Eddy-driven jets are of importance in the ocean and atmosphere, and to a first approximation are governed by Rossby wave dynamics. This study addresses the time-dependent flux of fluid and potential vorticity between such a jet and an adjacent eddy, with specific regard to determining zonal and meridional wavenumber dependence. The flux amplitude in wavenumber space is obtained, which is easily computable for a given jet geometry, speed and latitude, and which provides instant information on the wavenumbers of the Rossby waves which maximize the flux. This new tool enables the quick determination of which modes are most influential in imparting fluid exchange, which in the long term will homogenize the potential vorticity between the eddy and the jet. The results are validated by computing backward- and forward-time finite-time Lyapunov exponent fields, and also stable and unstable manifolds; the intermingling of these entities defines the region of chaotic transport between the eddy and the jet. The relationship of all of these to the time-varying transport flux between the eddy and the jet is carefully elucidated. The flux quantification presented here works for general time-dependence, whether or not lobes (intersection regions between stable and unstable manifolds) are present in the mixing region, and is therefore also easily computable for wave packets consisting of infinitely many wavenumbers.

Emerging countries in Southeast Asia are facing considerable challenges in addressing rising motorisation and its negative impact on air quality, traffic, energy security, liveability, and greenhouse gas emissions. Indeed, even as initial policies to address these issues are being agreed and implemented, current trends are incompatible with sustainable development and long-term climate change targets. This paper presents a comparative analysis of the approach and status of sustainable, low-carbon transport policy in ASEAN countries and identifies differences and similarities, with the aim of helping assessment of feasibility of future policies and informing future studies on policy innovations and cross-country learning. The methodology is based on the taxonomy of policy components developed by Howlett and Cashore, and our data on comprehensive country studies for Indonesia, the Philippines, Thailand and Vietnam and interviews. We find that each country has a specific set of goals, objectives and targets that support sustainable transport, and, directly or indirectly, climate change mitigation. In terms of specific instruments and calibrations, which we analyse based on the Avoid-Shift-Improve approach, there are notable differences between the countries, for example in fuel economy policy.

Li₂TiO₃ nanopowders were synthesized by hydrothermal process using anatase TiO₂ and LiOH H₂O as raw materials. Li₂TiO₃ crystallizes in the layered monoclinic structure (space group C2/c) with average crystallite size of 34 nm. Morphology, elemental composition and local structure of products were carried out using HRTEM, FESEM, EDS, Raman and FTIR spectroscopy. Transport properties investigated by d.c. (4-probe measurements) and a.c. (complex impedance spectroscopy) show the activation energy of 0.71 and 0.65 eV, respectively. The ionic transport properties of Li⁺ ions in nanocrystalline Li₂TiO₃ characterized by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) validate the good electrochemical properties of this anode material for lithium-ion batteries.

TaABCC13 is member of wheat ABCC subclass of transporters. The RNAi mediated silencing of this transporter in wheat results in lowering of seed phytic acid level and other developmental defects. In addition to that, wheat ABCC13 was involved in cadmium detoxification as evident by the complementation assays in yeast. The appearance of early lateral roots in these transgenic seedlings speculated the possibility for studying the role of localized auxin-mediated effects. In the current study, firstly, the expression of auxin related genes was studied in the transgenic roots. Enhanced expression of genes pertaining to either auxin biosynthesis or its transport was observed in transgenic wheat seedling roots suggesting the direct effect of the hormone. Further, the early emergence of lateral roots in transgenic wheat seedlings was affected due to the presence of auxin-transport inhibitor suggesting the direct effect of hormones in root development. In conclusion, herein we provide the novel evidence for the auxin mediated regulation of lateral root emergence in TaABCC13:RNAi seedlings.

A facilitative transport system exists on the blood brain barrier (BBB) that has been tacitly assumed to be a path for glutamate entry to brain. But glutamate is a non-essential amino acid whose brain content is much greater than plasma, and studies in vivo show that glutamate does not enter brain in material quantities except in those small regions with fenestrated capillaries (circumventricular organs). The situation became understandable when luminal (blood facing) and abluminal (brain facing) membranes were isolated and studied separately. Facilitative transport of glutamate and glutamine exist only on the luminal membranes whereas Na+-dependent transport systems for glutamate, glutamine and some other amino acids are present only on the abluminal membrane. The Na+-dependent cotransporters of the abluminal membrane are in a position to actively transport amino acids from the extracellular fluid (ECF) into the endothelial cells of the BBB. These powerful secondary active transporters couple the energy of the Na+-gradient to move glutamate and glutamine into the ECF whereupon glutamate can exit to blood on the luminal facilitative glutamate transporter. Glutamine may also exit brain on a separate facilitative transport system that exists on the luminal membranes or glutamine can be hydrolyzed to glutamate within the BBB thereby releasing ammonia that is freely diffusible. The γ-glutamyl participate cycle participates indirectly by producing oxoproline (pyroglutamate) that stimulates almost all secondary active transporters yet discovered in the abluminal membranes of the BBB.

The critical hypoxia in COVID-19 patients during this pandemic, has taken away many lives all around the globe. The mechanism has been poorly understood and initially, word got around that it was a SARS (Severe Acute Respiratory Syndrome) pneumonia. The atypical images in lung computerized axial tomography (CAT) scans were alarming. This immediately alerted everyone including poor countries to purchase lacking sophisticated ventilator equipment. However, in some countries, even 88% of the patients on ventilators lost their lives. New observations and pathological findings are gradually clarifying the disease. What seems evident is that it is not only one disease but several, with different responses in different countries and different altitudes. The critical hypoxia and «gasping» present in some patients are not totally understood. It was mentioned that it could be like a High-Altitude Pulmonary Edema (HAPE). Hereby, as high-altitude medicine and hypoxia physiology specialists, we compare the pathophysiology with that of high-altitude exposure in order to understand the mechanisms involved. Some differences in lung radiological images along with transmission and viral attack mechanisms are discussed. The oxygen transport triad used at high-altitude can be applied on this pathology in order to propose even the use of erythropoietin (EPO) early in the treatment. The immune system is the most important long-term survival tool, so we suggest a short-term strategy: the use of special Earth open-circuit astronaut-resembling suits with effective outside air filtering re-breathing mechanisms in order to return to work and daily activities, without contamination risk. Thereby, the curve can be flattened without quarantine and the economy could recover.

Given the persistence of microplastics in the environment and their potential toxicity to ecosystems, understanding of likely microplastic accumulation ‘hotspots’ in rivers is urgently needed. To contribute to this challenge, this paper reports results of a microplastic survey from a heavily urbanised catchment, the River Tame, which flows through the city of Birmingham, UK. All sediment sampled was found to contain microplastics with an average abundance of 165 particles kg-1. While urban areas generally have a greater abundance of microplastics as compared with rural, there is no simple relationship between microplastic numbers and population density or proximity to wastewater treatment sites. The greatest change in microplastic abundance was due to the presence of a lake along the course of the River Tame i.e. on entering the lake flow velocities are reduced which promotes the deposition of fine sediment and potentially microplastics. This suggests that the greatest concentrations of microplastics will not be found in-channel but rather on the floodplain and other low velocity environments such as meander cutoffs. We also identified a new mechanism of microplastic fixation in freshwater environments through ecological engineers, specifically caddisfly that incorporated microplastics into their casing. These results highlight the need to explore further hydrodynamic and ecological impacts on microplastics fate and transport in rivers.

Analytical channel design tools have not advanced appreciably in the last decades, and continue to produce designs based upon a single representative discharge that may not lead to overall sediment continuity. It is beneficial for designers to know when a simplified design may be problematic and to efficiently produce alternative designs that approximate sediment balance over the entire flow regime. The Capacity/Supply Ratio (CSR) approach, an extension of the Copeland method of analytical channel design for sand channels, balances the sediment transport capacity of a design reach with the sediment supply of a stable upstream reach over the entire flow duration curve (FDC) rather than just a single discharge. Although CSR has a stronger physical basis than previous analytical channel design approaches, it has not been adopted in practice because it can be a cumbersome and time-consuming iterative analysis without the use of software. We investigate eighteen sand-bed rivers in a comparison of designs based on the CSR approach and five single-discharge metrics: the effective discharge (Qeff), the 1.5-year recurrence interval discharge (Q1.5), the bankfull discharge (Qbf), and the discharges associated with 50th (Qs50) and 75th (Qs75) percentiles of the cumulative sediment yield curve. To facilitate this analysis we developed a novel design tool using the Visual Basic for Applications (VBA) programming language in Excel® to produce stable channel slope-width combinations based on the CSR methodology for both sand- and gravel-bed streams. The CSR Stable Channel Design Tool’s (CSR Tool) code structure was based on Copeland’s method in SAM and HEC-RAS (Hydrologic Engineering Center’s River Analysis System) and was tested with a single discharge to verify outputs. The Qs50 and Qs75 single-discharge designs match the CSR output most closely, followed by the Qbf, Qeff, and Q1.5. The Qeff proved to be the most inconsistent design metric because it can be highly dependent on the binning procedure used in the effectiveness analysis. Furthermore, we found that the more rigorous physical basis of the CSR analysis is potentially most important in designing ‘labile’ channels with highly erodible substrate, high perennial flow ‘flashiness,’ low width-to-depth ratio, and high incoming sediment load. The CSR Tool provides a resource for river restoration practitioners to efficiently utilize in-depth design techniques that can promote sediment balance in dynamic fluvial systems.

This paper addresses a wildlife monitoring problem using a team of UAVs for efficient monitoring of wildlife. The state-of-the-art technology using UAVs has been an increasingly popular tool to monitor wildlife compared to the traditional methods such as satellite imagery-based sensing or GPS trackers. However, there still exist unsolved problems as to how the UAVs need to cover a spacious domain to detect animals as many as possible. In this paper, we propose the optimal transport-based wildlife monitoring strategy for a multi-UAV system, to prioritize monitoring areas while incorporating complementary information such as GPS trackers and satellite-based sensing. Through the proposed scheme, the UAVs can explore the large-size domain effectively and collaboratively with a given priority. The time-varying nature of wildlife due to their movements is modeled as a stochastic process, which is included in the proposed work to reflect the spatio-temporal evolution of their position estimation. In this way, the proposed monitoring plan can lead to efficient wildlife monitoring with a high detection rate. Various simulation results including statistical data are provided to validate the proposed work.

Electric mobility begins to enter East-African markets. This paper aims to investigate what policy level solutions and stakeholder constellations are established in the context of e-mobility in Dar es Salaam, Kigali, Kisumu and Nairobi and in which ways they attempt to tackle implementation of electric mobility solutions. The study employs two key methods including content analysis of policy and programmatic documents as well as interviews based on purposive sampling ap-proach with stakeholders involved in mobility transitions. The study findings point out that transport operators and their representative associations are less recognized as major players in the transition, far behind new e-mobility players (start-ups) and public authorities. The study further indicates that a set of financial and technical barriers persist such as high upfront invest-ment costs in vehicles and infrastructure, or anxieties regarding competitiveness with fossil fuel vehicles, that constrain the uptake of such private e-mobility initiatives. This study concludes by identifying current gaps that need to be tackled by policy makers and stakeholders in order to implement inclusive electric mobility in East-African cities, considering modalities that include transport providers and address their financial constraints.

We present an exact expression for the upscaled dynamic dispersion coefficient (D) for one-dimensional transport by Hagen-Poiseuille flow which is the basis for modeling transport in porous media idealized as capillary tubes. The theoretical model is validated by comparing the breakthrough curves (BTCs) from a 1D advection-dispersion model with dynamic D to that from direct numerical solutions utilizing a 2D advection-diffusion model. Both Taylor dispersion theory and our new theory are good predictors of D at lower Peclet Number (Pe) regime, but gradually fail to capture most parts of BTCs as Pe increases. However, our model generally predicts the mixing and spreading of solutes better than Taylor’s theory since it covers all transport regimes from molecular diffusion, through anomalous transport, and to Taylor dispersion. The model accurately predicts D based on the early part of BTCs even at relatively high Pe regime (~62) where the Taylor’s theory fails. Furthermore, the model allows for calculation of the time scale that separates Fickian from non-Fickian transport. Therefore, our model can readily be used to calculate dispersion through short tubes of arbitrary radii such as the pore throats in a pore network model.

Urban areas are centres of business and innovation. Freight transport is indispensable for the proper functioning of any modern urban society. Urban areas can’t function without an appropriate freight transport system, due to the need to replenish stocks of food and other goods in retail shops. The complexity of the decisions concerning implementation of measures to improve the movement of goods in the city requires tools designed to support this process. The purpose of this article is to introduce the possibility of applying the Analytic Hierarchy Process (AHP) as well as the Decision Making Trial and Evaluation Laboratory Method (DEMATEL) in choosing a set of measures and in analysing in the field of distribution logistics, which will help to solve the delivery problems and streamline the cargo flows in Szczecin, in the context of sustainable development.

There is a large potential for cost-effective solutions to reduce greenhouse gas emissions and to improve the sustainability of the transport sector that is yet unexploited, in particular in the urban context. Considering the cost-effectiveness and the potential for co-benefits, it is hard to understand why energy gains and mitigation action in the transport sector is still lagging behind the potential. Particularly interesting is the fact that there is substantial difference among countries with relatively similar economic performances, such as the OECD countries in the development of their transport CO2 emission over the past thirty years despite the fact that these countries had relatively similar access to efficient technologies and vehicles. This study aims to apply some well established political science theories on the particular example of climate change mitigation in the transport sector in order to identify some of the factors that could help explain the variations in success of policies and strategies in this sector. The analysis suggests that institutional arrangements that contribute to consensus building in the political process provide a high level of political and policy stability which is vital to long-term changes in energy end-use sectors that rely on long-term investments. However, there is no direct correlation between institutional structures, e.g. corporatism and success in reducing greenhouse gas emissions in the transport sector. Environmental objectives need to be built into the consensus-based policy structure before actual policy progress can be observed. This usually takes longer in consensus democracies than in politically more agile majoritarian policy environments, but the policy stability that builds on corporatist institutional structures is likely to experience changes over a longer-term, in this case to a shift towards low-carbon transport that endures.

