A scientific consensus is emerging on the benefits of dc distribution in medium voltage power systems of ships and cities. At least 50% space savings and increased power transfer capacity are estimated with enhanced voltage dc operation of electric cables. The goal of this research is to contribute to developing the empirical knowledge on the insulation performance in order to validate the feasibility of such anticipated gains of dc versus ac, and to determine the comparative impact of different operational conditions from a component engineering point of view. The partial discharge (PD) activity in cables is measured under ac and dc conditions as an indicator of insulation performance. Specifically, PDs in defects at the semicon-insulation interface are studied in terms of inception voltage, repetition rate and discharge magnitude. Empirical understanding is drawn for operating voltage and frequency dependence of the discharge behavior in such voids in the range of 10 to 20\,kV and 0 to 0.1\,Hz, respectively. The change in PD activity with void evolution is explored.

Temper embrittlement is a major challenge encountered during the heat treatment of high-performance steels for large forgings. This study investigates the microstructural evolution and mechanical properties of Cr-Ni-Mo-V thick-walled steel, designed for new large forgings with a tensile strength of 1500 MPa, under different tempering cooling rates. Optical microscopy (OM), scanning electron microscopy (SEM), and electron backscatter diffraction (EBSD) were employed to analyze the microstructural features. The results demonstrate that the embrittlement occurring during air cooling after tempering is attributed to the concentration of impurities near Fe3C at the grain boundaries. The low-temperature impact toughness at -40°C after water quenching reaches 29 J due to the accelerated cooling rate during tempering, which slows down the diffusion of impurity elements towards the grain boundaries, resulting in reduced concentration and dislocation density, and increased stability of the grain boundaries, thereby enhancing toughness. the bainite content decreases and the interface between martensite and bainite undergoes changes after water quenching during tempering. These alterations influence the crack propagation direction within the two-phase microstructure, further modifying the toughness. These findings contribute to the understanding of temper embrittlement and provide valuable guidance for optimizing heat treatment processes to enhance the performance of high-performance steels in large forgings.

Building a new power plant to address the growing demand for power due to population concentration in the metropolitan area is one of the world's major concerns. However, since a large power plant can not be located around the city due to burden of economic cost, building power plant outside metropolitan and cities is necessary. Therefore, new power generation facilities are promoting policies to provide distributed generator(DG) with a small capacity relatively near the metropolitan. When the DG (photovoltaic, wind farm, etc.) is connected with the grid using medium voltage direct current (MVDC) system, voltage sourced converter(VSC) should supply reactive power to the grid, because of fault ride through(FRT) operation in grid fault. If the voltage drop is severe, the converter should be disconnected from the grid immediately without supplying the reactive power, resulting in a considerable economic loss. In general, superconducting fault current limiter(SFCL) is introduced as a measure to enhance FRT capability. In this paper, we use trigger type SFCL which protects superconducting element and reduces low voltage. On the other hand, the active power unbalance of the DC-link and the DC voltage rise due to the reactive power supply of the grid-side converter. The rise of the DC voltage causes the P (active power), Q (reactive power) control of the converter to deviate, causing malfunction and damage of the DC equipment. Therefore, the rise of the DC voltage must be prevented. In this paper, we consider the suppression the DC voltage rising caused by the FRT operation through the active power tracking control (APTC).

Background: Previous in vitro and in vivo studies have demonstrated that storage of cooked rice at 4 °C for 24 h and reheating to 65 °C significantly reduced starch digestibility and postprandial glycaemic responses. Moreover, the effect was greater for parboiled rice compared to other rice varieties commonly consumed in New Zealand. This study aimed to evaluate consumer preferences of related sensory attributes and consumer acceptability of several rice varieties freshly cooked or reheated. Method: Sixty-four consumers volunteered and recorded on Visual Analoge Scales their preference and acceptability of freshly prepared or cold-stored and reheated medium grain white, medium grain brown and parboiled rice. Results: All six rice samples were accepted by participants (average 54%). Reheated parboiled rice and reheated medium grain brown rice were both accepted by participants as a preferred staple meal compared to other rice samples. Among all rice samples, the sweetness and the flavour of freshly cooked warm medium-grain white rice were less preferred (scored 42.1% and 45.0% respectively) compared with other samples (P = 0.05). Participants who prepared and consumed brown rice at home regularly (more than 10 times per month), preferred the reheated brown rice (73.8% (67.4, 80.2)) and reheated parboiled rice (74.3% (67.9, 80.7)) (P < 0.001). Conclusions: It is suggested that reheated parboiled rice, with the lowest starch digestibility and glycaemic impact (both in vitro glucose release and in vivo glucose response) could be accepted as a healthier alternative for the daily staple meal.

Maxwell equation for the electric field has been solved for any medium by suggesting the wavenumber and angular frequency be complex quantities. This accounts for the field decay by interaction with the medium.This expression for the time and special decay of the electric field in a medium is used to construct a new wave function sensitive to the medium physical properties. This new wave function, unlike the conventional one, differentiates between a beam of particles in a vacuum and that enters a medium which is an attenuated due to the scattering effect.Another expression for time decaying electric field was obtained using Newton’s laws for frictional medium. This expression shows that the electric field diminishes due to friction.Fortunately, this time decaying part of the electric field is typical to that derived from Maxwell’s equations. Finally, a new Schrodinger equation sensitive to the medium properties was derived. This equation, fortunately, describes some scattering processes for Protein scattering, scattering of x-rays, opto-acoustic phonons, and Raman scattering for some materials successfully .

A linear stability analysis of the parallel uniform flow in a horizontal channel with open upper boundary is carried out. The lower boundary is considered as an impermeable isothermal wall, while the open upper boundary is subject to a uniform heat flux and it is exposed to an external horizontal fluid stream driving the flow. An eigenvalue problem is obtained for the two-dimensional transverse modes of perturbation. The study of the analytical dispersion relation leads to the conditions for the onset of convective instability as well as to the determination of the parametric threshold for the transition to absolute instability. The results are generalised to the case of three-dimensional perturbations.

Blockchain technology (BCT) has the potential for sustainable development, enhancing business efficiency, reducing costs, and strengthening data security. Despite its potential, adoption among small and medium-sized enterprises (SMEs) is low due to the need for significant changes in technology infrastructure and the challenge of interoperability. A cross-sectional survey was done with 226 Hong Kong SMEs. The PLS-SEM results highlighted favorable transformation conditions as the most critical factor for SMEs considering the adoption of BCT. These conditions address both internal and external readiness for adopting the disruptive strategy. Other contributing factors to BCT adoption include trust in BCT developers, perceived usefulness and ease of use, government support, and perceived security. The research results contributed to the literature on disruptive technology acceptance, adoption, transformation conditions, technology readiness, and SMEs’ technology adoption. Government-supported policies and initiatives can promote BCT adoption, including educational programs, case studies, and resources for readiness. Financial support and regulatory frameworks can further encourage adoption. BCT developers can demonstrate the value of their systems, effectively communicate potential ROI and cost savings, and provide user-friendly interfaces to increase SMEs’ intention to adopt BCT.

Natural astaxanthin is a precious substance obtained from some organisms such as microalgae. This plant has many benefits for humans, so research into its cost-effective and economical production has recently increased. For this purpose, some methods such as the use of different culture media, gene engineering, different stresses, nanoparticles, bio acids, and phytohormones are important. Accordingly, this review study was conducted to demonstrate the effect of the factors mentioned above for the high production of astaxanthin in microalgae, especially Haematococcus pluvialis (H.p).

The X-ray emission from a supernova remnant (SNR) is a powerful diagnostic of the state of the shocked plasma, and, given a model, can be used to determine the energy of the explosion, the age of the SNR and the density of the surrounding medium. Observed properties are shock radius, electron temperature (kTe) and emission measure (EM) of the shocked-gas. The standard and XSPEC definitions have an important difference. The XSPEC definition is superior for SNRs, which have components with low hydrogen abundance. SNR model calculations are based on hydrodynamic solutions for fluid variables of density, pressure and velocity. The relations between fluid variables and kTe or EM depend on composition, ionization state and electron-ion temperature ratio (Te/TI). Here the effects of composition, ionization and Te/TI on standard and on XSPEC versions of kTe and EM are investigated.

We explore the deflection angle in the framework of improved Schwarzschild Black hole utilizing the most advance geometrical path adopted by Gibbon-Werner. To investigate deflection angle of the photon ray by weak gravitational lensing for this black hole, we derive the optical curvature and perform the application of Gauss-Bonnet theorem on the optical metric. Moreover, we study the impacts of the plasma medium in context of the weak gravitational lensing in relate to this black hole. Further, we also study the graphical analysis of the deflection angle in both the plasma and non-plasma mediums. Also, we find the rigorous bound base upon the greybody factor for improved Schwarzschild black hole. A while later, we contrast our conclusions about deflection angle with the deflection angles of Schwarzschild black hole within plasma and non-plasma mediums.

An initial-boundary value problem is considered for one-dimensional isothermal equations of the dynamics of viscous compressible multicomponent media, which are a generalization of the Navier--Stokes equations. We prove the stabilization of the solution to the initial-boundary value problem while the time tends to infinity, without simplifying assumptions for the structure of the viscosity matrix, except for the standard physical requirements of symmetry and positive definitenes.

In recent decades, particularly intense changes have occurred in Spanish urban areas. This is the result of demographic and urbanizing transformations that have led to a change in the city model. The predominance of compact forms has been replaced by the growing prominence of urban sprawl. Structures are now more extensive, characterized, in turn, by fragmentation and notable consumption of land in the peripheries. In medium-sized cities, the municipalities bordering the central cities have concentrated the processes of suburbanization and periurbanization. This paper addresses the process of change for 34 cities and their urban areas located in inland Spain. A proposal is made for the delimitation and characterization of urban areas, taking the municipality as the unit of analysis. At the methodological level, six variables are used, analyzed by means of multicriteria statistical techniques combined with the use of GIS tools. An Urban Transformation Index (ITU) has been developed that synthesizes urbanizing, demographic and socioeconomic dynamics. In the territorial area, the 20-minute isochrone is used as a reference. In the temporal domain, the period of analysis addresses the events of the first two decades of the twenty-first century.

The accumulation of process waste in the production line causes fluctuations, bottlenecks, and increased inventory in workstations disrupting process flow. In this paper, the aim is the use a simulated value stream mapping (SVSM) as a lean assessment tool for decision-making in the continuous improvement process to influence and provide consideration and consistency on productivity improvement in the production system. The proposed methodology applied discrete event simulation for production process operations improvement to eliminate non-value adding times and provides good quality products at the lowest cost and highest efficiency. The results are the analysis of the current state of the production system in a South African truck manufacturing industry small and medium enterprise (SMEs) as a potential solution for the production system future state. The identified non-value adding times in the 6 most critical workstations was eliminated by SVSM which resulted in a productivity improvement of 4%, most importantly bringing the productivity to 95% and total cycle time improvement to 451 for small units and 466 for large units. The results proposed combined VSM and Simulation techniques which enhance the LEAN application by DES to increase productivity and performance improvement to remain competitive in the global economy.

