Hypergravity accelerators are a type of large machinery used for gravity training or medical research. A failure of such large equipment can be a serious problem in terms of safety or costs. This paper proposes a prediction model that can proactively prevent failures that may occur in a hy-pergravity accelerator. The method proposed in this paper was to convert vibration signals to spectograms and perform classification training using a deep learning model. An experiment was conducted to evaluate the performance of the method proposed in this paper. A 4-channel accel-erometer was attached to the bearing housing, which is a rotor, and time-amplitude data were obtained from the measured values by sampling. The data were converted to a two-dimensional spectrogram, and classification training was performed using a deep learning model for four conditions of the equipment: Unbalance, Misalignment, Shaft Rubbing, and Normal. The ex-perimental results showed that the proposed method had a 99.5% F1-Score, which was up to 23% higher than the 76.25% for existing feature-based learning models.

One of the most important challenges in the Machine and Deep Learning areas today is to build good models using small datasets, because sometimes it is not possible to have large ones. Several techniques have been proposed in the literature to address this challenge. This paper aims at studying the different available Deep Learning techniques and performing a thorough experimentation to analyze which technique or combination thereof improves the performance and effectiveness of the models. A complete comparison with classical Machine Learning techniques was carried out, to contrast the results obtained using both techniques when working with small datasets. Thirteen algorithms were implemented and trained using three different small datasets (MNIST, Fashion MNIST, and CIFAR-10). Each experiment was evaluated using a well-established set of metrics (Accuracy, Precision, Recall, F1, and the Matthews correlation coefficient). The experimentation allowed concluding that it is possible to find a technique or combination of them to mitigate a lack of data, but this depends on the nature of the dataset, the amount of data, and the metrics used to evaluate them.

Skin disease is a very common disease for humans. In the medical industry detecting skin disease and recognizing its type is a very challenging task. Due to the complexity of human skin texture and the visual closeness effect of the diseases, sometimes it is really difficult to detect the exact type. Therefore, it is necessary to detect and recognize the skin disease at its very first observation. In today's era, artificial intelligence (AI) is rapidly growing in medical fields. Different machine learning (ML) and deep learning(DL) algorithms are used for diagnostic purposes. These methods drastically improve the diagnosis process and also speed up the process. In this paper, a brief comparison between the machine learning process and the deep learning process was discussed. In both processes, three different and popular algorithms are used. For the machine Learning process Bagged Tree Ensemble, K-Nearest Neighbor (KNN), and Support Vector Machine(SVM) algorithms were used. For the deep learning process three pre-trained deep neural network models

The advancement of precision medicine in medical care has led behind the conventional symptom-driven treatment process by allowing early risk prediction of disease through improved diagnostics and customization of more effective treatments. It is necessary to scrutinize overall patient data alongside broad factors to observe and differentiate between ill and relatively healthy people to take the most appropriate path toward precision medicine, resulting in an improved vision of biological indicators that can signal health changes. Precision and genomic medicine combined with artificial intelligence have the potential to improve patient healthcare. Patients with less common therapeutic responses or unique healthcare demands are using genomic medicine technologies. AI provides insights through advanced computation and inference, enabling the system to reason and learn while enhancing physician decision-making. Many cell characteristics, including gene up-regulation, proteins binding to nucleic acids, and splicing, can be measured at high throughput and used as training objectives for predictive models. Researchers can create a new era of effective genomic medicine with the improved availability of a broad range of data sets and modern computer techniques such as machine learning. This review article has elucidated the contributions of ML algorithms in precision and genome medicine.

Machine Learning has completely transformed health care system, which transmits medical data through IOT sensors. So it is very important to encrypt them to protect patient data. encrypting medical images from a performance perspective consumes time; hence the use of an auto encoder is essential. An auto encoder is used in this work to compress the image as a vector prior to the encryption process. The digital image passes across description function and a decoder to get back the image in the proposed work; various experiments are carried out on hyper parameters to achieve the highest outcome of the classification. The findings demonstrate that the combination of Mean Square Logarithmic Error as the loss function, ADA grad as an optimizer, two layers for the encoder, and another reverse for the decoder, RELU as the activation function generates the best auto encoder results. The combination of Mean square error (lose function), RMS prop (optimizer), three layers for the encoder and another reverse for the decoder, and RELU (activation function) has the best classification result. All the experiments with different hyper parameter has run almost very close to each other even when changing the number of layers. The running time is between 9 and 16 second for each epoch.

Today, specific CNN models assigned to specific tasks are often used. In this article, the authors have investigated three models MobileNet, EfficientNetB0 and InceptionV3. Artificial intelligence methods for deep networks will be presented but implemented in a limited computer resource. Three types of training bases were investigated, starting with a simple base verifying five colors, followed by recognition of two different orthogonal elements, and then more complex images discriminating between elements. The research aimed to demonstrate the models' capabilities based on training base parameters such as the number of images and epoch types. The architectures proposed by the authors in these cases were chosen based on simulation studies conducted on a virtual machine with limited hardware parameters. The proposals present the advantages and disadvantages of different models based on TensorFlow, Keras libraries in the Jupiter environment written based on the Python language. The authors' proposal of the selected AI model enables further work on e.g. image classification, but in a limited computer resource for industrial implementation e.g. on a PLC.

Background: Myalgic encephalomyelitis/chronic fatigue syndrome (ME/CFS) is a complex and debilitating disease with a significant global prevalence of over 65 million individuals. It affects various systems, including the immune, neurological, gastrointestinal, and circulatory systems. Studies have shown abnormalities in immune cell types, increased inflammatory cytokines, and brain abnormalities. Further research is needed to identify consistent biomarkers and develop targeted therapies. A multidisciplinary approach is essential for diagnosing, treating, and managing this complex disease. The current study aims at employing explainable artificial intelligence (XAI) and machine learning (ML) techniques to identify discriminative metabolites for ME/CFS. Material and Methods: The present study used a metabolomics dataset of CFS patients and healthy controls, including 26 healthy controls and 26 ME/CFS patients aged 22-72. The dataset encapsulated 768 metabolites, classified into nine metabolic super-pathways: amino acids, carbohydrates, cofactors, vitamins, energy, lipids, nucleotides, peptides, and xenobiotics. Random forest-based feature selection and Bayesian Approach based-hyperparameter optimization were implemented on the target data. Four different ML algorithms [Gaussian Naive Bayes (GNB), Gradient Boosting Classifier (GBC), Logistic regression (LR) and Random Forest Classifier (RFC)] were used to classify individuals as ME/CFS patients and healthy individuals. XAI approaches were applied to clinically explain the prediction decisions of the optimum model. Performance evaluation was performed using the indices of accuracy, precision, recall, F1 score, Brier score, and AUC. Results: The metabolomics of C-glycosyltryptophan, oleoylcholine, cortisone, and 3-hydroxydecanoate were determined to be crucial for ME/CFS diagnosis. The RFC learning model outperformed GNB, GBC, and LR in ME/CFS prediction using the 1000 iteration bootstrapping method, achieving 98% accuracy, precision, recall, F1 score, 0.01 Brier score, and 99% AUC. Conclusion: RFC model proposed in this study correctly classified and evaluated ME/CFS patients through the selected biomarker candidate metabolites. The methodology combining ML and XAI can provide a clear interpretation of risk estimation for ME/CFS, helping physicians intuitively understand the impact of key metabolomics features in the model.

Background: This research examines how market knowledge and artificial intelligence (AI) interact in different market designs such as business-to-business (B2B) settings while taking emerging technologies and the changing digitalization landscape into account. Objective: The main goal is to understand how AI affects market knowledge in different market designs such as business-to-business (B2B) contexts, taking into account language barriers, practical difficulties, and the revolutionary effects on decision-making and customer interactions. Result: They underscore the transformative potential of artificial intelligence (AI) by highlighting how it shapes market knowledge, encourages customized approaches, and improves marketing efficacy in the business-to-business (B2B) space. Conclusion: In order to create a path for responsible AI integration in B2B marketing, the study concludes with recommendations for standardized terminology related to AI, practical insights into implementation challenges, and ethical issues.

Background: Albumin has a pivotal role in the homeostasis of osmotic pressure and is associated with cardiovascular, nephrotic, hepatic, and nutritional diseases. The detection of hypoalbuminemia is a cornerstone for diagnosis of hidden diseases and patient deterioration. We developed and validated a deep-learning-based model (DLM) for detection of hypoalbuminemia using electrocardiography (ECG). Methods: This historical cohort study included data from consecutive patients from two hospitals. The patient data in one hospital were divided into development (82,499 ECGs from 54,248 patients) and internal validation (20,664 ECGs from 20,664 patients) datasets, whereas the patient data in the other hospital were included in only an external validation (37,421 ECGs from 37,421 patients) dataset. An DLM was developed using a 12-lead ECG signal, age, and sex from the development dataset. The endpoint was hypoalbuminemia, defined by serum albumin concentration below 3.5 g/dL. Results: During the internal and external validations, the areas under the receiver operating characteristic curve of the DLM for the detection of hypoalbuminemia were 0.887 (0.877–0.897) and 0.888 (0.880–0.896), respectively. Among the 27,400 individuals without hypoalbuminemia at the initial laboratory exam, those identified by the DLM as higher-risk patients had a significantly larger change in developing hypoalbuminemia than those in the low-risk group (7.09% vs. 1.01%, p < 0.001) during 24 months. The sensitivity map showed that the DLM focused on the T wave and QRS complex for the detection of hypoalbuminemia. Conclusions: The DLM exhibited a high accuracy for hypoalbuminemia detection and prediction using 12-, 6-, and single-lead ECGs.

This research investigates the potential benefits of integrating machine learning algorithms and IoT sensors in modern agriculture. The focus is on optimizing crop production and reducing waste through informed decisions about planting, watering, and harvesting crops. The paper discusses the current state of machine learning and IoT in agriculture, highlighting key challenges and opportunities. It also presents experimental results that demonstrate the impact of changing labels on the accuracy of data analysis algorithms. The findings recommend that by analyzing wide-ranging data collected from farms, including real-time data from IoT sensors, farmers can make more informed verdicts about factors that affect crop growth. Eventually, the integration of these technologies can transform modern agriculture by increasing crop yields while minimizing waste. In our studies, we achieve a classification accuracy of 99.59% using the Bayes Net algorithm and 99. 46% using Naïve Bayes Classifier, and Hoeffding Tree algorithms. Our results indicate that we achieved high accuracy results in our experiments in order to increase crop growth.

Postural deficits such as hyperlordosis (hollow back) or hyperkyphosis (hunchback) are relevant health issues. Diagnoses depend on the experience of the examiner and are therefore often subjective and prone to errors. Machine learning (ML) methods in combination with explainable ar-tificial intelligence (XAI) tools have proven useful for providing an objective, data-based orien-tation. However, only a few works have considered posture parameters, leaving the potential of more human-friendly XAI interpretations still untouched. Therefore, the present work proposes an objective, data-driven ML system for medical decision support that enables especially human-friendly interpretations using counterfactual explanations (CFs). Posture data for 1151 subjects were recorded by means of stereophotogrammetry. An expert-based classification of the subjects regarding the presence of hyperlordosis or hyperkyphosis was initially performed. Using a Gaussian progress classifier, the models were trained and interpreted using CFs. Label errors were flagged and re-evaluated using confident learning. Very good classification performances for both hyperlordosis and hyperkyphosis were found, whereby the re-evaluation and correction of the test labels led to a significant improvement (MPRAUC = 0.97). A statistical evaluation showed that the CFs seemed to be plausible in general. In the context of personalized medicine, the present study’s approach could be of importance for reducing diagnostic errors and thereby improving the individual adaptation of therapeutic measures. Likewise, it could be a basis for the development of apps for preventive posture assessment.

