Acrylamide (AA), a molecule which potentially increases the risk of developing cancer, is easily formed in food rich in carbohydrates, such as biscuits, wafers and breakfast cereals, at temperatures above 120 °C. Thus, it is eminent the need to detect and quantify the AA content in processed foodstuffs, in order to delineate the limits and mitigation strategies. This work reports the development and validation of a high-resolution mass spectrometry-based methodology for identification and quantification of AA in specific food matrices of biscuits, by using LC-MSⁿ with electrospray ionization and Orbitrap as mass analyser. The developed analytical method showed good repeatability (RSD_r 11.1%) and 3.55 μg kg^-1 and 11.8 μg kg^-1 as limit of detection (LOD) and limit of quantification (LOQ), respectively. The choice of multiplexed targeted-SIM mode (t-SIM) for AA and AA-d3 isolated ions provided enhanced detection sensitivity, as demonstrated in this work. Results for AA concentration obtained vary between 323.7 and 2056.1 μg kg^-1. During baking an increase in AA concentration was observed, as well as between samples taken from different areas of the baking oven. Statistical processing of data was performed in order to compare the AA levels with several production parameters, such as time/cooking temperature, placement on the cooking conveyor belt, color and moisture for different biscuits. The composition of the raw materials was statistically the most correlated factor with the AA content when all samples are considered. The statistical treatment presented herein enables an important prediction of factors influencing AA formation in biscuits contributing for putting in place effective mitigation strategies.

This study explores the near-surface dispersion mechanisms of contaminants in coastal waters, leveraging a comprehensive method that includes using dye and drifters as tracers, coupled with diverse observational platforms like drones, satellites, in-situ sampling, and HF radar. The aim is to deepen our understanding of surface currents' impact on contaminant dispersion, thereby improving predictive models for environmental incident management, including pollutant releases. Rhodamine WT dye, chosen for its significant fluorescent properties and detectability, along with drifter data, allowed us to investigate the dynamics of near-surface physical phenomena such as the Ekman current, Stokes drift, and wind-driven currents. Our research emphasizes the importance of integrating scalar tracers and Lagrangian markers in experimental designs, revealing differential dispersion behaviors due to near-surface vertical shear caused by the Ekman current and Stokes drift. The elongation direction of the dye patch aligns with the Ekman current direction during slow current conditions. Analytical calculations of vertical shear, based on the Ekman current and Stokes drift, closely matched those derived from tracer observations. Over a 7-hour experiment, the vertical diffusivity of near-surface water was observed at 2×10-4 m2/s, and the horizontal eddy diffusivity of the dye patch and drifters reached the order of 1 m2/s and at a 1000m length scale. Particle tracking models demonstrate that while HF radar currents can effectively predict the trajectories of tracers near the surface, incorporating near-surface currents, including Ekman current, Stokes drift, and windage, is essential for a more accurate prediction of the fate of surface floats.

This work aimed to carry out a bioremediation study to evaluate the resistance of Penicillium sp. isolated from kefir grains for the treatment of copper. The fungal culture medium was prepared using a 2% malt-agar medium at pH 7.0 in which Penicillium sp. was inoculated. Penicillium sp. growing in a liquid medium showed a decrease in biomass in presence of Cu(NO3)2 (800 mg.L-1), suggesting that the metal impacts the growth rate of the fungus. Moreover, the combined factors of pH and the presence of the inorganic contaminant impacted the radial growth of the fungus, causing inhibition of 73% at pH 4.0, 75% at pH 7.0, and 77% at pH 9.0 in liquid medium compared to control. However, images obtained with scanning electron microscopy showed the integrity of the fungus cell, even at high doses of copper in the medium. Therefore, it can be concluded that Penicillium sp. isolated from kefir grain can bioremediate the environment and that the harmful effects of heavy metals can be minimized as a result biosorption. Although the growth of Penicillium sp. is inhibited, such retardation requires high doses of copper nitrate, thus ensuring the use of this microorganism for protection against the harmful effects of non-essential copper in the environment.

