This publication investigates the potential application of bark extractives as a biopolyol and extracted bark residues as a filler for producing polyurethane materials. The aim is to enhance the properties of polymeric composites while reducing the environmental impact associated with the complex utilization of bark.The comprehensive study of compositions of extractives isolated from black alder (Alnus glutinosa) and Baltic pine (Pinus silvestris) barks was performed using microwave-assisted water extraction. The yield of the extracts obtained under different extraction conditions, as well as the total phenolic and monomeric carbohydrate content in the extractives, were studied. Furthermore, UHPLC-HRMS analysis was conducted to study the detailed composition of the bark extracts.The total content of hydroxyl groups and the relative portion of aliphatic and phenolic groups in the isolated extracts were determined depending on the extraction regimes and bark origination. The dominant compounds in black alder bark extracts isolated at 70-90⁰C were identified as diarylheptanoids and their derivatives bearing sugar units, with oregonin being the main compound. Pine bark extracts isolated at the same temperature were found to be rich in oligomeric proanthocyanidins. Extracts from both black alder and pine barks obtained at different times of isothermal heating between 130-150°C were rich in carbohydrates and showed an increased proportion of aliphatic OH groups.The study also focused on the composition of residual biomass. It was indicated by Py-GC/MS/FID and wet chemistry methods that residues of both black alder and pine bark are enriched with lignin in comparison with initial barks. Therefore, it can be proposed that extracted bark residues introduced into polyurethane compositions will act as a charcoal formation promoter, thus increasing the flame resistance of materials.Overall, the study provides valuable insights into the chemical composition of bark extractives and extracted bark residues for their potential application as biopolyol and fillers of polyurethane materials, contributing to a more sustainable approach in polymer composite production.

Firebrands are an important agent of wildfire spread and structure fire ignitions at the wildland urban interface. Bark flake morphology has been highlighted as an important, yet poorly characterized factor in firebrand generation, transport, deposition, and ignition of unburned material. Using pine species where bark flakes are the documented source of embers, we conducted experiments to investigate how bark structure changes in response to diurnal drying. Over a 3-day period in a longleaf pine (Pinus palustris Mill.) stand in Florida, we recorded changes in temperature, moisture content and structure of bark across different facing aspects of mature pine trees to examine the effects of varying solar exposure on bark moisture. We further compared results to bark drying in a pitch pine (Pinus rigida Mill.) plantation in New Jersey. Under all conditions, bark peeled and lifted away from the tree trunk over the study periods. Tree bole aspect and the time of day interacted to significantly affect bark peeling. General temperature increases and moisture content decreases were significantly different between east and west aspects in pitch pine, and with time of day and aspect in longleaf pine. These results illustrate that bark moisture and flakiness is highly dynamic on short time scales, driven largely by solar exposure. These diurnal changes likely influence the probability of firebrand production during fire events via controls on moisture (ignition) and peeling (lofting).

The purpose of the present study was to examine if 14 days of supplementation with a pine bark extract leading up to and following an exercise test would increase performance and reduce biomarkers associated with muscle damage, inflammation and oxidative stress. The study used a double-blind, placebo controlled, cross-over design. Participants ingested either 800mg pine bark extract or placebo for 14 days prior to the first exercise trial and for 2 days post-exercise. On the exercise day, participants submitted a pre-exercise blood sample, then completed a VO₂ peak test until volitional failure. A post-blood sample was collected 1 hour after completion of exercise. Participants returned at 24 & 48 hours after the exercise testing for measures of muscle pain in the lower body using an algometer. Participants then had a 7-day washout period before beginning to crossing over to the alternate treatment. Analysis via ordinal regression demonstrated a significant difference in oxidative stress in the pine bark extract group compared to placebo (ChiSq = 2.63; p = 0.05). The pine bark extract was effective at affording protection from oxidative stress post exercise. Further work should be undertaken to evaluate the findings with other exercise modes or in participants with known metabolic syndrome.

