With the development of Internet technology, teachers are constantly seeking innovative teaching methods to match the potential of enhanced technology. Although many studies have been performed before , they aren’t enough in this field. The purpose of this paper is to explore innovative teaching designs and examine the impact of Internet-assisted English teaching of reading based on constructivism. The case is carried out in NO.9 middle school of Bengbu, a underdeveloped area of China, most of students aren’t interested in learning English .We compared Internet-assisted with traditional textbook literature methods to improve the reading proficiency of students, using a questionnaire survey,pre-test and post-tests comparisons. The result showed Internet-assisted English reading teaching is better than textbook. It can arouse students' interest and motivation,reading proficiency and exam result of students have been improved significantly, created a positive learning situation.

Animal-assisted interventions (AAI) use human-animal interactions to positive effect in various contexts including cancer care. This systematic literature review is the first part of a two-part paper series focusing on the research methods and quantitative results of AAI studies in oncology. We find methodological consistency in the use of canines as therapy animals, in the types of high-risk patients excluded from studies, and in the infection precautions taken with therapy animals throughout cancer wards. The investigated patient endpoints are not significantly affected by AAI, with the exceptions of improvements in oxygen consumption, quality of life, depression, mood, and satisfaction with therapy. The AAI field in oncology has progressed significantly since its inception and has great potential to positively impact future patient outcomes. To advance the field, AAI research in oncology should consistently improve the methodological design of studies, report data more completely, and focus on the therapy animal’s well-being.

People working in the field of Animal-Assisted Interventions (AAI) often state that they perceive animal welfare as a matter of paramount importance, nevertheless most of scientific literature focuses on the effectiveness of interventions from the user's perspective. Before focusing on animals’ management and welfare during the interaction with users, it would be important to ensure animal welfare during their “ordinary lives”. This article reports information and considerations about the management of donkeys involved in AAI in Northern Italy. Six facilities with several years of experience in Donkey-Assisted Interventions were visited for the purpose of an initial data collection regarding the management of donkeys involved in AAI. A general lack of knowledge regarding the nutritional needs of the donkey and a heterogeneity of practices in the field of its preventive medicine have been identified; the study also highlighted a need for efforts to create a more stimulating and enriched environment for animals involved in AAI. Some possible areas for improvement in the management of donkeys involved in AAI have been highlighted. Further studies are necessary to provide a more comprehensive picture of the welfare of donkeys involved in this context.

Animal-assisted interventions (AAI) are a unique class of complementary medical treatments that can improve a patient’s quality of life, both physically and psychologically. Part I of this two-paper systematic literature review series focused on the study methods and quantitative results of researchers in this field. We continue this in-depth review here in Part II by discussing the common theories associated with AAI in the context of cancer. Of all the factors at work in human-animal interactions, researchers explicitly cite compatible animal personality, physical touch, physical movement, distraction/entertainment, and increased human interaction as the mechanisms responsible for the positive clinical outcomes observed in AAI. In various combinations, these mechanisms group under broader theoretical frameworks that attempt to fully explain the AAI context as it relates to cancer care. The social support hypothesis and the conception of a human-animal bond are the most referenced overarching frameworks. The cognitive activation theory of stress, the science of unitary human beings, and the self-object hypothesis are also referenced. We briefly consider other relevant theories commonly noted in the human-animal interactions literature that have the potential to clarify aspects of cancer-related AAI. We also discuss the neurobiological transduction mechanisms needed to connect theoretical frameworks and their mechanisms directly to the observed clinical outcomes. To advance the field, researchers should consider overarching theories with testable hypotheses when designing studies, and use consistent terminology when reporting results. This review lays a foundation for progress towards a unified theoretical framework and for effective treatment of the whole cancer patient.

The emergence of Internet of Things (IoT) devices is revolutionizing healthcare. This dynamic healthcare environment relies on Internet of Healthcare Things (IoHT) and Internet of Medical Things (IoMT) technologies. Economic, social, and technological opportunities from the IoHT are transforming healthcare systems. This article covers the history, present condition, and future prospects of IoHT, as well as its topologies, platforms, services, applications, market trends, and solution types. It examines security issues, requirements, and a threat taxonomy, studying smart healthcare privacy and security. It explores future research and the challenges IoHT-based solutions face. International health rules and regulations based on the IoT and their social and economic effects on long-term development are also examined. Integrating IoMT into healthcare infrastructures enhances scalability, efficiency, reliability, and accuracy. Through communication networks and data-processing algorithms, IoMT creates smart hardware and software platforms that enhance decision-making. IoMT devices' low resources raise privacy and security concerns. Security and privacy issues are organised by healthcare IoMT adoption in this study. We give an extensive attack taxonomy against the IoMT infrastructure, encompassing devices, security mechanisms, and their pros and cons. Furthermore, it describes the privacy and security requirements for any unique security solutions against IoMT's multiple attack vectors. This article explains the complicated difficulties, security concerns, and future research pathways needed to safeguard and ensure the long-term expansion of these game-changing technologies in the healthcare ecosystem.

Dog Assisted Therapy is hypothesized to lower stress in children with Autism Spectrum Disorder (ASD) and children with Down Syndrome (DS), which may be visible on a physiological level. In this study, we measured Heart Rate Variability (HRV) and salivary cortisol of 20 children with DS or ASD at the beginning and end of 6 weekly sessions of Dog-Assisted Therapy. We found a decrease of cortisol levels during single sessions, but no overall effect after 6 sessions (6 weeks). The effect of Dog Assisted Therapy on the increase of HRV could not be confirmed. This study is one of the first to use physiological measurements to test the effects of DAT.

Not a lot is known about either death or the dying process. Politicians and many in the medical profession in the UK tend to shy away from interfering with it by not allowing euthanasia as an end of life option for the patient. This is the first paper in a series of two, comparing the situation in human medicine and veterinary medicine, in which euthanasia is well practiced for relieving suffering at the end of an animal’s life. This first part takes the form of a literature review including best practice around end of life care, its deficiencies and the need for assisted dying. Veterinary surgeons are well trained in the ethics of euthanasia and put it to good use in the best interest of their animal patients. In countries which have legalized physician assisted suicide for the terminally ill reporting indicates that it works well, without increases in involuntary euthanasia and most importantly without intimidation of the vulnerable. However, there is still an ever increasing tendency to overuse sedation and opioids at the end of life, which merits further investigation. With advances in medical science able to significantly prolong the dying process, patient autonomy demands a review of the law in the UK.

The aim of this study was to evaluate the clinical and radiographic outcomes of the All-on-4 technique in fully edentulous maxilla using R2GATE software for flapless, computer-guided surgery and immediate loading. Ten adult patients with fully edentulous maxilla, aged between 35 and 60 years, were included in the study between April 2021 and April 2022. The surgical procedure was performed under local anesthesia and followed the All-on-4 approach with immediate loading of implants using a screw-retained provisional acrylic resin prosthesis on the same day. Final prosthesis was delivered four months after the surgery. Clinical and radiographic outcomes were evaluated at four- and twelve-months post-operation. The study reported a 95% implant survival rate using the All-on-4 technique. The mean marginal bone level was recorded at 0.35 mm and 0.66 mm during the 4 and 12-month follow-up periods, respectively. Fixed provisional prosthesis fracture, abutment, and prosthesis screw loosening were the most frequent mechanical complications reported. Within the limitations of this study, the use of computer-guided surgery in the All-on-4 technique seemed to be a promising treatment option with high implant survival rates that may help reduce post-surgical discomfort and mechanical complications in the rehabilitation of the edentulous maxilla.

: The effect that the microstructure exerts on the TRIP phenomenon and on the mechanical properties in a multiphase steel was studied. Samples of an initially cold-rolled ferrite-pearlite steel underwent different intercritical annealing treatments at 750 °C until an equal fractions of austenite/ferrite was reached; the intercritical treatment was followed by isothermal bainitic treatments before cooling the samples to room temperature. Samples in the first treatment were heated directly to the intercritical temperature, whereas other samples were heated to either 900 or 1100 °C to obtain a fully homogenized, single phase austenitic microstructure prior to the conducting the intercritical treatment. The high temperature homogenization of austenite resulted in the decrease in its stability, so a considerable austenite fraction transformed into martensite by cooling to room temperature after the bainitic heat treatment. Most of the retained austenite transformed during the tensile tests, and as a consequence, the previously homogenized steels showed the highest UTS. In turn, the steel with a ferritic-pearlitic initial microstructure, exhibited higher ductility than the other steels and texture components that favor forming processes.

Electroless etching of semiconductors was elevated to an advanced micromachining process by the addition of a structured metal catalyst. Patterning of the catalyst by lithographic techniques facilitates the patterning of crystalline and polycrystalline wafer substrates. Galvanic deposition of metals on semiconductors has a natural tendency to produce nanoparticles rather than flat uniform films. This characteristic makes possible the etching of not only wafers but also particles with arbitrary shape. While it has been widely recognized that spontaneous deposition of metal nanoparticles can be used in connection with etching to porosify wafers, it is also possible to produced nanostructured powders. MACE can be controlled to produce (1) etch track pores with shapes and sizes closely related to the shape and size of the metal nanoparticle, (2) hierarchically porosified substrates exhibiting combinations of large etch track pores and mesopores, and (3) nanowires with either solid or mesoporous cores. This review discussed the mechanisms of porosification, processing advances and the properties of the etch product with special emphasis on the etching of silicon powders.

This is the second of a series of two papers comparing the end of life issues in human and veterinary medicine. We outline the main differences between human and animal patients such as patient communication, finance and ‘conflicts of interest’ between animal, owner and veterinarian. We discuss striking similarities between human and veterinary issues such as assessing quality of life and the primary role of the attending veterinarian or doctor being the welfare and care of the patient. This paper takes the form of an ethical argument in favour of allowing euthanasia in human medicine, by providing insights into end of life issues for humans from an independent veterinary perspective. Veterinary surgeons are well trained in the ethics of euthanasia and put it to good use in the best interest of their animal patients. Doctors in the UK are limited and unwilling to put forward a case for the option of euthanasia for those patients who face a slow and agonizing death. With advances in medical science being able to significantly prolong the dying process, autonomy for the patient demands a review of the law regarding patient choice in the UK.

Background: We assess locoregional drug targeting effectiveness of intraoperative (IO) cryoprobe-assisted injection of blue dye (BD) and cytotoxic-tracer mixture (TTM), in VX2 tumor model, and its translational value to cryo-assisted breast tumor surgery with BD alone. Methods: Under computed tomography (CT) guidance, we injected two ml TTM in five aliquots in the margin of 16 frozen or normothermic VX2 tumors. We evaluated the IO and post-operative drug targeting and therapeutic efficacy in tumor-host interface (T-HI) by CT, gross examination, and histopathology. In twenty-six T1 to T4 primary breast cancer (BRCA) we performed ultrasound-guided (US) cryoprobe-assisted tumor freezing, BD guided lymphatic mapping, and surgery. We evaluated, IO and in freshly resected specimen, BD distribution pattern in T-HI, lymph node(s), breast parenchyma, and resection cavity. Results: Fluids-impervious frozen VX2 or breast tumor transported drug(s) an arc-like pattern at T-HI regardless of freeze dose, number of freeze-thaw cycles, drug dose fractionation, tumor characteristics or dimensions. During melting, TTM spread within fifty percent VX2 tumor mirrored that of T-HI; it was massive in normothermia. In VX2 twenty percent focal margin necrosis at pathology coincided with CT gap; in both studies, BD dose-staining spread in T-HI and tumor was linear. Eighty-four patients had one to twelve stained axillary lymph nodes; sixty-nine percent and all respectively, had another quadrant and resection cavity stained. Conclusion: Intraoperative freezing-assisted drug delivery and targeting techniques during cryoablation of VX2 tumor translate successfully to locoregional BD targeting, lymphatic mapping during cryo-assisted surgery of breast cancer.

We aimed to assess the prevalence, content structure and psychological comorbidity of PIU in Russian adolescents. In addition, the design of our research provided an opportunity to compare demographic and psychological patterns of different forms of PIU: generalised (PIUgen) and specific – problematic video game use (PUgame) as well as problematic social media use (PUsocial). Methods: This is a one-stage cross-sectional observational study of school sampling in three major Siberian cities. A total of 4514 schoolchildren aged 12-18 (mean age 14.52±1.52 years) were surveyed. Chen Internet Addiction Scale, Game Addiction Scale for Adolescents”, and The Social Media Disorder Scale were used to identify PIU and its types. Results: The prevalence of PIUgen among adolescents in Central Siberia was 7.2%; the prevalence of PUgame was 10.4%; the prevalence of PUsocial was 8.0%. The results of structural equation modelling, as well as the correlation analysis data, suggest two possible patterns of psychosocial problems with PIU – the first one characteristic of both PIUgen and PUsocial, the second one, significantly different, – of PUgame. Conclusions: Urban adolescents in Central Siberia do not differ significantly from their Asian and European peers. Our findings support the concept of rejecting the term “generalised PIU” as a single psychological construct.