Perfluorooctanoic acid (PFOA), C7F15COOH, has been widely employed over the past fifty years, causing an environmental problem due to its dispersion and low biodegradability. Furthermore, the high stability of this molecule, conferred by the high strength of the C-F bond makes it very difficult to remove. In this work, electrochemical techniques are applied for PFOA degradation in view to study the influence of the cathode on defluorination. For this purpose, boron doped diamond (BDD), Pt, Zr and stainless steel have been tested as cathodes working with BDD anode at low electrolyte concentration (3.5 mM) to degrade PFOA at 100 mg/L. Among these cathodic materials, Pt improves the defluorination reaction. The electro-degradation of a PFOA molecule starts by a direct exchange of one electron at the anode and then follows a complex mechanism involving reaction with hydroxyl radicals and adsorbed hydrogen on the cathode. It is assumed that Pt acts as an electrocatalyst, enhancing PFOA defluorination by the reduction reaction of perfluorinated carbonyl intermediates on the cathode. The defluorinated intermediates are then more easily oxidized by HO• radicals. Hence, high mineralization (xTOC: 76.1%) and defluorination degrees (xF-: 58.6%) were reached with Pt working at current density j = 7.9 mA/cm2. This BDD-Pt system reaches a higher efficiency in terms of defluorination for a given electrical charge than previous works reported in literature. Influence of the electrolyte composition and initial pH are also explored.

This study aimed to determine the pathogenicity of the bacteria isolated and characterized from the kpètè kpètè used to produce two fermented beers in Benin. Species were identified by specific biochemical tests such as catalase, coagulase, and API 20 E. Antibiotic sensitivity was tested according to the French Society of Microbiology Antibiogram Committee. The crystal violet microplate technique and conventional PCR evaluated biofilm production to identify genes encoding virulence and macrolide resistance. Our data shows that Kpètè Kpètè used to produce beers are contaminated by Enterobacteriaceae species (Klebsiella terrigena, Enterobacter aerogens, Providencia rettgeri, Chryseomonas luteola, Serratia rubidae, and Enterobacter cloacae) and Staphylococcus spp. These multidrug-resistant strains can produce biofilms with a strong predominance of Enterobacter aerogens, Klebsiella terrigena (100%), and Staphylococcus spp (60%). Enterobacter cloacae (4%) and Coagulase negative Staphylococcus (5.55%) harbor the macrolide resistance gene. For other strains, these genes were not detected. Foods contaminated with bacteria resistant to antibiotics and carrying a virulence gene could constitute a potential public health problem. There is a need to increase awareness campaigns on hygiene rules in preparing and selling these traditional beers.

As climate changes, our daily life has been much influenced by abnormal meteorological phenomena such as heavy rainfall, heat wave, heavy snowfall, and fine dust. Atmospheric air quality is worsening day by day and indoor air quality is also affected by interconnected daily activities throughout the inside and outside of buildings and houses. Nowadays, pollutants from various sources are emitted, transformed by sunlight, vapor, and ozone and transported into the city from country to country. Due to these reasons, there have been high demands to monitor the transportation of particulate matters and improve air quality. Monitoring of pollutants and identification of type and its concentration enables us to track and control its generation and consequently find out the solution. However, monitoring of pollutants, especially, particulate matter generation and its transportation is still not fully operated in atmospheric air due to its open nature and meteorological factors. Even though indoor air is relatively easy to monitor and control than outdoor in the aspect of specific volume and contaminant source, but it still needs to consider the meteorological parameters because indoor air is not fully separated from the outdoor air flow and contaminants transportation. In this study, optical approach using spectral sensor was attempted to reveal the feasibility of wavelength and chromaticity values of reflected light from specific particles. From the analysis of reflected light of various particulate matters according to different liquid additives, parameter studies were performed to investigate which experimental conditions can contribute to the enhanced selective sensing of particulate matters. Five different particulate matters such as household dust, soil, talc powder, gypsum powder and yellow pine tree pollen were utilized and observed to elucidate the relationship between property of particulate matter and detected light spectrum. Applicable approaches to assist current particle matter sensors and improve the selective sensing were suggested.

EMG analysis is becoming increasingly important in many research and clinical applications, including muscle fatigue detection, control of robotic mechanisms and prostheses, clinical diagnosis of neuromuscular diseases and quantification of force. However, electromyographic signals can be contaminated by various types of noise, interference and artifacts, which can lead to misinterpretation of the data acquired using this method. Even assuming best practices, the collected signal may still be altered by such contaminants. The aim of this paper is to review methods employed to reduce contamination of single channel EMG signals. This review is limited to methods performed directly on the measured EMG signal and those that allow total reconstruction of the EMG signal. Subtraction methods used in the time domain, denoising methods performed after signal decomposition and hybrid methods are assessed. It is defended that individual methods may be more or less suitable for a particular application depending on contaminant(s) present in the signal and on the specific requirements of the application.