Malassezia species are fastidious and slow-growing yeasts whose isolation from polymicrobial samples is hampered by fast-growing microorganisms. Malassezia selective culture media are needed because Malassezia are resistant to cycloheximide, but some fungi, including the chief human commensal Candida albicans resist to this compound. This study aimed to test whether the macrolide rapamycin could be used in combination with cycloheximide to develop a Malassezia-selective culture medium. Rapamycin susceptibility testing was performed via microdilution assays in modified Dixon against M. furfur and five Candida spp. The MIC was the lowest concentration producing 90% growth inhibition. Rapamycin medium ± cycloheximide 500 mg/L was also added to FastFung solid and yeast suspensions were inoculated and incubated for 72h. Rapamycin MICs against Candida spp. ranged from 0.5 to 2 mg/L, except for C. krusei whose MIC was &gt;32 mg/L. M. furfur stains were rapamycin resistant. Rapamycin and cycloheximide supplementation of the FastFung medium effectively inhibited the growth of non-Malassezia yeast, including the cycloheximide-resistant C. albicans and C. tropicalis. Based on our findings, we recommend using this “MalaSelect” medium for Malassezia isolation and culture from polymicrobial samples.

Medium-carbon steel is commonly used for the rail, wire ropes, tire cord, cold heading, forging steels, cold finished steel bars, machinable steel and so on. Its fatigue behavior analysis and fatigue life estimation play an important role in the machinery industry. In this paper, the estimation of fatigue life of medium-carbon steel with different surface roughness using established S-N and P-S-N curves is presented. To estimate the fatigue life, the effect of the average surface roughness on the fatigue life of medium-carbon steel has been investigated using 75 fatigue tests in three groups with average surface roughness (Ra): 0.4μm, 0.8μm, and 1.6μm respectively. S-N curves and P-S-N curves have been established based on the fatigue tests. The fatigue life of medium-carbon steel is then estimated based on Tanaka-Mura crack initiation life model, the crack propagation life model using Paris law, and material constants of the S-N curves. 6 more fatigue tests have been conducted to validate the presented fatigue life estimation formulation. The experimental results have shown that the presented model could estimate well the mean fatigue life of medium-carbon steel with different surface roughness

Propagation of electromagnetic (EM) waves inside and on the surface of the human body is the subject of active research in area of biomedical applications. This research area is the basis for wireless monitoring of biological object parameters and characteristics. Much attention has been paid to radio-frequency identification systems, which are intended for biomedical applications. Solutions to the following problems are crucial to achieve the stated goals in the area of wireless monitoring: EM wave propagation inside regular and multilayer biological media, through the interface between different media, and on-body surface wave propagation. The biological object monitoring is based on a consideration of the followingprocesses: a) propagation of the EM wave in a biological medium considered as the dielectric with a high dielectric permittivity and substantial conductivity; b) penetration of the EM wave through the biological medium–air interface (wave reflection and refraction); c) propagation of the EM wave in a multi-layer biological medium; d) propagation of the EM wave along the plane or curved surface of biological objects.

Sperm capacitation involves biochemical and physiological changes that enable sperm to fertilize the oocyte. It can be induced in vitro under controlled conditions that simulate the environment of the oviduct. While extensively studied in mammals, its approach in lizards remains absent. Understanding the mechanisms that facilitate reproduction is essential for advancing the implementation of assisted reproductive technologies in this group. Fifteen males of Sceloporus torquatus were collected during the early stage of the reproductive season. The sperm were isolated from the seminal plasma and then diluted up to a volume of 150 μl using BWW medium to incubate with 5% CO2 at 30 °C for a maximum duration of 3 hours. A fraction was retrieved hourly for ongoing sperm assessment. We found that total motility is maintained up to 2 hours post-incubation, after which it decreased. However, sperm viability remained constant. From that moment on, we observed a transition to a deeper and less symmetrical flagellar bending in many spermatozoa. The chlortetracycline assay indicated a reduction in the percentage of sperm showing the F pattern and an increase in those exhibiting the capacitated (B) and reactive (RA) patterns, accompanied by an elevation in the percentage of damaged acrosomes as revealed by the lectin binding assay. In mammals, these changes are often associated with sperm capacitation. These observations support the notion that this process may also occur in saurian.

The paper presents the results of modeling the problem of injecting liquid sulfur dioxide into a porous reservoir initially saturated with methane and ice. The model presented in the paper assumes the formation of three different regions, namely, the near one, saturated with liquid SO2 and its hydrate; the far one, containing methane and ice, and the intermediate one, saturated with methane and water. The effects of various parameters of the porous medium and injected SO2 on the nature of the course of the hydrate formation process have been studied. It is shown that with a decrease in reservoir permeability or injection pressure, the length of the intermediate region decreases, which in the limiting case means the formation of SO2 hydrate in the mode without the formation of an extended region saturated with methane and water. It is shown that such a regime is also typical for the case of high initial injection pressures, as well as low values of the initial reservoir temperature and injection temperature.

The study of a flexible body immersed in a flowing medium is one of best way to find its aerodynamic shape. This Letter revisited the problem first studied by Alben, Shelley and Zhang (Nature 420, 479-481, 2002). The aerodynamic shape of the fibre is found by simpler approach and universal drag scaling laws of the flexible fibre in flowing medium are proposed by using dimensional analysis. The Alben scaling laws is being generalized and confirmed to be universal. Our study show that the Alben number is a measurement of maximum curvature of the fibre forced by dynamic pressure. A complete Maple code is provided for finding aerodynamic shape of the fibre in the flowing medium.

Candida auris is an emerging multidrug resistant yeast causing nosocomial infections and associated with high mortality in immunocompromised patients. Rapid identification and characterisation is necessary for its diagnosis and containing spread. In this study, we present a selective culture medium for all C. auris clades. This medium is sensitive with a limit of detection of 102 CFU/ml. The 100% specificity of SCA (Specific C. auris) medium is confirmed on a set of 134 Candida strains, 50 bacterial species and 200 human stool samples. Thus, this medium specifically selects for C. auris isolation from clinical samples, and allows studying its phenotypic profile.

It is a theoretical exportation for mass transpiration and thermal transpiration of Casson nanofluid over an extending cylindrical surface. The Stagnation point flow through porous matrix is influenced by magnetic field of form strength. Appropriate similarity functions are availed to yield the transmuted system of leading differential equations. Existence for the solution of momentum equation is proved for various values of Casson parameter β, magnetic parameter M, porosity parameter Kp and Raynolds number Re in two situations of mass transpiration (suction/injuction). Moreover, uniqueness results are discussed and for skin friction factor are established to attain accuracy for large injection values. Thermal and concentration profiles are delineated numerically by applying Runge-Kutta method and shooting technique.

Metal foams are widely studied as possible tools for the enhancement of heat transfer from hot bodies. The basic idea is that a metal foam tends to increase significantly the heat exchange area between the hot solid body and the external cooling fluid. For this reason, this class of porous materials are considered as good candidates for an alternative to finned surfaces, with different pros and cons. Among the pros, we mention the generally wider area of contact between solid and fluid. Among the cons is the difficulty of producing different specimens with the same inner structure, with the consequence that their performance may be significantly variable. This paper will offer a survey of the literature with a focus on the main heat transfer characteristics of the metal foams. Then, a numerical simulation of the heat transfer at the pore scale level for an artificial foam with a spatially periodic structure will be discussed. Finally, these numerical results will be employed to assess the macroscopic modelling of the flow and heat transfer in a metal foam.

In a globalised economy, metropolises seem to have an ‘extra gear’ compared to other urban centres: they attract the most skilled businesses, drive innovation in many fields and can count on material and immaterial assets that foster greater resilience to adverse events of various kinds. Against this backdrop, what lies ahead for medium-sized cities (MSCs)? This paper focuses on the case of Northern Italy and explores employment trends between 2012 and 2020 in 189 MSCs with a population of between 20,000 and 200,000 inhabitants. Using a descriptive approach, we investigate the evolutionary trajectories of these cities and their varying specialisations, over a period marked by a moderate recovery of the Italian economy following the Great Recession and by a further setback caused by the COVID-19 pandemic. In general, in terms of employment performance, the 189 cities in question were less dynamic than the metropolises, but it is nevertheless necessary to look at their individual circumstances in detail. Furthermore, the work shows significant differences between the MSCSs of the North-West and North-East in evolutionary trajectories and specialisation profiles. The most problematic situations also relate to cities with hub status in the wider context and are not focused only where there is a production structure linked to industry.

Medium-deep Borehole Heat exchanger (MBHE) has been widely paid attention for building heating. In order to avoid the thermal interference of adjacent MBHEs, temperature distribution characteristics of medium-deep rock-soil was investigated in this work. The evolution on maximum rock-soil thermal affected radius (MTAR) in full life cycle was further analyzed. The results showed that the rock-soil thermal affected area (RTAA) continuously expands in both radial and vertical directions during a heating season. Several factors of thermal extraction load, fluid velocity, geothermal gradient and pipe length have main impacts on the RTAA in vertical direction. Rock-soil thermal conductivity affects the RTAA in both radial and vertical directions. In non-heating season, temperature difference of rock-soil in radial direction dominates the temperature recovery in the first year while geothermal flow nearly dominates temperature recovery after 20 years. The thermal affected radius (TAR) in the 30 th year could be determined as an effective MTAR in full life cycle. In order to decrease installed distance of adjacent MBHEs, a new well layout form by deflecting borehole was proposed. The recommended deflection angle is equal to or larger than 4 times TAR angle. This work provides scientific reference for promoting application of multiple MBHE arrays.

: This work introduces the instrument design of the medium energy proton detector (MEPD, detection range: 30keV-5MeV) mounted on the Chinese Fengyun-4B (FY-4B) satellite. Compared with the similar detector on the Fengyun-3E (FY-3E) satellite, the instrument has undergone significant changes due to the different orbital radiation environment and solar lighting conditions. Based on the calculation of radiation model AP8, the geometry factor is reduced to 0.002 cm2sr, while the MEPD on FY-3E satellite is 0.005 cm2sr. Another difference is that sensors in some directions is exposed to direct sunlight for 80 minutes every day on this orbit, depending on the attitude angle of the satellite, which is much worse than that on FY-3E satellite. According to the calculation results of permeability of photons through different materials, a 100 nm thickness nickel film is added in front of sensors in order to eliminate light pollution completely. The experiment on the solar simulator shows that the measure is effective and the detector has no error counts when the solar irradiance coefficient is 1.0. In addition, Geant4 software is applied to simulate particle transportation process under complete machine condition so that to check the contamination of electrons on sensors among all directions after magnetic deflection. Data obtained in orbit shows that the instrument works properly, and the data is in good agreement with the AP8 model. The observations of the MEPD on board the FY-4B satellite can provide important support for the safety of the spacecraft and the theoretical research related to space weather.

This research focuses on exploring gravitational lensing of the wormhole in Einstein-bumblebee gravity with an antisymmetric tensor. The Gibbons and Werner technique based on the Gauss-Bonnet theorem is utilized to calculate the bending angle of light. The effects of non-plasma and plasma medium on the bending angles are investigated. Furthermore, we examine the deflection angle $\Tilde{\alpha}$ in relation to the impact parameter $\sigma$ and minimal radius $r_{0}$ in both non-plasma and plasma mediums. Our findings indicate that the deflection angle is positively correlated with $r_{0}$, meaning that larger values of $r_{0}$ result in larger deflection angles and smaller values of $r_{0}$ result in smaller deflection angles. On the other hand, the deflection angle $\Tilde{\alpha}$ is inversely related to the impact parameter $\sigma$.

The onset of the thermal instability is investigated in a porous channel with plane parallel boundaries saturated by a non–Newtonian shear–thinning fluid and subject to a horizontal throughflow. The Ellis model is adopted to describe the fluid rheology. Both horizontal boundaries are assumed to be impermeable. A uniform heat flux is supplied through the lower boundary, while the upper boundary is kept at a uniform temperature. Such an asymmetric setup of the thermal boundary conditions is analysed via a numerical solution of the linear stability eigenvalue problem. The linear stability analysis is developed for three–dimensional normal modes of perturbation showing that the transverse modes are the most unstable. The destabilising effect of the non-Newtonian shear–thinning character of the fluid is also demonstrated as compared to the behaviour displayed, for the same flow configuration, by a Newtonian fluid.

