Firstly, we present a more explicit formulation of the complete system $D(N)$ of representatives of Manin's symbols over $\mathbb{Q}$, which was initially given by Shimura. Then we establish a bijection between $D(M)\times D(N)$ and $D(MN)$ for $(M,N)=1$, which reveals a recursive structure between Manin's symbols of different levels. Based on Manin's complete system $\Pi (N)$ of representatives of cusps on $X_0(N)$ and Cremona's characterization of the equivalence between cusps, we establish a bijection between a subset $C(N)$ of $D(N)$ and $\Pi (N)$, and then establish a bijection between $C(M)\times C(N)$ and $C(MN)$ for $(M,N)=1$. We also provide a recursive structure for elliptical points on $X_0(N)$. Based on these recursive structures, we obtain recursive algorithms for constructing Manin symbols over $\mathbb{Q}$, cusps and elliptical points on $X_0(N)$. This gives rise to a more efficient algorithms for modular elliptic curve. As direct corollaries of these recursive structures, we present a recursive version of the genus formula and an elementary proof of formulas of the numbers of $D(N)$, cusps and elliptical points on $X_0(N)$.

This study generalized the best copula to characterize the joint probability distribution between rainfall severity and duration in Peninsular Malaysia using two dimensional copulas. Specifically, to construct copulas, Inference Function for Margins (IFM) and Canonical Maximum Likelihood (CML) methods were specially exploited. For the purpose of achieving copula fitting, the derived rainfall variables by making use of the Standardized Precipitation Index (SPI) were fitted into several distributions. Five copulas, namely Gaussian, Clayton, Frank, Joe and Gumbel were put to the tests to establish the best data fitted copula. The tests produced acknowledged and satisfactory results of copula fitting for rainfall severity and duration. Surveying the Akaike Information Criterion (AIC) and the Bayesian Information Criterion (BIC), only three copulas produced a better fit for parametric and semi parametric approaches. Finally, two consistency tests were conducted and the results had shown that Frank Copula produced consistent results.

Light trapping in single nanowires (NWs) are of vital importance for photovoltaic applications. However, circular NWs (CNWs) can limit its light-trapping ability due to high geometrical symmetry. In this work, we present a detailed study of light trapping in single NWs with an elliptical cross-section (ENWs). We demonstrate that the ENWs exhibit significantly enhanced light trapping compared with the CNWs, which can be ascribed to the symmetry-broken structure that can orthogonalize the direction of light illumination and the leaky mode resonances (LMRs). That is, the elliptical cross-section can simultaneously increase the light path length by increasing the vertical axis and reshape the LMR modes by decreasing the horizontal axis. We found that the light absorption can be engineered via tuning the horizontal and vertical axes, the photocurrent is significantly enhanced by 374.0% (150.3%, 74.1%) or 146.1% (61.0%, 35.3%) in comparison with that of the CNWs with the same diameter as the horizontal axis of 100 (200, 400) nm or the vertical axis of 1000 nm, respectively. This work advances our understanding of how to improve light trapping based on the symmetry breaking from the CNWs to ENWs and provides a rational way for designing high-efficiency single or self-assembled NW photovoltaic devices.

Most of the existing calibration methods for binocular stereo vision sensor (BSVS) depend on high-accuracy target with feature points that are difficult to manufacture and costly. In complex light conditions, optical filters are used for BSVS, but they affect imaging quality. Hence, the use of a high-accuracy target with certain-sized feature points for calibration is not feasible under such complex conditions. To solve these problems, a calibration method based on unknown-sized elliptical stripe images is proposed. With known intrinsic parameters, the proposed method adopts the elliptical stripes located on the parallel planes as a medium to calibrate BSVS online. In comparison with the common calibration methods, the proposed method avoids utilizing high-accuracy target with certain-sized feature points. Therefore, the proposed method is not only easy to implement but is a realistic method for the calibration of BSVS with optical filter. Changing the size of elliptical curves projected on the target solves the difficulty of applying the proposed method in different fields of view and distances. Simulative and physical experiments are conducted to validate the efficiency of the proposed method. When the field of view is approximately 400 mm × 300 mm, the proposed method can reach a calibration accuracy of 0.03 mm, which is comparable with that of Zhang’s method.

