Powder and SLM additively manufactured parts of X5CrNiCuNb17-4 maraging steel were systematically investigated by electron microscopy to understand the relationship between the properties of the powder grains and the microstructure of the printed parts. We prove that satellites, irregularities and superficial oxidation of powder particles can be transformed into an advantage through the formation of nanoscale (AlMnSiTiCr)-oxides in the matrix during the printing process. The nano-oxides showed extensive stability in terms of size, spherical morphology, chemical composition and crystallographic disorder upon in situ heating up to 950°C in the scanning transmission electron microscope. Their presence thus indicates a potential for oxide-dispersive strengthening of this steel, which may be beneficial for creep resistance at elevated temperatures. The nucleation of copper clusters and their evolution into nanoparticles as well as the precipitation of Ni and Cr particles upon in situ heating have as well been systematically documented.

This work focuses on the study of the microstructure, hardening and stiffening effect caused by the secondary phases formed in titanium matrices. These secondary phases were originated from reactions between the matrix and boron particles added in the starting mixtures of the composites. Not only was the composite composition studied as an influencing factor in the behaviour of the composites, but also different operational temperatures. Three volume percentages of boron content were tested (0.9, 2.5 and 5 vol % of amorphous boron). The manufacturing process used to produce the composites was inductive hot pressing, which operational temperatures were between 1000 °C to 1300 °C. Specimens showed optimal densification. Moreover, microstructural study revealed the formation of TiB in various shapes and proportions. Mechanical testing confirmed that the secondary phases had a positive influence on the properties of the composites. In general, adding boron particles increased the hardness and stiffness of the composites; however rising temperatures resulted in greater increases in stiffness than in hardness.

A wide variety of pump and treat methods like chemical precipitation, adsorption, ion exchange and reverse osmosis have been trialled for many decades for fluoride removal from groundwater, but the problem of fluoride contaminated water remains in many parts of the world largely because these processes require constant monitoring, are expensive to implement and maintain at decentralised scale due to lack of reticulation infrastructure, and possess sludge disposal problem. This paper presents an overview of various fluoride removal processes and the limitations associated with each process and the application of in-situ permeable reactive barrier for remediating fluoride contaminated groundwater is explored, which displays the potential to be a cost effective, low maintenance and energy intensive technology.

In this work, we designed a MEMS device which allows simultaneous direct measurement of mechanical properties during deformation under external stress and characterization of the evolution of microstructure of nanomaterials within a transmission electron microscope. This MEMS device makes it easy to establish the correlation between microstructure and mechanical properties of nanomaterials. The device uses piezoresistive sensors to qualitatively measure the force and displacement of nanomaterials, e.g., in wire and thin plate forms. The device has a theoretical displacement resolution of 0.19 nm and a force resolution of 2.1 μN. The device has a theoretical displacement range limit of 2.74 μm and a load range limit of 27.75 mN.

This study aims to develop an in-situ field repair approach, special for aircraft composite structures, to enhance the interlaminar toughness of plain woven composites (PWCs) by adding multi-walled carbon nanotubes (MWCNTs). MWCNTs are dispersed at each interface between prepreg layers by means of solvent spraying with the density is 1.58 g/m2. And then, the layers are stacked with the predefined sequence and cured at 120℃ and 1 bar pressure using the heat repairing instrument. Moreover, double cantilever beam (DCB) standard test is used to investigate the interlaminar toughening effect due to the MWCNTs. For comparison, original samples are also prepared, the results indicate that the introduction of MWCNTs can favorably enhance the interlaminar toughness of PWCs at field repair approach and the Mode I fracture energy release rate GIC increases by 102.92%. Based on finite element method (FEM) of continuum damage mechanics, the original and MWCNTs toughening specimen under DCB Mode I fracture are modeled and analyzed. The simulation and experiment are in good agreement. Finally, the toughening mechanism of MWCNTs is explored by scanning electron microscope (SEM), it is founded that a large amount of Fiber-matrix (F-M) interface debonding and matrix cracking of mountain shape are the major modes of fracture accompanied with few fiber breakage and matrix peeling off for the MWCNTs toughening specimens.

Groundwater contamination is an ever-growing environmental issue that has attracted much and undiminished attention for the past half century. Groundwater contamination may originate from both anthropogenic (e.g., hydrocarbons) and natural compounds (e.g., nitrate and arsenic); to tackle the removal of these contaminants, different technologies have been developed and implemented. Recently, bioelectrochemical systems (BES) have emerged as a potential treatment for groundwater contamination, with reported in situ applications that showed promising results. Nitrate and hydrocarbons (toluene, phenanthrene, benzene, BTEX and light PAHs) have been successfully removed, due to the interaction of microbial metabolism with poised electrodes, in addition to physical migration due to the electric field generated in a BES. The selection of proper BESs relies on several factors and problems, such as the complexity of groundwater and subsoil environment, scale-up issues, and energy requirements that need to be accounted for. Modeling efforts could help predict case scenarios and select a proper design and approach, while BES-based biosensing could help monitoring remediation processes. In this review, we critically analyze in situ BES applications for groundwater remediation, focusing in particular on different proposed setups, and we identify and discuss the existing research gaps in the field.

Ferroelectric materials are crucial for today’s technological society, and nanostructured ferroelectric materials are important for downscaling of devices. Controlled and reproducible synthesis of these materials are therefore of immense importance. Hydrothermal synthesis is a well-established synthesis route, with a large parameter space for optimization, but a better understanding of nucleation and growth mechanisms is needed for full utilization and control. Here we use in situ X-ray diffraction to follow the nucleation and growth of BaTiO₃ formed by hydrothermal synthesis using two different titanium precursors, an amorphous titania precipitate slurry and a Ti-citric acid complex solution. Sequential Rietveld refinement was used to extract the time dependency of lattice parameters, crystallite size, strain and atomic displacement parameters. Phase pure BaTiO₃ nanoparticles 10 - 15 nm in size were successfully synthesized at different temperatures (100, 125, and 150 °C) from both precursors after reaction times ranging from a few seconds, to several hours. The two precursors resulted in phase pure BaTiO₃ with similar final crystallite size. Finally, two different growth mechanisms were revealed, where the effect of surfactants present during hydrothermal synthesis is discussed as one of the key parameters.

The microstructure of Al-5Fe-1.5Er alloy was characterized and analyzed by using XRD, SEM, TEM and EDS. The effect of microstructure on the behavior of crack initiation and propagation was investigated by in situ tensile testing. Results show that the microstructure consists of α-Al matrix, Al₃Fe, Al₄Er, eutectic phase Al₃Fe + Al₄Er, while the 1.5 wt.% Er was added in Al-5Fe alloy. The twin structure of the Al₃Fe phase was observed, and the twin plane is {001}. Moreover, a continuous concave and convex interface structure of the Al₄Er has been found. Al₃Fe is in the form of a sheet with a clear gap inside.In situ tensile tests of the alloy at room temperature show that the crack initiation occured mainly in the Al₃Fe phase, and that the crack propagation modes include intergranular and transgranular expansion. Crack transgranular expansion is due to the strong binding ability between Al₄Er phases and surrounding organization, and the continuous concave and convex interface structure of the Al₄Er provides a significant meshing effect on the matrix and eutectic structure.

In this present study, 3-pentadecyl-phenol was selected as a modifier to prepare a foamable phenolic resin with excellent performance, which was successfully prepared by in-situ modification. Fourier transform infrared spectroscopy (FT-IR) and nuclear magnetic resonance (¹H NMR, ¹³C-NMR) were used to test and characterize the molecular structure of the modified resin. The results showed that 3-pentadecyl-phenol successfully modified the molecular structure of phenolic resin with a reduction in resin gel time. The effect of changing the added amount of 3-pentadecyl-phenol on the mechanical properties, microstructure and flame retardancy of the modified foam was investigated. The results showed that when the amount of added 3-pentadecyl-phenol was 15% of the total amount of phenol, this resulted in the best toughness of the modified foam, which could be increased to 300% compared to the bending deflection of the unmodified phenolic foam. The cell structure showed that the modified phenolic foam formed a more regular and dense network structure and the closed cell ratio was high. Furthermore, the compressive strength, bending strength, and limited oxygen index were improved, while the water absorption rate was lowered. However, the foam density could be kept below 40 mg/cm³, which does not affect the load.

New approaches to collect in-situ data are needed to complement the high spatial (10~m) and temporal (5-day) resolution of Copernicus Sentinel satellite observations. Making sense of Sentinel observations requires high quality and timely in-situ data for training and validation. Classical ground truth collection is expensive, lacks scale, fails to exploit opportunities for automation, and is prone to sampling error. Here we evaluate the potential contribution of opportunistically exploiting crowd-sourced street-level imagery to collect massive high-quality in-situ data in the context of crop monitoring. This study assesses this potential by answering two questions: 1) what is the spatial availability of these images across the European Union (EU)? and 2) can these images be transformed to useful data? To answer the first question, we evaluated the EU availability of street-level images on Mapillary - the largest open-access platform for such images - against the Land Use and land Cover Area frame Survey (LUCAS) 2018, a systematic surveyed sampling of 337031 points. For 37.78% of the LUCAS points a crowd-sourced image is available within a 2-km buffer, with a mean distance of 816.11 m. We estimate that 9.44% of the EU territory has a crowd-sourced image within 300-m from a LUCAS point, illustrating the huge potential of crowd-sourcing as a complementary sampling tool. After artificial and built up (63.14%), and inland water (43.67%) land cover classes, arable land has the highest availability at 40.78%. To answer the second question, we focus on identifying crops at parcel level using all 13.6 million Mapillary images collected in the Netherlands. Only 1.9% of the contributors generated 75.15% of the images. A procedure was developed to select and harvest the pictures potentially best suited to identify crops using the geometries of 785710 Dutch parcels and the pictures' meta-data such as camera orientation and focal length. Availability of crowd-sourced imagery looking at parcels was assessed for 8 different crop groups with the 2017 parcel level declarations. Parcel revisits during the growing season allowed to track crop growth. Examples illustrate the capacity to recognize crops and their phenological development on crowd-sourced street-level imagery. Consecutive images taken during the same capture track allow selecting the image with the best unobstructed view. In the future, dedicated crop capture tasks can improve image quality and expand coverage in rural areas.

Hybrid inorganic-polymer nanocomposites can be employed in diverse applications due to the potential combination of desired properties from both the organic and inorganic components. The use of novel bottom-up in situ synthesis methods for the fabrication of these nanocomposites is advantageous compared to top-down ex situ mixing methods, as it offers increased control over the structure and properties of the material. In this review, the focus will be on the application of the sol-gel process for the synthesis of inorganic oxide nanoparticles in epoxy and polysiloxane matrices. The effect of the synthesis conditions and the reactants used on the inorganic structures formed, the interactions between the polymer chains and the inorganic nanoparticles, and the resulting properties of the nanocomposites are appraised from several studies over the last two decades. Lastly, alternative in situ techniques and the applications of various polymer-inorganic oxide nanocomposites are briefly discussed.

The building envelope has the most significant contribution in the reduction of the building energy consumption. Application of new, alternative and improved materials and systems has an important impact on the buildings performances. This paper is focused on the thermal transmittance, as an indicator of the thermal conductance of the construction element. It includes comparisons of the U-values, calculated by software, with those measured in situ on three representative façade walls. The walls have been constructed with the new wall system Fragmat NZ-1, a new product in Macedonian buildings. This research provides basic information on the thermal transmittance of the system. The results of the analysis show that the in situ measuring is a useful tool in validation of the precision of analytically calculated values, since it was difficult to obtain precise results from the analytical calculations only, especially when the layers are with non-uniform thickness.

Sea surface salinity (SSS) is one of the Essential Climate Variables (ECVs) as defined by the Global Climate Observing System (GCOS). Acquiring high-quality SSS datasets with high spatial-temporal resolution is cruicial for research on the hydrological cycle and earth climate. This study assessed the quality of SSS data provided by four high-resolution ocean reanalysis products, including the Hybrid Coordinate Ocean Model (HYCOM) 1/12° global reanalysis, the The Copernicus Global 1/12° Oceanic and Sea Ice GLORYS12 Reanal-ysis, the Simple Ocean Data Assimilation (SODA) reanalysis, the ECMWF Oceanic Reanalysis System 5 (ORAS5) product and the Estimating the Circulation and Climate of the Ocean Phase II (ECCO2) reanalysis. Regional comparison in the Mediterranean Sea shows that reanalysis largely depicts the accurate spatial SSS structure away from river mouths and coastal areas but slightly underestimates the mean SSS values. Better SSS reanalysis performance is found in the Levantine Sea while larger SSS uncertainties are found in the Adriatic Sea and the Aegean Sea. The global comparison with CMEMS level-4 (L4) SSS show generally con-sistent large-scale structures. The mean ΔSSS between monthly gridded reanalysis data and in situ analyzed data is -0.1 PSU in the open seas between 40°S and 40°N with the mean Root Mean Square Deviation (RMSD) generally smaller than 0.3 PSU and the majority of correlation coefficients higher than 0.5. Comparison with collocated buoy salinity shows that reanalysis products well captures the SSS variations at the locations of tropical moored buoy arrays at weekly scale. Among all the four products, the data quality of HYCOM re-analysis SSS is highest in marginal sea, GLORYS12 has the best performance in the global ocean especially in tropical regions. Comparatively, ECCO2 has the overall worst performance to reproduce SSS states and variations by showing the largest discrepancies with CMEMS L4 SSS.

