Numerical weather prediction is an initial-value problem, for determination of the initial conditions, there are many methods and one of the most classical methods is variational methods in three dimensions, or 3D-Var. In this approach, with a defined cost function proportional to the square of the distance between the analysis and both the background and the observations, one can obtain the analysis. In the cost function, the background and the observations are reshaped to vectors; within this step, the order of the background error covariance matrix and the observational error covariance matrix becomes huge, which is not convenient to one to obtain the analysis. In this paper, according to the matrix analysis approach, we put forward some possible improvements to the dimension-reduction algorithm of 3D-Var, so that provide some references for data assimilation.

A Demand-side management technique are deployed along with battery energy-storage systems (BESSs) to lower the electricity cost by mitigating the peak load of a building. Most of the existing methods rely on manual operation of the BESS, or even an elaborate building energy-management system resorting to a deterministic method that is susceptible to unforeseen growth in demand. In this study we propose a real-time optimal operating strategy for BESS based on density demand forecast and stochastic optimization. This method takes into consideration uncertainties in demand when accounting for an optimal BESS schedule, making it robust compared to the deterministic case. The proposed method is verified and tested against existing algorithms. Data obtained from a real site in South Korea is used for verification and testing. The results show that the proposed method is effective, even for the cases where the forecasted demand deviates from the observed demand

The phenomenon of missing data can be seen everywhere in reality. Most typical attribute reduction models are only suitable for complete systems. But for incomplete systems, we can’t obtain the effective reduction rules. Even if there are a few reduction approaches, the classification accuracy of their reduction sets still needs to be improved. In order to overcome these shortcomings, this paper firstly defines the similarities of intra-cluster objects and inter-cluster objects based on the tolerance principle and the mechanism of knowledge granularity. Secondly, attributes are selected on the principle that the similarity of inter-cluster objects is small and the similarity of intra-cluster objects is large, and then the knowledge granularity attribute model is proposed under the background of clustering; Then, the IKAR algorithm program is designed. Finally, a series of comparative experiments about reduction size, running time and classification accuracy are conducted with twelve UCI data sets to evaluate the performance of IKAR algorithms, then the stability of Friedman test and Bonferroni-Dunn test are conducted. The experimental results indicate that the proposed algorithms are efficient and feasible.

The new energy structure needs to balance energy security and dual carbon goals, which has brought major challenges to coal-fired power plants, the pollution reduction and carbon emissions reduction of coal-fired power plants will be a key task in the future. This article proposes an optimization operation of electrostatic precipitators(ESP), based on the working mechanism and historical data of ESP, voltage-current characteristic model and outlet dust concentration prediction model are constructed by deep learning algorithm, Particle Swarm Optimization(PSO) is used to achieve the optimal energy consumption while ensuring stable outlet dust concentration. By training with historical data collected on site, accurate prediction of secondary current and outlet dust concentration of ESP has been achieved, the Mean Absolute Percentage Error(MAPE) of secondary current is less than 1.5%, and the MAPE of outlet dust concentration of ESP on the test set is less than 5.2%. Finally, the optimization experiment is carried out in a 330MW coal-fired power plants, the results showed that the fluctuation of the outlet dust concentration is more stable, and the energy saving is about 43% after optimization, according to the annual operation of 300 days, the annual average carbon reduction is approximately 2621.34 tons. This method is effective and can be applied widely.

In addition to image filtering in the spatial and frequency domains, fractal characteristics induced algorithms offers considerable flexibility in the design and implementations of image processing solutions in areas such as image enhancement, image restoration, image data compression and spectrum of applications of practical interests. Facing up to a real-world problem of identifying workpiece surface defects, a generic adaptive fractal filtering algorithm is proposed, which shows advantages on the problems of target recognition, feature extraction and image denoising at multiple scales. First, we reveal the physical principles underlying between signal SNR and its representative fractal dimension indicative parameters, validating that the fractal dimension can be used to adaptively obtain the image features. Second, an adaptive fractal filtering algorithm (Abbreviated as AFFA) is proposed according to the identified correlation between the image fractal dimensions and the scales of objects, and it is verified by a benchmarking image processing case study. Third, by using the proposed fractal filtering algorithm, surface defects on a flange workpiece are identified. Compared to conventional image processing algorithms, the proposed algorithm shows superior computing simplicity and better performance Numerical analysis and engineering case studies show that the fractal dimension is eligible for deriving an adaptive filtering algorithm for diverse-scale object identification, and the proposed AFFA is feasible for general application in workpiece surface defect detection.

One of the most common limits to gas sensor performance is the presence of unwanted interference fringes or etalons arising, for example, from multiple reflections between surfaces in the optical path. Additionally, since the amplitude and the frequency of these interference depend on the distance and alignment of the optical elements, they are affected by temperature changes and mechanical disturbances, giving rise to a drift of the signal. In this work, we present a novel semi-parametric algorithm which allows the extraction of a signal, like the spectroscopic absorption line of a gas molecule, from a background containing arbitrary disturbances, without having to make any assumption on the functional form of these disturbances. The algorithm is applied first to simulated data and then to oxygen absorption measurements in presence of strong fringes.To the best of the authors' knowledge, the algorithm enables an unprecedented accuracy particularly if the fringes have a free spectral range and amplitude comparable to those of the signal to be detected. The described method presents the advantage of being based purely on post processing, and to be of extremely straightforward implementation if the functional form of the Fourier transform of the signal is known. Therefore it has the potential to enable interference-immune absorption spectroscopy. Finally, its relevance goes beyond absorption spectroscopy for gas sensing since it can be applied to any kind of spectroscopic data.

Containing hundreds of spectral bands (features), hyperspectral images (HSIs) have high ability in discrimination of land cover classes. Traditional HSIs data processing methods consider the same importance for all bands in the original feature space (OFS), while different spectral bands play different roles in identification of samples of different classes. In order to explore the relative importance of each feature, we learn a weighting matrix and obtain the relative weighted feature space (RWFS) as an enriched feature space for HSIs data analysis in this paper. To overcome the difficulty of limited labeled samples which is common case in HSIs data analysis, we extend our method to semisupervised framework. To transfer available knowledge to unlabeled samples, we employ graph based clustering where low rank representation (LRR) is used to define the similarity function for graph. After construction the RWFS, any arbitrary dimension reduction method and classification algorithm can be employed in RWFS. The experimental results on two well-known HSIs data set show that some dimension reduction algorithms have better performance in the new weighted feature space.

This paper is concerned with developing an efficient numerical algorithm for fast implementation of the sparse grid method for computing the $d$-dimensional integral of a given function. The new algorithm, called the MDI-SG ({\em multilevel dimension iteration sparse grid}) method, implements the sparse grid method based on a dimension iteration/reduction procedure, it does not need to store the integration points, nor does it compute the function values independently at each integration point, instead, it reuses the computation for function evaluations as much as possible by performing the function evaluations at all integration points in a cluster and iteratively along coordinate directions. It is shown numerically that the computational complexity (in terms of CPU time) of the proposed MDI-SG method is of polynomial order $O(Nd^3 )$ or better, compared to the exponential order $O(N(\log N)^{d-1})$ for the standard sparse grid method, where $N$ denotes the maximum number of integration points in each coordinate direction. As a result, the proposed MDI-SG method effectively circumvents the curse of dimensionality suffered by the standard sparse grid method for high-dimensional numerical integration.

Fibroepithelial lesions (FL) of the breast, in particular Phyllodes tumors (PT) and fibroadenomas, pose a significant diagnostic challenge. There are no generally accepted criteria that distinguish benign, borderline, malignant PT, and FA. Combined genome-wide DNA methylation and copy number variant (CNV) profiling is an emerging strategy to classify tumors. We compiled a series of patient-derived archival biopsy specimens reflecting the FL spectrum and histological mimickers including clinical follow-up data. DNA methylation and CNVs were determined by well-established microarrays. Comparison of the patterns with a pan-cancer dataset assembled from public resources including "The Cancer Genome Atlas" (TCGA) and "Gene Expression Omnibus" (GEO) suggests that FLs form a methylation class distinct from both control breast tissue as well as common breast cancers. Complex CNVs were enriched in clinically aggressive FLs. Subsequent fluorescence in situ hybridization (FISH) analysis detected respective aberrations in the neoplastic mesenchymal component of FLs only, confirming that the epithelial component is non-neoplastic. Of note, our approach could lead to the elimination of the diagnostically problematic category of borderline PT and allow for optimized prognostic patient stratification. Furthermore, the identified recurrent genomic aberrations such as 1q gains (including MDM4), CDKN2a/b deletions and EGFR amplifications may inform therapeutic decision-making.

Accounting studies neglected to link corporate social responsibility to accounting information, the theoretical background revealed the study gap and the paper referred to it in the question: Do the corporate social responsibility CSR dimensions affect the accounting information quality? as the study aimed to reveal the effect of corporate social responsibility dimensions (economic, ethical, legal, and philanthropic) on accounting information quality (relevance and reliability) in banks in the Riyadh Governorate in Saudi Arabia. The researcher used a questionnaire to collect data from the study sample, and the data analysis was done using SPSS and smart partial least squares (pls), and its reliability and validity have been confirmed. Result revealed a positive effect of CSR (economic, ethical) dimension on the relevance of accounting information, a negative effect of CSR Legal dimension on the relevance of accounting information, and no effect of CSR philanthropic dimension on the relevance of accounting information, a positive effect of CSR (ethical, philanthropic) dimension on the reliability of accounting information and no effect of CSR economic and legal dimension on the reliability of accounting information.

New setting is introduced to study resolving number and chromatic number alongside dominating number. Different types of procedures including set, optimal set, and optimal number alongside study on the family of neutrosophic hypergraphs are proposed in this way, some results are obtained. General classes of neutrosophic hypergraphs are used to obtains these numbers and the representatives of the colors, dominating sets and resolving sets. Using colors to assign to the vertices of neutrosophic hypergraphs and characterizing resolving sets and dominating sets are applied. Some questions and problems are posed concerning ways to do further studies on this topic. Using different ways of study on neutrosophic hypergraphs to get new results about numbers and sets in the way that some numbers get understandable perspective. Family of neutrosophic hypergraphs are studied to investigate about the notions, dimension and coloring alongside domination in neutrosophic hypergraphs. In this way, sets of representatives of colors, resolving sets and dominating sets have key role. Optimal sets and optimal numbers have key points to get new results but in some cases, there are usages of sets and numbers instead of optimal ones. Simultaneously, three notions are applied into neutrosophic hypergraphs to get sensible results about their structures. Basic familiarities with neutrosophic hypergraphs theory and hypergraph theory are proposed for this article.

In this paper, we make research on fractal characteristics of the superposition of fractal surfaces in the view of fractal dimension. We give the upper bound of the lower and upper Box dimension of the graph of the sum of two bivariate continuous functions and calculate the exact values of them under some particular conditions. Further, it has been proved that the superposition of two continuous surfaces cannot keep the fractal dimensions invariable unless both of them are two-dimensional. A concrete example of numerical experiment has been provided to verify our theoretical results. This study can be applied to the fractal analysis of metal fracture surfaces or computer image surfaces.

New notion of dimension as set, as two optimal numbers including metric number, dimension number and as optimal set are introduced in individual framework and in formation of family. Behaviors of twin and antipodal are explored in fuzzy(neutrosophic) graphs. Fuzzy(neutrosophic) graphs, under conditions, fixed-edges, fixed-vertex and strong fixed-vertex are studied. Some classes as path, cycle, complete, strong, t-partite, bipartite, star and wheel in the formation of individual case and in the case, they form a family are studied in the term of dimension. Fuzzification(neutrosofication) of twin vertices but using crisp concept of antipodal vertices are another approaches of this study. Thus defining two notions concerning vertices which one of them is fuzzy(neutrosophic) titled twin and another is crisp titled antipodal to study the behaviors of cycles which are partitioned into even and odd, are concluded. Classes of cycles according to antipodal vertices are divided into two classes as even and odd. Parity of the number of edges in cycle causes to have two subsections under the section is entitled to antipodal vertices. In this study, the term dimension is introduced on fuzzy(neutrosophic) graphs. The locations of objects by a set of some junctions which have distinct distance from any couple of objects out of the set, are determined. Thus it’s possible to have the locations of objects outside of this set by assigning partial number to any objects. The classes of these specific graphs are chosen to obtain some results based on dimension. The types of crisp notions and fuzzy(neutrosophic) notions are used to make sense about the material of this study and the outline of this study uses some new notions which are crisp and fuzzy(neutrosophic). Some questions and problems are posed concerning ways to do further studies on this topic. Basic familiarities with fuzzy(neutrosophic) graph theory and graph theory are proposed for this article.