The article is devoted to issues related to the propagation and transformation of vortexes in the optical range of frequency. Within the framework of the traditional and modified model of slowly varying envelope approximation (SVEA), the process of converting vortex beams of the optical domain into vortex beams of the terahertz radio range based on nonlinear generation of a difference frequency in a medium with a second-order susceptibility is considered. The modified SVEA splits a slowly varying amplitude into two factors, which makes it possible to more accurately describe the three-wave mixing process. The theoretical substantiation of the rule of vortex beams topological charges conversion is given – the topological charge of the output radio-vortex beam is equal to the difference between the topological charges of the input optical vortex beams. A numerical simulation model of the processes under consideration has been implemented and analyzed.

This studies the plasmonic properties of the bimetallic quantum dot Ag@Au core-shell nanostructures embedded in the non-absorbent host medium. Local field enhancement factor and coefficient of absorption of Ag-core and Au-shell are primarily studied based on quasi-static approximation of classical electrodynamics for 6-10 nm composite radius. In this quantum dot geometry, two set of plasmonic resonances in visible spectral region are observed: the first resonance associated with inner interface of gold (Ag@Au) and the second resonance associated with outer interface of gold (Au@medium). The two plasmonic resonances are close each other and enhanced when the size of composite decreased for a fixed core size while shifted to in opposite direction and the amplitude of peak decreased when the core size is increased for a fixed composite size. For the optimized size of core/composite or shell thickness and other parameters to the desired values, such type of composites are recommended for various applications like; photocatalysis, biomedical, nano-optoelectronics.

The technique of superposition of motions in the space of Lagrange variables is described, which allows us to obtain the equations of combined motion by replacing the Lagrange variables of superimposed (external) motion with Euler variables of nested (internal) motion. The components of velocity and acceleration in the combined motion obtained as a result of differentiating the equations of motion in time coincide with the results of vector addition of the velocities and accelerations of the particles involved in the superimposed motions at each moment of time. Examples of motion and superposition descriptions for absolutely solid and deformable bodies with equations for the main kinematic characteristics of motion, including for robot manipulators with three independent drives, pressing with torsion, bending with tension, and cross– helical rolling, are given. For example, given the fragment of calculation of forces in the kinematic pairs shown the advantages of the description of motion in Lagrangian form for the dynamic analysis of lever mechanisms, allows to determine the required external exposure when performing the energy conservation law at any time in any part of the mechanism.

Teaching through English Medium Instruction (EMI) has been a strategic move in some European and Asian countries as part of their educational internationalisation. A large number of studies on EMI teaching have appeared in the last decade. The majority of these report on issues and concerns at macro-level including: the lack of structured policy guidance, EMI lecturers and students’ low level of English proficiency, and a shortfall of research informed training programs for EMI lecturers. Up to date, there is little research into EMI in-class teaching and learning. Lived experience in EMI in-class practice has been largely ignored. To fill this gap, this research explored a group of academics’ in-class EMI practice in a Chinese university. Their teaching process through EMI was observed and recorded, with data analysed through a multiple theoretical lens. Data reveal that EMI teaching is a complicated issue and can be neither standardised nor prescribed. It needs to be addressed as a pedagogy responding to and influenced by local context, driven by language, culture and education systems. This research is expected to provide insight for the development of localised institutional guidelines for EMI teaching and lecturers’ professional development in EMI teaching.

In this paper, the methods and their analysis for estimating the location of three dimension (3-D) single source buried in lossy medium are presented with uniform circular array (UCA). The mathematical model of the signal in the lossy medium is proposed. Using location information in the covariance matrix obtained by sensors’ output, the equations of the source location (azimuth angle, elevation angle and range) are obtained. The phase and amplitude of the covariance matrix function are used to process these equations respectively. Then, the phase and amplitude of the covariance matrix function are used to process the source localization in the conductive medium together. By analyzing the characteristics of the proposed methods and MUSIC method, the computational complexity and the valid range of these methods are given. From the results, whether the loss is known, we can choose the appropriate method to process the issues (localization in lossless medium or lossy medium).

In order to improve the yield of the therapeutic agent N-methylsansalvamide (SA), optimization of stationary liquid fermentation conditions was carried out on an endophytic strain, Fusarium sp. R1, at flask level. Using a One-Factor-At-a-Time approach, the fermentation conditions for SA production were determined as follows: fermentation time of 13 d, 24 oC, initial pH of 6.5, seed age of 24 h, inoculum size of 5.0% (v/v), loading volume of 50% (v/v), 20.0 g/L salinity, and sucrose, tryptone, and yeast extract were found to be the best sources of carbon and nitrogen. Using response surface methodology, the optimal medium compositions consist of 22.5 g/L sucrose, 16.5 g/L tryptone, and 0.024 g/L yeast extract. Verification tests suggested that the SA yield under these optimal conditions reached up to 536.77 ± 2.67 mg/L, which was increased by almost ten times the initial yield (54.05 ± 3.45 mg/L). The findings indicate that a high SA production yield can be achieved by static culture of strain R1 under the proper fermentation conditions using a low-cost medium. This study paves the way towards industrial-scale SA production by strain R1 for new drug development.

Renewable Energy Communities (RECs), strongly sustained by the European Community as a viable way to fasten low carbon transition, slowly develop in Italy for regulatory . This study delves into the framework of RECs and explores the perspective of the specifically small and medium industries in the Lombardy region of Italy through a survey. Our findings reveal that while SMEs exhibit interest in RECs, there is a notable gap in knowledge and engagement. We argue that the active involvement of Public Administration Bodies (PABs) is crucial in disseminating information about RECs and highlighting their benefits. The survey results, elaborated through a non-parametric test (Mann-Whitney U test) indicate that PABs play a pivotal role in influencing SMEs' perceptions and willingness to participate in RECs. The data suggest that more direct and effective communication strategies by PABs could significantly enhance SMEs' understanding and involvement in RECs. This research underscores the need for targeted and strategic efforts by PABs to foster a more informed and proactive approach among SMEs towards renewable energy initiatives. Such endeavors could be instrumental in accelerating the adoption of RECs, contributing to a more sustainable and resilient energy future.

The study focuses on the impact of new methods for inhibiting malolactic fermentation in white wines on their analytical and sensory properties. Enological preparations with different mecha-nisms of effect were tested: fumaric acid, chitosan, Estaan (a preparation based on tannin inhibi-tion), medium-chain fatty acids (MCFA), sulphur dioxide and a control variant where malolactic fermentation (MLF) was performed. The samples underwent analysis through HPLC (high-performance liquid chromatography) to determine concentrations of malic and lactic acid, as well as biogenic amines. GC (gas chromatography) analysis was used to monitor volatile sub-stances, alongside sensory evaluation. The study demonstrated a significant influence of indi-vidual enological preparations on the aromatic profile of the examined wines. The SO2 and MCFA variants exhibited the highest concentrations of volatile substances within the esters group, spe-cifically isoamyl acetate, 1-hexyl acetate and phenylethyl acetate. Conversely, the fumaric acid and Estaan variants displayed the lowest concentrations of these esters. The most notable disparities were observed in acetoin concentration, with the MCFA variant exhibiting the lowest values. Additionally, the chitosan variant showed higher concentrations of putrescine and spermidine compared to the MCFA and fumaric acid variants, which presented the lowest levels.

Castanea sativa Mill., an indigenous species of the mountainous Gabala region of Azerbaijan, where its local variety is now facing the danger of extinction. The preservation of this variety of European chestnut requires the development of effective strategies for reliable in vitro regeneration systems as an alternative to traditional methods, which has become the main objective of this study. In solving this problem, the generally accepted technique of micro-multiplication of axillary shoots was mainly used. First, a phased sterilization of was carried out using liquid soap, Previkur fungicide and mercury (II) chloride. DKW (Driver and Kuniyuki Walnut) nutrient medium was used for germination of explants, into which growth stimulants BAP (Benzilamunapurine), IBA (Indole - 3 butyric acid), IAA (Indole Acetic acid), NAA (Naphthalene Acetic Acid) and GA3 (Gibberelic acid) were introduced in various combinations and quantities. The test of the above-mentioned sterilization model revealed significant shortcomings in terms of the acceptability of the results obtained (16-77%). It was also found that the germination of explants takes 14 days and it is better to conduct it in a DKW environment containing hormones BAP (0.6 mg), IBA (0.1 mg) and GA3 (0.1 mg) / 1 L DKW. A mixture of BAP (0.1mg) + IBA (0.35 mg) is more suitable for the reproduction of grown explants + GA3 (0.2 mg) / 1 l DKW (the result is 3 new micro-plants for each explant), and for good root formation (it takes 30 days) – a mixture of IBA 1.0 mg + NAA 0.5 mg + IAA 0.5 mg / l L DKW. After the shoots have acquired a certain length (at least 1.5 cm), it is required to transfer them for 22 days to a DKW medium containing IBA (1 mg), IAA (0.5 mg) and NAA(0.5 mg) / l L DKW so that the root splitting process begins and ends.

The possibility of increasing the resource of steel fingers working in tandem with bronze bushings by plasma-electrolytic nitrocarburizing of the surface of medium carbon steel is shown. The phase composition, microhardness, morphology and surface roughness were studied. Tribological tests were carried out under dry friction conditions according to the shaft-pad scheme. It has been established that plasma-electrolytic nitrocarburizing of the surface of medium carbon steel at a temperature of 700 °C for 5 minutes leads to a decrease in a friction coefficient by 2.3 times, weight wear of steel by 24.9 times, and bronze counterbody by 5.9 times. At the same time, the contact stiffness increases 2.6 times. The type of wear is fatigue with dry friction and plastic contact. Changes in tribological characteristics are associated with the high hardness of the hardened steel surface together with the influence of dispersed nitrides and iron carbonitrides distributed in it.

Einstein’s theory of general relativity describes the gravitational field around massive objects ( like Earth) as a curvature in the spacetime. But it leaves the following question unanswered; why is the spacetime curved by a mass? Through a theory that has been introduced recently, regarding a medium for a light propagation, a simple answer is introduced. It depends on redefining the rest energy for a massive object ( like a planet) as new form of kinetic energy. For a static and spherically symmetric object, with a specific radius(

The narrow process window during intercritical annealing and discontinuous yielding have limited the commercialisation of medium Mn steels. In this study, a double annealing process based on the commercial continuous annealing line is proposed. The cold-rolled medium Mn steels were first fully austenitized and quenched during the first annealing, followed by the intercritical annealing for reverted austenite transformation. The microstructure of duplex lath-shaped austenite and ferrite is produced and the steel exhibit a desirable continuous yielding during tensile deformation. Al is added into the medium Mn steel to enlarge the process window and to improve partitioning efficiency of Mn. The produced steel is more robust with temperature fluctuation during the industrial process due to the enlarged intercritical region. Mn partitioning is more efficient owing to elevated annealing temperature, which results in the improvement of ductility in the Al-added steel with increased austenite stability.

This study investigated the roles of transactions cost in MSMEs access to finance. This was done by investigating the impact of transactions cost on access to credit from both MSMEs and financial institutions (commercial banks and microfinance banks). From the MSMEs’ side, borrowing experience, decision lag, firm size and borrowers’ distance to the loan office were investigated. On the financial institution’s side, the costs of information gathering, loan administration, monitoring and loan enforcement were investigated. We used the questionnaire survey method, in-depth interviews and case studies, as well as the annual financial statements of the banks. We identified interest rate and collateral value as constraints to access to finance for MSMEs. We also found financial institutions’ attitude to MSMEs access to credit was not friendly. Financial institutions need to do more to bring down transaction cost of lending. This hopefully can be achieved by investing more in agent banking which would lower operating costs, as well as spreading risk, and ultimately increase credit intermediation to small businesses.