Conditional generative adversarial networks (CGANs) learn a mapping from conditional input to observed image and perform tasks in image generation, manipulation and translation. In-situ monitoring uses sensors to obtain real-time information of additive manufacturing (AM) processes that relate to process stability and part quality. Understanding the correlations between process inputs and in-situ process signatures through machine learning can enable experimental-driven predictions of future process inputs. In this research, in-situ data obtained during a metallic powder bed fusion AM process is mapped with a CGAN. A single build of two turbine blades is monitored using EOSTATE Exposure OT, a near-infrared optical tomography system of the EOS M290 system. Layerwise images generated from the in-situ monitoring system were paired with a conditional image that labeled the specimen cross-section, laser-scan stripe overlap and z-distance to part surfaces. A CGAN was trained using the turbine blade data set and employed to generate new in-situ layerwise images for unseen conditional inputs.

Structure quality of LuFeO3 epitaxial layers grown by pulsed-laser deposition on sapphire substrates with and without platinum interlayers has been investigated by in-situ high-resolution x-ray diffraction (reciprocal-space mapping). The parameters of the structure such as size and misorientation of mosaic blocks have been determined as functions of the thickness of LuFeO3 during the PLD growth and for different platinum interlayers thicknesses up to 40 nm. The x-ray diffraction results combined with ex-situ scanning electron microscopy and high-resolution transmission electron microscopy demonstrate that the Pt interlayer significantly improves the structure of LuFeO3 by reducing the misfit of the LuFeO3 lattice with respect to the material underneath.

The issues of metallic scrap management and its utilization in manufacturing plants are nowadays intensely considered to address essential sustainability guidelines. Efficient recycling procedure for shop floor metallic scrap is not yet available because of abundance and contamination of nonmetallic constituents. Other ferrous metallic scrap are melted and purified during secondary steelmaking to get products in the form of blooms and billets are obtained. This study illustrates the potential of powder technology (powder metallurgy (PM) and metal injection molding (MIM)) based process for solid-state recycling and attainment of usable products. Industrially downgraded grinding sludge is pulverized and used as a raw material. Results showed properties of sintered parts are significantly improved due to in-situ reduction and densification during sintering. Recyclability Index (RI) was created to compare the effect of process variables on obtained products. Based on RI, recycled ferrous parts have about 70% comparable properties with equivalent pure iron parts. Complex reduction and sintering behavior in MIM, particularly, diffusion and pore volume kinetics limits applicability of MIM with this recycling approach. However, few industrial parts were developed and manufactured by PM based approach to validate the applicability of this novel recycling-cum-manufacturing process for the production of porous parts.

MoS₂/TiO₂ nanostructures made of MoS₂ nanoparticles covering TiO₂ nanosheets have been synthesized, either via ex-situ or in-situ approaches. Morphology and structure of MoS₂/TiO₂ hybrid nanostructures have been investigated and imaged by means of X-ray diffraction (XRD) analysis and high-resolution transmission electron microscopy (HRTEM), while the vibrational and the optical properties have been investigated by Raman, Fourier-transform infrared spectroscopy (FTIR) and UV−visible (UV-Vis) techniques. The different stacking degrees together with the size distribution of the MoS₂ nanosheets, decorating the TiO₂ nanosheets, have been carefully obtained from HRTEM images. The nature of the surface sites on the main exposed faces of both materials has been detected by means of in-situ FTIR spectra of adsorbed CO probe molecule. The results coming from the ex-situ and in-situ approaches will be compared, by highlighting the role of the synthesis processes in affecting morphology and structure of MoS₂ nanosheets, including their curvature, surface defects, and stacking order. Some more, it will be shown that the in-situ approach is affecting the reactivity of the TiO₂ nanosheets too, hence in turn affects the MoS₂/TiO₂ nanosheets interaction.

Polymer flooding is one of the most successful chemical EOR methods, and is primarily implemented to accelerate oil production by sweep improvement. However, other benefits have extended the utility of polymers. During the last decade, it has been evaluated for an increasing number of fields, both offshore and onshore. This is a consequence of improved polymer properties, which extends the use to HTHS (high temperature high salinity) conditions and of improved understanding of flow mechanisms such as for heavy oil mobilization. A key issue in understanding polymer performance is to control and predict in-situ porous medium rheology. The first part of this paper reviews recent developments in understanding polymer flow in porous medium. Especially, polymer in-situ rheology and injectivity is discussed. The second part of this paper reports polymer flow experiments using the most applied polymer for EOR processes, HPAM (partially hydrolyzed polyacrylamide). The experiments address high rate near-wellbore behavior (radial flow) as well as reservoir rate steady state flow (linear flow) and discuss differences observed in terms of flow conditions. In addition, impact of oil on polymer rheology was investigated, and compared to single-phase polymer flow in Bentheimer sandstone rock material. Presence of oil leads to a reduction in apparent viscosity.

Cariogenic oral biofilms cause a considerable amount of recurrent dental caries around composite restorations every year, resulting in unprosperous oral health status and expensive restorative treatment for many patients. Quaternary ammonium monomers that can be copolymerized with the current dental resin systems have been increasingly explored for modulation of dental plaque biofilm growth over dental composite surfaces. Here, we investigated the effect of bis(2-methacryloyloxyethyl) dimethylammonium bromide (QADM), against human overlying mature oral biofilms grown intra-orally in human participants for 7 and 14 days, for the first time. Seventeen volunteers wore palatal devices containing composite specimens containing 10% by mass of QADM or a control composite without QADM. After 7 and 14 days, the adherent biofilms were collected for determination of bacterial counts via colony-forming unit (CFU) counts. The biofilm viability, chronological changes, and percentage coverage were also determined by live/dead staining. QADM composites caused a significant inhibition of S. mutans biofilm formation for up to seven days. No difference in the CFU values were found for the 14-day period. Our findings suggest that (1) QADM composite was successful in inhibiting 1-3 day biofilms in the oral environment in vivo; (2) QADM significantly reduced the portion of S.mutans group in a time course where patients at high risk of caries would develop initial enamel carious lesions; and (3) stronger antibiofilm activity is required for the control of mature long-term cariogenic biofilms. These results provide a perspective on the value of integrating bioactive restorative materials with traditional caries management approaches into clinical practice. Contact-killing strategies via dental materials aiming to prevent or at least reduce high numbers of cariogenic bacteria seem to be a promising approach in patients at high risk of recurrence of dental caries around composites.

Bamboo plastic composites have become a hot research topic and a key focus of research. However, the many strong, polar, hydrophilic hydroxyl groups in bamboo flour (BF) results in poor interfacial compatibility between BF and hydrophobic polymers. Maleic anhydride-esterified (MAH-e-BF) and lactic acid-esterified bamboo flour (LA-e-BF) were prepared using an in situ solid-phase esterification method with BF as the raw material and maleic anhydride or lactic acid as the esterifying agent. Fourier transform infrared spectroscopy results confirmed that BF esterification with maleic anhydride and lactic acid was successful, with the esterification degrees of MAH-e-BF and LA-e-BF at 21.04 and 14.36%%, respectively. Esterified BF was characterized by scanning electron microscopy, contact angle testing, X-ray diffractometry, and thermogravimetric analysis. The results demonstrated that esterified BF surfaces were covered with graft polymer and the surface roughness and bonding degree of MAH-e-BF clearly larger than those of LA-e-BF. The hydrophobicity of esterified BF was significantly higher than BF and the hydrophobicity of MAH-e-BF better than LA-e-BF. The crystalline structure of esterified BF showed some damage, with MAH-e-BF exhibiting a greater decrease in crystallinity than LA-e-BF. Overall, the esterification reaction improved BF thermoplasticity, with the thermoplasticity of MAH-e-BF appearing better than LA-e-BF.

With the progress of immunotherapy in cancer, oncolytic viruses (OVs) are getting more and more attention during the past decade. Due to their cancer-selective and immunogenic property, OVs are considered ideal candidates to be combined with immunotherapy to increase both specificity and efficacy in cancer treatment. OVs preferentially replicate in and lyse cancer cells, generating pathogen-associated molecular patterns (PAMPs) and danger (damage)-associated molecular patterns (DAMPs). These signals trigger innate immune response to modulate the solid tumor microenvironment, resulting in in situ autovaccination leading to adaptive anti-virus and anti-tumor immunity. Here, we summarize the conceptual updates of oncolytic virotherapy, immunotherapy, and the strategies to enhance the virus-mediated anti-tumor immune response, including: 1. Arm OVs with cytokines to modulated innate and adaptive immunity; 2. Combine OVs with immune checkpoint inhibitors to release T cell inhibition; 3. Combine OVs with immune co-stimulators to enhance T cell activation.

Extensive in-situ resource utilisation (ISRU) will be essential to enable long-duration stays on Luna and Mars and reduce reliance on resupply from Earth. Early development of ISRU technologies has focused on standalone capabilities for specific targets related to life support and ascent propellant. An unexplored opportunity remains for greatly expanding the scope of materials that can be supplied by ISRU, and for integrating various technology platforms into a larger system. Recent advances in power-to-X technology aimed at decarbonising the global economy have made it possible to drive key chemical processes using electricity with small-scale, modular reactor. This paper proposes a vision for an integrated system of ISRU processes based on power-to-X technology to produce oxygen, hydrogen, water, methane, polymers, metal alloys, and synthetic fertilisers, using Martian regolith, atmosphere, and ice. A ‘building block’ strategy is adopted to convert raw materials into versatile intermediaries, which can then be combined to form essential products. A wider range of raw materials are available on Mars compared to Luna, suggesting greater opportunity for ISRU deployment to compensate for the greater time and cost requirements for a Mars resupply mission.

Background: We aimed to create a model of radiological and pathological criteria able to predict the upgrade rate of low-grade ductal carcinoma in situ (DCIS) to invasive carcinoma, in patients undergoing vacuum-assisted breast biopsy (VABB) and subsequent surgical excision. Methods: 3100 VABBs were retrospectively reviewed among which we reported 295 low-grade DCIS who subsequently underwent surgery. The association between patients’ features and the upgrade rate to invasive breast cancer (IBC) was evaluated by univariate analysis. Finally, we developed a predictive multivariable model based on the features which were significantly associated with the univariate analysis outcome. Results: the upgrade rate to invasive carcinoma was 10.8 %. At univariate analysis, the risk of upgrade was significantly lower in the absence of post- biopsy residual lesion (p<0.001), age > 50 (p=0.029), and in presence of low-grade DCIS only in specimens with microcalcifications (p=0.002). According to the final multivariable model, the predicted probability of diagnostic underestimation for a patient with all the three favourable features selected at univariate analysis was 1% (95% CI: 0.3%-4%). Conclusions: An easy to use predictive model of radiological and pathological criteria is able to identify patients with low-grade carcinoma in situ with low risk of upstaging to infiltrating carcinomas.

3D-printed aluminium alloy fabrications made by selective laser melting (SLM) offer a promising route for the production of small series of custom-designed heat exchangers with complex geometry and shape and miniature size. Alloy composition and printing parameters need to be optimized to mitigate fabrication defects (pores and microcracks) and enhance the part performance. The deformation response needs to be studied with adequate characterization techniques at relevant dimensional scale capturing the peculiarities of micro-mechanical behavior relevant to the particular article and specimen dimensions. Purposefully designed Al-Si-Mg 3D-printable RS-333 alloy was investigated with a number of microscopy techniques including in situ mechanical testing with a Deben Microtest 1 kN stage integrated and synchronized with Tescan Vega3 SEM to acquire high resolution image datasets for Digital Image Correlation (DIC) analysis. Dog bone specimens were 3D-printed in different orientation of gauge zone cross-section with respect to the fast laser beam scanning and growth directions. This corresponds to varying local conditions of metal solidification and cooling. Specimens show variation in mechanical properties, namely, Young’s modulus (65…78 GPa), yield stress (80–150 MPa), ultimate tensile strength (115–225 MPa) and elongation at break (0,75–1,4 %). Furthermore, the failure localization and character was altered with the change of gauge cross-section orientation. DIC analysis allowed correct strain evaluation that overcame the load frame compliance effect and helped to identify the unevenness of deformation distribution (plasticity waves) that ultimately resulted in exceptionally high strain localization near the ultimate failure crack position.

There are many new land use and land cover (LULC) products emerging yet there is still a lack of in-situ data for training, validation, and change detection purposes. The LUCAS (Land Use Cover Area frame Sample) survey is one of the few authoritative in-situ field campaigns, which takes place every three years in European Union member countries. More recently, a study has considered whether citizen science and crowdsourcing could complement LUCAS survey data, e.g., through the FotoQuest Austria mobile app and crowdsourcing campaign. Although the data obtained from the campaign were promising when compared with authoritative LUCAS survey data, there were classes that were not well classified by the citizens, and the photographs submitted through the app were not always of sufficient quality. For this reason, in the latest FotoQuest Go Europe 2018 campaign, several improvements were made to the app to facilitate interaction with the citizens contributing and to improve their accuracy in LULC identification. In addition to extending the locations from Austria to Europe, a change detection component (comparing land cover in 2018 to the 2015 LUCAS photographs) was added, as well as an improved LC decision tree and a near real-time quality assurance system to provide feedback on the distance to the target location, the LULC classes chosen and the quality of the photographs. Another modification was the implementation of a monetary incentive scheme in which users received between 1 to 3 Euros for each successfully completed quest of sufficient quality. The purpose of this paper is to present these new features and to compare the results obtained by the citizens with authoritative LUCAS data from 2018 in terms of LULC and change in LC. We also compared the results between the FotoQuest campaigns in 2015 and 2018 and found a significant improvement in 2018, i.e., a much higher match of LC between FotoQuest Go Europe and LUCAS. Finally, we present the results from a user survey to discuss challenges encountered during the campaign and what further improvements could be made in the future, including better in-app navigation and offline maps, making FotoQuest a model for enabling the collection of large amounts of land cover data at a low cost.

