There are uncertainties associated with every phase of the stock assessment process, ranging from the collection of data, assessment model choice, model assumptions and interpretation of risk to the implementation of management advice. The dynamics of fish populations are complex, and our incomplete understanding of those dynamics (and limited observations of important mechanisms) necessitate that models are simpler than nature. The aim is for the model to capture enough of the dynamics to accurately estimate trends and abundance and to provide advice to managers about sustainable harvests. The \textit{status quo} approach to assessment modelling has been to identify the `best' model, based on diagnostics and model selection criteria, and to generate advice from that model, mostly ignoring advice from other model configurations regardless of how closely they performed relative to the chosen model. We review the suitability of the ensemble modelling paradigm to more fully capture uncertainty in stock assessment model building and the provision of advice. We recommend further research to evaluate potential gains in modelling performance and advice from the use of ensemble modelling, while also suggesting revisions to the formal process for reviewing models and providing advice to management bodies.

Artisanal and small-scale gold mining (ASGM) has been an important source of income for communities in the Madre de Dios River Basin in Peru for hundreds of years. However, in recent decades, the scale of ASGM activities in the region has increased dramatically, and exposures to a variety of occupational and environmental hazards related to ASGM, including mercury, are becoming more widespread. The aims of our study were to: (1) examine patterns in the total hair mercury level of human participants in several communities in the region and compare these results to the 2.2 µg/g total hair mercury level equivalent to the World Health Organization (WHO) Expert Committee of Food Additives (JECFA)’s Provisional Tolerable Weekly Intake (PTWI); and (2), to measure the mercury levels of paco (Piaractus brachypomus) fish raised in local aquaculture ponds, in order to compare these levels to the EPA Fish Tissue Residue Criterion of 0.3 µg Hg/g fish (wet weight). We collected hair samples from 80 participants in four communities (one control and three where ASGM activities occurred) in the region, and collected 111 samples from fish raised in 24 local aquaculture farms. We then analyzed the samples for total mercury. Total mercury levels in hair were statistically significantly higher in the mining communities than in the control community, and increased with increasing distance away from the Madre de Dios headwaters (as the crow flies), did not differ by sex, and frequently exceeded the reference level. Regression analyses indicated that higher hair mercury levels were associated with residence in ASGM communities. The analysis of paco fish samples found no samples that exceeded the EPA tissue residue criterion. Collectively, these results align with other recent studies showing that ASGM activities are associated with elevated human mercury exposure. The fish farmed through the relatively new process of aquaculture in ASGM areas appeared to have little potential to contribute to human mercury exposure. More research is needed on human health risks associated with ASGM to discern occupational, residential, and nutritional exposure, especially through tracking temporal changes in mercury levels as fish ponds age, and assessing levels in different farmed fish species. Additionally, research is needed to definitively determine that elevated mercury levels in humans and fish result from the elemental mercury from mining, rather than from a different source, such as the mercury released from soil erosion during deforestation events from mining or other activities.

This paper aims to develop a hierarchical risk assessment model using the newly-developed evidential reasoning (ER) rule, which constitutes a generic conjunctive probabilistic reasoning process. In this paper, we first provide a brief introduction to the basics of the ER rule and emphasize the strengths for representing and aggregating uncertain information from multiple experts and sources. Further, we discuss the key steps of developing the hierarchical risk assessment framework systematically, including (1) formulation of risk assessment hierarchy, (2) representation of both qualitative and quantitative information, (3) elicitation of attribute weights and information reliabilities, (4) aggregation of assessment information using the ER rule and (5) quantification and ranking of risks using utility-based transformation. The proposed hierarchical risk assessment framework can potentially be implemented to various complex and uncertain systems. A case study on the fire/explosion risk assessment of marine vessels demonstrates the applicability of the proposed risk assessment model.

Land use and cover change (LUCC) is an important method to investigate the causes of global environment change. We utilized the emergy ecological footprint (EEF) model to construct a land-use change model to be used as a systematic measuring tool for monitoring sustainable development trends. In particular, we estimated the eco-security of the Cing-jing region as a case study so that responsible agencies can use it to maintain a balance between ecological preservation and tourism development. The results indicated the following: First, the ecological environment of the Cing-jing region satisfied the safety standard in 2008–2014; however, the related indices increased considerably. Second, the grey model predicted a decrease in 2015–2024 ecological carrying capacities of Cing-jing and a large increase in capita EFs, resulting in a larger ecological deficit and higher EFI. The eco-security from 2015–2024 was higher compared to 7 years ago and is predicted to reach the Grade 2 intermediate level in 2022; thus the Cing-jing region is gradually becoming ecologically unsustainable. Strengths of our study included the use of EEF theory in a quantitative analysis of slope lands for the effective evaluation of ecological security. Finally, we expanded our research to include ecological security issues.

Safety management assessment systems for national level units’ in South Korea focus on responding capacity to cope with impending accident occurrence and danger occurrence. Since the four stage systems for prevention-preparation-response-recovery, which are core elements of national disaster management, assess the capacities by item such as those of individuals, disaster management departments, institutions, and management networks, there is no assessment function for the organic operation states of the entire systems. Therefore, for efficient disaster management, systematic evaluation indices that will enable active pre-checks in departments in organizations should be developed in place of the existing simply checking methods. In this study, an assessment model that will enable active disaster management centered on practice was developed using resilience engineering techniques. This model consists of disaster management items from the viewpoint of proactive responses instead of prevention. A total of 56 items that constitute four capacities; which are prediction (13 items), monitoring (14 items), proactive response (15 items), and safety learning (14 items) capacities were adopted in this model through Delphi analysis. Institutional capacities for infectious disease disaster management were evaluated based on this model and the resultant scores were prediction 4.41, monitoring 4.63, proactive response 4.69, safety learning 4.56 out of the full score of 5.0 points with an overall average of 4.51. This is an excellent capacity management score comparable to the score 4.57 of diagnosis of similar capacities by the WHO\_JEE (The Joint External Evaluation) in 2017. In fact, in 2015, when infectious disease capacity management was poor, in case of MERS (Middle East Respiratory Syndrome) infectious disease spread in South Korea, 36 patients died and 6,729 patients were isolated. However, through capacity reinforcement, in the case of MERS occurrence in South Korea in September 2018, a management capacity that prevented spread was shown as one confirmed case was completely cured in 10 days and 21 contacts were isolated and tested negative. Therefore, this capacity management assessment model is judged to be usable in enhancing disaster response and management capacities.

Background. The Stanford Health Assessment Questionnaire-Disability Index (HAQ) is widely used to measure functional ability in persons with Rheumatoid Arthritis (RA). The instrument was developed with limited involvement from persons with RA, and their perception of the instrument has not been studied in depth. The aim of this study was to explore how persons with RA experience the use of the HAQ in care. Methods. Forty persons with RA were purposefully recruited to participate in semi-structured interviews. The interviews were then analyzed qualitatively using thematic analysis. Results. The participants questioned the relevance of the HAQ but nevertheless experienced that the instrument had a profound effect on their understanding of health and how care is delivered. The analysis resulted in three themes: Problems with individual items, meaning of the summative score, and effects on care and health perceptions. Conclusions. To make the HAQ relevant to persons with RA, it needs to be revised or to include an option to select items most meaningful to the respondent. To ensure relevance, the HAQ update should preferably be co-created by researchers, clinicians and persons with RA.

The article focuses on mining of non-energy mineral resources with minimum environmental impacts. It issues from research results of a project Competence Centre for Effective and Ecological Mining of Mineral Resources implemented at the Faculty of Mining and Geology at VŠB-Technical University of Ostrava, Czech Geological Survey, a company Watrad ltd., a state enterprise Diamo, a company RPS Ostrava plc and a company Sedlecký kaolin plc. The paper starts with a partial analysis of the existing legal norms related to mining and processing of mineral resources. Next, it analyses mineral resource mining options free of negative environmental impacts. The fundamental tool to assess potential environmental impacts of mining is the implementation of Environmental Impact Assessment (EIA) process for a given mineral resource. In the Czech Republic environmental impact assessment is carried out by course of Act 100/2001 Coll. Its important amendment is Act 39/2015 Coll. claiming, inter alia, that the environmental impact assessment is rigidly connected with other permits and procedures, such as the zoning process and building construction permits. The article describes the environmental impacts of mining of non-energy mineral resources, including the following factors: appropriation of land, impacts on surface water, ground water and soil, noise, influence on the landscape character, and air pollution. The paper also includes a case study summarizing information on the environmental factors that may play a role in potential underground mining of graphite in the deposit Český Krumlov - Městský Vrch and the deposit Lazec - Křenov.

Most of the municipalities in the Gulf region are facing performance related issues in their municipal solid waste management (MSWM) systems. They lack to possess a deliberate inter-municipality benchmarking processes. Instead of identifying the performance gaps for their key components (e.g., personnel productivity, operational reliability, etc.) and adopt proactive measures, the municipalities primarily rely on an efficient emergency response. A novel hierarchical modeling framework, based on deductive reasoning, is developed for performance assessment of MSWM systems. Fuzzy rule based modeling using Simulink-MATLAB was used for performance inferencing at different levels, i.e., component, sub-components, etc. The model is capable of handling the inherent uncertainties due to limited data and imprecise knowledge base. The model’s outcomes can exclusively assist the managers working at different levels of organizational hierarchy for effective decision-making. Performance of the key component, assists the senior management to assess the overall compliance level of performance objectives. Subsequently, operation management can hone in the sub-components to acquire useful information for intra-municipality performance management. While, individual indicators are useful for inter-municipality benchmarking. The model has been implemented on two municipalities operating in Qassim Region, Saudi Arabia. The results demonstrate the model’s pragmatism for continuous performance improvement of MSWM systems in the country and elsewhere.

The use of haptic devices in rehabilitation of impaired limbs has become rather popular, given the proven effectiveness in promoting recovery. In a standard framework, such devices are used in rehabilitation centers, where patients interact with virtual tasks, presented on a screen. To track their sessions, kinematic/dynamic parameters or performance scores are recorded. However, as Internet access is now available at almost every home, and in order to reduce the hospitalization time of the patient, the idea of doing rehabilitation at home is gaining wide consent. Medical care programs can be synchronized with the home rehabilitation device; patient data can be sent to the central server that could redirect to the therapist laptop (tele-healthcare). The controversial issue is that the recorded data do not actually represent the clinical conditions of the patients according to the medical assessment scales, forcing them to frequently undergo clinical tests at the hospital. To respond to this demand, we propose the use of a bilateral master/slave haptic system that could allow the clinician, who interacts with the master, to assess remotely and in real time the clinical conditions of the patient that uses the home rehabilitation device as the slave. In this paper, we describe a proof of concept to highlight the main issues of such an application, limited to one degree of freedom, and to the measure of the stiffness and range of motion of the hand.

This paper formulates a new strategy for participatory forest management consisting of encouraging public participation as long as it increases empathy among participants. The strategy requires the homogeneous representation of the opinion of a participant (i.e. to determine how they assess a forest plan and identify the best one). Utility assessments are prepared for participants through pair-comparisons between meaningful points in the territory and from value functions based on forest indicators. The best plan is designed by applying combinatorial optimization algorithms to the utility of a participant. The calculating of empathy -of one participant relative to another - is based on the equivalence of their respective utilities when the current forest plan is modified. This involves calculating the opinions that are due to systematic changes in the collective plan for those participants that each participant supposes will affect the utility of the other participants. Calculating empathy also requires knowing the interactions among participants, which have been incorporated through agent-based simulation models. Application of the above methodology has confirmed the association between increases in empathy and convergence of opinions in different scenarios: well and medium-informed participants and with and without interaction among them, which verifies the proposed strategy. In addition, this strategy is easily integrated into available information systems and its outcomes show advantages over current participatory applications.

In 2014, the International Union for Conservation of Nature adopted the Red List of Ecosystems (IUCN RLE) criteria as the global standard for assessing risks to terrestrial, marine, and freshwater ecosystems. Identifying and quantifying the impacts of biodiversity assessments on the status of nature is key to justifying continued investment in assessments and enabling strategic planning to maximize future impact. In this policy perspective, we use an established impact evaluation framework to identify the impacts of the IUCN RLE since its inception. To date, 1,397 ecosystem units in 100 countries have been assessed following the IUCN RLE protocol. Systematic assessments are complete or underway in more than 25 countries and two continental regions (the Americas and Europe). Countries with established ecosystem red lists have already used them to inform legislation, land-use planning, protected area expansion, monitoring and reporting, and ecosystem management. IUCN RLE indices based on systematic assessments have high potential to inform global biodiversity reporting for the Aichi Targets and the United Nations Sustainable Development Goals. Expanding the coverage of IUCN RLE assessments, building capacity to undertake them, and establishing stronger policy instruments to manage red-listed ecosystems will be key to maximizing conservation impacts over the coming decades.