To establish simulated micro-gravity conditions, biological organisms are placed on a simulated microgravity system, which primarily rotate in two or three dimensions and rely on slow sedimentation with latency to detect gravity. Fluid dynamics arise as a consequence of rotation of the chambers with in which the cells are filled. To minimize the effects of centrifugal forces, it is necessary to position the samples as close to the center of rotation as possible. Strong shear forces and velocities within the vessel can have an adverse impact on cells, making this a critical topic in cell biology. During experimental investigation, this specific phenomenon is not apparent, but numerical modelling readily illustrates and is not widely analyzed in literature's. Furthermore, bulk flask are frequently employed on random positioning machines (RPM), not merely because they demand a substantial quantity of reagents. The flask presented in the study can be easily developed and fitted in conventional cell culture plates containing medium and reagents similar to those used in ground experiments, thus allowing it to remain close to the center of rotation. In the present study, a series of fluid dynamics simulations are performed to examine the impact of shear forces within the microvessel presented under varying conditions using a foreign medium condition, and these results are compared with existing vessels by observing the effects of shear forces and maximum velocity zones.

Proposed study aims to investigate the digital transformation of Greek small and medium enterprises (SMEs), with a particular focus on their digital maturity and the strategic and organizational factors contributing to digital transformation. The research issue of digital transformation is attracting considerable interest among academics and business practicians since COVID-19 accelerated the procedure of implementing Industry’s 4.0 principles all over global economies. Quantitative research on 147 Greek SMEs revealed most important issues on how these businesses implement digital transformation, factors accelerating or decelerating the process, barriers and expected outcomes. Research enlights how SMEs face the transition to digital business and reveals the factors that can facilitate the whole process. Results can be valuable for stakeholders enabled to digital transformation process from both business and academic point of view, while there exist aspects that can contribute to policy makers / motivation developers in state’s level as well.

The study of fractures in the subsurface is very important in unconventional reservoirs since they are the main conduits for hydrocarbon flow. For this reason, a variety of equivalent medium theories have been proposed for the estimation of fracture and fluid properties within reservoir rocks. We experimentally investigated the feasibility of applying the Galvin model in fractured tight stones. For this proposal, three artificial fractured tight sandstone samples with the same background porosity (11.7% ± 1.2%) but different fracture densities of 0.00, 0.0312, and 0.0624 were manufactured. The fracture thickness was 0.06 mm and the fracture diameter was 3 mm in all the fractured samples. Ultrasonic P- and S-wave velocities were measured at 0.5 MHz in a laboratory setting in dry and water-saturated conditions in directions at 0°, 45°, and 90° to the fracture normal. The results were compared with theoretical predictions of the Galvin model. The comparison showed that model predictions significantly underestimated P- and S- wave velocities as well as P-wave anisotropy in water-saturated conditions, but overestimated P-wave anisotropy in dry conditions. By analyzing the differences between the measured results and theoretical predictions, we modified the Galvin model by adding the squirt flow mechanism to it and used the Thomsen model to obtain the elastic moduli in high- and low-frequency limits. The modified model predictions showed good fits with the measured results.

Light travels in a moving medium through densities that differ from the density of that medium at rest. This study derives a formula for light velocity through a moving medium for any direction of light propagation in that medium that, applied to the Fizeau experiment, gives a fringe shift of 0.23541. The Fresnel drag coefficient applied to the Fizeau experiment offers a fringe shift of 0.20466. The mean of the fringe shift observations in the Fizeau experiment of 0.23016 confirms both expectations.

In this article, we calculate the deflection angle of tidal charged black hole (TCBH) in weak field limits. First we obtain the Gaussian optical curvature and then apply the Gauss-Bonnet theorem on it. With the help of Gibbons-Werner method, we are able to calculate the light's deflection angle by TCBH in weak field limits. After calculating the deflection angle of light, we check the graphical behavior of TCBH. Moreover, we further find the light's deflection angle in the presence of plasma medium and also check the graphical behavior in the presence of plasma medium. Moreover, we investigate the shadow of TCBH.For calculating the shadow, we first find the null geodesics around the TCBH and then find its shadow radius. We also obtain TCBH's shadow in the plasma medium. Hence, we discuss the shadow of the TCBH using the $M87^{*}$ parameters announced by the Event Horizon Telescope.

Komagataeibacter spp. have been used for the bioconversion of industrial wastes and lignocellulosic hydrolysates to bacterial cellulose (BC). Recently studies have demonstrated the capacity of Komagataeibacter spp. in the biotransformation of inhibitors found in lignocellulosic hydrolysates, aromatic lignin-derived monomers (LDMs) and acetate. In general, detoxification and BC synthesis from lignocellulosic inhibitors requires a carbon flow from acetyl-coA towards tricarboxylic acid and gluconeogenesis, respectively. However, the related molecular aspects have not yet been identified in Komagataeibacter spp. In this study, we isolated a cellulose producing bacteria capable of synthesizing BC in a minimal medium containing crude glycerol, a by-product from biodiesel production process. The isolate, affiliated to Komagataeibacter genus, synthesized cellulose in minimal medium containing glucose (3.3±0.3 g/L), pure glycerol (2.2±0.1 g/L) and crude glycerol (2.1±0.1 g/L). Genome assembly and annotation identified four copies of bacterial cellulose synthase operon and genes for redirecting the carbon from central metabolic pathway to gluconeogenesis. According to the genome annotations, a BC production route from acetyl-CoA, a central metabolic intermediate, was hypothesized and was validated using acetate. We identified that when K. rhaeticus ENS9b was grown in minimal medium supplemented with acetate, BC production was not observed. However, in presence of readily utilizable substrate, such as spent yeast hydrolysate, acetate supplementation improved BC synthesis.

The recent pandemic has greatly stressed supply chains, treatment modalities, and medical resources. Cold atmospheric plasma (CAP) has been used for a wide range of applications in biomedical engineering due to its many components including electrons, charged particles, reactive oxygen species (ROS), reactive nitrogen species (RNS), free radicals, ultraviolet (UV) photons, molecules, electromagnetic fields, physical forces, and electric fields. In this manuscript, we develop CAP devices for COVID-19. Our manuscript indicates the advantages of highlydeployable CAP devices for both sanitation and treatment, without the need for supply chains of special consumables such as hand sanitizers and the like. We hope that this timely research will help engage the broader community of engineers that wish to help the medical community with this pandemic and to prevent and treat future outbreaks.

Purpose. This article examines the use of English medium instruction (EMI) for teaching Japanese as a foreign language (JFL) by non-native speakers with a focus on multilingual classrooms. The study also explores teachers’ positive and negative beliefs about using EMI in classroom settings for JFL instruction.Methods and procedure. Two hundred sixty-one non-native Japanese language teachers worldwide voluntarily participated in the survey, answering the questionnaire (Google Forms and Jotforms) used to gather data. Both qualitative and quantitative methods were employed. The research instrument was piloted before the main study and was found to be effective and adequate to elicit the desired data. The research questions aimed to identify whether there were any relationships between the use of EMI and the multilingual classroom. Findings. The results showed a clear correlation between the extensive use of EMI and the multilingual character of JFL multilingual classrooms. Translanguaging turned out to be a common practice adopted by non-native Japanese teachers regardless of the primary language of instruction. The article concludes that EMI can be a valuable tool for JFL instruction in multilingual classrooms. Based on the investigation of the teachers’ beliefs, the study results showed a changing positive attitude towards English employed in JFL classrooms. Implications for research and practice. The findings can be used further to investigate EMI in JFL instructional practices in multilingual classrooms, to improve the quality of JFL instruction, and to facilitate the integration of multilingual education into foreign language teaching. Future research can explore the effectiveness of EMI in different JFL contexts and investigate the impact of EMI on students’ language learning outcomes.

A medium-Mn steel was processed by a route involving twin-roll strip casting, hot-rolling and quenching and partitioning with different quenching temperatures. The effects of quenching temperature on the microstructure and mechanical properties were studied. It was found primary martensite and retained austenite (RA) were obtained at the quenching temperature of 140–180 °C, while primary martensite, RA and secondary martensite were obtained when the quenching temperature was 220–300 °C. With increase in quenching temperature from 140 to 260 and to 300 °C, RA fraction first increased from 15.4% to 31.8% and then decreased to 16.6%. The sample at quenching temperature of 220 °C yielded the mechanical properties with yield strength of 992 MPa, tensile strength of 1159 MPa and total elongation of 20.4%. The superior mechanical properties were achieved by an optimum combination of high RA fraction (26.5 vol%), appropriate mechanical stability of RA and a small amount of secondary martensite.

This study presents a comprehensive investigation of entropy generation during natural convection in a porous medium with Casson fluid. The governing equations, including the momentum, energy, and entropy balance equations, are solved numerically using finite element method. Through the analysis, various parameters affecting entropy generation are investigated, such as the Casson fluid parameter, Radiation, Prandtl number, and Rayleigh number. The results indicate that the Casson fluid parameter significantly influences the flow and heat transfer characteristics, while the Darcy number and Rayleigh number control the intensity of natural convection. Moreover, the Prandtl number determines the relative significance of heat transfer compared to viscous effects.

The nature of the fracture and fragmentation process of concrete medium under blast loading is the transformation process of the medium from continuum to discontinuity, coupled with the significant rate correlation of concrete medium, its mechanical behavior presents a high degree of complexity. Problems such as grid distortion and even negative volume are often encountered in the finite element method and others when solving this problem, while the material point method can effectively avoid these problems. In addition, the widely used HJC concrete constitutive model does not take into account the segmented characteristics of the calculation function for dynamic increasing factor. Therefore, in this paper, firstly, the calculation function for dynamic increasing factor in the HJC concrete model is modified by SHPB experiment, and the improved HJC concrete model is proposed; secondly, the material point method simulation program is developed, and the improved HJC concrete model is embedded into the simulation program; finally, the simulation program is verified by numerical examples, and the results show that the developed simulation program can better simulate the fracture and fragmentation process of concrete medium under blast loading, especially the pulverization characteristics of the medium in the near zone of the load.

In this paper, we study the weak deflection angle using Gauss-Bonnet theorem and bounding greybody factor for electric and magnetic black holes in the background of nonlinear electrodynamics. Using Gibbons and Werner's approach, first we acquire the Gaussian optical curvature to use in Gauss-Bonnet theorem and calculate the bending angle for spherically symmetric electric and magnetic black holes in both non-plasma and plasma mediums in the weak field limits. Later, we calculate the rigorous bounds of the greybody factor for the given black holes. Furthermore, we look into the graphical behaviour of bending angles and greybody bounds at some specific values of multiple parameters as well as black holes charges. It is to be mention here that all the results for the electric and magnetic charged black holes solutions reduce into the Schwarzschild black hole solution in the absence of the black holes charges.

The objective of this paper is to analyze the weak deflection angle of Einstein-Gauss-Bonnet gravity in the presence of plasma medium. To attain our results, we implement the Gibbons and Werner approach and use the Gauss-Bonnet theorem to Einstein gravity to acquire the resulting deflection angle of photon's ray in the weak field limit. Moreover, we illustrate the behavior of plasma medium and non-plasma mediums on the deflection of photon's ray in the framework of Einstein-Gauss-Bonnet gravity. Similarly, we observe the graphical influences of deflection angle on Einstein-Gauss-Bonnet gravity with the consideration of both plasma and non-plasma mediums. Later, we observe the rigorous bounds phenomenon of the greybody factor in contact with Einstein-Gauss-Bonnet gravity and calculate the outcomes, analyze graphically for specific values of parameters.