Triclopyr is an auxin-like herbicide extensively employed to manage weeds in food crops and pastures. Triclopyr has been detected in environmental matrices, with a notable presence within aquatic ecosystems. Given the limited understanding of its fate in the environment, potential implications for environmental and human health, and the lack of adequate monitoring in various environmental compartments, triclopyr is now considered a contaminant of emerging concern (CEC). The present study was undertaken to investigate the impact of triclopyr on zebrafish development, with a specific focus on assessing its embryotoxic, behavioral, and neurotoxic effects at environmentally realistic concentrations ranging from 0.5 to 50 µM on zebrafish embryos. Our results revealed that triclopyr caused sublethal effects on zebrafish embryos, such as delayed hatchability at 50 µM, yolk sac retention at 0.5, 1, 5, and 10 µM, and uninflated swim bladder at 50 µM concentration of triclopyr. Moreover, a subtle alteration in the swimming activity of larvae was observed in the 10 µM triclopyr after 144 hours of exposure. However, the activity of acetylcholinesterase, remained unchanged after triclopyr exposure. Taken together, these comprehensive findings suggest that triclopyr can induce adverse effects on the early development of zebrafish, even at concentrations detected in aquatic environments.

2,4-dichlorophenoxyacetic acid (2,4-D) is a globally used herbicide and is frequently found in water samples. This fact has prompted studies on its effects in non-target organisms, revealing significant alterations on liver structure and function. In this review, we evaluated the literature on the hepatotoxicity of 2,4-D, focusing on morphological damages, biomarkers of toxicity and affected liver functions. Searches were conducted on PubMed, Web of Science and Scopus and 83 articles were selected after curation. Among the studies, 72% used in vivo models and 30% used in vitro models. Additionally, 48% used the active ingredient, and 35% used commercial formu-lations in exposure experiments. The most affected biomarkers were related to a decrease in an-tioxidant capacity, including alterations in the activities of catalase and superoxide dismutase, and in the levels of malondialdehyde. Changes in energy metabolism, lipids, liver function, and xenobiotic metabolism were also identified. Furthermore, we found studies about the effects of 2,4-D in mixtures with other pesticides, as well as hepatoprotection trials. The reviewed data in-dicate that the reduction in antioxidant capacity and oxidative stress play an important role in 2,4-D-induced hepatotoxicity. However, the mechanism of action of the herbicide is still not ful-ly understood and further research in this area is needed.

Dietary contaminants are often an over-looked factor in the health of zebrafish. Typically, water is considered to be the source for most contaminants, especially within an aquatic environment. For this reason, source water for zebrafish recirculating systems is highly regulated and monitored daily. Most facilities use reverse osmosis or de-ionized water filtration systems to purify incoming water to ensure that contaminants, as well as pathogens, do not enter their zebrafish housing units. However, diets are rarely tested for contaminants and, in the case of manufactured zebrafish feeds, since the product is marketed for aquaculture or aquarium use it is assumed that the feed is acceptable for animals used for research. The following provides examples as to how contaminants could lead to negative effects on development and behavior of developing zebrafish.

The precise prediction of air contaminant dispersion is essential to the air quality monitoring and the emergency management of the contaminant gases leakage incidents in the chemical industry park. The conventional atmospheric dispersion models can seldom give precise prediction due to inaccurate input parameters. In order to improve the prediction accuracy of dispersion model, two data assimilation methods (i.e. one is merely based on the typical particle filter while the other is a combination of particle filter and expectation-maximization algorithm) are proposed to assimilate the UAV observations into the atmospheric dispersion model. Two emission cases are taken into consideration, the difference between which is the different dimensions of state variables. To test the performances of the proposed methods, experiments corresponding to the two emission cases are designed and implemented. The results show that the particle filter can effectively estimate the model parameters and improve the accuracy of model prediction when the dimension of state variables is low. In contrast, when the dimension of state variables becomes higher, the method of particle filter combining expectation-maximization algorithm performs better in the parameter estimation accuracy and warm-up time. Therefore, the data assimilation methods are able to effectively support the air quality monitoring and emergency management in chemical industry parks.