Non-timber forest Products (NTFPs) are a broad category of natural resources harvested from forests that do not involve cutting down trees for their wood or timber. NTFPs play a vital role in the livelihoods and economies of many rural communities, particularly in forest-dependent regions. Despite the benefits obtained from NTFPS, little is known about its potential to alleviate poverty in the local communities. The objective of this review is to comprehensively assess the potential of NTFP's contribution to poverty reduction within forest fringe communities. The study employed the systematic review method to delve into the multifaceted relationship between NTFPs and poverty alleviation. We followed the preferred reporting items for systematic reviews and meta-analyses protocol (PRISM-P). In all, 58 research articles were reviewed. The results indicated that NTFPs hold significant promise as a tool for poverty alleviation. Globally, NTFPs have the potential to alleviate poverty and increase household incomes between 19% and 78% within forest fringe rural communities. In addition, the review indicated that countries in Africa and Asia depend highly on NTFPs and provide substantial amounts of income to the locals. However, the potential for NTFPs to reduce poverty is not uniform. It is highly contingent upon local ecological conditions, market accessibility, community involvement, and supporting policies and interventions. In conclusion, this systematic review demonstrates that NTFPs have a substantial role in poverty alleviation. This study underscores the need for continued research and targeted development initiatives to unlock the vast potential of NTFPs in addressing poverty challenges.

The construction industry has a notable negative impact on the environment; thus, the promotion of the use of timber structures is an alternative to mitigate its effects. The research develops an artificial intelligence-based decision approach in the calculation of timber structures focused on the enhancement of the sustainability of roof structures. Based on the optimization carried out through genetic algorithms and the framework established in Eurocode 5, a general set of equations has been proposed for a laminated timber roof structure. The tool, which determines the most suitable roof structure for each strength class of laminated timber, allows for the determination of the dimensions of beams and purlins and their respective separations in order to minimize wood consumption. The ultimate goal is to offer multiple solutions regarding strength classes and structural designs in order to foster informed sustainable choices that promote efficient use of resources in construction.

The overwhelming evidence supports the assertion that the climate is undergoing change. Understanding the perception of locals of the magnitude of climate change and its influence on non-timber forest products (NTFPs) challenge at a global scale. Although studies on climate change, value addition, and the multiple uses of NTFPs and their impact on local livelihoods have been conducted, locals' perceptions of these factors have not been fully explored. This study aims to assess various social factors, including education, gender, and religion, and their influence on locals' perceptions of the abovementioned factors. The research focused on five regions where NTFPs are prevalent in Ghana (Western North, Bono, Ahafo, Ashanti, and Eastern regions). To investigate the impact of social factors on local perceptions of climate change, value addition, and the multiple values of NTFPs within rural communities, a total of 732 interviews with a team of interviewers across these five regions in Ghana were carried out. We applied a logistic regression model to assess the social factors and their influencing locals’ perceptions of the mentioned variables. It was revealed that age, gender, education, and occupation did not significantly influence locals' perceptions of climate change. However, religion was found to influence locals' perceptions of climate change. Furthermore, the results demonstrated that gender (P<0.000328) and education (P<0.00426) strongly influenced locals' perceptions of value addition to NTFPs. In contrast, religion and constraints (related to time, finance, and skills) did not significantly influence locals' perceptions. Additionally, it was observed that gender (0.00132), education (0.00692), and religion (8.12e-05) significantly influenced how locals perceive and use NTFPs. In conclusion, this study provides valuable insights into the intricate interplay among local perceptions, climate change, value addition, multiple uses of NTFPs, and the capacity of NTFPs to enhance the well-being of forest fringe communities. These findings underscore the importance of comprehensive, tailor-made interventions that consider local perspectives and adhere to sustainable approaches, with the aim of optimising the positive impacts of NTFPs in poverty alleviation and overall community development.

The overexploitation of forest resources in the charcoal production basin of the city of Lubum-bashi (DR Congo) is reducing the resilience of miombo woodlands and threatening the survival of the riparian as well as urban human populations that depend on it. We assessed the socio-economic value and availability of plant-based non-timber forest products NTFPs in the rural area of Lubumbashi through ethnobotanical (100 respondents) and socio-economic (90 respondents) interviews, supplemented with floristic inventories, in two village areas selected on the basis of the level of forest degradation. The results show that 60 woody species, including 46 in the degraded forest (Maksem) and 53 in the intact forest (Mwawa), belonging to 22 families are used as sources of NTFPs in both villages. Among these species, 25 are considered priority species. NTFPs are collected for various purposes, including handcrafting, hut building, and traditional medicine. Moreover, the ethnobotanical lists reveal a similarity of almost 75%, indicating that both local communities surveyed use the same species for collecting plant-based NTFPs, despite differences in the level of degradation of the miombo woodlands in the two corresponding study areas. However, the plant-based NTFPs that are collected from miombo woodlands and traded in the urban markets have significant economic value, which ranges from 0.5 to 14.58 USD per kg depending on the species and uses. NTFPs used for handicraft purposes have a higher economic value than those used for other purposes. However, the sustainability of this activity is threatened due to unsustainable harvesting practices that include stem slashing, root digging, and bark peeling of woody species. Consequently, there is a low availability of plant-based NTFPs, particularly in the village area where forest degradation is more advanced. It is imperative that policies for monitoring and regulation of harvesting, and promoting sustainable management of communities’ plant-based NTFPs priority, be undertaken to maintain their resilience.

Globally, non-timber forest products (NTFPs) continue to contribute vastly to addressing the food, poverty reduction, income, and livelihood requirements of people in rural areas. However, as at now, there is no specific existing data highlighting periodic contributions of NTFPs to the economy of the Eastern region and the country. The study analyses the contribution of NTFPs towards economic development in the Eastern region and the achievement of SDGs in Ghana. Through Focus Group Discussions and qualitative analysis, it was concluded that NTFPs contribute immensely towards the economic development of the Eastern region and the country through employment and direct taxes. Ultimately, it is evident from the study that the destruction of the Atiwa forest reserve for the purpose of bauxite mining will widely hinder the country’s achievement of the SDGs. Also, the study found out that residents will continue to exploit forest resources if the core concerns of institutional deficiencies and rural poverty are not addressed. To curb this situation, there should be sustainable, regulated, and authorized harvesting of NTFPs/NWFPs, community/user empowerment, sectoral education and training programmes, etc. Even though these are common solutions, the study found them extremely rare in the study area.

Achieving sustainable management of forests in China is becoming increasingly important with more awareness and realization of the importance of forests in environmental protection. Forest certification, a market-based instrument to promote sustainable forest management, has been recognized by many countries including China. While landowners’ perception and perspective regarding this voluntary program have been well-documented in literature, how to motivate and incentivize landowners to participate in forest certification remained under-studied questions. With the face-to-face survey of landowners in Shandong, China, this study analyzed landowners’ willingness to accept compensation for participating in forest certification. Results indicated that landowners average accepted compensation, in terms of increased timber price, was about RMB120 (~$17.2)/m3 to have their forests certified. Results from multiple regression showed that the level of such compensation required for certification adoption was influenced by ownership size, owners’ demographics, certification program requirements, as well as importance placed on timber sale. These findings would inform policy-makers in designing compensation-related polices and establish incentive-based mechanisms to motivate landowners participate in forest certification programs in China.

Secondary transportation of raw and comminuted forest products is a major component in forest harvesting operations in terms of economics, public perception, and safety. Consequently, there is a substantial amount of literature on this topic. The existing literature has dealt with many of the technical aspects of transportation with a majority of them focusing on improving supply chain issues; However, there are only few specific to secondary transportation issues in general. This annotated bibliography will help practitioners, researchers, and stakeholders gain a better understanding of the existing literature from 2000 to 2015. To this end, we began by classifying the selected literature into six themes: cost, roads and routes, trucking, efficiency & safety, other modes of transportation, and supply chain & optimization. Woody biomass for bioenergy production was the most researched forest product with respect to transportation. About one-third of the articles were presented in the context of supply chain modeling and optimization. More than half of the studies originated from Europe while the United States had the most publications for any given country. The most articles (16) were published in 2013. Biomass and Bioenergy published the highest number of articles (29) during the timeframe.

The current paper has examined the effect of both export product diversification and poverty on non-resource tax revenue in developing countries. The analysis has used an unbalanced panel dataset of 111 countries over the period 1980-2014. Based on the Blundell and Bond two-step system Generalized Methods of Moments technique, the empirical analysis has shown interesting findings. Export product concentration and poverty influence negatively non-resource tax revenue over the full sample, but this effect varies across countries in the sample. Furthermore, the effect of export product diversification on non-resource tax revenue performance depends on the level of poverty. It appears that export product diversification influences positively non-resource tax revenue performance in countries that experience lower poverty rates. From a policy perspective, these findings show that policies in favour of diversifying export product baskets and reducing poverty would contribute to enhancing non-resource tax revenue performance in developing countries.

Scator set, introduced by Fernández-Guasti and Zaldívar, is endowed with a very peculiar non-distributive product. In this paper we consider the scator space of dimension $1+2$ and the so called fundamental embedding which maps the subset of scators with non-zero scalar component into 4-dimensional space endowed with a natural distributive product. The original definition of the scator product is induced in a straightforward way. Moreove, we propose an extension of the scator product on the whole scator space, including scators with vanishing scalar component.

In ancient buildings, timber members could need specific on-site interventions, including reinforcement or repair, sometimes inserting of reinforcing material into grooves routed in the original sound wood. Grooves number, positions and dimensions, and strengthening materials may differ, according to the desired increase of bending stiffness and strength. The Modulus-of-Elasticity (MOE) of each beam is of key importance, but the incisions can affect it, net of the reduction of the removed wood. In this study 12 old beams were accurately measured and their static and dynamic MOEs calculated before and after the grooves processing, to simulate the operations of typical reinforcing interventions. One groove was routed along the length of each beam and deepened progressively by three steps. Tests have showed how the MOE is affected by the groove depth, decreasing up to one third. The paper proves how the weakening effect of grooves on-site can be assessed with dynamic MOE and roughly predicted by means of visual survey. Grooves need for strengthening beams, must be carefully evaluated because of the variation of the actual mechanical properties, net to lost wood.

We present a new method of estimating fitness of countries and complexity of products by exploiting a non-linear non-homogeneous map applied to the publicly available information on the goods exported by a country. The non homogeneous terms guarantee both convergence and stability. After a suitable rescaling of the relevant quantities, the non homogeneous terms are eventually set to zero so that this new method is parameter free. This new map reproduces the findings of the method proposed by Tacchella et al. [1], and allows for an approximate analytic solution in case of actual binarized matrices based on the Revealed Comparative Advantage (RCA) indicator. This solution is connected with a new quantity describing the neighborhood of nodes in bipartite graphs, representing in this work the relations between countries and exported products. Moreover, we define the new indicator of country net-efficiency quantifying how a country efficiently invests in capabilities able to generate innovative complex high quality products. Eventually, we demonstrate analytically the local convergence of the algorithm.

The objective of the present work was to determine the productivity and costs of timber harvesting and skidding during the first commercial thinning of a Scots pine stand. The analyzed harvesting set consisted of a mini-excavator (34 kW) with an stroke harvester head (gripping range: 4–30 cm), and a farm tractor coupled to an logging trailer with a hydraulic crane. Merchantable timber (roundwood with a minimum diameter of 5 cm inside bark) was harvested from a 25-year old planted Scots pine stand growing on a grid of 1.4×1.8 m. The study showed the productivity of the mini-harvester range from 3.09 to 3.47 m3∙PMH15 -1, and that of the forwarding set to be 4.07 m3∙PMH15 -1. The analyzed model of productivity as a function of individual tree volume and thinning intensity was statistically significant, but the intensity parameter was significant only on plots located along wide access trails (3.7 m) and insignificant on plots located along the narrow access trial (2.5m). The intertree distance was not found to be significant. The calculated net machine costs for the forwarding set and mini-harvester were 36.12 Euro∙PMH 1 and 52.47 Euro∙PMH-1, respectively. An increase in the utilization rate of the harvesting set to 80% would reduce the timber harvesting and skidding costs to 22.07 Euro∙m-3.

