This study delves into the performance evaluation of an avant-garde technology in mobile communications known as Large Intelligent Surface (LIS), poised to be an integral component of the sixth-generation (6G) networks. This groundbreaking technology has the potential to markedly augment the Signal-to-Interference plus Noise Ratio (SINR) by orchestrating signals originating from the base station through a network of digitally controlled reflectors meticulously engineered to modulate the phase of incoming electromagnetic waves. A LIS can establish a Line of Sight (LoS) within channels that inherently do not have a LoS. In addition, it can also be optimized to increase transmission security by ensuring that the signal reaches only the target users of the message with better quality. In this study, analytical expressions were derived to calculate the distribution parameters, the bit error probability, and the secrecy outage probability. These calculations consider the presence of an eavesdropper link, highlighting the potential of the LIS to increase the confidentiality of digital communication systems. The accuracy of the proposed formulas was demonstrated by showing how the performance of the LIS varies with different design parameters and environmental fading.

This paper presents a design and performance analysis of a 10-element 5G massive MIMO antenna array for sub-6GHz mobile handsets, specifically for LTE bands 42 (3400-3600 MHz), 43 (3600-3800 MHz), 48/49 (3550-3700 MHz) applications. The proposed antenna array consists of 10 closely spaced linearly polarized inverted-F antennas with a compact size of 20 × 9 mm2 of a single element. The proposed antenna array provides high gain, high efficiency, and low correlation between the antenna elements, which results in improved channel capacity, increased data rate, and enhanced signal quality. The performance of the antenna array is evaluated in terms of the radiation pattern, gain, efficiency, and correlation coefficient. The simulation and measured results show that the proposed antenna array achieves an approximate peak gain of 3.1 dBi at the resonance frequency, a total efficiency of 65 %, and a low correlation coefficient of 0.06 between the antenna elements. Therefore, the proposed 5G massive MIMO antenna array is a promising candidate for sub-6 GHz mobile handsets, particularly for LTE bands 42/43/48/49 applications.

Finding a good MIMO system model also major issue in Wireless Communication system. It is facing with so many problem, one of the major problem is finding good system model in terms of capacity and transmitting antenna system. In this paper, we analyze the channel capacity of various MIMO system model with some constant SNR level and outage probability. We establish a novel idea for MIMO system models as consider as 2^N- MIMO system model and find-out change in channel capacity when different transmitting antennas with constant SNR and outage probability. The channel capacity ratio CC_R is presented here on the basis of 2^N- MIMO channel capacity model. Number of transmitted antenna presented in MIMO system is increases is well-known however paper shows change in capacity in simple form.

This paper presents the design and realization of a simple and low-profile, 4-port Multiple-Input-Multiple-Output (MIMO) antenna operating in the mm-wave band supporting 5G communication technologies. As part of the design methodology, the initial stage involved the development of a conventional monopole patch antenna optimized for operation at 26 GHz, which is matched to 50 Ω stepped feed line. Afterward, a square-shaped Defected Ground Structure (DGS) with semi-circles slots on the edges is placed on the ground to improve the isolation and the circular and rectangular slots are incorporated as DGS to optimize the antenna impedance bandwidth. Etching semi-circular shaped slots on the ground plane achieved more then 34.2 dB isolation in the 26 GHz operating band. In addition, an arrangement of four symmetrical radiating elements is positioned orthogonally to minimize the antenna’s physical size and to improve the isolation. The proposed MIMO antenna overall dimension is 25 × 25 mm2, which is printed on Rogers 5880 substrate with a width of 0.787 mm and εr = 2.2. The proposed antenna covers the 5G mm-wave band with a 10 dB bandwidth ranging from 25.28 - 28.02 GHz, whereas the maximum gain attained for the purposed structure is 8.72 dBi. Moreover, the proposed design, simulated and measured with advantages such as high isolation, low ECC, simple and compact design, is a good candidate for usage areas such as smart devices, mobile phones, and sensors in 5G applications.

In this paper, we identify issues and possible solutions in the key area of large-scale antenna systems, also know as Massive Multiple Input Multiple Output (MIMO) systems. Additionally, we propose the use of Massive MIMO technology as a means to tackle the uplink mixed-service communication problem. Under the assumption of an available physical narrowband shared channel (PNSCH), the capacity of the MTC network and, in turn, that of the whole system, can be increased by grouping Machine-Type Communication (MTC) devices into clusters and letting each cluster share the same time-frequency physical resource blocks. We study the feasibility of applying sub-optimal linear detection to the problem of detecting a large number of MTC devices sharing the same time-frequency resources at the uplink of a base station (BS) equipped with a large number of antennas, M. In our study, we derive the achievable lower-bound rates for the studied sub-optimal linear detectors and show that the transmitted power of each MTC device can be reduced as M increases, which is a very important result for powerconstrained MTC devices running on batteries. Our simulation results suggest that, as M is made progressively larger, the performance of sub-optimal linear detection methods approach the matched filter bound, also known as perfect interference-cancellation bound.

In this letter, we advocate that it is possible to mitigate Pilot Contamination in Massive MIMO systems by scrambling the pilot sequences with a Base Station (BS) scrambling sequence. It is possible if a set of sequences is carefully designed to meet the orthogonality property defined in this letter. Each BS possesses its own scrambling sequence that can be reused the same way frequency reuse is applied to cell deployment. The main advantage of the prosed pilot generation scheme is that the frequency reuse factor can be set to 1, the most aggressive one, while the scrambling sequences can be reused with much less aggressive reuse factors (e.g. 4, 7, 9, 12, etc.), which in consequence results in pilot contamination mitigation and increased system's performance.

MIMO (multiple-input multiple-output) radar provides much more flexibility than the traditional radar for its ability to realize far more observation channels than the actual number of T/R (transmit and receive) elements. Designing the array of MIMO imaging radar, the commonly used virtual array theory generally assumes that all elements are placed on the same line. However, due to the physical size of the antennas and coupling effect between T/R elements, a certain height difference between T/R arrays is essential, resulting in the defocusing of edge points of the scene. On the other hand, the virtual array theory implies far-field approximation, leading to inevitable high grating lobes in the imaging result of near-field edge points of the scene observed by common MIMO array. To tackle these problems, this paper derives the relationship between target’s PSF (point spread function) and pattern of T/R arrays, by which the design criterion of near-field imaging MIMO array is presented. Firstly, the proper height between T/R arrays is designed to focus the near-field edge points well. Secondly, the far-field array is modified to suppress the grating lobes in the near-field area. Finally, the validity of the proposed methods is verified by simulations and an experiment.

Let R be a commutative ring and m, n be positive integers. We define a proper submodule N of an R-module M to be (m,n)-closed if for r∈R and b∈M, r^{m}b∈N implies rⁿ∈(N:_{R}M) or b∈N. This class of submodules lies properly between the classes of prime and primary submodules. Many characterizations, properties and supporting examples concerning this class of submodules are provided. The notion of (m,n)-modules is introduced and characterized. Furhermore, the (m,n)-closed avoidance theorem is proved. Finally, the (m,n)-closed submodules in amalgamated modules are studied.

This paper proposes the use of compressive sensing to tackle the Massive MIMO channel estimation problem. As our results show compressive sensing-based estimators perform as well as the optimum MMSE estimator.

The current paper provides a cutting-edge information data length- theoretic approach to the transient M/M/Infinity queueing system. This is a first time ever investigation that unifies information data length and queueing theories. The significant impact of both time and the number of states for the transient M/M/ Infinity queue on both the upper and lower bounds of the obtained information data length is observed and noted. The paper concludes with some challenging open problems, combined with concluding remarks and future research pathways.

In this paper, we dive into the exciting world of wireless communication, focusing on how millimeter-wave technology and Multiple-Input Multiple-Output phased array antennas are shaping the future of 5G and the upcoming 6G technologies. We cover the latest advancements in millimeter-wave and beam-forming technologies, emphasizing their role in enhancing network security and efficiency in automotive vehicles through dual radar communication. Our discussion spans the benefits, applications, challenges, and solutions of these technologies individually from millimeter-wave to beam-forming technology and joint radar communications, alongside a look at their theoretical and practical implementations. We emphasize the integration of beam-forming technology in joint radar communications for future automotive vehicles and its impact on automotive systems, smart cities, and the Internet of Things (IoT). Looking ahead, we discuss the potential of these technologies to transform future tech landscapes, while also addressing the security implications of merging communication and radar capabilities. This paper aims to provide a clear view of the advancements and prospects of millimeter-wave, beam-forming, and dual radar communication technologies.

A two element Multiple Input Multiple Output UWB (Ultra-wide band) antenna is presented in this paper. The antenna is backed by the FR-4 substrate with a thickness of 1.6 mm and dielectric constant of 4.3 covering an area of 52.8 × 29 mm2. The proposed MIMO antenna consists of two single UWB antennas and a stub placed between the two antennas to reduce the mutual coupling. The proposed antenna achieves the voltage standing wave ratio (VSWR) of less than 2 and more than 86% radiation efficiency over the whole band of interest. Performance of the antenna is examined using both simulation and experiment. The design exhibits good performance characteristics in terms of bandwidth, gain, efficiency, return loss and VSWR. The proposed antenna is analyzed using the CST Microwave Studio software. The prototype model of the antenna is fabricated, tested, and measured to validate the simulation return loss results. There is acceptable agreement between the measured and simulated results.

The use of large-scale antenna arrays grants considerable benefits in energy and spectral efficiency to wireless systems due to spatial resolution and array gain techniques. By assuming a dominant line-of-sight environment in a massive MIMO scenario with favorable propagation, we derive analytical expressions for the sum-capacity. % Then, we show that convenient simplifications on the sum-capacity expressions are possible when working at low and high SNR regimes. % Furthermore, in the case of a high SNR regime, it is demonstrated that the Gamma PDF can approximate the PDF of the instantaneous channel sum-capacity as the number of BS antennas grows. A second important demonstration presented in this work is that a Gamma PDF can also be used to approximate the PDF of the summation of the channel's singular values as the number of devices increases. Finally, it is important to highlight that the presented framework is useful for LPWAN's as we show that the transmit power of each device can be made inversely proportional to the number of BS antennas.

Human tuberculosis (TB) is caused mainly by Mycobacterium tuberculosis (MTB) and M. africanum (MAF) remains a major global health threat. The varying response of different host to contact with the TB bacteria, indicates the importance of host genetics in susceptibility to TB disease. We explored the association among selected human/host genomic variants and disease caused by the two causative pathogens in Ghana through a case control study. MTBC isolates (323) recovered from pulmonary TB patients recruited between 2016 and 2018 were genotyped using spoligotyping. A selection of 29 SNPs from MTB-related genes with high frequency among African populations were genotyped using a TaqMan® SNP Genotyping Assay and iPLEX Gold Sequenom Mass Genotyping Array. Associations between MTBC lineages and host variables were assessed using univariate and multivariate logistic regression. The prevalence of MTB and Maf among the participants were 79% and 21% respectively. Association analysis between the controls and MAF showed that rs2695342 variant on the SIC11A1 gene have the propensity to confer susceptibility to MAF infections (P = 0.093, OR = 8.35, 95% CI = 0.70 – 99.24) whilst the rs17048476 (P = 0.088, OR = 1.57, 95% CI = 0.93 – 2.63) and rs1482868 (P = 0.095, OR = 0.60, 95% CI = 0.33 – 1.09) were observed to be only suggestive. Our findings implicate SLC11A1 as a potential susceptibility gene of substantial interest for TB caused by MAF which is an important pathogen in West Africa and highlight the need for in-depth host pathogen studies in West Africa.

This paper uses the $\exp(-\Phi(\xi))$-Expansion method to investigate solitons to the M-fractional nonlinear Schrödingers equation with cubic nonlinearity. The results obtained are dark solitons, trigonometric function solutions, hyperbolic solutions and rational solutions. Thus, the constraint relations between the model coefficients and the traveling wave frequency coefficient for the existence of solitons solutions are also derived.

This paper analyzes the potential strategies for a bank merger from a Sustainable Development Goals (SDG) perspective, focusing on three key criteria: profitability, market share, and service quality. In the short-term, the merged bank should prioritize optimizing financial performance through cost management, revenue stream identification, and risk management practices. Market share expansion can be achieved through targeted customer acquisition and retention efforts, market research, and competitive analysis. Service quality can be enhanced through improved customer service, efficient complaint resolution processes, and leveraging technology. These short-term plans align the merged bank's operations with the identified criteria and promote responsible banking practices that contribute towards the SDGs. In the long-term, the merged bank should focus on diversifying revenue streams, expanding its customer base, and optimizing cost structure. Long-term strategies should include establishing a strong brand presence, customer loyalty programs, and continuous improvement in service quality. The paper emphasizes the importance of monitoring progress, making necessary adjustments, and aligning with SDGs for sustained profitability and long-term success in the marketplace. The findings of this study provide valuable insights for banks considering a merger and highlight the significance of considering SDGs in their strategic planning.

