Paracetamol or acetaminophen (N-acetyl-para-aminophenol, APAP) is an analgesic and antipy-retic drug commonly used worldwide, implicated in numerous intoxications due to overdose, and causing serious liver damage. APAP can cross the blood-brain barrier and affects brain function in numerous ways including pain signals, temperature regulation, neuroimmune response and emotional behavior; however, its effect on adult neurogenesis has not been thoroughly investi-gated. We analyze the effect of APAP overdose (750 mg/kg/day), for 3 and 4 consecutive days and after cessation of APAP administration for 6 and 15 days, on cell proliferation and survival in two relevant neurogenic zones: the subgranular zone of the dentate gyrus and the hypothalamus. The involvement of liver damage (plasma transaminases), neuronal activity (c-Fos) and astroglia (GFAP) was also evaluated. Our results indicated that repeated APAP overdoses were associated with inhibition of adult neurogenesis in a context of elevated liver transaminase levels, neuronal hyperactivity and as-trogliosis. These effects were partially reversed after cessation of APAP administration for 6 and 15 days. In conclusion, these results suggest that APAP overdose impairs adult neurogenesis in the hip-pocampus and hypothalamus, a fact that may contribute to the effects of APAP on brain function.

Dissimilar welds between ferritic and austenitic steels represent a good solution for exploiting the best performance of stainless steels at high and low temperatures and in aggressive environments, while minimizing costs. Therefore, they are widely used in nuclear and petrochemical plants, however, due to the different properties of the steels involved, the welding process can be challenging. Fusion welding can be specifically addressed to connect low-carbon, or low-alloy steels, with high-alloy steels, which have similar melting point. Welding of thick plates can be performed with electric arc in multiple passes or in a single pass by means of a laser beam equipment. Since microstructure and consequently mechanical properties of the weld are closely related to composition, the choice of the filler metal and processing parameters, which in turn affects the dilution rate, plays a fundamental role. Numerous technical solutions were proposed for welding dissimilar steels and much research was developed on the weldment metallurgy; therefore, this article is aimed at a review of the most recent scientific literature on the issues relating to the fusion welding of ferritic / austenitic steels. Two specific sections are dedicated respectively to electric arc and laser beam welding; finally, metallurgical issues, related to dilution and thermal field are debated in the discussion section.

Outdoor lighting is becoming increasingly widespread, and residents are suffering from serious light pollution as a result. Residents’ awareness of their rights to protection has gradually increased. However, due to the sometimes-inaccessible nature of residential vertical light incidence intensity data and the high cost of obtaining specific measurements, there is no appropriate hierarchic compensation for residents suffering from different degrees of light pollution. It is therefore important to measure light pollution levels and their damage at the neighborhood scale to provide residents with basic materials for proper protection and to create more politically suitable solutions. This article presents a light pollution assessment method that is easy to perform, is low-cost, and has a short data-processing cycle. This method can be used to monitor residential zone light pollution in other cities. We chose three open areas to test the spatial variation pattern of light intensity. The results are in accordance with spatial interpolation patterns and can be fit, with high precision, using the IDW method. This approach can also be used in 3 dimensions to quantitatively evaluate the distribution of light intensity distribution. We use a mixed-use zone in Beijing known as The Place as our case study area. The vertical illumination at the windows of residential buildings ranges from 2 lux to 23 lux; the illumination in some areas is far higher than the value recommended by CIE. Such severe light pollution can seriously interfere with people's daily lives and has a serious influence on their rest and health. The results of this survey will serve as an important database to assess whether the planning of night-time lighting is scientific and whether it provides residents with a basis for the protection of their rights.

Abstract This study investigates the assessment literacy, perceived practice, and observed practice of CBA practices among TVET teachers and assessors in private TVET colleges in South Gonder Zone, Ethiopia. The participants included 49 teachers and 14 assessors. Data collection utilized a modified four-option multiple-choice test, the Teacher Assessment Competency Inventory Questionnaire, a five-point Likert scale for perceived and observed practices, a semi-structured observation checklist, and interviews. Descriptive analysis, including mean scores, standard deviation, one-sample t-test, and proportions (%), was employed to analyze the data. Pearson correlation test was used to explore relationships between teacher assessment test scores, observed practices, and perceived practices. Findings revealed that private TVET teachers in the Amhara National Regional State lacked competence in assessing students' competence, falling short of overall and specific standards in both the assessment competence test and real classroom practice. Despite this, teachers modestly perceived their assessment practices across competency domains. Consequently, there were significant differences between teachers' actual competence and practice in educational assessments and their self-perceived practice. Qualitative approaches, employing theme analysis of assessment practice from semi-structured observations and interviews, highlighted poor performance among teachers on most assessment criteria. A small percentage demonstrated competence in specific concepts. Overall, the majority of teachers exhibited low levels of assessment literacy, suggesting a need for professional support in educational assessment approaches to enhance competence among TVET teachers.

P-band radar remote sensing applied during the Airborne Microwave Observatory of Subcanopy and Subsurface (AirMOSS) mission has shown great potential for estimation of root zone soil moisture. When retrieving the soil moisture profile (SMP) from P-band radar, a mathematical function describing the vertical moisture distribution is required. Because only a limited number of observations are available, the number of free parameters of the mathematical model must not exceed the number of observed data. For example, a second order polynomial that contains 3 free parameters was presumed based on in-situ SMP data. The polynomial is currently parameterized based on 3 backscatter observations provided by AirMOSS (i.e. one frequency at three polarizations of HH, VV and HV). In this paper, a more realistic, physically-based SMP model containing 3 free parameters is derived based on a solution to Richards’ equation for unsaturated flow in soils. Evaluation of the new SMP model based on both numerical simulations and measured data revealed that it exhibits greater flexibility for fitting measured and simulated SMPs than the currently applied polynomial. It is also demonstrated that the new SMP model can be reduced to a second order polynomial at the expense of fitting accuracy.

Channel bends are one of the most important characteristic features of natural streams. These bends often create the conditions for a hyporheic zone, which has been recognized as a critical component of stream ecosystems. The streambed vertical hydraulic conductivity (K_v), vertical hydraulic gradient (VHG) and Darcian flux (DF) in the hyporheic zone were estimated at 61 locations along a channel bend of the Beiluo River during July 2015 and January 2016. All the streambed attributes showed great spatial variability along the channel bend. Both upward fluxes and downward fluxes occurred during the two test periods, most of studied stream sections were controlled by downwelling, indicating stream water discharge into the subsurface. The average downward flux was higher at the downstream side than at the upstream side of the channel bend, especially in July 2015. The distribution of streambed sediment grain size has a significant influence on the variability of K_v; high percentages of silt and clay sediments generally lead to low K_v values. Higher K_v at the depositional left bank at the upstream site shifted toward the erosional right bank at the downstream site, with K_v values positively correlated with the water depth. This study suggested that the variabilities of K_v and VHG were influenced by the stream geomorphology and that the distribution of K_v was inversely related, to a certain extent, to the distribution of VHG across the channel bend. K_v and VHG were found to have opposite effects on the DF, and the close relationship between K_v and DF indicated that the water fluxes were mainly controlled by K_v.

The mineralogical indices, e.g., Quartz Index (QI), Carbonate Index (CI), Mafic Index (MI) for ASTER multispectral thermal infrared (TIR) data have been applied to various geological materials. The indices are proved to be robust in extracting geological information at the local scale. Considering the relatively narrow spatial coverage of each ASTER scene compared to LANDSAT, many scenes are needed when mosaicking the images to be mapped at regional scales. We develop a system to search ASTER data for a target area given the vast and expanding ASTER data archive. The data is then conditioned, prioritized, and the indices are calculated before finally mosaicking the imagery. The maps of the indices covering the very wide region of the central Tibetan Plateau are produced with this system. The characteristic features of the indices relating to their geology in the study area are analyzed and discussed. Many interesting lithological and structural information that are not currently well understood in the central Tibetan Plateau, the highest and most extensive plateau in the world, with an average elevation of over 4,500 meters above sea level, for example, distributions of the mafic-ultramafic rocks along the suture zones, the quarzitic and marine sedimentology accreted to the Eurasian continent and sulfate layers related to the Tethys and neo-Tethys geological setting can be retrieved from the processed ASTER images.

All transmission disease depends on the transmission opportunity or medium like humans in COVID-19. Due to globalization and regular movement of people from one country to another, spread of COVID 19 reached to 208 countries till May 10, 2020. For any society health is major concern for humanity as well as administration. Any pandemic is declared as and when it reached at a particular severity level and control vice versa. So, we have continued the daily COVID 19 cases analysis and segregated till May 10, 2020. We have included at least 25 countries for the analysis purpose due to limitation of number of observations in the analysis. Maximum number of day’s data available for China is for 100 days, followed by Iran for 81 days, minimum number of days data is for 16 days for Western Sahara and Tajikistan.

The Sun is a huge gaseous body. However, we cannot observe events in the inner Sun due to the convection zone opacity according to previous models. Therefore, the flares originate from the front surface of the Sun. But the current study relied on the distance distribution of X-Ray solar flares, which concluded that the inner layers have much lower opacity than expected. It is even less than what was expected by the latest models based on helioseismology. This means that the flares may originate from the solar interior or solar core, and perhaps from the backside surface, and even appear to us from the frontside surface. Which the re-estimate and correct the currently listed solar flare’s location is needed. Additionally, the flare’s distance illustrations the solar interior layers and appears their boundaries from the core to the photosphere. This method allows us to monitor the variation of the core’s radius with time. The model of the flare’s distance has been developed in current study. But this needs to redevelopment after re-estimating the solar flares locations.

As one of the typical deposits in Sichuan-Yunnan-Guizhou Pb-Zn metallogenic province, the Daliangzi Pb-Zn deposit has a close genetic relation with the structural system of “black/fracture zone” formed under the action of NWW-approx. EW strike-slip structures in the metallogenic province, but the mechanism of rock and ore-controlling action of the structural system remains unclear. Based on detailed analysis of tectonite-mineralized alteration lithofacies of R1 “black/fracture zone”, the tectonite-mineralized alteration lithofacies zones can be divided into 4 types in succession outward from the Pb-Zn mineralization center, i.e., ① brecciated and stockwork-like Pb-Zn mineralization-complex breccia facies zone, ② stockwork-like Pb-Zn mineralization-simple breccia and cataclasite facies zone, ③ veined pyrite-sulfide-dolomitic cataclasite facies zone, and ④ fine-veined calcite-black carbonized dolomite facies zone; Cl- and SO42--rich high-temperature oxidizing ore-bearing fluid mixes with reducing fluid in Zone ① while migration and precipitation occur in Zone ④. With the evolution of ore-forming fluid, the homogenization temperature decreases from Zone ① to Zone ④, the salinity increases from Zone ① to Zone ② and then decreases to Zones ③ and ④, and the fluid density has little change on the whole; the contents of Zn, Pb, Cu, Ga, Ge, Cd, Ag, and other metallogenic elements, the Zn/Pb ratio, and the CaO/MgO mole ratio decrease gradually from Zone ① to Zone ④; and REE fractionation, calcilization, silicification, and pyritization enhance gradually from Zone ① to Zone ④. This series of changes are the product of diapirism (cryptoexplosion) of strike-slip structures and “black/fracture zone”, among which the second-order structures (F5, F100, and other faults) derived from NWW-approx. EW striking dextral shear-tension faults F1 and F15 control the brecciated and stockwork-like Pb-Zn mineralized complex breccia facies zones and the stockwork-like Pb-Zn mineralized simple breccia and cataclasite facies zones. Therefore, this paper establishes the zoning mode of tectonite-mineralized alteration lithofacies of “black/fracture zone” and proposes that Zones ① and ② are important prospecting criteria. conclusions.

The image performance of acoustic and ultrasound sensors depends on several fundamental parameters such as depth of focus or spatial resolution. There are currently two different type of acoustic diffractive lenses: those which form a diffraction-limited spot with a shallow depth of focus (zone plates) and lenses which form an extended focus (quasi-Bessel beams). In this paper, we investigate a pupil-masked Soret zone plate which allows the tunability of a normalized angular spectrum. It is shown that the depth of focus and the spatial resolution can be modified, without changing the lens structure, by choosing the size of the amplitude pupil mask. This effect is based on the transformation of spherically converging waves into quasi-conical waves, due to the apodization of the central part of the zone plate. The theoretical analysis is verified with both numerical simulations and experimental measurements. A Soret zone plate immersed in water with D/2F=2.5 and F=4.5$\lambda$, changes its depth of focus from 2.84$\lambda$ to 5.9$\lambda$ and the spatial resolution increases from 0.81$\lambda$ to 0.64$\lambda$ at a frequency of 250 kHz, by modifying the pupil mask dimensions of the Soret zone plate.

A discharge mixing zone (DMZ) is a defined geographical area or volume of water in the receiving environment of a discharge where initial dilution of the effluent occurs and where exceedance of water quality criteria may be permitted. DMZs are essential to inform determination of discharge consent conditions and an important element of risk management frameworks to reduce any effects of the discharges on the environment and human health. In this review, we describe the principles and technical application of DMZs. We present an overview of the physical processes that govern the dispersion and dilution of wastewater discharges and the fate of contaminants in coastal environments and define key criteria for determining the size of DMZs. We summarize DMZ requirements in international legislation and guidance and exemplify their application to different types of discharges by means of case studies. The selected case studies illustrate different modelling tools for defining DMZs and different monitoring approaches to assess their effectiveness in achieving ecological and human health objectives.

As the search for exoplanets continues, more are being discovered orbiting Red Giant stars. We use current data from the NASA Exoplanet Archive to investigate planet distribution around Red Giant stars and their presence in the host’s habitable zone. As well, we explore the distribution of planet mass and orbital semi major axis for evolved stars with increasing stellar radii. We found 9 Red Giant-hosted exoplanets, and 21 Subgiant-hosted exoplanets to be in the optimistically calculated habitable zone, 5 and 17 of which are in a more conservatively calculated habitable zone. All the planets detected within their habitable zone orbit stars that are in early stages of evolution. We believe that with more powerful instrumentation, more habitable planets may be found around stars that are in later stages of evolution.

The study compared antibacterial potential of hydrolysates of casein and alpha-lactalbumin from cow and goat milk on diarrhea-causing Escherichia coli and Staphylococcus aureus. Milk samples were aseptically obtained from lactating cows and goats. The samples were skimmed; casein was isolated using acetic acid and alpha-lactalbumin by filtrate thermoprecipitation at 75 °C. 50% of each isolate was reconstituted in a buffer and hydrolyzed with papain at 55 °C for 2 hours. The hydrolysates were heated to 75 °C to inactivate papain, cooled and their antibacterial activity determined by disc diffusion method. Results showed alpha-lactalbumins had higher degrees of hydrolysis and antibacterial activity than caseins; goat alpha-lactalbumin had the highest antibacterial activity with mean inhibition zones of 19.60 mm and 19.50 mm on E. coli and S. aureus. Cow alpha-lactalbumin inhibited E. coli more than S. aureus with inhibition zones of 16.80 mm and 12.50 mm. Cow and goat milk casein hydrolysates inhibited E. coli with mean inhibition zones of 8.00 mm and 10.90 mm and inhibited S. aureus with inhibition zones of 4.13 mm and 1.90 mm respectively. The research showed that the milk hydrolysates can be a source of antibiotics for diarrhea treatment. Research should be done to establish the peptide fractions associated with the observed bioactivity.