Non-woody forest products play a vital role in the economic uplifts of the local communities living in forest areas. This study was conducted in the Shishikoh Valley, district Chital to identify the economic importance of the Chilghoza nuts. The study was based on interviews and questionnaires, and a total of 50 questionnaires were collected from the whole valley. The results showed that before 2003, the people were unaware of the high economic value of the Chilghoza nuts, they used to sell the Chilghoza nuts at a very low price (US$ 1.7 to 2.4 per bag: approximately 5 Kg) and harvest it for fuelwood purposes. After the IPRP interventions, training and awareness, the local people started conservation of Chilghoza trees and sustainable cone harvesting. The total collection and sell out of Chilghoza nuts in the Shishikoh valley jumped to 87.9 tons and US$ 7.64/kg in 2005 from 32.7 tons and US$ 0.34-0.48/kg, respectively. This study concludes that IPRP interventions improved the economic values of Chilghoza nuts as well as the living standards of the local people.

Forest community connections are crucial to ensure forest stewardship and sustainability. We explored the potential of mushrooming to enable such connections in contexts where these connections have been historically broken, alienating local people from forests. Taking the case of the recent devolution of a community forest (baldios) in central Portugal to the local population, we present a five-year pilot project to rework mycology from a mushroom-centered approach to a mushroom-in-baldios approach. Mushrooms were used as an entry-point to connect the forest ecology with the challenges of governance and community building. The devised activities provided an opportunity for people inside and outside the local community to adventure into the woods and find out more about their socio-ecological history, develop communal and convivial relationships and engage in the responsible gathering of wild mushrooms. However, the hosting of mushroomers to know, value and engage with the community forest recovery has constantly working against the enclosure of mushrooms to provide marketable forms of leisure. The outcome of these activities depends on the relationships established between mushrooms, mycologists, local administrators, commoners and poachers, all operating within a framework that favors the eradication of resources instead of long-term relationships that sustain places.

Polarimetric Synthetic Aperture Radar (PolSAR) images with dual polarization modes have great potential to map FSV by excellent penetration capabilities and distinct microwave scattering processes. However, the response of these SAR data to FSV is still uncertain at non-growing season. To further interpret the response of forest FSV to these dual-polarization SAR images, three types of dual polarization SAR images (GF-3, Sentinel-1, and ALOS-2) were initially acquired in coniferous planted forest at non-growing season. Then, sensitivity between FSV and all alternative features extracted from each type of SAR images were analyzed to express the difference of bands and polarization modes in deciduous (Larch) and evergreen (Chinese pine) forests. Finally, mapped FSVs using single and combined dual polarization images were derived by optimal feature sets and four machine learning models, respectively. The combined effects were also analyzed to clarify the response of FSV to dual polarization SAR images with bands and polarization modes at non-growing season. The results demonstrated that the difference of backscattering energy from different sensors is significant in Chinese pine forests, and the difference is gradually reduced in Larch forests. it is also implied that polarization mode is more important than penetration capability in mapping forest FSV in deciduous forest at non-growing season. By comparing the accuracy of mapped FSV using single and combined images, combined images have more capability to improve the accuracy and reliability of mapped FSV. Meanwhile, it is also confirmed that compensation effect with bands and polarization modes not only have great potential to delay the saturation phenomenon, but also have capability to reduce errors caused by over-estimation.

The present study compared the contralateral suppression and the amplitude of distortion product otoacoutsic emissions (DPOAEs) between smokers and non-smokers to determine the influence of smoking. Thirty smokers and thirty non-smokers within the age range of 18-40 years with a normal hearing sensitivity were considered for the study. For both the groups, DPOAEs were measured and the efferent auditory system functioning was measured by presenting the white noise of 50 dB HL to the contralateral side, while recording the DPOAEs. There was no significant effect of age on the amplitude of DPOAEs in both the groups. However, there were significant differences in the amplitude of DPOAEs between smokers and non-smokers. The amount of suppression and DPOAE amplitude were reduced in smokers when compared to non-smokers. The study found no significant correlation between the amount of smoking and amount of suppression between smokers and non-smokers. However, there were significant correlations between the amount of smoking and DPOAE at low and mid frequencies between smokers and non-smokers. Therefore, the present study highlights the increased damage to the efferent auditory system risk and the smoking ill-effects on the efferent auditory system.

Philip Morris International (PMI) has developed the Population Health Impact Model (PHIM) to quantify, in the absence of epidemiological data, the effects of marketing a candidate modified risk tobacco product (cMRTP) on the public health of a whole population. Various simulations were performed to understand the harm reduction impact on the U.S. population over a 20-year period under various scenarios. The overall reduction in smoking attributable deaths (SAD) over the 20-year period was estimated as 934,947 if smoking completely went away and between 516,944 and 780,433 if cMRTP use completely replaces smoking. The reduction in SADs was estimated as 172,458 for the World Health Organization (WHO) 2025 Target and between 70,274 and 90,155 for the gradual cMRTP uptake. Combining the scenarios (WHO 2025 Target and cMRTP uptake), the reductions were between 256,453 and 268,796, depending on the cMRTP effective dose. These results show how a cMRTP can reduce overall population harm additionally to existing tobacco control efforts.

In food industry, there is a growing demand for cost-effective methods for inline inspection of food items able to non-invasively detect small foreign bodies which may have contaminated the product during the production process. Microwave imaging may be a valid alternative to the existing technologies, thanks to its inherently low-cost and its capability of sensing low-density contaminants. In this paper, a low-complexity microwave imaging system specifically designed to enable the inspection of a large variety of food products is presented. The system consists of two Circularly Loaded Antipodal Vivaldi Antennas, having a very large operative band, from 1 to 15 GHz, thus allowing a suitable spatial resolution for different food products from mostly fatty to high water-content ones. The antennas are arranged in such a way to collect the signal useful to exploit a recently proposed real-time microwave imaging strategy, leveraging the inherent symmetries usually characterizing food items. The system is experimentally characterized, and the achieved results compare favorably with the design specifications and the numerical simulations. Relying on these positive results, a first experimental proof of the effectiveness of the whole system is presented, which confirms its efficacy.

Since the introduction of Cross-laminated Timber (CLT) in Austria in the early 1990s, the adoption of this 90°-crosswise-laminated product has seen exponential growth worldwide. Compared to traditional laminated timber products (e.g. glulam), CLT provides improved dimensional stability, but with reduced out-of-plane bending stiffness. To improve the bending stiffness, while maintaining relative dimensional stability, a modified orientation of the inner layers in a diagonal direction can be used. This novel product is Diagonal-Cross-laminated Timber (DCLT), a composite timber product, consisting of inner layers which are rotated at different angle-ply orientations between 0 and 90 degrees to the outer layers. To properly model the out-of-plane bending behavior of the DCLT, analytical models and Finite Element Analysis (FEA) were used and the results were validated by third-point bending tests performed on DCLT panels with angle-ply orientations of 10°, 20°, 40°, 70°, and a conventional CLT 90° panel. The results indicate that DCLT panels with angle-ply cross-layers have a structural advantage in out-of-plane bending over traditional CLT (90°) panels. The development of DCLT and its introduction to the industry could enable the use of lower-quality timber that would not otherwise satisfy structural requirements for CLT.

Regular regimes of oil and oil products pipelines are studied. The problem is to develop an algorithm of effective pipeline system control that ensures the fulfillment of specified boundary conditions at the system boundaries. The product is pumped in batches, the flow is characterized by a change in temperature and pressure flow parameters over time. The developed solution method uses the principle of decomposition in the sense that each computational iteration is im-plemented in 3 stages, in three nested loops. The inner cycle is connected with the material bal-ance relations, at the next cycle the flow equations are introduced and the fulfillment of the 2nd Kirchhoff's law is monitored. If the flow process is significantly affected by temperature, then an external cycle is also implemented, correcting the solution so that the energy conservation equa-tion is satisfied. In the calculation procedure, some computational difficulties may arise, which consist in choosing an appropriate optimization method. On a specific example, the possibility of using various library programs to solve the problem was checked. The developed method is suita-ble for the analysis of systems of arbitrary topology. Since the method is not time-consuming, it can be recommended for online control of oil and oil products supply systems. The paper opens a new direction in the theory of hydraulic circuits. It uses both traditional methods of continuum mechanics and stochastic models.

Simulating the non-perturbative and non-Markovian dynamics of open quantum systems is a very challenging many body problem, due to the need to evolve both the system and its environments on an equal footing. Tensor network and matrix product states (MPS) have emerged as powerful tools for open system models, but the numerical resources required to treat finite temperature environments grow extremely rapidly and limit their applications. In this study we use time-dependent variational evolution of MPS to expore the striking theory of Tamescelli et al. that shows how finite temperture open dyanmics can be obtained from zero temperature, i.e. pure wave function, simulations. Using this approach, we produce a benchmark data set for the dynamics of the Ohmic spin-boson model across a wide range of coupling and temperatures, and also present detailed analysis of the numerical costs of simulating non-equilibrium steady states, such as those emerging from the non-perturbative coupling of a qubit to baths at different temperatures. Despite ever growing resource requirements, we find that converged non-perturbative results can be obtained, and we discuss a number of recent ideas and numerical techniques that should allow wide application of MPS to complex open quantum systems.

Composite timber-concrete constructions are innovative structural systems which have become the subject of research and practical usage, primarily due to their attractive mechanical properties. This article deals with the experimental procedure and the analysis of the mechanical behavior of two different serious of timber-concrete composite beams. In the composite beams of the A series, screws were used as a fastening system in the interlayer between the timber and concrete parts, whereas in the B type series, a more complex system, the combination of notches and screws, was used for the same purpose. Both series were exposed to loading up to a fracture point by the means of the standard procedure (four point bending test). The mechanical behavior of the A and B-series beams was analyzed by a comparative analysis referring to: the correlation of the fracture loading and the deflection at the moment of fracture, forms and mechanisms of fracture, the development of dilatations at certain points of specific cross-sections, the displacement in the timber-concrete interlayer in the support zones, the value of shear stresses and the calculated values of the effective bending stiffness of the beams. The B-series beams where a more complex fastening system, as it was expected, showed a better mechanical behavior than the A-series beams.

Forest enterprise has been identified as a means of generating income among people; plays a vital role in enhancing the quality of life of forest-dependent people. Despite the opportunities timber marketing offers the people, the disparities in the income generation of the marketers in the Bodija sawn wood Market and the effect of socio-economic factors on income generation of the marketers is not well understood. This study was conducted to assess the socio-economic determinants of contributions of timber marketing to the income of timber merchants in Bodija sawn-wood Market. One hundred structured questionnaires were administered randomly in five zones of the sawn wood Market to obtain information on the socio-economic background of the sawn wood marketers and the contribution of timber trade to their incomes. The result indicated that 99.0% of the respondents were male while females constituted 1.00%. Seventy-five percent of the marketers had post-primary education and 25% had primary education. Two percent of the marketers had below 10 years of marketing experience, twenty-six percent had between 11 and 20 years, 57.00% had between 21 and 30 years, and 15.00% had more than 30years experience. Fifty-eight percent of the respondents earned between ₦10000-₦60000 (1US$ = 360.00) from timber marketing, thirty-one percent earned between ₦60001 and ₦110000, 7% earned between ₦110001 and ₦160000, while 4% earned above ₦160000 per month. Chi-square analysis of the socio-economic characteristics of the respondents and income generation at α level of 0.05 indicated that ethnicity (0.001) and years of experience (0.009) significantly influenced income while the level of education (0.101), age (0.122), and religion (0.745) had no significant influence on the incomes of marketers. Experience is an important factor in sawn wood marketing and a major determinant of the contribution of timber marketing to the income of timber marketers in Bodija sawn wood Market.

The present study aimed to evaluate the effect of the citric acid on the properties of solid pine wood, which were submitted to thermomechanical treatment. A preliminary test was performed in a previous study to evaluate the influence of different temperatures of pressing and concentrations of citric acid over the physical properties of wood. After choosing the best treatments (170°C and 5% and 10% of citric acid) it was evaluated the effect of these on the chemical properties (SEM, FTIR and pH), on the density profile using an X-ray microtomography, and on the resistance to ageing through abrasion test. The result of the chemical analysis allowed to observe an increase of the presence of ester functional groups, as well as a better coverage and higher acidity of the surface. The density profile technique allowed to observe the formation of peaks of density on the surface where the acid was applied. Lastly, it was also possible to verify an increase in the resistance to abrasion because of the application of the citric acid.