This work presents a unique two-element high-isolated orthogonally CPW-fed UWB Multiple Input Multiple Output (Ultra-wideband) antenna. The antenna is supported by the 52.8 × 29 mm2 FR-4 substrate, which has a dielectric constant of 4.3 and a thickness of 1.6 mm. The suggested MIMO antenna reduces mutual coupling by separating the two single UWB antennas that make up the antenna. The suggested antenna achieves a voltage standing wave ratio (VSWR) of less than two and more than 86% radiation efficiency over the whole range of interest. The antenna's performance is assessed using both modeling and experimentation. Return loss, efficiency, gain, bandwidth, and Voltage Standing Wave Ratio (VSWR) are all factors in which the design performs well. The suggested antenna is evaluated using the CST Microwave Studio. The antenna prototype model is constructed, tested, and measured in order to validate the simulation return-loss results. There is good agreement between the measured and simulated results.

The performance of modern wireless communication systems is highly dependent on the adoption of multiple antennas and the associated signal processing. In 5G and 6G networks, beamforming and beam management become challenging tasks due to aspects such as user mobility, increased number of antennas, and the adoption of higher frequencies. Artificial intelligence, and more specifically, machine learning, are efficient tools to reduce the complexity involved in generating beams and the overhead associated with beam management without sacrificing system performance. Therefore, AI-aided beamforming and beam management have received a lot of attention recently. This article presents a complete survey on this topic, emphasizing open problems and promising directions. The discussion includes architectural and signal processing aspects of modern beamforming and beam management. The article presents communication problems and respective solutions using centralized/decentralized, supervised/unsupervised, semi-supervised, active, federated, and reinforcement learning.

The lattice reduction aided(LRA) algorithm has attracted widely attention of researchers in MIMO systems because of its low complexity to achieve full diversity. However, most lattice reduction auxiliary algorithms do not directly improve system performance. In this paper, a modified lattice reduction successive interference cancellation (SIC) algorithm is proposed for MIMO OFDM system mild changing the complexity of LRA algorithm. At present, the MMSE SQRD algorithm has the problem of regarding too much useful signals as the residual interference which cannot be cancelled by successive interference cancellation. Since the diagonal elements of useful signals are non-zero, the components of the symbols to be detected still present in the interference term, treating all the signals as interference will be resulted in performance loss. To solve this problem, the modified matrix is proposed.by moving this symbol component into the signal term, the proposed algorithm can provide the better performance than MMSE SQRD algorithm. The analysis shows that the LRA-MMSE-SIC algorithm of proposed in this paper significantly improves the system performance with mild increasing the complexity. The simulation results show that the performance of the proposed algorithm is improved by 1dB and 8dB compared with the comparison algorithm when the bit error rate is 10−3.

Accurate channel estimation is of utmost importance for massive MIMO systems that allow providing significant improvements in spectral and energy efficiency. In this work, we investigate the spectral efficiency performance and present a channel estimator for multi-cell massive MIMO systems subjected to pilot-contamination. The proposed channel estimator performs well under moderate to aggressive pilot contamination scenarios without prior knowledge of the inter-cell large-scale channel coefficients and noise power. The estimator approximates the performance of a linear Minimum Mean Square Error (MMSE) as the number of antennas increases. Following, we derive a lower bound closed-form spectral efficiency of the Maximum Ratio Combining (MRC) detector in the proposed channel estimator. The simulation results highlight that the proposed estimator performance approaches the linear minimum mean square error (LMMSE) channel estimator asymptotically.

Accurate channel estimation is of utmost importance for massive MIMO systems to provide significant improvements in spectral and energy efficiency. In this work, we present a study on the distribution of a simple but yet effective and practical channel estimator for multi-cell massive MIMO systems suffering from pilot-contamination. The proposed channel estimator performs well under moderate to aggressive pilot contamination scenarios without previous knowledge of the inter-cell large-scale channel coefficients and noise power, asymptotically approximating the performance of the linear MMSE estimator as the number of antennas increases. We prove that the distribution of the proposed channel estimator can be accurately approximated by the circularly-symmetric complex normal distribution, when the number of antennas, M, deployed at the base station is greater than 10.

In this brief letter we report our initial results on the application of deep-learning to the massive MIMO channel estimation challenge. We show that it is possible to estimate wireless channels and that the possibility of mitigating pilot-contamination with deep-learning is possible given that the leaning model underwent an extensive training-phase and that it has been presented with a large number of different channel conditions.

Let R be a commutative ring with identity and m, n be positive integers. In this paper, we introduce the class of (m,n)-prime ideals which lies properly between the classes of prime and (m,n)-closed ideals. A proper ideal I of R is called (m,n)-prime if for a,b∈R, a^{m}b∈I implies either aⁿ∈I or b∈I. Several characterizations of this new class with many examples are given. Analougus to primary decomposition, we define the (m,n)-decomposition of ideals and show that every ideal in an n-Noetherian ring has an (m,n)-decomposition. Furthermore, the (m,n)-prime avoidance theorem is proved.

Tuberculosis (TB) remains a major public health threat globally, especially in sub-Saharan Africa. Both human and Mycobacterium tuberculosis (MTBC) genetic variation affect TB outcomes, but few studies have examined if and how the two genomes interact to affect disease. We hypothesize that long-term coexistence between human genomes and MTBC lineages modulate disease to affect its severity. We examined this hypothesis in our TB household contact study in Kampala, Uganda, in which we identified 3 MTBC lineages of which one, L4.6-Uganda, is clearly derived and hence recent. We quantified TB severity using the Bandim TBscore and examined the interaction between MTBC lineage and human single nucleotide polymorphisms (SNPs) genome-wide, in two independent cohorts of TB cases (N=149 and N=127). We found a significant interaction between a SNP in PPIAP2 and the Uganda lineage (combined p=4x10-8). PPIAP2 is a pseudogene that is highly expressed in immune cells. Pathway and eQTL analyses indicated potential roles between coevolving SNPs and cellular replication and metabolism as well as platelet aggregation and coagulation. This finding provides further evidence that host-pathogen interactions affect clinical presentation differently than host and pathogen genetic variation independently, and that human-MTBC coevolution is likely to explain patterns of disease severity.

Among the sensors necessary to equip vehicles with an autonomous driving system, there is a tacit agreement that cameras and some type of radar would be essential. The ability of radar to spatially locate objects (pedestrians, other vehicles, street furniture and traffic signs) makes it the most economical complement to the cameras in the visible spectrum, in order to give the correct depth to scenes. From the echoes obtained by the radar, some data fusion algorithm will try to locate each object in its correct place within the space surrounding the vehicle. In any case, the usefulness of the radar will be determined by several performance parameters, such as its aver-age error in distance, the maximum errors and the number of echoes per second it can provide. In this work we have tested experimentally the AWR1843 MIMO radar from Texas Instruments to measure those parameters.

For massive multiple-input multiple-output (MIMO) communications, the minimum mean square error (MMSE) scheme provides close to optimal recognition but involves inverting the high-dimensional matrix. A Gauss-Seidel (GS) detector based on conjugate gradient and Jacobi iteration (CJ) joint processing is introduced to address this problem. Firstly, the signal is initialized with the best of the three initialization regimes for faster algorithm convergence. Secondly, the signal is processed together with CJ. Finally, the pre-processed result is transferred to the GS detector. The simulation results indicate that the proposed iterative algorithm has a lower BER performance than the GS and improved iterative scheme based on GS in channels with different correlation levels.

UAV (Unmanned aerial vehicle) communication offers the possibility to establish the new net-works. To overcome the PE (pointing error) and beam misalignment of millimeter-wave massive MIMO (Multiple-in multiple-out)/FSO (Free Space Optical) caused by UAV jitter, a Tensor-train decomposition based hybrid beamforming for millimeter-wave massive MIMO/FSO in UAV with RIS (Reconfigurable Intelligence Surface) networks is investigated to improve the system spectral efficiency. Firstly, the high-dimensional channels of the RIS-assisted millimeter-wave massive MIMO/FSO in UAV are represented as the low-dimensional channels by Tensor-train decomposition. Secondly, the FSO PE caused by UAV jitter can be effectively solved by BIGRU (Bidirectional Gated Recurrent Unit)-attention neural network model. The fast-fading channels and Doppler shifts are estimated by the FCTPM (Fast Circulant Tensor Power Method) based on the Tensor-train decomposition. Finally, the RIS phase shift matrix is optimized by the SVD (Singular Value Decomposition). The Hybrid beamforming and RIS phase shift matrix are esti-mated by the low-complexity PE-AltMin (Phase Extraction Alternating Minimization) method to solve the beam misalignment. Simulation experiments demonstrate that the proposed method has higher spectrum utilization than other methods.

This study investigates the applications of reconfigurable intelligent surfaces (RIS) in heterogeneous downlink networks (HetNet). Due to the network densification, the small cell base station (SBS) interferes with the macrocell users (MUE). In this paper, we utilize RIS to mitigate cross-tier interference in an HetNet via directional beamforming by adjusting the phase shift of the RIS. We consider an RIS-assisted HetNet consisting of multiple SBS nodes and MUEs that utilize both direct paths and reflected paths. Therefore, the aim of this study is to maximize the sum rate of all MUEs by jointly optimizing the transmit beamforming of the macrocell base station (MBS) and the phase shift of the RIS. An efficient RIS reflecting coefficients-based optimization (RCO) is proposed based on a successive convex approximation approach. Simulation results are provided to show the effectiveness of the proposed scheme in terms of its sum rate in comparison with the scheme HetNet without RIS and the scheme HetNet with RIS but with random phase shifts.

The advances mobile communications has seen in recent years has rendered the radio spectrum a limited and, hence, an expensive resource. Therefore, technologies that support unlicensed access to spectrum are needed. Therefore, the adoption of novel modulation schemes becomes of utmost importance to obtain better spectral-localization and reduce the OOBE (\textit{Out of Band Emission}) inherent to OFDM (\textit{Orthogonal Frequency Division Multiplexing}) and, consequently, mitigating the interference between secondary (\textit{unlicensed}) and primary users. In this scenario, we assess the gain in the bit error probability using f-OFDM (\textit{filtered-OFDM}) in MIMO systems, both used in the 5G RANGE project.

We propose a deep-learning approach for the joint MIMO detection and channel decoding problem. Conventional MIMO receivers adopt a model-based approach for MIMO detection and channel decoding in linear or iterative manners. However, due to the complex MIMO signal model, the optimal solution to the joint MIMO detection and channel decoding problem (i.e., the maximum likelihood decoding of the transmitted codewords from the received MIMO signals) is computationally infeasible. As a practical measure, the current model-based MIMO receivers all use suboptimal MIMO decoding methods with affordable computational complexities. This work applies the latest advances in deep learning for the design of MIMO receivers. In particular, we leverage deep neural networks (DNN) with supervised training to solve the joint MIMO detection and channel decoding problem. We show that DNN can be trained to give much better decoding performance than conventional MIMO receivers do. Our simulations show that a DNN implementation consisting of seven hidden layers can outperform conventional model-based linear or iterative receivers. This performance improvement points to a new direction for future MIMO receiver design.

In this paper, some mixed type bounds on the spectral radius $\rho(A\circ B)$ for the Hadamard product of two nonnegative matrices ($A$ and $B$) and the minimum eigenvalue $\tau(C\star D)$ of the Fan product of two $M$-matrices ($C$ and $D$) are researched. These bounds complement some corresponding results on the simple type bounds. In addition, a new lower bound on the minimum eigenvalue of the Fan product of several $M$-matrices is also presented: $$ \tau(A_{1}\star A_{2}\cdots\star A_{m})\geq \min_{1\leq i\leq n}\{\prod^{m}_{k=1}A_{k}(i,i)-\prod^{m}_{k=1}[A_{k}(i,i)^{P_{k}}-\tau(A_{k}^{(P_{k})})]^\frac{1}{P_{k}}\}, $$ where $A_{1},\ldots, A_{k}$ are $n\times n$ $M$-matrices and $P_{1},\ldots, P_{k}>0$ satisfy $\sum^{m}_{k=1}\frac{1}{P_{k}}\geq 1$. Some special cases of the above result and numerical examples show that this new bound improves some existing results.

During blooms, cyanobacteria produce diverse modified peptides. Among these are the microginins, which inhibit zinc-containing metalloproteases. Ten microginins, microginins KR767 (1), KR801(2), KR835 (3), KR785 (4), KR604 (5), KR638 (6), KR781 (7), KR815 (8), FR3 (9), and FR4 (10) were isolated from the extract of a bloom material of Microcystis sp. (IL-405) collected from the Kishon Reservoir, Israel in the fall of 2009. The structures of the pure compounds were elucidated using 1D and 2D NMR techniques and high-resolution mass spectrometry. The absolute configuration of the chiral centers of the amino acids were determined by Marfey’s and advance Marfey’s methods and by comparison of ¹H and ¹³C NMR chemical shifts of the Ahda derivatives with those of known microginins. These microginins differ in sequence and absolute configuration of the chiral centers of the Ahda moieties and by N-methylation of Ahda amine group and extent of chlorination of Ahda terminal methyl group. The compounds were evaluated for inhibition of the zinc metalloprotease aminopeptidase M and exhibited low- to sub-nanomolar IC₅₀ values.

