The evaluation of forage crops for adaptability and performance across production systems and environments is one of the main strategies used to improve forage production. To enhance the genetic resource base and identify traits responsible for increased feed potential of Napier grass, forty-five genotypes from EMBRAPA, Brazil, were evaluated for forage biomass yield and feed nutritional quality in a replicated trial under wet and dry season conditions in Ethiopia. The results revealed significant variation in forage yield and feed nutritional qualities among the genotypes and between the wet and dry seasons. Feed fibre components were lower in the dry season while crude protein, in vitro organic matter digestibility and metabolizable energy were higher. Based on the cumulative biomass yield and metabolizable energy yield, top performing genotypes were identified that are candidates for future forage improvement studies. Furthermore, the marker-trait association study identified diagnostic SNP and SilicoDArT markers and potential candidate genes that could differentiate high biomass yielding and high metabolizable energy genotypes in the collection.

Cool-season grasses are the most common forage types in livestock operations and amenities. Several of the cool-season grasses establish mutualistic associations with an endophytic fungus of the Epichloe genus. The grasses and endophytic fungi have evolved over a long period of time to form host-fungus specific relationships that confer protection for the grass against various stressors in exchange for housing and nutrients to the fungus. This review provides an overview of the mechanisms by which Epichloe endophytes and grasses interact, including molecular pathways for secondary metabolite production. It also outlines specific mechanisms by which the endophyte helps protect the plant from various abiotic and biotic stressors. Finally, the review provides information on how Epichloe infection of grass and stress affect the rhizosphere environment of the plant.

Atta capiguara is a grass-cutting ant species frequently found in Cerrado biome. However, little is known about the giant nest architecture of this ant. In this study, we investigated the architecture of three A. capiguara nests from the fragment of cerrado in Botucatu, São Paulo, Brazil. Casts were made of the nests by filling them with cement to permit better visualization of internal structures such as chambers and tunnels. After excavation, the depth and dimensions (length, width, and height) of the chambers were measured. The results showed the typical shape of Atta capiguara nests consisting of mounds of loose soil with unique features resembling a conic section. The fungus chambers were found outside the apparent main part of the nest and were spaced apart and distributed laterally at ground level. The waste chambers were located beneath the largest mound of loose soil. Both the fungus and waste chambers exhibited a sectoral distribution. Our study contributes to a better understanding of the so far unknown nest architecture of the grass-cutting ant A. capiguara.

A series of experiments were conducted to measure and quantify the yield, dry matter content, sugars content and nitrates content of grass intended for ensilement. These experiments took place in the East Midlands of Ireland during the Spring, Summer and Autumn of 2019. A bespoke sensor rig was constructed; included in this rig was a hyperspectral radiometer that measured a broad spectrum of reflected natural light from a circular spot approximately 1.2 metres in area. Grass inside a 50cm square quadrat was manually collected from the centre of the circular spot for ground truth estimation of the grass qualities. Up to 25 spots were recorded and sampled each day. The radiometer readings for each spot were automatically recorded onto a laptop that controlled the sensor rig, and ground truth measurements were made either on site or within 24 hours in a wet chemistry laboratory. The collected data was used to build Partial Least Squares Regression (PLSR) predictive models of grass qualities from the hyperspectral dataset and it was found that substantial relationships exist between the spectral reflectance from the grass and yield (r2 = 0.62), dry matter % (r2 = 0.54), sugar content (r2 = 0.54) and nitrates (r2 = 0.50). This shows that hyperspectral reflectance data contains substantial information about key grass qualities and can form part of a broader holistic data driven approach to provide accurate and rapid predictions to farmers, agronomists and agricultural contractors.

A field experiment to assess the effect of mulch on growth (days to maturity, plant height, leaf length and leaf number) of Garlic (Allium Sativum L.) was conducted in 2015 - 2016 at Addis Ababa University Selale campus, on demonstration field to identify optimum plant growth using different mulches for Garlic tested independently. The experiment was designed using randomized complete block. The analyzed result using ANOVA shows significance difference among the treatments. Plots treated with black polyethylene mulch and grass mulch enhanced maturity by about 114 and 116 days, respectively, while garlic in control showed slightly delayed maturity of 125 days. Maximum plant height (66.5 cm) was recorded in the plants mulched by black polyethylene mulch followed by grass mulch which records 62.3 cm and 52.3 cm, respectively. A highly significant variation (p<0.05) in the leaf length was observed at the different mulch treatments. Significantly maximum leaf number (15.3) was recorded in plants mulched with black polyethylene followed by grass mulch with 14.0 leaf number. Thus, black polyethylene and grass mulch performs better than control treatment in growth parameter evaluation of garlic plants under fiche condition.

