For the first time the gain switching properties of an InAs-InP (113)B quantum dot laser are examined theoretically in detail to generate shorter pulses with the application of a Gaussian pulse beam to the laser excited state. The multi population rate equations considering nonlinear gain are solved by the Runge –Kutta method. The numerical results demonstrated that as the homogeneous and the inhomogeneous broadening increase, the differential gain, the gain compression factor and the threshold current of excited state decrease, while threshold current of ground state increases. It was also observed that the contribution of the excited state to gain-switched output pulses depends on not only the value of the inhomogeneous broadening but also the magnitude of the applied current. Finally it was shown that without an optical beam, output pulse has long pulse width due to ground state emission, whereas with an optical beam, narrow pulses having high peak power owing to the excited state emission are generated even though at low currents.

Space instable target simulator (SITS) is a vital actuator for ground verification of on-orbital capture technology, the motion performance of which directly affects simulation credibility. Different delays reduce the stability of SITS and ultimately lead to its divergence. In order to achieve high fidelity simulation, the impact of force measurement delay, discrete control cycle, and simulator response delay on stability is analyzed firstly. Then, the dynamic equation and transfer function identification model of hybrid simulator is constructed, and the necessary and sufficient conditions of its stability and convergence are obtained using the Routh criterion. After that, a switching compensator with variable gain is proposed, the compensation principle diagram of which is build, and its mathematical model including the energy observer and tracking differentiator is also established. Finally, three sets of numerical simulations are conducted to validate the correctness of the stability analysis and effectiveness of proposed compensation method. Simulation results show that all three types of delay can cause SITS to lose stability under critical stable motion state, and the delay in force measurement has the greatest impact, followed by the influence of control cycle. Compared with the force applied to simulated target, velocity and its recovery coefficient of space instable target using fixed gain and linear gain compensation, the proposed compensator has significantly better performance.

We demonstrate a compact 4x4 wavelength selective switch with 50 % fewer electrical pads as compared with our previous generation. We report loss and crosstalk for different paths of the switch. We measure median loss of 5.32 dB and worst case crosstalk of -35 dB. The microring resonators tune by more than one free spectral range, which is an improvement over our previous generation of switches. This switch can support 8 channels at 400 GHz spacing. We conclude that it is not possible to drive both microring resonators with the same voltage and separate control is required because of fabrication variation of the current technology.

In this paper, we review devices used in silicon photonic switches. Devices in switches are divided into active and passive devices. Active devices consist of microring resonator, contra directional couplers, mach zhender switches. Passive devices consist of waveguide crossings and arrayed waveguide gratings. We also list the state of the art in devices in a comparison table.

This paper presents a comparative analysis of the ZVZCS soft switching technique with the ZVS and the ZCS counterpart. The generalization of the voltage-current crossover or the energy loss factor obtained from simulation of the prototype converter shows that the ZVZCS significantly reduces the loss and helps to improve the efficiency of the converter as compared to the ZVS or the ZCS. On the other hand, it is also found that the soft switching range of operation of the ZVS and the ZCS are largely affected by the maximum switch voltage and switch current respectively. In contrary, these factors have a negligible effect on the ZVZCS operation which results in an extended range of soft switching operation. Additionally, a detailed LTPICE simulation is performed for selected ZVS, ZCS and ZVSCS topologies from the recent literature and the switching losses in the main switches of the converters are measured. It is observed that the energy losses in the ZVZCS mode are reduced on average by approximately 26 % at turn on and 20 % at the turn off as compared to the ZVS and the ZCS. Besides, the low standard deviation in this mode confirms a stable low loss profile which renders extended soft switching range. An experimental test is also conducted by building the prototype converter to verify the simulation results. It is found that the switching losses are minimum while the converter is operated in the ZVZCS mode. Besides, the efficiency drop remains consistently low as compared to the ZVS and the ZCS in the whole operating range. Resultantly, the simulation and the experimental results are both found to be consistent.

To solve the problem of smooth switching between car-following model and lane-changing model, the Intelligent Driver Model (IDM) for a single lane was used to study the driver's behavior switching mechanism of normally following, generating intentions to change lanes, creating space and speed gains, and performing lane change. In the case of sufficient lane-changing space and speed gains, the ego vehicle's intention to change lane was considered to solve the switching boundary between car-following behavior and lane-changing behavior, which is also the IDM failure point. In the event that there is no lane-changing gains, the IDM was optimized by incorporating the constraint components of the target lane vehicles in conjunction with the actual motion state of the ego vehicle, and the Stepless Switching Intelligent Driver Model (SSIDM) was constructed. Drivers' natural driving information was collected and scenario mining was performed on structured roads. On the basis of the collected data, an elliptic equation was used to fit the behavior switching boundary, and the two component balance coefficients of the front and rear vehicles on the target lane were identified. According to the test set verification results, the Mean Square Error (MSE) of the SSIDM is 2.172, which is 57.98% less than that of the conventional single-lane IDM. The SSIDM can accomplish stepless switching comparable to driver's behavior between the car-following behavior and the lane-changing behavior, with greater precision than IDM.

The challenge of achieving ultrafast switching of electric polarization in ferroelectric materials remains unsolved, as there is no experimental evidence of such switching to date. In this study, we have developed an enhanced model that describes switching within a two-dimensional space of generalized coordinates. Our findings indicate that stable switching in barium titanate cannot be achieved through a single linearly polarized pulse. When the intensity of the linearly polarized pulse reaches a certain threshold, the sample experiences depolarization, but not stable switching. Our study also reveals that phonon friction plays a minor role in the switching dynamics and provides an estimate of the optimal parameters of the perturbing pulse with the lowest intensity that results in depolarization of an initially depolarized sample.

Weight increase after tonsillectomy has been reported in different studies and systematic reviews. However, the odds of a child being overweight or obese after tonsillectomy were no other than before surgery, according to a few studies. This systematic review aimed to analyze the impact of adenotonsillectomy (TA) on weight gain and to identify subgroups of children and adolescents at risk of obtaining weight gain. A systematic search was performed, including studies published in the last ten years. The PICO framework was used in the selection process, and evidence was as-sessed using the GRADE system. A total of 26 studies were included, and moderate-high level quality ones showed that children who underwent TA could present an increase in BMI z-score. However, this weight gain was significant in individuals younger than six years old and was considered a catch-up growth in subjects who were underweight at baseline. In contrast, in nor-mal-weight or overweight individuals, TA did not lead to overweight per se. At the same time, diet changes and overfeeding seem to not have a leading role in weight gain. In conclusion, TA may not be an independent risk factor for unfavorable weight gain in children; however, individuals who were underweight pre-operatively or younger than six years reported more weight gain after TA than expected.

As a behavior of bilingual individuals and an indispensable part of bilingual speech, code-switching has been investigated by many researchers. However, there are many variables influencing code-switching, and each variable has the potential to be a confounding variable. Among these variables is the gender; however, whether there are significant gender differences and what are the gender differences in code-switching remains unknown for Mandarin Mandarin-English child bilinguals, as previous literature diverse on the existence of gender differences. Therefore, this paper seeks potential code-switching and distribution of code-switching by quantitative analysis of speech data in Singapore Bilingual Corpus. The results indicate that gender differences are significant in the amount of intra code-switching. However, neither considerable gender difference is observed in the amount of inter nor the code-switching related environment.

We consider a stochastic production planning problem with regime switching. There are k≥1 regimes corresponding to different economic cycles. The problem is to minimize the production costs and analyze the problem by the value function approach. Our main contribution is to show that the optimal production is characterized by an exact solution of an elliptic system of partial differential equations. A verification result is given for the determined solution.

Some p53 mutants lose their tumor suppressor activity and acquire new oncogenic functions, known as a gain of function. Recent studies have shown that p53 mutants can exert oncogenic effects through specific miRNAs. We identified the differentially expressed miRNA profiles of the three most frequent p53 mutants (p53R273C, p53R248Q, and p53R175H) in the Saos-2 cell line (null p53) transfected as compared with p53WT transfected cells. The association between these miRNAs and the signaling pathways in which they might participate was performed through the miRPath Software. QRT-PCR was employed to validate the miRNAs profiles. In addition, we explored if the induction of cell migration and invasion by the p53R48Q mutant was dependent on the miR-182-5p. We observed that p53 mutants have an overall negative effect on miRNA expression. Likewise, we found miRNAs differentially expressed associated with regulating Oncogenic signaling pathways. We found overexpression of miR-182-5p, which is associated with processes such as cell migration and invasion. Inhibition of mutant p53R248Q and miR-182-5p increased FOXF2-MTSS1 levels and decreased cell migration and invasion. Our results suggest that p53 mutants increase the expression of miR-182-5p, and this miRNA is also necessary to induce cell migration and invasion by the p53R248Q mutant in a cancer cell model.

Patch antennas are compact, less complex, planar structures and therefore, widely used in small satellite missions for telecommand, data link, and intersatellite link, particularly in S- band and X- band. Improved performance of these patch antennas in terms of gain and compactness will di-rectly affect the communication efficiency of small satellite missions. Especially the coming IoT (Internet of Things) constellations require high gain and efficient antenna arrays. An optimization of single patch antenna elements is an important cornerstone for the missions. Therefore, the ef-fects of various antenna enhancement techniques, such as slotted ground plane, resistor and ca-pacitor integration, parasitic patch elements, are analyzed. These techniques were applied on a rectangular patch antenna with parameter variation to identify the optimal performances with respect to bandwidth, operating frequency, gain, polarization, and power flow. Finally, the techniques were combined to obtain an optimized antenna in terms of gain and compactness. The results were compared to a slotted reference antenna. For the scenario of a 2.4 GHz patch antenna, a gain optimization of 27 % (from 7.09 to 8.14 dBi) or size reduction of 52 % (from 96.04 to 46.2 cm²) could be achieved. Overall, our study revealed an effective way to increase the patch antenna performance, which can directly contribute to more efficient communication links and design of antenna arrays.

We generalize the point information gain (PIG) and derived quantities, i.e., point information gain entropy (PIE) and point information gain entropy density (PIED), for the case of the Rényi entropy and simulate the behavior of PIG for typical distributions. We also use these methods for the analysis of multidimensional datasets. We demonstrate the main properties of PIE/PIED spectra for the real data on the example of several images, and discuss further possible utilizations in other fields of data processing.

BiFeO3/La0.7Sr0.3MnO3 (BFO/LSMO) epitaxial heterostructures were successfully synthesized by pulsed laser deposition on (001)-oriented SrTiO3 single crystal substrates with Au top electrodes. Stable bipolar resistive switching characteristics regulated by ferroelectric polarization reversal was observed in the Au/BFO/LSMO heterostructures. The conduction mechanism was revealed to follow the Schottky emission model, and the Schottky barriers in high resistance and low resistance states were estimated based on temperature-dependent current–voltage curves. Further, the observed memristive behavior was interpreted via the modulation effect on the depletion region width and the Schottky barrier height caused by ferroelectric polarization reversal, combining with the oxygen vacancies migration near the BFO/LSMO interface.

Attribute reduction is a core technique in the rough set domain and an important step in data preprocessing. Researchers have proposed numerous innovative methods to enhance the capability of attribute reduction, such as the emergence of multi-granularity rough set models, which can effectively process distributed and multi-granularity data. However, these innovative methods still have many shortcomings, such as how to deal with complex constraints and how to perform multi-angle effectiveness evaluations. Based on the multi-granularity model, this study proposes a new method of attribute reduction, namely using multi-granularity neighborhood information gain ratio as the measurement criterion. This method combines both supervised and unsupervised perspectives, and by integrating multi-granularity technology with neighborhood rough set theory, constructs a model that can adapt to multi-level data features. This model can select the optimal granularity level or attribute set according to the requirements. Finally, the proposed method is experimented with on 15 UCI datasets against six other attribute reduction algorithms. The experimental outcomes, upon analysis and comparative review, substantiate the reliability and consistency of the attribute reduction approach introduced in this study.

