The acoustic conditions of open-plan office spaces influence wellbeing and productivity perceived by users, but with an inadequate evaluation for workspace, acoustic design in open-plan offices can be a factor that alters user performance. Such is the case in Mexico, where there are no adequate standards to evaluate specific acoustic conditions such as intelligibility. For this reason, this case study aims to evaluate different types of measurement methods for intelligibility. This study was carried out in a university in northern Mexico. The sound measurements were based on the Mexican standard for noise analysis and the ISO 3382- part 3 standards for acoustic measurements for open-plan offices. The psychoacoustic parameters evaluated were Reverberation and Intelligibility, using objective methods determined on S/N and subjective methods based on loss of consonant; where it was analyzed distance between sound source and zones classified by building design characteristics. The results indicated in which points the intelligibility effects increased, observing that Reverberation remained stable in this office, and that the subjective methods presented greater size of the measured sound effect than the objective methods. This finding establishes that subjective methods conformed to Lognormal behavior, which is applicable to other linguistic elements describing speech behavior.

Over the last twenty years, library publishing has emerged in higher education as a new class of publisher. Conceived as a response to commercial publishing practices that have strained library budgets and prevented scholars from openly licensing and sharing their works, library publishing is both a local service program and a broader movement to disrupt the current scholarly publishing arena. It is growing both in numbers of publishers and numbers of works produced. The commercial publishing framework which determines the viability of monetizing a product is not necessarily applicable for library publishers who exist as a common good to address the needs of their academic communities. Like any business venture, however, library publishers must develop a clear service model and business plan in order to create shared expectations for funding streams, quality markers, as well as technical and staff capacity. As the field is maturing from experimental projects to full programs, library publishers are formalizing their offerings and limitations. The anatomy of a library publishing business plan is presented and includes the principles of the program, scope of services, and staffing and governance requirements. Other aspects include production policies, financial structures, and measures of success.

Local thermal comfort (TC) and draught rate (DR) has been studied widely. There has been more meaningful research performed in controlled boundary condition situations than in actual work environments involving occupants. TC conditions in office buildings in Estonia have been barely investigated in the past. In this paper, the results of TC and DR assessment in five office buildings in Tallinn are presented and discussed. Studied office landscapes vary in heating, ventilation and cooling (HVAC) system parameters, room units and elements. All sample buildings were less than six years old, equipped with dedicated outdoor air ventilation system and room conditioning units. The on-site measurements consisted of TC and DR assessment with indoor climate questionnaire (ICQ). The purpose of the survey is to assess the correspondence between HVAC design and the actual situation. Results show, whether and in what extent the standard-based criteria for TC is suitable for actual usage of the occupants. Preferring one room conditioning unit type or system may not guarantee better thermal environment without draught. Although some HVAC systems observed in this study should create the prerequisites for ensuring more comfort, results show that this is not the case for all buildings in this study.

Much of the debate on Plan S seems to concentrate on how to make toll access journals open access, taking for granted that existing open access journals are Plan S compliant. We suspected this was not so, and set out to explore this using DOAJ's journal metadata. We conclude that an overwhelmingly large majority of open access journals are not Plan S compliant, and that it is small HSS publishers not charging APCs that are least compliant and will face major challenges with becoming compliant. Plan S need to give special considerations to smaller publishers and/or non-APC-based journals.

German noise action plans aim to reduce negative health outcomes from noise exposure and identify quiet areas free of noise pollution. Quiet area identification in German noise action plans is based primarily on noise mapping and spatial analysis and not empirical or qualitative data about acoustic environments, thus leaving a gap in the understanding of the quality of formally recognized quiet areas in noise action plans. This work presents a comparative empirical case study in Dortmund, Germany, with the aim to describe the diurnal dB(A) and biophonic properties of quiet areas versus noise 'hot spots'. Sound observations were collected (n=282,764) in five different natural or recreational land use patch types larger than four acres within 33 proposed quiet areas in Dortmund (n=70) and 23 noise hot spots between April 27^th, 2022 and March 2^nd, 2023. We find that quiet areas are on average more than 20 dB(A) quieter than noise hot spots almost every hour of the day. Forests, managed tree stands, cemeteries, and agriculture diel patterns are dominated by dawn dusk chorus in spring and summer, whereas sport and recreation as well as noise hot spots are dominated by traffic and human noise. A novel composite biophony mapping procedure is presented that finds distinct temporal distribution of biophony in forested and agriculture peri-urban locations positively associated with patch size, distance away from LDEN > 55, proximity to water, and the number of vegetation layers in the plant community. Anthrophony distribution dominates urban land uses in all hours of the day, but expands during day and evening and contracts at night and in dusk hours. The procedures presented here illustrate how qualitative information regarding quiet areas can be integrated into German noise action planning.

Open-plan office (OPO) layouts emerged to allow organizations to adapt to changing workplace demands. We explore the potential for OPOs to provide such adaptive capacity to respond to two contemporary issues for organizations: the chronic challenge of environmental sustainability, and the acute challenges emerging from the great COVID-19 homeworking experiment. We apply a socio-technical systems perspective and green ergonomics principles to investigate the relationship between an OPO environment and the occupants working within it. In doing so, we consider the relevant technical and human factors such as green technology and employee green behavior. We also consider how a green OPO might provide non-carbon benefits such as improving occupant wellbeing and supporting the emergence of a green organizational culture. Our investigation highlights several avenues through which an OPO designed with green ergonomic principles could benefit occupants, the organizations they work for, and the natural environment of which they are a part and on which they depend. We find reason to suspect that green OPOs could play an important role in sustainable development; and offer a research agenda to help determine whether in fact OPOs are another example of how going green is good business.

A common motivation for increasing open access to research findings and data is the potential to create economic benefits – but evidence is patchy and diverse. This study systematically reviewed the evidence on what kinds of economic impacts (positive and negative) open science can have, how these comes about, and how benefits could be maximized. Use of open science outputs often leaves no obvious trace, so most evidence of impacts is based on interviews, surveys, inference based on existing costs, and modelling approaches. There is indicative evidence that open access to findings/data can lead to savings in access costs, labour costs and transaction costs. There are examples of open science enabling new products, services, companies, research and collaborations. Modelling studies suggest higher returns to R&D if open access permits greater accessibility and efficiency of use of findings. Barriers include lack of skills capacity in search, interpretation and text mining, and lack of clarity around where benefits accrue. There are also contextual considerations around who benefits most from open science (e.g. sectors, small vs larger companies, types of dataset). Recommendations captured in the review include more research, monitoring and evaluation (including developing metrics), promoting benefits, capacity building and making outputs more audience-friendly.

A body plan is a stable configuration of characters for a major taxonomic group, such as chordates or arthropods. Despite widespread casual reliance on the concept for guiding comparisons within and between groups, the nature of body plans as well as the biological causes underlying their evolution have remained elusive. This paper proposes an abstract mechanistic model of body plan identity. We hypothesize that body plans are an evolutionary phenomenon that only applies to a relatively small subset of major clades, rather than being associated with each and every so-called “phylum.” Body plans arise in evolution by stepwise accretion, and require a level of developmental complexity that is only found in some animal clades. Further, we suggest that, parallel to the developmental mechanisms controlling character identity, there are “body plan identity mechanisms” (BpIMs) that maintain entire configurations of characters while possessing a mechanistic architecture that is itself stable and traceable through evolutionary change. These BpIMs, we suggest, are entrenched intercellular signaling networks operating between transient embryonic structures that are destined to differentiate into distinct individualized characters. The activity of a BpIM results in a transient long-range integration of the embryo that is highly sensitive to genetic and environmental perturbations, and that can be detected morphologically as a conserved phylotypic stage. This model is illustrated with detailed interpretations of the notochord signaling system and the segment polarity network as candidate BpIMs in vertebrates and arthropods, respectively. We conclude by contrasting the proposed developmental-mechanistic conception of body plans with the phylogenetic notion of ground plans, and sketch the general outlines of an empirical research program on body plan evolution.

The purpose of this paper is to assess the degree of openness of scientific articles on bioeconomy. Based on a WoS corpus of 2,489 articles published between 2015 and 2019, we calculated bibliometric indicators, explored the openness of each paper and assessed the share of journals, countries and research areas of these articles. The results show a sharp increase and diversification of articles in the field of bioeconomy, with a beginning long tail distribution. 45.6% of the articles are freely available, and the share of OA papers is steadily increasing, from 31% in 2015 to 52% in 2019. Gold is the most important variant of OA. Open access is low in the applied research areas of chemical, agricultural and environmental engineering but higher in the domains of energy and fuels, forestry, and green and sustainable science and technology. The UK and the Netherlands have the highest rates of OA papers, followed by Spain and Germany. The funding rate of OA papers is higher than of non-OA papers. This is the first bibliometric study on open access to articles on bioeconomy. The results can be useful for the further development of OA editorial and funding criteria in the field of bioeconomy.

The digital format opens up new possibilities for interaction with monographic publications. In particular, annotation tools make it possible to broaden the discussion on the content of a book, to suggest new ideas, to report errors or inaccuracies, and to conduct open peer reviews. However, this requires the support of the users who might not yet be familiar with the annotation of digital documents. This paper will give concrete examples and recommendations for exploiting the potential of annotation in academic research and teaching. After presenting the annotation tool of Hypothesis, the article focuses on its use in the context of HIRMEOS (High Integration of Research Monographs in the European Open Science Infrastructure), a project aimed to improve the Open Access digital monograph. The general line and the aims of a post-peer review experiment with the annotation tool, as well as its usage in didactic activities concerning monographic publications are presented and proposed as potential best practices for similar annotation activities.

During the last years, significant initiatives have been launched for the dissemination of Open Access as part of the Open Science movement. Nevertheless, the other major pillars of Open Science such as Open Research Data (ORD) and Open Peer Review (OPR) are still in an early stage of development among the communities of researchers and stakeholders. The present study sought to unveil the perceptions of a medical and health sciences community about these issues. Through the investigation of researchers’ attitude, valuable conclusions can be drawn, especially in the field of medicine and health sciences, where an explosive growth of scientific publishing exists. A quantitative survey was conducted based on a structured questionnaire, with 51.8% response rate (215 responses out of 415 electronic invitations). The participants in the survey agreed with the ORD principles However they ignored basic terms like FAIR (Findable, Accessible, Interoperable and Reusable) and appeared incentive to permit the exploitation of their data. Regarding OPR, participants expressed their agreement, implying their interest for a trustworthy evaluation system. Conclusively, researchers urge to receive proper training for both ORD principles and OPR processes which combined with a reformed evaluation system will enable them to take full advantage of the opportunities that arise from the new scholar publishing and communication landscape.

In Malaysia, as in many parts of the world, vocational education and training (VET) is frequently perceived as the solution to improving the opportunities of youths who lack the resources, skills or motivation to continue with higher education. The focus of the study falls on the effectiveness of the apprenticeship scheme during the 10^th Malaysia Plan. This study may provide an opportunity to find out how the related parties react towards the apprenticeship scheme. This is important, as feedbacks are central to the success or failure of any scheme. It is expected that the relevant government bodies, private sectors, trainers and trainees will have a valuable insight on the progress this far and what need to be done in the future based on the outcome of the research. This study follows snowballing sampling method and gathers the information from apprentices from variety of industrial sectors. The findings indicate effectiveness at some types of training but lacks comprehensiveness and efficient use of resources and future direction, especially during the 10^th Malaysia plan period from 2011 to 2016. This exploratory research is a first chapter of the deeper study in this niche.