The purpose of this work is to investigate the protein kinase inhibitory activity of constituents from ethyl acetate soluble fraction of Acacia auriculiformis stem bark. Column chromatography, gel filtration and NMR spectroscopy were used to purified and characterized betulin from the extract. Betulin which is a known inducer of apoptosis was screened against a panel of 16 disease-related protein kinases. Betulin was shown to inhibit Abelson murine leukemia viral oncogene homolog 1 (ABL1) kinase, casein kinase 1epsilon (CK1epsilon), glycogen synthase kinase 3alpha/β (GSK-3alpha/β), Janus kinase 3 (JAK3), NIMA Related Kinase 6 (NEK6) and vascular endothelial growth factor receptor 2 kinase (VEGFR2) and with activity in µM range. The effect of betulin on the cell viability of doxorubicin-resistant K562R chronic myelogenous leukemia cells was then verified to underline its putative use as anti-cancer compound. Betulin was shown to modulate the mitogen-activated protein (MAP) kinase pathway similarly to imatinib mesylate, a well-known inhibitor of ABL1 kinase. The interaction of betulin and ABL1 was studied by molecular docking showing an interaction of the inhibitor with the ATP binding pocket. Altogether, these data demonstrate that betulin is a multi-target inhibitor of protein kinases, an activity that can contribute to the anticancer properties of the natural compound and notably for treatment of leukemia.

Bark stripping by the Bennett’s wallaby (Macropus rufogriseus rufogriseus) from the lower stems of 3–6-year-old radiata pine (Pinus radiata) causes significant damage in Tasmanian plantations. The usual diet of this generalist herbivore is mainly grasses and broadleaved forbs. As the factors that attract wallabies to supplement its diet by eating the bark of plantation pine trees are currently not elucidated, the present study aimed to determine how the incidence and severity of bark damage in 12 Tasmanian radiata pine plantations was influenced by various inter-site factors such as the floristic composition of the surrounding forest and by various intra-site factors such as the height and circumference of individual trees, the number of branches in the first two whorls at the base of the tree, and their internode lengths. Site differences in the observed percentage of bark stripping were found to be related to ‘ease of access’ variables such as bare ground, bracken, and moss, ‘hindrance to access’ variables such as rock and woody debris, and the percentage of grass, the wallaby’s main food source, present in the five plots at each site. The difference between the mean minimum soil and air temperatures in spring, a driving force for carbohydrate production that occurs with tree growth in spring or early summer, was the only meteorological observation at the sites that was found to be statistically significant. Nevertheless, there was no direct evidence that it was the movement of sugars in the phloem tissue accompanying tree growth which provided wallabies with a supplementary food source.

The production of polyurethane films from bark-derived polyols requires the complete solubility of all components in the polyurethane synthesis media. In this study, a comprehensive investigation was conducted to achieve the copolymerization of black alder bark water extract-derived polyol with isocyanate for polyurethane film synthesis in THF solution. A fractionation approach using tetrahydrofuran (THF) as a solvent was employed to dissolve the extract, followed by filtration and removal of the solvent. The resulting THF-soluble fraction comprised 62±1% of the dry weight of the alder bark extract, mainly consisting of the xyloside form of the diarylheptanoid compound oregonin, along with oligomeric flavonoids and carbohydrates. The THF-insoluble fraction was the most enriched with carbohydrate compounds, followed by the crude extract and THF-soluble fraction. Another approach was aimed at obtaining bark extractives based liquid polyols suitable for producing rigid PU foams. For this purpose, oven-dried crude black alder bark water extract was liquefied with polyethylene glycol (PEG 400). The liquefaction of black alder bark and pine bark extractives was studied under different conditions, including varying temperature ranges (130-170⁰C), catalyst concentrations (0-1,5%), and bark extract content in the mixture (15-30%). The results showed that the use of sulphuric acid as a catalyst (1-1.5%) significantly improved the solubility of both extractives, enabling the attainment of extract concentrations up to 25% at 170⁰C. However, increasing the extract content beyond a certain threshold led to incomplete solubility. It was shown that the PEG-insoluble fractions consist mainly of carbohydrate components. To increase the content of biomass in liquid polyols, the effect of glycerol additions into the liquefaction agent is under study. The findings provide insights into tailoring bark-sourced polyols for polyurethane foam production through appropriate liquefaction conditions.

