Extremophilic bacteria are important groups of extremophilic organisms that have been studied during the last years. They are considered as a source of enzymes due to great diversity and can survive under extreme conditions. Many enzymes produced by these microorganisms are of great importance and have found applications in several industries. Due to their activity and stability under extreme conditions, these enzymes offer new alternatives for current biotechnological and industrial applications. They have a wide range of potential uses and have been a nuclear subject of many different investigations. To date, some of the enzymes produced by extremophilic bacteria are currently being assessed thier industrials applications. Despite, benefits that present these enzymes, their potentials remain largely unexplored. These enzymes pose new opportunities for new line of research, and biotechnological applications. This review provides a summary on diversity and biotechnological and industrial applications of some enzymes produced by extremophilic bacteria.

It is common knowledge that increasing CO₂ concentration plays a major role in enhancement of the greenhouse effect and contributes to global warming. The purpose of this study is to complement the conventional and established theory that increased CO₂ concentration due to human emissions causes an increase of temperature, by considering the reverse causality. Since increased temperature causes an increase in CO₂ concentration, the relationship of atmospheric CO₂ and temperature may qualify as belonging to the category of “hen-or-egg” problems, where it is not always clear which of two interrelated events is the cause and which the effect. We examine the relationship of global temperature and atmospheric carbon dioxide concentration at the monthly time step, covering the time interval 1980–2019, in which reliable instrumental measurements are available. While both causality directions exist, the results of our study support the hypothesis that the dominant direction is T → CO₂. Changes in CO₂ follow changes in T by about six months on a monthly scale, or about one year on an annual scale. We attempt to interpret this mechanism by involving biochemical reactions, as at higher temperatures soil respiration, and hence CO₂ emission, are increasing.

Urban rail transit has become the main mode to ease traffic congestion. Researches on the dynamic variation regularity of passenger flow distribution and passenger flow volume of urban rail transit hub platform have important implication in hub capacity design, operation organization and risk prevention. This paper proposes a passenger flow distribution integrating model (PFDIM) based on the basic theory analysis and basic parameter models of passenger flow distribution in hub platform. Simulation designs of PFDIM are built with Java and Anylogic, which contain simulation system functional framework, implementation path, simulation processes and simulation models. By case study, the performance comparison between two simulation methods indicates that simulation designs are scientific and accordant with the reality scene; calculation results prove that PFDIM has a good performance on describing the dynamic variation regularity of passenger flow distribution. Moreover, the experiments with different departure intervals could provide the reference for train scheduling under the viewpoint of traffic safety and service level.

Despite of being an exceptionally biodiversity rich country, the forest coverage of Bangladesh is declining at an alarming rate. Declaration and management of protected areas in this regard is one of the efforts from government side to tackle the loss of biodiversity. The limited numbers of forest-protected areas (FPA), established to conserve the dwindling forest biodiversity of the country with high pressure on them for timber, non-timber forest products, and fuelwood - makes their management challenging. Moreover, most of the FPAs of the country declared only in the recent decades with very limited infrastructure, manpower and policy support for monitoring and governance. Some people-centred approaches for the management of FPAs and alternative livelihood and income generation subsidies although made available through a few project interventions, their number are still inadequate and performance remains less than satisfactory. This chapter provides a critical review of the FPAs of Bangladesh looking at their role in biodiversity conservation, management challenges, and key lessons from previous management interventions with recommendations for the future. It has been revealed that the FPA system of Bangladesh still poorly represents the diverse forest ecosystems with relatively small forest size and lack of corridors for the movement of wildlife. There are ample opportunities to render co-management of FPAs an effective strategy to minimize the conflicts in FPAs management in the country. It is, however, important to ensure the access of local forest-dependent people to different alternative income generating options that may adequately support their livelihoods.

The concept of a Social License to Operate (SLO) has become increasingly important in the sustainability literature in recent years. Having its origins in the business discourse of the mining industry with respect to limiting opposition to mining projects, the notion of a social contract above and beyond legal requirements has since become applied across a number of different industries. Despite the concepts adoption confusion exists over the practices and outcomes of SLO, and particularly the nature of engagement. Given this situation it is surprising that not more attention to the role of marketing, and social marketing in particular, in operationalizing the concept. The paper discusses the potential of social marketing to contribute to SLO. Economic, political and social relations are complex in SLO and exchange is intricate in such relational environments. A community-based social marketing orientation is proposed as a means to improve exchange relations and enhance engagement. Seven models of SLO related social marketing models are discussed with community-based social marketing and adaptive co-marketing models being regarded as the most positive for the achievement of an SLO. Potential barriers to adoption of these approaches are noted.

The present work investigates primarily the morphology evolution of the body-centered-cubic (BCC)/B2 phases in AlxNiCoFeCr high-entropy alloys (HEAs) with increasing Al content, which has been neglected so far. There exist two types of microscopic morphologies of BCC and B2 phases in this HEA series: one is the weave-like morphology induced by the spinodal decomposition, and the other is the microstructure of a spherical disordered BCC precipitation on the ordered B2 matrix that appears in HEAs with a much higher Al content. The shape of coherent precipitates is found to be closely related to the lattice misfit between BCC and B2 phases, which is sensitive to Al. The mechanical properties, including the compressive yielding strength and microhardness of the AlxNiCoFeCr HEAs, are also discussed in light of the concept of the valence electron concentration (VEC).

The global spread of coronavirus disease (COVID -19) worldwide has had a significant effect on social and economic growth. The contamination keeps on advancing quickly and eccentrically, representing a significant test to its recognition and conclusion. Coronaviruses are commonly recognized by seclusion from tests, regardless of whether natural or clinical, utilizing some atomic science procedures, which can take a few days. In this work an analytical review of virus transmission, methods of diagnosing COVID -19 using artificial intelligence techniques to classify images and types of biosensors. At long last, the deformities and points of interest of each kind of sensor are recognized and examined. This exploration gives an explanatory audit of the utilization of crown infection COVID-19 in 2019. Related examinations were led utilizing five dependable databases, for example, Science Direct, IEEE Xplore, Scopus, Web of Science, and PubMed. An acceptable investigation is remembered for this audit, which can be depended upon as a logical database to put resources into another technique for recognizing COIVD-19.

Problem solving is one of the most important components of the human cognition that affects for ages the progress of the human society. Mathematical modelling is a special type of problem solving concerning problems related to science or everyday life situations. The present study is a review of the author’s earlier works on problem solving and mathematical modelling from the scope of Education. Its real goal is that it presents in a systematic way and in a few pages only the results of many years research on the subject. This helps the reader to get a comprehensive idea about a very important topic belonging to the core of Mathematics Education, which is very useful to those wanting to study deeper the subject and get directions for further research in the area.

Recently, many authors have been interested to introduce fuzzy implications over t-norms and t-conorms. In this paper, we introduce (S,N) and residuum fuzzy implication for Dubois t-norm and Hamacher's t-norm. Also, new concepts so-called (T,N) and residual fuzzy co-implication in dual Heyting Algebra are investigated. Some examples as well as application are discussed as well.

Indonesia is among the countries developing the concept of smart city. The national government envisions Indonesia 2030 which shall implement the smart city towards sustainable development. Many regions in Indonesia have already implemented the concept of smart city, but still on the level of smart government and smart technology, lacking on the smart citizen component of a smart city. This paper aims to analyze the citizens behavior of using technology on Sleman smart citizen 2021 through the lapor sleman mobile application. This research uses mixed method of quantitative and qualitative approaches in examining the data. The authors distributed 100 questionares and conducted interviews to the government which is department of communication and information, Sleman and the several community that ever use the lapor sleman application. The result of the study reveals the following: firstly, performance expectancy, social influence, and behavioral intention are three independent variables which affect the users’ behavior. Secondly, the behavioral intention has the biggest significant effect on users’ behavior. Thirdly, the citizen behavior of using technology has affect the making a smart citizen. Therefore, using technology in term of lapor sleman mobile application can make the citizens as active participants in public life, in terms of social cooperation, freedom of expression and flexibility. However, there are still many problems in the use of lapor sleman mobile application such as the limited access to only android smartphones, lack of technical know-how, and people’s reluctance to use the lapor sleman mobile application.

Summary CoV-GLUE is an online web application for the interpretation and analysis of SARS-CoV-2 virus genome sequences, with a focus on amino acid sequence variation. It is based on the GLUE data-centric bioinformatics environment and provides a browsable database of amino acid replacements and coding region indels that have been observed in sequences from the pandemic. Users may also analyse their own SARS-CoV-2 sequences by submitting them to the web application to receive an interactive report containing visualisations of phylogenetic classification and highlighting genomic variation of potentially high impact, for example linked to primer mismatches.Availability and implementation Available at http://cov-glue.cvr.gla.ac.uk. Implemented using GLUE, an open source framework for the development of virus sequence data resources. Contact josh.singer@glasgow.ac.uk

Background: On late December 2019, a viral pneumonia known as coronavirus disease 2019 (COVID-19), was originated from China and spread very rapidly in the world. Therefore, COVID-19 became a global concern and health problem. Methods: We presented four patients in this study. They were selected from patients who presented with pneumonia symptoms and were suspicious for COVID-19 and referred to the intended centers for COVID-19 diagnosis and management of Shiraz University of Medical Sciences in the south of Iran. Two nasopharyngeal and oropharyngeal throat swab samples were collected from each patient and tested for severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) detection by real-time reverse-transcriptase–polymerase-chain-reaction (RT-PCR), and also samples were sent for influenza viruses and all the respiratory panel. Results: In the present report, four patients were diagnosed in the starting days of COVID-19 disease in our center in south of Iran with co-infection of SARS-CoV-2 and influenza virus. Conclusions: This co-infection of COVID-19 and influenza highlights the importance of considering SARS-CoV-2 PCR assay regardless of other positive findings for other pathogens in the primary test during the epidemic.

The present grievous situation of the tuberculosis disease can be improved by efficient case management and timely follow-up evaluations. With the advent of digital technology this can be achieved by quick summarization of the patient-centric data. The aim of our study was to assess the effectiveness of the ODK Scan paper-to-digital system during testing period of three months. A sequential, explanatory mixed-method research approach was employed to elucidate technology use. Training, smartphones, application and 3G enabled SIMs were provided to the four field workers. At the beginning, baseline measures of the data management aspects were recorded and compared with endline measures to see the impact of ODK Scan. Additionally, at the end, users’ feedback was collected regarding app usability, user interface design and workflow changes. 122 patients’ records were retrieved from the server and analysed for quality. It was found that ODK Scan recognized 99.2% of multiple choice bubble responses and 79.4% of numerical digit responses correctly. However, the overall quality of the digital data was decreased in comparison to manually entered data. Using ODK Scan, a significant time reduction is observed in data aggregation and data transfer activities, however, data verification and form filling activities took more time. Interviews revealed that field workers saw value in using ODK Scan, however, they were more concerned about the time consuming aspects of the use of ODK Scan. Therefore, it is concluded that minimal disturbance in the existing workflow, continuous feedback and value additions are the important considerations for the implementing organization to ensure technology adoption and workflow improvements.

Mass transfer restrictions of scaffolds are currently hindering the development of three-dimensional (3D), clinically viable, and tissue engineered constructs. For this situation, a 3D poly(lactide-co-glycolide)/hydroxyapatite porous scaffold, which was much favorable for transfer of nutrients to and waste products from the cells in the pores, was developed in this study. The 3D scaffold had an innovative structure, including macropores with diameters of 300−450 μm for cell ingrowth and microchannels with diameters of 2−4 μm for nutrition and waste exchange. The mechanical strength in wet state was strong enough to offer the structural support. The typical structure was more beneficial for the attachment, proliferation, and differentiation of rabbit bone marrow mesenchymal stem cells (rBMSCs). The alkaline phosphatase (ALP) activity and calcium (Ca) deposition were evaluated on the differentiation of rBMSCs, and the results indicated that the microchannel structure was very favorable for differentiating rBMSCs into maturing osteoblasts. For repairing rabbit radius defects in vivo, there was rapid healing in the defects treated with the 3D porous scaffold with microchannels, where the bridging by a large bony callus was observed at 12 weeks post-surgery. Based on the results, the 3D porous scaffold with microchannels was a promising candidate for bone defect repair.