The dynamic global automotive sector is characterized by an ever-evolving demand for high-quality vehicles and accessible prices. This research tackles the issue of scrap reduction in electric motor manufacturing for the automotive industry, specifically in a Chinese company, by employing the PDCA methodology. The paper delves into the company's background and current landscape, while pinpointing the problem: specific production lines segments experiencing hi-pot issues are the primary source of scrap. The overarching goal is to design and implement a strategy that, leveraging the PDCA approach, reduces scrap generated during the eight-months subassembly (armature) manufacturing process, from its current average of 2.92% to 0.7%, ultimately enabling the company to eliminate hi-pot defects.

Radon, a carcinogenic radioactive gas, is a leading cause of lung cancer according to the World Health Organization. European Member States are required to develop and implement National Radon Action Plans (RAPs) to address its dangerous health effects. However, assessing the effectiveness of these RAPs presents challenges for authorities. This study aims to explore the possibility for a systematic and standardised assessment method to evaluate the effectiveness of RAPs strategies and its implementation. The method involved analysing the strategies of 27 EU Member States and the UK, conducting legal document analysis and group interviews with responsible authorities. Additionally, four regional workshops and one final European workshop were held. The research took place from March 2021 to May 2023. Findings indicate that evaluating RAP effectiveness is challenging due to limited existing common criteria or indicators. To address this, the study proposes guiding questions for each element required by the EU Directive, as well as additional questions related to education and training. This contribution benefits RAP owners and European regulatory authorities, supporting the development of effectiveness indicators for RAPs. BY improving assessment methods, we can enhance the effectiveness of strategies in mitigating the risks associated with radon exposure.

This paper is introducing KABADA (Knowledge Alliance of Business Idea Assessment: Digital Approach) unique tool, together with opinions of young people about entrepreneurship, their skills and experience with this tool. The focus is on non-business students who study natural sciences, engineering and other areas at the Faculty of Forestry and Wood Technology at Mendel University in Brno, Czech Republic. KABADA tool has been developed and tested by a team of international experts. It can be used to improve forester management. This structured, Web-based, platform which is based on theoretical research, relevant statistics, and artificial intelligence insights, guides entrepreneurs through every step of the way including what challenges and opportunities lie ahead. The research included survey answers from 60 university students before and after using KABADA tool. The results show that students are interested in entrepreneurship but do not have the knowledge, experience and support from curriculum. Majority of students had no or very low experience with entrepreneurship nor any entrepreneurship training or study course before. After using the tool, students declared to have higher knowledge of entrepreneurship and the number of students who intended to become an entrepreneur increased. The tool is available on-line, free of charge.

Hotel water systems colonized with Legionella spp. have been the source of travel-associated Legionnaires’ disease and cases, clusters or outbreaks continue to be reported worldwide each year. A total of 132 hotels linked with travel-associated Legionnaires’ disease, as reported through the European Legionnaires’ Disease Surveillance Network, were inspected and tested for Legionella spp. during 2000–2019 by the public health authorities of the island of Crete (Greece). A total of 3,311 samples were collected: 1,885 (56.93%) from cold water supply systems, 1,387 (41.89%) from hot water supply systems, 37 (1.12%) were swab samples and two (0.06%) were soil. Of those, 685 (20.69%), were collected from 83 (62.89%) hotels, testing positive (≥ 50CFU/L) for Legionella pneumophila) serogroups 1-10, 12-14 and non-pneumophila species (L. anisa, L. erythra, L. tusconensis, L. taurinensis, L. birminghamensis, L. rubrilucens, L. londiniesis, L. oakridgensis, L. santicrusis, L. brunensis, L. maceacherii). The most frequently isolated L. pneumophila serogroups were 1 (27.92%) and 3 (17.08%). Significantly higher isolation rates were obtained from hot water supply systems (25.96%) versus cold water systems (16.98%) and swab samples (13.51%). A Relative Risk (R.R.) > 1 (p < 0.0001) was calculated for hot water temperature <55 °C (R.R.: 4.43), chlorine concentrations <0.2 mg/L (R.R.: 2.69), star rating <4 (R.R.: 1.73) and absence of Water Safety Plan implementation (R.R.: 1.57).

Background. Restoring large defects with proximal caries extending below the cemento-enamel junction and cavity margins located beneath the gingival tissues represents a very common clinical situation. The aim of this article is to propose a clinical classification of the localization subgingival margins of cavity.Material and methods. Diagnosis is carried out by periodontal probe perpendicular to the long axis of the tooth in the deepest point of the cavity’s margin. To describe the localization subgingival margins of cavity we use exponent which value is equal to the distance (integer number expressed in millimeters) of the level of epithelial attachment to the margin of the cavity. Three periodontal examiners, with >10 years of periodontal practice, were required to attend a calibration session aimed at the validation of the proposed classification. Results. The intrarater and interrater agreement among the localization subgingival margins of cavity: for intrarater agreement ranged from 0.74 to 0.95 (almost perfect agreement), whereas interrater agreement ranged from 0.26 to 0.59 (moderate agreement).Conclusions. The classification the localization subgingival margins of cavity is useful for reaching a more precise diagnosis.

The business planning process can be considered as a strategic phase of any business. Given that the business plan is a management accounting tool, there are countless approaches that can be adopted to prepare it since there is no legal requirement, as opposed to obligations relating to financial accounting. However, in general, every business plan consists of a numerical part (budget) and a narrative part. In this research, the author highlights, on the basis of experiences and commonly used theories, a standard process that can be adaptable to the business plan of any type of activity. The use of big data is highlighted as an essential part of feeding the data of almost all the steps of the budget. The author then manages to determine a generally applicable standard process, indicating all the data necessary to prepare an accurate and reliable business plan. A case study will provide adequate support to the demonstration of the immediate applicability of the proposed model.

A basic pattern in the body plan architecture of many animals, plants and some molecular and cellular systems is five-part units. This pattern has been understood as a result of genetic blueprints in development and as a widely conserved evolutionary character. Despite some efforts, a definitive explanation of the abundance of pentagonal symmetry at so many levels of complexity is still missing. Based on both, a computational platform and a statistical spatial organization argument, we show that five-fold morphology is substantially different from other abundant symmetries like three-fold, four-fold and six-fold symmetries in terms of spatial interacting elements. We develop a measuring system to determine levels of spatial organization in 2D polygons (homogeneous or heterogeneous partition of defined areas) based in principles of regularity in a morphospace. We found that spatial organization of five-fold symmetry is statistically higher than all other symmetries studied here (three to ten-fold symmetries) in terms of spatial homogeneity. The significance of our findings is based on the statistical constancy of geometrical constraints derived from spatial organization of shapes, beyond the material or complexity level of the many different systems where pentagonal symmetry occurs.

Real-time strategy (RTS) game has proposed many challenges for AI research for its large state spaces, enormous branch factors, limited decision time and dynamic adversarial environment. To tackle above problems, the method called Adversarial Hierarchical Task Network planning (AHTN) has been proposed and achieves favorable performance. However, the HTN description it used cannot express complex relationships among tasks and impacts of environment on tasks. Moreover, the AHTN cannot handle task failures during plan execution. In this paper, we propose a modified AHTN planning algorithm named AHTNR. The algorithm introduces three elements essential task, phase and exit condition to extend the HTN description. To deal with possible task failures, the AHTNR first uses the extended HTN description to identify failed tasks. And then a novel task repair strategy is proposed based on historical information to maintain the validity of previous plan. Finally, empirical results are presented for the μRTS game, comparing AHTNR to the state-of-the-art search algorithms for RTS games.

Nowadays the relationship between planning land use and actual land use is not so clear in general. A lot of efforts have been put in the failures of regulation for the expansion of construction land. However, it still lacks an integrated approach to study the effectiveness of land use regulation in terms of different land use types. Furthermore, the existing evaluation of land use plan mainly focuses on a general level, a detailed research on the regulation effectiveness of each construction land use type is absent. Therefore, this research tries to evaluate regulation effectiveness of land use plan, which takes Cangwu country, Guangxi Province as an example. The finding by analysis is that the total area of construction land expansion was about 3494.73 ha, nearly 1.1 times of the plan quota. Moreover, the effectiveness differs greatly in various construction land use types. Town, industrial/mining sites can be well regulated through the quota of land use plan. While, the quota regulation system is not as effective for other type of construction land. Thus, we suggest to improve the regulation effectiveness of construction land through different plan instruments.

Agricultural production needs technologies that assist the management of natural resources, for example, the collection of real-time data on soil, water, weather, crops, and biodiversity conditions. Sensor technology solutions and open-source software are appropriate for promoting more sustainable agricultural production. Among the advantages of using open-source technologies and software is its potential for extension, collaboration, customization, flexibility, maintenance cost, transparency, speed, and better security. Given the above, the objective of this research was to find, in different electronic databases, exclusively open-source software for precision agriculture, offering a systematic review, and addressing considerations and challenges. This survey considers up-to-date open-source software available in repositories such as GitHub and GitLab, to understand its characteristics and application formats.

(1) Background: The 2002 Budapest Open Access Initiative recommended on self-archiving of scientific articles in open repositories as the “green road” to open access. Twenty years later, only one part of the researchers deposits their publications in open repositories; moreover, one part of the repositories’ content is not based on self-archived deposits but on mediated nonfaculty contributions. The purpose of the paper is to provide more empirical evidence on this situation and to assess the impact on the future of the green road. (2) Methods: We analyzed the contributions on the French national HAL repository from more than 1,000 laboratories affiliated to the ten most important French research universities, with a focus on 2020, representing 14,023 contributor accounts and 166,939 deposits. (3) Results: We identified seven different types of contributor accounts, including deposits from nonfaculty staff and import flows from other platforms. Mediated nonfaculty contribution accounts for at least 48% of the deposits. We also identified difference between institutions and disciplines. (4) Conclusions: Our empirical results reveal a transformation of open repositories from self-archiving and direct scientific communication towards research information management. Repositories like HAL are somewhere in the middle of the process. The paper describes data quality as the main issue and major challenge of this transformation.

Open-source devices are nowadays used in a vast number of research fields like medicine, education, agriculture, and sports among others. In this work, an open-source, portable, low cost pH logger, appropriate for in situ meas-urements was designed and developed to assist in experiments on agricultural produce manufacturing. Τhe device was calibrated manually using pH buffers for values of 4.01 and 7.01. Then it was tested by manually measuring pH from the juice of citrus fruits. A waterproof temperature sensor was added to the device for temperature compen-sation when measuring pH. A formal method comparison process between the open-source device and a Hanna HI9024 Waterproof pH Meter was designed to assess their agreement. We derived indices of agreement and graph-ical assessment tools using mixed-effects models. Advantages and disadvantages for interpreting agreement through the proposed procedure are discussed. In our illustration, indices reported mediocre agreement and the subsequent similarity analysis revealed a fixed bias of 0.22 pH units. After recalibration, agreement between the devices im-proved to excellent levels. The process can be followed in general to avoid misleading or over-simplistic results of studies reporting solely correlation coefficients for formal comparison purposes.

Considering that traditional energy sources such as fossil fuel are about to deplete during the following decades, governments try to turn to renewable energy. It is commonly known that Greece has a natural advantage of abundant solar energy and wind power due to its geographical location and characteristics.The main focus of this study is to examine how wind energy potential across the Aegean Sea and continental Greece can provide a promising field for investments in Greece, considering the economic crisis, current trends and future perspectives.We firstly focus on current legislation framework considering that laws associated with such types of investment in Greece are very complex and rapidly changing. Furthermore, a case study for a hypothetical investment plan concerning a wind park located in an Aegean island will be presented. RetScreen which is a software made by the Canadian government, will be used as a decision support tool for analyzing the potential investment scenario and a financial report will follow with estimation of the overall cost, depreciation, upcoming benefits, and payback period of the investment.Data analysis concludes that wind parks still prove to be an economically viable investment, although incentives considering the guaranteed price per kwh and faster investment times must be provided by the government.