Observation of the ambient aerosol surface area concentrations is important to understand the aerosol toxicity because an increased surface area may be able to act as an enhanced reaction interface for certain reactions between aerosol particles and biological cells, as well as an augmented carrier surface for co-pollutants. In this study, the concentration of aerosol surface area was measured from April 2015 to March 2016 in Fukuoka, Japan. We investigated the monthly and diurnal variations in the correlations between the aerosol surface area and black carbon (BC) and sulfate concentrations. Throughout the year, aerosol surface area concentration was strongly correlated with the concentrations of BC, which has relatively large surface area since BC particles are usually submicron agglomerates consisting of much smaller (tens of nanometers) sized primary soot particles. The slopes of the regression between the aerosol surface area and BC concentrations was highest in August and September 2015. This appears to have been the results of an increase in the proportion of the airmass that originated on the main islands of Japan. This may enhance the introduction of the BC from the main islands of Japan that is relatively fresh (or “uncoated”), thereby maintaining its larger surface area.

A membrane can be represented by an energy landscape that solutes or colloids must cross. A model accounting for the momentum and the mass balances on the membrane energy landscape establishes a new way of writing for the Darcy law. The counter pressure in the Darcy law is no longer written as the result of an osmotic pressure difference but rather as a function of colloid-membrane interactions. The ability of the model to describe the physics of the filtration is discussed in detail. This model is solved on a simplified energy landscape to derive analytical relationships that describe the selectivity and the counter pressure from ab-initio operating conditions. The model shows that the stiffness of the energy landscape has an impact on the process efficiency: a gradual increase in interactions (like with hourglass pore shape) can reduce the separation energetic cost. It allows the introduction of a new paradigm to increase membrane efficiency: the accumulation that is inherent to the separation must be distributed across the membrane. Asymmetric interactions thus lead to direction-dependent transfer properties and the membrane exhibits diode behavior. These new transfer opportunities are discussed.

The link between ICTs, freight transport, and CO₂ emissions has not received much explicit examination by researchers, despite freight transportation being an egregious contributor to environmental degradation. This paper investigates how ICTs can affect environmental quality when interacting with freight transport activities in 43 countries over the period 2002-2014, using carbon emissions as a proxy for environmental damages. ICTs are measured in terms of internet, telephone, and mobile phone technologies. Using GMM methodology, the results show that ICTs contribute to dampening environmental degradation when interacting with freight transport activities. Specifically, a 10% increase in the interaction between ICTs and freight transportation will decrease carbon emissions by between 1.27% and 3.02%. The results further suggest that fixed and smartphone technologies are the main contributors to reducing emissions when adopted in some specific transport sectors (i.e. road, rail, and inland), while the internet is the most efficient technology when interacting with air transport activity. In addition, the interaction between ICTs and multimodality accelerates environmental quality. The policy implications of these findings are discussed.

Nanostructured materials have already become an integral part of our daily life. In many applications ion mobility decisively affects the performance of, e.g., batteries and sensors. Nanocrystalline ceramics often exhibit enhanced transport properties due to their heterogeneous structure showing crystalline (defect-rich) grains and disordered interfacial regions. In particular, anion conductivity in nonstructural binary fluorides easily exceeds that of their coarse-grained counterparts. To further increase ion dynamics aliovalent substitution is a practical method to influence the number of (i) defect sites and (ii) the charge carrier density. Here, we used high energy-ball milling to incorporate Y³⁺ ions into the cubic structure of SrF₂. As compared to pure nanocrystalline SrF2 the ionic conductivity of Sr_1-xYxF_2+x with x = 0.3 increased by 4 orders of magnitude reaching 0.8 x 10 ^-5 S/cm^-1 at 450 K. We discuss the effect of YF₃ incorporation on conductivities isotherms determined by both activation energies and Arrhenius pre-factors. The enhancement seen is explained by size mismatch of the cations involved, which are forced to form a cubic crystal structure with extra F anions if x is kept smaller than 0.5

Experimental optimization of analytical methods based on solid-phase microextraction (SPME) is a complex and labor-intensive process associated with uncertainties. Using the theoretical basics of SPME and finite element analysis software for the optimization proved to be an efficient alternative. In this study, an improved finite element analysis-based model for SPME of volatile organic compounds (VOCs) by porous coatings was developed mainly focussing on the mass transport in coatings. Benzene and the Carboxen/polydimethylsiloxane (Car/PDMS) coating were used as the model VOC and a porous SPME coating, respectively. It has been established that in the coating, volumetric fractions of Carboxen, PDMS, and air are 33, 42 and 24%, respectively. Knudsen diffusion in micropores can slow down a mass transport of analytes in the coating. When PDMS was considered as the solid part of the coating, lower root-mean-square deviation of the modeling results from experimental data was observed. It has been shown that the developed model can be used to model the extraction of VOCs from air and water samples encountered in a typical SPME development method procedure. It was possible to determine system equilibration times and use them to optimize sample volume and Henry’s law constant. The developed model is relatively simple, fast, and can be recommended for optimization of extraction parameters for other analytes and SPME coatings. The diffusivity of analytes in a coating is an important property needed for improved characterization of existing and new SPME polymers and analytical method optimization.

In recent years, marine, freshwater and terrestrial pollution with microplastics has been discussed extensively, whereas atmospheric microplastic transport has been largely overlooked. Here, we present the first global simulation of atmospheric transport of microplastic particles produced by road traffic (TWPs – tire wear particles and BWPs – brake wear particles), a major source that can be quantified relatively well. We find a high transport efficiency of these particles to remote regions, such as the Arctic Ocean (14%). About 34% of the emitted coarse TWPs and 30% of the emitted coarse BWPs (100 kt yr^-1 and 40 kt yr^-1 respectively) were deposited in the World Ocean. These amounts are of similar magnitude as the total estimated terrestrial and riverine transport of TWPs and fibres to the ocean (64 kt yr^-1). Atmospheric transport of microplastics is thus an underestimated threat to global terrestrial and marine ecosystems and affects air quality on a global scale, especially considering that other large but highly uncertain emissions of microplastics to the atmosphere exist. High latitudes and the Arctic are highlighted as an important receptor of mid-latitude emissions of road microplastics, which may imply a future climatic risk, considering their affinity to absorb solar radiation and accelerate melting.

Below T_CO=157 K the quasi-one-dimensional charge-transfer salt (TMTTF)_2SbF_6 undergoes a pronounced phase transition to a charge-ordered ground state. We have explored the non-linear and photoconductive behavior as a function of applied voltage, laser pulse energy and temperature. Besides a decay of the photoconductive signal in a double exponential fashion in the millisecond range, we discover current oscillations in the kHz range induced by the application of short laser pulses. While the resonance frequencies do not depend on voltage or laser intensity and vary only slightly with temperature, the amplitude changes linearly with the laser intensity and voltage. The findings are discussed and compared to comparable phenomena in other low-dimensional electron systems.

Mineral dust is one of the most important aerosol in mass over the world, affecting health and dynamics. This aerosol is mainly emitted over arid areas but may be long-range transported, impacting the local budget of air quality in many cities. While models were extensively used to study a single specific event, or making a global analysis at coarse resolution, the goal of our study is to simultaneously focus on several areas - Europe, North America, Central Asia, East China and the Caribbean area - for a one month period, March 2014, avoiding any parameter fitting to better simulate a given dust outbreak. The simulation is performed for the first time with the hemispheric version of the CHIMERE model, with a horizontal resolution of 10km. In this study, an overview of several simultaneous dust outbreaks over the north hemisphere is proposed to assess the capability of such modelling tools to predict dust pollution events. A quantitative and qualitative evaluation of the most striking episodes is presented with comparisons to satellite data, ground based Particulate Matter and calcium measurements. Despite some overestimation of dust concentrations far from emission areas, the model is able to simulate the timing of the arrival of dust outbreaks on observational sites. For instance, several spectacular dust storms in the US and China are perfectly captured by the models. The high resolution allows to better describe and understand the orographic effects and the long-range transport of dust plumes.

In the case of vascular plants the process of water loss by leafs and water absorption by the root is well known. There is agreement on the passive nature of long-distance moisture movement in the dead cells of the xylem; however, controversy exists focusing on the long-distance water transport principle. Hales (1726) founded a view of bulk flow based on water suction after experiments with cut twigs. The previous doctrine of long-distance water transport within vessel elements and tracheid of the xylem of intact plants – the relevant cohesion theory in text books – was developed mainly by Boehm (1893), Renner (1911) and Dixon (1914) with plant artefacts. Water movement according to this theory is based on an assumed hydrodynamic bulk fluid flow in xylem in continuous water columns (free of water vapour space), under tension, according to the law of Poiseuille (see e.g. Dixon 1914). Physically hydrodynamics is part of fluid mechanics, as a result Poiseuille’s law is usually valid only for hydrodynamic bulk flow in ideal capillaries (Sutera & Skalak, 1993). Besides the basic requirement for transport, according to cohesion theory, the existence of ideal capillaries is not compatible with either: “Because vessel elements and tracheid do not stand as ideal capillaries. …” (Bresinsky et al. 2008, translated from German). Unlike ideal capillaries, the walls of vessel elements and tracheid interact with the transported water. These walls are able to function as a source or as a sink for the transported water because of interaction with the cell walls. With the interaction, vessel elements and tracheid, part of the xylem, can shrink and swell, unlike ideal capillaries. Because the xylem (in woody plants part of the wood) is inconsistent with the basic law of fluid flow, the equation of mass balance (Zimmermann et al. 2004) and cohesion theory are not strictly followed.Many plant physiologists view the cohesion theory as appropriate, however, this theory remains controver­sial, i.e. by Eisenhut (1988), Laschimke (1990) and Hahn (1993). Nultsch (1996) gives doubts referring to the present doctrine of plant water transport. Zimmermann et al. (2004) reject the cohesion theory and conclude: “... that the arguments of the proponents of the Cohesion Theory are completely misleading” (Zimmermann et al. 2004). Hence cohesion theory can be treated as inapplicable and the question arises: how does water transport in fact function? In the following, it is gone into in more detail. A sorption hypothesis of actual water transport, based on empirical fact, shall be addressed in this paper.

This paper describes the development of a two-dimensional water quality model that solves hydrodynamic equations tied to transport equations with reactions mechanisms inherent in the processes. This enable us to perform an accurate assessment of the pollution in a coastal ecosystem. The model was developed with data drawn from the ecosystem found in Mexico's southeast state of Tabasco. The coastal ecosystem consists of the interaction of El Yucateco lagoon with the Chicozapote and Tonalá rivers, that connect the lagoon with the Gulf of Mexico. We present the results of pollutants transport simulation in the coastal ecosystem, focusing on toxic parameters for two hydrodynamic scenarios: wet and dry seasons. As it of interest in the zone, we study the transport of four metals: Cadmium, Chromium, Nickel and Lead. In order to address our objectives we solved numerically a self-posed mathematical problem,which is based on the measured data. The performed simulations show to characterise metal transport within the acceptable range of accuracy and in accordance with the measured data. The performed simulations show to characterise metals transport with an acceptable accuracy, agreeing well with measured data in total concentrations in four control points along the water body. Although for the accurate implementation of the hydrodynamic-based water quality model herein presented, boundary (geometry, tides, wind, etc.) and initial (concentrations measurements) conditions are required, it poses as an excellent option when the distribution of solutes with high accuracy is required, easing environmental, economic and social management of coastal ecosystems.

Since fine powders tend strongly to adhesion and agglomeration, their processing with conventional methods is difficult or impossible. Typically, in order to enable the handling of fine powders, chemicals are added to increase the flowability and reduce adhesion. This contribution shows that instead of additives also vibrations can be used to increase the flowability, to reduce adhesion and cohesion, and thus to enable or improve processes such as precision dosing, mixing, and transport of very fine powders. The methods for manipulating powder properties are described in detail and prototypes for experimental studies are presented. It is shown that the handling of fine powders can be improved by using low-frequency, high-frequency or a combination of low- and high-frequency vibration.

We use a regional scale photochemical transport model to investigate the surface concentrations and column integrated amounts of ozone (O3) and nitrogen dioxide (NO2) during a pollution event that occurred in the St. Louis metropolitan region in 2012. These trace gases will be two of the primary constituents that will be measured by TEMPO (Tropospheric Emissions: Monitoring of Pollution), an instrument on a geostationary platform, which will result in a dataset that has hourly temporal resolution during the daytime and ~4 km spatial resolution. Although air quality managers are most concerned with surface concentrations, satellite measurements provide a quantity that reflects a column amount, which may or may not be directly relatable to what is measured at the surface. Our model results provide reasonably good agreement with observed surface O3 concentrations (correlation coefficients ranging from 0.69 to 0.87 at each of the nine monitoring stations in the St. Louis region), which is the only trace gas dataset that can be used for verification. The model shows that a plume of O3 extends downwind from St. Louis and contains an integrated amount of ozone of ~ 16 Dobson Units (DU; 1 DU = 2.69 x 1016 molecules cm-2), an amount lower than what was observed during two massive pollution episodes in the 1980s. Based on the smaller isolatable emissions coming from St. Louis, this quantity is not unreasonable, but may also reflect the reduction of photochemical ozone production due to the implementation of emission controls that have gone into effect since the 1980s.