The Doig Phosphate Zone (DPZ) is a phosphate-bearing marine unit located at the base of the Doig Formation, in the Triassic section of the Western Canada Sedimentary Basin. The DPZ has a maximum thickness of 90 m and extends across northeastern British Columbia and western central Alberta. In this study we characterize the significance and interpret the origin of apatite in the DPZ, through mineralogical and geochemical analyses, thin section study and field emission-scanning electron microscopy. The occurrence of apatite in the DPZ is not evenly distributed, but restricted to discrete 10 to 20 cm thick beds, located near the base of the DPZ. Phosphorites are of two types: grainstones composed primarily of unconformity-bounded coated grains, and intraclastic phosphorites composed of detrital silt-sized grains and apatite coated grains in a cryptocrystalline phosphatic matrix. The phosphorite beds are records of stratigraphic condensation due to low detrital input during transgression. The erosionally-truncated phosphatic coated grains and intraclasts are interpreted to be a result of various phases of phosphatization, exhumation, erosion reworking, winnowing and redeposition in alternating quiescence and storms or bottom currents. The abundance of pyrite and chalcophile trace elements, as well as the low concentration of proxy elements for organic matter productivity and preservation, are further evidences of stratigraphic condensation, with sulfidic pore water development and extensive organic recycling promoted by biological activity during the long exposure times. The phosphorites were formed under oxygenated water conditions, as suggested by the depletion in Ce and presence of a diverse benthic fauna.

Agricultural activities within watersheds can have negative effects on river ecosystems, but numerous conservation practices can be implemented that reduce soil erosion, increase water infiltration, slow runoff, and improve soil quality. Our study focused on analyzing overall stream health (instream and riparian physical, instream biological) at 56 stream sites within an agricultural watershed (83,000 hectares, 70% croplands and rangelands) with a 30+-year history of targeted conservation practices to protect local water resources of importance for tourism and recreation. After implementation of >900 best management practices (BMPs) over the last 20 years in the study subwatersheds, only 20% of the stream sites examined exhibited good stream health and 40% were in poor condition, based on a combination of instream and riparian factors and aquatic community integrity. Time since implementation, location, and total coverage of BMPs within the relatively large subwatersheds all may have contributed to the apparent limited effectiveness of these conservation management practices toward producing observable improvements in stream health to date. Many indicators of stream health (e.g., fine sediments, sediment embeddedness, fish biotic integrity) differed significantly among subwatersheds, but those differences could not be explained by differences in numbers or coverages of BMPs in those subwatersheds. Longitudinal stream health patterns were similar among subwatersheds (moderate health in headwaters, poor in mid-reaches, good in lower reaches), likely due, in part, to similarities in locations of spring discharges and channel instability. New rules protecting stream riparia, maintenance of existing BMPs, and future BMPs targeting remaining problem areas should lead to improving stream health in this large watershed.

The highly adaptable parasite Trypanosoma cruzi undergoes complex developmental stages to exploit host organisms effectively. Each stage involves the expression of specific proteins and precise intracellular structural organization. These morphological changes depend on key structures that control intracellular components’ growth and redistribution. In trypanosomatids, the flagellar attachment zone (FAZ) connects the flagellum to the cell body and plays a pivotal role in cell expansion and structural rearrangement. While FAZ proteins are well-studied in other trypanosomatids, there is limited knowledge about specific components, organization, and function in T. cruzi. This study employed the CRISPR/Cas9 system to label endogenous genes and conduct deletions to characterize FAZ-specific proteins during epimastigote cell division and metacyclogenesis. In T. cruzi, these proteins exhibited distinct organization compared to counterparts in T. brucei. TcGP72 is anchored to the flagellar membrane, while TcFLA-1BP is anchored to the membrane lining the cell body. We identified unique features in the organization and function of the FAZ in T. cruzi compared to other trypanosomatids. Deleting these proteins had varying effects on intracellular structures, cytokinesis, and metacyclogenesis. This study reveals specific variations that directly impact the success of cell division and differentiation of this parasite.

Wildland-Urban Interfaces (W-UI) are at high risk of wildfires. Defensible spaces and home ignition zones are the two main aspects to protect lives and livelihoods of W-UI in the United States, Canada and Australia. The different part of the world has different rules and regulations for W-UI land management. We have discussed the defensible spaces in fire-prone areas, current ignition zone distances from structures, building materials, architectural design, the fire resistance trees, ground cover, landscaping and some other precautions to save lives and assets in the prominent fire-prone zones for three different countries (United States, Canada and Australia) of the world.

Optical switches are a key element in modern network communications. We present the results of experimental verification of a new theoretical concept proposed earlier for a full-optical wavelength-selective dual-channel switch based on the photonic hook effect, which is free from using any micro-mechanical devices or nonlinear materials. A large-scale laboratory prototype of such a device based on an off-axis Wood zone plate is considered and its main parameters in the millimeter wavelength range are investigated On the basis of the experiments, we show that the optical isolation of switched channels for a switch based on an off-axis zone plate can achieve 15 dB at a frequency difference of 25 GHz in frequency range from 93 to 136 GHz. Given the scaling, these results can be transferred to another range, including the optical one.

The importance of conflict analysis and safety considerations during work zone intervals at signalized intersections cannot be overstated, as these periods pose unique challenges and safety risks for both motorists and pedestrians. Work zones introduce temporary changes to traffic patterns, lane configurations, and signal timings, which can disrupt the flow of traffic and increase the likelihood of conflicts between vehicles and pedestrians. By conducting comprehensive conflict analysis, it is possible to identify potential conflict points, such as merging areas, pedestrian crossings, and lane transitions, and implement targeted safety measures to mitigate risks. Additionally, considering safety considerations during work zone intervals is paramount to safeguarding the well-being of road users and minimizing the occurrence of conflicts or collisions. Measures such as enhanced signage, temporary traffic control devices, and increased enforcement efforts can help promote compliance with traffic regulations and ensure the safe passage of vehicles and pedestrians through work zones. This study investigates the dynamics of traffic behavior and safety implications within work zones at signalized intersections, aiming to address key challenges and enhance intersection management strategies. Through comprehensive analysis, varying frequencies of Vehicle-to-Vehicle (V2V) conflicts were observed across different movement directions, with significant occurrences identified in specific phases of the traffic signal cycle. Specifically, 69 V2V conflicts in phase #1, 181 in phase #2, 31 in phase #3, 207 in phase #4, 1 in phase #5, 274 in phase #6, 93 in phase #7, and 186 in phase #8 were recorded. Furthermore, the examination of Vehicle-to-Pedestrian (V2P) conflicts underscored the importance of prioritizing pedestrian safety, with notable occurrences observed in phases associated with pedestrian crossing movements. Meanwhile, despite the closure of left-turn movements, instances of red light running persisted, with 69 red light running events in phase #1, 181 in phase #2, 31 in phase #3, 207 in phase #4, 1 in phase #5, 274 in phase #6, 93 in phase #7, and 186 in phase #8.To mitigate these safety concerns during work zone intervals, proactive measures are essential. Strategies include improving communication through clear signage and advanced warning systems, enhancing enforcement efforts with red light cameras and increased police presence, and investing in infrastructure improvements such as temporary pedestrian facilities. Integration of real-time data from sensors, particularly LiDAR technology, offers significant advantages in detecting conflicts and red light runners during work zone intervals. LiDAR's precise, real-time data on vehicle and pedestrian movements, combined with its 360-degree coverage and high spatial resolution, facilitates accurate detection and tracking of potential conflict scenarios, contributing to enhanced intersection safety and traffic management efficiency. This study endeavored to conduct a traffic safety analysis during work zone intervals at a signalized intersection in Baltimore City, known for its high rate of traffic crashes, utilizing LiDAR sensor technology.

Population concentration in cities brings new risks as an increase in pollution, which causes urban health problems. In order to address this problem, traffic reduction measures are being implemented, as pedestrianization areas and the definition of Low Emissions Zones (LEZ). When the effectiveness of these types of measures is in doubt, smart city tools provide data that can be used to scientifically asses their impact. This article analyzes the situation of Madrid Central (Spain), a LEZ subject to controversy. We apply statistical and regression analyses to evaluate the effectiveness of this measure to reduce air pollution and outdoor noise. According to the results, this LEZ was able to significantly reduce NO$_2$, PM$_{2.5}$, and PM$_{10}$ concentration locally, having the same positive impact in the rest of the city. In terms of noise, this measure is able to mitigate background noise levels generated by the road traffic.

The aim of this study, therefore, provides information about Aflatoxin levels in raw cow’s milk in Injibara Town of Awi Administrative zone by using HPLC-FLD. A good linearity of standard calibration was found for AFM1 at a range of 0.5–7 µg/L. Regression coefficient (R2) values were 0.9999, whereas slope and intercept were 2.5278 and 0.1012, respectively. The average recoveries for the spiked samples were range from76.62– 90.98 % and the RSD values ranged between 2.55–7.36 %. The results showed that 15 % of samples (3 out of 20) were contaminated with AFM1 in the range of 0.046–0.22 µg/L. The average contamination level was 0.121 µg/L. The determined mean values of AFM1 in the collected milk samples were above the standard limit of the European Commission and lower than the level established by United States regulations. Further monitoring of Aflatoxin in milk samples from different regions of the country is justified to conclusively determine the actual safe/risks and possibly low Aflatoxins-risk milk production areas.

The Konya Closed Basin (Quaternary, Central Turkey) is a graben basin which expands toward the east-west and it is controlled by faults on three sides: The Konya fault zone in the west, the Divanlar fault zone in the east and the Karaömerler fault zone in the north. Calcretes developed in relation to fault systems in the Konya region are concentrated in areas where faults cut Quaternary aged terrestrial deposits. In this study, it is aimed to elucidate the deposition conditions, geochemistry and age (with ESR method) of the calcareous deposits associated with faults in the Konya Closed Basin. Calcretes in the region existing as coatings, dust, nodules and layers are in the form of dolocrete and clayey calcrete. Dolocretes were deposited in the Quaternary terrestrial sediments on the ophiolitic rocks and geochemical data point to an ultramafic source. Bacterial community, clay, quartz minerals and calcite cement are observed in the calcretes formed in areas with limestone basement. According to the results of ICP-MS analysis of samples taken from Konya calcretes, the %MgO contents are between 0.99 and 7.7; CaO%: between 34.71 and 50.71; %SiO2 between 3.22 and 20.59. %MgO in dolocretes are between 11.65 and 21.01; %CaO between 8.44 and 29.57; %SiO2 values between 4.48 and 9.17 The δ13C and δ18O isotope values of calcretes range from -3.87 to -7.62 and from -3.62 to -7.45 respectfully. Average δ13C values indicate that calcrete formation took place under pedogenic condition or in shallow groundwater. The calcretes deposited in 3 locations around the city of Konya (on the Konya fault zone) were dated by using the Electron Spin Resonance (ESR) method and ages between 217.47 and 389.85 ky were obtained. The calcrete samples taken from the fault planes (dip-slip normal fault bordering the Upper Cretaceous Ophiolitic Mélange and the Quaternary Karahüyük Formation) gave a relative age for faulting as being 292.86 ky. This first dating study conducted in the Konya Fault Zone has provided important clues to elucidate the formation history of Konya Closed Basin (KCB) and the paleo-seismological past of Konya.

Both sand and fly ash were found to be promising for phosphorus removal in bioretention systems. However, nutrient removal in bioretention systems with sand, soil and fly ash was still uncertain due to a lack of data about the influence of layer structure and submerged zone. In this study, a mixture with sand, soil and fly ash (1:1:1) was selected as the base in bioretention systems with different packed layer structures and heights of submerged zone. The comparison of multi-layered structure with mixed structure implied that the used bioretention system with multi-layered structure was superior to that with mixed structure for nitrogen and phosphorus removal. The investigation of the influence of submerged zones on nutrient removal indicated that the submerged zone could significantly improve nitrate removal efficiency with 67.52%-86.32%, while sharply reduce the removal of ammonia nitrogen (from 95.15% to 51.81%) and TP (from 88.66% to 44.50%). Overall evaluation of the effect of packed layer structures and submerged zones suggested that the bioretention system with multi-layered structure at the height of submerged zone at 20-40cm was the most satisfactory, due to its microbial environment.

El Olivo Cave (Pruvia de Arriba, Llanera, Asturias, Spain) is a small karst cave located in the Aboño River basin and formed in the Cretaceous limestone of the Mesozoic cover of the Cantabrian Mountains (north of the Iberian Peninsula). It contains an important upper Pleistocene sedimen-tary, archaeological and paleontological record, with abundant technological evidence and faunal remains. The archaeological record shows a first occupation that could correspond to the Middle Paleolithic and a second occupation in the Middle Magdalenian. The stratigraphic sequence inside and outside the cave was studied with geoarchaeological methodology. In this paper, the lithostratigraphic sequence is analyzed and the data from the granulometric, mineralogical, edaphological and radiometric analyses are presented. The results of these analyses enable an accurate interpretation of both the lithostratigraphy of the deposit as well as the processes re-sponsible for its formation and subsequent evolution. The available numerical dates allow us to locate the first sedimentation episode in the cave in OIS 7a, in the Middle Pleistocene, the base of the outer fluvial sedimentation in the cold OIS 3a stage of the Upper Pleistocene and the Magdalenian occupation in the Last Glacial Maximum (OIS 2) at the end of the Late Pleistocene.

Monitoring and maintenance of cracked structures are generally done using structural integrity assessments. The plastic zone (PZ) crack path (CP) criteria state that a crack grows in the direction when the radius of the plastic zone ahead of the crack tip reaches a minimum value. The PZ can be evaluated using Stress intensity factors (SIF). The SIFs under mixed-mode loading were extracted from literature from three samples: two SENT samples made from polycarbonate and one modified C(T) sample made from low-carbon steel. In addition, the CP angle was evaluated for the W and R-criteria. It was found that both can predict the CP for lateral cracks in both tested materials and monotonic and cyclic load when the mode-mixity does not change considerably from one crack length to the next one or goes beyond 0.2. Moreover, the R-criterion exhibited an error as high as 1.7%, whereas the W-criterion showed a 6% error on the last crack length for the low carbon steel sample under cyclic load, which had a 100% increase in mode-mixity. Finally, the applicability of LEFM is checked, while the CP is sought by finding the size of the PZ.