According to the Global Report on Internal Displacement (GRID, 2022), the number of displaced people worldwide at the end of 2021 was 59.1 million, with 53.2 million of them being the result of conflicts and violence, and 5.9 million caused by climate-related disasters. Furthermore, the In-ternational Organization for Migration (IOM) predicts that the climate crisis will be solely re-sponsible for one billion migrants by 2050. In this context, the research examines the issue of coastal multi-risk arising from a combination of heavy rainfall, river's overflow, and sea-level rise phenomena, analysing it through the disciplinary perspective of urban planning. Specifically, the study focuses on the need to upgrade the Local Urban Plan from a climate-proof perspective by defining a method aimed at updating the territory's cognitive framework through the preparation of a multi-risk map (which considers different time horizons), as well as the prescriptive apparatus of the Plan through the definition of a toolkit of site-specific design actions oriented towards urban adaptation. The proposed methodology is verified on the case study of Isola Sacra, Fiumicino (Italy), and it is intended to be applicable to other territorial contexts. The research aims to outline guidelines for updating urban planning tools from a climate-proof perspective to promote long-term resilient urban development in risk-prone areas.

This paper examines the influence of informal competition on SMEs innovation in the Eastern European transition economies. It investigates whether credit constraints mediate this relation. SMEs innovation is presented through four measures: Product innovation, Process innovation, Radical innovation and Green innovation. Using the BEEPs VI that covers the period from 2018-2020, we show that informal competition affects positively the product, process and radical innovation. Yet, it has a non-significant effect on green innovation. Besides, the informal sector increases SMEs credit constraints, which indirectly leads to less corporate innovation. The negative indirect effect restrains the positive direct effect. Hence, a partial mediation effect of credit constraints on the informal competition and the innovation proxies is reported with the exception of green innovation.

Reconstructing ancestral species is a challenging endeavour: fossils are often scarce or enigmatic, and inferring ancestral characters based on novel molecular approaches (e.g. comparative genomics or developmental genetics) has long been controversial. A key philosophical challenge pertinent at present is the lack of a theoretical framework capable of evaluating inferences of homology made through integration of multiple kinds of evidence (e.g. molecular, developmental, or morphological). Here, I present just such a framework. I start with a brief history and critical assessment of attempts at inferring morphological homology through developmental genetics. I then bring attention to a recent model of homology, namely Character Identity Mechanisms (DiFrisco, Love, & Wagner, 2020), intended partly to elucidate the relationships between morphological characters, developmental genetics, and homology. I utilise and build on this model to construct the evaluative framework mentioned above, which judges the epistemic value of evidence of each kind in each particular case based on three proposed criteria: effectiveness, admissibility, and informativity, as well as providing a generalised guideline on how it can be scientifically operationalised. I then point out the evolution of the eumetazoan body plan as a case in point where the application of this framework can yield satisfactory results, both empirically and conceptually. I will conclude with a discussion on some potential implications for more general philosophy of biology and philosophy of science, especially surrounding evidential integration, models and explanation, and reductionism.

This study examined the economics of Philippine Lime or Calamansi production in selected Cities and Municipalities in Nueva Ecija, Philippines. The study was conducted within the rural farming households' framework, which constitutes the Philippine agricultural sector's backbone, producing about 5.8 percent of the total national agricultural output with the Central Luzon area, including the portion of the locale of the study. Using quota sampling, data collected from 50 selected calamansi grower- farmers from top 5 producing area in Nueva Ecija, the study measured the profitability of and the production efficiency of calamansi production in the area. Using a formal interview schedule, primary data was obtained from the sampled farming households. The study revealed that the typical calamansi farmer in the area as reflected in the instrument, thirty-two (32) or 64% which covers the majority of the respondents claimed that they fully owned the land they cultivated. Calamansi yield depends on its age as well. Fertilizer was found to harm output. Majority of them shared the same production and post–production practices, though a slight difference in terms of labor cost was observed. There were some who were already in the industry for quite a long time and learned other farming techniques and practices different from the conventional and were proven effective. For better efficiency, the land area cultivated, the farmers' educational status, accessibility to credit facility, and development of the rural areas and farmers' contact with the extension agents are some of the key issues to address. The local government in cities and municipalities may engage in an intensive campaign in encouraging capitalists to form cooperatives, processing and manufacturing houses to produce calamansi juice and other valuable products out of the calamansi fruit.

Literature data on Legionella spp. presence in houses water networks have been increasing during the last years, but epidemiological reports assert a high incidence of Legionnaires’ disease infection in Italy. Updating our previously published data, we report a five-year survey on Legionella spp. colonization in 235 buildings with an independent hot water production (IB); 82 buildings with a central hot water production (CB); and 58 buildings with a solar thermal system for hot water production (TB). In all the 375 buildings Legionella spp. was researched in hot and cold water samples and microbiological potability standards of cold water were evaluated. Legionella spp. was detected in 27% of the water networks, mostly in CB and TB. We detected correlations between the presence of bacteria and some physical-chemical parameters (low chlorine level and optimal temperature for Legionella spp. growth). Cold water resulted free from microbiological hazards, except for coliform bacteria isolated in three separate cases, and Legionella spp., detected when cold water temperature was about 20°C. After a five-year survey we confirm the presence of a Legionnaires’ disease risk and the need of training programs for all the workers involved in residential water systems management.

Industrial pilot projects often rely on proprietary and expensive electronic hardware to control and monitor experiments. This raises costs and retards innovation. Open-source hardware tools exist for implementing these processes individually, however, they are not easily integrated with other designs. The Broadly Reconfigurable and Expandable Automation Device (BREAD) framework provides many open-source devices which can be connected to create more complex data acquisition and control systems. This article explores the feasibility of using BREAD plug-and-play open hardware to quickly design and test monitoring and control electronics for an industrial materials processing prototype pyrolysis reactor. Generally, pilot-scale pyrolysis plants are expensive custom designed systems. The plug-and-play prototype approach is first tested by connecting it to the pyrolysis reactor and ensuring it can measure temperature and actuate heaters and a stirring motor. Next, a single circuit board system was created and tested using the designs from the BREAD prototype to reduce the number of microcontrollers required. Both open-source control systems were capable of reliably running the pyrolysis reactor continuously and the overall cost of control was reduced by more than 10X. Open-source, plug-and-play hardware provides a reliable avenue for researchers to quickly develop data acquisition and control electronics for industrial-scale experiments.

Preprints is a multidisciplinary preprint platform that makes scientific manuscripts from all fields of research immediately available at www.preprints.org. Preprints is a free (not-for-profit) open access service supported by MDPI in Basel, Switzerland.

We are witnessing a dramatic transformation in the way we do science. In recent years, significant flaws with existing scientific methods have come to light, including lack of transparency, insufficient involvement of stakeholders, disconnection from the public, and limited reproducibility of research findings. These concerns have sparked a global movement to revolutionize scientific practice and the emergence of Open Science. This new approach to science extends principles of openness to the entire research cycle, from hypothesis generation to data collection, analysis, replication, and translation from research to practice. Open Science seeks to remove all barriers to conducting high quality, rigorous, and impactful scientific research by ensuring that the data, methods, and opportunities for collaboration are open to all. Emerging digital technologies and "big data" (see "Ten simple rules for responsible big data research") have further accelerated the Open Science movement by affording new approaches to data sharing, connecting researcher networks, and facilitating the dissemination of research findings. Open scientific practices are also having a profound impact on the health sciences and medical research, and specifically how we conduct clinical research with human participants. Human health research necessitates careful considerations for practicing science in an ethical manner. There is also a particular urgency to human health research since the goal is to help people, so doing good science takes on a different meaning than simply doing science well. It also implores the scientist to reassess the conventional view of human health research as a pursuit conducted by scientists on human subjects, and lays a greater emphasis on inclusive and ethical practices to ensure that the research takes into account the interests of those who would be most impacted by the research. Openness in the context of human health research also raises greater concerns about privacy and security and presents more opportunities for people, including participants of research studies, to contribute in every capacity. At the core of open health research, scientific discoveries are not only the product of collaboration across disciplines, but must also be owned by the community that is inclusive of researchers, health workers, and patients and their families. To guide successful open health research practices, it is essential to carefully consider and delineate its guiding principles. This editorial is aimed at individuals participating in health science in any capacity, including but not limited to people living with medical conditions, health professionals, study participants, and researchers spanning all types of disciplines. We present ten simple rules that, while not comprehensive, offer guidance for conducting health research with human participants in an open, ethical, and rigorous manner. These rules can be difficult, resource-intensive, and can conflict with one another. They are aspirational and are intended to accelerate and improve the quality of human health research. Work that fails to follow these rules is not necessarily an indication of poor quality research, especially if the reasons for breaking the rules are considered and articulated (see rule 6: document everything). While most of the responsibility of following these rules falls on researchers, anyone involved in human health research in any capacity can apply them.

We present a discussion and analysis regarding the benefits and limitations of open and non-anonymized peer review based on literature results and responses to a survey on the reviewing process of alt.chi, a more or less open-review track within the CHI conference, the predominant conference in the field of human-computer interaction (HCI). This track currently is the only implementation of an open-peer-review process in the field of HCI while, with the recent increase in interest in open science practices, open review is now being considered and used in other fields. We collected 30 responses from alt.chi authors and reviewers and found that, while the benefits are quite clear and the system is generally well liked by alt.chi participants, they are reluctant to see it used in other venues. This concurs with a number of recent studies that suggest a divergence between support for a more open review process and its practical implementation. The data and scripts are available on https://osf.io/vuw7h/, and the figures and follow-up work on http://tiny.cc/OpenReviews.

Distributed digital manufacturing offers a solution to medical supply and technology shortages during pandemics. To prepare for the next pandemic, this study reviews the state-of-the-art for open hardware designs needed in a COVID-19-like pandemic. It evaluates the readiness of the top twenty technologies requested by the Government of India. The results show that the majority of the actual medical products have had some open source development, however, only 15% of the supporting technologies that make the open source device possible are freely available. The results show there is still considerable work needed to provide open source paths for the development of all the medical hardware needed during pandemics. Five core areas of future work are discussed that include: i) technical development of a wide-range of open source solutions for all medical supplies and devices, ii) policies that protect the productivity of laboratories, makerspaces and fabrication facilities during a pandemic, as well as iii) streamlining the regulatory process, iv) developing Good-Samaritan laws to protect makers and designers of open medical hardware, as well as to compel those with knowledge that will save lives to share it, and v) requiring all citizen-funded research to be released with free and open source licenses.

The paper focuses on the application of a multilevel, integrative and territorial approach to the protection of cultural heritage through planning instruments in Serbia. It points out the problems of the sectoral approach and discusses international recommendations that can be integrated into the planning methodology. The case study is the area of Djerdap National Park, which has an already established international and national importance. The research suggests that the cultural heritage in the area, with the exception of the Roman limes, is still recognized at the level of individual localities. The study emphasizes the importance of aligning all levels of governance to safeguard the whole spatial entity rather than focusing solely on its particular areas. The interna-tional and national importance of the planning area contributes to the strengthening of awareness of heritage and its institutional protection. However, the vitality of the area, which is key to its sustainable development, comes from the local level. Planning documents contribute to the inte-gration of local values and local communities into development programs and projects.

Building Information Modeling (BIM) has been one of the overwhelming trends in the worldwide. In Korea, from 2012, BIM application to the public construction projects worth more than $40 million was mandated. However, despite the policy, many public owners have hesitated to apply BIM to their projects. They generally view BIM very complex to manage and difficult to understand. While there have been diverse BIM guides as a reference, most of them have developed from BIM suppliers’ perspective involving certain deficiency in meeting the public owners’ taste. The public owners have addressed the necessity for developing an owner-oriented BIM guide on which they can understand the overall BIM procurement process thereby efficiently preparing their BIM service contracts. The main objective of this study is to develop the structure and contents guidance of the new guide to be developed that follows the public business process and mitigates the deficiency. To meet the research objective, a number of domestic and international BIM guides were analyzed and workshops were operated twice with the 12 BIM experts from the Korean construction industry. As a result of the study, a four-staged guide structure was developed consisting of the BIM service Scoping, Tendering, Executing, and Wrapping-up (STEW) guides.