SLEUTH Model (slope, landuse, exclusion, urban extent, transportation and hillshade) is an important tool for landuse planning and land policy. To evaluate the performance of SLEUTH model, implementation of Sensitivity Analysis (SA) is essential. The main limitation of SA in SLEUTH application is a lack of insight into model input self-modification parameters (SMPs) variation, namely, uncertainty involved in the model transfer metrics and model presumptions, which often misled the decision makers and model users. To address this issue, this study divided the forward process into two stages. Firstly, during the transfer process ①, the contribution scores of five SMPs were drawn, and parameters highly sensitive to model output were given. Apart from that, the recommended initial value for SMPs of 0.11, 0.2, 0.87, 1.13, 15, 1.01, 0.49 were found to be subordinated to such a heterogeneous urban area simulation. Secondly, during the transfer process ②, SMP caused imagery metrics indicated the disparity between parameters with Fixed Reference and with Successive Reference. Reversely, it derives reasonable threshold for the best fit values of five prediction coefficients’ initialization by comparing the real image with the predicted one. The framework of SLEUTH model transfer mechanism not only could distinguish highly sensitive SMPs with higher contribution scores, but also could give parametric analysis for simulation imagery based on metrics. The study was found to be a practical tool for quantization response of model input variables for modelling complex urban systems. So, this insight can help geographic information scientists decide how to find out the inner forward transfer mechanism of SLEUTH model for further make good use of it and improve the model.

Worldwide, there is a significant increase in the use of unmanned aerial vehicles (UAVs) by emergency services. They offer a lot of possibilities during the rescue operation. Such a wide application for various purposes and environments causes many threats related to their use. To minimize the risks associated with conducting air operations with UAVs, the SORA methodology will be important. Due to its level of detail, it is a methodology adapted to civilian use. In this article, the authors' team will try to develop guidelines and directions for adapting SORA to the requirements of the operational work of emergency services. Thus following article aims to present the most important risks related to conducting operations with the use of UAVs by First Responders (FRs) and to show the sample risk analysis performed for this type of operation on the example of the ASSISTANCE project. The paper describes, on the one hand, possibilities offered by UAVs in crisis or disaster management and step-by-step Specific Operations Risk Assessment (SORA) and on the other hand, presents possible threats, consequences and methods of their mitigation during FRs missions.

Mistrust between scientists and non-scientist stakeholders is a key challenge in fishery management. This problem is exacerbated with the use of complex models to support management: these models suffer from difficulties in communicating their results and a lack of confidence from end users. The European eel is an illustrative example; its complex life cycle raises problems of coordination and discussion among the multiple actors involved in the management of the species. The GEREM model has been proposed as a tool for estimating recruitment, but its complexity, which is essential for addressing the characteristics of the species, makes it difficult to understand and accept by all stakeholders. In the context of the SUDOANG project, we proposed a co-parametrization of this assessment model to tackle this mistrust. Through the use of various questionnaires and appropriate statistical analyses, stakeholders were involved in two important choices for the model (zone definition and prior construction). Regular workshops and presentations were organised to explain the model rationales and to gather feedback and expectations. The results show that stakeholders have very similar perceptions of the potential definitions of sub-areas of recruitment in south-western Europe, and these perceptions are consistent with the underlying environmental conditions. On the other hand, the stakeholders have contrasting opinions about the exploitation rates of fisheries in different river basins, and the use of their knowledge currently has little effect on GEREM estimates. More importantly, the overall approach of this study is thought to have reconstructed the trust and confidence among participants.

Risk assessment management have been a hot topic for the researchers since a very long time. Software risk management is an important part of project management as it contains the identification, analysis, estimation and monitoring of different risks present in the system. This helps developers in decision making while assessing the problems that could arise in the software systems. Risk management is very complex in large scale system as these systems have very complex development. The paper describes risk management techniques for large scale system. Furthermore we have provided a detailed comparative analysis of these techniques with commonly identified risks in software systems and have provided a systematic order for risk management process to ensure risk mitigation.

Even though the rules for free movement of machinery within the European Union market have existed for more than 30 years, accidents related to their activities have constantly been achieving significant value. When designing the machine, a designer must stem from risk assessment, whereas all stages of its life cycle and ways of its use must be taken into consideration. In industrial operations, there is old machinery, which, although fulfilling its function reliably, the safety level is not in accordance with the developing requirements for their safe operation. The proposed methodology of assessment of the machinery safety condition comes out from the presupposition of the right application of steps of risk assessment and their reduction mainly by means of implementation of both effective and efficient preventive measures. The aim of the research applied in 3 operations, was to verify the method of machinery safety management. The created methodology based on 19 requirements for safety evaluates the level of the actual measures by means of the so-called criterion of current status and total efficiency of measures. Its output is the assessment of the efficiency level of implemented safety of each machine as well as of the whole operation.

CONTEXT– Energy is widely involved in human activity and corresponding emissions of SOX, NOX and CO2 from energy generation processes affect global climate change. Clean fuels are desired by society because of their reduced greenhouse gas emissions. Hydrogen is once such candidate fuel. Much hydrogen is produced from fossil fuel, with biomass being an alternative process. OBJECTIVE– The project compared the environmental impact of hydrogen production by natural gas steam reforming vs. biomass gasification. METHOD–Environmental impact was calculated from the input and output data from life cycle inventory analysis. The impact assessment was focused on greenhouse gas emission, acidification, and eutrophication. Models of the two processes were developed and analysed in OpenLCA. The agribalyse database was used to connect inventory flow data to environmental impacts. FINDINGS– For all three metrics, biomass gasification had lower impacts than natural gas steam reforming, sometimes by large margins. For biomass gasification the silica sand production contributes most to all three impact categories, whereas for natural gas steam reforming it is the LPG extraction.

As part of the efforts to reduce the environmental impacts caused by the aviation sector, the use of bio-based instead of fossil-based materials has been assessed as a possible mitigation option. Natural Fibre Polymer Composites have proven to have a higher environmental performance in the automotive sector and are emerging as an option for weight reduction in aircraft. This study quantifies, though Life Cycle Assessment, the environmental performance of specific flax-based composite panels intended for aircrafts as interior fitting elements (i.e. partition panels, tray tables, baggage compartments) compared to a glass fibre/epoxy composite with a honeycomb core. Through system expansion, the fate of co-products issued from the production of the flax fibre technical textile used as reinforcement in the biocomposite material were considered in the assessment. Results showed that for an application in the aeronautics sector, the weight of the panels is the upmost critical parameter shaping the overall environmental performance of panels. Focusing on the panel production only, the biocomposite panel showed a higher environmental performance in the categories of climate change and marine eutrophication compared to the conventional panel, and the fire suppressant agent was identified as the main contributor to the environmental impacts of the bio-based panel. Yet these gains were negligible when considering the full life cycle of the panels, due to the higher weight (14%) of the bio-based panels; which is linked to the bio-based panel being at a prototype stage.In order to improve the environmental performance of the biocomposite panel and thus reduce its weight, it was shown relevant to optimize geometry of the panel itself, especially its core, so less resin could be used.

Assessing the economic supply of biomass in a geospatial context while accounting for risk from natural disasters was studied. Risk levels were estimated from a component of factors which included: population density, road density, federal ownership, U.S. Environmental Protection Agency ecoregions, and Presidential Disaster Declarations. The Presidential Disaster Declarations included risks due to: coastal storm, drought, fire, flood, freezing, hurricane, mud land slide, severe ices, severe storms, snow, tornado, and tropical storm. Presidential Disaster Declarations included summaries based on a short-term time period from 2000-2011, and on a long-term time period from 1964-2011. Risk categories were developed as a function of the number of disaster declarations, agricultural-to-forest land ratio, average road density, and average population density. A significant contribution of the research was the allocation of spatially explicit data using GIS technology at the 5-digit zip code tabulation area. The average area for 5-digit ZCTAs in the Eastern U.S. study region was approximately 169 kilometers². Long-term risk (1964-2011) from disaster declarations had a greater impact on the economic availability of biomass supply relative to short-term declarations (2000-2011). The greatest risk to biomass supply came from population density relative to the other risk factors studies. Of the 25,044 total ZCTAs, 12,256 ZCTAs were in locations that did not include population density ≥ 150/km², road density ≥ 14 km/km², federal ownership, and US Environmental Protection Agency Level III ecoregions. Of the remaining 12,256 ZCTAs, 26.8% were considered to be moderate-to-high risk based on short-term declarations (2000-2011) and 29.4% were considered to be moderate-to-high risk based on long-term declarations (1964-2011). Lower risk locations for procuring biomass supply for both short-term and long-term declarations, across all risk factors, were in southern Georgia, South Carolina, and Texas.

Levels of trace element pollution in surface soil can be estimated using soil analyses and leaching tests. These methods may reveal different results due to the effect of soil properties, such as grain size and mineral composition, on elemental availability. Therefore, this study advocates an alternative method for monitoring and assessment of trace element pollution in surface soil using terricolous fruticose lichens. Lichens growing at abandoned mine sites and unpolluted areas in southwest Japan and their substrata were analyzed using inductively coupled plasma-mass spectrometry and X-ray fluorescence spectrometry to clarify the relationships between Cu, Zn, As, and Pb concentrations in lichens and soils, including their absorption properties. Concentrations of these elements in the lichens were positively correlated with those in the soils regardless of lichen species, location, habitat, or conditions of soils. The analyzed lichens had neither competitive nor antagonistic properties in their elemental absorption, which made them good biomonitors of trace element pollution in surface soil. The distribution maps of average Cu, Zn, As, and Pb concentrations at each sampling region detected almost all of the Cu, Zn, and As pollution of the soils. Therefore, lichens could be used in practical applications to monitor Cu, Zn, and As pollution in surface soils.

Type two diabetes mellitus (T2DM) represents a chronic condition with increasing prevalence worldwide among the older population. T2DM condition increases the risk of micro and macro-vascular complications as well as the risk of geriatric syndromes as falls, fractures and cognitive impairment. The management of T2DM in the older population represents a challenge for the cli-nician, and a Comprehensive Geriatric Assessment should always be prioritized, in order to tailor the glycate haemoglobin target according to functional and cognitive status comorbidities, life ex-pectancy and type of therapy. According to the most recent guidelines, older adults with T2DM should be cathegorized in three groups: healthy patients with good functional status, patients with complications and reduced functionality and patients at the end of life; for each group the target for the glycemic control is different, also according to the type of treatment drug. The therapeutic ap-proach should always begin with lifestyle changes; after that, several lines of therapies are available, with different mechanism of action and potential effect other than glucose level reduction. Partic-ular interest is growing around sodium-glucose cotransporter-2 inhibitors, due to their effect on the cardiovascular system. In this review we evaluate the therapeutic options available for the treat-ment of older diabetic patients, to ensure a correct treatment approach

Decision tables have been used for many years in data processing and business applications to simulate complex rule sets. Several computer languages have been developed based on rule systems and they are easily programmed in several current languages. Land management and river-reservoir models simulate complex land management operations and reservoir management in highly regulated river systems. Decision tables are a precise yet compact way to model the rule sets and corresponding actions found in these models. In this study, we discuss the suitability of decision tables to simulate management in the river basin scale Soil and Water Assessment Tool (SWAT+) model. Decision tables are developed to simulate automated irrigation and reservoir releases. A simple auto irrigation application of decision tables was developed using plant water stress as a condition for irrigating corn in Texas. Sensitivity of the water stress trigger and irrigation application amounts were shown on soil moisture and corn yields. In addition, the Grapevine Reservoir near Dallas, Texas was used to illustrate the use of decision tables to simulate reservoir releases. The releases were conditioned on reservoir volumes and flood season. The release rules as implemented by the decision table realistically simulated flood releases as evidenced by a daily NSE (Nash-Sutcliffe Efficiency) of 0.52 and a percent bias of -1.1%. Using decision tables to simulate management in land, river and reservoir models was shown to have several advantages over current approaches including: 1) mature technology with considerable literature and applications, 2) ability to accurately represent complex, real world decision making, 3) code that is efficient, modular and easy to maintain, and 4) tables that are easy to maintain, support, and modify.

The nationwide lockdown imposed to control the spread of novel coronavirus induced dramatic alterations in different sectors of the Nepalese governance, including Solid Waste Management (SWM) practices. The study identifies SW collection gaps in seven major cities of Nepal and highlights the municipal and public households on SW management practices before and during the lockdown to emphasize the linkage between COVID-19 and SWM. It includes information on solid waste status, collection frequency and coverage, workers safety practices, types of vehicles operated for collection and alternative methods adopted by households to manage SW during the lockdown. For this, 1329 households survey and key informant interviews were conducted in seven cities of Nepal during the lockdown. It was found that although the coverage of the collection service was similar during the pandemic, there was a drastic decrease in the collection frequency leading to a collection gap of around 570 tons/day. More than 50% of the surveyed households adopted no proper alternative measures as they claimed that they stored solid waste with proper management so that municipal authorities can take it. The study reveals poor occupational health and safety practices among the solid waste workers due to the unavailability of safety gears and equipment despite being aware of the modes of transmission of the virus. The pandemic exacerbated the challenges of smooth SWM as it is an essential and needy service. This study highlights the need for a timely strategic management framework to be developed by the government to continue the smooth SWM practices during the lockdown.