Urban environments are frequently populated by different insect species. Some of them are very beautiful and appealing to the people around them, such as ladybugs and butterflies, while some others are molestants and even dangerous to public health. Mosquitoes often inhabit urban environments by staying close to their hosts (humans, birds, etc.), while phytophagous species such as stinkbugs find hosts among ornamental plants and shelters during the winter around humans. This article describes the early discoveries and distribution of two invasive mosquito species, Aedes albopictus, and Ae. japonicus (Diptera: Culicidae), which were recorded in Serbia in 2009 and 2018, respectively. Both species are important for human health, due to their nuisance behavior and because they are vectors of many viruses. On the other hand, in 2015 and 2008, two invasive stinkbug species, Halyomorpha halys and Nezara viridula (Hemiptera: Pentatomidae) were observed to spread, respectively. Since then, these species have disrupted human population in urban areas, but also damaged a range of crops and ornamental plants. All species have been monitored in the territory of Serbia, and establishment and distribution have been confirmed so far.

Understanding swash zone dynamics is of crucial importance for coastal management as the swash motion, consisting of the uprush of the wave on the beach face and the subsequent downrush, is responsible for driving changes the beach morphology trough sediment exchanges between the sub-aerial and sub-aqueous beach. Improved understanding of the probabilistic characteristics of these motions has the potential to allow coastal engineers to develop improved sediment transport models which, in turn, can be further developed into coastal management tools. In this paper, novel descriptors of swash motions are obtained by combining field data and statistical modelling. Our results indicate that the probability distribution function (PDF) of shoreline height (p(ζ)) and trough-to-peak swash heights (p(ρ)) measured at a high energy, sandy beach were both inherently multimodal. Based on the observed multimodality of these PDFs, Gaussian Mixtures are shown to be the best method to statistically model them. Further, our results show that both offshore and surf zone dynamics are responsible for driving swash zone dynamics, which indicates unsaturated swash. The novel methods and results developed in this paper, both data collection and analysis, could aid coastal managers to develop improved swash zone models in the future.

Growing crystals of nickel niobate (NiNb2O6), we noticed that changing growth conditions allowed our material to enter different areas of the phase diagram. In particular, we found that excess material accumulated within and above the liquid zone. Analysis showed that this was an unincorporated constituent. Changing the ratio of the constituent oxides - an excess of ~4% of either NiO or Nb2O5 gave us the opportunity to investigate changes in zone stability, melting temperature and quality of the resulting crystal. We found that a small excess of nickel oxide decreases the melting temperature significantly, and created the best pseudo-rutile NiNb2O6 crystal studied, while higher amounts of niobium oxide allowed us to stabilize the NiNb2O6 columbite phase. This research reinforces the idea that self-flux as a travelling solvent can significantly impact crystal growth parameters and quality.

Rockburst is a hazardous phenomenon in deep tunnels influenced by geological structural planes like faults, joints, and shear planes. Small-scale shear-plane-like structures have damaging impact on the boundaries of the tunnel, which accumulate high stresses. Such a shear plane was exposed in the side wall of the right headrace tunnel in the Neelum-Jehlum Hydropower Project. This project is constructed in the tectonically active Himalayas with high stress conditions. A shear plane combined with high stress conditions is very dangerous in deep excavations. The influence of a shear zone on rockburst occurrence near a tunnel is studied. The FLAC3D explicit code simulated the shear zone in the right tunnel, revealing that the stresses are concentrated near the shear zone, with no stress concentration in the left tunnel, which has neither shear zone nor rockburst. Rock mass was displaced near this shear zone even before excavation. Modeling results confirm that the side wall shear zone of the tunnel has a major influence on rockburst occurrence. A shear slip along this plane released huge amounts of energy, causing human fatalities and property damage. A numerical simulation validates the actual conditions and helps us understand the phenomenon of stress concentration near the shear zone and its impact during deep tunneling.

Any change in the amount and annual distribution of rainfall causes a major socioeconomic and environmental problem where rainfed agriculture is predominant. For that reason, the objective of this study was to determine the long-term variability and trends of precipitation in the Wabi Shebele River Basin (WSRB), Ethiopia. The basin was discretized into 7 local agroclimatic zones (ACZ) based on annual rainfall and elevation. In this study, the coefficient of variation (CV) was used to check the variability of rainfall and modified Mann-Kendall (MK) and Innovative Trend Analysis (ITA) methods were used to detect rainfall trends. For each ACZ, stations with long-term records and less than 10 % missing data were selected for further analysis. The mean annual rainfall in the basin ranges from 227.2 mm to 1047.4 mm. The study revealed most of the ACZs showed a very high variation in Belg/Spring season rainfall (CV % > 30) than Kiremt/Summer and annual rainfall. Trend analysis revealed that no uniform trend was detected among ACZs at each temporal scale. But, most ACZ in the arid and semi-arid areas showed a non-significant decreasing trend. In comparison, a similar result was observed using MK and ITA methods.

An equation for the Fermi level of impurity isotropic semiconductors is considered when the bottom of the conduction band and the top of the valence band are at the center of the first Brillouin zone. The energy of charge carriers in the valence and conduction bands of semiconductors is considered taking into account the real positions of the top of the valence band and the bottom of the conduction band in the first Brillouin zone. A universal equation for determining the Fermi levels of impurity isotropic semiconductors is presented.

Abstract Geographic Information System and Remote Sensing played an important role in analyzing environmental and socio-economic drivers that created favorable condition for malaria breeding as well as in identifying hazard and risk areas. This study gives great emphasis on mapping malaria hazard and risk areas in Gedio zone of SNNPs using geospatial technology. The study identifies two major drivers like Environmental (physical) factors: which provide for the endurance of mosquitoes and Socio-economic factors. The above data were presented and analyzed quantitatively. The content analysis shows that Malaria hazard prevalence areas were mapped based on the environmental factors which are potential of providing good environmental conditions for mosquito breeding. The hazard map was produced using elevation, slope, proximity to breeding sites, and soil type as the factors for breeding mosquitoes. The malaria hazard analysis of the Gedio zone revealed that from the total area, 9.83%, 35.29% is mapped as a very high and high-risk area, whereas, the remaining 38.73%, a 16.14%, and 0.01% were mapped as moderate, low, very low level of malaria hazard respectively. The total area of the study area more than 1/3rd of the area is identified as a very high and high malaria risk area while the rest 2/3rd of an area is considered as a moderate to very low hazard risk zone. Accordingly, very high malaria risk area is found around towns because of population density. Finally, I recommend that the concerned body should have to expand health center, creating awareness of society, especially around populated areas where the risk is high and environmental and individual sanitation can reduce the risk of malaria.

Crop residue burning produces a lot of polluting gases and fine particles, endangering human health, damaging soil structure, and causing fire accidents. In addition to the impact of residue burning on the local environment, pollutants can spread with the wind to more distant areas and impact the air quality of surrounding areas, especially cities. Nevertheless, a comparative analysis of the impact of two common residue burning parameters, the number of residue fire points and residue burned area, on urban air quality indicators has not been reported. In this study, the correlation between these two different residue burning parameters on air quality in Daqing City was investigated comparatively using the Visible Infrared Imaging Radiometer Suite (VIIRS) fire point product, the Moderate-resolution Imaging Spectroradiometer (MODIS) burned area product, and buffer zone analysis. The association between MODIS burned area products and air quality index (AQI) was found to be around 0.8, with a maximum of 0.816 at a buffer zone radius of 50 km. Meanwhile, it was found that the correlation between the number of residue fire points extracted from the VIIRS active fire products and air quality was above 0.6, again with a maximum of 0.745 at a buffer radius of 50 km. Within other levels of buffer zones, the correlation between residue burned area and AQI was consistently higher than that between residue fire points and AQI. By comparing the correlation between VIIRS fire points, MODIS burned area, and AQI with the concentration of each pollutant, we found that the correlation between residue burned area and AQI and the concentration of each pollutant is higher. MODIS burned area monitoring, on the other hand, detects changes in the time series of images taken by satellite at two transit moments to obtain the new burned area and cumulative burned area during this period, allowing the monitoring of fire traces caused by fire points at non-transit moments. From analyzing the correlation between residue fire points, residue burned area, and the concentration of each pollutant (PM2.5, PM10, CO, NO2, SO2, O3), we found significant correlations between residue burning and PM2.5, PM10, CO, and NO2 concentrations, with the highest correlation (R2) of 0.81 for PM2.5. Moreover, the correlation between residue burned area and PM2.5, PM10, CO, and NO2 concentrations was significantly higher than that between the number of residue fire points and their concentrations.

The coastal zone of the Valparaíso Region has been historically threatened by its natural and anthropogenic conditions, which demands efficient management for the adaptation and mitigation of the impacts that occur on the coast, especially in the face of the growing effects of climate change. As a contribution to decision makers in the development of strategic actions through adaptation plans, this study presents an approach to coastal vulnerability in the southern part of the region, applying the Coastal Vulnerability Index considering the variables geomorphology, coastal slope, changes in sea level, coastal erosion, tidal range, and wave height. The result illustrates a sectorization of the coast according to the degree of vulnerability, where the sectors formed by fine sandy beaches near river mouths and estuaries present greater risks to climatic events than those rocky stretches with medium-low cliffs.

The steady state tube furnace (SSTF) (ISO/TS 19700) was used to assess the effects altering the reaction zone of a flame had on smoke toxicity measurements. The gas inlet of the apparatus was modified to allow for a mixture of nitrogen and air to be introduced into the system. The volume of air used in each test remained at 2 L min-1 , and additional volumes of nitrogen were varied between tests altering the total volume of gas used in the primary gas inlet. The chosen conditions were representative of under-ventilated flaming by using a restricted oxygen environment. The research shows that the increase in volume flow of gas over a sample increased the smoke toxicity of the materials tested (CO and HCN). When increasing the volume of the primary air-flow through the tube furnace, the flow causes thinning of the flame zone in the apparatus and results in gaseous species spending less time in the reaction zone, resulting in less time available for chemical reactions to occur. This resulted in less complete combustion occurring, and hence an increased yield of measured products of incomplete combustion (CO and HCN), and a decreased yield of products of complete combustion (CO2).

The existence of the exclusion zone (EZ), a layer of water in which plastic microspheres are repelled from hydrophilic surfaces, has now been independently demonstrated by several groups. A better understanding of the mechanisms which generate EZs would help with understanding the possible importance of EZs in biology and in engineering applications such as filtration and microfluidics. Pollack theorizes that EZ water exists in a new phase which has a layered structure. We note several problems with Pollack's proposed structure, some of which were noted in the 1960's when a similar structure was proposed for ``polywater''. We argue that Schurr's diffusiophoresis based theory presents a compelling alternative explanation for the core EZ phenomena, although there remain other findings from Pollack's lab it does not explain. Among other things, Schurr's theory makes predictions about the growth of the EZ with time which have been confirmed by Florea et al.\ and others. In this work we also introduce and explore a novel hypothesis - that some aspects of EZ phenomena may be attributable to repulsive van der Waals forces. Finally, we touch on several possible confounding factors that make experimentation on EZs difficult, such as charged surface groups, dissolved solutes, and adsorbed nanobubbles.

We apply deep convolutional neural networks (CNNs) to estimate wave breaking type from close-range monochrome infrared imagery of the surf zone. Image features are extracted using six popular CNN architectures developed for generic image feature extraction. Logistic regression on these features is then used to classify breaker type. The six CNN-based models are compared without and with augmentation, a process that creates larger training datasets using random image transformations. The simplest model performs optimally, achieving average classification accuracies of 89% and 93%, without and with image augmentation respectively. Without augmentation, average classification accuracies vary substantially with CNN model. With augmentation, sensitivity to model choice is minimized. A class activation analysis reveals the relative importance of image features to a given classification. During its passage, the front face and crest of a spilling breaker are more important than the back face. Whereas for a plunging breaker, the crest and back face of the wave are most important. This suggests that CNN-based models utilize the distinctive `streak' temperature patterns observed on the back face of plunging breakers for classification.

In this review, we summarize recent progress in crystal growth and understanding the influence of crystal structure on the superconductivity in pure and Pb-doped Bi2Sr2CuOy (Bi-2201) materials belonging to the overdoped region of high temperature cuprate superconductors. The crystal growth of Bi-2201 superconductors faces challenges due to intricate materials chemistry and lack of knowledge of corresponding phase diagrams. Historically, a crucible-free floating zone method has emerged as the most promising growth approach for these materials, resulting in high-quality single crystals. This review outlines the described in the literature and the authors' synthesis endeavors, encompassing Pb-doped Bi-2201 crystals, detailed structural characterization of as-grown and post-growth annealed samples, and highlights optimal growth conditions that yield large-size, single-phase, and compositionally homogeneous Bi-2201 single crystals.

Background: Bacterial infections constantly have a large impact on public health, because of increased rates of resistance and reduced frequency of development of novel antibiotics. The utility of conventional antibiotics for treating bacterial infections has become increasingly challenging. The aim of the study was to assess the antibacterial effect of β -Lapachone, a novel synthetic compound. Methods: The antibacterial activity of the β -Lapachone compound was examined against laboratory strains by agar well diffusion method, minimal inhibitory concentration (MICs), and minimal bactericidal concentration (MBCs). Growth kinetics inhibition in presence of β -Lapachone on Staphylococcus aureus, Staphylococcus epidermidis and Pseudomonas aeruginosa (ATCC 27853) was assessed by MABA. Crystal violet blue assay was used for biofilm inhibition assays, biofilm eradication assay and for molecular modeling PyMOL was used. Results: β -Lapachone exhibited potent antimicrobial activity against laboratory strains of bacteria with MIC of 0.2 mM for S. saprophyticus and Staphylococcus aureus, and 0.04 mM for Staphylococcus epidermidis and Pseudomonas aeruginosa ATCC 27853. The inhibition of catalase enzyme was found to be the cause for its antibacterial activity. Molecular modeling predicted the binding of β -Lap at active site and heme binding site of catalase, KatA. The activity of some commercial antibiotics was enhanced in association with β -Lap. In addition, β -Lap inhibited the biofilm formation and eradicated the already formed and ultra-mature biofilms of aforesaid bacterial strains.

Using numerical software to establish a three-dimensional geological model of shield tunneling through fault fracture zones, considering the synchronous grouting effect at the shield tail, the disturbance of various geotechnical structures in the fault fracture zone under deep burial and high water pressure conditions is studied. According to the comparison between the numerical model analysis results and the on-site inspection results of the entire process of Shiziyang B3 section, synchronous grouting at the shield tail is the main reason for the changes in soil and water pressure in the fault fracture zone area. The soil and water pressure changes strongly during shield tunneling, and the maximum excess pore pressure value occurs when the shield tail passes. When the shield tunneling machine is far away, the soil and water stress shows a downward trend. The impact of synchronous grouting decreases with the increase of tunneling distance. Due to the difference in permeability, the variation law of pore pressure in the fault fracture zone is significantly different from the original rock, leading to a faster increase in pore pressure in the fracture zone area and a wider range of influence.

Syros Island, Cyclades complex, central Aegean Sea, Greece, is a prime locality for the study of processes active in deep levels of orogens and is world famous for its exceptionally well preserved glaucophane schist-to eclogite-facies lithologies. Glaucophane schists and eclogites are witnesses of one of the fundamental tectonic processes operating on planet Earth. Results of geological research on Syros have contributed a lot to our present understanding of why and how these processes work that make oceans disappear, how mountain ranges can start to form, how magma chambers form to feed volcanoes, how subduction mechanisms can trigger earthquakes and lead to tsunamis, and a series of other spectacular or very impressive phenomena which have been observed and studied throughout the earth s window offered in that particular place of the world. The description, interpretation and evaluation of the important geological heritage of Syros, in combination with a preliminary SWOT analysis, showed the geotourism potential of the region. The results of this paper are intended to constitute a valuable tool for enhancing and raising awareness of the geological heritage of the island of Syros, with regard to the added value activities to be developed on a sustainable basis.