The interfacial polymerization (IP) of piperazine (PIP) and trimesoyl chloride (TMC) has been extensively utilized to synthesize nanofiltration (NF) membranes. However, it is still a huge challenge to monitor the IP reaction, because of the fast reaction rate and the formed ultra-thin film. Herein, two effective strategies were applied to reduce the IP reaction rate: (1) the introduction of hydrophilic interlayers between the porous substrate and the formed polyamide layer, and (2) the addition of macromolecular additives in the aqueous solution of PIP. As a result, in situ Fourier transform infrared (FT-IR) spectroscopy was firstly used to monitor the IP reaction of PIP/TMC with hydrophilic interlayers or macromolecular additives in the aqueous solution of PIP. Moreover, the formed polyamide layer growth on the substrate was studied in a real-time manner. The in situ FTIR experimental results confirmed that the IP reaction rates were effectively suppressed and that the formed polyamide thickness was reduced from 138 ± 24 nm to 46 ± 2 nm according to TEM observation. Furthermore, an optimized NF membrane with excellent performance was consequently obtained, which included boosted water permeation of about 141–238 (L/m²·h·MPa) and superior salt rejection of Na₂SO₄ > 98.4%.

Transition-metal-catalyzed amide bond formation from alcohols and amines is an atom-economic and eco-friendly route. Herein, we identified a highly active in situ N-heterocyclic carbene (NHC)/ruthenium (Ru) catalytic system for this amide synthesis. Various substrates, including sterically hindered ones, could be directly transformed into the corresponding amides with the catalyst loading as low as 0.25 mol%. In this system, we replaced the p-cymene ligand of the Ru source with a relatively labile cyclooctadiene (cod) ligand so as to more efficiently obtain the corresponding poly-carbene Ru species. Expectedly, the weaker cod ligand could be more easily substituted with multiple mono-NHC ligands. Further HR-MS analyses revealed that two tetra-carbene complexes were probably generated from the in situ catalytic system.

Metal and alloy toughening was the core and long-term research direction in materials filed. As grain size had bimodal distribution, micro/nano-structured alloys presented excellent comprehensive mechanical properties, and this had become one of the research hotspots and developing trends in the field of nanotechnology. In-situ tensile test was a direct and effective method to study the deformation mechanism of materials, which revealed the multiple mechanisms responding to feature grain sizes and provided reliable experimental means and research technique. Research on development of in-situ technique and its applications in mechanical properties was reviewed in this paper according to the recent advances on the modern mechanical properties for high strength and high plasticity alloy at home and abroad. The disadvantages of the present study of preparation methods and investigation techniques for high-performance alloy had been concluded. Finally, the development prospects of high strength and high plasticity alloy materials were analyzed.

The formation of solid solution series Cs_1-xM_xGaQ₂-mC64 (M = K, Rb; Q = S, Se; x = 0–1) was studied by X-ray diffraction and spectroscopic methods, revealing a complete miscibility of CsGaQ₂-mC64 with RbGaQ₂ and KGaSe₂, and a large miscibility gap with KGaS₂. All solid solution members exhibit similar Raman spectra, indicating the covalent Ga-Q bonding character. The similar optical band gaps likewise further contribute to this conclusion. Up to a degree of substitution, these solid solutions undergo a phase transition similar to CsGaQ₂-mC64. The influence of the substitution parameter x on phase transition process was investigated in situ using high-temperature X-ray powder diffraction experiments. Phase-pure solid solutions of the high-temperature polymorphs Cs_1-xM_xGaQ₂-mC16 were obtained up to x_max(K) = 0.1 and x_max(Rb) = 0.3. The crystal structures of these new CsGaQ₂-mC16 analogous high-temperature phases were refined from synchrotron diffraction data by Rietveld-refinement.

As renewed interest in human space-exploration intensifies, a coherent and modernized strategy for mission-design and planning has become increasingly crucial. Biotechnology has emerged as a promising approach to increase mission resilience, flexibility, and efficiency by virtue of its ability to efficiently utilize in situ resources and reclaim resources from waste streams. Since its infancy during the Apollo years, biotechnology, and specifically biomanufacturing, have witnessed significant expansions of scope and scale. Here we outline four primary mission classes, on Luna and Mars, that drive a staged and accretive biomanufacturing strategy. Each class requires a unique approach to integrate biomanufacturing into the existing mission architecture and so faces unique challenges in technology development.These challenges stem directly from the resources available in a given mission class – the degree to which feedstocks are derived from cargo and in situ resources – and the degree to which loop-closure is necessary. We see that as mission duration and distance from Earth increase, the benefits of specialized sustainable biomanufacturing processes increases. Here we present a strategic approach, guided by technoeconomics, to development, testing, and deployment of these technologies serves to nucleate the larger effort of supporting a sustained human presence in space. The processes needed for each scenario spans the technical breadth of synthetic biology to design engineering, from sophisticated genetic tailoring of chassis-organisms to building scalable, automated, easily operable bioreactors and processing systems. As space-related technology development often does, these advancements are likely to have profound implications for the creation of a stable, resilient bioeconomy on Earth.

By employing a variation of the polyamidation method using in situ silylated diamines and acid chlorides, it has been possible to obtain a rod-type polyamide: poly(p-phenylene terephthalamide) (PPTA, a polymer used in the high value-added material Kevlar), with a molecular weight much higher than that obtained with the classical, and industrial, polyamidation method. The optimization of the method has consisted in using, together with the silylating agent, a mixture of pyridine and a high pKa tertiary amine. The research has been complemented by a combination of nuclear magnetic resonance and molecular simulation studies, which have determined that the improvements in molecular weight derive mainly from the formation of silylamide groups in the growing polymer.

The relaxation process of lithium batteries caused by load variation is considered. It is shown that such processes have strong dependence on internal physical and chemical processes and battery technical conditions. Theoretical expressions of the relaxation process caused by a step-like load variation have been obtained for 1^st and 2^nd order equivalent electrical circuits. The experimental investigations show that the obtained models fit the real relaxation processes and the behavior of the identified parameters could be explained by specific features of physical and chemical processes within the lithium battery. It should be noted that the obtained results can be generalized for a different type of electrochemical power source. The proposed approach makes it possible to provide means for electrochemical power source characterization and diagnostic, the main advantages of which are good time localization of measurement procedures and inexpensive apparatus implementation.

A crewed mission to and from Mars may include an exciting array of enabling biotechnologies that leverage inherent mass, power, and volume advantages over traditional abiotic approaches. In this perspective, we articulate the scientific and engineering goals and constraints, along with example systems, that guide the design of a surface biomanufactory. Extending past arguments for exploiting stand-alone elements of biology, we argue for an integrated biomanufacturing plant replete with modules for microbial \textit{in situ} resource utilization, production, and recycling of food, pharmaceuticals, and biomaterials required for sustaining future intrepid astronauts. We also discuss aspirational technology trends in each of these target areas in the context of human and robotic exploration missions in the coming century.

Embryoid bodies (EBs) are multicellular three-dimensional (3D) aggregates generated from induced pluripotent stem cells (iPSCs) in suspension and serve as useful biological sources for many downstream applications. Imaging of live EBs has been hampered mainly due to the inherent limitations of the imaging techniques applied to date. This study aimed to image human iPSC (hiPSC) derived EBs to obtain their 3D volume, determining size, morphology, and cell viability from day 7 to 14 using Light Sheet Fluorescence Microscopy (LSFM). Furthermore, chromosomal stability was assessed using Multicolor fluorescence in situ hybridization (M-FISH) from day 8 to 14. EB volume increased from day 7 to 13 which, decreased at day 14. From day 7 to 11, the EBs mainly appeared spherical and morphed into an ellipsoidal shape by day 13. All EBs showed varied external morphologies and larger cavities at day 14. The EB karyotype was diploid 46XY at day 8 and exhibited a low level of aneuploidy from day 10 to 14. This study shows that an increase in cell death affects the morphology and chromosomal stability in EBs derived from hiPSC. We demonstrate that the combination of LSFM and M-FISH helps characterize EBs that will assist future stem cell therapies.

Breast cancer is the leading cause of cancer deaths worldwide in women. This aggressive tumour can be categorized into two main groups: in situ and infiltrative, with the latter being the most common malignant lesions. The current use of Magnetic Resonance Imaging (MRI) was shown to provide highest sensitivity in the detection and discrimination between benign vs. malignant lesions, when interpreted by expert radiologists. In this article, we present the prototype of a Computer-Aided Detection/Diagnosis (CAD) system that could provide valuable assistance to the radiologist for the discrimination between in situ and infiltrating tumours. The system consists of two main processing levels: 1) Localization of possibly tumoral regions of interest (ROIs) through an iterative procedure based on intensity values (ROI Hunter) followed by a deep-feature extraction and classification method for false-positive rejection; 2) Characterization of the selected ROIs and discrimination between in situ and invasive tumour, consisting of Radiomics feature extraction and classification through a machine-learning algorithm. The CAD system was developed and evaluated using a DCE-MRI image database, containing at least one confirmed mass per image, as diagnosed by an expert radiologist. When evaluating the accuracy of the ROI Hunter procedure with respect to the radiologist-drawn boundaries, sensitivity to mass detection was found to be 75%. The AUC of the ROC curve for discrimination between in situ and infiltrative tumors was 0.70.

Three kinds of hydrophobic groups grafted starches of maleic anhydride grafted starch (MAH-g-starch), lactic acid grafted starch (LA-g-starch), and methyl acrylate grafted starch (MA-g-starch) were prepared by in-situ solid phase polymerization. The results of Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS) were confirmed successful grafting. The grafting ratios of MAH-g-starch, LA-g-starch and MA-g-starch were 6.50%, 12.45%, and 0.57%, respectively. Influenced by the grafting ratio, LA-g-starch had the best hydrophobic properties and the largest molecular weight, and those for MA-g-starch was the worst. The surfaces of grafted starches were covered with graft polymer, with obvious surface roughness and bond degree of MAH-g-starch and LA-g-starch. The crystalline structure of grafted starches showed some damage, with LA-g-starch exhibiting the greatest decrease in crystallinity, and less of a change for MA-g-starch. Overall, the grafting reaction improved thermoplasticity, with LA-g-starch the most improved, followed by MAH-g-starch, and then MA-g-starch.

This paper reports on the production and mechanical properties of Ti6Al4V micro-lattice structures, with strut thickness nearing the single-track width of the laser-based powder bed fusion (LPBF) system used. Besides providing new information on the mechanical properties and manufacturability of such thin-strut lattices, this paper also reports on the in-situ deformation imaging of micro-lattice structures with 6 unit cells in every direction. LPBF lattices are of interest for medical implants, due to the possibility of creating structures with an elastic modulus close to that of the bones and small pore sizes which allow effective osseointegration. In this work four different cubes were produced by laser powder bed fusion and subsequently analyzed using microCT, compression testing and one selected lattice was subjected to in-situ microCT imaging during compression. The in-situ imaging was performed at 4 steps during yielding. The results indicate that mechanical performance (elastic modulus and strength) correlate well with actual density and that this performance is remarkably good, despite the high roughness and irregularity of the struts at this scale. In-situ yielding is visually illustrated.

Aims: To report on the clinico-pathological features of a series of 12 intra-oral mucoepidermoid carcinomas showing exclusive intra-cystic growth. Methods and methods: All mucoepidermoid carcinomas diagnosed in the period 1990-2012 were retrieved, the original histological preparations were reviewed to confirm the diagnosis, and from selected cases, showing exclusive intra-cystic neoplastic component, additional sections were cut at 3 subsequent 200m intervals and stained with Hematoxylin-Eosin, PAS and Alcian Blue, to possibly identify tumor invasion of the adjacent tissues, which could have been overlooked in the original histological preparations. Also, pertinent findings collected from the clinical charts and follow-up data were analyzed. Results: We identified 14 intraoral mucoepidermoid carcinomas treated by conservative surgery and with a minimum follow up of 5 years. The neosplasm were located in the hard palate (9 cases), the soft palate (2), the cheeck (2) and the retromolar trigone (1). In all instances histological examination was revealed the presence of a single cystic space, containing clusters of columnar, intermediate, epidermoid, clear and mucous-producing cells, the latter exhibiting distinct intra-cytoplasmic mucin production, as confirmed by PAS and Alcian Blue stains. The cysts were entirely circumscribed by fibrous connective tissue and no solid areas or infiltrating tumour clusters were detected. Conservative surgical resection was performed in all cases and no recurrences or nodal metastases were observed during the follow up period. Conclusions: Mucoepidermoid carcinomas showing prominent (>20%) intra-cystic proliferation currently are considered low-grade tumours. In addition, we also unveil the possibility that mucoepidermoid carcinomas, at least in their early growth phase, may display an exclusive intra-cystic fashion and might be considered as in situ carcinomas, unable to infiltrate adjacent tissues or metastasize.