This review critically examines the various ways in which the mechanical properties of wood have been understood. Despite the immense global importance of wood in construction, most understanding of its elastic and inelastic properties is based on models developed for other materials. Such models neglect wood’s cellular and fibrous nature. This review thus questions how well models that were originally developed for homogeneous and effectively continuous materials can describe wood’s mechanical properties. For example, the elastic moduli of wood have been found by many authors to depend on the size of the test specimen. Such observations are incompatible with classical elasticity theory. There is also much uncertainty about how well elastic moduli can be defined for wood. An analysis of different models for size effects of various inelastic properties of wood shows that these models only approximate the observed behaviour, and do not predict or explain the scatter in the results. A more complete understanding of wood’s mechanical properties must take account of it being in some sense intermediate between a material and a structure.

The uptake of buildings employing cross-laminated timber (CLT) assemblies and designed to Passivhaus standard has accelerated internationally over the past two decades due to several factors including design responses to the climate crisis by decarbonising the building stock. Structural CLT technology and the voluntary Passivhaus certification both show measurable benefits in reducing energy consumption, while contributing to durability and indoor comfort. However, there is a general lack of evidence to support a fast uptake of these technologies in Australia. This paper responds to the compelling need of providing quantitative data and adoption strategies, it explores their combined application as a potential pathway for climate-appropriate design of energy-efficient and durable mass timber envelope solutions for subtropical and tropical Australian climates. Hygrothermal risk assessments of interstitial condensation and mould growth of CLT wall assemblies inform best-practice design of mass timber buildings in hot and humid climates. This research found that the durability of mass timber buildings located in hot and humid climates may benefit from implementing the Passivhaus standard to manage interior conditions. The findings also suggested that climate-specific design of the wall assembly is critical for mass timber buildings, in conjunction with excellent stormwater management practices during construction and corrosion protection for metallic fasteners.

This study investigates the effectiveness of a range of timber-based solutions for seismic and energy retrofitting of existing masonry buildings. These solutions are designed not only to prevent structural collapse during earthquakes but also to create integrated interventions that enhance thermo-physical performance and reduce emissions in existing buildings. Various case scenarios were considered and both mechanical and energetic behavior post-intervention were evaluated. Timber-engineered products serve as foundational components for the retrofit approach, encompassing one-dimensional vertical elements (strong-backs) and various types of panels (cross-laminated timber panels, laminated veneer lumber panels, and oriented strand board panels). The analyzed retrofit techniques share a common principle, involving the attachment of these timber-based elements to the building's wall surfaces through mechanical point-to-point connections. The proposed solutions integrate strong-backs and timber panels with membranes and insulation layers, yielding cohesive and highly effective interventions. Finite element modeling was employed to analyze the mechanical and thermal responses of the retrofitted walls. A comprehensive comparative analysis of various techniques was conducted to determine the most effective solution for each specific scenario.

Easter Island (Rapa Nui) deforestation has traditionally been viewed as a single event, synchronous in time and space across the island and caused by Polynesian settlers. However, recent studies have challenged this idea introducing the concept of spatio-temporal heterogeneity and suggesting a role for climate change. This paper presents a continuous paleovegetation record of the last millennium (~960 to ~1710 CE), based on palynological analysis of a peat core from Lake Kao. During this time interval, deforestation was gradual, with three main pulses at ~1070 CE, ~1410 CE and ~1600 CE, likely driven by drought, anthropogenic practices (mostly fire) or the coupling of both. Some forest regeneration trends have been documented after the first and the second deforestation pulses. Forests were totally removed by 1600 CE, coinciding with the full permanent human settlement of the Kao area. Comparison with other continuous palynological records available for the last millennium (Aroi marsh and Lake Raraku), confirms that forest clearing was heterogeneous in time and space, rather than synchronous island-wide.

This research raises questions about the possibilities and options of using BIM methodology for wood design and construction associated with software for structure modeling along the asset's cycle life. Likewise, several academic and research initiatives are reviewed. In this sense, this paper aims to establish an appropriate link between two agendas that the architecture, engineering, and construction (AEC) industry, academia, and governments normally handle separately. By conducting several literature reviews (book, journals, and congresses) and extensive software tests (BIM software: Revit, Archicad, Tekla, and Wood plug-ins: AGACAD, Archiframe, Timber Framing 2015, WoodStud Frame, etc.), the state-of-the-art was assessed in both fields, several cases linking BIM and wood are shown in detail and discussed, various theoretical samples are modelled and shown, and the advantages and disadvantages of each technique and stage are explained. On the other hand, although wood construction has been the most common for hundreds of years, this is not the case of BIM Modeling software developments associated with this materiality. Furthermore, since the appearance of materials such as steel and reinforced concrete, all software developments have focused on these materials, leaving aside the possibility of developing applications for use in wood projects. According to previously discussed, it can be concluded that BIM for Wood has been used more frequently in academia and that both fields have several common processes and, in many cases, only a few BIM-wood tools have been used. Thus, disregarding the high potential and high level of benefits that results with the application of these methodologies for the complete building life cycle (design, construction, and operation).

The issue of environmental sustainability is increasingly topical and one of the most impactful sectors is that of the construction industry. As stated in the reports of the GlobalABC, the building sector is the main responsible for GHG emissions, generating about 37% of global CO2e emissions. Already during the phases of production and construction of buildings about 10% of global emissions are produced, while the remaining part comes from their use, from the energy for air conditioning and lighting. Reducing emissions in the pre-use phase of buildings is therefore a crucial issue for combating climate change. The research investigates the potential of timber construction systems, thanks to the carbon storage property of the material. The proposed calculation methodology is structured according to the LCA-Life Cycle Assessment approach, referring to the C2H phase (from Cradle-To-Handover), and evaluates emissions related to the production and construction of buildings. To identify the timber construction system that minimizes CO2e emissions, within the limits of the investigation (A1-A5 phases), the method was applied to two buildings built with different technologies: one with X-Lam panels and one with a framed structure. The results were analyzed, compared, and discussed to demonstrate that the timber buildings are the most virtuous solution in the Net Zero Carbon perspective by 2050.

Efforts to quantify and reduce greenhouse gas (GHG) emissions of the built environment often neglect embodied emissions, instead focusing on reducing emissions from building operations. Utilizing sustainably sourced mass timber offers low embodied carbon alternatives to traditional concrete and steel structural systems, however the variability in embodied carbon for different mass timber approaches remains understudied. In this study, we used life cycle assessment (LCA) to compare the whole building embodied carbon of nine mass timber design options and two typical concrete and steel reference cases for an eight-story mixed-use building, ensuring structural, acoustic, thermal, programmatic, and fire-rating equivalence between the designs. The study found that the mass timber designs vary significantly, ranging between a 14-52% reduction in whole building embodied carbon from the most impactful reference case, and a 31-73% reduction when considering the structural systems alone. This study demonstrates the value that whole building LCA (WBLCA) provides as a primary driver for low-carbon structural system design and architectural development of mass timber buildings, beyond that of single material comparisons using environmental product declarations (EPDs).

As an emerging building solution, cross-laminated timber (CLT) floors have been increasingly used in mass timber construction. The current vibration design of CLT floors is conservative due to the assumption of simple support conditions in the floor-to-wall connections. It is noted that end fixity occurs as a result of clamping action at the ends, arising from the gravity load applied by the structure above the floor and by the mechanical fasteners. In this paper, the semi-rigid floor-to-wall connections are treated as elastically restrained edges against rotations to account for the effect of partial constraint. A rotational end-fixity factor was first defined to reflect the relative bending stiffness between CLT floors and elastic restraints at the edges. Then, for the design of vibration serviceability of CLT floors as per the Canadian Standard for Engineering Design in Wood (CSA O86), restraint coefficients were defined and their analytical expressions were derived for natural frequencies and the mid-span deflection under a concentrated load, respectively. In particular, a simplified formula of the restraint coefficient for the fundamental frequency was developed to assist engineers in practical design. At last, by comparing with reported experimental data, the proposed design formula showed excellent agreement with test results. In the end, the proposed end fixity factor with their corresponding restraint coefficients is recommended as an effective mechanics-based approach to account for the effect of end support conditions of CLT floors.

Cross-laminated timber (CLT) possesses both good shape stability and the possible two-way force transfer ability due to its crosswise lamination. However, the transverse layers in CLT are prone to rolling shear failure under an out-of-plane load. An innovative multi-layer composite laminated panel (CLP) was developed by combining structural composite lumber (SCL) and dimension lumber to overcome the rolling shear failure while maintaining high mechanical performance and aesthetic appearance of natural wood. The mechanical properties of 5-layer CLP consisted of laminated strand lumber (LSL) and dimension lumber with different layups were evaluated by both static and modal tests. The results showed that the shear resistance, bending stiffness and moment resistance of CLP were up to 143%, 43% and 87% higher than their counterparts of regular CLT, respectively. The failure modes observed in both shear and bending tests indicated that the use of LSL in transverse layers could eliminate the potential rolling shear failure in CLT. With the lamination properties from components tests as inputs, the validity of shear analogy method was assessed by test results. The mechanical properties can be well predicted by shear analogy method except for the bending moment resistance of CLP and CLT with either rolling failure in the cross layer or tension failure in the bottom layer.

This work deals with finding out whether the heart rate values of operators of forwarding machines during the work shift are influenced by the individual activities that the operator has to perform during timber skidding, or by the operators themselves. Furthermore, the work deals with determining the difficulty of individual activities in terms of physical load. For this purpose, the work shift of operators carrying out timber skidding was divided into individual activities: Driving, Maintenance, Forwarding, Break. During these work activities, the heart rate of each operator was taken for subsequent evaluation. The results show that the highest pulse rates of the operators were achieved during the Maintenance of the entrusted machine, while the highest pulse fluctuations in the operators were recorded during Forwarding. As part of this activity, the highest heart rate of the entire measurement process was recorded (132.0000 bpm), but also the lowest (42.0000 bpm). Furthermore, it was proven that both the operator and the activity he performs affect the pulse rate. The activities themselves did not differ from each other in only one of the six cases of comparison. Specifically, it was Driving and Forwarding.

An empirical model for log yield from trees is established and applied in microeconomics of carbon storage in a boreal spruce estate. The transition from pulpwood to sawlogs is a smoother function of stem diameter in the empirical data, in comparison to literature values. Correspondingly, the value transition of trees along with increasing size is gentler. Due to price premium of sawlogs from clearcuttings, all economically feasible treatment schedules terminate in clearcutting. Best capital return rates are gained with two heavy thinnings from above before clearcutting. Present carbon emission prices allow moderate carbon storage increment if the increment is compensated by proportional carbon rent. Doubling the present carbon prices would allow strong carbon storage increments if compensated by carbon rent. Application of nonproportional carbon rent is proposed.

Mass timber products, together with careful forestry management, could help decarbonize the construction industry. These products must be long-lasting, to safely store atmospheric carbon for decades or centuries, and multi-functional, to displace materials and equipment that are emissions-intensive. This paper shows how to optimize mass timber panels as heat-exchangers, suggesting how to eliminate insulation while simplifying HVAC systems. Test panels measured the heat-exchange in steady and transient conditions, when the ventilation was driven by a fan or by thermal buoyancy. The total heatexchange was predicted accurately by theory in all cases. Further investigation is needed to understand the possible heat-recovery effects at the exterior surface.

The expense of carbon sequestration in terms of capital return deficiency is investigated at estate level, in the case of a fertile boreal estate dominated by spruce forest. Thinnings from below result as a high expense of increased rotation age, thinnings from above as a small expense. The expense of increased timber stock is greater than any proportional carbon rent based on present carbon prices. Application of non-proportional carbon rent is proposed.

Building carbon footprint analysis is a key instrument for assessing the impact of different constructions on climate change. Several standards and methodologies are available to calculate the footprint of buildings, including standards and norms, life cycle assessment (LCA), and dedicated software tools. The use of BIM software for these calculations is both scientifically justified and very practical. This scientific publication focusses on the application of a BIM-based research methodology for the analysis of the carbon footprint of a single-family house. The research process included the following steps: (i) design of a single-family house with timber frame construction using Archicad BIM software, (ii) simulation of the building energy performance using the EcoDesigner Star plug-in, (iii) life cycle assessment (LCA) using the plug-in for Archicad, (iv) preparation of a second model with traditional masonry construction for comparison, and (v) comparative analysis of the single-family house models with timber frame and masonry construction. Analysis of the results highlights significant differences in CO2e emissions between masonry and timber buildings and the varying impact of individual elements on the total CO2e emissions of the buildings studied. These findings are relevant for future work on sustainable building design and construction, which aims to minimise negative environmental impacts. The goal of minimising the cumulative carbon footprint of buildings is critical to achieving the Sustainable Development Goals and combating climate change.