The Oldroyd–B model for a linear viscoelastic fluid is employed to investigate the buoyant flow in a vertical porous layer with permeable boundaries kept at different uniform temperatures. Seepage flow in the viscoelastic fluid saturated porous layer is modelled through an extended version of Darcy’s law taking into account the Oldroyd–B rheology. The basic stationary flow is parallel to the vertical axis and describes a single–cell vertical pattern where the cell has an infinite vertical height. A linear stability analysis of such a basic flow is carried out to determine the onset conditions for a multicellular pattern. The neutral stability curves and the values of the critical Rayleigh number are evaluated numerically for different retardation time and relaxation time characteristics of the fluid.

Real-time evolution of the electron densities under excitations in La₂CuO₄ was calculated by the time-dependent density functional theory (TDDFT). The author found, for the first time, under excitations, the electron cloud of Cu²⁺ changes obviously and the characteristic frequencies are 83 meV and 36 meV, respectively, for two different modes. The results are unexpected and close to that of lattice vibrations. The results show that the electron cloud of Cu²⁺ (just like the lattice) can be the electron-pairing medium in high temperature copper oxide superconductors.

This paper reveals the physical properties of Jeffery nanofluid flow past a moving plate embedded in porous medium under the existence of radiation and thermal diffusion. The analysis is carried out in three cases of moving plate, namely stationary plate λ = 0, forth-moving plate λ = 1, back-moving plate λ = −1. Finite difference method is applied to solve the governing equations of the flow and pointed out the variations in velocity, temperature and concentration with the use of graphical presentations. The impact of several parameters on local skin friction, Nusselt number and Sherwood number is also noticed and discussed. Enhancement of velocity is observed under the impact of Jeffery parameter for the cases of stationary plate and back-moving plate, whereas reverse nature is found in the case of forth-moving plate. The velocity enhances as the values of porosity parameter increases for the case of stationary plate and forth-moving plate but a reverse nature is noticed in the case of back-moving plate.

In this paper, I present a comprehensive theoretical framework for understanding surface-enhanced Raman scattering (SERS) measurements in both solution and thin film setups, focusing on electromagnetic enhancement principles. Two prevalent types of SERS substrates found in the literature are investigated: plasmonic colloidal particles, including spherical and spheroid nanoparticles, nanoparticle diameters, and thin-film-based SERS substrates like ultra-thin substrates, bundled nanorods, plasmonic, and porous thin films. The investigation explores the impact of analyte adsorption, orientation, and the polarization of the excitation laser on effective SERS enhancement factors. Notably, it considers the impact of analyte size on the SERS spectrum, by examining scenarios where the analyte is significantly smaller or larger than the hot-spot dimensions. The analysis also incorporates optical attenuations arising from the optical properties of the analyte and the SERS substrates. The findings provide possible explanations for many observations made in SERS measurements, such as variations in relative peak intensities during SERS assessments, reductions in SERS intensity at high analyte concentrations, and the occurrence of significant baseline fluctuations. The study offers valuable guidance for optimizing SERS substrate design, enhancing SERS measurements, and improving the quantification of SERS detection.

The authors present a novel sensing platform for a disposable electrochemical, non-enzymatic glucose sensor strip at physiological pH. The sensing material is based on dendritic gold nanostructures (AuNs) resembling feather branches, which are electrodeposited onto a Laser-scribed 3D-Graphene electrode (LSGE). The LSGEs were fabricated via a one-step laser scribing process on a commercially available polyimide sheet. This study investigates several parameters that influence the morphology of the deposited Au nanostructures and the catalytic activity towards glucose electro-oxidation. The electrocatalytic activity of AuNs-LSGE was evaluated using Cyclic Voltammetry (CV), Linear Sweep Voltammetry (LSV), and Amperometry, and was compared to commercially available carbon electrodes prepared under the same electrodeposition conditions. The sensor demonstrated good stability and high selectivity of the amperometric response in the presence of interfering agents, such as ascorbic acid, when a Nafion membrane was applied over the electrode surface. The proposed sensing strategy offers a wide linear detection range, from 0.5 to 20 mM, which covers normal and elevated levels of glucose in the blood, with a detection limit of 0.21 mM. The AuNs-LSGE platform exhibits great potential for use as a disposable glucose sensor strip for point-of-care applications, including self-monitoring and food management. Its non-enzymatic features reduce dependence on enzymes, making it suitable for practical and cost-effective biosensing solutions.

In this work, we study gravitational lensing in the weak field limits and the shadow by charged black holes in non-linear electrodynamics corrections. To find the deflection angle in vacuum (non-plasma) up to the leading order terms, we compute the optical Gaussian curvature from optical metric and utilize the Gauss-Bonnet theorem by applying Gibbons and Werner’s technique. Also, we derive the bending angle in plasma and dark matter mediums and observe that the bending angle increases by increasing the effects of these mediums. Further, in vacuum and plasma mediums, we investigate the graphical behavior of the bending angle with respect to the impact parameter u and notice that the bending angle exponentially decreases. Moreover, we calculate the Hawking temperature using the Gauss-Bonnet theorem and compare it with a standard method of computing the Hawking temperature. Furthermore, we investigate the bound of the greybody factor and graphically examine that bound converges to the 1. We relate our obtained results with the results of black holes given in the literature. Finally, we have considered exploring the effect of NLED, plasma, and dark matter on the black hole’s shadow radius to broaden the study’s scope. Results for the shadow indicate that the three parameters give different deviations to the shadow radius. Interestingly, while plasma affects both the photonsphere and shadow, dark matter only influences the shadow.

In this paper, we examine the weak deflection angle and greybody factor of magnetized regular black hole. We implement the Gauss-Bonnet theorem on magnetized regular black hole to get the deflection angle. Moreover, we analyze the influence of plasma and non-plasma mediums on deflection angle of magnetized regular black hole. We observe the graphical behaviour of plasma and non-plasma mediums on deflection angle of magnetized regular black hole. Lastly, we study the rigorous bound phenomenon of the greybody factor of magnetized regular black hole. For this purpose we calculate greybody factor results and analyze the graphical behaviour of greybody bound for the different values of the parameters.

The Atlantic cod (Gadus morhua) and red king crab (Paralithodes camtschaticus) processing wastes are massive and unutilized in the Murmansk region of Russia. The samples of skin-containing waste of Atlantic cod fillets production were hydrolyzed using enzyme preparations derived from red king crab hepatopancreases, porcine pancreases and Bacillus subtilis bacteria. The activity of enzymes from crab hepatopancreases was significantly higher than the activity of enzymes derived from other sources. The optimal conditions of the hydrolysis process have been figured out. The samples of cod processing waste hydrolysate were analyzed for amino acid composition and molecular weight distribution. The samples of hydrolysate were used as core components for bacterial culture medium samples. The efficiency of the medium samples was tested for Escherichia coli growth rate; the most efficient sample had efficiency 95.3% of that of a commercially available medium based on fish meal. Substitution of medium components with those derived from industrial by-products is one of the ways to decrease a cost of a culture medium in biopharmaceutical drug production.

In this paper, we study light rays in a Kazakov-Solodukhin black hole. To this end, we use the optical geometry of the Kazakov-Solodukhin black hole within the Gauss-bonnet theorem. We first show the effect of the deformation parameter $a$ on the Gaussian optical curvature, and then we use the modern method popularized by Gibbons and Werner to calculate the weak deflection angle of light. Our calculations of deflection angle show how gravitational lensing is affected by the deformation parameter $a$. Moreover, we demonstrate the effect of a plasma medium on weak gravitational lensing by the Kazakov-Solodukhin black hole. We discuss that the increasing the deformation parameter $a$, will increase the weak deflection angle of the black hole. Our analysis also uncloak how one may find a observational evidence for a deformation parameter on the deflection angle.

The paper presents a new vision on the energy consumption management in the case of the Small and Medium Enterprises (SMEs), integrated into an advanced decision support platform, with technical and economic benefits on increasing the energy efficiency, which contains modules for database management, profiling, forecasting, and production scheduling. Inside each module, Artificial Intelligence and Data Mining techniques were proposed to remove the uncertainties regarding the dynamic of technological flows. Thus, the data management module includes the Data Mining techniques, that extract the technical details on the energy consumption needed in the development of production scheduling strategies, the profiling module uses an original approach based on clustering techniques to determine the typical energy consumption profiles required in the optimal planning of the activities, the forecasting module contains a new approach based on an expert system to forecast the total energy consumption of the SMEs, and production scheduling module integrates a heuristic optimization method to obtain the optimal solutions in flattening the energy consumption profile. The testing was done for a small enterprise from Romania, belonging to the domain of trade and repair of vehicles. The obtained results highlighted the advantages of the proposed decision support platform on the decrease in the intensity of energy consumption per unit of product, reduction of the purchase costs, and modification of the impact whom the energy bills have on the operational costs.

The effect of filling velocity on positive macrosegregations in large size steel ingots was studied. Macrosegregation and macro-/micro-structure were characterized on the hot-tops and a portion of the upper section of two ingots. The measurements revealed that segregation features in the two ingots varied as a function of the alloying elements, and that the severity of positive macrosegregation in the casting body was reduced when the filling rate was increased. It was also found that at the higher filling rate, grain morphologies in the first solidified zones of the ingot changed from columnar to equiaxe, and secondary dendrite arm spacing (SDAS) became slightly smaller in the intermediate and final solidified zones. The experimental findings were analyzed in the framework of diffusion and convection controlled solidification, as well as liquid metal flow theories. The solute dependence of segregation features was related to the difference in solid-liquid partition coefficient and diffusion capability of each element in the liquid iron. Calculation of Reynolds numbers (Re) during the filling process, for both ingots, showed that higher filling velocity caused more instable movement of the liquid metal in the initial solidification stage, resulting in the modification of grain morphology, as well as accelerated solidification rate.

Nonlinear electrodynamics is known as the generalizations of Maxwell electrodynamics at strong fields and presents interesting features such as curing the classical divergences present in the linear theory when coupled to general relativity. In this paper, we consider the asymptotically flat Reissner-Nordstr\"om black hole solution with higher-order magnetic correction in Einstein-nonlinear-Maxwell fields. We study the effect of the magnetic charge parameters on the black hole, viz. weak deflection angle of photons and massive particles using Gauss-bonnet theorem. Moreover, we apply the Keeton-Petters formalism to confirm our results of the weak deflection angle. Apart from vacuum, their influence in the presence of different media such as plasma and dark matter are probed as well. Finally, We examine the black hole shadow cast using the null-geodesics method and investigate its spherically in-falling thin accretion disk. Our inferences show how the magnetic charge parameter $p$ affects the other physical quantities; so, we impose some constraints on this parameter using the observations from the Event Horizon Telescope.

In this project, our foremost intention is to analyze the angle of deflection of photon by NED black holes with many horizons in the context of non-linear electrodynamics. For the accomplishment of our intention at first we manipulated the optical metric of the desired black holes for the calculation of Gaussian curvature. After that, the angle of deflection in leading orders is attained from the desired black holes in weak field limit by using the famous Gauss-Bonnet theorem. Moreover, we evince the effect of plasma medium on the angle of deflection. At last, the graphical impact of the angle of deflection for NED black holes with many horizons is examined with respect to black hole charge and impact parameter in both the plasma and non plasma medium. In addition, we discuss the rigorous bound for grey body factor of the desired black hole and also observer its graphical behavior.