Good governance in natural resource management (NRM) is one of the most challenging issues in developing countries that often inappropriately embedded in national policies and political agendas. It is, in fact, even more important for countries like Bangladesh with exceptionally high pressure and dependence on its natural resources for sustaining rural livelihoods. Globally, nowadays, good governance is considered as one of the key factor for achieving the goal of sustainable development and biodiversity conservation. Bangladesh, of late has responded to that global zeal by involving local communities in the management of country’s declining forest and other natural resources. The colonial legacy of the forestry sector of Bangladesh was planned and, managed as interim projects through donors’ prescriptions. Thus, institutions, management processes and conservation outcomes were problematic. The conventional approach adopted by colonial and post-colonial regimes for forest management also proved to be inefficient due to its top-down management system. The absolute dependency on donor support, and their prescription sometimes worsened the situation both ecologically and socially. Global, regional and local trends supported the need for a different dimension in the governance paradigms. The introduction of a pluralistic approach, known as co-management in protected areas (PAs) is an example of an attempt whereby shared governance mechanism are implemented to attain the desired goals of conservation that will also address the livelihoods and aspirations of communities living in and around PAs of the country. However, in designing future forest and PA regimes the concern of the external aid support and attached conditions remain a reality that needs to be addressed. Adequate attention should be given to our vanishing biodiversity, culture and community livelihoods through devising an appropriate governance mechanism recognizing and supporting local rights, access and participation in the environmental management. It is now time to mainstream the adhoc nature of governance according to our national conservation strategy and policy frameworks in order to achieve the goals and objectives of the Bangladesh NRM sector addressing the human and community right of people in the specific context of forest protected areas management.

Water mist fire suppression technology has attracted an increasing interest from the field of fire protection services such as fire safety for buildings, ships, spacecraft, libraries and museums due to its non-toxic and high efficiency in the suppression of a wide variety of fires. To support the technological development of water mist fire suppression system and its application areas, this review introduces the concept of water mist system and discusses its suppression mechanisms in comparison with other fire protection systems. The recent application areas of water mist system are surveyed for class A fires involving combustible solid materials such as wood, paper and textiles; class B fires involving flammable liquids such as petrol, oils, lubricants, paints and waxes; class C fires involving flammable gasses such as natural gas and liquefied petroleum gas; fires involving electrical (class E) equipment such as computers and information technology facilities; and the class F fires involving flammable cooking oils and fats. Finally, the paper concludes the review by identifying the current research trends, and providing the future direction for water mist technology and applications.

The paper presents a study of two novel visual motion onset stimulus-based brain–computer interfaces (vmoBCI). Two settings are compared with afferent and efferent to a computer screen center motion patterns. Online vmoBCI experiments are conducted in an oddball event–related potential (ERP) paradigm allowing for “aha–responses” decoding in EEG brainwaves. A subsequent stepwise linear discriminant analysis classification (swLDA) classification accuracy comparison is discussed based on two inter–stimulus–interval (ISI) settings of 700 and 150 ms in two online vmoBCI applications with six and eight command settings. A research hypothesis of classification accuracy non–significant differences with various ISIs is confirmed based on the two settings of 700 ms and 150 ms, as well as with various numbers of ERP response averaging scenarios.The efferent in respect to display center visual motion patterns allowed for a faster interfacing and thus they are recommended as more suitable for the no–eye–movements requiring visual BCIs.

SARS-CoV2 RNA depended RNA polymerase is an essential enzyme for the survival of the virus in hosts as it helps in the replication of viral RNA. There are no human polymerases that share either sequence or structural homology with viral RNA depended RNA polymerase. These make it a good target for inhibitor discovery, as a specific inhibitor cannot cross-react with the human polymerases. We have used virtual screening, docking, binding energy calculation and simulation to show that valproic acid Co-A, a metabolite from prodrug valproic acid, forms stable interaction with nsP12 of CoV. Our results suggest valproic acid Co-A could be a potential inhibitor of nsP12 of SARS-CoV2.

Collision avoidance is an important feature in advanced driver-assistance systems, aiming at providing correct, timely and reliable warnings before an imminent collision (objects, vehicles, pedestrians, etc.). A co-simulation framework is proposed in this paper to address the design and evaluation of collision avoidances in a cyber-physical system. The co-simulation framework is supported on the interaction between SCANeR and Matlab/Simulink. From the best of authors’ knowledge, two main contributions are reported in this paper. Firstly, the modelling and simulation of virtual on-chip LIDAR sensors in a cyber-physical system (CPS) considering traffic scenarios is presented. The CPS is designed and implemented in SCANeR. Secondly, an obstacle recognition library with three specific Artificial Intelligence-based methods is also designed based on sensory information database provided by SCANeR. Three methods for collision avoidance detection are considered, i.e.; a multi-layer perceptron neural network, a self-organization map and a support vector machine. Finally, a comparison among these methods for detecting obstacles before different weather conditions is done with very promising results in terms of accuracy. The best results are achieved using the multi-layer perceptron in sunny and fog conditions, the support vector machine in rainy and self-organized map in snowy conditions.

Abstract The COVID-19 pandemic has tremendously affected the African continent and the rest of the world. Most businesses have closed and a lot of people have lost their jobs. The aviation industry has been shaken to the core with airlines losing millions of dollars and flights being cancelled. The tourism industry has consequently been affected due to restricted travel of tourists, impacting wildlife conservation and livelihoods. Schools, colleges and universities have been closed. The virus has infected millions of people and hundreds of thousands of people have died globally putting strain on health systems especially those of hard hit countries. Various countries all over the world have put measures to control the spread of the virus through lockdowns and social distancing policies. The reduced economic activities and mobility of people has resulted in improved air quality, cleaner water and beaches in some countries. However there are also negative impacts such as challenges in waste management, increased pharmaceutical and household waste and discovery of the corona virus in wastewater, a potential threat to public health. A considerable amount of research has been done on the socio-economic impacts of COVID-19 in Africa but there is still limited research on its impact on the environment. This paper serves to highlight the observed and potential environmental impacts of COVID-19 in Africa.

Though Cyber Physical Systems (CPS) become very popular in last the decade, dependability of CPS is still a critical issue and related survey is rare. We try to spell out the jigsaw of technologies and figure out the technical trends of dependable self-managing CPS. This survey first recalls the motivation and the similar concepts. By analyzing four generic architectures, we summarize the common characteristics and related assurance technologies, and propose a more generic environment-in-loop processing flow of CPS and a formal interaction flow between physical space and cyber space. Further, the similarity between correctness and dependability is formally analyzed and the new five research questions of dependable self-managing CPS are presented. Then we review the critical technologies and related correctness verification & validation (V&V) methods, the architectures for dependable self-managing CPS. Further, the detail dependability management and V&V technologies are surveyed, which covers the areas of running-time fault management methods and whole life cycle V&V technologies, maintenance and available tool sets. For holistic CPS development, Modeling techniques and MDE (model driven engineering) based V&V methods are analyzed in detail. Then we complete the jigsaw of technologies and figure out the missing part. Further, we propose the technical challenges and the further direction. To our best knowledge, this is the first comprehensive survey on dependable self-managing CPS development and evaluation.

Self-assembled structures mostly arises through enzyme-regulated phenomena in nature under persistent conditions. Enzymatic reactions are one of main biological processes in fabrication and construction of supramolecular hydrogel networks required for biomedical applications. The enzymatic processes provide a unique opportunity to integrate hydrogel formation. In most of cases, structure and substrates of hydrogels are adjusted by enzyme catalysis due to the chemo-, regio- and stereo-selectivity of enzymes. Hydrogels processed by using various enzyme schemes showed remarkable characteristics as dynamic frames for cells, bioactive molecules and drugs in biomedical applications. A novel class of enzyme-mediated crosslinking hydrogels mimics the extracellular matrices by displaying unique physicochemical properties and functionalities like water-retention capacity, drug loading ability, biodegradability, biocompatibility, biostability, bioactivity, optoelectronic properties, self-healing ability, shape memory ability. In recent years, many enzymatic systems investigated hydrogel cross-linking. Results of biocompatible hydrogel products show that these mechanisms of crosslinking can fulfill requirements for variety of biomedical applications including tissue engineering, wound healing and drug delivery.

The way people innovate and create new ideas and bring them to the market is undergoing a fundamental change from closed innovation to open innovation. Why and how do firms perform open innovation? Firms’ open innovation is measured through the levels of firms’ joint patent applications. Next, we analyze network structures and characters of firms’ joint patent applications such as betweenness and degree centrality, structure hole, and closure. From this research, we drew conclusions as follows. First, the structure of collaboration networks has both direct and indirect effects on firms’ innovative performance. Second, in the process of joint patent applications, there is a long tail phenomenon in networks of joint patent applications. Third, the number of patents and International Patent Classification (IPC) subclasses together constitute a meaningful measure of the innovation performance of firms.

In the paper, the authors survey integral representations of the Catalan numbers and the Catalan–Qi function, discuss equivalent relations between these integral representations, supply alternative and new proofs of several integral representations, collect applications of some integral representations, and present sums of several power series whose coefficients involve the Catalan numbers.

Background: Previously, our laboratory has provided evidence that pre-administration of the antioxidant, lipoic acid covalently bonded to various naturally occurring antioxidants, enhanced neuroprotective capacity compared to the administration of lipoic acid on its own. The naturally occurring compound scopoletin, a coumarin derivative, has been shown in various in vitro studies to have both antioxidant and anti-inflammatory mechanism of actions. To date, the effect of scopoletin on neuronal cell death in an in vivo model of ischemia or ischemia-reperfusion has not been investigated. Therefore, the present investigation was designed to determine if scopoletin on its own, or a co-drug consisting of lipoic acid and scopoletin covalent bond, named UPEI-400, would be capable of demonstrating a similar neuroprotective efficacy. Methods: Using a rodent model of stroke in male rats (anesthetized with Inactin®; 100 mg/kg, iv), the middle cerebral artery was permanently occluded for 6 hours (pMCAO), or in separate animals, occluded for 30 min followed by 5.5 hrs of reperfusion (ischemia/reperfusion; I/R). Results: Pre-administration of either scopoletin or UPEI-400 significantly decreased infarct volume in the I/R model (p<0.05), but not in the pMCAO model of stroke. However, UPEI-400 was ~1000 times more potent as compared to scopoletin on its own. The optimal dose of UPEI-400 was then injected during the occlusion and at several time points during reperfusion and significant neuroprotection was observed for up to 150 mins following the start of reperfusion (p<0.05). Conclusion: The data suggest that synthetic combination of scopoletin with lipoic acid (UPEI-400) is a more effective neuroprotectant that either compound on their own. Also, since UPEI-400 was only effective in a model of I/R, it is possible that it may act to enhance neuronal antioxidant capacity and/or upregulate anti-inflammatory pathways to prevent the neuronal cell death.

Cloud computing refers to applications delivered as services over the Internet. Cloud systems employ policies that are inherently dynamic in nature and that depend on temporal conditions defined in terms of external events, such as the measurement of bandwidth, use of hosts, intrusion detection or specific time events. In this paper, we investigate an optimized resource management scheme named v-Mapper. The basic premise of v-Mapper is to exploit application-awareness concepts using software-defined networking (SDN) features. This paper makes three key contributions to the field: (1) We propose a virtual machine (VM) placement scheme that can effectively mitigate the VM placement issues for data-intensive applications; (2) We propose a validation scheme that will ensure that a service is entertained only if there are sufficient resources available for its execution and (3) We present a scheduling policy that aims to eliminate network load constraints. An evaluation was carried out with various benchmarks and demonstrated that v-Mapper shows improved performance over other state-of-the-art approaches in terms of average task completion time, service delay time and bandwidth utilization. Given the growing importance of supporting large-scale data processing and analysis in datacentres, the v-Mapper system has the potential to make a positive impact in improving datacentre performance in the future.

This article presents a self balanced multistage DC-DC step-up converter for photovoltaic applications. Proposed converter topology is designed for unidirectional power transfer and provides a doable solution for photovoltaic applications where voltage is required to be stepped up without magnetic components (Transformer-less and Inductor-less). The output voltage obtained from renewable sources will be low and must be stepped up by using a DC-DC converter for photovoltaic applications. K diodes and K capacitors along with two semiconductor control switch are used in the K-stage proposed converter to obtain an output voltage which is (K+1) times the input voltage. The conspicuous features of proposed topology are i) Magnetic components free (Transformer-less and Inductor-less). ii) Continuous input current iii) Low voltage rating semiconductor devices and capacitors iv) Modularity v) Easy to add a higher number of levels to increase voltage gain vi) Only two control switches with alternating operation and simple control. The proposed converter is compared with recent existing transformer-less and Inductor-less power converter in term of voltage gain, number of devices and cost. The application of proposed circuit is discussed in detail. The proposed converter has been designed with rated power of 60W, input voltage is 24V, output voltage is 100V and switching frequency is 100 kHz. The performance of the converter is verified through experimental and simulation results.

Halloysite nanotubes (HNTs) are natural occurring mineral clay nanotubes that have excellent potential application in different fields. However, HNTs are affected by size, surface electron and hydrogen bond formation on the surface which lead to weak affinity and reunion at certain extent. It is very significant to modify the HNTs’ surface to expand its applications. In this review, the structural characteristics, performance and the related applications of surface modification HNTs are reviewed and summarized. We focus on the surface modify methods of HNTs, the effect of surface modification on materials and related applications in various regions. In addition, future prospects and the meaning of surface modification were also be discussed in HNTs studies. This review provided a reference for the application of HNTs modifications in new nanomaterials fields.