Adding a submerged zone (SZ) is deemed to promote denitrification during dry periods and thus improve NO3--N removal efficiency of a bioretention system. However, few studies had investigated the variation of nitrogen concentration in the SZ during dry periods and evaluated the effect of the variation on nitrogen removal of the bioretention system. Based on the experiment in a mesocosm bioretetion system with SZ, this study investigated the variation of nitrogen concentration of the system under 17 consecutive cycles of wet and dry alternation with varied rainfall amount, influent nitrogen concentration and antecedent dry periods (ADP). The results indicated that (1) during the dry periods, NH4+-N concentrations in SZ showed an exponential decline trend, decreasing by 50% in 12.9 ± 7.3 hours; while NO3--N concentrations showed an inverse S-shape decline trend, decreasing by 50% in 18.8 ± 6.4 hours; (2) during the wet periods, NO3--N concentration in the effluent showed an S-shape upward trend; and at the early stage of the wet periods, the concentration was relatively low and significantly correlated with ADP, while the corresponding volume of the effluent was significantly correlated with the SZ depth; (3) in the whole experiment, the contribution of nitrogen decrease in SZ during dry periods to NH4+-N and NO3--N removal accounted for 12% and 92%, respectively; and the decrease of NO3--N in SZ during the dry period was correlated with the influent concentration in the wet period and the length of the dry period.

The diagnostics of natural landscapes geoecological state in the course of the permafrost zone economic development should be based on the assessment of the destructive cryogenic processes formation. It is expedient to consider it in terms of landscapes resistance to cryogenic processes increase. The choice of lithocryogenic stability parameters is substantiated. These are: permafrost distribution over the area, its annual mean temperature and ice content, protective properties of the vegetation and etc. Cryogenic processes activation is estimated with regard to their area, development rate and attenuation, natural landscapes damage, hazard for engineering facilities operation. The assessment procedure, and the way of improving expert numerical scores are shown. At Geography Faculty of Lomonosov Moscow State University, the authors have developed a number of the approved methods of making evaluation maps of different scales applying the methods of landscape indication, modern methods of space images decoding, methods of expert scores, the method statistical calculations and methods of spatial GIS-analysis. The technique of Atlas geo-information mapping on the landscape basis has been introduced in seven atlases at scales from 1:3 000 000 to 1:20 000 000. These maps are widely used in design and survey organizations and in education.

Sympatric distribution and temporal overlap of cryptic zooplankton species pose a challenge to the framework of the niche differentiation theory and the mechanisms allowing competitor coexistence. We applied the methods of phylogenetic analysis, DNA taxonomy and statistical analysis to study the temporal distribution patterns of cryptic B. calyciflorus species, an excellent model, in three lakes, and to explore the putative mechanisms for their seasonal succession and temporal overlap. The results showed that in the warm-temperate Lake Yunlong, B. fernandoi and B. calyciflorus s.s. underwent a seasonal succession, which was largely attributed to their differential adaptation to water temperature. In the subtropical Lake Jinghu, B. fernandoi, B. calyciflorus s.s. and B. dorcas exhibited both seasonal succession and temporal overlap. Seasonal successions were largely attributed to their differential adaptation to temperature, and temporal overlap resulted from their differential responses to algal food concentration. In the tropical Lake Jinniu, B. calyciflorus s.s. persisted throughout the year, and overlapped with B. dorcas for 5 months. Temporal overlap resulted from their differential responses to copepod predation. These results indicated that the temporal distribution pattern of cryptic B. calyciforus species and the mechanism allowing competitor coexistence vary with different climate zones.

The change of habitat pattern is one of the key factors affecting the survival of moose population. The study of habitat landscape pattern is the key to protect Chinese cold temperate forest moose population and monitor the global distribution of moose. By means of MaxEnt model, landscape index calculation and ecological risk assessment model, combined with field survey and infrared camera monitoring data from April 2014 to January 2023, the author evaluated the habitat suitability of moose population in Nanwenghe National Nature Reserve of the Great Khingan Mountains, and divided the range of moose habitat based on the logical threshold of the model. The landscape pattern index of moose habitat was calculated by Fragstats software and a landscape ecological risk assessment model was established to analyze the landscape pattern and ecological risk dynamic changes of moose habitat in 2015 and 2020. The results showed that under the premise of global warming, the habitat landscape contagion index decreased by 4.53 and the split index increased by 4.86 from 2015 to 2020. In terms of ecological risk: the area of low ecological risk areas increased by 0.88%; the area of medium ecological risk areas decreased by 1.11%; and the area of higher ecological risk areas increased by 0.23%. The fragmentation risk of landscape pattern of moose habitat tends to increase, the preferred patch type is dispersed, the degree of aggregation is low, and the risk of patch type transformation increases. And the middle and high ecological risk areas are mainly concentrated in the river area and its nearby forests, showing a fine and scattered distribution. Under the interference of global warming and human activities, the fragmenta-tion trend of moose habitat in the study area is increasing, and the habitat quality is declining, which is likely to cause moose population migration. For this reason, the author believes that the whole cold temperate forest is likely to face the risk of increasing the transformation trend of dominant patch types in the cold temperate coniferous forest region mainly caused by global warming, resulting in an in-crease in the risk of habitat fragmentation. While the distribution range of moose is reduced, it has a significant impact on the diversity and ecological integrity of the whole cold temperate forest ecosystem. This study is helpful for human beings to strengthen their awareness of forest and river protection, avoid further intervention in more human activities, and formulate a reasonable plan for forest protec-tion and sustainable development in cold temperate zones. to provide theoretical reference for effective monitoring and protection of cold temperate forest and moose population dynamics.

Solar radiation is closely related to the energy buildings consume for cooling, heating, and lighting purposes. Glazing is the only material of the building envelope that transmits solar radiation and needs to be appropriately designed to reduce energy cㅈonsumption. Currently, smart glass technology is being actively investigated and developed for effective solar radiation control. Among the various types of smart glass, electrochromic glazing is one of the most promising technologies, as it can adjust transmittance on its own, has a wider transmittance range in both the clear and darkened states, and consumes less electricity. Considering the importance of solar radiation adjustment in electrochromic glazing technology, this study attempted to develop an optimal control method for electrochromic glazing. Toward this goal, the solar radiation incident on vertical surfaces and outdoor temperature conditions were controlled in three regions with different climatic characteristics, and the annual cooling, heating, and lighting loads, discomfort glare, and interior illumination were analyzed. This approach enabled the optimal conditions with respect to visual comfort to be determined. Subsequently, the EDPI (Energy and daylight performance index) was used to optimize control conditions for each region, thereby producing integrated evaluations from results with different units and properties. The proposed control method will be utilized to develop a control algorithm and a control system to reduce building energy consumption.

The road traffic injuries risk factors such as driving offenses and average speed are concerns for health organizations to reduce the number of injuries. Without any comprehensive view of each road, one cannot decide about the effective policy. In this manner, the data-driven policy will help to improve and assess the decisions. The count data near the road of two airports is surveyed for investigating the time-varying speed zones. The descriptive statistics, ANOVA, and functional data analysis were used. The hourly data of traffic counts for four different locations at the entrance of the two airports, international and domestics, were collected for one the year 2018 to 2019.The hourly pattern of driving offenses for each road was assessed and the to and from airport roads had different peaks (<0.05). The hour, weekdays, type of airport, direction and their interactions were statistically significant (<0.05) for the chance of driving offenses. The speed average during the day was statistically different (<0.5) by the number of different types of vehicles. The traffic count data is a great resource for decision making in safe driving subjects such as driving offenses. With functional data analysis, we can analyze them to get the most of the characteristics of this data. The airports are public places with high traffic demand in all countries that yields the different pattern of traffic transportation, therefore we extract the factors that affect the driving offenses. Finally, we conclude that conducting a time-varying speed zone near the airports seems vital.

Infection with the hepatitis B virus (HBV) is a public health problem in many parts of the world, due to its frequency, complications and socio-economic consequences. This study aimed to assess the seroprevalence of hepatitis B virus infection in rural areas and in urban areas. This cross-sectional study assessed the prevalence of HBV infection from 2015-2018 at CHR-Sokodé and USP of Ogaro. Biological data of 3000 participants (500 per year in each zone) enrolled and results of HBsAg were assessed during the study period. Female are represented 60% with average age comprised between [20, 29] years old. The high rate of participants enrolled (45.10%) are come for the monitoring of pregnancy. The prevalence of VHB during the study are 20.33% (610/3000), high prevalence (6.27%) and the means of VHB prevalence are shown in the age range between [30; 39] with 12.17% (365/3000) of female and 8.17% (235/3000) of male are positive after diagnostic detection of HBsAg (antigen of Hepatitis B virus). The prevalence of HBV in rural zone (Ogaro) are 5.23% and 15.07% in urban zone (Sokodé) and the high prevalence (17.50%) are shown in urban zone. The high prevalence of young suggests that some effort will be due to sensibilized young for HBV sexual transmission and the way of prevention. In addition, some research would be done in research of alternative therapy against this infection.

Ternate Island is a volcanic island resulting from the activity of the Gamalama Volcano which is located in the northern Maluku archipelago, Indonesia. Ternate Island is famous as the only island that produces special spices and is the zero point of the world's spice route because the main producer of cloves is here. As a small island, Ternate Island has several limitations including the availability of water resources. Given the scarcity of surface water on the island of Ternate, groundwater in shallow aquifers and deep aquifers is the main source of fresh water which is important for irrigation activities, tourism, services and supporting urban and industrial infrastructure, as well as drinking water needs for people who live densely and are concentrated in the east. and the southern part of the island which is now the city of Ternate. The phenomenon of groundwater utilization in Ternate City is generally massively carried out to support economic activities in the city of Ternate. The purpose of this study was to evaluate the potential and quality of groundwater resources which are an important part of water management on the island of Ternate by microzoning the quality of groundwater for the sustainability of the city which is famous as the world's spice city based on its groundwater potential. Determination of groundwater samples as many as 67 wells distributed on the island of Ternate, 58 well sample points were categorized as free aquifers (MA-SG) and 7 points of depressed aquifers (SB). Ternate island area of ​​102 km2 with volcanic geology in 3 rock categories. Geological distribution also affects the hydrogeological potential and groundwater quality on the island of Ternate. Piper's trilinear diagram and stiff diagram methods were adopted for the assessment of the main ion quality of groundwater and the distribution of groundwater potential was interpolated with cubic splines to obtain correlations between sample points based on basic parameters of volcanic hydrogeology. The total potential for groundwater recharge is 1,291 million m3/year, there are 5 groundwater quality zones spread among 67 sample points with 76% distribution of elements Calcium Bicarbonate (CaCO3), Sodium Bicarbonate (NaHCO₂), magnesium bicarbonate Mg(HCO3)2 and widely distributed on the island of ternate, while 25% magnesium chloride (MgCl2) and potassium chloride (KCL) are scattered locally on the island of ternate. On an ongoing basis the bicarbonate facies micro-zonation is hydrogeochemical with local flow interactions in volcanic deposits, where infiltration tends to be close to the groundwater sample point, while the chloride facies is a groundwater zone that is correlated with flow patterns from upstream to downstream and has interacted with magma or was intruded. seawater is characterized by high Ca and TDS.

Eight samples of limestones and marbles were studied by neutron diffraction to collect 2 Quantitative Texture (i.e., Crystallographic Preferred Orientations or CPO) of calcite deforming at 3 different depths in the crust. We studied the different Texture patterns developed in shear zones at 4 different depth and their influence on seismic anisotropies. Samples were collected in the French and 5 Italian Alps, Apennines, and Paleozoic Sardinian basement. They are characterized by isotropic to 6 highly anisotropic (e.g., mylonite shear zone) fabrics. Mylonite limestones occur as shear zone horizons 7 within the Cenozoic Southern Domain in Alpine thrust-and-fold belts (Italy), the Briançonnais domain 8 of the Western Alps (Italy-France border), the Sardinian Paleozoic back-thrusts or in the Austroalpine 9 intermediate units. The analyzed marbles were collected in the Carrara Marble, in the Austroalpine Units 10 in the Central (Mortirolo) and Western Alps (Valpelline). The temperature and depth of development of fabrics vary from < 100◦C, to 800◦C and depth from <10 km to about 30 km, corresponding from upper 12 to lower crust conditions. Quantitative Texture Analysis shows different types of patterns for calcite: 13 random to strongly textured. Textured types may be further separated in orthorhombic and monoclinic 14 (Types A and B), based on the angle defined with the mesoscopic fabrics. Seismic anisotropies were 15 calculated by homogenizing the single crystal elastic tensor, using the Orientation Distribution Function 16 calculated by the Quantitative Texture Analysis. The resulting P- and S-waves anisotropies show a wide 17 variability due to the textural types, temperature and pressure conditions, and dip of the shear planes.

Uzbekistan, as an emerging national economy, aims to attract foreign direct investment (FDI) to foster the development of its free economic zones (FEZs). While recent policy reforms have enhanced the country's appeal to investors and facilitated the inflow of international capital, challenges persist in attracting investment. This study employs an economic geographical approach to analyze and propose solutions to these obstacles. By examining the spatial patterns of FEZs and FDI through a comprehensive geographical lens, this research utilizes document analysis as an alternative to empirical analysis, considering the broader context rather than focusing on a specific FEZ. The findings reveal that the insufficiency of an innovation-driven environment, logistical systems, energy resource-related issues, among others, negatively impact the inflow of FDI into FEZs. Moreover, the study underscores the significance of economic geography in understanding these factors. Finally, relevant insights and recommendations are provided from an economic geographical perspective.

The merge areas of freeway work zones include relatively significant safety hazards that have continuously led to urgent safety issues to be solved by the management departments. In order to make up for the cumbersome process of independent identification of rear-end collision and lane change collision on complex road sections, an appropriate identification method of traffic conflicts in the merge area of freeway work zone was explored, this study collected vehicle running tracking data from the merge areas of multiple work zones, using an unmanned aerial vehicle video technique. Based on an inter-frame difference method and the principle of a spatio-temporal context visual tracking algorithm, the vehicles were detected and tracked, and the coordinate data of the vehicles in continuous motion were parsed using MATLAB extension tools. Based on the behavior characteristics of vehicle conflict avoidance, a new identification method for evading severe traffic conflicts is proposed according to the initial velocity, acceleration and accident rate of section traffic. Then, a statistical analysis was performed on the spatial distribution characteristics of the traffic conflicts in typical merge areas. The impacts of the road conditions in work zones, vehicle factors, and traffic flow factors on the traffic conflicts were analyzed. A binomial logistic model was established to identify the main influencing factors. The results show that in the merge area of the freeway work zone, there are serious traffic conflicts between vehicles in the following two situations: (Ⅰ) v∈[7,13.5] m/s and a∈[-3.96,-0.65]m/s2; and (Ⅱ) v∈[13.5,24.3] m/s, and a∈[-3.96,-1.57] m/s2. The probabilities of serious traffic conflicts in the first and last 25 m of the merge area are greater than those in the other sections. The smaller the space between the upstream work zone and the merge area, the greater the probability of serious traffic conflicts between vehicles. When the average vehicle speed is relatively high, the probability of serious conflicts is the highest, i.e., by a multiple of 5.95 from the baseline. Moreover, the probability of serious conflicts between vehicles is higher for larger vehicles, i.e., 4.765 times that for small vehicles. The research results can serve as a reference for freeway management departments to improve the safety levels of merge areas during road work. For example, the probability of serious conflicts can be effectively reduced by setting up reasonable speed limit signs in the work zone, increasing the spacing between work zone and merge area, and appropriately diverting large vehicles.