In this paper, we calculate the deflection angle of photon by Casimir wormhole in the weak field limit approximation. First we calculate Gaussian optical curvature with the help of optical spacetime geometry and so we use the Gauss-Bonnet theorem on the Gaussian optical metric. Then we find the deflection angle of photon by Casimir wormhole. Moreover, we calculate the photon's deflection angle in the presence of plasma medium and we also see the graphical nature of deflection angle in both cases. Second, we move towards the shadow of Casimir wormhole. After the observations of Event Horizon Telescope, the study of shadow become very important so that we plot the shapes of shadow of Casimir wormhole, and we calculate the photon geodesic around the Casimir wormhole.

Over the last three decades, special economic zones (SEZs) have given new impetus to the ever-growing export-oriented industrialization in developing countries. Where various economies have benefited from SEZs, many zones have ended up becoming enclaves with trifling advantage. The SEZs in Pakistan have experienced the same fate and failed to contribute to exports, employment and creating linkages with the domestic economy. Recently under China Pakistan Economic Corridor (CPEC), SEZs are proposed to be set up in Pakistan; with a hope to fuel the stuttering economy. However, it is pertinent to first understand the local context and device policies considering stakeholders' perspectives. This study aims to identify the factors for the successful implementation of SEZs derived from the regional context of Pakistan. In-depth interviews are conducted from most relevant stakeholders, who have been involved in the development of SEZs. The results pointed towards the removal of political influence over zones and government taking the lead role in deciding the types of industry to be invited in these zones. Each zone should have a clear vision of development based on its regional advantage. The zone promotions should be based on competitiveness rather than fiscal incentives. Joint ventures and PPP to be encouraged inside the zones for sustainable operations.

Social customer relationship management (SCRM) is a new philosophy influencing the relationship between customer and organization, where the customer gets opportunity to control relationship through social media. The paper aims on (a) identification of current level of SCRM and also on (b) influence of basic organizational characteristics on SCRM level. The data were gathered through the questionnaire distributed in 362 organization headquartered in the Czech Republic. The questionnaire comprised 54 questions focusing on the significance of marketing and CRM practices, establishing a relationship with the customer, online communities, the use of social media in marketing, and acquiring and managing information. The majority of questions were scalable and used typical five-level Likert scale. Results showed that larger firms more often set up their own online communities and manage them strategically, moreover they are able to manage information better. Contrariwise, small sized organizations use social networks as a way to establish communication with the customer more than large sized entities. Use of social media for marketing purposes is significantly higher in organizations oriented on consumer markets than on business markets.

Huntington's disease (HD) is an inherited neurodegenerative disorder that usually starts during midlife with progressive alterations of motor and cognitive functions. The disease is caused by a CAG repeat expansion within the huntingtin gene leading to severe striatal neurodegeneration. Recent studies conducted on pre-HD children highlight early striatal developmental alterations starting as soon as 6 years old, the earliest age assessed. These findings, in line with data from mouse models of HD, raise the question of when during development do the first disease-related striatal alterations emerge or whether they contribute to the later appearance of the neurodegenerative features of the disease. In this review we will describe the different stages of striatal network development and then discuss recent evidence for its alterations in rodent models of the disease. We argue that a better understanding of the striatum’s development should help in assessing aberrant neurodevelopmental processes linked to the HD mutation.

Currently, companies and SMEs (small and medium enterprises) are looking to be more competitive. In order to achieve this, they are adopting new business models and strategies that allow them to move towards sustainability. Strategies such as CSR (Corporate social responsibility) and supply chain management have become essential for ensuring a company’s permanence and financial consolidation. The literature has stated that the theories of Stakeholders and Sustainability are fundamental pillars for the development and sustained growth of business. The purpose of this article is to examine the effects of CSR and the SC (supply chain) on innovation, image and reputation, and in turn, their influences on profitability in SMEs. This research is based on a sample of 143 companies in the city of Guaymas Sonora, in Mexico. For the analysis and validation of the results, we used the SEM (Structural Equation Modeling) statistical technique based on the variance, through PLS (Partial Least Squares) (using SmartPLS version 3.2.6 Professional). The findings show that SMEs that develop social and sustainable practices increase their level of innovation, and improve their image, their reputation, and their financial profitability. This work contributes mainly to the development of Stakeholders and Sustainability.

Background: Globally, hot cooked refined rice is consumed in large quantities and is a major contributor to dietary glycaemic load. This study aimed to compare the glycaemic potency of hot and cold stored parboiled rice to widely available medium grain white rice. Method: Twenty-eight healthy volunteers participated in a three treatment experiment where postprandial blood glucose was measured over 120 minutes after consumption of 140g of rice. Three rice samples were freshly cooked medium-grain white rice, freshly cooked parboiled rice, and parboiled rice stored overnight at 4 ºC. All rice was served warm at 65 ºC. Chewing time was recorded. Results: The 24-hours cold-stored and reheated parboiled rice resulted in a 42% and 12% lower blood glucose concentration trajectory than freshly cooked medium-grain white rice and freshly cooked parboiled rice. Chewing time for 10g cold stored parboiled rice was 6 seconds (25%) longer and was considered more palatable, visually appealing and better tasting than freshly cooked medium grain (all P<0.05). Conclusions:. For regular consumers of rice reheating cooked rice after cold storage would lower the dietary glycaemic load and long term may reduce risk for type 2 and gestational diabetes. More trials are needed to identify the significance.

In order to obtain the good match between yield strength and low-temperature toughness, the short-time partial austenitization (SPA) process was employed for V-microalloying 0.22C-5.24Mn steel. The initial microstructure after intercritical tempering was dual-phase ferrite and reversed austenite (RA), while the final microstructure was consisted of ferrite, RA and secondary martensite (SM) after subjected to SPA process. (V, Mo)C with disc-like morphology mainly precipitated during intercritial tempering, and the aspect ratio of particle decreased, leading to the appearance of near-spherical morphology. After subjected to SPA process, the resultant multiphase hierarchical microstructure (three layers: out layer of ferrite, interlayer of SM and inner layer RA) enabled high yield strength of 1097 MPa, total elongation of 14%, and impressive impact energy of 33.3 J at -20 °C. The strengthening contribution of (V, Mo)C precipitation was estimated about 108 MPa.

Advancements in technology have revolutionized communication on social media platforms, where reviews and comments greatly influence product selection. Current opinion mining methods predominantly focus on textual content, overlooking the rich information within customer-posted images, termed here as Multus-Medium. This research introduces an innovative deep learning approach, Multus Medium Opinion Mining (MMOM), capitalizing on both text and image data for comprehensive product review analysis. MMOM employs an integrated model of Bidirectional Long Short-Term Memory (BiLSTM) and embedded Convolutional Neural Network (CNN), incorporating architectures of GoogleNet and VGGNet, thus enabling efficient extraction and fusion of textual and visual features. This synergistic approach enables data collection, preprocessing, feature extraction, fusion strategy-based feature vector generation, and subsequent product recommendation. Performance evaluation on two diverse real-world datasets name as “flicker8k” and “t4sa”. These datasets show substantial improvement over existing methods. MMOM outperforms standard benchmark models, achieving an accuracy, F1 score and ROC over fliker8k are 90.38%, 88.75% and 93.08%, whereas for twitter dataset are 88.54%, 86.34%, and 92.26% respectively, the accuracy of purposed model is 7.34% and 9.54% higher than the other two mentioned techniques. These statistics highlight the robustness and applicability of MMOM across various domains. The compelling results underscore the potential of MMOM, providing a more holistic and precise approach to opinion mining in the era of social media product reviews. This research, product recommendation helps the customer to make purchasing decision. Last but not the least, the purposed scheme can further be expanded in any other sentiment task like hospital recommendation system, crop farming recommendation and medical diagnostic system etc.

In this work, we examine the deflection angle of black hole in effective loop quantum gravity in non-plasma medium via the geometrical technique of Gibbons and Werner in weak field limits. For this, we attain the optical metric and calculate the Gaussian optical curvature and then we apply the Gauss-Bonnet theorem. We also study the influence of the plasma and dark matter mediums on the deflection angle. Further, we obtain the deflection angle by using Keeton and Petters method. We also calculate the Hawking temperature via Gauss-Bonnet theorem. In addition, we determine the fermionic greybody bounds. Moreover, we discuss the graphical behaviour of the bending angle and bounds on the greybody factor. We also examine that the results obtained for the black hole in effective loop quantum gravity are reduces to the Schwarzschild black hole solutions when dimensionless non-negative parameter $A_{\lambda}=0$.

Studies on the characteristics of hazardous air pollutants (HAPs) in the emissions of medium-duty diesel trucks are significantly insufficient compared to that on heavy-duty trucks. This study investigates the characteristics of regulated pollutants and HAPs such as volatile organic compounds (VOCs), aldehydes, and polycyclic aromatic hydrocarbons (PAHs), and estimates non-methane hydrocarbon (NMHC) speciation in the emissions of medium-duty diesel trucks. Ten medium-duty diesel trucks conforming to Euros 5 and 6 were tested for worldwide harmonized light duty driving test cycle (WLTC), new European driving cycle (NEDC), constant volume sampler (CVS)-75, and National Institute of Environmental Research (NIER)-9 using a chassis dynamometer. CO and NMHC emissions were the highest in the NEDC because of its longer low-speed driving time. NOx emissions were the highest in WLTC owing to the influence of thermal NOx in the high-speed phase. Alkanes dominated non-methane volatile compound (NMVOC) emissions owing to the low reaction of the diesel oxidation catalyst. After-treatment system, driving, and engine conditions influenced the individual components of NMVOC emissions. Formaldehyde emissions were the highest among aldehydes irrespective of driving cycles. By sampling the particle-phase of PAHs, we detected benzo(k)fluoranthene and benzo(a)pyrene and estimated the concentrations of the gas-phase PAHs with models to obtain the total PAH concentrations. The toxic equivalency quantities of benzo(k)fluoranthene and benzo(a)pyrene from NIER-9 (cold) for both Euro 5 and Euro 6 vehicles were more than five times higher than that of NIER (hot) and NEDC. In the case of NMHC speciation, formaldehyde emissions were the highest in all the driving cycles. Formaldehyde and benzene must be controlled in the emissions of medium-duty diesel trucks to reduce their health threats. The results of this study will aid in establishing a national emission inventory system for HAPs of mobile sources in Korea.

We compare Chiral Perturbation Theory (ChPT) and the Linear Sigma Model (LSM) as realizations of low energy QCD for light mesons in a chirally imbalanced medium. The relations between the low-energy constants of the Chiral Lagrangian and the corresponding constants of the Linear Sigma Model are established as well as the expressions for the decay constant of $\pi $-meson in the medium and for the mass of the $a_0$. In the large $N_c$ count taken from QCD the correspondence of ChPT and LSM is remarkably good and give a solid ground for search of chiral imbalance manifestation in pion physics. A possible experimental detection of chiral imbalance (and therefore a phase with Local Parity Breaking) is outlined in the charged pion decays inside the fireball.

Polymer flooding is one of the most successful chemical EOR methods, and is primarily implemented to accelerate oil production by sweep improvement. However, other benefits have extended the utility of polymers. During the last decade, it has been evaluated for an increasing number of fields, both offshore and onshore. This is a consequence of improved polymer properties, which extends the use to HTHS (high temperature high salinity) conditions and of improved understanding of flow mechanisms such as for heavy oil mobilization. A key issue in understanding polymer performance is to control and predict in-situ porous medium rheology. The first part of this paper reviews recent developments in understanding polymer flow in porous medium. Especially, polymer in-situ rheology and injectivity is discussed. The second part of this paper reports polymer flow experiments using the most applied polymer for EOR processes, HPAM (partially hydrolyzed polyacrylamide). The experiments address high rate near-wellbore behavior (radial flow) as well as reservoir rate steady state flow (linear flow) and discuss differences observed in terms of flow conditions. In addition, impact of oil on polymer rheology was investigated, and compared to single-phase polymer flow in Bentheimer sandstone rock material. Presence of oil leads to a reduction in apparent viscosity.