Membrane-coupled RNA transport is an emerging theme in fungal biology. This review focuses on the RNA cargo and mechanistic details of transport via two inter-related sets of organelles: endosomes and extracellular vesicles for intra- and intercellular RNA transfer. Simultaneous transport and translation of messenger RNAs (mRNAs) on the surface of shuttling endosomes is a conserved process pertinent to highly polarised eukaryotic cells, such as hyphae or neurons. Here we detail the endosomal mRNA transport machinery components and mRNA targets of the core RNA-binding protein Rrm4. Extracellular vesicles (EVs) are newly garnering interest as mediators of intercellular communication, especially between pathogenic fungi and their hosts. Landmark studies in plant-fungus interactions indicate EVs as a means of delivering various cargos, most notably small RNAs (sRNAs), for cross-kingdom RNA interference. Recent advances and implications of the nascent field of fungal EVs are discussed and potential links between endosomal and EV-mediated RNA transport are proposed.

The spread of charging infrastructure (CIS) for battery electric vehicles is crucial for coping with the increasing number of electric vehicles. Therefore, the selection of ideal (fast-) charging locations determines acceptance, utilization and, thus, the economic viability of a single site or the whole charging network. The methodology of the Integrated Model Approach STELLA[1] for site identification of CIS uses proven methods of traffic modeling such as the classic four-step traffic modeling in a new context to enable statements regarding the positioning of CIS. Based on different spatial analyzes and characterizations of urban quarters, traffic generated by individuals is calculated using the FGSV approach of 2010. Because only (electric) motorized individual traffic is of importance for CIS, the share of trips is calculated by differentiating the modal split between various transport groups. One approach is to concretize the modal split share of public transport based on analyzes of different criteria and data sets, e.g. the accessibility of stops. The model approach STELLA, which also combines various extensive data (e.g. transport networks and traffic volumes, settlement structures, vehicle characteristics, power supply data and user requirements), is currently developed for a planning area covering the entire territory of the Federal Republic of Germany. [1] STELLA is the acronym for the German term "STandortfindungsmodell für ELektrische LAdeinfrastruktur”.

Roundabouts need capacity and safety improvements compatible with manual-driven, not only with autonomous vehicles. The signaling and control of roundabouts must evolve and incorporate current technologies. For that, we approach roundabouts as synchronous switches of vehicles. This paper describes Synchronous Roundabouts with Rotating Priorities, a roundabout control system based on vehicle platoons arriving at the roundabout at speed identical to the roundabout and within the time slot assigned to their entry, avoiding conflicts and stops, thus increasing roundabout capacity and safety. Signaling is visual for human drivers and also wireless for connected and autonomous vehicles. We evaluate analytically and with simulations roundabouts of different radius for several values of the average distance between vehicles. Average delays are 28,7 % lower, with negligible dispersion. The capacity improvements depend on design parameters: in our set is moderate for small roundabouts but goes up to 70-100 % for short distances and medium and large roundabouts.

Coupling the Maxwell tensor to the Riemann-Christoffel curvature tensor is shown to lead to a geometricized theory of electrodynamics. While this geometricized theory leads directly to the classical Maxwell equations, it also extends their interpretation by giving charge density and mass density, and the four-velocity that describes their motion geometric definitions. These geometric definitions are reminiscent of General Relativity’s interpretation of mass in terms of the scalar curvature R and hint at the emergence of gravity. The gravitational theory that does emerge is shown to be equivalent to Einstein’s General Relativity augmented by an energy-momentum tensor term that mimics the properties of dark matter and/or dark energy. In summary, the proposed geometrization of the Maxwell tensor puts both electromagnetic and gravitational phenomena on an equal footing with both being tied to the curvature of space-time. Using specific solutions to the proposed theory, the unification brought to electromagnetic and gravitational phenomena, as well as the relationship of those solutions to the corresponding solutions of the classical Maxwell and Einstein field equations are compared.

: E-commerce sales surge represents a huge challenge for urban freight transport. Parcel lockers constitute a valid solution for addressing the challenges home deliveries imply. In fact, eliminating courier-consumer contact (also relevant for health-related issues, as made evident by COVID19 pandemic) and delivering in few predefined places might help coping with missed deliveries substantially. Furthermore, this option enables consolidated shipping and reducing delivery trip costs. This paper analyses and compares consumers’ preferences for alternative collection strategies. It investigates home delivery vs parcel locker use and forecasts their future market shares. This is performed based on both customers’ socio-economic variables and attributes characterising these alternative logistic fulfilment strategies. The case study considered rests upon a stated preference survey deployed in the city of Rome. The investigation specifically targets young people (i.e., population under 30 years) since they represent early adopters. Discrete choice models allow both quantifying the monetary value of parcel lockers attributes (i.e., willingness to pay measures) and estimating the potential demand for this innovative delivery scheme. Results show that distance and accessibility are the main choice determinants. Furthermore, there is an overall high propensity to adopt parcel lockers. This research can support policymakers when implementing such solutions.

The impact of an unlicensed low-cost taxi in Bangladesh is very severe, especially in municipal cities. Day by day the numbers of unlicensed low-cost taxi are increasing by jumping up and creating pressure on traffic and transportation system. The aim of this study is to find out the causes of increasing illegal taxi and the extent of this vehicle in the municipalities of Bangladesh. Pabna municipality is used as a case study due to the more activeness of illegal taxi then the other municipalities. To achieve the objectives, the researcher used a qualitative approach to acquire more depth about the problems. Besides a direct observation of the study area, an open-ended questionnaire survey and HIS survey were conducted. The illegal low-cost taxi is very active it was analyzed through the field survey. A statistical model was developed to understand the actual causes of increasing illegal low-cost taxi, where ten predicted hypotheses (age, education level, marital status and family member support of illegal drivers, and the variable of commuter satisfaction e.g. safety, comfort, continuous service, affordability of service, reliability of service and driver behavior) were tested. The model was run through the multiple regression analyses technique in SPSS and the result proved that education level of illegal low-cost taxi drivers, and the commuter satisfaction variable (safety and comfort) had a positive and significant effect of increasing illegal low-cost taxi in the study area. However other variable had no significant effect in case of increasing illegal low-cost taxi. Besides the safety and comfort, steady job for the operators, provision of continuous, individual and door to door service system are the main reasons for increasing the illegal low-cost taxi in the study area. Finally, the researcher concludes with the requirement of some necessary action from the responsible authority on vehicular regulation for the improvement of the local public transport system in Bangladesh.

Legumes are important sources of nitrogen and, therefore, the nitrogen fixing ability of the legume-rhizobia symbiosis has great potential to improve crop yields or reduce nitrogen fertilizer use. Unfortunately, legumes face serious and increasing threats of both biotic and abiotic stresses among which Fe-deficiency has been increased from past years. Fe nutrient deficiency limits pulse production and nitrogen fixation by specifically affecting any one of the four phases of legume-rhizobium symbiosis. Although Fe in soil is often present in adequate quantities, it is mainly present in insoluble Fe-(III) precipitates, limiting its uptake and utilization. The present review has focused on the iron nutrition and deficiency and probable uptake, transport and metabolism in legumes.

In this paper is discussed sediment transport as a mechanical process that characterises a natural stream or channel flow regime. The objective of experimental work presented in this paper is to recall and to give another prospect of well-known Meyer-Peter and Müller approach for estimation of Shield’s number (θ_c,θ) in laboratory conditions, and calibration of dimensionless MPM number (A). For this purpose two different experiments are conducted, during the first experiment water amount flushed on the flume and bed slope was changed simultaneously until equilibrium state is achieved, meanwhile is estimated the critical Shield’s number (θ_c). While, during the second experiment, water amount was kept constant, only bed slope of flume was continuously tilted, meanwhile sediment, discharge and Shield’s number (θ) was determined for given hydraulic conditions. In addition calibration of dimensionless MPM number (A) was performed, where several iteration were considered until for (A=3.42), sediment discharge measured become almost equal with sediment discharge computed by using MPM formula. After these experiments, is concluded that MPM formula can be used also for other certain initial condition and similar procedure may be adopted to calibrate the dimensionless MPM number (A) .

In the smart city, information and communications technologies (ICTs) are proposed as solutions to urban challenges, including sustainability concerns. While sustainability commonly refers to economic and environmental dimensions, the concept also contains a social component. Our study asked how smartphone applications (apps) address social sustainability challenges in urban transport, if at all. We focused on transport disadvantages experienced due to low income, physical disability, and language barriers. A review of 60 apps showed that transport apps respond to these equity and inclusion issues in two ways: (a) by employing universal design in general-use apps; including cost-conscious features; and providing language options (b) by specifically developing smartphone apps for persons with disabilities. The article discusses the study by positioning it in the literature of smart cities as well as socially sustainable transport.

The field of Cooperative Intelligent Transport Systems and more specifically Pedestrians to Vehicles could be characterized as quite challenging, since there is a broad research area to be studied, with direct positive results to society. Pedestrians to Vehicles is a type of Cooperative Intelligent Transport System, within the group of Early Warning Collision/Safety System. In this article, we examine the research and applications carried out so far within the field of Pedestrians to Vehicles Cooperative Transport Systems by leveraging the information coming from Vulnerable Road Users’, smartphones. Moreover, an extensive literature review has been carried out in the fields of Vulnerable Road Users Outdoor Localisation via smartphones and Vulnerable Road Users Next Step/Movement Prediction, which are closely related to Pedestrian to Vehicle applications and research. We identify gaps that exist in these fields that could be improved/extended/enhanced or newly developed, while we address future research objectives and methodologies that could support the improvement/development of those identified gaps.

Mercury is a toxic pollutant emitted from both natural sources and through human activities. A global interest in atmospheric mercury has risen ever since the discovery of the Minamata disease in 1956. Properties of gaseous elemental mercury enable long range transport which can cause pollution even in pristine environments. Total gaseous mercury (TGM) was measured from winter 2016 to spring 2017 over the Baltic Sea. A Tekran 2357A mercury analyser was installed aboard the research and icebreaking vessel Oden for the purpose of continuous measurements of gaseous mercury in ambient air. Measurements were performed during a campaign along the Swedish east coast and in the Bothnian Bay near Lulea during the icebreaking season. Data was evaluated from Gothenburg using a plotting software and back trajectories for air masses were calculated. The TGM average of 1.365 ± 0.054 ng/m³ during winter and 1.288 ± 0.140 ng/m³ during spring was calculated as well as a total average of 1.362 ± 0.158 ng/m³. Back trajectories showed a possible correlation of anthropogenic sources elevating the mercury background level in some areas. There were also indications of depleted air, i.e., air with lower concentrations than average, being transported from the Arctic to northern Sweden resulting in a drop in TGM levels.

Fossils constitute the principal repository of data that allow for independent tests of hypotheses of biological evolution derived from observations of the extant biota. Traditionally, transformational series of structure, consisting of sequences of fossils of the same lineage through time, have been employed to reconstruct and interpret morphological evolution. More recently, a move toward an updated paradigm was fueled by the deliberate integration of developmental thinking in the inclusion of fossils in reconstruction of morphological evolution. The vehicle for this is provided by structural fingerprints – recognizable morphological and anatomical structures generated by (and reflective of) the deployment of specific genes and regulatory pathways during development. Furthermore, because the regulation of plant development is both modular and hierarchical in nature, combining structural fingerprints recognized in the fossil record with our understanding of the developmental regulation of those structures produces a powerful tool for understanding plant evolution. This is particularly true when the systematic distribution of specific developmental regulatory mechanisms and modules is viewed within an evolutionary (paleo-evo-devo) framework. Here, we discuss several advances in understanding the processes and patterns of evolution, achieved by tracking structural fingerprints with their underlying regulatory modules across lineages, living and fossil: the role of polar auxin regulation in the cellular patterning of secondary xylem and the parallel evolution of arborescence in lycophytes and seed plants; the morphology and life history of early polysporangiophytes and tracheophytes; the role of modularity in the parallel evolution of leaves in euphyllophytes; leaf meristematic activity and the parallel evolution of venation patterns among euphyllophytes; mosaic deployment of regulatory modules and the diverse modes of secondary growth of euphyllophytes; modularity and hierarchy in developmental regulation and the evolution of equisetophyte reproductive morphology. More generally, inclusion of plant fossils in the evo-devo paradigm has informed discussions on the evolution of growth patterns and growth responses, sporophyte body plans and their homology, sequences of character evolution, and the evolution of reproductive systems.

Public Transport has been seen since ages as the most environmentally sustainable mode of transport. The users of public transport are diverse and have different socio-economic character. Hence the public transport which is not only supposed to be environmentally sustainable but also envisaged to ensure equity amongst various stakeholders of society like the females, elderly and other vulnerable groups through its service. Gender in binary terms of being differentiated based on men and women is a social construct. Public transport systems in developing countries like India witness socio-cultural factors that shape the experience of women in public spaces by social norms extant in society. Along with this, gender-based issues related to public transport are social and behavioural shortcomings as a consequence of a lack of gender sensitivity. On similar lines, elderly have a negative experience involving safety threats, physical and psychological discomfort while accessing public transport systems. The literature published regarding such issues on the gender and elderly question in public transport systems have been studied and has been brought forth under a stand- alone narrative literature review. A literature review is a prerequisite to conducting either stand-alone reviews or as a preliminary study to be supported with quantitative or qualitative analysis. Here, a stand-alone literature review concerning issues in the public transport system in India has been performed. A narrative type of review is conducted to provide an overview of pre- existing published literature. Narrative overviews are useful educational articles as they help present a broad perspective on a topic and often define the development of a problem and/or ways to manage it. The semi-systematic or narrative-review approach is designed for topics that have been theorized differently and studied within diverse disciplines making it unfavourable to study under a full systematic-review process which majorly caters to reviewing quantitative researches. As narrative-styled literature reviews prefer a semi- systematic data collection method, utmost care has been taken to include perspectives from diverse disciplines. The scope of this review is restricted to summarizing the Indian policies, schemes of public transport in light of socio-equity consideration while narrowing the inherent discrepancies within the socio-cultural ethos of the Indian society which influences socio-equity consideration in public spaces in general and the modes of public transport in particular. Research articles from electronic databases were selected based on relevance to understand the issues this viewpoint, their essential findings and possible recommendations are formulated to provide a comprehensive summary of previous researches.