In patients with schizophrenia, metabolic syndrome is associated with cognitive impairments. We carried out a second analysis of data from a longitudinal trial to examine the relationship between weight gain and cognitive function in patients with first-episode schizophrenia (FES) over the first 6-month antipsychotic treatment. Baseline and 6-month endpoint measurements were taken for both cognitive function and body weight. Linear and logistic regression analyses were applied to investigate the bidirectional relationship between weight gain and cognitive function. Clinically relevant weight gain (CRW) was defined as an increase in body weight ex-ceeding 7%. The final analysis included 337 participants. Lower baseline scores in processing speed (OR=0.837, p=0.007), working memory and attention (OR=0.889, p=0.043), and executive function (OR=0.863, p=0.006) domains were significantly associated with CRW at the 6-month endpoint. After adjusting for confounders, CRW was found to be associated with improvement in the Brief Visuospatial Memory Test (p=0.036). The findings suggest that patients with lower baseline cognitive performance experienced more substantial weight gain. Conversely, weight gain was correlated with cognitive improvements, particularly in the domain of visual learning and memory. This suggested a potential bidirectional relationship between weight gain and cog-nitive function in patients with first-episode schizophrenia.

Extensive research has been conducted on printable antenna technologies, believed to be fast-growing due to their significant impact on wireless devices. It is necessary to study the progress of printable antenna technology as they are core devices for wireless technology today. This review work offers a comprehensive account of the previous and recent research achievements based on the principle of printable antenna, and parametric studies of several key design parameters, for future wireless network applications. The systems considered for evaluation include broadband techniques, large Bandwidth, high gain, dual/multi-band, or reconfigurable structure, low-profile, size-reduction, compact, linear, or circular polarization applications. It also highlights the fabrication procedures, and the numerous material characteristics affecting the antenna performance for various wireless applications with design considerations. Fully printed antennas on different substrates and conductive ink were investigated, including polyethylene terephthalate (PET), synthetic paper (Teslin), resin-coated photo paper, and Kapton polyimide substrates, among many others. The findings show that the fully inkjet-printed antenna made fabrication easy, improving the accuracy and conductivity of the printed patterns by concentrating on the inherently difficult problems and opportunities. Inkjet-printed antennas are believed to be the futuristic demand for sustainability and wireless solution in several ways.

Background: Students in the United States gain weight significantly during their first year of university, however limited data are available for Australian students. Methods: This 12-month observational study was conducted to monitor monthly body weight and composition, as well as quarterly eating behaviours, dietary intake, physical activity, sedentary behaviours, and basal metabolic rate changes amongst first-year Australian university students. Participants were first-year university students over 18 years. Results: Twenty-two first-year university students (5 males and 17 females) completed the study. Female students gained weight significantly at two, three, and four-months (+0.9 kg; +1.5 kg; +1.1 kg, p <0.05). Female waist circumference (2.5 cm increase at three-months, p = 0.012), and body fat also increased (+0.9%, p = 0.026 at three-months). Intakes of sugar, saturated fat (both >10% of total energy), and sodium exceeded recommended levels (>2000 mg) at 12-months. Greater sedentary behaviours were observed amongst male students throughout the study (p <0.05). Conclusions: Female students are at risk of unfavourable changes in body composition during the first year of university, while males are at risk of increased sedentary behaviours. High intakes of saturated fat, sugars, and sodium warrant future interventions in such a vulnerable group.

In this research paper, a novel high step up dc-dc converter with a coupled inductor and voltage doubler circuits is proposed. The converter achieves a high step up voltage gain with an appropriate duty ratio and low voltage stress on the power switches. Also, the energy which is stored in the leakage inductor of the coupled inductor can be recycled to the output. The operating principles and the steady state analysis of the proposed converter are discussed in detail. Finally, a prototype circuit of the proposed converter is implemented in the laboratory in order to verify the performance of the proposed converter.

Pathogen fitness landscapes change when transmission cycles establish in non-native environments or spill over into new vectors and hosts. The introduction of Leishmania infantum in the Americas into the Neotropics during European colonization represents a unique case study to investigate mechanisms of ecological adaptation of this important parasite. Defining the evolutionary trajectories that drive L. infantum fitness in this new environment are of great public health importance as they will allow unique insight into pathways of host/pathogen co-evolution and their consequences for region-specific changes in disease manifestation. This review summarizes current knowledge on L. infantum genetic and phenotypic diversity in the Americas and its possible role in the unique epidemiology of VL in the New World. We highlight the importance of appreciating adaptive molecular mechanisms in L. infantum to understand the parasites’ successful establishment on the continent.

Infection with human immunodeficiency virus (HIV) and induced acquired immune deficiency syndrome (AIDS) represent one of the greatest health burdens worldwide. The complex pathophysiological pathways that link highly active antiretroviral therapy (HAART) and HIV infection per se with dyslipidemia make the management of lipid disorders and the subsequent increase in cardiovascular risk essential for the treatment of people living with HIV (PLHIV). Amongst the HAART regimens, darunavir and atazanavir in terms of protease inhibitors, tenofovir disoproxil fumarate, nevirapine or rilpivirine in terms of nucleoside reverse transcriptase inhibitors and non-nucleoside reverse transcriptase inhibitors respectively, and especially integrase inhibitors, have demonstrated the most favorable lipid profile emerging as sustainable options in HAART substitution. To this day, statins remain the cornerstone pharmacotherapy for dyslipidemia in PLHIV, although important drug-drug interactions with different HAART agents should be taken into account upon treatment initiation. For those intolerant or not meeting therapeutic goals, the addition of ezetimibe, PCSK9, bempedoic acid, fibrates or fish oils should also be considered. This review summarizes the current literature on the multifactorial etiology and intricate pathophysiology of hyperlipidemia in PLHIV, with an emphasis on the role of different HAART agents, while also providing valuable insights into potential switching strategies and therapeutic options.

The paper first compares the turn-off performance of two package solutions (3-lead vs 4-lead) in Super-Junction MOSFETs. It is commonly assumed that the better performance (lower switching losses) of the 4-lead is obtained thanks to the decoupling of the power and driving loop. On the contrary, in this work, the experimental results, circuit models, and Kirchhoff laws have shown that the turn-off improvement (lower turn-off losses) obtained by adopting the Kelvin source is due to the lower inductance of the driver loop in comparison with the power loop inductance, instead of the decoupling between these loops.

In bilingual communities, social interactions take place in both single- and mixed-language con-texts. Some of the information shared in multilingual conversations is often required in conse-quent social encounters, like interlocutors’ personal information. In this study we explored whether the autobiographical information provided in a single-language context is better re-membered than in an equivalent mixed-language situation. More than 400 Basque-Spanish bilin-gual (pre-)teenagers were presented with new persons who introduced themselves by either using only Spanish or only Basque, or by inter-sententially mixing both languages. Different memory measures were collected immediately after the initial exposure to the new pieces of information (immediate recall and recognition) and on the day after (delayed recall and recognition). In none of the time points was the information provided in a mixed-language fashion worse remembered than that provided in a strict one-language context. Interestingly, the variability across partici-pants in their sociodemographic and linguistic variables had a negligible impact on the effects. These results are discussed considering their social and educational implications for bilingual communities.

We recently reported that refocusing attention between temporal and spatial tasks becomes more difficult with increasing age, which could impair daily activities such as driving (Callaghan et al., 2017). Here we investigated the extent to which difficulties in refocusing attention extend to naturalistic settings such as simulated driving. 118 participants in five age groups (18-30; 40-49; 50-59; 60-69; 70-91 years) were compared during simulated driving, where they switched from a spatially focal yet temporally complex task (braking due to traffic ahead) to a spatially more distributed task (reading a motorway road sign). Sequential-Task (switching) performance was compared to Single-Task performance (road sign only) to calculate age-related switch-costs. Electroencephalography was recorded in 34 participants (17 in the 18-30 and 17 in the 60+ years groups) to explore age-related changes in the neural oscillatory signatures of refocusing attention while driving. We indeed observed age-related impairments in attentional refocusing, evidenced by increased switch-costs in response times and by deficient modulation of theta and alpha frequencies. Our findings highlight virtual reality (VR) and Neuro-VR as important methodologies for future psychological and gerontological research.

Designing the future energy supply in accordance with ambitious climate change mitigation goals is a challenging issue. Common tools for planning and calculating future investments in renewable and sustainable technologies are often linear energy system models based on cost optimisation. However, input data and the underlying assumptions of future developments are subject to uncertainties that negatively affect the robustness of results. This paper introduces a quadratic programming approach to modifying linear, bottom-up energy system optimisation models in order to take cost uncertainties into account. This is accomplished by implementing specific investment costs as a function of the installed capacity of each technology. In contrast to established approaches like stochastic programming or Monte Carlo Simulation, the computation time of the quadratic programming approach is only slightly higher than that of linear programming. The model’s outcomes were found to show a wider range as well as a more robust allocation of the considered technologies than the linear model equivalent.

Insulated Gate Bipolar Transistor (IGBT) may convey high current and sustain high breakdown voltages; it may provide high power control. In a sense, how IGBT demonstrates the capability of power control was not specifically described, and the equivalent bipolar junction transistors (BJT) activated by an applied bias to the insulated gate is intriguing. As seen in Figure 1, IGBT shows an equivalent circuit structure containing two types of BJT, (NPN-type Bipolar transistor and PNP-type Bipolar transistor), which can be modeled as diode-associated transistor. Apparently, as a bias applies to the controlling gate, the channel beneath the gate oxide gets strongly inversed and turns out to be conductive just like what happens on metal-oxide-silicon field effect transistor (MOSFET), which provides necessary igniting currents to both BJTs and thus causes high current gain flowing through them-selves from the bottom. A proposed and renewed formula provides addressing the above scenario and successfully fitting the measured data that forms the characteristic curves. Some parameters in the proposed formula, which includes size and mobility associated constant, threshold voltage, and Early-Voltage-related lambda for MOSFET, explain and explore the underlying physics. IGBT thus enjoy high input impedance and high current gain due to MOSFET (Insulated Gate) and BJT, respectively. This formula combines both merits of MOSFET and BJT in order to fit the measured data. Indeed, the formula intimately fits IGBT electrical characteristic curves, and thus may be qualified and served as a model. The new model is then advisable for designing power integrated circuit to exactly achieve power saving, power control, and power efficiency.

This paper presents a comprehensive study and the analysis of a topology of a no isolated DC-DC intituled Double Quadratic Boost converter with high static gain. This converter has the main advantage of high static gain and low voltage stress on its switches. The article will first present the theoretical analysis of the converter operating in an open loop. The objective of the work is the mathematical modeling and the control strategy of the converter, as well as the validation through closed-loop experimental results. Besides, we presented the practice test results to demonstrate the operation of the converter, such as the static gain experimental curve, the practice efficiency of the converter, and the control of the output voltage, as well as the capacitor voltage balance control. The authors designed a prototype for 1 kW, with a switching frequency of fs=50kHz, with FPGA-based command and modulation.

The needs for environmental reporting to include positive outcomes considering differences between creation of less harm, benefits and net benefits are explored. To become mainstream, nature-positive development needs positive messaging, measures and metrics to guide, plan and assess urban outcomes. With the accelerating climate crisis and negative messages getting the upper-hand, it’s important to avoid paralysis by bad news. Whilst striving for a nature-positive world, more effort should be on moving beyond zero to qualify and quantify benefits, gains, and regenerative outcomes instead of oscillating around damage and loss sticking points. Life Cycle Benefit Assessment (LCBA) is a method to measure gains in accelerating restoration and climate security. It enables a good news focus as its reach is to quantify and show positive gains beyond the negative and zero loss outcomes. The paper aims to clarify concepts, challenges and quantitative methods then review real-world third-party-certified case studies. Climate security, human wellness and resource viability gains inside safe operating space within planetary boundaries are quantified as positive benefits. Contrary to conventional Life Cycle Impact Assessment (LCIA) LCBA assigns damage and loss as negative debts and benefit as positive gains. It concludes that LCBA offers business and design a new environment assessment tool, with research needed on economic and other outcomes.