We present an Arduino-based automatic robotic system which is used for cutting grass or lawns, mostly healthy grass which needs to cut neatly like in a public park or a private garden. The purpose of this proposed project is to design a programmable automatic pattern design grass cutting robot with solar power which no longer requires time-consuming manual grass-cutting, and that can be operated wirelessly using an Android Smartphone via Bluetooth from a safe distance which is capable of cutting the grass in indeed required shapes and patterns; the cutting blade can also be adjusted to maintain the different length of the grass. The main focus was to design a prototype that can work with a little or no Physical user interaction. The proposed work is accomplished by using an Arduino microcontroller, DC geared Motors, IR obstacle detection sensor, motor shield, relay module, DC battery, solar panel, and Bluetooth module. The grass-cutting robot system can be moved to the location in the lawn remotely where the user wants to cut the grass directly or in desired patterns. The user can press the desired pattern button from the mobile application, and the system will start cutting grass in the similar design such as a circle, spiral, rectangle, and continue pattern. Also, with the assistance of sensors positioned at the front of the vehicle, an automatic barrier detection system is introduced to enhance safety measurements to prevent any risks. IR obstacle detector sensors are used to detect obstacles, if any obstacle is found in front of the robot while traveling; it avoids the barrier by taking a right/right turn or stop automatically appropriately, thereby preventing the collision. Also, the main aim of this project is the formation of a grass cutter that relieves the user from mowing their own grasses and reduces environmental and noise pollution. The proposed system is designed as a lab-scale prototype to experimentally validate the efficiency, accuracy, and affordability of the systems. The experimental results prove that the proposed work has all in one capability (Simple and Pattern based grass cutting with mobile-application, obstacle detection), is very easy to use, and can be easily assembled in a simple hardware circuit. We note that the systems proposed can be implemented on a large scale under real conditions in the future, which will be useful in robotics applications and cutting grass in playing grounds such as cricket, football, and hockey, etc.

The aim of this work was to prepare bioplastics from renewable and biodegradable molecules. In particular, the bioplastics were produced by using as biopolymer source the grass pea (Lathyrus sativus L.) flour, the proteins of which were structurally modified by means of microbial transglutaminase, an enzyme able to catalyze isopeptide bonds between glutamines and lysines. We analyzed, by means of Zeta-potential, the flour suspension with the aim to choose which pH is more stable for the production of film-forming solutions. The bioplastics were produced by casting and they were characterized according to several technological properties. Optical analysis demonstrated that films cast in the presence of the microbial enzyme are more transparent compared to the untreated ones. Moreover, the visualization by Scanning Electron Microscopy demonstrated that the enzyme-modified films possessed a more compact and homogeneous structure. Furthermore, the presence of microbial transglutaminase allowed to obtain film more mechanically resistant. Finally, digestion experiments under physiological conditions performed in order to obtain information useful for applying these novel biomaterials as carriers in the industrial field, indicated that the enzyme-treated coatings might allow the delivery of bioactive molecules in the gastro-intestinal tract.

Rhodes grass (Chloris gayana Kunth) is one of the most important forage grasses used throughout the tropical and subtropical regions of the world. Enhancing the conservation and use of genetic resources requires the development of knowledge and understanding about the existing global diversity of the species. In this study, 104 Rhodes grass accessions, held in trust in the ILRI forage genebank, were characterized using DArTSeq markers to evaluate the genetic diversity and population structure, and to develop representative subsets, of the collection. The genotyping produced 193,988 SNP and 142,522 SilicoDArT markers with an average polymorphic information content of 0.18 and 0.26, respectively. Hierarchical clustering using selected informative markers showed the presence of two and three main clusters using SNP and SilicoDArT markers, respectively, with a cophenetic correction coefficient of 82 %. Bayesian population structure analysis also showed the presence of two main subpopulations using both marker types indicating the existence of significant genetic variation in the collection. A representative subset, containing 21 accessions from diverse origins, was developed using the SNP markers. In general, the results revealed substantial genetic diversity in the Rhodes grass collection and the generated molecular information, together with the developed subset, should help enhance the management, use and improvement of Rhodes grass germplasm in the future.

