenced by the water-cement ratio. Additionally, the water-cement ratio indirectly affects the mechanical properties of manufactured sand concrete. Finally, when changing the water-cement ratio, cube compressive strength, splitting tensile strength and bending strength exhibit similar trends. The optimal water-cement ratio for C35 concrete is determined to be 0.39, considering the workability and mechanical properties of Fujian granite manufactured sand concrete. Similarly, the optimal water-cement ratio for C40 concrete is 0.34, while for C50 concrete it is 0.32.

In this paper, through high-temperature tensile tests of 55NiCrMoV7 steel, the high-temperature fracture behavior, microstructure evolution and carbide distribution characteristics of both thermal-mechanical coupling zone (fracture zone) and thermal stress zone (clamping zone) at different temperatures were studied. Intrinsic relationship between high temperature fracture and carbides types, distribution and size were revealed and evolution mechanism of microstructure near cracks in 55NiCrMoV7 hot-working die steel during high temperature deformation was clarified. Samples were stretched at different temperatures from 25 °C to 700 °C, and microscopic examinations were carried out by using SEM and TEM. The results showed that: With the increase of temperature, tensile strength and yield strength decreased, elongation and reduction of area increased, and fracture mode changed from brittle fracture to ductile fracture by transition temperature at about 400℃. During high temperature deformation, the grain dislocation density decreased, the tempered martensite decomposed, recovered, recrystallized, and then grain grew. M7C3 and M23C6 carbides precipitated and grew along the grain boundary, and a small amount of fine granular MC carbides were dispersed in the grain. The work done by the external force on the deformation zone would cause the temperature of it to be higher than tensile temperature, which provides thermodynamic conditions for the re-dissolution of small carbides near the fracture zone and the grain growth of large carbides, resulting in the decrease of small carbides and increase of large carbides in thermal-mechanical coupling zone.

Economic expedience of waste heat recovery systems (WHRS), especially for low temperature difference applications, is often questionable due to high capital investments and long pay-back periods. By its simple design isobaric expansion (IE) machines could provide a viable pathway to utilize otherwise unprofitable waste heat streams for power generation and particularly for pumping liquids and compression of gases. Different engine configurations are presented and discussed. A new method of modelling and calculation of the IE process and efficiency is used on IE cycles with various pure and mixtures as a working fluid. Some interesting cases are presented. It is shown in this paper, that the simplest non-regenerative IE engines are efficient at low temperature differences between a heat source and heat sink. Efficiency of non-regenerative IE process with pure working fluid can be very high approaching Carnot efficiency at low pressure and heat source/heat sink temperature differences. Regeneration permits to increase efficiency of the IE-cycle to some extent. Application of mixed working fluids in combination with regeneration permits to significantly increase the range of high efficiencies to much larger temperature and pressure differences.

With increased participation in telework expected to continue, to support emerging hybrid work models in the aftermath of the Covid-19, it is important to consider the long-term impact this practice could have on sustainability outcomes. This paper describes a systematic review of 113 academic journal articles and identifies associations between telework and sustainability, explored by previous researchers. Those associations were categorized and discussed, based on their contributions to different United Nations Social Development Goals. Most of research was found to focus on countries classified as having a very high human development index status, and regions with a low, medium or high human development index, largely ignored. The SWOT matrix technique was used to illustrate the strengths and weaknesses identified in the current literature as well as threats and opportunities for future work. This can help to ensure policy coherence and that strategies to promote one outcome, such as economic productivity improvements, does not undermine another, such as improved health. Practical implications and potential research opportunities were identified across a range of SDG impact areas, including good health and well-being, gender equality, reduced inequality, climate mitigation, sustainable cities and resilient communities. On the whole, our impression is that increased rates of telework present an important opportunity to improve sustainability outcomes, however, it will be important that integrated and holistic policy is developed that mitigates key risks.

Learning disorders (LD) are diagnosed in children impaired in the academic skills of reading, writing and/or mathematics. Children with LD usually show a slower resting-state electroencephalogram (EEG), with EEG patterns corresponding to a neurodevelopmental lag. LD-children also show a consistent cognitive impairment in working memory (WM), including an abnormal task-related EEG with an overall slower EEG activity of more delta and theta power, and less gamma activity in posterior sites; task-related EEG patterns considered indices of an inefficient neural resource management. Neurofeedback (NFB) treatments aimed at normalizing the resting-state EEG of LD-children have shown improvements in cognitive-behavioral indices and diminished EEG abnormalities. Given the typical findings of a WM impairment in LD-children; we aimed to explore the effects of a NFB treatment in the WM of children with LD, by analyzing the WM-related EEG power-spectrum. We recruited 18 children with LD (8-10 years old). They performed a Sternberg-type WM-task synchronized with an EEG of 19 leads (10-20 system) twice in pre-post treatment conditions. They went through either 30 sessions of a NFB treatment (NFB-group, n= 10); or through 30 sessions of a placebo-sham treatment (Sham-group, n= 8). We analyzed the before-after treatment group differences for the behavioral performance and the WM-related power-spectrum. The NFB group showed faster response times in the WM-task post-treatment. They also showed an increased gamma power at posterior sites and a decreased beta power. We explain these findings in terms of NFB improving the maintenance of memory representations coupled with a reduction of anxiety.

The aim of study was to assess empirical model of factors determining the attitude towards learning communicative competences among nurses participating in the program of speciality training courses. A research by method a cross-sectional study. A representative group of the 1,010 Polish registered nurses that took part in the postgraduate education course answered self-report survey (three instruments: NEO-PI-R questionnaire, Communication Skills Attitude Scale (CSAS) and Empathy Understanding Questionnaire of other people (KRE II)) between beginning of March to the end of May 2018, which was evaluated using path analysis. The research results conducted confirmed the soundness of the created theoretical model (χ2 = 0.278, P = 0.598, RMSEA &lt;0.05). It was proved that learning communicative competences in nurses is determined with factors such as professional experience, emphatic tendencies and the intensity of agreeableness, whereby these factors are bound with each other creating a homogeneous network. The developed model demonstrated that the skills can be shaped most effectively on an individual attitude based on positive mentoring in work environment..

The indole nucleus is an important element of many natural and synthetic molecules with significant biological activity. Nonetheless, the co-presence of transitional metals in organic scaffold may represent an important factor in the development of effective medicinal agents. This review covers some of the relevant and recent achievements in the biological, chemical and pharmacological activity of important indole-based metal complexes in the area of drug discovery.