In this research paper, a high gain transformer less inverter modeling which is used for the smart grid technology or as the stand alone for home appliances is proposed. The proposed transformer less topology provides a higher voltage gain, low cost, small size and simple control stand alone transformer less inverter for home appliances. The above inverter is modeled by using software which is known as MATLAB/ Simulimk.

Abstract: This study was aimed to determine the influence of the volume fraction of steel fibers and on fracture parameters of concrete. Fifty notched steel fiber reinforced concrete (SFRC) beams and ordinary concrete beams with dimensions of 100mm×100mm×515mm were cast and tested via three-point bending test. Among them, the type of steel fiber is milling type (MF), and the volume fraction of steel fiber added is 0%, 0.5%, 0.5%, 1.5%, 1.5%, 2%, respectively. The effects of the steel fiber volume fraction (VF) on the critical stress intensity factor (KIC), fracture energy (GF), the deflection at failure(δ0), the critical crack mouth opening displacement (CMODC) and the critical crack tip opening displacement (CTODC)were studied. Through the analysis of test phenomena and test data such as load-deflection (P-δ) curve, load-crack mouth opening displacement (P-CMOD) curve and load-crack tip opening displacement (P-CTOD) curve following conclusions are drawn: With the increase of steel fiber volume fraction, some fracture parameters increase gradually and maintain a certain linear growth. The gain ratio of fracture parameters increases significantly, and the gain effect is obvious. Through this law of growth, the experimental statistical formulas of fracture energy and critical stress intensity factor are summarized.

Occasionally, officials of the world’s regulatory agencies embark upon attempts at bringing previously unregulated physical systems under regulation by them. Each such attempt raises an epistemological issue. At issue is whether enough information about the outcomes of the events of the future, given the outcomes of the events of the present, will be in the hands of a would-be regulator for this regulator to regulate effectually. If present, this information is provided by runs of a model of the physical system that is slated for regulation. Ideally, this model makes an argument that draws its conclusion from the evidence presented to it. If so, this argument is of the form of a predictive inference. However, the process by which an argument draws its conclusion from the evidence may go awry. This happens, for example, when the axiom of probability theory called unit measure is falsified by a conclusion that is drawn from the evidence by this argument.A method is derived from first principles for determination of whether unit measure is satisfied or falsified by an argument made by a model, given that this argument may attach unusual meanings to statistical terms. This method is used in a study of whether unit measure is satisfied or falsified by the arguments that are made by a pair of models. Both models are in active use by regulatory agencies around the world. Under neither argument do runs of the model provide an official of a regulatory agency with the information gain aka mutual information that he or she would need to regulate effectually. Under both arguments, attachment of unusual meanings to statistical terms creates the illusion that such an official can and does regulate effectually.

We analyze whether the central banks of a selected sample of emerging economies respond to exchange rate movements. We use economies that are inflation targters and exporters of a limited number of commodities. The latter renders them vulnerable to terms of trade shocks. The sample comprises Brazil, the Czech Republic, India, Indonesia, Russia and South Africa. We also investigate the role played by the terms of trade in explaining their business cycles. We estimate, for each economy separately and using Bayesian techniques, a regime switching open new Keynesian model. This model allows the parameters of the policy rule and the structural shocks to switch between periods of low and high regimes. We perform posterior simulation and find that, when compared to a constant parameters model, the regime switching fits the data better. The results indicate that, in some periods, the different economies respond strongly to exchange rate, while in others, some respond weakly. A terms of trade improvement leads to a currency appreciation. However, this is reversed for those economies that respond strongly to exchange rate movements. This leads to a rise in output and inflation even for economies that do not respond strongly but play a major role in international trade. This is the case of Russia. The terms of trade are found to play a major rule in explaining business cycles in emerging economies. Thus, although these economies follow an inflation targeting framework, they may set their respective policy rate in a manner to take into account exchange rate developments. This insulates themselves against adverse terms of trade shocks.

The effect of ferromagnetic CaMnO3 (CMO) addition on structural, magnetic, dielectric, and ferroelec-tric properties of BiFeO3 are presented. X ray diffraction and Raman investigation allowed the identifi-cation of single pseudo cubic perovskite structure. The magnetic measurement showed that the pre-pared films exhibit a ferromagnetic behavior at low temperature with both coercive field and remnant magnetization increased with increasing CMO content. However, a deterioration of magnetization was observed at room temperature. Ferroelectric study revealed an antiferroelectric like behavior with a pinched P-E hysteresis loop for 5%CMO doping BFO resulting in low remnant polarization and double hysteresis loops. Whereas, high remnant polarization and coercive field with a likely square hysteresis loop are obtained for 10 % CMO addition. Furthermore, a bipolar resistive switching behavior with a threshold voltage of about 1.8V is observed for high doped film that can be linked to the ferroelectric polarization switching.

B lymphocyte development has two DNA recombination processes: V(D)J recombination of the immunoglobulin (Igh) gene variable region and class switching of the Igh constant regions from IgM to IgG, IgA, or IgE. V(D)J recombination is required for successful maturation of B cells from pro-B to pre-B to immature-B and then to mature B cells in the bone marrow. CSR occurs outside of the bone marrow when mature B cells migrate to peripheral lymphoid organs, such as spleen and lymph nodes. Both V(D)J recombination and CSR depend on an “open chromatin” state that makes DNA accessible to specific enzymes, recombination activating gene (RAG), and activation-induced cytidine deaminase (AID). Acetyltransferases GCN5 and PCAF possess redundant functions acetylating histone H3 lysine 9 (H3K9). Here, we generated a mouse model that lacks both GCN5 and PCAF in B cells. We found that double-deficient mice possess low levels of mature B cells in the bone marrow and peripheral organs, an accumulation of pro-B cells in bone marrow, and reduced CSR levels. We conclude that both GCN5 and PCAF are required for B cell development in vivo.

The light response and resistance switching behavior in BaTiO3 (BTO) films are studied for a symmetric Pt/BTO/Pt structure. The resistance of films as a function of time with and without ultraviolet light has been studied. Furthermore, resistance switching behavior was clearly observed based on the application of 365 nm wavelength ultraviolet light. Consequently, the polarities of resistance switching can be controlled by ultraviolet light when the energy is larger than the band excitation energy. It is proposed that the polarity of the resistance switching is dictated by the competition of the ferroelectricity and oxygen vacancy migration. This provides a new mechanism for modulating the state of ferroelectric resistive memory devices.

In-plane electro-optical switching (IPS) is a natural feature of a conventional planar aligned display cell based on deformed helix ferroelectric liquid crystal effect (DHFLC-effect) with sub-wavelength helix pitch if the tilt angle close to 40 degrees.

Past research suggests a continuity between perception and memory, as reflected in influences of orienting of spatial attention by cues presented after a visual target offset (post-target cues) on target perception. Conducting two experiments, we tested and confirmed this claim. Our study revealed an elevated reliance on post-target cues for target detection with diminishing target visibility, leading to better performance in validly versus invalidly cued trials, indicative for contrast gain. We demonstrated this post-target cueing impact on target perception without a postcue response prompt, meaning that our results truly reflected a continuity between perception and memory rather than a task-specific impact of having to memorize the target due to a response prompt. We further showed an influence of attention by the post-target cues with cues presented away from a clearly visible target, meaning that visual interactions at the target location provided no better explanation of our results. Our results generalize prior research with liminal targets and confirm the view of a perception-memory continuum, so that visual target processing is not shielded against visuospatial orienting of attention elicited by events following offset of the visual target.

Abstract: — management of the Continuous Stirred Tank Reactor (CSTR) operation has proven to be a difficult undertaking due to the complex and ever-changing nature of its behavior, which is both nonlinear and dynamic, which is further compounded by its instability. Attempts have been made to use Proportional-Integral-Derivative (PID) controllers for such processes, but the performance is often poor due to the inherent limitations of the controllers. In contrast, heuristic algorithms have been employed to tune the controllers, but these methods can only provide optimal performance for a restricted range of parameter variations. This paper presents a novel approach that involves using a conventional gain scheduling PID controller in combination with a fuzzy gain scheduling (FGS) controller method to calibrate set-point weighted PID controllers for the CSTR process. The paper outlines the design of the controllers and evaluates their performance by subjecting them to varying input signals within the given bandwidth.

Because of the large number of parameters that interact in their function, determining dynamic regime parameters as well as the mode of function of amplifying stages is an extremely complex problem. This paper describes a LabVIEW application for studying the functioning of an ampli-fier in various connections. The user selects the generator's parameters, the type of connection and its parameters, as well as the electric charge characteristics. The application can determine both the stage characteristics and the Bode characteristics. The amplifier's stability zone, as well as its gain and phase, are determined based on these characteristics. An important advantage of this application is that the design of the amplifier stage can be made starting from some param-eters that the amplifier can establish, from which the values of components can be determined. In order to validate the simulation results using the LabVIEW application, a specialized program Multisim was used, as well as experimental measurements using the Electronics Explorer Board. Both Multisim and Electronics Explorer Board can determine Bode characteristics. In both simu-lations and experimental amplifiers, the same schemes with the same transistor was used. The application can be used for educational purposes as well as to design the amplifier's stage to achieve specific parameters.

Background: Changes in body weight are associated with the regulation of DNA methylation (DNAm). In this study, we investigated the associations between maternal gestational weight gain-related DNAm and foetal and neonatal body composition. Methods: Brazilian pregnant women from the Araraquara Cohort Study were followed up during pregnancy, delivery, and after hospital discharge. Women with normal pre-pregnancy BMI were allocated to two groups: adequate gestational weight gain (AGWG, n=45) and excessive gestational weight gain (EGWG, n=30). Foetal and neonatal body composition was evaluated by ultrasound and plethysmography, respectively. DNAm was assessed in maternal blood using Illumina Infinium MethylationEPIC BeadChip arrays. Linear regression models were used to explore the associations between DNAm and foetal and neonatal body composition. Results: Maternal weight, GWG, neonatal weight, and fat mass were higher in the EGWG group. Analysis of DNAm identified 46 differentially methyl-ated positions and 11 differentially methylated regions (DMRs) between the EGWG and AGWG groups. Nine human phenotypes were enriched for these 11 DMRs located in 13 genes (EMILIN1, HOXA5, CPT1B, CLDN9, ZFP57, BRCA1, POU5F1, ANKRD33, HLA-B, RANBP17, ZMYND11, DIP2C, TMEM232), highlighting the terms insulin resistance, and hyperglycaemia. Maternal DNAm was associated with foetal total thigh and arm tissues and subcutaneous thigh and arm fat, as well as with neonatal fat mass percentage and fat mass. Conclusion: The methylation pat-tern in the EGWG group indicated a risk for developing chronic diseases and involvement of ma-ternal DNAm in foetal lean and fat mass and in neonatal fat mass.

Bovine respiratory disease is still a major concern in feedlots and has major economic impact. Another consequence of respiratory infections is the use of antimicrobial molecules to control bacterial pathogens. This can participate to the emergence and shedding of antimicrobial re-sistance that can threaten animal as well as human health. Appeasing pheromones with their capacity to reduce stress and thus their ability to preserve the functions of the immune system have been proposed to reduce the use of antimicrobial substances. In the current report we as-sessed the effect of appeasing pheromone administration on bovine health and performance during the fattening period. Zootechnical and health parameters as well as whole blood immune transcript expressions were measured over weeks in young bulls to determine the effect of the pheromone. We observed a reduction of clinical signs at day 30 in young bulls who received the pheromone and a higher expression of interleukin 8 transcripts in this group than in the control group. Our results are in line with previous reports in bovine and other mammals and ask for further studies to shed more light on the beneficial impact of appeasing pheromones and to de-cipher their exact mechanisms of action.