Due to an increase in the consumption of food, feed, and fuel and to meet global food security needs for the rapidly growing human population, there is a necessity to obtain high-yielding crops that can adapt to future climate changes. Currently, the main feed source used for ruminant livestock production is forage grasses. In temperate climate zones, perennial grasses grown for feed are widely distributed and tend to suffer under unfavorable environmental conditions. Gene editing has been shown to be an effective tool for the development of abiotic stress-resistant plants. The highly versatile CRISPR-Cas system enables increasingly complex modifications in genomes while maintaining precision and low off-target frequency mutations. In this review, we provide an overview of forage grass species that have been subjected to gene editing. We offer a perspective view on the generation of plants resilient to abiotic stresses. Due to the broad factors contributing to these stresses the review focuses on drought, salt, heat, and cold stresses. The application of new genomic techniques (e.g., CRISPR-Cas) allows addressing several challenges caused by climate change and abiotic stresses for developing forage grass cultivars with improved adaptation to the future climatic conditions. Gene editing will contribute towards developing safe and sustainable food systems.

Enteric methane (CH4) emitted by ruminant species is known as one of the main greenhouse gases produced by the agricultural sector. The objective of this study was to evaluate the chemical composition, in vitro gas production, dry matter degradation (DMD), digestibility, CO2 production and CH4 mitigation potential of five tropical tree species with novel forage potential including: Spondias mombin, Acacia pennatula, Parmentiera aculeata, Brosimum alicastrum and Bursera simaruba mixed at two levels of inclusion (15 and 30%) with a tropical grass (Pennisetum purpureum). Crude protein content was similar across treatments (135 g kg-1 DM), while P. purpureum was characterized by a high content of acid detergent fiber (335.9 g kg-1 DM) and B. simaruba by a high concentration of condensed tannins (20 g kg-1 DM). Likewise, A. pennatula and P. aculeata were characterized by a high content of cyanogenic glycosides and alkaloids respectively. Treatments SM30-PP70 (30% S. mombin + 70% P. purpureum) and BA30-PP70 (30% B. alicastrum + 70% P. purpureum) resulted in superior digestibility than P. purpureum, while in the AP30-PP70 (30% A. pennatula + 70% P. purpureum) was lower than the control treatment (P≤0.05). At 24 and 48 h, treatments that contained P. aculeata and B. alicastrum produced higher CH4 ml g-1 DOM than P. purpureum (P≤0.05). The inclusion of B. simaruba at 30% reduced CH4 at 25% compared to P. purpureum. Tropical tree species can improve the nutritional quality of ruminant rations and reduce CH4 emissions to consequently contribute to the development of sustainable ruminant production systems that generate diverse ecosystem services.

The authors introduce the GRASS GIS add-on module g.citation as an initial implementation of a fine-grained software citation concept. The module extends the existing citation capabilities of GRASS GIS, which until now only provide for automated citation of the software project as a whole, authored by the GRASS Development Team, without reference to individual persons. The functionalities of the new module enable individual code citation for each of the over 500 implemented functionalities, including add-on modules. Three different classes of citation output are provided in a variety human- and machine-readable formats. The implications of this reference implementation of scientific software citation for both for the GRASS GIS project and the OSGeo foundation are outlined.

Root research on field grown crops is hindered by the difficulty of estimating root biomass in soil. Root washing, the current standard method is laborious and expensive. Biochemical methods to quantify root biomass in soil, targeting species-specific DNA, have potential as a more efficient assay. We combined an efficient DNA extraction method, designed specifically to extract DNA from soil, with well-established quantitative PCR methods to estimate the root biomass of twenty-two wheat varieties grown in field trials over two seasons. We also developed an assay for estimating root biomass for black-grass, a common weed of wheat cultivation. Two robust qPCR assays were developed to estimate the quantity of plant root DNA in soil samples, one specific to wheat and barley, and a second specific to black-grass. The DNA qPCR method was comparable, with high correlations, with the results of root washing from soil cores taken from winter wheat field trials. The DNA qPCR assay showed both variety and depth as significant factors in the distribution of root biomass in replicated field trials. The results suggest that these DNA qPCR assays are a useful, high throughput tool for investigating the genetic basis of wheat root biomass distribution in field grown crops, and the impact of black-grass root systems on crop production.