The Android-based IoT platform just like the existing Android provides an environment that makes it easy to utilize Google's infrastructure services including development tools and APIs through which it helps to control the sensors of IoT devices. Applications running on the Android-based IoT platform are often UI free and are used without the user’s consent to registered permissions. It is difficult to respond to the misuse of permissions as well as to check them when they are registered indiscriminately while updating applications. This paper analyzes the versions of before and after an application the update running on the Android-based IoT platform and the collected permission lists. It aims to identify the same permissions before and after the update, and deleted and newly added permissions after the update were identified, and thereby respond to security threats that can arise from the permissions that is not needed for IoT devices to perform certain functions.

Web-Based GIS is a platform that deals with the representation, management and storage of locational information for real-time online retrieval, viewing and manipulations. Web-based GIS incorporate all the functions of information systems: gathering, storing, retrieving, visualizing and dissemination of spatial information on the Internet. In modern-day GIS serve as vital means to not only geo-referenced locational information that are been retrieved but also the development in web-based technologies as well as there involvements in decision making processes. In recent time the increased used of GIS on the Internet have totally transformed and made three distinct changes across our GIS environment. These are: (i) how are GIS data being accessed (ii) what are modes of its transmission and (iii) what available GIS functionalities are within the environment for analysis. This paper examines the applications and technologies associated with web-based GIS architectures with an emphasis on the internet GIS based structure and case studies of GIS Web-based applications in MapInfo, Microsoft Silverlight Technology and the ArcGIS Server using ArcGIS JavaScript API.

Pharmaceutically active compounds and organic pollutants are becoming a major environmental dispute possessing serious threat to the water bodies and terrestrial ecosystem. Microorganisms are capable of the self-purification process, and hence the microbial degradation is considered a lucrative method to counteract the therapeutic and recalcitrant pollutants. Pharmaceutical toxicants in aquatic system can be treated by conventional wastewater treatment, but slow sludge settling, presence of mixture of pharmaceuticals and recalcitrant compounds often pose a potential ecological risk. Some microbial strains are very effective in reducing the chemical oxygen demand (COD), biological oxygen demand (BOD), total dissolved solids (TDS), and turbidity in pharmaceutical industrial wastewater treatment. The natural microbial community has a significant role in the ecological processes of pharmaceutical and organic compounds, including non-steroidal anti-inflammatory drugs, analgesics, blood lipid regulators and other micropollutants. Specific bacterial isolates can act as biodegraders, and fungal treatment could offer protection to the ecosystem. These microorganisms use the pollutants as their sole carbon source and transform the contaminants by co-metabolic pathways. Natural attenuation by native microorganisms, biostimulation and bioaugmentation are the processes employed to degrade the target contaminant. Microorganisms may also be genetically engineered to improve the neutralization efficiency, which would assist in the mineralization of the pollutants. Thus, employing microorganisms to detoxify the pollutants probably enhances the sustainable potential biodegradability, improves water quality standards and ensures eco-friendly alternative bioremediation strategy.

In the paper, the authors survey integral representations (including the Lévy--Khintchine representations) and applications of some bivariate means (including the logarithmic mean, the identric mean, Stolarsky's mean, the harmonic mean, the (weighted) geometric means and their reciprocals, and the Toader--Qi mean) and the multivariate (weighted) geometric means and their reciprocals, derive integral representations of bivariate complex geometric mean and its reciprocal, and apply these newly-derived integral representations to establish integral representations of Heronian mean of power 2 and its reciprocal.

The corona (COVID-19) pandemic offers an opportunity for dealing with persistent problems, through a transformative recovery process. It is a crisis that offers opportunities for dealing with three interrelated crises: the ecological crisis (climate change, loss of biodiversity, resource depletion, pollution and ecosystem destruction), the confidence crisis (people losing trust in government, politics, companies, regular news channels, science, each other and the future), and the inequality crisis (the widening of the gap between rich and poor). Our argument is that sustainability transitions will not succeed without a different economy and another social contract with the associated rights and duties of care (for the environment and the well-being of others, including future generations). A different social contract is not only desirable from the point of view of sustainability and fairness, justice and equality, but is also necessary to restore citizens' trust in politics, government, companies and each other. In the paper we discuss mechanisms towards a Natural Social Contract, systemic leverage points for system transformations and possibilities for co-evolutionary governance by actor coalitions interested in transformative change. The combination of those three elements helps to synchronize different agendas and reduce the chance that they will work against each other.

Location-Based Services (LBS) have been widely deployed for the connected vehicle (CV) applications such as vehicle navigation,vehicle tracking and location-based augmented reality. The current LBS deployments have limitations in supporting time-critical CV use cases, including vehicle to vehicle (V2V), vehicle to infrastructure (V2I) and vehicle-to-people (V2P) safety applications. The paper presents the new LBS framework based on the publish-subscribe communication paradigm, to enable device-to-device (D2D) connections through use of selected application protocols in the application layer of the TCP/IP layered protocol model. Two publish-subscribe application protocols, Distributed Data Service (DDS) real-time publish and subscribe (DDS-RTPS) and Message Queue Telemetry Transport (MQTT), are introduced to support the LBS D2D applications. A number of test scenarios with Mosquitto MQTT and OpenDDS under 4G-mobile broadband (MBB) services are designed to assess the transmit/receive round-trip time (RTT) and packet-loss rate (PLR) with settings of a publisher to multiple subscribers, to simulate the connections to multiple vehicles. The transmission frequency is set for 10 Hz and the message sizes vary from 100 to 2000 Bytes. The PLRs are defined as the percentages of the delayed messages beyond a delay limit. Static test results with OpenDDS show that for the RTT delay beyond the limit of 100 ms, the total PLRs range between 5.25% and 8.76% for the message size of 50 to 2000 Bytes. Vehicle testing results with Mosquitto show that PLRs for the RTT delays between 200 ms and 1000 ms are 0.63%, 3.58% and 5.77%, for connections with 1, 4 and 10 vehicles, respectively. The results demonstrate the potential of the D2D LBS framework for medium-demanding CV safety applications such as V2P and V2I use cases, taking advantages of the 4G-MBB services and 5G extreme mobile broadband (eMBB) services and mobile devices generally available with all road users.

In the paper, by virtue of a Lévy–Khintchine representation and an alternative integral representation for the weighted geometric mean, the authors establish a Lévy–Khintchine representation and an alternative integral representation for the Toader–Qi mean. Moreover, the authors also collect an probabilistic interpretation and applications in engineering of the Toader–Qi mean.

As the geolocation capabilities of smartphones continue to improve, developers have continued to create more innovative applications that rely on this location information for their primary function. This can be seen with Niantic's release of Pokémon GO, which is a massively multiplayer online role playing and augmented reality game. This game became immensely popular within just a few days of its release. However, it also had the propensity to be a distraction to drivers resulting in numerous accidents, and was used to as a tool by armed robbers to lure unsuspecting users into secluded areas. This facilitates a need for forensic investigators to be able to analyze the data within the application in order to determine if it may have been involved in these incidents. Because this application is new, limited research has been conducted regarding the artifacts that can be recovered from the application. In this paper, we aim to fill the gaps within the current research by assessing what forensically relevant information may be recovered from the application, and understanding the circumstances behind the creation of this information. Our research focuses primarily on the artifacts generated by the Upsight analytics platform, those contained within the bundles directory, and the Pokémon Go Plus accessory. Moreover, we present our new application specific analysis tool that is capable of extracting forensic artifacts from a backup of the Android application, and presenting them to an investigator in an easily readable format. This analysis tool exceeds the capabilities of UFED Physical Analyzer in processing Pokémon GO application data.

Early reports demonstrated the presence of cells with stem-like properties in bone marrow, with these cells having both hematopoietic and mesenchymal lineages. Over the years, various investigations have purified and characterized mesenchymal stromal/stem cells (MSCs) from different human tissues as cells with multi-lineage differentiation potential under the appropriate conditions. Due to their appealing characteristics and potential, MSCs are leveraged in many applications including medicine, oncology, bioprinting and as recent as treatment of COVID-19. To date, reports indicate mesenchymal stromal/stem cells have varied differentiation capabilities into different cell types and demonstrate immunomodulating and anti-inflammatory properties. Reports indicate that different MSCs microenvironments or niche and the resulting heterogeneity may influence their behavior and differentiation capacity. The potential clinical applications of mesenchymal stromal/stem cells have led to an avalanche of research reports on their properties and hundreds of clinical trials being undertaken. The future looks bright and promising for mesenchymal stem cell research with many clinical trials under way to prove their utility in many applications and in the clinic. This report provides an update on the potential broader use of mesenchymal stromal/stem cells, review early observations of the presence of these cells in the bone marrow and their magnificent differentiation capabilities and immunomodulation.

Introduction The COVID-19 virus was initially reported in Dec 2019 as the causative agent of a pneumonia breakout in Wuhan China. This virus rapidly spread from China to Europe and the East Coast of the United States eventually reaching the South West United States and indigenous tribes in mid -March. Since, then the indigenous tribes have been devasted by the virus which the Governor of New Mexico has likened as an existential threat. Methodology A PubMed search was performed utilizing the words: Navajo Indian, Indigenous Indian, Wuhan Virus, COVID-19, SARs coronavirus, ACE2, S protein, virulence, clinical presentation, epidemiology, genome, treatment, structure, MERs, pathogenesis and/or pathology alone and in combination with other terms. Each paper was evaluated by three content experts for quality, reproducibility, credibility and reputation of the journal Results: Navajo’s and other indigenous peoples may have elevated levels of ACE2 receptors in their lungs and other tissues allowing greater susceptibility to the COVID-19 virus. Increased levels of diabetes and protein nutrition are directly related to increased morbidity and mortality in this group while obesity, COPD, and heart diseas are not. The increased morbidity and mortality is exasperated by an inability to test for COVID-19 Conclusion: The infectivity rate of Navaho’s on the reservation is 22 times higher than the national average with a death rate near 4%. Comorbidites account for some of the increased morbidity and mortality while lack of access to adequate health care unnecessarily magnifies the poor outcome. The threat to indigenous tribes in the Southwest of COVID-19 is dire.

The Estimation of systemic risk in India is still in its infancy stage. There are several methods which are available but none of the methods are fully compatible to forecast the systemic risk since under different circumstances the factors responsible for the risk differs. In this paper the systemic risk estimation in India being carried out based on spread in daily stock market price(Difference between the bid and ask price of a share) of the top 100 firms in India according to market capitalization for the period of July2007 to March 2016. The results were compared with the Financial Stability Report published by Reserve Bank Of India for the period of March 2010 to June 2016.The results clearly indicates that there exits relationship between market illiquidity represented by spread and risks associated with the Financial System. In most of the cases the Z score (deviation from the mean/Standard Deviation) of the spread has become negative which provides the spread which is farther from the mean, also a good indicator of volatility in market and risk to financial system. It is also seen that the Systemic Risk Survey conducted by Reserve Bank of India which started during October 2011 has supported the results.

Co-integration and Causality was built to conduct studies on causality relation between carbon intensity and coal consumption leading to providing important basis for the transition to a low carbon economy. The EG two-step method was performed to study the relation between carbon intensity and coal consumption of China during 1990-2015 and the co-integration and Granger test was constructed to build up the co-integration and error correction models for analysis of the interaction between carbon intensity and coal consumption. The results showed that in long term there is a stable co-integration relation and a positive correlation between carbon intensity and coal consumption; whereas fluctuations exist in short term and there is a one-way Granger causality of carbon intensity with respect to coal consumption.

Porous MnO/C microspheres have been successfully fabricated by a fast co-precipitation method in a T-shaped microchannel reactor. The structures, compositions and electrochemical performances of the obtained MnO/C microspheres are characterized by X-ray diffraction, emission scanning electron microscopy, transmission electron microscopy (HRTEM), Brunauer–Emmett–Teller analysis, charge-discharge testing, cyclic voltammograms, and electrochemical impedance spectra. Experimental results reveal that the as-prepared MnO/C, with a specific surface area of 96.66 m²·g^–1 and average pore size of 24.37 nm, exhibits excellent electrochemical performance, with a discharge capacity of 655.4 mAh·g^–1 after cycling 50 times at 1 C and capacities of 808.3, 743.7, 642.6, 450.1, and 803.1 mAh·g^–1 at 0.2, 0.5, 1, 2, and 0.2 C, respectively. Moreover, the controlled method of using a micro-channel reactor, which can produce larger specific surface area porous MnO/C with improved cycling performance by shortening lithium-ion diffusion distances, can be easily applied in real production on a large-scale.