In some applications of microgrid and distributed generation, it is required to feed islanded or stand-alone loads with high-quality voltage to provide low total harmonic distortion (THD). To fulfil these demands, an LC filter is connected to the output terminals of power electronics converters. A cascaded voltage and current control loop with pulse-width modulation schemes are used to regulate the voltage and current in these systems. However, these strategies have some drawbacks, particularly when multiple-input multiple-output plants (MIMO) are controlled using single-input single-output (SISO) design methods. This methodology usually produces a sluggish transient response and cross-coupling between different control loops. In this paper, a model predictive control (MPC) strategy based on the concept of optimal switching sequences (OSS) is designed to control voltage and current in an LC filter connected to a three-level neutral-point clamped converter. The strategy solves two well-formulated optimisation problems to achieve control of the LC filter variables and the voltages of the DC-link capacitors. Hardware-in-the-Loop (HIL) results are obtained to validate the feasibility of the proposed strategy, using a PLECS-RT HIL platform and a DSP Microlab Box controller. In addition to the good dynamic performance of the proposed OSS-MPC, it is demonstrated by the HIL results that the control algorithm is capable of obtaining low total harmonic distortion (THD) in the output voltage for different conditions.

Domain-specific systems-on-chip (DSSoCs) aim to narrow the gap between general-purpose processors and application-specific designs. CPU clusters enable programmability, while hardware accelerators tailored to the target domain minimize task execution times and power consumption. Traditional operating system (OS) schedulers can diminish the potential of DSSoCs as their execution times can be orders of magnitude larger than the task execution time. To address this problem, we propose a dynamic adaptive scheduling (DAS) framework that combines the advantages of a fast, low-overhead scheduler and a sophisticated, high-performance scheduler with a larger overhead. We present a novel runtime classifier that chooses the better scheduler type as a function of the system workload, leading to improved system performance and energy-delay product (EDP). Experiments with five real-world streaming applications indicate that DAS consistently outperforms fast, low-overhead, and slow, sophisticated schedulers. DAS achieves a 1.29x speedup and 45% lower EDP than the sophisticated scheduler under low data rates and a 1.28x speedup and 37% lower EDP than the fast scheduler when the workload complexity increases. Furthermore, we demonstrate that the superior performance of the DAS framework also applies to hardware platforms, with up to a 48% and 52% reduction in execution time and EDP, respectively.

We present improvements in n-best rescoring of code-switched speech achieved by n-gram augmentation as well as optimised pretraining of long short-term memory (LSTM) language models with larger corpora of out-of-domain monolingual text. In addition, we consider the application of large pretrained transformer-based architectures. Our experimental evaluation is performed on an under-resourced corpus of code-switched speech comprising four bilingual code-switched sub-corpora, each containing a Bantu language (isiZulu, isiXhosa, Sesotho, or Setswana) and English. We find in our experiments that, by combining n-gram augmentation with the optimised pretraining strategy, speech recognition errors are reduced for each individual bilingual pair by 3.51% absolute on average over the four corpora. Importantly, we find that even speech recognition at language boundaries improves by 1.14% even though the additional data is monolingual. Utilising the augmented n-grams for lattice generation, we then contrast these improvements with those achieved after fine-tuning pretrained transformer-based models such as distilled GPT-2 and M-BERT. We find that, even though these language models have not been trained on any of our target languages, they can improve speech recognition performance even in zero-shot settings. After fine-tuning on in-domain data, these large architectures offer further improvements, achieving a 4.45% absolute decrease in overall speech recognition errors and a 3.52% improvement over language boundaries. Finally, a combination of the optimised LSTM and fine-tuned BERT models achieves a further gain of 0.47% absolute on average for three of the four language pairs compared to M-BERT. We conclude that the careful optimisation of the pretraining strategy used for neural network language models can offer worthwhile improvements in speech recognition accuracy even at language switches, and that much larger state-of-the-art architectures such as GPT-2 and M-BERT promise even further gains.

We report a micro-ring resonator with adiabatic bends, non contact waveguide heaters and small bend radius. The ring has the lowest reported off resonance loss and can support 8 wavelength division multiplexed channels at 200 GHz spacing. We measure 0.49 nm/mW tuning efficiency and 0.085 dB off resonance loss.

Phenotypic switching in cancer cells has been found to be present across tumor types. Recent studies on Glioblastoma report a remarkably common architecture of four well-defined phenotypes coexisting within high levels of intra-tumour genetic heterogeneity. Tumours grown from any cell type recapitulate the original phenotypic composition. Similar dynamics have been shown to occur in breast cancer, melanoma and likely across further cancer types. Given the adaptive potential of phenotypic switching (PHS) strategies, understanding how it drives tumour evolution and how to break down these architectures is a major priority. Here we model the ecological dynamics behind PHS. The model is able to reproduce experimental results, and specific conditions for cancer progression and clearance reveal novel features of plastic tumours and its direct consequences on therapy resistance. Following our results we discuss \textit{transition} therapy as a novel scheme to target not only combined cytotoxicity but also the rates of phenotypic switching.

The aim of the study was to find the effect of polyethylene (PE) coatings on the short-circuit current of silicon photovoltaic cells covered with glass, in order to improve the short-circuit current of the cells. Various combinations of PE films (thicknesses ranging from 9 to 23 µm, number of layers ranging from 2 to 6) with glasses (greenhouse, float, optiwhite and acrylic glass) were investigated. The best current gain of 4.05% was achieved for the coating combining a 1.5 mm-thick acrylic glass with 2 × 12 µm-thick PE films. This effect can be related to the formation of an array of micro-wrinkles and micrometer-sized air bubbles with a diameter of 50 to 600 µm in the films, which serve as micro-lenses and enhance light trapping.

This paper presents a comprehensive review that highlights the characteristics of non-isolated step-up converters based on high boost voltage lifting techniques. The paper categorises the high boost techniques: multistage/multilevel, switched capacitor, voltage multiplier, voltage lift, switched inductor, and magnetic coupling. The paper also discusses in detail the advantages and disadvantages for each category such as cost, complexity, power density, reliability and efficiency. The number of passive and active components, voltage gain, voltage stress, switching frequency, efficiency and power rating are also compared. Although the paper considers coupling inductors in the context of the non-isolated converter, the focus of the entire article is on the non-isolated high voltage step-up techniques. The key contribution in this paper is the review of high boosting techniques rather than the DC /DC converters. This allows divergence of new ideas and new power converters that will help provide highly efficient and flexible power converters for several applications where the sending end voltage is very low as photovoltaic systems. In addition, many applications and control techniques of DC/DC converters are summarised in this paper.

Mutations in the “guardian of the genome” TP53 predominate in solid tumors. In addition to loss of tumor suppressor activity, a specific subset of missense mutations confers additional oncogenic properties. These “gain-of-function” (GOF) mutations portend poor prognosis across cancer types regardless of treatment. Our objective in this study was to identify novel therapeutic opportunities to overcome the deleterious effects of GOF TP53 mutants. Using gynecologic cancer cell lines with known TP53 mutational status, we established that treatment with a proteasome inhibitor induced cell death in cells with two recurrent GOF TP53 mutations (R175H and R248Q), and addition of a histone deacetylase inhibitor (HDACi) enhanced this effect. By contrast, p53-null cancer cells were relatively resistant to the combination. Towards understanding the mechanism, we found that proteasome inhibition promotes apoptosis of cells with TP53 GOF mutations, potentially through induction of the unfolded protein response. In line with the reported hyperstabilization of GOF p53 protein, cells treated with HDACi exhibited reduced levels of p53 protein. Together, these data form the basis for future clinical studies examining therapeutic efficacy in a preselected patient population with GOF TP53 mutations.

The use of pain relief during castration and dehorning of calves on commercial beef operations can be limited by constraints associated with the delivery of analgesic agents. As topical anaesthetic (TA) and buccal meloxicam (MEL) are now available in Australia, offering practical analgesic treatments for concurrent castration and dehorning of beef calves, a study was conducted to determine their efficacy in providing pain relief when applied alone or in combination. Weaner calves were randomly allocated to; (1) no castration and dehorning / positive control (CONP); (2) castration and dehorning / negative control (CONN); (3) castration and dehorning with buccal meloxicam (BM); (4) castration and dehorning with topical anaesthetic (TA); and (5) castration and dehorning with buccal meloxicam and topical anaesthetic (BMTA). Weight gain, paddock utilisation, lying activity and behaviour following treatment were measured. CONP and BMTA calves had significantly greater weight gain than CONN calves (P < 0.001). CONN calves spent less time lying compared to BMTA calves on all days (P < 0.001). All dehorned and castrated calves spent more time walking (P = 0.024) and less time eating (P < 0.001) compared to CONP calves. There was a trend for CONP calves to spend the most time standing and CONN calves to spend the least time standing (P = 0.059). There were also trends for the frequency of head turns to be lowest in CONP and BMTA calves (P = 0.098) and tail flicks to be highest in CONN and BM calves (P = 0.061). The findings of this study suggest that TA and MEL can improve welfare and production of calves following surgical castration and amputation dehorning.

A high step-up DC-to-DC converter that integrates an isolated transformer and a switched-clamp capacitor is presented in this study. The voltage stress of the main power switch should be clamped to 1/4 V by using the turn ratio and switched-clamp capacitor of an isolated transformer to achieve a high voltage gain. In addition, a passive clamp circuit is employed reduce voltage stress on the main power switch. The energy of the leakage inductor can be recycled by the clamp capacitor because of the passive clamp circuit, thereby improving the power converter efficiency. The converter consists of one isolated transformer, one main switch, three capacitors, and four diodes. Operating principle and steady-state analyses are also discussed. Finally, a 24-V-input voltage to 200-V-output voltage and a 150 W output power prototype converter are fabricated in the laboratory. The maximum efficiency of the converter is 95.1 at 60 W.

Abstract—Hydraulic switching actuators are high efficiency, fast response, and low cost solutions for hydraulic control systems. One of the challenging problems is throttling losses during valve transitions. Previously the authors proposed a zero-flowrate switching method to reduce throttling energy loss of the switching valve, where a hydraulic resonator is applied to make the flowrates through the lines approaching zero before the valves are switched off. The major challenge of this approach is fast switching valves whose transition times are less than 2 ms. In this paper, an improved zero-flowrate switching method is presented. It utilizes the capacity with independent inlet/outlet ports to regulate flowrates through the lines. Models of capacity applied in a simple line with different pressure signals are developed to explore characteristics of the capacity, based on which a complete actuation system is developed. In the complete model, resistance and inductance are optimized to achieve desired flowrate response. The improved zero-flowrate switching method reduces throttling energy losses by 99.945% compared to a hard switching system. The simulation results demonstrated that the improved zero-flowrate switching method performs as expected in the design condition. A capacity with proper volume is able to regulate flowrates through all the lines to zero, with the help of appropriate resistance and inductance. Compared to previous zero-flowrate switching method, the novel strategy allows slower switching valves applied in hydraulic actuation systems and achieves better efficiency performance. This research paves a new avenue for reducing throttling energy losses and improves system efficiency in hydraulic switching actuators, as well as most of the hydraulic switch-mode circuits.

A three-phase multilevel inverter (MLI) synthesized with 31-levels in the output voltage is used to provide ac supply to a three-phase, squirrel-cage induction motor. The gating angles required for thirty power switches in MLI are optimized by both Genetic Algorithm (GA) and Gray Wolf Op-timization (GWO). In the optimization technique, the optimal angles are determined by solving the trigonometric equations from the Fourier analysis for targeting minimum total harmonic distortion (THD) at the MLI output. Simulation model and experimental prototype are developed for performance analysis and validation. The results obtained demonstrate that the MLI is effec-tively able to produce 31-levels of three-phase ac output voltages with THD not exceeding 5% when loaded with a resistive load and a three-phase induction motor. The voltages and currents are measured and recorded for different loads and operating conditions, including the amount of energy consumed by the loads, as well as frequency analysis, which shows the absence of most of the triple harmonics that have a negative impact on the efficiency of the inverter.