In this paper we present the measurement of charged pion two-particle femtoscopic correlation functions in $\sqrt{S_{NN}}$= 200 GeV Au+Au collisions, in 31 average transverse mass bins, separately for positive and negative pion pairs. Lévy-shaped source distributions yield a statistically acceptable description of the measured correlation functions, with three physical parameters: correlation strength parameter λ , Lévy index α and Lévy scale parameter R. The transverse mass dependence of these Lévy parameters is then investigated. Their physical interpretation is also discussed, and the appearance of a new scaling variable is observed.

Excess consumption of a high-fat diet has been identified as one of the contributing factors for obesity. Women are at higher risk for adult obesity than men, predisposing them to a different set of detrimental disease conditions. Furthermore, aging studies show that physiological decline also has a serious impact on changes in the endocrine properties of white adipose tissue. Howev-er, there is still relatively little known about the factors associated with obesity and aging and their compounding impact on women’s health. To investigate adipocytokine secretion profile changes, female C3H/HeJ mice were induced to obesity through long-term consumption of a high-fat diet. Weight gain measurements and Echo MRI analysis of fat composition showed in-creases were a due solely to the high fat content in the diet. Adipocytokine secretions were ana-lyzed in media conditioned from harvested visceral fat tissue that was organ cultured ex-vivo. Adipocytokine analysis across diets and age showed significant increases in Adiponectin and Leptin secretion in high-fat diets, accelerated increases in Resistin secretion with high-fat diets. Aging induced increased secretion of Lipcalin-2, Pentraxin-3 and Serpin E1, MCP-1 and ICAM-1, regardless of diet. Furthermore, comparisons of organoid cultured protein secretions and flash-frozen tissue samples differed greatly, suggesting the WAT organoid cultures may yield information more reflective of in situ conditions. Taken together, our results show that diet and aging significantly impact secretions from adipose tissue, that may contribute to women’s health issues.

Coffee Coffea arabica L. depends on abundantly distributed rainfall and drought impacts their development, fruit production, bean quality, and ultimately, beverage quality. Plant Biotechnology by means of genetic manipulation and plant regeneration by the somatic embryogenic process is an alternative technology to overcome these prob-lems. In the present work we used the molecular approach of the trehalose/trehalase role in plant surviving in extreme drought/salt environments. We used a cassette containing the antisense C. arabica L. trehalase gene under the RD29 promoter from A. thaliana and the NOS terminator to genetically modified an em-bryogenic coffee C. arabica L. cv typica line under osmotic stress supplemented with mannitol (0.3M) and sorbitol (0.3M) containing medium. Drought resistant SE lines were recovered and regenerate plants. Resistant SE lines showed a higher rate of competence to induce secondary SE capacity. A transcrip-tome analysis was performed from high competent SE lines to understand the acquired molecular mechanisms to developed SE. From the up-regulated genes, a PPI network made by STRING v12.0 with high confidence (0.700) revealed the presence of the 10 modules. The cell cycle, chromatin remodeling, somatic embryogenesis, oxidative stress, generic transcription pathway, carbon metabolism, phenylpropanoid biosynthesis, trehalose biosynthesis, proline bio-synthesis and glycerolipid metabolism.

We performed the accuracy assessment of three different Normalized Difference Water Indices (NDWIs) in water bodies during April 2019, a period in which floods occurred in a large proportion of the Southwest of the Buenos Aires Province (Argentina). The accuracy of the estimations using spaceborne medium-resolution multi-spectral imaging, and the reliability of three NDWIs to highlight shallow water features in satellite images, was evaluated using a high resolution airbone imagery as ground-truth. It is shown that these indices computed using Landsat 8 and Sentinel-2 imagery are only loosely correlated to the actual flooded area in shallow waters. Indeed, NDWI values vary significantly depending on the satellite mission used and the type of index computed.

The correct classification of defects originating from partial discharges (PD) in medium-voltage (MV) switchgears with air insulation (AIS) remains a challenging research topic for scientists worldwide. In this article, the authors simulated four possible defects occurring in the power industry, including one that is a simultaneous combination of two commonly ones. In addition, the correctness of the algorithm was checked by adding a classification class without any fault. The measurement signals were recorded with TEV sensors. The effectiveness of various hy-brid-connected neural networks was tested and discussed: GoogleNet and SqueezeNet based on spectrograms, SAE with FNN, 2D-CNN with LSTM, and hybrid AE combined with CNN and LSTM. The highest effectiveness – approximately 97% – was demonstrated by the GoogleNet and SqueezeNet networks. The research results are expected to form the basis for the development of a universal and wireless capacitive sensor for monitoring the level of PD in switchgears.

To contribute to small and medium enterprises (SMEs) sustainable transition into the circular economy, the study proposes the activation of organizational learning (OL) processes – denoted here as multi-level knowledge creation, transfer, and retention processes – as a key phase in introducing circular business models (CBMs) at SME and supply chain (SC) level. The research employs a mixed-method approach, using the focus group methodology to identify contextual elements impacting on CBM-related OL processes, and a survey-based evaluation to single out the most frequently used OL processes inside Italian construction SMEs. As main result, a CBM-oriented OL multi-level model offers a fine-grained understanding of contextual elements acting mutually as barriers and drivers for OL processes, as possible OL dynamics among them. The multi-level culture construct – composed of external stakeholders’, SC stakeholders’, and organizational culture – identify the key element to activate CBM-oriented OL processes. Main implications are related to the identification of cultural, structural, regulatory, and process contextual elements across the external, SC, and organizational levels, and their interrelation with applicable intraorganizational and interorganizational learning processes. The proposed model would contribute to an improved implementation of transitioning into the circular economy utilizing sustainable business models in the construction SMEs.

Tissue regeneration is an essential requirement for wound healing and recovery of organs’ dysfunction. It has been demonstrated that wound healing can be facilitated by activating paracrine signaling mediated by exosomes secreted from stem cells, since exosomes deliver many functional molecules including growth factors (GFs) and neurotrophic factors (NFs) effective for tissue regeneration. In this study, an exosome-rich conditioned medium (ERCM) was collected from human amniotic membrane stem cells (AMSCs) by cultivating the cells under a low oxygen tension (2% O2 and 5% CO2). The contents of GFs and NFs including keratinocyte growth factor, epidermal growth factor, fibroblast growth factor 1, transforming growth factor-β, and vascular endothelial growth factor responsible for skin regeneration were much higher (10-30 folds) in the ERCM than in normal conditioned medium. In was found that CM-DiI-labeled exosomes readily entered keratinocytes and fibroblasts, and that ERCM not only facilitated the proliferation of keratinocytes in normal condition, but also protected against H2O2 cytotoxicity in a concentration-dependent manner. In cell-migration assay, the scratch wound in keratinocyte culture dish was rapidly closed by treatment with ERCM. Such wound-healing effects of ERCM were confirmed in a rat whole skin-excision model: i.e., the wound closure was significantly accelerated by topical application of ERCM solution (4 x 109 exosome particles/100 μL) at 4-day intervals. In the wounded skin, the deposition of collagens was enhanced by treatment with ERCM, which was supported by the increased production of collagen-1 and collagen-3. The results indicate that ERCM from AMSCs containing a large amount of GFs and NFs improve wound healing through tissue regeneration not only by facilitating keratinocyte proliferation for skin repair, but also activating fibroblasts for extracellular matrix production.

This paper is devoted to compute the weak deflection angle for Kalb-Ramond traversable wormhole solution in plasma and dark matter mediums by using the method of Gibbons and Werner. To acquire our results, we evaluate Gaussian optical curvature by utilizing the Gauss-Bonnet theorem in the weak field limits. We also investigate the graphical influence of deflection angle $\tilde{\alpha}$ with respect to the impact parameter $\sigma$ and minimal radius $r_0$ in plasma medium. Moreover, we derive the deflection angle by using different method known as Keeton and Petters method. We also examine that if we remove the effects of plasma and dark matter, the results become identical to that of non-plasma case.

Tissue regeneration is an essential requirement for wound healing and recovery of organs’ function. It has been demonstrated that wound healing can be facilitated by activating paracrine signaling mediated by exosomes secreted from stem cells, since exosomes deliver many functional molecules including growth factors (GFs) and neurotrophic factors (NFs) effective for tissue regeneration. In this study, an exosome-rich conditioned medium (ERCM) was collected from human amniotic membrane stem cells (AMSCs) by cultivating the cells under a low oxygen tension (2% O2 and 5% CO2). The contents of GFs and NFs including keratinocyte growth factor, epidermal growth factor, fibroblast growth factor 1, transforming growth factor-β, and vascular endothelial growth factor responsible for skin regeneration were much higher (10-30 folds) in the ERCM than in normal conditioned medium (NCM). In was found that CM-DiI-labeled exosomes readily entered keratinocytes and fibroblasts, and that ERCM not only facilitated the proliferation of keratinocytes in normal condition, but also protected against H2O2 cytotoxicity. In cell-migration assay, the scratch wound in keratinocyte culture dish was rapidly closed by treatment with ERCM. Such wound-healing effects of ERCM were confirmed in a rat whole skin-excision model: i.e., the wound closure was significantly accelerated, remaining minimal crusts, by topical application of ERCM solution (4 x 109 exosome particles/100 μL) at 4-day intervals. In the wounded skin, the deposition of collagens was enhanced by treatment with ERCM, which was supported by the increased production of collagen-1 and collagen-3. In addition, enhanced angiogenesis in ERCM-treated wounds was confirmed by increased von Willebrand factor (vWF)-positive endothelial cells. The results indicate that ERCM from AMSCs with high concentrations of GFs and NFs improves wound healing through tissue regeneration not only by facilitating keratinocyte proliferation for skin repair, but also activating fibroblasts for extracellular matrix production, in addition to the regulation of angiogenesis and scar tissue formation.

Observations of ocean surface winds from Indian scatterometer SCATSAT-1 have been combined with background wind field from a numerical weather prediction (NWP) model available at National Centre for Medium Range Weather Prediction (NCMRWF) to generate a 6-hourly gridded hybrid wind product. A distinctive feature of the study is to produce a global gridded wind field from SCATSAT-1 scatterometer passes with spatio-temporal data gaps at regular synoptic hours relevant for forcing models and other NWP studies. This is done by making use of concepts from the modern particle filter technique, which does not represent the model probability density function (PDF) following the Gaussian technique. The 6 hourly hybrid wind is generated for the entire year of 2018 and is validated using the wind speed from daily gridded level-4 SCATSAT-1 winds (L4AW), Cross Calibrated Multi-Platform dataset (CCMP) and global buoy data from National Data Buoy Centre (NDBC). The results indicate potential of the technique to produce scatterometer winds at the desired temporal frequency with significantly less noise and along swath biases. The study shows the generated hybrid winds have very high quality with respect to the already existing daily product available from ISRO.