Today, transit control systems go beyond simple controllers located at the intersections of our streets, involving large companies in the field, which with the implementation and use of sophisticated equipment encompass endless new and advanced technologies that manage to give control to the massive automotive park, thus ensuring fluidity and road safety. Many of these systems are used in the big world capitals, which is why the model used in Santiago, Chile is a system applied and brought directly by the SIEMENS Company of England (specifically the system used in the City of London). It is capable of transmitting the different control signals in a similar and digital way from the different interconnected devices in and out of the road infrastructure.

According to the changed operative conditions due to lockdown and successive reopening a number of facts can be analysed. The main effects have been detected on: mobility, environment, social media and people flows. While in this first report only mobility, transport and environment are reported. The analysis performed identified a strong reduction of the mobility and transport activities, and in the pollutants. The mobility reduction has been assessed to be quite coherent with respect to what has been described by Google Global mobility report. On the other hand, in this paper a number of additional aspects have been put in evidence providing detailed aspects on mobility and parking that allowed us to better analyze the impact of the reopening on an eventual revamping of the infection. To this end, the collected data from the field have been compared from those of google and some considerations with respect to the Imperial college Report 20 have been derived. For the pollutant aspects, a relevant reduction on most of them has been measured and rationales are reported.

BTB domain and CNC homology 1 (BACH1) is a highly expressed transcription factor in tumors including breast and lung, relative to their non-tumor tissues. BACH1 is known to regulate multiple physiological processes including heme homeostasis, oxidative stress response, senescence, cell cycle, and mitosis. In a tumor, BACH1 promotes invasion and metastasis of cancer cells, and the expression of BACH1 presents a poor outcome for cancer patients including breast cancer patients. Recent studies identified novel functional roles of BACH1 in the regulation of metabolic pathways in cancer cells. BACH1 inhibits mitochondrial metabolism through transcriptional suppression of mitochondrial membrane genes. In addition, BACH1 suppresses activity of pyruvate dehydrogenase (PDH), a key enzyme that converts pyruvate to acetyl-CoA for the citric acid (TCA) cycle through transcriptional activation of pyruvate dehydrogenase kinase (PDK). Moreover, BACH1 increases glucose uptake and lactate secretion in aerobic glycolysis through the expression of metabolic enzymes involved such as hexokinase 2 (HK2) and glyceraldehyde 3- phosphate dehydrogenase (GAPDH). Pharmacological or genetic inhibition of BACH1 could reprogramme metabolic pathways, subsequently rendering metabolic vulnerability of cancer cells. Furthermore, inhibition of BACH1 decreased antioxidant-induced glycolysis rates as well as reduced migration and invasion of cancer cells, suggesting BACH1 as a potentially useful cancer therapeutic target.

Surface passivation, which has been intensively studied recently, is essential for the perovskite solar cells (PSCs), due to the intrinsic defects in perovskite crystal. A series of chemical or physical methods have been published for passivating the defects of perovskite, which effectively suppressed the charge recombination and enhanced the photovoltaic performance. In this study, the n-type semiconductor of [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) is dissolved in chlorobenzene (CB) for the surface passivation during the spin-coating process for depositing the two-dimensional (2D) perovskite film. This approach simplifies the fabrication process of 2D PSCs and benefits the film quality. As a result, the defects of perovskite film are effectively passivated by this method. A better perovskite/PCBM heterojunction is generated, exhibiting an increased film coverage and improved film morphology of PCBM. It is found that this technology results in an improved electron transporting performance as well as suppressed charge recombination for electron transport layer. As a result, PSCs based on the one-step formed perovskite/PCBM heterojunctions exhibit the optimized power conversion efficiency of 15.69% which is about 37% higher than that of regular perovskite devices. The device environmental stability is also enhanced due to the quality-improved electron transport layer.

The formal transfer of GNSS under water is not possible. It probably makes sense to talk only about the transformation of GPS into LPS, that is, in the Local Position System. However, the basic methods that are used to solve the problem of Spoofing Detection above water can be used under water. It should be understood that engineering problems are significantly different, since the nature of the propagation of acoustic waves in water and electromagnetic waves in the atmosphere are fundamentally different. In this article, we will limit the navigation with acoustically passive receiver. The receiver “listens” to the buoys and solves the problem of finding its own position based on the coordinates of the buoys (such systems are called GNSS-like Underwater Positioning Systems or GNSS-like UPS). Depending on the scale of system service areas, GNSS-like UPS are divided into global, regional, zonal and local system. In this article, we will limit ourselves to considering only local GNSS-like UPS. The acoustic signal generator transmits a signal simulation of several satellites. If the level of the simulated signal exceeds the signal strength of real satellites, the receiver of UPS will “capture” the fake signal and calculate the false position based on it.

Micromobility has gained attention from policymakers, industry stakeholders, and academia; however, a comprehensive conceptualization of micromobility is still missing. Existing definitions are largely vehicle-centric: either listing modes or detailing vehicle characteristics. This paper addresses this gap by developing a ‘beyond vehicles’, multi-dimensional conceptualization of micromobility, accompanied by a novel socio-technical definition. Through a review of related concepts, combined with an analysis of the use and definitions of the term micromobility in publications, this study establishes a new conceptualization of micromobility. It incorporates human, social, and cultural dimensions, considers environmental, economic, infrastructure, vehicle technology, regulatory and policy aspects, and considerations for public health. Our definition of micromobility encompasses a wide range of mobility options typically used for shorter trips and manoeuvrable by an individual without motor assistance, at least for short distances. These modes are characterized by their ‘micro’ attributes, including low energy demand, environmental impact, and road space use relative to automobility. The conceptualization incorporates a range of micromobility modes, including fully human-powered (including walking), partially motor-assisted, and fully powered options. These modes typically operate at speeds not exceeding 25 to 32 kilometres per hour (or 45 km/h for faster options), weigh (typically substantially) below 350 kilograms and often yield significant (public) health benefits. Trip length is generally less than 15 kilometres, and daily distances under 80 kilometres. Importantly, our definition includes the practices, policies, cultures, and infrastructures that emerge around the use of micromobility options and shape their uptake. This proposed conceptualization significantly broadens the prevailing vehicle-focus in micromobility debates towards a socio-technical perspective. Embracing a widely accepted conceptualisation of micromobility would offer several advantages, including robust design standards, legislation, and evaluation metrics and methods. Additionally, this paper highlights the pivotal role micromobilities can play in transcending the limitations of automobility, towards more sustainable and equitable mobility futures.

In this report we have discussed the important role of molecular modeling, especially the use of the molecular dynamics method, in investigating transport processes in nanoporous materials such as membranes. With the availability of high performance computers, molecular modeling can now be used to study rather complex systems at a fraction of the cost or time requirements of experimental studies. Molecular modeling techniques have the advantage of being able to access spatial and temporal resolution which are difficult to reach in experimental studies. For example, sub-Angstrom level spatial resolution is very accessible as is sub-femtosecond temporal resolution. Due to these advantages, simulation can play two important roles: Firstly because of the increased spatial and temporal resolution, it can help understand phenomena not well understood. As an example, we discuss the study of reverse osmosis processes. Before simulations were used it was thought the separation of water from salt was purely a coulombic phenomenon. However, by applying molecular simulation techniques, it was clearly demonstrated that the solvation of ions made the separation in effect a steric separation and it was the flux which was strongly affected by the coulombic interactions between water and the membrane surface. Additionally, because of their relatively low cost and quick turnaround (by using multiple processor systems now increasingly available) simulations can be a useful screening tool to identify membranes for a potential application. To this end, we have described our studies in determining the most suitable zeolite membrane for redox flow battery applications. As computing facilities become more widely available and new computational methods are developed, we believe molecular modeling will become a key tool in the study of transport processes in nanoporous materials.

Reemergence of deep Neural Networks (CNNs) has lead to high-performance supervised learning algorithms for the Electro-Optical (EO) domain classification and detection problems. This success is possible because generating huge labeled datasets has become possible using modern crowdsourcing labeling platforms such as Amazon Mechanical Turk that recruit ordinary people to label data. Unlike the EO domain, labeling the Synthetic Aperture Radar (SAR) domain data can be a lot more challenging and for various reasons using crowdsourcing platforms is not feasible for labeling the SAR domain data. As a result, training deep networks using supervised learning is more challenging in the SAR domain. In the paper,we present a new framework to train a deep neural network for classifying Synthetic Aperture Radar (SAR) images by eliminating the need for huge labeled dataset. Our idea is based on transferring knowledge from a related EO domain problem, where labeled data is easy to obtain. We transfer knowledge from the EO domain through learning a shared invariant cross-domain embedding space that is also discriminative for classification. To this end, we train two deep encoders that are coupled through their last year to map data points from the EO and the SAR domains to the shared embedding space such that the distance between the distributions of the two domains is minimized in the latent embedding space. We use the Sliced Wasserstein Distance (SWD) to measure and minimize the distance between these two distributions and use a limited number of SAR label data points to match the distributions class-conditionally. As a result of this training procedure, a classifier trained from the embedding space to the label space using mostly the EO data would generalize well on the SAR domain. We provide theoretical analysis to demonstrate why our approach is effective and validate our algorithm on the problem of ship classification in the SAR domain by comparing against several other learning competing approaches.

The aim of this study is to introduce a novel method which can separate sand or gravel dominated bed load transport in rivers with mixed-size bed material. In engineering practice, the Shields-Parker diagram could be used for such purposes, however, the method has certain applicability limits, due to the fact that it is based on uniform bed material and provides information rather on river-scale, instead of reach or local scale. When dealing with large rivers with complex hydrodynamics and morphodynamics the bed load transport modes can also indicate strong variation even locally, which requires a more suitable approach to estimate the locally unique behavior of the sediment transport. Here, we suggest that the decision criteria utilizes the shear Reynolds number (Re*). The method was verified against field and laboratory measurement data, both performed at non-uniform bed material compositions. The comparative assessment of the results show that the shear Reynolds number based method operates more reliably than the Shields-Parker diagram and it is expected to predict the sand or gravel transport domination with a < 5% uncertainty. The introduced results can greatly contribute to the improvement of numerical sediment transport modeling as well as to the field implementation of bed load transport measurements.

Sediment transport is highly sensitive to flow conditions, showing significant increase during flood events. Based on this principle, this study set out to rank flood events occurring along river Trotuș (Romania) based on the amount of transported sediment and event duration. The 77 flood events recorded from 2000 to 2017 were ranked into 4 classes: type A (4%); type B (16%), type C (14%) and type D (66%). The sediment transport specific for the 4 types of flood events was related to the flow discharge (sediment rating curve and hysteresis effect), the specific stream power and the energy expenditure of these events. More than 60% of the hysteresis loops typical for flood events were clockwise, thus singling out the channel as the main sediment source. Ca. 74% of the total sediment yield was transported at stream power values higher than the 300 Wm-2 threshold, which was exceeded in less than 1% of the investigated timeframe. The changes occurring in the sediment transport rates after major floods show that these events are significant thresholds in the hydrogeomorphic evolution of river channels.

The Simplified Spherical Harmonic (SPN) approximation was first introduced as a three-dimensional (3-D) extension of the plane-geometry Spherical Harmonic (PN) equations. A third order SPN (SP3) solver, recently implemented in the Nodal Expansion Method (NEM), has shown promising performance in the reactor core neutronics simulations. This work is focused on the development and implementation of the transport corrected interface and boundary conditions in NEM SP3 solver, following recent published work on the rigorous SPN theory for piecewise homogeneous regions. A streamlined procedure has been developed to generate the flux zero and second order/moment discontinuity factors (DFs) of the generalized equivalence theory to eliminate the error introduced by pin-wise homogenization. Moreover, several color set models with varying size and configuration are later explored for their capability of generating DFs that can produce results equivalent to that using the whole-core homogenization model for more practical implementations. The new developments are tested and demonstrated on the C5G7 benchmark. The results show that the transport corrected SP3 solver shows general improvements to power distribution prediction compared to the basic SP3 solver with no DFs or only zero order/moment DFs. The complete equivalent calculations using the DFs can almost reproduce transport solutions with high accuracy. The use of equivalent parameters from larger size color set models show better prediction in the whole-core calculations. By coupling different color set models DFs can offer the best accuracy at both eigenvalues and power distributions.