Over the last decade, there has been a growing interest in the use of a wide range of phytoadditives to counteract the harmful effects of heat stress in poultry. Willow (Salix spp.) is a tree with a long history. Among various forms, willow bark is an important natural source of salicin, β-O-glucoside of saligenin, but also of polyphenols (flavonoids and condensed tannins) with antioxidant, antimicrobial and anti-inflammatory activity. In light of this, the current review presents some literature data aiming to: (1) describe the relationship between heat stress and oxidative stress in broilers, (2) present or summarize literature data on the chemical composition of Salix species, (3) summarize the mechanisms of action of willow bark in heat-stressed broilers, (4) present different biological effects of the extract of Salix species in different experimental models.

Finishing coatings used in the wood-based composites industry play a key role in the final appearance of the finished product. However, the use of such coatings is not only for aesthetic purposes but also to protect the product against surface damage and moisture or minimize the emission of harmful substances. The latter is an extremely important factor in terms of safety for both the manufacturer and the user, which is why the emissivity test is one of the most important tests in the case of finishing coatings. Such a role can be played by carbon-rich materials, such as those remaining from the extraction of birch bark. In this article, an attempt was made to create coatings in the form of a film by combining a biopolymer with suberinic acid residues (SAR). There were two types of biopolymers used – polylactide (PLA) and polycaprolactone (PCL), in various polymer-SAR ratios. SAR as a residue, is a material that bounds CO2 from the atmosphere and creates a possibility of further use. As part of this study, the obtained coatings were tested in terms of resistance to scratch, relative hardness, cold liquids, total volatile organic compounds (TVOC) and formaldehyde emission, surface absorption etc. Differences in the polymers used and the effect of the SAR additive on selected surface properties were demonstrated. The addition of carbon-rich SAR significantly improves the gas barrier properties of the surface finishing materials based on PLA and PCL. The relative hardness and scratch resistance has also increased with raising SAR content. However, the increasing content of SAR filler act as a limiter in the depth of penetration of deposited surface finishing materials onto the wood surface.

Purpose: Oxidative stress is responsible for over seventy five diseases and other harmful cytological challenges including cancer, type 2 diabetes mellitus, lipid peroxidation, distortion of cell membrane integrity, shortening of telomerase among others. Antioxidant potency of any plant is a very positive remedy to the debilitating effects of prooxidants and oxidants. The study was aimed at investigating the antioxidant potency of methanol extract of Pentaclethra macrophylla stem bark- in vitro and in vivo. Methods: Different phytochemicals were determined using standard methods. Nitric oxide, 1, 1-diphenyl-2- picrylhydrazyl (DPPH) radical scavenging activity, total antioxidant capacity and ferric reducing/anti-radical power were used to investigate the in vitro antioxidant activity. Catalase assay, superoxide dismutase, malondialdehyde and glutathione peroxidase were used to determine the in vivo antioxidant efficacy using six groups of five rats. Results: The result showed various quantities of phytochemicals, including antioxidant phytochemicals-flavonoids, tannins and total phenolics. The in vitro assay showed that 250 μg/ml of extract had the highest percentage inhibition of DPPH radical (93.93%). The 125 μg/ml had the highest scavenging activity of nitric oxide radical (49.47%) while 250μg/ml showed the least with 41.73%. Other methods showed various degrees of activity. The in vivo antioxidant showed that the principal mechanism of antioxidant activity is by modulating the iron-dependent catalase activity. Conclusion: Pentaclethra macrophylla has both in vitro and in vivo antioxidant activities and therefore is useful in ameliorating the debilitating effects of oxidants.