A large number of smart devices (things) are being deployed with the swift development of Inter- net of Things (IOT). These devices, owned by different organizations, have a wide variety of services to offer over the web. During a natural disaster or emergency (i.e., a situation), for example, relevant IOT services can be found and put to use. However, appropriate service matching methods are required to find the relevant services. Organizations that manage situation responses and organizations that provide IOT services are likely to be independent of each other, and therefore it is difficult for them to adopt a common ontological model to facilitate the service matching. Moreover, there exists a large conceptual gap between the domain of discourse for situations and the domain of discourse for services, which cannot be adequately bridged by existing techniques. In this paper, we address these issues and propose a new method, WikiServe, to identify IOT services that are functionally relevant to a given situation. Using concepts (terms) from situation and service descriptions, WikiServe employs Wikipedia as a knowledge source to bridge the conceptual gap between situation and service descriptions and match functionally relevant IOT services for a situation. It uses situation terms to retrieve situation related articles from Wikipedia. Then it creates a ranked list of services for the situation using the weighted occurrences of service terms in weighted situation articles. WikiServe performs better than a commonly used baseline method in terms of Precision, Recall and F measure for service matching.

Recent technological advances, including capsule endoscopy (CE) and balloon-assisted endoscopy (BAE), have revealed that small intestinal disease is more common than previously thought. CE has advantages including, high diagnostic yield, discom-fort-free, outpatient basis, and physiological images. BAE enabled endoscopic diagnosis and treatment in the deep small bowel. Computed tomography (CT) enterography with negative oral contrast can evaluate masses, wall thickening, and narrowing of the small intestine. In addition, Enhanced CT can detect abnormalities outside the gastrointestinal tract that endoscopy cannot evalu-ate. Each modality has its advantages and disadvantages, and a good combination of multiple modalities leads to an accurate diagnosis. As a first-line modality, three-phase enhanced CT is preferred. If CT shows a mass, stenosis, or wall thickening, a BAE should be selected. If there are no abnormal findings on CT and no obstructive symptoms, CE should be selected. If there are sig-nificant findings in the CE, determine the indication for BAE and its insertion route based on these findings. Early diagnosis of small intestinal tumors is essential for favorable outcomes. For early diagnosis, the possibility of small bowel lesions should be considered in patients with unexplained symptoms and signs after examination of the upper and lower gastro-intestinal tract.

Objectives: Chylothorax is a relatively rare condition of lymphatic fluid accumulation in the thoracic cavity due to a leakage from the thoracic duct or its tributaries. Patients present with dyspnea, malnutrition, and immunosuppression. Treatment can be conservative or surgical, depending on etiology and clinical course. The optimal management algorithm for chylothorax is still controversial. Methods: This is a retrospective study of all patients with chylothorax treated at our Department of Thoracic Surgery during the 10-year period. Results: A total of 14 patients were identified for the study. Nine patients had chylothorax after lung or esophageal cancer surgery. Four patients had chylothorax in advanced lymphoma. One patient had chylothorax after blunt chest trauma. A conservative approach was initiated in most patients (92%), including pleural drainage, nil per mouth, total parenteral nutrition, and somatostatin 0.1 mg bid subcutaneously. Surgical treatment was indicated in patients with thoracic drain production >800 mL per day beyond the fifth day of treatment and those with blunt thoracic trauma. Two patients had thoracic duct ligation via right-sided thoracotomy, and five patients had video-assisted thoracoscopic thoracic duct ligation with the immediate arrest of chylous leakage. Conclusion: Chylothorax should be treated conservatively initially. Surgical treatment should not be delayed in case of failure beyond the fifth day. In our series of patients, a video-assisted thoracoscopic approach for thoracic duct ligation proved to be minimally invasive, highly efficient, and well tolerated by patients and, therefore, should be the preferable route of surgical treatment.

Silicon-based thin-films and nanostructures are of paramount importance in a wide range of applications, including microelectronics, photovoltaics, large area sensors, as well as biomedicine. The wide accessibility of silicon and its relatively low cost have driven a continuous improvement of the technology based on this element. Plasma technology has been widely used for the synthesis of coatings and nanostructures based on silicon. Moreover, it has given a fundamental contribution for continuously improving the control of the physicochemical properties of silicon-based materials, and for allowing the synthesis of nanometric structures with well-defined shape and morphology. In this work, we have reviewed the most interesting developments of plasma-assisted processed for the synthesis of Si-based materials, both inorganic and organic, in the last five years. A special attention has been given to the new techniques, or modifications of already existing ones, that open new possibilities for the synthesis of materials with new properties, as well as nanostructures with novel characteristics.

Conventional phenotyping breeding approaches for vegetable crops like Solanaceae, Bulb, Root crops, have made a significant contribution by developing many varieties. Despite this, conventional phenotyping approaches are not sufficient due to the longer time taken to develop a variety, low genetic gain, environmental factors and some other externalities that affect the phenotype-based selection. To address the challenges of conventional phenotype, a new recent method of high throughput phenotyping (HTP) is considered a promising tool. The development of high-throughput phenotyping technology began in the preceding decade as advancements in sensor, computer vision, automation, and advanced machine learning technologies. HTP platforms are being utilized to undertake non-destructive assessments of the complete plant system in a range of crops. HTP provides the precise measurements and suggests the collection of high-quality and accurate data which is necessary for standardizing phenotyping for the collection of genetic dissection and genomic assisted breeding such as genome-wide association studies (GWAS), linkage mapping, marker-assisted selection (MAS), genomic selection (GS). The remainder of this chapter discusses how high-throughput phenotyping technologies can be used in genomic-assisted breeding for vegetable crops

Objective: The study aimed to explore the experiences of women undergoing Assisted Reproductive Technologies namely; Invitro Fertilization and Intracytoplasmic Sperm Injection at the Finney Hospital and Fertility Centre, New Bortianor, Ghana. Method: A qualitative research design was employed to analyse and describe the experiences of the women seeking Assisted Reproductive Technologies. Fifteen women were invited and interviewed using a semi-structured interview guide. The responses were transcribed verbatim and analysed using content analysis. Results: Three themes emerged from the study: the women’s experiences, challenges and the roles and contributions of significant others. The women were anxious, stressed-up, exhausted and financially burdened. Spouses and health professionals played significant roles by providing social, emotional and financial support for these women. Significant others such as spouses and close relatives were supportive and provided encouragement to the women. Conclusion: The experiences of women undergoing Assisted Reproductive Technologies are multi-dimensional. Thus psychosocial intervention as part of ART services with health insurance cover may be client-centered and more appropriate for these group of women.

Aim: To develop an index for quantitative assessment of the upper limb motor function in children with cerebral palsy before and after robot-assisted therapy. Method: An upper limb motor function index was developed using kinematic, surface electromyography and three-axis inertial measurements unit data collected from 15 children with cerebral palsy (CP) and 15 typically developed children. Children with CP underwent 18 robot-assisted therapy sessions with the REAplan device. All children were evaluated, using kinematic data from the REAplan, electromyography and three-axis inertial measurements unit readings from its accelerometer. A principal component analysis was conducted to produce an evaluation index, which is able to detect the deviation from the upper limb motor function of typically developing children group. Children with CP were evaluated twice before and after the intervention with Box and Blocks test and Finger-To-Nose test. The discriminative and concurrent validity of the upper limb motor function index were investigated. Results: The upper limb motor function index was higher in children with CP post therapy (p<0.001). Finger-To-Nose test values improved after robot-assisted therapy (p<0.03). A weak but positive correlation was observed between upper limb motor function index and clinical tests (r=0.012, p=0.95 and r=0.13, p= 0.54 for Box and Blocks test and Finger-To-Nose test respectively). Interpretation: The upper limb motor function index successfully differentiated between the typically developing children and children with CP and was effective in assessing the improvement of the upper limb motor function after robot-assisted therapy. The upper limb motor function index could be extended to assess and monitor rehabilitation therapies of other populations, such as those with stroke and Parkinson’s disease.

Nowadays, people live amidst the smart home domain, business opportunities in the industrial smart city and health care, though, along with concerns about security. Security is central for IoT systems to protect sensitive data and infrastructure, whilst security issues become increasingly expensive, in particular in Industrial Internet of Things (IIoT) domains. Nonetheless, there are some key challenges for dealing with those security issues in IoT domains: Applications operate in distributed environments such as Blockchain, varied smart objects are used, and sensors are limited in what comes to machine resources. In this way, traditional security does not fit in IoT systems. In this vein, the issue of cyber security has become paramount to the Internet of Things (IoT) and Industrial Internet of Things (IIoT) in mitigating cyber security risk for organizations and end users. New cyber security technologies / applications present improvements for IoT security management. Nevertheless, there is a gap on the effectiveness of IoT cyber risk solutions. This review article discusses the, trends around opportunities and threats in cyber security for IIoT.

An investigation was carried out to study the effects of television and internet on academic performance of senior secondary schools students in Rigachukun Inspectorate of Kaduna state. A well structured and designed questionnaire was adopted in eliciting information from the respondents. The respondents were sampled from schools within Kaduna state. The information obtained showed that the percentage of senior secondary school students who made use of internet for academic purpose was as much as those who could not operate a computer or even browse the internet. Good number of students applied internet mostly through phones and computer with internet access in solving their assignment. A larger percentage of students devoted their time to watching non-educative programs on television, even though it was discovered that some of them also watch educative programs. Positive impacts of television and internet are however obscuring and not glaring. Investigation carried out revealed that students in senior secondary schools need to be sensitized and oriented on how they can derive the best from internet and television. Schools should be encouraged in using television and internet as an instrument of learning and teaching.

This paper advances privacy theory through examination of online shaming, focusing in particular on persecution by internet mobs. While shaming is nothing new, the technology used for modern shaming is new and evolving, making it a revealing lens through which to analyze points of analytical friction within and between traditional conceptions of privacy. To that end, this paper first explores the narrative and structure of online shaming, identifying broad categories of shaming of vigilantism, bullying, bigotry and gossiping, which are then used throughout the paper to evaluate different angles to the privacy problems raised. Second, this paper examines shaming through three dominant debates concerning privacy - privacy’s link with dignity, the right to privacy in public places and the social dimension of privacy. Certain themes emerged from this analysis. A common feature of online shaming is public humiliation. A challenge is to differentiate between a humbling (rightly knocking someone down a peg for a social transgression) and a humiliation that is an affront to dignity (wrongly knocking someone down a peg). In addition, the privacy concern of shamed individuals is not necessarily about intrusion on seclusion or revelation of embarrassing information, but rather about the disruption in their ability to continue to participate in online spaces free from attack. The privacy interest therefore becomes more about enabling participation in social spaces, enabling connections and relationships to form, and about enabling identity-making. Public humiliation through shaming can disrupt all of these inviting closer scrutiny concerning how law can be used as an enabling rather than secluding tool.

Primary spontaneous pneumothorax (PSP) is a pleural disease that abruptly affects healthy adolescents and young adults, representing a common thoracic disorder in this age group. This study aimed to investigate the necessity of preoperative chest tube insertion in patients with PSP and to re-evaluate current clinical treatment approaches. A retrospective review of medical records was conducted for children and young adults aged 14–30 years, diagnosed with PSP and who underwent Video-assisted thoracoscopic surgery (VATS) between January 2016 and December 2022 at Wonju Severance Christian Hospital. Patients were retrospectively divided into two groups based on their initial treatment: chest tube insertion and non-chest tube insertion. Clinical data including demographics, treatment details, and outcomes were collected and compared. Total 128 cases of PSP were included in the study. The total length of hospital stay was significantly shorter in the non-chest tube group (p=0.000), which was attributed to the omission of pre-operative chest tube insertions. No significant differences were observed between the two groups in terms of postoperative complications or recurrence rates. In cases of young patients with PSP, omitting pre-operative chest tube insertion may be a viable option if the patient is scheduled for VATS.

(1) Background: the popularity of rabbits has increased during the last decades and became the third common companion animals in EU. Their participation in animal assisted interventions (AAI) is growing. It is highly important to ensure the well-being of the animals in AAI. Whereas the needs and the advantages of people involved in AAI are becoming more and more evident, the needs of animals are not clearly determined, it is required not to affect the animals negatively. Those animals who are used for AAI purpose need toneed to be transported regulrarly; (2) Methods: the rabbits stress – caused by transportation – were measured by non-invasive faecaesl cortisol metabolite (FCM) analysis. 18 animals were involved in the study and experienced a 30 minutes transportation every second day duringfor two weeks (total 6 times) while 128 samples were collected; (3) Results: rabbits –could handle the transportation procedure by the first and second time but subsequently the stress hormone metabolites in faeces samples increased significantly regardless of the offered treatments (hay, carrot and apple) during the carriage. (4) Conclusions: those owners who use rabbits for Animal Assisted Intervention purpose need to take into account that transportation itself is a stressful experience for the animals.