In this work, we report synthesis of Cu, Pt and Pd doped SnO₂ powders and their comparative CO gas sensing studies. Dopants were incorporated into SnO₂ nanostructures using chemical and impregnation methods by using urea and ammonia as precipitation agents. The synthesized samples were characterized using X-ray diffraction (XRD), Raman spectroscopy, Scanning electron microscopy (SEM) and High resolution transmission electron microscopy (HR-TEM). The presence of dopants within the SnO₂ nanostructures was evidenced from HR-TEM. Doped powders utilizing chemical methods with urea as precipitation agent presented higher sensitivities compared to the remaining, which is due to the formation of uniform and homogeneous particles resulted from the temperature assisted synthesis. The particle sizes of doped SnO₂ nanostructures were in the range of 40-100 nm. An enhanced sensitivity around 1783 was achieved with Cu doped SnO₂ when compared with two other dopants i.e., Pt (1200) and Pd: SnO₂(502). The high sensitivity of Cu: SnO₂ is due to formation of CuO and its excellent association and dissociation in the presence of CO with adsorbed atmospheric oxygen at sensor operation temperatures resulted in high conductance. Cu: SnO₂ may be an alternative and cost effective sensor for industrial applications.

Autonomous and cooperative vehicle systems represent a key priority in the automotive realm. Networked driving simulation can be utilized as a safe, cost-effective experimental replica of real traffic environments in order to support and accelerate the development of such systems. In networked driving simulation, different independent systems collaborate to achieve a common task: multi-driver traffic scenario simulation. Yet distinct system complexity levels are necessary to fulfill the requirements of various application scenarios, such as development of vehicle systems, analysis of driving behavior, and training of drivers. With myriad alternatives of available systems and components, developers of networked driving simulation are typically confronted with high design complexity. There are no systematic approaches to date for the design of networked driving simulation in accordance with the specific requirements of the concerned application scenarios. This paper presents a novel design method for networked driving simulation. The method consists mainly of a procedure model that is accompanied by a configuration software. The procedure model includes the necessary phases for the systematic design of application-oriented platforms for networked driving simulation. The configuration software embeds supportive decision-making processes that enable developers to apply the design method and easily create different system models. The design method was validated by generating system models and developing platforms of networked driving simulation for three different application scenarios.

There is a rising global concern for the ongoing outbreak of SARS-CoV-2 due to its high transmission rate and unavailability of treatment. Through the binding of its spike glycoprotein with angiotensin type 2 (ACE2), SARS-CoV-2 can efficiently get in the cells of patients and start its pandemic cycle. Herein, the biological diversity of SARS-CoV-2 infection was assessed in Babylon province of Iraq by investigating the possible genetic variations of the spike glycoprotein. A specific coding region of 795 bp within the viral spike (S) gene was amplified from 19 patients who suffered from obvious symptoms of SARS-CoV-2 infection. Sequencing results identified fifteen novel nucleic acid variations with a variety of distributions within the investigated samples. The electropherograms of all the identified variations showed obvious co-infections with at least two different viral strains per sample. Within these co-infections, the majority of samples exhibited three nonsense single nucleotide polymorphism (SNP)s, p.301Cdel, p.380Ydel, and p.436del, which yielded three truncated SARS-CoV-2 spike glycoproteins of 301, 380, and 436 amino acids length, respectively. The network and phylogenetic analyses indicated that for all viral infections were derived from multi-ancestral origins. Results inferred from the specific clade-based tree entailed that some viral strains were derived from European G-clade sequences. In conclusion, our data demonstrated the absence of any single strain infection among all investigated viral samples in the studied area, which may entail a higher risk of SARS-CoV-2 in this country. Through the identified high frequency of truncated spike proteins, we suggest that defective SARS-CoV-2 may depend on helper strains having intact spikes in its infection. Alternatively, another putative ACE2-independent route of viral infection way also suggested. To the best of our knowledge, this is the first report to describe the co-infection of multiple strains of SARS-CoV-2 in patients with COVID-19.

On estimation scales ranging from 0.1 nm to 100 nm, the nanoscale is part of the capacitance components of the physical-synthetic and natural environment. Dimensionality, morphology, structure, uniformity, and agglomeration are all used to classify nanoparticles. Its functionality and effect on the environment and species are influenced by its shape and morphology. The priority research is to determine the effects of nanoparticles on any biological entity that is necessary when designing nanotechnology-based biotechnological and biomedical products. Bacteria have a remarkable ability to reduce metal ions, making them one of the most promising candidates for nanoparticle biosynthesis. Nanoparticles have been researched in the biomedical field for antimicrobial, biosensor, diagnostic imaging, and drug delivery applications. These natural technologies appear to be capable of producing stable nanoparticles with well-defined dimensions, morphologies, and compositions by optimizing reaction conditions and selecting the best bacteria. This work includes a list of the most commonly used microorganisms and associated Nanoparticles, as well as a discussion of current biotechnology and biomedical developments.

In the recent concrete industry, high fluidity concrete is being widely used for the pouring of dense reinforced concrete. Normally, in the case of high fluidity concrete, it includes high binder contents, so it is necessary to replace part of the cement through admixtures such as fly ash to procure economic feasibility and durability. This study shows the mechanical properties and field applicability of high fluidity concrete that using mass of fly ash as alternative materials of cement. The high fluidity concrete mixed with 50% fly ash was measured to manufacture concrete that applies low water/binder ratio to measure the mechanical characteristics as compressive strength and elastic modulus. Also, in order to evaluate the field applicability, high fluidity concrete containing high volume fly ash was evaluated that fluidity, compressive strength, heat of hydration and drying shrinkage of concrete.

The increased availability of high resolution remote sensor data for precision agriculture 1 applications permits users to aquire deeper and more relevant knowledge about crops states that lead 2 inevitably to better decisions. The algorithm libraries being developed and evolved around these 3 applications rely on multi-spectral or hyper-spectral data acquired by using manned or unmanned 4 platforms. The current state of the art makes thorough use of vegetational indicies to guide the 5 operational management of agricultural land plots. One of the most challenging sub-problems is 6 to correctly identify and separate crop from soil. Thresholding techniques based on Normalized 7 Difference Vegetation Index (NDVI) or other such similar metrics have the advantage of being simple, 8 easy to read transformations of the data packed with useful information. Obvious difficulties arise 9 when crop/tree and soil have similar spectral responses as in case of grass filled areas in vineyards. 10 In this case grass and canopy are close in terms of NDVI values and thresholding techniques will 11 generally fail. Radiometric approaches could be integrated or replaced by a geometric approach that 12 is based on terrain data like Digital Surface Models (DSMs). These models are one of the ouputs 13 of orthorectification engines usually present in data acquired by using unmanned platforms. In 14 this paper we present two approaches based on DSM that are able to segment crop/tree from soil 15 while over gradient terrain. The DSM data are processed through a two dimensional data slicing or 16 reduction technique. Each slice is separately processed as a one dimensional time series to derive the 17 terrain and tree structures separately, here interpreted as object probability densities. In particular 18 the first approach is a Cartesian grid rasterization (CARSCAN) of the terrain and the second is its 19 immediate generalisation or radial grid rasterization of the DSM model (FANSCAN). The FANSCAN 20 recovers information from the original image at greater frequencies on the Fourier plane. These 21 approaches enable the identification of crop/tree from soil in case of slopes or hilly terrain without 22 any constraint on the displacement / direction of plant/tree row. The proposed algorithm uses pure 23 DSM information even if it is possible to fuse its output with other classifiers.

On the eve of the Brexit process, in the context of a rising Euroscepticism that fuels the modest confidence of European citizens in their national and European institutions, the article assesses the efficiency and effectiveness of the European Parliament within the framework of the ordinary legislative procedure (co-decision). After defining and formulating the main indicators, the paper analyses the micro- and macro-performance of the European Parliament within the decision-making process from a quantitative-qualitative and a qualitative-quantitative perspective, highlighting the relativizing factors and the responsiveness of the European decision-making process to the Europeans’ needs.

The purpose of the present study was to investigate the effects of psychological pressure on corticospinal excitability, the spinal reflex, lower limb muscular activity, and reaction times during a task involving dominant leg movements. Ten healthy participants performed a simple reaction time task by raising the heel of their dominant foot from a switch. After 20 practice trials, participants performed 20 non-pressure and 20 pressure trials in a counterbalanced order. Stress responses were successfully induced, as indexed by significant increases in state anxiety, mental effort, and heart rates under pressure. Significant increases in motor evoked potential (MEP) amplitude of the tibialis anterior muscle (TA) occurred under pressure. In terms of task-related EMG amplitude, the co-contraction rate between the soleus (SOL) and TA muscles significantly increased along with SOL and TA EMG amplitudes under pressure. Hoffmann reflexes for SOL and reaction times did not change under pressure. These results indicate that corticospinal excitability and leg muscle-related EMG activity increase homogeneously during lower limb movements that are performed under psychological pressure.

This paper proposes several LabVIEW applications to accomplish the data acquisition, processing, features extraction and real-time classification of the electroencephalographic (EEG) signal detected by the embedded sensor of the NeuroSky Mindwave Mobile headset. The LabVIEW applications are aimed at the implementation of a Brain-Computer Interface system, which is necessary to people with neuromotor disabilities. It is analyzed a novel approach regarding the preparation and automatic generation of the EEG dataset by identifying the most relevant multiple mixtures between selected EEG rhythms (both time and frequency domains of raw signal, delta, theta, alpha, beta, gamma) and extracted statistical features (mean, median, standard deviation, route mean square, Kurtosis coefficient and others). The acquired raw EEG signal is processed and segmented into temporal sequences corresponding to the detection of the multiple voluntary eye-blinks EEG patterns. The main LabVIEW application accomplished the optimal real-time artificial neural networks techniques for the classification of the EEG temporal sequences corresponding to the four states: 0 - No Eye-Blink Detected; 1 - One Eye-Blink Detected; 2 – Two Eye-Blinks Detected and 3 – Three Eye-Blinks Detected. Nevertheless, the application can be used to classify other EEG patterns corresponding to different cognitive tasks, since the whole functionality and working principle could estimate the labels associated with various classes.

Mangrove forests store and sequester large area-specific quantities of blue carbon (C_org). Except for tundra and peatlands, mangroves store more C_org per unit area than any other ecosystem. Mean mangrove C_org stock is 738.9 Mg C_org ha⁻¹ and mean global stock is 6.17 Pg C_org, which equates to only 0.4–7% of terrestrial ecosystem C_org stocks but 17% of total tropical marine C_org stocks. Seagrasses sequester more C_org per unit area than mangroves (179.6 g C_org m⁻²·a⁻¹) but twice the C_org sequestered by mangroves globally (15 Tg C_org a⁻¹). Mangroves sequester only 4% (range 1.3–8%) of C_org sequestered by terrestrial ecosystems, indicating that mangroves are a minor contributor to global C storage and sequestration. CO₂ emissions from mangrove losses equate to 0.036 Pg CO₂-equivalents a⁻¹ based on rates of C sequestration but 0.088 Pg CO₂-equivalents a⁻¹ based on complete destruction for conversion to aquaculture and agriculture. Mangrove CO₂ emissions account for only 0.2% of total global CO₂ emissions but 18% of CO₂ emissions from the tropical coastal ocean. Despite significant data limitations, the role of mangrove ecosystems in climate change mitigation is globally insignificant but may be more significant and effective at the national and regional scale.

Angiogenesis is a complex process that involves interactions between endothelial cells and various other cell types as well as the tissue microenvironment. Several previous studies have demonstrated that mast cells accumulate at angiogenic sites. In spite of the evidence suggesting a relationship between mast cells and angiogenesis, the association of mast cells and endothelial cells remains poorly understood. The present study aims to investigate the relationship between mast cells and endothelial cells during in vitro angiogenesis. When endothelial cells were co-cultured with mast cells, angiogenesis was stimulated. Furthermore, there was direct intercellular communication via gap junctions between the two cell types. In addition, the presence of mast cells stimulated endothelial cells to release angiogenic factors. Moreover, conditioned medium from the co-cultures also stimulated in vitro angiogenesis. The results from this investigation demonstrate that mast cells have both direct and indirect proangiogenic effects and provide new insights into the role of mast cells in angiogenesis.