In this speculative analysis, interdimensionality is introduced as the (co)existence of universes embedded into larger ones. These interdimensional universes may be isolated or intertwined, suggesting a variety of interdimensional intrinsic phenomena that can only be understood in terms of the outer, extrinsic reality.

In two dimensional disordered lattices, presence of interaction makes particles less localized than the non-interacting ones within the range of disorder strength W ≤ 4 and interaction strength V ≤ 4. If the interaction strength is higher, then particles localize more. Although, a localization-delocalization transition is not found, a transition with changes in the dominant correlations is observed. The nature of correlations between the particles as nearest neighbors become dominant beyond certain disorder strengths.

Introduction: When analyzing the current situation in Spain, derived from our current lifestyles far from following a Mediterranean lifestyle, there is an alarming prevalence of diabesity, which increases the global risk of suffering from cardiovascular disease (CVD) and decreases the quality of life related to health (QLRH). In order to guarantee, beyond glycemic control of patients with type 2 diabetes (DM2), adequate control of cardiovascular risk factors (CVRF) in DM2, it will be necessary to carry out a community intervention focused on the application of education programs focused on promoting the acquisition of healthy eating habits through the Mediterranean diet (DMED). This dietary pattern, together with physical exercise, has been shown to contribute to improving the QLRH of patients. Objective: To analyze the quality of life related to health, present in patients with poorly controlled type 2 diabetes, to determine the possible relationship between this and the degree of adherence to the Mediterranean diet and to examine whether there are differences between the sexes. Material and methods: Observational descriptive study in 93 patients diagnosed with DM2 with poor glycemic control (1Ac ≥ 7%), carried out in various health centers in Albacete and Cuenca, in which the baseline relationship between adherence to DMed and the HRQoL. They were administered a data collection sheet that included a survey of the degree of adherence to the DMed (MEDAS-14) and QLRH (SF-12v2) in the Primary Care (PC) medical and nursing consultations. The variables were analyzed: age groups, sex, years of evolution of DM2, body mass index (BMI), as well as basal glycemia (GB) and glycosylated hemoglobin (HbA1c). The “MEDAS-14” (adherence to DMED) was the main variable and the “SF-12v2” (QLRH) was the secondary variable. Material and methods: Observational descriptive study in 93 patients diagnosed with DM2 with poor glycemic control (1Ac ≥ 7%), carried out in various health centers in Albacete and Cuenca, in which the baseline relationship between adherence to DMed and the HRQoL. They were administered a data collection sheet that included a survey of the degree of adherence to the DMed (MEDAS-14) and QLRH (SF-12v2) in the Primary Care (PC) medical and nursing consultations. The variables were analyzed: age groups, sex, years of evolution of DM2, body mass index (BMI), as well as basal glycemia (GB) and glycosylated hemoglobin (HbA1c). The “MEDAS-14” (adherence to DMED) was the main variable and the “SF-12v2” (QLRH) was the secondary variable. Results: Patients with poorly controlled DM2 and with low adherence to the MedDM show a non-significantly greater affectation in the physical sphere: fair general state of health, physical function I (limitation to make moderate efforts such as moving a table, vacuuming or walk more than an hour), physical function II (limitation to climb several flights of stairs), physical role (problems at work or daily activities doing less than loved ones), physical role II (they had to stop performing some tasks at work or activities of daily living) and regular body pain. Presenting less affectation in the mental field: emotional role I, emotional role II, mental health I, vitality and mental health II. Without affectation in the social function since they consider that rarely the emotional or physical problems have hindered their social activities. Conclusions: Diabetic patients with poor glycemic control have low adherence to the MedMD (<9 points) and have poor QLRH. Low adherence to the DMed and obesity are related to a greater affectation in the physical dimension and less affectation in the mental dimension without affectation in the "social function".

The accuracy of sales prediction models based on the big data of online word-of-mouth (eWOM) is still not satisfied. We argue that eWOM contains heat and sentiments of different product dimensions, which can improve the accuracy of these models. In this paper, we propose a dynamic topic analysis (DTA) framework in order to extract heat and sentiments of product dimensions from the big data of eWOM. Finally, we propose an autoregressive-heat-sentiment (ARHS) model, which integrates heat and sentiments of dimensions into the baseline predictive model. The empirical study in movie industry confirms that heat and sentiments of dimensions can improve the accuracy of sales prediction model. ARHS model is better for movie box-office revenue prediction than other models.

In this outlet, I’ve devised the concept of relation amid two points where these points are coming up to make situation which in that the set of objects are greed to represent the story of how to be in whatever situations when these two points have the styles of being everywhere in the highlights of the concept which are coming from the merits of these points where are eligible to make capable situation to overcome every situation when they’re participant in the hugely diverse situations which mean too styles of graphs with have the name or the general results for the general situation as possible as are.

In the last years, we have witnessed a remarkable progress of algorithms solving Boolean satisfiability (SAT). The success of these algorithms has been especially relevant in a large number of industrial or real-world applications, for which these SAT solvers are nowadays an essential core part of their solving processes. Interestingly enough, these applications include a very diverse and heterogeneous range of domains, such as hardware verification, planning, and cryptography, among others. Unfortunately, the reasons of the good performance of these solvers on this variety of industrial benchmarks are not completely understood yet. Since SAT solvers’ efficiency is fundamental in various domains, obtaining a better understanding of these algorithms and the reasons of their good performance is crucial. In order to shed light on this question, SAT solvers are often viewed as complex systems with many interconnected components (e.g., conflict analysis and learning mechanism, database management, search restarts) interacting in many unpredictable ways. There is the common belief that the resulting emergent behavior of these complex systems takes advantage of a certain underlying structure of the SAT formula, which is shared by the majority of these industrial problems regardless the domain they come from. Recently, there have been some attempts of characterizing this structure under the lens of complex networks, with the purpose of better understanding the success of the solvers, and potentially improving them. In this paper, we analyze the structure of industrial SAT instances under the lens of self-similarity, and study how the execution of SAT solvers affect that structure. Many real-world graphs exhibit self-similar structure (with small fractal dimension), which means that after rescaling (replacing groups of nodes by a single node), the same kind of structure can be observed. In our analysis, in which we represent SAT instances as graphs, we observe that many industrial SAT formulas exhibit the same kind of structure. Moreover, we analyze how this structure evolves by effects of learning new clauses during the search. In particular, we observe that learned clauses usually contain variables that are close in the graph representation of the formula. This is, the learning mechanism tends to work locally. On the contrary, this learning mechanism on random SAT formulas –which do not exhibit any structure at all– is unable to generate these local clauses. This difference contributes to explain the success of modern SAT solvers on industrial problems.

In this work we study the following problem, from a computational point of view: If three points are selected in the unit square at random, what is the probability that the triangle obtained is obtuse, acute or right? We provide two convergent strategies: the frst derived from the ideas introduced in [2] and the second built on the combinatorics theory. The combined use of these two methods allows us to address the random triangle theory from a new perspective and, we hope, to work out a general method of dealing with some classes of computational problems.

In this paper we use the additive thermodynamic formalism to obtain new bounds of the Hausdorff and box-counting dimension of certain non conformal hyperbolic repellers defined by piecewise smooth expanding maps on a $d$-dimensional smooth manifold $M$.

Kronecker products of matrices have some striking operation properties, one of which is called the mixed-product property $(A \!\otimes\! B)(C \!\otimes\! D) = AC \!\otimes\! BD$. In view of this property, the two-term Kronecker product $A_1 \otimes A_2$ can be rewritten as $A_1 \otimes A_2 = (A_1 \otimes I_{m_2})(I_{m_1} \otimes A_2)$ of dilation forms of $A_1$ and $A_2$, and three-term Kronecker product $A_1 \otimes A_2 \otimes A_3$ can be rewritten as the products $A_1 \otimes A_2 \otimes A_3 = (A_1\otimes I_{m_2} \otimes I_{m_3})(I_{m_1} \otimes A_2 \otimes I_{m_3})(I_{m_1} \otimes I_{m_2} \otimes A_3)$ of the dilation forms of $A_1$, $A_2$, and $A_3$, respectively, where the matrices on the right-hand sides of the two factorizations are commutative. In this note, we approach the commutative Kronecker products on the right-hand sides of the two factorization equalities, and present a variety of new and useful analytical formulas for calculating the ranks, dimensions, orthogonal projectors, and ranges of matrices composed of these Kronecker products.

Relationships among near set theory, shape maps and recent accounts of the Quantum Hall effect pave the way to quantum computations performed in higher dimensions. We illustrate the operational procedure to build a quantum computer able to detect, assess and quantify a fourth spatial dimension. We show how, starting from two-dimensional shapes embedded in a 2D topological charge pump, it is feasible to achieve the corresponding four-dimensional shapes, which encompass a larger amount of information. This novel, relatively straightforward architecture not only permits to increase the amount of available qbits in a fixed volume, but also converges towards a solution to the problem of optical computers, that are not allowed to tackle quantum entanglement through their canonical superposition of electromagnetic waves.

The residual multiparticle entropy (RMPE) of a fluid is defined as the difference, Δs, between the excess entropy per particle (relative to an ideal gas with the same temperature and density), s_ex, and the pair-correlation contribution, s₂. Thus, the RMPE represents the net contribution to s_ex due to spatial correlations involving three, four, or more particles. A heuristic “ordering” criterion identifies the vanishing of the RMPE as an underlying signature of an impending structural or thermodynamic transition of the system from a less ordered to a more spatially organized condition (freezing is a typical example). Regardless of this, the knowledge of the RMPE is important to assess the impact of non-pair multiparticle correlations on the entropy of the fluid. Recently, an accurate and simple proposal for the thermodynamic and structural properties of a hard-sphere fluid in fractional dimension 1 < d < 3 has been proposed [Santos, A.; López de Haro, M. Phys. Rev. E 2016, 93, 062126]. The aim of this work is to use this approach to evaluate the RMPE as a function of both d and the packing fraction ϕ. It is observed that, for any given dimensionality d, the RMPE takes negative values for small densities, reaches a negative minimum Δs_min at a packing fraction ϕ_min, and then rapidly increases, becoming positive beyond a certain packing fraction ϕ₀. Interestingly, while both ϕ_min and ϕ₀ monotonically decrease as dimensionality increases, the value of Δs_min exhibits a nonmonotonic behavior, reaching an absolute minimum at a fractional dimensionality d ≃ 2.38. A plot of the scaled RMPE Δs/|Δs_min| shows a quasiuniversal behavior in the region −0.14 ≲ ϕ − ϕ₀ ≲ 0.02.

Metal organic frameworks (MOFs) are used in catalysis due to their high specific surface area and porous structure. The dispersed active sites and limited reaction space render MOFs have the potential for highly selective electrocatalytic CO2 reduction reaction (ECO2RR). Meanwhile, formic acid (HCOOH) is attracting attention as a liquid product with high economic benefits. This review summarizes the MOFs and their derivatives applied for ECO2RR into HCOOH products. The preparation methods of MOFs as electrocatalysts and their unique advantages are discussed. A series of MOFs, and MOFs derivatives obtained by electrochemical reduction or carbonization processes are highlighted, including metal nanomaterials, carbon-based nanocomposites, single-atom catalysts, and bimetallic nanocomposites. Depending on the MOFs building units (metal ions and organic linkers) and the reaction conditions of derivatization, MOFs-based catalysts exhibit rich diversity and controllable modulation of catalytic performance. Finally, the challenges encountered at this stage and the future research directions of MOFs-based catalysts are proposed.