Changes in extreme weather patterns are expected under climate change. In this study, a risk assessment was conducted using 4 building damage history datasets and 33 weather datasets (precipitation, wind speed, snow, and temperature) from 230 regions in South Korea to quantitatively analyze and predict building damage caused by potential future natural disasters. Decision tree analysis was used to evaluate building damage risk in 230 regions. The decision tree model to determine the risk of flood, gale, and typhoon was generated, which excluded gales, with less damage. The weight (variable importance) and limit value (damage limit) of the weather variables ware derived using the decision tree model. Using these two factors, we assessed the building damage risk in 230 regions in South Korea until 2100. The number of regions at risk of flood damage increased by more than 30% in average. Conversely, regions at risk of snowfall damage decreased by more than 90%. The regions at risk of typhoons decreased by 57.5% on average, and the number of regions at high risk of typhoon damage increased by up to 62.5% in RCP 8.5. These results can be used as objective data to minimize future building damage throughout South Korea, representing the first step towards sustainable development in the region with respect to disaster response.

The good management of the building maintenance should be based on the regular maintenance work. Repair works are often not carried out or there are shifts in time, which causes degradation of the building. The article presents a method of planning renovation works of a MUBAR (maintenance Management in an Un-renovated Building with Abandoning Renovation) based on the consequences in case of their lack. No renovation work on individual elements in a building can cause a threat to the stability of the building structure, risking the lives of users, continuing damage to the building by damaging further elements, or even a building disaster. The method can also be applied to historic buildings. Often, due to abandonment of repairs caused most often by lack of the owner, improper manager or irresponsible users, degradation of these objects occurs. The consequences of neglected renovation of buildings lead to irreversible processes of their destruction. The aim of the article is to present the developed method of planning renovation works based on the consequences of lack of renovation works.

Dams design and their operation cause strong environmental alteration and therefore a long-term debate is ongoing for the scale of these projects. At the same time, the concept of Environmental Flow Assessment (EFA) is a crucial element of modified ecosystems featuring large infrastructure such as dams and reservoirs for mitigating potential environmental degradation while they operate. Nowadays, integrated scientific frameworks are required to quantify the risks caused by large infrastructure. Through the use of stochastic analysis, it is possible to quantify these uncertainties, and present a solution that incorporates long-term persistence and environmental sustainability into a balanced reservoir simulation model. In this work, an attempt is made to determine a benchmark reservoir size incorporating hydrological and ecological criteria though stochastic analysis. The primary goal is to ensure the best possible conditions for the ecosystem, and then secondarily to allow a steady supply of water for other uses. Using a synthetic timeseries based on historical inputs, it is possible to determine and preserve essential statistical characteristics of a river’s streamflow, and use these to detect the optimal reservoir capacity that maximizes environmental and local water demand reliability.

Nowadays, frameworks and models are critical to enabling organizations to identify their current sustainability integration into business and to follow up on these initiatives over time. In this context, the maturity models offer a structured way of analyzing how a supply chain meets specific sustainability requirements and which areas demand attention to reach maturity levels. This study proposes a five-level maturity model to help supply chains identify their level of engagement with sustainability practices combining three perspectives: intra and inter-organizational sustainability practices, triple-bottom-line approach and critical areas for sustainability. All the steps followed in constructing the maturity model were based on a literature review, and case studies supported its improvement, application, and testing. The proposed model presents many advantages, such as being used as a self-assessment tool, a roadmap for sustainability behaviour improvement, and a benchmarking tool to evaluate and compare standards and best practices among organizations and supply chains.

Currently available nationwide prediction models for fine particulate matter (PM_2.5) lack prediction confidence intervals and usually do not describe cross validated model performance at different spatiotemporal resolutions and extents. We used 41 different spatiotemporal predictors, including data on land use, meteorology, aerosol optical density, emissions, wildfires, population, traffic, and spatiotemporal indicators to train a machine learning model to predict daily averages of PM_2.5 concentrations at 0.75 sq km resolution across the contiguous United States from 2000 through 2020. We utilized a generalized random forest model that allowed us to generate asymptotically-valid prediction confidence intervals and took advantage of its usefulness as an ensemble learner to quickly and cheaply characterize leave-one-location-out CV model performance for different temporal resolutions and geographic regions. Using a variable importance metric, we selected 8 predictors that were able to accurately predict daily PM_2.5, with an overall leave-one-location-out cross validated median absolute error of 1.20 ug/m³, an R² of 0.84, and confidence interval coverage fraction of 95%. When considering aggregated temporal windows, the model achieved leave-one-location-out cross validated median absolute errors of 0.99, 0.76, 0.63, and 0.60 ug/m³ for weekly, monthly, annual, and all-time exposure assessments, respectively. We further describe the model’s cross validated performance at different geographic regions in the United States, finding that it performs worse in the Western half of the country where there are less monitors. The code and data used to create this model are publicly available and we have developed software packages to be used for exposure assessment. This accurate exposure assessment model will be useful for epidemiologists seeking to study the health effects of PM across the continental United States, while possibly considering exposure estimation accuracy and uncertainty specific to the the spatiotemporal resolution and extent of their study design and population.

This paper addresses the problem of assessing and optimizing acoustic positioning system for underwater target localization with range measurements only. We present a new three-dimensional assessment model to assess the optimal geometric beacon formation whether meet user needs. For the sake of mathematical tractability, it is assumed that the measurements of the range between the target and beacons are corrupted with white Gaussian noise with variance is distance-dependent. Then by adopting dilution of precision (DOP) parameters in the assessment model, the relationship between DOP parameters and positioning accuracy is derived. In addition, the optimal geometric beacon formation that will yield the best performance is achieved by minimizing the values of geometric dilution of precision (GDOP) on condition that the position of target is known and fixed. Next, in order to make sure whether the estimate positioning accuracy over interesting region satisfy the precision needed by the users, geometric positioning accuracy (GPA), horizonal positioning accuracy (HPA) and vertical positioning accuracy (VPA) are utilized to assess the optimal geometric beacon formation. Simulation examples are designed to illustrate the exactness of the conclusion. Unlike other work which only use GDOP to optimize the formation and cannot assess the performance of the specified dimensions, this new three-dimensional assessment model can assess the optimal geometric beacon formation in each dimension for any point in three-dimensional space, which can provide users with guidance advices to optimize performance of every specified dimension.

The Internet-of-Things (IoT) triggers new types of cyber risks. Therefore, the integration of new IoT devices and services requires a self-assessment of IoT cyber security posture. By security posture this article refers to the cybersecurity strength of an organisation to predict, prevent and respond to cyberthreats. At present, there is a gap in the state-of-the-art, because there are no self-assessment methods for quantifying IoT cyber risk posture. To address this gap, an empirical analysis is performed of 12 cyber risk assessment approaches. The results and the main findings from the analysis is presented as the current and a target risk state for IoT systems, followed by conclusions and recommendations on a transformation roadmap, describing how IoT systems can achieve the target state with a new goal-oriented dependency model. By target state, we refer to the cyber security target that matches the generic security requirements of an organisation. The research paper studies and adapts four alternatives for IoT risk assessment and identifies the goal-oriented dependency modelling as a dominant approach among the risk assessment models studied. The new goal-oriented dependency model in this article enables the assessment of uncontrollable risk states in complex IoT systems and can be used for a quantitative self-assessment of IoT cyber risk posture.

Environmental assessment is a concept that has been designed to facilitate the present generation to meet their needs without compromising the ability of future generations to meet their own needs as well. Thus, this concept has drawn significant attention from various scholars, researchers and industrial practitioners around the world over the past three decades. Life Cycle Environmental Assessment (LCEA) is a widely metric used to assess the potential ecological impacts, which can be caused by electricity generating supply systems or by other systems than power production plants. However, the current LCEA model is biased and ineffective. Because, its omits factors that are increasingly contributing to the ecological degradation. This study has identified the omitted factors through a critical analysis of a set of previous journal articles conducted in the energy sector. In light of this, this study has developed a novel LCEA framework addressing those blind spots. The framework developed in this study is holistic in nature including all the life cycle stages of a power supply system such as Extraction of the Raw Material (ERM), Transport of Raw Material (TRM), Conversion of Raw into Electricity (CRE), and Transmission and Distribution of Electricity (TDE) to the end users. The novel developed LCEA model has been tested and applied to nine power generation plants such as coal, gas, nuclear, biomass, geothermal, hydro, solar thermal, wind onshore and wind offshore. The results have demonstrated that of conventional technologies including coal, gas, and nuclear, coal energy generating source has got the highest life cycle greenhouse gas Grid Emission Factor (GEF) of 2866 kg CO2e/MWh, followed by gas with 728 kg CO2e/MWh, and nuclear has got the least GEF of 35 kg CO2e/MWh. Whereas of renewable energy sources biomass has got the highest GEF of 1508 kg CO2e/MWh, followed by solar thermal with 46.6 kg CO2e/MWh, hydro 39 kg CO2e/MWh, wind offshore 25.25 kg CO2e/MWh, wind onshore 10.1 kg CO2e/MWh, and geothermal closes the ranking with 6.23 kg CO2e/MWh.

Substantial studies have focused on early detection of Alzheimer's disease (AD). Cerebral amyloid beta (Aβ), is hallmark of AD, can be observed in vivo via positron emission tomography imaging using amyloid tracer or cerebrospinal fluid assessment, but costly expensive. The current study aims to identify and compared predictability in magnetic resonance imaging (MRI) markers and neuropsychological markers to predict cerebral Aβ status in AD cohort using machine learning (ML) approaches. The predictability in candidate markers for cerebral Aβ status was examined by analyzing 724 participants from the ADNI-2 cohort. Demographic variables, structural MRI markers, and neuropsychological test scores were used as input in several ML algorithms to predict cerebral Aβ positivity. Out of five combination of candidate markers, neuropsychological markers with demographics showed the most cost-efficient result. A feature selection model could distinguish abnormal levels of Aβ with the predictability of 0.85, indicating the same performance with MRI-based models. The result has first to identified the predictability in MRI markers using ML approaches, and secondary to demonstrate the neuropsychological model with demographics could predict Aβ positivity, suggesting a more cost-efficient method for detecting cerebral Aβ status compared to MRI markers.

Capturing complexity is both a conceptual and a practical challenge in palliative care. The HexCom model has proved to be an instrument with strong reliability and valid for describing the needs and strengths of patients in home care. In order to explore whether it is also perceived to be helpful in enhancing coordinated and patient-centered care at a practical level, a methodological study was carried out to assess the face validity of the model. Particularly, a Delphi method involving a group of 15 experts representing the full spectrum of healthcare professionals involved in palliative care was carried out. The results show that there is a high level of agreement, with a Content Validity Index-Item greater than 0.92 both with regard to the complexity model and the HexCom-Red, HexCom-Basic and HexCom-Clin instruments, and higher than 0.85 regarding the HexCom-Figure and the HexCom-Patient instruments. This consensus confirms that the HexCom model and the different instruments that are derived from it are valued as useful tools for a broad range of healthcare professional in coordinately capturing of complexity in healthcare practice.

The purpose of this paper was to analyze the development trend of hazardous chemical packaging towards low carbon economy from both qualitative and quantitative perspectives. Four types of relatively small volume packaging with volume/weight less than 450L/400kg, respectively, and three intermediate bulk containers (IBCs), which are widely used for hazardous chemicals were studied to calculate the carbon footprint (CF) from cradle to grave using life cycle assessment (LCA) method and to predict the future carbon emission of hazardous chemical packaging in the next five years (2016-2020), based on the export data of Tianjin Port in China. Grey model (GM) was adopted in the prediction. The results showed that majority of IBCs have lower carbon footprint than other types when the packaging contained same amount of same hazardous chemical. With the development of international trading, the demand of hazardous chemicals will increase as well. As the result, carbon emission generated by hazardous chemical packaging will increase accordingly. However, based on GM simulation result, increasing the amount of IBC use will effectively reduce the relative amount of carbon emission.

Savannas and adjacent vegetation types like gallery forests are highly valuable ecosystems contributing to several ecosystem services including carbon budgeting. Financial mechanisms such as REDD+ have provided an opportunity for developing countries to alleviate poverty through conservation of its forestry resources. For availing this opportunity carbon stock assessments are essential. Therefore, a research study at two protected areas i.e. Nazinga Game Ranch and Bontioli Nature Reserve, in Burkina Faso was conducted with the objective of assessing carbon Mg C ha-1 in aboveground biomass (AGB)dry of trees in different formations of the south-sudanian savanna in Burkina Faso, West Africa. Similarly analysis of various vegetation parameters was also conducted to understand the overall vegetation structure of these two protected areas. For estimating AGBdry, existing allometric equation for dry tropical woody vegetation types was used. The Importance Value Index (IVI) and Family Importance Value (FIV) were estimated through standard procedures. Various linear and non-linear regression analyses were conducted to test the relationships between carbon and other parameters such as DBH, height and basal area (BA). The results showed that both sites collectively contain mean carbon of 3.41 ± 4.98 Mg C ha-1. Amongst different vegetation types, gallery forests recorded the highest mean carbon of 9.38 ± 6.90 Mg C ha-1. The highest IVI of 115.56 at Nazinga Game Ranch was recorded for Anogeissus leiocarpa. Similarly, highest IVI of 98.59 was recorded for Mitragyna inermis at Bontioli Nature Reserve. The highest FIV was recorded for Combretaceae for both of the sites. To our knowledge, this was the first study conducted to assess the carbon stocks at the two protected areas in southern Burkina Faso. The study therefore was an attempt for addressing the knowledge gap particularly on carbon stocks of protected savannas. It could serve as a baseline for carbon stocks for future initiatives such as payment for environmental services and REDD+ at these areas.