In order to understand the effect of Pb-CuI co-doping on the thermoelectric performance of Bi₂Te₃, n-type Bi₂Te₃ co-doped with x at% CuI and 1/2x at% Pb (x = 0, 0.01, 0.03, 0.05, 0.07, and 0.10) were prepared via high temperature solid state reaction and consolidated using spark plasma sintering. Electron and thermal transport properties, i.e., electrical conductivity, carrier concentration, Hall mobility, Seebeck coefficient, and thermal conductivity, of CuI-Pb co-doped Bi₂Te₃ were measured in the temperature range from 300 K to 523 K and compared to corresponding x% of CuI-doped Bi₂Te₃ and undoped Bi₂Te₃. The addition of a small amount of Pb significantly decreased the carrier concentration, which could be attributed to the holes from Pb atoms, thus the CuI-Pb co-doped samples show a lower electrical conductivity and a higher Seebeck coefficient compared to CuI-doped samples with similar x values. The incorporation of Pb into CuI-doped Bi₂Te₃ rarely changed the power factor because of the trade-off relationship between the electrical conductivity and the Seebeck coefficient. The total thermal conductivity(κ_tot) of co-doped samples (κ_tot ~1.4 W/m∙K at 300 K) is slightly lower than that of 1% CuI-doped Bi₂Te₃ (κ_tot~1.5 W/m∙K at 300 K) and undoped Bi₂Te₃ (κ_tot ~1.6 W/m∙K at 300 K) due to the alloy scattering. The 1% CuI-Pb co-doped Bi₂Te₃ sample shows the highest ZT value of 0.96 at 370 K. All data on electrical and thermal transport properties suggest that the thermoelectric properties of Bi₂Te₃ and its operating temperature can be controlled by co-doping.

Data from Earth Observation (EO) satellites are increasingly used to monitor the environment, understand variability and change, inform evaluations of climate model forecasts and manage natural resources. Policy makers are progressively relying on the information derived from these datasets to make decisions on mitigating and adapting to climate change. These decisions should be evidence based, which requires confidence in derived products as well as the reference measurements used to calibrate, validate or inform product development. In support of the European Union’s Earth Observation Programmes Copernicus Climate Change Service, the Quality Assurance for Essential Climate Variables (QA4ECV) project fulfilled a gap in the delivery of climate quality satellite derived datasets by prototyping a robust, generic system for the implementation and evaluation of Quality Assurance (QA) measures for satellite-derived ECV climate data record products. The project demonstrated the QA system on six new long-term, climate quality ECV data records for surface Albedo, Leaf Area Index, FAPAR, NO₂, HCHO and CO. Provision of standardized QA information provides data users with evidence-based confidence in the products and enables judgement on the fitness-for-purpose of various ECV data products their specific applications.

Background: The efficacy of sunscreen is evaluated by SPF values, which are quantitatively determined in laboratories on the backs of human subjects according to a standardized procedure. However, SPF cannot be directly translated to sunburn protection under real-life situations because actual efficacy depends on various factors related to human behaviors and environmental conditions. This study clinically evaluated the efficacy of two sunscreen sprays (SPF 30 and SPF 70) under natural sunlight exposure on healthy subjects at the beach. Methods: Twenty subjects were divided into two cells for the two sunscreen sprays (SPF 70 and SPF 30) in a single-center, actual usage test. The primary endpoint of the study was sunburn protection on the dorsal arms and the secondary endpoint was protection on the face and neck. Subjects stayed at the beach for 4 h after application of the sunscreens with normal beach activities. Subjects’ behavior at the beach, the amounts of sunscreen applied and reapplied, and environmental conditions were all recorded. Results: There was no significant sunburn for a majority of the subjects in either cell. However, neither sunscreen completely blocked the sunburn, especially for the face/neck area. We found that the SPF 70 sunscreen was more effective than the SPF 30 sunscreen. Conclusion: Modern sunscreen sprays, applied liberally, are effective in providing sunburn protection for the body in a beach setting.

This research proposed in this paper focuses on gathering evidence from devices with Windows 10 operating systems in order to discover and collect artifacts left by cloud storage applications that suggest their use even after the deletion of the Google client application. We show where and what type of data remnants can be found using our analysis which can be used as evidence in a digital forensic investigations.

A copula is a useful tool for constructing bivariate and/or multivariate distributions. In this article, we consider a new modified class of (Farlie-Gumbel-Morgenstern) FGM bivariate copula for constructing several dierent bivariate Kumaraswamy type copulas and discuss their structural properties, including dependence structures. It is established that construction of bivariate distributions by this method allows for greater flexibility in the values of Spearman's correlation coefficient rho,  and Kendall's tau . For illustrative purposes, one representative data set is utilized to exhibit the applicability of these proposed bivariate copula models.

General Variable Neighborhood Search (GVNS) is a well known and widely used metaheuristic for efficiently solving many NP-hard combinatorial optimization problems. Quantum General Variable Neighborhood Search (qGVNS) is a novel, quantum inspired extension of the conventional GVNS. Its quantum nature derives from the fact that it takes advantage and incorporates tools and techniques from the field of quantum computation. Travelling Salesman Problem (TSP) is a well known NP-Hard problem which has broadly been used for modelling many real life routing cases. As a consequence, TSP can be used as a basis for modelling and finding routes for Geographical Systems (GPS). In this paper, we examine the potential use of this method for the GPS system of garbage trucks. Specifically, we provide a thorough presentation of our method accompanied with extensive computational results. The experimental data accumulated on a plethora of symmetric TSP instances (symmetric in order to faithfully simulate GPS problems), which are shown in a series of figures and tables, allow us to conclude that the novel qGVNS algorithm can provide an efficient solution for this type of geographical problems.

The aim of this study was synthesize and evaluate the effects of Poly (D, L-Lactide-co-glycolide) (PLGA) Nanoparticles (NPs) of metformin (PLGA+ Met) on inflammation, and bone loss in a ligature-induced periodontitis rat model. The prepared NPs were characterized by mean diameter, size particle, polydispensity index and encapsulation efficiency by Atomic force microscopy (AFM). Male albino Wistar rats were randomly divided into four groups of 20 rats in each group, and given the following treatments for 10 days to evaluate in vivo activity: (1) Sham: no ligature + water; (2) Positive control: ligature + water (with Periodontal disease and Diabetes); (3) ligature + PLGA+ 10 mg/kg Met (With Periodontal disease and Diabetes); and (4) ligature + PLGA+ 100 mg/kg Met (with Periodontal disease and Diabetes). Water or PLGA + Met was administered orally by gavage. Maxillae were fixed and scanned using Micro-computed Tomography (μCT) to quantify linear of bone loss. Histopathological characteristics were assessed through immunohistochemical staining for Osteocalcin, Cathepsyn K, RANKL/RANK/OPG pathway. IL-1β and TNF-α from gingival tissues were analysed by Elisa immunoassay. Quantitative RT-PCR reaction was used to evaluate gene expression of AMPK, NF-κB p-65, Hmgb1 and TAK-1 from gingival tissues. Statistical analysis was performed using one-way ANOVA at 5% significance. The mean diameter of MET-loaded PLGA nanoparticles was in a range of 457.1 ± 48.9 nm with a polydispersity index of 0.285, zeta potential: 8.16 ± 1.1 mV and entrapment efficiency (EE) was 70%. The results suggest that the addition of MET in the core slightly affected the particle sizes. Treatment with PLGA+ 10 mg/kg Met showed low inflammatory cells, decreased bone loss and integrity cement and levels of IL-1β, and TNF-α (p < 0.05) were significantly reduced. Additionally, weak staining was shown by RANKL, Cathepsyn K, OPG, and osteocalcin. Radiographically, linear measurements showed a statistically significant reduction in bone loss after treatment with PLGA+ 10 mg/kg Met compared to the positive control (p < 0.05). RT-PCR showed increased AMPK expression (p < 0.05) and decreased expression of NF-κB P65, HMGB1 and TAK-1 after PLGA+ 10 mg/kg Met (p < 0.05). The PLGA nanoparticle + 10 mg/kg Met decreased glucose levels and also decreased the inflammatory response, and bone loss in ligature-induced periodontitis in rats.

Within the past several decades, the emergence of new viral diseases with more severe health complications and mortality, primarily in older adults with comorbidities, is evidence of an age-dependent, compromised bodily response to abrupt stress with concomitant reduced immunity. The emergence of new infectious coronaviruses such as SARS-CoV-2 has resulted in the coronavirus disease 2019 (COVID-19). The result is increased morbidity and mortality in persons with underlying chronic diseases and among those with compromised defense mechanisms, regardless of age and among older adults who are more likely to fit these categories. COVID-19 appears to be primarily an upper respiratory disease. While SARS-CoV-2 is highly virulent, there is variability in the severity of the disease and its complications in humans. Severe pneumonia, acute respiratory distress syndrome (ARDS), lung fibrosis, cardiac t complication, acute kidney injury, hospitalization, and high mortality have been reported in older adults with COVID-19, that result from pathogen-host interactions. Here, we review potential interactions of the coronavirus and host cellular responses in relation to hallmarks of aging including genomic instability, telomere attrition, impaired autophagy, mitochondrial dysfunction, innate immunosenescence, inflammation and inflammasomes, adaptive immunosenescence, and epigenetic alterations, that likely contribute to the increased pathophysiological responses to SARS-CoV-2 among older adults.

Cu,N-TiO₂ nanotube (Cu,N-TNT) is prepared through a novel magnetron sputtering and anodic oxidation method. Then the morphology, structure and physicochemical property of Cu,N-TNT was analyzed by XRD, SEM, TEM, EDX and UV-vis-DR. The results indicate that the evenly doped copper is beneficial to the transformation of the TNT from anatase to rutile and play a key role in the morphology of the Cu,N-TNT. The doped Cu and N in the TNT influence the growth orientation of the TiO₂ crystals, which result in the lattice distortion and wider the interplanar spacing 60s-Cu,N-TNT has less band gap and stronger absorption intensity in visible region than other Cu,N-TNT samples, which make the combination rate of photogenerated electron and photogenerated hole decrease greatly, thus beneficial to its physicochemical property.

We describe the innate and adaptive immune system trajectory in Multi-system inflammatory syndrome of childhood (MIS-C), at acute(within 72 hours of hospitalization), resolution (at clinical improvement) and convalescent phase. In our cohort, in the acute phase, 68% of the children were SARS-CoV-2 seropositive, with hypercytokinenemia (high interleukin(IL)-1beta,IL-6,IL-8,IL-10,IL-17, interferon gamma), procoagulant state, myocardial dysfunction, activated neutrophils and monocytes; differential T and B cell subset lymphopenia; activated chemokine receptor type-7 positive and gamma-delta T cell subsets; antigen presenting cells had reduced HLA-DR expression; and B-cell class-switch responses occurred with illness resolution. MIS-C is an immunopathogenic illness associated with SARS-CoV-2 infections in children.

This paper investigates the effects of Inter-generational co-residence on health care market, and labor market outcomes, to see whether or not living under the same roof with at least one parent matters in health care market, and labor market behaviors in post-Affordable-Care Act (ACA) USA. The adopted analytical strategy involves not only looking at the gender differences in co-residence, and its effects on outcomes in the two markets, but also accounting for co-residence endogeneity following the recent literature. Unlike the recent literature that relies on instrumental variables methods, this study adopts a switching regression approach, defining inter-generational co-residence as an endogenous selection process using a binary probit equation, and modeled jointly with the extensive margins and intensive margins in the two markets. This novel approach results in a recursive trivariate probit model for each market, and estimated using penalized maximum likelihood methods. The results suggest that ACA by reorganizing the US health care market, seems to have reduced significantly disparities in health care access among males and females based on race, region of residence, place of birth, and citizenship. However not only do we observe significant differences in inter-generational co-residence status between males and females, we also find significant inequalities in the effects of co-residence on health care market, and labor market outcomes. In fact, co-residence is found to increase health care expenditure by 56.7% among females, while this figure increases to 74.2% among males. In addition co-residing individuals, while spending 69.7% more on health care annually are 1.22 times more likely to access health care, but 31% less likely to use health care intensively during the year. In the labor market, co-residence is found to reduce significantly hours of weekly labor supplied by 41% for females, and 55.6% for males. Furthermore co-residing individuals, while not significantly different in their likelihood of labor force participation, are 1.52 times less likely to work full time once they decide to participate, and also spend about 55.4% less time working in the labor market in post-ACA USA.

In this work, we focus on investigating electrothermal flow in a rotating electric field (ROT-ETF), with primary attention paid to the horizontal traveling-wave electrothermal (TWET) vortex induced at the center of the electric field. The frequency-dependent flow profiles in the microdevice are analyzed using different heat transfer models. Accordingly, we address in particular the importance of electrode cooling in ROT-ETF as metal electrodes of high thermal conductivity while substrate material of low heat dissipation capability are employed to develop such microfluidic chips. Under this circumstance, cooling of electrode array due to external natural convection on millimeter-scale electrode pads for external wire connection occurs and makes the internal temperature maxima shift from the electrode plane to a bit of distance right above the cross-shaped interelectrode gaps, giving rise to reversal of flow rotation from a typical repulsion-type to attraction-type induction vortex, which is in good accordance with our experimental observations of co-field TWET streaming at frequencies on the order of reciprocal charge relaxation time of the bulk fluid. These results point out a way to make a correct interpretation of out-of-phase electrothermal streaming behavior, which holds great potential for handing high-conductivity analytes in modern microfluidic systems.