The improvement of the methane combustion activity was observed in cyclic temperature-programmed and isothermal reactions over Pd/ZrO2 catalysts by simple reduction/re-oxidation treatment. The catalytic activity increased during the initial stages of isothermal reaction, and the light-off temperature was lowered as the number of cycles increased in the cyclic temperature-programmed reaction. To reveal the origin of activation, variations in the reduction properties after the activation period were carefully investigated through CH4 temperature-programmed reduction (TPR) measurements. From the CH4-TPR results, it was confirmed that the reduction temperature decreased significantly after activation. The observation of the CH4-TPR peak at relatively low temperatures is directly proportional to the catalytic activity of CH4 combustion. It was therefore concluded that repeated reduction/re-oxidation occurred in the reactant stream, and this phenomenon allowed the combustion reaction to proceed more easily at lower temperatures.

In a recent paper, we have shown how gravity and information can be related. The relation is based on the thermodynamic extension of the gravitational system under consideration using the holographic principle. Using this idea, we were able to derive the Gullstrand-Painlevé (GP) metric. In this short paper, we re-derive the GP metric using information. However, we now extend the spacetime to 5D with the fifth dimension being time, that is, the (3+1)D spacetime is now promoted to (3+1+1)D spacetime. We also comment on the possible Braneworld interpretation of this model.

The issue of monitoring and early warning of rock instability has received increasing critical attention in the study of rock engineering. To investigate the damage evolution process of granite under triaxial compression tests, acoustic emission (AE) tests were performed simultaneously. This study firstly introduced two novel parameters, i.e., the coefficient of variation (CoV) of the information entropy and correlation dimension of the amplitude data from the AE tests, to identify the precursor of the failure of granite. Then the relationship between the changes in these parameters and the stress-time curve was compared and analyzed. The results of this study show that: (1) There is a strong correlation between the CoV of the information entropy and the failure process of granite. The granite failed when the CoV curve raised to a plateau. (2) The fluctuation of the correlation dimension indicates the different stages of the loading process, i.e., the initial compaction stage, the linear elastic stage, the yield stage, and the failure stage. Each stage contains a descending and a rising process in the correlation dimension curve, which indicates that this parameter could be used to identify the precursor of the failure as well. (3) The combined analysis of the two can improve the accuracy of rock instability prediction. This study provides new insights into the prediction of rock instability, which has theoretical implications for the stability of subsurface engineering rock masses.

So called Higuchi’s method of fractal dimension estimation is widely used and the term Higuchi’s fractal dimension even occurs in many publications. This paper deals with this method from mathematical point of view. Terms distance and dimension and its basic properties are explained and Higuchi’s dimension according the original source is defined. Definition of Higuchi’s dimension was comparated with mathematical definition of the distance and dimension. It is showed, that the definition of the Higuchi’s dimension does not satisfy axioms of distance and dimension. So called Higuchi’s method and Higuchi’s dimension are mathematically incorrect. Therefore, all results achieved by this method are scientifically unreliable.

In this article, some kinds of triple belongs to metric dimensions are defined. Some classes of graphs in the matter of these kinds, are studied and the relation amid these kinds are considered. The kind of having equivalency amid these notions and some classes of graphs, is obtained. The kind of locating some vertices by some vertices when the number of locating vertices is increased, has the key role to analyze the classes of graphs, general graphs, and graph's parameters.

The direct Cr (VI) reduction process by oxalic acid was conducted and the results showed that the Cr (VI) was efficiently reduced by oxalic acid at high reaction temperature and high dosage of oxalic acid. The reduced product, Cr (III), was easily generated stable complex compounds (Cr(HC2O4)3) with oxalate, which displayed a negative effect on the reduction process. The high reaction temperature and high acidic medium could destroy the stable structure of a complex compound to release oxalate, and facilitate the reduction of Cr (VI). Generally, the present study provided a versatile strategy for Cr (VI) reduction, exhibiting a bright application future for real wastewater treatment.

In this paper, we first report that WO_x contained nanoalloys exhibit stable electrocatalytic performance in alkaline media, though bulk WO₃ are easy to be dissolved in NaOH solutions. Carbon supported oxide-rich Pd-W alloy nanoparticles (PdW/C) with different Pd:W atom ratios were prepared by reduction-oxidation method. Among the catalysts, the oxide-rich Pd0.8W0.2/C (Pd/W = 8:2, atom ratio) exhibits the highest catalytic activity for oxygen reduction reaction. The X-ray photoelectron spectroscopy data shows that ~40% of Pd atoms and ~60% of the W atoms are in their oxides form. The Pd 3d_5/2 peaks in oxide-rich Pd-W nanoalloys are positive shift compared with that of Pd/C, which indicates the electronic structure of Pd is affected by the strong interaction between Pd and W/WO₃. Compare to Pd/C, the onset potential of oxygen reduction reaction at the oxide-rich Pd_0.8W_0.2/C is positive shifted. The current density (mA·mg Pd⁻¹) at the oxide-rich Pd_0.8W_0.2/C is ~1.6 times of that at Pd/C. The oxide-rich Pd_0.8W_0.2/C also exhibits higher catalytic stability than Pd/C, which demonstrate that it is a prospective candidate for the cathode of fuel cells operated with alkaline electrolyte.

(3+1)D quantum mechanics is a four-dimensional quantum formalism, which is developed neither in a Minkowski spacetime, nor in a purely Hilbert space and not its metric is Lorentzian. This quantum mechanics also yields the quantum Einstein field equation in (3+1)D quantum spacetime. Every observable (3+1)D quantum spacetime can be found to contain internally hidden opposite spin quantum state, that results Supersymmetry. Closed continuous mappings of this hidden quantum state immediately yield more extra hidden dimensions including string. This string is found to be fundamentally eleven-dimensional (rather than lower dimensional) by nature within this quantum spacetime, which is necessarily a natural phenomenon of (3+1)D Quantum Mechanics.

Suppose set

The holographic principle states that the information about the volume of space is stored on its boundary. Assuming this holds, we can explain the aspects of gravity. The spacetime needs to be extended to 5D to explain gravity in this context. This naturally explains the four classical tests of gravity namely the gravitational redshift, the perihelion precession, the bending of light, and the gravitational time delay. We also show a novel way in which the universe expands in an accelerated manner at late times without the need for any form of dark energy.

I want to find an extension of the Hausdorff Measure and Fractal Measure which allows me to compute a unique, satisfying average for functions defined on non-fractal, measurable sets in the sense of Carathedory which has no gauge function.

Chilean geography is highly variable, not only from a climatic and hydrological point of view, but also a morphological one, showing unpredictable natural patterns with marked contrasts throughout the country, for which sometimes it is considered as a "crazy" geography. In this paper we have investigated this apparent disorganized character by exploring the fractal properties of fluvial networks extracted from basins distributed across the continental territory. Analytical and semi-empirical methods were applied, finding striking patterns of organization in the distributions of Horton parameters and the fractal dimension of the drainage networks. Fractal dimension reveals to be quite dependent on the drainage area of each unit, showing clear groupings by tectonic and climatological factors. Such dimension reveals to be an important geomorphic parameter, if not the only one able to capture the real morphology of a fluvial network. From our results and despite the diversity of landforms, hydrological, climatic and tectonic conditions, Chilean’s geography is perhaps not as crazy and disorganized as believed.

Whether resurfacing or not resurfacing the patella during total knee arthroplasty (TKA) still is a challenge to orthopedic surgeons. A significant reason for this controversy is the far from perfect outcomes of both techniques, resulting from inadequate knowledge of normal patellar dimensions in a diseased one. The primary purpose of the current study is to find the pre-diseased patellar dimensions and the ethnic differences in patellar dimensions. We measured the patella's dimensions on 927 normal young adult knee MRIs from seven different ethnicities. Besides comparing the dimensions between sexes, ages, and sides, we analyzed the differences among ethnic groups. The average thickness was 25.12±2.33 mm; the average width was 44.57±4.32 mm, the average articular surface length was 32.69±3.75 mm, with significant gender, age, and ethnic differences. There were also significant differences in dimensions among ethnic groups, except for between the Indians and Far Eastern Asians and between the Arabs and North Africans. We could also find a robust mathematical relationship between the patella's width, length, and thickness. The ethnic differences in patellar dimensions found in this study can help optimize surgical technique and implant designs for patellar resurfacing. The mathematical equation will help the surgeons find the normal, pre-diseased patella thickness to prevent over-or under-stuffing during the patellar resurfacing.

The data from social networks like Twitter is a valuable source for research but full of redundancy, making it hard to provide large-scale, self-contained, and small datasets. The data recording is a common problem in social media-based studies and could be standardized. Sadly, this is hardly done. This paper reports on lessons learned from a long-term evaluation study recording the complete public sample of the German and English Twitter stream. It presents a recording solution proposal that merely chunks a linear stream of events to reduce redundancy. If events are observed multiple times within the time-span of a chunk, only the latest observation is written to the chunk. A 10 Gigabyte Twitter raw dataset covering 1,2 Million Tweets of 120.000 users recorded between June and September 2017 was used to analyze expectable compression rates. It turned out that resulting datasets need only between 10\% and 20\% of the original data size without losing any event, metadata or the relationships between single events. This kind of redundancy reduction recording makes it possible to curate large-scale (even nation-wide), self-contained, and small datasets of social networks for research in a standardized and reproducible manner.

Drafting formations have been long recognized as highly effective for reducing drag and enhancing athletic performance, particularly in race walking events. The precise spacing and positioning of the race walkers are critical to optimizing the effectiveness of drafting. In this study, the drag reduction of 15 drafting formations is investigated using wind-tunnel experiments and CFD numerical simulations. The results show excellent consistency in drag reduction rate between the two methods, with differences being within 10%. This can be attributed to spacing replacing body shape differences as the primary factor influencing drag reduction. Optimal double, triple, and quadruple drafting formations produce the same results in both wind-tunnel experiments and CFD simulation, resulting in drag reductions of 67%, 66%, and 81% (wind-tunnel) and 65%, 72%, and 85% (CFD). The sources of drag differences in the two methods are discussed from various aspects. The flow field obtained through CFD analysis is used to examine the mechanism of drag reduction, revealing that drafting formations have a significant shielding effect on incoming air, which reduces the number and speed of airflow impacting the core race walker. This shielding effect is identified as the primary cause of drag reduction. Using an empirical model for mechanical power output, optimal double, triple, and quadruple drafting formations enhance sport economy (4.4-5.7%), speed (3.61-4.67%), and performance (173.8-223.3s) compared to race walking alone. The findings can serve as a reference for race walkers' positioning strategy and provide insights for considering drafting formations in various running events.

Entropy as a mathematical concept is the first of its own kind, and second to none. Barely one or two papers in literature have investigated fractal dimensions of very basic entropies, such as Shannon, Tsallis, and Rényi entropic expressions. This was a thoughtful inspiration to delve into a step forward towards a unified information- theoretic fractal theory. The storytelling of this current paper starts by introducing my third entropy formula, namely Ismail’s entropy, , as a novel generalization to Shannonian entropy with a visionary link to both long- and short-range interactions, (LRIs), (SRIs) respectively. Clearly, this would generate a fourfold unification with statistical mechanics as well as contemporary physics. Hence, this adds more credibility and weight for this study. The fractal dimension of , is identified in this paper. As an essential part of this work, it was influential to spotlight the importance of fractal geometry to space industry as well as education, which is crucial to develop our societies. Thus, some potential fractal applications to CubeSat Technologies and Education are highlighted. So, will the deep search for more ground-breaking research has come to an end. Certainly, not. This was another inspiration to propose new open problems to widen research gates to the scientific community for more research pathways. Consequently, the paper ends with closing remarks combined with some challenging open problems and the next phase of research.

Dark energy and dark matter are described as different manifestations of vacuum energy using a newly developed framework of Extra Dimensional Symmetry (EDS) that doubles large spatial dimensions with microscopic partners. In this framework, the bare vacuum energy component exists in a gravitationally dark state where actual gravitational constant G_o = 0G, while real particles oscillate between this inert state and an active state where G_o = 2G. A small component of vacuum energy is constrained to exist in the gravitationally active state as dark energy due to energy density constraint and speed limit asymmetry determined by an asymmetry parameter . Furthermore, neutrinos induce small component of the gravitational constant in the dark state within a volume of space described by the wavelength, enabling the gravitation of virtual particles which manifests as dark matter. The resulting has oscillating light and heavy terms. The heavy term is usually inactive due to its suppression by negative pressure and becomes active for a lifetime once shear stress exceeds negative pressure threshold. This results in a light form of dark matter and a heavy form of dark matter that is detectable through its increased gravitational interaction and resulting acceleration.