Daily thousands of people and goods move along Brazilian Federal highways. Traffic accidents are numerous on these highways and have a significant impact, whether on the economy or the health system. Identifying predictor variables, the probability of an event occurring and how to mitigate them are of paramount importance for the actions of the transit authorities that manage these roads. The main contribution of this study is the development of a predictive machine learning model which uses open data to shows graphically the critical points in the highways. This model is fully reproducible and can be applied to any region worldwide helping to minimize the number of accidents and to prevent deaths by automotive collisions. For this study, 43 variables were analyzed supporting the identification of the causes of accidents with fatal victims on the main highways in the south of Brazil. RoadLytics is proposed as a supervised machine learning model, using the Random Forest algorithm to analyze about 33 thousand occurrences between 2017 and 2020. An exploratory analysis of the data was carried out to support the modeling and to facilitate data visualization. In this sense, heat maps were developed to support the analysis and identification of potential risk areas. The results show that BR386 highway registers the highest number of fatal occurrences, regardless of the season. Additionally, concerning the weather conditions, the analysis shows that 52% of accidents occurred in favorable conditions, such as clear skies, victimizing 501 people. The driver’s lack of attention is the main reason for the accidents’ occurrences. Applying the developed model, an accuracy of 77% was achieved for the classification of fatal accidents.

Transport Layer Security (TLS) is a cryptographic protocol that provides communications security between two peers and it is widely used in many applications. To reduce the latency in TLS handshake session resumption using pre-shared key (PSK) had been used. But current methods in PSK mode handshake uses a fixed session key multiple times for the lifetime of session ticket. Reuse of fixed session key should be very careful in the point of communications security. It is vulnerable to replay attacks and there is a possibility of tracking users. Paired token (PT) is a new secondary credential scheme that provides pre-shared key in stateless way in client-server environment. Server issues paired token (public token and secret token) to authenticated client. Public token represents signed identity of client and secret token is a kind of shared secret between client and server. Once client is equipped with PT, it can be used for many symmetric key based cryptographic applications such as authentication, authorization, key establishment, etc. It was also shown that it can be used for one-time authenticated key establishment using the time-based one-time password (TOTP) approach. In this paper we apply the PT and TOTP approach to TLS to achieve stateless one-time authenticated session resumption. Server executes full handshake of TLS 1.3 and issues PT to authenticated client. Then client and server can execute one-time authenticated session resumption using PT in stateless way in server side. In every runs of session resumption distinct session keys are established that the same PT can be used safely for longer lifetime. If anonymous PT is used with renewal issuing, user privacy, untraceability and forward security can be achieved easily. It will provide a huge performance gain in large-scale distributed services.

Classical k-ratio models, e.g. ZAF and phi(rho z), used in electron probe microanalysis (EPMA) assume a homogeneous or multi-layered material structure, which essentially limits the spatial resolution of EPMA to the size of the interaction volume where characteristic x-rays are produced. We present a new model for characteristic x-ray emission that avoids assumptions on the material structure to not restrict the resolution of EPMA a-priori. Our model bases on the spherical harmonic (PN) approximation of the Boltzmann equation for electron transport in continuous slowing down approximation. PN models have a simple structure, are hierarchical in accuracy and well-suited for efficient adjoint-based gradient computation, which makes our model a promising alternative to classical models in terms of improving the resolution of EPMA in the future. We present results of various test cases including a comparison of the PN model to a minimum entropy moment model as well as Monte-Carlo (MC) trajectory sampling, a comparison of PN-based k-ratios to k-ratios obtained with MC, a comparison with experimental data of electron backscattering yields as well as a comparison of PN and Monte-Carlo based on characteristic X-ray generation in a three-dimensional material probe with fine structures.

Traffic source emissions inventories for the rapidly growing West African urban cities are necessary for better local characterization of vehicle emissions released into these cities atmosphere. This study based on local field campaign in a representative site of anthropogenic activities over West African cities such as Yopougon (Abidjan, Côte d'Ivoire) during 2016, provided useful information on vehicle type and age, traveling time, fuel type and amount for fuel consumption estimation. Also, high traffic flow of personal car were recorded on highway, boulevard and backstreet whereas high flows of intra-communal sedan taxi are recorded on main and secondary roads. In addition, the highest daily fuel consumption value of 56 L.day^-1 was recorded in heavy vehicle while the lowest value of 15 L.day^-1 is recorded for personal car using gasoline. This study will be useful for the improvement of uncertainties related to the different databases used to estimate inventories emissions either national or international reports. This work provides useful information for future studies on urban air quality, climate and health impacts assessment in African cities. It may also be useful for policy makers to support implementation of emission reduction policy in West African cities.

We report the electronic, magnetic and transport properties of a prototypical antiferromagnetic (AFM) spintronic device. We chose Cr as the active layer because it is the only room-temperature AFM elemental metal. We sandwiched Cr between two non-magnetic metals (Pt or Au) with large spin-orbit coupling. We also inserted a buffer layer of insulating MgO to mimic the structure and finite resistivity of a real device. We found that, while spin-orbit has a negligible effect on the current flowing through the device, the MgO layer plays a crucial role. Its effect is to decouple the Cr magnetic moment from Pt (or Au) and to develop an overall spin magnetization. We have also calculated the spin-polarized ballistic conductance of the device within the Büttiker-Landauer framework, and we have found that for small applied bias our Pt/Cr/MgO/Pt device presents a spin polarization of the current amounting to ~25%.

Leucokinins (LKs) constitute a family of neuropeptides identified in numerous insects and many other invertebrates. The LKs act on G-protein coupled receptors that display only distant relations to other known receptors. In adult Drosophila, 26 neurons/neurosecretory cells of three main types express LK. The four brain interneurons are of two types, and these are implicated in several important functions in the fly’s behavior and physiology, including feeding, sleep-metabolism interactions, state-dependent memory formation, as well as modulation of gustatory sensitivity and nociception. The 22 neurosecretory cells (ABLKs) of the abdominal neuromeres coexpress LK and a diuretic hormone (DH44), and together these regulate water and ion homeostasis and associated stress, as well as food intake. In Drosophila larvae, LK neurons modulate locomotion, escape responses, and aspects of ecdysis behavior. A set of lateral neurosecretory cells, ALKs, in the brain express LK in larvae, but inconsistently so in adults. These ALKs coexpress three other neuropeptides and regulate water and ion homeostasis, feeding and drinking, but the specific role of LK is not yet known. This review summarizes Drosophila data on embryonic lineages of LK neurons, functional roles of individual LK neuron types, interactions with other peptidergic systems, and orchestrating functions of LK.

Effective maintenance of railways requires a comprehensive assessment of the actual condition of the construction materials involved. In this regard, Ground-Penetrating Radar (GPR) stands as a viable alternative to the invasive and time-consuming traditional techniques for the inspection of these infrastructures. This work reports the experimental activities carried out on a test-site area within a railway depot in Rome, Italy. Specifically, a 30 m-long railway section was divided into 10 sub-sections reproducing different various physical and structural conditions of the track-bed. In more detail, combinations of varying scenarios of fragmentation and fouling of the ballast were reproduced. The set-up was then investigated using different multi-frequency GPR horn antenna systems. The effects of the different physical conditions of ballast on the electromagnetic response of the material were analysed for each scenario using time- and frequency-domain signal processing techniques. Parallel to this, modelling was provided to estimate fouling content. Interpretation of results has proven the viability of the GPR method in detecting signs of decay at the network level, thereby proving this technique to be worthy for implementation in asset management systems.

A transport process was studied from an aqueous solution containing oxalic acid and 100 mg/L Ge using a flat sheet supported liquid membrane (FSSLM) system. Cyanex 923 immobilized in a polytetrafluoroethylene membrane was employed as a carrier. The solution chemistry and related diagrams were applied to study the transport of germanium. The effectual parameters such as oxalic acid, carrier concentration, and strip reagent composition were evaluated in this study. Based on the results, the oxalic acid concentration of 0.075 mol/L and the carrier concentration of 20 %v/v were the condition in which the efficient germanium transport occurred. Among strip reagents, NaOH (0.04-0.1 mol/L) had the best efficiency to transport germanium through the SLM system. Furthermore, the permeation model was obtained to calculate the mass transfer resistances of the membrane (Δ_m) and feed (Δ_f) phases. According to the results, the values of 1 and 1345 s/cm were evaluated for Δ_m and Δ_f, respectively.

Tissue engineering has the potential for repairing large bone defects, which impose a heavy financial burden on the public health. However, difficulties with O₂ delivery to the cells residing in the interior of tissue engineering scaffolds make it challenging to grow artificial tissues of clinically-relevant sizes. This study uses image-based simulation in order to provide insight into how to better optimize the scaffold manufacturing parameters, and the culturing conditions, in order to resolve the O₂ bottleneck. To do this, high resolution 3D X-ray images of two common scaffold types (salt leached foam and non-woven fiber mesh) are fed into a Lattice Boltzmann Method fluid dynamics and reactive Lagrangian Scalar Tracking mass transfer solvers. The obtained findings indicate that the scaffolds should have maximal surface area-to-solid volume ratios, for higher chances of the molecular collisions with the cells. Furthermore, the cell culture media should be flown through the scaffold pores as fast as practically possible (without detaching or killing the cells). Finally, we have provided a parametric sweep that maps how the molecular transport within the scaffolds is affected by variations in rates of O₂ consumption by the cells. Ultimately, the results of this study are expected to benefit the computer-assisted design of tissue engineering scaffolds and culturing experiments.

This paper sets out three visions for the year 2035 which bring about a radical change in the level of walking, cycling and public transport in Turkish urban areas. A participatory visioning technique was structured according to a three-stage technique: (i) Extensive online comprehensive survey. In which potential transport measures were researched for their relevance to promoting sustainable transport in future Turkish urban areas; (ii) Semi-structured interviews. Where transport strategy suggestions were developed in the context of the possible imaginary urban areas and their associated contextual description of the imaginary urban areas for each vision; (iii) Participatory workshops. Where an innovative method was developed to explore various creative future choices and alternatives. Overall, this paper indicates that the content of the visions was reasonable, but such visions need a considerable degree of consensus and radical approaches to tackling them.

Confidence in intermodal transport has not yet been defined. There are many different approaches to the concept of trust. However, the authors embedded them in the light of the challenges of sustainability, linking with the shift paradigm. The objective of the article is to indicate the directions and criteria for the implementation of the shift paradigm, inscribed in the idea of sustainable transport. The auxiliary objective is to predict which countries in a given year will have the TRUST status, i.e. implement the shift paradigm, and which will not implement it (DISTRESS). The article uses taxonometric techniques and built a model using General Discriminant Analysis. On their basis, the utility function was approximated, including the directions of implementation of the shift paradigm depending on the scale of the environmental load of transport. In the course of the research, an original and innovative econometric model was constructed, pointing to three variables, which had the greatest impact on trust. Thanks to the cognitive value of the model, it is possible to identify individuals who deserve the trust, i.e. it will implement the shift paradigm, with 93% probability. In the future, it is worth expanding the research by models for each country.

The Particulate Matter (PM), particles of variable but small diameter could penetrate the respiratory system via inhalation, causing respiratory and/or cardiovascular diseases. This study aims to evaluate the association of environmental particulate matter (PM2.5) and black carbon (BC) with respiratory health and physical activity in users traveling by transportation modes over four roads in Bogotá. This was a mixed-method study, in 300 healthy participants, based on a convergent parallel design. Including a descriptive qualitative component focused on asserting the individual perception of air pollution by semi-structured interviews and a cross-sectional study measuring the individual exposure to PM2.5 and BC to evaluate the pulmonary function by spirometry. The analysis included concurrent triangulation and a Poisson regression. This study provides integration of air pollution exposure variables and respiratory health effects in different transport microenvironments. To our knowledge, this is the first mixed-methods study focused on PM2.5, BC, and respiratory health effects in a city above 2.000 meters above sea level.

During the recent decades, global warming by greenhouse gas evolution has attracted worldwide attention and evermore strict regulations thereon have become institutionalized as international policies. In the process, more environment-friendly power generation technologies have been developed utilizing fossil fuels with a view to timely commercialization. As one of such “clean coal” technology, Integrated Gasification Fuel Cell system is a promising power generation means and COS hydrolysis reactor is installed downstream of coal syngas to remove acidic gas constituents such as H2S and COS. The most significant design parameters affecting performance of the COS hydrolysis reactor were selected to be GHSV, (catalytic) reaction temperature, and length ratio and numerical modeling was performed considering heat and fluid flow transfer as well as chemical reaction kinetics. Effect of the selected design parameters on the variation of conversion rate and reactant gas mixture concentration were comprehensively investigated to predict performance of COS hydrolysis reactor. Stochastic modeling of reactor performance was finally performed using Monte Carlo simulation and linear regression fitting.

Global warming and climate change have led to extreme changes in climatic conditions in recent years. The Taiwan government designates the construction of the Kinmen County as low carbon islands, to promote the operation of 100 electric motorcycles and battery demonstration. This study combined with island tourism, after boarding the island, visitors can rent electric motorcycles from the passenger service center and coordinate with the island tour map to show the location of the battery exchange points, so as to facilitate the search. During the operation, the amount of electric motorcycle lease is 15,551 times, the total mileage of motor vehicle is 284,404 km, the number of battery exchange is 622 times, the lease income is about NT$900,000. To reduce carbon and economic benefits of the assessment, compared to the motorcycles (50 c.c), electric motorcycles (EM 100) can reduce the carbon emissions by 8,726 kg, reducing energy costs of NT$422,594.