The foraging behavior of ruminating ungulates significantly impacts forest ecosystems due to their nutritional requirements. This study focuses on inter-specific comparisons of bark browsing (stripping) between Douglas fir (Pseudotsuga menziesii (Mirb.) Franco) and silver fir (Abies alba Mill.). Field measurements were conducted at the previously established research-demonstration site "Husárik" in the Javorníky Mountains, north-western Slovakia. We didn’t only measure the sizes of wounds on stems but also assessed the dimensions of unrecovered parts of wounds, subsequently calculating areas of recovered bark patches. Then, the total areas of wounds, recovered patches, and unrecovered parts were determined. Additionally, the percentages of wound areas, recovered areas, and unrecovered areas were expressed as their proportions to the total bark surface. Influencing factors such as the position of wounds along the vertical stem profile and stem diameter class were analyzed using two- and three-way ANOVA followed by Fisher's LSD test. The results demonstrate the susceptibility of both tree species to bark browsing by ruminating ungulates, primarily red deer (Cervus elaphus L.) in our study site. Douglas fir exhibited slightly less intense browsing compared to silver fir, while silver fir had a slightly higher recovery rate. Specifically, 17.0% of the bark surface in Douglas fir and 21.5% in silver fir were browsed. The proportions of recovered areas on wounds were 62.5% and 69.6% in Douglas fir and silver fir, respectively. Regarding the vertical stem profile, the most intense browsing occurred at a height of 101-125 cm from the ground level, with rates of 40.7% in Douglas fir and 47.0% in silver fir. Browsing intensity showed negligible variation among diameter classes, which were classified as up to 35 mm, 35-50 mm, and over 50 mm. Our findings suggest that, as an introduced species, Douglas fir is not any suitable substitute for other commercially significant tree species in European countries where ruminating ungulates are overabundant.

Viroids are smallest pathogen that consist of non-capsidated, single-stranded non-coding RNA replicons and exploits host factors for their replication and propagation. The severe stunting disease caused by Citrus bark cracking viroid (CBCVd) is a serious threat, which spread rapidly within hop gardens. In this study, we employed comprehensive transcriptome analyses to dissect host-viroid interactions and identify gene expression changes associated with disease development in hop. Our analysis revealed that CBCVd-infection resulted in the massive modulation of activity of over 2000 genes. Expression of genes associated with plant immune responses (protein kinase and mitogen-activated protein kinase), hypersensitive responses, phytohormone signaling pathways, photosynthesis, pigment metabolism, protein metabolism, sugar metabolism and modification and others were altered, which could be attributed to systemic symptom development upon CBCVd-infection in hop. In addition, genes encoding RNA-dependent RNA polymerase, pathogenesis-related protein, chitinase as well as those related to basal defense responses were up-regulated. The expression levels of several genes identified from RNA sequencing analysis were confirmed by qRT-PCR. Our systematic comprehensive CBCVd-responsive transcriptome analysis provides a better understanding and insights into complex viroid-hop plant interaction. This information will assist further in the development of future measures for the prevention of CBCVd spread in hop fields.

In recent decades, large-scale forest disturbances such as windthrow and bark beetle infestations have significantly impacted the carbon balance of Earth and forest ecosystems, mainly by altering soil respiration (SR) in addition to decreased gross primary productivity. SR is considered the second highest flux on Earth, emitting 78-98 Gt C yr-1 to the atmosphere, thus contributing to global warming. Post-disturbance development is marked by changes in the size of SR. To investigate the impact of bark beetle (Ips typographus) infestations in mountain spruce forests on SR, we measured SR at infested sites by bark beetles and adjacent undisturbed stands in the High Tatra Mountains (Slovakia). The measurements were conducted during the vegetation period (May-September) in 2016 and 2017, five to six years after the initial attack by bark beetles, at an altitudinal gradient (1100-1400 m a.s.l.). SR varied throughout different months and altitudes, and we observed that SR at infested sites reached higher values (in most cases) than at uninfested stands. Average monthly and altitude SR rates during both vegetation periods showed higher values at infested sites, but not all of them were statistically significant. We observed an insignificant change in SR rate between 2016 and 2017 at both infested and uninfested sites. The highest rates of SR were observed in 2016 from July to August at both infested and undisturbed sites. On the other hand, in 2017 the highest SR rates were observed in June and July at undisturbed sites and from June to August at infested sites. However, yearly SR from May-September at infested sites showed significantly higher rates than uninfested ones in both years. SR showed a decreasing pattern with elevation gain in 2016 at infested sites. However, this pattern was not observed in 2017. Based on our observation and results we postulate that SR rates at infested sites are boosted by needle fall and debris from dead and dying trees, which increases heterotrophic SR and compensates the decrease of autotrophic SR from tree roots. This study provides important insights into the impact of bark beetle infestations on SR and highlights the need for further research on the long-term effects of forest disturbances on carbon cycling.