The alignment of nanostructures in materials such as lyotropic liquid crystals (LLCs) templated materials has the potential to signicantly improve their performances. However, accurately characterising and quantifying the alignement of such fine structures remains very challenging. In situ small angle X-ray scattering (SAXS) and molecular dynamics were employed for the first time to understand the hexagonal LLC alignment process with magnetic nanoparticles under a magnetic field. The enhanced alignment has been illustrated from the distribution of azimuthal intensity in the samples exposed to magnetic field. Molecular dynamics simulations reveal the relationship between the imposed force of the magenetic nanoparticles under magnetic field and the force transferred to the LLC cylinders which leads to the LLC alignment. The combinational study with experimental measurement and computational simulation will enable the development and control of nanostructures in novel materials for various applications.

In this paper, we present a comprehensive 4D study of the early stage of plastic deformation in a polycrystalline binary AlLi alloy. The entire microstructure is mapped with X-ray diffraction contrast tomography and a set of bulk grains is further studied via X-ray topotomography during mechanical loading. The observed contrast is analyzed with respect to the slip system activation and the evolution of the orientation spread is measured as a function of applied strain. The experimental observations are augmented by the mechanical response predicted by crystal plasticity finite element simulations to analyze the onset of plasticity in details. Simulation results show a general agreement of the individual slip system activation during loading and that comparison with experiments at the length scale of the grains may be used to fine tune the constitutive model parameters.

In this paper the authors describe the architecture of a multidisciplinary data acquisition and visualization platform devoted to the management of coastal environments. The platform integrates heterogeneous data acquisition sub-systems that can be roughly divided in two main categories: remote sensing systems and in-situ sensing systems. Remote sensing solutions include aerial and underwater remote data acquisition while in-situ sensing solutions include the use of RFID tracers, Wireless Sensor Networks and imaging techniques. All the data collected by these subsystems are stored, integrated and fused on a single platform that is also in charge of data visualization. This last task is carried out according to the paradigm of Augmented Virtuality which foresees the augmentation of a virtually reconstructed environment with data collected in the real world. The described solution proposes a novel holistic approach where different disciplines concur, with different data acquisition techniques, to a large scale definition of coastal dynamics, in order to better describe and face the coastal erosion phenomenon. The overall framework has been conceived by the so-called Team COSTE, a joint research team between the Universities of Pisa, Siena and Florence.

In this review, we explore a broad-based view of technologies for supporting human activities on the Moon. Primarily, we assess the state of life support systems technology beginning with physicochemical processes, waste processing, bioregenerative methods, food production systems and the robotics and advanced biological technologies that support the latter. We observe that the Moon possesses in-situ resources but that these resources are of limited value in CELSS – indeed, CELSS technology is most mature in recycling water and oxygen, the two resources that are abundant on the Moon. This places a premium on developing CELSS that recycles other elements that are rarified on the Moon including C and N in particular but also other elements such as P, S and K which might be challenging to extract from local resources. Although we focus on closed loop ecological life support systems, we also consider related technologies that involve the application of biological organisms to bioregenerative medical technologies and bioregenerative approaches to industrial activity on the Moon as potential future developments.

Lemon balm extracts by dry plant material of Melissa officinalis were tested against their efficacy against for different fungal species Alternaria alternata, Fusarium oxysporum, Aspergillus flavus and Beauveria bassiana. The aqueous phase of the extract was evaluated for antioxidant, antifungal and also anti-aflatoxigenic activity. A synergism evaluation was also performed concerning, the small quantity of lemon balm polar essential oil compounds extracted into the infusion and the water soluble compounds in the extract. The experiments were conducted in solid cultures and the growth inhibition was demonstrated by measuring mycelial diameter. Additionally, the effect on conidia production was also demonstrated. Lemon balm was also used for in situ test on Pistachia vera seed against Aspergillus flavus growth and aflatoxin production. Results revealed enhancement of fungal growth by lemon balm extracts however total inhibition of aflatoxins production on Pistachia vera seeds was observed, and both actions were tried to attributed to volatile and water soluble compounds identified based on GC/MS, HPLC/DAD and LC/MS, and the observed antioxidant activity. Volatile and water - soluble compounds found to be in absolute synergism in mycelium growth enhancement and the observed anti-aflatoxigenic activity addressed to the high antioxidant activity observed and synergistic action between the other water soluble phenolic compounds identified in the extract. The findings of this study underline the high biological active potential of lemon balm extracts under various screening test since for the first time full phytochemical analysis of lemon balm extracts.

Bacteria develop various defense mechanisms against stresses, including the bacteriophage infection. The giant phiKZ phage infection induced the appearance of a pseudo-nucleus inside the bacterial cytoplasm. Here, we used FISH, electron tomography and analytical electron microscopy to study the morphology of this unique nucleus-like shell and to demonstrate the distribution of phiKZ and bacterial DNA in infected P. aeruginosa cells. The maturation of the pseudo-nucleus was traced in short intervals for 40 min after infection. This study was accompanied by the identification of phiKZ and bacterial DNA by real-time RCR. We demonstrated that phage DNA that isolated from the cytoplasm during all infection stages were compacted within the pseudo-nucleus in a specific structure. Bacterial DNA was diminished in the course of infection, but did not completely degrade until at least 40 min after phage application. The content of the total phage DNA, on the other hand, increased. EDX analysis confirmed these results and revealed that, during the infection, Sulfur content in the bacterial cytoplasm increased, which suggests the increase of DNA-binding Met-reach proteins synthesis, which could protect bacterial DNA from stress.

Reinvigorated public interest in human space exploration has led to the need to address the science and engineering challenges described by NASA's Space Technology Grand Challenges (STGCs) for expanding the human presence in space. Here we define Space Bioprocess Engineering (SBE) as a multi-disciplinary approach to design, realize, and manage a biologically-driven space mission as it relates to addressing the STGCs for advancing technologies to support the nutritional, medical, and incidental material requirements that will sustain astronauts against the harsh conditions of interplanetary transit and habitation offworld. SBE combines synthetic biology and bioprocess engineering under extreme constraints to enable and sustain a biological presence in space. Here we argue that SBE is a critical strategic area enabling long-term human space exploration; specify the metrics and methods that guide SBE technology life-cycle and development; map an approach by which SBE technologies are matured on offworld testing platforms; and suggest a means to train the next generation spacefaring workforce on the SBE advantages and capabilities. In doing so, we outline aspects of the upcoming technical and policy hurdles to support space biomanufacturing and biotechnology. We outline a perspective marriage between space-based performance metrics and the synthetic biology Design-Build-Test-Learn cycle as they relate to advancing the readiness of SBE technologies. We call for a concerted effort to ensure the timely development of SBE to support long-term crewed missions using mission plans that are currently on the horizon.

(1) Background: Considering highly selected patients with ductal carcinoma in situ (DCIS), active surveillance is a valid alternative to surgery. Our study is aimed at showing the reliability of post-biopsy complete lesion removal, documented by mammogram, as additional criterion to select these patients. (2) Methods: 2173 Vacuum Assisted Breast Biopsies (VABB) documented as DCIS have been reviewed. Surgery has been performed in all cases. We retrospectively collected the reports of post-VABB complete lesion removal and the histological results of the biopsy and surgery. We calculated the rate of upgrade of DCIS identified on VABB upon excision for patients with post-biopsy complete lesion removal and for those showing residual lesion. (3) Results: We observed 2173 cases of DCIS: 408 classified as low grade; 1262 as intermediate grade; 503 as high grade. The overall upgrading rate to invasive carcinoma was 15.2% (330/2173). The upgrade rate was significantly lower (8.2%) when considering patients showing mammographically documented complete removal of the lesion. (4) Conclusion: The absence of mammographically documented residual lesion following VABB is associated to a lower upgrading rate of DCIS to invasive carcinoma on surgical excision and should be considered when deciding the proper management DCIS diagnosis.

A major advance of drug discovery and targeted therapy directed to cancer cells may be achieved by exploitation and immunomodulation of their unique biological property. This re-view summarizes our efforts to develop novel chemo-thermo-immuno-therapy (CTI therapy) by conjugating a melanogenesis substrate, N-propionyl cysteaminylphenol (NPrCAP: amine analog of tyrosine), with magnetite nanoparticles (MNP). In our approach, NPrCAP provides a unique drug delivery system (DDS) because of its selective incorporation into melanoma cells. It also functions as a melanoma-targeted therapeutic drug because of its production of highly reactive free radicals (melanoma-targeted chemotherapy). Moreover, utilization of MNP is a platform to develop thermo-immunotherapy because of heat shock protein (HSP) generation upon exposure to an alternating magnetic field (AMF). The feasibility of our approach was successfully shown in experimental in vivo and in vitro mouse melanoma models and in preliminary clinical trials to a limited number of advanced melanoma patients.

The rapid and extensive loss of biodiversity globally has resulted in an increased urgency to capture and conserve the diversity which is present, including genetic diversity within species. However, for many species there is currently no detailed genetic data available to inform the collection and use of material held in ex situ collections and this can hamper the consideration of genetic issues and reduce the likelihood collection represent the diversity present. Even in the absence of direct genetic data, however, it is possible to consider genetic issues using the existing theoretical and empirical evidence-based and biological, ecological and demographic data for a given species. Here a framework to facilitate the consideration of genetic diversity and genetic issues, even where genetic data is lacking, is presented.

The rapid expansion of transcriptomics from increased affordability of next-generation sequencing (NGS) technologies generates rocketing amounts of gene expression data across biology and medicine, and notably in cancer research. Concomitantly, many bioinformatics tools were developed to streamline gene expression analysis and quantification. We tested the concordance of NGS RNA sequencing (RNA-seq) analysis outcomes between the two predominant programs for reads alignment, HISAT2 and STAR, and the two most popular programs for quantifying gene expression in NGS experiments, edgeR and DESeq2, using RNA-seq data from a series of breast cancer progression specimens, which include histologically confirmed normal, early neoplasia, ductal carcinoma in situ and infiltrating ductal carcinoma samples microdissected from formalin fixed, paraffin embedded (FFPE) breast tissue blocks. We identified significant differences in aligners’ performance: HISAT2 was prone to misalign reads to retrogene genomic loci, STAR generated more precise alignments, especially for early neoplasia samples. edgeR and DESeq2 produced similar lists of differentially expressed genes in stage comparisons, with edgeR producing more conservative, though shorter, lists of genes. Albeit, Gene Ontology (GO) enrichment analysis revealed no skewness in significant GO categories identified among differentially expressed genes by edgeR vs DESeq2. As transcriptome analysis of archived FFPE samples becomes a vanguard of precision medicine, identification and fine-tuning of bioinformatics tools becomes critical for clinical research. Our results indicate that STAR and edgeR are well-suited tools for differential gene expression analysis from FFPE samples.

Biomarker directed selection of targeted anti-neoplastic agents such as immune check-point inhibitors, small molecule inhibitors and monoclonal antibodies form an important aspect of cancer treatment. Immunohistochemistry (IHC) analysis of the tumor tissue is the method of choice to evaluate the presence of these biomarkers. However, a significant barrier to biomarker testing on tissue is the availability of an adequate amount of tissue and need for repetitive sampling due to tumor evolution. Also, tumor tissue testing is not immune to inter- and intra-tumor heterogeneity. We describe the analytical and clinical validation of a Circulating Tumor Cell (CTC) assay to accurately assess the presence of PD-L1 22C3 and PD-L1 28.8, ER, PR and HER2, from patients with solid tumors to guide the choice of suitable targeted therapies. Analytically, the test has high sensitivity, specificity, linearity and precision. Based on a blinded case control study, the clinical sensitivity and specificity for PD-L1 (22C3 and 28.8) was determined to be 90% and 100% respectively. The clinical sensitivity and specificity was 83% and 89% for ER; 80% and 94% for PR; 63% and 89% for HER2 (by ICC); and 100% and 92% for HER2 (by FISH), respectively. The performance characteristics of the test support its suitability and adaptability for routine clinical use.

Big data has revolutionised science and technology leading to the transformation of our societies. High Performance Computing (HPC) provides the necessary computational power for big data analysis using artificial intelligence and methods. Traditionally HPC and big data had focused on different problem domains and had grown into two different ecosystems. Efforts have been underway for the last few years on bringing the best of both paradigms into HPC and big converged architectures. Designing HPC and big data converged systems is a hard task requiring careful placement of data, analytics, and other computational tasks such that the desired performance is achieved with the least amount of resources. Energy efficiency has become the biggest hurdle in the realisation of HPC, big data, and converged systems capable of delivering exascale and beyond performance. Data locality is a key parameter of HPDA system design as moving even a byte costs heavily both in time and energy with an increase in the size of the system. Performance in terms of time and energy are the most important factors for users, particularly energy, due to it being the major hurdle in high performance system design and the increasing focus on green energy systems due to environmental sustainability. Data locality is a broad term that encapsulates different aspects including bringing computations to data, minimizing data movement by efficient exploitation of cache hierarchies, reducing intra- and inter-node communications, locality-aware process and thread mapping, and in-situ and in-transit data analysis. This paper provides an extensive review of the cutting-edge on data locality in HPC, big data, and converged systems. We review the literature on data locality in HPC, big data, and converged environments and discuss challenges, opportunities, and future directions. Subsequently, using the knowledge gained from this extensive review, we propose a system architecture for future HPC and big data converged systems. To the best of our knowledge, there is no such review on data locality in converged HPC and big data systems.