Deep sky observation is a fascinating activity, but it requires favourable conditions in order to be fully appreciated. Complex equipment, light pollution around urban areas, lack of contextual information often prevents newcomers from making the most of their observations, restricting the field to a niche expert audience. In this paper, we show how combining the usage of smart telescopes with eXplainable Artificial Intelligence makes the practice of astronomy even more accessible and educative, and how it has been applied during outreach sessions In Luxembourg Greater Region.

Excitation of the acoustic field leading to the Blaha effect affects the plasticity of the material significantly in ultrasonic vibration-assisted forming. In a micro-forming field, the effects are more significant in the deformation in surface of materials [1]-[3], in which reduction of the surface roughness based on the increasing of plastic deformation of surface asperity was effective [4]. On the other hand, the effect on deformation behavior of the bulk region indicted reduction in the yield stress of materials, and not only acoustic effect [5], but also impact effect is found to generate a large amount of dislocation and produce plastic deformation [6][7]. However, the effect on the bulk is more significant as that on the surface. Differences in the effect on the surface and the bulk are not clarified. In this study, the mechanism of the deformation in the surface of the material with ultrasonic vibration assistance is investigated and compared with that in the bulk. Forging tests using a newly developed ultrasonic vibrator were carried out on pure Cu foils with various process conditions. The longitudinal vibration frequency of the ultrasonic transducer is 60∓2kHz, and the vibration amplitude is in an adjustable range of 0~10μm. Forging test was carried out at different initial stress, specimen size and amplitude. The difference in acoustic softening and impact effects on the surface and the bulk was discussed.

The preparation of new materials based on starch for the development of biodegradable packaging is increasing, however, the poor properties of this biopolymer for this application causes an area of opportunities for the improvement of water vapour permeability (WVP), mechanical properties, thermal properties, hydrophilicity, water absorption, among others. Hence, starch has been combined with other polymers such as polyvinyl alcohol, which has shown an improvement in the mechanical properties of starch, also, the use of clays suggests that the properties of response to water can be improved. Therefore, in this work, the preparation and characterization of starch-PVA-nanoclay films prepared by solvent casting is reported. The results obtained suggest that the sonication of nanoclay is necessary to reach a good dispersion, which promotes a strong interaction among starch-PVA-nanoclay. In addition, the properties of WVP and mechanical properties of films improved with incorporation of nanoclay, the concentration of 0.5% w/v of nanoclay showed to be the best concentration due to concentrations of 1.0 and 1.5% w/v were poorer than 0.5% w/v. Accordingly, the successful incorporation of nanoclays into the matrix starch-PVA suggests that this material is a good candidate for use as packaging.

Cannabis is a flowering plant that has long been used for medicinal, therapeutic, and recreational purposes. Cannabis contains more than 500 different compounds, including a unique class of terpeno-phenolic compounds known as cannabinoids; Δ9-tetrahydrocannabinol (THC) and cannabidiol (CBD) are the most prevalent cannabinoids and have been associated with the therapeutic and medicinal properties of the cannabis plant. In this paper, continuous flow microwave assisted extraction (MAE) is presented and compared with other methods for commercial cannabis extraction. The practical issues of each extraction method are discussed. The main advantages of MAE are: continuous-flow method which allows for higher volumes of biomass to be processed in less time than existing extraction methods, improved extraction efficiency leading to increased final product yields, improved extract consistency and quality because the process does not require stopping and restarting material flows, and ease of scale-up to industrial scale without the use of pressurised batch vessels. Moreover, due to the flexibility of changing the operation conditions, MAE eliminates additional steps required in most extraction methods, such as biomass decarboxylation, winterisation, which typically adds at least a half day to the extraction process. Another factor that sets MAE apart is the ability to achieve high extraction efficiency even at the industrial scale. Whereas the typical recovery of active compounds using supercritical CO¬2 remains around 70-80%, via MAE up to 95% of the active compounds from cannabis biomass can be recovered at the industrial scale.

Rice (Oryza sativa L.) supplies nourishment to about half of the population of the world's inhabitants. Of them, more than 2 billion people suffer from "hidden hunger" in which they are unable to meet the recommended nutrients or micronutrients from their daily dietary intake. Bio-fortification refers to developing micronutrient-rich diet foods using traditional breeding methods and modern biotechnology, a promising approach to nutrition enrichment as part of an integrated strategy for food systems. To improve the profile of rice grain for the biofortification related traits, understanding the genetics of important biofortification traits is required. Moreover, these attributes are quantitative in nature and are influenced by several genes and environmental variables. In the course of past decades, several endeavours such, as finding the important quantitative trait loci (QTLs) for improving the nutrient profile of rice seeds were successfully undertaken. In this review, we have presented the information regarding the QTLs identified for the biofortification traits in the rice.

This research was presented the special designed microfluidic device generated for sperm separation based on assumption of different surface electrical charged of sperms X and Y. However, to avoid ethical problem, the microfluidic chip has been tested with the mimic electrical charged particles, TiO₂-coated Polystyrene beads, (TiO₂-coated Ps-beads), instead of spermatozoa. The work has been separated into three main parts. Firstly, the simply but efficient fabrication of negatively charged TiO₂-coated Ps-beads has been presented. In addition, various characterization techniques such as X-ray diffraction (XRD), Tungsten Scanning Electron Microscopy (W-SEM) with energy-dispersive X-ray spectroscopy (EDS) mode, and X-ray Absorption Spectroscopy (XAS), have been reported in this work to elucidate the reasons behind the persistence of negatively charged on the surface of TiO₂-coated Ps-beads. Results show that the fabricated TiO₂-coated Ps-beads was partly coated in the mixed forms of amorphous Ti⁴⁺ and had caused a negatively charge to appear on the surface after fabrication and had sustained its electrical charged for long. Secondly, process of simulation and fabrication of microfluidic device was presented. Finally the negatively charged TiO₂-coated Ps-beads were tested in this microfluidic devices. For design of microfluidic devices integrated with a couple of microelectrodes, the simulated structures were fabricated by photolithographic technique and tested with the Ps-beads. Percentage of validation for Ps-beads separation indicated that the 100 mm-distance-between-electrodes microfluidic device exhibits to be the highest performance prototype at 86.96%. For further confirmation, another model so called the single path prototype has been established. It is confirmed by 92.59% of validation for the utilization of the device. The successfully designed microfluidic devices can be examined with actual spermatozoa later. Furthermore, process to fabricate the negatively charged TiO₂-coated Ps-beads can be established as testified samples for development of other microfluidic devices.

The new coronavirus SARS Cov2 disease from 2019. (COVID-19), started as a cluster of unexplained pneumonia cases in Wuhan in December 2019, has spread globally and caused a serious public health threat. People were scared due to the COVID-19 cases that were rapidly increasing all over the world and the quick changes in how people lived. The COVID-19 pandemic has affected various aspects of life, one of which is the increased use of the internet, especially social media platforms. Past research has clearly linked a pandemic with signs of stress, depression, anxiety, and suicide thoughts, as well as with excessive internet use. The findings of research conducted around the world indicate that the higher the level of stress associated with the COVID-19 pandemic in an individual, the greater the tendency to develop an addiction to the internet. The aim of this paper was to provide a brief overview of the available scientific findings on the impact of the COVID-19 pandemic on mental health and internet addiction. Methods: A sweep through available literature was performed using the database Medline via the PubMed interface for articles written in English, using keywords and MeSH terms "Internet addiction", "mental health" and "COVID-19". Results: With insight into the scientific literature on COVID-19, mental health, and internet addiction, we have concluded that during the COVID-19 pandemic, time spent on the internet increased. Conclusion: Additionally, due to reduced social activities, above mentioned consequently led to internet addiction and thus to psychological distress, increased loneliness and depression.

The Internet has become an essential tool for adolescents. It is part of their social integration within peers and supports their identity construction. The Internet can also become a source of addiction; especially when used as a coping strategy towards unpleasant life situations. The feeling of loneliness is an emotion present during the adolescence. However, when in excess, it can lead to suicidal ideations. We questioned ourselves on the impact of an excessive use of the Internet by adolescents, with their feeling of loneliness and the risks of suicidal ideations. We attempted to find an answer to this question by performing a literature review. We found one result matching our search criteria’s, which is itself a literature review. We noted the absence of studies with regards to the interaction between the feeling of loneliness, the addiction to the Internet, and the risk of suicidal ideations amongst adolescents. We established a theoretical model which could be used as a lead for future research. We insist on the importance that studies are made in this domain, in order to enable us to establish efficient preventive measure on the risks of suicidal ideations amongst adolescents.

A Smart Home is characterized by the presence of a huge number of small, low power devices, along with more classical devices. According to the Internet of Things (IoT) paradigm, all of them are expected to be always connected to the Internet in order to provide enhanced services. In this scenario, an attacker can undermine both the network security and the user’s security/privacy. Traditional security measures are not sufficient, because they are too difficult to setup and are either too weak to effectively protect the user or too limiting for the new services effectiveness. The paper suggests to dynamically adapt the security level of the smart home network according to the user perceived risk level what we have called network sentiment analysis. The security level is not fixed, established by a central system (usually by the Internet Service Provider) but can be changed with the users cooperation. The security of the smart home network is improved by a distributed firewalling and Intrusion Detection Systems both to the smart home side as to the Internet Service Provider side. These two parts must cooperate and integrate their actions for reacting dynamically to new and ongoing threats. Moreover, the level of network sentiment detected can be propagate to nearby home networks (e.g. the smart home networks of the apartments inside a building) to increase/decrease their level of security, thus creating a true in-line Intrusion Prevention System (IPS). The paper also presents a test bed for Smart Home to detect and counteract to different attacks against the IoT devices,,Wi-Fi and Ethernet connections .

Using data from the China Family Panel Studies, this study examines the socioeconomic characteristics of Internet users, as well as the relationships between the dynamics of different forms of online activities and the subjective well-being of urbanites and rural migrants in urban China. The study finds that online behaviour may clearly reflect differences in individuals’ personal traits and socioeconomic positions. Patterns of the association between online activities and subjective well-being tend to differ among rural migrants and urbanites, especially in terms of depression. A difference-in-differences model is employed to estimate the impact of intensified engagement in online activities on depression and life satisfaction from 2010 to 2016. The results show that increased frequency of online entertainment exhibits a comparatively positive effect on depression and life satisfaction. Spending more time on online social networking has a similar impact on rural migrants, but not on urbanites. These findings suggest that the rapid development of urban China’s online community has important implications for residents’ subjective well-being.

This article conducts a literature review of current and future challenges in the use of artificial intelligence (AI) in cyber physical systems. The literature review is focused on identifying a conceptual framework for increasing resilience with AI through automation supporting both, a technical and human level. The methodology applied resembled a literature review and taxonomic analysis of complex internet of things (IoT) interconnected and coupled cyber physical systems. There is an increased attention on propositions on models, infrastructures and frameworks of IoT in both academic and technical papers. These reports and publications frequently represent a juxtaposition of other related systems and technologies (e.g. Industrial Internet of Things, Cyber Physical Systems, Industry 4.0 etc.). We review academic and industry papers published between 2010 and 2020. The results determine a new hierarchical cascading conceptual framework for analysing the evolution of AI decision-making in cyber physical systems. We argue that such evolution is inevitable and autonomous because of the increased integration of connected devices (IoT) in cyber physical systems. To support this argument, taxonomic methodol- ogy is adapted and applied for transparency and justifications of concepts selection decisions through building summary maps that are applied for designing the hierarchical cascading conceptual framework.

Sperm capacitation involves biochemical and physiological changes that enable sperm to fertilize the oocyte. It can be induced in vitro under controlled conditions that simulate the environment of the oviduct. While extensively studied in mammals, its approach in lizards remains absent. Understanding the mechanisms that facilitate reproduction is essential for advancing the implementation of assisted reproductive technologies in this group. Fifteen males of Sceloporus torquatus were collected during the early stage of the reproductive season. The sperm were isolated from the seminal plasma and then diluted up to a volume of 150 μl using BWW medium to incubate with 5% CO2 at 30 °C for a maximum duration of 3 hours. A fraction was retrieved hourly for ongoing sperm assessment. We found that total motility is maintained up to 2 hours post-incubation, after which it decreased. However, sperm viability remained constant. From that moment on, we observed a transition to a deeper and less symmetrical flagellar bending in many spermatozoa. The chlortetracycline assay indicated a reduction in the percentage of sperm showing the F pattern and an increase in those exhibiting the capacitated (B) and reactive (RA) patterns, accompanied by an elevation in the percentage of damaged acrosomes as revealed by the lectin binding assay. In mammals, these changes are often associated with sperm capacitation. These observations support the notion that this process may also occur in saurian.