The purpose of this paper is to investigate the effect of a varying moment on the rotation angle of a large tethered satellite that is orbiting a planet. Two different types of orbits were investigated: a simple circular orbit and an elliptical orbit. Cases with zero and non-zero initial angular rotation velocity were investigated as well. This investigation will assist satellite docking missions. The large rigid tethered satellite is a futuristic concept, and this investigation is meant to assist possible docking missions to the satellite. To simplify the problem, the rotation is constrained to the orbital plane.

Based on detection of elliptical particle tracks, $\simeq 137^2 n^2$ bigger than Bohr-Sommerfeld electron orbits, indicating the possible detection of superluminal electrons masquerading as magnetic monopoles, new relations become accessible leading to: (i) a new set of seven elementary lengths; (ii) replacement of the usual motion (Lorentz) transformations by scale transformations between $v^2<c^2$ and $v^2>c^2$ frames; (iii) equivalence of charge between $v^2<c^2$ and $v^2>c^2$ frames based on the Dirac-Schwinger quantization condition; (iv) a relativistic foundation for the Dirac-Schwinger quantization condition; (v) a possible cause of charge quantization; and (vi) the prospect of symmetry in Maxwell's equations. If the elliptical particle tracks are viewed as a magnification of electron orbits, the effect is suggestive of a spacetime distortion such as those predicted in general relativistic theories.

The objective of this research is to develop an experimental-theoretical analysis about the influence of the cooling medium and the geometry of the welding bead profile in fatigue life and associated parameters with structural integrity of welded joints. A welded joint with cruciform geometry is considered using SMAW, plates in structural steel ASTM A36 HR of 8 mm of thickness and E6013 electrode input. A three-dimensional computational model of the cruciform joint was created using the finite element method. For this model, the surface undulation of the cord and differentiation in the mechanical properties of the fusion zone were considered, the heat-affected zone (HAZ) and base material, respectively. In addition, an initial residual stress field which was established experimentally was considered. The results were a set of analytical expressions for the weld magnification factor Mk. It was found that values for the latter decrease markedly in function of the intensity of the cooling medium used in the post welding cooling phase, mainly due to the effect of the residual compressive stresses. The obtained models of behavior of the weld magnification factor are compared with the results from other researchers with some small differences, mainly due to the inclusion of the cooling effect of the post weld and the variation of the leg of the weld bead. The obtained analytical equations in the present research for Mk can be used in management models of life and structural integrity for this type of welded joint.

I argue that the main feature of elliptical space – the topological identification of its antipodal points – might be behind some observational facts on both cosmological and microscopic scales. I use calculated distance moduli of type-Ia supernovae, which are commonly regarded as “standard candles” for distance measure in cosmology. These are compared with the observational data collected in a catalogue called “Pantheon+”. On the microscopic scale I show that a physical elliptical space, in which the mathematical connectedness between antipodal points is replaced with physical connections via the Einstein-Rosen bridges (also called “wormholes”), gives rise to sub-particle structures similar to J.A. Wheeler’s geons. The interactions between these structures leading to their equilibrium configurations can explain the experimentally observed pattern of properties of elementary particles forming the standard model of particle physics. The answer to the question why we have this particular set of fundamental particles might lie in the fundamental properties of elliptical space.

Turbo-roundabouts are one of the most frequently recommended road junction design options when it comes to increasing traffic capacity and traffic safety. This is in particular true of suburban areas, with dominant traffic flow on the main road and moderate traffic flow on the side road. Other intersections handling local traffic and considerably constricting the availability of space are usually located in the vicinity of such intersections. Another factor contributing to less availability of land for construction in these locations is the presence of surrounding residential housing. Then choosing the suitable turbo-roundabout type becomes the main issue. The article presents a case study for the selection of a type of turbo roundabout under the conditions of considerably constricted land availability, based on analyses of provision of swepth path for the chosen design vehicles. The article considers the typical Egg type turbo roundabouts, "flattened" turbo roundabouts and ellipse based roundabouts, with unconventional geometries of the truck apron and central island. For each of the analysed roundabout types setting out methods were described in detail, which enable designers to quickly select a type of roundabout suitable for specific constrained site conditions.