The carbonized elastomer-based composites (CECs) possess a number of attractive features in terms of thermomechanical and electromechanical performance, durability in aggressive media and facile net-shape formability, but their relatively low ductility and strength limit their suitability for structural engineering applications. Prospective applications such as structural elements of MEMS can be envisaged, since smaller principal dimensions reduce the susceptibility of components to residual stress accumulation during carbonization, and to brittle fracture in general. We report the results of operando in-SEM study of micro-deformation and fracture behavior of CECs based on NBR elastomeric matrices filled with carbon and silicon carbide. Nanostructured carbon composite materials were manufactured via compounding of elastomeric substance with carbon and SiC fillers using mixing rolling mill, vulcanization, and low-temperature carbonization. Double Edge Notched Tensile (DENT) specimens of vulcanized and carbonized elastomeric composites were subjected to in situ tensile testing in the chamber of the scanning electron microscope (SEM) Tescan Vega 3 using Deben Microtest 1 kN Tensile Stage. The series of acquired SEM images were analyzed by means of Digital Image Correlation (DIC) using Ncorr open source software to map the spatial distribution of strain. These maps were correlated with Finite Element Modelling (FEM) simulations to refine the values of elastic moduli. Besides, the elastic moduli were derived from unloading curve nanoindentation hardness measurements carried out using NanoScan-4D tester and interpreted using the Oliver-Pharr method. Carbonization causes significant increase of elastic moduli from 0.86 ± 0.07 to 14.12 ± 1.20 GPa for the composite with graphite and carbon black fillers. Nanoindentation measurements yield somewhat lower values, namely, 0.25 ± 0.02 GPa and 9.83 ± 1.10 GPa before and after carbonization respectively. The analysis of fractography images suggests that crack initiation, growth and propagation may occur both at the notch stress concentrator and relatively far from the notch. Possible causes of such response are discussed, namely, (1) residual stresses introduced by processing; (2) shape and size of fillers; and (3) the emanation and accumulation of gases in composites during carbonization.

The European mink (Mustela lutreola) is one of Europe's most endangered species, and it is on the brink of extinction in the Iberian Peninsula. The species' precarious situation requires the application of new ex-situ conservation methodologies that complement the existing ex-situ and in-situ conservation measures. Here, we report for the first time the establishment of a biobank of European mink mesenchymal stem cells (emMSC) and oocytes from specimens found dead in the Iberian Peninsula, either free or in captivity. New emMSC lines were isolated from different tissues: bone marrow (emBM-MSC), oral mucosa (emOM-MSc), dermal skin (emDS-MSC), oviduct (emO-MSc), endometrium (emE-MSC), testicular (emT-MSC), and adipose tissue from two different adipose depots: subcutaneous (emSCA-MSC) and ovarian (emOA-MSC). All the eight emMSC lines showed plastic adhesion, detectable expression of characteristic markers of MSCs and, when cultured under osteogenic and adipogenic conditions, differentiation capacity to these lineages. Additionally, we were able to keep 227 Cumulus-oocyte complexes (COCs) in the biobank, 97 of which are grade I or II. The European mink MSC and oocyte biobank will allow for the conservation of the species' genetic variability, the application of assisted reproduction techniques, and the development of in vitro models for studying the molecular mechanisms of infectious diseases that threaten the species' precarious situation.

Abstract: Predation of eggs and emerging hatchlings of olive ridley turtle (Lepidochelys olivacea) by wild animals and feral dogs are known. They reduce the hatching success rate considerably affecting the conservation management of this vulnerable species. Hatchery management is practised in India to overcome predation. Ant predation is a serious threat to turtle nest protected by ex situ or in situ erected hatchery. This article reports the first direct evidence of turtle eggs predation by Dorylus orientalis Westwood, 1835 commonly called red ants. Native to India, Oriental, Indo Australian and Palearctic regions they are notorious as an agricultural pest. Chlorpyrifos pesticides recommended for their control could become fatal for the developing embryos of turtles if applied near the hatchery. In the turtle nesting site of the west coast of India, D. orientalis has more of an ecological role than as a pest. Natural pesticide such as Neem powder (Azadirachta indica) shows promising results for preventing their infestation.

Background: Cancer has been one of the most critical health problems during the past decades which require serious consideration, especially in developing countries. Methods: 80 parents of the children with different types of cancers were studied via both questionnaire and person-to-person interview after announcing their informed consent. Results: The highest delay in patients' initial referral was due to the following factors: lack of attention or ignoring the first symptoms, delay in referring to the physician, low economic status and even lack of family support for the patient. In addition, visiting several doctors after the initial diagnosis, uncertainty about the first proposed method, and high cost of treatment can be mentioned as the main causes of delays in the start of treatment. Conclusion: Education plays an important role in identifying the signs of cancer. In addition, proper relationship and cooperation between the health system and physicians as well as provision of adequate information to patients could lead to the long-term cooperation of these patients in continuing their treatment.

Current article presents the study of psychological wellbeing of adolescents (n=168, age 15-17) gifted in math, humanities and sports and educated in advanced programs for gifted children. Theoretical framework of this study is eudemonic concept of psychological wellbeing by C. Ryff. Psychological wellbeing is measured with Ryff wellbeing scales in Russian adaptation by L.V. Zhukovskaya and E.G. Troshikhina. The study is aimed at understanding differences in psychological wellbeing of gifted teenagers connected to gender and type of giftedness. The results suggest that general wellbeing score did not differ for adolescents with different types of giftedness or of different genders. Separate components of psychological wellbeing, such as purpose in life and self-acceptance, are influenced by activity connected to the talent. Gender differences are subjected to age-specific trends of personal development in adolescence. Type of giftedness might reinforce these trends.

With Internet of Things (IoT) gaining presence throughout different industries a lot of new technologies have been introduced to support this undertaking. Implications on one such technology, wireless systems allowed for the use of different communication methods to achieve the goal of transferring data reliably, with more cost efficiency and over longer distances. Anywhere from a single house with only a few IoT devices such as a smart light bulb or a smart thermostat connected to the network, all the way to a complex system that can control power grids throughout countries, IoT has been becoming a necessity in everyday lives. This paper presents an overview of the devices, systems and wireless technologies used in different IoT architectures (Healthcare, Vehicular Networks, Mining, Learning, Energy, Smart Cities, Behaviors and Decision Making), their upbringings and challenges to this date and some foreseen in the future.

In an effort to discover an effective and selective antitumour agent, synthesis and anti-cancer potential of 4-(pyridin-4-yl)-6-(thiophen-2-yl)pyrimidin-2(1H)-one (SK-25), which has been reported earlier by us with significant cytotoxicity towards MiaPaCa-2 malignant cells, with an IC₅₀ value of 1.95 μM and was found to instigate apoptosis. In the present study, the antitumour efficacy of SK-25 was investigated on Ehrlich ascites tumour (solid), Sarcoma 180 (solid) tumour and Ehrlich ascites carcinoma. The compound was found to inhibit tumour development by 94.71% in Ehrlich ascites carcinoma (EAC), 59.06% in Ehrlich tumour (ET, solid) and 45.68% in Sarcoma-180 (solid) at 30 mg/kg dose. Additionally, SK-25 was established to be non-toxic at a maximum tolerated dose of 1000 mg/kg in acute oral toxicity in Swiss-albino mice. Computer-based predictions also show that the compounds could have an interesting DMPK profile. The current study provides insight for further investigation of the antitumour potential of the molecule.

In this paper, we discuss major issues of mathematics teaching and learning in Nepal. The issues coming from theories such as social and radical constructivism suggest that teachers are not trained to use such approach in teaching mathematics, and there is a lack of teaching aids and materials and technological tools. The issues related to social aspects are gender issues, language issues, social justice issues, and issues related to the achievement gap. The cultural issues are related to the diversity of language and ethnicity. The issues related to political aspects are equity and access, economic status, pedagogical choice, and professional organizations and unions. The issues related to technology include the technological skills, use of technology, and affordance. Finally, we suggest that all the stakeholders should pay attention to resolving these issues by improving the curriculum, training teachers, resourcing the classroom with locally made and new technological tools.

Whether the different NR-AMPs could ever be utilized as drugs not only against prokaryotic (bacteria) pathogens but eukaryotic (fungal pathogens, and parasitic protists) depends on the side effects. To get experimental experience about the option of applying EPB-produced antimicrobials to pathogens, and parasites of veterinary significance, we present here the results of an in vitro, and an accompanying in vivo study on chicken. In the in vitro study, we tested the cytotoxic potential of the cell-free conditioned culture media (CFCM) of three entomopathogenic bacterium species, - X. budapestensis, DSM16342 (EMA); X. szentirmaii DSM16338 (EMC); Photorhabdus luminescens ssp. akhurstii TT01 - on chicken tissue culture cells, namely, on the Leghorn Male Hepatoma (LMH), [92] cells, (a permanent confluent hepato-carcinoma cell line). Each CFCM proved rather cytotoxic in this test. In the in vivo study, we fed freshly hatched male broiler chickens for 42 days with XENOFOOD [39] which contained autoclaved cultures of EMA, and EMC). These bacteria were grown on standard chicken (starter and grower) [HM3] [u4] feed, and the whole culture was used as a “food supplement”. [HM5]. It had been known that these EPB species cannot grow that is, not viable) atbody temperature (above 33 C).

Physics behind collimated highly directional nature of lasers, and factors that keep the seven coloured waves that form white light together during their journey from Sun to Earth, in the face of the natural disruptive forces, is not fully understood. Energy levels were measured, in terms of alterations in induced current and voltage, in beams from a red laser, white LED light and the Sunlight before and during their disruption by diffusers (frosted glass for the lasers) and diffractors (diffraction grating for the white light) using a photovoltaic solar cell panel attached to a digital multimeter. Results show that disruption of the beams results in release of extra energy named as ‘Latent Light Binding’ Energy’. It is hypothesized that the ‘binding’ energy keeps laser waves firmly bound together both end-on and side-on enabling laser beams to travel long distances in collimated manner. Likewise, the 7 coloured waves that constitute white light are kept together, probably side-on, in their journey from the Sun to the Earth. The observation that diffraction of sunbeam is associated with increased power generation provides a new lead to improve harnessing of solar energy, where, currently, the focus is mainly on improving efficiency of photovoltaic cell.

Leishmaniasis is a vector-borne parasitic infection caused by the bite of female Phlebotomine sandflies. World Health Organization (WHO) estimates 100,000 cases to be reported annually on a global scale, moreover, 13 million people were infected between 2010 and 2015 worldwide. Treatment of leishmaniasis by conventional synthetic compounds is met by challenges pertaining to adverse effects which call for the discovery of newer anti-leishmanial molecules. This study was performed to evaluate the effect and modes of action of a sesquiterpene alcoholic molecule Farnesol on Leishmania major, the causative agent of Zoonotic Cutaneous leishmaniasis. The cytotoxic effect of Farnesol against L. major promastigotes, amastigotes and macrophages was assessed by MTT test and counting. The IC50 on promastigotes by Farnesol on L. major was evaluated by flow cytometry. In the findings, Promastigotes were reduced at 167 µM/mL & the mean numbers of L. major amastigotes in macrophages were significantly decreased in exposure to Farnesol at 172 µM/ml. In addition, Farnesol demonstrated no cytotoxicity on macrophages as the IC50 value was 945 µM/ml; it induced significant apoptosis dose-dependent on L. major promastigotes. In silico protein-ligand binding analyses indicated the effect of Farnesol in perturbation of the ergosterol synthesis pathway of Leishmania with attributes suggesting inhibition of Lanosterol-α-demethylase, the terminal enzyme of ergosterol synthesis machinery. Findings from flow cytometry reveal the role of farnesol in apoptosis-induced killing in promastigotes. Farnesol was effective at very lower concentrations when compared to Paromomycin. Further studies are crucial to evaluate the therapeutic potentials of Farnesol alone and in combination with other conventional drugs using clinical settings.

Oxalate, a compound produced by many edible plants and as a terminal metabolite in the liver of mammals, is a toxin that has a detrimental role to human health. Humans and other mam-mals do produce the enzymatic machinery to degrade oxalate. However, numerous oxa-late-degrading bacteria reside in the mammalian gut and thus provide an important function for hosts. The current review focuses on the environmental factors that influence the efficacy of pro-biotic oxalate-degrading bacteria, relative to oxalate metabolism. We describe the mechanism of oxalate catabolism and its consumption by obligate and facultative anaerobic oxalate-degrading bacteria, in both in vitro and in vivo environments. We also explore the environmental variables that impact oxalate degradation. Studies on single species degrade oxalate have not shown a strong impact on oxalate metabolism especially in high oxalate conditions such as consumption of foods high in oxalate (such as coffee and chocolate for humans or halogeton in animal feed). Considering effective variables which enhance oxalate degradation could be used in application of effective probiotic as a therapeutic tool in individuals with hyperoxaluria. This study indicates probiotics can be considered a good source of naturally occurring oxalate degrading agent in human colon

The World Anti-Doping Agency has prohibited gene doping in the context of progress in gene therapy. There is a risk that the artificial regulation of genes using plasmids could be applied for gene doping. However, no gold standard method to detect this has been established. Here, we aimed to develop a method to detect multiple transgene fragments as proof of gene doping. First, gene delivery model mice as a mimic of gene doping were created by injecting firefly luciferase plasmid with polyethylenimine (PEI) into the abdominal cavity. The results confirmed successful establishment of the model, with sufficient luminescence upon in vivo imaging. Next, multiple transgene fragments in the model were detected in plasma cell-free (cf)DNA, blood-cell-fraction DNA, and stool DNA using the TaqMan-qPCR assay, with the highest levels in plasma cfDNA. Using just a single drop of whole blood from the model, we also attempted long-term detection. The results showed that multiple transgene fragments were detected until 11 days. These findings indicate that the combination of plasma cfDNA or just one drop of whole blood with TaqMan-qPCR assay is feasible to detect plasmid-PEI-based gene doping. Our findings could accelerate the development of methods for detecting gene doping in humans.