Chemical process control relies on a tightly controlled, narrow range of margins for critical variables, ensuring process stability and safeguarding equipment from potential accidents. The availability of historical process data is limited to a specific setpoint of operation. This challenge raises issues for process monitoring in predicting and adjusting to deviations outside of the range of operational parameters. Therefore, this paper proposes simulation-assisted deep transfer learning for predicting and optimizing the final purity and production capacity of the glycerin purification process. The proposed network is trained by the simulation domain to generate a base feature extractor, which is then fine-tuned using few-shot learning techniques on the target learner to extend the working domain of the model beyond the historical practice. The result shows that the proposed model improved prediction performance by 99% in predicting water content and 79.72% in glycerin prediction over the conventional deep learning model. Additionally, the implementation of the proposed model identified the production and product quality improvement for enhancing the glycerin purification process.

Alginate, a biopolymer promising in food, biomedical, pharmaceutical, and electronic materials industries, is characterized by its biodegradability, biocompatibility, low toxicity, and gel-forming properties. It is most abundantly found in brown algae. However, conventional dilute acid and alkali extraction methods face limitations in commercialization due to their long processing time, low throughput, and high solvent requirements. In this study, a microwave-assisted extraction (MAE) process for sodium alginate was designed to improve extraction efficiency. Solid/liquid ratio, extraction temperature, and extraction solvent concentration were major variables affecting sodium alginate extraction from Undaria pinnatifida(sea mustard). They were then statistically optimized using response surface methodology. Under optimal conditions (13.27 g/L, 91.86 ℃, 2.51 %(w/v), and 15 min), the yield was 38.41 %, which was 93.43 % of the theoretical content of sodium alginate in Undaria pinnatifida. Our work has confirmed the productivity and industrial feasibility of efficient extraction of sodium alginate from marine biomass, and we hope that it will serve as an encouraging case for the application of biopolymers as one of the desirable options for alternative petrochemicals to construct a sustainable society.

Catheter-based revascularization procedures developed as an alternative of systemic thrombolysis for patients at intermediate-high and high-risk pulmonary embolism. USAT IH-PE is a retrospective and prospective multicenter registry of such patients treated with ultrasound-facilitated, catheter-directed thrombolysis, whose preliminary results are presented in this study. The primary endpoint was the incidence of pulmonary hypertension (PH) at follow up. Secondary endpoints were short- and mid-term changes in echocardiographic parameters of right ventricle (RV) function, in-hospital and all-cause mortality, and procedure-related bleeding events. Between March 2018 and July 2023, 102 patients were included. The majority were at intermediate-high risk PE (86%), mostly female (57%), median age 66.5 years (IQR 56-74), and 28.4% had active cancer. Echocardiographic follow-up was available for 70 patients, and in only one the diagnosis of PH was confirmed by right heart catheterization, resulting in an incidence of 1.43% (CI 95%, 0.036-7.7). RV echocardiographic parameters improved both at 24 hours and at follow up. In-hospital mortality was 3.9% (CI 95%, 1.08-9.74) while all-cause mortality was 11% (CI 95%, 5.4-19.2). Only 12% had bleeding complications, oh whom 4.9% were BARC 3. Preliminary results from USAT IH-PE registry showed low incidence of PH, improvement in RV function and a safe profile.

Ureteral stricture (US) following ureteroscopic lithotripsy (URSL) has emerged as a serious issue due to the widespread use of laser technology. The management of complex US is challenging. This prospective study evaluated the efficacy of robot-assisted uretero-ureterostomy (RAUU) in addressing US following URSL, and analyzed the pathology of transected ureteral tissues to identify the risk factors for US during URSL. Fourteen patients, with a mean age of 49.8 years, were included in this study. The mean stricture length on radiography was 22.66 ± 7.38 mm. Nine (64.2%) patients had experienced failure with previous interventions, including eight patients who underwent endoscopic incision plus balloon dilation. At an average follow-up of 12.8 months, the overall success rates were 92.9% both clinically and radiographically, without major complications. Pathological findings revealed microcalcifications in 57.1% patients and loss of ureteral mucosa in 28.6% patients. In conclusion, this technique of RAUU via end-to-end anastomosis exhibits promise as a viable option for US following URSL in appropriately selected patients, despite serious pathological changes of the ureter. Migration to the site of ureteral perforation may be the most serious factor contributing to the development of US.

Ion beam-assisted deposition (IBAD) has been proposed as a promising texturing technology that uses film epitaxy method to obtain biaxial texture on a non-textured metal or compound substrate. Magnesium oxide (MgO) is the most well explored texturing material. In order to obtain the optimal biaxial texture, the actual thickness of the IBAD-MgO film must be controlled within 12 nm. Due to the bombardment of ion beams, IBAD-MgO has large lattice deformation, poor texture and many defects in the films. In this work, an additional homogeneous epitaxy MgO (epi-MgO) layer has been deposited on the IBAD-MgO layer by electron-beam evaporation. The biaxial texture can be optimized by the deposition of additional epi-MgO layer. The effects of growth temperature, film thickness, deposition rate and oxygen flux on the texture and morphology of the epi-MgO film were systematically studied. After the research of epi-MgO process, the best full width at half maximum (FWHM) values were 2.2 for the out-of-plane texture and 4.8° for the in-plane texture, respectively. Subsequently, the LaMnO3 cap layer and YBa2Cu3O7-x (YBCO) functional layer was deposited on the epi-MgO layer to test the quality of MgO layer. Finally, the critical current density of YBCO films is 6MA/cm2 (77K, 500nm, self-field), indicating that this research provides a high-quality MgO substrate for the YBCO layer.

Is there any possible synergic effect of fertility outcome between spindle view-assisted intracyto-plasmic sperm injection (SV-ICSI) with or without assisted oocyte activation (AOA) for patients with low fertilization rate history? To explore the answer, a retrospective study was held in our fertility center by reviewing patients receiving SV-ICSI during 2019/03 to 2023/06. Total 47 pa-tients were included, the fertility outcomes of intervention group (AOA-SV-ICSI, 14 patients) and control group (SV-ICSI, 33 patients), such as fertilization rate, blastocyst formation rate and clin-ical pregnancy rate, were analyzed. The blastocyst formation rate between groups was signifi-cantly higher in AOA-SV-ICSI group (p=0.020), but the fertilization rate and clinical pregnancy rate did not reach any statistical significance. This discovery of increased blastocyst formation rate in low fertilization rate patients could possibly help them in getting more usable embryos in fertility treatment.

Longer operating time in radical prostatectomy may escalate the risk of perioperative complications. Various factors like cancer extent, procedure’s level of difficulty, habitus and previous surgeries may lengthen robotic assisted radical prostatectomy (RARP) and therefor compromise outcomes. Objective: this study investigates the influence of operating time on outcomes after RARP in real life settings in a monocentric single surgeon study. Methods: 500 consecutive patients who underwent RARP between April 2019 and August 2022 were included. Patients were divided in three groups. Short (n=157; 31.4%) under or equal to 120 minutes, average (n=255; 51%) between 121 and 180 minutes, long (n=88; 17,6%) above 180 minutes console-time. Demographic, baseline and perioperative data were analyzed and compared between groups. Univariate logistic regression was completed to investigate the association between console-time and outcomes and to predict factors which may prolong surgery. Results: hospital stay and catheter days were significantly longer in group 3 with medians 6 and 7 days (p<0.001 and <0.001, respectively). Those findings were confirmed in univariate analysis, p=0.012 for Catheter days and p<0.001 for Hospital stay. Moreover, major complications were higher in patients with longer procedures p=0.008. Prostate volume was the only predictor for prolonged console time (p=0.005). Conclusion: RARP is a safe procedure and most patients will be discharged uneventfully. Yet longer console-time is associated with longer hospital stay, catheter days and major complications. Caution has to be taken in large prostate to avoid longer procedures, which may prevent postoperative advert events.

Advancement in biotechnology and genomics research have promoted access to DNA markers and their use in breeding programs. Genome-wide association study (GWAS), Genomic selection (GS) and Marker-Assisted Selection (MAS) are some of the applications of DNA markers in plant breeding. Researchers have suggested combining these individual applications for better selection accuracies. This study examines the potential advantages of incorporating GWAS-results into MAS and GS as well as the validity of the different methods for combining these approaches. From this study, it was concluded that number of QTNs have greater effects on prediction accuracies compared to heritability estimates. Also, the increase in prediction accuracy from the invalid method of incorporating GWAS results into GS and MAS model is similar to results recorded with using the valid approach. However, greater difference may be observed in another scenario which can lead to spurious results when used to make breeding decisions.

Background: Gastric cancer (GC) is one of the leading malignancy diseases worldwide, especially in Asian. CAST is a potential oncogene in GC carcinogenesis process. The character of macrophage infiltration in GC microenvironment was also unaddressed. Methods: We first applied machine searching in gene candidate evaluation of GC. CAST expression was analyzed via the Human Protein Atlas (HPA) and Gene Expression Profiling Interactive Analysis 2 (GEPIA2) database. Protein-protein interaction (PPI) network was downloaded from STRING. We investigated the impact of CAST on clinical prognosis using Kaplan-Meier plotter. The correlations between CAST and Lgr5 and macrophage infiltration in GC was surveyed via TIMER 2.0. Finally, GeneMANIA was also used to evaluate the possible functional linkage between genes. Results: After machine-assisted searching, CAST expression was found signicant difference in the overall survival of GC patients. STRING revealed CAST related proteomics and transcriptomics associations, mainly about CAPN family. Moreover, CAST significantly impacts the prognosis of GC from other datasets validation. Notably, high CAST expression was correlated with worse overall survival in GC patients (hazard ratio = 1.59; logrank P = 9.4 x 10-8). CAST and Lgr5 expressions were both positively correlated with WNT 2 and WNT 2B. Among GC patients in several datasets, CAST and macrophage infiltration evaluated together showed no obvious trend toward poor clinical overall survival. Conclusion: CAST plays an important role in GC clinical prognosis and is associated with WNT 2/WNT 2B/Lgr5. Our study denmostrated that CAST in GC overall survival is regulated by macrophage infiltration.

Alfalfa (Medicago sativa L.) is a perennial, outcrossing legume crop predominantly grown for hay, silage, or pasture. Intensive selection has resulted in dramatic improvement in fitness traits, including winter survival and disease resistance. However, there has been minimal improvement in other economically important traits, such as hay yield, which is still comparable to 30 years ago. Intensive phenotyping costs on this type of trait hinder high selection pressure to identify superior outcross individuals. Severe inbreeding depression inhibits the development of inbred lines with accumulated favorable alleles that exhibit heterosis. This review highlights the outcomes of inbreeding depression as well as the causes, including unmasking deleterious alleles and triggering self-incompatibility. We tracked the research efforts that unveil the genetic bases underlying deleterious alleles and self-incompatibility. The magnitudes of inbreeding depression were compared with the rate of heterozygous halved time in diploid and tetraploid organisms. To fill in the gaps between the controversy and existing hypotheses, we theorized a dosage dominant model of inheritance. The dosage dominant model is similar to the Mendelian dominance model, in which a genotype exhibits a dominant phenotype if there is a dominant allele (alphabet dominant). The difference is that in the dosage dominant model, a genotype will result in a dominant phenotype if the number of dominant alleles is equal to or greater than the number of recessive alleles. This review also includes a discussion on the development of pseudo inbreds and a hypothesis to identify deleterious alleles using bulked segregant analysis and consequently to purge deleterious alleles using marker-assisted selection, to progress toward the successful development of pure inbred lines in alfalfa.

Sustainable agricultural production is endangered by several ecological factors such as drought, extreme temperatures, excessive salts, parasitic ailments, and insect pest infestation. These challenging environmental factors may have adverse effects on future agriculture production in many countries. In modern agriculture, conventional crop breeding techniques alone are inadequate for achieving the increasing population’s food demand on a sustainable basis. The advancement of molecular genetics and related technologies are promising tools for the selection of new crop species. Gene pyramiding through marker assisted selection (MAS) and other techniques have accelerated the development of durable resistant/tolerant lines with high accuracy in the shortest possible period of time for agricultural sustainability. Gene stacking has not been fully utilized for biotic stress resistance development and quality improvement in most of the major cultivated crops. This review emphasizes on gene pyramiding techniques that are being successfully deployed in modern agriculture for improving crop tolerance to abiotic and biotic stresses for sustainable crop improvement.