In this paper, we first investigate secure communications for a two-hop interference relay system in the wireless Internet of Things (IoT), where K source-destination pairs communicate in the presence of an eavesdropper. Explicitly, we jointly design source, relay and destination matrices upon minimizing total mean-squared error (MSE) of all legitimate destinations while keeping the MSE at eavesdropper above a certain threshold. We illuminate that the joint design of the source, relay and destination matrices subject to both secrecy and transmit power constraints. More specifically, we proposed an efficient iterative distributed algorithm to simplify the process of the joint design for optimal source, relay and destination matrices. Furthermore, the convergence of the iterative distributed algorithm is described. Additionally, the performances of the proposed algorithm, including both its secrecy rate and MSE, are characterized with the aid of simulation results. We demonstrate that our proposed algorithm outperforms the traditional approach. As a benefit, secure communications can be guaranteed by using the proposed algorithm for the multiple input multiple output (MIMO) interference relay IoT network in the presence of an eavesdropper.

Background: Polycystic ovary syndrome (PCOS) is a common reproductive and endocrinological disease characterized by ovulatory dysfunction, polycystic ovaries, and hyperandrogenism. Adipokines are believed to contribute to developing PCOS and its accompanying metabolic complications such as dyslipidemia, insulin resistance, and cardiovascular diseases. Oncostatin M (OSM), a novel adipokine, plays a role in oogenesis, lipogenesis, and inflammation and may contribute to PCOS pathogenesis and its related metabolic problems. Methods: In this case-control study, the patients were grouped in a 1:1 ratio into either the PCOS (n = 32) or the control group (n = 32). Blood samples were obtained between the 3rd and 5th days of the menstrual cycle. Serum levels of fasting glucose, insulin, C-reactive protein (CRP), low-density lipoprotein, high-density lipoprotein, triglyceride, white blood cell count, thyroid-stimulating hormone, luteinizing hormone, follicle-stimulating hormone, total testosterone, prolactin estradiol, and OSM were analyzed. Results: OSM levels were significantly lower, but CRP levels were substantially higher in the PCOS group than in the control group (p = .002, p = .001, respectively). OSM was inversely correlated with total cholesterol, non-high-density lipoprotein cholesterol, fasting glucose, and the luteinizing hormone/follicle-stimulating hormone ratio (ρ = .329, p = .017; ρ = .386, p = .005; ρ = .440, p = .001; ρ = .316, p = .023, respectively). Conversely, there was no correlation between OSM and total testosterone level (ρ = .220; p = .118). In the context of inflammation and metabolic parameters, OSM was inversely correlated with CRP, Homeostatic Model Assessment for Insulin Resistance score (HOMA-IR), and low-density lipoprotein cholesterol (LDL) (ρ = .353, p = .019; ρ = .275, p = .048; ρ = .470, p < .001, respectively). The performance of Oncostatin M for diagnosing PCOS showed 50% sensitivity, 75% specificity, and 63% accuracy (p = .009) in ROC curve analysis. Conclusions: Plasma OSM levels were considerably lower in patients with PCOS than in the control group, and this was inversely correlated with the hormonal and metabolic parameters of PCOS. Thus, OSM may be a novel therapeutic target for PCOS and metabolic complications.

The predominance of traffic lights in urban settings often induces fluctuations in traffic patterns and energy utilization among vehicles. To counteract the adverse effects of traffic lights on the energy efficiency of electric vehicles (EVs), a Multi-Intersections-Based Eco-Approach and Departure strategy (M-EAD) is proposed. This strategy aims to enhance vehicle energy efficiency, traffic flow, and battery longevity, all while upholding satisfactory driving comfort. The M-EAD strategy unfolds in two distinct stages: the optimization of an eco-friendly green signal window and the refinement of speed trajectories. The initial stage tackles the optimization of traffic light green signal windows, underpinned by the minimization of travel delays via solving the shortest path problem. In the subsequent stage, a receding horizon framework takes center stage, leveraging an iterative dynamic programming algorithm to tackle the speed optimization challenge. The objective here is to curtail energy consumption and reduce battery wear by finding an optimal speed trajectory. Furthermore, the real-world efficacy of this approach is substantiated through on-road vehicle tests, attesting to its viability in actual road scenarios.

Extended-spectrum β-lactamase (ESBL) mediating resistance in Enterobacterales is a global public health issue, especially in low-and middle-income countries (LMICs) such as Cameroon. ESBL-producing Enterobacterales reduce therapeutic options and lead to the use of last resort drugs such as carbapenems even in vulnerable populations like children under five years. This study aims at determining the phenotypic and genotypic characteristics of ESBL-producing Escherichia coli (ESBL-Ec) isolated from children under five years with and without diarrhoea in two health care facilities in Dschang. A cross-sectional study was conducted from 3 February to 19 May 2022 in two hospitals in the city of Dschang, Cameroon. Stool collected were cultured on Eosine Methylen Blue (EMB) medium. Enterosystem 18 R kit was used for bacterial identification. Evaluation of the resistance patterns and detection of ESBL production were performed with, the Kirby Bauer disk diffusion method and CHROMagar® ESBL medium, respectively. The genomic DNA of ESBL-Ec was extracted using the boiling method and subjected to conventional and multiplex PCRs for detection of blaSHV, blaCTX-M and blaTEM genes. Data were entered into ExcelTM 2016. Epi info and R software were used for statistical analyses with a p-value <0.05 considered statistically significant. Out of the 125 children enrolled, 67.2% (84/125) were colonized by E. coli. Among these, 57.14% (48/84) were colonized by ESBL-Ec. ESBL- Ec isolates showed high levels of resistance to amoxicillin-clavulanic acid (96.22%), cefotaxime (75.47%), ceftriaxone (73.58%), ofloxacin (67.92%), levofloxacin (56.6%) and ciprofloxacin (54.71%). Children aged between 1-3 years (47.62%, p=0.09) and those who had taken an antibiotic one week prior to collection (70.83%, p=0.04) had a higher prevalence of ESBL-Ec with statistical significance. The majority of ESBL-Ec isolates (52.83%; 28/53) were co-producers of blaCTX-M and blaTEM. Infection prevention and control measures coupled with antimicrobial stewardship strategies need to be strengthened to reduce emergence and dissemination of ESBL-Ec among this vulnerable population.

The misuse of antibiotics during the last decades led to the emergence of multidrug resistant pathogenic bacteria. This phenomenon constitutes a major public health issue. Consequently, the discovery of new antibacterials in the short term is crucial. Colicins, due to their antibacterial properties, thus constitute good candidates. These toxin proteins, produced by E. coli to kill enteric relative competitors, exhibit cytotoxicity through ionophoric activity or essential macromolecule degradation. Among the 25-colicin types known to date, colicin M (ColM) is the only one colicin interfering with peptidoglycan biosynthesis. Accordingly, ColM develops its lethal activity in E. coli periplasm by hydrolyzing the last peptidoglycan precursor, lipid II, into two dead-end products, thereby leading to cell lysis. Since the discovery of its unusual mode of action, several ColM orthologs have also been identified based on sequence alignments; all of the characterized ColM-like proteins display the same enzymatic activity of lipid II degradation and narrow antibacterial spectra. This publication aims at being an exhaustive review about what is currently known on this new family of antibacterial enzymes as well as on their potential use of food preservatives or therapeutic agents.

Cyclin dependent kinase 1 (CDK1) has been primarily identified as a key cell cycle regulator in both mitosis and meiosis. Recently, an extramitotic function of CDK1 emerged when evidence was found that CDK1 is involved in many cellular events that are essential for cell proliferation and survival. In this review we summarize the involvement of active CDK1 in the initiation and elongation steps of protein synthesis in eukaryotes. During its activation CDK1 influences the initiation of protein synthesis, promotes the activity of specific translational initiation factors and affects the functioning of a subset of elongation factors. Our review provides insights into gene expression regulation during the transcriptionally silent cell cycle/M-phase and describes quantitative and qualitative translational changes based on the extramitotic role of the cell cycle master regulator CDK1, to optimize temporal synthesis of proteins to sustain division-related processes: mitosis and cytokinesis.

M-polynomial of different molecular structures helps to calculate many topological indices. A topological index of graph G is a numerical parameter related to G which characterizes its molecular topology and is usually graph invariant. In the field of quantitative structure-activity (QSAR) quantitative structure-activity structure-property (QSPR) research, theoretical properties of the chemical compounds and their molecular topological indices such as the Zagreb indices, Randic index, Symmetric division index, Harmonic index, Inverse sum index, Augmented Zagreb index, multiple Zagreb indices etc. are correlated. In this report, we compute closed forms of M-polynomial, first Zagreb polynomial and second Zagreb polynomial of Octagonal network. From the M-polynomial we recover some degree-based topological indices for Octagonal network. Moreover, we give a graphical representation of our results.

Recent discovery of triangular boron Nanotubes makes it a competitor of carbon in many respects. Closed forms of M-polynomial of nanotubes produce closed forms of many degree-based topological indices which are numerical parameters of the structure and, in combination, determine properties of the concerned nanotubes. In this report, we give M-polynomials of triangular boron nanotubes and recover many important topological degree-based indices of these nanotubes. We also plot surfaces associated to these nanotubes.

The goal of this paper is the performance evaluation of a deep learning approach when deployed in fifth-generation (5G) millimeter wave (mmWave) multicellular networks. To this end, the optimum beamforming configuration is defined by two neural networks (NNs) that are properly trained, according to mean square error (MSE) minimization. The first network has as input the requested spectral efficiency (SE) per active sector, while the second network the corresponding energy efficiency (EE). Hence, channel and power variations can now be taken into consideration during adaptive beamforming. The performance of the proposed approach is evaluated with the help of a developed system level simulator via extensive Monte Carlo simulations. According to the presented results, machine learning (ML)-adaptive beamforming can significantly improve EE compared to the standard non-ML framework. Although this improvement comes at the cost of increased blocking probability (BP) and radiating elements (REs) for high data rate services, the corresponding increase ratios are significantly reduced compared to the EE improvement ratio. In particular, considering 21.6 Mbps per active user and ML adaptive beamforming, then EE can reach up to 5.3 Mbps/W, which is significantly improved compared to the non-ML case (0.9 Mbps/W). In this context, BP does not exceed 2.6%, which is slightly worse compared to 1.7% in the standard non-ML case. Moreover, approximately 20% additional REs are required, with respect to the non-ML framework.

Cell-free massive multiple input multiple output (MIMO) has the potential of providing joint services including joint initial access, efficient clustering of access points (APs) and pilot allocation to user equipments (UEs) over large coverage area with reduced interference. In cell-free massive MIMO, large coverage area corresponds to provision and maintenance of scalable quality of service requirements for infinitely large number of UEs. The research in cell free massive MIMO is mostly focused on time division duplex mode due to availability of channel reciprocity which aids in avoiding feedback overhead. However, frequency division duplex (FDD) protocol still dominates the current wireless standards and the provision of angle reciprocity aids in reducing this overhead. The challenge of providing a scalable cell-free massive MIMO system in FDD setting is also prevalent, since computational complexity regarding signal processing tasks such as channel estimation, precoding/combining and power allocation, becomes prohibitively high with increase in number of UEs. In this work, we consider an FDD based scalable cell-free network with angular reciprocity and dynamic cooperation clustering approach. We have proposed scalability for our FDD cell-free and perform comparative analysis with reference to channel estimation, power allocation and precoding/combining techniques. We present expressions for scalable spectral efficiency, angle based precoding/combining schemes and provide comparison of overhead between conventional and scalable angle based estimation as well as combining schemes. Simulations confirm that the proposed scalable cell-free network based on FDD scheme outperforms the conventional matched filtering scheme based on non-scalable precoding/combiming schemes. The angle based LP-MMSE in FDD cell-free network provides 14.3% improvement in spectral efficiency and 11.11% improvement in energy efficiency compared to non-scalable MF scheme.

The Unmanned Aerial Vehicles (UAVs), used in civilian applications such as emergency medical deliveries, precision agriculture, wireless communication provisioning, etc., face the challenge of limited flight time due to their reliance on the on-board battery. Therefore, developing efficient mechanisms for in-situ power transfer to recharge UAV batteries hold potential in extending their mission time. In this paper, we study the use of far-field wireless power transfer (WPT) technique from specialized, transmitter UAVs (tUAVs) carrying Multiple Input Multiple Output (MIMO) antennas for transferring wireless power to receiver UAVs (rUAVs) in a mission. The tUAVs can fly and adjust their distance to the rUAVs to maximize energy transfer. The use of MIMO antennas further boost the energy reception by narrowing the energy beam toward the rUAVs. The complexity of their dynamic operating environment increases with the growing number of tUAVs, and rUAVs with varying levels of energy consumption and residual power. We propose an intelligent trajectory selection algorithm for the tUAVs based on a deep reinforcement learning model called Proximal Policy Optimization (PPO) to optimize the energy transfer gain. Simulation results demonstrate that with the use of PPO, the system achieves a tenfold flight time extension compared to no wireless recharging. Further, PPO outperforms the benchmark movement strategies of ’Traveling Salesman Problem’ and ’Low Battery First’ when used by the tUAVs.