The establishment of an isolation layer in submarine mining has long presented an enduring challenge. In the context of this research, we conducted a similarity simulation test to preliminarily ascertain the interplay between the thickness and extent of the isolation layer. Subsequently, we introduce an innovative approach that integrates fractal theory and the bonded block model (BBM) to simulate undersea isolation layer mining. The validation of this method hinges on on-site borehole scanning and displacement monitoring, which serve to depict the intricate fractal evolution of fractures and predict the optimal thickness of the isolation layer. Our findings affirm the robustness and validity of this method. Evaluation of the fractal dimensions of fractures reveals that a critical threshold of 1.7 exists to prevent structural failure of the isolation layer, while a limit of 1.5 is necessary to avert significant water ingress. Remarkably, the correlation dimension of the settlement time series closely aligns with the fractal dimension of the fractures, underscoring the feasibility of ensuring the safety of isolation layer mining through real-time settlement monitoring.

The fractal dimension of geomagnetic variations at the Baigazan magnetic station at Russian Altay for 2011-2013 was calculated using the Higuchi method. The daily variation of Higuchi Fractal Dimension (HFD) for the D,H,Z-components of the geomagnetic field has been investigated, its contribution to the variability of HFD is from 30 to 40 percent of the total variance. A correlation analysis of the fractal dimension of the variations of the D,H,Z-components with Auroral Electrojet (AE) index and solar wind characteristics was carried out. A negative correlations with logarithms of AE-index, interplanetary magnetic field (IMF) strength and solar wind velocity were found. About 25 percent of the fractal dimension variance is controlled by the variability of these characteristics. Pair and partial correlation coefficients for these parameters were calculated for every month of 2011-2013.

Low-dimensional carbon-based (LDC) materials have attracted extensive research attentions in electrocatalysis because of their unique advantages such as structural diversity, low cost, and chemical tolerance. They have been widely used in a broad range of electrochemical reactions to relief environmental pollution and energy crisis. Typical examples include hydrogen evolution reaction (HER), oxygen evolution reaction (OER), oxygen reduction reaction (ORR), carbon dioxide reduction reaction (CO₂RR), and nitrogen reduction reaction (NRR). Traditional “trial and error” strategies seriously slowed down the rational design of electrocatalysts for these important applications. Recent studies show that the combination of density functional theory (DFT) calculations and experimental research is capable of accurately predicting the structures of electrocatalysts, thus could reveal the catalytic mechanisms. Herein, current well-recognized collaboration methods of theory and practice are reviewed. The history of modern DFT, commonly used calculation methods, and basic functionals are briefly summarized. Special attention is paid to descriptors that are widely accepted as a bridge links the structure and activity, and the breakthroughs for high-volume accurate prediction of electrocatalysts. Importantly, correlating multiple descriptors are used to systematically describe the complicated interfacial electrocatalytic processes of LDC catalysts. In addition, machine learning and high-throughput simulations are crucial in assisting the discovery of new multiple descriptors and reaction mechanisms. This review will guide the further development of LDC electrocatalysts for extended applications from the aspect of DFT computations.

Suitable soil structure and nutrient security are important for plant growth and development, characteristics of soil fractal dimension and distribution of physical and chemical properties and their interactions play an important role in studying the stability of soil structure and water and fertilizer cycles. As a sustainable management model, intercropping has positive benefits for erosion control, spatial optimization of resources, as well as improving system productivity. The effects of four intercropping methods on soil fractal dimension and physicochemical properties were investigated by intercropping Salvia miltiorrhiza with forage and S. miltiorrhiza with forest under typical karst rock desertification habitats in Guizhou. The results showed that soil nutrient content of intercropping was significantly higher than that of monoculture, the organic carbon content of soil grown under forest is higher than other treatments, and there was a non-significant change in soil water content of intercropping compared with monoculture. The soil fine-grained matter of intercropping was significantly higher than that of monoculture, while the soil fractal dimension showed a tendency to become larger with the increase of fine-grained matter. The intercropping planting, due to its component types and spatial and temporal configurations, leads to differences in soil water and fertilizer interactions, which can be combined with other ecological restoration measures to optimize the composite model and jointly promote the restoration and development of ecologically fragile areas.

We establish a Gröbner-Shirshov bases theory for trialgebras and show that every ideal of a free trialgebra has a unique reduced Gröbner-Shirshov basis. As applications, we give a method for the construction of normal forms of elements of an arbitrary trisemigroup, in particular, A.V. Zhuchok’s (2019) normal forms of the free commutative trisemigroups are rediscovered and some normal forms of the free abelian trisemigroups are first constructed. Moreover, the Gelfand-Kirillov dimension of finitely generated free commutative trialgebra and free abelian trialgebra are calculated respectively.

In 2020, the pandemic caused by the Coronaviruses (CoV) that are a large family of viruses that cause illness ranging from the common cold to more severe diseases such as Middle East Respiratory Syndrome (MERS-CoV) and Severe Acute Respiratory Syndrome (SARS-CoV2). The Coronavirus disease (COVID-19) is a new strain that was discovered in 2019 and has not been previously identified in humans. It is the high time to investigate the quantitative and/or qualitative genomic informations of the virus SARS-CoV2 in order to strengthen the healthcare facility to fight against this viral disease. In this article, a through quantitative understanding of the purine and pyrimidine spatial distribution/organization of all 89 complete sequences of SARS-CoV (available as on date in the NCBI virus database, is made using different parameters such as fractal dimension, Hurst exponent, Shannon entropy and GC content of the nucleotide sequences of the genome of SARS-CoV2. Also a cluster among all the the SARS-CoV sequences of nucleotide have been made based on their phylogeny made through their closeness (Hamming distance) based on respective purine-pyrimidine distribution.

Consider a robot that is navigating in a space modeled by a graph, and that wants to know its current location. It can send a signal to determine how far it is from each landmark among a set of fixed landmarks. We study the problem of computing the minimum required number of landmarks, and where they should be placed so that the robot can always determine its location. Since the problem is an NP-complete problem, the robot's responses to the actions are slow. To accelerate this response, we can use the parallel version of this problem. In this work, we introduce a new parallel implementation for determining the metric dimension of a given graph. We run the proposed algorithm on a symmetric multi-processing (SMP) cluster using C programming language and the Message Passing Interface (MPI) library. Finally, we run our implementation on four categories of graphs (the tracks in which the robot moves): a cycle graph Cn, a path graph Pn, a triangular snake graph and a ladder graph Ln. Preliminary computational results indicate that the metric dimension problem is an NP-complete problem and prove the ability of the proposed algorithm to achieve a speedup of 6 for 8 processors.

Despite providing some critical financial services to support the operation of Emissions Trading Systems (ETS), such as increasing market liquidity and price visibility and allowing operators to hedge against future fluctuations, there is growing concern about the potential threat of financial actors' speculation behaviour to the ETS's effectiveness. To confirm or alleviate the fear associated with such concern, we employ both ex-post and ex-ante approaches to determine the role of speculation in the emission reduction effect of the ETS and its forecasting power in predicting climate change. In addition to confirming carbon prices and the speculation behaviour of the emissions non-compliance actors in the ETS as accurate predictors of climate change, we also show that they both matter in the emission reduction effect of the ETS. We use several verifiable econometric approaches to select the Feasible Quasi Generalised Least Squares (FQGLS) as the best estimator for addressing some of the biases in climate change predictability. We demonstrate that a predictive model combining the complementing dynamics of the EST emissions compliance and emissions non-compliance features forecasts climate change more accurately. We demonstrate the robustness of our findings for both in-sample and out-of-sample forecasts and across different forecast horizons by using alternative approaches to evaluate forecast performance.

In today's society, mankind is confronted with two major problems: the energy crisis and the greenhouse effect. The artificial photosynthesis can use solar energy to convert greenhouse gas CO2 into high-value compounds, which is an ideal solution to alleviate the energy crisis and solve the problem of global warming. The combination of ZnO and polythiophenes (PTh) can make up for each other's drawbacks, thus improving the photoresponse behavior and separation efficiency of photogenerated carriers. PTh layer can transfer photogenerated electrons to ZnO, thereby extending the lifetime of photogenerated charges. The production rate of CH4 from photoreduction of CO2 with ZnO/PTh10 is 4.3 times that of pure ZnO, and the selectivity of CH4 is increased from 70.2% to 92.2%. The conductive PTh can absorb photons to induce π–π* transition, the photogenerated electrons can transfer from LUMO to the conduction band (CB) of ZnO, thus more electrons involve in the reduction of CO2.

Human perception of nature and God have always been inextricably linked. In order to understand nature and its inherent processes, including various natural hazards, the reasons for their origin were often attributed to God's will, suffering for sin and the similar. Fear of material and human losses prompted a man to pray and offer sacrifices/gifts and other rituals to appease the "wrath of the gods". The progress of civilization and technology has not alleviated the destruction and trauma that natural disasters inflict on all aspects of social life. A major obstacle to this is the exponential population growth in vulnerable areas. The frequency of natural disasters and the fatalistic attitudes that limit the effective fight against them have motivated religious communities and individuals to cooperate with international and international organizations and institutions to reduce the risk of local disasters. Believers thus receive the necessary psychological and financial assistance and support from religious communities during all phases of disaster management. Therefore, the subject of this paper is a comprehensive examination relationship between the degree of religiosity of the population and how this connection impacts the policy of reducing disaster risk. The aim of the research is to scientifically describe the nature of the relationship between the degree of religiosity of citizens and different segments of disaster risk reduction.

The validity of our universe as a three-dimensional space (3+1 in relativity) is considered a fundamental fact in physics. In this study, we show that our observed world is thus the output of a prior fundamental operator referred to as an organizer. The organizer is an expansion of projecting operators. It is been shown that identical weighted projecting operators, which are associated with identical particles, generate subspaces of entangled states, whereas groups of unequal weighted coefficients are responsible for finite-size subspaces that are associated with unidentical particles. Considering 3D-subspaces as evidence of the coefficients’ arrangement in our universe, we implement our formalism to describe the implacable vectors, location, momentum, and force within each 3D subspace. By implementing the Heisenberg relation, we drive both the classical and quantum expressions for the laws of motion.

Quantum mechanics introduces the concept of an observer who selects a measuring device and reads the outputs. This measurement process is irreversible. Lately, scholars on quantum collapse phenomena have presented a quantum-like formalism describing the measurement results as an interpretation of the measured object. Note that an observer must read the interpretation results after the interpretation process. Therefore, we propose that the definition of the concept of life should be expanded based on the following concept: A living system decreases entropy, measured results are interpreted, and an internal observer reads the commentary.

This work discussed the advantages of reducing copper in molten copper slag with low S content. FactSage calculated the distribution of copper at equilibrium under different sulfur content. The effect of sulfur content on copper recovery under different oxygen partial pressures was pointed out. The effect of sulfur content on copper recovery in the actual reduction process was explored through experimental research. Under the condition of low sulfur, the Recovery of copper and the stability of the experiment have an ideal results.

The current paper is devoted to the introduction of simpler Eulerian variational principles from which all the relevant equations of non-barotropic stationary magnetohydrodynamics can be derived for magnetic fields which lie on surfaces. A variational principle is given in terms of three independent variables for stationary non-barotropic magnetohydrodynamic flows. This is a smaller number of variables than the eight variables which appear in the standard equations of non-barotropic magnetohydrodynamics which are the magnetic field, the velocity field, the specific entropy and the density. We further investigate the case in which the flow along magnetic lines is not ideal.