Cancer diagnosis stands at the cusp of a profound transformation, driven by the burgeoning capabilities of Artificial Intelligence (AI) and Machine Learning (ML). This comprehensive review illuminates the extraordinary impact of AI and ML in the field, unraveling their multifaceted roles in the realm of oncology. In the arena of cancer diagnosis, AI and ML serve as invaluable allies, empowering healthcare professionals with unparalleled tools for precision and efficiency. Notably, AI's prowess in analyzing medical images, including radiological scans and pathology slides, elevates the early detection of malignancies to new heights. Coupled with its ability to dissect genomic data, AI tailors therapeutic strategies to the individual, promising optimized treatment outcomes. However, the incorporation of AI and ML into clinical practice necessitates a careful navigation of ethical considerations, data privacy, and regulatory landscapes. Safeguarding patient data, ensuring transparency, and addressing algorithmic biases emerge as pivotal challenges that require vigilant attention. Yet, the future of AI and ML in cancer diagnosis is brimming with promise. The integration of multi-modal data, real-time monitoring, and Explainable AI (XAI) methods holds the potential to enrich diagnostic capabilities and engender patient trust. Global collaboration and data sharing initiatives are fostering the development of robust AI models. Furthermore, AI's role in cancer prevention, identifying high-risk individuals and enabling targeted preventive strategies, is poised to revolutionize healthcare. AI and ML are forging a path toward an era of unparalleled accuracy, efficiency, and personalization in cancer diagnosis. Challenges notwithstanding, these technologies bear the promise of fundamentally reshaping patient care, elevating outcomes, and advancing the fight against cancer. The ongoing exploration and responsible implementation of AI and ML in oncology will be pivotal in harnessing their full potential and paving the way for a brighter future for cancer patients.

The history of Artificial Intelligence (AI) development dates to the 40s. The researchers showed strong expectations until the 70s, when they began to encounter serious difficulties and investments were greatly, reduced. With the introduction of the Industry 4.0, one of the techniques adopted for AI implementation is Machine Learning (ML) that focuses on the machines ability to receive data series and learn on their own. Given the considerable importance of the subject, researchers have completed many studies on ML to ensure that machines are able to replace or relieve human tasks. This research aims to analyze, systematically, the literature on several aspects, including publication year, authors, scientific sector, country, institution, keywords. Analyzing existing literature on AI is a necessary stage to recommend policy on the matter. The analysis has been done using Web of Science and SCOPUS database. Furthermore, UCINET and NVivo 12 software have been used to complete them. Literature review on ML and AI empirical studies published in the last century was carried out to highlight the evolution of the topic before and after Industry 4.0 introduction, from 1999 to now. Eighty-two articles were reviewed and classified. A first interesting result is the greater number of works published by USA and the increasing interest after the birth of Industry 4.0.

Artificial Intelligence (AI) is becoming increasingly important, especially in the medical field. While AI has been used in medicine for some time, its growth in the last decade has been remarkable. Specifically, Machine Learning (ML) and Deep Learning (DL) techniques in medicine have been increasingly adopted thanks to the growing abundance of health-related data, improved suitability of such techniques for managing large data-sets, and more computational power. The Italian scientific community has been instrumental in advancing this research area. This article aims to conduct a comprehensive investigation of the ML and DL methodologies and applications used in medicine by the Italian research community in the last five years.

Background: Machine learning has revolutionized situational awareness during disaster management by classifying, clustering, and predicting impacted locations and people. Despite its importance, no review has been conducted on machine learning tools for food assistance efforts during emergency or non-emergency situations. The purpose of this scoping review is to address that gap. Methods: Keywords were defined within the concepts of food assistance and machine learning. After the database searches, PRISMA guidelines were followed to perform a partnered, two-round scoping literature review. Text mining and Latent Dirichlet Allocation topic modeling algorithms were used to determine trends. Results: 28 articles met criteria and were included in the analysis. The types of study designs included: model development (42.9%), non-study (i.e., text and opinion) (28.6%), qualitative research (14.3%), case study (10.7%), and meta-analysis (3.6%). There were no quantitative studies. The machine learning tools’ main functions were improving SNAP programs (32.1%), detecting needs and resources (25%), predicting food insecurity (21.4%), and situational awareness of current food insecurity issues (21.4%). None of these studies took place during a disaster or explicitly addressed emergency mitigation, preparedness, or recovery. All of the studies were in early phases of development and implementation. Conclusion: Machine learning tools for improving situational awareness, resource allocation, policymaking, and prediction have the potential to improve food assistance, but there is a lack of implementation and evaluation during all disaster phases. Also needed is more formative work on generating food-related queries and defining variables and features of food security.

In the field of orthodontics, providing patients with accurate treatment time estimates is of utmost importance. As orthodontic practices continue to evolve and embrace new advancements, incorporating machine learning (ML) methods becomes increasingly valuable in improving orthodontic diagnosis and treatment planning. This study aimed to develop a novel ML model capable of predicting the orthodontic treatment duration based on essential pre-treatment variables. Patients who completed comprehensive orthodontic treatment at the Indiana University School of Dentistry were included in this retrospective study. Fifty-seven pre-treatment variables were collected and used to train and test 9 different ML models. The performance of each model was assessed using descriptive statistics, intraclass correlation coefficients, and one-way analysis of variance tests. Random Forest, Lasso, and Elastic Net were found to be the most accurate, with a mean absolute error of 7.27 months in predicting treatment duration. Extraction decision, COVID, intermaxillary relationship, lower incisor position, and additional appliances were identified as important predictors of treatment duration. Overall, this study demonstrates the potential of ML in predicting orthodontic treatment duration using pre-treatment variables.

Ultrasound (US) is commonly used for the diagnosis of liver masses. Ensemble learning has been widely used for image classification, but its methods have not been fully optimized. This study was performed to investigate the usefulness of ensemble learning and compare a number of ensemble learning techniques using multiple convolutional neural network (CNN)-trained models for image classification of liver masses in US images. The US imaging data set was classified into four categories: benign liver tumor (BLT, 6320 images), liver cyst (LCY, 2320 images), metastatic liver cancer (MLC, 9720 images), and primary liver cancer (PLC, 7840 images). In this study, 250 test images were randomly selected for each class, for a total of 1000 images, and the remaining images were used for training. Sixteen different CNNs were used for to train and test the US images. All four types of ensemble learning—soft voting (SV), stacking (ST), weighted average voting (WAV), and weighted hard voting (WHV)—showed greater accuracy than the single CNN. All four types also showed significantly better deep learning performance than ResNeXt101 alone. For image classification of liver masses using US images, ensemble learning improved the performance of deep learning over a single CNN.

The use of drones for various applications has become increasingly popular in recent years, and machine learning has played a significant role in this trend. In this paper, we provide a comprehensive survey of the classification and application of machine learning in drones. The paper begins with an overview of the different types of machine learning algorithms and their applications in drones, including supervised learning, unsupervised learning, and reinforcement learning. Next, we present a detailed analysis of various real-world applications of machine learning in drones, such as object recognition, route planning, obstacle avoidance, search area optimization, and autonomous search. The paper also discusses the challenges and limitations of using machine learning in drones, such as data privacy, data quality, and computational requirements. Finally, the paper concludes with a discussion of the future directions of machine learning in drones and its potential impact on various industries and fields. This paper provides a valuable resource for researchers, practitioners, and students interested in the intersection of machine learning and drones.

Artificial learning and machine learning is playing a pivotal role is the society especially in the field of medicinal chemistry and drug discovery. Particularly its algorithms, neural networks or other recurrent networks drive this area. In this review, we have taken into account the diverse use of AI in a number of pharmaceutical industries including discovery of drugs, repurposing, development of pharmaceutical drug and its clinical trials. In addition, the efficiency of these artificial or machine learning programs in achieving the target drugs in short time period, along with accurate dosage and cost effectively of the drug has also been discussed. Numerous applications of AI in property prediction such as ADMET have been used for prediction of strength of this technology in QSAR. In case of de-novo synthesis, it results in generation of novel drug molecules with unique design proving this a promising field fir drug design. Moreover, its involvement in synthetic planning, ease of synthesis and much more contribute to automated drug discovery in near future.

Artificial intelligence AI or machine learning has proven to be a potential activity in the health and biomedical sciences. Previous research it has found that AI can learn new data and transform it into the useful knowledge. In the field of pharmacology, the aim is to design more efficient and novel vaccines using this method which are also cost effective. The underlying fact is to predict the molecular mechanism and structure for increased likelihood of developing new drugs. Clinical, electronic and high resolution imaging datasets can be used as inputs to aid the drug development niche. Moreover, the use of comprehensive target activity has been performed for repurposing a drug molecule by extending target profiles of drugs which also include off targets with therapeutic potential providing a new indication.

. Identifying students who might have difficulty in their course of studies ahead of time is crucial. There can be many reasons for performance issues, such as personality, family, social, and/or economic. We advocate that educational systems should use machine learning to predict students’ performance based on performance factors. This would allow educational professionals and institutions to put in place a preventive plan to help students towards achievements of their educational goals and success. In this chapter, we propose a student performance prediction method and evaluate its performance. We provide a taxonomy of performance factors that help to gauge students performance from different perspectives and give insights on the categories and features that have more significant impact on students’ performance. The results of this work can be used by education institutions to put in place a student-centric approach to tackle performance issues before they create long-term effects on student’s life. In addition, it will help education policymakers to introduce a tailored approach for the population in specific areas.

Machine Learning (ML) has brought about a transformative era in reactor operations, reshaping monitoring, control, and optimization strategies. This survey comprehensively explores the diverse spectrum of ML applications in industrial reactors. From real-time sensor analysis ensuring reactor functionality to adaptive control algorithms ensuring stability, ML's impact is profound and multifaceted. The benefits of ML are equally evident in optimization, encompassing performance trend prediction, proactive maintenance, and fine-tuning of operations for enhanced efficiency. This review identifies dominant ML techniques, operations stages receptive to ML integration, core data sources, and critical input-output parameters. Aimed at both academics and practitioners, this exploration enriches reactor technologies, unlocking their full potential through insights driven by ML.

Refineries execute a series of interlinked processes, where the product of one unit serves as the input to another process. Potential failures within these processes affect the quality of the end products, operational efficiency, and revenue of the entire refinery. In this context, implementation of a real-time cognitive module, referring to predictive machine learning models, enables to provide equipment state monitoring services and to generate decision-making for equipment operations. In this paper, we propose two machine learning models: 1) to forecast the amount of pentane (C5) content in the final product mixture; 2) to identify if C5 content exceeds the specification thresholds for the final product quality. We validate our approach by using a use case from a real-world refinery. In addition, we develop a visualization to assess which features are considered most important during feature selection, and later by the machine learning models. Finally, we provide insights on the sensor values in the dataset, which help to identify the operational conditions for using such machine learning models.

Although, Artificial intelligence (AI) helps experts with crime analysis, research, and understanding, it has a favourable influence on cyber security. It strengthens the tools that businesses use to safeguard their networks, clients, and workers against dangerous online behaviour. However, artificial intelligence is infamous for requiring a lot of resources. It may not, however, always be relevant. Additionally, it can provide hackers a new tool and advance their abilities. Actually, the VPN industry benefits from AI in the same way. The threat posed by machine learning in AI to user data privacy may be lessened by using a VPN on all of your devices. Because they use machine learning algorithms, VPNs are better equipped to shield their users from internet-based threats. Artificial intelligence (AI) has reportedly being investigated as a means of enhancing internet security for a considerable amount of time, according to Smart Data Collective. We anticipated that AI and machine learning will have a substantial impact on the future of cyber security around two years ago.