Concrete condition assessing penetrometers need to be able to distinguish between making contact with a hard (concrete) surface as opposed to a semi-solid (corroded concrete) surface. If a hard surface is mistaken for a soft surface, concrete corrosion may be over-estimated, with the potential for triggering unnecessary remediation works. Unfortunately, the variably-angled surface of a concrete pipe can cause the tip of a force-sensing tactile penetrometer to slip and thus to make this mistake. We investigated whether different shaped tips of a cylindrical penetrometer were better than others at maintaining contact with concrete and not slipping. We designed a range of simple symmetric tip shapes, controlled by a single superellipse parameter. We performed a finite element analysis of these parametric models in SolidWorks before machining in stainless steel. We tested our penetrometer tips on a concrete paver cut to four angles at 20∘ increments. The results indicate that penetrometers with a squircle-shaped steel tip (a=b=1,n=4) have the least slip, in the context of concrete condition assessment.

The increasing amount of municipal sludge in China requires safe and effective management to protect human health and ensure environmental sustainability. Pyrolysis is a thermochemical process that that decompose organic matter at elevated temperature and under anaerobic conditions, and it has attracted an increasing attention in sludge treatment in the recent years. However, comprehensive environmental and economic assessment of sludge pyrolysis in China's context is rare, due to the small quantities of full-scale sludge pyrolysis plant. In this paper, we applied our design and operation parameters of full-scale sludge pyrolysis plants to generate the material and energy consumptions of the pyrolysis system under various of conditions, including sludge organic content and moisture content, system size, system energy distribution, and whether or not heat substitution is applied. Life cycle assessment and techno-economic assessment were then applied to investigate the environmental and economic performance of the system Our results demonstrate the significant environmental and economic impacts associated with sludge properties and system size. Generally, sludge with higher organic content and lower moisture content requires less natural gas consumption, which leads to a simultaneous improvement of the system environmental and economic performance. The system economic performance is more sensitive to the system size, and centralized sludge handling using a larger pyrolysis is more economic favorable. In the most ideal case, the average global warming potential and minimum sludge handling price of sludge pyrolysis could be as low as -32.5 kg CO₂-Eq/t DS and 188.8 $/t DS, respectively. Based on these results, we discussed the pathways that could be taken to further optimize the environmental and economic performances of the pyrolysis system.

The health of the landing gear retraction and extension hydraulic system may be assessed using fuzzy comprehensive evaluation (FCE), however the traditional FCE method depends solely on human assessment by specialists, which is excessively subjective. To address the issue of excessive human subjective variables in the assessment, an improved FCE model based on enhanced risk coefficient is provided, which includes four consideration indexes: failure probability, failure severity, failure detection difficulty, and failure repair difficulty. To reduce subjective human judgment errors entirely due to expert experience, the improved FCE takes into account the likelihood of failure using a statistical method, the severity of failure using a fault simulation analysis based on the LMS Imagine.Lab AMESim simulation platform, and the difficulty of fault detection and repair using the aircraft manufacturer's professional maintenance information. As part of the evaluation model, the range of health assessment values and accompanying treatment methods are included, making it easier to implement on a daily basis in aircraft maintenance. As a final step, the simulation is evaluated and the simulated faults are calculated.

Estimating ground surface PM2.5 with fine spatiotemporal resolution is a critical technique for exposure assessments in epidemiological studies of its health risks. Previous studies have utilized monitoring, satellite remote sensing or air quality modeling data to evaluate the spatiotemporal variations of PM2.5 concentrations, but such studies rarely combined these data simultaneously. We develop a three-stage model to fuse PM2.5 monitoring data, satellite-derived aerosol optical depth (AOD) and community multi-scale air quality (CMAQ) simulations together and apply it to estimate daily PM2.5 at a spatial resolution of 0.1˚ over China. Performance of the three-stage model is evaluated using a cross-validation (CV) method step by step. CV results show that the finally fused estimator of PM2.5 is in good agreement with the observational data (RMSE = 23.00 μg/m^3 and R2 = 0.72) and outperforms either AOD-retrieved PM2.5 (R2 = 0.62) or CMAQ simulations (R2 = 0.51). According to step-specific CVs, in data fusion, AOD-retrieved PM2.5 plays a key role to reduce mean bias, whereas CMAQ provides all-spacetime-covered predictions, which avoids sampling bias caused by non-random incompleteness in satellite-derived AOD. Our fused products are more capable than either CMAQ simulations or AOD-based estimates in characterizing the polluting procedure during haze episodes and thus can support both chronic and acute exposure assessments of ambient PM2.5. Based on the products, averaged concentration of annual exposure to PM2.5 was 55.75 μg/m3, while averaged count of polluted days (PM2.5 > 75 μg/m3) was 81, across China during 2014. Fused estimates will be publicly available for future health-related studies.

Rapid post-earthquake damage diagnosis of bridges can guide decision-making for emergency response management and recovery. This can be facilitated using digital technologies to remove the barriers of manual post-event inspections. Prior mechanics-based Finite Element (FE) models can be used for post-event response simulation using the measured ground motions at nearby stations; however, the damage assessment outcomes would suffer from uncertainties in structural and soil material properties, input excitations, etc. For instrumented bridges, these uncertainties can be reduced by integrating sensory data with prior models through a model updating approach. This study presents a sequential Bayesian model updating technique, through which a linear/nonlinear FE model, including soil-structure interaction effects, and the foundation input motions are jointly identified from measured acceleration responses. The efficacy of the presented model updating technique is first examined through a numerical verification study. Then, seismic data recorded from the San Rogue Canyon Bridge in California are used for a real-world case study. Comparison between the free-field and the foundation input motions reveals valuable information regarding the soil-structure interaction effects at the bridge site. Moreover, the reasonable agreement between the recorded and estimated bridge responses shows the potentials of the presented model updating technique for real-world applications. The updated FE model is considered as the digital twin of the bridge and can be used to analyze the bridge and monitor the structural response at element, section, and fiber levels to diagnose the location and severity of any potential damage mechanism.

(1) Background: This study aims to validate the use of Bloom's revised taxonomy as an instrument for the design of assessment tests; (2) Methods: A validation has been carried out by external judges, as well as by teachers and students, validating the instrument by means of Aiken's V; (3) Results: Judges, teachers and students consider Bloom's revised taxonomy as an effective tool for the design of assessment tests; (4) Conclusions: Using Bloom's revised taxonomy as a model for designing assessment tests promotes learning.

In the paper, the author takes stock of the conceptual reflection and empirical studies described in the current scientific literature on responsible innovation in the context of the emergence of Responsible Research and Innovation (RRI) concept. RRI has been promoted in the European Union as a part of the Europe 2020 strategy with the objective of making research and innovation more sustainable and inclusive. As more than half of the EU’s firms declare conducting innovation activities RRI problematic becomes more relevant than ever. There remain many open questions, unresolved dilemmas and empirical white spots that call for more research in this field. This paper’s main focus is the problem of RRI acceptance as a global framework for responsible innovation and the scarcity of suitable instruments that may help industry understand and adopt this concept. The main contribution of this paper are: the critical analysis of the RRI concept and its implications for industry, proposing a concept of RRI index for innovating enterprises.

In August 4 2011, United Nations Environmental Program (UNEP) submitted an unprecedented, scientific, groundbreaking Environmental Assessment Report (EAR) of Ogoniland, to the Nigerian government. This was the outcome of a 14–month intensive evaluation of the extent of pollution. It was intended that UNEP’s recommendations would be implemented to restore the devastated environment, on the one hand, and on the other, counteract the numerous environmental health issues that have for decades, plagued Ogoniland. However, five years post EAR, and, despite the seriousness of the situation, no significant resolution has occurred, both on the part of the government, and on the part of Shell Petroleum Development Company (SPDC) or Shell. To date, millions of Niger Delta residents, particularly those living in the oil-bearing communities, continue to suffer severe consequences. Although, the assessment was conducted in Ogoniland, other communities in the Niger Delta are also affected. This article explores prevailing issues, using Ogoniland (a microcosm of the Niger Delta) as an example. A multidisciplinary approach for sustainable mitigation of environmental health risks in the Niger Delta is paramount, and Environmental Management tools offer valuable strategies. Adopting UNEP’s recommendations for addressing environmental health problems requires implementing the Environmental Management/Environmental Management System (EM/EMS) model.

myfood24 is a comprehensive self-completed online 24-hour dietary recall tool currently used for nutritional assessments in epidemiological research. However, its clinical application has been unexplored. This mixed methods prospective observational study explores the acceptability and usability of myfood24 in a clinical population, women with gestational diabetes (GDM). Women were recruited at their first diabetes antenatal clinic appointment. To assess acceptability and usability, they were asked to complete five 24-hour dietary recalls using myfood24 over two weeks and a user experience questionnaire; with a subset invited to participate in a one-to-one semi-structured interview. Of the 199 participants, mean maternal age was 33 years, mean booking BMI 29.7kg/m2, 36% primiparous, 57% White, 33% Asian. Of these 121 (61%) completed myfood24 at least once and 73 (37%) completed the user questionnaire; 15 were interviewed. Usability of myfood24 was measured using the System Usability Scale (SUS) and found to be good (mean 70.9, 95%CI 67.1, 74.6). Interviews identified several areas for improvement, including optimising its use for mobile devices. myfood24 appears to be acceptable and have potential to support self-management and behaviour change for women with GDM but requires adaptation to record blood glucose results alongside real-time tracking of diet.

Objectives To develop and validate a prediction model for 28-day in-hospital mortality among adult patients critically ill with COVID-19 in the UK. Design Observational cohort study. Setting 287 adult critical care units in England, Wales and Northern Ireland, of which 260 admitted at least one eligible patient. Participants 10,933 patients with confirmed COVID-19 of whom 10,401 were eligible (excluding 532 patients with a duration of critical care less than 24 hours and 1 patient with unknown 28-day outcome): 8,666 development (March-April 2020) and 1,735 temporal validation (May-August 2020). Main outcome measures 28-day in-hospital mortality from start of critical care. Results Two models were developed using 14 patient level predictors selected from 30 candidate predictors, with and without adjustment for calendar time. In the temporal validation data, the model discrimination was maintained (c index 0.78) but calibration was poor, particularly for the model not adjusted for calendar time (ratio of observed to predicted mortality 0.74 versus 0.88 for the model adjusted for calendar time). Conclusions We developed and validated a prediction model for 28-day in-hospital mortality for patients critically ill with COVID-19. Although absolute predictions were inaccurate due to changing outcomes, the models will support risk-adjustment in analyses and monitoring changes in risk-adjusted outcome over time.

This article is about school evaluation. The objective was to explain critically the mediating relationships between educational evaluation and the production of school knowledge from the perspective of the Dialectical Historical Materialism. With this interest, a documentary analysis was made, obtaining as result four explanatory categories: production, subsumption, distribution and exchange of knowledge, which form a concrete totality with distinctions and antagonistic relationships between them, limited by their opposite. It is concluded that the evaluation as a mediating form lacks antagonistic pair and consequently of control by opposition, emerging from the school daily as autonomous and sovereign entity, oppressive of school subjects.

Groundwater is an important resource for many countries and its scarcity is a major concern in small territories, especially in the islands where the constant extraction is creating a high risk of public calamity. This issue has been increasing because of the anthropogenic activities and the climate change and it has called the attention of scientists and stakeholders in order to assess the sustainability of the water management system, and therefore, to establish strategies for a more sustainable water use. San Andres island was taking as case study and a description of the water balance was carried out in order to understand the management system. Then, a water system sustainability assessment was performed with indicators such as water security, water quality, drinking water, sanitation, infrastructure, climate robustness, biodiversity, attractiveness, and governance, according to the City Blueprint Methodology. The result for the 24 evaluated indicators was a score of 3.2, whose interpretation is “an unsustainable water management”. The qualitative assessment was the base to propose water security, water quality, and governance strategies to improve the water management in the island. The assessment and its discussions are relevant for the water management in small islands across the world whose economy is based on the tourism and whose water security is at a high risk.

Data dealing with the assessment of heavy metal pollution in road dusts in Jeddah, Saudi Arabia and its implication to human health risk of human exposure to heavy metals, are scarce. Road dusts were collected from five different functional areas (traffic areas TA, parking areas PA, residential areas RA, mixed residential commercial areas MCRA and suburban areas SA) in Jeddah and one in rural area (RUA) in Hada Al Sham. We aimed to measure the pollution levels of heavy metals and estimate their health risk of human exposure applying risk assessment models described by USEPA. Using geo-accumulation index (I_geo), the pollution level of heavy metals in urban road dusts was in the following order Cd > As > Pb > Zn > Cu > Ni > Cr > V > Mn > Co > Fe. Urban road dust was found to be moderately to heavily contaminated with As, Pb and Zn, and heavily to extremely contaminated with Cd. Calculation of enrichment factor (EF) revealed that heavy metals in TA had the highest values compared to that of the other functional areas. Cd, As, Pb, Zn and Cu were severely enriched, while Mn, V, Co, Ni and Cr were moderately enriched. Fe was consider as a natural element and consequently excluded. The concentrations of heavy metals in road dusts of functional areas were in the following order: TA > PA > MCRA > SA > RA > RUA. The study revealed that both children and adults in all studied areas having health quotient (HQ) < 1 are at negligible non-carcinogenic risk. The only exception was for children exposed to As in TA. They had an ingestion health quotient (HQ_ing) 1.18 and a health index (HI) 1.19. The most prominent exposure route was ingestion. The cancer risk for children and adults from exposure to Pb, Cd, Co, Ni, and Cr was found to be negligible (< 1 x 10^-6).