In response to the fire protection design challenges faced by the integrated station-city engineering under the new model of station-city fusion, such as large building volume, diverse traffic types, functional integration, spatial complexity, and inapplicable standards, this paper selects Chongqing East Station as a typical engineering case. The fire safety engineering methods and performance-based fire protection design ideas were used. The paper summarized the fire protection difficulties, such as multifunctional combination construction, large fire protection distance, large fire protection zoning area, long evacuation distance, and design of evacuation (quasi) safety zones. Combining with the actual situation of the engineering, this paper analyzed the basic technical measures taken to address these design challenges. By adopting the method of fire safety engineering, the safety of the design scheme is verified, which can provide a solution approach for the current fire protection design challenges in the integrated station-city engineering.

We aimed to investigate the ability of children aged 5–14 years old (preschoolers, primary schoolers, and preteens) to assess and anticipate time intervals. 287 Russian children aged 5–14 years old and 26 adults of control group participated in our study. The neuropsychological assessment, Wechsler Intelligence Scale for Children and a battery of time-related tests were applied. All groups of children overestimated the event’s duration, although the accuracy of the second estimations increased among the participants aged 6–8 years after a prompt was offered. A zone of proximal development for time anticipation task was detected for children aged 9-11 years, when the prompt could significantly improve the accuracy of time perception. The participants overestimated the duration of both upcoming and past events, with the degree of overestimation being found to be negatively correlated with age. Further, a higher degree of accuracy in terms of time estimation was found to be correlated with higher scores on the attention and memory tests, and accuracy of time anticipation was associated with scores of praxis test.

Hydraulic fracturing for oil-gas and geothermal reservoir stimulation is closely related to the generation and propagation of Mode I crack. Nonlinear deformation due to rock heterogeneity occurs at such crack tip, which causes the fracture process zone (FPZ) to form before the crack propagates unsteadily. However, the relationship between the FPZ characteristics and rock heterogeneity still remain elusive. We used three rock types common in reservoir for experimental investigation, and each of them includes two subtypes with different heterogeneity due to grain size or microstructural characteristics. Drawing on the experiment results, we calculated the FPZ size in each cracked chevron notched Brazilian disk, and we reproduced the formation process of the FPZ in marble by discrete element method. We showed that strong heterogeneity is favorable to large FPZ size, can enhance the ability of crack generation and complicate crack morphology. Coupling the Weibull distribution with fracture mechanics, the dependence of the FPZ size on heterogeneity degree can be theoretically explained, which suggests that inherent heterogeneity of rocks set physical foundation for formation of FPZ. These findings can improve our recognition to formation mechanism of the Mode I crack and provide useful guidelines for evaluating reservoir fracability.

This study aims to determine the optimal configuration (position and operation duration) for wall mounted mechanical mixers based on the comparison of three-dimensional computational fluid dynamics (CFD) modelling results and physical data collected from the treatment plant. A three-dimensional model of anoxic zone 1, 2 and 3 of Northern Wastewater Treatment Plant (WWTP) located at Cairns Regional Council, Cairns, Queensland, Australia was developed and validated. The model was used to simulate the flow pattern of the WWTP and the simulation results are in good agreement with the physical data varying between 0% to 15% in key locations. The anoxic zones were subject to velocities less than the desired 0.3 metres per second however results for suspended solids concentration indicate that good mixing is being achieved. Results for suspended solids concentrations suggest that the anoxic zones are towards the upper limits recommended by literature for specific power dissipation. The duration for operation of mechanical mixers was investigated and identified that the duration could be reduced from 900 seconds down to 150 seconds. Alternative mixer positioning was also investigated and identified positioning which would increase the average flow velocity with decreased duration (150 seconds). The study identified that Council may achieve savings of $24,000 per year through optimisation of the mechanical mixers.

In the article, the authors presented the problem of the transition effect in bridge engineering, its causes, negative consequences, and suggested a solution involving the use of integral bridges with the embankment through a spatial bars structure using reinforced composite polymer material. Integral bridges are designed to collaborate with road or railway embankments in bearing loads. Additionally, their application minimizes maintenance and construction costs while enhancing durability. Current solutions in bridge engineering were described. It is predicted that the presented concept will reduce the amount of plastic waste and contribute to the long-term use of materials. The article emphasized the importance of sustainable development, recycling, and the potential application of substitute materials.

To achieve sustainable development during urbanization, construction waste is recycled for use as an aggregate in recycled concrete (RC). To determine the influence of the brick content in coarse recycled aggregates on the damage sustained by the resultant RC, the RC was first divided into seven phases: natural crushed stone, old gravel inside waste concrete, bricks, new mortar, old mortar on waste concrete surfaces, and new and old interface transition zones. The Monte Carlo method was then applied to establish a two-dimensional random aggregate model of the RC made with coarse brick aggregates. The ABAQUS software package was used to simulate a uniaxial compression test, the results of which were combined with those of a macro-test to determine the internal damage change rule of brick-containing RC. The stress–strain curves obtained from the simulation coincided well with that of the macroscopic tests. As the brick content increased, the damage zone inside the specimen and the number of microcracks increased. The stress concentration area decreased, as indicated by a lower compressive strength in the macro-test. The results indicate that higher brick contents in RC yield more initial damage inside the concrete and a lower compressive strength.

Background: Hypereosinophilic syndromes (HES) are a group of relatively rare disorders in which neurological manifestations are not uncommon including ischemic stroke. The hypothesized pathophysiological mechanisms are hypercoagulability, cardioembolism (mainly mediated by myocardial involvement) and damage to the endothelium. A variable ischemic pattern has been described, including an association of territorial and border zone ischemic stroke. Methods: Three patients who presented to our department with acute stroke were selected aiming to show these three different mechanisms inferred from the stroke pattern on brain Magnetic Resonance Imaging (MRI) and to simultaneously illustrate the three main causes of HES. Results and Discussion: The first patient is a 55-year-old man with an abrupt onset of aphasia due to an acute ischemic stroke involving the left parietal lobule and the angular gyrus; recent lab test had shown hypereosinophilia. An extensive workup excluded primary and secondary causes of hy-pereosinophilia so a diagnosis of idiopathic hypereosinophilia was formulated and he was treated with high doses of steroids. The second patient had severe hypereosinophilia and developed multiple small scattered ischemic lesions, mainly in watershed zones. The history of severe asthma and recurrent sinusitis supported the diagnosis of EGPA (Eosinophilic Granulomatosis with Polyangiitis); considering the severe clinical conditions and the presumptive role of hypereo-sinophilia in determining her symptoms, steroid treatment was promptly started, with good clinical response. The third patient also presented with multiple metachronous ischemic lesions, both in cortical and watershed distribution and marked eosinophilia; the diagnostic work-up found an ovarian cancer. She was treated with steroids and then underwent surgery and adjuvant chemotherapy. Conclusions: HES should be considered in stroke etiological evaluation, although it is a rare disorder, and border zones pattern on neuroimaging is quite suggestive. A thorough research of the sources of hypereosinophilia should be performed to select the appropriate therapy.

Background: Human papillomavirus is a common pathogen that infects the skin and mucosal epithelium, is transmitted sexually; causes condylomas or squamous cell carcinomas. Two (16 and 18) of the 150 HPV serotypes are oncogenic types. Studies have been done on the infection by oncogenic human papillomavirus 16/18 and associated factors are found to be very limited in Ethiopia. Objective: This study aimed to assess the prevalence of oncogenic human papillomavirus infection (HPV 16/18) and associated factors among women. Methods: An institutional-based cross-sectional study was conducted among 337 women screened for cervical cancer in two hospitals in East Gojjam Zone from February to April 2021 G.C. Four BSc-qualified nurses who worked in the chosen hospitals collected the data using pretested questionnaire and an HPV test (OncoE6TM Cervical Test) specific to HPV16/18 in cervical swabs. Descriptive analysis was performed to determine the prevalence and a multivariate logistic regression model was used to identify the associated factors of HPV16/18 infection. Finally, statistical significance was declared at P < 0.05.Results: The prevalence of HPV infection was 14.2% (95% CI: 10.7% -18.1%). The mean age of the respondents was 36.7±9.1 years. Women with the age group of 55-65 years (AOR = 7.91, 95% CI: 1.95-32.09), early initiation of sexual intercourse (AOR = 5.36, 95% CI: 1.58-18.13), history of sexually transmitted infection (STI) (AOR = 3.52, 95% CI: 1.27-9.72), human immunodeficiency virus (HIV) positive status (AOR = 6.8, 95% CI: 1.99-23.54), and number of lifetime sexual partners (AOR = 4.37, 95% CI: 1.15-17.3) were important independent factors associated with the presence of oncogenic HPV infection. Conclusion and Recommendation: We found a relatively low prevalence of high-risk HPV infection. Age, early initiation of sexual intercourse at less than 18 years, STI of women, being HIV seropositive, and a number of sexual partners were important factors for high-risk HPV infection. Women aged > 46 years, women with early initiation of sex, a history of STI, being HIV positive, and a history of multiple sexual partners should be encouraged to be screened and vaccinated for HPV infection. Wider-ranging studies are also needed in HPV-infected women in association with the cervical lesion.

β-Ga2O3 crystal have attracted great attentions in the fields of photonics and photoelectronics because of its ultra wide-band gap and high thermal conductivity. Here, pure β-Ga2O3 crystal was successfully grown by optical floating zone (OFZ) method, and used as saturable absorbers to realize a passively Q-switched all-solid-state 1μm laser for the first time. By placing the as-grown β-Ga2O3 crystal into the resonator of Nd:GYAP solid-state laser, a Q-switched pulses at the center wavelength of 1080.4 nm are generated under a output coupling of 10%. The maximum output power is 191.5 mW while the shortest pulse width is 606.54 ns, and the maximum repetition frequency is 344.06 kHz. The maximum pulse energy and peak power are 0.567 μJ and 0.93 W, respectively. Our experimental results show that β-Ga2O3 crystal has great potential in the development of all-solid-state 1μm pulsed laser.

There are different treatment options in modern dentistry for the replacement of lost dentition. Of these the most upcoming and acceptable treatment option is Dental implants. The common problem usually with immediate implant placement in the anterior region is the post-operative soft tissue contour as a part of the bone modelling during healing. Hurzeler et al in 2010 introduced a new technique called the “socket shield technique”. This technique has been used as an alternative treatment modality for immediate implant placement in the aesthetic zone.This review articles provides a detailed information regarding the clinical concept of Root membrane technique.

The Sol Hamed (SH) area is a part of the Arabian-Nubian Shield (ANS) ophiolites occurred within Onib-Sol Hamed suture zone in the southern Eastern Desert of Egypt. The ophiolitic assemblages in this area are represented by serpentinite, metagabbro and arc assemblages represented by metavolcanics. They later intruded by gabbroes and granites. Geochemically, the compatible trace elements (Cr=2426–2709 ppm, Ni=1657–2377 ppm and Co=117–167 ppm) enrichment in SH serpentinites indicate derivation from a depleted mantle peridotite source. They show affinity to the typical metamorphic peridotites. The normative compositions reflect harzburgitic mantle source. Their Al2O3 contents (0.05–1.02 wt. %) are akin to oceanic and active margin peridotites and Pan-African serpentinites. The Cr and TiO2 contents indicate supra-subduction zone (SSZ) environment. Their Al2O3/SiO2 and MgO/SiO2 ratios support the SSZ affinity and are similar to ANS peridotites with fore-arc setting. Moreover, their Al2O3 and CaO depletion is typical of fore-arc peridotites. Structurally, the area represents four deformational events can be well-known in the Neoproterozoic rocks (D1, D2, D3 and D4); D1: E–W thrust faults and related E–W (F1) folds; D2: NW–SE thrust faults and related NW–SE (F2) folds were formed; D3: conjugate NNW-trending sinistral and NNE-trending dextral transpression, as well as N–trending tight folds (F3) and D4: is E–W dextral strike-slip and dip-slip normal faults striking NNW–SSE to N–S and E–W may be related to Red Sea rifting. There are major three fault sets affected the area. The first set trend mainly NE-SW and is manifested in the volcanic-sedimentary assemblage and Gabal SH and have important role in mineralization. The second set trend E-W affecting all the basement rocks and disturbs the first fault set. The third set trend N-S affected all the rock units. Magnesite mineralization in SH serpentinites is cryptocrystalline formed due to hydrothermal alteration of the serpentinite host rocks. It is occur as snow-white veins and stock-works. These characteristics are typical of Kraubath type magnesite deposits. Gold mineralization is confined to malachite-bearing quartz veins, smoky quartz veins and alteration zones. Malachite-bearing quartz veins trending NW-SE cut through gabbroic rocks and exhibit mylonitic structure. They are fractured containing malachite and disseminated sulfide minerals. Smoky quartz veins trending NE-SW with SE steeply dipping intrude the meta-andesite. They are intensively sheared containing iron oxides in the fissures. The gold grades increase with arsenopyrite occurrences. On the other hand, the barren quartz veins are nearly vertical with E-W directions. Alteration zones with NW-SE trend and nearly vertical dip intrude metagabbros and metavolcanics. Hematite, limonite, goethite and fresh pyrite characterize these zones. They occur mainly neighboring the auriferous quartz veins.

In the northern Fennoscandian Shield, a vanadium mineralization occurs in the Paleoproterozoic Pechenga–Imandra-Varzuga (PIV) riftogenic structure. It is localized in sulfide ores hosted by sheared basic and ultrabasic metavolcanics in the Pyrrhotite Ravine and Bragino areas and was formed at the latest stages of the Lapland-Kola orogeny 1.90–1.86 Ga ago. An additional formation of vanadium minerals derived from contact metamorphism and metasomatism produced by the Devonian Khibiny alkaline massif in the Pyrrhotite Ravine area. Vanadium forms its own rare minerals (karelianite, coulsonite, kyzylkumite, goldmanite, mukhinite, etc.), as well as it can be an isomorphic admixture in rutile, ilmenite, crichtonite group, micas, chlorites, etc. Vanadium originated from two sources: (1) basic and ultrabasic volcanics initially enriched in vanadium and (2) metasomatizing fluids that circulated along shear zones. The crystallization of vanadium and vanadium-bearing minerals was accompanied by chromium and scandium mineralization. Vanadium mineralization in Paleoproterozoic formations throughout the world is briefly considered. The simultaneous development of vanadium, chromium and scandium mineralizations is a unique feature of the Kola sulfide ores. In other regions sulfide ores contain only two of these three mineralizations produced by one ore-forming process.