Digital-Radio-Frequency-Memory (DRFM) has emerged as an advanced technique to achieve diverse jamming signals, due to its capability of intercepting waveforms within a short time. Multiple-Input Multiple-Output (MIMO) radars can transmit agile orthogonal waveform sets for different pulses to combat the DRFM-based jamming, where any two groups of waveform sets are also orthogonal. In order to design multiple groups of orthogonal waveform sets at the same time, this article formulates a group orthogonal waveforms optimal design model, whose objec-tive function is the weighted sum of the intra- and inter-group orthogonal performances metrics. To solve this optimization problem, this article proposes a group orthogonal waveforms design algorithm. Based on a primal-dual type method and proper relaxations, the proposed algorithm transforms the original problem into a series of simple sub-problems. Numerical results demonstrate that the proposed algorithm has the ability to balance the intra- and inter-group orthogonal performances by adjusting the weighting factors, which is not available using other state-of-the-art orthogonal waveform design algorithms.

DEXTER (Detection of EXplosives and firearms to counter TERrorism) is a project funded by NATO’s Science for Peace and Security (SPS) program with the goal of developing an integrated system capable of remotely and accurately detecting explosives and firearms in public places without impeding the flow of pedestrians. The active microwave component of the DEXTER project is referred to as MIC (Microwave Imaging Curtain), supported by the French SGDSN (General Secretariat of Defense and National Security), and utilizes a radar system capable of generating 3D images in real time to address non-checkpoint detection of explosives and fire-arms. The project, led by the ONERA (France), is based on a radar imaging system developed by the Fraunhofer FHR institute, using a MIMO architecture with an Ultra Wide-Band waveform. Although high-resolution 3D microwave imaging is already being used in expensive body scanners to detect firearms concealed under clothing, MIC's innovative approach lies in utilizing a high-resolution 3D imaging device that can detect larger dangerous objects carried by moving individuals at a longer range, in addition to providing discrete detection in pedestrian flow. Automatic detection and classification of these dangerous objects is carried out on 3D radar im-ages using a deep-learning network. This paper will outline the project's objectives and constraints, as well as the design, architecture, and performance of the final system. Additionally, it will present real-time imaging results ob-tained during a live demonstration in a relevant environment.

In order to solve the interference of narrowband in the ultra-wideband (UWB) system, a high isolation of multiple-input multiple-output (MIMO) antenna is investigated in this paper. The MIMO antenna consists of 2 or 4 UWB elements; and each UWB antenna element is a monopole reconstructed with 2-notched slots, a U-shaped and inverted U-shaped slots etched on the monopole patch to achieve notch characteristics in WIMAX and ITU bands. The property of a 2-element MIMO antenna is analyzed firstly, which is put into a same substrate in parallel. Two rectangular branches are located in the middle to reduce the coupling. Then a 4-element MIMO antenna is studied to meet big size space and more application scenarios. Each element is placed orthogonally on the same substrate; and the isolation is implemented by a cross-shaped branch located in the middle of elements. Both MIMO antenna samples have been tested to verify the design. Measured results show that the working bandwidth is 2.45-14.88 GHz and 2.14-14.95 GHz, the isolation is greater than 17 dB and 20 dB, the peak gain is 5.7 dB and 5.9 dB, the max-imum radiation efficiency can reach 96% and 95%, the envelope correlation coefficient is less than 0.02 and 0.05 for the 2- and 4-element UWB MIMO antenna, respectively. They both are with very good omnidirectional characteristic with notched bands such as the WIMAX and ITU, and meet the requirements of the UWB application in most cases.

Quantum Gravity is not sufficient to predict the properties of particles (baryonic and non-baryonic) to a great extent. So, we develop General Quantum Gravity (GQG), which is a renormalizable formalization of quantized gravity that emerges from General Relativity through a new scenario of Quantum Mechanics. Inside every observable $(3+1)D$ spacetime in this new scenario of Quantum Mechanics, there must contain an internal hidden $(n+1)D$ spacetime, which immediately yields extra hidden dimensions by a closed continuous mapping, so that the overall spacetime must acquire Supersymmetry. We have also found that Superstrings are inevitably natural and universal but hidden inside every $(3+1)D$ observable spacetime. Superstrings are found eleven-dimensional (rather than lower dimensional) within this quantum spacetime. Consequently, eleven-dimensional Supergravity is necessarily a natural phenomenon within the GQG spacetime. GQG is formalized here in two different aspects. The first one gives an Einstein field equation in a semi-quantum Minkowski spacetime with semi-quantum Lorentzian metric tensor, whereas, the second one yields a purely Quantum Mechanical Einstein field equation in a quantum non-Minkowski spacetime with non-Lorentzian metric tensor. Dark Energy (as well as Dark Matter) appears from GQG quite naturally. We develop here Gravitational Electroweak Dark Energy interactions, where gravity and Dark Energy are allowed to combine with electroweak symmetry. Likewise, in Gravitational Chromodynamic Dark Energy interactions, we combine QCD with gravitational and Dark Energy symmetries. In a Dark Matter gauge symmetry model, we combine Dark matter with all possible gauge symmetries. A Universal Model $SU(7)_{UM}$ combines entire baryonic and non-baryonic particle interactions all together.

ntroduction: Respiratory tract Infections are the greatest cause of death worldwide. Since its outbreak in 2019, the coronavirus pandemic (COVID-19) has been a challenge to humans in terms of treatment and prevention of this respiratory viral infection. The re-emergence of respiratory viral infections like influenza, pose a serious hazard to global public health because they occur seasonally. Creating broad-spectrum antiviral compounds for rapid action in the case of an outbreak crisis, as well as bioweapon defences, is critical. Human galectin-3 is found in high concentrations in activated T lymphocytes, epithelial and endothelial cells, and fibroblasts. ProLectin -I and ProLectin -M are both galectin antagonists. Blocking viral entry with a complex polysaccharide component "ProLectin-M" has downstream effects on viral reproduction enabling it to be used as a therapeutic tool and a safe alternative to conventional anti-viral medicines. Methods: In total, 3 cell based assays have been conducted to evaluate antiviral efficacy of ProLectin–I and ProLectin-M against SARS-CoV-2 virus, Influenza-A (H1N1), and human respiratory syncytial virus (hRSV) strain A2. ProLectin-M and ProLectin-I were evaluated for their anti-viral potency using SARS-CoV2 virus strain by viral RNA Extraction and qRT-PCR assays. The plaque assays were carried out to determine the antiviral activity of the test products (ProLectin-I and ProLectin-M) against ‘Influenza-A (H1N1)-A/PR/8/34 (TC adapted)’ and ‘Human respiratory syncytial virus (hRSV) strain A2’ in a cell based in vitro setting. As eference standard, "Oseltamivir Phosphate" and "Remdesivir" were used to determine antiviral activity of test products against H1N1 and hRSV strains respectively.Results: The IC_{50 of} ProLectin-M and ProLectin-I against SARS-CoV-2 virus was found to be 6248 ng/ml (6.2µg/ml) and 4207 ng/ml (4.2μg/ml) respectively. The CC₅₀ value was similar in both the test products i.e. >100 µg/ml. Against Influenza A (H1N1) strain, ProLectin-M exhibited 95 % reduction in the viral load at the test concentration of 21.8 µg/mL with an IC₅₀ value of 5.4 µg/mL whereas, ProLectin-I did not show any cytotoxicity till 250 µg/mL concentration. Against 'human respiratory syncytial virus (hRSV) strain A2, ProLectin-M exhibited 65 % reduction in the viral load at the test concentration of 43.75 µg/mL with an IC₅₀ value of 27.41 µg/mL whereas, ProLectin- I did not show any cytotoxicity till 250 µg/mL concentration. Conclusion: Both ProLectin-I and ProLectin-M have been reported to exhibit broad-spectrum antiviral activity in ‘in-vitro’ setting. ProLectin-M reducing influenza-A virus by 95% and hRSC strain A2 by 65%. To better understand broad spectrum antiviral activity of ProLectin-I and ProLectin-M, further pre-clinical research is warranted.

ESBL-producing E. coli is a growing public problem in healthcare settings and the community. Between 2009 and 2018, a total of 187 ESBL-producing pathogenic E. coli isolates were confirmed, and clonal complex (CC) 10 was the predominant clone. This study aimed to characterize ESBL-producing pathogenic E. coli CC10 strains obtained from diarrheal patients to improve the understanding of CC10 distribution in the Republic of Korea. A total of 57 CC10 strains were selected for molecular characterizations, such as the identification of serotype, antibiotic resistance genes, genetic environments, plasmid profiles, and the genetic correlation between CC10 strains. In the CC10 isolates, the most prevalent serotype was O25:H16, followed by O6:H16. ESBL genes were identified as blaCTX-M, and the most dominant ESBL gene was blaCTX-M-15 (56%) and blaCTX-M-14 (30%). Most blaCTX-M genes were located on plasmids, and these plasmid profiles were confirmed as IncB/O/K/Z, IncF, IncI1 and IncX1. The mobile elements located up-and down-stream mainly included ISEcp1 (complete or incomplete) and IS903 or orf477 were found, respectively. Phylogenetic analysis showed that the CC10 strains were genetically diverse and divided into several distinct lineages. In this study, we found that CC10 ESBL-producing pathogenic E. coli has been steadily isolated; particularly, CTX-M-15-producing E. coli O25:H16 isolates were the major type related with distribution in CC10 clones during the last decade. Identification of ESBL-producing pathogenic E. coli CC10 isolates highlights the possibility of the emergence of resistant isolates with epidemic potential within this CC. Therefore, continuous monitoring will be conducted to prevent further spread of resistant ESBL-producing E. coli CC10 strains.

A convenient and fast multiresidue method for the efficient identification and quantification of 72 pesticides belonging to different chemical classes in red and white grape wines have been developed. The analysis was based on gas chromatography tandem quadrupole mass spectrometric determination (GC–MS/MS). An optimization strategy involved the selection of MWCNTs amount and cleanup procedure cycle times for m-PFC was performed to achieve ideal recoveries and reduce sample matrix compounds in the final extracts. The optimized procedure obtained consistent recoveries between 70.2 and 108.8% (70.2% and 108.8% for white wine, 72.3% and 106.0% for red wine) , with relative standard deviations (RSDs) generally lower than 8.3% at three spiking levels of 0.01, 0.05 and 0.2 mg/kg. Linearity was studied in the range between 0.005 and 0.2 mg/kg using pesticide standards prepared both in pure solvent and in the presence of matrix, showing coefficients of determination (R²) higher than 0.985 for all the pesticides. To improve accuracy, matrix matched calibration curves were used for calculating the quantification results. Finally, the method was used successfully in detecting pesticide residues in commercial gape wines.

In 2007, the excavation of the M-30 ring road located in Madrid and the creation of a green corridor either side of the Manzanares river brought significant change to the metropolitan area. The corridor and linear park which it provided were designed to contribute to the regeneration of the fluvial ecosystem, establish links among residents on each side of the river and promote cultural and leisure activities. This paper provides a sustainability analysis of the excavation of the M-30 (involving the socio-economic and environmental impact) 14 years after its construction. In order to show such an impact, an analysis of the area both prior to the project and after completion, as well as a hypothetical solution that uses improved materials, has been performed. This entails use of the multi-criteria decision-making model named MIVES (initials in Spanish, modelo integrado de valor para una evaluación sostenible). The MIVES method is based on the application of value functions of sustainability indicators selected by socio-economic and environmental criteria, chosen by experts. Results from analysis showed that the excavation of the M-30 considerably improved the sustainability of the area (sustainable index 3.43 and 6.26 both before and after the excavation works). However, use of improved materials in contrast with the application of conventional materials slightly improved the sustainability of the work (Sustainability Index 6.26 and 6.74, respectively, of the conventional materials).

A variant of the von Neumann-Wigner Interpretation is proposed. It does not make use of the familiar language of wave functionsand observers. Instead it pictures the state of the physical world as a vector in a Fock space and, therefore not, literally, a functionof any spacetime coordinates. And, rather than segregating consciousness into individual points of view (each carrying with it asense of its proper time), this model proposes only unitary states of consciousness, Q(t), where t represents a fiducial time withrespect to which both the state of the physical world and the state of consciousness evolve. States in our world's Fock space areclassified as either 'admissible' (meaning they correspond to definite states of consciousness) or 'inadmissible' (meaning they donot). The evolution of the state vector of the world is such as to always keep it restricted to 'admissible' states. Consciousness istreated very much like what Chalmers calls an "M-Property." But we try to show that problems with the quantum Zeno effect do not arise from this model.

In this paper we investigate in different scenarios the feasibility of using massive multiple-input multiple-output (mMIMO) with Reconfigurable Intelligent Surfaces (RISs) to boost the throughput and coverage performances with high energy efficiency, considering sub-6 GHz, mmWave and THz bands. With that objective, a centralized radio access network (C-RAN) suitable for beyond fifth generation (B5G) systems is considered, where we integrate the base stations (BSs) with multiple RISs and devices or user equipment. RISs with a large number of quasi-passive reflecting elements constitute a low-cost approach capable of shaping the radio wave propagation and improve wireless connectivity. We consider a scenario where multiple RISs are combined with mMIMO in the uplink in order to provide connectivity to Smart City (thousands of active low power devices) wirelessly, in the 3.6GHz and 28GHz bands. We also address a scenario where RISs are adopted with mMIMO in the downlink so as to offer connectivity to a Stadium with Pitch, (thousands of active user equipment) in the 28GHz band. Finally, we have also studied the connectivity at 100GHz of a Factory where several RIS panels replacing most of the BSs equipped with mMIMO assure improved throughput and coverage. We concluded that RISs are capable of improving the performance in any of these analyzed scenarios at the different frequency bands, justifying that they are a key enabling technology for 6G.