The black timber bark beetle Xylosandrus germanus (Blandford) is an invasive ambrosia beetle originating from Southeastern Asia that has become successfully established within Europe and North America. Herein, we provide a review of the spread and distribution of this pest of trees and timber across Europe before and after 2000, along with a review of its habitat preferences. Since the spread of X. germanus across Europe has accelerated rapidly post-2000, emphasis is placed on this period. X. germanus was first recorded in Germany in 1951 and since then in 21 European countries along with Russia. Ethanol-baited traps were deployed in oak, beech, and spruce forest ecosystems in the Western Carpathians, Central Europe, Slovakia, to characterize the distribution and habitat preference of this non-native ambrosia beetle. Captures of X. germanus within Slovakia have been rising rapidly since its first record in 2010, and now this species dominates captures of native ambrosia beetles. X. germanus has spread throughout the whole Slovakia from the south-southwest to the north-northeast over the period of 5–10 years and has also spread vertically into higher altitudes within this country. While living but weakened trees in Europe and North America are attacked by X. germanus, the greatest negative impact within Slovakia is attacks on recently felled logs of oak, beech and spruce trees providing high quality timber/lumber. We suggest that the recent rapid spread of X. germanus in Central Europe is being facilitated by environmental changes, specifically global warming, and the increasing frequency of timber trade. Recommendations for management of X. germanus in forest ecosystems are proposed and discussed, including early detection, monitoring, sanitary measures, etc.

Façade elements are a building component that satisfies multiple performance parameters. Among other things, “advanced façades” take advantage of hybrid solutions, such as assembling laminated materials. In addition to the enhanced mechanical properties that are typical of optimally composed hybrid structural components, these systems are energy-efficient, durable, and offer lighting comfort and optimal thermal performance, an example of which is the structural solution developed in collaboration with the University of Zagreb and the University of Ljubljana within the Croatian Science Foundation VETROLIGNUM project. The design concept involves the mechanical interaction of timber and glass load-bearing members without sealing or bonding the glass-to-timber surfaces. Following earlier research efforts devoted to the structural analysis and optimization of thus-assembled hybrid Cross-Laminated Timber (CLT)-glass façade elements, in this paper, special focus is given to a thermal and energy performance investigation under ordinary operational conditions. A simplified numerical model representative of a full-size building is first presented by taking advantage of continuous ambient records from a Live-Lab mock-up facility in Zagreb. Afterwards, a more detailed Finite Element (FE) numerical analysis is carried out at the component level to further explore the potential of CLT–glass façade elements. The collected numerical results show that CLT–glass composite panels can offer stable and promising thermal performance for façades similar to national and European standard requirements.

Facade elements are known to represent a building component with multiple performance parameters to satisfy. Among others, “advanced facades” take advantage of hybrid solutions, like the assemblage of laminated materials. In addition to enhanced mechanical properties that are typical of optimally composed hybrid structural components, these systems are energy-efficient, durable, and offer lightening comfort and optimal thermal performance. This is the case of the structural solution developed in joint research efforts of the University of Zagreb and the University of Ljubljana, within the Croatian Science Foundation VETROLIGNUM project. The design concept involves the mechanical interaction of timber and glass load-bearing members, without sealing or bonded glass-to-timber surfaces. Laminated glass infilled timber frames are recognized as a new generation of structural members with relevant load-carrying capacity (and especially the enhancement of earthquake resistance of framed systems), but also energy-efficient and cost-effective solutions.

Unmanned aerial vehicle (UAV) systems are widely used in many forest-related fields owing to their cost-intensive and precise surveying technology. This study classified erosion susceptibility (ES) in a timber harvesting area using machine learning (ML) and statistical approaches. In dataset generation for the training and testing process, the digital surface model (DSM) of difference (DoD) for July–June was utilized as a dependent variable, and six terrain maps of the DSM for June were used as independent variables. The ES threshold was set at 5 cm for the binary classification of ES pixels while processing using ML (e.g., random forest and extra gradient boost [XGB]) and statistical (e.g., logistic regression) algorithms for model development. The overall accuracy (OA), receiver operating characteristics, and area under the curve (AUC) were calculated for model accuracy and validation. Although the AUC of all models did not appear acceptable (AUC &gt; 0.7), the XGB model showed the best performance regarding time duration, OA, and AUC by 2 h, 64%, and 0.63, respectively. Despite the low AUC and accuracy of the XGB model, the wheel tracks and edges of the operation road were determined to be susceptible areas in the ES map of the XGB.

The lay-up of cross laminated timber (CLT) leads to significant differences in properties over its cross-section. Particularly the out-of-plane shear behavior of CLT is effected by the changes in shear moduli over the cross-section. Results from laboratory shear tests are used to evaluate the shear stiffness of 3- and 5-layer CLT panels in their major and minor strength direction. The results are compared to calculated shear stiffness values on evaluated single-layer properties as well as commonly used property ratios using the Timoshenko beam theory and the shear analogy method. Differences between the two calculation approaches are pointed out. The shear stiffness is highly sensitive to the ratio of the shear modulus parallel to the grain to the shear modulus perpendicular to the grain. The stiffness values determined from two test measurements are compared with the calculated results. The level of agreement is dependent on the number of layers in CLT and the property axis of the CLT panels.

Reporting on CSR activities has become the essence of reporting for modern business entities. In this regard, particular attention is paid to public interest companies. Therefore, the following paper aims to answer the question of whether there are differences in the linguistic structure of the studied CSR reports in three selected industry indices on the Warsaw Stock Exchange (WSE) in Poland, i.e. WIG-energy index, WIG-fuel index, WIG-mining index and their relationship with the performance of selected companies. The study was conducted on a purposely selected sample of companies between 2013 and 2018. A total of 138 CSR reports and 138 annual separate financial statements prepared in accordance with international balance sheet law were collected. The study was carried out based on a panel regression model. It was found that CSR reports contained similar average percentages of parts of speech such as nouns and adjectives. When linking the economic performance of companies, expressed with selected indices, to the information on the implementation of CSR concepts, it was revealed that the results are more likely to describe business performance when it is satisfactory.

In a single-center, retrospective study, 22 cases were enrolled and divided into two groups: those who underwent surgical wide excision (group A) and those who did not (group B). The study included 13 cases in group A and 9 cases in group B. In group A, 6 cases solely underwent surgical wide excision, while 7 cases received additional treatments like radiotherapy or chemotherapy. Conversely, in group B, 4 cases received chemotherapy, 4 cases received radiotherapy, and 1 case was managed through observation alone. The mean follow-up time was 60.15 months in group A and 43.44 months in group B, with no significant difference observed. In group A, 9 cases resulted in mortality, whereas 6 cases died within the follow-up period in group B. Lesion-free intervals post-operation were observed predominantly in group A, while 7 cases in group B never experienced freedom from skin lesions. Kaplan-Meier survival curve analysis demonstrated a significant difference between the survival curves of the two groups (P = 0.046). Among non-HIV Kaposi’s sarcoma patients, surgical wide excision appears to have a role in treatment. Patients in group A exhibit a more favorable outcome in the survival curve analysis.

The European Space Agency (ESA) defines as Earth observation (EO) Level 2 information product a single-date multi-spectral (MS) image corrected for atmospheric, adjacency and topographic effects, stacked with its data-derived scene classification map (SCM), whose thematic map legend includes quality layers cloud and cloud-shadow. ESA EO Level 2 product generation is an inherently ill-posed computer vision (CV) problem never accomplished to date in operating mode by any EO data provider at the ground segment. Herein, it is considered: (I) necessary not sufficient pre-condition for the yet-unaccomplished dependent problems of semantic content-based image retrieval (SCBIR) and semantics-enabled information/knowledge discovery (SEIKD) in multi-source EO big data cubes. (II) Synonym of EO Analysis Ready Data (ARD) format. (III) Equivalent to a horizontal policy for background developments in Space Economy 4.0. In compliance with the GEO-CEOS Quality Assurance Framework for EO Calibration/Validation guidelines, to contribute toward filling an analytic and pragmatic information gap from multi-sensor EO big data to timely, comprehensive and operational EO value-adding information products and services, this work presents an innovative AutoCloud+ CV software toolbox for cloud and cloud-shadow quality layer detection in ESA EO Level 2 product. In vision, spatial information dominates color information. Inspired by this true-fact, the inherently ill-posed AutoCloud+ CV software was conditioned, designed and implemented to be “universal”, meaning fully automated (no human-machine interaction is required), near real-time, robust to changes in input data and scalable to changes in MS imaging sensor’s spatial and spectral resolution specifications.

For the treatment of cancer and other diseases, therapeutic targeting of non-coding RNAs (ncRNAs) such as microRNAs (miRNAs) and long non-coding RNAs (lncRNAs) is an attractive approach. RNA-based therapeutics have been extensively researched over the past decade, with antisense oligonucleotides and small interfering RNAs being the most commonly used. Some of these have even gained FDA approval. However, the results of trials have been mixed, with some studies reporting strong effects while others have shown limited effectiveness or toxicity. Alternative treatments, such as antimiRNAs, are currently in clinical trials. There is growing interest in the use of lncRNA-based therapies. This Perspective discusses the main challenges of ncRNA therapeutics, including specificity, delivery and tolerability. It also highlights emerging approaches that aim to improve their success.

Non-compliant (NC) structures are often encountered in building construction in developing countries. This is a condition whereby erected buildings do not follow regulatory standards, especially in the provision of reinforcements. Therefore, under an earthquake load, the structures do not have sufficient resistance against such load. The structural elements of the building, which often have NC conditions, are the beam-column joints because they do not contain adequate shear reinforcements due to installation difficulty. This study aims to determine the structural performance of the reinforced concrete (RC) frame, which has a reinforcement deficiency in the beam-column joints. Numerical simulation was conducted on the Kakaletsis structure model by modifying the reinforcement details at the joints to represent the NC conditions. The non-linear modeling and analysis of the structural model were carried out using ATENA software. The analysis showed that the reduction in shear reinforcements in the NC model joint caused a decrease in load-carrying capacity by about 26.04%. A shift was also observed in the collapse pattern, i.e., from the beam to the end of the column, causing global failure and reducing the undamaged but increasing more severely damaged condition. This showed that the NC structure, due to the non-conformance of reinforcement, significantly reduced the structure's performance.

An exhaustive list of thirteen instances of reports confirming experimentally the relativistic Doppler relation, are examined. For those involving longitudinal Doppler, the non-relativistic relation is seen to be confirmed, within the reported experimental accuracies, to the same degree as the standard relativistic relation. Higher values of the speed of the emitter would be required to examine further the claimed confirmations. For those reports involving saturation spectroscopy, there is much confusion over the appropriate Doppler relation to be used, together with some serious analytical flaws. For the two cases that involve transverse Doppler, there are seen to be either serious faults in the theoretical part, or intrusion from the first order effect. Therefore, the reported conclusions - that the results for the experiments confirm the relativistic SR relation - cannot be justified by any of the experimental works.

We introduce a novel key exchange protocol based on non-commutative matrix multiplication defined in $\mathbb{F}_p^{n \times n}$. The security of our method does not rely on computational problems as integer factorization or discrete logarithm whose difficulty is conjectured. We show that the public, secret and channel keys become indistinguishable to the eavesdropper under matrix multiplication. Remarkably, for achieving a 512-bit security level, the public key is 1024 bits and the private key is 768 bits, making them the smallest keys among post-quantum key exchange algorithms. Also, we discuss how to achieve key authentication, interdomain certification and Perfect Forward Secrecy (PFS). Therefore, Lizama's algorithm becomes a promising candidate to establish shared keys and secret communication between (IoT) devices in the quantum era.