The aim was to assess the precision and accuracy of cephalometric analyses performed by artificial intelligence (AI) with and without human augmentation. Four dental professionals with varying experience levels and AI identified 31 landmarks on 30 cephalometric radiographs twice. These landmarks were re-identified by all examiners with the aid of AI. Precision and accuracy were assessed by using intraclass correlation coefficients (ICCs) and mean absolute errors (MAEs). AI revealed the highest precision with a mean ICC of 0.97, while the dental student had the lowest (mean ICC: 0.77). AI/human augmentation method significantly improved precision of the orthodontist, resident, dentist, and dental student by 3.26%, 2.17%, 19.75%, and 23.38%, respectively. The orthodontist demonstrated the highest accuracy with a MAE of 1.57 mm/˚. AI/human augmentation method improved the accuracy of the orthodontist, resident, dentist, and dental student by 12.74%, 19.10%, 35.69%, and 33.96%, respectively. AI demonstrated excellent precision and good accuracy in automated cephalometric analysis. The precision and accuracy of the examiners with the aid of AI improved by 10.47% and 27.27%, respectively. The AI/human augmentation method significantly improved the precision and accuracy of less experienced dental professionals to that of an experienced orthodontist.

The construction of different roads, such as freeways, highways, major roads or minor roads must be accompanied by constant monitoring and evaluation of service delivery. Pavements are generally assessed by engineers in terms of the smoothness, surface condition, structural condition and surface safety. Pavement assessment is often conducted using the qualitative indices such as international roughness index (IRI), pavement condition index (PCI), structural condition index (SCI) and skid resistance value (SRV), which are used for smoothness assessment, surface condition assessment, structural condition assessment, and surface safety assessment, respectively. In this paper, Tehran-Qom Freeway in Iran has been selected as the case study and its smoothness and pavement surface conditions are assessed. At 2-km intervals, a 100-meter sample unit is selected in the slow-speed lane (totally, 118 sample units). In these sample units, the PCI is calculated after a visual inspection of the pavement and the recording of distresses. Then, in each sample unit, the average IRI is computed. The purpose of this study is to provide a method for estimating PCI based on IRI. The proposed theory was developed by Random Forest (RF), and Random Forest optimized by Genetic Algorithm (RF-GA) methods and these methods were validated using correlation coefficient (CC), scattered index (SI), and Willmott’s index of agreement (WI) criteria. The proposed method reduces costs, saves time and eliminates the safety risks.

Manual traffic surveillance can be a daunting task as Traffic Management Centers operate a myriad of cameras installed over a network. Injecting some level of automation could help lighten the workload of human operators performing manual surveillance and facilitate making proactive decisions which would reduce the impact of incidents and recurring congestion on roadways. This article presents a novel approach to automatically monitor real time traffic footage using deep convolutional neural networks and a stand-alone graphical user interface. The authors describe the results of research received in the process of developing models that serve as an integrated framework for an artificial intelligence enabled traffic monitoring system. The proposed system deploys several state-of-the-art deep learning algorithms to automate different traffic monitoring needs. Taking advantage of a large database of annotated video surveillance data, deep learning-based models are trained to detect queues, track stationary vehicles, and tabulate vehicle counts. A pixel-level segmentation approach is applied to detect traffic queues and predict severity. Real-time object detection algorithms coupled with different tracking systems are deployed to automatically detect stranded vehicles as well as perform vehicular counts. At each stages of development, interesting experimental results are presented to demonstrate the effectiveness of the proposed system. Overall, the results demonstrate that the proposed framework performs satisfactorily under varied conditions without being immensely impacted by environmental hazards such as blurry camera views, low illumination, rain, or snow.

Artificial intelligence is dramatically transforming medical imaging. We assessed the levels of artificial intelligence use among radiology trainees and explored their perceived impact of artifi-cial intelligence on the radiology workflow and radiology profession, in correlation with the perceived ease of use and behavioral intention to use artificial intelligence. This cross-sectional study enrolled radiology trainees from Saudi Arabia, and an online 5-part-structured question-naire was disseminated via online networks to trainee in July 2021. We included 98 participants (51 male; age 27.59±2.02 years). Level of use was low; few used it in routine practice (7%). The impact of artificial intelligence on the radiology workflow was positively perceived in all radi-ology workflow steps (3.64–3.97 out of 5). A positive impact on the radiology profession was more frequently perceived for technical and performance aspects (81%–85%) compared with prestige and legal aspects (64%–71%). Perceived ease of use and behavioral intention to use arti-ficial intelligence was associated with the current professional activity, level of use artificial in-telligence use, and perceived impact on the profession as well as on radiology workflow (p<0.05). Levels of artificial intelligence use in radiology are very low. The perceived positive impact of ar-tificial intelligence on radiology workflow and profession is correlated with an increase in be-havioral intention to use artificial intelligence. Thus, increasing awareness about the favorable impact can improve the behavioral use.

In cutting processes tool condition affects the quality of the manufactured parts. As such an essential component to prevent unplanned downtime and to assure machining quality is having information about the state of the cutting tool. The primary function of it is to alert the operator that the tool has reached or is reaching a level of ware beyond which behavior is unreliable. In this paper the tool condition is being monitored by analyzing the electric current on the main spindle via an artificial intelligence model utilizing a LSTM neural network. In the current study the tool is monitored while working on a cylindrical raw piece made of AA6013 aluminum alloy with a custom polycrystalline diamond tool, for the purposes of monitoring the ware of these tools. Spindle current characteristics were obtained using external measuring equipment to not influence the operation of the machine included in a larger production line. As a novel approach, an artificial intelligence model based on a LSTM neural network is utilized for the analysis of the spindle current obtained during a manufacturing cycle and assessing the tool ware range in real time. The neural network was designed and trained to notice significant char-acteristics of the captured current signal. The conducted research serves as a proof of concept for use of a LSTM neural network-based model as a method of monitoring the condition of cutting tools.

Since its advent in the mid-twentieth century, the field of artificial intelligence (AI) has been heavily influenced by biology. From the structure of the brain to evolution by natural selection, core biological concepts underpin many of the fundamental breakthroughs in modern AI. Here, focusing specifically on artificial neural networks (ANNs) that have become commonplace in machine learning, we show the numerous connections between theories based on coevolution, multi-level selection, modularity and competition and related developments in ANNs. Our aim is to illuminate the valuable but often overlooked inspiration biologists have provided AI research and to spark future contributions at this intersection of biology and computer science. Although recent advances in AI have been swift, many significant challenges remain requiring innovative solutions. Thankfully, biology in all its forms still has a lot to teach us, especially when trying to create truly intelligent machines.

The main objective of this paper is to identify the major research areas of ChatGPT through term and keyword co-occurrence network mapping techniques. For conducting the present study, total of 577 publications were retrieved from the Lens database for the network visualization. The findings of the study showed that “chatgpt” occurrence in maximum number of times followed by its related terms such as artificial intelligence, large language model, gpt, study etc. This study will be helpful to library and information science as well as computer or information technology professionals.

Diabetic retinopathy (DR) is the primary factor leading to vision impairment and blindness in diabetic people. Uncontrolled diabetes can damage the retinal blood vessels. Initial detection and prompt medical intervention are vital in preventing progressive vision impairment. Today's growing medical field poses more significant workload and diagnostic demands on medical professionals. In the proposed study, a convolutional neural network (CNN) is employed to detect the stages of DR. This research is crucial for studying DR because of its innovative methodology incorporating two different public datasets. This strategy enhances the model's capacity to generalize unseen DR images, as each dataset encompasses unique demographics and clinical circumstances. The network can learn and capture complicated hierarchical image features with asymmetric weights. Each image undergoes preprocessing using contrast-limited adaptive histogram equalization (CLAHE) and the discrete wavelet transform (DWT). The model is trained and validated using the combined datasets of Dataset for Diabetic Retinopathy (DDR) and the Asia Pacific Tele-Ophthalmology Society (APTOS). The CNN model is tuned with different learning rates and optimizers. The CNN model with Adam optimizer achieved 70% accuracy and an area under curve (AUC) score of 0.82. The recommended study results may reduce diabetes-related vision impairment by early DR severity identification.

Deep learning (DL), which is originated from an artificial neural network (ANN), is one of the major technologies of today's smart cybersecurity systems or policies to function in an intelligent manner. Popular deep learning techniques, such as Multi-layer Perceptron (MLP), Convolutional Neural Network (CNN or ConvNet), Recurrent Neural Network (RNN) or Long Short-Term Memory (LSTM), Self-organizing Map (SOM), Auto-Encoder (AE), Restricted Boltzmann Machine (RBM), Deep Belief Networks (DBN), Generative Adversarial Network (GAN), Deep Transfer Learning (DTL or Deep TL), Deep Reinforcement Learning (DRL or Deep RL), or their ensembles and hybrid approaches can be used to intelligently tackle the diverse cybersecurity issues. In this paper, we aim to present a comprehensive overview from the perspective of these neural networks and deep learning techniques according to today's diverse needs. We also discuss the applicability of these techniques in various cybersecurity tasks such as intrusion detection, identification of malware or botnets, phishing, predicting cyber-attacks, e.g. denial of service (DoS), fraud detection or cyber-anomalies, etc. Finally, we highlight several research issues and future directions within the scope of our study in the field. Overall, the ultimate goal of this paper is to serve as a reference point and guidelines for the academia and professionals in the cyber industries, especially from the deep learning point of view.

To support the decision making process of new investors, this paper aims to implement Machine Learning algorithms to generate investment indications. Three artificial intelligence techniques were implemented, namely: Multilayer Perceptron, Logistic Regression and Decision Tree, which performed the classification of investments. The results of the different algorithms were compared to each other using the metrics: accuracy, precision, recall, and F1-score. The Decision Tree was the algorithm that obtained the best classification metrics and an accuracy of 77%.

This paper explores the integration of multiple intelligences and artificial intelligence (AI) in language learning, focusing on its potential to enhance personalization and engagement. Drawing from existing research and studies conducted in various contexts, including the Philippines, this study aims to contribute to the understanding of the benefits, challenges, and effectiveness of this integration. The paper begins with an introduction that highlights the background and significance of integrating multiple intelligences and AI in language learning, identifying research gaps, objectives, research questions, and the theoretical framework. A literature review provides an overview of multiple intelligences theory by Howard Gardner, the role of AI in language learning, and identifies gaps in the existing literature. The methodology section outlines the research design and approach, participant selection, data collection methods, validity and reliability measures, and ethical considerations. Findings and results are presented through the analysis of qualitative data, exploring emergent themes and patterns. The discussion section critically examines the identified research gaps, discusses the validity and reliability of the study, addresses the scope and limitations, and explores the implications of the findings for theory, practice, and future research. The conclusion summarizes the key findings and contributions of the study, reflects on the achievement of research objectives, offers recommendations for further research, and provides final remarks tying together the main points of the study. This paper contributes to the existing body of knowledge by providing insights into the integration of multiple intelligences and AI in language learning and its impact on personalization, engagement, and language learning outcomes.

The unique characteristics of frescoes on overseas Chinese buildings can attest to the integration and historical background of Chinese and Western cultures. Reasonable analysis and preservation of overseas Chinese frescoes can provide sustainable development for culture and history. This research adopts the image analysis technology based on artificial intelligence, and proposes a ResNet-34 model and method integrating transfer learning. This deep learning model can identify and classify the source of the frescoes of the emigrants, and can effectively deal with the problems such as the small number of fresco images on the emigrants' buildings, poor quality, difficulty in feature extraction, and similar pattern text and style. The experimental results show that the training process of the model proposed in this article is stable. On the constructed Jiangmen and Haikou fresco JHD datasets, the final accuracy is 98.41%, and the recall rate is 98.53%. The above evaluation indicators are superior to classic models such as AlexNet, GoogLeNet, and VGGNet. It can be seen that the model in this article has strong generalization ability and is not prone to overfitting. It can effectively identify and classify the cultural connotations and regions of frescoes.