Current prenatal genetic evaluation showed a significantly increase in non-invasive screening and the reduction of invasive diagnostic procedures. To evaluate the diagnostic efficacy on detecting common aneuploidies, structural chromosomal rearrangements and pathogenic copy number variants (pCNV), we performed a retrospective analysis on a case series initially analyzed by aneuvysion fluorescence in situ hybridization (FISH) and karyotyping then followed by array comparative genomic hybridization (aCGH). Of the 386 cases retrieved from the past decade, common aneuploidies were detected in 137 cases (35.5%), other chromosomal structural rearrangements were detected in four cases (1%), and pCNV were detected in five cases (1.3%). The relative frequencies for common aneuploidies suggested a under detection of sex chromosome aneuploidies. Approximately 9.5% of cases with common aneuploidies showed a mosaic pattern. Inconsistent results between FISH and karyotyping were noted in cases with pseudo-mosaicism introduced by culture artifact or variable cellular proliferation from cells with mosaic karyotypic complements under in vitro cell culture. Based on findings from this case series, cell-based FISH and karyotyping should be performed to detect common aneuploidies, structural chromosomal abnormalities, and mosaic pattern. DNA-based aCGH and reflex FISH should be performed to detect and confirm genomic imbalances and pCNV. Practice points to ensure the diagnostic accuracy and efficacy were summarized.

Introduction: The combination of Virtual Screening (VS) techniques with in vivo screening in the zebrafish model is currently being used in tandem for drug development in a faster and more efficient way. Areas covered: We review the different virtual screening techniques, the use of zebrafish as a vertebrate model for drug discovery and the synergy that exists between them. Expert opinion: We highlight the advantages of combining virtual and zebrafish larvae screening for drug discovery. On the one hand, VS is a faster and cheaper tool for searching active compounds and possible candidates for therapy than in vivo screening when processing large compound libraries. On the other hand, zebrafish larvae form a vertebrate model which allows in vivo screening of large amounts of the compounds. Importantly physiology and chemical response are mostly conserved between zebrafish and mammals. The availability of the transgenic and mutant zebrafish lines allows an analysis of a specific phenotype upon treatment along with toxicity, off-target effect, side effects, and dosage. Advantages of VS, in vivo whole animal approach screening, and the screening combinations are also reviewed.

Human eye is a specialized organ with complex anatomy and physiology, because it is characterized by different cell types with specific physiological functions. Given the complexity of the eye, ocular tissues are finely organized and orchestrated. In the last few years many in vitro models have been developed, in order to meet the 3Rs principle (Replacement, Reduction and Refinement) for eye toxicity testing. This procedure is highly necessary to ensure that the risks associated with ophthalmic products meet appropriate safety criteria. In vitro preclinical testing is now a well-established practice of significant importance for evaluating the efficacy and safety of cosmetic, pharmaceutical, and nutraceutical products. Along with in vitro testing, also computational procedures, herein described, for evaluating the pharmacological profile of potential ocular drug candidates including their toxicity, are in rapid expansion. In this review the ocular cell types and functionality are described providing an overview about the scientific challenge for the development of three-dimensional in vitro models.

The study was done to investigate the kinetics of first order bioremediation. The effectiveness of remediating soils polluted with raw crude oil and treated crude oil using Aspergillus niger (fungi) and Pseudomonas aeruginosa (bacteria) were investigated. Eight systems of 500g soil sample were polluted with both raw and treated crude oil. Four systems were polluted with 40g treated crude oil while the other remaining four systems were polluted with 40g raw crude oil. Two systems with raw crude and treated crude were left as control (RCC and TCC). Raw crude samples were treated with Aspergillus niger only (RCA) and Pseudomonas aeruginosa (RCP) while treated crude samples were also treated with same (TCA) and (TCP) only. The last two systems were treated with both Pseudomonas aeruginosa and Aspergillus niger (RCAP and TCAP). The first order bioremediation kinetics and biostimulant efficiency for these systems were studied by monitoring Total Petroleum Hydrocarbon (TPH). At the end of the bioremediation period, the results obtained showed that treated crude oil polluted soil generally remediated faster and better than raw crude oil polluted soil. The highest level of bioremediation occurred in systems amended with both Pseudomonas aeruginosa and Aspergillus niger which had about 98% TPH decrease.

The Environmental interactions contributed to the processes of settlement and development of the first settlers at southern Peru 15,000 BC. The determination of this process is based on paleoclimatic studies at southern Peru and ethnoarchaeological evidence. The determination of this process is based on paleoclimatic studies of southern Peru and ethnoarchaeological evidence; establishing as a result of this analysis the hypothesis of environmental interaction and territorial occupation of the first hunter-gatherer populations until their consolidation, dominating the geographical space from Tacna. The Disruptive disaster events and their effects on climate during the Peruvian Paleolithic resulted in the origin of local societies that shaped the Tiawanaku societies of the early horizon at Southern Peru and Northern Chile.

In ethnobotany, the availability hypothesis predicts that plants that are abundant and easily accessible to people are more likely to be medicinal than not. By protecting species diversity away from people, protected areas (PAs) may act as a limiting factor to a sustainable development of traditional knowledge concerning medicinal uses, and in so doing, PAs provide opportunity to prioritize ex-situ conservation for species that are PAs restricted. In this scenario, ex-situ conservation becomes the only chance for people to develop traditional knowledge on plants which otherwise wouldn’t be documented as traditionally useful to people. To test these expectations, we used data collected for almost 20 years of fieldworks on plant medicinal uses and their abundance inside and outside the Kruger National Park (KNP), South Africa. We fitted four different scenarios of structural equation models (SEMs) to the data collected. We found that total plant abundance (abundance outside + inside KNP) is a significant positive predictor of medicinal status, and so is abundance outside KNP, thus supporting the availability hypothesis. However, not only abundance inside KNP is not a direct significant correlate of medicinal status, but also the relationship between both is negative. The lack of predictive power of inside-abundance is most likely because some species are exclusively found inside KNP, and local communities do not have access to them. It also shows that the positive and direct correlation of total abundance with medicinal status is driven by outside-abundance. In addition, the negative relationships between inside abundance and medicinal status implies that abundant plants inside KNP tend to be not-medicinal, further providing evidence that PAs hinder the development of medicinal knowledge. Furthermore, when inside and outside abundance were included simultaneously in a model as two distinct variables, inside abundance was never a direct significant predictor of medicinal status, but it was so, via an indirect path mediated by outside abundance. This suggests that outside abundance is the key variable driving the development of medicinal plant knowledge. Cumulatively, our findings suggest that anything that promotes the growth of PA-restricted plants beyond the natural realized niches of these plants (ex-situ conservation) such as in botanical gardens, private gardens, in agroforestry systems, etc., is to be promoted so that people-plant interactions may continue for the benefits of ethnobotanical knowledge development.

Policies are adopted and implemented to achieve specific goals. In this regard, the Government of Zambia in 2019 adopted the higher education policy with many objectives which include, the expansion of access to higher education; reduction of gender and other forms of inequity in accessing higher education; the improvement of quality of higher education by increasing funding to higher education institutions, construction, and repair of infrastructure in higher and improvement in the provision of learning materials in higher education institutions (HEIs).This paper, therefore, sought to evaluate the higher education policy of 2019. The four criteria were used namely; effectiveness, equity, policy sustainability, and consistency. Other principles such as political and social acceptability of a policy were not used because the policy is already adopted and being implemented. Further, the principle of efficiency was not used because it would have been problematic to gauge the expenditure against the outcomes.The findings have revealed that the policy to some extent has been effective; some of the objectives such as increased access to higher education and reduction of inequality have been partially achieved. It has been established that the number of students pursuing higher education has been increased to 114,049 in 2020 from 91,969 in 2017. Further, in 2021, 48.5% of scholarships in public universities were awarded to female students while 51.5% were awarded to female students. Further, more students are encouraged to pursue science, technology, engineering, and mathematics (STEM); and more women are pursuing studies in STEM-related fields. However, the policy has not helped to achieve the quality of higher education as funding in public HEIs has not improved. Further, infrastructure remains very poor and inadequate; and access to update and relevant learning materials also remains a challenge in HEIs. However, the policy seems to be duplicated by the recent re-launched Technical Education Vocation Entrepreneurship Training (TEVET) national policy.Given the above findings, it has been recommended that the government among other things improve funding and build infrastructure in public HEIs. There is also a need to harmonise the TEVET national policy with the higher education policy.

Malassezia is a lipid-dependent genus of yeasts known for being an important part of the skin mycobiota. These yeasts have been associated in the development of skin disorders and cataloged as a causal agent of systemic infections under specific conditions, making them opportunistic pathogens. Little is known about the host-microbe interaction of Malassezia spp., and unraveling this implies the implementation of infection models. In this mini review we present different models that have been implemented in the fungal infections study with greater attention in Malassezia spp. infections. These models range from in vitro (cell cultures and ex vivo tissue), to in vivo (murine models, rabbits, guinea pigs, insects, nematodes, and amoebas). We additionally highlight the alternative models that reduce the use of mammals as model organisms, which have been gaining importance in the study of fungal host-microbe interactions. This is due to the fact that these systems have shown to have reliable results, which correlate with those obtained from mammalian models. Example of alternative models are Caenorhabditis elegans, Drosophila melanogaster, Tenebrio molitor, and Galleria mellonella. These are invertebrates that have been implemented in the study of Malassezia spp. infections in order to identify differences in virulence between Malassezia species.

Academic entrepreneurship focuses on commercialization of research. Even though it is practiced worldwide for decades, Bangladesh is a newcomer in this segment. In Bangladesh only 2 Universities have Technology Transfer Offices or TTOs which are established with the sole focus of commercialization of researches of the students and the faculty members of the Universities. This article focuses on worldwide practices of technology transfer and academic entrepreneurial activities and also explores the opportunities and challenges of such entrepreneurs through detail investigation of the existing body of knowledge. Apart from exploring the problems and prospect of academic entrepreneurship in Bangladesh, this article also introduces the concept of Full-Service Knowledge Transfer Office (KTO), which existing literatures do not offer. The authors believe that by establishing such KTOs as a self-sustaining body, it is possible for an academic entrepreneur to stimulate, support and sustain their activities in Bangladesh. The concept of full service KTOs can also become models for other nations, specially the developing ones, to establish and nurture a culture of academic entrepreneurship.

Far-red fluorescent reporter genes can be used for tracking cells non-invasively in vivo using fluorescence imaging. Here, we investigate the effectiveness of the far-red fluorescent protein, E2-Crimson (E2C), for tracking mouse embryonic cells (mESCs) in vivo following subcutaneous administration into mice. Using a knock-in strategy, we introduced E2C into the Rosa26 locus of an E14-Bra-GFP mESC line, and after confirming that the E2C had no obvious effect on the phenotype of the mESCs, we injected them into mice and imaged them over 9 days. The results showed that fluorescence intensity was weak, and cells could only be detected when injected at high densities. Furthermore, intensity peaked on day 4 and then started to decrease, despite the fact that tumour volume continued to increase beyond day 4. Histopathological analysis showed that although E2C fluorescence could barely be detected in vivo at day 9, analysis of frozen sections indicated that all mESCs within the tumours continued to express E2C. We hypothesise that the decrease in fluorescence intensity in vivo was probably due to the fact that the mESC tumours became more vascular with time, thus leading to increased absorbance of E2C fluorescence by haemoglobin. We conclude that the E2C reporter has limited use for tracking cells in vivo, at least when introduced as a single copy into the Rosa26 locus.

The purpose of this article is to review a two year long implementation of an electronic health record (EHR) system at the outpatient department of a private hospital in Kathmandu, possibly a first implementation of its kind in Nepal. Procedures: The strategy designed for EHR implementation was based on Professor John P. Kotter's work on successful change management. Main findings: We found that keeping a close watch on the social dynamics affecting adoption decisions among users of the system was crucial for implementing the EHR; this was partly because the project received limited support from an erratically changing hospital leadership and lacked an EHR system suited to the needs of the users. Conclusions: The implementation described in this article is a good lesson on moving from control to drift in information systems implementation, and we hope this work will be useful to health IT professionals working in the space of digital transformation in resource-constrained environments.