In recent years, since the propagation channel characteristics have been effectively used for applications such as motion sensing, position detection, etc. A great deal of attention is attracted to channel sounding methods easy to utilize using low-cost devices. This paper presents a device-free indoor location estimation method using spatio-temporal features of radio propagation channels using the 2.4-GHz band 3-by-3 MIMO channel sounder developed using commodity wireless LANs. The measurement results demonstrated a reasonable performance of the proposed method with small number of antennas.

The unprecedented demand for services and applications, coupled with large network architecture calls for a radical melioration in evolving wireless networks. Massive multiple-input and multiple-out (massive MIMO) systems, small cell networks (SCN) and Heterogeneous networks (HetNet) are envisioned to meet the new quality of service (QoS) objectives of evolving networks. In this paper, we investigate massive MIMO with HetNet, where the intended macro BS signal follows Ricean fading and interfering Femto BS signals follow Rayleigh fading. Subject to the Ricean assumption, strong line-of-sight (LOS) channel exists in the coverage area, when the high power macro BS is mounted at a high altitude. Then, by exploiting matrix and stochastic geometric tools, we evaluate the signal-to-interference (SIR). And obtain QOS objectives: coverage and outage probabilities, and area spectral efficiency (ASE). Further, we investigate the role of multiple antenna system in improving the SIR. This involves massive MIMO beamforming coordination of the macro BSs through power control with max-min optimization for users at the cell-edge. Numerical results show that the coverage and outage performance converge for different user locations, pathloss and Ricean factor. Also, the monotonic increase in Ricean factor improves the SIR of a user located within coverage region. That is, a user is in an outage at a distance where the Ricean factor is very small. And, optimal macro BS antennas and Ricean factor that achieve the ASE performance guarantee a rate-fairness between the cooperating macrocells, and avoid strong Ricean channel correlation. The performance gain is dependent on Ricean factor and user location, but independent of cell size.

Positive recurrence for a single-server queueing system is established under generalised intensity conditions of service which does not assume existence of the density distribution function of service but a certain integral type lower bound as a sufficient condition. Positive recurrence implies existence of the invariant distribution and a guaranteed slow convergence to it in the total variation metric.

A new set of basis functions is presented. The foundation in mathematics is established. To reconstruct a signal, it is compared to the Fourier basis functions. The M-basis functions' potential applications are also presented.

The increase in the number of firms manipulating financial reports has misled shareholders' investment decisions and resulted in an indelible blot on foreign investors’ trust. Due to earnings management (EM) practice, managers' inefficiency, and lack of transparency in Iraq companies. This study tested the influence of the corporate governance mechanisms (CG), (board independence, audit committee, meeting frequency) on EM based on agency theory, as well, to link between EM and firm's performance (FP) in Iraqi listed companies and the impact of moderating role of corporate social responsibility (CSR) based on the Stakeholder Theory. The study's sample consists of 65 companies for the 2013-2018 financial years. Data were collected mainly from the annual reports (secondary data) of the Iraqi listed firms. This study uses the M-score model to detect EM practices as practical techniques in detecting earnings manipulation practices. The panel static model estimators. Hence, this paper adds to the CG literature from the perspective of stakeholder theory using Iraq's unique industrial environment. Based on the research results, policy-makers might use the study‘s findings to recognize the essential roles of several CG mechanisms in alleviating the opportunistic practices in Iraq. Further, companies should also be encouraged to enhance the CSR disclosure quality.

Epilepsy is characterized by repeated spontaneous reactions caused by hyper-excitability and neurons firing in high synchronization in the central nervous system. It seriously affects the quality of life of epileptic patients and nearly 30% of individuals are refractory to treatment of antiepileptic drugs. Therefore, there is an urgent need to develop new medicines to manage and control the refractory epilepsy. Cannabinoid ligands including selective cannabinoid receptor subtype (CB1 or CB2 receptor) ligands and non-selective cannabinoid (synthetic and endogenous) ligands may serve as the novel candidates for this need. Cannabinoid systems appear to regulating seizure activity in the brain through the activation of CB1 and CB2 cannabinoid receptors (CB1R and CB2R). An abundant series of cannabinoid analogues have been tested in various animal models, including a rat pilocarpine model of acquired epilepsy, in vitro hippocampal neuronal culture models of acquired epilepsy and status epilepticus, a pentylenetetrazole model of myoclonic seizures in mice and a penicillin-induced model of epileptiform activity in the rats. The accumulating lines of evidence show that cannabinoid ligands exhibit significant benefits to control seizure activity in different epileptic models. For this reason, we summarize the relationship between brain CB2 receptors and seizures, and emphasize the potential mechanisms of their therapeutic effects involving affecting neurons, astrocytes, and microglia cells. The unique features of CB2Rs, such as lower expression levels under physiological conditions and high inducibility under epileptic conditions, make it an important target for future research on drug-resistant epilepsy.

Rifampicin is one of the most important chemotherapeutic agents used in the treatment of tuberculosis. M. tuberculosis clinical strains resistant to rifampicin harbor mainly mutation in an 81-base pair region of rpoB. These mutations mainly consist of single amino acid substitutions. However insertions also can be related with rifampicin resistance strains. Herein, we described an insertion of 12 nucleotides in clinical isolates of M. tuberculosis resistant to rifampicin, all obtained from inmates. To evaluate the importance this insertion in surviving and drug resistance, it were carried out fitness experimental assays as well as in silico studies of 3D structural models, molecular docking simulations and virtual screening. The medical records of the seven patients showed all were previously treated to tuberculosis. Growth curves shown that the insertion determines a biological cost when compared to wild type rpoB and katG; or the double mutated rpoB S531L and katG S315T. From docking and molecular dynamics simulations it can be inferred that the insertion does not affect the process of synthesis of RNA transcripts. On the other hand, in the mutant RNAP-RIF complex rifampicin confirmed a low affinity interaction for the mutant form. Interesting, virtual screening for potential inhibitors for wtRNAP and mRNAP using a library of 1446 compounds approved by the FDA showed that the best ligands were mainly compounds with antibiotic activity, although the targets involved in the pharmacological action are other than RNAP. In conclusion, seven strains of M. tuberculosis RIF resistant that present an insertion of four amino acids in RNA polymerase showed by growth curve assays, a biological cost. Further, bioinformatics tools had characterized the putative drug resistance dynamic as well as the maintenance of RNA polymerase activity.

In order to solve the interference of narrowband communication system to ultra-wideband (UWB) system and meet the design requirements of high isolation of multiple-input multiple-output (MIMO) antenna, two MIMO antennas with double notch structures are designed. Firstly, a two-element antenna was placed symmetrically in parallel, and two rectangular branches were loaded to improve the isolation. U-shaped slots and inverted U-shaped slots are etched on the radiating patch and feeder to achieve notch characteristics in WIMAX and ITU band, respectively. Then, in order to meet more application scenarios, a four-element MIMO antenna is designed, where each element is placed orthogonally to each other, and the isolation is improved by loading a cross-shaped branches in the middle of elements. Both antenna samples are tested to verify the design. Measured results show that the working bandwidth of the two-element UWB MIMO antenna is 2.45-14.88 GHz, the isolation is greater than 17 dB, the peak gain is 5.7 dB, the maximum radiation efficiency can reach 96%, the envelope correlation coefficient (ECC)is less than 0.02. Meanwhile, the working bandwidth of the four-element antenna is 2.14-14.95 GHz, the isolation is greater than 20 dB, the peak gain is 5.9 dB, the maximum radiation efficiency can reach 95%, the ECC is lower than 0.05. They both are with very good omnidirectional characteristic, and meet the requirements of the UWB application.

Wireless communications are gaining massive demand for faster video streaming, virtual reality, and 5G-based IoT (Internet of Things) applications. Due to this network congestion increases hastily. The demand for user-specific services, machine learning, forcing the radio access network (RAN) to provide improvement in utilization of spectrum efficiency, minimizing power consumption, and improving data rate. For LTE/LTE-A network specifications provided by third-generation partnership project (3GPP), guarantees to provide qualitative of service (QoS). Release 15/16 utilizes two-dimensional (2D) active antenna array systems (AAS). This kind of AAS provides beam forming in both azimuth and elevation also termed as Full Dimensional MIMO (FD-MIMO). It enhances the radiation pattern of the antenna array element by adjusting the angular power spectra at the base station (BS), it also allows selecting the minimum number of antennas for effective beam forming toward specific user equipment’s (UEs). Spectrum allocation challenge can be dealt with at mm wave band having FR2 (>6GHz) frequency band specified by International Telecommunication Union (ITU-R) in line with IMT-2020 specifications. The spectrum is free at mm Wave for communication of 5G. However, the main challenge is, it faces path loss and atmospheric loss electromagnetic energy absorbed by gases like oxygen. In this work, the 5G new RAN power spectrum and power delay profile at 10GHz carrier frequency with 20MHz to 100MHz channel bandwidth is observed for line of sight (LOS) and non-line of sight (NLOS) communication for guaranteed QoS. To demonstrate the path loss and power delay profile (PDP) in directional and Omni-directional antennas NYUSIM channel simulator is utilized.

Large intelligent surfaces (LIS) promises not only to improve the signal to noise ratio, and spectral efficiency but also to reduce the energy consumption during the transmission. We consider a base station equipped with an antenna array using the maximum ratio transmission (MRT), and a large reflector array sending signals to a single user. Each subchannel is affected by the Rayleigh flat fading, and the reflecting elements perform non-perfect phase correction which introduces a Von Mises distributed phase error. Based on the central limit theorem (CLT), we conclude that the overall channel has an equivalent Gamma fading whose parameters are derived from the moments of the channel fading between the antenna array and LIS, and also from the LIS to the single user. Assuming that the equivalent channel can be modeled as a Gamma distribution, we propose very accurate closed-form expressions for the bit error probability and a very tight upper bound. For the case where the LIS is not able to perform perfect phase cancellation, that is, under phase errors, it is possible to analyze the system performance considering the analytical approximations and the simulated results obtained using the well known Monte Carlo method. The analytical expressions for the parameters of the Gamma distribution are very difficult to be obtained due to the complexity of the nonlinear transformations of random variables with non-zero mean and correlated terms. Even with perfect phase cancellation, all the fading coefficients are complex due to the link between the user and the base station that is not neglected in this paper.

Today electricity is distributed to the individual users via physical Copper connections. From the power stations, the energy is transported through transmission lines where the electricity, sinusoidally modulated at a fixed frequency of about 50 Hz, is raised up to a voltage in a range approximately variating between 30, and 110 kV. When electrons, aligned at this voltage, pass through the transmission lines, they cause coherent vibrations, sometimes even audible in the acoustic frequencies. In the spectrum of movements to which electric cables are subjected, there are also unexpected and sporadic movements caused by winds and rain. The problem of carrying out persistent, precise and spatially distributed monitoring of transmission line health is to use a large number of sensors physically distributed everywhere and somehow transmit the results to a control station. The use of synthetic aperture radar (SAR) data could be a viable solution of persistent and wide-area high-voltage vibration monitoring. In this paper we produce a comprehensive survey on how to monitor both movements in terms of vibrational displacement, due to weathering, and those due to electricity transmission, normally fixed at about 50 Hz. The results demonstrate the technical feasibility of an operational use of SAR for these purposes in the very short term. This would allow the possibility of monitoring malfunctions such as black-outs or other frequency anomalies.

A substantial spike in the need for quality healthcare has resulted from people being more cognizant of health issues. With blockchain, healthcare providers may safely share patient information electronically, which is especially important given the sensitive nature of the data contained inside them. However, flaws in the current blockchain design have surfaced since the dawn of quantum computing systems. The study proposes a novel quantum inspired blockchain system (Qchain) and constructs a unique entangled quantum medical record (EQMR)system with an emphasis on privacy and security. This Qchain relies on entangled states to connect its blocks. Automated production of the chronology indicator reduces storage capacity requirements by connecting entangled BloQ (blocks with quantum properties) with controlled activities. One qubit is used to store the hash value of each block. A lot of information regarding quantum internet is included in the protocol for the entangled quantum medical record (EQMR). EQMR can be accessed in Medical Internet of Things (M-IoT) systems may be kept private and secure, and their where-abouts can be monitored in the event of an emergency. The protocol also uses quantum authentication in place of more conventional methods like encryption and digital signatures. Mathematical research shows that the quantum converged blockchain (QCB) is highly safe against attacks such as the External attack, Intercept-Measure-Repeat attack, and Entanglement-Measure attack. The reliability and auditability evaluations of the entangled BloQ, as well as the quantum circuit design for computing the hash value, are presented. There's also a comparison between the suggested approach and several other quantum blockchain designs.