Calcium (Ca) is an essential element constituting sedimentary carbonate in subducting sediments. Ca isotopic characteristics of subduction-related rocks could provide insight into the behavior and budget of carbonate and carbon cycles in subduction zones, due to the distinctive δ^44/40Ca ranges of sedimentary carbonate with respect to the mantle. Here, we studied the Ca isotopic compositions of arc magmas from the Northern Luzon arc (NLA), which are evolved from a depleted mantle metasomatized by slab-derived fluids and sediment melts. The δ^44/40Ca values range from 0.76 ± 0.04‰ to 1.01 ± 0.03‰ and cover the typical ranges for bulk silica earth (BSE, ~ 0.94‰) and fresh mid-ocean ridge basalt (MORB, ~ 0.83‰). The Ca isotopes of NLA volcanics are not dominantly determined by the effects of mantle partial melting or fractional crystallization, nor significantly modified by secondary alteration. Instead, the δ^44/40Ca values of NLA volcanics are controlled by the subduction-related metasomatism. The metasomatism by slab-derived fluids (mainly expelled from altered oceanic crust, AOC) dramatically elevated the contents of fluid-mobile elements (e.g., Ba and Pb) with respect to fluid-immobile elements (e.g., Ce). This process, however, rarely modified the Ca isotopes, possibly ascribed to the δ^44/40Ca similarity between AOC and the depleted mantle. The δ^44/40Ca values significantly correlated with subduction indicators (e.g., Sr-Nd isotopes, Ba/Nb, Ce/Pb, and Nb/La), demonstrating the Ca isotopes of NLA volcanics are mainly controlled by the metasomatism of sediment melts subducting from the South China Sea (SCS). Based on the thermal structures and chemical compositions of sediments subducting into global trenches, we propose that carbonate Ca isotopic signals can only be observed in the arcs with high sedimentary Ca fluxes and temperature-pressure conditions well beyond the solidus of H₂O-saturated sediment melting, e.g., NLA, Nicaragua, Guatemala, Colombia, Peru, South Chile, North Vanuatu, New Zealand, and Kermadec. The absence of such signals in other arcs suggests either limited sedimentary fluxes or much of the subducting sedimentary carbonate has been survived during plate subduction to enter the deep mantle.

An effective empirical statistical method is developed to improve the process of mineral resource estimation of seabed polymetallic nodules and is applied to analyse the abundance of seabed polymetallic nodules in the Clarion Clipperton Zone (CCZ). The newly proposed method is based on three hypotheses as the foundation for a model of “Idealized Nodules”, which was validated by analysing nodule samples collected from the seabed within the Tonga Offshore Mining Limited (TOML) exploration contract. Once validated, the “Idealized Nodule” model was used to deduce a set of empirical formulae for predicting the nodule resources, in terms of Percentage Coverage and Abundance. The formulae were then applied to analysing a total of 188 sets of nodule samples collected across the TOML areas, comprising box-core samples and towed camera images collected by one of the authors and detailed in [4]. The analysis also relies upon detailed box-core sample measurements from other areas reported by [7]. Numerical results for resource prediction were compared with field measurements, and reasonable agreement has been achieved. The new method has the potential to achieve more accurate mineral resource estimation with reduced sample numbers and sizes. They may also have application in improving the efficiency of design and configuration of mining equipment.

In order to better realize rural revitalization, this paper analyzes the spatial and temporal char-acteristics and influencing factors of agricultural surface source pollution in the Yangtze River Economic Belt from the three perspectives of government, enterprise and agriculture by using the spatial Durbin model and the dynamic GMM method in the period of 2006-2021, and further re-searches the threshold characteristics of the distortion of the factor market on the agricultural surface source pollution under the different strengths of environmental regulation. The results show that there is a positive spatial correlation between agricultural surface pollution in the Yangtze River Economic Belt, and government environmental regulation, input factor market distortion and labor force transfer all have a significant impact on agricultural surface pollution. Among them, factor market distortion has a significant spatial spillover effect on agricultural surface pollution in the Yangtze River Economic Zone, and has a significant single-threshold ef-fect on environmental regulation. Accordingly, the government should strengthen environmental regulation, continuously improve the agricultural factor market mechanism, and pay attention to the construction of talents to provide support for rural revitalization.

Quite a number of new metered parking systems have been introduced in recent years by the local authorities of various spa towns in Poland in connection with home zone conversion projects. The traffic signs posted in these locations were limited to the beginning and end of the demarcated parking area. Traffic circle (TC) is an example of traffic calming measures (TCM) used in home zones to slow down the traffic (case study – home zone in a small spa village). This article presents the results of a study investigating the speed reductions obtained with a home zone and traffic circle used as traffic calming measures. The indispensable speed surveys were carried out in relation to this study in two periods: in summer when the streets are crowded with tourists and in September with little pedestrian traffic. Two research hypotheses were formulated as part of the speed data analysis to verify the slowing effect of traffic circle and the relevance of traffic circles design parameters and location, road function and the surrounding streetscape. For each hypothesis statistical analyses were carried out using two nonparametric tests: two-sample Kolmogorov–Smirnov test and median test. The third research hypothesis formulated in this study was related to sustainable development factors related to fuel consumption and traffic-related air pollution including carbon dioxide, carbon monoxide, nitrogen oxide and hydrocarbons. This hypothesis was verified by estimating the amount of air pollution in the home zone under analysis in three different situations (scenarios): in summer with the travel speed reduced by pedestrian traffic to ca. 8–10 km/h and in September with a small number of pedestrians and 20–25 km/h resulting speed between traffic circles, reduced at traffic circle, and in a theoretical 30 km/h zone with 25–30 km/h assumed speed between traffic circles, dropping at traffic circle. These analyses confirmed the appropriateness of traffic circle as a home zone traffic calming measure, as long as its design is based on a detailed analysis of the relevant factors, including location, road function and the surrounding streetscape.

Thermoplastic composites are continuously replacing thermosetting composites in lightweight structures. However, the accomplished work on the fatigue behavior of thermoplastics is quite limited. In the present work, we propose a numerical modeling approach for simulating fatigue delamination growth and predicting the residual tensile strength of quasi-isotropic TC 1225 LM PAEK thermoplastic coupons. The approach is supported and validated by tension and fatigue (non-interrupted and interrupted) tests. Fatigue delamination growth is simulated using a mixed-mode fatigue crack growth model, which is based on the cohesive zone modeling method. All interfaces between the thermoplastic plies were modelled using cohesive elements. Quasi-static tension analyses on pristine and fatigued coupons were performed using a progressive damage model implementing a set of Hashin-type strain-based failure criteria and a damage mechanics-based material property degradation module. Using the fatigue model, delamination growth was predicted as a function of number of cycles at all interfaces. The results agree well with C-scan images taken on fatigued coupons during interruptions of fatigue tests. An unequal and unsymmetric delamination growth was predicted due to the quasi-isotropic lay-up. Moreover, the combined models capture the decrease in the residual tensile strength of the coupons. In the quasi-static tension analysis of the fatigued coupons, the driving failure mechanisms are the fast propagation of the pre-existing delamination and the severe matrix cracking.

The surrounding rock during the coal mine excavation is prone to significant engineering disasters such as considerable deformation and rockbursts. Pressure release can improve the stress field of a deep rock mass and prevent the occurrence of dangers such as roadway collapse and coal and gas outbursts. This paper uses the ANSYS/LS-DYNA finite element software to simulate the crush area and fracture zone of a detonation charge with different diameters under in-situ stress. The stability of the surrounding rock was analyzed based on the impact stress and velocity, and was verified by field tests. The research results show that the blasting load primarily affects the damaged area near the borehole, while the in-situ stress affects the far-field crack propagation. The crack propagates in the direction of high surrounding rock pressure. When the uncoupling index is 1.5, the impact pressure of the 60 mm diameter cartridge is 8 times that of the 20 mm diameter cartridge. The impact speed can reach 2 times that of the 20 mm diameter cartridge. The high-energy event of the roof is transferred to the front of the working face, the distribution is no longer concentrated, and a better blasting pressure relief effect is achieved. The research results can help guide the prevention and control measures of rock bursts and other mining disasters.

Ferrite body is the origin of crack and corrosion initiation of steels. Distribution and density of ferrite in seven steel ingots were examined by light optical microscopy and computational modeling in the study to explore the correlation of ferrite formation to chemical composition and mushy zone temperature in ingot forming. The central segregation phenomenon in ferrite distribution was observed in all the examined steel specimens except 0Cr17Ni4Cu4Nb stainless steel. No significant difference was found in distribution and density of ferrite amongst zones of the surface, ½ radius and core in neither risers nor tails of 0Cr17Ni4Cu4Nb ingots. Additionally, fewer ferrite was found in 0Cr17Ni4Cu4Nb compared to other examined steels. The difference of ferrite formation in 0Cr17Ni4Cu4Nb elicited a debate on the traditional models explicating ferrite formation. Considering the compelling advantages in mechanical strength, plasticity and corrosion resistance, further investigation on the unusual ferrite formation in 0Cr17Ni4Cu4Nb would help understand the mechanism to improve steel quality. In summary, we observed that ferrite formation in steel was correlated with mushy zone temperature. The advantages of 0Crl7Ni4Cu4Nb in corrosion resistance and mechanical stability could be resulted from that fewer ferrites formed and distributed in a scattered manner in microstructure of the steel.

Soil, geochemical, microbiological and archaeological studies were conducted at eight settlements dating from the Paleolithic to Late Medieval and New Times near the Southern Trans-Urals mountains, Russia. The forest-steppe landscapes, rivers and abundance of mineral resources have attracted people to region since ancient times. Properties of cultural layer (CLs): close to neutral pH, well structured, absence of salinity, enrichment with exchangeable calcium and anthropogenic phosphorus (0.2–0.4%). The majority of CLs start from 3–25 cm and last up to 40–60 cm and contain 6–10% organic carbon (Corg), in a layer of 0–20 cm because modern processes are developing here, at Ishkulovo site (around 14th century) Corg decreases to 1.3%, because CL is below 80 cm and in the absence of fresh organic material it is mineralized. The content of microbial biomass of the 0–10 cm layer is 520–680 μg С/g of soil, microbes cause the emission of 0.2–1.0 μg C–CO2/g soil per h. The proximity of the studied sites to deposits of copper, chromium, zinc, manganese and Magnitogorsk Metallurgical and Uchaly processing plants creates geochemical anomalies of soils. Pollutants are also released into the CLs from bronze products, ore, ceramic fragments and raw materials from their manufacture. It leads to the concentration of pollutants of the 1st (arsenic, lead, zinc) and 2nd (cobalt, copper, nickel, chromium) hazard classes in the studied CLs, often in quantities higher than the clarke and less often – more than the allowable content for human health.

Low Emission Zone (LEZ) is an important mechanism to limit the negative environmental impact of traffic pollution in an urban area. Car traffic in the zone is strictly regulated to meet certain technical and environmental criteria. Such solutions of urban environment protection are gaining popularity, especially in European conurbations. Nowadays there are above 300 zones in Europe, mostly established in Italy and Germany. So far there are no LEZs in Eastern and Central European countries. However, the Warsaw authorities are just discussing launching of a LEZ in the city in 2024. According to the ongoing project, the zone is to be launched gradually, in five phases between 2024 and 2032, with the traffic criteria being tightened accordingly. The progressive emission reductions of the predominant pollutants in LEZ in consecutive phases were estimated on the basis of the Real Driving Emissions (RDE) test, carried out in 2020 by the ICCT. The gradually reduced emissions of NOx and PM were subsequently utilized as the input dataset for the regional CALPUFF model predictions, to calculate concentrations of these main traffic-induced pollutants within the LEZ area. The direct effect of the zone activation is reduction of air pollution in the urban center, which is mostly exposed to the pollution risk due to heavy traffic. Computer simulations reveal that implementation of the zone in the case of Warsaw will result in a quite significant reduction of NOx concentrations within the LEZ, such that its mean concentration in the zone becomes comparable to the rest of the conurbation. However, it will bring only a slight reduction of PM2.5 concentrations. This situation is due to the long-standing dominance of coal combustion in the Polish economy, which also applies to the urban municipal sector. As a consequence, particulate matter emissions of this sector are clearly predominant over the road traffic contribution. Balance can be achieved once the ongoing de-carbonization of the national economy has been completed.

Northeastern margin is a natural experimental field for studying crustal extrusion and expansion mechanism. Accurate crustal deformation pattern is a key point in the analysis of regional deformation mechanism and seismic hazard research and judgment. In this paper, the present-day GPS velocity field on the northeastern margin of the Tibetan Plateau was obtained from encrypted GPS observations around the Haiyuan-Liupanshan fault zone, combined with GPS observations on the northeastern margin of the Tibetan Plateau from 2010 to 2020. Firstly, we divided the study area into three relatively independent blocks: ORDOS block, Alxa block and Lanzhou block; secondly, the accurate fault distribution of the Haiyuan-Liupanshan fault zone was taken into account to obtain the optimal inversion model; finally, using the block and fault back-slip dislocation model, the inversion got the slip rate distribution, locking depth and slip deficit rate of each fault. The results indicate that the Laohushan Fault and Haiyuan Fault are dominated by left-lateral strike-slip, while the Liupanshan Fault is dominated by thrust dip-slip, and the Guguan-Baoji Fault has both left-lateral strike-slip and thrust dip-slip components. The maximum locking depths of the Laohushan Fault, Haiyuan Fault, Liupanshan Fault and Guguan-Baoji Fault are 5 km, 13 km, 15 km and 10 km respectively, and the locking of Haiyuan Fault is strong in the middle section and weak in the eastern and western section. The Haiyuan Fault is still in the post-earthquake stress adjustment stage. The slip deficit rate decays from 3.6 mm/yr to 1.8 mm/yr from west to east along the fault zone. Combined with geological and historical seismic data, the results suggest that the mid-long term seismic risk in the Liupanshan Fault is high.

Long-term dewatering of groundwater is a necessary operation for mining safety in open-pit coal mines, while extensive dewatering might cause ecological problems due to dramatical changes of moisture movement in the soil, especially in ecological-fragile areas. This paper presents a quantitative methodology to evaluate the impact of the coal mining operation on moisture movement in the vadose zone by taking the Baorixile open-pit coal mine as an example. A long-term in-situ experiments（from 2004 to 2018), laboratory analysis and numerical modelling were conducted to analyse the mechanisms and relationship among the dropping groundwater level, the vadose-zone moistures, and the ecological responses in the grassland area. The experiment data and modelling results suggest that groundwater level dropping during open-pit mining operation has limited influence on the vadose zone, exhibiting a variation of capillary water zone within a depth of 3 m while the vadose zone and soil water zone were at least 16 m deep. The critical evaporation depth of ground water is 8 m. The long-term influence radius of groundwater dewatering is about 2.72 km during the Baorixile mining operation, and the groundwater level change mainly influences the lower part of the intermediate vadose zone and the capillary water zone below 16 m, with little influence on the moisture contents in the soil water zone where the roots of shallow vegetation grow. The results from this study provide useful insight for sustainable development of coal mining in ecological-fragile areas.