The industry is increasingly relying on fish for toxicity assessment. However, current guidelines for toxicity assessment focus on teratogenicity and mortality. From an ecotoxicological point of view, however, these endpoints may not reflect the “full picture” of possible deleterious effects that can nonetheless result in decreased fitness and/or inability to adapt to a changing environment, affecting whole populations. Therefore, assessing sublethal effects add relevant data covering different aspects of toxicity at different levels of analysis. Impacts of toxicants on neurobehavioral function have the potential to affect many different life-history traits, and are easier to assess in the laboratory than in the wild. We propose that carefully-controlled laboratory experiments on different behavioral domains – including anxiety, aggression, and exploration – can increase our understanding of the ecotoxicological impacts of contaminants, since these domains are related to traits such as defense, sociality, and reproduction, directly impacting life-history traits. The effects of selected contaminants on these tests are reviewed, focusing on larval and adult zebrafish, showing that these behavioral domains are highly sensitive to small concentrations of these substances. These strategies suggest a way forward on ecotoxicological research using fish.

The building sector of most tropical countries still use predominantly primary biomass as the principal fuel. This has adverse effects like CO2 emission and deforestation and is associated with issues like poverty, ill-health, and low standard of living. Therefore, energy policies try to improve on the efficiency of firewood and charcoal end-use technologies, to palliate the negative effects. In this research, the global change assessment model (GCAM) is used, to investigate the impact of efficiency improvement on the energy consumption pattern of the building sector of developing countries. The aim of the study is to provide empirical data that would better inform policymakers on the effects of modernizing these primary fuels. The study developed three scenarios with different levels of efficiency improvements. The results show that efficiency improvement rather increases primary biomass consumption and CO2 emission. However, there is a fall in the consumption of traditional biomass in the second half of the modelling period. The increase in biomass-based fuels consumption was seen to be linked to their affordability. Therefore, policymakers need not only elaborate policies that improve biomass efficiency, but also introduce and motivate other clean cooking fuels like butane, biogas, and electricity.

We present an updated design process for adapting and integrating existing cyber risk assessment approaches for impact assessment for the risk from IoT to the digital economy. The new design process includes a set of changes to the original standards (e.g. NIST) that are adapted for the IoT cyber risk in this paper. This paper also presents a new framework for impact assessment of IoT cyber risk, specific for the digital economy.

Life cycle assessment (LCA) is being included formally in EcoDesign regulations. Especially product carbon footprint will be mandatory in Europe. However, life cycle impact assessment including global warming potential (GWP) in LCA is hampered by several challenges. One of these is lack of water vapor characterization indexes for GWP. A life cycle inventory profile for air transport fuel including water vapor emissions is evaluated with state-of-the-art practice, i.e. EF Method and ILCD 2011 Midpoint+ and neglecting water vapors high altitude GWP compared to carbon dioxide. Then the characterization factor in GWP100 for water vapor and alternate normalization for particulates are introduced. The results are compared. The main findings are that the EF method and ILCD both generate rather realistic results for Particulate Matter and Respiratory Inorganics mid-point indicators, respectively, but the amount of premature deaths should be better allocated to different specific emissions, and that water vapor may dominate the GWP100 result over the usual carbon dioxide. LCIA mid-points need measurable and understandable bases. The common knowledge of water vapor’s GWP100 should not be neglected in LCIA for air transport and beyond where relevant.

Cyber-threat is now a global concern to all internet users, as the rate of crimes has tremendously changed from physical to virtual. Implementing awareness programs at various organization levels is required, Also there is a need to know the methodologies used in measuring cybersecurity awareness program effectiveness. The paper aims to review and explore the previous methodologies applied, target organizations, and application of Machine Learning techniques in the assessment of awareness programs. Systematic literature review techniques were used to conduct the search using pre-defined keywords and published papers from 2006 to 2019, the information was used in providing an answer to the research questions. The finding shows questionnaire was widely used as a method of evaluating cybersecurity awareness and also organizations implement more awareness programs, the gap found is the lack of using ML in assessing the effectiveness of design, and implemented cybersecurity awareness programs

Malnutrition is a serious problem with negative impact on the quality of life and the evolution of our patients, contributing to an increase in morbidity, hospital stay, mortality and health spending. Early identification is fundamental to implement the necessary therapeutic actions involving adequate nutritional support to prevent or reverse malnutrition. This review presents two complementary methods of fighting malnutrition: nutritional screening and nutritional assessment. Nutritional risk screening is conducted using simple, quick-to-perform tools and is the first line of action in detecting at-risk patients. It should be implemented systematically and periodically on admission to hospital or residential care, as well as on an outpatient basis for patients with chronic conditions. Once patients with a nutritional risk have been detected they should undergo a more detailed nutritional assessment to identify and quantify the type and degree of malnutrition. This should include health history and clinical examination, dietary history, anthropometric measurements, evaluation of the degree of aggression determined by the disease, functional assessment and, whenever possible, some method of measuring body composition.

The objective was to assess the instrumental validity and the test-retest reliability of a low-cost hand-held push dynamometer adapted from a load-cell based hanging scale (tHHD) to collect compressive forces in different ranges of compressive forces. Three independent raters applied 50 pre-established compressions each on the tHHD centered on a force platform in 3 distinct ranges: ~70 N, ~160 N, ~250 N. Knee isometric strength was also assessed on 19 subjects in two sessions (48h apart) using the tHHD anchored by an inelastic adjustable strap. Knee extension and flexion were assessed with the participant seated on a chair with the feet resting on the floor, knees, and hips flexed at 90°. The isometric force peaks were recorded and compared. The ICC and the Cronbach’s α showed excellent consistency and agreement for both instrumental validity and test-retest reliability, as the correlation and determination coefficients. The SEM and the MDC analysis returned adequate low values with a coefficient of variation less than 5%. The Bland-Altman results showed consistency and high levels of agreement. The tHHD is a valid method to assess the knee isometric strength, showing portability, cost-effectiveness, and user-friendly interface to provide an effective form to assess the knee isometric strength.

The article considers an approach to the problem of assessing the quality of speech during speech rehabilitation as a classification problem. For this, a classifier is built on the basis of an LSTM neural network for dividing speech signals into two classes: before the operation and immediately after. At the same time, speech before the operation is the standard to which it is necessary to approach in the process of rehabilitation. The metric of belonging of the evaluated signal to the reference class acts as an assessment of speech. An experimental assessment of rehabilitation sessions and a comparison of the resulting assessments with expert assessments of phrasal intelligibility were carried out.

Life Cycle Assessment (LCA) is a widely recognized tool used to evaluate environmental impacts of a product or process, based on the environmental inventory database and bills of material. Data quality is one of the most significant factors affecting the analysis results. However, currently most datasets in inventory databases are generic i.e., they may represent material and energy flow of a process at market average, instead of a specific process used by a manufacturer. As a result, stockholders are unable to track their supply chain to find out the actual environmental impact from each supplier and to compare the environmental performance of alternative options. In this paper, we developed a new framework i.e., blockchain based LCA (BC-LCA), where block-chain technology is adapted to secure and transmit inventory data from upstream suppliers to downstream manufacturers. With BC-LCA, more specific data can be acquired along the supply chain in a real-time manner. Moreover, the availability, accuracy, privacy, and automatic update of inventory data can be improved. A case study is provided based on an industrial supply chain, to demonstrate the utilization of BC-LCA.

The COVID-19 pandemic changed the world of medical education, moving it years ahead of time into the future. Many concepts needed to be changed, so did the methodologies. Nevertheless, clinical assessment remained tricky. This work highlights the outcome of the work of College of Medicine and Medical Sciences at the Arabian Gulf University in Bahrain in performing virtual clinical examination using Zoom™. Tips in this article are meant to help plan, implement and evaluate clinical assessments virtually.

This work is aiming to motivation on the prospect of evolving new thiazole dyes with respectable application properties, expected pharmacological activities. Curcumin Coupling with diverse diazonium salts of 2-amino thiazole derivatives as 2-aminobenzothiazole, 2- amino-5-phenylthiazole, 2 amino-5-methylthiazole and 2 amino-5-nitrothiazole to produce novel azo dyes. All synthesised dyes were completely confirmed their structures via elemental and spectroscopic techniques. The synthesised thiazole derivatives were examined for their “antimicrobial, anticancer and antioxidant” activities. All of the synthesized dyes were applied on synthetic fabrics as polyester and successively their dyeing properties, “light, washing, perspiration, rubbing and sublimation” fastness were evaluated. Prepared dyestuffs are suitable for dyeing polyester fabrics. It was initiate that all of prepared dyes own extraordinary colour hue, along with respectable fastness properties. Also the synthesised thiazole derivatives display moral pharmacology activity.

The current study aimed to: i) Monitor levels of PM₁₀, at Shebika, Haram, Masfala, Azizia, Awali and Mina in Makkah city, KSA during the period of 01 Shawwal 1436H – 27 Rabi Al-Awwal 1437H, by using LVS instruments; and; 2) assess health risk (non-cancer and cancer risks) on humans (children and adult) exposed to PM₁₀ in ambient air of Makkah city.The results showed that: the high PM₁₀ levels were found in Haram site, while the lower levels were found in Awali site. These levels were lower than that set for PM₁₀ by PME (Daily limit of 340 µg/m³). Vehicles emissions and constructions sources may be the main source of PM₁₀ levels in Makkah city. The human health risk assessments showed that: the daily exposure doses of PM₁₀ were ranked in the order: D_ing > D_dermal > D_inh for children and adult in Makkah city. Ingestion of PM₁₀ particles was the main exposure pathway for both children and adults. The HIs and cancer risk values were within the safe level, indicating that (non-carcinogenic and carcinogenic) risks for humans exposed to PM₁₀ in Makkah city were negligible.

We compared performance of a novel encoding Lempel-Ziv complexity (ELZC) with approximate entropy (ApEn), sample entropy (SmpEn) and permutation entropy (PerEn) as nonlinear metric to assess ECG quality. Firstly to compare performance of discerning randomness and inherent nonlinear properties within time series, this study calculated the aforementioned four nonlinear complexity values on several typical artificial time series i.e., Gauss noise, two kinds of noisy time series, two kinds of Logistic series and periodic series, respectively. Then for analyzing sensitivity of the aforementioned four complexity methods to content level of different types noise within ECG recordings, we investigated variation trend of ELZC, ApEn, SmpEn and PerEn in several synthetic ECG recordings containing different types noise (i.e., baseline wander, muscle artefacts, electrode motion, power line and mixed noise) and different signal noise ratios (i.e., 15, 10, 5, 0, −5 and −10 dB). Finally, the four complexity methods were employed to classify the quality of real ECG recordings from the PhysioNet/Computing in Cardiology Challenge 2011 (CINC 2011) of the MIT databases, then receiver operating characteristic curves (ROC) and their corresponding area under curve (AUC) were yielded. The results showed ELZC could not only distinguish randomness and chaotic within time series but also reflect content level of noise within time series, and the highest AUC of PerEn, ELZC, SmpEn and ApEn were 0.850, 0.695, 0.474 and 0.461, respectively. The results demonstrated PerEn and ELZC were more effectively than ApEn and SmpEn for assessing ECG quality.

Data relating to the rate at which pesticide active substances dissipate on or within various plant matrices are important for a range of different risk assessments; however, despite the importance of this data, dissipation rates are not included in the most common online data resources. Databases have been collated in the past, but these tend not to be maintained or regularly updated. The purpose of the exercise described herein was to collate a new database in a format compatible with the main online pesticide database resource (the Pesticide Properties Database, PPDB), to validate this database in line with the Pesticide Properties Database protocols and thus ensure that the data is maintained and updated in future. Data was collated using a systematic review approach using several scientific databases. Collated literature was subjected to a quality assessment, and then data was extracted into an MS Excel spreadsheet. The outcome of the study is a database based on data collated from 1390 published articles covering over 400 pesticides and over 200 crops across a wide variety of different matrices (leaves, fruits, seeds etc.) for pesticide residues on the crop surface, as well as residues absorbed within the plant material. This data is now fully incorporated into the PPDB.