We introduce a novel key exchange protocol based on non-commutative matrix multiplication defined in $\mathbb{Z}_p^{n \times n}$. The security of our method does not rely on computational problems as integer factorization or discrete logarithm whose difficulty is conjectured. We claim that the unique eavesdropper's opportunity to get the secret/private key is by means of an exhaustive search which is equivalent to the unsorted database search problem. Furthermore, we show that the secret/private keys become indistinguishable to the eavesdropper. Remarkably, to achieve a 512-bit security level, the keys (public/private) are of the same size when matrix multiplication is done over a reduced 8-bit size modulo. Also, we discuss how to achieve key certification and Perfect Forward Secrecy (PFS). Therefore, Lizama's algorithm becomes a promising candidate to establish shared keys and secret communication between (IoT) devices in the quantum era.

This article develops duality principles and numerical results for a large class of non-convex variational models. The main results are based on fundamental tools of convex analysis, duality theory and calculus of variations. More specifically the approach is established for a class of non-convex functionals similar as those found in some models in phase transition. Finally, in the last section we present a concerning numerical example and the respective software.

Let $\mathbb{K}$ be a non-Archimedean (complete) valued field satisfying \begin{align*} \left|\sum_{j=1}^{n}\lambda_j^2\right|=\max_{1\leq j \leq n}|\lambda_j|^2, \quad \forall \lambda_j \in \mathbb{K}, 1\leq j \leq n, \forall n \in \mathbb{N}. \end{align*} For $d\in \mathbb{N}$, let $\mathbb{K}^d$ be the standard $d$-dimensional non-Archimedean Hilbert space. Let $m \in \mathbb{N}$ and $\text{Sym}^m(\mathbb{K}^d)$ be the non-Archimedean Hilbert space of symmetric m-tensors. We prove the following result. If $\{\tau_j\}_{j=1}^n$ is a collection in $\mathbb{K}^d$ satisfying $\langle \tau_j, \tau_j\rangle =1$ for all $1\leq j \leq n$ and the operator $\text{Sym}^m(\mathbb{K}^d)\ni x \mapsto \sum_{j=1}^n\langle x, \tau_j^{\otimes m}\rangle \tau_j^{\otimes m} \in \text{Sym}^m(\mathbb{K}^d)$ is diagonalizable, then \begin{align}\label{WELCHNONABSTRACT} \max_{1\leq j,k \leq n, j \neq k}\{|n|, |\langle \tau_j, \tau_k\rangle|^{2m} \}\geq \frac{|n|^2}{\left|{d+m-1 \choose m}\right| }. \end{align} We call Inequality (\ref{WELCHNONABSTRACT}) as the non-Archimedean version of Welch bounds obtained by Welch [\textit{IEEE Transactions on Information Theory, 1974}]. We formulate non-Archimedean Zauner conjecture.

Nonionizing millimeter-waves (MMW) interact with cells in a variety of ways. Here the inhibited cell division effect was investigated using 85-105 GHz MMW irradiation within the ICNIRP (International Commission on Non-Ionizing Radiation Protection) non-thermal 20 mW/cm2 safety standards. Irradiation using a power density of about 1.0 mW/cm2 , SAR over 5-6 hours on 50 cells/μl samples of Saccharomyces cerevisiae model organism resulted in 62% growth rate reduction compared to the control (sham). The effect was specific for 85-105 GHz range, and was energy and cell density dependent. Irradiation of wild type and Δrad52 (DNA damage repair gene) deleted cells presented no differences of colony growth profiles indicating non-thermal MMW treatment does not cause permanent genetic alterations. Dose versus response relations studied using a standard horn antenna (~1.0 mW/cm2) and compared to that of a compact waveguide (17.17 mW/cm2) for increased power delivery resulted in complete termination of cell division via non-thermal processes supported by temperature rise measurements. We have shown that non-thermal MMW radiation has potential for future use in treatment of yeast related diseases and other targeted biomedical outcomes.

Nonionizing millimeter-waves (MMW) are reported to interact with cells in a variety of ways. Possible mechanisms of the inhibited cell division effect were investigated using 85-105 GHz MMW irradiation within the ICNIRP (International Commission on Non-Ionizing Radiation Protection) non-thermal 20 mW/cm² safety standards. ~1.0 mW/cm² exposure over 5-6 hours treatment on 50 cells/μl samples of Saccharomyces cerevisiae model organism, resulted in 62% growth rate reduction compared to control (sham). The effect was specific for 85-105 GHz range and energy dose and cell density dependent. Irradiation of wild type and Δrad52 (DNA damage repair gene) deletion cells presented no differences of colony growth profiles indicating non-thermal MMW treatment does not cause genetic alterations. Dose versus response relations studied using a standard horn antenna (~1.0 mW/cm²) and compared to that of a compact waveguide (17.17 mW/cm²) for increased power delivery resulted in complete termination of cell division via non-thermal processes supported by temperature rise measurements. Combinations of MMW mediated Structure Resonant Energy Transfer (SRET), membrane modulations eliciting signaling effects, and energetic resonance with biomolecules were indicated to be responsible for the observations reported. Our results provide novel mechanistic insights enabling innovative applications of nonionizing radiation procedures for eliciting targeted biomedical outcomes.

Non-isocyanate polyurethane synthesis by non-Sn catalysis is an essential challenge toward green polyurethane synthesis. Bismuth compounds are attractive candidates due to their low cost, low toxicity, and availability to urethane chemistry. We applied various Bi catalysts to the self-polycondensation of a bishydroxyurethane monomer and found BiCl3 to be an excellent catalyst through optimization. The catalytic activity and price of BiCl3 are comparable to those of Bu2SnO, while its toxicity is significantly low. BiCl3 is, therefore, a promising alternative to Sn-based catalysts in non-isocyanate polyurethane synthesis.

Wine is a processed beverage that offers high nutritional and health benefits. It is produced from grape must, which undergoes fermentation by yeasts (and sometimes lactic acid bacteria) to create a product that is highly appreciated by consumers worldwide. However, if only one type of yeast, specifically Saccharomyces cerevisiae, were used in the fermentation process, the resulting wine would lack aroma and flavor and may be rejected by consumers. To produce wine with a desirable taste and aroma, non-Saccharomyces yeasts are necessary. These yeasts contribute volatile aromatic compounds that significantly impact the wine’s final taste. They promote the release of primary aromatic compounds through a sequential hydrolysis mechanism involving several glycosidases unique to these yeasts. This review will discuss the unique characteristics of these yeasts (Schizosaccharomyces pombe, Pichia kluyveri, Torulaspora delbrueckii, Wickerhamomyces anomalus, Metschnikowia pulcherrima, Hanseniaspora vineae, Lachancea thermotolerans, Candida stellata, and others) and their impact on wine fermentations and co-fermentations. Their existence and the metabolites they produce enhance the complexity of wine flavor, resulting in a more enjoyable drinking experience.

Post-quantum public cryptosystems introduced so far do not define an scalable public key infrastructure for the quantum era. We demonstrate here a public certification system based in Lizama’s non-invertible Key Exchange Protocol which can be used to implement a public key infrastructure (PKI), secure, scalable, interoperable and efficient. We show functionality of certificates across different certification domains. Finally, we discuss that non-invertible certificates can exhibit Perfect Forward Secrecy (PFS).

It is well established in literature that the public debt and economic growth bear positive and non-linear relationship. However, in recent literature, evidence of no causal relationship is found when accounted for endogeneity in case of advanced economies (Panizza & Presbitero, 2014). Chudik, Mohaddes, Pesaran, & Raissi, (2017) analyse the data on forty countries and find no evidence of universally applicable threshold effect in the relationship between debt and growth. These advancements in the debt-growth literature provides the motivation to re-explore the relationship between public debt and economic growth under non-linearity and endogeneity in context of developing economies of South Asia including Pakistan, India, Bangladesh and Sri-Lanka for the period 1980-2014. There exists a significant, positive but nonlinear relationship between the public debt and economic growth for the selected set of developing countries when accounted for endogeneity and non-linearity. The negative association between the public debt and economic growth for SAARC region is found when the debt level is higher than 61% of GDP which is quite lower than developed economies (90% of GDP). Individual threshold levels for debt-to-GDP ratio divulge that Sri Lanka, Pakistan and India need to control their public borrowings as their current debt levels are higher and/or around the respective threshold levels.

We establish a new Gagliardo-Nirenberg inequality characterized by radial symmetry and involving potentials exhibiting pure power polynomial behaviour. As an application of our result, we investigate the existence of extremals for this inequality, which also correspond to stationary solutions for the nonlinear Schrödinger equation with inhomogeneous nonlinearity, competing with Hs-subcritical nonlinearities, either of local or non-local nature.

Non-alcoholic steatohepatitis (NASH), which is the most severe manifestation of non-alcoholic fatty liver disease (NAFLD), has been recognized as a major hepatocellular carcinoma (HCC) catalyst. However, the molecular mechanism of NAFLD-NASH-HCC sequence remains unclear and a specific and effective treatment for NASH has not yet been established. The progress in this field depends on the availability of reliable preclinical models which show the steady progress to NASH, liver cirrhosis, and HCC. However, most of NASH mouse models that have been described to date develop NASH generally for more than 24 weeks and there is an uncertainty of HCC development. To overcome such shortcomings of experimental NASH studies, we established a novel NASH-HCC mouse model with very high reproducibility, generality, and convenience. We treated male C57BL/6J mice with a newly developed choline-deficient and methionine-restricted high-fat diet (CDMRHFD) for 60 weeks. Treatment of CDMRHFD for 3 weeks revealed marked steatosis, lobular inflammation, and fibrosis, histologically diagnosed as NASH. Liver cirrhosis was observed in all mice with 36-week treatment. Liver nodule emerged at 12 weeks of the treatment, and diameter >2 mm liver tumors developed in all mice at 24 weeks of the treatment. In conclusion, our rapidly progressive and highly reproducible NASH-liver cirrhosis-HCC model is helpful for preclinical development and research on the pathogenesis of human NAFLD-NASH-HCC. Our mouse model would be useful for the development of novel chemistry for NASH-HCC-targeted therapies or HCC prevention strategies.

(1) Background: Although multiple studies have reported on the therapeutic effects of Atezo+Bev for the treatment of NASH-related liver cancer, few studies have focused on its effect on liver reserve. Here, we aimed to compare the changes in hepatic reserve during the Atezo+Bev treatment of NAFLD/NASH-related HCC and of non-NAFLD/non-NASH-related HCC. (2) Methods: We retrospectively compared the changes in ALBI score in 109 patients with NAFLD/NASH or non-NAFLD/non-NASH during 12 weeks of treatment with Atezo+Bev for advanced HCC between September 2019 and January 2022. PSM was performed, and the OS, PFS, and PPS of the two groups were compared. (3)Results: The ALBI after 12 weeks of Atezo+Bev treatment was significantly worse in the NAFLD/NASH group than in the non-NAFLD/non-NASH group. Analysis of the 24 propensity score-matched pairs of cases with NAFLD/NASH or non-NAFLD non-NASH yielded similar results. The prognoses of the two groups were similar with respect to OS and PFS, but the NAFLD/NASH group had a significantly shorter PPS. The 24 matched pairs had similar OS and PFS, but the PPS of the NAFLD/NASH group was shorter. (4)Conclusion: Atezo+Bev treatment may worsen hepatic reserve, and there-fore life expectancy, in patients with NAFLD/NASH-related liver cancer.

This article develops a duality principle and a related convex dual formulation suitable for a large class of models in physics and engineering. The results are based on standard tools of functional analysis, calculus of variations and duality theory. In particular, we develop applications to a model in non-linear elasticity.

The connection of two phenomena - non-conservative friction forces and dissipation-induced instability can lead to many interesting engineering problems. The paper studies general material-dependent damping influence on dynamical instability of disc brake systems leading to brake squeal. The effect of general damping is demonstrated on a minimal and complex model of a disc brake. A complex system including material-dependent damping is defined in the commercial finite element software. The finite element model validated by experimental data on the brake-disc test bench is used to compute the influence of a pad and a disc damping variations on system stability by complex eigenvalue analysis. Analyzes show a significant sensitivity of the experimentally verified unstable mode of the system to the ratio of the damping between the disc and the friction material components.

