In order to study the surface settlement law of subway tunnel engineering site overlying soft soil layer under the action of earthquake, ABAQUS finite element analysis software was used to study the surface settlement law of subway tunnel construction site overlying soft soil layer under the action of three different seismic waves, including El-Centro wave, Kobe wave, and artificial seismic wave with exceedance probability of 10%, based on the Dalian Metro Line 5 with overlying soft soil layer as the engineering background, and the law was analyzed theoretically. Then, the surface settlement law of tunnel top was studied based on El-Centro wave and soft soil parameters, and the sensitivity analysis of soft soil parameters on surface settlement of tunnel top was carried out by orthogonal test method. The results show that under earthquake action, the settlement of the strata within a certain range of the tunnel roof is significantly greater than that of the surrounding strata, forming a settlement trough with a width of about 8 to 20 meters. The width of the settlement trough under the El-Centro wave is the largest, about 19.6 meters, surpassing the artificially synthesized seismic waves with a probability of 10%, which is about 15.6 meters, while the width of the settlement trough under the Kobe wave is the smallest, about 8.5 meters. The ground surface within a range of about 20 meters above the tunnel roof is most strongly affected by the seismic waves and the special lithology of the overlying soft soil layer, and the settlement is the largest. The settlement law of the settlement trough in the overlying strata of the tunnel conforms to the Peck formula. Increasing the elastic modulus of the silty soil can reduce the settlement of the ground surface above the tunnel roof, increasing the Poisson's ratio of the silty soil will increase the settlement of the ground surface above the tunnel roof, increasing the cohesive force of the silty soil to 20 kPa will basically stabilize the settlement of the ground surface above the tunnel roof, and increasing the internal friction angle of the silty soil will basically not change the settlement of the ground surface above the tunnel roof. The sensitivity of the soft soil parameters to the settlement of the ground surface above the tunnel roof is in the order of Poisson's ratio, elastic modulus, cohesive force, and internal friction angle.

Gastrodia elata Bl., one of the well-known edible plants in China, belongs to the family of Orchidaceae. In recent years, the consumption rate of this plant as food supplements or health products is gradually rising in China. However, the traditional industrialization processing procedures (TP) for this plant was found to be too complicated and not friendly to the environment with time and energy consuming. Hence, we investigated whether the processing procedures could be simplified without affecting its overall chemical profile and anti-oxidation activity. In this experiment, a new processing procedure (NP) was designed for processing this plant, and the chemical compositions of the extract for Gastrodia elata produced by two different processing procedures were identified by UPLC-Q-TOF/MS. It was found that phenols and parisins were the most abundant chemical components for this extract. Among all the identified components, the contents of gastrodin and its citric acid derivatives were obviously higher than that of other components. Therefore, the contents of six gastrodin derivatives and ethanol soluble extract rate for Gastrodia elata produced by two different processing procedures, traditional and newly designed processing procedures, were further comparatively investigated for the validation of the applicability. The DPPH radical scavenging activities of the extract from Gastrodia elata produced by two different processing procedures were also investigated. The results demonstrated that the contents of gastrodin and p-hydroxybenzyl alcohol in all samples were slightly decreased in NP samples compared with that of TP samples (except batches of S3 and S6 samples), but no significant difference was observed between these two groups (p = 0.8273 for gastrodin and p= 0.2320 for p-hydroxybenzyl alcohol). Additionally, the total contents of parisins were also in a decreased trend in NP samples but with no significant difference when comparing with that in TP samples (p = 0.1721). The results for ethanol soluble extract rate also had the same situation (p = 0.1094). Taken together, it was suggested that the chemical profiles and contents of gastrodin derivatives and ethanol soluble extract rate for NP samples was not significant different to that of TP samples. The DPPH radical scavenging activity of the extract of Gastrodia elata produced with NP method was not significant different from that of TP samples. As a result, the industrial processing procedures for the preservation of this material plant could be simplified to a more time and energy saving procedure without changing the quality of the products, which is also consistent with the concept of green and sustainable industrial production.

The carbonation of industrial calcium-rich byproducts such as steel slag demonstrates significant potential for CO2 sequestration. This technique aids in reducing carbon emissions while also promoting waste recycling. Despite its advantages, gaps remain in understanding how steel slag characteristics and operational parameters influence the carbonation process, as well as the underlying mechanism of direct aqueous carbonation. We evaluated the carbonation performance of three types of steel slag at temperatures below 100°C using a gas–liquid–solid reaction system. The slag with the highest CO2 sequestration capacity was chosen for a systematic evaluation of the effects of operating conditions on carbonation efficiency. Thermodynamic analysis indicated that the reactivity of CaO and Ca(OH)2 with CO2 exceeded that of CaO•SiO2 and 2CaO•SiO2. Under conditions of 85°C, a particle size less than 75 μm, an initial CO2 pressure of 0.5 MPa, a liquid-to-solid ratio of 5 mL/g, and a stirring speed of 200 rpm, the steel slag achieved a sequestration capacity (K) of 283.5 gCO2/kg and a carbonation efficiency (ζCa) of 51.61%. Characterization of the slag before and after carbonation using X-ray diffraction, SEM‒EDS, thermogravimetric analysis, and Fourier transform infrared spectrometry confirmed the formation of new carbonates. Mechanistic analysis revealed that the rate-limiting step initially involved the mass transfer of CO2, transitioning to Ca2+ mass transfer as time progressed. Our research provides a viable technique for CO2 capture and a beneficial approach for reutilizing waste steel slag. Furthermore, solid residues after capturing CO2 have the potential for conversion into carbon-negative building materials, offering a sustainable strategy for steel companies and other enterprises with high carbon emissions.

To explore the forage quality of wild oat populations under different growth environments, the basic nutrient composition and forage quality of five wild oat populations in Israel were compared. Ash, crude protein, and soluble sugar content of oats were significantly (P<0.05) related to some forage quality and possible environment of population origin. Among them, the environmental factors of origin had significant effects on the indicators of ash, crude protein, and soluble sugars of oat straw, but less on the contents of crude fat, total phosphorus, and total potassium. Meanwhile, the annual rainfall and the number of days of rainfall in the country of origin greatly influenced the cellulose content. Finally, we investigated the similarity of feeding values of different populations using PCA analysis. The results showed that, in conclusion, the higher variability of wild oat populations may be a new possibility brought by feeding oats.