The Industrial Internet of Things (IIoT) paradigm is a key research area derived from the Internet of Things (IoT). The emergence of IIoT has enabled a revolution in manufacturing and production, through the employment of various embedded sensing devices connected with each other by an IoT network, along with a collection of enabling technologies such as artificial intelligence (AI) and edge/fog computing. One of the unrivaled characteristics of IIoT is the inter-connectivity provided to industries; however, this characteristic might open the door for cyber-criminals to launch various attacks. In fact, one of the major challenges hindering the prevalent adoption of the IIoT paradigm is IoT security. Inevitably, an increasing number of research proposals have been introduced over the last decade to overcome these security concerns. To obtain an overview of this research area, conducting a literature survey of the published research is necessary, eliciting the various security requirements and their considerations. This paper provides a literature survey of IIoT security, focused on the period from 2017 to 2023. We identify IIoT security threats and classify them into three categories, based on the IIoT layer they exploit to launch these attacks. Additionally, we characterize the security requirements that these attacks violate. Finally, we highlight how emerging technologies, such as AI and edge/fog computing, can be adopted to address security concerns and enhance IIoT security.

Introduction: United Nations General Assembly has set the target of bringing down under-five child mortality to 25 deaths per 1000 live births by 2030. Understanding the determinants that bring down preventable deaths in children is important. Design: Anonymized, publicly available data from the India National Family Health Survey (NFHS-5) is collected. The sample consisted of 724,115 women in the age group of 15-49 years has been sub-grouped as urban and rural women. For better analysis of data, the country is divided into regions. Union territories are grouped in these regions as per their geographical locations. Descriptive statistical analysis and linear regression analysis was done.Result: Compared to NFHS-4 (2015-16) U5MR has reduced in almost all states of the country. The study shows more urban women have access to the Internet as compared to rural women. Child mortality is higher in rural areas in every state as compared to urban areas.Conclusion: Urban women have more access to health information because of internet access which may be the reason for lesser child mortality in urban areas compared to rural areas. Internet access for women (individual level) is far more effective in bringing down U5MR if compared to the community-level approach of Daycare centers.

Exponential increase in the number of individuals using internet has been observed in last ten years. The term "internet addiction" (IA) describes a compulsive behavior associated with any online activity that disrupts everyday social interactions. Main aim of this research was to determine variables and development predictors of Internet addiction. A total of 1,669 respondents participated in this research; 1,040 of them (62.3%) were female, 590 (35.4%) were male, and 39 (2.3%) did not want to declare their gender. The average age of the respondents was 15.09±1.757. Data were collected using an online form consisted of demographic data, questions related to the use of the Internet, the Internet Addiction Scale, and the Temperament Evaluation of Memphis, Pisa, Paris, and San Diego-auto questionnaire version (TEMPS-A) for adolescents. According to the findings of the present study, the relationship between Internet addiction and age, addictive substance use frequency, purpose, time spent on the internet, and type of temperament has been proven. Analysis results indicate that the risk of developing internet addiction is higher if an adolescent spends 1-3 hours and more than 3 hours daily (2.8 and 8.2 times, respectively). Increasing age numbers for 1 unit (year), the risk of internet addiction developing is decreasing by 11.3%. Hyperthymic temperament type decreases the risk of 70.9% of internet addiction developing. It is important to highlight importance of our results since practitioners can utilize our findings to create targeted treatments and prevent internet addiction in adolescents.

A two element Multiple Input Multiple Output UWB (Ultra-wide band) antenna is presented in this paper. The antenna is backed by the FR-4 substrate with a thickness of 1.6 mm and dielectric constant of 4.3 covering an area of 52.8 × 29 mm2. The proposed MIMO antenna consists of two single UWB antennas and a stub placed between the two antennas to reduce the mutual coupling. The proposed antenna achieves the voltage standing wave ratio (VSWR) of less than 2 and more than 86% radiation efficiency over the whole band of interest. Performance of the antenna is examined using both simulation and experiment. The design exhibits good performance characteristics in terms of bandwidth, gain, efficiency, return loss and VSWR. The proposed antenna is analyzed using the CST Microwave Studio software. The prototype model of the antenna is fabricated, tested, and measured to validate the simulation return loss results. There is acceptable agreement between the measured and simulated results.

Security in IoT systems is extremely important, as an intrusion into an IoT device or network can affect not only our domestic lives, but also industrial assets, with the potential to cause enormous damage. We discuss IoT security issues as defined by the OWASP Foundation, focusing on network related aspects. After a brief description of SDN in general and OpenFlow in particular, we discuss how SDN technologies can greatly help in designing and deploying more secure IoT networks by enhancing the cryptographic capabilities of devices, isolating devices or networks, blocking access to unwanted services, redirecting traffic to deep inspection systems, monitoring packet flows and devices, etc. These capabilities can be implemented using open-source OpenFlow controllers such as Faucet.

This report is on online banking and information systems in online banking. It throws some light on the introduction and historical background of online banking. Next, in this term report online banking information is explained in detailed. We collected a few articles, related to internet banking, on which other researchers have worked. Then further we have brief them into a table where we have mentioned their problems and limitations. Next, we discussed them in detail, giving an overview of each article. Lastly, recommendations for the online banking sectors are also mentioned.

Implications of the novel usage adoption of the internet of things in various sectors of works and life are researched and documented at pace. This is related to the overall high rate at which new technologies are adopted in modern society. Healthcare is a vital aspect of everyday activities and as such overlaps with the increasingly important role played by use of the internet and associated technologies. The purpose of this review article is to draw attention to the potential social, ethical, legal and professional limitations to using IoT in the context of healthcare. The social and ethical aspects in particular, focus on IoT usage in care of the elderly with relevant case studies as reference.

From professors overwhelmed by anxiety-driven e-mails from students, through faculty and administrative staff wasting valued time on e-mail minutia, misuse of electronic mail in the academy has become ubiquitous. After a brief overview of the unique features of e-mail communication, this study provides insight and guidelines to plan new educational activities on healthy and productive utilization of e-mail in the academy of the digital era. The overall aim is to prioritize scholarly deep work by focusing on teaching and research work, freeing working time wasted on unproductive use of e-mail.

This article will provide an overview on internet of things (IoT), 5G communication System and Distributed Clouds. The basic concepts and benefits will be briefly presented, along with current standardization activities. In a nutshell, but the research will focus on relating internet of things, 5G and Distributed Cloud Computing.

The era of Internet of Things (IoT) has begun to evolve and with this the devices around us are getting more and more connected. Vehicular Ad-hoc NETworks (VANETs) is one of the applications of IoT. VANET allow vehicles within these networks to communicate effectively with each another. VANETs can provide an extensive range of applications that support and enhance passenger safety and comfort. It is important that VANETs are applied within a safe and reliable network topology; however, the challenging nature of reaching reliable and trustworthy agreement in such distributed systems is one of the most important issues in designing a fault-tolerant system. Therefore, protocols are required so that systems can still be correctly executed, reaching agreement on the same values in a distributed system, even if certain components in the system fail. In this study, the agreement problem is revisited in a VANET with multiple damages. The proposed protocol allows all fault-free nodes (vehicles) to reach agreement with minimal rounds of message exchanges, and tolerates the maximal number of allowable faulty components in the VANET.

The Internet of Things (IoT) has a growing presence in society's daily lives. These lightweight devices can be easily deployed and maintained, enabling extensive adoption in different environments. Furthermore, one of the most promising areas for using IoT devices is healthcare, comprising devices referred to as the Internet of Medical Things (IoMT). Several examples of healthcare services are supported by IoMT devices, e.g., continuous health monitoring. Conversely, there is an increasing concern with the cybersecurity aspects of these devices, and several attacks against IoT infrastructures have been launched in the past few years. These cybersecurity concerns also apply to healthcare applications, where the tradeoff between the benefits and security of IoMT devices must be observed. Given the complexity and amount of data IoMT network traffic generates, advanced methods become especially useful in these environments. Although Machine Learning (ML) brings various techniques and solutions to improve cyberattack detection, prevention, and mitigation, essential features are not addressed in the current state-of-the-art benchmark dataset contributions. Thereupon, the main goal of this research is to propose a realistic benchmark dataset to enable the development and evaluation of IoMT security solutions. In order to accomplish this, 18 attacks were executed against an IoMT testbed composed of 40 IoMT devices (25 real devices and 15 simulated devices), considering the plurality of protocols used in healthcare (e.g., Wi-Fi, MQTT, and Bluetooth). These attacks are categorized into five classes: DDoS, DoS, Recon, MQTT, and spoofing. This effort aims to establish a baseline complementary to the state-of-the-art contributions. The outcome supports researchers in investigating and developing new solutions to make healthcare systems more secure using different mechanisms (e.g., machine learning - ML). This research goes beyond merely conducting attacks on IoMT devices. We also attempt to capture the lifecycle of these devices in different vital phases, from the moment they join the network until they leave, which is called profiling. Profiling allows the different classifiers to identify anomalies of each device individually in the healthcare network. The CICIoMT2024 dataset has been published on CIC's dataset page, making it available for other researchers to use.

The undoped and tungsten (W)-doped vanadium dioxide (VO₂) thin films were prepared by electron beam evaporation associated with ion-beam assisted deposition (IAD). The influence of different W-doped contents (3%-5%) on the optical, electrical, structural, and thermos-mechanical properties of VO₂ thin films was investigated experimentally. Spectral transmittance results showed that with the increase of W-doped contents, the transmittance in the visible light range (400-750 nm) decreases from 60.2% to 53.9%, and the transmittance in the infrared wavelength range (2.5 μm to 5.5 μm) drops from 55.8% to 15.4%. As the W-doped content increases, the residual stress in the VO₂ thin film decreases from -0.276 GPa to -0.238 GPa, but the surface roughness increases. For temperature-dependent spectroscopic measurements, heating the VO2 thin films from 30°C to 100°C showed the most significant change in transmittance for the 5% W-doped VO₂ thin film. When the heating temperature exceeds 55°C, the optical transmittance drops significantly, and the visible light transmittance drops by about 11%. Finally, X-ray Diffraction (XRD) and scanning electron microscope (SEM) were used to evaluate the microstructure characteristics of VO₂ thin films.

Currently, conventional spark-ignition engines face challenges in meeting the ever-growing demands of customers and increasingly stringent regulations regarding pollutant emissions. A combination of innovative strategies and carbon-neutral fuels is deemed necessary in order to further reduce fuel consumption and minimize engine emissions. The present work aims to assess the performance of combustion strategies using low-carbon content fuel, such as methanol M100, ignited by a plasma-assisted igniter (PAI) under ultra-lean conditions. The experimental campaign is conducted on a single-cylinder research engine at different engine speeds and low loads, moving up to the engine lean stable limits. To determine the benefits brought by the proposed strategy, referred to as M100-PAI, the obtained outcomes are compared with the ones obtained using market gasoline E5 ignited by the PAI system and conventional spark. The synergy between M100 (methanol) and Plasma Assisted Ignition (PAI) in internal combustion engines yielded notable benefits. This combination significantly improved combustion stability if compared to the other combinations tested, by extending the lean stable limit to λ=2.0, reducing cycle-to-cycle variability, and facilitating faster flame front acceleration, resulting in enhanced homogeneity. These enhancements, obtained with the combination M100-PAI, contributed to higher fuel efficiency showing a 10% efficiency gain over the combination E5-gasoline spark ignition.

Abstract: The use of IVF and related procedures has offered opportunities for couples to conceive who otherwise would remain childless. This technology is often viewed as the only option but is very expensive and not highly effective. ln an effort to improve access to care, governments are attempting to provide funding. In Ireland for example the Health Service Executive (HSE) has recently made IVF funding available through Regional Fertility Hubs. for couples who qualify. However, this policy has threatened a less invasive approach available in Ireland that can help many couples before IVF is employed. We propose that a newly emerging “medical treatment process” called Restorative Reproductive Medicine (RRM), combined with methods or apps that track biomarkers of the menstrual cycle as a prerequisite option for appropriate patients. To illustrate the effectiveness, we compared live birth rates from an established Irish RRM clinic that uses the ChartNeo app to HFEA (Human Fertilization and Embryology Authority) data, both from 2019. RRM treatment had a live birth rate of 40.4% compared to 24.4% per treatment cycle for IVF (P>0.0001). RRM twin pregnancy rate was 2.5% compared to 7% for IVF. RRM babies were usually full term and normal birth weight. Therefore, RRM is less expensive, less invasive, and more effective than IVF for most patients. This merits further evaluation and support by the HSE and other global authorities guiding health policy.