This is a paper of Political Economy and Economic Policies into the European Green Deal framework to improve the Recovery Plan post-COVID-19. This paper is focused on the green jobs opportunity for Europe, especially for Spain. It is offered a systematization of concepts and calculations in the issue (attending the international institutions and forums proposals) to harmonize the recovery plans, to apply them beyond the energy sector and to align public and private sector, as well other key stakeholders in achieving this goal. The obtained outcome gives the creation of around 350.000 new green jobs and the necessity of a new workforce reskilled. This result makes necessary to coordinate sectoral plans by the policymakers in which all the involved entities might express their needs and views on the best education approach to renewables sector and green jobs.

This paper presents a new framework to classify floor plan elements and represent them in a vector format. Unlike existing approaches using image-based learning frameworks as the first step to segment the image pixels, we first convert the input floor plan image into vector data and utilize graph neural network. Our framework consists of three steps. (1) image pre-processing and vectorization of the floor plan image. (2) region adjacency graph conversion. (3) graph neural network on converted floor plan graphs. Our approach is able to capture different types of indoor elements including basic elements such as walls, doors, and symbols as well as spatial elements such as rooms and corridors. In addition, the proposed method can also detect element shapes. Experimental results show that our framework can classify indoor elements with an F1 score of 95%, with scale and rotation invariance. Furthermore, we propose a new graph neural network model that takes the distance between nodes into account, which is a valuable feature of spatial network data.

Open-source 3-D printing has played a pivotal role in revolutionizing the additive manufacturing (AM) landscape, by making distributed manufacturing economic, democratizing access, and fostering far more rapid innovation than antiquated proprietary systems. Unfortunately, some 3-D printing manufacturing companies began deviating from open-source principles and violating licenses for the detriment of the community. To determine if a pattern has emerged of companies patenting clearly open-source innovations, this study presents three case studies from the three primary regions of open-source 3-D printing development (EU, U.S. and China) as well as three aspects of 3-D printing technology (AM materials, an open-source 3-D printer, and core open-source 3-D printing concepts used in most 3-D printers). The results of this review have shown that non-inventing entities called patent parasites are patenting open-source inventions already well-established in the open source community and in the most egregious cases commercialized by one (or several) firms at the time of the patent filing. Patent parasites are able to patent open-source innovations by using a different language, vague patent titles and broad claims that encompass enormous swaths of widely diffused open-source innovation space. This practice poses a severe threat to innovation and several approaches to irradicate the threat are discussed.

This study provides designs for a low-cost, easily replicable open source lab-grade digital scale that can be used as a precision balance. The design is such that it can be manufactured for use in most labs throughout the world with open source RepRap-class material extrusion-based 3-D printers for the mechanical components and readily available open source electronics including the Arduino Nano. Several versions of the design were fabricated and tested for precision and accuracy for a range of load cells. The results showed the open source scale was found to be repeatable within 0.1g with multiple load cells, with even better precision (0.01g) depending on load cell range and style. The scale tracks linearly with proprietary lab-grade scales, meeting the performance specified in the load cell data sheets, indicating that it is accurate across the range of the load cell installed. The smallest loadcell tested(100g) offers precision on the order of a commercial digital mass balance. The scale can be produced at significant cost savings compared to scales of comparable range and precision when serial capability is present. The cost savings increase significantly as the range of the scale increases and are particularly well-suited for resource-constrained medical and scientific facilities.

Leisure-time physical activity (LTPA) is associated with access and use of public open spaces. The “President João Goulart Elevated Avenue” and current denominated “Minhocão” is a facility for leisure activities that are open for people during the night/weekends. The aim of this study was to examine if the prevalence of LTPA among individuals living in the surroundings of Minhocão is different according to proximity to, and use of, the facility. We conducted a cross-sectional study with cluster sampling with people aged ≥18 years who lived in households until 500m and between 501m to 1500m of Minhocão. The survey was conducted between December/2017 until March/2019 with an electronic questionnaire self-responded. We conducted bivariate analysis and Poisson regression to examine possible differences in LTPA according to the proximity of residences and use of Minhocão. The analysis used post-stratification weights. A total of 12,030 telephone numbers of people were drawn (≤500m = 6,942; and &gt;500m to ≤1500m = 5,088). The final sample analyzed were of 235 residents who returned the questionnaires. There was a higher prevalence of individuals engaging in at least 150 minutes per week of LTPA among users than non-users (Prevalence Ratio=2.23, IC95%1.72-2.90). People who used the park had higher prevalence of all types of LTPA than non-users. The results can serve to inform government decision-making on the future of Minhocão.

In this comprehensive review, we delve into the realm of intention recognition within the context of digital forensics and cybercrime. The rise of cybercrime has become a major concern for individuals, organizations, and governments worldwide. Digital forensics is a field that deals with the investigation and analysis of digital evidence in order to identify, preserve, and analyze information that can be used as evidence in a court of law. Whereas, Intention recognition is a subfield of artificial intelligence that deals with the identification of agents’ intentions based on their actions and change of states. In the context of cybercrime, intention recognition can be used to identify the intentions of cybercriminals and even to predict their future actions. Employing a meticulous six-step systematic review approach, we curated research articles from reputable journals and categorized them into three distinct modeling approaches: logic-based, classical machine learning-based, and deep learning-based. Notably, intention recognition has transcended its historical confinement to network security, now addressing critical challenges across various subdomains, including social engineering attacks, AI black box vulnerabilities, and physical security. While deep learning emerges as the dominant paradigm, its inherent lack of transparency poses unique challenges in the digital forensics landscape. We advocate for hybrid solutions that blend deep learning’s power with interpretability. Furthermore, we propose the creation of a comprehensive taxonomy to precisely define intention recognition, paving the way for future advancements in this pivotal field.

In order to deal with imprecision, ambiguity, and uncertainty in data analysis, Pawlak introduced rough set theory in 1982. This paper aims to expand the scope of basic set theory developed by presenting the notions of δP-upper and δP-lower approximations, that are based on the notion of δP-open sets, we additionally examine a few of their fundamental characteristics.

The terms 'open' and 'openness' are widely used across the current higher education environment particularly in the areas of repository services and scholarly communications. Open-access licensing and open-source licensing are two prevalent manifestations of open culture within higher education research environments. As theoretical ideals, open-licensing models aim at openness and academic freedom. But operating as they do within the context of global neoliberalism, to what extent are these models constructed by, sustained by, and co-opted by neoliberalism? In this paper, we interrogate the use of open-licensing within scholarly communications and within the larger societal context of neoliberalism. Through synthesis of various sources, we will examine how open access licensing models have been constrained by neoliberal or otherwise corporate agendas, how open access and open scholarship have been reframed within discourses of compliance, how open-source software models and software are co-opted by politico-economic forces, and how the language of 'openness' is widely misused in higher education and repository services circles to drive agendas that run counter to actually increasing openness. We will finish by suggesting ways to resist this trend and use open-licensing models to resist neoliberal agendas in open scholarship.

The research field of energy system analysis is dealing with increasingly complex energy systems and their respective challenges. Moreover, the requirement for open science has become a focal point of public interest. Both drivers have triggered the development of a broad range of (open) energy models and frameworks in recent years. However, there are hardly any approaches on how to evaluate these tools in terms of their capabilities to tackle energy system modelling challenges. This paper describes a first step towards a flexible evaluation of software to model energy systems. We propose a qualitative approach as an useful supplementary to existing model fact sheets and transparency checklists. We demonstrate the applicability by evaluating the newly developed “Open Energy Modelling Framework” with respect to existing challenges in energy system modelling. The case study results highlight that challenges related to complexity and scientific standards can be tackled to a large extent while the challenges of model utilization and interdisciplinary modelling are only tackled partially. However, the challenge of uncertainty remains for the most part unaddressed at present. Advantages of the evaluation approach lie in its simplicity, flexibility and transferability to other tools. Disadvantages mostly stem from its qualitative nature. Our analysis reveals that some challenges in the field of energy system modelling cannot be addressed by a software as they are on meta level like model result communication and interdisciplinary modelling.

This study was conducted to propose the Green Economic Development Plan for Manufacturing S.M.E.s based on financial performance and operations thru Green Initiatives. The descriptive survey method used to gather data to determine the green initiative's implementation of small and medium (S.M.E.s) manufacturing enterprises. Green initiatives use as a basis for crafting a green economic development plan. Document analysis was also employed to obtain data from any available printed materials and records provided by the respondents. Such methods of gathering information used to validate data gathered from local and foreign-related literature. The observation also employed to survey the assets owned and validate any green initiatives practiced, including their implementation. The study's findings show that among the green initiatives implemented by SMMEs, which resulted in the reduction of total costs and expenses, were the proper disposal and segregation of waste materials, water management by recycling wastewater and using water-efficient equipment, natural resources, and raw materials management. SMMEs should encourage active participation and support of suppliers and customers in achieving G.E.D.'s objectives by developing incentive schemes.Furthermore, SMMEs should continue to benchmark with G.E.D. Practitioners are operating locally and abroad to adopt best greening strategies and regularly network with concerned government agencies for continuous updating on G.E.D. Initiatives that may benefit the firm. Further research may be conducted on green initiatives implemented by small and medium enterprises in other industry sectors.

The evaluation was conducted to find out whether the stipulated objectives of the policy are being followed, and at the same time find out whether the envisioned results of implementing such policy system have been achieved so far. The evaluation was expected to provide an opportunity for mending shortfalls of the whole system that would affect its sustainability and usefulness.A total of 33 participants were interviewed in this study and came from the study area (Nkhotakota District Council Office). Purposive sampling was used to select the participants. All study respondents were purposively selected where respondents considered having relevant information and they were interviewed to obtain wide range of perspectives.Seven themes were identified; knowledge on policy, limited stakeholder involvement, poor HIV and AIDS programming, ethical issues, future perspective of the policy, Other Recurrent Transaction (ORT) allocation, and availability of HIV and AIDS Committee. On knowledge on policy, the sub-themes included; objectives well outlined, and poor updates on the policy. On limited stakeholder involvement, the sub-themes were; lack of ownership, ignorance of involvement, and not involved/limited involvement. On the Poor HIV and AIDS programming theme, sub-themes identified were; exclusion of activities in the District Implementation Plan (DIP) and lack of funds. There was one sub-theme on ethical issues and future perspective.We found that the Nkhotakota District Council HIV and AIDS at workplace policy is not functioning properly due to poor coordination and lack of funding. However, there are some positives identified such as existence of the coordinating committee and allocation of funds through ORT. Although the system has been functional for some years in well-established structures, lack of participation by some stakeholders, non-inclusion of HIV and AIDS activities in the DIPs underpin its sustainability

We introduce Get Free Copy (getfreecopy.com), a web-based platform designed to streamline the search for biomedical literature across major repositories like arXiv, bioRxiv, medRxiv, and PubMed Central (PMC). Addressing challenges posed by paywalls and fragmented databases, it offers a unified interface for efficient retrieval of free, legitimate copies of biomedical literature. The platform's implementation involves a Node.js backend and dynamic front-end display, enhancing accessibility and research efficiency. As an open-source project, Get Free Copy represents a significant contribution to the open-access movement, inviting global researcher collaboration for further development.