The use of nanomaterials has been increasing in recent times, and they are widely used in industries such as cosmetics, drug, food, water treatment and agriculture. The rapid development of new nanomaterials demands a set of approaches to evaluate the potential toxicity and risks related to them. In this regard, nanosafety has been using and adapting already existing methods (toxicological approach), but the unique characteristics of nanomaterials demand new approaches (nanotoxicology) to fully understand the potential toxicity, immunotoxicity and (epi)genotoxicity. Also, new technologies, such as organ-on-chip and sophisticated sensors, are under development and/or adaptation. All the information generated is used to develop new in silico approaches trying to predict the potential effects of newly developed materials. The overall evaluation of how from the production to final disposition chain of nanomaterials is evaluated under Life Cycle Assessment (LCA), which is becoming an important element of nanosafety considering sustainability and environmental impact. In this review we give an overview of all these elements of nanosafety.

Biofouling is the unwanted adsorption of cells, proteins, or intracellular and extracellular bio-molecules that can spontaneously occur on the surface of metal nanocomplexes. It represents a major issue in bioinorganic chemistry because it leads to the creation of a protein corona, which can destabilize a colloidal solution and result in undesired macrophage-driven clearance, consequently causing failed delivery of a targeted drug-cargo. Hyaluronic acid (HA) is a bioactive, natural mucopolysaccharide with excellent antifouling properties, arising from its hydrophilic and polyanionic characteristics in physiological environments which prevent opsonization. In this study, hyaluronate-thiol (HA-SH) (MW 10 kDa) was used to surface-passivate gold nanoparticles (GNPs) synthesized using a citrate reduction method. HA functionalized GNP complexes (HA-GNPs) were characterized using absorption spectroscopy, scanning electron microscopy, zeta potential, and dynamic light scattering. GNP cellular uptake and potential dose-dependent cytotoxic effects due to treatment were evaluated in vitro in HeLa cells using ICP-OES and Trypan blue and MTT assays. Further, we quantified the in vivo biodistribution of intratumorally injected HA functionalized GNPs in Lewis Lung carcinoma (LLC) solid tumors grown on the flank of C57BL/6 mice and compared localization and retention with nascent particles. Our results reveal that HA-GNPs show overall greater peritumoral distribution (**p<0.005, 3 days post-intratumoral injection) than citrate-GNPs with reduced biodistribution in off-target organs. This property represents an advantageous step forward in localized delivery of metal nano-complexes to the infiltrative region of a tumor, which may improve the application of nanomedicine in the diagnosis and treatment of cancer.

To mitigate the COVID-19 infection, many world governments endorsed the cessation of non-essential activities, such as the school attendance. Thereby, forcing the evolution of the teaching model to the virtual classroom. In the present work we show the application of a modified version of the adapted COVID-19 stress scales (ACSS) which also included teaching anxiety and preparedness, and resilience for academic professionals in Mexico, during the unprecedented transformation of the education system undergone in the COVID-19 quarantine. Most of the studied variables: gender, age, academic degree, household occupants, having a disease, teaching level, teaching mode, work hours, resilience, teaching anxiety and preparedness, and fear of being an asymptomatic patient (FOBAP), showed significant statistical correlation between each other (p<0.050) and to the 6 areas of the ACSS (danger, contamination, social economical, xenophobia, traumatic stress and compulsive checking). Our results further showed that the perceived stress and anxiety, fell into the category of absent to mild with only the danger section of the ACSS falling into the moderate category. Finally, resilience generated throughout the quarantine, seems to be a predictor of the adaptation the academic professional has undergone to cope with stress.

Based on the geochemical analysis of the volcanic material from the sediment core AMK-340, central zone of the Reykjanes Ridge, we could detect two ash-bearing sediment units accumulated during the Termination I. They correlate to the Ash Zone I in the North Atlantic Late Quaternary sediments having an age of 12170-12840, within the Younger Dryas cold chronozone, and 13600-14540 years, within and Bølling-Allerød warm chronozone. The ash of the Younger Dryas unit is presented mostly by the mafic and persilicic material originated from the Icelandic volcanoes; Vedde Ash is presented in one sediment sample from this unit. The ash of the Bølling-Allerød unit is presented mostly by the mafic shards which are related to the basalts of the rift zone on the Reykjanes Ridge, having presumably the local origin. A detection of Vedde Ash helped to specify the timing of the previously reconstructed paleoceanographic changes for the Termination I in the point of study: a significant warming in the area could occur as early as 300 years prior to the end of the conventional Younger Dryas cold chronozone.

Microencapsulation of polyherbal formulation (PHF) extract was carried out by freeze drying method, by employing gum arabic (GA), gelatin (GE), and maltodextrin (MD) with their designated different combinations as encapsulating wall materials. Antioxidant components (i.e total phenolic contents (TPC),Total flavonoids contents (TFC), and total condensed contents (TCT)), antioxidant activity (i.e. DPPH, β-carotene & ABTS⁺ assays), moisture contents, water activity (aw), solubility, hygroscopicity, glass transition temperature (T_g), particle size, morphology, in vitro alpha-amylase and alpha-glucosidase inhibition and bioavailability ratios of the powders were investigated. Amongst all encapsulated products, T_B (5% GA and 5% MD) and T_C (10% GA) has proven to be the best treatments with respect to the highest preservation of antioxidant components and their antioxidant potential by DPPH and β-carotene assays and noteworthy for an ABTS⁺ assays, in addition, the aforesaid treatments also demonstrated lower moisture content, aw, particle size and higher solubility, hygroscopicity and glass transition temperature (T_g). All freeze dried samples showed irregular (asymmetrical) microcrystalline structures. Furthermore, T_B and T_C also illustrated the highest in vitro anti-diabetic potential due to great potency for inhibiting alpha-amylase and alpha-glucosidase activities. In the perspective of bioavailability, T_A, T_B and T_C demonstrated the excellent bioavailability ratios (%).Futhermore, the phytochemo-profiling of ethanolic extract of PHF was also revealed to find out the bioactive compounds.

This paper discussed the concept of quality assurance (QA) in higher education and its implications to higher education institutions (HEIs) and the possible challenges. The study evaluated literature concerning QA in Zambia and elsewhere. The findings of the study show that QA is implemented through external and internal mechanisms such as accreditation, registration, institutional auditing, and the use of external examiners, self-evaluation, and peer reviews. The QA implications to HEIs in Zambia are that there is a need for accreditation of academic programmes with the Higher Education Authority (HEA) by HEIs. Further, HEIs should establish QA units to spearhead quality issues, reactive, and introduce the use of external examiners to ensure quality. The challenges identified in the implementation of QA in HEIs include inadequate funding, infrastructure, shortage of qualified academic staff, and lack of standalone QA units in some HEIs. In this regard, it has been recommended among other things, government improve funding in public HEIs, construct infrastructure, HEIs establish QA units, and recruit and retain qualified academic staff to ensure the quality of education.

Information and Communication Technology (ICT) education has attracted attention in recent years. But there are many issues specific to ICT education such as monetary cost, time, environment, teacher education system, motivation, curriculum, and health problems. In this paper, we investigated and considered the issues in ICT education in Japan from 10 viewpoints.

Based on the historical research on the shape of armor in Ming Dynasty, this paper explores the shape characteristics of general armor in Ming Dynasty in China through field research on the general stone statue of Ming Xiaoling Mausoleum in Nanjing. Through Ming Xiaoling Mausoleum general stone carving 3D animation technology restoration project, virtual material heritage practice is carried out. Through the modeling of the general stone statue in Ming Xiaoling Mausoleum by MAYA and Zbrush, UE4 realizes the construction of scenes and the output of interactive effects, so as to explore a mode of application engine animation that can preserve and propagate general stone carving in Ming Xiaoling Mausoleum.

Wounds represents a medical problem that contribute importantly to patient morbidity and to the healthcare costs in several pathologies. In Hidalgo, Mexico, Bacopa procumbens plant has been traditionally used for wound healing care for several generations; in vitro and in vivo experiments were design to evaluate the effects of bioactive compounds obtained from B. procumbens aquoethanolic extract and to determine the key pathways involved in wound regeneration. Bioactive compounds were characterized by HPLC- QTOF-MS and proliferation, migration, adhesion, and differentiation studies were done on NIH/3T3 fibroblasts. Polyphenolic compounds from Bacopa procumbens (PB) regulated proliferation and cell adhesion; enhanced migration reducing the artificial scratch area; and modulated cell differentiation. PB compounds were included in a hydrogel for topical administration on rat excision wound model. Histological, histochemical and mechanical analysis showed that PB treatment accelerates wound closure in at least 48 h; reduce inflammation, increasing cell proliferation and deposition and organization of collagen in earlier times. These changes resulted in the formation of a scar with better tensile properties. Immunohistochemistry and RT-PCR molecular analyses demonstrated that treatment induces: i) overexpression of transforming growth factor beta (TGF-β); and ii) the phosphorylation of Smad 2/3 and ERK1/2, suggesting the central role of some PB to enhance wound healing, modulating TGF-β activation.

The human capital index is a multivariate variable used to measure the assessment of human resource productivity in the future. Human capital has a connection with economic development. Moreover, the study looks to analyses the relationship between Human Capital and Economic Growth indicators such as HCI and GDP. Human Capital relates to the development of individual skills to make them function more profitable for the national economy. The study was aimed at investigating the effect of population, the number of people engaged and the average annual hours worked by engaged persons on the human capital index. The analysis was in SPSS for the findings. Correlation tests were used for analysis. The study revealed that population, the number of people engaged and the average annual hours worked by engaged persons had a significant positive effect on the human capital index.

In contemporary design practices, there is a disconnect between the design techniques used for early-stage design experimentation and performance analysis, and those used for the manufacture and construction. This study addresses the problems in developing an integrated digital design workflow and provides a research framework for integrating environmental performance requirements with robotic manufacturing processes on a construction site. The proposed method enables the user to import a design surface, identify design parameters, set several environmental performance goals, and thereafter simulate and select a robotic building strategy. Based on these inputs, design alternatives are developed and evaluated, considering their robotically simulated constructibility, in terms of their performance criteria. To validate the proposed method, the design is evaluated in an experiment wherein a double-skin facade perforation is generated using the proposed methodology. The results suggest a heuristic feature to improve the simulated robotic constructibility. Moreover, the functionality of the prototype is demonstrated.

In contemporary design practices, there is a disconnect between the design techniques used for early-stage design experimentation and performance analysis, and those used for the manufacture and construction. This study addresses the problems in developing an integrated digital design workflow and provides a research framework for integrating environmental performance requirements with robotic manufacturing processes on a construction site. The proposed method enables the user to import a design surface, identify design parameters, set several environmental performance goals, and thereafter simulate and select a robotic building strategy. Based on these inputs, design alternatives are developed and evaluated, considering their robotically simulated constructibility, in terms of their performance criteria. To validate the proposed method, the design is evaluated in an experiment wherein a double-skin facade perforation is generated using the proposed methodology. Initial results suggest a heuristic feature to improve the simulated robotic constructibility. Moreover, the functionality of the prototype is demonstrated.

In the last decade, unprecedented progress in the development of neural networks influenced dozens of different industries, among which are signal processing for the electroencephalography process (EEG). Electroencephalography, even though it appeared in the first half of the 20th century, to this day didn’t change the physical principles of operation. But the signal processing technique due to the use of neural networks progressed significantly in this area. Evidence for this can serve that for the past 5 years more than 1000 publications on the topic of using machine learning have been published in popular libraries. Many different models of neural networks complicate the process of understanding the real situation in this area. In this manuscript, we provided the most comprehensive overview of research where were used neural networks for EEG signal processing.

Wireless Body Area Networks are composed of sensor nodes that may be implanted in the body or worn on it. A node is composed of a sensing unit, a processor and a radio unit. One of the nodes, the sink, acts as a gateway between the body area network and other networks such as the Internet. We propose a routing protocol that constructs paths between nodes such that the final network topology is a tree rooted at the sink. The protocol's aim is to increase network lifetime and reliability, and to adapt to network conditions dynamically. Moreover, the protocol enables communications between nodes and sink both in the upstream direction, from nodes to sink, and in the downstream direction from sink to nodes. When the network tree is constructed, a node chooses its parent, i.e., next hop to sink, by using one of various criteria. Namely, these are the number of hops between parent and sink, energy level of parent, received signal strength from parent, number of current parent's children, and a fuzzy logic function that combines multiple criteria. Moreover, as time progresses the tree structure may dynamically change to adapt to conditions such as the near-depletion of a routing node's energy. Simulation results show improvements in network lifetime and energy consumption over the older version of the protocol.

The out-of-time-ordered correlation (OTOC) function is an important new probe in quantum field theory which is treated as a significant measure of random quantum correlations. In this paper, with the slogan "Cosmology meets Condensed Matter Physics" we demonstrate a formalism using which for the first time we compute the Cosmological OTOC during the stochastic particle production during inflation and reheating following canonical quantization technique. In this computation, two dynamical time scales are involved, out of them at one time scale the cosmological perturbation variable and for the other the canonically conjugate momentum is defined, which is the strict requirement to define time scale separated quantum operators for OTOC and perfectly consistent with the general definition of OTOC. Most importantly, using the present formalism not only one can study the quantum correlation during stochastic inflation and reheating, but also study quantum correlation for any random events in Cosmology. Next, using the late time exponential decay of cosmological OTOC with respect to the dynamical time scale of our universe which is associated with the canonically conjugate momentum operator in this formalism we study the phenomena of quantum chaos by computing the expression for {\it Lyapunov spectrum}. Further, using the well known Maldacena Shenker Stanford (MSS) bound, on Lyapunov exponent, λ≤2π/β, we propose a lower bound on the equilibrium temperature, T=1/β, at the very late time scale of the universe. On the other hand, with respect to the other time scale with which the perturbation variable is associated, we find decreasing but not exponentially decaying behaviour, which quantifies the random correlation at out-of-equilibrium. Finally, we have studied the classical limit of the OTOC to check the consistency with the large time limiting behaviour.