The oil and gas sector has recognised structural integrity assessment of ageing platform for prospective life extension as a rising concern, particularly in encountering the randomness of the harsh ocean environments. This condition leads to uncertainty in wave-in-deck load estimates and a high load level being imposed on offshore structures. This emphasises the necessity of enhanced reliability, as failure might result in inaccessibility because of the uncertainties related to long-distance services, such as accuracy of predictions of loads and responses. Even though the established guidelines present a fundamental assessment, additionally, comprehensive rules are required. This paper performed a reliability analysis incorporating practical approaches that can more accurately represent time-dependent structural deterioration. The following two procedures have been adopted by a majority of significant oil and gas operators to monitor the safety and integrity of these structures: a) Ultimate Strength Assessment (USA) method and b) Reliability Design Assessment (ReDA) method. A comparison of these two reliability approaches was performed on selected ageing jacket structures in the region of the Malaysian sea. The comparative findings, namely, reserve strength ratio (RSR) at various years of the return period (RP) and ratio value for risk of failure regarding the probability of failure (POF), provided a check and balance in strengthening confidence in the results. The findings showed that the structural components might safely survive either using the USA and ReDA method in such conditions, as the reliability indexes were determined to be satisfactory compared to allowable values from ISO 19902 design specifications. Therefore, these evaluations were determined to control the risk level of the structure during the remaining of its lifetime and undertake cost-effective inspections or mitigation strategies when necessary.

Earthquake is among the most devastating natural disasters causing severe economic, environmental, and social destruction. Earthquake safety assessment and building hazard monitoring can highly contribute to urban sustainable development through identification and insight into optimum materials and structures. While the vulnerability of structures mainly depends on the structural resistance, the safety assessment of buildings can be highly challenging. In this paper, we consider Rapid Visual Screening (RVS) method which is a qualitative procedure for estimating structural scores for buildings suitable for medium- to high-seismic cases. This paper presents an overview of the common RVS methods, i.e., FEMA P-154, IITK-GGSDMA, and EMPI. To examine the accuracy and validation, a practical comparison is performed between their assessment and observed damage of reinforced concrete buildings from a street survey in the Bingöl region, Turkey, after the 11 May 2003 earthquake. The results demonstrate that the application of RVS methods for preliminary damage estimation is a vital tool. Furthermore, the comparative analysis showed that FEMA P-154 creates an assessment that overestimates damage states and is not economically viable while EMPI and IITK-GGSDMA provide for more accurate and practical estimation, respectively.

SStatistical characteristics of the wind speed in Samaria region of Israel have been analyzed by processing 11 years of wind data provided by the Israeli Meteorological Service, recorded at 10 m height above the ground. The cumulative mean wind speed at measurement height was shown to be 4.53 m/s with standard deviation of 2.32 m/s. Prevailing wind direction is shown to be char-acterized by cumulative mean azimuth of 226° with standard deviation of 79.76°. The results were extrapolated to 70-meter height in order to estimate wind characteristics at hub height of a me-dium-scale wind turbine. Moreover, Weibull distribution parameters were calculated annually, monthly and seasonally, demonstrating a good match with histogram-based statistical repre-sentations. Shape parameter of the Weibull distribution was shown to reside within a narrow range of 1.93 to 2.15, allowing us to assume a Rayleigh distribution, thus simplifying wind tur-bines energy yield calculations. The novelty of the current paper is related to gathering wind statistics for a certain area (Samaria) we are not aware of any published statistics regarding wind velocity and direction in this area. The data may be interesting for potential regional wind energy development in which the obtained Weibull distribution can be used in calculations of expected power generation of particular turbines with known power dependence on velocity. We also point out that the fact that realistic wind velocity statistics is well described by an analytic formula (Weibull distribution) is not trivial, and in fact the fit may have been poor.

Housing is always crucial for the sustainable development of communities, specifically in urban areas, due to the population density of cities. The present study constructs its own structure on the basis of the recent papers investigating various sustainability factors for the urban housing sector. By doing a comprehensive systematic literature review, one of the most extensive lists of urban housing sustainability factors is gathered from 118 recent related papers. The factors are prioritized by their frequency of investigation and categorized by their scale(s) and sector(s) of influence. According to the results, the top three significant factors affecting urban housing sustainability are “natural resource or energy consumption/efficiency of the building/equipment (during the construction, operation, etc.)”, “materials performance (durability, cost, thermal capacity, permeability, ability to re-use, recycled, eco-friendly materials)”, and “access to public services/infrastructure: availability/quality of services and/or distance/time of travel time to the services (public transport, education/health/shopping/leisure facilities, parks, etc.)”. By analyzing the results with an integrative approach, it is understood that environmental factors are the most considered ones (more considered than the factors with influence on all sustainability sectors) where institutional factors received the least attention. Also, the most significant measures are the ones that have impacts on both ‘building’ and ‘neighborhood/community’ scales. It should be noticed that the neighborhood/community scale indicators are seen, almost, as important as the measures that affect the building itself. The results of this study can be helpful in establishing future housing-related policies, and also in having more efficient housing sustainability assessment tools.

Background: This study aims to set out key clinical features of different Motoric Cognitive Risk (MCR) subtypes based on individual quantitative measures of cognitive impairment and to compare their predictive power on survival over an 8-year observation time. Methods: We analyzed data from a population-based study of 1138 subjects aged 65 years and older in south Italy. These individuals were targeted and allocated to subtypes of the MCR phenotype according to the slowness criterion plus one other different cognitive domain for each characterized phenotype. Clinical evaluation and laboratory assays, along with a comprehensive battery of neuropsychological and physical tests, completed the sample investigation. Results: MCR prevalence was found to be 9.8% (N=112), 3.6% (N=41), 3.4% (N=39), and 1.8% (N=21) for the MCR, MCR-GlobalFunction, MCR-StructuredSCC, and MCR-SCC&amp;GlobalFunction, respectively. Univariate Cox survival analysis showed an association only of the MCR-GlobalFunction subtype with a significant, 1.5-fold increased risk of overall death as compared to the other counterparts (HR 2.53, 95%CI 1.28 to 4.99, P-value&lt;0.01) over an 8-year observation period, even after major adjustment (HR 2.02, 95%CI 1.02 to 4.02). Conclusions: MCR phenotypes assigned to the MMSE cognitive domain are more likely to have an increased risk of overall mortality, 1.5-fold higher than counterparts, over 8-year observation.

The article presents an original method to assess the sustainability of concrete. The method uses three parameters, namely: performance, lifetime and environmental impact, to calculate a sustainability index. The originality and the simplicity of the proposed method presented in the article consists in the fact that by applying the relation to determine the sustainability index, the first two factors service life and performance are constant. This approach is possible in the context of the new proposals to specify the durability of structural concrete in EN 1992 and EN 206. That allows classification of concrete according to its performance, through Environmental action Resistance Classes (ERC). For this purpose, specific experimental methods were used in order to determine the performance of concrete exposed to carbonation. The concretes were prepared with two cement types with additions (CEM II / A-S and CEM II / A-M (S-LL)). Based on the carbonation resistance classes (the first constant - the performance) and exposure classes, the thickness of the concrete cover layer was determined to ensure a certain service lifetime (second constant - the service lifetime). Finally, the global warming potential was calculated for each composition, consequently allowing the users of the method, to select the compositions with the lowest impact on the environment.

This article presents a method to assess the sustainability of concrete based on three elements: service life, performance and environmental impact. The method proposes - to achieve similar performance and service life times, regardless of the component materials used, so that the sustainability assessment ultimately depends on the environmental impact criterion. To this end, specific experimental methods are used to determine the performance of concrete in terms of compressive strength and carbonation resistance for concrete cast with two blended cement types. The procedure needed to classify the concrete through carbonation resistance is detailed, in relationship with the performance obtained for compressive strength. The obtained results highlight the concrete formulations to be used to ensure similar performances regardless of the cement type used. In conclusion, the simplicity in the application of the method, which is closely related to the performance approach on concrete durability in the revision proposals of the European standards, is highlighted. The method is also a useful tool to encourage the widespread use in concrete formulation of blended cements with low environmental impact, without reducing the performance or service life time of the constructions.

The study focused on investigating the natural incidence of deoxynivalenol (DON) in corn and products from corn producing districts of Punjab, Pakistan. The analysis was carried out using HPLC with UV detector and immunoaffinity cleanup columns. The detection limit (LOD) and limit of quantification were 25 and 50 µg/kg, respectively. Total 1220 samples of corn and products were analyzed to detect the DON, and 539 (44.2%) samples were observed to be contaminated with DON (n ≥ LOD). Furthermore, 92 (7.5%) samples of corn & products have DON levels, elevated than the proposed limits of the EU. The data is significantly different from a normal distribution for DON in corn and products samples and from different locations (p < 0.05) for Shapiro-Wilk and Kolmogorov-Smirnov values. However, a significant difference in DON levels was found between corn and corn derived-products types (p ≤ 0.05). The lowest and highest exposure & hazard quotient (HQ) of 0.92 and 9.68 µg/kg bw/d were documented in cornflour samples.

In recent years, farmers and policymakers have faced ample challenges and have struggled to support the sustainability of the agricultural sector. Sustainable agriculture encompasses multiple concepts, and its performance produces extensive debate about data requirements, appropriate indicators, evaluation methods, and tools. Under the European Union (EU) financed project FLINT (Farm Level Indicators for New Topics in policy evaluation), detailed data have been collected at the farm level to provide broader coverage of sustainability indicators on a wide range of relevant topics to facilitate the assessment of sustainability performance. The approach has been applied in a pilot network of representative farms at the EU level, considering the heterogeneity of the EU farming sector to provide data infrastructure with up to date information for sustainability indicators. This study aims to assess sustainability performance at the farm level in Greece. Representative and dominant agricultural systems, such as permanent crops, olive trees, arable crops, and livestock (sheep) farms, comprise the Greek sample. It uses the analytical hierarchy process (AHP) methodology and attempts to gain insights into the sustainability performance of agricultural systems. The outcome of the sustainability assessment reveals knowledge and develops support for strategic farm choices in order to support both farmers and policymakers towards more sustainable development plans. The results indicate that three typical Mediterranean farming systems, like permanent crops, olive trees, and extensive livestock systems (sheep farms), are more sustainable in contrast to intensive and arable crop farms.

Background and objective: Addressing the global morbidity associated with pulmonary disease is an important need for the respiratory community. However, there is also a growing momentum to show the efficacy of new tools of diagnosis. Despite this, there are few physiotherapeutic tools that help identify and categorize these conditions. The aim was to analyze the variables of physiotherapy index of the ventilatory workload (PIVW) in people with chronic obstructive pulmonary disease (COPD) during stability and exacerbation in an outpatient setting. Material and Methods: Analyzed retrospectively of 198 clinical records were reviewed. The PIVW was extracted in stability and exacerbation of these patients with COPD. After applying the exclusion and inclusion criteria; 54 patients were classified. Through the statistical analysis of chi-square, a significant association was reported for each of the variables and the total PIVW score. Results: when analyzing the baseline with the peak of PIVW, there was a significant increase in patients COPD exacerbation. Similarly, the variables that constitute the loads, translations and supports underwent a significant increase from baseline to exacerbation (p<0.0001), except for the additional oxygen contribution, where the frequency of patients was the same in basal and exacerbation as well. Conclusions: the PIVW, serves to determine ventilatory problemas in outpatients, characterizing the specific changes of loads, translators or assistance.

The analysis of the morphological features can be framed in different temporal and spatial scales, depending on the specific objectives and methodologies of the various scientific fields that find in them a valuable source of information. The inventory and assessment of the geomorphological heritage may be based not exclusively in geophysical factors, but also in its contribution to the structuring of the biosphere, in its interrelation with other types of heritage or even in its potential for research or education purposes. In this article, we proceeded to the selection of a set of geomorphosites, at different scales, in Serra do Alvão (northern Portugal), seeking to demonstrate the importance of the broad lines of relief and intermediate and detailed landforms to the organization of the cultural landscape. Based on a questionnaire applied to a sample of 104 persons, it was intended to assess the value of the geomorphosites, concerning the scientific, preservation, use, cultural and educational dimensions.

Achieving water security and availability for all is among the principle agenda of the UN-Sustainable Development Goals. To achieve the goal of water security, particularly in rapidly expanding cities, identification of safe and sustainable water resources is an absolute necessity. The paper conducts an exploratory investigation in the hydro geochemical characteristics of groundwater and thereby, assess the suitability of groundwater as an alternative and reliable resource for public water supply in the Indian city of Surat. A total of 33-groundwater samples, selected on the basis of aquifer depth, land use signatures, were collected from open, bore, dug wells and hand pumps. After the hydrogeochemical analysis, the study evaluated the present state of the groundwater quality and determined the spatial distribution of groundwater quality parameters such as hardness, electrical conductivity, Cl −, pH, SO42-, and NO3 − concentrations. An interpolation technique, known as ordinary kriging, was used to acquire the spatial distribution of parameters of groundwater quality parameters. Based on the permeability index, result showed that 80% of the sampled groundwater quality falls under excellent class i.e. category I with PI value ranging from 1-24%, whereas the rest 20% of the samples has fallen under good class i.e. category II with PI value ranging from 25 to 75% on the suitability of water for irrigation. The results of this study outlines the unsustainability of groundwater for direct consumption, especially without any improved onsite water treatment, but it is appropriate for the irrigation purposes.