Especially in the last two decades, due to the developments in durable mechanical circulatory support (MCS) technology and applications, left ventricular assist (LVAD) implantation has become used in more fragile end-stage heart failure patients with higher risk. Despite advances in technology and patient care processes, right heart failure remains the leading cause of morbidity and mortality after durable LVAD implantation. It is difficult to make decisions about the type and duration of MCS during preoperative evaluation, and many clinical, hemodynamic, biochemical and echocardiographic criteria must be taken into account when evaluating the right ventricle. Complex quantitative scoring systems, including measurements of different risk factors for postimplant right ventricular failure, and composite variables, including the anatomical and functional status of the right ventricle, have been used to decide between left or biventricular assist device implantation. The successful use of artificial intelligence (AI) and machine learning (ML) in various applications in the medical field has paved the way for the idea of using it to better predict possible conditions such as right heart failure after LVAD implantation. This review aims to evaluate the current situation of risk prediction models using AI and ML technology, which have become popular in recent years, and possible future developments in predicting right heart failure after the application of durable MCS systems.

There are four categories of medical waste that cannot be mixed as this will cause serious problems such as environmental pollution or infection. In the past, the classification of medical waste often involved a lot of human and material resources to process, with workers at risk of exposure to infectious substances. Therefore, an augmented reality (AR) and artificial intelligence (AI) medical waste classification system and method were developed. This innovative medical waste classification system and method combines AR and AI identification technology to reduce the risk of manual judgment errors by clinical staff when handling medical waste.

Aim: To determine whether an AI model and single sensor measuring acceleration and ECG could model cognitive and physical fatigue for a self-paced trail run. Methods: A field-based protocol of continuous fatigue repeated hourly induced physical (~45 minutes) and cognitive (~10 minutes) fatigue on one healthy participant. Physical load was a 3.8 km, 200 m vertical gain, trail run with acceleration and electrocardiogram (ECG) data collected using a single sensor. Cognitive load was a Multi Attribute Test Battery (MATB) and separate assessment battery including the Finger Tap Test (FTT), Stroop, Trail Making A and B, Spatial Memory, Paced Visual Serial Addition Test (PVSAT), and a vertical jump. A fatigue prediction model was implemented using a Convolutional Neural Network (CNN). Results: When the fatigue test battery results were compared for sensitivity to the protocol load, FTT right hand (R2 0.71) and Jump Height (R2 0.78) were the most sensitive while the other tests were less sensitive (R2 values Stroop 0.49, Trail Making A 0.29, Trail Making B 0.05, PVSAT 0.03, spatial memory 0.003). Best prediction results were achieved with a rolling average of 200 predictions (102.4 s), during set activity types, mean absolute error for ‘walk up’ (MAE200 12.5%) and range of absolute error for ‘run down‘ (RAE200 16.7%). Conclusion: We were able to measure cognitive and physical fatigue using a single wearable sensor during a practical field protocol including contextual factors in conjunction with a neural network model. This research has practical application to fatigue research in the field.

Artificial Intelligence (AI) has seen increased application and widespread adoption over the past decade despite, at times, offering a limited understanding of its inner working. AI algorithms are, in large part, built on weights, and these weights are calculated as a result of large matrix multiplications. Computationally intensive processes are typically harder to interpret. Explainable Artificial Intelligence (XAI) aims to solve this black box approach through the use of various techniques and tools. In this study, XAI techniques are applied to chronic wound classification. The proposed model classifies chronic wounds through the use of transfer learning and fully connected layers. Classified chronic wound images serve as input to the XAI model for an explanation. Interpretable results can help shed new perspectives to clinicians during the diagnostic phase. The proposed method successfully provides chronic wound classification and its associated explanation. This hybrid approach is shown to aid with the interpretation and understanding of AI decision-making processes.

Multiple governmental agencies and private organisations have made commitments for the colonisation of Mars. Such colonisation requires complex systems and infrastructure that could be very costly to repair or replace in cases of cyber-attacks. This paper surveys deep learning algorithms, IoT cyber security and risk models, and established mathematical formulas to identify the best approach for developing a dynamic and self-adapting system for predictive cyber risk analytics supported with Artificial Intelligence and Machine Learning and real-time intelligence in edge computing. The paper presents a new mathematical approach for integrating concepts for cognition engine design, edge computing and Artificial Intelligence and Machine Learning to automate anomaly detection. This engine instigates a step change by applying Artificial Intelligence and Machine Learning embedded at the edge of IoT networks, to deliver safe and functional real- time intelligence for predictive cyber risk analytics. This will enhance capacities for risk analytics and assists in the creation of a comprehensive and systematic understanding of the opportunities and threats that arise when edge computing nodes are deployed, and when Artificial Intelligence and Machine Learning technologies are migrated to the periphery of the internet and into local IoT networks.

The real estate market is exposed to many fluctuations in prices, because of existing correlations with many variables, some of which cannot be controlled or might even be unknown. Housing prices can increase rapidly (or in some cases, also drop very fast), yet the numerous listings available online where houses are sold or rented are not likely to be updated that often. In some cases, individuals interested in selling a house (or apartment) might include it in some online listing, and forget about updating the price. In other cases, some individuals might be interested in deliberately setting a price below the market price in order to sell the home faster, for various reasons. In this paper we aim at developing a machine learning application that identifies opportunities in the real estate market in real time, i.e., houses that are listed with a price substantially below the market price. This program can be useful for investors interested in the housing market. We have focused in a use case considering real estate assets located in the Salamanca district in Madrid (Spain) and listed in the most relevant Spanish online site for home sales and rentals. The application is formally implemented as a regression problem, that tries to estimate the market price of a house given features retrieved from public online listings. For building this application, we have performed a feature engineering stage in order to discover relevant features that allows attaining a high predictive performance. Several machine learning algorithms have been tested, including regression trees, $k$-nearest neighbors, support vector machines and neural networks, identifying advantages and handicaps of each of them.

Transforaminal lumbar interbody fusion (TLIF) is a commonly used technique for treating lumbar degenerative diseases. Here, we developed a fully computer-supported pipeline to predict the cage height and the degree of lumbar lordosis subtraction from the pelvic incidence (PI-LL) after TLIF surgery through preoperative X-ray images. The automated pipeline included two primary stages. First, a deep learning model was used to extract essential features from X-ray images. Second, five machine learning algorithms were trained to identify the optimal models to predict the interbody cage height and postoperative PI-LL. Lasso regression and support vector regression exhibited superior performance for predicting the interbody cage height and postoperative PI-LL, respectively. For cage height prediction, the root mean square error (RMSE) was calculated as 1.01, and the model achieved the highest accuracy at a height of 12 mm, with exact prediction achieved in 54.43% (43/79) of cases. In most of the remaining cases, the prediction error of the model was within 1 mm. In addition, the model demonstrated adequate performance for predicting PI-LL, with an RMSE of 5.19 and an accuracy of 0.81 for PI-LL stratification. In conclusion, the interbody cage height and postoperative PI-LL can be reliably predicted using artificial intelligence and ML models.

Advances in computing technology provide an opportunity to grow and develop an effective crop protection system. This study is a new way of diagnosing plant diseases using a deep and convolutional neural network. Deep learning is the strengthened method of machine learning. It uses a neural network that imitates like a human brain and gains certain information. Although powerful, its training process necessitates millions of tagged data points. The study's Methodology consists of three key stages: data acquisition, pre-processing, and Model Building.

Vertical Indoor Farming (VIF) with hydroponics offers a promising perspective for sustainable food production. Intelligent control of VIF system components plays a key role in reducing operating costs and increasing crop yields. Modern machine vision (MV) systems use Deep Learning (DL) in combination with camera systems for various tasks in agriculture, such as disease and nutrient deficiency detection, and flower and fruit identification and classification for pollination and harvesting. This study presents the applicability of MV technology with DL modelling to detect the growth stages of chilli plants using YOLOv8 networks. The influence of different bird’s eye and side view datasets and different YOLOv8 architectures was analysed. To generate the image data for training and testing the YOLO models, chilli plants were grown in a hydroponic environment and imaged throughout their life cycle using four camera systems. The growth stages were divided into growing, flowering and fruiting classes. All trained YOLOv8 models showed reliable identification of growth stages with high accuracy. The results indicate that models trained with data from both views show better generalisation. YOLO’s middle architecture achieved the best performance.

Over the past decade, recognition of human activities (HAR) has become a vibrant field of research, in particular, the spread in our everyday lives of electronics such as mobile phones, smart cell phones, and video cameras. Furthermore, the advancement in the field of deep methodologies and other paradigms have enabled scientists to enable HAR in many areas, consisting of activities in fitness and wellness. For instance, HAR is one of many resorts to support older people through day-to-day activities to support their cognition and physicality. This study is centered on the key aspects deep learning plays in the development of HAR applications. Although numerous HAR examination studies were carried out previously, there have been no overall studies on this subject, in all the earlier studies there were only specific HAR-related subjects. A detailed review covering all the main subjects in this area is therefore essential. This study discusses the latest developments and works in HAR. It separates the methods and the advantages and disadvantages of each method group. This paper finally addresses many problems in the current HAR subject and provides recommendations for potential study.

This review article explores the transformative impact of Artificial Intelligence (AI) on glaucoma care, focusing on advancements in diagnosis, monitoring, and treatment algorithms. AI technologies have revolutionized the field of ophthalmology by enhancing the accuracy and efficiency of diagnosing glaucoma. Furthermore, AI-powered monitoring systems enable continuous and personalized patient care, facilitating early detection of disease progression. Integrating AI algorithms in treatment protocols promises individualized and optimized therapeutic strategies for better management of glaucoma. This comprehensive review elucidates AI applications' current state and future directions in transforming glaucoma care, emphasizing the potential benefits of improving patient outcomes.

In this paper we use quantum machine learning to detect and classify ocular diseases across age related macular degradation, cataract, diabetic, glaucoma, hypertension, and patological myopia categories versus a control group. We analyze fundus imagery from 1000 patients. Early findings indicate there may be benefit in terms of accuracy and loss function minimization of 2.07% and 1.979x respectively compared to a similar method implemented using traditional computers.

This paper introduces a model-free, "on-the-fly" learning control strategy for arrays of energy converters with adjustable generator damping. The devices are arranged so that they are affected simultaneously by the energy medium. Each device uses a different control strategy, of which at least one has to be the machine learning approach presented in this paper. During operation all energy converters record the absorbed power and control output; the machine learning device gets the data from the converter with the highest power absorption and so learns the best performing control strategy for each state. Consequently, the overall network has a better overall performance than each individual strategy. This concept is evaluated for wave energy converter (WEC) with numerical simulations and experiments with physical scale models in a wave tank. In the first of two numerical simulations, the learnable WEC works in an array with four WECs applying a constant damping factor. In the second simulation, two learnable WECs were learning with each other. It showed that in the first test the WEC was able to absorb as much as the best constant damping WEC, while in the second run it could absorb even slightly more. During the physical model test, the ANN showed its ability to select the better of two possible damping coefficients based on real world input data.

Building deep learning models proposed by third parties can become a simple task when specialized libraries are used. However, a great deal of mystery still surrounds the design of new models or the modification of existing ones. These tasks require in-depth knowledge of the different components or building blocks as well as their dimensions. This information is limited and broken up in different literature. In this article, we collect and explain in-depth the building blocks to design deep learning models, starting from the artificial neuron to the concepts involved in building deep neural networks. Furthermore, the implementation of each building block is exemplified using the Keras library.

The Eurasian grapevine (\textit{Vitis vinifera L.}) is the most widely grown horticultural crop in the world and is important for the economy of many countries. In the wine production chain, grape varieties play an important role, as they directly influence the authenticity and classification of the product. Identifying the different grape varieties is therefore fundamental for quality control and control activities, as well as for regulating production. Currently, ampelography and molecular analysis are the main approaches to identifying grape varieties. However, both methods have limitations. Ampelography is subjective and prone to errors and is experiencing enormous difficulties as ampelographers are increasingly scarce. On the other hand, molecular analyses are very demanding in terms of cost and time. In this scenario, Deep Learning (DL) methods have emerged as a classification alternative to deal with the scarcity of ampelographers and avoid molecular analyses. In this study, the most recent and current methods for identifying grapevine varieties using DL classification-based approaches are presented through a systematic literature review. The steps of the standard DL-based classification pipeline were described for the 18 most relevant studies found in the literature, highlighting their pros and cons. Potential directions for improving this field of research were also presented.

