Since a few decades, the world has been facing severe global challenges with context to water, food, agriculture science, energy resources, healthcare, medicines, diseases, etc. One of the causes of these challenges is excessive human activities. So, there has arisen a necessity to tackle these challenges using sustainable solutions so as to minimize the effect of human interference. Nanotechnology (NT) has gained pace as a new technique that provides cost-effective, efficient, and eco-friendly solutions to such challenges. The advantages of the usage of NT have increased in every field of science. As compared to traditional methods, NT possesses wider use and benefits as it is designed at the nano levels and also keeps the environment clean. It is the science of tiny particles that has an important role to play in international efforts in sustainability. The innovation of NT is revolutionary and therefore subsequently will cover a wider space in terms of scientific achievements. Technology saves time, money, and human resources. This paper discusses and highlights the usage of NT with respect to its application, knowledge, and sustainable development. It also gives a broad view of the approaches, properties, and applications of NT in various sectors including the treatment of water bodies, agricultural science, drug delivery systems, medicines, and energy saving.

Introduction Tuberculosis is common in Pakistan. Due to various factors including socioeconomic factors, compliance is poor to anti-tuberculosis drugs, leading to resistance. We aim to determine the prevalence of Multidrug resistance (MDR) tuberculosis in Pakistani population.Methods A prospective observational study was conducted from April 1, 2019, to December 31, 2019, in the Pulmonology department of a tertiary care hospital in Pakistan. Culture and sensitivity were assessed using a sputum sample or, in cases of an absent sputum sample, from Broncho alveolar lavage.ResultsApproximately 71.3% percent patients who had tuberculosis were found to be resistant to Isoniazid and around 48.6% did not respond to Rifampin. Multi-drug resistant was found in 29.4% participants.ConclusionMulti-drug resistance tuberculosis is very prevalent in Pakistan, which may increase burden on health care system and may lead to various complications of tuberculosis.

Indoor dusts are collectively formed from anthropogenic and atmospheric activities. Particle matter 10 (PM10) is inhalable and causes significant inflammation by interaction with the pulmonary epithelial barrier. The mediators involved in bronchial epithelial cells response to dust are remined unknown. The air-liquid interface of our lung on chip model was exposed to indoor dust collected from highly polluted houses in Delhi, India. The media were collected after 4 days and cytokine levels were measured. We found that the concentration of IFN, IFNγ, Interleukin-6 (IL-6), IL1b, TNFa, and Granulocyte monocyte colony stimulating factor (GM-CSF) were significantly increased after exposure to indoor dust. IFN type I pathways were a major response from dust exposure. Further investigation is needed to determine the mechanism of action and targets of dust in bronchial epithelial cells.

Antimicrobial resistance (AMR) is a growing public health issue worldwide that affects the world economy. The concern associated with this issue increased during the COVID-19 pandemic. The misuse of antibiotics during the COVID-19 pandemic will have catastrophic implications for the control of AMR. In 2019, the coronavirus illness COVID-19 first appeared in China. COVID-19 infection is a surface-to-surface communicable disease. It is considered the most vital global health disaster of the century. It has rapidly spread around the world and is the greatest challenge for humankind. This chapter discusses the origin, symptoms, transmission, treatment, and recommendations of the COVID-19 disease.

This hypothesis demonstrates that the efficiency of Loop-Mediated Isothermal Amplification (LAMP) for nucleic acid detection can be positively influenced by preconcentration of microbial cells onto hydrophobic paper surfaces. The mechanism of this model is based on the high attraction of microbes towards hydrophobic surfaces. Extensive studies have demonstrated that hydrophobic surfaces exhibit enhanced bacterial and fungal adhesion. The preconcentration approach by exploiting this inherent affinity of hydrophobic paper substrates enables the adherence of a greater number of target cells, resulting in a higher concentration of target templates for amplification directly from urine samples. In contrast to conventional methods, which often involve complex procedures, this approach offers a simpler, cost-effective, and user-friendly alternative. Moreover, the integration of cell adhesion, LAMP amplification, and signal readout within paper origami-based devices can provide a portable, robust, and highly efficient platform for rapid nucleic acid detection. This innovative hypothesis holds significant potential for point-of-care (POC) diagnostics and field surveillance applications. Further research and development in this field will advance the implementation of this technology, contributing to improved healthcare systems and public health outcomes.

Antimicrobial resistance is on the rise, and there aren't enough new treatments to combat it. This might send the modern world back to the pre-antibiotic age. The molecular hybrids of pyrazolo[3,4-b]pyridine and triazole have been designed, synthesized, and analyzed for their drug-like molecule nature and in vitro analyses for their inhibition potentials against S. Aureus and K. Pneumoniae. The compounds CY-R2-25 and CY-R2-28 have been identified as the high potential molecules in this series based on in vitro experiments. CY-R2-25 has zone of inhibition values of 15 0.82 and 14 0.7, whilst CY-R2-28 has the zone of inhibition values of 18 0.95 and 16 0.82 against S. Aureus and K. Pneumoniae, respectively. MIC and MIB values for CY-R2-25 and CY-R2-28 against S. Aureus and K. Pneumoniae are 0.25 and 0.5, respectively.