The management of existing water distribution system (WDS) is challenged by ageing of infrastructure, population growth, increasing of urbanization, climate change impacts and environmental pollution. Therefore, there is a need for integrated solutions that support decision makers to plan today, while taking into account the effect of these factors in the mid and long term. The paper is part of a more comprehensive project, where advanced hydraulic analysis for WDS is coupled with a dynamic resources input-output analysis model. The proposed modeling solution can be used to optimize the performance of a water supply system while considering also the energy consumption and consequently the environmental impacts. Therefore, as a support tool in the management of a water supply system also in the intervention planning. Here a possible application is presented for rehabilitation/replacement planning while maximizing the network mechanical reliability and minimizing risk of unsupplied demand and pressure deficit, under given economic constraints.

The development of reliable Food Frequency Questionnaires (FFQs) requires detailed information about the level and variation of dietary food intake of the target population. However, these data are often limited. To facilitate the development of new high quality FFQs and validation of existing FFQs, we developed a comprehensive National Dietary Assessment Reference Database (NDARD) detailing information about the level and variation in dietary food intake of people 20-70 years old in the general Dutch population. This paper describes the methods and characteristics of the population included in the NDARD database. 1063 men and 985 women agreed to participate in this research. Dietary intake data were collected using different FFQs, web-based and telephone-based 24-hour recalls, as well as blood and urine-based biomarkers. The baseline FFQ was completed by 1647 participants whose mean BMI was 26±4 kg/m2; 1117 participants completed telephone-based recalls and 1781 participants completed web-based recalls. According to the baseline FFQ, the mean energy intake was 2051±605 kcal/day. The percentage of total energy intake from protein was 15±2 En%, from carbohydrates was 43±6 En%, and from fat was 36±5 En%. This database will enable researchers to validate existing FFQs and to develop new high quality dietary assessment methods.

In the Netherlands, the assessment of existing prestressed concrete slab-between-girder bridges showed that the thin, transversely prestressed slabs may be critical for static and fatigue punching when evaluated using the recently introduced Eurocodes. On the other hand, compressive membrane action increases the capacity of these slabs and changes the failure mode from bending to punching shear. To improve the assessment of the existing prestressed slab-between-girder bridges in the Netherlands, two 1:2 scale models of an existing bridge, the Van Brienenoord Bridge, were built in the laboratory and tested monotonically as well as under cycles of loading. The result of these experiments is: 1) the static strength of the decks, showing that compressive membrane action significantly enhances the punching capacity, and 2) the Wöhler curve of the decks, showing that compressive membrane action remains under fatigue loading. The experimental results can then be used for the assessment of the most critical existing slab-between-girder bridge. The outcome is that the bridge has sufficient punching capacity for static and fatigue loads, and thus that the existing slab-between-girder bridges in the Netherlands fulfil the code requirements for static and fatigue punching.

In this paper, we have investigated the impact of an early learning assessment on students' motivation for improving their performance throughout the semester. An observation analysis was conducted on an entry level mechanical engineering course in which students are enrolled in during their first semester of engineering work. This study analyzes the effect that a first exam, with an average below a passing grade, has on student's outcome in the course. It was hypothesized that students were motivated to achieve their desired grade outcomes following inadequate performance on the first exam. This was investigated by diving into the results of the course and referencing initial performance to the remaining exam and assessment outcomes. Students were placed into grade bands ranging from 0 to 100 in 20% increments. Their results were tracked and it was shown that for the second mechanics exam, averages jumped 43.333%, 35.35%, and 30.055% for grade bands of 0 to 20, 20 to 40, and 40 to 60 respectively. Assessment grades increased as well with the remaining assessments being averaged to a score of 91.095%. Variables contributing to student performance came from both with-in and outside the classroom. Learning communities, material differentiation, and student and professor adaptation all contributed to the rise in performance. It was concluded that the internal and external variables acted in combination with one another to increase student dedication to achieve success.

Despite laws and directives for the regulation and restriction of pesticide in farming, the large use of Plant Protection Products (PPPs) in paddy fields is a relevant worldwide cause of contamination of the environment. The aim of this work is to evaluate the environmental impact due to the use of PPPs by using an integrated approach based on chemical analyses and ecotoxicological hazard assessment, supported by statistical tools, in order to overcome the issues related to the traditional tabular evaluation. Samples of soil and water of seven conventional and organic paddies located in Northern Italy have been examined for two years by extensive chemical and ecotoxicological analyses. The results evidenced a direct relationship between the presence of Oxadiazon in water and bioassays responses as the main cause of the toxicity measured. This phenomenon affected both biological and conventional rice fields, due to the free circulation of water through irrigation canals. Therefore, the implementation of organic districts with a water circulation isolated from conventional fields represents a simple and effective countermeasure to safeguard the agricultural practices of organic crops.

The COVID-19 pandemic has highlighted the vitalness of telehealth in our medical world, where considering a restructuring of healthcare services has become paramount. In fact, telemedicine has recently earned a valuable place in many specialties; and its implications in cardiology and cardiovascular medicine were among the leading interests. In this letter, we gathered previous evidence supporting the merit of telemedicine in the fields of cardiology and cardiovascular medicine—medical branches in which patients require meticulous care and continuous monitoring—as well as protrusions of concerns about the uncertainty regarding the efficacy of telemedicine’s future implications and technologies. In sum, in the context of this still on-going pandemic, medical institutions must strive to improve telehealth technologies and implement solid future research directions in this growing field—to be able to persevere in meeting the needs of the patients. As long as no conclusive evidence exists regarding the fields where telemedicine is most worthwhile, healthcare systems will always keep the dread of wasting resources on developing ineffective programs. We conclude that telemedicine has been attributed a considerable attention in managing cardiac and cardiovascular conditions; nevertheless, further studies with solid designs are still needed to confirm its validity and utility in those specialties.

The present paper deals with the investigation, at conceptual level, of the performance of short-medium-range aircraft with hydrogen propulsion. The attention is focused on the relationship between figures of merit related to transport capability, such as passenger capacity and flight range, and the parameters which drive the design of liquid hydrogen tanks and their integration with a given aircraft geometry. The reference aircraft chosen for such purpose is a box-wing short-medium-range airplane, object of study within a previous European research project called PARSIFAL, capable to cut the fuel consumption per passenger-kilometre up to 22%. By adopting a retrofitting approach, non-integral pressure vessels are sized to fit into the fuselage of the reference aircraft, under the assumption that the main aerodynamic, flight mechanic and structural characteristics are not affected. A parametric model is introduced to generate a wide variety of fuselage-tank cross-section layouts, from a single tank with the maximum diameter compatible with a catwalk corridor to multiple tanks located in the cargo deck , and an assessment work-flow is implemented to perform the structural sizing of the tanks and analyse their thermodynamic behaviour during the mission. This latter is simulated with a time-marching approach that couples the fuel request from engines with the thermodynamics of the hydrogen in the tanks, which is constantly subject to evaporation and, depending on the internal pressure, vent-ed-out in gas form. Each model is presented in detail in the paper and results are provided through sensitivity analyses to both the technology parameters of the tanks and the geometric parameters influencing their integration. The guidelines resulting from the analyses indicate that light materials, such as the Aluminium alloy AA2219 for tanks’ structure and polystyrene foam for the insulation, should be selected. Preferred values are also indicted for the aspect ratios of the vessel components, i.e. central tube and endcaps, as well as suggestions for the integration layout to be adopted depending on the desired trade-off between passenger capacity, as for the case of multiple tanks in the cargo deck, and achievable flight ranges, as for the single tank in the section.

The present study was conducted to estimate the exposure and risk characterization of the children population of Serbia to Aflatoxin M1 (AFM1) from milk and milk-based food. A total of 3404 samples comprising of milk and different milk-based food samples were collected from various regions of Serbia from 2017 to 2019. Evaluation of the AFM1 exposure was carried out using the deterministic method, whereas risk characterization was evaluated with the calculation of the Margin of Exposure (MOE) and the risk of Hepatocellular Carcinoma (HCC). Detection rates for AFM1 in milk and milk-based food samples ranged between 2% and 79%, with the highest incidence (79%) and mean level (22.34  0,018 ng kg-1) of AFM1 was detected in pasteurized and UHT milk. According to the three consumption estimates, the values of EDI were higher for toddlers as compared with children. Children aged 1–3 years had the highest risk of exposure to AFM1 in milk, with an estimated daily intake of 0.164 and 0.193 ng kg-1 bw day-1 using a lower bound (LB) and the upper bound (UB) exposure scenarios, respectively. Such difference could result from the higher consumption versus weight. Based on the EDI found in this study, the risk of AFM1 due to consumption of milk and milk-based food was low since MOE values obtained were 10000. In addition, the risk of HCC cases/year/105 individuals of different age groups showed that the value of HCC using potency estimates of 0.0017 (mean) was maximum (0.00034) in the age group 1–3 years which indicates no health risk for the evaluated groups. The present study revealed the importance of controlling and preventing AFM1 contamination in milk through continuous monitoring and regular inspection to reduce the risk of AFM1 exposure, especially in children.

The global trend towards increased demand for organic food, greener environments, and the integration of biological control agents into pest management strategies has greatly enhanced the need for biological pesticides (biopesticides). Biopesticides are generally environmentally friendly and are made from micro-organisms or other natural substances. Despite their great potential, relatively few have been registered and commercialised in Nigeria compared to other African countries such as South Africa and Kenya. Biological active agents are so diverse such that ap-plying the same safety standards or environmental conditions to all of them is almost impossible. A review of risk assessment processes and comparative assessments of Nigeria's biopesticide regulations with other developing African countries and developed regions was conducted. Prolonged field testing, lack of bridged risk assessments and technical checklists have been identified as key factors hampering the timely development and commercialisation of biopesti-cides in Nigeria. Recommendations on necessary changes to the existing Nigeria biopesticide regulations have been made. Risk assessment matrices for microbial and biochemical biopesti-cides and a scientific/technical checklist have also been developed. Harmonisation and data ex-change among other countries in the region will also enhance the advancement of scientific and technical knowledge for sustainable regulation and cross-border trade.

Tinnitus is a phantom sound perception in the ears or head and can arise from many different medical disorders. Currently, there is no standard treatment for tinnitus that reliably reduces tinnitus. Individual patients reported that acupressure at various points around the ear can help to reduce tinnitus, which was investigated here. With this longitudinal observational study, we report a systematic evaluation of auricular acupressure on 39 tinnitus sufferers, combined with a self-help smartphone app. The participants were asked to report about tinnitus, stress, mood, neck and jaw muscle tensions twice a day using an ecological momentary assessment study design for six weeks. On average, 123.6 questionnaires per person were provided and used for statistical analysis. The treatment responses of the participants were heterogeneous. On average, we ob-served significant negative trends for tinnitus loudness (Cohen’s d effect size: -.861), tinnitus dis-tress (d = -.478), stress (d = -.675), and tensions in the neck muscles (d = -.356). Comparison with a matched control group revealed significant improvements for tinnitus loudness (p = .027) and self-reported stress level (p = .003). The positive results of the observational study motivate fur-ther research including a randomized clinical trial and long-term assessment of the clinical im-provement.

Female sexual functioning and satisfaction are impaired by the presence of sexual difficulties. Current study aims to analyze the differences on sexual satisfaction in women according to types of sexual problems (absence of sexual problems, self-perceived and assessed by the FSFI cut-off). A total of 329 women answered to a specific question about presence of self-perceived sexual problems, the Sexual Satisfaction Scale for Women, and the Female Sexual Functioning Index. Main findings revealed that sexually health women had better levels of sexual satisfaction when compared to women who self-report sexual difficulties and women who scored clinical levels in FSFI. Also, women who scored clinical levels in FSFI scored lower on sexual satisfaction compared to women who self-report sexual difficulties. Female sexual satisfaction was negatively affected by sexual difficulties assessed according to the FSFI cut-off. Although with lower impact, self-perceived sexual problems also affect negatively sexual satisfaction in women.

Body-Esteem Scale is an assessment tool for adolescents and adults that evaluate three dimensions of self-evaluations of one’s body. Body-Esteem Scale has been translated and validated in some countries since America down to Europe. Lack of translation and reliability evidence in Portugal was detected. This study aimed to translate and test the validity and reliability of the Body Esteem Scale for Adolescents and Adults (BESAA) in students in the context of Portuguese higher educa-tion. A total of 173 students (60.7% are female) with a mean age of 19.7 (standard deviation = 2.2) years participated. Categorical Principal Component Analysis was used to assess the underlying dimensions of BESAA. Construct validity was evaluated through correlation with the Appearance Schemas Inventory – Revised and a three-factor model (“Appearance”, ‘‘Weight’’ and “Attribu-tion’’) was established. Confirmatory factor analysis was performed to verify the construct validity of the instrument. Items that had factor weights (λ)<.40 were removed, as well as those that were considered redundant by the modification indices estimated by the Lagrange Multipliers (LM) method (LM>11, p<.001). We observed high correlations between theoretically similar factors, and low correlations between different factors. The Portuguese BESAA showed adequate validity and reliability.