A highly efficient reduction process of Cr (VI) with biochar was conducted in this paper. The results showed that nearly 100% Cr (VI) was reduced at selected reaction conditions: the dosage of biochar at m (C)/m(Cr) = 3.0, reaction temperature of 90 ℃, reaction time at 60 min and concentration of H2SO4 of 20 g/L, respectively. The reduction kinetics analysis demonstrated that the reduction of Cr (VI) fitted well with the pseudo-first-order model and the apparent activation energy was calculated to 40.24 kJ/mol. Response surface methodology confirmed that all the experimental parameters had positive effect on the reduction of Cr (VI). The influence of each parameter on the reduction process followed the order: dosage of biochar> Concentration of H2SO4 > Reaction Temperature > Reaction Time. This paper provided a versatile strategy for treatment of wastewater containing Cr (VI) and showed a bright tomorrow for wastewater treatment.

Microbe laden air particles, known as bio-aerosols, are routinely generated, in clinical dentistry due to the operative instrumentation within a milieu rich in salivary organisms. As the major mode of transmission of SARS-CoV-2 appears to be airborne aerosols and droplets, there has been an intense focus on such aerosol generating procedures (AGP). As there has been no systematic reviews on the efficacy of bio-aerosol reducing measure in dentistry, the objective of this systematic review was to evaluate the literature on three major AGPs, rubber dam application, pre-procedural oral rinse, and high-volume evacuation (HVE) aimed at reducing dental bio-aerosols. Method: PubMed via Ovid MEDLINE, EBSCO host, Cochrane Library, and Web of Science databases between January 01, 1985, and April 30, 2020, were searched.Results: A total of 156 records in the English language literature were identified, of which 17 clinical studies with 724 patients were included in the final analyses. The eligible reviewed articles revealed the inadequacy of the afore mentioned three principal AGPs used in contemporary dental practice to minimise bio-aerosols. HVE appears to be the most efficacious method, although no single approach provides total elimination of bio-aerosols. Conclusion:This, the first systematic review on methods of controlling bio-aerosols in dental operatory settings, indicates that employing combination strategies of rubber dam, with a pre-procedural antimicrobial oral rinse, and HVE can significantly minimize bio-aerosols. As the quality of the currently available data on dental bio-aerosols are rather poor, further, controlled, multi-centre studies are essential to address this critical issue.

This study purposes the use of plug-in electric vehicles for demand side management (DSM) considering uncertainties in demand as well as uncertainties due to mobility of PEV to mitigate peak demand. The solution also seeks to reduce electric cost in addition to reducing the effects of greenhouse gases. In recent years DSM using distributed storage system such as battery energy management system (BESS) and plugged-in electric vehicles (PEV) have become very prevalent with most implementations resorting to deterministic load forecast. These methods do not consider the potential growth in demand making their solutions less robust. In this study we propose a real-time density demand forecast and stochastic optimization for robust operation of PEV for a building. This method accounts for demand uncertainties in addition to uncertainties in mobile energy storage as found in PEV, making the resulting solution robust as compared to the deterministic case. A case study on a real site in South Korea is used for verification and testing. The proposed study is verified and tested against existing algorithms. The result verifies the effectiveness of the proposed approach

Replacing carbon by hydrogen is a huge step towards reducing CO₂ emissions in the iron- and steel-making industry. The reduction of iron oxides using hydrogen plasma smelting reduction as an alternative to conventional steel-making routes has been studied at Montanuniversitaet Leoben, Austria. The aim of this work was to study the slag formation during the reduction process and the reduction behaviour of iron oxides. Furthermore, the reduction behaviour of iron ore during continuous feeding was assessed. Mixtures of iron ore and calcined lime with a basicity of 0, 0.8, 1.6, 2.3, and 2.9 were melted and reduced by hydrogen. The off-gas composition was measured during the operations to calculate the process parameters. The reduction parameters, namely the degree of reduction, degree of hydrogen utilisation, produced iron, and slag, are presented. The results of the batch-charged experiments showed that at the beginning of the reduction process, the degree of hydrogen utilisation was high, and then, it decreased over the operation time. In contrast, during the continuous-feeding experiment, the degree of hydrogen utilisation could be kept approximately constant. The highest degrees of reduction and hydrogen utilisation were obtained upon the application of a slag with a basicity of 2.3. The experiment showed that upon the continuous feeding of iron ore, the best conditions for the reduction process using hydrogen could be applied.

A single paragraph of about 200 words maximum. For research articles, abstracts should give a pertinent overview of the work. We strongly encourage authors to use the following style of structured abstracts, but without headings: (1) Background: Place the question addressed in a broad context and highlight the purpose of the study; (2) Methods: briefly describe the main methods or treatments applied; (3) Results: summarize the article’s main findings; (4) Conclusions: indicate the main conclusions or interpretations. The abstract should be an objective representation of the article and it must not contain results that are not presented and substantiated in the main text and should not exaggerate the main conclusions. This study presents a comprehensive literature review on the convergence of affective computing, interactive installation art, multi-dimensional sensory stimulation, and artificial intelligence (AI) in measuring emotional responses. It addresses the problem of understanding emotional response and measurement in the context of interactive installation art under artificial intelligence (AI). The study aims to fill the existing research gaps by examining three key aspects: sensory stimulation, multi-dimensional interactions, and engagement, which have been identified as significant contributors to profound emotional responses in interactive installation art. The study proposed approach involves conducting a process analysis of emotional responses to interactive installation art, aiming to develop a conceptual framework that explores the variables influencing emotional responses. The study will formulate hypotheses that make specific predictions about the relationships between sensory stimulation, multi-dimensional interactions, engagement, and emotional responses. By employing the ASSURE model combined with experimental design, the research methodology ensures a systematic and comprehensive study implementation. The implications of this project lie in advancing the understanding of emotional experiences in interactive installation art under AI, providing insights into the underlying mechanisms that drive these experiences. The contributions of this research include bridging the identified research gaps, refining theoretical frameworks, and guiding the design of more impactful and emotionally resonant interactive artworks. Ultimately, this research aims to contribute to the broader field of human-computer interaction and enhance the development of immersive and emotionally engaging interactive installations.

(1) Background: Breast cancer is the second leading cause of cancer death among women. The accurate prediction of survival intervals will help physicians make informed decisions on treatment strategies or the use of palliative care for patients; (2) Methods: The gene expression is predictive and correlates to patient prognosis. To establish a reliable prediction tool, we collected the RNA-seq data of breast cancer patients, a total of 1187 RNA-seq data (median age 58 years), in FPKM format from the TCGA database. Among them, 144 RNA-seq data with date of death information was selected to establish the SaBrcada-AD dataset. We first normalized the SaBrcada-AD dataset to transcripts per million (TPM) to build survival prediction model SaBrcada. After normalization and dimension raising, the differential gene expression data were used for testing eight different deep learning architectures. Among them, GoogLeNet performed the best. Considering the effect of age on prognosis, we examined all ages between the lower and upper quartiles of patient age for a stratified random sampling test; (3) Results: Stratifying by age based on a cut-off of 61 years of age improved the accuracy of SaBrcada compared to previous findings, resulting in an accuracy of 0.798. We also built a free website tool to provide 5 kinds of predicted survival period information for clinician reference; (4) Conclusions: We established a breast cancer survival analysis prediction model, SaBrcada, and a website tool with the same name. Through this highly reliable survival analysis model and website tool, information on survival intervals will be provided for clinicians as part of precision medicine.

With the rise of Internet of Things (IoT) devices and Cyber-Physical Systems, the demand for more functional and high-quality software has increased tremendously. To meet this need, we must reengineer and reuse existing software, as well as develop new software formal verification methods. One such method is based on physical quantities defined by the System International, which have physical dimensions. The homogeneity of physical dimensions in software code enables us to check the software code in the space of base units, making it the first basis of the new software verification method. However, this method cannot check expressions with angles, angle speed, and other similar features. To address this, a transformation for physical value orientation introduced by Siano allows us to check software code for orientational, stabilization, and other related branches. This makes the orientational homogeneity the second basis of the new software verification method. To assess the effectiveness of the proposed method, we developed special software defect models based on the statistical characteristics of software code. We used a special statistical analysis tool to define the statistical characteristics of modern software and analyzed over 2 GB of C++ GITHUB code for drones. Based on the actual distribution of software characteristics, the proposed method can detect over 60% of latent software defects. Implementing this method can significantly reduce testing time, improve reliability, and enhance overall software quality.

As paradigm of complex behavior, multifractals describe the underlying geometry of self-similar objects or processes. Building on the connection between entropy and multifractals, we show here that the generalized dimension of geodesic trajectories in General Relativity coincides with the four-dimensionality of classical spacetime.

The development of hydrogen plasma smelting reduction as a CO₂ emission-free steel-making process is a promising approach. This study presents a concept of the reduction of hematite using hydrogen thermal plasma. A laboratory scale and pilot scale hydrogen plasma smelting reduction (HPSR) process are introduced. To assess the reduction behavior of hematite, a series of experiments has been conducted and the main parameters of the reduction behavior, namely the degree of hydrogen utilization, degree of reduction and the reduction rate are discussed. The thermodynamic aspect of the hematite reduction is considered and the pertinent calculations have been carried out using FactSage^TM 7.2. The degree of hydrogen utilization and the degree of reduction were calculated using the off-gas chemical composition. The contribution of carbon, introduced from the graphite electrode, ignition pin and steel crucible, to the reduction reactions was studied. The degree of reduction of hematite, regarding H₂O, CO and CO₂ as the gaseous reduction products, is determined. It is shown that the degree of hydrogen utilization and the reduction rate were high at the beginning of the experiments, then decreased during the reduction process owing to the diminishing of iron oxide. Conducting experiments with the high basicity of slag B₂=2 led to a decrease of the phosphorus concentration in the produced iron.

Breast cancer is the most prevalent malignancy among women globally. Early diagnosis and treatment improvements are leading to a growing population of survivors. This has increased the risk of developing contralateral breast cancer (CBC), a distinct occurrence in the opposite breast of a previously diagnosed patient. The treatment options for breast cancer are often mas-tectomy or lumpectomy. Patients with lumpectomy frequently undergo a contralateral reduc-tion procedure to achieve more symmetry after the primary breast cancer surgery. The reduc-tion specimen is usually routinely examined by pathology to check for malignancies. The exci-sion in pieces and the absence of specific markers or ink make an examination of tumor size and margin status more challenging, impacting treatment decisions. A new protocol introduced in July 2022 seeks to improve diagnostic precision and treatment planning by excision in toto, marking, and inking excised reduction tissue to examine and treat potential CBC more effectively.

Four different Mn and Re catalysts for electrochemical CO2 reduction have been studied by IR spectroelectrochemistry (SEC) in dry acetonitrile. In the case of Mn(apbpy)(CO)3Br (apbpy= 4(4-aminophenyl)-2,2’-bipyridine) SEC suggests that a very slow catalytic reduction of CO2 occurs in acetonitrile also in the absence of proton donors, but at rather negative potentials. On the contrary, the corresponding Re(apbpy)(CO)3Br clearly displays a slow catalytic conversion already at the first reduction potential. Switching to saturated CO2 solutions in a mixture of acetonitrile and 5% of water as proton donor, the SEC of Mn(apbpy)(CO)3Br displays faster catalytic behavior.

Parametric models have been widely used in pertinent literature for reconstructing, modifying and representing a wide range of airfoil and/or hydrofoil profile geometries. Design spaces corresponding to these models can be exploited for modeling and profile-shape optimization under various performance criteria. Accuracy requirements, along with the need for modeling local features, often lead to high-dimensional design spaces that hinder the process of shape optimization and design through analysis. In this work, we propose a shape-informed dimensional reduction approach that attempts to tackle this deficiency by producing low-dimensional latent design spaces that can be efficiently used in shape representation and optimization. Furthermore, geometric moments are introduced in an attempt to cost-effectively capture analysis-relevant information that is generally expensive to produce. Specifically, geometric integral properties, although intrinsic features of the shape, are quite commonly related to performance indicators employed in performance optimization and therefore provide a cost-effective physics-informed component in the description of the design in the latent space. To this end, we employ the generalized Karhunen-Loeve expansion to produce a shape- and physics-informed subspace retaining the highest possible geometric variance and robustness, that is, lack of invalid designs. At the same time, a series of shape discretizations, encoding the foil's shape profile, are examined with regards to their effect on the resulting latent space's quality and efficiency. Our results demonstrate a significant reduction in the dimensionality of the original design space while maintaining a high representational capacity and a large percentage of valid geometries that facilitate fast convergence to optimal solutions in performance-based optimization.