Forest recreation can be successfully used for the psychological relaxation of respondents and can be used as a remedy for common problems with stress. The special form of forest recreation intended for restoration is forest bathing. These activities might be distracted by some factors, such as viewing buildings in the forest or using a computer in nature, which interrupt psychological relaxation. One factor that might interrupt psychological relaxation is the occurrence of an open dump in the forest during an outdoor experience. To test the hypothesis that an open dump might decrease psychological relaxation, a case study was planned that used a randomized, controlled crossover design. For this purpose, two groups of healthy young adults viewed a control forest or a forest with an open dump in reverse order and filled in psychological questionnaires after each stimulus. A pretest was used. Participants wore oblique eye patches to stop their visual stimulation before the experimental stimulation, and the physical environment was monitored. The results were analyzed using the two-way repeated measures ANOVA. The measured negative psychological indicators significantly increased after viewing the forest with waste, and the five indicators of the Profile of Mood States increased: Tension-Anxiety, Depression-Dejection, Anger-Hostility, Fatigue, and Confusion. In addition, the negative aspect of the Positive and Negative Affect Schedule increased in comparison to the control and pretest. The measured positive indicators significantly decreased after viewing the forest with waste, the positive aspect of the Positive and Negative Affect Schedule decreased, and the Restorative Outcome Scale and Subjective Vitality scores decreased (in comparison to the control and pretest). The occurrence of an open dump in the forest might interrupt a normal restorative experience in the forest by reducing psychological relaxation. Nevertheless, the mechanism of these relevancies is not known, and thus, it will be further investigated. In addition, in a future study, the size of the impact of these open dumps on normal everyday experiences should be investigated. It is proposed that different mechanisms might be responsible for these reactions; however, the aim of this manuscript is to only measure this reaction. The identified psychological reasons for these mechanisms can be assessed in further studies.

In December 2012, DOAJ’s parent company, IS4OA, announced they would introduce new criteria for inclusion in DOAJ [1] and that DOAJ would collect vastly more information from journals as part of the accreditation process – and that journals already included, would need to reapply in order to be kept in the registry. My hypothesis was that the journals removed from DOAJ on May 9th 2016 would chiefly be journals from small publishers (mostly single journal publishers) and that DOAJ journal metadata information would reveal that they were journals with a lower level of publishing competence than those that would remain in the DOAJ. Among indicators of publishing competence could be the use of APCs, permanent article identifiers, journal licenses, article level metadata deposited with DOAJ, archiving policy/solutions and/or having a policy in SHERPA/RoMEO. The analysis shows my concerns to be correct.

Chemistry is the last natural science discipline to embrace prepublishing, namely the publication of non-peer reviewed scientific articles on the internet. After a brief insight into the origins and the purpose of prepublishing in science, we conduct a concrete analysis of the concrete situation, aiming at providing an answer to several questions. Why the chemistry community has been late in embracing prepublishing? Is this in relation with the slow acceptance of open access publishing by the same community? Will prepublishing become a common habit also for chemistry scholars?

Due to resource constraints, most Diamond Open Access journals publish less than 25 articles per year, and 75% of journals are not able to provide their content in XML and HTML, primarily providing only PDFs (Bosman et al., 2021, p. 7-8). In order to keep up with larger commercial publishers, a high degree of automation and streamlining of processes is necessary. The Open Source Academic Publishing Suite (OS-APS) project funded by the German Federal Ministry of Education and Research aims to achieve this. OS-APS automatically extracts the underlying XML from Word manuscripts and offers optimization and export options in various formats (PDF, HTML, EPUB). The professional corporate design, e.g., of the PDFs, is managed automatically by using templates or creating one's own using a Template Development Kit. OS-APS will also connect to scholarly-led and community-driven publishing platforms such as Open Journal Systems (OJS), Open Monograph Press (OMP), and DSpace: the software will be able to be integrated into a wide range of publication processes, whether at small, low-resource commercial Open Access Publishers, or institutional and Diamond Open Access Publishers. References: Bosman, J., Frantsvåg, J. E., Kramer, B., Langlais, P.‑C., &amp; Proudman, V. (2021). Oa Diamond Journals Study. Part 1: Findings. https://doi.org/10.5281/zenodo.4558703

The study investigated the usage of open data in public organizations, focusing on the motives, preferences, and governance ideals that determine their quality. The study shed light on how open data platforms are created and improved, as well as their influence on government operations. The primary goal was to understand the motivations behind the usage of open data, evaluate gov-ernance ideals, and examine institutions' efforts to standardize data formats. Hierarchical regres-sion analysis divides variables into core reasons and different preferences, demonstrating a need for "diversification" in order to use open data effectively. Efficiency, accountability, community impact, knowledge, and high-quality service delivery are all emphasized in governance value analysis. The institution's dedication to standardizing open data formats is evidenced by legislative measures and the integration of many technologies. The findings illustrate the institution's dual strategy of em-ploying traditional techniques and new technologies for effective data management. The report suggests increasing data openness and standardization, investing in ongoing training, upgrading alerting and awareness systems, and adopting specific regulations for open data use. Monitoring and feedback techniques are critical for adjusting and refining open data services to satisfy de-velopment needs. This study adds to the scientific knowledge of open data use by highlighting important motives, preferences, and governance ideals. The offered guidelines provide practical insights for public organizations looking to improve their open data platforms by promoting openness, efficiency, and community participation.

To stabilize the Earth’s climate a large-scale transition is needed to non-carbon emitting renewable energy technologies like wind and solar energy. Although these renewable energy sources are now lower-cost than fossil fuels, their inherent intermittency make them unable to supply a constant load without storage. To address these challenges rechargeable electric batteries are currently the most promising option; however, their high capital costs limit current deployment velocities. To both reduce the cost as well as improve performance 3D printing technology has emerged as a promising solution. This literature review provides the state-of-the-art enhancements of battery properties with 3D printing including efficiency, mechanical stability, energy and power density, customizability and sizing, production process efficiency, material conservation and environmental sustainability as well as the progress in solid-state batteries. The principles, advantages, limitations, and recent advancements associated with the most common types of 3D printing are reviewed focusing on their contributions to the battery field. 3D printing batteries offer design flexibility, material flexibility, reduces pack weight, minimizes material waste, increases the range of applications and has the potential to reduce costs. As 3D printing technologies become more accessible, the prospect of cost-effective production for customized batteries is extremely promising.

In several Indonesian tropical cities, such as Makassar City, frequent flooding during the peak rainy season poses a significant challenge. This study seeks to address this issue by devising effective policies to reduce flood exposure. The main obstacle lies in accurately determining the flood inundation area. To overcome this, the study utilizes multiple satellite data sources on a cloud platform, integrating them with land use data, and DEM data, aligning these with the local government's urban land use plan and existing drainage networks. The research aims to quantify the affected area, identify the predominant inundated land cover, and assess the efficiency of Makassar's drainage system and urban land use plan. The study reveals that an uncoordinated drainage system in the Tamalanrea, Biringkanaya, and Mangala sub-districts results in severe flooding, encompassing a total area of 35.28 km². The most affected land use type is cultivation, constituting approximately 43.5% of the flooded area. Furthermore, 82.26% of the urban land use plan, covering 29.02 km², is submerged. It is imperative for the local government and stakeholders to prioritize the enhancement of drainage systems and urban land use plans, particularly in low-lying and densely populated regions

contaminated sites located in each school district. Previous studies showed that various environmental factors, such as exposure to toxic substances negatively impacts human health depending on their concentration and occurrence. Therefore, the study aims to use Geographical Information System (GIS) technology and secondary data on IEP numbers of each school district, chemical occurrence in contaminated sites, and demographic data to conduct a correlational analysis. The secondary data obtained from school districts and contaminated sites from Iowa Department of Natural Resources Facility Explorer were populated in ArcMap 10.5 (a GIS software) for generating maps and data to conduct statistical analysis. The contaminants were categorized into metals, polyaromatic hydrocarbons (PAH), and solvents with weighing factors as 1, 0.5, and 0.25. A total of 1 Superfund site and 39 CERCLA sites were identified as contaminated sites for this study. The majority of contaminants were heavy metals such as lead, arsenic, mercury, and cadmium. The mean toxic score of all contaminated sites combined was 13.4 (sd 14.4). The correlational analysis between the IEP numbers from each school districts and toxic scores from the contaminated sites was positive indicting that increased toxic score increased the number of students enrolled in the IEP program (F=23.7, p<0.0001). The correlational analysis between toxic score and demographics indicated some interesting results. Children under the age of 10 were living in areas with high toxic score and the showed mild correlation (p<0.00052). Similarly, higher number of black population resided in areas with high toxic score (p=0.0032) than the white population (p<0.0001). The result also indicated that children enrolled in IEP were predominantly among the black population (p<0.0001). The correlational analysis between household income and poverty percentage of people residing near the contaminated area indicated that people had low average household income (p=0.0002) and high poverty percentage (p=0.0203) residing in areas with higher toxic score. Regarding the educational status, less number of people with post graduate degree (p<0.0001) resided in areas with high toxic score and more number of people with no degree (p<0.0001) resided in areas with high toxic score. Finally, the study showed the increasing trend of eligible children enrolling in free and reduced lunch programs with increasing toxic scores (p=0.0012) and IEP levels (p=0.0416). This study emphasize on developing multiple exposure to correlate environmental factors contributing to the negative health outcome on people.

There is a growing consensus that to effectively adapt to climate change, cities need user-friendly tools and reliable high-resolution biophysical and socio-economic data for analysis, mapping, modeling, and visualization. This study examines availability of various types of information used in climate adaptation plans of 40 municipalities with population less than 300,000 people in the United and in France, probing into the choice and usage of relevant information by small municipalities. We argue that non-climatic spatial data, such as population demographic and socio-economic patterns, urban infrastructure, and environmental data must be integrated with climate tools and datasets to inform effective vulnerability assessment and equitable climate adaptation planning goals. Climate adaptation plans frequently fail to address the existing structural inequalities and environmental injustices in urban infrastructure and land use. Adaptation methodological approaches should be reassessed in the context of much needed societal transformation. Lessons learned from our studies offer valuable insights for potential development of the national and state-level climate adaptation information services for cities.

Research has been growing on object detection using semi-supervised methods in past few years. We examine the intersection of these two areas for floor-plan objects to promote the research objective of detecting more accurate objects with less labelled data. The floor-plan objects include different furniture items with multiple types of the same class, and this high inter-class similarity impacts the performance of prior methods. In this paper, we present Mask R-CNN based semi-supervised approach that provides pixel-to-pixel alignment to generate individual annotation masks for each class to mine the inter-class similarity. The semi-supervised approach has a student-teacher network that pulls information from the teacher network and feeds it to the student network. The teacher network uses unlabeled data to form pseudo-boxes, and the student network uses both unlabeled data with the pseudo boxes and labelled data as ground truth for training. It learns representations of furniture items by combining labelled and unlabeled data. On the Mask R-CNN detector with ResNet-101 backbone network, the proposed approach achieves mAP of 98.8%, 99.7%, and 99.8% with only 1%, 5% and 10% labelled data, respectively. Our experiment affirms the efficiency of the proposed approach as it outperforms the fully supervised counterpart using only 10% of the labels.