BACKGROUND: To present a new method of urethral pressures examination, and to evaluate diagnostic capabilities of three dimensional profilometry , as an alternative to classical urethral profile (UPP) .Using four channel catheters and dedicated software global urethral pressures image is obtained. The method eliminates the main limitation of classical urethral profilometry where the catheter orientation determines the pressures picture limited to only one point in the uretral circumference while we observed even 50% differences in pressure measures depending on the point of measurement. METHODS: This is a preliminary study containing method presentation and analisys of the use in varied clinical cases of either healthy patients and patients with LUTS. The article includes technique and equipment decription, full evaluation of selected cases, including three dimensional urethral pressures distribution graphics. RESULTS AND CONCLUSIONS:Three dimensional profilometry compared to classical technique is comparable regarding the time, cost, technical difficulty and patient discomfort. At the same time we obtain much more data on the urethral pressures and its distribution.The results are easy for interpretation due to 3D movable graphics created automatically through the dedicated software.

In public health literature the risk of death or disease associated with a dietary, environmental of behavioral factor is most commonly denoted by odds ratio (OR), hazard ratio (HR) or risk ratio (RR). The ratio indices have several desirable statistical properties. However, the most important question is whether there are some evolved innate norms of perception of risk that people use and what they are. We conducted a simple one question survey of 98 individuals with different age, sex, educational and professional backgrounds. The respondents were asked to judge the relative perceived risk of four different hypothetical habits for which data on the percentage of people affected by the disease with and without the habit was given. They were asked to rank the risks for the four habits. Results showed that the habits that had the highest difference between probability of acquiring the disease were ranked high on risk perception. The probability ratios did not affect risk perception significantly. Further age, sex, profession or formal training in statistics did not affect the response significantly. Even individuals that were formally trained to use OR and HR as risk indicators, preferred using probability differences over ratios for judging their own risk in the perceived context. This preliminary inquiry into intuitive statistical perception suggests that designing statistical indices based on people’s innate perception may be a better strategy than trying to train people to understand the indices designed by expert statisticians.

Currently there is no multi-hazard risk assessment tool for determining the level of complexity to swiftwater and flood rescue incidents. Traditionally, the International Scale of River Difficulty is used but it is primarily for paddlers for use in a recreational context, without much consideration to the multitude of hazards faced in swiftwater and flood rescue environments. In response to this gap, the ECHO risk assessment tool has been developed and undergone initial testing. This tool provides for simple and rapid codification of multiple hazards and response considerations and is globally applicable. The tool also assigns a final risk assessment colour making the interpretation of the assessment easy to understand and communicate. Though the proposed tool shows potential, further research is needed before it should be operationalised.

Agricultural intensification is considered essential for meeting growing demand for food and biomass for energy and material purposes. Intensifying grasslands is a so-far under-represented although promising option, given their large land area and relatively low management levels. This study quantifies the bioenergy potential from intensifying temporary grasslands in Europe and the integral greenhouse gas emission effects in 2030. We first conduct a literature review of intensification options for European grasslands and then apply the environmental impact assessment model MITERRA-Europe to implement the key intensification option of using multi-species grass mixtures. The results show that 853 kha (or 8%) of temporary grassland could be made sustainably available for additional biomass production. This can be translated into a bioethanol potential of 23 PJ/yr and an emission mitigation potential of 5.8 Mt CO2-eq/yr (if conventional grass mixture from surplus temporary grassland is used for energy) or 72 PJ/yr and 4.0 Mt CO2-eq/yr (if surplus temporary grassland is used for grassy energy crops). Although the bioenergy potential is limited, the intensification measure’s key advantage is that it results in a better environmental performance of temporary grasslands. This makes it a key option for sustainably producing bioenergy in areas with high shares of temporary grasslands.

The Matāura River is the sixth largest river system in New Zealand and has long been subject to agricultural, industrial, and residential land use activities. The catchment has geographic and economic value and is of great cultural importance for local Māori, who have concerns over potential adverse impacts that anthropogenic stressors exert on the health of the river. There is a dearth of information on the impacts of these stressors towards the health of native species such as the longfin eel Anguilla dieffenbachii. This study assessed the environmental status of the Matāura River using biological and chemical methodologies incorporating A. dieffenbachii as a bioindicator species for exposure to combined anthroprogenic stressors. A range of biomarker endpoints were measured in caged and wild-caught eels (when available) to characterize site-specific responses to combined anthropogenic stressors. While there was no clear indication of cumulative impacts moving from pristine headwaters to the lower reaches of the Matāura River biomarkers of xenobiotic metabolization were induced in A. dieffenbachia and there was evidence of chemical contamination in sediments and tissues.

Investments in digital infrastructure in marginalised communities are set to increase in the next decade. These are premised on the potential of digital technologies to contribute towards solving societal problems, including the fragility of food value chains in rural areas. Although there are mixed empirical findings on the impact of these digital infrastructure investments, huge investments are continuing amid changing ICT policies in most developing countries. This paper, using a case study of a local livestock value chain in a rural community in Zimbabwe, argues for the application of non-conventional approaches towards digital infrastructure transformation impact assessment. Using selected theories and frameworks (socio-ecological systems framework, choice framework and technology affordances theory) as well as empirical data from a project in a rural community, the paper shows that real-time impact assessment using context-specific metrics may reveal hidden digital infrastructure transformation impacts, positive and negative, that are often overlooked when traditional impact assessment approaches are employed. The findings of this study contribute towards improving approaches towards ICT impact assessment. Practitioners engaging in impact assessment are challenged to move beyond dependence on traditional metrics (e.g. access) to the adoption of participatory processes to decipher context-appropriate metrics.

The importance of the contribution from tourism to climate change was pointed out by the International Tourism Organization (UNWTO). By combining process-based Life Cycle Assessment (LCA) and Input-output analysis, several researches have tried to evaluate the impacts of the tourism industry as well as its products and services. Indeed, the tourism sector has a wide range of industries including travel and tour, transportation, accommodation, food and beverage, amusement, souvenirs etc. However, the existing cases did not show a breakdown of the impact on climate change. In this paper, the carbon footprint (CFP) of the Japanese tourism industry was calculated based on tourist consumption, using the Japanese Input-output table and the Japanese tourism industry. It was shown that the total emissions were approximately 136 million t-CO2 per year. The contribution ratio of each stage is as follows: Transport 56.3%, Souvenirs 23.2%, Petrol (direct emissions) 16.9%, Accommodation 9.8%, Food and Beverage 7.5%, Activities 3.0%. Then, in the breakdown, the impact is high in the following order Air transport 24.7%, Petrol (direct emissions) 16.9%,Accommodation 9.8%, Food and Beverage 7.5%, Petrol 6.1%, Textile products 5.3%, Food items 4.9%, Confectionery 4.8%, Rail transport 3.9%, Cosmetics 1.9%, Footwear 1.8%, etc. In addition to transportation, this research also highlighted especially the contribution from souvenirs, accommodation, food and beverages.

The complex systems that require safety are the Safety Critical Systems. Maintaining these systems is a big challenge. Now a days, safety is a very critical requirement for the latest systems. Safety critical systems must be safe. Different approaches to ensure quality and safety in safety critical systems has been discussed in this paper. A comparison is also conducted between these various approaches. Safety critical systems must remain more influential in future.

The study of the distribution and health risk assessment is meaningful to provide basic data for environmental management．To investigate the pollution of potential toxic organics and their health risk to human beings, water samples were collected at 7 sites of main surface water of Beijing during wet and dry seasons respectively. The targeted 92 organics were detected, including phthalates (PAEs), volatile organic compounds (VOCs), polycyclic aromatic hydrocarbons (PAHs) and phenols. The results showed that: there were 56 organics detected out, and the number ratios of detected compounds to the total compounds of the same kind increased as the following: VOCs, phthalates, phenols, PAHs. 8 VOCs were detected in wet season, and 3 in dry season. The concentration of 2,2-Dichloropropane was highest as 10.62ug/L, while the concentrations of other VOCs were below 5ug/L; There were 11 phthalates detected during dry season. The content of Bis(2-methoxyethyl) phthalate was highest as 188.47ng/L; 17 phenols were found in samples during wet season, and the highest concentration was 1244.73ng/L for 4-nitrophenol; PAHs could be detected in all samples, and the detected compounds and the corresponding average concentrations were higher in wet seasons than those in dry seasons, which indicated that non-point pollution was possibly the main pollution source. The health risk assessment of the detected 56 pollutants by using a model from US EPA showed that, the risk caused by the four kinds of toxic organics in this study was in the acceptable ranges.

Background: Malnutrition is a frequent condition in the elderly and is associated with prolonged hospitalization and increased mortality. However, the impact of malnutrition among elderly patients with acute myocardial infarction has not been clarified yet. Methods and Results: We have enrolled 174 patients aged 65 years and over, admitted with the diagnosis of acute myocardial infarction (AMI) who underwent to the evaluation of nutritional status by Mini Nutritional Assessment (MNA) and of mortality risk by Grace score 2.0. All-cause mortality was the outcome considered for this study. Over a mean follow-up of 24.5 ± 18.2 months, 43 deaths have been registered (24.3%). Non-survivors were more likely to be older, with worse GFR, lower SBP, lower albumin and MNA score, higher prevalence of Killip classification III-IV grade, and higher Troponin I levels. Multivariate Cox proportional analysis revealed that Grace score and MNA showed a significant and independent impact on mortality, (HR = 1.76, 95% CI = 1.34–2.32 and HR = 0.56, 95% CI = 0.42–0.73, respectively). Moreover, the clinical decision curve revealed a higher clinical net benefit when the MNA was included compared to the partial models without MNA. Conclusions: Nutritional status is an independent predictor of long-term mortality among elderly patients with AMI. MNA score in elderly patients with AMI may help prognostic stratification and identification of patients with/at risk of malnutrition in order to apply interventions to improve nutritional status and maybe survival in this population.

The three heat-induced coffee contaminants acrylamide, furfuryl alcohol (FA) and 5-hydroxymethylfurfural (HMF) were analyzed in a collective of commercial samples as well as in Coffea arabica seeds roasted under controlled conditions from very light Scandinavian style to very dark Neapolitan style profiles. Regarding acrylamide, average contents in commercial samples were lower than in a previous study in 2002 (196 compared to 303 µg/kg). The roasting experiment confirmed the inverse relationship between roasting degree and acrylamide content, i.e. the lighter the coffee the higher the acrylamide content. However, FA and HMF were inversely related to acrylamide and found in higher contents in darker roasts. Therefore, mitigation measures must consider all contaminants and not be focused isolatedly on acrylamide, specifically since FA and HMF are contained in much higher contents with lower margins of exposure compared to acrylamide.

Videogames have become educational, communicative and social tools among the youngest, favouring the acquisition of skills, abilities and values, encompassing an endless number of themes, and help to experience and to face, in the first person, a great diversity of environmental situations and ecology problems. Thus, the present article aims: a) the evaluation of a sample of 20 educational videogames about water, making use of some empirical criteria of quality; and b) the design, validation and application of an integrate quality indicator of educational videogames on water, based on the aspects of narrative, gameplay and didactics to that sample, which allows us to obtain a ranking. The findings reflect a ranking of games allows to suggest that the nature of the game (simulation, adventures, platforms or questions) does not determine the quality of the game, although generally simulations and adventure games are placed in a range of medium or high quality, as well as those games that pursue objectives related to the design and management of a territory in a sustainable way. The paper provides teachers with quality criteria based on narrative and gameplay that complement and enriches the pedagogical dimension.

Breakwaters influence coastal wave climate and circulation by blocking and dissipating wave energy. Accurate representation of these effects is essential to the determination of coastal circulation and wave processes. MIKE21SW and SWAN are two third-generation spectral wave models which are used widely in coastal research and engineering applications. Recent improved versions of the models are able to consider the influence of breakwater structures. In this study, we used available observations to evaluate the accuracy of model simulations of waves in New Haven Harbor, Connecticut, USA, an estuary with three detached breakwaters near the mouth. We then compare the accuracy and computational efficiency of MIKE21SW and SWAN. Both models were executed on the same unstructured triangular grid. The boundary conditions were derived from a bottom mounted ADCP on the offshore side of the breakwaters. Wind forcing was applied using data from the Central Long Island Sound buoy. We find that both models are largely consistent with observations during storms. The MIKE21SW significant wave height and wave direction simulations were slightly superior; however, SWAN is more efficient and faster due to its implementation of a fully implicit technique for time integration.

Optoelectronic devices are gold standard for 3D evaluation in clinics but due to the complexity of such kind of hardware and the lack of access for patients affordable, transportable and easy to use systems must be developed to be largely used in daily clinics. The Kinect^TM sensor presents various advantages compared to optoelectronic devices: price, transportability but also some limitations: (in)accuracy of the skeleton detection and tracking as well as the limited amount of available points that make 3D evaluation impossible. To overcome these limitations a novel method has been developed to perform 3D evaluation of the upper limbs. This system is coupled to rehabilitation exercises allowing functional evaluation while performing physical rehabilitation. To validate this new approach a double step method was used. The first step is a laboratory validation where the results obtained with the Kinect^TM have been compared with results obtained with an optoelectronic device, 40 healthy young adults participated in this first part. The second step was to determine the clinical relevance of such kind of measurement. Results of the healthy subjects were compared with a group of 22 elderly adults and a group of 10 chronic stroke patients to determine if different patterns can be observed. The new methodology and the different steps of the validations are presented in this paper.