Nymphaea lotus L. is the medicinal plant that has long been used as food, cosmetic and traditional medicines in Africa and Asia since the ancient time. Its flavonoids and other interesting phytochemical compounds from rhizome, leaf, and the whole flowers have been reported in the previous published researches. However, stamens, which are essential for reproductive functions, may also represent new alternative sources of potential antioxidant flavonoids as investigated in this study. The innovative green chemistry method i.e. ultrasound-assisted extraction (USAE) as well as macroporous resin (MPR) purification procedure were employed in this current research. The optimal ultrasound-assisted extraction condition is 90 % (v/v) aqEtOH with 34.65 khz ultrasonic frequency and 46 minutes of extraction time. Comparing with heat reflux extraction (HRE) conventional method, the significant gain of 1.35 total flavonoids content was obtained using optimized USAE conditions, jumping to 2.80 when this USAE associated with MPR purification. Not only in vitro cell free antioxidant activity of N. lotus stamen extracts, but also in cellulo antioxidant investigation using yeast model showed the same trend to indicate that the best antioxidant flavonoid can be found in USAE coupled with MPR purification. Moreover, the key antioxidant genes expression in yeast model such as SIR2 and SOD2 were also expressed at the highest level in yeast cell treated with the extract from USAE together with MPR purification. Consequently, it can be seen that the USAE combined with MPR purification can help to enhance the flavonoids antioxidant potential of the stamens extract from this medicinal species.

Ochna kibbiensis (Family: Ochnaceae) has been employed in ethnomedicine for the treatment of malaria, and inflammation among others. The aim of this study was to isolate and characterize prophylactic antimalarial agents from the leaves of O. kibbiensis against Plasmodium berghei, in vivo and in silico. The median lethal dose (LD50) of the methanol extract and its fractions (n-hexane, dichloromethane, ethylacetate and n-butanol) was determined according to Lorke’s method while the antimalarial effect of the extract and its fractions was investigated according to the method described by Peters prophylactic test using Chloroquine-sensitive Plasmodium berghei (NK65). All the extract/fractions exhibited LD50 values ≥ 5000 mg/kg with the exception of the n-butanol fraction (1702.94 mg/kg) which indicate that the plant is non-toxic. Dichloromethane fraction exhibited significant (p&lt;0.05) and dose-dependent prophylactic effect with 47.62, 85.12 and 100.0 % prophylaxis (at 500, 250 &amp; 125 mg/kg) while the least effect was observed by the n-butanol fraction with percentage prophylaxis of 64.29 and 76.19, respectively; the standard drug, pyrimethamine had 95.24 % prophylaxis. Based on the result obtained, dichloromethane fraction of O. kibbiensis was subjected to chromatographic purification which led to the isolation of a mixture of two compounds identified as stigmasterol and β-sitosterol by analysis of the NMR spectral data and comparison with existing literature; the compounds exhibited good binding affinities (- 5.129 and - 4.889 kcal/mol) against pfLDH and favorable ADMET profile. In conclusion, the leaf of O. kibbiensis have demonstrated a significant prophylactic antimalarial activity and the two known steroids (stigmasterol and β-sitosterol) isolated from the dichloromethane fraction for the first time.

Chemical exposures from diverse sources merge on a limited number of molecular pathways described as toxicity pathways. Changes in the same set of molecular pathways in different cell and tissue types may generate seemingly unrelated health conditions. Today, no approaches are available to predict in an unbiased way sensitivities of different disease states and their combinations to multichemical exposures across the exposome. We propose an inductive in-silico workflow where sensitivities of genes to chemical exposures are identified based on the overlap of existing genomic datasets, and data on sensitivities of individual genes is further used to sequentially derive predictions on sensitivities of molecular pathways, disease states, and groups of disease states (syndromes). Our analysis predicts that conditions representing the most significant public health problems are among the most sensitive to cumulative chemical exposures. These conditions include six leading types of cancer in the world (prostatic, breast, stomach, lung, colorectal neoplasms, and hepatocellular carcinoma), obesity, type 2 diabetes, non-alcoholic fatty liver disease, autistic disorder, Alzheimer's disease, hypertension, heart failure, brain and myocardial ischemia, and myocardial infarction. Overall, our predictions suggest that environmental risk factors may be underestimated for the most significant public health problems.

Epidermal Growth Factor Receptor (EGFR) tyrosine kinase is a cell surface receptor whose overexpression has been associated with different types of cancers including brain cancer (glioblastoma multiforme). The ability of the extract of Scutellaria baicalensis to inhibit the proliferation of malignant glioma cells have been reported. Thus, in this study we report the identification of 307 bioactive constituents responsible for the anti-glioblastoma multiforme effect from S. baicalensis using in silico studies such as molecular docking, binding free energy calculations, pharmacophore modelling, induced-fit docking, gene enrichment analysis, molecular dynamic simulations and ADMET predictions. A total of 307 chemical constituents of S. baicalensis were screened and the top 10 scoring compounds indicated different binding affinities ranging from -9.010 to -6.427 kcal/mol towards the EGFR tyrosine kinase; Ganhuangenin, 5,7,2',5'-tetrahydroxyflavone, (2R)-2-(2,6-dihydroxyphenyl)-3,4-dihydro-2H-chromene-5,7-diol, and tenaxin I possess higher binding affinities (-9.010 to -8.649 kcal/mol) compared to the standard ligand, erlotinib having -8.539 kcal/mol. The compounds interacted with amino acids of clinical importance such as MET 769, GLU 738, THR 766 via H-bond. The structural features involved in the interaction with the target were mostly two aromatic rings, H-bond donors and acceptors and some hydrophobic interactions which varies between the ligands. Better docking scores in the induced-fit docking further validates the inhibitory potential of the compounds against the flexible protein. All the top-scoring ligands from S. baicalensis had zero Lipinski violation and also obeyed other drug-likeness rules by Ghose, Veber, Egan, and Muegge with the exception of breviscapine. Interestingly, all the compounds are not likely to be hepatotoxic, mutagenic, or cytogenic, making them potentially safe as anti-cancer agents.

Early development in mammals is characterized by the ability of each cell to produce a complete organism plus the extraembryonic, or placental, cells, defined as pluripotency. During subsequent development, pluripotency is lost, and cells begin to differentiate to a particular cell fate. This review summarizes the current knowledge of pluripotency features of bovine embryos cultured in vitro, focusing on the core of pluripotency genes (OCT4, NANOG, SOX2, and CDX2), and main chemical strategies for controlling pluripotent networks during early development. Finally, we will discuss the applicability of manipulating pluripotency during morula to blastocyst transition in cattle species.

The development of CRISPR associated proteins, such as Cas9, has led to increased accessibility and ease of use in genome editing. However, additional tools are needed to quantify and identify successful genome editing events in living animals. We developed a method to rapidly and quantitatively monitor gene editing activity non-invasively in living animals that also facilitates confocal microscopy and nucleotide level analyses at the end of study. Here we report a new CRISPR “footprinting” approach to activate luciferase and fluorescent proteins in mice as a function of gene editing. This system is based on experience with our prior Cre-detector system and is designed for Cas editors able to target LoxP including gRNAs including SaCas9 and ErCas12a [1, 2]. These CRISPRs cut specifically within LoxP, an approach that is a departure from previous gene editing in vivo activity detection techniques that targeted adjacent stop sequences. In this sensor paradigm, CRISPR activity was monitored non-invasively in living Cre reporter mice (FVB.129S6(B6)-Gt(ROSA)26Sortm1(Luc)Kael/J and Gt(ROSA)26Sortm4(ACTB-tdTomato,-EGFP)Luo/J, which will be referred to as LSL and mT/mG throughout the paper) after intramuscular or intravenous hydrodynamic plasmid injections, demonstrating utility in two diverse organ systems. The same genome-editing event was examined at the cellular level in specific tissues by confocal microscopy to determine the identity and frequency of successfully genome-edited cells. Further, SaCas9 induced targeted editing at efficiencies that were comparable to Cre recombinase demonstrating high effective delivery and activity in a whole animal. This work establishes genome editing tools and models to track CRISPR editing in vivo non-invasively and to fingerprint the identity of targeted cells. This approach also enables similar utility for any of the thousands of previously generated LoxP animal models.

There is a growing need for novel in vitro corneal models to replace animal-based ex vivo test in drug permeability studies. In this study we demonstrate a corneal mimetic that models the stromal and epithelial compartments of human cornea. Human corneal epithelial cells (HCE-T) were grown on top of a self-supporting porcine collagen-based hydrogel. Cross sections of the multilayers were characterized by histological staining and immunocytochemistry of zonula occludens-1 protein (ZO-1) and occludin. Furthermore, water content and elastic properties of the synthetized collagen type I-based hydrogels were measured. The apparent permeability coefficient (Papp) values of a representative set of ophthalmic drugs were measured and correlated to rabbit cornea Papp values found in the literature. Multilayered structure of HCE-T cells and expression of ZO-1 and occludin in full thickness of multilayer were observed. The hydrogel-based corneal model exhibited excellent correlation to rabbit corneal permeability (r=0.96), whereas insert-grown HCE-T multilayer was more permeable and the correlation to the rabbit corneal permeability was lower (r=0.89). The hydrogel-based human corneal model predicts the rabbit corneal permeability more reliably in comparison to HCE-T cells grown in inserts. This in vitro human corneal model can be successfully employed for drug permeability tests whilst avoiding ethical issues and reducing costs.

The environmental exposure of human in the daily and occupational activities to plasticizers may adversely affect human health, and thus represents a global issue. The altered expression of MicroRNAs (miRNAs) exerts an important pathogenic role linked also to the exposure to plasticizers. This systematic review summarizes the recent findings showing modified ex-pression of miRNAs in cancer due to plasticizers exposures. Following Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) methodology, we performed a systematic review of the past ten years, focusing on the relationship between plasticizer exposures and expression of miRNAs cancer. Starting by 535 records, 17 articles were included. Results support the hypothesis that exposure to plasticizers cause changes or deregulation of a number of oncogenic miRNAs and showed that plasticizers interaction with several redundant miRNAs, such as let-7f, let-7g, miR-125b, miR-134, miR-146a, miR-22; miR-192, miR-222, miR-26a, miR-26b, miR-27b, miR-296, miR-324, miR-335, miR-122, miR-23b, miR-200, miR-29a and miR-21, might induce deep alterations. These genotoxic and oncogenic responses can eventually lead to abnormal cell signaling pathways and metabolisms that participate in many overlapped cellular processes, and miRNA level changes can be a useful tool for the toxicological assessment of environmental pollutants, including plastic additives and plasticizers

Scientists who hope to obtain a faculty position at a primarily undergraduate institution (PUI) need a distinct skill set and outlook on their future teaching and research career. To obtain a position at a PUI, candidates should 1) design a strategy for obtaining a faculty position that suits each individual’s career goals and aspirations, 2) prepare for the application process, on-campus interview, and contract negotiations, and 3) plan a strategy for the probationary period leading up to tenure and promotion. Given the different types of PUIs, candidates need to consider whether they seek a position that consists of all or mostly all teaching, or both teaching and research. Candidates should educate themselves on the expectations at PUI’s, including current thought, practice, and aspirations for science pedagogy, and gain teaching experience prior to seeking a suitable position. If the candidate’s goal is a position with both teaching and research, it is important to discuss with the current research mentor what projects the candidate can take with them to their new position. The candidate should also consider what types of projects will be successful with undergraduate student researchers in a PUI research environment Importantly, candidates should clearly demonstrate a commitment to diversity and inclusion in their teaching, research, and outreach, and application materials should demonstrate this. On interviews, candidates should be knowledgeable about the mission, values, and resources of the institution and how the candidate will contribute to that mission. Once hired, new faculty should discuss a formal or informal mentoring plan during the probationary period that includes peer evaluations on a regular basis, and maintain communication with the department chair or designated mentor regarding teaching, research, and service activities.

While obesity is recognized as a key global public health issue, there has been no research to date on the perceptions of care for people with this condition held by individuals in positions of organizational power. The aim of this study was therefore to describe the perceptions and experiences of clinical leaders and managers of providing care to inpatients with obesity at a metropolitan public health service. This study applied an interpretative phenomenological analysis (IPA) approach to qualitative research, conducting interviews with 17 participants. Their perceptions of care for inpatients with obesity encompassed both their personal understanding as an individual, and their observations about the organizational, patient and carer perspectives. Three overall themes were identified: 1) The problem of inpatients with obesity, 2) Inpatients with obesity as sources of risk and 3) Personal and professional perceptions of inpatients with obesity. While clinical leaders and managers were aware of potential impact of stigma and weight bias on the care given to this cohort, elements of implicit bias, stereotyping, ‘othering’ and ambivalence were frequently present in the data. Ongoing efforts to improve care for patients with obesity must therefore include efforts to address perceptions and attitudes at all organisational levels of the workforce.