This paper investigates the dynamic tail dependence risk between BRICS economies and world energy market in the context of the COVID-19 financial crisis of 2020, to determine optimal investment decisions based on risk metrics. For this purpose, the study employs a combination of novel statistical techniques ranging from Markov Switching, GARCH and Vine copula. Using a dataset consisting of daily stock and world crude oil prices; we find high probability of transition between lower and higher volatility regimes. Furthermore, our results based on the C-Vine copula confirm the existence of two types of tail dependence: - symmetric tail dependence between South Africa and China; South Africa and Russia; and lower tail dependence between South Africa and India; South Africa and Brazil; South Africa and Oil. For the purpose of diversification in these markets, we formulate an asset allocation problem using C-vine copula-based returns and optimize it using Particle Swarm algorithm with a rebalancing strategy. The results show an inverse relationship between the risk contribution and asset allocation of South Africa and oil market supporting the existence of lower tail dependence between them. This suggests that when South African stocks are in distress, investors tend to shift their holdings in oil market. Similar results are found between China and oil. In the upper tail, South African asset allocation is found to have an inverse relationship with that of Brazil, Russia and India suggesting that these three markets might be good investment destinations when things are not good in South Africa and vice-versa.

This paper proposes a novel micro-grid structure, which can operate fully-autonomously with inherent seamless switching. It can operate independently in both grid-connected and islanded mode as a self-governed entity without relying on the utility grid. An AC/DC/AC converter is employed as the interface between the micro-grid and the utility grid, which enables the two entities to have different voltages in grid-connected mode. Seamless switching between operation modes can be achieved naturally. The micro-grid is regulated to exchange predefined amount of power with the utility grid in grid-connected mode. This will benefit the power dispatching algorithm of the power system. The predefined power is estimated based on power forecasting of local renewable generations and loads with consideration of the Sate of Charge (SOC) of the battery, and is updated and broadcasted every certain period. A small scale AC micro-grid with a rotating generator, battery storage and solar arrays etc. is built for investigation. Matlab/Simulink results are provided to validate the robustness and flexibility of proposed micro-grid and its operation strategy.

A novel reinforcement learning deep deterministic policy gradient agent-based sliding mode control (DDPG-SMC) approach is proposed to suppress the chattering phenomenon in the attitude control for quadrotors, in the presence of external disturbances. First, the attitude dynamics model of the studied quadrotor is derived and the attitude control problem is described by formulas. Second, a sliding mode controller including its sliding mode surface and reaching law is selected for the nonlinear dynamic system, and the stability of the designed SMC system is supported by Lyapunov stability theorem. Third, a reinforcement learning (RL) agent based on deep deterministic policy gradient (DDPG) is trained to adjust the switching control gain adaptively. During the training process, the input signals of agent are the actual and desired attitude angles, and the output action is the time-varying control gain. Finally, the above trained agent is applied to the SMC as a parameter regulator, to implement the adaptive adjustment of the switching control gain related to reaching law, and the simulation results verify the robustness and effectiveness of the proposed DDPG-SMC method.

Fat has a high energy density and excessive fatness has been recognized as a problem for egg production and the welfare of chickens. The identification of a genetic polymorphism controlling fat deposition would be helpful to select against excessive fatness in the laying hen. This study aimed to estimate genomic heritability and identify the genetic architecture of abdominal fat deposition in a population of chickens from a Dongxiang blue-shelled local breed crossbred with the White Leghorn. A genome-wide association study wase conducted on abdominal fat percentage, egg production and body weights using a sample of 1534 hens genotyped with a 600K Chicken Genotyping Array. The analysis yielded a heritability estimate of 0.19 ± 0.04 for abdominal fat percentage, 0.56 ± 0.04 for body weight at 72 weeks, 0.11 ± 0.03 for egg production and 0.24 ± 0.04 for body weight gain. The genetic correlation of abdominal fat percentage with egg production between 60 and 72 weeks of age was 0.35 ± 0.18. This implies a potential trade-off between these two traits related to allocation of resource. Strong positive genetic correlations were found between fat deposition and weight traits. A promising locus close to COL12A1 on chromosome 3, associated with abdominal fat percent, was found in the present study. The other region located around HTR2A on chromosome 1, where allele substitution was predicted to be associated with body weight gain, accounted for 2.9% of phenotypic variance. Another region located on chromosome 1, but close to SOX5, was associated with egg production. These results may be used to influence the balanced genetic selection for laying hens.

Intended for the high voltage gain and wide-range operation of DC/DC converters for photovoltaic energy storage systems, a topology for four-phase interleaved DC/DC converters for photovoltaic power generation is proposed. This topology increases output voltage for output in series, and reduces the input current ripple by paralleling the input. Compared with traditional boost converter topology, the proposed topology reduces the output current and output voltage ripple, reduces the stress of the switching device, and reduces the withstanding voltage of the output capacitor under the premise of ensuring the boost ratio. Experimental results show that the maximum efficiency of the converter reaches 95.37%. Compared with traditional boost converters, the proposed converter offers obvious advantages in efficiency under the conditions that the output voltage and load are variable.

This study aimed to evaluate the impact of selected pregnancy pathologies statistically depending on overweight/obesity and excessive maternal weight gain during pregnancy on women who gave birth in the years 2013–2015 at the Second Department of Gynecology and Obstetrics at the University Hospital in Bratislava, Slovakia. In a retrospective study, we analyzed data gathered from the sample, which consisted of 7,122 women. Our results indicate a positive statistical dependency of the groups of women with overweight and obesity and gestational hypertension (adjusted odds ratio [AOR]=15.3; 95% CI 9.0−25.8 for obesity), preeclampsia (AOR=3.4; 95% CI 1.9−6.0 for overweight and AOR=13.2; 95% CI 7.7−22.5 for obesity), and gestational diabetes mellitus (AOR=1.9; 95% CI 1.2−2.9 for overweight and AOR=2.4; 95% CI 1.4−4.0 for obesity). A higher incidence of pregnancies terminated by cesarean section was observed in the group of obese women. Gestational weight gain above the IOM (the Institute of Medicine) recommendations was associated with a higher risk of pregnancy terminated by C-section (AOR=1.2; 95% CI 1.0−1.3), gestational hypertension (AOR=1.7; 95% CI 1.0−2.7), and infant macrosomia (AOR=1.7; 95% CI 1.3−2.1). Overweight and obesity during pregnancy significantly contribute to the development of pregnancy pathologies and increased incidence of cesarean section. Systematic efforts to reduce weight before pregnancy through pre-pregnancy dietary counseling, regular physical activity, and healthy lifestyle should be the primary goal.

The ubiquitous problem of electrical energy waste is driven by human error, in which people regularly forget to turn off appliances when they leave a room, resulting in excessive consumption. The paper presents an energy-efficient TRIZ-inspired (EETRIZ) paradigm to automate consumer electronic devices in order to address this problem. Employing motion detection at entry and exit points, the system discerns room occupancy, effectively managing electrical appliances like lamps, fans, and air conditioners. The integration of theory of inventive problem solving (TRIZ) principles guides the ideation and design of an efficient switching mechanism. The system demonstrates that it is flexible by controlling multiple electronic consumer devices simultaneously. This paradigm can be used in a variety of environments, such as homes, offices, schools, and universities, and its goal is to reduce excessive energy use that results from human negligence. With an emphasis on economic viability and environmental impact, the proposed EETRIZ paradigm not only offers enhanced energy efficiency but also lays the groundwork for long-term sustainability practices, aligning with global efforts towards greener and smarter energy management. The proposed EETRIZ is implemented on C platform with support of MPLAB, Nuvoton 8051 Serie MCU Programming, GMPLibrary (GMP-5.1.1) and, Miracl Library. The proposed EETRIZ outperforms current state-of-the-art methods in terms of energy efficiency, cost-effectiveness, precision, and user-friendliness, according to hardware testing.

Plasmonic nanocomposites have the ability to enhance light-matter interaction due to the 1 plasmonic effects leading to promising potential applications. In this paper, we theoretically study the 2 group index of the silver nanoparticle-gold nanoparticle-quantum dot plasmonic hybrid system in 3 the optical region of the electromagnetic spectrum using the density matrix approach. The quantum 4 dot is considered to be a three-level atomic system of a lambda configuration, interacting with strong 5 control and weak probe fields. We find that the plasmonic hybrid system exhibits at near resonance a 6 strong switching between slow and fast light, which can be controlled by the inclination angle of the 7 gold nanoparticle and the size of the metals nanoparticles, in addition to the strength and detuning 8 of the control field. Thus, the silver nanoparticle-gold nanoparticle-quantum dot could potentially be 9 used in optoelectronic devices.10

This work investigates the sliding mode control (SMC) problem for a class of uncertain switched systems subject to asynchronous switching and an assigned finite time constraint. Two important issues are how to ensure the reachability of state trajectories within the assigned time and the input-to-output finite-time stability (IO-FTS) of the closed-loop switched systems during the whole phase under asynchronous switching. To achieve these objectives, an asynchronous sliding mode controller with adjustable parameters is constructed to drive the state trajectories onto the sliding surface during the assigned finite-time interval. By means of the partitioning strategy, sufficient conditions for the IO-FTS of the closed-loop switched are derived during the whole phase [0,T] using the multiple Lyapunov function (MLF) approach. Additionally, the asynchronous characteristics are detailedly investigated while analyzing the reachability of a specified sliding surface. Finally, an illustrative example is given to illustrate the effectiveness of the proposed method.

Rhenium Disulfide (ReS2) has evolved as a novel 2D transition-metal dichalcogenide (TMD) material which has promising applications in optoelectronics and photonics because of its distinctive anisotropic attributes. In this review, we emphasize on formulating saturable absorbers (SAs) based on ReS2 to produce Q-switched and mode-locked pulsed lasers of diverse operation wavelengths like 1 μm, 1.5 μm, 2 μm, and 3 μm. We outline ReS2 synthesis techniques and integration platforms concerning solid-state and fiber-type lasers. We discuss the laser performance based on SAs attributes. Lastly, we draw conclusions and outlook by recommending additional improvements for SA devices so as to advance the domain of ultrafast photonic technology.

Individual users' payment behaviors have changed. The diffusion of mobile devices makes people suitable for proximity mobile payment (PMP) services without the need for traditional payment. Existing mobile payment literature mainly focuses on users' adoption and continuous usage behavior, nevertheless, switching behavior on payment received little attention, especially focusing on why users switch from traditional payment to PMP. Thus, the objective of the current research is to investigate factors influencing users’ traditional payment - PMP switching to comprehend how these factors shape users’ switching intentions. We developed a traditional payment - PMP transition model based on the push-pull-mooring framework derived from migration theory. This research adopted a structural equation modeling analysis on 311 valid data. The findings indicate that a push factor drives users away from traditional payment in terms of dissatisfaction. The pull factors, including perceived substitutability and perceived usefulness, attract users to PMP. Furthermore, in terms of perceived technical compatibility, a positive mooring factor facilitates users' switching to PMP. The negative mooring factor, in terms of perceived risk, hinder users' switching intention. However, another pull factor - perceived ease of use, failed to influence switching intention significantly. This study found some distinctions between mobile payment switching and mobile payment adoption. These findings provide pivotal insights for mobile payment service providers.

The novel coronavirus SARS-CoV-2 likely emerged from a wildlife source with transmission to humans followed by rapid geographic spread throughout the globe and severe impacts on both human health and the global economy. Since the onset of the pandemic, there have been many instances of human-to-animal transmission involving companion, farmed and zoo animals, and limited evidence for spread into free-living wildlife. The establishment of reservoirs of infection in wild animals would create significant challenges to infection control in humans and could pose a threat to the welfare and conservation status of wildlife. We discuss the potential for exposure, onward transmission and persistence of SARS-CoV-2 in an initial selection of wild mammals (bats, canids, felids, mustelids, great apes, rodents and cervids). Dynamic risk assessment and targeted surveillance are important tools for the early detection of infection in wildlife, and here we describe a framework for collating and synthesising emerging information to inform targeted surveillance for SARS-CoV-2 in wildlife. Surveillance efforts should be integrated with information from public and veterinary health initiatives to provide insights into the potential role of wild mammals in the epidemiology of SARS-CoV-2.