The River Basin Management Plan (RBMP) is an essential component of the European Union Water Framework Directive that details an integrated approach required to protect, improve and sustainably manage water resources. RBMP were intended to be produced for the periods 2009-2015, 2016-2021 and 2022-2027. However, after two years of delays in the development processes, the Republic of Ireland produced its first RBMP in 2010. The second RBMP cycle was also implemented in 2018 and is expected to run until the end of 2021 to give way to the third RBMP, whose consultation processes have been ongoing since December 2019. This paper contributes to the forthcoming RBMP by assessing stakeholders’ perspectives on the second RBMP through a desk-based review and by conducting interviews with nine institutions (14 interviewees). The qualitatively analysed interviews reveal a broad spectrum of actors associated with water management and governance in the Republic of Ireland through a three-tier governance structure that has been delivered (with amendment) through the first two RBMPs. Organisations such as the An Fóram Uisce|The Water Forum, the Environmental Protection Agency, the Local Authority Waters, and the Agricultural Sustainability Support and Advisory Programme have responsibilities designated in the RBMPs to deliver improved water quality, integrated catchment management, community engagement and awareness-raising. Trust has also been building up among these organisations and other agencies in the water sector. Despite these responsibilities and progress, the interviews identified communication lapses, ineffective collaboration and coordination among stakeholders and late implementation to be hampering the successful delivery of the second RBMP, in addition to significant pressures acting on water bodies from agricultural activities and urban wastewater treatment. Towards the third RBMP, the paper concludes that optimised water sector finance, enhanced and well-resourced communications, and improved stakeholder collaboration are needed to foster effective and efficient water services delivery and quality. More so, given the cross-cutting impact of the Sustainable Development Goals on water resources and the interconnected relations among the goals, the paper further recommends the integration of the SDGs in the various plans of actions and a co-benefits approach to derive the triple benefits from biodiversity, climate change initiatives and water quality measures.

Thermal sterilization is generally avoided for 3-D printed components because of the relatively low deformation temperatures for common thermoplastics used for material extrusion-based additive manufacturing. 3-D printing materials required for high-temperature heat sterilizable components for COVID-19 and other applications demands 3-D printers with heated beds, hot ends that can reach higher temperatures than polytetrafluoroethylene (PTFE) hot ends and heated chambers to avoid part warping and delamination. There are several high temperature printers on the market, but their high costs make them inaccessible for full home-based distributed manufacturing required during pandemic lockdowns. To allow for all these requirements to be met for under $1,000, the Cerberus – an open source three-headed self-replicating rapid prototyper (RepRap) was designed and tested with the following capabilities: i) 200^oC-capable heated bed, ii) 500^oC-capabel hot end, iii) isolated heated chamber with 1kW space heater core and iv) mains voltage chamber and bed heating for rapid start. The Cereberus successfully prints polyetherketoneketone (PEKK) and polyetherimide (PEI, ULTEM) with tensile strengths of 77.5 and 80.5 MPa, respectively. As a case study, open source face masks were 3-D printed in PEKK and shown not to warp upon widely home-accessible oven-based sterilization.

Walking of humanoid robots is dependent on precise tracking of the center of gravity and foot trajectories. Trajectory tracking is achieved by mobilizing the robot joints to produce the correct trajectory. Errors are being occurred because of assumptions on tracking the center of gravity and the foot trajectories. In this study, a numerical algorithm has been developed that produces an exact and single kinematic solution in which the center of gravity and foot trajectories can be tracked with the desired precision. The effectiveness of the algorithm was examined with a dynamic simulation and compared with the method given in the literature The main highlight of this study, using the presented algorithm, the robot can walk even if the position of its center of gravity is lower than its hips, resulting tracking error was smaller than reported in the literature.

This study aimed to identify the most beneficial attitudes adopted by enterprise participants during their engagement in open-source software (OSS) activities. For this purpose, we selected repositories from GitHub, featuring the top 10 with the highest stars and forks, classified the participants according to their sentiment states, and compared their productivity. The results indicated that participants with positive sentiments were more productive than those with negative sentiments. Consequently, it can be inferred that encouraging organizations to express positive sentiments towards their developers publicly may stimulate OSS community activities and enhance productivity, thereby potentially leading to increased open innovation and sustainability.

This proposal describes the design and development of an interoperable application that supports green open access with long-term sustainability and improved user experience of article deposit. Introduction: The lack of library resources and unfriendly repository user interface are two significant barriers that hinder green open access. Tasked to implement the open access mandate, librarians at an American research university developed a comprehensive system called Easy Deposit 2 to automate the support workflow of green open access. Implementation: Easy Deposit 2 is a web application that is able to harvest newly publications, outreach for manuscript on behalf of the library, and facilitate self-archiving to IR. It is developed and maintained by the library and integrated with the IR. Results and Discussion: The article deposit rate is about 25% with Easy Deposit 2, which increases significantly comparing to the previous period. It also serves as a local database for faculty publications with open access status. The lesson learned is that library cannot rely on a single commercial provider for publication data due to mismatched priorities. Conclusion: Recent IT developments provides new opportunities of innovation like Easy Deposit 2 in supporting open access. Academic librarians are vital in promoting "openness" in scholarly communication such as transparency and diversity in the sharing of publication data.

The number of documents published on the Web other languages than English grows every year. As a consequence, it increases the necessity of extracting useful information from different languages, pointing out the importance of researching Open Information Extraction (OIE) techniques. Different OIE methods have been dealing with features from a unique language. On the other hand, few approaches tackle multilingual aspects. In such approaches, multilingual is only treated as an extraction method, which results in low precision due to the use of general rules. Multilingual methods have been applied to a vast amount of problems in Natural Language Processing achieving satisfactory results and demonstrating that knowledge acquisition for a language can be transferred to other languages to improve the quality of the facts extracted. We state that a multilingual approach can enhance OIE methods, being ideal to evaluate and compare OIE systems, and as a consequence, to applying it to the collected facts. In this work, we discuss how the transfer knowledge between languages can increase the acquisition from multilingual approaches. We provide a roadmap of the Multilingual Open IE area concerning the state of the art studies. Additionally, we evaluate the transfer of knowledge to improve the quality of the facts extracted in each language. Moreover, we discuss the importance of a parallel corpus to evaluate and compare multilingual systems.

Universities, like cities, have embraced novel technologies and data-based solutions to improve their campuses with ‘smart’ becoming a welcomed concept. Campuses in many ways are small-scale cities. They increasingly seek to address similar challenges and to deliver improved experiences to their users. How can data be used in making this vision a reality? What can we learn from smart campuses that can be scale up to smart cities? A short research study was conducted over a three-month period at a public university in the United Kingdom employing stakeholder interviews and user surveys, aiming at gaining insight into these questions. Based on the study, the authors suggest that making data publicly available could bring many benefits to different groups of stakeholders and campus users. These benefits come with risks and challenges such as data privacy and protection and infrastructure hurdles. However, if these challenges can be overcome, open data could contribute significantly to improving campuses and user experiences, and potentially set an example for smart cities.

This paper explores whether preprints can better support open science by providing links to other early-stage research outputs. This potentially has benefits for transparency and discoverability of research projects. By looking at preprint submission systems, online preprints and surveying those who run preprint servers, I examined to what extent this is currently possible. No preprints server provided a complete service, however many allowed the linking of several open science elements from the abstract page. I looked at variation based on subject, age, and size of preprint server. In conclusion, authors posting preprints should consider the options provided by different preprint servers. It appears that open science is just one focus of preprint servers and further improvements will be dependent on preprint server policies and priorities rather than overcoming any technical difficulties.

The implementation of the European Cohesion Policy aiming at fostering regions competitiveness, economic growth and creation of new jobs is documented over the period 2014–2020 in the publicly available Open Data Portal for the European Structural and Investment funds. On the base of this source, this paper aims at describing the process of data mining and visualization for information production on regional programmes performace in achieving effective expenditure of resouces.

Network effects, economies of scale, and lock-in-effects increasingly lead to a concentration of digital resources and capabilities, hindering the free and equitable development of digital entrepreneurship (SDG9), new skills, and jobs (SDG8), especially in small communities (SDG11) and their small and medium-sized enterprises (“SMEs”). To ensure the affordability and accessibility of technologies, promote digital entrepreneurship and community well-being (SDG3), and protect digital rights, we propose data cooperatives [1,2] as a vehicle for secure, trusted, and sovereign data exchange [3,4]. In post-pandemic times, community/SME-led cooperatives can play a vital role by ensuring that supply chains to support digital commons are uninterrupted, resilient, and decentralized [5]. Digital commons and data sovereignty provide communities with affordable and easy access to information and the ability to collectively negotiate data-related decisions. Moreover, cooperative commons (a) provide access to the infrastructure that underpins the modern economy, (b) preserve property rights, and (c) ensure that privatization and monopolization do not further erode self-determination, especially in a world increasingly mediated by AI. Thus, governance plays a significant role in accelerating communities’/SMEs’ digital transformation and addressing their challenges. Cooperatives thrive on digital governance and standards such as open trusted Application Programming Interfaces (APIs) that increase the efficiency, technological capabilities, and capacities of participants and, most importantly, integrate, enable, and accelerate the digital transformation of SMEs in the overall process. This policy paper presents and discusses several transformative use cases for cooperative data governance. The use cases demonstrate how platform/data-cooperatives, and their novel value creation can be leveraged to take digital commons and value chains to a new level of collaboration while addressing the most pressing community issues. The proposed framework for a digital federated and sovereign reference architecture will create a blueprint for sustainable development both in the Global South and North.

The research proposes a self-directed paradigm with self-design using the existing technology with LMS modules, discussions, and self-tests. The research establishes its criteria for assurance of teaching and learning known as 7x2C for the compliance of content, and appearance along with other criteria for the analysis. The above technology of web and LMS is tested for a business course that is technology-oriented in creating an experiential learning system for Covid-19 awareness. Similarly, among other ideas, an environment for educating learners about diabetes and obesity has been designed. The project is known as Sunchoke with its theme of Grow, Eat, and Heal. The educators can use their technology and apply self-directed pedagogy to transform this approach to their customized ways by using their content and rubrics.

In this paper we investigate the optimal investment strategy for a defined contribution (DC) pension plan during the decumulation phrase which is risk-averse and pays close attention to inflation risk. The plan aims to maximize the expected constant relative risk aversion (CRRA) utility from the terminal wealth by investing the wealth in a financial market consisting of an inflation-indexed bond, an ordinary zero coupon bond and a risk-free asset. We derive the optimal investment strategy in closed-form using the dynamic programming approach by solving the corresponding Hamilton-Jacobi-Bellman (HJB) equation. Our theoretical and numerical results reveal that under some rational assumptions, an inflation-indexed bond do has significant advantage to hedge inflation risk.

Open science, accessibility and knowledge sharing, especially of articles and monographs stemming from a publicly funded research, seem to be quite a positive direction in the development of science and have received almost unanimous approval from a scientific community. However, when it comes to data sharing, the data obtained by qualitative methodology deserve special attention and treatment. Although FAIR principles provide ways to anonymise the data and interlocoutors (as explained in Celjak et al 2020) individuals coming from smaller communities or even communities of practice can sometimes be easily regcognized by members of the same communitiy, especially if the data refers to audio files! The researcher is obliged to thoroughly describe the ways in which the data will be managed and used, and if it will state that the data will be managed in line with FAIR principles, this will inevitably impact the narratives collected. The prerogative to make all the data open will inevitably lead to autocesorship i.e. in creating a kind of FAIRy Tales for the future, interlocutors will share with researchers. Having all that in mind I argue for a more vigilant approach when embracing the idea that all the data should be made FAIR. Not all the data should be made FAIR because this could, in the end, compromise the research process itself. Some data must remain in the space of trust created between main actors in the research process. These data should be treated with CARE principles.

Centrifuges are commonly required devices in medical diagnostics facilities as well as scientific laboratories. Although there are commercial and open source centrifuges, costs of the former and required electricity to operate the latter, limit accessibility in resource-constrained settings. There is a need for low-cost, human-powered, verified and reliable lab-scale centrifuge. This study provides the designs for a low-cost 100% 3-D printed centrifuge, which can be fabricated on any low-cost RepRap-class fused filament fabrication (FFF) or fused particle fabrication (FPF)-based 3-D printer. In addition, validation procedures are provided using a web camera and free and open source software. This paper provides the complete open source plans including instructions for fabrication and operation for a hand-powered centrifuge. This study successfully tested and validated the instrument, which can be operated anywhere in the world with no electricity inputs obtaining a radial velocity of over 1750rpm and over 50N of relative centrifugal force. Using commercial filament the instrument costs about US$25, which is less than half of all commercially available systems; however, the costs can be dropped further using recycled plastics on open source systems for over 99% savings. The results are discussed in the contexts of resource-constrained medical and scientific facilities.