Emerging infectious disease threats are becoming more frequent due to various social, political and geographical pressures including increased human-animal contact, global trade, transportation and changing climate conditions. As a result, the threat that emerging agents can be spread by blood contact or transfusion of blood products also becomes increasingly problematic. Blood transfusion is essential in treating patients with anemia, blood loss, and other medical conditions. However, these lifesaving components can become a vector for spreading diseases, particularly to vulnerable populations. New methods have been implemented on a global basis for prevention of transfusion transmission via plasma, platelet, and whole blood products. Implementing proactive pathogen reduction methods can significantly reduce the likelihood of disease transmission via blood transfusion, even for newly emerging agents whose transmissibility and susceptibility are still being evaluated as they emerge. In this review, we consider the Mirasol PRT system for blood safety which is based on a photochemical method involving Riboflavin and UV light. We provide examples of how emerging threats such as Ebola, SARS-CoV-2, Hepatitis E, monkeypox and other agents have been evaluated in real time regarding effectiveness of this method for reducing the likelihood of disease transmission via transfusion. Keywords: transfusion; blood; pathogen reduction; emerging infectious diseases.

The rapid development of electrochemical CO2 reduction offers a promising route to convert in-termittent renewable energy into products of high value-added fuels or chemical feedstocks. However, low faradaic efficiency, low current density, and a narrow potential range still limited the large-scale application of CO2RR electrocatalyst. Herein, monolith 3D bi-continuous nano-porous Bismuth (np-Bi) electrodes are fabricated via a simple one-step electrochemical dealloying strategy from Pb-Bi binary alloy. The unique bi-continuous porous structure ensures highly effective charge transfer, meanwhile the controllable millimeter-size geometric porous structure enables easy catalyst adjustment to expose highly suitable surface curvatures with abundant reactive sites. This results in a high selectivity of 92.6% and superior potential window (400 mV, selectivity >88%) for electrochemical reduction of carbon dioxide to formate. Our scalable strategy provides a feasible pathway for mass-producing high-performance and versatile CO2 electrocatalysts.

Given a polynomial $P(x_{1}, x_{2}, \ldots, x_{n})$ which is the sum of terms, where each term is a product of two distinct variables, then the problem $APSS$ consists in calculating the total sum value of $\sum_{\forall U_{i}} P(u_{1}, u_{2}, \ldots, u_{n})$, for all the possible assignments $U_{i} = \{u_{1}, u_{2}, ... u_{n}\}$ to the variables such that $u_{j} \in \{0, 1\}$. $APSS$ is the abbreviation for the problem name Algebraic Polynomial Sum Solver Over $\{0, 1\}$. We show that $APSS$ is in $\#L$ and therefore, it is in $FP$ as well. The functional polynomial time solution was implemented with Scala in \url{https://github.com/frankvegadelgado/sat} using the DIMACS format for the formulas in $\textit{MONOTONE-2SAT}$.

Abstract: The paper defines the characteristics of two proto-quark stars (M_b=1.22M_? and M_b=1.62M_(?"\ " )) that were formed after the explosion of the supernova. It is assumed that the changes in the energy and lepton charge of the central regions of the pre-supernova star can be neglected during the implosion. The equation of state for hot quark matter is determined based on the MIT bag theory taking into account the presence of neutrinos. The possible maximum values of the central temperatures of these stars are determined. The energy of neutrinos in the studied proto-quark stars is of the order of 250-300 MeV. The decrease in the mass of these stars during cooling is about 0.16 for M_b=1.22M_? and 0.25 for M_b=1.62M_(?"\ " ).

Background: Twitter is a major tool for communication in emergencies such as natural disasters. This online social network allows the user to produce content, and it is not designed exclusively for news releases, as opposed to other service providers. Aim: The aim of this study is to investigate Twitter uses in natural disasters and pandemics. Methods: The included studies reported the role of Twitter in natural disasters. The studies that report in settings other than the natural disasters (such as man-made disasters) and other social media were excluded. Electronic databases for a comprehensive literature search including MEDLINE, Web of Science, CINAHL, PsycINFO, Cochrane Register of Controlled Trials (CENTRAL) and EMBASE were used to identify the records that match the mentioned inclusion criteria published till May 2020. The study characteristics were extracted from the qualified studies including year of publication, findings, and geographical location of the study conduct. A narrative synthesis for this literature review was used. Results: The search identified 822 articles of which 780 articles were removed, 256 were not available, 311 papers were not relevant, 16 were duplicated articles, and 197 were non-related to the emergencies. 45 articles met the selection criteria and were included in the review. eleven themes were found in the narrative synthesis including early warning, disseminating information and misinformation, advocacy, personal gains, assessment, various roles of organizations, public mood, geographical analysis, charity, using influencers, and trust. Conclusions: It is recommended that influential individuals be identified in each country and community before disasters occur so that the necessary information can be disseminated in response to disasters. Preventing the spread of misinformation is one of the most important issues in times of disaster, especially pandemics. Disseminating accurate, transparent, and prompt information from relief organizations and governments can help. Also, analyzing Twitter data can be a good source for understanding the mental state of the community, estimating the number of injured people, estimating the points affected by natural disasters, and modeling the prevalence of epidemics. Therefore, various groups such as politicians, the government, non-governmental organizations, aid workers, and the health system can use this information to plan and implement interventions.

With an increasing demand for quality of care and lower costs, hospitals are looking for industry-based methods to improve efficiency in their processes. This study aims to reduce waste in a public hospital in Mexico by improving the medical supply process for the operating room. To this end, a lean healthcare (LH) implementation following the DMAIC approach (Define-Measure-Analyze-Improve-Control) is carried out. We analyze the value stream of the supply process, including main surgical procedures and their related medical supplies, and identify different causes of inefficiency, which are evaluated and controlled through different tools, including a value stream map, Kanban, and the 5S program. As a result, five types of waste were reduced. Over-processing requests were reduced by 15.3%, defective identification numbers were reduced by 46.5%, redundant processing was improved by 94.8%, near 2.8% of the unnecessary inventory was reduced, and transportation waste was reduced by up to 16.7%. Finally, the lead-time for the main supplies was reduced by 33 days. This work demonstrates that LH and DMAIC are effective in reducing waste and are highly conducive to improving sustainability in healthcare processes. Moreover, it provides practical insights for practitioners regarding the implementation of LH in public hospitals in developing countries.

Changes in the amount and the distribution of mean and turbulent quantities in the free shear layer wake of a 2D NACA 0012 airfoil and AR 4 NACA 0012 wing with passive segmented rigid trailing edge (TE) extensions was investigated at the University of Dayton Low Speed Wind Tunnel (UD-LSWT). The TE extensions were intentionally placed at zero degrees with respect to the chord line to study the effects of segmented extensions without changing the effective angle of attack. Force based experiments was used to determine the total lift coefficient variation of hte wing with seven segmented trailing edge extensions distributed across the span. The segmented trailing edge extensions had negligible effect of lift coefficient but showed measurable decrement in sectional and total drag coefficient. Investigation of turbulent quantities (obtained through Particle Image Velocimetry (PIV)) such as Reynolds stress, streamwise and transverse RMS in the wake, reveal a significant decrease in magnitude when compared to the baseline. The decrease in the magnitude of turbulent parameters was supported by the changes in coherent structures obtained through two-point correlations. Apart from the reduction in drag, the lower turbulent wake generated by the extensions has implications in reducing structural vibrations and acoustic tones.

In this work the influence of the structure forming agent on the composition, morphology and oxygen reduction reaction (ORR) activity of Fe-N-C catalysts was investigated. As structure forming agent (SFA), dicyandiamide (DCDA) (nitrogen source) or oxalic acid (oxygen source) or mixtures thereof were used. For characterization, cyclic voltammetry and rotating disc electrode (RDE) experiments were performed in 0.1 M H2SO4. In addition to this, N2 sorption measurements and Raman spectroscopy were performed for the structural characterization. The role of metal, nitrogen and carbon sources within the synthesis of Fe-N-C catalysts has been pointed out before. Here, we show that the optimum in terms of ORR activity is achieved if both N- and O-containing SFAs are used in almost similar fractions. All catalysts display a redox couple, whereat its position depends on the fractions of SFAs. The SFA has also a strong impact on the morphology: Catalysts that were prepared with a larger fraction of N-containing SFA revealed a higher order in graphitization, indicated by bands in the 2nd order range of the Raman spectra. Nevertheless, the optimum in terms of ORR activity is obtained for the catalyst with highest D/G band ratio. Therefore, the results indicate that the presence of an additional oxygen-containing SFA is beneficial within the preparation.

Jakarta belongs to the cities with the highest flood risk in the world. Its flood hazard is driven by land subsidence, soil sealing, changes in river discharge and increasingly sea level rise. As all of these trends are set to continue, Jakarta’s flood hazard is expected to intensify in the future. Designing and implementing risk reduction and adaption measures is therefore of utmost importance. Against the background, the paper draws on a discourse analysis and original empirical household survey data to review and evaluate current adaptation measures and to analyze in how far they describe a path that is transformative from previous risk reduction approaches. The results show that the focus is clearly on engineering solutions, foremost in the Giant Sea Wall project. The project is likely to transform the city’s flood hydrology. However, it cements rather than transforms the current risk management paradigm which gravitates around the goal of controlling flood symptoms, rather than addressing their anthropogenic root causes. The results also show that the planned measures are heavily contested due to concerns about ecological impacts, social costs, distributional justice, public participation and long-term effectiveness. On the outlook, the results therefore suggest that the more the flood hazard will intensify in the future, the deeper a societal debate will be needed about the desired pathway in flood risk reduction and overall development planning – particularly with regards to the accepted level of transformation, such as partial retreat from the most flood-affected areas.

Nickel molybdate, NiMoO₄, nanoparticles were synthesized via calcination of an oxalate complex in static air at 500 °C. The oxalate complex was analyzed by thermal gravimetric analysis (TGA) and Fourier transform infrared spectroscopy (FTIR). The as-synthesized nickel molybdate was characterized by Brunauer–Emmett–Teller technique (BET), X-ray diffraction (XRD), and transmission electron microscopy (TEM) and its catalytic efficiency was tested in the reduction reaction of the three-nitrophenol isomers. The nickel molybdate displays a very high activity in the catalytic reduction of the nitro functional group to an amino. The reduction progress was controlled using UV-Vis absorption.

Static and functional occlusal relationships are the well-defined objectives of orthodontic therapy. To accomplish it, the jaws must be positioned in centric relation (CR)/ Central occlusion (CO) and appropriately proportioned in three space planes. Orthodontists have well-established techniques when analyzing the skeletal connection between the maxilla and mandible in both sagittal and vertical planes. Although there exist multiple analyses for the skeletal transverse dimension (STD), their inclusion in conventional orthodontic diagnosis is not widely acknowledged. Transverse tooth compensations have been visually represented in prosthodontic literature using a crosshatch arch that passes through the buccal and palatal cusps of maxillary molars, known as the Wilson curve. An inflated Wilson curve has long been seen as a prosthetic maxim, increasing the possibility of working and non-working side interferences. Research has indicated a connection between higher masticatory muscle activity and posterior occlusal contacts or interferences. When skeletal transverse issues are concealed by dental expansion, there is an elevated susceptibility to gingival recession in orthodontic patients who have a small Maxilla or constricted upper jaw. The temporomandibular joints, muscles, periodontal tissue, and airway might all suffer in a susceptible patient with a transverse insufficiency brought on by a narrow maxilla. As for orthodontists, the objective is to create skeletal connections and functional occlusion that are as near ideal as feasible. This will reduce the likelihood of occlusion-related inconsistencies exacerbating the negative consequences on the dentition, periodontium, or joints. An accurate skeletal and dental diagnostic in all three space planes is required. Our goal is to explain all approaches to enable readers to use a transverse skeletal diagnostic in their practice regardless of the technological level at their disposal. The initial step is to ascertain the kind and presence of deficiencies in the maxilla. Since fewer soft tissue alterations are caused by maxilla hypoplasia in the transverse direction, skeletal transverse dimension (STD) assessment is a more significant challenge than vertical or sagittal discrepancy assessment. Model analysis, clinical assessments, radiographic measurements, and occlusograms have all proven successful in producing accurate assessments. Most of the time, surgically assisted maxillary expansion (SARME) is reported to have higher stability than orthopedic maxillary expansion (OME). We examine and discourse on possible research opportunities using the Collaborative Cross (CC) mouse model as a substitute research model.