The development of potent antiviral agents is of utmost importance to combat the global burden of viral infections. Traditional antiviral drug development involves targeting specific viral proteins, which may lead to the emergence of resistant strains. To explore alternative strategies, we investigated the antiviral potential of antimicrobial peptidomimetic compounds. In this study, we evaluated the antiviral potential of short anthranilamide-based peptidomimetic compounds 1-17 against two viruses: Murine Hepatitis Virus 1 (MHV-1-single stranded RNA virus) which is a surrogate of human coronaviruses and Herpes Simplex Virus 1 (HSV-1-double stranded DNA virus). The half-maximal inhibitory concentration (IC50) values of these compounds were determined in vitro to assess their potency as antiviral agents. Compounds 11 and 14 displayed the most potent inhibitory effect with IC50 values of 2.38μM, and 6.3μM against MHV-1 while compounds 9 and 14 showed IC50 values of 14.8μM and 13μM, against HSV-1. Multiple antiviral assessments and microscopic images obtained through transmission electron microscopy (TEM) collectively demonstrated that these compounds exert a direct influence on the viral envelope. Based on this outcome, it can be concluded that peptidomimetic compounds could offer a new approach for the development of potent antiviral agents.

Coded aperture 3D imaging techniques have been rapidly evolving in the recent years. The two main directions of evolution are in aperture engineering to generate the optimal optical field and in development of computational reconstruction to reconstruct the object’s image from the intensity distribution with a minimal noise. The goal is to find the ideal aperture-reconstruction method pair and if not, to optimize one to match the other for designing an imaging system with required 3D imaging characteristics. Lucy-Richardson-Rosen algorithm (LR²A), a recently developed computational reconstruction method was found to perform better than its predecessors such as matched filter, Weiner filter, phase-only filter, Lucy-Richardson algorithm and non-linear reconstruction (NLR) for certain apertures when the point spread function (PSF) is a real and symmetric function. For other cases of PSF, NLR performed better than the rest of the methods. In this tutorial, LR²A has been presented as a generalized approach for any optical field along with MATLAB codes for reconstruction of any image when the PSF is known. The common problems and pitfalls in using LR²A has been discussed. Simulation and experimental studies for common optical fields such as spherical, Bessel, vortex beams and exotic optical fields such as Airy, scattered and self-rotating beams have been presented. From this study, it can be seen that it is possible to transfer the 3D imaging characteristics from non-imaging type exotic fields to indirect imaging systems faithfully using LR²A. The application of LR²A to medical images such as colonoscopy images and cone beam computed tomography images with synthetic PSF has been demonstrated. We believe that the tutorial will provide a deeper understanding of computational reconstruction using LR²A.

A refractive lens is one of the simplest, cost-effective and easily available imaging elements. With a spatially incoherent illumination, a refractive lens can faithfully map every object point to an image point in the sensor plane, when the object and image distances satisfy the imaging conditions. However, static imaging is limited to the depth of focus, beyond which the point-to-point mapping can be only obtained by changing either the location of the lens or the imaging sensor. In this study, the depth of focus of a refractive lens in static mode has been expanded using a recently developed computational reconstruction method, Lucy-Richardson-Rosen algorithm (LRRA). The technique consists of three steps. In this first step, the point spread functions (PSFs) were recorded along different depths and stored in the computer as PSF library. In the next step, the object intensity distribution was recorded. The LRRA was then applied to deconvolve the object information from the recorded intensity distributions in the final step. The results of LRRA were compared against two well-known reconstruction methods namely Lucy-Richardson algorithm and non-linear reconstruction.

Indirect imaging methods involve at least two steps, namely optical recording, and computational reconstruction. The optical recording process uses an optical modulator that transforms the light from the object into a typical intensity distribution. This distribution is numerically processed to reconstruct the object’s image corresponding to different spatial and spectral dimensions. There have been numerous optical modulation functions and reconstruction methods developed in the past years for different applications. In most cases, a compatible pair of optical modulation function and reconstruction method gives optimal performance. A new reconstruction method termed non-linear reconstruction (NLR) was developed in 2017 to reconstruct the object image in the case of optical scattering modulators. During the years, it was revealed that the NLR could reconstruct an object’s image modulated by an axicons, bifocal lenses and even exotic spiral diffractive elements, which generate deterministic optical fields. Apparently, NLR seems to be a universal reconstruction method for indirect imaging. In this review, the performance of NLR has been investigated for many deterministic and stochastic optical fields. Simulation and experimental results for different cases are presented and discussed.