Direct georeferencing of airborne pushbroom scanner data usually suffers from the limited precision of navigation sensors onboard of the aircraft. The bundle adjustment of images and orientation parameters, used to perform geocorrection of frame images during the post-processing phase, cannot be used for pushbroom cameras without difficulties: it relies on matching corresponding points between scan lines, which is not feasible in the absence of sufficient overlap and texture information. We address this georeferencing problem by equipping our aircraft with both a frame camera and a pushbroom scanner: the frame images and the navigation parameters measured by a couple GPS/Inertial Measurement Unit (IMU) are input to a bundle adjustment algorithm; the output orientation parameters are used to project the scan lines on a Digital Elevation Model (DEM) and on an orthophoto generated during the bundle adjustement step; using the image feature matching algorithm Speeded Up Robust Features (SURF), corresponding points between the image formed by the projected scan lines and the orthophoto are matched, and through a least-squares method, the boresight between the two cameras is estimated and included in the calculation of the projection; finally, using Particle Image Velocimetry (PIV) on the gradient image, the projection is deformed into a final image that fits the geometry of the orthophoto. We apply this algorithm to five test acquisitions over Lake Geneva region (Switzerland) and Lake Baikal region (Russia). The results are quantified in terms of Root Mean Square Error (RMSE) between matching points of the RGB orthophoto and the pushbroom projection. From a first projection where the Interior Orientation Parameters (IOP) are known with limited precision and the RMSE goes up to 41 pixels, our geocorrection estimates IOP, boresight and Exterior Orientation Parameters (EOP) and produces a new projection which RMSE with the reference orthophoto is around two pixels.

The dye effluent is usually difficult to be degraded by conventional wastewater treatment in leather industry. In order to develop efficient and cost-effective treatment methods, we evaluate the effect of white-rot fungus immobilization for dye decolorisation in this paper. The Phanerochaete chrysosporium BKM-F-1767 was used for immobilization. This research found that the white-rot fungus immobilization had an obviously decolorisation effect in dye wastewater treatment, and plant carriers such as sorghum stalk and corn cob were helpful to the growth of Phanerochaete chrysosporium in white-rot fungus immobilization. Due to the stability and recyclability, the white-rot fungus co-immobilization was considered as the most suitable treatment for decolorisation of dye effluent which enjoyed the advantages of both adsorption immobilization and entrapment immobilization. Furthermore, the dye decolorisation evaluation was carried out to find the most suitable carrier for co-immobilization, and it found that sorghum stalk - calcium-alginate gel spherical particle (SS-CGPB) has better decolorisation effect than corn cobs - calcium-alginate gel spherical particle (CC-CGPB), and the dye decolorisation rate was 86.77%. After 5 cycles, the dye decolorisation rate was 85.87% which indicated the SS-CGPB preserved functional integrity successfully. By further analyzing the biodegradation process with white-rot fungus immobilization, the intermediate products were observed and the degradation pathway of acid golden yellow dye molecular was proposed. The results showed that the C-N single bonds attached to the central benzene in the dye molecule were attacked and destroyed in white-rot fungus co-immobilization treatment, thus the structure of dye molecule could be successfully degraded into small molecules which would be more easily treated by conventional treatment methods. Therefore, the white rot fungus co-immobilization might be appropriate for pre-treatment as an important biotechnology for the advanced treatment of dye effluent.

It is well known that that there is an intrinsic link between the financial and energy sectors, which can be analyzed through their spillover effects, which are measures of how the shocks to returns in different assets affect each other’s subsequent volatility in both spot and futures markets. Financial derivatives, which are not only highly representative of the underlying indices, but can also be traded on both the spot and futures markets, include Exchange Traded Funds (ETFs), a tradable spot index whose aim is to replicate the return of an underlying benchmark index. When ETF futures are not available to examine spillover effects, “generated regressors” are useful for constructing both Financial ETF futures and Energy ETF futures. The purpose of the paper is to investigate the co-volatility spillovers within and across the US energy and financial sectors in both spot and futures markets, by using “generated regressors” and a multivariate conditional volatility model, namely Diagonal BEKK. The daily data used are from 1998/12/23 to 2016/4/22. The data set is analyzed in its entirety, and are also subdivided into three distinct subsets. The empirical results show there is a significant relationship between the Financial ETF and Energy ETF in the spot and futures markets. Therefore, financial and energy ETFs are suitable for constructing a financial portfolio from an optimal risk management perspective, and also for dynamic hedging purposes.

Contact-based co-culture of fibroblasts and keratinocytes is important to study the structure and functions of the wound bed. Co-culture of these two cell types in direct contact with each other has been challenging, requiring high serum concentrations (up to 10%), feeder systems and a range of supplemental factors. These approaches are not only technically demanding, but also present scientific, cost and ethical limitations associated with high-serum concentrations. We have developed two reduced-serum approaches (1-2%) to support contact-based co-culture of human dermal fibroblasts (HDFa) and human epidermal keratinocytes (HaCaT). The two approaches include (1) Specialized cell culture media for each cell type mixed in a 1:1 ratio (KGM+FGM), and (2) Minimal media supplemented with cell-specific growth factors (MEM+GF). Co-culture could be successfully achieved by co-seeding (two cell types were introduced simultaneously), or in a layered fashion (keratinocytes seeded on top of confluent fibroblasts). With wound scratch assays, the co-cultured platforms could demonstrate cell proliferation, migration and wound closure. The reduced-serum conditions developed are simple, easy to formulate and adopt, and based on commonly-available media components. These contact-based co-culture approaches can be leveraged for wound and skin studies, and tissue bioengineering applications, potentially reducing concerns with high-serum formulations.

Various tissue resident stem cells are receiving attention from basic scientists and clinicians as they hold certain promise for regenerative medicine. This paper is intended to clarify and facilitate the understanding, development and adoption of regenerative medicine in general and specifically of therapies based on unmodified, autologous adipose-derived regenerative cells (UA-ADRCs). To this end, results of landmark experiments on stem cells and stem cell therapy performed in the labs of the authors are summarized, the most intriguing of which are the following: (i) vascular associated mesenchymal stem cells (MSCs) can be isolated from different organs (adipose tissue, heart, skin, bone marrow and skeletal muscle) and differentiated into ectoderm, mesoderm and endoderm, providing significant support for the hypothesis of the existence of a small, ubiquitously distributed, universal vascular associated stem cell with full pluripotency; (ii) the orientation and differentiation of MSCs are driven by signals of the respective microenvironment; and (iii) these stem cells irrespective of the tissue origin exhibit full pluripotent differentiation potential without any prior genetic modification or the need for culturing. They can be obtained from a small amount of adipose tissue when using the appropriate technology for isolating the cells, and can be harvested from and re-applied to the same patient at the point of care without the need for complicated processing, manipulation, culturing, expensive equipment, or repeat interventions. These findings demonstrate the potential of UA-ADRCs for triggering the development of an entire new generation of medicine for the benefit of patients and of healthcare systems.

Ti64 alloy plays a significant role in the biomedical applications such as bioimplants for its excellent biocompatibility. Its usage can be further extended by improving the surface hardness and wear resistance. In this respect, laser surface glazing (LSG), an advanced surface modification technique, is very useful which can produce thin hardened surface layer and strong metallurgical bonding. Investigation of temporal and spatial temperature distributions of laser glazed surface of materials are essential because temperature plays significant role in achieving required surface properties. Therefore, in this study, a 3D Finite element analysis has been developed to perform transient thermal analysis of LSG for Ti64 alloy. The model investigated temperature distribution, depth of modified zone and heating and cooling. The results show that the peak temperature is attained 2095 K for 300 W laser power, 0.2 mm beam width and 0.15 ms residence time. Since this temperature is above the melting point (1933 K) of Ti64 alloy, the melt depth is calculated 22.5 μm. Furthermore, from the simulation results, the average heating and cooling rates are estimated 1.19×10⁷ Ks^-1 and 2.71×10⁶ Ks^-1 respectively which indicate the presence of hard phases in the modified zone.

This study reports on empirical findings of participatory design workshops for the development of a supportive user experience design system in the automotive. Identifying and addressing this area with traditional research methods is problematic due to the different UX design perspectives that might be conflicting and the related automotive domain limitations. To help resolve this problem, we conducted research with 12 User Experience (UX) designers through individual participatory prototyping activities to gain insights on their explicit, observable, tacit and latent needs. These activities allowed us to explore their motivation to use different technologies; the system's architecture; detailed features of interactivity and describe user needs including Efficiency, Effectiveness, Engagement, Naturalness, Ease of Use, Information retrieval, Self-Image awareness, Politeness, and Flexibility. Our analysis led us to design implications that translate participants' needs into UX design goals, informing practitioners on how to develop relevant systems further.

Crotoxin (CTX), the predominant toxin in Crotalus durissus terrificus snake venom (CdtV), has anti-inflammatory and immunomodulatory effects. Despite its inhibitory action on neutrophil migration and phagocytosis, CTX does not directly affect the production of reactive oxygen species (ROS) by the neutrophils. In contrast, it enhances the generation of reactive oxygen and nitrogen intermediates by macrophages. Given the importance of macrophage-neutrophil interactions in innate antimicrobial defense, the aim of this study was to investigate the effect of CTX on neutrophil ROS production and killing activity, either through CTX-treated macrophage co-culture or conditioned medium of CTX-treated macrophages. The results showed an important modulatory action of CTX on the neutrophil function as well as neutrophil-macrophage interactions, as demonstrated by the increased production of hydrogen peroxide, hypochlorous acid, nitric oxide and TNF-α, along with the increased fungicidal activity of neutrophils.

This study investigated whether biogas reactor performance, including microbial community development, in response to a change in substrate composition is influenced by initial inoculum source. Test reactors were first started with two different inocula and operated with the same grass-manure mixture for more than 120 days. These reactors initially showed great differences depending on inoculum source, but eventually showed similar performance and overall microbial community structure. At the start of the present experiment, the substrate was complemented with milled feed wheat, added all at once or divided into two portions. The starting hypothesis was that process performance depends on initial inoculum source and microbial diversity, and thus that reactor performance is influenced by the feeding regime. In response to the substrate change, all reactors showed increases and decreases in volumetric and specific methane production, respectively. However, specific methane yield and development of the microbial community showed differences related to initial inoculum source, confirming the hypothesis. The different feeding strategies had however only minor effects on process performance and overall community structure, but still induced differences in the cellulose-degrading community and in cellulose degradation.

Elevated antimony concentrations in aqueous environments from anthropogenic sources is becoming of global concern, here iron oxides are known to strongly adsorb aqueous antimony species with different oxidation states, but the effect of silica on the removal characteristics is not well understood despite being a common component in the environment. In this study, ferrihydrite was synthesized at various Si/Fe molar ratios to investigate its adsorption and co-precipitation behaviors with aqueous antimony anionic species, Sb(III) and Sb(V). The XRD analyses of the precipitates showed two broad diffraction features at approximately 35° and 62° 2θ, which are characteristic of 2-line ferrihydrite, no significant shifts in peak positions in the ferrihydrite regardless of the Si/Fe ratios. The infrared spectra showed a sharp band at ~990 cm⁻¹, corresponding to asymmetric stretching vibrations of Si-O-Fe bonds which increased in intensity with increasing Si/Fe molar ratios. Further, the surface charge on the precipitates became more negative with increasing Si/Fe molar ratios. The adsorption experiments indicated that Sb(V) was preferentially adsorbed at acidic conditions and decreased dramatically with increasing pH while the adsorption rate of Sb(III) ions was independent of pH, however, the presence of silica suppressed the adsorption of both Sb(III) and Sb(V) ions. The results showed that Sb(III) and Sb(V) ions were significantly inhibited by co-precipitation with ferrihydrite even in the presence of silica by isomorphous substitution in the ferrihydrite crystal structure.

The energy crisis and environmental problems are becoming more and more severe due to the long-term consumption of fossil fuels. Therefore, energy conversion devices with high energy density and environmental friendliness (such as fuel cells, metal-air batteries, etc.) have been ex-pected to be reliable alternatives to traditional fossil energy. However, due to the inevitable use of precious metals as the electrode catalysts for these devices, the popularization of these alternatives is seriously hindered. Transition metal nitrides (TMNs) exhibit similar surface and adsorption properties to noble metals since the atomic distance between metal atoms increases and the d-band center of metal atoms downshift after the nitrogen atoms enter the metal lattice. TMNs have become one of the best electrode materials to replace noble metal electrocatalysts in energy storage and conversion devices. In this review, the latest development in the electrocatalytic ap-plication of TMNs nanocrystalline is covered. Firstly, we briefly discuss the structure and activity origin of TMNs and introduce the common physical and chemical methods for the preparation of TMNs. Subsequently, we illustrate the applications of unary TMNs and multivariate TMNs in oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Finally, we summarize the challenges and problems of TMNs encountered at the present stage, and expect its future de-velopment.