Near-fault ground motions can cause severe damage to civil structures, including bridges. Safety assessment of these structures for near fault ground motion is usually performed through Non-Linear Dynamic Analyses, while faster methods are often used. IMPAb (Incremental Modal Pushover Analysis for Bridges) permits to investigate the seismic response of a bridge by considering the effects of higher modes, which are often relevant for bridges. In this work, IMPAb is applied to a bridge case study considering near-fault pulse-like ground motion records. The records were analyzed and selected from the European Strong Motion Database and the pulse parameters were evaluated. In the paper results from standard pushover procedures and IMPAb are compared with nonlinear Response-History Analysis (NRHA), considering also the vertical component of the motion, as benchmark solutions and incremental dynamic analysis (IDA). Results from the case study demonstrate that the vertical seismic action has a minor influence on the structural response of the bridge. Therefore IMPAb, which can be applied considering vertical motion, remains very effective conserving the original formulation of the procedure, and can be considered a well performing procedure also for near-fault events.

Abrasive Water Jet Machining (AWJM) is a non-conventional machining process that, unlike other methods, is deemed superior because of its applicability, versatility, and no heat-affected zones in the target material. The main objective of this paper was to develop a cheap, practical model for a low-pressure water jet cutting machine and provide some empirical test data for cutting delicate materials. Proper design calculations were performed and are included for both the water jet machine and the two-axis numerical control. Finite Element Analysis results validate the structural integrity of beams and columns in AWJM. Computational Fluid Dynamic analysis of the nozzle shows good agreement with the theoretical calculations regarding the pressure and velocity of the water-abrasive mixture exiting the nozzle. Modal analysis in ANSYS was done to mitigate potential failure due to resonance induced by vibrations. Limited testing on various thicknesses of polystyrene foam ranging from 1-5 mm thickness and rubber sheet of 1 mm thickness showed that even low pressure of 25-30 bar was sufficient to produce a kerf without any burr. However, extensive testing to report optimized parameters like nozzle transverse speed, standoff distance, abrasive flow rate, etc for working at low-pressure ranges is still a consideration for future investigation.

Postprandial glucose levels between 4 and 7.9 hours (PPG4–7.9h) correlate with mortality from various diseases including hypertension, diabetes, cardiovascular disease, and cancer. This study aimed to assess if predicted PPG4–7.9h could diagnose diabetes. Two groups of participants were involved: Group 1 (4420 participants) had actual PPG4–7.9h, while Group 2 (8422 participants) lacked this measure but had all the diabetes diagnostic measures. Group 1 underwent multiple linear regression to predict PPG4–7.9h using 30 predictors, achieving accuracy within 11.1 mg/dL in 80% of the participants. Group 2 had PPG4–7.9h predicted using this model. Receiver operating characteristic curve analysis showed that predicted PPG4–7.9h could diagnose diabetes with an accuracy of 87.3% in Group 2, with a sensitivity of 75.1% and specificity of 84.1% at the optimal cutoff of 102.5 mg/dL. Simulation on 10,000 random samples from Group 2 revealed that 175 participants may be needed to investigate PPG4–7.9h as a diabetes diagnostic marker with a power of at least 80%. In conclusion, predicted PPG4–7.9h appears to be a promising diagnostic indicator for diabetes. Future studies seeking to ascertain its definitive diagnostic value might require a minimum sample size of 175 participants.

Turbulent dissipation is a central issue in the star and galaxy formation process. Its fundamental property of space-time intermittency, well characterised in incompressible laboratory experiments, remains elusive in cosmic turbulence. Progress requires the combination of state-of-the-art modelling, numerical simulations and observations. The power of such a combination is illustrated here where the statistical method intended to locate extrema of velocity shears in a turbulent field is applied to numerical simulations of compressible magneto-hydrodynamical (MHD) turbulence dedicated to dissipation scales and to a nearby turbulent diffuse molecular cloud. We demonstrate that short-spacing increments of observables can detect strongly dissipative structures. In our simulations, we compute structure functions of various synthetic observables and show that they verify Extended Self-Similarity. This allows to compute their intermittency exponents and we show how they could help constraining some properties of the underlying three-dimensional turbulence. In observations of a turbulent cloud close to the Sun in our Galaxy, a remarkable coherent structure of velocity shear extremum is disclosed . At the location of the largest velocity shear, this coherent structure is found to foster 10 × more carbon monoxide molecules than standard diffuse molecular gas, an enrichment supported by models of non-equilibrium warm chemistry triggered by turbulent dissipation. The power of the combination between modelling and observations is also illustrated by observations of the CH+ cation that provide unique quantitative informations on the kinetic energy trail in the massive, multi-phase and turbulent circum-galactic medium of a galaxy group at redshift z = 2.8.

In this paper is presented the design and syntheis of a dynamic output feedback neural network controller for a non-holonomic mobile robot. First the dynamic model of a non-holonomic mobile robot is presented, in which these constraints are considered for the mathematical derivation of a feasable representation for this kind of robot. Then two control strategies are provided based on kinematic control for this kind of robot. The first control strategy is based on driftless control, this means, that considering that the velocity vector of the mobile robot is orthogonal to its restriction a dynamic output feedback and neural network controller is designed in order that the control action would be zero only when the velocity of the mobile robot is zero. The Lyapunov stability theorem is implemented in order to find a suitable control law. Then another control strategy is designed for trajectory tracking purposes, which similar to the driftless controller, a kinematic control scheme is provided but suitable to implement in more sophisticated hardware. In both control strategy a dynamic control law is provided along with a feedforward neural network controller, so in this way, by the Lyapunov theory the stability and convergence to the origin of the mobile robot position coordinates is ensured. Finally, two numerical experiment are presented in order to validate the theoretical results synthetized in this research study. Discussions and conclusions are provided in order to analyze the results found in this research study.

Non-vertebrate species represent about ~95% of known metazoan (animal) diversity. They remain to this day relatively unexplored genetically, but understanding their genome structure and function is pivotal for expanding our current knowledge of evolution, ecology and biodiversity. Following the continuous improvements and decreasing costs of sequencing technologies, many genome assembly tools have been released, leading to a significant amount of genome projects being completed in recent years. In this review, we examine the current state of genome projects of non-vertebrate animal species. We present an overview of available sequencing technologies, assembly approaches, as well as pre and post-processing steps, genome assembly evaluation methods, and their application to non-vertebrate animal genomes.

Background: Thousands of genetic variants have been associated with hematological traits, though target genes remain unknown at most loci. Also, limited analyses have been conducted in African ancestry and Hispanic/Latino populations; hematological trait associated variants more common in these populations have likely been missed. Methods: To derive gene expression prediction models, we used ancestry-stratified datasets from the Multi-Ethnic Study of Atherosclerosis (MESA, including N=229 African American and N=381 Hispanic/Latino participants, monocytes) and the Depression Genes and Networks study (DGN, N = 922 European ancestry participants, whole blood). We then performed a transcriptome-wide association study (TWAS) for platelet count, hemoglobin, hematocrit, and white blood cell count in African (N = 27,955) and Hispanic/Latino (N = 28,324) ancestry participants. Results: Our results revealed 24 suggestive signals (p < 1×10^(-4)) that were conditionally distinct from known GWAS identified variants and successfully replicated these signals in European ancestry subjects from UK Biobank. We found modestly improved correlation of predicted and measured gene expression in an independent African American cohort (the Genetic Epidemiology Network of Arteriopathy (GENOA) study (N=802), lymphoblastoid cell lines) using the larger DGN reference panel; however, some genes were well predicted using MESA but not DGN. Conclusions: These analyses demonstrate the importance of performing TWAS and other genetic analyses across diverse populations and of balancing sample size and ancestry background matching when selecting a TWAS reference panel.

The quality and shelf-life of NCS (Non-centrifugal sugar) mainly depend on the moisture content present in it. NCS formed by the current practice of open sun drying contains moisture substantially greater than the acceptable level of 3%. This paper presents the work taken up to design a tunnel dryer to attain require moisture content in granular NCS for various load conditions. Initially, an experimental investigation had been carried out on a laboratory scale dryer to achieve required moisture content (< 3%) for various load conditions. This experimental data was used for validating two drying models and found that one of the models is best suitable for designing an industrial-scale dryer. For various load conditions on each tray and dryer exit temperature, nine different cases were arrived at. The number of trucks, trays, drying time and energy requirements were computed using the suitable theoretical model. Tunnel dryer with a length of 18 m, a height of 1.2 m, a width of 1 m, number of trucks of 18 and 24 number of trays on each truck was found to be the suitable dryer to dry 1 tone of NCS based on the minimum energy requirement of 176.49 MJ, and a minimum drying time of 68 minutes.

Untranslated regions (UTRs) of flaviviruses contain a large number of RNA structural elements involved in mediating the viral life cycle, including cyclisation, replication, and encapsidation. Here we report on a comparative genomics approach to characterize evolutionarily conserved RNAs in the 3'UTR of tick-borne, insect-specific and no-known-vector flaviviruses in silico. Our data support the wide distribution of previously experimentally characterized exoribonuclease resistant RNAs xrRNAs within tick-borne and no-known-vector flaviviruses and provide evidence for the existence of a cascade of duplicated RNA structures within insect-specific flaviviruses. On a broader scale, our findings indicate that viral 3'UTRs represent a flexible scaffold for evolution to come up with novel xrRNAs

The aim of the study was to identify factors associated with non-adherence to tuberculosis (TB) preventive treatment among contacts with latent TB infection of new cases of pulmonary TB cases reported in Catalonia in 2019-2021. All contacts aged 18 years or older with a latent TB infection who received a TB preventive treatment were included in the study. The Chi square test and the odds ratios (OR) were used to assess the association between non-adherence to TB preventive treatment and the study variables, considering a p < 0.05 as statistically significant. Multiple logistic regression analysis was used to detect the in-dependent factors associated with TB preventive treatment non-adherence, considering a p < 0.05 as statistically significant. The percentage of non-adherence to TB preventive treatment found in this study was 23.7%. A multivariable logistic regression analysis determined that the following factors were significantly associated with TB preventive treatment non-adherence among adult contacts: “exposure at school or workplace” (aOR = 3.34), “exposure to an index case without laboratory confirmation of TB” (aOR = 2.07), “immigrant contact” (aOR = 1.81), “male gender” (aOR = 1.75) and “exposure duration <6 hours per week or sporadic exposure” (aOR = 1.60). By contrast, the factor “short-term TB preventive treatment regimen” (aOR = 0.38) was significantly associated with a lower treatment non-adherence. Adherence to TB preventive treatment should be improved among adult contacts of TB pulmonary cases with latent TB infection by recommending short-term treatment regimens and by developing health education activities, with a greater focus on contacts with factors associated with treatment non-adherence.

Non-alcoholic beer (NAB) or low alcoholic beer (LAB) are taking over the market with a growing sale. Sus-tainable recycling and valorization of exhausted brewer’s spent grains (BSG) coming from craft beer is a relevant issue in brewing process. In this work, recycled BSG and BSG+GJ (supplemented with 10% grape juice) were used as wort-substrate to inoculate already selected non-conventional yeasts to produce NABLAB craft beer. Results showed that wort composed by only recycled BSG produced appreciate NAB beers (ethanol from 0.12% to 0.54 % v/v) while the addition of 10% of grape juice made LAB beers (ethanol from 0.82 to 1.66 % v/v). As expected, volatile compounds production was highest with the addition of grape juice. Lachancea thermotolerans confirmed the lactic acid production and, as Saccharomyces cerevisiae, is characterized by (in both worts) ethyl butyrate and isoamyl acetate, while Torulaspora delbrueckii produced relevant amounts of exanol, phenylethyl acetate and β-phenyl ethanol (wort added with grape juice). Wickeramhomyces anomalus and Pichia kluyvery showed consistent volatile production but only in wort with grape juice addition where a fermentation activity was exhibited. The overall results indicated that reused BSGs, non-conventional yeasts and grape juice is a suitable strategy for specialty NABLAB beer.