Climate change impacts threaten sustainable development efforts. The magnitude of the impacts, however, varies with socio-ecological characteristics of locations. This is the reason there is con-sensus on the necessity for climate change adaptive capacity building that is country driven, based on and responsive to local needs. However, information on context specific capacity building needs in developing countries is not readily available. The objective of this study was to establish location specific awareness, training, educational, research and technology capacity building needs for climate change adaptation among small-holder farmers in Uganda. Structured interviews were undertaken with 465 households from five agro-ecological zones selected based on the level of vulnerability of agricultural systems to the main climate variation and change hazards. Results reveal substantial capacity building needs in all the zones. Majority of the farmers needed capacity building for interventions on soil water conservation practices for adapting to drought and un-predictable rainfall. For all zones, education, research, and technology were perceived as key needs. However, the needs varied among zones. These results demonstrate the importance of context specificity in adaptation efforts. The study provides agro-ecological and social system specific in-formation for climate change adaptation planning and policy interventions for effective capacity building

Due to its economic benefits and the ability to reduce carbon emissions on a large scale, the CCUS-EOR project has been widely promoted and implemented globally. By using carbon dioxide flooding, oil water transition zone reservoirs that were once considered worthless may have new potential for development because of its rich geological reserves and high quality carbon sequestration conditions. Unlike water flooded layer, the oil in the TZ is unsaturated rather than residual oil after water flooding, which would lead to special oil-water seepage law of initial oil saturation. It is necessary to clarify special oil-water seepage law of oil-water transition zone to evaluate its production & storage potential. In this paper, we present a series of experiments to characterize the relationship between residual oil saturation and initial oil saturation. Cores in four different permeability and oil in four different viscosity are used to simulate different reservoir conditions, and that CO2 immiscible flooding experiments for each cores permeability and oil viscosity are performed with four different initial oil saturation. A total of 36 sets of CO2 flooding experiment data are used to draw the initial oil saturation & residual oil saturation chart. The results show that the residual oil saturation depends on the initial oil saturation rather than constant under certain conditions of core and oil. Under the condition of low permeability and high oil viscosity, the influence of initial oil saturation on residual oil saturation is relatively strong. The initial oil saturation & residual oil saturation chart can accurately calculate the residual oil saturation, initial water cut and final recovery based on the core permeability, oil viscosity and the initial oil saturation which is the first time to put forward this kind of chart and of the great significance to evaluate the recovery potential of the TZ.

The scarcity of surface water resources in the dry season in the Kilinochchi district increases the demand for freshwater. Therefore, the existing groundwater resources should be managed to overcome the situation. Several authors worldwide have published studies on the delineation of potential groundwater zone. However, only a few studies addressed the delineation of potential groundwater zones in the Kilinochchi district. This study aims to delineate potential groundwater zones in Kilinochchi, Sri Lanka using integrated Remote Sensing, Geographic Information Systems, and Analytic Hierarchy Process techniques. Groundwater potential zones are demarcated for the Kilinochchi district by overlaying thematic layers: geology, geomorphology, land use/land cover, soil types, drainage density, slope, lineament, and rainfall. Saaty's scale was applied to the assigned weights of the chosen thematic layers and their features. The thematic layers were integrated into a Geographic Information System, and a weighted overlay analysis is carried out to delineate groundwater zones. Thus the resultant map is categorized into five different potential zones: very low, low, moderate, high, and very high. It was found that the very high groundwater potential zone is mainly found in the north-eastern part of the study area covering 111.26 km2. The upper north-western, middle, and eastern parts of the study area fall within the high groundwater potential zone covering about 507.74 km2. The moderate groundwater potential zones (309.89 km2) mainly occurred in the western part, and the extreme west part of the study area falls under low (207.78 km2) and very low (59.12 km2) zones. The groundwater potential map was validated with the existing seventy-nine wells, which indicated a good prediction accuracy of 81.8%. This research will help policymakers better manage the Kilinochchi district's groundwater resources and gives scope for further research into groundwater exploration in the area.

In Cameroon, alcoholic beverages remain the main consumed drink. In the Northern regions, indigenous sorghum beers are popular and widely consumed in an actively fermenting state by the people. In this study, some physicochemical parameters of the alcoholic sorghum beverages and correlations between them were evaluated during fermentation for 10 days. The indigenous white and red beers were produced at the laboratory scale assisted by experimented producers and some parameters (pH, total acidity, alcohol, sugars, density, total solids, temperature, and conductivity) were measured on the wort and fermented beverages. The pH decreases from 3.2 to 2.4 and 3.11 to 2.41; total acidity increases from 1.07 to 5.1 g/l and 0.5 to 4.6 g/l; alcohol enhances from 0 to 9.5% and 0 to 6.8% (v/v); total solids drop from 13.6 to 5°P and 12.2 to 3.3°P were observed respectively in the white and red sorghum beers. The multivariate analysis showed a good correlation between consumption of sugar, the decrease of total solids and density with the decrease in pH. It was also shown that, a perfect link exist between the production of alcohol and organic acids. The hierarchical analysis showed that indigenous red beer samples fermented for 1 and 2 days and those fermented for 4 to 10 days are related and could be separate in two distinct groups, whereas white turbid beer samples are separated in three different groups, those fermented for 1 to 4 days, those 5 to 6 days and those 7 to 10 days. The results obtained could serve as a guide to better understand the fermentation process of the indigenous alcoholic sorghum-based beverages.

Increasing CO2 concentration ([CO2]) in atmosphere decreases mineral nutrients concentration in crops whereas increasing water use efficiency (WUE) especially in drought conditions. Partial root-zone irrigation (PRI) could stimulate soil nutrient mineralization and improve crop nutrient status. Yet the effect of PRI combined with elevated CO2 concentration (e[CO2]) on the element stoichiometry of tomato leaves remains unknown. This study was to investigate the responses of leaf mineral nutrients status and element stoichiometric ratio in tomato grown at PRI exposed to e[CO2]. Tomato plants (cv. Ailsa Craig) were grown in pots in climate-controlled growth chambers with ambient [CO2] (a[CO2], 400ppm) and elevated [CO2] (e[CO2] 800ppm), respectively. Three irrigation regimes (IR) i.e. full irrigation (FI), deficit irrigation (DI) and partial root-zone irrigation (PRI) were applied to tomato plants at flowering stage. The result showed that plants exposed to both reduced irrigations had a similar biomass, an enhanced root growth including greater root to shoot ratio (R/S), root length (RL), surface area (RS), volume (RV) and specific length (RSL), and an improved WUE under e[CO2]. Compared to a[CO2], e[CO2] growth environment resulted in a similar leaf [C], [K] and [Mg], leaf C/K and C/Mg, increased leaf [Ca], [S] and leaf C/N, C/P and N/P, but decreased leaf [N], [P], leaf C/Ca, C/S and N/K at PRI. Additionally, under e[CO2], PRI showed an increase in leaf [C], [N] and [S], no decrease in leaf [K], Ca], [Mg], [S] and [15N], but a decrease in leaf C/N and C/S as compared with FI. Conclusively, PRI had the ability to alleviate the negative effects on mineral nutrient concentrations and maintain or improve most leaf element stoichiometric ratios under e[CO2]. Therefore PRI would be a practicable irrigation for optimizing WUE and nutrient status in tomato leaves in a future freshwater-limited and higher CO2 environment.

Riparian zones represent ecotones between terrestrial and aquatic ecosystems and are of utmost importance to biodiversity and ecosystem functions. Modelling/mapping of these valuable and fragile areas is needed for an improved ecosystem management, based on an accounting of changes and on monitoring of their functioning in time. In Europe, the main legislative driver behind this goal is the European Commission’s Biodiversity Strategy to 2020, on one hand aiming at reducing biodiversity loss, on the other hand enhancing ecosystem services by 2020, and restoring them as far as feasible. A model, based on Earth Observation data, including Digital Elevation Models, hydrological, soil, land cover/land use data, and vegetation indices is employed in a multi-modular and stratified approach, based on fuzzy logic and object based image analysis, to delineate potential, observed and actual riparian zones. The approach is designed in an open modular way, allowing future modifications and repeatability. The results represent a first step of a future monitoring and assessment campaign for European riparian zones and their implications on biodiversity and on ecosystem functions and services. Considering the complexity and the enormous extent of the area, covering 39 European countries, including Turkey, the level of detail is unprecedented. Depending on the accounting modus, 0.95%–1.19% of the study area can be attributed as actual riparian area (considering Strahler’s stream orders 3-8, based on the Copernicus EU-Hydro dataset), corresponding to 55,558–69.128 km². Similarly depending on the accounting approach, the potential riparian zones are accounted for about 3-5 times larger. Land cover/land use in detected riparian areas was mainly of semi-natural characteristics, while the potential riparian areas are predominately covered by agriculture, followed by semi-natural and urban areas.

This study examined the spatial-temporal distribution of sulfur and iron compounds (dissolved sulfide, iron sulfide, and ionized iron) in sediments from April 2015 to March 2016 at four stations in Mikawa Bay, Japan. Seasonal changes were observed in dissolved sulfide, iron sulfide, and ionized iron in the upper part of the sediment (0–4 cm depth) at all stations. The maximum concentration in the upper part of the central bay was 2.8 mmol L-1. The maximum values of dissolved sulfide (ranging from 1.4 to 8.1 mmol L-1) at stations located in a water way varied among stations. The iron sulfide concentration in the upper part of the sediment at a station where dissolved sulfide concentration in the waterway was relatively low exceeded that at other stations in the waterway during spring to summer. Ionized iron concentration was highest at the station where the dissolved sulfide concentration was low. The study results suggest that iron plays an important role in determining the magnitude of dissolved sulfide accumulation in sediments by binding with dissolved sulfide. The results imply the possibility of mitigating the accumulation of free sulfides, which causes extreme hypoxia, by artificially adding sufficient iron to the seabed.

The study aims to examine the effects of artificial intelligence (AI) on the consistency and analysis of financial statements in hotels in ASEZA, Jordan. This research is an exploratory, empirical study, which uses the methodology of data collection and interpretation to draw conclusions. The researchers used the arithmetic mean, standard deviation, T-test and ANOVA test to calculate the degree of significance of the study questions. The findings of a basic linear regression study of the impact of AI implemented in Jordanian hotels on the integration of accounting information systems and the association between AI and the integration of accounting information systems (R = 59.6%) also indicate that the fixed limit value amounted to (2.060) and the value of (Beta) for T-test

Based on the geochemical analysis of the volcanic material from the sediment core AMK-340, central zone of the Reykjanes Ridge, we could detect two ash-bearing sediment units accumulated during the Termination I. They correlate to the Ash Zone I in the North Atlantic Late Quaternary sediments having an age of 12170-12840, within the Younger Dryas cold chronozone, and 13600-14540 years, within and Bølling-Allerød warm chronozone. The ash of the Younger Dryas unit is presented mostly by the mafic and persilicic material originated from the Icelandic volcanoes; Vedde Ash is presented in one sediment sample from this unit. The ash of the Bølling-Allerød unit is presented mostly by the mafic shards which are related to the basalts of the rift zone on the Reykjanes Ridge, having presumably the local origin. A detection of Vedde Ash helped to specify the timing of the previously reconstructed paleoceanographic changes for the Termination I in the point of study: a significant warming in the area could occur as early as 300 years prior to the end of the conventional Younger Dryas cold chronozone.

Abstract: The objective of these studies was to determine the dependence of the distribution of the microwave field into a grain layer and the efficiency of energy transfer from the magnetron into the grain layer, via a waveguide, on the moisture content. The subject of the research was a semicircular waveguide with slot radiators that supply a microwave field to the grain surrounding the waveguide. The change in the directional diagram of the microwave field in the longitudinal direction of the waveguide was studied using CST Microwave Studio 2019 software. It was found that the change in the moisture content of the processed grain leads to a significant change in both the radiation and total efficiency values of the waveguide. For instance, the radiation efficiency of the waveguide decreases by 15.1% (from 68.729 dB to 58.294 dB) when the moisture content of the processed grain increases from 14% to 26%. The total radiation efficiency also decreases (from 11.27 dB to 21.7 dB). In this case, not only the value of the radiation efficiency but also the shape of its dependence on the magnetron radiation frequency change. Data were obtained on the change in the Q-factor for resonators in which grain layers are processed, depending on the variation in grain moisture content.

Flow and transport processes in soil and rock play a critical role in agricultural non-point source pollution (ANSP) loads. In this study, we investigated the ANPS load discharged into rivers from an irrigation district in the Tibetan Plateau, and simulated ANPS load using a distributed model involving detailed descriptions of flow and ANPS transport and transformation processes in the soil and rock. Experiments were conducted for two years to measure soil water content and nitrogen concentrations and the quality and quantity of lateral flow in the rock and at the drainage canal outlet during the highland barley growing period. A distributed model, in which the subsurface lateral flow was described using a step-wise method, was developed to simulate flow and ammonium nitrogen and nitrate nitrogen transport. Sobol’s method was used to evaluate the sensitivity of simulated flow and transport processes to model inputs. The results showed that, with a 21.2% increase of rainfall and irrigation in the highland barley growing period, the average NH4+-N and NO3--N concentrations in the soil layer decreased by 10.8% and 14.3%, respectively, due to increased deep seepage. Deep seepage of rainfall water accounted for 0–52.4% of total rainfall, whereas deep seepage of irrigation water accounted for 36.6–45.3% of total irrigation. NH4+-N and NO3--N discharged into the drainage channel represented 19.9–30.4% and 19.4–26.7% of the deep seepage, respectively. The mean Nash-Sutcliffe coefficients, root mean square errors, and cumulative deviations between the measured and simulated flow rates and NH4+-N and NO3--N concentrations at the surface drainage canal outlet were 0.694, 0.081, and 0.242, respectively, indicating that the proposed method can effectively describe the hydrological and ANPS pollution migration in the plateau irrigation zone. The Sobol’ sensitivity analysis results demonstrated that subsurface lateral flow had the most important first order and total effect on the simulated flow and NH4+-N and NO3--N concentrations at the surface drainage outlet.

Acid in-situ leaching (ISL) is a common approach to the recovery of uranium in the subsurface. As some toxic and harmful substances might be produced by the chemical reactions among the injected sulphuric acid, the groundwater, and the porous media during leaching processes, the pollution control of the mining plan for ISL is important. In this study, a three-dimensional reactive transport modeling (3DRTM) was applied to decide the pollution control mining plan, considering the partial penetration through wellbore in confined aquifer and complex chemical reactions between main minerals. Based on the 3DRTM, different pumping ratio and non-uniform injection schemes were compared. The results show that the preferential pollution control mining plan is non-uniform injection ratio equal 0.1. By analyzing the characteristics of water table and streamline, it is concluded that the scheme has a strong hydraulic capture effect. In this scheme, the concentration of UO22+, H+, SO42- obtained by 3DRTM is lower. The inner well injection rate is 194.09 m3/d, the outer well injection rate is 158.89 m3/d, and the pumping rate is 264.00 m3/d. A reasonable suggestion is to adopt non-uniform injection mining mode in ISL.