A four-parameter kinematic model for the position of a fluid parcel in a time-varying ellipse is introduced. For any ellipse advected by an arbitrary linear two-dimensional flow, the rates of change of the ellipse parameters are uniquely determined by the four parameters of the velocity gradient matrix, and vice-versa. This result, termed ellipse/flow equivalence, provides a stronger version of the well-known result that a linear velocity field maps an ellipse into another ellipse. Moreover, ellipse/flow equivalence is shown to be a manifestation of Stokes' theorem. This is done by deriving a matrix-valued relationship, called the geometric Stokes' theorem, that involves a spatial integral over the velocity gradient tensor, thus accounting for the two strain terms in addition to the divergence and vorticity. General expressions for various physical properties of an elliptical ring of fluid are also derived. The ellipse kinetic energy is found to be composed of three portions, associated respectively with the circulation, the rate of change of the moment of inertia, and the variance of parcel angular velocity around the ellipse. A particular innovation is the use of four matrices, termed the IJKL basis, that greatly facilitate the required calculations.

In the literature of Low-Energy Nuclear Reactions (LENR), particle tracks in photographic emulsions (and other materials) associated with certain electrical discharges have been reported. Some Russian and French researchers have considered these particles to be magnetic monopoles. These tracks correspond directly to tracks created with a simple uniform exposure to photons without an electrical discharge source. This simpler method of producing tracks supports a comprehensive exploration of particle track properties. Out of 750 exposures with this method, elliptical particle tracks were detected, 22 of which were compared to Bohr-Sommerfeld electron orbits. Ellipses fitted to the tracks were found to have quantized semi-major axis sizes with ratios of ≈n²/α² to corresponding Bohr-Sommerfeld hydrogen ellipses. This prompts inquiry relevant to magnetic monopoles due to the n²/α² force difference between magnetic charge and electric charge using the Schwinger quantization condition. A model using analogy with the electron indicates that the elliptical tracks could be created by a bound magnetically charged particle with mass m_m = 1.45 × 10^-3 eV/c², yet with superluminal velocities. Using a modified extended relativity model, m_m becomes the relativistic mass of a superluminal electron, with m₀ = 5.11 × 10^-3 eV/c², the fine structure constant becomes a mass ratio and charge quantization is the result of two states of the electron.

The goal of this paper is to present a low-cost, low-power prototype of a pulsed Ultra Wide Band UWB) oscillator and an UWB elliptical dipole antenna integrated on the same Radio Frequency (RF) Printed Circuit Board (PCB) and its digital control board for Real Time Locating System (RTLS) applications. The design is compatible with IEEE 802.15.4 high rate pulse repetition UWB standard being able to work between 6 GHz and 8.5 GHz with 500 MHz bandwidth and with a pulse duration of 2 ns. The UWB system has been designed using the CST Microwave Studio transient Electro-Magnetic (EM) circuit co-simulation method. This method integrates the functional circuit simulation together with the full wave (EM) simulation of the PCB’s 3D model allowing fast parameter tuning. The PCB has been manufactured and the entire system has been assembled and measured. Simulated and measured results are in excellent agreement with respect to the radiation performances as well as the power consumptions.

The paper describes a new formula for calculating the mutual inductance between a thin conical sheet inductor and a filamentary circular loop, which are coaxial. The presented formula is derived semi-analytically using the complete elliptic integrals of the first, second, and the third kind, along with the integral term which will be solved numerically. The results are validated using double and single integration methods, as well as the semi-analytical formula. The mutual inductance between a thin wall solenoid and a filamentary circular loop can be obtained using the new formula for the conical coil and circular loop. Presented formulas can be useful in various applications, such as broadband RF and wireless power transfer systems that utilize conical inductors. Overall, the paper presents a valuable contribution to the field of inductor design and can be useful in various applications involving conical inductors.