With increased vulnerabilities and vast technology landscapes, it is extremely critical to build systems which are highly resistant to cyber-attacks, to break into systems to exploit. It is almost impossible to build 100% secure authentication & authorization mechanisms merely through standard password / PIN (With all combinations of special characters, numbers & upper/lower case alphabets and by using any of the Graphical password mechanisms). The immense computing capacity and several hacking methods used, make almost every authentication method susceptible to cyber-attacks in one or the other way. Only proven / known system which is not vulnerable in spite of highly sophisticated computing power is, human brain. In this paper, we present a new method of authentication using a combination of computer’s computing ability in combination with human intelligence. In fact this human intelligence is personalized making the overall security method more secure. Text based passwords are easy to be cracked ^[6]. There is an increased need for an alternate and more complex authentication and authorization methods. Some of the Methods ^{[7] [8]} in the category of Graphical passwords could be susceptible, when Shoulder surfing/cameras/spy devices are used.

Previous studies demonstrate the critical importance of non-coding RNAs interfacing with chromatin-modifying machinery resulting in promoter-enhancer-based gene regulation and raise the possibility that many other enhancer-like RNAs may operate via similar mechanisms. Critically, more than 80% of the disease-linked variations identified in genome-wide studies are located in the non-coding regions of genomes, especially non-coding RNA, suggesting non-coding RNAs are relevant to disease. Thus, a critical path forward for understanding non-coding RNAs' role, especially long non-coding RNAs, is to understand the genomic regions' transcriptional regulation, especially non-coding regions. Here, we developed a user-friendly R package called SomaGene for studying and identifying enhancer-like non-coding RNAs with enriched somatic mutations in the cancer genome. SomaGene accepts different genomic variants (whole genome/exome somatic point mutations, structural variations, copy number variations) to identify those RNAs that significantly mutated in diseases (e.g., cancer). It then uses multiple publicly available genomics and epigenetics datasets including ENCODE epigenomics annotations, FANTOM5 tissue-specific expression profiles, disease-associated genome-wide association SNPs, and tissue-specific eQTL pairs to identify those RNAs with potentially enhancer function. SomaGene, as a powerful R package, can provide the opportunity to cancer scientists to study the roles of non-coding RNAs in different cancer genomes.

In this article, the usual factorials and binomial coefficients have been generalized and extended to the negative integers. Basing on this generalization and extension, a new kind of polynomials has been proposed, which led directly to the non-classical hypergeometric orthogonal polynomials and the non-classical second-order hypergeometric linear DEs. The resulting polynomials can be used in non-relativistic and relativistic QM, particularly, in the case of the Schrödinger equation, and Dirac equations for an electron in a Coulomb potential field.

Numerical models widely used for hydrocarbon phase behavior and compositional flow simulations are based on assumption of thermodynamic equilibrium. However, it is not uncommon for oil and gas-condensate reservoirs to exhibit essentially non-equilibrium phase behavior, e.g., in the processes of secondary recovery after pressure depletion below saturation pressure, or during gas injection, or for condensate evaporation at low pressures. In many cases the ability to match field data with equilibrium model depends on simulation scale. The only method to account for non-equilibrium phase behavior adopted by the majority of flow simulators is the option of limited rate of gas dissolution (condensate evaporation) in black oil models. For compositional simulations no practical yet thermodynamically consistent method has been presented so far except for some upscaling techniques in gas injection problems. Previously reported academic non-equilibrium formulations have a common drawback of doubling the number of flow equations and unknowns compared to the equilibrium formulation. In the paper a unified thermodynamically-consistent formulation for compositional flow simulations with non-equilibrium phase behavior model is presented. Same formulation and a special scale-up technique can be used for upscaling of an equilibrium or non-equilibrium model to a coarse-scale non-equilibrium model. A number of test cases for real oil and gas-condensate mixtures are given. Model implementation specifics in a flow simulator are discussed and illustrated with test simulations. A non-equilibrium constant volume depletion algorithm is presented to simulate condensate recovery at low pressures in gas-condensate reservoirs. Results of satisfactory model matching to field data are reported and discussed.

GCTs are developmental tumors and likely to reflect ontogenetic and teratogenetic determinants. The objective was to identify syndromes with or without congenital anomalies and non-syndromic defects as potential risk factors. Patients with extracranial GCTs (eGCTs) registered in MAKEI 96/MAHO 98 between 1996 and 2017 were used. According to Teilum's holistic concept malignant and benign teratomas were registered. We used a case control study design with Orphanet as a reference group for syndromic defects and the Mainz birth registry (EUROCAT) for congenital anomalies at birth. Co-occurring genetic syndromes and/or congenital anomalies were assessed accordingly. Odds ratios and 95% confidence intervals were calculated and p-values for Fisher’s exact test with Bonferroni correction if needed. A strong association was confirmed for Swyer (OR 338.6, 95% CI 43.7-2623.6) and Currarino syndrome (OR 34.2, 95% CI 13.2-88.6). We additionally found 17 isolated cases of eGCT with a wide range of syndromes, however not significantly associated following Bonferroni correction. All these cases pertained to girls. Regarding non-syndromic defects, no association with eGCTs could be identified. In our study we confirmed a strong association for Swyer and Currarino syndromes with additional congenital anomalies.

Meat serves as a vital component of the human diet, offering a rich source of protein and essential trace elements. China stands as both a significant producer and consumer of meat on a global scale, leading the world in terms of total meat production and consumption. As the standard of living within the country continues to rise, there is a growing emphasis on the nutritional value and safety of meat consumption. The tenderness of meat is a critical factor influencing its overall quality. Traditionally, tenderness has been assessed through shear force testing, a method that is inherently destructive, inefficient, and results in considerable sample wastage. In light of these drawbacks, non-destructive testing techniques have emerged as a preferred alternative, promising greater accuracy, efficiency, and convenience without compromising the integrity of the samples. This paper delves into the application of five advanced non-destructive testing technologies in the realm of meat tenderness assessment. These include near-infrared spectroscopy, hyperspectral imaging, Raman spectroscopy, airflow optical fusion detection, and nuclear magnetic resonance detection. Each technology is scrutinized for its respective strengths and limitations, providing a comprehensive overview of their current utility and potential for future development. Moreover, the integration of these techniques with the latest advancements in artificial intelligence (AI) technology is explored. The fusion of AI with non-destructive testing offers a promising avenue for the development of more sophisticated, rapid, and intelligent systems for meat tenderness evaluation. This integration is anticipated to significantly enhance the efficiency and accuracy of quality assessment in the meat industry, ensuring a higher standard of safety and nutritional value for consumers. The paper concludes with a set of technical recommendations aimed at guiding the future direction of non-destructive, AI-enhanced meat tenderness detection, thereby contributing to the ongoing improvement of the meat industry in China and beyond.

Despite significant milestones in armed conflict research generally and climate security research specifically, methodologically tight explanation of naturally caused armed conflict still leaves much to be desired. In this article we unpack the black box of the climate-security nexus and advance causal modelling of armed conflict. To infer effects of natural causes on armed conflict outcomes, we apply recent advances in causal methods to conflict outcomes that have been non-experimentally observed across Iraqi municipalities. Retrieval of an entire empirical causal structure of climate-conflict pathways allows us to corroborate the existence of a cause-and-effect relationship between climatological, environmental, and demographic variables and armed conflict. We confirm that soil temperature, population density, and variability of latent energy cause an increase in fatalities, while rice production decreases fatalities. We discuss our findings, their limitations, and future research directions, and reflect on their relevance for policy interventions.

Background: Despite scientific advances, the management of procedural pain in neonates remains suboptimal. Applying adequate therapy to control pain during the neonatal period is a moral and ethical act. In recent decades, ample evidence has accumulated regarding the risks, associated with both untreated pain and the use of more aggressive analgesic therapy. Thus, the emphasis in neonatal clinical practice is on non-aggressive pain management techniques, including homeopathic agents. The efficacy and safety of homeopathic agents for reducing procedural pain in neonates is the subject of the present study. Materials and Methods: Healthy full-term newborn babies with an average age of 72-84 hours were included. They were divided into three study groups: group (A) – not anesthetised, /n= 67/, group (B) – anesthetised with Arnica D30 /n=40/ and group (C)- anesthetised with Sol.Glucose 25% /n=40/. The severity of the pain was assessed using the multimodal - Neonatal Infant Pain Scale (NIPS) and the unimodal - Neonatal Facial Coding System (NFCS) scale. Assessments were done 30s before, 30 seconds after, and 5 minutes after the painful stimulus caused by the heel prick. Heart rate, transcutaneous oxygen saturation, respiratory rate and blood pressure were examined at the same intervals. The results obtained were processed statistically by descriptive analysis and ANOVA at a significance level of p&lt; 0.05. Results: 5 minutes after heel prick both scales showed a statistically significant lower score in those given Arnica D30, compared to those who received Sol.Glucose 25%. When monitoring the physiological indicators, we found a significant increase in the heart rate 30 seconds after the procedure.5 minutes after the heel prick we recorded significantly respiratory rate and systolic blood pressure in all three groups compared to pre-procedural values. Conclusions: Arnica D30 has better analgesic effects compared to Sol.Glucose 25% for newborn babies after heel prick tests.

Approximately 300 million non-cardiac surgeries are performed each year. Perioperative mortality after non-cardiac surgery is estimated at 2% in patients over 45 years of age . Half of these deaths are attributable to cardiovascular complications, and most to perioperative myocardial infarction (MINS). Before introduction of cardiac biomarkers the diagnosis of postoperative myocardial infarction was based on symptoms and electrocardiographic changes and its incidence was largely underestimated. The incidence of MINS when standard troponin assay is used ranges between 8 and 19% but increases to 20-30% whit high sensitivity troponin assays. Higher troponin values sugegsting myocardial injury , both with or without definite diagnosis of myocardial infarction, are associated with increased 30 day and 1-year mortality . Diagnostic and therapeutic strategies are reported .

Malnutrition problems are related to diets that lack one or more essential elements, which it is extremely important to food enrichment to improve the content of compounds effective for health. The objective of this study is to evaluate the effect of the addition of Ca2+, K+ and Mg2+ on the induction of nutraceutical quality in grafted tomatoes grown in the NFT (Nutrient Film Technique) system. In the experiment, two factors were evaluated: plants with and without grafting and the foliar application of 10 ml L−1 Ca2+, 4 ml L−1 K+ and 10 ml L−1 Mg2+ cations separately for each case, in addition to the control. The treatments were evaluated using a completely randomized design, with 5 repetitions per treatment. The interactive effects between grafting and foliar application of Ca2+ induced a greater content lycopene, β-carotene and total flavonoids in fruits of tomato. The interactive effects between the graft and the Mg2+ foliar applications obtained the best results in the phenol content. As regards, capacity DPPH and ABTS, the graft decreased concentration, increasing the content of these through foliar applications of calcium. Regarding the enzymatic variables, graft factor increased activity catalase, glutathione peroxidase and phenylalanine ammonium lyase, obtained the best results graft interaction and foliar application of calcium and magnesium. The results obtained demonstrate the influence of the use of grafts and foliar applications of cal-cium and magnesium as tools that could improve the nutraceutical quality content of tomato crop

Metformin is an oral antidiabetic agent with antimicrobial properties, excreted in an active and unmetabolized form. Like some non-antibiotic drugs, subinhibitory concentrations of metformin may contribute to the expression of microbial resistance in wild-type strains. This work aimed to evaluate the biofilm formation of Pseudomonas aeruginosa TGC04 exposed to 100 and 200 µg/mL of metformin, varying the Chemical Oxygen Demand (COD) and flow regime. Biofilms were quantified after 2 and 24 hours, observing reductions and increases in biofilm growth around 13 and 64%, respectively. The greatest biofilm growth occurred in cells exposed to 200 µg/mL of metformin. Both the flow regime and COD concentration were important for the development of the biofilm, whose cells were mostly weakly to moderately adhered. The study provides evidence that in polluted aquatic systems with turbulent regimes, the inhibitory concentration of metformin promoted the least disturbances to the biofilm.

In this review, we will cover a general overview of the current panorama on lncRNAs with an actual or potential role as biological markers in cancer. We will discuss examples of multi-omics approaches that integrates information on somatic aberrations, gene expression and epigenomics, with the scope of providing a more comprehensive view of the functional impact of lncRNA profiles and how these paradigm can be exploited for the discovery and selection of lncRNAs with a functional role and their use as variables informing on progression and prognostic and help guiding the selection of therapeutic strategies for cancers. Finally, we propose a perspective for future evolution of the study of lncRNAs and the discovery of their functional and harnessing their potential to assist in clinical management of malignancies.