Background: Polycystic ovary syndrome is a common reproductive and endocrinological disease characterized by ovulatory dysfunction, polycystic ovaries, and hyperandrogenism. Adipokines are believed to contribute to developing polycystic ovary syndrome and its accompanying metabolic complications such as dyslipidemia, insulin resistance, and cardiovascular diseases. Oncostatin M, a novel adipokine, plays a role in oogenesis, lipogenesis, and inflammation and may contribute to polycystic ovary syndrome pathogenesis and its related metabolic problems. Methods: In this case-control study, the patients were grouped in a 1:1 ratio into either the polycystic ovary syndrome (n = 32) or the control group (n = 32). Blood samples were obtained between the third and fifth days of the menstrual cycle. Serum levels of fasting glucose, insulin, C-reactive protein, low-density lipoprotein cholesterol, high-density lipoprotein cholesterol, triglyceride, white blood cell count, thyroid-stimulating hormone, luteinizing hormone, follicle-stimulating hormone, total testosterone, prolactin, estradiol, homeostasis model assessment of insulin resistance and oncostatin M were analyzed. Results: Oncostatin M levels were significantly lower, but C-reactive protein levels were substantially higher in the polycystic ovary syndrome group than in the control group (p = 0.002, p = 0.001, respectively). Oncostatin M was inversely correlated with total cholesterol, non-high-density lipoprotein cholesterol, fasting glucose, and the luteinizing hormone/follicle-stimulating hormone ratio (ρ = -0.329, p =0 .017; ρ = -0.386, p = 0.005; ρ = -0.440, p = 0.001; ρ = -0.316, p = 0.023, respectively). Conversely, there was no correlation between oncostatin M and total testosterone level (ρ = 0.220; p = 0.118). In the context of inflammation and metabolic parameters, oncostatin M was inversely correlated with C-reactive protein, homeostatic model assessment for insulin resistance score, and low-density lipoprotein cholesterol (ρ = -0.353, p = 0.019; ρ = -0.275, p = 0.048; ρ = -0.470, p &lt; 0.001, respectively). The diagnostic performance of oncostatin M, C-reactive protein, homeostasis model assessment of insulin resistance, and non-high-density lipoprotein cholesterol for polycystic ovary syndrome is as follows: Oncostatin M, sensitivity: 50%, specificity: 75%, Accuracy: 63%, p = 0.009; C-reactive protein, sensitivity: 84%, specificity: 61%, Accuracy: 74%, p = 0.004; homeostasis model assessment of insulin resistance, sensitivity: 72%, specificity: 81%, Accuracy: 77%, p &lt; 0.001; and non-high-density lipoprotein cholesterol; sensitivity: 72%, specificity: 75%, accuracy: 73%, p &lt; 0.001. Conclusions: Plasma oncostatin M levels were considerably lower in patients with polycystic ovary syndrome than in the control group, and this was inversely correlated with the hormonal and metabolic parameters of polycystic ovary syndrome. Thus, oncostatin M may be a novel therapeutic target for polycystic ovary syndrome and its metabolic complications.

A major route for influx of calcium ions into neurons uses the STIM-Orai1 voltage-independent channel. Once cytosolic calcium ([Ca2+]i) elevates, it activates mitochondrial and endoplasmic calcium stores, to affect downstream molecular pathways. In the present study we employed a novel drug, Carbonyl Cyanide Chlorophenylhydrazone (CCCP), a mitochondrial uncoupler, to explore the role of mitochondria in cultured neuronal morphology. CCCP caused a sustained elevation of [Ca2+]i and, quite surprisingly, a massive increase in density of dendritic filopodia and spines in the affected neurons. This morphological change can be prevented in cultures ex-posed to calcium-free medium, to Orai1 antagonist 2APB, or to cells transfected with domi-nant-negative Orai1 plasmid. It is suggested that CCCP activates mitochondria through influx of calcium, to cause a rapid growth of dendritic processes

Using a simple model for internal heat evolution and mass-internal heat relations found for rocky exo planetary objects in the inner solar system we have inferred the phases of volcanism at earth ( EA) or host star ages (SA) in 52 potentially habitable rocky exo planets. We have also calculated the internal tidal heat contributions and magnetic moments of these exo planets. Based on these results we have inferred the probability of existence of life favouring geophysical conditions in the above exo planets at EA and SA. In M star associated exo planets, occurrences of super flares and long night periods may pose problems for the development of advanced life

A novel type of phosphazene containing additive that act both as catalyst and as flame retardant for benzoxazine binders is presented in this study. The synthesis of a derivative of hexachlorocyclotriphosphazene (HCP) and meta-toluidine was carried out in the medium of the latter, which made it possible to achieve complete substitution of chlorine atoms in the initial HCP. Thermal and flammability characteristics of modified compositions are revealed. The modifier catalyzes the process of curing and shifts the beginning of reaction from 222.0 C for pure benzoxazine to 205.9 C for composition with 10 phr of modifier. The additive decreases the glass transition temperature of compositions. Achievement of the highest category of flame resistance (V-0 in accordance with UL-94) is ensured both by increasing the content of phenyl residues in the composition and by the synergistic effect of phosphorus and nitrogen. Brief research of the curing kinetics disclosed the complex nature of the reaction. An accurate two-step model is obtained using extended Prout-Tompkins equation for both steps.

Land Surface Temperature (LST) is a basic parameter in energy exchange between the land and atmosphere and is frequently used in many sciences such as climatology, hydrology, agriculture, ecology, etc. LST time series data have usually deficient, missing and unacceptable data caused by the presence of clouds in images, presence of dust in atmosphere and sensor failure. In this study, Singular Spectrum Analysis (SSA) algorithm was used to resolve the problem of missing and outlier data caused by cloud cover. The region studied in the present research included an image frame of MODIS with horizontal number 22 and vertical number 05 (h22v05). This image involved a large part of Iran and Turkmenistan and Caspian Sea. In this study, MODIS LST sensor (MOD11A1) was used during 2015 with 1×1 Km spatial resolution and day/night LST data (daily temporal resolution). The results of the data quality showed that cloud cover caused 36.37% of missing data in the studied time series with 730 day/night LST images. Further, the results of SSA algorithm in reconstruction of LST images indicated the Root Mean Square Error (RMSE) of 2.95 K between the original and reconstructed data in LST time series in the study region. In general, the findings showed that SSA algorithm using spatio-temporal interpolation in LST time series can be effectively used to resolve the problem of missing data caused by cloud cover.

Build a special identical equation, use its calculation characters to prove and search for solution of any odd converging to 1 equation through (*3+1)/2^k operation, change the operation to (*3+2^m-1)/2^k, and get a solution for this equation, give a specific example to verify. Thus prove the Collatz Conjecture is true. Furthermore, analysis the sequences produced by iteration calculation during the procedure of searching for solution, build a weight function model, prove it decrease progressively to 0, build a complement weight function model, prove it increase to its convergence state. Build a (*3+2^m-1)/2^k odd tree, prove if odd in (*3+2^m-1)/2^k long huge odd sequence can not converge, the sequence must outstep the boundary of the tree after infinite steps of (*3+2^m-1)/2^k operation.

The ceramic sherds from approximately 20 samples of lead-glazed tableware, recovered from diverse archaeological sites, including three repurposed storage pits transformed into dumpsters within the medieval city of Santarém (13th-14th century), underwent a meticulous examination. This investigation utilized techniques such as micro-Raman, ground state diffuse reflectance absorption, and X-ray fluorescence spectroscopies, in addition to X-ray diffraction and stereomicroscopy. A parallel study was conducted on contemporaneous European ceramics (glazed sherds) sourced from archaeological sites dating back to the 13th-15th centuries in Saintonge (France), Ardenne, Zomergem, and Bruges (Belgium), as well as Surrey-Hampshire, Kingston, and Cheam (England). The colour of the ceramic bodies is predominantly white or whitish, with a few exhibiting a vivid red hue. Ceramic sherds with a light paste composition were likely crafted using kaolin clays as raw materials. Analyses of fabric, mineralogical, and elemental composition of the sherds suggest that the majority of Santarém's glazed ceramics were locally or regionally produced, potentially derived from a Pliocene kaolin-rich sand formation. However, this conclusion is not supported by the absence of discovered lead glaze kilns or workshops in Santarém for the late Middle Ages. A distinctive feature from the European workshop ceramics lies in the quartz temper content and fabric.

This study aimed to determine the correlation of colour M-mode velocity propagation in the assessment of left ventricular diastolic function among acute decompensated heart failure patients with preserved ejection fraction (HFpEF). This research is an observational analytical study using a cross–sectional study design conducted from April to June 2022. The subjects of this study were patients diagnosed with acute HFpEF and treated at Dr. Soetomo General Academic Hospital, Surabaya. Patients with heart rhythm disturbances, moderate to severe valvular heart disease, and congenital heart defects were excluded from this study. Patients were measured for diastolic function including mitral valve early mitral inflow velocity (MV E Velocity), mitral peak velocity of early filling (E’) (E' Septal and E' Lateral), left atrial volume index (LAVI), The maximal tricuspid regurgitation velocity (TR V Max), Vp, the ratio of early diastolic mitral inflow velocity to early diastolic mitral annulus velocity (E/E'), the ratio between early and late ventricular filling velocity (E/A) and E/Vp Ratio. N-terminal-pro hormone B-type natriuretic peptide (NT–ProBNP) examination was also performed on study subjects as an additional diagnosis of acute heart failure. There were 33 patients who met the inclusion and exclusion criteria and were included in our study. There were 26 patients (78.8%) with grade I diastolic dysfunction, 4 patients (12.1%) with grade II diastolic dysfunction, and 3 patients (9.1%) with grade III diastolic dysfunction. There is a strong positive correlation between Vp with parameters E' Septal (p = &lt; 0.001; r = 0.636) and E' Lateral (p = &lt; 0.001; r = 0.650). Vp is negatively correlated with the ratio E/E' (p = 0.029; r = –0.37). The PCWP estimate with E/Vp ratio had a strong correlation with the NT–Pro BNP value &gt; 300 pg/ml in acute HFpEF patients (p = &lt; 0.001; r = 0.726) compared to the PCWP estimate with E/E' (p = &lt; 0.001; r = 0.549). There is no correlation between Vp value and degree of diastolic dysfunction in patients with acute HFpEF.

Partial negative allosteric modulators (NAM) of the mGlu5 receptor are an excellent alternative to full antagonists and NAMs because they retain some therapeutic effects and, at the same time, have a much broader therapeutic window. Here, we investigated whether partial mGlu5 NAM, M-5MPEP induced a fast and sustained antidepressant-like effect, characteristic of rapid-acting antidepressant drugs (RAADs) like ketamine, in C57BL/6J mice. M-5MPEP caused a rapid, dose-dependent antidepressant-like action in the tail suspension test (TST) 60 min after injection. This effect was antagonized by an AMPA receptor antagonist (NBQX) and a TrkB receptor antagonist (ANA-12) but not by 5HT1A and 5HT2A/2C receptor antagonists. Furthermore, M-5MPEP (30 mg/kg) induced sustained antidepressant-like effects 24 h after the last of four administrations. These effects were revealed in the splash test, designed to measure apathy-like state, and in the TST. Western blot and ELISA analyses indicated the involvement of the TrkB/BDNF pathway in the sustained M-5MPEP effects. Additionally, prolonged effects of M-5MPEP were entirely reversed by the TrkB receptor antagonist ANA-12 in both the splash test and the TST, confirming the critical role of TrkB receptor activation in the sustained antidepressant-like effect of M-5MPEP. Importantly, M-5MPEP enhanced the subthreshold dose of (R)-ketamine in the TST, indicating both substances' convergent mechanisms of action and the possibility of their practical use in treating depression.

Oncostatin M (OSM), an inflammatory cytokine belonging to interleukin-6 superfamily, is recognized as an essential factor secreted by osteal macrophages to orchestrate bone remodelling. Osteoprotegerin (OPG) produced by osteoblasts regulates osteoclastogenesis. We previously demonstrated that bone morphogenetic protein-4 (BMP-4) stimulates OPG synthesis in osteoblast-like MC3T3-E1 cells, and that SMAD1/5/8(9), p38 mitogen-activated protein kinase (MAPK), and p70 S6 kinase positively regulates the OPG synthesis. The present study is aimed to investigate the effect of OSM on BMP-4-stimulated OPG synthesis in osteoblasts. OSM suppressed the release and the mRNA expression of OPG upregulated by BMP-4 in MC3T3-E1 cells.  Neither the BMP-4-induced phosphorylation of SMAD1/5/9 nor that of p38 MAPK affected by OSM. On the other hand, the BMP-4-stimulated phosphorylation of p70 S6 kinase was considerably suppressed by OSM. These results strongly suggest that OSM suppresses the BMP-4-stimulated OPG synthesis via inhibition of the p70 S6 kinase-mediated pathway in osteoblasts.

We introduce a special vector field ω on a Riemannian manifold (N^m, g), such that the Lie derivative of the metric g with respect to ω is equal to ρRic, where Ric is the Ricci curvature of (N^m, g) and ρ is a smooth function on N^{m} and call this vector field a ρ-Ricci vector field. We use ρ-Ricci vector field on a Riemannian manifold (N^m, g) and find two characterizations of m-sphere S^m(α). In first result, we show that an m-dimensional compact and connected Riemannian manifold (N^m, g) with nonzero scalar curvature admits a ρ-Ricci vector field ω such that ρ is nonconstant function and the integral of Ric(ω,ω) has a suitable lower bound is necessary and sufficient for (N^m, g) to be isometric to m-sphere S^m(α). In second result, we show that an m-dimensional complete and simply connected Riemannian manifold (N^m, g) of positive scalar curvature admits a ρ-Ricci vector field ω such that ρ is a nontrivial solution of Fischer-Marsden equation and the squared length of the covariant derivative of ω has an appropriate upper bound, if and only if, (N^m, g) to be isometric to m-sphere S^m(α).