The 2019-2020 summer wildfire event on the east coast of Australia was a series of major wildfires occurring from November 2019 to end of January 2020 across the states of Queensland, New South Wales (NSW), Victoria and South Australia. The wildfires were unprecedent in scope and the extensive extend of the wildfires has caused smoke pollutants transported not only to New Zealand but across the Pacific Ocean to South America. At the height of the wildfires, smoke plumes were injected into the stratosphere at height up to 25km and hence transported across the globe. Based on meteorological and air quality simulation using WRF-Chem model, air quality monitoring data collected during the bushfire period and remote sensing data from MODIS and CALIPSO satellites, the extend of the wildfires and the pollutant transport, and their impacts on air quality and health on exposed population in NSW can be analysed. The results showed that WRF-Chem model using Fire Emission Inventory from NCAR (FINN) predicts the dispersion and transport of pollutants and the predicted concentration of PM2.5 and other pollutants from wildfires reasonably well when compared with ground-based and satellite data. The impact on health endpoints such as mortality, respiratory and cardiovascular diseases hospitalisation across the modelling domain is then estimated. The estimated health impact is comparable with previous study based only on observation data, but the results in this study provide much more detailed spatially and temporally with regards to the health impact from the 2019-2020 wildfire.

A mathematical expression to describe cation absorption of root is expressed with simulation results. The root cells selectively emit H+ ions with active transport consuming ATPs to establish electrical gradient. The gradient promotes external positive ions to flow into the roots, while carries negatively charged particles with symport. In this paper, a mathematical model whose independent variables are the concentrations of external and internal cation is presented. This differential equation is induced from Ohm’s law. The equation has terms for plant physiology, ion’s physical and electrical properties, growth of plant, and interaction between the root and the surroundings. Simulation showed that the physiology-related coefficient has important role on nutrition absorption.

The monocarboxylate transporters 8 (MCT8) and 10 (MCT10) are important for thyroid hormone (TH) uptake and signaling. Reduced TH activity is associated with impaired development, weight gain and discomfort. We hypothesized that autoantibodies (aAb) to MCT8 or MCT10 are prevalent in thyroid disease and obesity. Analytical tests for MCT8-aAb and MCT10-aAb were developed and characterized with commercial antiserum. Serum samples from healthy controls, thyroid patients and young overweight subjects were analyzed, and prevalence of the aAb was compared. MCT8-aAb were additionally tested for biological effects on thyroid hormone uptake in cell culture. Positive MCT8-aAb and MCT10-aAb were detected in all three clinical cohorts analyzed. MCT8-aAb were most prevalent in thyroid patients (11.9%) as compared to healthy controls (3.8%) and overweight adolescents (4.2%). MCT8-aAb positive serum reduced T4 uptake in cell culture in comparison to MCT8-aAb negative control serum. Prevalence of MCT10-aAb was highest in the group of thyroid patients as compared to healthy subjects or overweight adolescents (9.0% versus 4.5% and 6.3%, respectively). We conclude that MCT8 and MCT10 represent autoantigens in humans, and that MCT8-aAb may interfere with regular TH uptake and signaling. The increased prevalence of MCT8-aAb and MCT10-aAb in thyroid disease suggests that their presence may be of pathophysiological relevance. This hypothesis deserves an analysis in large prospective studies.

Intercellular transport of auxin is driven by PIN-formed (PIN) proteins. PINs are localized at the plasma membrane (PM) and on constitutively recycling endomembrane vesicles. Therefore, PINs can mediate auxin transport either by direct translocation across the PM or by pumping it into secretory vesicles (SVs), leading to its secretory release upon fusion with the PM. Which of these two mechanisms dominates is a matter of debate. Here we addressed the issue with a mathematical modeling approach. We demonstrate that the efficiency of secretory transport depends on SV size, half-life of PINs on the PM, pH, exocytosis frequency and PIN density. 3D-SIM microscopy was used to determine PIN density on the PM. Combing this data with published values of the other parameters, we show that the transport activity of PINs in SVs would have to be at least 1000x greater than on the PM in order to produce a comparable macroscopic auxin transport. If both transport mechanisms operated simultaneously and PINs were equally active on SVs and PM, the contribution of secretion to the total auxin flux would be negligible. In conclusion, while secretory vesicle-mediated transport of auxin is intriguing and theoretically possible model, it unlikely to be a major mechanism of auxin transport in planta.

Graphene and borophene are highly attractive two-dimensional materials with outstanding physical properties. In this study we employed a combined atomistic continuum multiscale modeling to explore the effective thermal conductivity of polymers nanocomposites made of PDMS polymer as the matrix and graphene and borophene as nanofillers. We first conduct classical molecular dynamics simulations to investigate the interfacial thermal conductance between graphene/PDMS and borophene/PDMS interfaces. Acquired results confirm that the interfacial thermal conductance between nanosheets and polymer increases from the single-layer to multilayered nanosheets and finally converges. The data provided by the atomistic simulations were then used in the finite element method simulations to evaluate the effective thermal conductivity of polymer nanocomposites at continuum level. We explore the effects of nanofillers type, their volume content, geometry aspect ratio and thickness on the nanocomposites effective thermal conductivity. As a very interesting finding, we show that borophene nanosheets, despite almost two orders of magnitude lower thermal conductivity than graphene, can yield very close enhancement in the effective thermal conductivity in comparison with graphene, particularly for low volume content and small aspect ratios and thicknesses. We conclude that for the polymer-based nanocomposites, significant improvement in the thermal conductivity can be reached by improving the bonding between the fillers and polymer or in another word enhancing the thermal conductance at the interface. By taking into account the high electrical conductivity of borophene, our results suggest borophene nanosheets as promising nanofillers to simultaneously enhance the polymers thermal and electrical conductivity.

Vase life is one of the most important factors that determine the marketability of cut flowers and is greatly affected by the water balance. In recent years, cut hydrangea flowers are increasingly consumed as decorations for various events. However, the vase life of cut hydrangea flowers varies greatly depending on the postharvest solution management. Therefore, this study investigated the vase life, solution uptake, water balance, and relative fresh weight of freshly harvested hydrangea (Hydrangea macrophylla ‘Verena’) according to the three types of holding solutions (tap water, 1% chrysal professional Ⅲ (CPⅢ), 2% sucrose + 250 mg/L 8-hydroxquinoline + 100 mg/L citric acid (SHQC)) and the combination solutions (pretreatment; tap water, 0.1% chrysal RVB (RVB), floralife quickdip (FQ), transport; tap water, CPⅢ, floralife clear (FC), preservatives; CPⅢ, FC) for each distribution stage (pretreatment-transport-consumer). In the preservative comparison experiment, compared with the control, CPⅢ treatment and SHQC treatment significantly increased the vase life in 2019 (0.7 days, 3.4 days) and 2020 (1.4 days, 3.1 days), respectively. In the comparative experiment by solution combination, the group (RVB, FQ) using the pretreatment significantly extended the vase life by 4.6 days and 5.9 days compared to the tap water treatment. It was also determined that the same treatment increased overall solution uptake, maintained water balance longer, and increased relative fresh weight. These results confirm the importance of holding solutions and pretreatments, suggesting that appropriate pretreatments and preservatives should be used to improve the marketability of cut hydrangea flowers.

Ecological connectivity, as a research method related to spatial ecology and conservation biology, has attracted increasing attention from researchers at home and abroad in recent years. Habitat connectivity, as a key link in ecological connectivity, is of great significance to promote offshore ecological restoration and protection. However, there has been less systematic research about habitat connectivity, which lacks corresponding theories and practices. Therefore, this paper discusses habitat connectivity from three aspects: (1) the concept of habitat connectivity is introduced and clarified, (2) the application of connectivity in artificial habitat and adjacent waters and its relationship with biodiversity conservation are reviewed and illustrated with examples, and (3) the future development trends of this research direction are summarized and prospected, in order to provide a scientific basis and useful reference for the related work of offshore restoration projects in China. Generally, this paper argues that an increase in human behavior irreversibly destroys the connectivity of marine habitats and threatens the temporal scales of biodiversity and ecosystem services. Therefore, the theoretical research results and practical experience of ecological connectivity should be fully applied to marine ecosystems, and the restoration of degraded ecosystems should be encouraged and supported in ways that promote natural recovery.

Substrate binding proteins (SBP) bind to specific ligands in the periplasmic region and bind to membrane proteins to participate in transport or signal transduction. Typical SBPs consist of two α/β domains and recognize the substrate by hinge motion between two domains. Conversely, short length Rhodothermus marinus SBP (named as RmSBP) exists around the methyl-accepting chemotaxis protein. We previously determined the crystal structure of RmSBP consisting of a single α/β domain, but the substrate recognition mechanism is still unclear. To better understand the short length RmSBP, we performed comparative structure analysis, computational substrate docking, and X-ray crystallographic study. RmSBP shares a high level of similarity in α/β domain with other SBP proteins, but it has a distinct topology in the C-term region. The substrate binding model suggested that conformational change in the peripheral region of RmSBP was required to recognize the substrate. We determined the crystal structures of RmSBP at pH 5.5, 6.0, and 7.5. RmSBP showed structural flexibility of the β1-α2 loop, β5-β6 loop, and extended C-term domain based on the electron density map and temperature B-factor analysis. These results provide information that will further the understanding of the function of the short length SBP.

This chapter is written for the welfare of the society, questioning and enlightening the effects of the increment or decrement in the percentage of quality of air causing pollution due to the rise in the traffic post-lockdown due to COVID-19 in metro cities, specifically in Delhi. In this chapter, we address the question about people's preference in moving in the shared taxis to their workplaces or their reluctance and denial of the idea of moving in the shared vehicle because of the fear of getting infected. The sensitivity of the situation will compel the people to move in a single occupied vehicle (SOV). The rise in the number of vehicles on the roads will result in traffic jams and different kinds of pollution where people battling with the pandemic will inevitably get exposed to other health-related issues. We use a BPR (Bureau of Public Roads) model to combat this issue endangering the environment and public health. We exploit the BPR function to relate average travel time to the estimated number of commuters travelling by car. We collect mode share data from the NITI Ayog, the State Resource Centre and other authentic sources, which gives unique figures of the impact of shared mobility in India and how, in its absence, various sectors will get affected. Using the given data and the BPR, we evaluate increased vehicle volumes on the road if different portions of transit and carpool users switch to single-occupancy vehicles and its effect on multiple other factors. Based on the study of densely populated city, Delhi, we predict that cities with significant transit ridership are at risk for extreme traffic and pollution unless transit systems can resume safe with effective protocols.

Phospholipase Dα1 (PLDα1) belongs to phospholipases, a large phospholipid hydrolyzing protein family. PLDα1 has a substrate preference for phosphatidylcholine leading to enzymatic production of phosphatidic acid, a lipid second messenger with multiple cellular functions. PLDα1 itself is implicated in biotic and abiotic stress responses. We present here a shot-gun differential proteomic analysis on roots of two pldα1 mutants compared to the Col-0 wild type. Our data suggest new roles of PLDα1 in endomembrane transport, mitochondrial protein import and protein quality control and glucosinolate biosynthesis. Thus, we identified proteins involved in endocytosis, endoplasmic reticulum-Golgi transport and attachment sites of endoplasmic reticulum and plasma membrane (V-type proton ATPases, protein transport protein SEC13 homolog A, vesicle-associated protein 1-2, vacuolar protein sorting-associated protein 29, syntaxin-32, all upregulated in the mutants), mitochondrial import and electron transport chain (mitochondrial import inner membrane translocase subunits TIM23-2 and TIM13, mitochondrial NADH dehydrogenases, ATP synthases, cytochrome c oxidase subunit 6b-1, ADP,ATP carrier protein 2, downregulated in the mutants) and glucosinolate biosynthesis (3-isopropylmalate dehydrogenases 1, 2 and 3, methylthioalkylmalate synthase 1, cytochrome P450 83B1, Glutathione S-transferase F9, indole glucosinolate O-methyltransferase 1, adenylyl-sulfate kinase 1, all upregulated in mutants). Our results suggest broader biological roles of PLDα1 as anticipated so far.

The electronic transport stability in nanodevices composed by metal/trans-polyacetylene /metal with different long length has contributed greatly for performance, homogeneity, stability, organization of the chains, reproducibility and higher conductivity. In this paper, we present an analytical study of the electronic transport characteristics from dimerized trans-polyacetylene (trans-PA) molecules containing an odd-even number of sites coupled to metal leads (left and right) in T-shaped geometry using the extended Su-Schrieffer-Heeger (SSH) model based on tight-binding Hamiltonian with the Non-Equilibrium Green´s Function (NEGF) via Heisenberg´s equation of motion and the Keldysh´s formalism. Due to the complexity of the T-shaped odd-even chain, our proposal was to test the effects on the finite-length network for three, four, five sites and furthermore foresee for 17-sites. We show how to tune dimerization strength () coupling to the parameters and T-shaped geometry of the device to which it affects the overlap integral localized at the three endpoints of the T-shaped system, making both the odd and even chains to undergo a metal-insulator transition in their electronic behavior. The results reached through control parity of the chain plane of the parameters governing () the electronic and experimental tunneling allow a better understanding of the subject.

Serum transferrin (sTf) plays a pivotal role in regulating iron biodistribution and homeostasis within the body. The molecular details of sTf Fe(III) binding, blood transport, and cellular delivery through transferrin receptor-mediated endocytosis are generally well-understood. Emerging interest exists in exploring sTf complexation of nonferric metals as it facilitates the therapeutic potential and toxicity of several of them. This review explores recent X-ray structural and physiologically relevant metal speciation studies to understand how sTf partakes in the bioactivity of key non-redox active hard Lewis acidic metals. It challenges preconceived notions of sTf structure function correlations that were based exclusively on the Fe(III) model by revealing distinct coordination modalities that nonferric metal ions can adopt and different modes of binding to metal-free and Fe(III)-bound sTf that can directly influence how they enter into cells and, ultimately, how they may impact human health. This knowledge informs on biomedical strategies to engineer sTf as a delivery vehicle for metal-based diagnostic and therapeutic agents in the cancer field. It is the intention of this work to open new avenues for characterizing the functionality and medical utility of nonferric-bound sTf and to expand the significance of this protein in the context of bioinorganic chemistry.