Artificial intelligence (AI) technologies, particularly the subfield of machine learning (ML), has been expected to bring significant benefits to all sectors of business and public services. The manufacturing industry is considered one of the domains most likely to benefit from AI tech-nologies. During the recent years, there has been a growing research and development effort on machine learning–based solutions for manufacturing industries, as shown by the growing number of research publications. However, the business, environmental or societal benefits of applying ML in manufacturing industry have not been reviewed and evaluated. This paper re-views the reported benefits of ML in the manufacturing industry by analysis of scientific publi-cations. The focus of the review is on research papers that were published from 2017 to 2021. The review pays particular attention to the industry sector, manufacturing operations, machine learning methods used, maturity of results and the benefits pursued and achieved. The benefits are divided into business benefits, environmental sustainability, and societal sustainability. The analysis shows that the maturity of ML-based solutions is still low, despite the intensive research. Consequently, future research projects should place more emphasis on the maturity of the solu-tions, which would lead to their broader adoption into operational use, thus benefiting industry and society at large. This calls for closer collaboration between the research community and in-dustry.

Biofilm is a complex community of microorganisms that are attached to surfaces and encased in a self-produced extracellular matrix. Machine learning (ML) techniques have been applied to various aspects of biofilm research, such as predicting biofilm formation, identifying key genes, and designing new therapeutic strategies. In this study, we conducted a bibliometric analysis of machine learning in biofilm research to provide a comprehensive overview of the current state of the field. We searched the Web of Science database for articles published included "machine learning biofilm". A total of 126 articles were identified and analysed. Our results showed that the number of publications on machine learning in biofilm has been increasing rapidly over the past decade, indicating a growing interest in the application of ML techniques to biofilm research. The analysis also revealed that the most common research topics in this area were related to biofilm formation, prediction, and control. Furthermore, the most frequently used ML techniques in biofilm research were artificial neural networks and support vector machines. Overall, our study provides valuable insights into the current trends and future directions of machine learning in biofilm research. It also highlights the importance of interdisciplinary collaboration between biofilm researchers and ML experts to drive innovation in this field.

Preterm birth (PB) is a leading cause of perinatal morbidity and mortality. PB prediction is per-formed by measuring cervical length, with a detection rate of around 70%. Although it is known that a cytokine-mediated inflammatory process is involved in the pathophysiology of PB, no screening method implemented in clinical practice includes cytokine levels as a predictor varia-ble. Here, we quantified cytokines in cervical-vaginal mucus of pregnant women (18-23.6 weeks of gestation) with high- or low-risk for PB determined by cervical length, collecting relevant obstetric information. IL-2, IL-6, IFN-γ, IL-4, and IL-10 were significantly higher in the high-risk group, while IL-1ra was lower. Two different models for PB prediction were created using the Random Forest machine-learning algorithm: the full model with 12 clinical variables and cyto-kine values, and the adjusted model, including the most significant variables -maternal age, IL-2, and cervical length- (detection rate 66 vs 87%, false positive rate 12 vs 3.33%, false negative rate 28 vs 6.66%, and area under the curve 0.722 vs 0.875, respectively). The adjusted model integrat-ing cytokines showed a detection rate 8 points higher than the gold standard calculator, which may allow us to identify PB risk more accurately and implement strategies for preventive in-terventions

In recent years the field of computer science has experienced great changes, due to the incredible advances in the field of artificial intelligence. Deep Learning models are responsible for most of them since the biggest milestones occurred in 2012 when AlexNet won the image classification challenge called ImageNet. These models have demonstrated great performances in different types of complex tasks like image restoration, medical diagnosis or object recognition. Their disadvantages are related to their high data dependency, which forces experts in the field to follow a precise methodology to obtain accurate models. In this paper, we describe a complete workflow that begins with the management of the raw data until the in-depth interpretation of the performance of the models. This should be taken as a high-level consultation document describing good practices that should be applied. Apart from the step-by-step methodology, we present different use cases that correspond to the two main problems of the field: classification and regression.

Deep learning (DL), a branch of machine learning (ML) and artificial intelligence (AI) is nowadays considered as a core technology of today's Fourth Industrial Revolution (4IR or Industry 4.0). Due to its learning capabilities from data, DL technology originated from artificial neural network (ANN), has become a hot topic in the context of computing, and is widely applied in various application areas like healthcare, visual recognition, cybersecurity, and many more. However, building an appropriate DL model is a challenging task, due to the dynamic nature and variations in real-world problems and data. Moreover, the lack of core understanding turns DL methods into black-box machines that hamper development at the standard level. This article presents a structured and comprehensive view on DL techniques including a taxonomy considering various types of real-world tasks like supervised or unsupervised. In our taxonomy, we take into account deep networks for supervised or discriminative learning, unsupervised or generative learning as well as hybrid learning and relevant others. We also summarize real-world application areas where deep learning techniques can be used. Finally, we point out ten potential aspects for future generation DL modeling with research directions. Overall, this article aims to draw a big picture on DL modeling that can be used as a reference guide for both academia and industry professionals.

The methods of Artificial Intelligence (AI) have been used in the planning and operation of power systems for more than 40 years. In recent years, due to the development of microprocessor and data storage technologies, the effectiveness of this use has greatly increased. This paper provides a systematic overview of the application of AI including the use of Machine Learning (ML) to the power system. The potential application areas are divided into four blocks and the classification matrix has been used for clustering the AI application tasks. Furthermore, the data acquisition methods for setting the parameters of AI and ML algorithms are presented and discussed in a systematic way considering the supervised and unsupervised learning methods. Based on this, three complex application examples: wind power generation forecasting, smart grid security as-sessment (using two methods), and automatic system fault detection are presented and discussed in detail. Summary and outlook conclude the paper.

Artificial neural networks are a powerful tool for managing data that is difficult to process and interpret. This paper presents the study of artificial neural networks for information processing generated by an optical encoder based on the polarization of light. A machine learning technique is proposed to train the neural networks, such that the system can predict with remarkable accuracy the angular position in which the rotating element of the neuro-encoder is located, based on information provided by light’s phase shifting arrangements. The proposed neural designs show excellent performance in small angular intervals, and a methodology is proposed to avoid losing this remarkable characteristic in measurements from 0 to 180o or even to 360o. The neuro-encoder is implemented in simulation stage to obtain performance results. This study can be useful to improve capabilities of resolvers or other polyphasic sensors.

Machine learning (ML) has a large capacity to learn and analyze a large volume of data. This study aimed to train different algorithms to discriminate between healthy and pathologic corneal images by evaluating digitally processed spectral-domain optical coherence tomography (SD-OCT) corneal images. A set of 22 SD-OCT images belonging to a random set of corneal pathologies was compared to 71 healthy corneas (control group). A binary classification method was applied; three approaches of ML were used. Once all images were analyzed, representative areas from every digital image were also processed and analyzed for a statistical feature comparison between healthy and pathologic corneas. The best performance was obtained from transfer learning - support vector machine (TL-SVM) (AUROC = 0.94, SPE 88%, SEN 100%) and transfer learning – random forest (TL- RF) method (AUROC = 0.92, SPE 84%, SEN 100%), followed by convolutional neural network (CNN) (AUROC = 0.84, SPE 77%, SEN 91%) and random forest (AUROC = 0.77, SPE 60%, SEN 95%). The highest diagnostic accuracy in classifying corneal images was achieved with the TL-SVM and the TL-RF models. In image classification, CNN was a strong predictor. This pilot experimental study developed a systematic mechanized system to discern pathologic from healthy corneas.

If the development of machine learning and artificial intelligence plays a role in many fields of research and technology today, it has a special relationship with neurosciences. Indeed, historically inspired by our knowledge of the brain, deep learning shares some vocabularies with neurosciences and can sometimes be considered a brain’s model. Taking the particular example of epileptic seizure, which can develop in any biological neural tissue, we raise the question if and how the models used for deep learning can capture or model these pathological events. This particular example is a starting point to discuss the nature, limits, and functions of these models, and what we expect from a model of the brain. Finally, we argue that a pluralistic approach leading to the integrated coexistence of different models is necessary to study the brain in all its complexity.

Fractional calculus gained a lot of attention in the last couple of years. Researchers discovered that processes in various fields follow rather fractional dynamics than ordinary integer-ordered dynamics, meaning the corresponding differential equations feature non-integer valued derivatives. There are several arguments for why this is the case, one of them being that fractional derivatives’ inherit spatiotemporal memory and/or the ability to express complex naturally occurring phenomena. Another popular topic nowadays is machine learning, i.e., learning behavior and patterns from historical data. In our ever-changing world with ever-increasing amounts of data, machine learning is a powerful tool for data analysis, problem-solving, modeling, and prediction. It further provides many insights and discoveries in various scientific disciplines. As these two modern-day topics provide a lot of potential for combined approaches to describe complex dynamics, this article reviews combined approaches of fractional derivatives and machine learning from the past, puts them into context, and thus provides a list of possible combined approaches and the corresponding techniques. Note, however, that this article does not deal with neural networks, as there already is profound literature on neural networks and fractional calculus. We sorted past combined approaches from the literature into three categories, i.e., preprocessing, machine learning &amp; fractional dynamics, and optimization. The contributions of fractional derivatives to machine learning are manifold as they provide powerful preprocessing and feature augmentation techniques, can improve physically informed machine learning, and are capable of improving hyperparameter optimization. Thus, this article serves to motivate researchers dealing with data-based problems, to be specific machine learning practitioners, to adopt new tools and enhance their existing approaches.

Current neural network models can demonstrate reasonable-looking behavior, considered by some developers and researchers human-like. For example, a large language model GPT-3 is susceptible to human-like cognitive biases. Yet there is no data of such models solving emotional intelligence (EI) tasks. They are connected to the abilities that has been previously considered as specifically human EI is an important aspect of human communication. The ability to understand and respond to emotional cues is essential for effective communication. Therefore, it is crucial to determine the ways AI models such as ChatGPT demonstrate EI. The present research aims to measure the EI of GPT-4, a large language model trained by OpenAI. Russian version of the Mayer–Salovey–Caruzo Emotional Intelligence Test sections B, C, D, F, G and H were used in this research. High points were obtained in Understanding emotions scale and Strategic EI. Mean points are obtained in Managing emotions scale. Low and less reliable values are obtained in Using emotions to facilitate thought scale. Thus, GPT-4 seems already capable of identifying emotions in text and describing techniques for managing them. However, complex cases and irregular situations requiring emotions qualitative analysis would be a hard task for GPT-4.

Industrial pig farming is associated with negative technological pressure on the bodies of pigs. Leg weakness and lameness are the sources of significant economic loss in raising pigs. Therefore, it is important to identify predictors of limb condition. This work presents assessments of the state of limbs using indicators of growth and meat characteristics of pigs based on machine learning algorithms. We have evaluated and compared the accuracy of prediction for several ML classification algorithms (Random Forest, K-Nearest Neighbors, Artificial Neural Networks, C50Tree, Support Vector Machines, Naive Bayes, Generalized Linear Models, Boost, and Linear Discriminant Analysis) and have identified the Random Forest and K-Nearest Neighbors as the best performing algorithms for predicting pig leg weakness using a small set of simple measurements that can be taken at an early stage of animal development. Muscle Thickness, Back Fat amount, and Average Daily Gain serve as significant predictors of conformation of pig limbs. Our work demonstrates the utility and relative ease of using machine learning algorithms to assess the state of limbs in pigs based on growth rate and meat characteristics.