In the recent decade, Building Information Modelling (BIM) has widely been adopted in the Architecture, Engineering and Construction (AEC) industry and completely upended the way we build. While BIM continues gain momentum in the industry, it has also attracted increasing attentions from researchers. However, most of the current study focuses on reviewing BIM for management, BIM for green building, BIM for infrastructure and BIM for Facilities Management (FM). There are few studies about Global BIM review and to discuss their complex inter-connections. In this study, we adopted a scientometric analysis method to review global BIM research from 2004-2019. A total of 1455 scholarly bibliographic records obtained from Web of Science Core Collection databased were established for the analysis. This study has identified the top productive and influential researchers, research institutes, regions/countries, subject categories and journals in the BIM field. In addition, 11 clusters of Global BIM research were also identified including construction project, green BIM, construction safety planning, automated IFC-based workflow and so on. Authors distinguished 11 clusters of global BIM research into 3 stages, namely formulating stage, accelerating stage and transforming stage. Furthermore, authors reviewed the BIM policy of Singapore and observed there is a co-production relationship between evolution of BIM policy and global BIM research. These findings provide valuable information for researchers, practitioners and policy makers by visualizing the current progress in the research field of BIM and highlighting future research needs.

Avian infectious bronchitis virus (IBV) is the causative agent of infectious bronchitis, which causes considerable economic losses to the poultry industry worldwide. It is imperative to develop safe and efficient candidate vaccines to control IBV infection. In the current study, recombinant baculoviruses co-expressing S1 and N proteins, mono-expressing S1 or N proteins alone of IBV were constructed and prepared into subunit vaccines rHBM-S1-N, rHBM-S1 and rHBM-N. The levels of immune protection of these subunit vaccines were evaluated by inoculating specific pathogen-free (SPF) chickens at 14 days of age, boosting with the same dose 14 days later, and following challenge with a virulent GX-YL5 strain of IBV 14 days post-booster (dpb). The commercial vaccine strain H120 was used as a control. The IBV-specific antibody levels as well as the percentages of CD4+ and CD8+ T lymphocytes were detected within 28 days post-vaccination (dpv). The morbidity, mortality, and re-isolation of virus from the tracheas and kidneys of challenged birds were evaluated at 5 days post-challenge (dpc). The results showed that the IBV-specific antibody levels and the percentages of CD4+ and CD8+ T lymphocyte in rHBM-S1-N group were higher than those of rHBM-S1 and rHBM-N groups, especially the cellular immunity response. At 5 dpc, the mortality, morbidity and virus re-isolation rate of rHBM-S1-N were slightly higher than those of H120 group, but were lower than those of rHBM-S1 group and rHBM-N group. The present study demonstrated that the protection of recombinant baculovirus co-expressing S1 and N proteins was better than that of recombinant baculoviruses mono-expressing S1 or N protein alone. Thus, the recombinant baculovirus co-expressing S1 and N proteins could serve as a potential IBV vaccine and this demonstrates that the bivalent subunit vaccine including the S1 and N proteins might be a strategy for the development of an IBV subunit vaccine.

A huge number of applications available for Android-based smartphone devices have emerged over the past years. Due to which a huge number of malicious applications has been growing explosively. Many approaches have been proposed to ensure the security and quality of application in the markets. Usually, Machine Learning approaches are utilized in the classification process of malicious application detection. Calculating accurate results of characterizing applications behaviors, or other features, has a direct effect on the results with Machine Learning calculations. Android applications emerge so quickly. The behavior of current applications has gotten progressively malicious. The extraction of malware-infected features from applications is thus become a difficult task. According to our knowledge, a ton of features have been extricated in existing work however no survey has overviewed the features built for identifying malicious applications efficiently. In this paper, we will in general give an extensive review of such sort of work that identifies feature applications by describing various practices of uses with various kinds of features. In this survey we have discussed the following dimensions: extraction and selection of feature methods if any, methods of detection and evaluation performed. In light of our review, we notice the issues of investigating malware-affected features from applications, give the scientific categorization and demonstrate the future headings.

Simulation tools capturing the interactions of communication and electrical system operation represent a powerful support for fully assessing the potential benefits and impacts of ICT in future smart power distribution network. A strong interest is upon the possibility of exploiting the last generation communication systems for supporting the transition of distribution network towards a smart grid scenario. Having in mind the above, the authors propose a numerical co-simulation tool useful to thoroughly understand the impact of the communication networks on the performance of whole power system dynamics. The co-simulation tool has been purposely developed to simulate the highly time-critical smart grid application of fault management and network reconfiguration and permits reproducing and evaluating the behavior of the public mobile telecommunication system 4G Long Term Evolution (LTE), as communication technology for smart grid applications. Results of the paper demonstrates that LTE provides good performances for supporting the data communication required to perform fault location, extinction and a subsequent network reconfiguration in smart power distribution networks.

Ocean big data is the scientific practice of using big data technology in the marine field. Data from satellites, manned spacecraft, space stations, airship, unmanned aerial vehicles, shore-based radar and observation stations, exploration platforms, buoys, underwater gliders, submersibles, and submarine observation networks are seamlessly combined into the ocean’s big data. Increasing numbers of scholars have tried to fully analyze the ocean’s big data. To explore the key research technology knowledge graphs related to ocean big data, articles between 1990 and 2020 were collected from the “Web of Science”. By comparing bibliometric software and using the visualization software Cite-Space, the pivotal literature related to ocean big data, as well as countries, institutions, categories, and keywords, were visualized and recognized. Journal co-citation analysis networks can help determine the national distribution of core journals. Co-citation analysis networks for documents show authors who are influential at key technical levels. Key co-occurrence analysis network keywords can determine research hot spots and research frontiers. The three supporting elements of marine big data research are shown in the co-citation network. These elements are author, institution, and country. By examining the co-occurrence of keywords, the key technology research directions for future marine big data were determined.

This paper presents a comprehensive analysis of the scholarly footprint of ChatGPT, an AI language model, using bibliometric and scientometric methods. The study aims to understand the evolution of research output, citation patterns, collaborative networks, application domains, and future research directions related to ChatGPT. By analyzing data from the Scopus database, 533 relevant articles were identified for analysis. The findings reveal the prominent publication venues, influential authors, and countries contributing to ChatGPT research. Collaborative networks among researchers and institutions are visualized, highlighting patterns of co-authorship. The application domains of ChatGPT, such as customer support and content generation, are examined. Moreover, the study identifies emerging keywords and potential research areas for future exploration. The methodology employed includes data extraction, bibliometric analysis using various indicators, and visualization techniques such as Sankey diagrams. The analysis provides valuable insights into ChatGPT's influence in academia and offers researchers guidance for further advancements. This study stimulates discussions, collaborations and innovations to enhance ChatGPT's capabilities and impact across domains.

Degussa P25 is a benchmark form of TiO₂ used worldwide in photocatalysis studies. Currently no such benchmark exists for co-catalysts, which are essential for many photocatalytic reactions. Here, we present the preparation of Pt nanocluster co-catalysts on TiO₂ using an unmodified commercial source and equipment that is commonly available. Transmission electron microscopy reveals that the procedure produces TiO₂ decorated with Pt atom and nanoclusters (1-5 atoms). Optical reflectance and X-ray diffraction measurements show that the procedure does not affect the TiO₂ polymorph or UV-Vis absorbance. Gas phase photocatalytic splitting of heavy water (D₂O) shows that the Pt nanocluster decorated TiO₂ outperforms Pt nanoparticle (produced by photodeposition) decorated TiO₂ in D₂ production. Pt nanoclusters, produced directly from a commercial source, with high co-catalyst activity are prime candidates to be used in benchmark photocatalytic reactions.

It is since long known, that SAW devices, resonators as well as delay lines, can be used as passive wireless sensors for physical quantities like temperature and pressure as well as gas sensors or ID-Tags. The sensors are robust, work passively without battery, can be applied at high temperatures and provide a high resolution. Nevertheless, if the devices should be readout wirelessly in an industrial environment, several constraints have to be taken into account, especially when more than one quantity or device needs to be measured at the same time. The paper addresses the challenges that have to be tackled when establishing multi-sensor-wireless-readout for industrial applications. Major issues here are the legal ISM-band regulations, as well as sampling time and costs, which impose severe restrictions to any system design. We describe several design approaches and their constraints. We have successfully designed sensors based on reflective delay lines that allow the parallel readout of four independent temperature sensors in the 2.45 GHz ISM-band. These devices have been fabricated, positively tested and demonstrate the applicability of SAW sensors for industrial applications.

Hormones must be balanced and dynamically controlled for the Female Reproductive Tract (FRT) to function correctly during the menstrual cycle, pregnancy, and delivery. Gamete selection and successful transfer to the uterus, where it implants and pregnancy occurs, is supported by the mucosal epithelial lining of the FRT ovaries, uterus, cervix, fallopian tubes, and vagina. Successful implantation and placentation in humans and other animals rely on complex interactions between the embryo and a receptive female reproductive system. The FRT's recent breakthroughs in three-dimensional (3D) organoid systems now provide critical experimental models that match the organ's physiological, functional, and anatomical characteristics in vitro. This article summarizes the current state of the art on organoids generated from various parts of the FRT. The current analysis examines recent developments in the creation of organoid models of reproductive organs, as well as their future directions.

This paper addresses pastoral resilience by drawing out the coping strategies and mechanisms utilized by the Maasai Pastoralists through a food system approach, based on the study findings of an anthropological study of pastoralism in Laikipia County, Rift Valley, Kenya. This paper is guided by the specific objectives aimed at establishing actors and their roles, and describing the institutional settings and changes in pastoralism. Using a new institutionalism approach, the paper focuses not only on the actors and their roles in pastoralism but also on how internal and external forces regulate access and use of common pool resources (CPRs) resulting in sustainability of the food system. We argue that this has an impact on the practice of pastoralism that continually defines and redefine the actors’ roles as well as elicit the value of pastoral economies and benefits accrued to a wide range of actors hence reinforcing pastoral resilience. The study also identified institutional settings and changes that lead to pastoral survival resulting from the country’s devolved system of governance. Data collection was through in-depth interviews, key informant interviews, focus group discussions and unstructured observations in the pastoral regions. The findings reveal that actors at the household, state, non-state, and service providers have developed varied coping strategies and mechanisms that sustain pastoralism. The study also identified institutional settings and changes that promote pastoral resilience; notably, private land ownership patterns, co-management of livestock markets, commercialization of herding, decentralization of livestock services, holistic management of pasturelands and the use of water-shed management plans. As a result, increased scholarship and advocacy in regards to the concept of co-management of livestock markets, is recommended as a means of understanding pastoral resilience that the food system exhibits.

Hydrogen is useful as a fuel and could be produced by a variety of means. One approach uses artificial photosynthesis where energy from sunlight powers the splitting of water into hydrogen and oxygen. But, biological methods for producing hydrogen has emerged strongly over the past decades. In particular, specific microorganisms could use different substrates to produce hydrogen at differing yields. Such fundamental discoveries with industrial applications thus motivated the use of metabolic engineering approaches and methodologies in enhancing biological hydrogen production through a series of enzyme over-expression, pathway debottlenecking, and gene deletion. However, such approaches heavily rely on the selection of an appropriate microbial chassis for biohydrogen production. With the proper strain in hand, use of alternative substrates may engender greater hydrogen productivities. But learning from the bioprocessing field, co-culture of two compatible microorganisms have been sought after for improving biohydrogen production. In addition, thermophilic microbes may also be useful candidates for exploiting hydrogen production from composting. Future outlook in the field looks into filling our gaps in understanding of the metabolic network that feeds into hydrogen production in different organisms. But, more importantly, problems such as reduced growth rate in engineered microbes point to fundamental issues with using genetically engineered microorganisms for improved biohydrogen production, to which clever bioprocess engineering may yield solutions.

Urban areas face daunting economic challenges that have increased in scope in recent years. At the same time, cities provide for opportunities for growth and value creation. The interplay of these challenges and opportunities represents the area of intervention for policymakers and researchers. However, the traditional approach to urban policy, deriving from the managerial and economic policy theories, shows difficulties mainly related to the capacity to counterbalance the interests and expectations of a multitude of stakeholders participating to the value co-creation process and to bring all different components to synergically contribute to the sustainability of the system. The Author proposes an innovative approach to urban public policy, by adopting the theoretical corpus of the Viable Systems Approach ("VSA"). Urban planning will be particularly analysed, as systemic components of urban areas, with the aim to investigate the decision-making processes for an integrated, efficient, effective and sustainable management of the territory as a multidimensional, multisectoral and multi-stakeholder entity. By recovering different settings, the VSA intends the co-creation of value as the capacity of the viable systems to increase its surviving chances in its own context. The value derives, first of all, from the strategic decisions aimed at finding both dyadic and context consonance. Through its strategic decisions, the Governing Body of the territory develops a specific system as the overall synthesis of all possible systems organised within a specific area, identifying pattern of development agreed by the several stakeholders of the territory. In the dynamics of value co-creation in systemic multi-subjective organizations, where the level of complexity is particularly significant, the research for consonance among different stakeholders is particular important in order to achieve the most value for the territory. In this respect, the VSA may constitute a valid tool, helping to find the necessary capacities to imagine evolutionary paths towards new competencies.