This article is a study on the (k,s)-Riemann-Liouville fractional integral, a generalization of the Riemann-Liouville fractional integral. Firstly, we introduce several properties of the extended integral of continuous functions. Furthermore, we make the estimation of the Box dimension of the graph of continuous functions after the extended integral. It presents that the upper Box dimension of the (k,s)-Riemann-Liouville fractional integral for any continuous functions is no more than the upper Box dimension of the functions on the unit interval I=[0,1], which indicates that the upper Box dimension of the integrand f(x) will not be increased by the σ-order (k,s)-Riemann-Liouville fractional integral ksD−σf(x) where σ&gt;0 on I. Additionally, we prove that the fractal dimension of ksD−σf(x) of one-dimensional continuous functions f(x) is still one.

A method of direction-of-arrival (DoA) estimation for FMCW radars is presented. In addition to MUSIC and ESPRIT, which are well-known high-resolution DoA estimation algorithms, deep learning has recently emerged as a very promising alternative. It is proposed in this paper to use a 3D convolutional neural network (CNN) for DoA estimation. The 3D-CNN extracts from the radar data cube spectrum features of the region of interest (RoI) centered on the potential positions of the targets, thereby capturing the spectrum phase shift information, which corresponds to DoA, along the antenna axis. Finally, the results of simulations and field experiments are provided to demonstrate the superior performance, as well as the limitations, of the proposed 3D-CNN.

Research shows that stress, a common problem in dense cities, can be relieved in the natural environment. As great significance has been attached to the urban environment and public health in the society, this paper aims to study the relation and interaction between the perceived sensory dimension of urban park green space, attention restoration and state empathy. Therefore, we conducted an on-site questionnaire survey in four typical parks in Chengdu in terms of age, sex, daily stress, frequency of access in parks and other basic information of the respondents. The main part consists of perceived dimension, state empathy and attention restoration. The software SPSS24.0 is applied to the test of the validity and reliability of the PSD Scale, and then the important correlation between the perceived sensory dimensions in the parks and visitors' attention restoration is analyzed through multiple linear regression. Finally, the moderation effect of state empathy is tested by PROCESS. The findings show that (1) only seven dimensions in the PSD Scale are effective; (2) Serene and Refuge in the perceived sensory dimensions have significant effect on the restorative components of attention. (3) Except the dimensions of Rich in Species and Refuge, empathy enhanced the moderation effect in the interaction between the other five dimensions the Perceived Restorative Scale(PRS), especially in the interaction between the dimension Social and PRS. However, this study needs to be further explored to provide scientific basis and design strategy guidance for the research on the restoration potential of urban park green space in high-density urban areas.

(RADA)4 nanoscaffolds are excellent candidates for use as peptide delivery vehicles: they are relatively easy to synthesize with custom bio-functionality, and assemble in situ to allow a focal point of release. This enables (RADA)4 to be utilized in multiple release strategies by embedding a variety of bioactive molecules in an all-in-one ‘construct’. One novel strategy focuses on the local, on-demand release of peptides triggered via proteolysis of tethered peptide sequences. However, the spatial-temporal morphology of self-assembling nanoscaffolds may greatly influence the ability for enzymes to both diffuse into as well as actively cleave substrates. Fine structure and its impact on overall affect on peptide release is poorly understood. In addition, fractal networks observed in nanoscaffolds are linked to the fractal nature of diffusion in these systems. Therefore, matrix morphology and fractal dimension of virgin (RADA)4 and mixtures of (RADA)4 and matrix metalloproteinase 2 (MMP-2) cleavable substrate modified (RADA)4 were characterized over time. Sites of high (GPQG+IASQ, CP1) and low (GPQG+PAGQ, CP2) cleavage activity were chosen. Fine structure was visualized using established according to established methods. After 2 hrs of incubation, nanofiber networks showed an established fractal nature, however nanofibers continued to bundle in all cases as incubation times increased. It was observed that despite extensive nanofiber bundling after 24 hrs of incubation time, the CP1 and CP2 nanoscaffolds were susceptible to MMP-2 cleavage. The properties of these engineered nanoscaffolds characterized herein illustrate that they are an excellent candidate as an enzymatically initiated peptide delivery platform.

The commercial oxygen-free copper sheets were cold-rolled with reduction rates ranging from 20% to 87% reduction rate and annealed at 400, 500 and 600 °C. The microstructure and texture evolution during cold-rolling and annealing processes were studied using optical microscopy (OM), the scanning electron microscopy (SEM) and the electron back-scattered diffraction (EBSD). The results show that the deformation textures of {123} (S) , {112} (Copper) and {110} (Brass) were continuously enhanced with the increase of cold-rolling reduction. The orientations along the α-oriented fiber converged towards Brass and the orientation density of β fiber obviously increased when the rolling reduction exceeded 60%. The recrystallization texture was significantly affected by the cold-rolling reduction. After 60% cold-rolling reduction, Copper and S textures components gradually decreased and {011} recrystallization texture component formed with the increase of annealing temperature. After 87% cold-rolling reduction, a strong Cube texture formed and other textures were inhibited with the increase of annealing temperature. The strong Brass and S deformation texture was conducive to the formation of a strong Cube annealing texture. The density of annealing twin boundary decreased with the increase of annealing temperature, and more annealing twin boundaries formed in the oxygen-free copper sheets with the increase of cold rolling reduction.

In this study, the friction factor of turbulent pipe flow for dried rice malt extract solutions is reduced experimentally to that of a Newtonian fluid. The friction factor is measured for four types of solutions at different culture times and concentrations. The results indicate that the experimental data points of the test solutions diverge from the maximum drag reduction asymptote at and above Re√f ≅ 200 and align parallel to those of Newtonian fluids. This drag reduction phenomenon differs from that of artificial high molecular polymer solutions. It is classified as a Type B drag reduction phenomenon of biopolymer solutions and fine solid particle suspensions. The order of drag reduction corresponds approximately to that of 5–50 ppm xanthan-gum solutions reported previously. Furthermore, the velocity profile in a turbulent pipe flow was predicted using a semi-theoretical equation, in which the friction factors were determined using the difference between the experimental results of the tested solutions and Newtonian fluids. The results indicate a more considerable thickening of the viscous sublayer in the turbulent pipe flow of the test solutions than that of Newtonian fluids.

Attribute reduction is a core technique in the rough set domain and an important step in data preprocessing. Researchers have proposed numerous innovative methods to enhance the capability of attribute reduction, such as the emergence of multi-granularity rough set models, which can effectively process distributed and multi-granularity data. However, these innovative methods still have many shortcomings, such as how to deal with complex constraints and how to perform multi-angle effectiveness evaluations. Based on the multi-granularity model, this study proposes a new method of attribute reduction, namely using multi-granularity neighborhood information gain ratio as the measurement criterion. This method combines both supervised and unsupervised perspectives, and by integrating multi-granularity technology with neighborhood rough set theory, constructs a model that can adapt to multi-level data features. This model can select the optimal granularity level or attribute set according to the requirements. Finally, the proposed method is experimented with on 15 UCI datasets against six other attribute reduction algorithms. The experimental outcomes, upon analysis and comparative review, substantiate the reliability and consistency of the attribute reduction approach introduced in this study.

Ammonia can be considered a relevant compound in the future energy sector, playing a significant role as an energy carrier, storage, or carbon-free fuel. However, the production of this molecule has a high energy demand, and the use of natural gas, which is not free of controversy due to the accidental leakage into the atmosphere produced during extraction and the fact that it is a non-renewable source, contributes to increasing greenhouse gas emissions. Reducing the process’s energy demand and carbon footprint will be essential to making ammonia a clear alternative for a carbon-free economy. Given the vast experience in ammonia production and handling, this gas seems to be the logical step forward in the evolution of the energy sector. However, the current uncertainty in the global market requires cautiousness in decision-making. Several factors may impact economic growth and human welfare, thus needing a careful assessment before taking any transcendental decisions that could affect worldwide energy prices and raw material availability.

The use of hyperthermia is one of the effective methods of treating cancer. In this case, the problem arises of constructing and predicting the distribution of the thermal field inside tissues depending on their type. This paper discusses the use of linear and polynomial regression methods, as well as regression algorithms based on decision tree, random forest and K nearest neighbors methods to recover missing temperature values. The influence of the size of the training sample when performing regression on the quality of the reconstructed values is investigated. Experimental recommendations on sample size are given for the selected decision tree and random forest methods. The possibility of a significant (10 times or more) reduction in the initial sample size, without leading to a decrease in the R² metric by more than 0.05 for various tissues, has been shown.

Background and objectives: Thoracolumbar fracture – dislocations (AO type C) are rare injuries that occur due to very high-energy trauma, and the result is transitional and rotational instability of the spinal column and neurological impairment. Several reduction maneuvers have thus far been published, each of which can be of use in certain specific situations. We developed a novel modification to the previously described reduction technique. Materials and methods: This is a retrospective review of the management of thoracic AO type C fracture-dislocations managed with a modified novel reduction technique. The success of the reduction and intraoperative iatro-genic complications such as dural tear and screw pull out were the outcomes analyzed. Results: A total of 4 cases were successfully reduced with this novel reduction technique. We did not note any complications such as a dural tear or screw failure with this modified novel reduction tech-nique. Conclusion: The novel modification to the reduction technique employed in the management of thoracic fracture-dislocations resulted in a successful reduction without the risk of iatrogenic complications due to the reduction maneuver.

This study aimed to investigate the effect of reducing the amount of organic waste on the weight of cats in Tehran. The weight of 4192 cats was measured from spring 2016 to the end of winter 2020. They were classified into 6 age groups, 2 gender groups, and 13 geographical areas. Their weight was measured for 48 months (16 seasons). The statistical parameters analysis showed no weight loss in 2017, but since 2018, cats have been losing weight every year. They had lost about 178g of their weight in 2018. The sharpest annual decrease was observed in 2019 when about 301g of weight loss was recorded. In the winter of 2020, 115g of weight loss took place. In the spring of 2017, no weight change was observed, but in the spring of 2018, the cats lost 155g of their weight. Their weight loss intensified in the spring of 2019 and about 299g of weight loss was observed. In the summer of 2017, as in the spring of the same year, no weight loss was recorded, but for the summer of 2018, the weight loss was evident and about 205g of the weight of the cats had been reduced. The weight loss in the summer of 2019 not only continued but intensified and about 304g of weight loss was recorded for cats. Weight change was not observed in the fall of 2017 as in the spring and summer of the same year. In the fall of 2018, weight loss was recorded for cats. They had lost about 324g of their weight in the fall of 2018. Also, they experienced a weight loss of about 218g in the fall of 2019. During the spring, summer, and autumn of 2017, no weight loss was observed in the cats for the winter of 2018, but in the winter of 2019, the cats faced the most severe weight loss (seasonally). They lost about 401g of weight in the winter of 2019. Of course, in the winter of 2020, about 186g of weight loss was observed in cats. The results showed that female cats did not lose weight in 2017 but experienced weight loss in 2018 with a weight loss of 181g. The weight loss of females intensified in 2019 and 294g of weight loss was recorded. Female cats lost 186g of their weight in the winter of 2020. Male cats did not lose weight like female cats in 2017. But in 2018, a weight loss of 166g was observed in male cats. The weight loss of male cats continued in 2019 and 311g of weight loss was recorded for them. However, in 2020, unlike females, weight loss was not observed in male cats. It can be said that both sexes lost more weight in the winter of 2019 than in other seasons. In 2017, weight loss was observed only for the region of 10, and in the same year, weight gain was recorded for the region of 15. But in 2018, except for regions 3, 4, 15, and 19, weight loss was observed in other regions. In 2019, the weight loss of cats spread and weight loss was observed in all regions except the region of 12. In winter 2020, weight loss was recorded only in the region of 4. In the end, it can be concluded that the weight of cats has decreased since the spring of 2018 because the beginning of the decrease in the amount of organic waste has been recorded since the winter of 2018. So, there is a direct relationship between the weight of cats and the amount of organic waste (access to food). The amount of garbage has been decreasing since the winter of 2018, and the average weight of cats has also been decreasing since the spring of 2018 due to the decrease in access to food.