Market turbulence with fiscal investment influences has altered IT infrastructure performance as business pursue extravagant new technology adoption. Yet, few studies have examined how shareware solution goes beyond Medium Size Enterprise that pushes efficiency and sustainability. This PLS-SEM integrated with dual primary compilation approach lessens shallow perceptions coupled with outlooks that streamline each phenomenal activity that is worthy of the necessity for competitive innovation. This unified model was applied to sampling respondents and analyzed using an ordinal regression relationship that generates a robust association that triggers the hypothesis acceptance. The adopting of BOINC shareware mesh network towards unified processing designs that were employed to build the yield by promising financial possibility using coordinated interworks hence improved group accomplishment and establishing greater esteem. This paper showcases a flexible inner IT infrastructure alongside the economic uncertainty with the framework advancement for Exostructure as a Service. Associated theoretical and practical implications were discussed.

Polyaromatic hydrocarbons (PAHs) are widespread in the interstellar medium (ISM). The abundance and relevance of PAHs call for a clear understanding of their formation mechanisms, which, to date, have not been completely deciphered. Of particular interest is the formation of benzene, the basic building block of PAHs. It has been shown that ionization of neutral clusters can lead to an intra-cluster ionic polymerization process that results in molecular growth. Ab initio molecular dynamics (AIMD) studies in clusters consisting of 3–6 units of acetylene modeling ionization events under ISM conditions have shown maximum aggregation of three acetylene molecules forming bonded C6H6+ species: the larger the number of acetylene molecules, the higher the production of C6H6+. These results lead to the question of whether clusters bigger than those studied thus far promote aggregation beyond three acetylene units, and whether larger clusters can result in higher C6H6+ production. In this study, we report results from AIMD simulations modeling the ionization of 10 and 20 acetylene clusters. The simulations show aggregation of up to four acetylene units producing bonded C8H8+. Interestingly, C8H8+ bicyclic species were identified, setting precedent for their astrochemical identification. Comparable reactivity rates were shown with 10 and 20 acetylene clusters.

Horses are high performance athletes prone to sportive injuries such as tendonitis and desmitis. The formation of fibrous tissue in tendon repair becomes a therapeutic challenge to overcome. This impels regenerative medicine to develop innovative therapies that enhance tissue regenera-tion retrieving original tissue properties. Multipotent Mesenchymal Stem/ Stromal Cells (MSCs) have been successfully used to develop therapeutic products, as they secrete a variety of bioac-tive molecules that play a pivotal role in tissue regeneration. These factors are released in cul-ture media producing conditioned media (CM). The aforementioned assumptions led to the formulation of equine synovial membrane MSCs (eSM-MSCs) – the cellular pool that naturally regenerates joint tissue, combined with medium enriched in immunomodulatory factors (among other bioactive factors) produced by umbilical cord stroma-derived MSCs (eUC-MSCs), that nat-urally contribute to suppress the immune rejection in the maternal-fetal barrier. A clinical case of an equine acute desmitis, treated with this formulation is presented. Ultrasonographic ligament regeneration occurred in a reduced time frame, reducing stoppage time and allowing return to unrestricted competition after completion of a physical rehabilitation program. This study fo-cused on the determination of the formulation therapeutic potential and the evaluation of its synergistic effect in an equine desmitis treatment, utilizing the cells themselves and its secretome.

Horses are high performance athletes prone to sportive injuries such as tendonitis and desmitis. Fibrous tissue formation with loss of mechanical properties occurs in tendon repair, becoming a therapeutic challenge to overcome. This impels regenerative medicine to develop innovative therapies that enhance tissue regeneration retrieving original tissue properties. Mesenchymal stem cells (MSCs) have been successfully used to develop therapeutic products. They secrete a variety of bioactive molecules that play a pivotal role in tissue regeneration. These factors are released in culture media producing conditioned media (CM). The aforementioned assumptions impelled us to formulate equine synovial membrane stem cells (eSM-MSCs) – the cellular pool that naturally regenerates joint tissue, combined with medium enriched in immunomodulatory factors produced by umbilical cord stroma-derived MSCs (eUC-MSCs), that naturally contribute to suppress the immune rejection in the maternal-fetal frontier. A clinical case of an equine acute desmitis, treated with the abovementioned formulation is presented. Ligament regeneration occurred in a reduced time frame, reducing stoppage time, allowing return to unrestricted competition after completion of a physical rehabilitation program. This study focus was determination of the formulation therapeutic potential and the evaluation of its synergistic effect in an equine desmitis treatment, utilizing the cells themselves and its secretome.

Cross-border e-commerce is an opportunity for micro, small and medium sized enterprise (MSMEs) in developing countries. Based on a resource-based approach, this research studied how to support resource lacking enterprises with export marketing strategy. It dealt with actual business cases of Mongolian entrepreneurs trying to export Mongolian products to Korean market. Multiple source data including interviews, internal documents, and group discussions, were matched with theories to come up with strategies and validated by supporting organizations in Mongolia and Korea. The research suggests that MSMEs should rely on third party digital platforms rather than setting up their own. For product strtategy of the marketing mix, sellecting competitive product categories and supporting them adjusting to foreign markets and quality assurance is needed. For price strategy, loccally high priced products should use a price penetration strategy with a lower price compared to competing foreign products. For place strategy, supporting organizations should partner with exporters for collective delivery. For promotion strategy, they need to support the capacity of MSMEs enabling them to use digital marketing tools effectivly. These strategies were validated and adopted by supporting organizations in Monglia and Korea.

Carbon supported nanoparticles of monometallic Ni catalyst and binary Ni-Transition Metal (Ni-TM/C) electrocatalytic composites were synthesized via chemical reduction method, where TM stands for the doping elements Fe, Co, and Cu. The chemical composition, structure and morphology of the Ni-TM/C materials were characterized by X-ray photoelectron spectroscopy (XPS), X-ray diffractometry (XRD), transmission electron microscopy (TEM), scanning transmission electron microscopy (STEM) and energy-dispersive X-ray spectroscopy (EDS). The electrochemical properties towards hydrogen oxidation reaction in alkaline medium were studied using the rotating disc electrode and cycling voltammetry methods. A significant role of the TM dopant in the promotion of the hydrogen electrooxidation kinetics of the binary Ni-TM/C materials were revealed. A record-high in exchange current density value of 0.060 mA cm²_Ni was measured for Ni₃Fe₁/C, whereas the monometallic Ni/C counterpart has only shown 0.039 mA cm²_Ni. In order to predict the feasibility of the electrocatalysts for hydrogen chemisorption, density functional theory was applied to calculate the hydrogen binding energy and hydroxide binding energy values for bare Ni and Ni₃TM₁.

We examine here characteristics of electromagnetic waves that propagate through an unbounded space filled with a homogeneous isotropic chiral medium. Resulting characters are compared to those of the electromagnetic waves propagating through an achiral free space. To this goal, we form energy conservation laws for key bilinear parameters in a chiral case. Due to a nonzero medium chirality, conservation laws turn out to contain extra terms that are linked to the spin-orbit coupling, which is absent for an achiral case. As an example, we take a plane wave for achiral case to evaluate those bilinear parameters. Resultantly, the conservation laws for a chiral case are found to reveal inconsistencies among several bilinear parameters that constitute the con-servation laws , thereby prompting us to establish partial remedies for formulating proper wave-propagation problems.

Articular cartilage healing and repair is one of the biggest clinical challenges in trauma and orthopaedic medicine, leading to high economic loss due to athletic impairment in sport horses. Multipotent Mesenchymal stem/stromal cells are part of novel therapeutic arsenal aimed at tissue regeneration and restoring organ function. These cells release biomolecules and factors in the culture media, producing the so called conditioned medium, which have a pro-regenerative effect through paracrine mechanisms. Considering this, a therapeutic product combining equine synovial membrane derived Mesenchymal stem/stromal cells and equine umbilical cord stroma-derived Mesenchymal stem/stromal cells conditioned medium was employed. In this work the treatment of two articular defects, in the first phalanx and third metacarpus of the left front limb of a five-year-old horse, is described. Following surgical debridement of the lesions, the treatment comprised two intra-articular administrations of the above-mentioned therapeutic combination, 15 days apart. This was followed by a thorough rehabilitation program. A second-round treatment was performed 6 months later. Diagnostic imaging demonstrated significant improvement of the articular defects. The clinical outcome allowed a full return to the athletic performance demonstrating the safety and potential advantages of this approach when compared with other therapeutic options.

Improving the effectiveness of health interventions is a major challenge in public health research and program development. A large body of literature has found low or no impact of health education and promotional interventions. We aim to develop a conceptual framework in support of intervention designs for preventive health behavior improvement programs and outcomes. The proposed approach is based on a narrative review of empirical literature assessing the limitations of less effective or ineffective field experiments regarding preventive health education and promotion interventions. We found three major limitations regarding the mental model’s balance of treatment and comparison groups, treatment groups’ willingness to adopt suggested behaviors, and the type, length, frequency, intensity, and sequence of treatments. To minimize the influence of these concerns, we propose a mental model-based repeated multifaceted (MRM) intervention design framework to provide an intervention design for improving health education and promotional programs.

Cell secretome has been explored as a cell-free technique with high scientific and medical interest for Regenerative Medicine. In this work, the secretome produced and collected from Olfactory Mucosa Mesenchymal Stem Cells and Olfactory Ensheating Cells was analyzed and therapeutically applied to promote peripheral nerve regeneration. The analysis of the conditioned medium revealed the production and secretion of several factors with immunomodulatory functions, capable of intervening beneficially in the phases of nerve regeneration. Subsequently, the conditioned medium was applied to sciatic nerves of rats after neurotmesis, using Reaxon^® as tube-guides. Over 20 weeks, the animals were subjected to periodic functional assessments, and after this period, the sciatic nerves and cranial tibial muscles were evaluated stereologically and histomorphometrically, respectively. The results obtained allowed to confirm the beneficial effects resulting from the application of this therapeutic combination. The administration of conditioned medium from Olfactory Mucosal Mesenchymal Stem Cells led to the best results in motor performance, sensory recovery, and gait patterns. Stereological and histomorphometric evaluation also revealed the ability of this therapeutic combination to promote nervous and muscular histologic reorganization during the regenerative process. The therapeutic combination discussed in this work shows promising results and should be further explored to clarify irregularities found in the outcomes and to allow establishing the use of cell secretome as a new therapeutic field applied in the treatment of peripheral nerves after injury.

During the conceptual and preliminary design stage of a ship, designers need to ensure that the selected principal dimensions and parameters are good enough to deliver a stable ship (statically and dynamically) besides deadweight and speed. To support this, the initial intact stability of the proposed ship is required to be calculated, and in doing so, the lightship weight and its detailed breakdown are necessary to be known. After hull steel weight, machinery weight, mainly, marine propulsion and power generation machinery, play a vital role in the lightship weight estimate of a ship due to its robustness. The correct estimation of respective weights improves the accuracy of calculating a ship's initial stability typically to be designed and built. Hence, it would be advantageous for the designer to convince the ship owner. A total of 3006 marine propulsion (main marine diesel) engines and 348 power generation (auxiliary marine diesel) engines/generators of various power output (generators output for auxiliary engines), engine RPM and cylinder number of different engine makers are collected. These are analyzed and presented in both tabular and graphical forms to demonstrate the possible relationship between marine propulsion engine weight and power generation engine weight, and their respective power output, RPM, cylinder number, power-RPM ratio and power-RPM ratio per cylinder.In this article, the authors have attempted to investigate the behavior of marine propulsion engine weight and power generation engine/generator weight regarding engine power output, generator power output, engine RPM and cylinder number (independent variables). Further attempts have been made to identify those independent variables that influence the weight of the marine propulsion engine and power generation engine/generator (dependent variables), and their interrelationships. A mathematical model has thus been developed and proposed, as a guiding tool, for the designer to estimate the weight of main and auxiliary engines more accurately during the conceptual and preliminary design stage.