The option of decarbonizing urban freight transport using Battery Electric Vehicle (BEV) seems promising.However, there is currently a strong debate whether Fuel Cell Electric Vehicle (FCEV) might be the bettersolution. The question arises as to how a fleet of FCEV influences the operating cost, the Greenhouse Gas(GHG) emissions and primary energy demand in comparison to BEVs and to Internal Combustion EngineVehicle (ICEV). To investigate this, we simulate the urban food retailing as a representative share of urbanfreight transport using a multi-agent transport simulation software. Synthetic routes as well as fleet size andcomposition are determined by solving a Vehicle Routing Problem (VRP). We compute the operating costsusing a total cost of ownership (Total Cost of Ownership (TCO)) analysis and the use phase emissions as wellas primary energy demand using the Well To Wheel (WTW) approach. While a change to BEV results in 17 -23% higher costs compared to ICEV, using FCEVs leads to 22 - 57% higher costs. Assuming today’s electricitymix, we show a GHG emission reduction of 25% compared to the ICEV base case when using BEV. Currenthydrogen production leads to a GHG reduction of 33% when using FCEV which however cannot be scaled tolarger fleets. Using current electricity in electrolysis will increase GHG emission by 60% compared to the basecase. Assuming 100% renewable electricity for charging and hydrogen production, the reduction from FCEVsrises to 73% and from BEV to 92%. The primary energy requirement for BEV is in all cases lower and forhigher compared to the base case. We conclude that while FCEV have a slightly higher GHG savings potentialwith current hydrogen, BEV are the favored technology for urban freight transport from an economic andecological point of view, considering the increasing shares of renewable energies in the grid mix.

This paper argues that, in 2020, the beneficial atmospheric effect from the reduction in aviation may have been at least 7-8 times greater than that occurring from the reduction in fossil carbon dioxide emissions from all sectors. Specifically, compared to potential atmospheric effects in 2020 without the pandemic, the decrease in effective radiative forcing from reduced contrail-cirrus formation may have been in the order of 35mWm^-2 in 2020, compared to a reduction of only 4-5mWm^-2 from the drop in fossil CO₂ emissions. Over time, pursuing a low carbon pathway generates benefits that mount up to be much more significant than 2020 effects might imply, and is essential to stabilise the climate. However, a twin-track policy focus may be needed, with more emphasis on reducing short-term climate forcing, to minimise the impacts of climate change now, and to avoid detrimental feedback events. Future policy decisions about aviation should be made in this context.

We propose a geographical time-space model extending time-space relief cartography introduced by Mathis and L’Hostis [,,,]. The novelty of the model resides in the use of cones to describe the terrestrial surface instead of graph faces, and in the use of curves instead of broken segments for edges. The approach lies a the intersection of two domains involving graphic representation: cartography, and three dimensional computer graphics. We implement the model on the Chinese space. The Chinese geographical time-space of the reference year 2006 is produced by the combination and the confrontation of the fast air transport system and of the 7.5 times slower road transport system. Slower, short range flights are represented as curved lines above the earth surface with longer length than the geodesic, in order to account for a slower speed. The very steep slope of cones expresses the relative difficulty of crossing terrestrial time-space, as well as the comparably extreme efficiency of long-range flights for moving between cities. Finally, the whole image proposes a coherent representation of the geographical time-space where fast city to city transport is combined with slow terrestrial systems that allow to reach any location.

Sporadic colorectal cancer (CRC) develops through distinct molecular events. Loss of 18q chromosome is a conspicuous event in the progression of adenoma to carcinoma. There is limited information regarding the molecular effectors of this event. Earlier, we had reported ATP8B1 as a novel gene associated with CRC. ATP8B1 belongs to the family of P-type ATPases (P4 ATPase) that primarily function to facilitate the translocation of phospholipids. In this study, we attempt to implicate ATP8B1 gene located on chromosome 18q as a tumor suppressor gene. We studied indigenous patient data and confirmed the reduced expression of ATP8B1 in tumor samples. CRC cell lines were engineered with reduced and enhanced levels of ATP8B1 which provided a tool to study its role on cancer progression. Forced reduction of ATP8B1 expression either by CRISPR/Cas9 or shRNA was associated with increased growth and proliferation of CRC cell line - HT29. In contrast, overexpression of ATP8B1 resulted in reduced growth and proliferation of SW480 cell line. We generated a network of genes that are downstream of ATP8B1. Further, we provide predicted effect of modulation of ATP8B1 levels on this network and possible effect on fatty acid metabolism related genes. These results provide evidence in support of ATP8B1 being a tumor suppressor that may affect fatty acid metabolism in CRC.

Electric moped scooter sharing services have recently experienced strong growth rates, particularly in Europe. Due to their compactness, environmental-friendliness and convenience, shared e-mopeds are suitable modes of transport in urban mobility to help reduce the environmental impact. However, its traffic-related, economic and environmental effects are merely represented in academic research. We used passenger car traffic data in Berlin generated by the multi-agent transport simulation framework MATSim to develop a python-based simulation, resembling an e-moped sharing system. Based on the results, a total cost of ownership and a life cycle assessment for fleet sizes of 2,500, 10,000 and 50,000 vehicles were conducted. The results indicate that a substantial part of all passenger car trips in Berlin can be substituted. The larger the fleet, the more and longer trips are replaced. Simultaneously, the efficiency in terms of fleet utilization decreases. The scenario with 10,000 e-mopeds offers the lowest total distance-based costs for sharing operators, whereas a fleet consisting of 2,500 vehicles exhibits the lowest environmental emissions per kilometer driven over the expected lifespan of a shared e-moped. Based on the renewable energy potential for 2050 forecasted by the German Federal Environment Agency, a significant overall decline in environmental impacts can be achieved.

PM2.5 and PM>2.5 were separately collected in Kanazawa, Japan in every season from the spring of 2017 to the winter of 2018, and nine polycyclic aromatic hydrocarbons (PAHs) and six nitropolycyclic aromatic hydrocarbons (NPAHs) were determined by HPLC with fluorescence and chemiluminescence detections, respectively. Atmospheric concentrations of both PAHs and NPAHs showed seasonal changes (highest in the winter and lowest in the summer), which were different from the variations of TSP and PM2.5 (highest in the spring). Contributions of major sources to combustion-derived particulate (Pc) in PM2.5 were calculated by the NP-method using pyrene and 1-nitropyrene as representative markers of PAHs and NPAHs, respectively. The annual average concentration of Pc accounted for only 2.1% of PM2.5, but showed the same seasonal variation as PAHs. The sources of Pc were automobiles (31%) and coal heating facilities/industries (69%). The source of Pyr was almost entirely coal heating facilities/industries (98%). A backward trajectory analysis showed that automobile-derived Pc was mainly from Kanazawa and its surroundings and that coal heating facilities-derived Pc was transported from city areas in central and northern China in the winter and during the Asian dust event in the spring. These results show that large amounts of PAHs were long-range transported from China in the winter. Even in spring when the coal heating season was over in China, PAHs came over to Japan after Asian dust storms passed through Chinese city areas. The main contributor of NPAHs was automobiles in Kanazawa and its surroundings. The recent Pc concentrations were much lower than those in 1999. This decrease was mostly attributed to the decrease in the contribution of automobiles. Thus, changes of atmospheric concentrations of Pc, PAHs and NPAHs in Kanazawa were strongly affected not only by the local emissions but also long-range transport from China.

Mitochondria are essential to cell homeostasis, and alterations in mitochondrial distribution, segregation or turnover have been linked to complex pathologies such as neurodegenerative diseases or cancer. Understanding how these functions are coordinated in specific cell types is a major challenge to discover how mitochondria globally shape cell functionality. In this review, we will first describe how mitochondrial transport and dynamics are regulated throughout the cell cycle in yeast and in mammals. Second, we will explore the functional consequences of mitochondrial transport and partitioning on cell proliferation, fate acquisition, stemness, and on the way cells adapt their metabolism. Last, we will focus on how mitochondrial clearance programs represent a further layer of complexity for cell differentiation, or in the maintenance of stemness. Defining how mitochondrial transport, dynamics and clearance are mutually orchestrated in specific cell types may help our understanding of how cells can transition from a physiological to a pathological state.

A major parameter controlling the extent and rate of oral drug absorption is permeability through the lipid bilayer of intestinal epithelial cells. Here, a biomimetic artificial membrane permeability assay (Franz-Bampa) was validated using Franz cells apparatus. Both high and low permeability drugs (metoprolol and mannitol, respectively) were used as external standards. Biomimetic properties of Franz-Bampa were also characterized by electron paramagnetic resonance spectroscopy (EPR). Moreover, the permeation profile for the 14 BCS class I-IV drugs cited in the FDA guidance (including other drugs as acyclovir, cimetidine, diclofenac, ibuprofen, piroxicam, and trimethoprim) were measured across Franz-Bampa. Apparent permeability (Papp) was compared to literature fraction dose absorbed in humans (Fa%). Papp in Caco-2 cells and Corti artificial membrane were likewise compared to Fa% to assess Franz-Bampa performance. Mannitol and metoprolol Papp values across Franz-Bampa were lower (3.20 x 10-7 and 1.61 x 10-5 cm/s, respectively) than those obtained across non-impregnated membrane (2.27 x 10-5 and 2.55 x 10-5 cm/s, respectively), confirming lipidic barrier resistivity. Performance of the Franz cell permeation apparatus using an artificial membrane showed similar log linear correlation (R2 = 0.664) with Fa%, as seen for Papp in Caco-2 cells (R2 = 0.805). Data support the validation of the Franz-Bampa method for use during drug discovery process.

The diffusion process of water molecules within a polyetherimide (PEI) glassy matrix has been analyzed by combining the experimental analysis of water sorption kinetics performed by FTIR spectroscopy with theoretical information gathered from Molecular Dynamics simulations and with the expression of water chemical potential provided by a non-equilibrium lattice fluid model able to describe the thermodynamics of glassy polymers. This approach allowed to construct a convincing description of the diffusion mechanism of water in PEI providing molecular details of the process related to the effects of the cross- and self-hydrogen bondings established in the system on the dynamics of water mass transport.

High porosity and mass transport properties of microfiltration polymeric membranes benefits nutrients supply to cells when used as scaffolds in interstitial perfusion bioreactors for tissue engineering. High nutrients transport is assumed when pore size and porosity of the membrane are in the micrometric range. The present work demonstrates that the study of membrane fouling by proteins present in the culture medium, though not done usually, should be included in the routine testing of new polymer membranes for this intended application. Two poly(ε-caprolactone) microfiltration membranes presenting similar average pore size (~0.7µm) and porosity (>80%) but different external surface porosity and pore size have been selected as case study. The present work demonstrates that a membrane with lower surface pore abundance and smaller external pore size (~0.67 µm), combined with adequate hydrodynamics and tangential flow filtration mode is usually more convenient to guarantee high flux of nutrients. On the contrary, having large external pore size (~1.70µm) and surface porosity would incur in important internal protein fouling that could not been prevented with the operation mode and hydrodynamics of the perfusion system. Additionally, the use of glycerol in the drying protocols of the membranes might cause plasticization and a consequent reduction of mass transport properties due to membrane compaction by the pressure exerted to force perfusion. Therefore, preferentially, drying protocols that omit the use of plasticizing agents are recommended.

The present article proposes a complete framework for Supply Chain Strategy (SCS) analysis that is adapted to the specific characteristics of the agrifood chain, thereby facilitating management of the former. As a specific case of analysis, the horticultural supply chain, originating in Spain and ending with the European consumer, is analyzed, taking as a reference the marketing companies at origin (mainly social economy companies, i.e.; cooperatives). In addition, a survey of marketing companies is conducted to possibly determine which explicit cooperative growth strategies may include horizontal and vertical collaboration relationships with other members of the chain. The aim is to analyze with whom the cooperative collaborates within the supply chain and the key points of such collaboration. A model analyzing the influence of collaboration on company performance is also considered. The results reveal that, in recent years, aspects related to quality and health have been surpassed and replaced by the concept of sustainability within a framework of collaboration with customers. In any case, it becomes evident that there is a need to expand collaboration within the chain by incorporating the supplier of the supplier, with the aim of making the chain more profitable.

Abstract The construction of a heterostructured nanowire array allows the manipulation of the interfacial, surface, charge transport, and transfer properties simultaneously, offering new opportunities to achieve multi-functionality for various applications. Herein, we developed a facile thermal evaporation and post-annealing method to synthesize ternary-Zn2SnO4/binary-ZnO radially heterostructured nanowire arrays (HNA). Vertically aligned ZnO nanowire arrays (3.5 μm in length) were grown on a ZnO-nanoparticle-seeded fluorine-doped tin oxide substrate by a hydrothermal method. Subsequently, the amorphous layer consisting of Zn-Sn-O complex was uniformly deposited on the surface of the ZnO nanowires via the thermal evaporation of the Zn and Sn powder mixture in vacuum, followed by post-annealing at 550 °C in air to oxidize and crystallize the Zn2SnO4 shell layer. The use of a powder mixture composed of elemental Zn and Sn (rather than oxides and carbon mixture) as an evaporation source ensures high vapor pressure at a low temperature (e.g., 700 °C) during thermal evaporation. The morphology, microstructure, and charge-transport properties of the Zn2SnO4/ZnO HNA were investigated by scanning electron microscopy, X-ray diffraction, Raman spectroscopy, transmission electron microscopy, and electrochemical impedance spectroscopy. Notably, the optimally synthesized Zn2SnO4/ZnO HNA shows an intimate interface, high surface roughness, and superior charge-separation and -transport properties compared with the pristine ZnO nanowire array.