The most widely distributed bla_CTX-M gene on a global scale is bla_CTX-M-15. The dissemination has been associated with clonal spread and different types of mobile genetic elements. This study aimed to review and describe the genetic environments of bla_CTX-M-15 gene detected from Enterobacteriaceae in published literature from Africa. A literature search for relevant articles was done through PubMed, and Google Scholars electronic databases, 43 articles from 17 African countries were included in the review based on the eligibility criteria. Insertion sequences were reported as part of the genetic environment of bla_CTX-M-15 gene in 32 studies, integrons in 13 studies, and plasmids in 23 studies. In this review, five insertion sequences including ISEcp1, IS26, orf447, IS903, and IS3 have been detected associated with the genetic environment of bla_CTX-M-15 in Africa. Seven different genetic patterns were seen in bla_CTX-M-15 genetic environment. Insertion sequence ISEcp1 was commonly located upstream of the end of the bla_CTX-M-15 gene while insertion sequence orf477 was located downstream. In some studies, ISEcp1 was truncated upstream of bla_CTX-M-15 by insertion sequences IS26 and IS3. Class 1 integron (Intl1) was most reported to be associated with bla_CTX-M-15 (13 studies), with Intl1/dfrA17–aadA5 being the most common gene cassette array. IncFIA-FIB-FII multi-replicons and IncHI2 replicon types were the most common plasmid replicon types that horizontally transfer bla_CTX-M-15 gene. Aminoglycoside modifying enzymes, and plasmid-mediated quinolone resistance genes were commonly collocated with bla_CTX-M-15 gene on plasmids. This review revealed the predominant role of ISEcp1, Intl1and IncF plasmid in the mobilization and continental dissemination of the bla_CTX-M-15 gene in Africa.

Astronauts are at risk of losing 1.0 to 1.5% of their bone mass for every month they spend in space despite their adherence to high impact exercise training programs and dietary regimens designed to preserve their musculoskeletal system. This loss is the result of microgravity-related impairment of osteocyte and osteoblast function and the consequent upregulation of osteoclast-mediated bone resorption. This review describes the ontogeny of osteoclast hematopoietic stem cells, the contributions of macrophage colony stimulating factor, activator of NFkB and the calcineurin pathways make in osteoclast differentiation, and provides details of bone formation, the osteoclast cytoskeleton, the immune regulation of osteoclasts, and osteoclast mechanotransduction on Earth, in the microgravity of space, and in conditions of simulated microgravity. The article discusses the need to better understand how osteoclasts are able to function in zero gravity and reviews current and prospective therapies that may be used to treat osteoclast-mediated bone disease.

Global financial investments in energy production and consumption are significant since all aspects of a country's economic activity, and development require energy resources. In this paper, we assess the investment trends in the global energy sector during, before and after financial crises of 2008 using two data sources: (1) Dealogic database providing cross‐border mergers and acquisitions (M&As), and (2) fDi Intelligence fDi Markets database providing greenfield (GF) foreign direct investments (FDIs). We highlight the changing role of China and compare its M&A and GF FDI activities to those of the United States, Germany, UK, Japan and others during this period. We analyze the investments along each segment of the energy supply chain of these countries to highlight the geographical origin and destination, sectoral distribution, and cross‐border M&As and GF FDI activities. Our paper shows that while energy accounts for nearly 25% of all GF FDI, it only accounts for 4.82% of total M&A FDI activity in the period 1996-2016. China's outbound FDI in the energy sector started its ascent around the time of the global recession and had accelerated in the post-recession phase. In the energy sector, the development of China's outbound cross‐border M&As is similar to USA or UK, located mostly in the developed countries in the west, while their outbound GF investments are spread across many countries around the world. Also, China's outbound energy M&As are concentrated in certain segments (extraction, and electricity generation) while their GF covers all segments of the energy supply chain.

Graph theory plays a crucial role in modeling and designing of chemical structure or chemical network. Chemical Graph theory helps to understand the molecular structure of molecular graph. The molecular graph consists of atoms as vertices and bonds as edges. Topological indices capture symmetry of molecular structures and give it a mathematical language to predict properties such as boiling points, viscosity, the radius of gyrations etc. In this article, we study the chemical graph of carbon Crystal structure of graphite and cubic carbon and compute several degree-based topological indices. Firstly we compute M-Polynomials of these structures and then from these M-polynomials we recover nine degree-based topological indices.

Acid proteins capable of nucleating Ca2+ and displaying aggregation capacity play key roles in the formation of calcium carbonate biominerals. EF-hands are among the largest Ca2+-binding motif in proteins. Gad m 1, an Atlantic cod β-parvalbumin isoform, is a monomeric EF-hand protein that acts as a Ca2+ buffer in fish muscle and is able to form amyloids under acidic conditions. Since nucleating Ca2+ protein have a propensity to form extended β-strand structures, we wondered whether amyloid assemblies of a protein containing refolded EF-hand motifs were able to influence the in vitro calcium carbonate crystallization. Here we have used the Gad m 1 chain as model to generate monomeric and amyloid assemblies and analyze their effect on in vitro calcite formation. We found that only amyloid assemblies alter calcite morphology.

To solve large scale linear equations involved in the Fast Multipole Boundary Element Method (FM-BEM) efficiently, an iterative method named the generalized minimal residual method (GMRES)(m)algorithm with Variable Restart Parameter (VRP-GMRES(m) algorithm) is proposed. By properly changing a variable restart parameter for the GMRES(m) algorithm, the iteration stagnation problem resulting from improper selection of the parameter is resolved efficiently. Based on the framework of the VRP-GMRES(m) algorithm and the relevant properties of generalized inverse matrix, the projection of the error vector r_m+1 on r_m is deduced. The result proves that the proposed algorithm is not only rapidly convergent but also highly accurate. Numerical experiments further show that the new algorithm can significantly improve the computational efficiency and accuracy. Its superiorities will be much more remarkable when it is used to solve larger scale problems. Therefore, it has extensive prospects in the FM-BEM field and other scientific and engineering computing.

This research aims to estimate the micro-motion (m-m) of ships. The problem of motion and m-m detection of targets is usually solved using synthetic aperture radar (SAR) along-track interferometry (ATI) which is observed employing two radars spatially distanced by a baseline extended in the azimuth direction. This paper is proposing a new approach where the m-m estimation of ships, occupying thousands of pixels, is measured processing the information given by sub-pixel tracking generated during the coregistration process of several re-synthesized time-domain and overlapped sub-apertures. The SAR products are generated splitting the raw data, according to a small-temporal baseline strategy, observed by one single wide-band staring spotlight (ST) SAR image. The predominant vibrational modes of different ships are estimated and results are promising to extend this application in performing surveillance also of land-based industries activities. Experiments are performed processing one ST SAR image observed by the COSMO-SkyMed satellite system.

Gesture recognition technology has been quickly developed in the field of human-computer interaction. The multiple-input multiple-output (MIMO) radar has been widely adopted in gesture recognition because of its notable spatial resolution. In this work, a highly accurate MIMO radar-based hand gesture recognition algorithm with very low complexity is proposed. To make the proposed system applicable in the industry and work well even when the size of the training data is limited, we applied several low-complexity adaptive signal processing methods to extract features and reduce the noise effect. First, spectrum analysis is applied to range-Doppler maps (RDMs) and a cell-averaging constant false alarm rate (CA-CFAR) with mirror filters is applied to improve the robustness to noise. Afterward, the features related to the distance, speed, direction, and the elevation angle of the moving object are determined by the proposed adaptive signal analysis techniques and the random forest is applied for classification. The proposed system has the capability to precisely distinguish and identify eight motions, including waving, moving to the left or right, patting, pushing, pulling, and rotating clockwise or anticlockwise, with an accuracy of 95%. Experiments demonstrate the capability of the proposed hand gesture recognition system to classify different movements precisely.

Chronic fatigue syndrome (CFS) is a disease in which fatigue that interferes with daily life persists for six months or longer. The number of patients with CFS is increasing, as CFS-like symptoms have been reported to occur in the sequelae of both COVID-19 infection and the SARS-CoV-2 vaccine, both of which have become significant issues in recent years. While the pathogenesis mechanism is not yet fully understood, research suggests that oxidative stress (OS) may play a role in the development of CFS. In this paper, we discuss the antioxidant potential of the antioxidant formulation Twendee M® (TwM) and the results of a questionnaire that monitored changes in symptoms before and after TwM in a total of 23 men and women diagnosed with CFS. TwM is a supplement containing 15 different ingredients, and has a strong antioxidant capacity that cannot be achieved with a single antioxidant ingredient. The results of the questionnaire showed that TwM significantly improved all of the major symptoms of CFS, including fatigue, muscle pain, joint pain, sleep disturbance, decreased memory and concentration, and headache. TwM was shown to alleviate various symptoms of CFS and improve quality of life.

Clarifying the impact mechanism of digital transformation of enterprises on the M&A efficiency of listed companies can provide a factual basis for improving capital market regulatory policies. Taking the mergers and acquisitions of listed companies from 2007 to 2021 as a research sample, the influence mechanism of the digital transformation degree of companies on their M&A efficiency was studied. The research results show that the digital transformation of listed companies will improve their M&A efficiency. Digital transformation will reduce the degree of mispricing of stocks of M&A companies, curb conflicts between managers and agents of M&A companies, and improve their M&A efficiency. Further research finds that the promotion effect of digital transformation on M&A efficiency is more significant in non-state-owned companies, with a higher degree of financing constraint and high analyst attention. In the future, regulatory authorities should actively promote the digital transformation of listed companies, curb mispricing and management agency problems in the capital market with digital governance, and improve the efficiency of mergers and acquisitions in the capital market.

In this study, based on frost formation data provided by Harbin Meteorological Bureau, combined with geographical factors, temperature and population density, linear fitting, Mann-Kendall mutation test, pettitt method and sliding T test were used to analyze the spatio-temporal variation characteristics of frost date in Harbin Municipality and the effects of geographical factors, temperature and population density on frost regularity. The results showed that (1) The earliest year of FSD appeared was 1966 and 1967, on the 255th, i.e., August 18th, and the latest was 283 days, i.e., October 10th, 2006. The earliest year in which the FED appeared was April 24th of 2015, the 114th day of that year, and the latest was April 21st of 1974, the 141st day of that year. The year with the most frost was 2012, with 161 days, and the year with the shortest was 1966, with 123 days. (2) Throughout the study period, FSD increased by 7.8 days at a rate of -1.27d/10a, FED increased by 10.9 days at a rate of 1.77d/10a, and FFS increased by 18.9 days at a rate of 3.05d/10a. The tendency rate of FSD and FFS at each site in Harbin showed an increasing trend. For FED, the tendency rate of some sites showed an increasing trend. In general, FSD showed a delayed trend, FED showed an advanced trend, and FFS showed a prolonged trend. Using the method of unary linear regression, FSD of each site showed an increasing trend, FFS showed an increasing trend, and FED showed a decreasing trend in general. (3) Throughout the study period, FSD was mutated in 2000, and the arrival time of it in the study area averaged the 265th, i.e., September 22nd, and after that, the arrival time of it changed to the 272nd, i.e., September 29th of that year. FED was mutated in 2006, and the arrival time of it in the study area averaged 128th, i.e., April 8th. After the mutation, the arrival time of FED changed to 121st, i.e., April 1st of that year. FFS was mutated in 2004. Before the mutation, with an average arrival time of 137days in the study area .But after that, the time changed to 150 days.(4) FSD and FFS in Harbin Municipality were negatively correlated with latitude and positively correlated with temperature, while FED was positively correlated with latitude and negatively correlated with temperature. The FSD, FED and FFS in the central part of Harbin Municipality were the earliest, the latest and the longest, respectively, so the Pearson correlation coefficient method and the influence of longitude could not be reflected in the multiple regression. Several factors were judged by grey correlation analysis method. The longitude is significantly related to FSD, FED and FFS.

The main aim of this study was to determine the prevalence of plasmid-mediated colistin resistance mcr-1 to mcr-5 genes among colistin and multi-drug resistant Enterobacterales, Pseudomonas aeruginosa and Acinetobacter sp strains isolated from patients in a tertiary hospital in the city of Toluca, Mexico. 241 strains were included in the study. The presence of mcr genes among these strains was assessed by PCR and sequencing. In the case of mcr-carrying E. coli, further PCR tests were performed to determine the presence of blaCTX-M and whether the strains belonged to the O25b-ST131 clone. Conjugation experiments were carried to assess plasmid-mediated colistin resistance horizontal transmission. 12 strains (5.0%), of which four were E. coli; four, P. aeruginosa; three, K. pneumoniae and one, E. cloacae, were found to be resistant to colistin. Of these strains, two E. coli isolates were found to carry mcr-1. Both mcr-1-carrying E. coli strains were found to co-express blaCTX-M, belong to the O25b-ST131 clone and horizontally transmit their colistin resistance. The results of this study confirm the presence of plasmid-mediated colistin resistance in hospitalized patients in Mexico and demonstrated that the multidrug-resistant O25b-ST131 E. coli clone can acquire mcr genes and transmit such resistance trait to other bacteria.