An enormous interest in the development of efficient protocols for cellulose extraction has been demonstrated in the last years, however, they were usually based on non-sustainable chemical and thermal approaches. In this work we describe a new and more sustainable method for cellulose extraction from eucalyptus and pine tree wood waste products exclusively performed using microwave-assisted radiation. The methodology includes 3 main steps: i) alkaline treatment; ii) bleaching I, using H2O2; and iii) bleaching II, an acidic treatment. Samples obtained in each step were characterized by Fourier-transform Infrared (FTIR) spectroscopy, powder X-ray diffraction (PXRD), thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The results were compared with those of starting materials, with the commercially available microcrystalline cellulose and with an industrial paper pulp. Results confirmed that for both type of wood wastes, cellulose was retained during the extractions procedures and that the removal of hemicellulose was achieved at the last step as seen by the FTIR spectra and TGA curves. The developed protocol is innovative since it constitutes an easy and quick approach to extract cellulose, from eucalyptus and pine tree wood waste using mild chemical and thermal conditions, microwave irradiation, and environmentally friendly purification steps. This approach offers the possibility of a future scale-up study to potentially apply the develop protocol to the extraction of cellulose in an industrial scale.

Cochlear implantation (CI) allows rehabilitation for patients with severe to profound hearing impairment. Although the use of a robotic assistant provides technical assistance to the surgeon, the assessment of the impact of its use on auditory outcomes remains uncertain. We aim to com-pare the hearing results of patients who underwent bilateral cochlear implantation, one side was performed with manual insertion and the other side with robot-assisted insertion. The electrode array intrascalar positioning and the surgery duration were also studied. This retrospective intra-individual study involved 10 patients who underwent bilateral cochlear implantation. The study included 2 infants and 8 adults. The unique composition of this cohort enabled us to utilize each patient as their own control. Regarding speech disyllabic recognition, pure tone average, ECAP, ratio of array translocation, basilar membrane rupture, percentage of translocated electrodes there was no difference between manual and robot-assisted CI groups. This study is the first to compare intra-individual hearing performance after cochlear implantation either manually or robot-assisted. The number of patients and the time delay between manual and robotic implantation may have led to a lack of power, but there was no apparent difference in hearing performance between manual and robotic implantation.

Background Bone fracture fixation surgery is one of the most commonly performed surgical procedures in the orthopedic field. However, fracture healing complications occur frequently, and the choice of the most optimal surgical approach often remains challenging. In the last years, computational tools have been developed with the aim to assist preoperative planning procedures of bone fracture fixation surgery. Objectives The aims of this review are (1) to provide a comprehensive overview of the state-of-the-art in computer-assisted preoperative planning of bone fracture fixation surgery, (2) to assess the clinical feasibility of the existing virtual planning approaches, and (3) to assess their clinical efficacy in terms of clinical outcomes as compared to conventional planning methods. Methods A literature search was performed in the MEDLINE-PubMed, Ovid-EMBASE, Ovid-EMCARE, Web of Science, and Cochrane libraries to identify articles reporting on the clinical use of computer-assisted preoperative planning of bone fracture fixation. Results 79 articles were included to provide an overview of the state-of-the art in virtual planning. While patient-specific geometrical model construction, virtual bone fracture reduction, and virtual fixation planning are routinely applied in virtual planning, biomechanical analysis is rarely included in the planning framework. 21 of the included studies were used to assess the feasibility and efficacy of computer-assisted planning methods. The reported total mean planning duration ranged from 22 to 258 minutes in different studies. Computer-assisted planning resulted in reduced operation time (Standardized Mean Difference (SMD): -2.19; 95% Confidence Interval (CI): -2.87, -1.50), less blood loss (SMD: -1.99; 95% CI: -2.75, -1.24), decreased frequency of fluoroscopy (SMD: -2.18; 95% CI: -2.74, -1.61), shortened fracture healing times (SMD:-0.51; 95% CI: -0.97, -0.05) and less postoperative complications (Risk Ratio (RR): 0.64, 95% CI: 0.46, 0.90). No significant differences were found in hospitalization duration. Some studies reported improvements in reduction quality and functional outcomes but these results were not pooled for meta-analysis, since the reported outcome measures were too heterogeneous. Conclusions Current computer-assisted planning approaches are feasible to be used in clinical practice and have been shown to improve clinical outcomes. Including biomechanical analysis into the framework has the potential to further improve clinical outcome.

The chemical graph theory is a subfield of mathematical chemistry which applies classic graph theory to chemical entities and phenomena. Chemical graphs are main data structures to represent chemical structures in cheminformatics. Computable properties of graphs lay the foundation for (quantitative) structure activity and structure property predictions - a core discipline of cheminformatics. It has a historic relevance for natural sciences, such as chemistry, biochemistry and biology, and is in the heart of modern disciplines, such as cheminformatics and bioinformatics. This review first covers the history of chemical graph theory, then provides an overview of its various techniques and applications for CASE, and finally summarises modern tools using chemical graph theory for CASE.

Electric field assisted combustion is an important means to improve fuel combustion efficiency. This paper conducts extensive research on flame characteristics under different forms and different application methods of electric fields, emission of soot particles and simulation status. Different flame parameter measurement methods will lead to different degrees of error, and perfect numerical simulation can make simple predictions on experimental data. Most of the current numerical simulations are in two dimensions, and it is necessary to develop a complete and accurate three-dimensional model to simulate and predict the characteristics of the flame under an electric field. The emission of soot particles is also affected by the electric field, and reasonable electric field parameters can greatly reduce the emission of soot particles. It is recommended to conduct centralized measurement of different fuels under the electric field under high pressure and temperature conditions, so as to be able to develop a wider and more accurate flame dynamics and chemical model under the electric field.

HTTP/2 video streaming has caught a lot of attentions in the development of multimedia technologies over the last few years. In HTTP/2, the server push mechanism allows the server to deliver more video segments to the client within a single request in order to deal with the requests explosion problem. As a result, recent research efforts have been focusing on utilizing such a feature to enhance the streaming experience while reducing the request-related overhead. However, current works only optimize the performance of a single client, without necessary concerns of possible influences on other clients in the same network. When multiple streaming clients compete for a shared bandwidth in HTTP/1.1, they are likely to suffer from unfairness, which is defined as the inequality in their bitrate selections. For HTTP/1.1, existing works have proven that the network-assisted solutions are effective in solving the unfairness problem. However, the feasibility of utilizing such an approach for the HTTP/2 server push has not been investigated. Therefore, in this paper, a novel proxy-based framework is proposed to overcome the unfairness problem in adaptive streaming over HTTP/2 with the server push. Experimental results confirm the outperformance of the proposed framework in ensuring the fairness, assisting the clients to avoid rebuffering events and lower bitrate degradation amplitude, while maintaining the mechanism of the server push feature.

MAPLE (matrix assisted pulsed laser evaporation) depositions of Candida Rugosa lipase were carried out from ice matrices whose composition is optimized in order to minimize conformational damage of the protein, which strongly influences its catalytic activity. To induce lid opening and to protect lipase during the MAPLE process, pentane and m-DOPA amino acid were added to the liquid matrix giving a target formed by a frozen water-lipase-pentane microemulsion. FTIR and AFM were used to investigate the structure of MAPLE deposited lipase films. The ability of MAPLE films to promote transesterification was determined by thin layer chromatography. It was shown that m-DOPA has influence on the aggregation but not on the unfolding of lipase induced by MAPLE, while the microemulsion formed by the addition of pentane to the target composition is effective in protecting lipase during the MAPLE process. MAPLE deposited lipases showed a modified specificity.

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI–TOF MS) is a commonly used technique for analyzing large biomolecules. However, the utilization of organic matrices limits the small-molecule analysis because of the interferences in the low-mass region and reproducibility issues. To overcome these limitations, a surface-assisted laser desorption/ionization (SALDI), which utilizes nanostructured metallic surfaces, has been developed. Herein, a novel approach for SALDI–MS was proposed using nanoengineered gold shell with nanogaps on the silica core (SiO2@Au NGS), which is an emerging material due to its excellent heat-generating capabilities. The gold shell thickness was controlled by adjusting the concentration of gold precursor for the growth of gold nanoparticles. SALDI-MS measurements were performed on a layer formed by drop-casting a mixture of SiO2@Au NGS and analytes. At the optimized process, the gold shell thickness was observed to be 17.2 nm, which showed the highest absorbance. The ion desorption efficiency was confirmed with a survival yield upon fragmentation. Based on the enhanced SALDI capability, SiO2@Au NGS was utilized to detect various small molecules including amino acids, sugars, and flavonoids. The limits of detection, reproducibility, and salt tolerance of SiO2@Au NGS demonstrate its potential as an effective and reliable SALDI material for small-molecule analyses.

With the increasingly online exposure of urban public spaces, the new concept of "Internet-celebrity cities" has emerged in China. The online internet-famous sites are the main characteristics of "Internet-celebrity cities". To fully understand online users' preferences in such kind of public spaces, this article took 27 typical riverfront internet-famous sites (RIFS) in Changsha city (China), as an example. Through the online images and review comments on social media platform "Xiaohongshu", the study analyzed users’ perception of RIFS specially on visual and emotional preferences. It revealed the following findings:(1) The popularity of RIFS had a significant head effect and there were far more positive emotions than neutral and negative emotions in review comments. (2) According to 5 different categories of RIFS: modern buildings with river views, restaurants with strong visual impact became the main attractions on commercial RIFS. The art exhibition RIFS attracted visitors to experience traditional culture and highlight their aesthetic pursuits. In the historical and cultural RIFS, people preferred to see the historical buildings with surrounding natural environment, as well as river and mountains views. Ecological Recreational RIFS showed the similar results with the uncultivated RIFS, for the main focus was on the ecological environment, a broader vision and the specific atmosphere. Moreover, the uncultivated RIFS showed more diversified attraction points. This study can provide a new perspective on the waterfront vitality and can offer a targeted and attractive manner for waterfront regeneration that are different from traditional methods.

Background: In India, 26 million children are born every year. These Children (0-6 years) comprise 13% of the country's total population. Methods: We used anonymized, publicly available secondary data from the India National Family Health Survey (NFHS-5). Descriptive statistical analysis and regression analysis of the data have been done. Results: The study shows a linear correlation between the variables of internet access to women and children under five years who are underweight (weight-for-age) in India. The analysis shows Goodness of Fit with an R square value of 0.9960. Conclusion: The study clearly shows that when compared, community daycare centers (AWCs) have a limited role in the child's nutrition, but Internet access to the mothers can be a determinant of the child's nutrition. Internet access to women can help reduce the number of underweight children under five years and improve overall maternal and child health as well as public health.

This work presents a unique two-element high-isolated orthogonally CPW-fed UWB Multiple Input Multiple Output (Ultra-wideband) antenna. The antenna is supported by the 52.8 × 29 mm2 FR-4 substrate, which has a dielectric constant of 4.3 and a thickness of 1.6 mm. The suggested MIMO antenna reduces mutual coupling by separating the two single UWB antennas that make up the antenna. The suggested antenna achieves a voltage standing wave ratio (VSWR) of less than two and more than 86% radiation efficiency over the whole range of interest. The antenna's performance is assessed using both modeling and experimentation. Return loss, efficiency, gain, bandwidth, and Voltage Standing Wave Ratio (VSWR) are all factors in which the design performs well. The suggested antenna is evaluated using the CST Microwave Studio. The antenna prototype model is constructed, tested, and measured in order to validate the simulation return-loss results. There is good agreement between the measured and simulated results.

The 5G technology brings many benefits already known: large connection capacity, great transmission velocities, and low latencies with high reliability. One of its core services, the massive Machine Type Communication (mMTC), theoretically allows up to one million devices connected simultaneously in a square kilometer. As the Internet of Things (IoT) devices often have very restricted resources, hampering the adoption of robust security mechanisms, they can be targets for attackers aiming to explore vulnerabilities and gain access to the 5G infrastructure. Given this concern, it is essential to know existent vulnerabilities and possible threats and solutions related to 5G-IoT, the scenarios considering IoT devices connected to 5G infrastructures. For this reason, we carried out a systematic literature review, extracting and analyzing data from 142 selected papers from conferences and journals. As the main results, we present lists with known vulnerabilities, possible threats and solutions, and some recommendations.

The potential of digital twin technology is yet to be fully realised due to its diversity and untapped potential. Digital twins enable systems’ analysis, design, optimisation, and evolution to be performed digitally or in conjunction with a cyber-physical approach to improve speed, accuracy, and efficiency over traditional engineering methods. Industry 4.0, factories of the future, and digital twins continue to benefit from the technology and provide enhanced efficiency within existing systems. Due to the lack of information and security standards associated with the transition to cyber digitisation, cybercriminals have been able to take advantage of the situation. Access to a digital twin of a product or service is equivalent to threatening the entire collection. There is a robust interaction between digital twins and artificial intelligence tools, which leads to strong interaction between these technologies, so it can be used to improve the cybersecurity of these digital platforms based on their integration with these technologies. This study aims to investigate the role of artificial intelligence in providing cybersecurity for digital twin versions of various industries, as well as the risks associated with these versions. In addition, this research serves as a road map for researchers and others interested in cybersecurity and digital security.