Linear elastic fracture modeling coupled with empirical material tension data result in good quantitative agreement with experimental measurements of fracture failure for both brittle and tough epoxy nanocomposites. The nanocomposites comprise diglycidyl ethers of bisphenol A cured with O,O’ bis (2-aminopropylpropylene glycol) (Jeffamine D230) and doped with rubber nanoparticles of varying concentrations. Toughness, critical load, and critical displacement in quasi-static single edge-notched three-point bending are predicted accurately using both surface-based cohesive zone (CZS) and extended finite element (XFEM) methods implemented in Abaqus software. Fracture initiation within a crack is taken at the yield stress from uniaxial tension data. Prediction of fracture processes using a generalized truncated linear traction-separation law was significantly improved by considering the case of a linear softening function. There are no adjustable parameters in the XFEM model. The CZS model requires only optimization of the element displacement at fracture parameter. Thus, these continuum methods describe these materials in mode I fracture with a minimum number of independent parameters.

Surface urban heat island (SUHI) depicts the deteriorating thermal environment in high-density cities and local climate zone (LCZ) classification provides a universal protocol for SUHI identification. In this study, taking the central urbanized area of Guangzhou in the humid subtropical region of China as the study area, the maps or images of LCZ, land surface temperature (LST), SUHI and urban design factors were achieved by using Landsat satellite data, GIS database and a series of retrieval and classification algorithms, and the urban design factors influencing SUHI were investigated based on 625 samples of LCZs. The results show that in the summer daytime under the clear sky condition, the LST varied greatly from 26 °C to 40 °C and the SUHI changed in a wide range of -6 °C to 8 °C in the LCZs of the study area. Seven and five urban design factors influencing the summer daytime SUHI were identified for the two dominant LCZ of LCZs 1-5 (LCZ 1 to LCZ 5) and the mixed LCZ (containing at least three types of LCZs), respectively. The summer daytime SUHI prediction models were obtained by using the step-wise multiple linear regression, with the performance of R2 of 0.697, RMSE of 1.21 °C, and the d value of 0.81 for the model of LCZs 1-5, and the values of 0.666, 1.66 °C, and 0.76 for the model of the mixed LCZ, indicating that the models can predict the changes of SUHI with LCZs to a large and satisfactory extent. This study presents a methodology to efficiently achieve a large sample of SUHI and urban design factors of LCZs in the largely urbanized cities, and provides information beneficial to the urban designs and regenerations in the humid subtropical region.

China is rich in coal resources under water bodies. However, for a long time, the safety prediction of high-intensity mining under water bodies is one of the problems encountered by the coal industry. It is of great significance to realize safe mining under water bodies, improve the recovery rate of coal resources and protect reservoir resources. Therefore, this article takes the No. 5 coal seam and No. 11 mining area of Wangwa Coal Mine as the research object, and integrates physical simulation, numerical simulation, theoretical analysis and other methods to study the development height of water-conducting fracture zones in fully mechanized top coal caving mining. Solid-liquid coupling physical simulation test reveals the failure characteristics of overlying strata in goaf and the seepage law of reservoir water under the influence of mining. By comparing the monitoring data of borehole leakage, the measured data obtained by borehole peeping with the height data of water-conducting fracture zone obtained by the traditional empirical formula of three-under standard, the error between the two is as high as -29.39 %. In this case, the variance correction coefficient is used to correct the empirical formula, and on this basis, in order to effectively protect the surface water dam and water body, the mining height of coal seam in the working face with limited height mining is inversely derived. The research results provide a basis for the safety prediction of high-intensity mining under the reservoir dam in the ecologically fragile areas of western China and provide a scientific guarantee for the formulation of safety measures under such conditions.

This paper combines a literature survey and data analysis. The literature on the Subtropical Front (STF) in the Southern Ocean is reviewed with a two-pronged emphasis on the double-front structure of the STF, hence the existence of a subtropical frontal zone (STFZ), and the circumpolar continuity of the STFZ. The data analysis is based on the World Ocean Circulation Experiment (WOCE) sections. The STFZ is detected along each section independently from other sections, while moving circum-polarly downstream (eastward). The literature survey and data analysis confirm the circumpolar continuity of the STFZ extending from the Brazil Current across the South Atlantic, South Indian, and South Pacific up to Chile, being bound by the North and South STF. The circumpolar continuity of the STFZ is partly interrupted by South Africa and Tasmania, where the North STF ceases, while the South STF continues eastward. The South Atlantic STFZ is the southern boundary of the well-defined Subtropical Mode Water (STMW) thermostad, which cools eastward from 15°C to 11°C between the Brazil Current and Greenwich Meridian. In the southeast Pacific, the STFZ is the southern boundary of the 17-to-19°C thermostad (South Pacific Eastern STMW). The STFZ’s vertical extent is at maximum in the South Atlantic (>1000 m), decreasing eastward to 300 m in the southeast Pacific off Chile. A special attention is given to the South Pacific and the STFZ’s role in the ecology of Chilean jack mackerel Trachurus murphyi that spawn at the STFZ and migrate along the STFZ from Chile up to New Zealand.

The development trends of the modern world of power electronics dictate the requirements for the use of AC voltage converters as soft starters for induction motors. A direct connection of the motors to the mains voltage negatively affects both the motor itself and the mains system as a whole due to high starting currents values, which entail, as a rule, more frequent accidents and shorter the drive system service life. The paper presents a study of the control system of a multi-zone AC voltage regulator. The use of capacitive voltage dividers will also compensate for the consumed reactive power. The article analyzes the features of modern soft starters, describes the circuit design, presents a mathematical calculation by the method of algebraization of differential equations, a performed simulation modeling in Matlab/Simulink, and also an assembled experimental stand for further research. Particular attention is paid to the definition of the multizonality concept of the proposed converter and the analysis of the control method. The developed algorithm of the double-loop automatic control system will minimize the influence of induction motors on the mains voltage, and thus improve electromagnetic compatibility.

This paper presents the design and experimental results of a long cavity length Nd: YAG laser with large stable zone for water jet guided laser (WJGL) applications. The design is based on the light transmission matrix and resonator stability conditions, aiming to achieve a large stable zone and a short cut-off thermal focal length (CTFL). A folded concave resonator is researched to enhance the cavity length, and the influence of the tun-able cavity arm length on the oscillating beam in the resonator and in the YAG crystal is theoretically studied. Moreover, the effects of the output mirror curvature and the cavity arm length on the range of the stable area and the cut-off thermal focal length are also investigated. Experimental results show that a stable green laser output is obtained after second harmonic generation (SHG), with a pulse width ranging from 43ns to 143ns within the laser operating frequency range of 5-20kHz. At an operation frequency of 10kHz, the output power is 21.33W, and the instability of the output power within 400 minutes is 0.88%. The laser source achieves a maximum power of 25.7W at 20kHz, and the maximum single pulse energy reaches 2.7mJ at 6kHz. Finally, this is used as the laser source to couple with a water jet with a diameter of 100 microns, achieving a lossless water conductivity transmission over 60mm length with a peak power density of 0.742GW/cm2. These results demonstrate the suitability of the designed laser source for WJGL technology research.

Different types of pockmarks, including single pockmarks, circular pockmarks, elongated pockmarks, chain-type pockmarks and compound pockmarks, were identified in coastal areas around Fujian, China. The sediments associated with pockmarks were mainly silty clay to clay, with a small quantity of silt with fine sand. The sulfate content in the pore water in the sedimentary layers associated with pockmarks decreased with depth from the surface, whereas the free methane content increased with depth. The interaction between sulfate and methane is well known, but differences in the sulfate-methane transitional zone (SMTZ) were observed in different areas with different hydrologic characteristics. The sedimentary SMTZ of the offshore Zhe-min mud wedge was shallow, at 50–70 cm below the seafloor. The sedimentary SMTZ was moderately deep (90–115 cm) in the central bay area and deep (180–200 cm) in the sandy area offshore. This variability in SMTZ depth reflects different amounts of free methane gas in the underlying formations, with a shallower SMTZ indicating a higher free methane content. The free methane had δ13C values of -26.47‰ to -8.20‰ and a biogenic-hybrid genetic type. The flux of sedimentary gas from the pockmark surfaces, calculated according to Fick’s formula, was 2.89 to 18.85 l/m2·a. The shape, size and scale of the pockmarks are directly related to the substrate type and the gas production of the underlying strata and thus vary with the sedimentary environment and development stage. Therefore, different types of pockmarks, in various phases of development, are associated with different sedimentary and dynamical conditions. A single circular pockmark forms by strong methane flux. As the intensity of methane flux weakens, the pockmark becomes elongated in the direction of the water flow because of long-term erosion induced by regular hydrodynamic forces. Finally, under weak intensity of methane flux and the influence of complex hydrodynamic conditions, pockmarks merge to form large-scale, compound pockmarks.

The paper provides information on significant contamination of real laboratory water with hydrophilic microimpurities. This fact suggests that researchers are practically dealing with microdispersed systems. However, this fact is usually neglected in the discussions of the causes of the anomalous properties of water. We will show that, when exposed to various factors of physical nature, water demonstrates reactions of the same type, namely, increased pH and electrical conductivity, reduced redox potential and viscosity, and enhanced bioavailability. Each exposure is accompanied by the destruction of aggregates of the dispersed phase and its transition to a fine-dispersed state. The relationship between this phenomenon and the change in the physicochemical properties of water is discussed.

In this study, the shape and size of a combustion cavity with a fracture zone in the gasified coal seam was determined with use control boreholes and a ground-penetrating radar (BGPR) test. The underground coal gasification (UCG) field-scale experiment was performed in Carboniferous strata in coal seam 501 at a depth of approx. 460 m in the Wieczorek hard-coal mine in the Upper Silesian Coal Basin, Poland. After the termination of the UCG reactor, five coring boreholes were drilled to identify the geometry of the resulting combustion cavity and the impact of the UCG process on the surrounding rock mass. Borehole ground-penetrating radar measurements were performed using a 100 MHz antenna in three boreholes with a length of about 40-50 m. This enabled the identification of the boundaries of the combustion cavity and the fracture zone in the coal seam. The fracture zones of rock layers and lithological borders near the control borehole were also depicted. As a result, the cavity was estimated to have a length of around 32 m, a width of around 7 m and a height of around 5 m. The analyses performed with the control boreholes and the BGPR provided sufficient information to determine the geometry of the combustion cavity and the fracture zone.

One of the possible mechanisms causing significant emissions of methane into the atmosphere within the Arctic shelf may be the decomposition of gas hydrates. Their accumulations within the Arctic shelf formed during Ice Age almost simultaneously with the formation of permafrost, which contributed to the emergence of a zone of stable existence of gas hydrates. The subsequent flooding of the Arctic shelf led to the degradation of the permafrost and the violation of the conditions for the existence of hydrates. To assess the state of the stability zone, methods of mathematical numerical modeling are used. Standard seismic methods are widely used to localize gas hydrates, but monitoring their physical state requires the development of fundamentally new approaches based on solving multiparameter inverse seismic problems. In particular, the degree of attenuation of seismic energy is one of the objective parameters for assessing the consolidation of gas hydrates: the closer they are to the beginning of decomposition, the higher the attenuation, and hence the lower the quality factor. Thus, the methods of seismic monitoring of the state of gas hydrates in order to predict the possibility of developing dangerous scenarios should be based on solving a multi-parameter inverse seismic problem. This publication is devoted to the presentation of this approach.

Based on the theory that certain geological fault zones surpass the influence of other abiotic and biotic site factors for mound-building red wood ants (Formica rufa group), an area northwest of Tuttlingen with extremely high ant density was systematically surveyed, taking into account official geological maps. Indicators of active fault zones were recorded. These were additionally examined in a model area using a high-resolution digital terrain model (DTM 1-meter). The study area is located in the Swabian Jura at the western edge of the Albstadt shear zone, where recent seismic activity is documented by frequent earthquakes. The earthquakes are considered to be the cause of gas permeability in the strike-slip faults, around which the clustered nesting sites were mapped. More than 2900 nests of the Formica rufa group were mapped and their site conditions analysed in different geomorphological positions. In addition to recording forestry site conditions, a geological classification was carried out, as well as an analysis of soil gases/mofettes in areas with the highest nest densities. The correlation between forestry data and nest sites did not reveal a consistent pattern. In contrast, the relationships with gas-permeable strike-slip faults, though predominantly covered with Quaternary sediments, could be identified through CO₂- and CH₄-rich gas emissions, mofettes, and doline features. The interpretations were complicated due to different mapping ages and signatures of the geological maps. Fortunately, this issue could be analysed and evaluated in a sub-area with mappings from 1936/71 and 1995 regarding presumed or confirmed fault trajectories. New insights were gained regarding the relationships between Formica nest sites, gas-permeable faults, and groundwater levels on narrow mountain ridges with steep relief. Here, the lateral emission of CO₂ depends on the groundwater level and does not occur vertically directly above the fault. C- and H-isotope data of CO₂ and CH₄ do not show a consistent source. While methane is mainly derived from biological production by Archaea in the upper crust and in swamp areas, CO₂ mostly originates from the mantle. The results of the investigations revealed that a multitude of geological and ecological factors must be considered for the interpretation of the occurrences of Formica sites northwest of Tuttlingen. These factors confer a distinct originality to this region, contributing not only to an enhanced understanding of site conditions but also furnishing information regarding environmentally relevant gas emissions.

The Greenland Ice Sheet is now the largest land ice contributor to global sea level rise, largely driven by increased surface meltwater runoff from the ablation zone, i.e. areas of the ice sheet where annual mass losses exceed gains. This small but critically important area of the ice sheet has expanded in size by ~50% since the early 1960s, and satellite remote sensing is a powerful tool for monitoring the physical processes that influence its surface mass balance. This review synthesizes key remote sensing methods and scientific findings from satellite remote sensing of the Greenland Ice Sheet ablation zone, covering progress in 1) radar altimetry, 2) laser (lidar) altimetry, 3) gravimetry, 4) multispectral optical imagery and, 5) microwave and thermal imagery. Physical characteristics and quantities examined include surface elevation change, gravimetric mass balance, reflectance, albedo, and mapping of surface melt extent and glaciological facies and zones. The review concludes that future progress will benefit most from methods that combine multi-sensor, multi-wavelength, and cross-platform datasets designed to discriminate the widely varying surface processes in the ablation zone. Specific examples include fusing laser altimetry, radar altimetry, and optical stereophotogrammetry to enhance spatial measurement density, cross-validate surface elevation change, and diagnose radar elevation bias; fusing optical imagery, radar imagery, and microwave scatterometry to discriminate between snow, liquid water, refrozen meltwater, and bare ice near the equilibrium line altitude; combining optical reflectance with laser altimetry to map supraglacial lake, stream, and crevasse bathymetry; and monitoring the inland migration of snowlines, surface melt extent, and supraglacial hydrologic features.