This paper investigates the use of deep learning techniques to perform energy demand forecasting. Specifically, the authors have adapted a deep neural network originally thought for image classification and composed of a convolutional neural network (CNN) followed by a multilayered fully connected artificial neural network (ANN). The convolutional part of the network was fed with a grid of temperature forecasting data distributed in the area of interest in order to extract a featured temperature. The subsequent ANN is then fed with this calculated temperature along with other data related to the timing of the forecast. The proposed structure was first trained and then used in a real setting aimed to provide the French energy demand forecast using ARPEGE forecasting weather data. The results show that the performance of this approach is in the line of the performance provided by the reference RTE subscription-based service, which opens the possibility to obtain high accuracy forecasting using widely accessible deep learning techniques through open-source machine learning platforms.

Cancer is a major concern for people, and accurately predicting the probability of cancer incidence and mortality is an important research topic. With the development of big data and artificial intelligence technology, a new machine learning model has emerged. Using 72,591 pieces of data, including age, case count, population size, race, gender, site of onset, and year of discovery, we built a machine learning model. Through calculations, we found that the decision tree, random forest, logistic regression, support vector machine, and neural network achieved testing accuracies of 62.11%, 61.68%, 54.53%, 55.72%, and 63.10%, respectively. With the help of this model, scientists and policymakers can accurately predict future cancer incidence and mortality rates through databases, allowing them to make relevant policies (such as timely allocating doctors and medical resources) to better serve the people.

In this study, we present a novel approach to estimate the Hurst exponent of time series data using a variety of machine learning algorithms. The Hurst exponent is a crucial parameter in characterizing long-range dependence in time series, and traditional methods such as Rescaled Range (R/S) analysis and Detrended Fluctuation Analysis (DFA) have been widely used for its estimation. However, these methods have certain limitations, which we sought to address by modifying the R/S approach to distinguish between fractional Lévy and fractional Brownian motion, and by demonstrating the inadequacy of DFA and similar methods for data that resembles fractional Lévy motion. This inspired us to utilize machine learning techniques to improve the estimation process. In an unprecedented step, we train various machine learning models, including LightGBM, MLP, and AdaBoost, on synthetic data generated from random walks, namely fractional Brownian motion and fractional Lévy motion, where the ground truth Hurst exponent is known. Meaning that we can initialize and create these stochastic processes with a scaling Hurst/scaling exponent which, is then used as the ground truth for training. Furthermore, we perform the continuous estimation of the scaling exponent directly from the time series, without resorting to the calculation of the power spectrum or other sophisticated preprocessing steps, as done in past approaches. Our experiments reveal that the machine learning-based estimators outperform traditional R/S analysis and DFA methods in estimating the Hurst exponent, particularly for data akin to fractional Lévy motion. Validating our approach on real-world financial data, we observe a divergence between the estimated Hurst/scaling exponents and results reported in the literature. Nevertheless, the confirmation provided by known ground truths reinforces the superiority of our approach in terms of accuracy. This work highlights the potential of machine learning algorithms for accurately estimating the Hurst exponent, paving new paths for time series analysis. By marrying traditional finance methods with the capabilities of machine learning, our study provides a novel contribution towards the future of time series data analysis.

Machine learning (ML) is a subdivision of artificial intelligence in which the machine learns from machine-readable data and information. It uses data, learns the pattern and predicts the new outcomes. Its popularity is growing because it helps to understand the trend and provides a solution that can be either a model or a product. Applications of ML algorithms have increased drastically in G.I.S. and remote sensing in recent years. It has a broad range of applications, from developing energy-based models to assessing soil liquefaction to creating a relation between air quality and mortality. Here, in this paper, we discuss the most popular supervised ML models (classification and regression) in G.I.S. and remote sensing. The motivation for writing this paper is that ML models produce higher accuracy than traditional parametric classifiers, especially for complex data with many predictor variables. This paper provides a general overview of some popular supervised non-parametric ML models that can be used in most of the G.I.S. and remote sensing-based projects. We discuss classification (Naïve Bayes (NB), Support Vector Machine (SVM), Random Forest (RF), Decision Trees (DT)) and regression models (Random Forest (RF), Support Vector Machine (SVM), Linear and Non-Linear) here. Therefore, the article can be a guide to those interested in using ML models in their G.I.S. and remote sensing-based projects

In this perspective article, we ponder topographical enhancements of artificial neural networks. In our recent paper in JMLR, we proved a quasi-equivalence between the network width and depth and also discussed the power of intra-links, which can be viewed as network height. In 1982, Hopfield published a network to model human associative memory, which contains many loops for dynamic evolution toward fixed points. Based on noising-denoising loops, diffusion models are recently developed to enable Bayesian modeling and inference with big data. Furthermore, we envision development of multi-AI-agent systems through “netware” engineering as a quantum leap of software engineering for emergent behaviors and autonomous AI at individual and population levels. We believe that the novel use of links and loops in space and time via multi-scale coupling would catalyze the next-generation neural networks.

This study explores the prediction of concrete compressive strength using machine learning models, aiming to overcome the time-consuming and complex nature of conventional methods. Four models—Artificial Neural Network, Multiple Linear Regression, Support Vector Machine, and Regression Tree—are employed and compared for performance. Evaluation metrics such as Mean Absolute Deviation, Root Mean Square Error, Coefficient of Correlation, and Mean Absolute Percentage Error are used. After preprocessing 1030 samples, the dataset is split into 70% for training and 30% for testing. The ANN model, further divided into training, validation (15%), and testing (15%), outperforms others in accuracy and efficiency. This outcome streamlines compressive strength determination in the construction industry, saving time and simplifying the process.

Nowadays, there is extensive production and use of plastic materials for different industrial activities. These plastics, either from their primary production sources or through degradation processes of the plastics themselves, can contaminate the ecosystem with micro and nanoplastics. Once in the aquatic environment, these microplastics can be the basis for the adsorption of chemical pollutants, favoring that these chemical pollutants disperse more quickly in the environment and can affect living beings. Due to the lack of information on adsorption, three machine learning models (random forest, support vector machine, and artificial neural network) to predict different microplastic/water partition coefficients (log Kd) were developed using two different approximations (based on the number of input variables). The best-selected machine learning models present, in general, correlation coefficients upper than 0.92 in the query phase, which indicate that these type of models could be used for a rapid estimation of the absorption of organic contaminants on microplastics.

Background: The growth of arthroplasty procedures requires innovative strategies to reduce inpatients Length of Stay (LOS). This study aims to develop a machine learning prediction model that may aid to predict LOS after hip or knee arthroplasties. Methods: A collection of all the clinical notes of patients undergoing elective primary or revision arthroplasty from 1 January 2019 to 31 December 2019 was performed. The hospitalization has been classified as “Short LOS” if it was less than or equal to 6 days and “Long LOS” if it was greater than 7 days. Clinical data coming from pre-operative laboratory analysis, vital parameters, demographic characteristics of patients were screened. Final data have been used to train a Logistic Regression model with the aim of predicting short or long LOS. Results: Final dataset was composed of 1517 patients (795 “LONG”, 722 “SHORT”, p = 0.3196) with a total of 1541 admissions (729 “LONG”, 812 “SHORT”, p &lt; 0.000). Complete model had a prediction efficacy of 78,99% (AUC 0.7899). Conclusions: Machine learning may facilitate day-by-day clinical practice predicting which patients are suitable for a shorter LOS, from those with a longer LOS in which a cautious approach could be recommended.

Water quality assessments are crucial for human health and environmental safeguards. The utilization of a subset of artificial intelligence such as Machine Learning (ML) presents significant impacts to enhance the prediction and classification of water quality. In this research, a set of diverse ML algorithms was evaluated to handle a comprehensive dataset of water quality measurements over an extended period. The aim was to develop a robust approach for accurately forecasting water quality. This approach employed machine learning classifiers such as Logistic Regression (LR), Support Vector Machine (SVM), Stochastic Gradient Descent (SGD), K-Nearest Neighbors (KNN), Gaussian Process Classification (GPC), Gaussian Naive Bayes (GNB), Random Forest (RF), Decision Tree (DT), XGBoost, and Multilayer Perceptron (MLP). The water quality parameters assessed for pH, hardness, solids, chloramines, sulfate, conductivity, organic carbon, trihalomethanes and turbidity. The XGBoost model exhibited the highest accuracy of 89.47% among the classifiers and Stacked Ensemble Classifiers (SEC) improved the prediction further to 92.98%. The findings suggest that XGBoost and the SEC hold promise as reliable approaches for water quality assessments in contrast of artificial intelligence.

Damage detection based on modal parameter changes becomes popular in the last decades. Nowadays are available robust and reliable mathematical relations to predict the natural frequency changes if damage parameters are known. Using these relations, it is possible to create databases containing a large variety of damage scenarios. Damage can be thus assessed by applying an inverse method. The problem is the complexity of the database, especially for structures with more cracks. In this paper, we propose two machine learning methods, namely the random forest (RF) and the artificial neural network (ANN) as search tools. The databases we developed contain damage scenarios for a prismatic cantilever beam with one crack and ideal and non-ideal boundary conditions. The crack assessment is made in two steps. First, a coarse damage location is found from the networks trained for scenarios comprising the whole beam. Afterward, the assessment is made involving a particular network trained for the segment of the beam on which the crack is previously found. Using the two machine learning methods, we succeed to estimate the crack location and severity with high accuracy for both simulation and laboratory experiments. Regarding the location of the crack, which is the main goal of the practitioners, the errors are less than 0.6%. Based on these achievements, we concluded that the damage assessment we propose, in conjunction with the machine learning methods, is robust and reliable.

In the current age of the Fourth Industrial Revolution ($4IR$ or Industry $4.0$), the digital world has a wealth of data, such as Internet of Things (IoT) data, cybersecurity data, mobile data, business data, social media data, health data, etc. To intelligently analyze these data and develop the corresponding real-world applications, the knowledge of artificial intelligence (AI), particularly, machine learning (ML) is the key. Various types of machine learning algorithms such as supervised, unsupervised, semi-supervised, and reinforcement learning exist in the area. Besides, the deep learning, which is part of a broader family of machine learning methods, can intelligently analyze the data on a large scale. In this paper, we present a comprehensive view on these machine learning algorithms that can be applied to enhance the intelligence and the capabilities of an application. Thus, this study's key contribution is explaining the principles of different machine learning techniques and their applicability in various real-world applications areas, such as cybersecurity, smart cities, healthcare, business, agriculture, and many more. We also highlight the challenges and potential research directions based on our study. Overall, this paper aims to serve as a reference point for not only the application developers but also the decision-makers and researchers in various real-world application areas, particularly from the technical point of view.

This study focuses on predicting traffic speed using the simple Multilayer Perceptron (MLP) model, despite the availability of various models for traffic prediction, with artificial intelligence demonstrating superior predictive capabilities. Emphasizing that the quality of the data holds greater significance than the model itself, the research underscores the challenges posed by data containing significant errors and fluctuations. Unlike relying solely on criteria such as Mean Absolute Deviation (MAD) or coefficient of determination (r2), this study advocates for the use of MAD/range as a more robust metric for prediction accuracy, especially when dealing with data exhibiting substantial order.The study sets the speed limit and traffic value at 0.65 and 0.88, respectively. Notably, both criteria yield identical accuracy results of 13% for MAD/R in predicting speed and 14% for traffic. This parity suggests that the artificial intelligence model performs equally well for both variables, highlighting the importance of considering alternative evaluation metrics in the face of data complexities.