This study adapted and assessed a shortened version of the IAT (Internet Addiction Test) scale completed by young people aged 12 years and older regarding their online behaviors and risk of online addiction. The psychometric qualities of the reduced version - Screening IAT - youth are presented in order to validate its use in the early detection of online addiction. The total sample is composed of 3021 participants being 55.9% female and 44.1% male, with a mean age of x ̅=15 years (σ=3.028), attending junior high school (56.2%), high school (37.8%) and college (5.9%). The procedure included a factorial analysis, in which the total sample was randomly divided into three samples. An exploratory factor analysis was performed with one part of the sample, and a confirmatory factor analysis was performed with the others parts, assessing internal consistency, construct reliability, and discriminant validity. The results indicate that this reduced version of the IAT for young people has good psychometric qualities and can be applied in research and clinical settings. With this version and the parent-teacher version there is a direct contribution to a tripartite assessment of internet addiction risk.

Smart farming, as a branch of the Internet of Things (IoT), combines the recognition of agricultural economic competencies, the progress of data and information collected from connected devices with statistical analysis to characterize the essentials of the assimilated information, allowing farmers to make intelligent conclusions that will maximize the harvest benefit. However, the integration of advanced technologies requires the adoption of high-tech security approaches. In this paper, we present a framework that promises to enhance the security and privacy of smart farms by leveraging the decentralized nature of blockchain technology. The framework stores and manages data acquired from IoT devices installed in smart farms using a distributed ledger architecture, which provides secure and tamper-proof data storage and ensures the integrity and validity of the data. The study uses the AWS cloud, ESP32, the smart farm security monitoring framework, and the Ethereum Rinkeby smart contract mechanism, which enables automated execution of pre-defined rules and regulations. As a result of a proof-of-concept implementation, the system can detect and respond to security threats in real time, and the results illustrate its usefulness in improving the security of smart farms.

The conditions for safe Internet access and the development of skills enabling full participation in online environments are recognized in the Council of Europe’s strategy for child rights, from 2022. The guarantee of this right has implications for experiences inside and outside the school context. Therefore, this article aims to compare the perceptions of students from different educational levels, who participated in a digital storytelling workshop, regarding online safety, searching habits, and digital competences. Data were collected through a questionnaire survey completed by 84 Portuguese students from elementary and secondary schools. A non-parametric multivariate analysis of variance was used to identify differences as children advance across educational stages. The results revealed that secondary students tend to spend more time online, and demonstrated more advanced search skills. Interestingly, the youngest children exhibited higher competences in creating games and practicing safety measures regarding online postings. These findings emphasize the importance of schools, in a joint action with the educational community, including parents, teachers and students, developing a coordinated and vertically integrated approach to digital education that considers the children's current knowledge, attitudes, and skills as a starting point for pedagogical intervention.

First came the digital banks without offices, and then the “fintech” companies that combined technology and finance to achieve greater efficiency and new business models. Later was the turn of transport and logistics, understood as the sector whose economic activities derived from the transport of people and goods, while on the one hand, it has had a new spring thanks to factors such as online sales. Then, perhaps catalyzed by the pandemic scenario, the turn has reached education, where years ago was only a complement of traditional education, now is a central part with multiple modern methodologies. Numerous studies exist about using or implementing these e-learning procedures, but technical analysis is barely found in references. This work aims to analyze the digital transformation of the main sectors of our society, including finances, transport, and education, together with several examples of how technology was helping to fight the pandemic scenario.

Abstract: Objective: Internet gaming disorder (IGD) is an emerging psychiatric disorder that has received attention over the past decade. Few studies have attempted to describe this disorder in the Saudi population. This study aimed to examine the prevalence of IGD and associated factors. A cross-sectional study was conducted using translated Arabic and a validated questionnaire targeting both genders in Saudi Arabia. Methodology: A cross-sectional study using a validated questionnaire (IGD-20) and targeting Arabic-speaking children, youth, and transitional age including both genders. A snowball approach was used to sample our population using an electronic survey. Logistic regression was used to examine factors associated with IGD diagnosis. The study was guided by the STROBE statement. Results: Among 419 individuals who participated in the study, 171 were classified as non-IGD, 167 were at risk for IGD (RIGD), and 72 were IGD. There is no significant association between IGD diagnosis and gender, nationality, residence, and family income. Time playing per week was significantly associated with IGD diagnosis (X2=49.256, p<0.01). There is a significant association between IGD-20 groups and categorical age groups (X2=10.096, p<0.01). Among our sample, the percentages of males (54.2%) and females (45.8%) who met the criteria for IGD were comparable. Conclusion: IGD and RIGD prevalence was significantly high in both age groups. Both males and females were affected similarly.

Excessive online behaviors refer to harmful or disproportionate use of digital network applications. Such behaviors are likely to be associated with escapist motives. Our aim was to analyze whether escapism predicts excessive gambling, excessive gaming, and excessive internet use over time. A longitudinal sample of Finnish residents aged 18–75 years (N = 1,022, 51.27% male) was surveyed at three time points in 6-month intervals: April 2021 (Time 1), October–November 2021 (Time 2), April–May 2022 (Time 3). Of the original Time 1 respondents, 66.80% took part in the surveys at both Time 2 and Time 3. All surveys included measures for excessive gambling (Problem Gambling Severity Index), excessive gaming (Internet Gaming Disorder Test), and excessive internet use (Compulsive Internet Use Scale). Three escapism-specific questions were used to construct a dedicated escapism variable. Socio-demographic variables, alcohol consumption, and psychological distress were used as controls. The study was conducted with multilevel regression analyses using hybrid models. Our research showed that escapism had strong within-person effects on excessive gambling, B = 0.18, p = .003; excessive gaming, B = 0.50, p &lt; .001; and excessive internet use, B = 0.77, p &lt; .001 over time. The between-person effect of escapism was demonstrated on excessive gaming B = 0.91, p &lt;.001; and excessive internet use B = 0.61, p = .036. Adverse societal events and uncertain times can manifest in excessive online behaviors motivated by escapism, highlighting a need to focus prevention efforts on healthy coping methods.

The Internet of Things (IoT) has become one of the most attractive domains nowadays. It works by creating a special network between physical devices such as vehicles, home equipment, and other items. In recent days, the common technologies of communication such as Wi-Fi and 2G/3G/4G cellular are insufficient for the IoT networks because they are designed to serve appliances with immense processing capabilities such as laptops and PCs. Moreover, most of these technologies are centralized and use an existing infrastructure. Currently, the new communication technologies such as Z-Wave, 6LowPAN, and Thread are dedicated to the IoT and have been developed to meet its requirements. These technologies can handle many factors such as range, data requirements, security, power demands, and battery life. Nevertheless, the security issues in IoT systems have major concerns and matters because vulnerabilities in such systems may result in fatal catastrophes. In this paper, an enhanced IoT security framework for authentication and authorization is proposed and implemented to protect the IoT protocols from different types of attacks such as man-in-the-middle attack, reply attack, and brute force attack. The proposed framework combines an enhanced token authentication that has identity verification capabilities and a new sender verification mechanism on the IoT device side based on time stamp, which in turn can mitigate the need for local identity verification methods in IoT devices. The proposed IoT security framework is tested using security analysis with different types of attacks compared with previous related frameworks. The analysis shows the high capability of the proposed framework to protect IoT networks against many types of attacks compared with current available security frameworks. Finally, the proposed framework is developed using Windows application to simulate the framework phases, check its validity through the real network, and calculate the payload time is adds.

Building a widely distributed hotspot network is a very tedious task due to its complexity. Providing security, fully distributed network services, and cost-conscious impact are the major challenges behind this goal. To overcome these issues, we have presented a novel distributed hotspot network architecture with five layers that can provide large-scale hotspot coverage as an assimilated result. Our contributions to this new architecture highlight important aspects. First, scalability can be increased by including many Internet-of-Things (IoT) devices with sensors and Wi-Fi and/or LoraWAN connectivity modules. Second, hotspot owners can rent out their hotspots to create a distributed hotspot network in which the hotspots can act as an ordinary data gateway, a full-fledged hotspot miner, and a lightweight hotspot miner to earn crypto tokens as rewards for certain activities. Third, the advantages of Wi-Fi and LoraWAN can be seamlessly leveraged to achieve optimal coverage, higher network security, and suitable data transmission rate for transferring sensor data from IoT devices to remote application servers and users. Fourth, blockchain is used to enhance the decentralized behavior of the architecture presented here by providing immutability and independence from a centralized regulator and making the network architecture more reliable and transparent. The main feature of our paper is the use of the tau-computing paradigm along with hotspots to improve availability, Internet backhaul-agnostic network coverage, and synchronous update capability, and tau-aware leasing to strengthen and improve coverage. We also discuss the key challenges and future roadmap that require further investment and deployment.

Automated software bots infiltrate online surveys and corrupt data integrity, not to mention waste researcher time and budgets. Although resources exist to help keep bots out and identify bots when they do evade survey barriers, bot attacks may be a persistent problem for online surveys for a long time to come. Bots are evolving -- even as survey designers try ever more sophisticated methods to fend them off and weed their answers out. Vigilance needs to be high and the bot generators should not be under-estimated. We recount here some bot features we encountered after our own survey was attacked that helped to identify them, and that have not been detailed elsewhere. We also discuss reasons why commonly recommended strategies for how to keep bots out may not be feasible for many scientific researchers.

Rapid growth of IoT applications and their interference in our daily lives led to many different IoT devices which generates enormous data. The IoT devices’ resources are very limited, so storing and processing IoT data in the devices is very inefficient. Several resources of cloud-computing are efficiently used to handle some IoT resources issues. While using resources in the cloud centers cause some other issues, like latency in the IoT applications, which are time-critical. Thus, the technology of edge cloud has evolved recently. This technology permits storage and data processing at the network edge. This paper studies edge computing in-depth for timeless sensitive devices in IoT. In-depth, cutting-edge IoT computing systems (ECAs-IoT) are evaluated and characterized in this paper according to numerous criteria, such as information placement, improvisation facilities, reliability, and data visualization. Moreover, according to distinctive properties, the paper aims at comparing each structure in detail. The paper also highlights the significant limitations of the new ECAs-IoT and recommends solutions to them. The studies also introduce and propose solutions to some of the most important restrictions of the current ECAs-IoT. Consequently, in the edge computing domain, this survey outlines the IoT implementations. Lastly, with the use of IoT implementations for ECAs-IoT, the paper suggests four distinct scenarios.

In recent years, due to their frequent use and widespread use, IoT (Internet of Things) devices have become an attractive target for hackers. As a result of their limited network resources and complex operating systems, they are vulnerable to attacks. Using a honeypot can, therefore, be a very effective way of detecting malicious requests and capturing samples of exploits. The purpose of this article is to introduce honeypots, the rise of IoT devices, and how they can be exploited by attackers. Various honeypot ecosystems will be investigated further for capturing and analyzing information from attacks against these IoT devices. As well as how to leverage proactive strategies in terms of IoT security, it will provide insights on the attack vectors present in most IoT systems, along with understanding attack patterns.

A smartphone plummeted from a stratospheric height of 36 km (~119,000 feet), providing a complete record of its rapid descent and abrupt deceleration when it hit the ground. The smartphone was configured to collect internal sensor data at high rates. We discuss the state-of-the-art of smartphone environmental and sensing capabilities at the closing of year 2020 and present a flexible mobile sensor data model. The associated open-source application programing interface (API) and python software development kit (SDK) used in this work is transportable to any hardware platform and operating system.

In the age of next-generation computer, the role of the cloud, the internet and smart devices will become stronger. These days we all know the word smart well. This word is often used in our daily lives. The Internet of Things (IoT) will generate a variety of information from a variety of resources. It can store big data in the cloud. Fog computing acts as a signal between cloud and IoT. Fog extensions in this framework apply to material under IoT. IoT devices are called Fog nodes, which can be accessed anywhere within the network range. A blockchain is a novel way of recording in a secure sequence. Creating a new framework in the development of Internet of Things is one of the critical problems of wireless communication where solving such a problem can lead to continued growth in the use and popularity of IoT. Proposed research creates a framework for providing a framework for middleware on the internet of smart devices network for the internet of things using blockchains technology. Our great offering connects new research that integrates blockchains into the Internet of Things and provides secure Internet connection for smart devices. Blockchain (BC) Internet of Things (IoT) is a new technology that works with low-level, distributed, public and real-time leaders to maintain transactions between IoT sites. A blockchain is a series of blocks, each block being linked to its previous blocks. All blocks have cryptographic hash code, previous block hash, and its data. Transactions in BC are the basic components used to transfer data between IoT nodes. IoT nodes are a variety of portable but smart devices with embedded sensors, actuators, systems and the ability to communicate with other IoT nodes. The role of BC in IoT is to provide a process for processing secure data records using IoT nodes. BC is a protected technology that can be used publicly and openly. IoT requires this type of technology to allow secure communication between IoT nodes in different environments. Events in BC can be tracked and monitored by anyone who is certified to communicate within IoT.