This paper presents the design of a high frequency zero voltage switching (ZVS) full-bridge converter with a phase-shifted driving signal for photovoltaic applications. The resonant power converter can provide high-power capacity under high-frequency operation. The proposed power converter can also reduce the size of the transformer under the same power rating. The high-frequency transformer was developed by using the resonant and switching frequencies of the power converter to reduce the switching loss and to improve the system efficiency. Phase-shifted modulation was selected to drive the switches of a full-bridge power converter based on the switching loss minimization method. The desired output voltage was controlled using a closed-loop controller under a loop gain stability margin. The simulation results showed that the output voltage can be controlled to the desired constant when the input voltage changes from 30 VDC to 60 VDC. The desired output voltage of power converter is constant at 400 VDC. The power converter can transfer the DC supply to a 220 VAC household via grid-connected inverter. Therefore, the proposed study showed the effectiveness of the phase-shift ZVS full-bridge power converter with high-frequency transformer. This power converter can control the operation of the desired voltage system and has a small sizing of power converter system, low switching loss, and high system efficiency.

Dynamic hedging has been adopted by many insurance companies to mitigate the financial risks associated with variable annuity guarantees. In order to simulate the performance of dynamic hedging for variable annuity products, insurance companies rely on nested stochastic projections, which is highly computationally intensive and often prohibitive for large variable annuity portfolios. Metamodeling techniques have recently been proposed to address the computational issues. However, it is difficult for researchers to obtain real datasets from insurance companies to test metamodeling techniques and publish the results in academic journals. In this paper, we create synthetic datasets that can be used for the purpose of addressing the computational issues associated with the nested stochastic valuation of large variable annuity portfolios. The runtime used to create these synthetic datasets would be about 3 years if a single CPU were used. These datasets are readily available to researchers and practitioners so that they can focus on testing metamodeling techniques.

With the development of higher voltage power grid, the high and low voltage parallel loops are emerging, which lead to energy losses, even threaten the security and stability of power system. The multi-infeed HVDC configurations widely appearing in AC/DC interconnected power system make this situation even worse. Aimed at energy saving and system security, a decision optimization method for power grid operating condition with high and low voltage parallel loops is proposed in this paper. Firstly, considering hub substation distribution and power grid structure, parallel loop opening schemes are generated with GN algorithm. Then, candidate opening schemes are preliminarily selected from all these generated schemes based on a filtering index. Finally, with the influence on power system security, stability and operation economy in consideration, an evaluation model for candidate opening schemes is founded based on analytic hierarchy process (AHP). And a fuzzy evaluation algorithm is used to find the optimal scheme. Simulation results of New England 39-bus system and an actual power system validate the effectiveness and superiority of this proposed method.

Background: Obesity and its attendant conditions have become major health problems worldwide and is currently ranked as the fifth most common leading cause of death globally. Complex environmental and genetic factors are the cause of the current obesity epidemic. Diet, lifestyle, chemical exposures, and other confounding factors are difficult to manage in humans. The mice model is helpful in researching genetics BW gain because genetic and environmental risk factors can be controlled in mice. Studies in mouse strains with various genetic backgrounds and established genetic structures provide unparalleled opportunities to find and analyze trait-related genomic loci. In this study, we used the Collaborative Cross (CC), a large panel of recombinant inbred mouse strains, to present a predictive study using CC mice SMAD4 knockout profiles to understand and effectively identify predisposition to body weight gain. Materials and Methods: Male C57Bl / 6J Smad4+/- mice were mated with female mice from 10 different CC lines to create F1 mice (Smad4+/- x CC). Body weight (BW) was measured weekly until week 16, then monthly until the end (week 48). The heritability H2 of the assessed traits was estimated and presented. Comparative analysis of various machine learning algorithms for predicting the BW changes and genotype of mice was conducted. Results and conclusions: Our data showed that the body weight records of F1 mice with different CC lines differed between wildtype and mutant Smad4 mice during the experiment. Genetic background affects weight gain and some lines gained more weight in the presence of Smad4 knockout, while others gained less, but in general, the mutation caused overweight mice, except for a few lines. In both control and mutant groups, female %BW had a higher heritability H2 value than males. Additionally, both sexes with wildtype genotypes showed higher heritability values than the mutant group. Logistic Regression provides the most accurate mouse genotype predictions using machine learning. We plan to validate the proposed method on more CC lines and mice per line to expand machine learning for BW prediction.

Brugada syndrome (BrS) is an inherited disease characterized by right precordial ST-segment elevation on electrocardiograms (ECGs), and a high risk of life-threatening ventricular arrhyth-mia and sudden cardiac death. In BrS patients, except for SCN5A, mutations in other responsible genes are poorly elucidated. We identified a new missense mutation, c.1189C>T (p.R397C), in the KCNH2 gene in asymptomatic male proband with diagnosed BrS. We performed patch-clamp analysis on I(Kr) reconstituted with this KCNH2 mutation in Chinese hamster ovary cells and compared the phenotype with the wild type. We found that the R397C mutation increased the I(Kr) density. In silico modeling demonstrated that this missense mutation potentially leads to the shortening of action potential in the heart.

This paper studies the trajectory tracking control of an autonomous underwater vehicle (AUV) based on a stochastic uncertain nonlinear system. We investigate the time-varying gain adaptive control method looking for possible approaches to alleviate the heavy computational burden. Under nonlinear growth, conditions satisfy polynomial growth conditions. These two problems are resolved the fast response time and good path tracking, respectively. Novel adaptive algorithms are developed exploiting the dynamic properties of the AUV motion. By appropriately turning the original controller design problems into parameters choosing problems and then solving them in a functional time-varying observer technical theorem. In order to deal with the station error of system converges to arbitrarily small domains with stochastic uncertain disturbance. A coordinate transformation is proposed for all system states to meet boundedness. We show that the convergence of the AUV trajectory errors can be guaranteed by the proposed contraction constraints in the stability analysis, closed-loop stability is proved, and the system is asymptotically probabilistic in the global scope. They are taking advantage of the guaranteed stability. Extensive simulation studies on the AUV model demonstrate the effectiveness and robustness of the proposed approach. A real-time time-varying gain constructive control strategy is further developed for the Hardware-in-the-loop simulation; the controller design results are imported into the AUV actuator model to verify the effectiveness of the controller design.

This experiment examined the effect of feeding graded levels of Momordica foetida leaf (MFL) as a substitute for Noug Seed Cake (NSC) on feed intake, digestibility, growth performance, and economic efficiency. Forty-two yearling lambs (16.1±0.6 kg) were randomly allotted to six dietary treatment groups for 90 days feeding trial followed by ten days digestibility trial. Treatments were T1(Control) = adlibitum PG (Pennisetum glaucifolium) + 449.3gm WB (Wheat Bran), T2 = 449.3gm WB + 100% MFL; T3 = 449.3gm WB + 75% MFL + 25% NSC; T4 = 449.3gm WB + 50% MFL + 50% NSC; T5 = 449.3gm WB + 25% MFL + 75% NSC; T6 = PG + 449.3gm WB + 0% MFL + 100% NSC. Data were analyzed using SAS's General Linear Model (GLM) procedures (version 9.4, 2019). The result indicates that the increasing level of MFL had no significant effect on basal dry matter intake. The apparent digestibility of DM was higher (P<0.001) in T1 (60.5%) and T6 (62.5%); a higher (P<0.001) average daily gain was recorded for animals in T6 (171.0g/d). The cost-benefit analysis revealed that T5 has a good and optimum final body weight gain (30.5kg), 765.5 ET/head total return, and 381.1 ETB/head net return. It was concluded that 25% inclusion of MFL in the diet increases nutrient intake, weight gain and economic efficiency in Bonga sheep.

This article discusses a transformer-free, high-efficiency DC-DC converter besides renewable energy applications. The traditional buck-boost, classic Zeta, Sepic, and Cuk converter does have the benefits of a simple design, low cost, as well as the capacity to execute voltage step-up and step-down. Conversely, because of the detrimental consequences of the parasitic constraints of the device, the voltage conversion gain of the traditional DC-DC converter is much more restricted and the efficiency is also significantly smaller, whereas this proposed converter does have a higher voltage gain and efficiency because it is used in a single power switch, resulting in reduced switching losses and voltage stress. The said converter's design is very simple, which simplifies the operation control and reduces switching and conduction losses, leading to an efficiency of 97.4 percent. This converter seems to have the same capabilities as the Zeta converter, including continuous desired output current and desired buck-boost operation. Such an article offers the operation principle and steady evaluation, as well as a comparison with other existing high step-up configurations. The proposed converter employs a fuzzy logic controller, which improves the voltage level as well as reduces the time taken to set the voltage output of a conventional PI and ANN controller, especially in comparison to the FLC controller. For deployment, Experimental Result and MATLAB/Simulink has been used, and the modeling results indicate that the proposed controller performance has improved

This paper presents two designs of high-efficiency polarizer reflectarray antennas able to generate a collimated beam in dual-circular polarization using a linearly polarized feed, with application to high-gain antennas for data transmission links from a Cubesat. First, an 18 cm x 18 cm polarizer reflectarray operating in the 17.2 - 22.7 GHz band has been designed, fabricated and tested. The measurements of the prototype show an aperture efficiency of 52.7% for right-handed circular polarization (RHCP) and 57.3% for left-handed circular polarization (LHCP), both values higher than those previously reported in related works. Then, a dual-band polarizer reflectarray is presented for the first time, which operates in dual-CP in the frequency bands of 20 and 30 GHz. The proposed antenna technology enables a reduction of the complexity and cost of the feed chain to operate in dual-CP, as a linear-to-circular polarizer is no longer required. This property, combined with the lightweight, flat profile and low fabrication cost of printed reflectarrays, makes the proposed antennas good candidates for Cubesat applications.

. In today’s world, cyber attack is one of the major issues concerning the organizations that deal with technologies like cloud computing, big data, IoT etc. In the area of cyber security, intrusion detection system (IDS) plays a crucial role to identify suspicious activities in the network traffic. Over the past few years, a lot of research has been done in this area but in the current scenario, network attacks are diversifying in both volume and variety. In this regard, this research article proposes a novel IDS where a combination of information gain and decision tree algorithm has been used for the purpose of dimension reduction and classification. For experimental purpose the NSL-KDD dataset has been used. Initially out of 41 features present in the dataset only 5 high information gain valued features are selected for classification purpose. The applicability of the selected features are evaluated through various machine learning based algorithms. The experimental result shows that the decision tree based algorithm records highest recognition accuracy among all the classifiers. Based on the initial classification result a novel methodology based on decision tree has been further developed which is capable of identifying multiple attacks by analyzing the packets of various transactions in real time.

This work is devoted to consideration and analysis of the application of molecular dynamics simulation (MDS) methods to the study of nanosized polymer polyvinylidene fluoride (PVDF) thin ferroelectric films (two-dimensional ferroelectrics) and their composites with graphene layers: 1) to study and calculations of the polarization switching time depending on the electric field and PVDF film thickness; 2) to study and calculations of the polarization switching time depending changes of the PVDF on PVDF-TrFE film; 3) to study the polarization switching time in PVDF under influence of graphene layers. All calculations at each MDS step were carried out using quantum semi-empirical methods PM3. A comparison and analysis of the results of these calculations and the kinetics of polarization switching within the framework of the Landau-Ginzburg-Devonshire theory for homogeneous switching in ferroelectric polymer films is carried out. The study of the composite heterostructures of the “graphene-PVDF” type and calculations of their polarization switching times were presented too. It is shown that replacing PVDF with PVDF-TrFE significantly changes the polarization switching times in these thin polymer films, and that introducing various graphene layers into the PVDF layered structure leads to both an increase and a decrease in the polarization switching time. Here everything also depends on the position and displacement of the ferroelectric coercive field depending on the system damping parameters.

Objective: To perform a systematic review of real-world outcomes for anti-CGRP-mAbs. Methods: Following the PRISMA guidelines, we searched PubMed for real-world data of Erenumab, Galcanezumab, Fremanezumab, or Eptinezumab in patients with migraine. Results: We identified 104 publications (73 retrospective), comprising 8 pharmaco-epidemiologic and 63 clinic-based studies, 30 case reports and 3 other articles. None of the clinic-based studies provided follow-up data over more than one year in more than 200 patients. Findings suggest reductions in health insurance claims and days with sick-leave as well as better treatment adherence with anti-CGRP-mAbss. Effectiveness, reported in 59 clinic-based studies, was comparable to randomized controlled trials. A treatment pause was associated with an increase in migraine frequency and switching to another antibody resulted in a better response in some of the patients. Adverse events and safety issues were addressed in 70 papers including 22 single case reports. Conclusion: Real-world data on anti-CGRP-mAbs are limited by retrospective data collection, small patient numbers and short follow-up periods. The majority of papers seem to support good effectiveness and tolerability of anti-CGRP-mAbs in the real-world setting. There is an unmet need for large prospective real-world studies providing long-term follow-up of patients treated with anti-CGRP-mAbs.