Solar3D is an open-source software application designed to interactively calculate solar irradiation at three-dimensional (3D) surfaces in a virtual environment constructed with combinations of 3D city models, digital elevation models (DEMs), digital surface models (DSMs) and feature layers. The GRASS GIS r.sun solar radiation model computes solar irradiation based on two-dimensional (2D) raster maps for given day, latitude, surface and atmospheric conditions. With the increasing availability of 3D city models and demand for solar energy, there is an urgent need for better tools to computes solar radiation directly with 3D city models. Solar3D extends GRASS GIS r.sun from 2D to 3D by feeding the model with input, including surface slope, aspect and time-resolved shading, that is derived directly from the 3D scene using computer graphics techniques. To summarize, Solar3D offers several new features which, as a whole, distinguish itself from existing 3D solar irradiation tools: (1) the ability to consume massive heterogeneous 3D city models, including massive 3D city models such as oblique airborne photogrammetry-based 3D city models (OAP3Ds or integrated meshes); (2) the ability to perform near real-time pointwise calculation for duration from daily to annual; (3) the ability to integrate and interactively explore large-scale heterogeneous geospatial data. (4) the ability to calculate solar irradiation at arbitrary surface positions including at rooftops, facades and the ground. Solar3D is publicly available at https://github.com/jian9695/Solar3D.

Plants harbor a large diversity of endophytic microbes. Meadow fescue (Festuca pratensis) is a cool-season grass known for its symbiotic relationship to the systemic and vertically- via seeds - transmitted fungal endophyte Epichloë uncinata but the effect of the endophyte on the microbial endophyte community and phytohormones is largely unexplored. Here, we sequenced the endophytic bacterial and fungal communities in the leaves and roots, analyzed phytohormone concentrations and plant performance parameters in Epichloë-symbiotic (E+) and Epichloë-free (E-) individuals of two meadow fescue cultivars. The endophytic leaf microbial community differed between leaf and root tissues independent of endophyte symbiosis while the fungal community was different in leaves of Epichloë-symbiotic and Epichloë-free plants in both cultivars. At the same time, endophyte symbiosis decreased salicylic acid and increased auxin concentrations in leaves. Epichloë-symbiotic plants showed a higher biomass, chlorophyll content (SPAD) and higher seed mass at the end of the season. Our results demonstrate that Epichloë-symbiosis alters the leaf fungal microbiome, which coincides with changes in phytohormone concentrations, indicating that Epichloë endophytes affect both, plant immune responses and other fungal endophytes. Whether the effect of Epichloë endophytes on other fungal endophytes is connected to changes in the phytohormone concentrations remains to be elucidated.

We reviewed the current status of a Vulnerable seagrass, Halophila beccarii from the coast of India using the published data from 1977-2020. We found that the seagrass, H. beccarii has a pan India distribution on both east and west coast. It is abundant in the intertidal silty-muddy region on the west coast, while on the east coast it is found on sandy habitats, with few exceptions of muddy habitat. H. beccarii was found to be associated with mangroves or smaller seagrass species within a depth limit of 1.7m. Low salinity and high nitrate levels were observed for the H. beccarii meadows of the west coast due to its association with mangroves. The nutrient levels in H. beccarii meadows of India were comparatively lower than other seagrass meadows. Most of the research on H. beccarii has focoused on its morphometrics (41%), reproductive (33%) and distribution (29%) along the coast of India. Reproductive traits such as flowering and fruiting varying according to the seasons of each coast due to the influence of monsoon and its associated temperature, salinity and nutrient influx. H. beccarii has a great potential of various bioactive compounds, which needs further investigation. Habitat disturbance, anthropogenic pollution and coastal development are the major cause of declining H. beccarii ecosystems in India. Significant loss of the seagrass was observed from the west coast of India due to increased coastal development activities. There is a significant need in quantifying H. beccarii population trends, impact of climate and anthropogenic stressors, economic values of ecosystem services and the role of ecological connectivity for better conservation and management of H. beccarii seascapes across India. There is a need for integration of research outcomes in policy framing for preventing the decline and further loss of this vulnerable seagrass ecosystem.

The energy sector plays an important role in Mexico’s development trajectory. Mexico makes an interesting case study, because it shows how difficult it is to reduce fossil energy dependence despite geographic and climatic conditions that favour renewable energy deployment and use. Resolving path dependencies and the related carbon lock-in are key to Mexico’s sustainable energy transition. This case study aims to identify and discuss how carbon lock-in affects Mexico’s sustainable energy transition. Mexico’s carbon lock-in involves oil and oil-run power plants that are costly to build but relatively inexpensive to operate. This case study identifies potential entry points for transitioning towards sustainable energy in Mexico – resources that can promote the use of clean energy despite carbon lock-in. For example, focusing on electrification – particularly of the carbon-intensive sectors – can help Mexico transit towards sustainable energy despite institutional constraints. Complementing this case study is a teaching guide with recommendations for using Mexico’s energy transition in courses on sustainability. It introduces a “learning activation framework” to identify emerging opportunities that can advance sustainable energy transitions in different cases of carbon lock-in. Finally, the framework also gives students a chance to help dismantle or cope with carbon lock-ins.