This study investigated the development of Aedes aegypti density in houses of the urban locality of Poblado Miguel Alemán Valdes, in the Sonora state of Mexico, after application of 1% propoxur paint as full wall coverage (IP) and targeted indoor painting (IP 1m) in comparison to IRS with propoxur 70% WP (full wall coverage). The 1% propoxur paint was applied by the homeowners by brushing and rolling at the recommended dose of 1L/8 m², equivalent to 1.5 g a.i./m², while IRS was conducted by professionals with Propoxur 70% WP at a dose of 1 g a.i./m². Adult mosquito surveys were conducted in a random sample of houses in each block one week before the interventions and at week 1, month 1 to 4, month 6, month 9 and month 12 post-interventions. All three propoxur based treatments provided similar reductions (43.7%, 44.9% and 41.3% for IP, IP 1m and IRS respectively) in the fraction of houses positive in female Aedes aegypti resting indoor and outdoor as one year average of 8 follow up surveys. Indoor resting density of Aedes females during the one-year evaluation was reduced by 77.5% through IP followed by IP 1m with 64.2% reduction and 30% reduction with IRS. Culex mosquitoes’ interior density was affected as well by the insecticide treatments with similar average reductions for IP 1m (50.0%) and IRS (57.8%) in comparison with control. Aedes breeding was impacted by the insecticide paint in similar extent for both interventions, expressed by a substantial reduction of the House Index (20.1% IP, 31.2% IP 1m) and especially the Container Index (51.8% IP, 61.7% IP 1m) during the one-year surveys in comparison to control. In contrast, IRS treated block experienced an increase in both indexes. However, despite IP and IP 1m impacted in Aedes adult and immature indexes with noticeable reductions, the differences in all cases were not significative among the different insecticide treatments. The low sample size and mosquito population levels may have influenced the statistical outcomes. More than 80% of the interviewed residents were satisfied with the effectiveness of the paint and IRS treatments. The determination of the blood cholinesterase activity of tested individuals after the use of the carbamate paint and IRS in this study did not exceed acceptable inhibition limits. This study suggests that the application of propoxur paint by homeowners as full house coverage or as targeted indoor painting can be a safe and accepted intervention method for density reduction of Aedes aegypti populations in urban environments.

(1) Background: We reviewed the logistics of the implementation of pathogen inactivation (PI) using the INTERCEPT Blood System™ for platelets and the experience with routine use and clinical outcomes in the patient population at the Sírio-Libanês Hospital of São Paulo, Brazil. (2) Methods: Platelet concentrate (PC), including pathogen reduced (PR-PC) production, inventory management, discard rates, blood utilization, and clinical outcomes were analyzed over the 40 months before and after PI implementation. Age distribution and wastage rates were compared over the 10 months before and after approval for PR-PC to be stored for up to 7 days. (3) Results: A 100% PR-PC inventory was achieved by increasing double apheresis collections and production of double doses using pools of two single apheresis units. Discard rates decreased from 6% to 3% after PI implementation and further decreased to 1.2% after 7-day storage extension for PR-PCs. The blood utilization remained stable, with no increase in component utilization. A significant decrease in adverse transfusion events was observed after the PI implementation. (4) Conclusion: Our experience demonstrates the feasibility for Brazilian blood centers to achieve a 100% PR-PC inventory. All patients at our hospital received PR-PC and showed no increase in blood component utilization and decreased rates of adverse transfusion reactions.

This paper aims to delve into how gender dimensions observed before, during and after a disaster, have been addressed in two internationally recognised frameworks developed for reducing risks of disasters: Hyogo Framework Action (2005-2015) and Sendai Framework for Disaster Risk Reduction (2015-2030). Building on a systematic review, we evaluate 33 scholarly peer-reviewed journal articles, including book chapters and websites in areas of gender, disaster risk reduction and vulnerability. This study documents a comparative picture of these two frameworks and shows the practical implications of the Sendai Framework for Disaster Risk Reduction (SFDRR) by addressing women’s empowerment in the light of their active participation in disaster risk reduction process. The findings of the study suggest that the frameworks have discussed the reduction of women’s socioeconomic vulnerabilities, as well as encouraged their empowerment. Comparing the two frameworks, it appears in the current study that there has been a significant gap in the existing literature that does not explicitly document comparing and contrasting features of a gender lens in the policy documents.

Macadamia (Macadamia integrifolia) nuts have become an essential commodity crop in Malawi. The nuts are a lucrative commodity and are used for household consumption and income generation among farming families and as a foreign exchange earning crop at country-level. In addition, macadamia production has increased significantly in recent years in the country. Currently, Malawi is the seventh top producer of macadamia nuts, with a global market share of three percent (1,846 metric tonnes on kernel basis). In 2018, exports of macadamia kernel had a value of US$24.3 million (£19.8 million or MKW 18.01 billion). However, the bulk (85%) of the crop is grown on large commercial plantations, but the smallholder sector is emerging as vital for the future growth of the macadamia sub-sector in Malawi. Furthermore, Malawian smallholders consider macadamia production to be a low-input crop with large returns per unit area (US$14.37 kg^-1ha^-1 or MKW 10,701kg^-1ha^-1) thus a lucrative crop with high potential for poverty reduction and wealth creation among these farming families. This paper, therefore, explores: (i) the historical and current trends in macadamia nut production in Malawi; (ii) analyses the country’s macadamia value chain and (iii) discusses the constraints of macadamia production in Malawi for informed policymaking. Thus, the synthesis of the Malawian macadamia sub-sector provides an understanding of the vital contributions of macadamias to Malawi’s economic growth and improvement of livelihoods.

A new generation of universal tools and languages for modeling and simulation multi-physical domain applications emerged and became widely accepted, which generate large-scale systems of differential algebraic equations (DAEs) automatically. Motivated by the characteristics of DAEs systems with large dimension, high index or block structures, we first propose a modified Pantelides’ algorithm (MPA) for any high order DAEs based on its Σ matrix, which is similar to Pryce’s Σ method. By introducing a vital parameter vector, a modified Pantelides’ algorithm with parameter has been presented.It leads to a block Pantelides’ algorithm (BPA) naturally which can immediately compute the crucial canonical offsets for whole (coupled) systems with block-triangular form. We illustrate these algorithms by some examples. And numerical experiments show that the time complexity of BPA can be reduced by at least O(ℓ) compared to the MPA, which is mainly consistent with the results of our analysis.

In addition to being a source of freshener, coffee has an enormous possibility to be developed as a source of antioxidants for functional beverages. However, efforts to increase the value added of coffee as a health functional drink are still hindered by the presence of high level of caffeine, which is thought to have adverse effects on health, especially for coffee lovers who are vulnerable to caffeine. This study aims to optimise the steaming duration to produce low caffeine coffee while maintaining the sensory attributes and antioxidant compounds contained in it. Indonesian Arabica (Leksana variety) green coffee beans were steamed with multi-level steaming durations (0, 20, 40, 60 and 80 min) followed by roasting (medium-dark roast degree), grinding, and brewing (espresso method). The results indicate that caffeine content in the coffee was inversely proportional to the steaming duration. The lowest caffeine content was obtained from the treatment of 80 min steaming with a decrease of caffeine level up to 28.73%. However, the longer process of steaming caused a significant decrease in polyphenol content and antioxidant activity. The hedonic test shows that the steaming treatment of coffee can increase preferences of panellists. There were two driving attributes that influence the overall liking of coffee, namely: bitterness and aftertaste. Coffee obtained from the treatment of 60 min steaming was most preferred by panellists. The results of APLSR biplot mapping show that there was a big change in almost all attributes in the coffee samples after 40 min steaming.

Biological nitrogen (N) provisioning is a seminal function of the gut microbes in several terrestrial insects, given the unbalanced carbon (C) and N ratios of their diets. Although freshwater insects face comparable dietary N limitations like terrestrial insects, little is known about this function by their gut microbiomes. In this study, we investigated microbial nitrate reduction to ammonium pathways as possible routes of biological N provisioning in two freshwater insects; filter-feeding Hydropsychidae and grazers/collectors Baetidae. After incubation in filtered (microbe-free) artificial stream water (ASW) containing dissolved ¹⁵N-labeled nitrate (treatment) or standard nitrate (control), bulk δ¹⁵N values of treatment samples (Baetidae = 100.62 ± 10.23, mean ± S.E.; Hydropsychidae = 76.82 ± 7.20) were significantly higher than controls (Baetidae = 10.14 ± 0.12 ; Hydropsychidae = 9.03 ± 0.20) in both functional feeding groups (F _{(3, 13)} = 296, P < 0.0001). The treatment δ¹⁵N values are cautiously interpreted as reflecting uptake and incorporation of microbe-derived ¹⁵N-metabolites (¹⁵NH₄ or ¹⁵N-amino acids) into host tissues following nitrate reduction to ammonium pathways in the gut lumen. Microbial nitrate reduction to ammonium activities was assessed via the quantification of dissimilatory (nrfA) and assimilatory (nasA) nitrate reduction to ammonium gene transcripts. There were no significant differences between control and treatment groups within each insect groups. Overall, this study provides a demonstration of the feasibility of applying ¹⁵N-stable isotope analysis for investigating, potential symbiotic functions of freshwater insect gut microbiomes, despite the preliminary nature of the results.

One of the key areas of the International Renewable Energy Agency’s (IRENA) programme of work is the analysis of renewable technology costs and performance and the dissemination of these results to as wide an audience as possible. In addition to analysis, IRENA seeks to engage a broad range of stakeholders in the context of this work through the Renewable Costing Alliance. The Costing Alliance brings together companies, industry association, governments and researchers to share, confidentially, data for real-world renewable energy project cost and performance, helping to build further on IRENA’s costing work to date. In this context the authors analyse the current cost differentials and cost reduction potentials for solar PV in Japan compared to best practice levels and identify the reasons for higher costs in Japan and how to reduce them. This study analyses the current installed cost differentials for utility-scale, commercial and residential rooftop solar PV systems. In addition to identifying the reasons for the cost differentials, potential policy recommendations to reduce the cost differential are identified.

The recently proposed Holography-inspired approach to quantum gravity is reviewed and expanded. The approach is based on the foliation of the background spacetime and reduction of the offshell states to the physical states. Careful attention is paid to the boundary conditions. It is noted that the outstanding problems such as the cosmological constant problem and black hole information can be tackled from the common thread of the quantized gravity. One-loop renormalization of the coupling constants and the beta function analysis are illustrated. Active galactic nuclei and gravitational waves are discussed as the potential applications of the present quantization scheme to astrophysics.

Addition of the bulky redox-active diphosphine 1,8-bis(diphenylphosphino)naphthalene (dppn) to [Fe2(CO)6(-edt)] (1) (edt = 1,2-ethanedithiolate) affords [Fe2(CO)4(2-dppn)(-edt)] (3) as the major product, together with small amounts of a P-C bond cleavage product [Fe2(CO)5{1-PPh2(1-C10H7)}(-edt)] (2). The redox properties of 3 have been examined by cyclic voltammetry and it has been tested as a proton-reduction catalyst. It undergoes a reversible reduction at E1/2 = –2.18 V and exhibits two overlapping reversible oxidations at E1/2 = –0.08 V and E1/2 = 0.04 V. DFT calculations show that while the HOMO is metal-centred (Fe-Fe -bonding), the LUMO is primarily ligand-based but also contains an antibonding Fe-Fe contribution, highlighting the redox-active nature of the diphosphine. It is readily protonated upon addition of strong acids to afford two isomeric hydride complexes and catalyzes the electrochemical reduction of protons at Ep = –2.00 V in the presence of CF3CO2H. The catalytic current indicates that it is one of the most efficient diiron electrocatalysts for the reduction of protons, albeit operating at quite negative potential.