Using optical characterization, it is evident that the spin state of the spin crossover molecular complex [Fe{H2B(pz)2}2(bipy)] (pz = tris (pyrazol-1-1y)-borohydride, bipy = 2,2’-bipyridine) depends on the ferroelectric polarization of an adjacent thin film of the polymer ferroelectric polyvinylidene fluoride-hexafluoropropylene (PVDF-HFP). The UV-Vis spectroscopy reveals that room temperature switching of [Fe{H2B(pz)2}2(bipy)] molecules in bilayers of PVDF-HFP/[Fe{H2B(pz)2}2(bipy)] as a function of ferroelectric polar polarization. The electric polarity dependence of bilayers of PVDF-HFP/[Fe{H2B(pz)2}2(bipy)] shows a strong dependence on the thickness of the PVDF-HFP layer. The PVDF-HFP/[Fe{H2B(pz)2}2(bipy)] interface may affect polarization retention in the PVDF-HFP thin film limit.

Providing data on usage patterns is key to assessing the reduced-risk potential of novel tobacco and nicotine products at a population level. We performed a nationwide cross-sectional survey of the general population in Japan to assess usage patterns after the introduction of tobacco heating products (THPs). Eligible participants were Japanese residents, aged 20 years or older who consented to complete the survey. Individuals living in institutions were excluded. A three-stage probability sampling method was applied that was geographically stratified by street blocks proportionate to population density. Respondents self-reported patterns of product use and reasons for THP use. Complete responses were available from 5,306 individuals, of whom 933.5 (17.6%) were current users, 984.2 (18.5%) were former users and 3388.4 (63.9%) were never users of tobacco products. Cigarettes were used by 14.6% of current tobacco product users and THPs by 5.3%. Cigarettes and THPs were used exclusively by 64.5% and 12.2%, respectively, and both were used by 12.7%. The most common reasons reported for THP use were perceived reduction in harm to self and others compared to cigarettes. While the prevalence of cigarette use in Japan is decreasing, THPs seem to be increasingly used as long-term alternatives to cigarette smoking.

In the last years, the Distribution Grid Operators (DGOs) assumed transition strategies of the distribution grids towards an active area associated with the "Smart Grids" concept. They are considering the use of Artificial Intelligence techniques, combined with advanced technologies and real-time remote communication solutions of the enormous data amounts, to develop smart solutions into the small size distribution grids, also called microgrids (μGs). These solutions will provide support for the DGOs to ensure an optimal operation of the technical infrastructure of the μGs. In this context, a bi-level methodology for solving the phase load balancing problem in the μGs with complex topologies and a high number of single-phase consumers, considering a clustering-based selection criterion of the consumers for placement of the switching devices, was proposed in the paper. A real μG from a rural area, with 114 consumers integrated into the Smart Metering System (SMS), belonging to the DGO from Romania, was considered in testing the proposed methodology. An implementation degree of 17.5%, corresponding to the phase load balancing equipment installed to only 20 consumers from the μG, led to a faster computational time with 43% and reducing the number of switching operations by 92% than in the case of a full implementation degree (100%). The performance indicators related to the unbalance factor and energy-saving used in the evaluation of the technical benefits highlighted the efficiency of the proposed methodology.

The hybrid bond graph has been studied in depth for scalar bond graphs, but how does this translate to the multi-bond graph? Here, the controlled junction – used to model structural switching such as contact – is extended to the multi-bond case. This is a simple process, assuming that all bonds switch simultaneously (which makes physical sense). A controlled 0-junction is applied to multi-bond graph of a car, which can lose contact with the ground in cornering. Dynamic causality features, but this can be accommodated using an equational submodel in 20-Sim (in a manner similar to that used with scalar bond graphs). The junction is proposed for subsequent work to develop a validated multi-body dynamics car model in cornering.

Given the increase in consumers’ preferences for coffee, it is becoming important to understand their decision-making processes in the coffee chain context. To deepen the understanding of sustainable outcomes in this context, this study investigates the role of dedication- and constraint-based mechanisms in forming consumers’ repurchase and positive word-of-mouth (WOM) intentions, two critical sustainable outcomes. We examined the effects of coffee quality, the quality of the physical environment, and service quality in accelerating the formation of dedication-based factors. Moreover, this study offers an in-depth understanding of the enablers of perceived switching costs. Data collected from 238 university students that frequently visit coffee chains are empirically tested against the proposed theoretical framework by using structural equation modeling. The results confirm that both dedication- and constraint-based factors substantially predict consumers’ sustainable outcomes in the coffee chain context. Brand image and perceived switching costs play an important role in enhancing consumers’ repurchase and positive WOM intentions compared with customer satisfaction. Coffee quality is significantly associated with both customer satisfaction and brand image, whereas the quality of the physical environment and service quality are only significantly associated with brand image. Habit is found to be the key enabler of perceived switching costs, while loyalty programs have no significant impact on perceived switching costs.

This paper proposes a single-stage asymmetrical half-bridge fly-back (AHBF) converter with resonant mode using dual-mode control. The presented converter has an integrated boost converter and asymmetrical half-bridge fly-back converter and operates in resonant mode. The boost-cell always operates in discontinuous conduction mode (DCM) to achieve high power factor. The presented converter operates simultaneously using a variable-frequency-controller (VFC) and pulse-width-modulation (PWM) controller. Unlike the conventional single-stage design, the intermediate bus voltage of this controller can be regulated depending on the main power switch duty ratio. The asymmetrical half-bridge fly-back converter utilizes a variable switching frequency controller to achieve the output voltage regulation. The asymmetrical half-bridge fly-back converter can achieve zero-voltage-switching (ZVS) operation and significantly reduce the switching losses. Detailed analysis and design of this single-stage asymmetrical half-bridge fly-back converter with resonant mode is described. A wide AC input voltage ranging from 90 to 264 Vrms and output 19 V/ 120 W prototype converter was built to verify the theoretical analysis and performance of the presented converter.

The excited-state lifetimes of the anticoagulant drug warfarin (W) in water and in the absence and presence of methyl-β-cyclodextrins (Me-β-CD) were recorded using time-resolved fluorescence measurements. Selective excitation of the open and cyclic protonated isomers of W were acquired with laser emitting diodes (LED) producing 320 and 280 nm excitation pulses, respectively. Formation of the inclusion complex was checked by UV–visible absorption spectroscopy, and the values of binding constants (2.9 × 10³ M^–1 and 4.2 × 10² M^–1 for protonated and deprotonated forms, respectively) were extracted from the spectrophotometric data. Both absorption and time-resolved fluorescence results established that the interior of the macromolecular host binds preferentially the open protonated form, red shifts the maximum of its absorption of light at ~305 nm, extends its excited-state lifetime, and decreases its emission quantum yield (ФF). Collectively, sequestration of the open guest molecules decreases markedly their radiative rate constants (kr), likely due to formation of hydrogen-bonded complexes in both the ground and excited states. Due to lack of interactions, no change was observed in the excited-state lifetime of the cyclic form in the presence of Me-β-CD. The host also increases the excited-state lifetime and ФF of the drug deprotonated form (W¯). These later findings could be attributed to the increased rigidity inside the cavity of Me-β-CD. The pKa values extracted from the variations of the UV–visible absorption spectra of W versus the pH of aqueous solution showed that the open isomer is more acidic in both ground and excited states. The positive shifts in pKa values induced by three derivatives of cyclodextrins: HE-β-CD, Ac-β-CD, and Me-β-CD supported the preferential binding of these hosts to open isomers over cyclic.

The switched inertance hydraulic system (SIHS) is a novel high-bandwidth and energy-efficient digital device which can adjust or control flow and pressure by a means that does not rely on throttling the flow and dissipation of power. An SIHS can provide an efficient step-up or step-down of pressure or flow rate by using a digital control signal. In this article, analytical models of an SIHS in a four-port high-speed switching valve configuration are proposed, and the system dynamics and performance are investigated theoretically and experimentally. The flow responses, system characteristics and power consumption can be predicted effectively and accurately by using the proposed models, which were validated by comparing with experiments and with numerical simulation. The four-port configuration is compared with the three-port configuration, and it is concluded that the former one is less efficient for valves of the same size, but provides a bi-direction control capability. As bi-direction control is a common requirement, this constitutes an important contribution to the development of efficient digital hydraulics.

Wireless Powered Communication Networks (WPCN), which has attracted much attention of researchers, also been recently recommended in 5^th generation (5G) wireless networks. With the help of the WPCN, the reliability and battery life of wireless low-power devices can be improved. In this paper, we investigate throughput and ergodic capacity in WPCN-assisted amplify-and-forward (AF) relaying system, considering two transmission modes including delay-tolerant and delay-limited. As important achievement, we propose symmetric energy harvesting protocol, namely time power switching relaying (TPSR) in order to find maximal throughput. In particular, both time switching and power switching coefficients in this schemes are considered. Unlike most of the previous works, we further focus on impact of outdated channel state information (CSI) in this WPCN. In order to evaluate information processing efficiency, the performance can be substantially improved by optimally harvesting time and power coefficients of the received signal at relay node for energy and information extraction, and by deploying several scenarios. By deploying Monte Carlo simulation, it is confirmed that the system performance is more sensitive to CSI estimation error, noise variance, signal-to-noise ratio (SNR) and resulting in other reasonable computations of TPSR need be deployed to obtain QoS requirement.

(1) Introduction: The COVID-19 pandemic presented unique challenges for patients and healthcare providers, especially for those working with obesity and related health problems. E-health has emerged as a crucial tool for the follow-up of users undergoing bariatric surgery during this period, allowing remote monitoring of users' health status and providing access to virtual consultation with health professionals. This study aims to analyze the impact of the use of telemedicine during the COVID-19 pandemic on the results of bariatric surgery and user satisfac-tion with this follow-up. (2) Method: Observational study with retrospective data collection. The variables were divided into several groups: health data, associated comorbidities, quality of life, quality of sleep and satisfaction with telemedicine monitoring. (3) Results: Surgery significantly affected weight loss, in general more than 75% loss of excess weight. Comorbidities, like the qual-ity of life, were reversed over time, with 50% of subjects maintaining excellent levels. Although most users were satisfied with the monitoring, the variables had no relationship. (4) Conclusions: The follow-up assured by telemedicine did not alter the results of bariatric surgery, which may allow us to infer that it may be an option to consider for regular monitoring of the post-bariatric surgery process.

It is argued that all physical knowledge ultimately stems from observation and that the simplest possible observation is that an event has happened at a certain space-time location . Considering historic experiments, which had been groundbreaking in the evolution of our modern ideas of matter on the atomic, nuclear and elementary particle scales, it is shown that such experiments produce as outputs macroscopically observable events which represent binary decisions with regard to simple alternatives and which accumulate in the course of time into spatio-temporal patterns whose forms allow decisions to be taken concerning conceivable alternatives of explanation. Working towards elucidating the physical and information-theoretic characteristics of those elementary pieces of information we arrive at the conclusion that - unlike the events of relativity which are mere 4-tuples of spacetime coordinates - the events of observation are pieces of information endowed with the properties of physical action, spacetime extension, and Lorentz invariance. Another important aspect is that such events are produced at the expense of irreversibly dissipating energy which can be stated in Landauer diction in the form that more energy needs to be spent in the erasure of events than had previously been invested in their initiation.