Recent advances in artificial intelligence combined with behavioral sciences have led to the development of cutting-edge tools for recognizing human emotions based on text, video, audio, and physiological data. However, these data sources are expensive, intrusive, and regulated, unlike plants which have been shown to be sensitive to human steps and sounds. A methodology is proposed to use plants as human emotion detectors. Electrical signals from plants are tracked and labeled based on video data. Labeled data are then used for classification. MLP, biLSTM, MFCC-CNN, MFCC-ResNet, and additionally, Random Forests, 1-Dimensional CNN, and biLSTM without windowing models are set using a grid search algorithm with cross-validation. Finally, best-parameterized models are trained and used with the test set for classification. The performance of this methodology is measured with a case study with 54 participants, who were watching an emotionally charged video, as ground truth their facial emotions were simultaneously measured using face emotion analysis. The Random Forest model shows the best performance, particularly in recognizing high-arousal emotions, achieving an overall weighted accuracy of 55.2% and demonstrating high weighted recall in emotions such as fear 61.0% and happiness 60.4%. The MFCC-ResNet model offers decently balanced results, with Accuracy(MFCC-ResNet)=0.318 and Recall (MFCC-ResNet)=0.324. With the MFCC-ResNet model fear and anger are recognized with 75% and 50% recall respectively. Thus, using plants as an emotion recognition tool seems worth investigating, addressing both cost and privacy concerns.

Real estate market analysis and place-based decision-making can both benefit from understanding house price development. Although considerable amounts of interest have been devoted to housing price modelling, the assessment of house price fluctuation still requires further comparing studies. Housing price prediction is challenging as contributing factors are quite dynamic and subject to a variety of regulating elements. The future understanding of the housing market trends not only provides sufficient customers’ investment trust potential but also enables the financial support to progress more realistic in advance. In this study, a comprehensive data-informed framework is developed to investigate and anticipate real estate house prices using historical data by combining explanatory features. We examined about 500 houses in the Boston area as a case study and discussed how the increase in housing prices could vary by each of the contributing components. Fourteen Machine Learning (ML) regressors imply to the dataset and lead to a comparative study of the accuracy of all the models. ML-based regressors forecast real estate home prices as a function of thirteen influencing factors. The most informative features were also selected by conducting the Permutation Feature Importance technique on all the features The study provides a comprehensive tool for evaluating the robustness and efficiency of ML models for housing price predictions. The results highlighted Random Forest as the best model has an R2 equals to 0.88 and Voting Regressor as the second highest rated model has R2 equals to 0.87. Results of multivariate exploratory data analysis also implied that the average number of rooms and percentage of the lower status of the population have the most significant impact on the price range predictions.

Today, across the most critical problems faced by hospitals and health centers are those caused by the existence of patients who do not attend their appointments. Among others, this practice generates waste of resources and increases the patients’ waiting list. To handle these problems, hospitals are actively trying to implement methods to reduce the idle time caused by patient no-shows. Many scheduling systems developed require predicting whether a patient will show up for an appointment or not. Although, a challenging problem resides in obtaining these estimates precisely. The goal of this work is to analyze how objective factors influence a patient not to attending their appointment, to identify the main causes that contribute to a patient’s decision, and to be able to predict whether or not the patient will attend the scheduled appointment. As a result, the obtained model is tested on a real dataset collected in a health center linked to the University of Vale do Itajaí (UNIVALI), which includes 25 features and about 5000 samples. The algorithm that produced the best results for the available dataset is the Random Forest classifier. It reveals the best recall rate (0.91), since it measures the ability of a classifier to find all the positive instances and achieves a receiver operating characteristic curve rate of 0.969.

The forecast of electricity demand has been a recurrent research topic for decades, due to its economical and strategic relevance. Several Machine Learning (ML) techniques have evolved in parallel with the complexity of the electric grid. This paper reviews a wide selection of approaches that have used Artificial Neural Networks (ANN) to forecast electricity demand, aiming to help newcomers and experienced researchers to appraise the common practices and to detect areas where there is room for improvement in the face of the current widespread deployment of smart meters and sensors, which yields an unprecedented amount of data to work with. The review looks at the specific problems tackled by each one of the selected papers, at the results attained by their algorithms, and at the strategies followed to validate and compare the results. This way, it is possible to highlight some peculiarities and algorithm configurations that seem to consistently outperform others in specific settings.

Efficient triaging and referral assessment are critical in ensuring prompt medical intervention in the Community Health Care (CHC) system. However, the existing triaging systems in many Community Health Services are an intensive, time-consuming process and often lack accuracy, particularly for various symptoms that might represent heart failure or other health-threatening conditions. There is a noticeable limit of research papers describing AI technologies for triaging patients. This paper proposes a novel quantitative data-driven approach using machine learning (ML) modelling to improve the community clinical triaging process. Furthermore, this study aims to employ the feature selection process and machine learning power to reduce the triaging process’s waiting time and increase accuracy in clinical decision-making. The model was trained on medical records of “Heart Failure” patients’ dataset, which included demographics, past medical history, vital signs, medications, and clinical symptoms. A comparative study was conducted using the list of machine learning algorithms where XGBoost demonstrated the best performance among other ML models. The triage levels of 2,35,982 patients achieved an accuracy of 99.94%, precision of 0.9986, recall of 0.9958, and f1-score of 0.9972 within 0.059 seconds. The proposed diagnostic model can be implemented for the CHC decision system and be developed further for other medical conditions.

Machine learning (ML) methods has recently contributed very well in the advancement of the prediction models used for energy consumption. Such models highly improve the accuracy, robustness, and precision and the generalization ability of the conventional time series forecasting tools. This article reviews the state of the art of machine learning models used in the general application of energy consumption. Through a novel search and taxonomy the most relevant literature in the field are classified according to the ML modeling technique, energy type, perdition type, and the application area. A comprehensive review of the literature identifies the major ML methods, their application and a discussion on the evaluation of their effectiveness in energy consumption prediction. This paper further makes a conclusion on the trend and the effectiveness of the ML models. As the result, this research reports an outstanding rise in the accuracy and an ever increasing performance of the prediction technologies using the novel hybrid and ensemble prediction models.

ackground: The swift assimilation of Artificial Intelligence (AI) across multiple industries is altering the worldwide economic terrain. Unprecedented opportunities and difficulties are brought about by this revolutionary technology, which has an impact on innovation, trade, labor markets, and security. Objective: The goal of this study is to thoroughly investigate the economic effects of AI by exploring how it may affect labor markets, innovation, trade internationally, and security. The goal is to offer insights that support strategic decision-making and policy formation by examining current trends, opportunities, and difficulties. Results: The research highlights the dual character of artificial intelligence's influence, highlighting both its potential to spur economic expansion and its drawbacks, including the loss of jobs, a lack of standards, and security issues. The study highlights how crucial cooperation is to overcoming these obstacles and realizing AI's full potential. Conclusion: The balancing opportunities and risks becomes critical as AI continues to change the economic landscape. The report promotes proactive steps including ethical AI design guidelines, ongoing worker retraining, and flexible regulatory strategies. As we shape an AI future that puts inclusion, creativity, and responsible governance first, collaboration emerges as a key theme.

In recent years, intelligent identification and prediction of ore deposits based on deep learning algorithm and image processing technology has gradually become one of the research frontiers in the field of geological and metallogenic prediction. However, this method also has many problems that need to be solved. For example, (1) very few trainable image samples containing mineral point labels; (2) The geological image features are small and irregular, and the image similarity is high; (3) It is difficult to calculate the influence of different geological prospecting factors on ore mineralization. Based on this, this paper constructs a deep learning network model Multiscale Feature Attention Framework (MFAF) based on geo-image data. The results show that MFCA-Net module in MFAF model can solve the problem of scarce mine label images to a certain extent. In addition, the channel attention mechanism SE-Net module can quantify the difference of influence of different source factors on mineralization. The prediction map is obtained by applying the MFAF model in the study of deposit identification and prediction in the research area of the southern section of Qin-hang metallogenic Belt. In the forecast map, many regions have high metallogenic potential. Through observation, it is found that the above predicted area covers 100% of the known ore deposits at present, which has a good prediction effect. Later, we can find out the specific reasons through field verification. The multi-scale feature fusion and attention mechanism MFA Framework in this paper can provide a new way of thinking for geologists in mineral exploration. The research of this paper also provides resource guarantee and technical support for the sustainable exploitation of mineral resources and the sustainable growth of society and economy.

Psychomotor developmental delay in infants includes failure to acquire abilities such as sitting, walking, grasping objects and communication at the ages when most infants have acquired these abilities. Known risk factors include a large number of aspects of family environment, socioeconomic position, problems in pregnancy and birth, and maternal health. It is clinically useful to be able to screen for developmental delay so that healthcare interventions can be considered. The present research used machine learning (random forest) to create an algorithm predicting psychomotor delay in 9-month-old infants using information ascertainable at birth and in early infancy. The dataset was the UK longitudinal Millennium Cohort study. Fifty-two predictors measuring socioeconomic indicators, paternal, family and social support for the mother, beliefs about good parenting, maternal health, pregnancy and birth were included in the initial algorithm. Feature reduction showed that of the 52 variables, birthweight, family income and parents’ ages had the highest feature importance scores and could alone correctly predict developmental delay with over 99% sensitivity and 100% specificity. The relationships between delay and some of the predictors, particularly income, were nonlinear and complex. The results suggest that the risk of psychomotor developmental delay can be identified in early infancy using machine learning, and that the best predictors are factors present prior to birth. Surprisingly, the most important factors included in the present study did not include illnesses during pregnancy such as eclampsia and infections.

Structural health monitoring (SHM) has become paramount for developing cheaper and more reliable maintenance policies. The advantages coming from adopting such process have turned out to be particularly evident when dealing with plated structures. In this context, state-of-the-art methods are based on exciting and acquiring ultrasonic guided waves through a permanently installed sensor network. A baseline is registered when the structure is healthy, and newly acquired signals are compared to it to detect, localize and quantify damage. To this purpose, the performance of traditional methods based on tomographic algorithms has been overcome by machine learning approaches, which allow processing a larger amount of data without losing diagnostic information. However, to date, no diagnostic method can deal with varying environmental and operational conditions. This works aims to develop a framework for mitigating the impact of temperature variations on ultrasonic guided wave-based SHM through generative artificial intelligence. A variational autoencoder and singular value decomposition were combined to learn the influence of temperature on guided waves. After training, the generative part of the algorithm was used to reconstruct signals at new unseen temperatures. Moreover, a refined version of the algorithm called forced variational autoencoder was introduced to further improve the reconstruction capabilities. The accuracy of the proposed framework was demonstrated against real measurements on a composite plate.

Different machine learning models (multiple linear regression, vector support machines, artificial neural networks and random forests) are applied to predict the monthly global irradiation (MGI) from different input variables (latitude, longitude and altitude of meteorological station, month, average temperatures, among others) of different areas of Galicia (Spain). The models were trained, validated and queried using data from three stations, and each best machine model was checked in two independent stations. The results obtained confirmed that the best ML methodology is the ANN model which presents the lowest RMSE value in the validation and querying phases 122.6·10kJ/(m2∙day) and 113.6·10kJ/(m2∙day), respectively, and predict conveniently for independent stations, 201.3·10kJ/(m2∙day) and 209.4·10kJ/(m2∙day), respectively. Given the good results obtained, it is convenient to continue with the design of artificial neural networks applied to the analysis of monthly global irradiation.

Deep learning has already revolutionised the way we process a wide range of data, in many areas of our daily life. The ability to learn abstractions and relationships from heterogeneous data, has provided impressively accurate prediction and classification tools to handle increasingly big datasets. This has a significant impact on the growing wealth of omics datasets, with the unprecedented opportunity for a better understanding of the complexity of living organisms. While this revolution is transforming the way we analyse these data, explainable deep learning is emerging as an additional tool with the potential to change the way we interpret biological data. Explainability addresses critical issues such as transparency, so important when computational tools are introduced especially in clinical environments. Moreover, it empowers artificial intelligence with the capability to provide new insights in the input data, thus adding an element of discovery to these already powerful resources. In this review we provide an overview of the transformative effects explainable deep learning is having on multiple sectors, ranging from genome engineering and genomics, from radiomics to drug design and clinical trials. We offer a perspective to life scientists, to better understand the potential of these tools, and a motivation to implement them in their research, by suggesting learning resources they can use to move their first steps in this field.