The black timber bark beetle Xylosandrus germanus (Blandford) is an invasive ambrosia beetle originating from Southeastern Asia that has become successfully established within Europe and North America. Herein, we provide a review of the spread and distribution of this pest of trees and timber across Europe before and after 2000, along with a review of its habitat preferences. Since the spread of X. germanus across Europe has accelerated rapidly post-2000, emphasis is placed on this period. X. germanus was first recorded in Germany in 1951 and since then in 21 European countries along with Russia. Ethanol-baited traps were deployed in oak, beech, and spruce forest ecosystems in the Western Carpathians, Central Europe, Slovakia, to characterize the distribution and habitat preference of this non-native ambrosia beetle. Captures of X. germanus within Slovakia have been rising rapidly since its first record in 2010, and now this species dominates captures of native ambrosia beetles. X. germanus has spread throughout the whole Slovakia from the south-southwest to the north-northeast over the period of 5–10 years and has also spread vertically into higher altitudes within this country. While living but weakened trees in Europe and North America are attacked by X. germanus, the greatest negative impact within Slovakia is attacks on recently felled logs of oak, beech and spruce trees providing high quality timber/lumber. We suggest that the recent rapid spread of X. germanus in Central Europe is being facilitated by environmental changes, specifically global warming, and the increasing frequency of timber trade. Recommendations for management of X. germanus in forest ecosystems are proposed and discussed, including early detection, monitoring, sanitary measures, etc.

Forest damage has become more frequent in Europe in the last decades, and remote sensing offers a powerful tool for monitoring them rapidly and cost-effectively. A novel approach was developed to utilize high-resolution ESA Sentinel-2 satellite imagery and Google Earth Engine cloud computing. The processing, analysing, and visualization of vegetation and water index (NDVI, NDVIch, Z NDVI, EVI, NDWI) maps and charts derived from satellite images took place in the cloud to ensure the detection of forest disturbances in the Hungarian study site for the period 2017-2020. The index maps were classified to reveal forest disturbances, and the cloud-based method successfully showed drought and frost damage in the oak-dominated Nagyerdő forest of Debrecen. Differences in the reaction to damage between tree species were visible in the index values, therefore a Random Forest Machine Learning classifier was applied to show the spatial distribution of dominant species. Accuracy assessment was accomplished with confusion matrices that compared classified index maps to field-surveyed data, demonstrating 71% Total Accuracy for forest damage and 76% for tree species. Based on the results of this study and the resilience of Google Earth Engine, the presented method has the potential to be extended to monitor the entire Hungary.

Purpose: Inflammation of various degrees is common among humans. There are associated side effects with orthodox delivery systems and anti-inflammatory agents hence the study investigated the characteristics of herbal lipospheres and the anti-inflammatory potency of the lipospheres formulated from Pentaclethra macrophylla with the view to having a drug with a better delivery system and lesser side effects.Methods: Herbal lipospheres were formulated using solidified reverse micellar solutions (SRMS) of P90H and goat fat and characterized for particle size and morphology, pH – time dependent analysis, encapsulation efficiency (EE%) and Fourier Transform infrared spectroscopy. The in vitro antinociceptive and anti-inflammatory study were carried out using membrane stabilization by hypotonicity induced haemolysis and determination of anti-platelet aggregatory activity models. The in-vivo anti-nociceptive and anti-inflammatory studies on egg albumin and formaldehyde induced arthritis models were done. Total white blood cell count and differential blood count were carried out on the rats. Results: The results showed that there was no change in pH for the PM unloaded lipospheres and 2.5g of PM-loaded lipospheres from Day 1 to Day 7, but mild variation in the rest of the formulations. The EE ranged from 35.2% to 94% increasing according to the drug concentration. The photomicrographs of the lipospheres showed that the particles were spherical in shape. The particle sizes were within the acceptable range for lipospheres. FTIR showed no interaction. In the arthritis study, PM-loaded lipospheres inhibited edema consistently throughout the duration of observation. Inhibition of membrane increased steadily with an increase in concentration of PM in the lipospheres and the standard drug. The platelet aggregatory inhibition decreased steadily with an increase in concentration of the PM in the lipospheres as well as the standard. The T50 dose of PM had the highest percentage of WBC and it decreased as the treatment doses increased from T100 to T200. There was no significant differences among the Neutrophil counts of the different groups.Conclusion: The study, therefore, showed that the methanol extract of Pentaclethra macrophylla formed efficient herbal lipospheres with antinociceptive and anti-inflammatory activities.