Background: Multidrug-resistant bacteria present resistance mechanisms against β-lactam antibiotics, such as Extended-Spectrum Beta-lactamases (ESBL) and Metallo-β-lactamases enzymes (MBLs) operon encoded in Gram-negative species. Likewise, Gram-positive bacteria have evolved other mechanisms through mec genes, which encode modified penicillin-binding proteins (PBP2). This study aimed to determine the presence and spread of β-lactam antibiotic resistance genes and the microbiome circulating in Quito’s Public Transport (QTP). Methods: A total of 29 station turnstiles were swabbed to extract the surface environmental DNA. PCRs were performed to detect the presence of 13 antibiotic resistance genes and to identify 16S rDNA barcoding, followed by clone analysis, Sanger sequencing and BLAST search. Results: ESBL genes blaTEM-1 and blaCTX-M-1 and MBL genes blaOXA-181 and mecA were detected along QPT stations. Two subvariants were found for blaTEM-1, blaCTX-M-1, and blaOXA-181. Almost half of the circulating bacteria found at QPT stations were common human microbiota species including those classified by the WHO as pathogens of critical and high-priority surveillance. Conclusions: β-lactam antibiotic resistance genes are widely spread throughout QPT. This is the first report of blaOXA-181 in environmental samples in Ecuador. Moreover, we detected a new putative variant of this gene. Some commensal coagulase-negative bacteria may have a role as mecA resistance reservoirs

The global pandemic caused by the new coronavirus has largely changed established business practices. The aim of the study is to present the results of eighteen-month intensive research into the effects of the pandemic on e-consumer behavior. In one of the most active e-commerce markets in Europe, the Czech Republic, we analyzed a sample of more than one and a half million Facebook users in terms of their C2B interactions on the B2C activities of the five major e-commerce market players. The measurements were carried out in three periods, which corresponded to the onset of the first wave, peak, and fading of the second wave of the pandemic. This enabled us to monitor the effect of seasonality and the stabilization of patterns of consumer behavior during the coronavirus crisis. The results suggest that a specific panic pattern of e-consumer behavior was developed at the time of the onset of the pandemic. However, as the pandemic progressed, the market has adapted to a new normal, which, as evidenced by the change in trends, appears to be a combination of the pre-pandemic and pandemic behavioral patterns. Using a statistical analysis, it was possible to identify delta of changes within the patterns of consumer behavior, thus fulfilling the final condition for creating an empirical model of the COVID-19 pandemic impacts on e-consumer behavior presented in this study.

The local climate effects of utility-scale photovoltaic (PV) plants have also attracted more and more attention with the rapid development of PV industry. Turbulent fluxes and intensity characteristics for the PV plant and the adjacent reference site are investigated in the gobi area in Wujianqu in Xinjiang. Results indicate that near surface boundary layer is more unstable during the daytime while is more stable at the night in the PV plant than the reference site. The average roughness is 0.089m and 0.041m for the PV plant and the reference site respectively. The turbulence intensity in the vertical direction (I_w) of the PV plant is higher than the reference site especially during the daytime. The turbulent kinetic energy of the PV plant during the daytime is lower than the reference site.The momentum in the PV plant is higher than the reference site, especially during the daytime. Compared to the reference site, the PV plant has higher sensible heat flux and less latent heat flux. Site specific turbulent intensity relationships were developed for the PV plant and the reference site by analyzing wind components as a function of stability parameter (z/L). The turbulent components of wind followed 1/3 power law in the unstable conditions and stable conditions in the PV plant and the reference site.

The natural history of COVID-19 caused by SARS-CoV-2 is extremely variable, ranging from asymptomatic infection, to pneumonia, and to complications eventually fatal. We propose here the first model, explaining how the outcome of first, crucial 10-15 days after infection, hangs on the balance between the cumulative dose of viral exposure and the efficacy of the local innate immune response (natural IgA and IgM antibodies, MBL). If SARS-CoV-2 runs the blockade of this innate immunity and spreads from the upper airways to the alveoli in the early phases of the infections, it can replicate with no local resistance, causing pneumonia and releasing high amounts of antigens. The delayed and strong adaptive immune response (high affinity IgM and IgG antibodies) that follows, causes severe inflammation and triggers mediator cascades (complement, coagulation, and cytokine storm) leading to complications often requiring intensive therapy and being, in some patients, fatal. Strenuous exercise and high flow air in the incubation days and early stages of COVID-19, facilitates direct penetration of the virus to the lower airways and the alveoli, without impacting on the airway’s mucosae covered by neutralizing antibodies. This allows the virus to bypass the efficient immune barrier of the upper airways mucosa in young and healthy athletes. In conclusion, whether the virus or the adaptative immune response reach the lungs first, is a crucial factor deciding the fate of the patient. This “quantitative and time-sequence dependent” model has several implications for prevention, diagnosis, and therapy of COVID-19.

This study uses a recently developed theory and technique to examine post-acquisition evidence as to the motives for mergers and acquisitions(M&As), and decomposed the M/B ratio into three components: firm-specific error, time-series sector error, and long-run value-to-book. We make a multidimensional grouping according to the frequency of M&As , payment method, proportion of shares acquired, M/B ratio before the merger and total assets of the acquirers before the merge. The results confirm that M&As involve multiple motives, such as market timing, industry and economic shocks, agency and hubris. Using a sample of 2,035 M&As in China, we find that 59% are related to market timing, 68% are related to agency and hubris, 21% are related to industry and economic shocks, 51% are related to multiple motives. Our empirical research finds that the main motives for M&As of listed companies in China are value-decreasing, which have negative impact on the acquirers‘ sustainable development.

The World Health Organization(WHO) in 2016 considered mHealth as: “the use of mobile wireless technologies including smart devices such as smartphones and smartwatches for public health” as an important resource for health services delivery and public health given their ease of use, broad reach and acceptance. WHO emphasizes the potential of this technology to increase access to health information, services and skills as well as promoting positive changes in health behaviors and management of diseases. In this regard, the capability of smartphones and smartwatches for m-health monitoring as well as verification of the patient the signal has become an important component of mHealth system. Most of the smartwatches could extract more than one bioelectrical signal therefore, therefore they provide suitable platform for extracting health data for e-monitoring. The existing approaches have not considered the integrity of data obtained from these smart devices. Therefore, it is important that the integrity of the collected data be verified continuously through user authentication. This could be done using any of the bioelectrical signals extracted and transmitted for e-monitoring. In this article, a smartwatch is used for extracting bioelectrical signal before decomposing the signal into sub-bands of Detail and Approximation Coefficient for user authentication. To select suitable features using biorthogonal wavelet decomposition of signal from a non-intrusive extraction, a detailed experiment is conducted extracting suitable statistical features from the bioelectrical signal from 30 subjects using different biorthogonal wavelet family. Ten features are extracted using Biorthogonal wavelet to decompose the signal into three levels of sub-band Detail and Approximation Coefficient and features extracted from each level the decomposed Detail and Approximation Coefficients. Comparison analysis is done after the classification of the extracted features based on the Equal Error Rate (EER). Using Neural Network (NN) classifier, Biorthogonal Wavelet Detail Coefficient Sub-band level 3 of bior1.1 achieved the best result of EER 13.80% with the fusion of the best sub-band three levels of bior1.1 achieving a better result of 12.42% EER.

The CCAAT/enhancer-binding protein β (C/EBPβ) is a transcription factor that regulates cellular proliferation, differentiation, apoptosis and tumorigenesis. Although the pro-oncogenic roles of C/EBPβ have been implicated in various human cancers, how it contributes to tumorigenesis or tumor progression has not been determined. Immunohistochemistry with human non-small cell lung cancer (NSCLC) tissues revealed that higher levels of C/EBPβ protein are expressed compared to normal lung tissues. Knockdown of C/EBPβ by siRNA reduced the proliferative capacity of NSCLC cells by delaying G₂/M transition of the cell cycle. In C/EBPβ-knockdown cells, a prolonged increase in phosphorylation of cyclin dependent kinase 1 at tyrosine 15 (Y15-pCDK1) was displayed with increased Wee1 and decreased Cdc25B expression, simultaneously. ChIP analysis showed that C/EBPβ bound to distal promoter regions of WEE1 and repressed WEE1 transcription through the interaction with histone deacetylase 2. Treatment of C/EBPβ-knockdown cells with a Wee1 inhibitor induced a decrease in Y15-pCDK1 and recovered cells from G₂/M arrest. In the xenograft tumors, the depletion of C/EBPβ significantly reduced tumor growth. Taken together, these results indicate that Wee1 is a novel transcription target of C/EBPβ that is required for the G₂/M phase of cell cycle progression, ultimately regulating proliferation of NSCLC cells.

Visible Light Communication (VLC) uses an intensity-modulation and direct-detection (IM/DD) scheme to transmit data. The light source utilized in VLC structures is constantly switched on and off rapidly, resulting in flickering. Furthermore, most of illumination systems exclude dimming support to permit customers to dim the light source to the desired stage. Therefore, the modulation scheme for information transmission in VLC should consist of flicker mitigation and dimming manage abilities. Double inverse pulse position modulation (DIPPM), sub-carrier pulse position modulation (SC-L-PPM), and M-ary variable pulse position modulation (M-VPPM) are recommended for minimizing the flicker issues and supporting an excessive degree of dimming for VLC systems. In this paper, a comparison is introduced between DIPPM, SC-L-PPM, and M-VPPM according to error performance and bit rate. In addition, a simulation is carried out to measure the optical power distribution for a LED lamp in an indoor room topology for each modulation technique. The obtained results indicated that SC-L-PPM is the best choice regarding the bit error rate (BER) and optical power distribution compared to the other two schemes. A 10^-6 BER is achieved with a very low power requirement at L=8, while a remarkable power distribution of 1.5 to 6.5 dBm is observed from 3×5×5 m³ room corners to the center, respectively. According to the bit rate, it is noticed that, M-VPPM is the most efficient one compared to the two other schemes. It achieves 2.3×10⁷ bps at signal to noise ratio (SNR) of 22 dB and M=8.

The current study characterizes the transient M/M/1 queue manifold info-geometrically, through devising Fisher Information matrix(FIM) and its inverse(IFIM). Additionally, the impact of stability on the existence of IFIM and explore the geodesic equations of motion has been revealed. More potentially, the paper discusses the relationship between stability and the Gaussian curvature, as well as the connections between queueing theory, information geometry, , Riemannian geometry, and the Theory of Relativity.

The Active Distribution Networks (ADNs) are Multi-Input Multi-Output (MIMO) systems with coupled dynamics which cause interactions among the control loops of the Distributed Energy Resources (DERs). This undesired effect lead to performance degradation in the voltage control. To mitigate the effects of these unavoidable coupling, the present paper proposes a systematic design procedure based on the analysis of the interaction's sources. In details, each DER is equipped with a double loop PI to control the active and reactive powers output by the Voltage Source Converter (VSC) which connects the DER to the network's node. Furthermore, to guarantee Ancillary Services (ASs), the two loops are coupled by a simple mechanism of cooperation of the active power to voltage regulation realized by a filtered droop law. To achieve voltage regulation with reduced loop interactions, the PI parameters and the filter's pulse are designed according to a two sequential steps procedure based on the (Internal Model Control) IMC technique. Simulation studies are finally presented to demonstrate that the proposed design method achieves both reduction of the loop interaction and robust voltage control in presence of model parameter uncertainty in the MIMO model.

This paper presents a new approach to suppress interference between neighbouring radiating elements resulting from surface wave currents. The proposed technique will enable the realization of low-profile implementation of highly dense antenna configuration necessary in SAR and MIMO communication systems. Unlike other conventional techniques of mutual coupling suppression where decoupling slab is located between the radiating antennas the proposed technique is simpler and only requires embedding linear slots near the periphery of the patch. Attributes of this technique are (i) significant improvement in the maximum isolation between the adjacent antennas by 26.7 dB in X-band, & >15 dB in Ku and K-bands; (ii) reduction in edge-to-edge gap between antennas to 10 mm (0.37λ); and (iii) improvement in gain by >40% over certain angular directions, which varies between 4.5 dBi to 8.2 dBi. The proposed technique is simple to implement at low-cost.

Three dimension (3D) Multi-input-multi-output (MIMO) scheme, which exploits another dimension of the spatial resource, is one of the enabling technologies for the next generation mobile communication. As the elevation angle in 3D-MIMO channel model might varies against the height of the base station transmit antenna, it has to be taken into account carefully. In this paper, the impact of antenna height on the channel characteristics of 3D MIMO channel is investigated by using the intelligent ray launching algorithm (IRLA). Three typical street scenarios, i.e., the straight street, the fork road and the cross road, are selected as benchmarks. On the basis of simulations, joint and marginal probability density functions (PDFs) of both the elevation angle of departure (EAoD) and the elevation angle of arrival (EAoA) are obtained. The elevation angle spread (AS) and the delay spread (DS) under various antenna heights are also discussed. Simulation results indicate that the PDFs of EAoD and EAoA vary characteristics under different street scenarios. Moreover, the minimum value of the DS can be achieved when the antenna height is half of the building height.