Based on rapeseed plantation biodiesel production system requires transportation of goods, like raw materials, machines and tools, and products between various conversion stages of agricultural as well as industrial subsystems. Each transportation step requires consumption of some energy. This consumption, decreases the net amount of energy delivered out of the biofuel production system, and consequently decreases energetic efficiency of the system. The present work deals with computer modelling of the influence of energy consumed on those transport routes on the energetic efficiency of production system. The effects caused by variation of several parameters like fuel consumption and load capacity of transportation means, size of plantation, distribution and sizes of individual fields, distances between fields, as well as plantation yield, and finally the distance between plantation and the industrial facility are studied using the numerical model developed

Numerical modeling of sedimentation and erosion in reservoirs is an active field of reservoir research. However, simulation of bed-load transport phenomena has rarely been applied to other water bodies, in particular, the fluctuating backwater area. This is because the complex morphological processes between hydrodynamics and sediment transport are generally challenging to accurately predict. In this study, the refinement and application of a two-dimensional shallow-water and bed-load transport model to the fluctuating backwater area is described. The model employs the finite volume method of the Godunov scheme and saturated sediment transport equations. The model was verified against experimental data of a scaled physical model. It was then applied to actual reservoir operation, including reservoir storage, reservoir drawdown and continuous flood process, to predict the morphology of reservoir sedimentation and sediment transport rates and bed level changes in the fluctuating backwater area. It was found that the location and morphology of sedimentation effected by the downstream water level results in random evolution of the river bed, and bed-load sedimentation is transported from upstream to downstream with the slope of the longitudinal section of the river bed generally reduced. Moreover, the sediment is mainly deposited in the main channel and the elevation difference between the riverbank and channel decreases gradually.

We report the experiences of the bike sharing system in Ningbo, China. To analyze the impact of the system, system log data are collected for the whole month of May 2014 (with more than 1.7 million usage records), supplemented by questionnaire data from 1,856 respondents. Our results show that public bike usage follows the same pattern as road traffic, with morning and evening peaks on week days. In terms of mode substitution, 16% of public bike trips would have been made by private cars. In average, each public bike is used 3.7 times per day, with each trip lasting around 23 minutes and covering around 3.5 kilometre. This translates into a reduction of car travel by more than 11 million kilometre per year, a significant contribution to the sustainability of urban transport in Ningbo.

Nowadays, wearable devices for human health monitoring are increasingly become popular and widely used. Typically, the wearable device is small size and operates with batteries. Therefore, the wearable device acquires bio-signals and transfers to smartphones or personal computers (PC) via WiFi/ Bluetooth for processing data. To reduce power consumption is one of the most important challenges of designing wearable devices. To solve this problem, the proposed signal quality valuation (SQV) method can be select the high-quality signal and reduce the transfer time to other devices. In this paper, the proposed SQV and data compression method rely on real-time PPG signals analysis to retain important information of PPG signal, improve performance and power consumption of PPG devices. Besides, we also proposed Heuristic rules for heart rate (HR) estimation with compression data. The experimental results show that the highest compression ratio (CR) is 387.8 with BIDMC Physionet database (sampling frequencies of 125 Hz) and HR error as 1.43 bpm for averaging absolute error (avAE), the standard deviation absolute error (sdAE as 0.4) and relative error mean (avRE as 0.019). The proposed real-time PPG measurement system (sampling frequency as 100/ 200/ 400 Hz) reduce power consumption and open the new structure for healthcare application systems

The article discusses the issues related to the safety of transport of dangerous goods by road. Research on accidents in transport unambiguously points to the human factor, which is most responsible for causing the accident. Determining the causes of driver unreliability in the hu-man-vehicle-environment system requires thorough research. Unfortunately, in this case, experimental research with human involvement is limited in scope. This leaves modeling and simulation of the behavior of the human factor, i.e., the driver transporting dangerous goods. The human being, due to its complexity, is a challenging element to parameterize. The literature presents various attempts to model human actions. In their work, the authors used heuristic methods, specifically fuzzy set techniques, to build a human factor model. In these models, human actions were specified using a verbal or linguistic description. The specificity of fuzzy sets allows to "naturally" limit the "precision" in describing human behavior. The model was built based on the author's questionnaire and expert research, based on which individual features were selected. Then, the traits were assigned appropriate states. The output parameter of the model is λL - the intensity of human error. The obtained values of the intensity of the accident caused by the driver's error were implemented into the author's method of risk assessment. They constituted one of the factors determining the probability of an accident in the transport of dangerous goods, which allowed to determine the optimal route of transport of these goods characterized by the lowest risk of an undesirable event on the route. The article presents the model's assumptions, structure, and features included in the model, which have the most significant influence on shaping the intensity of human error. The results of the simulation studies showed a diversified effect of the analyzed characteristics on the driver's efficiency.

A new picture of the Josephson effect is devised. The radio-frequency (RF) signal, observed in a Josephson junction, is shown to stem from bound electrons, tunneling periodically through the insulating film. This holds also for the microwave mediated tunneling. The Josephson effect is found to be conditioned by the same prerequisite worked out previously for persistent currents, thermal equilibrium and occurence of superconductivity. The observed negative resistance behaviour is shown to originate from the interplay between the normal and superconducting currents.

This paper presents a new methodology to derive and analyze strategies for a fully decarbonized urban transport system which combines conceptual vehicle design, a large-scale agent-based transport simulation, operational cost analysis, and life cycle assessment for a complete urban region. The holistic approach evaluates technical feasibility, system cost, energy demand, transportation time and sustainability-related impacts of various decarbonization strategies. In contrast to previous work, the consequences of a transformation to fully decarbonized transport system scenarios are quantified across all traffic segments, considering procurement, operation and disposal. The methodology can be applied to arbitrary regions and transport systems. Here, the metropolitan region of Berlin is chosen as a demonstration case. First results are shown for a complete conversion of all traffic segments from conventional propulsion technology to battery electric vehicles. The transition of private individual traffic is analyzed regarding technical feasibility, energy demand and environmental impact. Commercial goods, municipal traffic and public transport are analyzed with respect to system cost and environmental impacts. We can show a feasible transition path for all cases with substantially lower greenhouse gas emissions. Based on current technologies and today’s cost structures our simulation shows a moderate increase in total systems cost of 13-18%.

Different contact materials along with optimization of the deposition techniques expand the possibilities to obtain high performance room temperature CdTe-based X/γ-ray detectors. The heterostructures with ohmic (MoOx) and Schottky (MoOx, TiOx, TiN, and In) contacts, created by DC reactive magnetron sputtering and vacuum thermal evaporation, as well as In/CdTe/Au diodes with a p-n junction, formed by laser-induced doping, were developed and investigated. Depending on the pre-treatment of the surface of semi-insulating p-CdTe crystals, deposition of a MoOx film formed an ohmic or Schottky contact. Based on the calculations and IV characteristics of the fabricated Mo-MoOx/р-CdTe/MoOx-Mo, In/CdTe/MoOx-Mo, Ti-TiOx/р-CdTe/MoOx-Mo, and Ti-TiN/р-CdTe/MoOx-Mo Schottky-diode detectors, the current transport processes were described in the models of the carrier generation-recombination within the space-charge region (SCR) at low bias voltages, and space-charge limited current at higher voltages, respectively. The energies of generation–recombination centers, density of trapping centers, and carrier lifetimes were determined. A sharp increase in the reverse current in the Mo-MoOx/р-CdTe/MoOx-Mo, Ti-TiOx/р-CdTe/MoOx-Mo, and Ti-TiN/р-CdTe/MoOx-Mo heterostructures at high bias was discussed in frames of the Poole–Frenkel emission model. Nanosecond laser irradiation of the In electrode, pre-deposited on the p-CdTe crystals, resulted in an increase in the voltage range, corresponding to the carrier generation-recombination in the SCR, in the IV characteristics of the In/CdTe/Au diodes. Such In/CdTe/Au p-n junction diodes demonstrated high energy resolutions (7%@59.5 keV, 4%@122 keV, and 1.6%@662 keV).

We report morpho-structural properties and charge conduction mechanisms of a foamy “graphene sponge”, having a density as low as ≈ 0.07 kg/m3 and a carbon to oxygen ratio C:O ≃ 13:1. The spongy texture analysed by scanning electron microscopy is made of irregularly-shaped millimetres-sized small flakes, containing small crystallites with a typical size of ≃ 16.3 nm. A defect density as high as ≃ 2.6×1011 cm−2 has been estimated by the Raman intensity of D and G peaks, dominating the spectrum from room temperature down to ≃ 153 K. Despite the high C:O ratio, the graphene sponge exhibits an insulating electrical behavior, with a raise of the resistance value at ≃ 6 K up to 5 orders of magnitude with respect to the room temperature value. A variable range hopping (VRH) conduction, with a strong 2D character, dominates the charge carriers transport, from 300 K down to 20 K. At T&lt; 20 K, graphene sponge resistance tends to saturate, suggesting a temperature-independent quantum tunnelling. The 2D-VRH conduction originates from structural disorder and is consistent with hopping of charge carriers between sp2 defects in the plane, where sp3 clusters related to oxygen functional groups act as potential barriers.

Logistics in urban areas are currently suffering a radical transformation due to increasingly population concentration and the massive use of cars as the preferred transport mode. These issues have resulted in higher pollution levels in urban environments and traffic congestion impacting the world globally. Facilitating the use of sustainable transport modes is widely regarded as a necessity to cope with these adverse effects on citizens’ life quality. Hence, some regions, as the European Union, are encouraging bus transport firms to make their business models more environmentally and socially sustainable. The aim of this research is thus to explore how practices adopted by urban bus companies can improve cities’ sustainability. With this in mind, a combined Importance Performance Analysis (IPA)-Analytic Hierarchy Process (AHP) method was applied. In this way, both environmental and social sustainability effects of developed practices were represented through hierarchical structures separately. Subsequently, importance and performance ratings of practices in each sustainability dimension were estimated, and thus two IPA grids were generated. These grids support managers in the establishment of more effective action plans to improve logistics sustainability in cities. Findings also provide guidance to governments on the practices that should be promoted in future urban mobility plans.

As 180-degree meanders are observed in abundance in nature, a meandering channel with two consecutive 180-degree bends was designed and constructed to investigate bed topography variations. These two 180-degree mild bends are located between two upstream and downstream straight paths. In this study, different mean velocity to critical velocity ratios have been tested at the upstream straight path to determine the meander's incipient motion. To this end, bed topography variations along the meander and the downstream straight path were addressed for different mean velocity to critical velocity ratios. In addition, the upstream bend's effect on the downstream bend has been investigated. Results indicated that the maximum scour depth at the downstream bend has increased as a result of changing the mean velocity to critical velocity ratio from 0.8 to 0.84, 0.86, 0.89, 0.92, 0.95, and 0.98 by respectively 1.5, 2.5, 5, 10, 12, and 26 times. Moreover, increasing the ratio increased the maximum sedimentary height by 3, 10, 23, 48, 49, and 56 times. The upstream bend's incipient motion was observed for the mean velocity to critical velocity ratio of 0.89, while the downstream bend was equal to 0.78.

The purpose of the work is an underwater positioning safety study that used the GNSS-like underwater navigation systems. In the process of research, we used the methods of software modeling of underwater spoofing processes. The spoofing problem consists of three stages: design of spoofers, design of spoofing detection systems, and design of anti-spoofing systems. This article discusses some methods of spoofing detection. We briefly describe the known methods of underwater positioning systems. Unlike GNSS, currently only LNSS (Local Navigation Satellite System) can be considered in this case. Spoofing detection systems with one hydrophone are of great practical importance, as they allow for use of standard hydroacoustic equipment. However, detection of spoofing is not possible in static mode, which is with underwater vehicle at rest. In case of two hydrophones the detection of spoofing in static mode is possible. We discuss the navigation based on the use of an acoustically passive receiver. The receiver “listens” to the buoys and solves the problem of finding its own position using the coordinates of the buoys (such systems are called GNSS-like Underwater Positioning Systems or GNSS-like UPS). Depending on the scale of system service area, GNSS-like UPS-es are divided into global, regional, zonal and local systems. In this article, we take into account only the local class of GNSS-like UPS. The acoustic signal generator transmits a simulation of several buoy signals. If the level of the simulated signal exceeds the signal strength of actual buoys, the UPS receiver will “lock onto” the fake signal and then calculate a false position basing on it. The development of further research should be focused on the creation of hardware and software systems for conducting physical experiments at depths up to 400 m.

Despite several decades of research, the physics underlying translation – protein synthesis at the ribosome – remains poorly studied. For instance, the mechanism coordinating various events occurring in distant parts of the ribosome is unknown. Very recently, we have suggested that this allosteric mechanism could be based on the transport of electric charges (electron holes) along RNA molecules and localization of these charges in the functionally important areas; this assumption was justified using tRNA as an example. In this study, we turn to the ribosome and show computationally that holes can also efficiently migrate within the whole ribosomal small subunit (SSU). The potential sites of charge localization in SSU are revealed, and it is shown that most of them are located in the functionally important areas of the ribosome – intersubunit bridges, Fe4S4 cluster and the pivot linking the SSU head to the body. As a result, we suppose that hole localization within the SSU can affect intersubunit rotation (ratcheting) and SSU head swiveling, in agreement with the scenario of electronic coordination of ribosome operation. We anticipate that our findings will improve the understanding of the translation process and advance the molecular biology and medicine.