Surveillance along the Kenya-Somalia border has been a big challenge that has continuously puzzled the security personnel, due to insurgency of armed militia Al-Shabaab from Somalia , the Kenyan government proposed construction of a barrier wall. This project developed a low cost wireless sensor network surveillance system to be deployed along the Kenya-Somalia border. The research study utilized two PIR sensor for detecting human intrusion, one motion is detected the sensor transmit the data via an Xbee module. Arduino microcontroller was used to process the data collected by the sensor before transmission. The system developed has two units, the Transmitter unit and a User Graphic interface running on Tuna Term software that displays the received data. During testing, the prototype system detected human intrusion, using the Arduino serial monitor the results were displayed before being package for transmission.

The rising world population has made it imperative to get rid of time-consuming and non-economical agricultural practices. Thus, advances in Internet of Things (IoT) technology have recently propelled significant advancements in agriculture, similar to several other sectors. Through the combination of IoT and Farm Management Information Systems (FMIS), field data can be automatically collected, stored, analysed and accessed by farmers in real-time. In this paper, we present Proof-of-Concept (PoC) IoT circuit and FMIS web app for precision agriculture. The IoT circuit incorporates sensors, microcontroller and Wi-Fi module, which acquire and transfer field data to the FMIS web app. We designed and simulated the IoT circuit using Proteus, Arduino Uno, and Arduino Integrated Development Environment (IDE). The FMIS PoC web app was modelled with relevant Unified Modeling Language (UML) diagrams and Django (a Python framework) was employed to implement the app. Our simulation result illustrates how essentila field parameters can be monitored remotely and seamlessly by agriculture practitioners. It further provides a blueprint for real-time precision agriculture at scale and could serve as a learning aid for students in engineering and agricultural science.

(1) Background: The importance of this article is to analyze the technological developments in the field of the Internet and Internet technologies and to determine their significance for the sustainable development which will result in the emergence of the Society 5.0; (2) The authors used automated content analysis for the analysis of 552 articles published in 306 scientific journals indexed by SCII and/or SCI - EXPANDED (Web of Science (WOS) platform) between the years 1996 and 4/2020. The goal of the research was to present the relationship between the internet and sustainable development. (3) Results: The results of the analysis show that the top four most important themes in the selected journals were “development”, “information”, “data”, and “business and services”. (4) Conclusions: Our research approach emphasizes the importance of the culmination of scientific innovation with the conceptual, technological and contextual frameworks of the internet and internet technology usage and its impact on sustainable development and emergence of the Society 5.0

The article is of a research nature. The aim of the article is to identify the role of social media in shaping personal brand. To this end, the first part discusses the concept of personal brand, components of brand capital in case of famous people, including consumer-based capital. Attention was also paid to the great importance of social media and the growing role of their users in the process of shaping personal brand. Based on the analysis of the source literature, a research gap was identified, related to the lack of empirical verification of the relationship between users’ online activity and the brand capital of famous people, also known as celebrities, associated with artistic and cultural activities. The article uses the results of direct research carried out in the years 2019-2020. The second (empirical) part of the article presents research hypotheses, methodology, as well as results and conclusions from the research. Based on 26 in-depth individual interviews that were conducted with people famous in Poland (mainly engaged in artistic and cultural activities) and surveys on a group of 324 social media users, it was shown, among others, that online activity of Internet users stimulates the brand capital of famous people. Statistically significant relationships were observed for such components of the personal brand as awareness / associations with the personal brand and for the relationship regarding the perception of the quality of activities carried out by a famous person.

Blockchain (BC) in the Internet of Things (IoT) is a novel technology that acts with decentralized, distributed, public and real-time ledger to store transactions among IoT nodes. A blockchain is a series of blocks, each block is linked to its previous blocks. Every block has the cryptographic hash code, previous block hash, and its data. The transactions in BC are the basic units that are used to transfer data between IoT nodes. The IoT nodes are different kind of physical but smart devices with embedded sensors, actuators, programs and able to communicate with other IoT nodes. The role of BC in IoT is to provide a procedure to process secured records of data through IoT nodes. BC is a secured technology that can be used publicly and openly. IoT requires this kind of technology to allow secure communication among IoT nodes in heterogeneous environment. The transactions in BC could be traced and explored through anyone who are authenticated to communicate within the IoT. The BC in IoT may help to improve the communication security. In this paper, I explored this approach, its opportunities and challenges.

Studies into the cognitive effects of alcohol have been mixed. They also present methodological challenges, often relying on self-report of alcohol consumption leading to hangover. The current study used BAC (obtained via breathalyser) and self-reported drinking behavior during a night out and related these to hangover severity and cognitive function measured over the internet in the same subjects the following morning. Volunteers were breathalysed and interviewed as they left a central entertainment district of an Australian state capital. They were provided with a unique identifier and, the following morning, logged on to a website. This included an online version of the Alcohol Hangover Severity Scale (AHSS), and number and type of drinks consumed the previous night and the eTMT-B - a validated, online analogue of the Trail Making Test B of executive function and working memory. Hangover severity was significantly correlated with one measure only, namely the previous night’s BAC (r = .228, p = .019). Completion time on the eTMT-B was significantly correlated with hangover severity ( r = .245, p = .012), previous night’s BAC (r = .197, p = .041) and time spent dinking (r = .376, p < .001). These findings confirm that alcohol hangover negatively affects cognitive functioning and that poorer working memory and executive performance correlates with hangover severity. The results also support the utility of using online measures in hangover research.

The Internet use has become an integral part of daily life, adolescents are especially at a higher risk to develop problematic Internet use (PIU). Although one of the most well-known comorbid conditions of PIU is sleep disturbance, little is known about the sex disparity in this association. This school-based survey in students of grades 7-9 was conducted to estimate the prevalence of PIU and sleep disturbance among Chinese adolescents, to test the association between PIU and sleep disturbance, and to investigate the role of the child’s sex in this association. A two-stage stratified cluster sampling method was used to recruit participants, and a two-level logistic regression models were fitted. The mean Internet addiction test scores was 37.2 (SD: 13.2), and 15.5% (736) met the criteria for PIU. After adjusting for control variables, problematic Internet users were at a higher risk of sleep disturbance (adjusted odds ratio=2.41, 95% CI=2.07-3.19). Sex-stratified analyses also demonstrated that association was greater in girls than boys. In this respect, paying more attention to the sleep patterns of adolescents who report excessive Internet use is recommended, and this early identification may be of practical importance for schools, parents, and adolescents themselves.

A brain-computer interface for controlling elements commonly used at home is presented in this paper. It includes the electroencephalography device needed to acquire signals associated to the brain activity, the algorithms for artefact reduction and event classification, and the communication protocol.

Multi-view stereo (MVS) employs multi-point photography for image point positioning and three-dimensional reconstruction technology. Recently, this technology has been introduced into the monitoring of road slopes due to advances in photography and computing technology. In general, the various phases of post-image processing procedures are applied to various photographic data. In this study a novel, automated image-monitoring system is proposed to improve the ability of automatic processing. First, an Internet of things (IoT)-based digital photography system architecture was constructed to provide automatic control of camera photography and real-time transmission of image data. In addition, a visual SfM-MVS 3D reconstruction technique was used to develop related software and hardware interfaces based on the built-in Python computing framework of Photoscan Pro. The software integrates fully automatic photography, image transmission, monitoring of data processing and product release programs. The experimental results show that the system architecture can be applied to fully automatic three-dimensional monitoring of road slopes.

Τhe concept of remote insect surveillance at large spatial scales for a number of serious insect pests of agricultural and medical importance is introduced in a series of our papers. We augment typical, low-cost plastic traps for many insect pests with the necessary optoelectronic sensors to guard the entrance of the trap in order to detect, time-stamp, GPS tag, and –in relevant cases- identify the species of the incoming insect from their wingbeat. For every important crop pest there are monitoring protocols to be followed in order to decide when to initiate a treatment procedure before a serious infestation occurs. Monitoring protocols are mainly based on specifically designed insect traps. Traditional insect monitoring suffers in that the scope of such monitoring: is curtailed by its cost, requires intensive labor, is time consuming, an expert is often needed for sufficient accuracy and can sometimes raise safety issues for humans. These disadvantages reduce the extent to which manual insect monitoring is applied and therefore its accuracy, which finally results in significant crop loss due to damage caused by pests. With the term ‘surveillance’ we intend to push the monitoring idea to unprecedented levels of information extraction regarding the presence, time-stamping detection events, species identification and population density of targeted insect pests. Insect counts as well as environmental parameters that correlate with insect’s population development are wirelessly transmitted to the central monitoring agency in real time, are visualized and streamed to statistical methods to assist enforcement of security control to insect pests. In this work we emphasize on how the traps can be self-organized in networks that collectively report data at local, regional, country, continental, and global scales using the emerging technology of the Internet of Things (IoT). This research is necessarily interdisciplinary and falls at the intersection of entomology, optoelectronic engineering, data-science and crop science and encompasses the design and implementation of low-cost, low-power technology to help reduce the extent of quantitative and qualitative crop losses by many the most significant agricultural pests. We argue that smart traps communicating through IoT to report in real-time the level of the pest population from the field straight to a human controlled agency can, in the very near future, have a profound impact on the decision making process in crop protection and will be disruptive of existing manual practices. In the present study, three cases are investigated : monitoring Rhynchophorus ferrugineus (Olivier) (Coleoptera: Curculionidae) using a) Picusan and b) Lindgren trap, and c) monitoring various stored grain beetle pests using the pitfall trap.

Previous studies suggested that trauma-focused cognitive behavior therapy (TF-CBT) is effective in reducing symptoms of post-traumatic stress disorder (PTSD) and depression in children and adolescents. However, the effects of app-assisted TF-CBT-based interventions in psychiatric clinics compared to treatment-as-usual (TAU) are under-explored. The purpose of this study was to reveal the added value of the app-assisted TF-CBT-based intervention as an add-on to TAU. The digitalized measures of the Child and Adolescent Trauma Screen (CATS), The Adolescent Dissociative Experience Scale (A-DES), Short Moods and Feelings Questionnaire (SMFQ), PTSD Checklist (PCL-5), and Children's Post-Traumatic Cognitions Inventory (CPTCI) were applied at baseline and post-treatment. The app-assisted TF-CBT-based group participants started with higher levels of negative alterations in cognition and mood compared to TAU participants but at post-treatment, no significant differences were observed between the app-assisted TF-CBT and TAU groups. Within the app-assisted TF-CBT group, post-treatment scores were significantly lower in post-traumatic stress symptoms, intrusion symptoms, alterations in arousal and reactivity, overall post-traumatic cognitions, and belief in being "a fragile person in a scary world”. Within the TAU group, post-treatment scores were notably lower just in dissociation and intrusion symptoms. The study suggests that app-assisted TF-CBT-based intervention can be effective in addressing specific trauma-related symptoms. The findings imply the necessity for screening for traumatic experiences, incorporating trauma-informed care, implementation of TF-CBT into treatment protocols, utilization of app-assisted interventions, tailoring interventions to individual needs, and comprehensive assessment and monitoring of treatment progress.

Globally, between 10% and 15% of couples experience infertility. Given the high demand for Assisted Reproductive Techniques (ART), there is growing interest in exploring modifiable factors influencing their outcomes. In this context, the objective of this review was to investigate the impact of adherence to the Mediterranean Diet (MD), recognized for its benefits in reproductive health, on ART outcomes. Methodology: A systematic review was conducted following the PRISMA methodology. International databases were consulted, selecting studies published between 2010 and 2023, in English and Spanish, involving patients aged 18-55, and examining intermediate and/or clinical outcomes of ART. Systematic reviews, meta-analyses, and animal studies were excluded. Results: Of the 9 included articles, 5 found statistically significant associations between adherence to the MD and positive outcomes in ART, such as a higher number and quality of embryos, clinical and biochemical pregnancy, and live births. However, other studies found no such associations. Conclusions: There is a potential association between adherence to the MD and ART outcomes. The evidence is very limited, necessitating further investigation.