Berberis vulgaris (L.) has remarkable ethnopharmacological properties and is widely used in traditional medicine. The present study investigates B. vulgaris stem bark (Berberidis cortex) by extraction with 50% ethanol. The main secondary metabolites were quantified, resulting in a polyphenols content of 17.6780 ± 3.9320 mg Eq Tannic acid / 100 g extract, phenolic acids amount of 3.3886 ± 0.3481 mg Eq Chlorogenic acid / 100 g extract and 78.95 µg/g berberine. The dried hydro-ethanolic extract (BVE) was thoroughly analyzed using Ultra-High Performance Liquid Chromatography coupled with High-Resolution Mass Spectrometry (UHPLC–HRMS/MS) and HPLC and 40 bioactive phenolic constituents were identified. Then, the antioxidant potential of BVE was evaluated using three methods; our results could explain the protective effects of Berberidis cortex EC50FRAP = 0.1398 mg/mL, IC50ABTS = 0.0442 mg/mL, IC50DPPH = 0.2610 mg/mL compared to ascorbic acid (IC50 = 0.0165 mg/mL). Next, the acute toxicity and teratogenicity of BVE and Berberine - Berberine sulfate hydrate (BS) - investigated on Daphnia sp reported significant BS toxicity after 24 h; BVE revealed considerable toxicity after 48 hours and induced embryonic developmental delays. Finally, the anticancer effects of BVE and BS were evaluated on different tumor cell lines after 24 and 48 hours of treatments. The MTS assay evidenced a dose- and time-dependent antiproliferative activity, higher on BS than BVE. The strongest diminution of tumor cell viability was recorded on breast (MDA-MB-231), colon (LoVo) cancer, and OSCC (PE/CA-PJ49) cell lines after 48 h of exposure (IC50 < 100 µg/mL). However, no cytotoxicity was reported on normal epithelial cells (HUVEC) and hepatocellular carcinoma (HT-29) cell lines. Extensive data analysis supports our results, showing a significant correlation between the BVE's concentration, phenolic compounds content, antioxidant activity, exposure time, and the viability rate of various normal cells and cancer cell lines.

For the first time, few-layer graphene (FLG) nanosheets were synthesized by the method of self-propagating high-temperature synthesis (SHS) from biopolymers (starch and lignin). We suggested that biopolymers (lignin, tree bark) and polysaccharides, in particular starch, could be an acceptable source of native cycles for the SHS process. The carbonization of biopolymers under the conditions of the SHS process was chosen as the basic method of synthesis. Chemical reactions, under the conditions of the SHS process, proceed according to a specific mechanism of nonsothermal branched-chain processes, which are characterized by the joint action of two fundamentally different process-accelerating factors - avalanche reproduction of active intermediate particles and self-heating. The method of obtaining FLG nanosheets included the thermal destruction of hydrocarbons in a mixture with an oxidizing agent. We used biopolymers as hydrocarbons and ammonium nitrate as an oxidizing agent. Thermal destruction was carried out in the mode of SHS, heating the mixture in a vessel at a speed of 20–30 oC/min to 150-200 oC and keeping at this temperature for 15–20 min with the discharge of excess gases into atmosphere. A combination of spectrometric research methods, supplemented by electron microscopy data, has shown that the particles of the carbonated product powder in their morphometric and physical parameters correspond to FLG nanosheets. An X-ray diffraction analysis of the indicated FLG nanosheets was carried out, which showed the absence of formations with a graphite crystal structure in the final material. The surface morphology was also studied and the features of the IR absorption of FLG nanosheets were analyzed. It is shown that the developed SHS method makes it possible to obtain FLG nanosheets with linear dimensions of tens of microns and a thickness of not more than 1-5 graphene layers (several graphene layers).