The work is devoted to the study of a MEMS resonator dynamics under the action of phase-locked and automatic gain control loops. Particular attention is directed to the study of the nonlinearity factor of the resonator elastic restoring force. It was found that the determination of control system parameters based on the stability analysis of the operating resonant mode, in the general case, does not provide the required phase adjustment and stabilization of the oscillation amplitude. Stable multifrequency modes of oscillations are found, an analytical study of the mechanisms of their appearance and evolution is carried out under variation of the key parameters of the system. The real regions of the control system stable operation are determined (which do not coincide, as was found, with the regions of stability of the operating resonant mode, due to the presence of hidden attractors in the phase space of the system). A methodology has been developed for identifying such areas of stable operation. A significant complication of the structure of possible motions in the system with an increase in the Q-factor of the resonator is revealed.

Cyber security plays an important role to protect our computer, network, program and data from unauthorized access. Intrusion detection system (IDS) and intrusion prevention system (IPS) are two main categories of cyber security, designed to identify any suspicious activities present in inbound and outbound network packets and restrict the suspicious incident. Deep neural network plays a significant role in the construction of IDS and IPS. This paper highlights a novel IDS using optimized convolution neural network (CNN-IDS). An optimized CNNIDS model is an improvement over CNN which selects the best weighted model by considering the loss in every epoch. All the experiments have been conducted on the well known NSL-KDD dataset. Information gain has been used for dimensionality reduction. The accuracy of the proposed model is evaluated through optimized CNN for both binary and multiclass categories. Finally, a critical comparison has been performed with other general classifiers like J48, Naive Bayes, NB tree, Random forest, Multilayer Perceptron (MLP), Support Vector Machine (SVM), Recurrent Neural Network (RNN) and Convolution Neural Network(CNN). All the experimental results demonstrate that the optimized CNN-IDS model records the best recognition rate with minimum model construction time.

The method propose in this study for stock market multi-objective mathematical model was linear programming using simplex algorithms to optimize the portfolio in the Nigerian Stock Market. The study selected five banks from the list of operators in the market and data were gathered from the banks to have individual market performances over a period of 5years. The data collected contains: Geometric Mean of Monthly Capital Gain Yields and Annual Capital Gain Yields from which Dividend Yields (%) were deducted to arrive Actual rate of return for the banks and the expected rate of return. Furthermore, the risk of semi-absolute deviation below the expected return is reduced. The data was analysed using Python programming because of some clauses in the data gathered. At first, the data assumes integer (-or +) and random in nature. As such, Python programming is one of the software suitable for such solution since the barrier for additivity is broken. Based on the analysis, the study therefore conclude that the potential investor(s) should invest in 13 units of investment x(GTbank Plc), 3 units of First Bank Plc`s Investment (y), 450 units of Zenith bank`s investment (z), and 8 units of Wema bank`s investment (m), and no units of investment of (n) Access bank. These investment quantities will result in the Optimal profit of p= 12797.902 billion naira.

Globally, increasing rates of obesity are one of the most important health issues. The association between breakfast skipping and body weight is contradictory between cross-sectional and interventional studies. The systematic review and meta-analyses aim to summarize this association based on observational longitudinal studies. We included prospective studies on breakfast skipping and overweight/obesity or weight change in adults. Literature was searched until September 2020 in PubMed and Web of Science. Summary RRs with a 95% CI were estimated in pairwise meta-analyses by applying a random-effects model. In total, 9 studies were included in the systematic review and 6 of them were included in the meta-analyses. The meta-analysis indicated an 13% increased RR for overweight/obesity when breakfast was skipped on ≥ 3 days per week compared to ≤ 2 days per week (95% CI: 1.06, 1.21, n=3 studies). The meta-analysis on weight change displays a 21% increased RR for weight gain for breakfast skippers compared to breakfast eaters (95% CI: 1.05, 1.40, n=2 studies). The meta-analysis on BMI change displayed no difference between breakfast skipping and eating (RR=1.02, 95% CI: 0.99, 1.05, n=2 studies). This study provides low meta-evidence for an increased risk for overweight/obesity and weight gain for breakfast skipping.

Battery/Supercapacitor(SC) current tracking control is a key issue for hybrid energy storage system (HESS) in electric vehicles. An innovative passivity-based L2-gain adaptive control (PBL2AC) based on port-controlled Hamiltonian model with dissipativity (PCHD) for reference current tracking and bus voltage stability in HESS is presented. The developed PCHD model has considered both parameter variations and external disturbances. By using L2-gain disturbance attenuation, the PBL2AC ensures robust reference current tracking and stable bus voltage. Moreover, adaptive mechanism is adopted to estimate the electrical parameters. To validate the proposed control scheme for HESS, simulations and experiments were done and compared with traditional PID and sliding mode control under several typical driving cycles, and results show that the effectiveness of the proposed controller can be confirmed.

Early detection of cancer increases the probability of recovery. This paper presents an intelligent decision support system (IDSS) for the early diagnosis of cancer based on gene expression profiles collected using DNA microarrays. Such datasets pose a challenge because of the small number of samples (no more than a few hundred) relative to the large number of genes (on the order of thousands). Therefore, a method of reducing the number of features (genes) that are not relevant to the disease of interest is necessary to avoid overfitting. The proposed methodology uses the information gain (IG) to select the most important features from the input patterns. Then, the selected features (genes) are reduced by applying the grey wolf optimization (GWO) algorithm. Finally, the methodology employs a support vector machine (SVM) classifier for cancer type classification. The proposed methodology was applied to two datasets (Breast and Colon) and was evaluated based on its classification accuracy, which is the most important performance measure in disease diagnosis. The experimental results indicate that the proposed methodology is able to enhance the stability of the classification accuracy as well as the feature selection

In this paper, precise examination of multi-port antennas with large mutual coupling between the ports is studied. For this purpose, some vital parameters such as active reflection coefficients and realised gain are emphasized. The main motivation of this research is the ignorance of this issue in several recently published papers. Hence, corrections and criticisms to some recently reported results are presented. At first, a microstrip patch consisting of two inverted U-slots is re-examined, which has been proposed in a recently published paper for wideband applications. However, the authors did not present satisfactory results to indicate the performance of the proposed structure. In reverse, some important parameters such as the antenna gain appear to be incorrectly reported. In this paper, the characteristics of the antenna are compared with a simple 50 Ω microstrip line excited by two probes, indicating no significant differences. In the remainder of this paper, some corrections are provided on two examples of wide-beam circularly polarised multi-fed antennas for satellite applications. The first example is the multi-fed spiral antennas with folded arms, which have been proposed as the widebeam antennas at 435 MHz. It is indicated that the antenna height should be increased for better performance. The second example is the quadrifilar square helical antennas with folded arms, which have been proposed as the widebeam antennas for 435 MHz with minor responses at 145 MHz. Some corrections are presented on the previously reported minor responses at 145 MHz.

This paper presents a new high-efficiency-high-step-up based converter integrating two stype DC-DC Boost and Flyback coupled magnetic converter with recovery stage dedicated to smart HVDC distributed architecture in renewable energy production systems. Appropriate duty cycle ratio assumes that the recovery stage work with parallel charge and discharge to achieve high step-up voltage gain. Besides, the voltage stress on the main switch is reduced with a passive clamp circuit and thus, low on-state resistance Rdson of the main switch can be adopted to reduce conduction losses. The circuit is simple to control. As a final point of this research, the simulation and the prototype investigational results are presented to demonstrate the effectiveness of this proposed converter.

Reliable motor control design is a critical part of the electric vehicle application. Control techniques and motor control devices play an important role in achieving system reliability. In this study, motor control devices have been proposed to implement control techniques in sensorless PMSM. Motor control devices including PWM signal generation by FPGA, gate driver circuit (GDC), and power inverter were developed to be integrated into single-stage motor control devices for sensorless motor control applications. Improvements in GDC design have been the focus to increase the performance of the motor control devices used. Switching losses due to the parasitic elements caused ringing switching behavior of the power inverter circuit, which reduces the performance when the system is integrated. Moreover, in the implementation of sensorless motor control using observer techniques, these conditions affect the accuracy of rotor position estimation, which uses the current or voltage information of the power converter as a variable in the observer design model. Therefore, a GDC design using IR2110 with additional ringing suppression circuit configuration was proposed for the application of motor device control topology to improve the performance of sensorless motor control system. Furthermore, the reduction of switching losses, reduction of current distortion, and accuracy of rotor position information were confirmed by experimental results.

Nasal cavity is a primary checkpoint for the invasion of several respiratory pathogens. Numerous pathogens including SARS-CoV-2, S. pneumonia, S. aureus, etc., adhere to the nasal epithelium or mucus to invade and trigger an infection. IgA serves as the first line of defense against foreign antigens and pathogens. They exhibit cross-reactivity against a diverse variety of antigens through immune exclusion, which intercepts the invasion of pathogens through the mucosal lining. Advances in intranasal immunization technology underscore the elevated neutralizing IgA levels at local and distal mucosa in contrast to the parenteral vaccines. This review highlights the adjuvants that induce IgA class switching and the challenges of maintaining nominal IgA levels at the mucosal surface. Finally, the review features the paradigm-shifting of conventional immunization techniques to IgA-inducing vaccines to enhance protection against homologous and heterologous pathogens.

In the paper, a coordinated control methodology of single-phase (1-P) end-users switching oper-ations on the phases of an active electric distribution network (AEDN) has been proposed to ob-tain a minimum unbalance degree at the coupling common point (CCP) level with the main dis-tribution system. The phase load balancing (PLB) process considers the smart devices that switch from one phase to another phase the 1-P end-users (consumers and prosumers) to compensate for the phase load unbalance. The proposed methodology has been tested successfully in an AEDN belonging to a Romanian Distribution Network Operator (DNO) containing 114 end-users (104 consumers/10 prosumers) integrated into the Smart Metering System (SMS). The op-timal solution leads to a value of the objective function by 1.00004, represented by the unbalance factor, very close to the ideal target, 1.00. A comparative analysis was conducted considering other possible PLB cases (the consumer-level PLB and prosumer-level PLB), obtaining similar values of the UF (1.027 vs. 1.028), slightly higher than in the hybrid-level PLB. Also, the signifi-cant technical benefits were quantified through an energy-saving of 58.73% and decreasing the phase voltage unbalance rate by 91 % compared to the initial case (without PLB). These results emphasized the positive impact of the proposed coordinated control methodology on the PLB process and evidenced its effectiveness and applicability in the AEDNs.

The objective of this study was to investigate the effects of body weight gain during the cashmere non-growing period on cashmere production performance and secondary hair follicle activity, to provide a theoretical basis for appropriate supplementary feeding of cashmere goats. Fifty Inner Mongolian cashmere goats aged 2-4 years old were randomly selected and weighed in May and September 2019, respectively. Based on body weight gain between the two weights, the experi-mental ewe goats were divided into two groups: 0-5.0 kg group (n = 30) and 5.0-10.0 kg group (n = 20). Skin samples and cashmere samples were collected. Results of Pearson correlation analysis showed that body weight gain during the cashmere non-growing period had a moderate and strong positive correlation with cashmere yield (P = 0.021) and cashmere staple length (P = 0.002) respectively, but did not correlate with cashmere diameter (P = 0.254). Compared with cashmere goats with a body weight gain of 0-5.0 kg, cashmere goats with a body weight gain of 5.0-10.0 kg had a 17.10% increment in cashmere yield (P = 0.037), 8.09% increase in cashmere staple length (P=0.045) and had no significant difference in cashmere diameter (P = 0.324). Results of Pearson correlation analysis showed that there was a strong positive correlation between body weight gain and the population of active secondary hair follicles in the skin of cashmere goats (P < 0.01). Compared with cashmere goats with a body weight gain of 0-5.0 kg, cashmere goats with a body weight gain of 5.0-10.0 kg had an increase in the population of active secondary hair follicles (P < 0.05). In conclusion, the body weight gain during the cashmere non-growing period had a sig-nificant effect on secondary hair follicle activity and cashmere production performance in cash-mere goats. Since body weight gain reflects nutritional level to a certain extent, this study suggests that nutritional manipulations such as supplementary feeding during cashmere non-growing periods can increase cashmere production performance. However, specific nutritional manipula-tions during the cashmere non-growing period need further research to increase cashmere pro-duction performance.