Visits to coastal and inland-waterways have strong associations with many health and economic benefits but are also opportunities for exposure to environmental pollution. In England, few balanced survey samples exist which can facilitate accurate identification of correlates with recreation in blue spaces. This information could support risk assessment for likelihood of exposure and message targeting in case of environmental threats. We process data from a recent (2022-2023) and large (n = 177,551) survey of English residents to describe demographic, seasonal and regional correlates with any participation in water-based recreational activities in previous year (logistic regression model), and in the previous 28 days (zero-inflated negative binomial regression). Activities studied were: surfing and paddleboarding; open water swimming; scuba-diving and snorkelling; canoeing and kayaking; angling. Summer was associated with most frequent participation, winter with fewest sessions except for rowing. Anglers were group most likely to be socially vulnerable: less likely to be university educated, more likely to be disabled and especially likely to be male. People resident in rural locations were more likely to participate at least once in prior year, but did not have higher participation rates in the previous 28 days. Regional variations in specific activities may suggest where demand for water recreation is unmet. The results provide a reference description of outdoor water-recreationalists doing specific types of activity in England and may be useful when designing emergency messages and otherwise setting policy with regard to management of microbiological, radiological or chemical hazards in coastal and inland waters.

Untargeted metabolomics is a powerful tool for measuring and understanding complex biological chemistries. However, employment, bioinformatics and downstream analysis of mass spectrometry (MS) data can be daunting for inexperienced users. Numerous open-source and free-to-use data processing and analysis tools exist for various untargeted MS approaches, including liquid chro-matography (LC), but choosing the ‘correct’ pipeline isn’t straight-forward. This tutorial, in con-junction with a user-friendly online guide presents a workflow for connecting these tools to process, analyse and annotate various untargeted MS datasets. The workflow is intended to guide explor-atory analysis in order to inform decision-making regarding costly and time-consuming down-stream targeted MS approaches. We provide practical advice concerning experimental design, organisation of data and downstream analysis, and offer details on sharing and storing valuable MS data for posterity. The workflow is editable and modular, allowing flexibility for updated/ changing methodologies and increased clarity and detail as user participation becomes more common. Hence, the authors welcome contributions and improvements to the workflow via the online repository. We believe that this workflow will streamline and condense complex mass-spectrometry approaches into easier, more manageable, analyses thereby generating opportunities for researchers previously discouraged by inaccessible and overly complicated software.

There is great current interest in systems represented by non-Hermitian Hamiltonians, including a wide variety of real systems that may be dissipative and whose behaviour can be represented by a "phase" parameter that characterises the way "exceptional points" (singularities of various sorts) determine the system. These systems are briefly reviewed with an emphasis on their geometrical thermodynamics properties.

There is great current interest in systems represented by non-Hermitian Hamiltonians, including a wide variety of real systems that may be dissipative and whose behaviour can be represented by a "phase" parameter that characterises the way "exceptional points" (singularities of various sorts) determine the system. These systems are briefly reviewed with an emphasis on their geometrical thermodynamics properties.

Microalgae biomass is a budding raw material for the origination of food, fuel, and other value-added products. However, bulk production of microalgal biomass at commercial level is a herculean task for the current microalgal mass production technologies due to the undesirable contaminations by biological pollutants. These contaminants hamstring the production of microalgae biomass by debilitating the growth of cultures, crumble the quality of biomass and sometimes may crash the whole culture. The best utilization of the microalgae biomass at industrial level could be attained by avoiding various possible biological contaminations in mass cultivation system, understanding the contamination mechanisms, and the complex interactions of algae with other microorganisms. This review explores the various types of biological pollutants, their possible mode of infection along with mechanisms, different controlling methods to maintain desired microalgae culture.

The Open Access (OA) publishing model that is based on article processing charges (APC) is often associated with the potential for more transparency regarding the expenditures for publications. However, the extent to which transparency can be achieved depends not least on the completeness of data in APC monitoring systems. This article investigates two blind spots of the largest collection of APC payment information, OpenAPC. It aims to identify likely APC-liable publications for German universities that contribute to this system and for those that do not provide data to it. The calculation combines data from Web of Science, the ISSN-Gold-OA-list and OpenAPC. The results show that for the group of universities contributing to the monitoring system, more than half of the APC payments are not covered by it and the average payments for non-covered APCs is higher than for APCs covered by the system. In addition, the group of universities that does not contribute to OpenAPC accounts for two thirds of the number of APC-liable publications recorded for contributing universities. Regarding the size of these blind spots, the value of the monitoring system is limited at present.

This paper presents the validation of the End Point Rate (EPR) tool for QGIS (EPR4Q), a tool built-in QGIS Graphical Modeler to calculate the shoreline change by End Point Rate method. The EPR4Q tries to fill the gap of user-friendly and free open-source tool for shoreline analysis in Geographic Information System environment, since the most used software - Digital Shoreline Analysis System (DSAS) - although is a free extension, is suited for commercial software. Besides, the best free open-source option to calculate EPR called Analyzing Moving Boundaries Using R (AMBUR), since it is a robust and powerful tool, the complexity and heavy processes can restrict the accessibility and simple usage. The validation methodology consists of applying the EPR4Q, DSAS, and AMBUR on different examples of shorelines found in nature, extracted from the U.S. Geological Survey Open-File. The obtained results of each tool were compared with Pearson correlation coefficient. The validation results indicate that the EPR4Q tool created acquired high correlation values with DSAS and AMBUR, reaching a coefficient of 0.98 to 1.00 on linear, extensive, and non-extensive shorelines, guarantying that the EPR4Q tool is ready to be freely used by the academic, scientific, engineering, and coastal managers communities worldwide.

Introduction: The Pandemic of COVID-19, an infectious disease caused by SARS-CoV-2 motivated the scientific community to work together in order to gather, organize, process and distribute data on the novel biomedical hazard. Here, we analyzed how the scientific community responded to this challenge by quantifying distribution and availability patterns of the academic information related to COVID-19. The aim of our study was to assess the quality of the information flow and scientific collaboration, two factors we believe to be critical for finding new solutions for the ongoing pandemic. Materials and methods: The RISmed R package, and a custom Python script were used to fetch metadata on articles indexed in PubMed and published on Rxiv preprint server. Scopus was manually searched and the metadata was exported in BibTex file. Publication rate and publication status, affiliation and author count per article, and submission-to-publication time were analysed in R. Biblioshiny application was used to create a world collaboration map. Results: Our preliminary data suggest that COVID-19 pandemic resulted in generation of a large amount of scientific data, and demonstrates potential problems regarding the information velocity, availability, and scientific collaboration in the early stages of the pandemic. More specifically, our results indicate precarious overload of the standard publication systems, significant problems with data availability and apparent deficient collaboration. Conclusion: In conclusion, we believe the scientific community could have used the data more efficiently in order to create proper foundations for finding new solutions for the COVID-19 pandemic. Moreover, we believe we can learn from this on the go and adopt open science principles and a more mindful approach to COVID-19-related data to accelerate the discovery of more efficient solutions. We take this opportunity to invite our colleagues to contribute to this global scientific collaboration by publishing their findings with maximal transparency.

Based on the total scholarly article output of Norway, we investigated the coverage and degree of openness according to three bibliographic services 1) Google Scholar, 2) oaDOI by Impact Story and 3) 1findr by 1science. According to Google Scholar, we find that more than 70% of all Norwegian articles are openly available. However, degrees are profoundly lower according to oaDOI and 1findr, respectively 31% and 52%. Varying degrees are mainly caused by different interpretations of openness, with oaDOI being most restrictive. Furthermore, open shares vary considerably by discipline, with the Medcine and Health sciences at the upper and the Humanities at the lower end. We also determined the citation frequencies using Cited-by values as of Google Scholar, applying year and subject normalization. We find a significant citation advantage for open articles. However, this is not the case for all types of openness. In fact, the category Open Access journals was by far lowest cited, indicating that young journals with a declared open access policy still lack recognition.

The commercial equipment that carries out the measurement of temperature has a high cost. Therefore, this article describes the development of a temperature measurement equipment, which uses a microcontrolled platform, responsible for managing the data of the collected temperature signals and making available the acquired information, so that they can be verified in real time at the measurement site, or remotely. The construction of the temperature measurement equipment was performed using open platform hardware / software, where performance tests were carried out with the objective of developing a temperature measurement equipment that has measurement quality and low cost.

Dump design and scheduling are critical elements to effective mine planning, especially if several of them are required in large-scale open pit mines. Infrastructure capital and transportation costs are considerable from an early stage in the mining project, and through the life-of-mine as these dumps gradually become immense structures. Delivered mining rates, as well as certain spatial and physical constraints, provide a set of parameters of mathematical and economic relationship that creates opportunities for modelling and thus facilitates the measuring and optimization of ultimate dump design by using programming and empirical techniques while achieving economic objectives. This paper presents a methodology to model and optimize the design of a mine dump by minimizing the total haulage costs. The proposed methodology consists on: (i) Formulation of a dump model based on a system of equations relying on multiple relevant parameters; (ii) Solves by minimizing the total cost using linear programming and determines a ‘preliminary’ dump design; (iii) Through a series of iterations, modifies the ‘preliminary’ footprint by projecting it to the topography and creates the ultimate dump design. Finally, an example application for a waste rock dump illustrates this methodology.

Open Education, Open Educational Practices (OEP), and Open Educational Resources (OER) have emerged as significant opportunities for enhancing global sustainability information sharing. However, the creation and sharing of OER, as well as the usage of OEP in Higher Education for Sustainable Development (HESD), remain limited. This study explores the implementation of OEP in HESD, aiming to empower students to co-produce OER on Sustainable Development (SD). This study, drawing on the theoretical approach of the principle of constructive alignment, proposes the development of students’ digital competence in OER production. A two-group pre-test post-test analysis of 409 students (Psychology, Economics, Education, Geography) reveals a significant increase in digital competence over time among students who produced OER on SD, compared to their peers enrolled in courses unrelated to OER content development. We delve into the practical implications for designing OEP in HESD and strategize to support students in their OER production processes.

In this paper, we introduce a new class of open sets that is called is*-open set . Also, we present the notion of is*-continuous, is*-open, is*-irresolute, is*-totally continuous, and is-contra-continuous mappings, and we investigate some properties of these mappings. Furthermore, we introduce some is*-separation axioms, and is*-mappings are related with is*-separation axioms. . .

This article focuses on the issue of urban development of cities and their residential development from the perspective of spatial planning. Spatial planning fundamentally determines, what kind of construction is feasible in cities. However, spatial plans often do not consider spatial limits, which often go against the proposed ways of using of the given sites, or make their use fundamentally difficult, for example by disproportionately increasing of the costs of residential construction, when it is necessary to remediate old burdens in the defined locality. The subject of the presented research was to examine the possibility of establishing an Index of Residential Development (IoRD), which evaluates the possibilities of residential development in the territory of urban agglomerations. The aim of the research, in the form of establishing of an Index of Residential Development (IoRD), was to assess, how it is possible to consider spatial limits associated with residential construction in urban intravilanes in order to identify the objectives of further spatial development planned by cities. Subsequently, the partial aim of the research was also to create a usable tool for support in the decision making of development organizations on the location of their project in a given space. Based on the results of the research, it was deduced that the limits associated with the residential development in intravilanes based on the IoRD could be considered. Clear links were also shown between the limits in the territory and the impaired possibility of construction in cities with zoning plans, which did not respond to the limits in the territory by adding other design zones, or completely ignored them. Although the methodology for determining of the Index of Residential Development (IoRD) was verified due to the availability of data in the case study carried out in the Czech Republic – the city of Brno, the methodology is applicable to any urban agglomeration even outside the Czech Republic when fulfilling the conditions defined in the article.