Small bowel non-Meckelian diverticulosis is a rare condition with only few published cases despite being described over 200 years ago. In the midst of the COVID-19 pandemic, studies suggested that a lot of patients may experience gastrointestinal manifestations. Intestinal symptoms could worsen the inflammation and infection associated with small bowel diverticulitis. Here, we present two cases: one with inflammation and rupture in a COVID-19 patient and the other as an asymptomatic detection. Furthermore, we provide a mini-review of the literature to emphasize the importance of considering this entity in the differential diagnosis of an acute abdomen.

This publication delves into the intricate world of human communication, extending beyond the realm of spoken and written language to explore the profound influence of non-verbal communication. Focusing on body language—comprising gestures, facial expressions, postures, and movements—it reveals the pivotal role it plays in conveying emotions, intentions, and psychological states. The rapidly evolving fields of neuroscience and cognitive science are investigating the neural mechanisms and cognitive processes that underpin the interpretation and utilization of these non-verbal cues. Notably, the amygdala's involvement in processing emotional facial expressions has provided a neurological foundation for our emotional understanding in non-verbal communication. Concurrently, cognitive psychology sheds light on how perception, attention, and memory influence our interpretation of non-verbal cues and communication strategies.In our modern, technologically advancing society characterized by global interconnectivity and cultural diversity, the significance of non-verbal communication, especially in digital and virtual contexts, is paramount. The transformation of non-verbal expression into digital symbols like emoticons and emojis raises questions regarding its ability to maintain authenticity and emotional understanding. This publication endeavors to comprehensively explore the fundamental role of body language and non-verbal communication in contemporary society. By integrating insights from psychology, neuroscience, social sciences, and digital technologies, it aims to elucidate the underlying mechanisms guiding non-verbal communication. Additionally, it delves into the implications of non-verbal communication across diverse domains, including interpersonal communication, the workplace, politics, advertising, and the virtual world.The research presented herein strives to offer a thorough understanding of interpersonal dynamics, relationships, and social behavior, with the goal of promoting the development of more effective, conscious, and ethically guided communication strategies. Ultimately, this analysis aspires to inspire further interdisciplinary research and reflection, addressing emerging challenges and fully leveraging the potential of non-verbal communication in modern society. This, in turn, guides our path towards a communication landscape that is more inclusive, authentic, and empathetic.

Although adult spontaneous (non-diabetic) hypoglycaemia is rare, its recognition is important for the preventative or curative treatment of the underlying cause. Establishing Whipple’s triad; low blood glucose, neuroglycopaenia and resolution of neuroglycopaenia on increasing blood glucose levels to normal or above, is essential to verify hypoglycaemia. Awareness that hypoglycaemia may occur in severely ill patients is important for its prevention. Further investigation in such cases is unnecessary unless another cause of hypoglycaemia is suspected. Patients are often asymptomatic and normoglycaemic at review. History of medication, self-medication, access to hypoglycaemic drugs, alcohol and comorbidity may provide aetiological clues. The investigation involves obtaining blood samples during symptoms for laboratory glucose measurement or provoking fasting or postprandial hypoglycaemia as directed by symptoms. If confirmed, insulin, c-peptide, proinsulin, beta-hydroxybutyrate are analysed in hypoglycaemic samples. These will classify hypoglycaemia due to non-ketotic hyperinsulinaemia, non-ketotic hypoinsulinaemia and ketotic hypoinsulinaemia and direct investigations to identify the underlying cause. There are, however, many pitfalls, which may mislabel healthy individuals as “hypoglycaemic” or misdiagnose treatable or preventable causes of spontaneous hypoglycaemia. Clinical acumen and appropriate investigations will mostly identify hypoglycaemia and its cause.

This paper presents ConF, a novel deep learning model designed for accurate and efficient prediction of non-coding RNA families. NcRNAs are essential functional RNA molecules involved in various cellular processes, including replication, transcription, and gene expression. Identifying ncRNA families is crucial for comprehensive RNA research, as ncRNAs within the same family often exhibit similar functionalities. Traditional experimental methods for identifying ncRNA fam-ilies are time-consuming and labor-intensive. Computational approaches relying on annotated secondary structure data face limitations in handling complex structures like pseudoknots and have restricted applicability, resulting in suboptimal prediction performance. To overcome these chal-lenges, ConF integrates mainstream techniques such as residual networks with dilated convolutions and cross multi-head attention mechanisms. By employing a combination of dual-layer convolu-tional networks and BiLSTM, ConF effectively captures intricate features embedded within RNA sequences. This feature extraction process leads to significantly improved prediction accuracy compared to existing methods. Experimental evaluations conducted on a ten-fold publicly available dataset demonstrate the superiority of ConF in terms of accuracy, sensitivity, and other perfor-mance metrics. Overall, ConF represents a promising solution for accurate and efficient ncRNA family prediction, addressing the limitations of traditional experimental and computational methods.

Background: Chronic, non-cancer pain represents a serious public health and economic issue affecting approximately 20% of the global population. Chronic pain can affect many aspects of patient’s lives, including mental health, employment, and relationships. Current medical management is largely focussed on investigating and managing acute pain. Patients and clinicians are now increasingly aware of the potential benefits of combined treatments or complex interventions in alleviating chronic pain. These approaches include both physical interventions, such as exercise or yoga, as well as psychological support including cognitive behavioural therapy (CBT) and talking therapies. Methods: This study used network meta-analyses to explore the prevalence of complex interventions in pain management, and the effects of these interventions on quality of life, using outcome measures including intensity of chronic pain, assessment of functional disability and participant’s psychological state. Results: Psychological interventions were associated with improvements in pain intensity and depression. Exercise and manipulation technique-based treatments provided a statistically significant reduction in pain intensity. This effect was enhanced when exercise and CBT were combined. Mensendieck somatocognitive therapy (MSCT) plus standard gynaecological treatment (STGT) treatments appeared to have a better effect on chronic pain than multimodal exercise plus CBT treatment. Combined MSCT and STGT treatment, and multimodal exercise plus CBT treatments, reduced pain intensity, whilst MSCT+STGT treatments had a slightly better effect than exercise plus CBT treatment.Conclusions: Complex interventions have become more popular with patients as the risks associated with other interventions including surgery and pharmacological management have become better understood. These interventions can have a significant positive effect both on the physical and psychological health of patients. The analysis presented in this study suggests that further work is warranted in this area and that additional studies are required, both in more geographically diverse locations, and with larger cohorts.

Fermented food matrices, including beverages, can be defined as the result of the activity of complex microbial ecosystems where different microorganisms interact according to different biotic and abiotic factors. Certainly, in industrial production the technological processes aim to control the fermentation to place safe foods on the market. Therefore, if food safety is the essential prerogative, consumers are increasingly oriented towards a healthy and conscious diet driving the production and consequently the applied research towards natural processes. In this regard, the aim to guarantee safety, quality and diversify of products should be reached limiting or avoiding the addition of antimicrobials or synthetic additives using the biological approach. In this paper, following the recent re-evaluation of non-Saccharomyces yeasts (NSYs) has been re-viewed the bio-protectant and biocontrol activity with a particular focus on their antimicrobial power, probiotic features and promoting functional aspects. In this review, the authors would underline the contribution of NSYs in all food production chain and its role in the technological and fermentative features for their practical and useful use as biocontrol agent in food preparations.

The need to regulate the non-exhaust particulate emissions from vehicles has been discussed worldwide due to the toxicity to the human body as well as the atmosphere. In-depth studies have been conducted on precise analysis of the non-exhaust particulates, in particular, accurate measurement of tire-brake-road wear particles, and their proportion in the atmosphere. In this study, the influence of tire and road wear particles (TRWP) on particulate matter (PM) in the atmosphere was investigated through tire and PM samples. PM samples were collected from the atmosphere using a high-volume sampler equipped with a quartz filter. Additionally, polycyclic aromatic hydrocarbons (PAHs) and heavy metals in tire rubber were analyzed as markers by pyrolysis-gas chromatography/mass spectrometry (GC/MS), GC/MS, and inductively coupled plasma/mass spectrometry (ICP/MS). More vinylcyclohexene was detected than dipentene in the markers measured in the samples of tires equipped with vehicles driving on the road with the high-volume sampler installed, while more dipentene was detected in total suspended particles (TSP) samples. Among the PAHs measured in tire samples, pyrene exhibited the highest concentration. In TSP samples, benzo(b)fluoranthene showed the highest concentration. Among the heavy metals, zinc exhibited the highest concentration in all tire samples and calcium in TSP samples.

With the development of data science, more and more machine learning technologies have been designed to solve complicated and challenging real-world tasks containing a large volume of data. And many significant real-world datasets contain data in the form of networks or graphs. Graph Neural Networks is one of the powerful machine learning tools, which could provide a perfect solution to processing a large amount of non-Euclidean data. And because most bio information data in bioinformatics is in the non-Euclidean domain, Graph Neural Networks could then directly be applied to solve problems in bioinformatics. Much research has been done in the field of GNN, and there are also some surveys related to GNN and its applications. However, there has been little research focusing on GNN in bioinformatics, and we think in the future we could better utilize GNN in the field of biology, so we would like to write a literature review to help take a comprehensive look at GNN and their applications in the field of bioinformatics. In this paper, we would first introduce SOTA models in Graph Neural Networks, and second, introduce their applications in bio information. And then we would provide future directions of Graph Neural Networks in bioinformatics.

In this paper we use the additive thermodynamic formalism to obtain new bounds of the Hausdorff and box-counting dimension of certain non conformal hyperbolic repellers defined by piecewise smooth expanding maps on a $d$-dimensional smooth manifold $M$.

We suggest that the 14^th century scholar Nicholas of Autrecourt can be regarded as a precursor of the paraconsistent logics developed around 1950. We show how the Sorbonne licentiatus in theology provided in his few extant writings a refutation of both the principle of explosion and the law of non-contradiction, in accordance with the tenets of paraconsistent logics. This paves the way to the most advanced theories of truth in natural language and quantum dynamics.

We extend the standard solid-state quantum mechanical Hamiltonian containing only Coulomb interactions between the charged particles by inclusion of the (transverse) current-current diamagnetic interaction starting form the non-relativistic QED restricted to the states without photons and neglecting the retardation in the photon propagator. This derivation is supplemented with a derivation of an analogous result along the non-rigorous old classical Darwin-Landau-Lifshitz argumentation within the physical Coulomb gauge.

Although cancers account for over 16% of all global deaths annually, at present, no reliable therapies exist for most types of the disease. As protein folding facilitators, heat shock proteins (Hsps) play an important role in cancer development. Not surprisingly, Hsps are among leading anticancer drug targets. Generally, Hsp70s are divided into two main subtypes: canonical Hsp70 (E. coli Hsp70/DnaK homologues) and the non-canonical (Hsp110 and Grp170) members. These two main Hsp70 groups are delineated from each other by distinct structural and functional specifications. Non-canonical Hsp70s are considered as holdase chaperones, while canonical Hsp70s are refoldases. This distinct characteristic feature is mirrored by the distinct structural features of these two groups of chaperones. Hsp110/Grp170 members are larger as they possess an extended acidic insertion in their substrate binding domains. While the role of canonical Hsp70s in cancer has received a fair share of attention, the roles of non-canonical Hsp70s in cancer development has received less attention in comparison. In the current review, we discuss the structure-function features of non-canonical Hsp70s members and how these features impact on their role in cancer development. We further mapped out their interactome and discussed the prospects of targeting these proteins in cancer therapy.

On-farm research was conducted at Gouripur sub-district under Mymensingh district of Bangladesh during the boro (mid November-June) season in 2013-14 and 2014-15 to evaluate the performance of non-puddled rice cultivation with and without crop residue retention. The rice var. BRRI dhan28 was transplanted by two tillage practices viz., puddled conventional tillage (CT) and non-puddled strip tillage (ST) and at two levels of mustard residues, i.e., no residue (R₀) and 50% residue (R₅₀). The experiment was designed in a randomized complete block design with four replications. There were no significant yield differences between tillage practices and residue levels in 2013-14. But in the following year, ST yielded 9% more grain compared to CT leading to 22% higher BCR. Retention of 50% residue increased yield by 3% compared to no-residue, which contributed to 10% higher benefit-cost ratio (BCR). The ST combined with 50% residue retention yielded the highest grain yield (5.81 t ha^-1) which contributed to produce the highest BCR (1.06).