Tree-killing bark beetles are the most economically important insects in conifer forests worldwide. Yet despite >200 years of research, the drivers of population eruptions or crashes are still not fully understood, precluding reliable predictions of the effects of global change on beetle population dynamics and impacts on ecosystems and humans. We critically analyze potential biotic and abiotic drivers of population dynamics of the European spruce bark beetle (Ips typographus) and present a novel ecological framework that integrates the multiple drivers governing this bark beetle system. We call for large-scale collaborative research efforts to improve our understanding of the population dynamics of this important pest; an approach that might serve as a blueprint for other eruptive forest insects.

Crapemyrtle (Lagerstroemia indica L.: Lythraceae) is the most popular summer flowering tree in the U.S. Its total value sold has almost doubled since 1998. Consumers prize crapemyrtles for their beauty and pest resistance. However, current crapemyrtle production and use is being threatened by crapemyrtle bark scale (Acanthococcus lagerstroemiae (Kuwana, 1907)) (CMBS), which has been confirmed in 12 U.S. states after its first sighting in Texas in 2004. Our survey results indicate that producers anticipate a significant decrease in the value of crapemyrtle due to CMBS, in the magnitude of 29.93% and 33.79%, in our 2018 and 2019 surveys respectively. Our findings indicate industry demand for CMBS control. We used a non-parametric test to compare the producers’ responses to several questions regarding CMBS-control, among the different producer categories included in our sample. Incorporated businesses showed the most support, followed by part-nerships, and family/individual operations were the least supportive of science-based CMBS control research. Large businesses predicted a more serious decrease in crapemyrtles’ value as compared to smaller businesses. More businesses with high volume of crapemyrtle-related business considered the benefits of CMBS-control to be higher than its cost, as compared to other businesses. We also used a relative importance index to illustrate the ranking of different attrib-utes of crapemyrtles that producers consider while making decisions about growing/purchasing the plants. Flower color was found to be the most important attribute, followed by disease re-sistance. If the issue of CMBS gets out of control, the industry might need to find potential re-placements to crapemyrtle. The most popular landscape plants that can potentially replace crapemyrtle, in the opinion of producers we surveyed, are vitex (Texas lilac) and magnolia.

Enormous quantities of softwood and hardwood tree bark are generated yearly in the pulp and woodworking industry. Chemical compounds which can be found in bark extracts have important biological properties and therefore a high potential for using in the production of special formulations. In the present study, extraction of Picea abies bark with organosolv solvents was investigated to achieve a high yield of desirable compounds. For the extraction four different solvent ratios of ethanol and water were applied. The temperature range of extraction was set between 40 and 100 °C and stirring velocity of 400 rpm. Extractions were performed with a solid/liquid ratio of 1:20. Yields of phenolics, flavonoids and tannins were determined using gallic acid for total phenolic content (TPC), quercetin for total flavonoid content (TFC) and tannic acid for total tannins content (TTC) as calibration compounds. Qualitative analysis of phenolic constituents was performed after their derivatization, by gas chromatography coupled with mass spectrometry identification. The total yield of bark extract of 14.75 wt.% was achieved by using an ethanol/water ratio of 50% (v/v) and a temperature of 100 °C. Gas chromatography results show 9 aromatic carboxylic acids as phenolic acids and quercetin and (+)-catechin as flavonoid compounds. Highest concentrations of TPC = 3.21 mg gallic acid equivalent/g, TCF = 0.62 mg quercetin equivalent/g and TTC = 0.84 tannic acid equivalent/g were determined at the same process conditions by photometric method. This study determined the conditions for organosolv extraction of useful compounds and suggests that some of extractives, e.g., taxifolin and rhamnetin presented in the spruce bark extracts, have antiviral (SARS-CoV-2) effects. Therefore, this warrants further evaluation of the antiviral properties of spruce bark constituents.