Access to good nutritional health is one of the principal objectives of current society. Several e-services offer dietary advice. However, multifactorial and more individualized nutritional recommendations should be developed to recommend healthy menus according to the specific user's needs. In this article we present and validate a personalized nutrition system based on an application (APP) for smart devices with the capacity to offer an adaptable menu to the user. The APP was developed following a structured recommendation generation scheme, where the characteristics of the menus of 20 users were evaluated. Specific menus were generated for each user based on their preferences and nutritional requirements. These menus were evaluated by comparing their nutritional content versus the nutrient composition retrieved from dietary records. The generated menus showed great similarity to those obtained from the user dietary records. Furthermore, the generated menus showed less variability in micronutrient amounts and higher concentrations than the menus from the user records. The macronutrient deviations were also corrected in the generated menus, offering a better adaptation to the users. The presented system is a good tool for the generation of menus that are adapted to the user characteristics and a starting point to nutritional interventions.

A national green planning strategy has recently been introduced in the Italian urban planning sector, aimed at making all local initiatives undertaken nationwide consistent with each other. At a regional level, Friuli Venezia-Giulia has recently implemented a Landscaping Plan, which is of an urban planning and ecological nature at an intermediate level between national and local. This article describes the local green plan of Latisana, which has been entitled Ecopolitana, given that it is represents the experimental phase, at a regional level, of the possibilities offered by landscape planning and design. Specifically, it outlines the multi-disciplinary approach used, demonstrating how landscape planning can be compared to the sustainable development of cities, with specific regard to the agricultural sector. Regarding the agricultural sector, a low-intensity cropping model is also suggested, based on the principles of agroecology and landscape ecology, which has already been implemented in the historical rural landscape of Plasencis (UD) and developed through GIS analysis and remote sensing processes. Its aim is to be the starting point for the achievement of the goals set in the 2030 Agenda, and especially Goals 13 (Climate action) and 15 (Life on land), given the current scarcity of agroecological infrastructures in the area of Latisana (UD) and the high percentage of soil used for intensive cropping.

Patients with chronic obstructive pulmonary disease (COPD) may require frequent hospitalization due to worsening symptoms. Preventing prolonged hospital stay and readmission becomes a challenge for healthcare professionals treating patients with COPD. Although the integration of health and social care supports greater collaboration and enhanced patient care, organisational structure and poor leadership may hinder the implementation of patient-oriented goals. This paper presents a case of a 64-years-old chronic smoker with severe COPD who was to be discharged on long-term oxygen therapy (LTOT). It further highlights the healthcare decisions made to ensure the patient’s safety at home, and further provide a long-lasting solution to the existing medical and social needs. The goal was accomplished through a discharge plan that reflects multidisciplinary working, efficient leadership and change management using Havelock’s theory. While COPD is characterized by frequent exacerbation and hospital readmission, it was emphasized that most failed discharge could be attributed to bureaucratic organizational workflow which might not be in the patient’s best interest. It was further demonstrated that healthcare professionals are likely to miss the window of opportunity to apply innovative and long-lasting solutions to the patient’s health condition in an attempt to remedy the immediate symptoms of COPD.

Metazoans have an elaborate and functionally segmented body. It evolves from a single cell by systematic divisions. Metazoans attain structural complexity with exquisite precision, which is a molecular mystery. The indispensable role of centrioles in cell division and ciliogenesis can shed insight into this riddle. Cell division helps in growth of the body and is a highly regulated and integrated process. Its errors cause malignancies. The cell mass is organized during organogenesis. Prior to it, the centrioles are retrieved from the cell cycle to initiate ciliogenesis. The cilia-modulated developmental signaling pathways elaborate the body plan. The secluded compartment of the cilium reduces noise during signaling and is essential for a precise body plan development. The dysfunctional centrioles and cilia can distort body plan. Thus, centriole has a dual role in growth and cellular organization. This concept review analyses the comprehensive interactome and the key domain features (like C2 domain) of molecules which connect and disarm the centriole from the cell cycle and ciliogenesis by switching on or off the essential regulators of the pathways. The concentration of these signaling pathways at the centriole reinforces the hypothesis that centriole is the molecular workstation to carve out structural design and complexity in metazoans.

Free and open source hardware (FOSH) development has been shown to increase innovation and reduce economic costs. This article reviews the opportunity to use FOSH like a sanction to undercut imports and exports from a target criminal country. A formal methodology is presented for selecting strategic national investments in FOSH development to improve both national security and global safety. In this methodology, first the target country that is threatening national security or safety is identified. Next, the top imports from the target country as well as potentially other importing countries (allies) are quantified. Hardware is identified that could undercut imports/exports from the target country. Finally, methods to support the FOSH development are enumerated to support production in a commons-based peer production strategy. To demonstrate how this theoretical method works in practice it is applied as a case study to the current criminal military aggressor nation, who is also a fossil fuel exporter. The results show there are numerous existing FOSH and opportunities to develop new FOSH for energy conservation and renewable energy to reduce fossil fuel energy demand. Widespread deployment would reduce the concomitant pollution, human health impacts, and environmental desecration as well as cut financing of military operations.

Vacuum drying can dehydrate materials further than dry heat methods while protecting sensitive materials from thermal degradation. Many industries have shifted to vacuum drying as cost- or time-saving measures. Small-scale vacuum drying, however, has been limited by high costs of specialty scientific tools. To make vacuum drying more accessible, this study provides design and performance information for a small-scale open source vacuum oven, which can be fabricated from off-the-shelf and 3-D printed components. The oven is tested for drying speed and effective-ness on both waste plastic polyethylene terephthalate (PET) and a consortium of bacteria developed for bioprocessing of terephthalate wastes to assist in distributed recycling of PET for both additive manufacturing as well as potential food. Both materials can be damaged when exposed to high temperatures, making vacuum drying a desirable solution. The results showed the open source vacuum oven was effective at drying both plastic and biomaterials, drying at a higher rate than a hot-air dryer for small samples or for low volumes of water. The system can be constructed for less than 20% of commercial vacuum dryer costs for several laboratory-scale applications including dehydration of bio-organisms, drying plastic for distributed recycling and additive manufacturing, and chemical processing.

One of the most important pieces of equipment used in labs in culturing populations of fruit flies (Drosophila sp.) is that of the “CO₂ gas plate”, which is used to anesthesize individuals during “fly-pushing”. This piece of equipment consists of a box with a porous top into which carbon-dioxide is pumped. Flies placed on its surface are left immobilized, permitting the sorting, categorizing and/or counting of flies during population culturing and experimental assays. Unfortunately, commercially available gas plates are typically expensive. Here, we describe a new design for a gas plate that can be easily produced using a 3D printer and a laser cutter, which we are making freely available to the fly community.

This paper extends our seminal paper on KnoBAB for efficient Conformance Checking computations performed on top of a customised relational model. After defining our proposed temporal algebra for temporal queries (xtLTLf ), we show that this can express existing temporal languages over finite and non-empty traces such as LTLf . This paper also proposes a parallelisation strategy for such queries thus reducing conformance checking into an embarrassingly parallel problem leading to super-linear speed up. This paper also presents how a single xtLTLf operator (or even entire sub-expressions) might be efficiently implemented via different algorithms thus paving the way to future algorithmic improvements. Finally, our benchmarks remark that our proposed implementation of xtLTLf (KnoBAB) outperforms state-of-the-art conformance checking software running on LTLf logic, be it data or dateless.

This is a paper on Political Economic and Economic Policies into the European Green Deal framework and the Spanish recovery plan, with special attention to the tourism sector. First, there is a literature review, combining the scientific production with professional and institutional literature, to understand the topic development, from the former restrictive point to the current view at large. Second, it is offered a case study about the green jobs opportunity, according to wellbeing economics, for the Spanish tourism sector renewal. The paper provides valuable information to improve sectorial recovery plan, to coordinate the policymakers and the business managers and entrepreneurs.

Open-vocabulary learning has recently gained prominence as a means to enable image segmentation for arbitrary categories based on textual descriptions. This advancement has extended the applicability of segmentation systems to a broader range of generally purpose scenarios. However, current methods often revolve around specialized architectures and parameters tailored to specific segmentation tasks, resulting in a fragmented landscape of segmentation models. In response to these challenges, we introduce OVAMTSeg, a versatile framework designed for Open-Vocabulary and Multitask Image Segmentation. OVAMTSeg harnesses adaptive prompt learning to empower the model to capture category-sensitive concepts, enhancing its robustness across diverse multi-task and scenario contexts. Text prompts are employed to effectively capture semantic and contextual features of the text, while cross-attention and cross-modal interactions enable the fusion of image and text features. Furthermore, a transformer-based decoder is incorporated for dense prediction. Extensive experimental results underscore the effectiveness of OVAMTSeg, showcasing its state-of-the-art performance and superior generalization capabilities across three segmentation tasks. Notable achievements include a 47.5 mIoU in referring expression segmentation, 51.6 mIoU on Pascal-VOC with four unseen classes, 46.6 mIoU on Pascal-Context in zero-shot segmentation, 65.9 mIoU on Pascal-5i, and 35.7 mIoU on COCO-20i datasets for one-shot segmentation.

Badminton is one of the most popular racket sports played by children up to the elderly worldwide. Everyone can practice and play badminton as a leisure or competitive sport, regardless of age, experience, or skill level. It does not require physical contact among players and expensive equipment. Compared with closed-skill exercise (e.g., running, swimming), open-skill exercise (e.g., badminton, table tennis) has been reported to intervene more with cognitive function and prevent cognitive decline. In this review, we outline the characteristics of badminton’s beneficial effects on physical and cognitive aspects. The characteristics presented here indicate that intervention with regular badminton exercise could effectively improve cognitive function and prevent cognitive decline in the elderly.

Participating in collaborative scientific research through citizen science, a component of open science holds significance for both citizen scientists and professional researchers. Yet, the ad-vantages for those orchestrating citizen science initiatives are often overlooked. Organizers en-compass a diverse range, including governmental entities, non-governmental organizations, corporations, universities, and institutions like libraries. For libraries, citizen science holds im-portance by fostering heightened civic and research interests, promoting scientific publishing, and contributing to overall scientific progress. This paper aims to provide a comprehensive understanding of the specific ways in which citizen science can benefit libraries and how libraries can effectively utilize citizen science to achieve their goals. The paper is based on a systematic review of peer-reviewed articles that discuss the direct benefits of citizen science on libraries. A list of the main benefits of citizen science for libraries has been compiled from the literature. Additionally, the reasons why it is crucial for libraries to communicate the benefits of citizen science for their operations have been highlighted, particu-larly in terms of encouraging other libraries to actively engage in citizen science projects.

The need for cross-modal retrieval (CMR) among users is growing because of the swift advancements in computer vision and natural language processing. Promoting home operating systems is greatly aided by the openKylin home operating system. It is focused on enhancing the functionality of the operating system with safe and dependable operating technologies. Practical implications abound for integrating computer vision research into home operating systems. A multimodal retrieval approach based on openKylin is presented to improve the usability of text search graphs, audio, and video. The overview of pertinent domestic and international research is the main topic of this article. This technological advancement. It then offers details on the design, implementation procedure, and final implementation outcomes for demonstration. The works of natural operations show that this strategy has excellent accuracy and performance.