With the exponential growth of machine learning and development of Artificial Neural Network (ANNs) in recent years, there is great opportunity to leverage this approach and accelarate bio-logical discoveries through applications on the analysis of bioinformatics data. Various types of datasets including for example protein or gene interaction networks, molecular structures and cellular signalling pathways, have already been used for machine learning by training ANNs for inference and pattern classification. However, unlike regular data structures that are commonly used in the computer science and engineering fields, bioinformatics datasets present challenges that require unique algorithmic approaches. The recent development of the geometric and deep learning approach within the machine learning field, is very promising towards accelerating analysis complex bioinformatics datasets. The principles of ANNs and their importance for bio-informatics machine learning is demonstrated herein, through presentation of the undelying mathematical and statistical foundations from group theory, symmetry, linear algebra. Further-more, the structure and functions of ANN algorithms that form the core principles of artificial intelligence are explained, in relation to the bioinformatics data domain. Overall, the manuscript provides guidance for researchers to understand the principles required for practicing machine learning and artificial intelligence, with the special considerations towards bioinformatics applications.

All types of sports are potential application scenarios for automatic and real-time visual object and event detection. In rink hockey, the popular roller quad skate variant of hockey team sports, it is of great interest to automatically track player’s movements and positions, player’s sticks and, also, making other judgments, such as being able to locate the ball. In this work, we introduce a real-time pipeline composed by an object detection model, created specifically for rink hockey games, followed by a knowledge-based event detection module. Even in the presence of occlusions and quick motions, our deep learning object detection model effectively identifies and tracks, in real-time, important visual elements such as: ball; players; sticks; referees; crowd; goalkeeper; and goal. Using a curated dataset composed by a collection of videos of rink hockey, comprising 2525 annotated frames, we trained and evaluated the algorithm performance and compare it to state of the art object detection techniques. Our object detection model, based on YOLOv7, presents a global accuracy of 80%, and presents a good performance in terms of accuracy and speed, according to our results, making it a good choice for rink hockey applications. In our initial tests, the event detection module successfully detected one important event type in rink hockey games, the occurrence of penalties.

The goal was to create a novel machine learning (ML) model which can predict the magnitude and direction of pubertal mandibular growth in males with Class II malocclusion. Lateral cephalometric radiographs of 123 males at three time points (T1: 12, T2: 14, T3: 16 years old) were collected from an online database of longitudinal growth studies. Each radiograph was traced, and 7 different ML models were trained using 38 data points obtained from 92 subjects. 31 subjects were used as a test group, to predict post-pubertal mandibular length and Y-axis using input data from T1 and T2 combined (2-year prediction), and T1 alone (4-year prediction). Mean absolute errors (MAEs) were used to evaluate the accuracy of each model. For all ML methods tested using the 2-year prediction, the MAEs for post-pubertal mandibular length ranged from 2.11-6.07mm and 0.85-2.74° for the Y-axis. For all ML methods tested with 4-year prediction, the MAEs for post-pubertal mandibular length ranged from 2.32-5.28 mm and 1.25-1.72° for the Y-axis. Besides its initial length, the most predictive factors for mandibular length were found to be chronological age, upper and lower face heights, upper and lower incisor positions and inclinations. For the Y-axis, the most predictive factors were found to be Y-axis at earlier time points, SN-MP, SN-Pog, SNB and SNA. Whilst the potential of ML techniques to accurately forecast future mandibular growth in Class II cases is promising, a requirement for more substantial sample sizes exists to further enhance the precision of these predictions.

The medical & the dental field is a never ending field of innovations & developments and each time the reasearchers come up with something new. One such new dimension in the fields of medicine being the incorporation of Artificial intelligence assisted technologies improving diagnosis, treatmemt plan and treatment stategies. This review focusses on the application of different technologies of AI in different fields of medicine.

The need for Artificial Intelligence (AI) and Machine Learning (ML) technologies is increasingly being leveraged for optimizing Data centers’ (DCs’) operations as the volume of operations management data increase tremendously. These strategies can assist operators in better understanding their DC operations and making informed decisions up front to preserve service reliability and availability. Aiming at creating models that optimize energy efficiency, identify inefficient resource utilization and scheduling policies, and predict outages. Apart from model hyperparameter tuning, feature selection is a crucial step to identify relevant features with the objective of providing insight into the data, improving performance, and reducing computational expenses. Although several feature selection methods have been discussed in various domains, none have been discussed in the context of the data center. This paper introduces SHapley Additive exPlanation (SHAP), a class of additive feature attribution values-based feature selection that is rarely discussed in literature. We compared the effectiveness of SHAP method with several widely used methods. We used a real DC dataset obtained from the ENEA CRESCO6 cluster with 2,0832 cores to evaluate the methods. To demonstrate the comparison of the methods, we picked the top 10 most important features from each method, the predictions were retrained, and their performance was evaluated using MAE, RMSE, and MPAE. The results show that the SHAP-assisted feature selection performed best and align with human intuition.

No-show appointments in healthcare is a problem faced by medical centers around the world, and understand the factors associated with the no-show behavior is essential. In the last decades, artificial intelligence took place in the medical field and machine learning algorithms can work as a efficient tool to understand the patients behavior and to achieve better medical appointment allocation in scheduling systems. In this work, we provide a systematic literature review (SLR) of machine learning techniques applied to no-show appointments aiming at establishing the current state-of-the-art. Based on a SLR following the Kitchenham methodology, 24 articles were found and analyzed, in which the characteristics of the database, algorithms and performance metrics of each studies were synthesized. Results regarding which factors have a higher impact on missed appointment rates were analyzed too. The results indicate that the most appropriate algorithms for building the models are decision tree algorithms. Furthermore, the most significant determinants of no-show were related to the patients age, whether the patient missed a previous appointment, and the distance between the appointment and the patients scheduling.

Several studies suggest that COVID-19 may be accompanied by symptoms such as a dry cough, muscle aches, sore throat, and mild to moderate respiratory illness. The symptoms of this disease indicate the fact that COVID-19 causes noticeable negative effects on the lungs. Therefore, considering the health status of the lungs using X-rays and CT scans of the chest can significantly help diagnose COVID-19 infection. Due to the fact that most of the methods that have been proposed to COVID-19 diagnose deal with the lengthy testing time and also might give more false positive and false negative results, this paper aims to review and implement artificial intelligence (AI) image-based diagnosis methods in order to detect coronavirus infection with zero or near to zero false positives and false negatives rates. Besides the already existing AI image-based medical diagnosis method for the other well-known disease, this study aims on finding the most accurate COVID-19 detection method among AI methods such as machine learning (ML) and artificial neural network (ANN), ensemble learning (EL) methods.

The combination of artificial intelligence algorithms and numerical methods has recently become popular in the prediction of macroscopic and microscopic hydrodynamics parameters of bubble column reactors. The multi inputs and outputs machine learning can cover small phase interactions or large fluid behavior in industrial domains. This numerical combination can develop the smart multiphase bubble column reactor with the ability of low-cost computational time. It can also decrease case studies for the optimization process when big data is appropriately used during learning. There are still many model parameters that need to be optimized for a very accurate artificial algorithm, including data processing and initialization, the combination of inputs and outputs, number of inputs and model tuning parameters. For this study, we aim to train four inputs big data during learning process by an adaptive neuro-fuzzy inference system or adaptive-network-based fuzzy inference system (ANFIS) method, and we consider the superficial gas velocity as one of the input variables, while for the first time, one of the computational fluid dynamics (CFD) outputs named gas velocity is used as an output of the artificial algorithm. The results show that the increasing number of input variables improves the intelligence of the ANFIS method up to , and the number of rules during learning process has a significant effect on the accuracy of this type of modeling. The results also show that propper selection of model parameters results in more accuracy in prediction of the flow characteristics in the column structure.

(1) Background: Ventilator-associated pneumonia (VAP) causes high mortality among patients with respiratory disease and imposes major burdens on healthcare infrastructure. Models that use electronic health record data to predict the onset of VAP may spur earlier treatment and improve patient outcomes. We developed and studied the performance of interpretable machine learning (ML) models that predict the onset of VAP from electronic health records (EHRs); (2) Methods: We trained Logistic Regression (LR), full feature Explainable Boosting Machine (fEBM), and eXtreme Gradient Boosting (XGBoost) ML models on data from the MIMIC- III (v1.3) database. Model performance was measured by area under the receiver operating characteristic curves (AUCs). We trained a minimal-feature EBM model (mEBM) with features derived from white blood cell (WBC) counts, duration of ventilation, and Glasgow Coma Scale (GCS). Finally, model robustness was evaluated on randomly sparsified EHR datasets; (3) Results: The fEBM model outperformed the XGBoost and LR models at 24 hours post-intubation. The mEBM model maintained an AUC of 0.893. The fEBM model performance remained robust on sparsified datasets; (4) Conclusions: Our novel interpretable ML algorithm reliably predicts the onset of VAP in intubated patients. Integration of this EBM-based model into clinical practice may enable clinicians to better anticipate and prevent VAP.

The combination of wet-lab experimental data on multi-site combinatorial mutations and machine learning is an innovative method in protein engineering. In this study, we present an improved innovative sequence–activity relationship (innov'SAR) methodology based on novel descriptors and digital signal processing (DSP) to construct a predictive model. In this improved approach, 21 experimental (R)-selective amine transaminases from Aspergillus terreus (AT-ATA) were used as an input to predict higher thermostability than that predicted using the existing data. We successfully improved the determination coefficient (R2) of the model from 0.66 to 0.92. In addition, root mean square deviation (RMSD) and root mean square fluctuation (RMSF) were estimated and conformation analysis based on molecular dynamics simulations was performed to verify the enhanced thermal stability of the screened mutants. The improved innov'SAR algorithm enhanced the predictive accuracy, suggesting a method for modifying the stability of AT-ATA, which may help in directed evolutionary screening and open up new avenues for protein engineering.

Machine learning (ML) is penetrating in all walks of life and is one of the major driving forces behind the fourth industrial revolution, typically known as Industry 4.0. The purpose of the present study is to review the state-of-the-art ML applications in the biofuels' life cycle stages, i.e., soil, feedstock, production, consumption, and emissions. A keyword search is performed to retrieve relevant articles from the databases of the Web of Science and Google Scholar. ML applications in the soil stage were mostly based on the use of satellite images of land for estimation of biofuels yield or suitability analysis of agricultural land. In the second stage of the life cycle, assessment of rheological properties of the feedstocks and their effect on the quality of biofuels were dominant studies reported in the literature. The production stage included estimation and optimization of quality, quantity, and process conditions. The fuel consumption and emissions stage included analysis of engine performance and estimation of emissions temperature and composition, such as NOx CO, and CO2. This study identified the following trends: dominant ML method, the stage of life cycle getting more usage of ML, the type of data used for the development of the ML-based models, and the stage-wise frequently used input and output variables. The findings of this article are beneficial for academia and industry-related people involved in model development in different stages of biofuel’s life cycle.

Classical methods for inverse problems are mainly based on regularization theory. In particular those which are based on optimization of a criterion with two parts: a data-model matching and a regularization term. Different choices for these two terms and great number of optimization algorithms have been proposed. When these two terms are distance or divergence measures, they can have a Bayesian Maximum A Posteriori (MAP) interpretation where these two terms correspond, respectively, to the likelihood and prior probability models.

This article aims to investigate the potential of artificial intelligence (AI) in revolutionizing the education sector and further advancing the vision of Education 6.0. This study explores how AI can foster personalized learning experiences and adaptive pedagogy. By analyzing recent developments and real-world applications of AI in education, this article offers insights into how AI can support educators in tailoring instruction to individual students' needs, promoting engagement, and optimizing learning outcomes. The article also discusses ethical considerations and challenges associated with the integration of AI in education, emphasizing the importance of responsible implementation and human supervision.