With the progress of immunotherapy in cancer, oncolytic viruses (OVs) are getting more and more attention during the past decade. Due to their cancer-selective and immunogenic property, OVs are considered ideal candidates to be combined with immunotherapy to increase both specificity and efficacy in cancer treatment. OVs preferentially replicate in and lyse cancer cells, generating pathogen-associated molecular patterns (PAMPs) and danger (damage)-associated molecular patterns (DAMPs). These signals trigger innate immune response to modulate the solid tumor microenvironment, resulting in in situ autovaccination leading to adaptive anti-virus and anti-tumor immunity. Here, we summarize the conceptual updates of oncolytic virotherapy, immunotherapy, and the strategies to enhance the virus-mediated anti-tumor immune response, including: 1. Arm OVs with cytokines to modulated innate and adaptive immunity; 2. Combine OVs with immune checkpoint inhibitors to release T cell inhibition; 3. Combine OVs with immune co-stimulators to enhance T cell activation.

Biocompatible and biodegradable poly(butylene succinate-co-adipate) (PBSA)/hexadecylamine-modified PPZn (m-PPZn) nanocomposites were prepared using a melt mixing process. Experimental results of wide-angle X-ray diffraction and transmission electron microscopy revealed that the stacking layers of the m-PPZn were partially intercalated and partially exfoliated into the PBSA polymer matrix. The isothermal crystallization kinetics of PBSA/m-PPZn nanocomposites were studied at the temperature range of 62−70 °C and the half-time for crystallization of 3 wt % PBSA/m-PPZn nanocomposite was reduced by 27−35% compared with that of pure PBSA. This finding suggests that the incorporation of m-PPZn might cause the heterogeneous nucleation and the subsequent crystallization growth, which enhances the isothermal crystallization rate of PBSA/m-PPZn nanocomposite. The biodegradation rates of PBSA using Lipase from Pseudomonas sp. increase as the contents of m-PPZn increase. The degradation behavior of the neat PBSA investigated using the change of weight-average molecular weight belongs to exo-type hydrolysis activity. It is necessary to point out that the change of degree of crystallinity and degradation rate are almost linearly proportional to the loading of hexadecylamine-modified PPZn. This finding would provide an important information for the manufacturing biodegradable PBSA nanocomposites.

In the next decade, further digitalisation of the entire wind energy project lifecycle is expected to be a major driver for reducing project costs and risks. In this paper, a literature review on the challenges related to implementation of digitalisation in the wind energy industry is first carried out, showing that there is a strong need for new solutions that enable co-innovation within and between organisations. Therefore, a new collaboration method called the WeDoWind Ecosystem is developed and demonstrated. The method is centred around specific "challenges", which are defined by "challenge providers" within a topical "space" and made available to participants via a digital platform. The data required in order to solve a particular "challenge" is provided by the "challenge providers" under the confidentiality conditions they specify. The method is demonstrated via a case study, the EDP Wind Turbine Fault Detection Challenge. Six submitted solutions using diverse approaches are evaluated. Two of the methods perform significantly better than EDP’s existing method in terms of Total Prediction Costs (saving up to €120,000). The WeDoWind Ecosystem is found to be a promising solution for enabling co-innovation in wind energy, providing a number of tangible benefits for both challenge and solution providers.

Proper species identification from ancient DNA samples is a difficult task that sheds light on the evolutionary history of pathogenic microorganisms. The field of palaeomicrobiology has undoubtedly benefited from the advent of untargeted metagenomic approaches that use next-generation sequencing methodologies. Nevertheless, assigning ancient DNA at the species level is a challenging process. Recently, the gut microbiome analysis of three pre-Columbian Andean mummies [1](Santiago-Rodriguez et al. 2016) has called into question the identification of Leishmania in South America. Here, the metagenomic data filed in MG-RAST (Metagenomics RAST server) were used for a further attempt to identify members of the Trypanosomatidae family infecting these ancient remains. For this purpose, we used two metagenomic analysis tools. In the first step, data were analysed using the ultrafast metagenomic sequence classifier, based on exact alignment of k-mers (Kraken). In the second step, we used Bowtie2, an ultrafast and memory-efficient tool for aligning sequencing reads to long reference sequences. We then compared the output results. These approaches highlight some interesting findings on potential infections by human pathogenic trypanosomatids in these three pre-Columbian mummies.

Polymer-based piezoelectric biomaterials have already proven their relevance for tissue engineering applications. Further, the morphology of the scaffolds plays also an important role in cell proliferation and differentiation. The present work reports on poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV), a biocompatible, biodegradable and piezoelectric biopolymer that has been processed in different morphologies, including films, fibres, microspheres and 3D scaffolds. Further, the corresponding magnetically active PHBV-based composites were also produced. The effect of the morphology on physico-chemical, thermal, magnetic and mechanical properties of pristine and composites samples was evaluated, as well as their cytotoxicity. It was observed that the morphology does not strongly affect the properties of the pristine samples but the introduction of cobalt ferrites induces changes in the degree of crystallinity that could affect the applicability of prepared biomaterials. Young modulus is dependent of the morphology and also increases with the addition of cobalt ferrites. Both, pristine and PHBV/cobalt ferrite composite samples are no cytotoxic, indicating their suitability for tissue engineering applications.

There are two contrary opinions regarding the risk if mainland China (MC) moves away from its zero-COVID policy. Some experts think the risk shall be much lower than influenza as per MC’s own COVID-19 case fatality rate (CFR), while some other experts think the risk shall be much higher than influenza as per the COVID-19 CFRs of other regions. We elucidate here that this and multiple other striking differences in the CFR between various scenarios all support and substantially resulted from the view that good IDM is highly powerful to mitigate COVID-19, where IDM (isolation-disinfection-maintenance) means isolation of COVID-19 cases from other people, disinfection of their living environments, and health maintenance (e.g., rest, nutrition, breathing). The high effect of good IDM is also supported by the theoretic functions of IDM in minimizing co-infections and maintaining body functions, and the fact that all the 505 COVID-19 deaths reported in MC in 2022 before May 5 died directly of severe underlying diseases with COVID-19. Although it is tough for people in poverty to obtain good IDM, good IDM can be feasible at home for the most mild cases and in hospitals for the most severe cases. Therefore, good IDM can be crucial to mitigating COVID-19 worldwide. It also suggests that the risk for China to end its zero-COVID policy depends on China’s control policies or measures. Based on the effect of IDM, the cautious co-existence policy was proposed for COVID-19 control. This policy could reduce the whole death toll in MC because good IDM is non-specific and can reduce deaths of various other diseases. The cautious co-existence policy (non-specific) and the vaccination policy (specific) aid each other to mitigate COVID-19, and they cannot replace each other. Those who are qualified in health for vaccination should be vaccinated against COVID-19 timely.

Logistics Engineering has transcended over the decades into an approach for competitive benefits in organisational performance and logistics efficiency. Most industries are recognising that significant savings are available to companies that are able to ordinate and improve within their logistics operations. Companies today face great challenges because the successful supply of many products and services needs to the effective integration of logistics activities across a prolongation supply chain and an increasing geographical separation. Moreover, logistics integration approach involves both internal integration for an ordinated, unified process as well as relationships to react flexibly, changeability, and responsibility to customer's demands. In this study, by using of Fuzzy Vikor (F-Vikor), the best combination of RIR was selected and RIR Locating was done. The main aim of this paper is survey and design of the integrated operational logistics network (IOLN) and also, a proposed IOLN to integration of the Iran Khodro Co Supply Network.

The morbidity and mortality caused by invasive fungal infections is increasing across the globe due to developments in transplant surgery, the use of immunosuppressive agents, and the emergence of drug-resistant fungal strains, which has led to a challenge in terms of treatment due to the limitations of three classes of drugs. Hence, it is imperative to establish effective strategies to identify and design new antifungal drugs. Drug repurposing is an effective way of expanding the application of existing drugs. In the last years, various existing drugs have been shown to be useful in the prevention and treatment of the invasive fungi. In this review, we summarize the currently used antifungal agents. In addition, the most up to date information on the effectiveness of existing drugs with antifungal activity is discussed. Moreover, the antifungal mechanisms of existing drugs are highlighted. These data will provide valuable knowledge to stimulate further investigation and clinical application in this field.

Comments are exploited by product vendors to measure satisfaction of consumers. With the advent of Natural Language Processing (NLP), comments on Google Play can be processed to extract knowledge on applications such as their reputation. Proposals in that direction are either informal or interested merely on functionality. Unlike, this work aims to determine reputation of Android applications in terms of confidentiality, integrity, availability and authentication (CIAA). This work proposes a model of assessing app reputation relying on sentiment analysis and text analysis of comments. While assuming that comments are reliable, we collect Google Play applications subject to comments which include security keywords. An in-depth analysis of keywords based on Naive Bayes classification is made to provide polarity of any comment. Based on comment polarity, reputation is evaluated for the whole application. Experiments made on real applications including dozens to billions of comments, reveal that developers lack to make efforts to guarantee CIAA services. A fine-grained analysis shows that not security reputed applications can be reputed in specific CIAA services. Results also show that applications with negative security polarities display in general positive functional polarities. This result suggests that security checking should include careful comment analysis to improve security of applications.

This paper presents a new methodology that provides the analysis of surface texture changes in areas adjacent to the volcano and its impact product of volcanic activity. To do this, algorithms from digital image processing such as the co-occurrence matrix and the wavelet transform are used. These methods are working on images taken by the Landsat satellite platform sensor 5 TM and Landsat 7 ETM + sensor, and implemented with the purpose of evaluating superficial changes that can warn of surface movements of the volcano. The results were evaluated by similarity metrics for grayscale images, and validated in two different scenarios that have the same type of eruption, but differ, essentially, in climate and vegetation. Finally, the proposed algorithm is presented, setting the parameters and constraints for implementation and use.

The continued application of organochlorine pesticides (OCPs) in indoor residual spraying has posed significant threat to human health in Northern part of South Africa, despite its ban. In this study, we investigated the occurrence and spatial distribution of DDTs and its metabolites in surface soil (30 samples) collected in and around the spray homesteads; demarcated into three concentric zones A, B, C in Tshilamusi Vhembe district, South Africa. DDTs were the most abundant of all the OCPs chemicals found in soil samples. The concentrations of DDT range from 12.19 to 65.69 µg/kg, with the highest occurring at zone A which is the zone of application. DDTs and all its metabolites considered in this study were found in appreciable concentrations in soil of Zones B and C, far from spray sites. The results showed a strong correlation between distance and concentration levels of DDTs and its metabolites. However, there is a need for proper monitoring of OCPs chemicals in other environmental matrices as well as relevant agencies enforcing strict adherence to regulations on consumption of OCPs.

Contemporary literature dealing with the governance and exploitation of common-pool natural resources was initiated by Elinor Ostrom in 1990, and has been growing fast ever since. On the contrary, within the same research stream, the study of the presence and economic role of common resources in entrepreneurial organizations is, to date, under-researched. This work endeavors to fill some gaps in this research perspective by: (i) spelling out a new-institutionalist framework for the analysis of the accumulation and governance of common capital resources within organizational boundaries; (ii) considering co-operative enterprises as the organizational form that, on the basis of historical record, and of behavioral and institutional characteristics, demonstrated to be most compatible with a substantial role for common and non-divided asset-ownership and with its governance thereof; (iii) evidencing and explaining the strong connection between cooperative longevity and the presence of non-divided asset ownership. The economic forces influencing the optimal level of self-financed common capital resources in co-operatives are enquired. Conclusions to the paper evidence the main reasons why the new approach can better explain than preceding ones the economic sustainability and longevity of cooperative enterprises.

Financial statement analysis is an analysis that uses analytical procedures to evaluate a company's financial health, risks, performance, and future growth potential. This article aims to find out the application of analysis of financial statements of PT. Astra Internasional, Tbk towards the decision-making of novice investors in the Indonesian capital market. This article is qualitative descriptive with literature studies. The results of this article can be concluded that the analysis of the financial statements of PT. Astra Internasional, Tbk can help novice investors in the Indonesian capital market in making investment decisions.